drm/amdgpu: Fix the incomplete product number

The comments say that the product number is a 16-digit HEX string so the
buffer needs to be at least 17 characters to hold the NUL terminator. Expand
the buffer size to 20 to avoid the alignment issues.

The comment:Product number should only be 16 characters. Any
more,and something could be wrong. Cap it at 16 to be safe

Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use adev_to_drm for consistency

Keep code consistency when accessing drm_device from amdgpu driver.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc/dce: fix repeated words in comments

Delete the redundant word 'in'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'topic/nouveau-misc-2022-07-27' of git://anongit.freedesktop.org/drm/drm into drm-next

drm/nouveau-misc: display patches.

These are just some precursor and cleanup display patches from Ben,
tested by Lyude.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0R37q0mohBr_CegpYLXK2=fAH54QfAsMhHfPygTsdQA@mail.gmail.com

Merge tag 'amd-drm-next-5.20-2022-07-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amdgpu:
- VCN4 fixes
- RAS support for UMC 8.10
- ACP support for jadeite platforms
- NBIO HDP flush fixes
- Misc spelling and grammar fixes
- Runtime PM fixes
- Non-DC HPD fix
- Clean up amdgpu DM code
- DSC fixes
- Expose some additional GFXOFF data via debugfs
- More FP clean up for new DCN blocks
- PPC DC FP fixes
- DCN 3.1.4 fixes
- DC DML stack usage fixes
- GMC fixes
- SPM fixes for RDNA2

amdkfd:
- MMU notifier fix
- Mutex fix

UAPI:
- Add a comment about VCN4 unified queues
- IP version information for UMDs
  Proposed mesa change: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726181536.5759-1-alexander.deucher@amd.com

drm/nouveau/disp: move DAC load detection method

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add output class

Will be used to more cleanly implement existing method interfaces that
take some confusing (IEDTkey, inherited from VBIOS, which RM no longer
uses on Ampere) match values to determine which display path to operate
on.

Methods will be protected from racing with supervisor, and from being
called where they shouldn't be (ie. without an OR assigned).

v2:
- use ?: (lyude)
v3:
- fix return code if noacquire() method fails

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add supervisor mutex

Will be used to protect NVIF_CLASS_OUTP method calls from racing with
in-progress supervisor handling.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add conn method to query HPD pin status

And use it to bail early in DP detection and avoid futile AUX transactions.

This could be used on other connector types too in theory, but it's not
something we've ever done before and I'd rather not risk breaking working
systems without looking into it more closely.

It's safe for DP though.  We already do this by checking an AUX register
that contains HPD status and aborting the transaction.  However, this is
much deeper in the stack - after taking various mutexes, poking HW for no
good reason, and making a mess in debug logs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add connector class

Will be used to provide more solid driver interfaces in general, but
the immediate motivation is work towards fixing issues with handling
hotplug/DP IRQ events.

Its use is currently limited to where we support non-polled hotplug
already (ie. any GPU since NV40ish era, where our DCB handling works
well enough), until that gets cleaned up someday.

v2:
- use ?: (lyude)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add common channel class handling

Replaces a bunch of unnecessarily duplicated boilerplate in per-chipset
code with a simpler, common, implementation.

Channel "awaken" notify code is completely gone for now.  KMS has never
made use of it so far, and event notify handling is about to be changed
in general anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: split sor hda funcs out to their own struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: split sor dp funcs out to their own struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: replace hda func pointer check with flag

Simpler, and less error-prone than a separate set of function pointers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: merge nv50_disp_new_() and nvkm_disp_new()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: group supervisor-related struct members

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: merge head/outp/ior code into chipset files

No changes to code at all here, just shuffling it around and removing
a bunch of (now unnecessary) forward-declarations from headers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add common class handling between <nv50 and >=nv50

About to expose head/output path/connector objects everywhere, so we will
need support for child classes prior to nv50 now.

Somewhat cleaner than the code >=nv50 used previously.

v2:
- use ?: (lyude)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nv50_disp into nvkm_disp

Dump of one struct's members into another, with a couple of list
renames because of collisions.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nv50_disp_func into nvkm_disp_func

Aside from a chicken-and-egg problem with a duplicate 'root' member,
this is a straight dump of function pointers from one struct into
another.

The left-over wrapping mess in >=nv50 structs will be fixed later.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: clean up nvkm_outp constructors

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nvkm_dp into nvkm_outp

There should be no changes to code here other than modifying the
dereferences.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/amd/display: Reduce stack size in the mode support function

When we use the allmodconfig option we see the following error:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
  3799 | } // ModeSupportAndSystemConfigurationFull

This commit fixes this issue by moving part of the mode support
operation from ModeSupportAndSystemConfigurationFull to a dedicated
function.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.196

This version brings along following fixes:

- Copy crc_skip_count when duplicating CRTC state
- Add debug option for idle optimizations on cursor updates
- Disable MPC split for DCN32/321
- Add missing ODM 2:1 policy logic
- Update DCN32 and DCN321 SR latencies
- Add reinstate dram in the FPO logic
- Add dc_ctx to link_enc_create() parameters
- Cache cursor when cursor exceeds 64x64
- Add support for manual DMUB FAMS trigger
- Fix dpstreamclk programming
- Add missing AUDIO_DTO_SEL reg field
- Add OTG/ODM functions
- Use correct clock source constructor for DCN314
- Use correct DTO_SRC_SEL for 128b/132b encoding
- Add pixel rate div calcs and programming
- Remove FPU flags from DCN30 Makefile
- Create patch bounding box function for isolate FPU
- Move mclk calculation function to DML
- Remove FPU operations from dcn201 resources
- Fallback to SW cursor if SubVP + cursor too big
- Drop unnecessary FPU flags on dcn302 files
- Reboot while unplug hdcp enabled dp from mst hub
- Reset pipe count when iterating for DET override
- Calculate MALL cache lines based on Mblks required
- Fix two MPO videos in single display ODM combine mode
- Guard against zero memory channels
- Updates SubVP + SubVP DRR cases updates
- Fix OPTC function pointers for DCN314
- Add enable/disable FIFO callbacks to stream setup
- Avoid MPC infinite loop

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy crc_skip_count when duplicating CRTC state

[Why]

crc_skip_count is used to track how many frames to skip to allow the OTG
CRC engine to "warm up" before it outputs correct CRC values.
Experimentally, this seems to be 2 frames.

When duplicating CRTC states, this value was not copied to the
duplicated state. Therefore, when this state is committed, we will
needlessly wait 2 frames before outputing CRC values. Even if the CRC
engine is already warmed up.

[How]

Copy the crc_skip_count as part of dm_crtc_duplicate_state.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option for idle optimizations on cursor updates

For optimizations and debug purposes we added an option to exit idle
operations on cursor updates.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable MPC split for DCN32/321

Due to CRB, no need to rely on MPC splitting to maximize use of DET
anymore.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing ODM 2:1 policy logic

Phantom pipes must use the same configuration used in main pipes. This
commit add this check.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN32 and DCN321 SR latencies

Update worst case SR latencies according to values measured by hardware
team.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add reinstate dram in the FPO logic

In order to handle FPO correctly, we need to reinstate the dram values.
This function adds the required code to handle the vblank stretch and
the dram calculation.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dc_ctx to link_enc_create() parameters

[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Cache cursor when cursor exceeds 64x64

[Why]
When Static screen from MALL, the cursor needs to be
cached if cursor exceeds 64x64 size.

[How]
Program the bit that cache cursor in MALL when size
of the cursor exceeds 64x64.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add support for manual DMUB FAMS trigger

- Add is_drr parameter to indicate DRR is enabled on
the panel to determine whether SubVP MCLK switch
logic should be enabled

- Add DRR manual trigger in FW (instead of driver)
because manual trigger programming triggers DRR
update pending and can block SubVP MCLK switches
from taking place

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dpstreamclk programming

[WHY]
Currently programming incorrect hpo inst as well as selecting incorrect source

[HOW]
Use hpo inst instead of otg inst to select dpstreamclk inst

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing AUDIO_DTO_SEL reg field

[WHY]
Needed to program audio dto

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add OTG/ODM functions

[WHY]
Required for correct OTG_H_TIMING_CNTL programming

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use correct clock source constructor for DCN314

[WHY]
Previously was pointing to DCN3 clock constructor rather than DCN31's

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use correct DTO_SRC_SEL for 128b/132b encoding

[WHY]
DP DTO isn't used for 128b/132b encoding

[HOW]
Check current link rate to determine whether using 8b/10b or 128/132b encoding

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add pixel rate div calcs and programming

[WHY/HOW]
Need to calculate and set some pixel rate divisors on correct otg_inst

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove FPU flags from DCN30 Makefile

At this stage, we must have all the FPU code for DCN30 isolated in the
DML folder. Drop FPU flags from Makefile.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create patch bounding box function for isolate FPU

In the DCN30 resource, we have a small patch to the bounding box struct;
this patch uses FPU operations. This commit moves that specific part to
its function under the DML folder.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move mclk calculation function to DML

The function responsible for calculating the MCLK switching has FPU
operations. This commit moves it to the dcn30_fpu file.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove FPU operations from dcn201 resources

We have some FPU operations on the resource part of the DCN201. This
commit drops FPU flags and moves any required FPU code to the DML
folder.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fallback to SW cursor if SubVP + cursor too big

[Description]
- For SubVP cursor cannot be cached in MALL, therefore
we will switch to SW cursor if the cursor size exceeds
what can fit in the local DCN buffers (64x64x4)
- Returning false / failure for set_cursor_attributes will
fallback to SW cursor

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unnecessary FPU flags on dcn302 files

We already isolated the DCN302 code in the DML folder, but we forgot to
drop the FPU flags from the Makefile. This commit drops those flags.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reboot while unplug hdcp enabled dp from mst hub

[Why]
event_property_update does not check NULL pointer

[How]
check aconnector->base.state equals NULL

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset pipe count when iterating for DET override

[Why]
Coding error in DET allocation was resulting in too few DET segments
being allocated, causing underflow.

[How]
Reset pipe count each time we begin iterating through pipes for a stream.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calculate MALL cache lines based on Mblks required

[Description]
- Calculation for NumWays in MALL should be based on
number of MBlks

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix two MPO videos in single display ODM combine mode

[Why]
In single display ODM combine mode, two MPO videos ( three
 planes ) are not working

[How]
When we detect three planes, don't set odm combine 2to1 policy
 for the MPO planes.  Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
 Don't allow both videos to be on the same side of the
 display.
Add extra check when fetching free pipe for two MPO videos.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard against zero memory channels

[Why]
If BIOS doesn't specify number of memory channels then bandwidth
validation will fail due to insufficient BW in DML.

[How]
If BIOS is setting zero channels then use the default in the table.
If no entry is in the table and no BIOS value is specified then
throw an ASSERT for future developers to look into.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Updates SubVP and SubVP DRR cases

[Description]
- For any DRR cases in SubVP, don't lock for VSYNC flips
- For DCN32/321 use FW to do DRR manual trigger programming
- Add bit in SubVP cmd to indicate if the SubVP pipe is DRR

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix OPTC function pointers for DCN314

[Why]
Access violation occurs when swapping between HDMI and FRL monitors
because we're missing the immediate_disable_crtc callback and it's
required for the DCN314 clk manager.

[How]
Update the table to match the DCN31 optc functions for ones that
should be the same:
- immediate_disable_crtc
- configure_crc

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add enable/disable FIFO callbacks to stream setup

[Why]
We don't write out attributes after disabling and re-enabling the link
on some monitors, causing some, but not all, HDMI displays to fail to
lightup on DCN314.

[How]
Firmware used to do this after DIG link setup.

Since firmware is no longer doing this to support USB4 and dynamic link
remapping we'll need to add this to driver in the equivalent paths.

New optional callbacks were created in the stream encoder interface and
implementations were added for DCN314.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid MPC infinite loop

[why]
In some cases MPC tree bottom pipe ends up point to itself.  This causes
iterating from top to bottom to hang the system in an infinite loop.

[how]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.

Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable swiotlb for gmc 11.0

Enable swiotlb for gmc 11.0.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable swiotlb for gmc 10.0 (V2)

Enable swiotlb for gmc 10.0.
v2: include drm_cache.h to use the function ‘drm_need_swiotlb’

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reduce stack for dml32_CalculatePrefetchSchedule

Move stack variables to dummy structure.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

drm/amd/display: reduce stack for dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport

Move stack variables to dummy structure.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

drm/amd/display: reduce stack for dml32_CalculateVMRowAndSwath

Move stack variables to dummy structure.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

drm/amd/display: reduce stack for dml32_CalculateSwathAndDETConfiguration

Move stack variables to dummy structure.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

drm/amd/display: reduce stack size in dcn32 dml (v2)

Move additional dummy structures off the stack and into
the dummy vars structure.

Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1659:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
 1659 | }
      | ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
 3799 | } // ModeSupportAndSystemConfigurationFull
      | ^

v2: move more stuff to dummy structure, fix init order (Alex)

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

drm/amdkfd: Process notifier release callback don't take mutex

Move process queues cleanup to deferred work kfd_process_wq_release, to
avoid potential deadlock circular locking warning:

 WARNING: possible circular locking dependency detected
               the existing dependency chain (in reverse order) is:
      -> #2
        ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}:
        __flush_work+0x343/0x4a0
        svm_range_list_lock_and_flush_work+0x39/0xc0
        svm_range_set_attr+0xe8/0x1080 [amdgpu]
        kfd_ioctl+0x19b/0x600 [amdgpu]
        __x64_sys_ioctl+0x81/0xb0
        do_syscall_64+0x34/0x80
        entry_SYSCALL_64_after_hwframe+0x44/0xae

      -> #1 (&info->lock#2){+.+.}-{3:3}:
        __mutex_lock+0xa4/0x940
        amdgpu_amdkfd_gpuvm_acquire_process_vm+0x2e3/0x590
        kfd_process_device_init_vm+0x61/0x200 [amdgpu]
        kfd_ioctl_acquire_vm+0x83/0xb0 [amdgpu]
        kfd_ioctl+0x19b/0x600 [amdgpu]
        __x64_sys_ioctl+0x81/0xb0
        do_syscall_64+0x34/0x80
       entry_SYSCALL_64_after_hwframe+0x44/0xae

      -> #0 (&process->mutex){+.+.}-{3:3}:
        __lock_acquire+0x1365/0x23d0
        lock_acquire+0xc9/0x2e0
        __mutex_lock+0xa4/0x940
        kfd_process_notifier_release+0x96/0xe0 [amdgpu]
        __mmu_notifier_release+0x94/0x210
        exit_mmap+0x35/0x1f0
        mmput+0x63/0x120
        svm_range_deferred_list_work+0x177/0x2c0 [amdgpu]
        process_one_work+0x2a4/0x600
        worker_thread+0x39/0x3e0
        kthread+0x16d/0x1a0

  Possible unsafe locking scenario:

      CPU0                    CPU1
        ----                    ----
   lock((work_completion)(&svms->deferred_list_work));
                                lock(&info->lock#2);
             lock((work_completion)(&svms->deferred_list_work));
   lock(&process->mutex);

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Correct mmu_notifier_get failure handling

If process has signal pending, mmu_notifier_get_locked fails and calls
ops->free_notifier, kfd_process_free_notifier will schedule
kfd_process_wq_release as process refcount is 1, but process structure
is already freed. This use after free bug causes system crash with
different backtrace.

The fix is to increase process refcount and then decrease the refcount
after mmu_notifier_get success.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Specify supported modifiers for dcn314

Use same modifiers as for AMDGPU_FAMILY_GC_11_0_0

Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dc_version detect for dcn314

[Why]
While parsing dc_version redundant check leads to
invalid dc_version for dcn314.

[How]
Remove redundant check

Fixes: ee7b62e127c8 ("drm/amd/display: Enable DCN314 in DC")
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU code from dcn301 clk mgr to DML folder

The -mno-gnu-attribute option in dcn301 clk mgr makefile hides a soft vs
hard fp error for powerpc. After removing this flag, we can see some FPU
code remains there:

gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.o
uses soft float

Therefore, remove the -mno-gnu-attribute flag for dcn301/powerpc and
move FPU-associated code to DML folder.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU code from dcn30 clk mgr to DML folder

The -mno-gnu-attribute option in clk mgr makefile for dcn30 hides a soft
vs hard fp error for powerpc. After removing this flag, we can see some
FPU code remains there:

gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.o
uses soft float

Therefore, remove the -mno-gnu-attribute flag for dcn30/powerpc and move
FPU-associated code to DML folder.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU code on dcn21 clk_mgr

The -mno-gnu-attribute option in dcn21 clk mgr makefile hides a soft vs
hard fp error for powerpc. After removing this flag, we can see some FPU
code remains there:

/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.o uses
soft float

Therefore, remove the -mno-gnu-attribute flag for dcn21/powerpc and move
FPU-associated code to DML folder.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove useless FPU protection wrapper from dcn31_resource file

Many lines of code in dcn31_resource_construct are wrapped by DC_FP
macro to protect FPU operations; however, there is no FPU in this
region. Therefore, just remove the wrapper for clarity.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix soft-fp vs hard-fp on DCN 3.1 family for powerpc

Move remaining FPU code to DML folder that caused compilation error for
powerpc. This patch depends on [1] to prevent the error below:

/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o

[1] https://lore.kernel.org/amd-gfx/20220716195144.342960-1-mwen@igalia.com/

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.195

This version brings along following fixes:

- Isolate FPU operation for DCN32/321 under the DML folder
- Create a specific file for CRTC and plane based on amdgpu_dm
- Fix DSC issues
- Update DML logic

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop FPU code from dcn321 resource

This commit fully move the missing FPU operations from dcn321 resource
to dcn321 fpu. It also remove those FPU flags from the Makefile.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create dcn321_fpu file

The file dcn321_resource has a lot of FPU operations that should be
inside the dml folder. This commit introduces the dcn321_fpu file and
moves some of the FPU operation functions to this new file.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop FPU flags from dcn32 Makefile

This is the final commit from the FPU isolation for DCN32 and for this
reason we can finally remove flags related to FPU.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move bounding box to FPU folder

The final part of the DCN32 code that uses FPU is the bounding box code,
and this commit move it to dcn32_fpu.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move ntuple to insert entry

Move get_optimal_ntuple to the FPU code and call it inside
insert_entry_into_table_sorted.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move dlg params calculation

Move dlg params calculation to the FPU folder and make it static.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move wm and dlg calculation to FPU code

Move dcn32_calculate_wm_and_dlg from dcn32 resources to the FPU code.
Additionally, this commit adds an interface to it.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move SubVP functions to dcn32_fpu

It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move phanton stream to FPU code

This commit moves phanton FPU stream to dcn32_fpu file.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move insert entry table to the FPU code

The insert_entry_into_table_sorted function uses FPU operation and calls
other static functions support. This commit moves the insert entry
function with all the required struct and static functions to the FPU
file.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor code to handle non coherent and uncached

This simplifies existing coherence handling for Arcturus and Aldabaran
to account for !coherent && uncached scenarios.

Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add TAP_DELAYS upload support for gfx10

Support {GLOBAL/SE0/SE1/SE2/SE3}_TAP_DELAYS uploading.

v2: upload TAP_DELAYS before RLC autoload was triggered. (Hawking)

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: revise the driver reloading fix for SMU 13.0.0 and 13.0.7

The current approach breaks S3/S4 as asic reset is needed for them.
And putting SMU out of service(via SMU_MSG_PrepareMp1ForUnload) will make
that(asic reset) failed. Considering with current designs, there is
actually also asic reset involved on driver reloading. That can make
asic back to a clean state. So, the SMU_MSG_PrepareMp1ForUnload operation
will be not so necessary. Thus we will just drop the SMU_MSG_PrepareMp1ForUnload
operation. We may revise the whole driver reloading sequences when there
is a better design.

Fixes: 72aeb6ee0c78 ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct smu 13.0.0/7 mp1 state setup

Only PP_MP1_STATE_UNLOAD is supported for now. For other mp1 state, we
should just ignore it. Otherwise, there will be errors coming out.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update SMU13.0.0 driver_if header

To fit the latest 78.49.0 PMFW. Also, bump the version
to 0x2B.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable GPO feature support for SMU13.0.0

The feature is ready with latest firmwares.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update driver if header for smu_13_0_7

update driver if header for smu_13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move predict pipe to dml fpu folder

The function dcn32_predict_pipe_split uses FPU operations. This commit
moves this function to the dcn32_fpu file, and we ensure that we only
invoke it under the kernel_fpu protection.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/pm/swsmu: add ras eeprom i2c function for smu13 v13_0_0

Add ras eeprom i2c function for smu13 v13_0_0.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dcdebugmask option for disabling MPO

[Why & How]

It's useful to disable MPO when debugging or testing. Therefore, add a
dcdebugmask option to disable MPO.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add visualconfirm module parameter

[Why]

Being able to configure visual confirm at boot or in cmdline is helpful
when debugging.

[How]

Add a module parameter to configure DC visual confirm, which works the
same way as the equivalent debugfs entry.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move populate phaton function to dml

The function dcn32_helper_populate_phantom_dlg_params uses FPU
operations. For this reason, this commit moves this function to the
dcn32_fpu file, and we ensure that we only invoke it under the
kernel_fpu protection.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump driver version for IP discovery info in HW INFO

So userspace knows when it is available.

Proposed mesa patch:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add the IP discovery IP versions for HW INFO data

Use the former pad element to store the IP versions from the
IP discovery table.  This allows userspace to get the IP
version from the kernel to better align with hardware IP
versions.

Proposed mesa patch:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop FPU flags from dcn32_clk_mgr

We are working to isolate FPU operations inside the DML folder, and the
file dcn32_clk_mgr has some of these operations. This commit moves the
FPU operations inside the clock manager and creates the dcn32_fpu file
to aggregate those operations. Note that there is no functional change
ere, just moving code from one part to another.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "drm/amd/display: disable idle optimizations"

This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64.

Idle optimization was disabled due to SMU and firmware bugs. Enable it
back for DCN32. DCN321 has them enabled already

Fixes: 6a640b95b061 ("drm/amd/display: disable idle optimizations")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DML logic for unbounded req handling

[why]
Unbounded request logic in resource/DML has some issues where unbounded
request is being enabled incorrectly. SW today enables unbounded request
unconditionally in hardware, on the assumption that HW can always
support it in single pipe scenarios.

This worked until now because the same assumption is made in DML. A new
DML update is needed to fix a bug, where there are single pipe scenarios
where unbounded cannot be enabled, and this change in DML needs to be
ported in, and dcn32 resource logic fixed.

[how]
First, dcn32_resource should program unbounded req in HW according to
unbounded req enablement output from DML, as opposed to DML input.

Second, port in DML update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update Cursor Attribute MALL cache

[Why]
Cursor size can update without MALL cache update.
Update the register on cursor attribute as well.

[How]
Update cursor MALL cache on cursor attribute update.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>