netfilter: nf_tables: correct NFT_LOGLEVEL_MAX value

[ Upstream commit 92285a079eedfe104a773a7c4293f77a01f456fb ]

should be same as NFT_LOGLEVEL_AUDIT, so use -, not +.

Fixes: 7eced5ab5a73 ("netfilter: nf_tables: add NFT_LOGLEVEL_* enumeration and use it")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kdb: do a sanity check on the cpu in kdb_per_cpu()

[ Upstream commit b586627e10f57ee3aa8f0cfab0d6f7dc4ae63760 ]

The "whichcpu" comes from argv[3].  The cpu_online() macro looks up the
cpu in a bitmap of online cpus, but if the value is too high then it
could read beyond the end of the bitmap and possibly Oops.

Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: bpf: fix static check error through tightening shift amount adjustment

[ Upstream commit 69e168ebdcfcb87ce7252d4857d570f99996fa27 ]

NFP shift instruction has something special. If shift direction is left
then shift amount of 1 to 31 is specified as 32 minus the amount to shift.

But no need to do this for indirect shift which has shift amount be 0. Even
after we do this subtraction, shift amount 0 will be turned into 32 which
will eventually be encoded the same as 0 because only low 5 bits are
encoded, but shift amount be 32 will fail the FIELD_PREP check done later
on shift mask (0x1f), due to 32 is out of mask range. Such error has been
observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3.

This issue has started when indirect shift support added after which the
incoming shift amount to __emit_shf could be 0, therefore it is at that
time shift amount adjustment inside __emit_shf should have been tightened.

Fixes: 991f5b3651f6 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Pablo Cascón <pablo.cascon@netronome.com
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: riscpc: fix lack of keyboard interrupts after irq conversion

[ Upstream commit 63a0666bca9311f35017be454587f3ba903644b8 ]

Fix lack of keyboard interrupts for RiscPC due to incorrect conversion.

Fixes: e8d36d5dbb6a ("ARM: kill off set_irq_flags usage")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: meson: Don't disable PWM when setting duty repeatedly

[ Upstream commit a279345807e1e0ae79567a52cfdd9d30c9174a3c ]

There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable PWM and then enable. Delete
this operation now.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
[ Dropped code instead of hiding it behind a comment ]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: meson: Consider 128 a valid pre-divider

[ Upstream commit 51496e4446875726d50a5617a6e0e0dabbc2e6da ]

The pre-divider allows configuring longer PWM periods compared to using
the input clock directly. The pre-divider is 7 bit wide, meaning it's
maximum value is 128 (the register value is off-by-one: 0x7f or 127).

Change the loop to also allow for the maximum possible value to be
considered valid.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ebtables: CONFIG_COMPAT: reject trailing data after last rule

[ Upstream commit 680f6af5337c98d116e4f127cea7845339dba8da ]

If userspace provides a rule blob with trailing data after last target,
we trigger a splat, then convert ruleset to 64bit format (with trailing
data), then pass that to do_replace_finish() which then returns -EINVAL.

Erroring out right away avoids the splat plus unneeded translation and
error unwind.

Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam - fix caam_dump_sg that iterates through scatterlist

[ Upstream commit 8c65d35435e8cbfdf953cafe5ebe3648ee9276a2 ]

Fix caam_dump_sg by correctly determining the next scatterlist
entry in the list.

Fixes: 5ecf8ef9103c ("crypto: caam - fix sg dump")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: alienware-wmi: printing the wrong error code

[ Upstream commit 6d1f8b3d75419a8659ac916a1e9543bb3513a882 ]

The "out_data" variable is uninitialized at the point.  Originally, this
used to print "status" instead and that seems like the correct thing to
print.

Fixes: bc2ef884320b ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: davinci/vpbe: array underflow in vpbe_enum_outputs()

[ Upstream commit b72845ee5577b227131b1fef23f9d9a296621d7b ]

In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but
the problem is that "temp_index" can be negative.  This patch changes
the types to unsigned to address this array underflow bug.

Fixes: 66715cdc3224 ("[media] davinci vpbe: VPBE display driver")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap_vout: potential buffer overflow in vidioc_dqbuf()

[ Upstream commit dd6e2a981bfe83aa4a493143fd8cf1edcda6c091 ]

The "b->index" is a u32 the comes from the user in the ioctl.  It hasn't
been checked.  We aren't supposed to use it but we're instead supposed
to use the value that gets written to it when we call videobuf_dqbuf().

The videobuf_dqbuf() first memsets it to zero and then re-initializes it
inside the videobuf_status() function.  It's this final value which we
want.

Hans Verkuil pointed out that we need to check the return from
videobuf_dqbuf().  I ended up doing a little cleanup related to that as
well.

Fixes: 72915e851da9 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: aica: Fix a long-time build breakage

[ Upstream commit 534420c6ff87d3052540f1fd346e0adcff440819 ]

The build of aica sound driver has been broken since the timer API
conversion and some code rewrite.  This patch fixes the breakage by
using the common substream field, as well as a bit cleaning up wrt the
timer handling in the code.

Fixes: d522bb6a105f ("ALSA: sh: aica: Convert timers to use timer_setup()")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

l2tp: Fix possible NULL pointer dereference

[ Upstream commit 638a3a1e349ddf5b82f222ff5cb3b4f266e7c278 ]

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
PGD 0 P4D 0
Oops: 0000 [#1
CPU: 0 PID: 5697 Comm: modprobe Tainted: G        W         5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__lock_acquire+0x53/0x10b0
Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a
RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128
RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000
FS:  00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0
Call Trace:
 ? __lock_acquire+0x24e/0x10b0
 lock_acquire+0xdf/0x230
 ? flush_workqueue+0x71/0x530
 flush_workqueue+0x97/0x530
 ? flush_workqueue+0x71/0x530
 l2tp_exit_net+0x170/0x2b0 [l2tp_core
 ? l2tp_exit_net+0x93/0x2b0 [l2tp_core
 ops_exit_list.isra.6+0x36/0x60
 unregister_pernet_operations+0xb8/0x110
 unregister_pernet_device+0x25/0x40
 l2tp_init+0x55/0x1000 [l2tp_core
 ? 0xffffffffa018d000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fead031a839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839
RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003
RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80
Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core
CR2: 0000000000000128
---[ end trace 8322b2b8bf83f8e1

If alloc_workqueue fails in l2tp_init, l2tp_net_ops
is unregistered on failure path. Then l2tp_exit_net
is called which will flush NULL workqueue, this patch
add a NULL check to fix it.

Fixes: 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mdev: Fix aborting mdev child device removal if one fails

[ Upstream commit 6093e348a5e2475c5bb2e571346460f939998670 ]

device_for_each_child() stops executing callback function for remaining
child devices, if callback hits an error.
Each child mdev device is independent of each other.
While unregistering parent device, mdev core must remove all child mdev
devices.
Therefore, mdev_device_remove_cb() always returns success so that
device_for_each_child doesn't abort if one child removal hits error.

While at it, improve remove and unregister functions for below simplicity.

There isn't need to pass forced flag pointer during mdev parent
removal which invokes mdev_device_remove(). So simplify the flow.

mdev_device_remove() is called from two paths.
1. mdev_unregister_driver()
     mdev_device_remove_cb()
       mdev_device_remove()
2. remove_store()
     mdev_device_remove()

Fixes: 7b96953bc640 ("vfio: Mediated device Core driver")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mdev: Follow correct remove sequence

[ Upstream commit a6d6f4f160f76d840e59affe664b8d3159e23056 ]

mdev_remove_sysfs_files() should follow exact mirror sequence of a
create, similar to what is followed in error unwinding path of
mdev_create_sysfs_files().

Fixes: 6a62c1dfb5c7 ("vfio/mdev: Re-order sysfs attribute creation")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mdev: Avoid release parent reference during error path

[ Upstream commit 60e7f2c3fe9919cee9534b422865eed49f4efb15 ]

During mdev parent registration in mdev_register_device(),
if parent device is duplicate, it releases the reference of existing
parent device.
This is incorrect. Existing parent device should not be touched.

Fixes: 7b96953bc640 ("vfio: Mediated device Core driver")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix the afs.cell and afs.volume xattr handlers

[ Upstream commit c73aa4102f5b9f261a907c3b3df94cd2c478504d ]

Fix the ->get handlers for the afs.cell and afs.volume xattrs to pass the
source data size to memcpy() rather than target buffer size.

Overcopying the source data occasionally causes the kernel to oops.

Fixes: d3e3b7eac886 ("afs: Add metadata xattrs")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix encoding for protected management frames

[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ]

Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.

Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: fix lock order in pblk_rb_tear_down_check

[ Upstream commit 486b5aac85f6ec0b2df3e82a6a629d5eb7804db5 ]

In pblk_rb_tear_down_check() the spinlock functions are not
called in proper order.

Fixes: a4bd217 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: fix possible use after free of host

[ Upstream commit 8e1943af2986db42bee2b8dddf49a36cdb2e9219 ]

In the function mmc_alloc_host, the function put_device is called to
release allocated resources when mmc_gpio_alloc fails. Finally, the
function pointed by host->class_dev.class->dev_release (i.e.,
mmc_host_classdev_release) is used to release resources including the
host structure. However, after put_device, host is used and released
again. Resulting in a use-after-free bug.

Fixes: 1ed217194488 ("mmc: core: fix error path in mmc_host_alloc")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: rtd119x_wdt: Fix remove function

[ Upstream commit 8dd29f19512cc75ee470d7bb8ec86af199de23a8 ]

The driver registers the watchdog with devm_watchdog_register_device() but
still calls watchdog_unregister_device() on remove. Since clocks have to
be stopped when removing the driver, after the watchdog device has been
unregistered, we can not drop the call to watchdog_unregister_device().
Use watchdog_register_device() to register the watchdog.

Fixes: 2bdf6acbfead7 ("watchdog: Add Realtek RTD1295")
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: tegra210-adma: restore channel status

[ Upstream commit f33e7bb3eb922618612a90f0a828c790e8880773 ]

Status of ADMA channel registers is not saved and restored during system
suspend. During active playback if system enters suspend, this results in
wrong state of channel registers during system resume and playback fails
to resume properly. Fix this by saving following channel registers in
runtime suspend and restore during runtime resume.
 * ADMA_CH_LOWER_SRC_ADDR
 * ADMA_CH_LOWER_TRG_ADDR
 * ADMA_CH_FIFO_CTRL
 * ADMA_CH_CONFIG
 * ADMA_CH_CTRL
 * ADMA_CH_CMD
 * ADMA_CH_TC
Runtime PM calls will be inovked during system resume path if a playback
or capture needs to be resumed. Hence above changes work fine for system
suspend case.

Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix ena_com_fill_hash_function() implementation

[ Upstream commit 11bd7a00c0d8ffe33d1e926f8e789b4aea787186 ]

ena_com_fill_hash_function() didn't configure the rss->hash_func.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix incorrect test of supported hash function

[ Upstream commit d3cfe7ddbc3dfbb9b201615b7fef8fd66d1b5fe8 ]

ena_com_set_hash_function() tests if a hash function is supported
by the device before setting it.
The test returns the opposite result than needed.
Reverse the condition to return the correct value.
Also use the BIT macro instead of inline shift.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix: Free napi resources when ena_up() fails

[ Upstream commit b287cdbd1cedfc9606682c6e02b58d00ff3a33ae ]

ena_up() calls ena_init_napi() but does not call ena_del_napi() in
case of failure. This causes a segmentation fault upon rmmod when
netif_napi_del() is called. Fix this bug by calling ena_del_napi()
before returning error from ena_up().

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry

[ Upstream commit 3c6eeff295f01bdf1c6c3addcb0a04c0c6c029e9 ]

second parameter should be the index of the table rather than the value.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU

[ Upstream commit 5daab58043ee2bca861068e2595564828f3bc663 ]

The kernel parameter igfx_off is used by users to disable
DMA remapping for the Intel integrated graphic device. It
was designed for bare metal cases where a dedicated IOMMU
is used for graphic. This doesn't apply to virtual IOMMU
case where an include-all IOMMU is used.  This makes the
kernel parameter work with virtual IOMMU as well.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Consider skb reserve space based on netdev of GID

[ Upstream commit 3bf3e2b881c1412d0329ce9376dfe1518489b8fc ]

Always consider the skb reserve space based on netdevice of the GID
attribute, regardless of vlan or non vlan netdevice.

Fixes: 43c9fc509fa5 ("rdma_rxe: make rxe work over 802.1q VLAN devices")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Add missing XRC options to QP optional params mask

[ Upstream commit 8f4426aa19fcdb9326ac44154a117b1a3a5ae126 ]

The QP transition optional parameters for the various transition for XRC
QPs are identical to those for RC QPs.

Many of the XRC QP transition optional parameter bits are missing from the
QP optional mask table.  These omissions caused failures when doing XRC QP
state transitions.

For example, when trying to change the response timer of an XRC receive QP
via the RTS2RTS transition, the new timer value was ignored because
MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask
for XRC qps for the RTS2RTS transition.

Fix this by adding the missing XRC optional parameters for all QP
transitions to the opt_mask table.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Fixes: a4774e9095de ("IB/mlx5: Fix opt param mask according to firmware spec")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dwc2: gadget: Fix completed transfer size calculation in DDMA

[ Upstream commit 5acb4b970184d189d901192d075997c933b82260 ]

Fix calculation of transfer size on completion in function
dwc2_gadget_get_xfersize_ddma().

Added increment of descriptor pointer to move to next descriptor in
the loop.

Fixes: aa3e8bc81311 ("usb: dwc2: gadget: DDMA transfer start and complete")

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: fsl: fix link error against usb-gadget module

[ Upstream commit 2100e3ca3676e894fa48b8f6f01d01733387fe81 ]

The dependency to ensure this driver links correctly fails since
it can not be a loadable module:

drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral':
phy-fsl-usb.c:(.text+0x2224): undefined reference to `usb_gadget_vbus_disconnect'

Make the option 'tristate' so it can work correctly.

Fixes: 5a8d651a2bde ("usb: gadget: move gadget API functions to udc-core")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fix valid stream condition

[ Upstream commit 6a7c59c6d9f3b280e81d7a04bbe4e55e90152dce ]

A stream may specify a rate range using 'rate_min' and 'rate_max', so a
stream may be valid and not specify any rates. However, as stream cannot
be valid and not have any channel. Let's use this condition instead to
determine if a stream is valid or not.

Fixes: cde79035c6cf ("ASoC: Handle multiple codecs with split playback / capture")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

packet: in recvmsg msg_name return at least sizeof sockaddr_ll

[ Upstream commit b2cf86e1563e33a14a1c69b3e508d15dc12f804c ]

Packet send checks that msg_name is at least sizeof sockaddr_ll.
Packet recv must return at least this length, so that its output
can be passed unmodified to packet send.

This ceased to be true since adding support for lladdr longer than
sll_addr. Since, the return value uses true address length.

Always return at least sizeof sockaddr_ll, even if address length
is shorter. Zero the padding bytes.

Change v1->v2: do not overwrite zeroed padding again. use copy_len.

Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
Suggested-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-som-lv: Fix MMC1 card detect

[ Upstream commit 6a38df676a0a06bfc7ff8607ac62ccd6d95969ad ]

The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW
instead of GPIO_ACTIVE_LOW when reading the state of the CD pin.

This was previosly fixed on Torpedo, but missed on the SOM-LV

Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: iproc: Enable iProc config read for PAXBv2

[ Upstream commit 8cff995405eb0b563e7a0d2c49838611ea3f2692 ]

iProc config read flag has to be enabled for PAXBv2 instead of PAXB.

Fixes: f78e60a29d4f ("PCI: iproc: Reject unconfigured physical functions from PAXC")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_flow_offload: add entry to flowtable after confirmation

[ Upstream commit 270a8a297f42ecff82060aaa53118361f09c1f7d ]

This is fixing flow offload for UDP traffic where packets only follow
one single direction.

The flow_offload_fixup_tcp() mechanism works fine in case that the
offloaded entry remains in SYN_RECV state, given sequence tracking is
reset and that conntrack handles syn+ack packets as a retransmission, ie.

sES + synack => sIG

for reply traffic.

Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Fix lockdep warning when entering the guest

[ Upstream commit 3309bec85e60d60d6394802cb8e183a4f4a72def ]

The trace_hardirqs_on() sets current->hardirqs_enabled and from here
the lockdep assumes interrupts are enabled although they are remain
disabled until the context switches to the guest. Consequent
srcu_read_lock() checks the flags in rcu_lock_acquire(), observes
disabled interrupts and prints a warning (see below).

This moves trace_hardirqs_on/off closer to __kvmppc_vcore_entry to
prevent lockdep from being confused.

DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
WARNING: CPU: 16 PID: 8038 at kernel/locking/lockdep.c:4128 check_flags.part.25+0x224/0x280
[...]
NIP [c000000000185b84] check_flags.part.25+0x224/0x280
LR [c000000000185b80] check_flags.part.25+0x220/0x280
Call Trace:
[c000003fec253710] [c000000000185b80] check_flags.part.25+0x220/0x280 (unreliable)
[c000003fec253780] [c000000000187ea4] lock_acquire+0x94/0x260
[c000003fec253840] [c00800001a1e9768] kvmppc_run_core+0xa60/0x1ab0 [kvm_hv]
[c000003fec253a10] [c00800001a1ed944] kvmppc_vcpu_run_hv+0x73c/0xec0 [kvm_hv]
[c000003fec253ae0] [c00800001a1095dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000003fec253b00] [c00800001a1056bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[c000003fec253b90] [c00800001a0f3618] kvm_vcpu_ioctl+0x460/0x850 [kvm]
[c000003fec253d00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930
[c000003fec253db0] [c00000000041ce04] ksys_ioctl+0xc4/0x110
[c000003fec253e00] [c00000000041ce78] sys_ioctl+0x28/0x80
[c000003fec253e20] [c00000000000b5a4] system_call+0x5c/0x70
Instruction dump:
419e0034 3d220004 39291730 81290000 2f890000 409e0020 3c82ffc6 3c62ffc5
3884be70 386329c0 4bf6ea71 60000000 <0fe00000> 3c62ffc6 3863be90 4801273d
irq event stamp: 1025
hardirqs last  enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last  enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>]           (null)
---[ end trace 31180adcc848993e ]---
possible reason: unannotated irqs-off.
irq event stamp: 1025
hardirqs last  enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last  enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>]           (null)

Fixes: 8b24e69fc47e ("KVM: PPC: Book3S HV: Close race with testing for signals on guest entry", 2017-06-26)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory

[ Upstream commit a861b49273578e255426a499842cf7f465456351 ]

The "(&ctio->u.status1.sense_data)[i]" where i >= 0 expressions in
qlt_send_resp_ctio() are probably typos and should have been
"(&ctio->u.status1.sense_data[4 * i])" instead. Instead of only fixing
these typos, modify the code for storing sense data such that it becomes
easy to read. This patch fixes a Coverity complaint about accessing an
array outside its bounds.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: be25152c0d9e ("qla2xxx: Improve T10-DIF/PI handling in driver.") # v4.11.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()

[ Upstream commit c04466c17142d5eb566984372b9a5003d1900fe3 ]

The test "if (!cmd)" is not useful because it is guaranteed that cmd !=
NULL.  Instead of testing the cmd pointer, rely on the tag to decide
whether or not command allocation failed.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: 33e799775593 ("qla2xxx: Add support for QFull throttling and Term Exchange retry") # v3.18.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix a format specifier

[ Upstream commit 19ce192cd718e02f880197c0983404ca48236807 ]

Since mcmd->sess->port_name is eight bytes long, use %8phC to format that
port name instead of %phC.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") # v4.11.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: fix some definitions of inner cacheability attributes

[ Upstream commit 0f29456d08042134aff6e562d07a6365c841c4ad ]

Some definitions of Inner Cacheability attibutes need to be corrected.

Fixes: 8c828a535e29f ("irqchip/gicv3-its: Restore all cacheability attributes")
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/kexec_file: Fix potential segment overlap in ELF loader

[ Upstream commit 6339a3889ad4d0dd930ed7a1e873fb81d3e690f7 ]

When loading an ELF image via kexec_file the segment alignment is ignored
in the calculation for the load address of the next segment. When there are
multiple segments this can lead to segment overlap and thus load failure.

Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Fixes: 8be018827154 ("s390/kexec_file: Add ELF loader")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: catu: fix clang build warning

[ Upstream commit 59d63de076607a9334b11628b5c3ddda1d8f56cd ]

Clang points out a syntax error, as the etr_catu_buf_ops structure is
declared 'static' before the type is known:

In file included from drivers/hwtracing/coresight/coresight-tmc-etr.c:12:
drivers/hwtracing/coresight/coresight-catu.h:116:40: warning: tentative definition of variable with internal linkage has incomplete non-array type 'const struct etr_buf_operations' [-Wtentative-definition-incomplete-type]
static const struct etr_buf_operations etr_catu_buf_ops;
                                       ^
drivers/hwtracing/coresight/coresight-catu.h:116:21: note: forward declaration of 'struct etr_buf_operations'
static const struct etr_buf_operations etr_catu_buf_ops;

This seems worth fixing in the code, so replace pointer to the empty
constant structure with a NULL pointer. We need an extra NULL pointer
check here, but the result should be better object code otherwise,
avoiding the silly empty structure.

Fixes: 434d611cddef ("coresight: catu: Plug in CATU as a backend for ETR buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed line over 80 characters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't interrupt file writeout due to fatal errors

[ Upstream commit 14bebe3c90b326d2a0df78aed5e9de090c71d878 ]

When flushing out dirty pages, the fact that we may hit fatal errors
is not a reason to stop writeback. Those errors are reported through
fsync(), not through the flush mechanism.

Fixes: a6598813a4c5b ("NFS: Don't write back further requests if there...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Further fix file locking

[ Upstream commit 4be5975aea154e164696128d049dec9ed341585c ]

Further fix the file locking in the afs filesystem client in a number of
ways, including:

 (1) Don't submit the operation to obtain a lock from the server in a work
     queue context, but rather do it in the process context of whoever
     issued the requesting system call.

 (2) The owner of the file_lock struct at the front of the pending_locks
     queue now owns right to talk to the server.

 (3) Write locks can be instantly granted if they don't overlap with any
     other locks *and* we have a write lock on the server.

 (4) In the event of an authentication/permission error, all other matching
     pending locks requests are also immediately aborted.

 (5) Properly use VFS core locks_lock_file_wait() to distribute the server
     lock amongst local client locks, including waiting for the lock to
     become available.

Test with:

sqlite3 /afs/.../scratch/billings.sqlite <<EOF
CREATE TABLE hosts (
    hostname varchar(80),
    shorthost varchar(80),
    room varchar(30),
    building varchar(30),
    PRIMARY KEY(shorthost)
    );
EOF

With the version of sqlite3 that I have, this should fail consistently with
EAGAIN, whether or not the program is straced (which introduces some delays
between lock syscalls).

Fixes: 0fafdc9f888b ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix AFS file locking to allow fine grained locks

[ Upstream commit 68ce801ffd82e72d5005ab5458e8b9e59f24d9cc ]

Fix AFS file locking to allow fine grained locks as some applications, such
as firefox, won't work if they can't take such locks on certain state files
- thereby preventing the use of kAFS to distribute a home directory.

Note that this cannot be made completely functional as the protocol only
has provision for whole-file locks, so there exists the possibility of a
process deadlocking itself by getting a partial read-lock on a file first
and then trying to get a non-overlapping write-lock - but we got the
server's read lock with the first lock, so we're now stuck.

OpenAFS solves this by just granting any partial-range lock directly
without consulting the server - and hoping there's no remote collision.  I
want to implement that in a separate patch and it requires a bit more
thought.

Fixes: 8d6c554126b8 ("AFS: implement file locking")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Handle the error from snd_usb_mixer_apply_create_quirk()

[ Upstream commit 328e9f6973be2ee67862cb17bf6c0c5c5918cd72 ]

The error from snd_usb_mixer_apply_create_quirk() is ignored in the
current usb-audio driver code, which will continue the probing even
after the error.  Let's take it more serious.

Fixes: 7b1eda223deb ("ALSA: usb-mixer: factor out quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: axi-dmac: Don't check the number of frames for alignment

[ Upstream commit 648865a79d8ee3d1aa64aab5eb2a9d12eeed14f9 ]

In 2D transfers (for the AXI DMAC), the number of frames (numf) represents
Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful
for video transfers where screen resolutions ( X * Y ) are typically
aligned for X, but not for Y.

There is no requirement for Y_LENGTH to be aligned to the bus-width (or
anything), and this is also true for AXI DMAC.

Checking the Y_LENGTH for alignment causes false errors when initiating DMA
transfers. This change fixes this by checking only that the Y_LENGTH is
non-zero.

Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

6lowpan: Off by one handling ->nexthdr

[ Upstream commit f57c4bbf34439531adccd7d3a4ecc14f409c1399 ]

NEXTHDR_MAX is 255.  What happens here is that we take a u8 value
"hdr->nexthdr" from the network and then look it up in
lowpan_nexthdr_nhcs[].  The problem is that if hdr->nexthdr is 0xff then
we read one element beyond the end of the array so the array needs to
be one element larger.

Fixes: 92aa7c65d295 ("6lowpan: add generic nhc layer interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2659: fix unbalanced mutex_lock/unlock

[ Upstream commit 384538bda10913e5c94ec5b5d34bd3075931bcf4 ]

Avoid returning with mutex locked.

Fixes: fa8cb6444c32 ("[media] ov2659: Don't depend on subdev API")

Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect

[ Upstream commit c7861adbe37f576931650ad8ef805e0c47564b9a ]

Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus.
But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC
are pointing towards the same internal PCS. Therefore nobody is
controlling the internal PCS of eTSEC0.

Upon initial ndo_open, the SGMII link is ok by virtue of U-boot
initialization. But upon an ifdown/ifup sequence, the code path from
ndo_open -> init_phy -> gfar_configure_serdes does not get executed for
the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII
link remains down for eTSEC0. On the LS1021A-TWR board, to signal this
failure condition, the PHY driver keeps printing
'803x_aneg_done: SGMII link is not ok'.

Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match
mdio1 device.

Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: vdso: Make vdso32 installation conditional in vdso_install

[ Upstream commit ff6d27823f619892ab96f7461764840e0d786b15 ]

The 32-bit vDSO is not needed and not normally built for 64-bit
little-endian configurations.  However, the vdso_install target still
builds and installs it.  Add the same config condition as is normally
used for the build.

Fixes: e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix loop condition of hns3_get_tx_timeo_queue_info()

[ Upstream commit fa6c4084b98b82c98cada0f0d5c9f8577579f962 ]

In function hns3_get_tx_timeo_queue_info(), it should use
netdev->num_tx_queues, instead of netdve->real_num_tx_queues
as the loop limitation.

Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ipc: Fix msgque compiler warnings

[ Upstream commit a147faa96f832f76e772b1e448e94ea84c774081 ]

This fixes the various compiler warnings when building the msgque
selftest. The primary change is using sys/msg.h instead of linux/msg.h
directly to gain the API declarations.

Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs

[ Upstream commit 7893f9e1c26d1f9ea02622902ee671de45ad377b ]

Some tcpc device-drivers need to explicitly be told to watch for connection
events, otherwise the tcpc will not generate any TCPM_CC_EVENTs and devices
being plugged into the Type-C port will not be noticed.

For dual-role ports tcpm_start_drp_toggling() is used to tell the tcpc to
watch for connection events. Sofar we lack a similar callback to the tcpc
for single-role ports. With some tcpc-s such as the fusb302 this means
no TCPM_CC_EVENTs will be generated when the port is configured as a
single-role port.

This commit renames start_drp_toggling to start_toggling and since the
device-properties are parsed by the tcpm-core, adds a port_type parameter
to the start_toggling callback so that the tcpc_dev driver knows the
port-type and can act accordingly when it starts toggling.

The new start_toggling callback now always gets called if defined, instead
of only being called for DRP ports.

To avoid this causing undesirable functional changes all existing
start_drp_toggling implementations are not only renamed to start_toggling,
but also get a port_type check added and return -EOPNOTSUPP when port_type
is not DRP.

Fixes: ea3b4d5523bc("usb: typec: fusb302: Resolve fixed power role ...")
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: set sysctl_tipc_rmem and named_timeout right range

[ Upstream commit 4bcd4ec1017205644a2697bccbc3b5143f522f5f ]

We find that sysctl_tipc_rmem and named_timeout do not have the right minimum
setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem.
And named_timeout as a timeout setting should be not less than zero.

Fixes: cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf")
Fixes: a5325ae5b8bff ("tipc: add name distributor resiliency queue")
Signed-off-by: Jie Liu <liujie165@huawei.com>
Reported-by: Qiang Ning <ningqiang1@huawei.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer

[ Upstream commit 98e2630284ab741804bd0713e932e725466f2f84 ]

Currently the kfree of output.pointer can be potentially freeing
an uninitalized pointer in the case where out_data is NULL. Fix this
by reworking the case where out_data is not-null to perform the
ACPI status check and also the kfree of outpoint.pointer in one block
and hence ensuring the pointer is only freed when it has been used.

Also replace the if (ptr != NULL) idiom with just if (ptr).

Fixes: ff0e9f26288d ("platform/x86: alienware-wmi: Correct a memory leak")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask

[ Upstream commit 2fe3b4bbc93ec30a173ebae7d2b8c530416df3af ]

The register bitmask to power on/off the VPU memories was incorectly set
to 0x2 instead of 0x3. While still working, let's use the recommended
vendor value instead.

Fixes: 75fcb5ca4b46 ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset

[ Upstream commit 421db1ab287eebe80fd203eb009ae92836c586ad ]

commit beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") while
adding MSI-X callback handler, introduced dw_pcie_ep_find_capability()
and __dw_pcie_ep_find_next_cap() for finding the MSI and MSIX capability.

However if MSI or MSIX capability is the last capability (i.e there are
no additional items in the capabilities list and the Next Capability
Pointer is set to '0'), __dw_pcie_ep_find_next_cap will return '0'
even though MSI or MSIX capability may be present because of
incorrect ordering of the "next_cap_ptr" check. Fix it.

Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: android: vsoc: fix copy_from_user overrun

[ Upstream commit 060ea4271a82270be6d44e8e9aefe8f155fb5626 ]

The `np->permission' structure is smaller than the `np' structure but
sizeof(*np) worth of data is copied in there. Fix the size passed to
copy_from_user() to avoid overrun.

Fixes: 3d2ec9dcd553 ("staging: Android: Add 'vsoc' driver for cuttlefish.")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Fix the address filtering fix

[ Upstream commit 52a44f83fc2d64a5e74d5d685fad2fecc7b7a321 ]

The following recent commit:

  c60f83b813e5 ("perf, pt, coresight: Fix address filters for vmas with non-zero offset")

changes the address filtering logic to communicate filter ranges to the PMU driver
via a single address range object, instead of having the driver do the final bit of
math.

That change forgets to take into account kernel filters, which are not calculated
the same way as DSO based filters.

Fix that by passing the kernel filters the same way as file-based filters.
This doesn't require any additional changes in the drivers.

Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: c60f83b813e5 ("perf, pt, coresight: Fix address filters for vmas with non-zero offset")
Link: https://lkml.kernel.org/r/20190329091212.29870-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

[ Upstream commit e95fd518d05bfc087da6fcdea4900a57cfb083bd ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix for vport->bw_limit overflow problem

[ Upstream commit 2566f10676ba996b745e138f54f3e2f974311692 ]

When setting vport->bw_limit to hdev->tm_info.pg_info[0].bw_limit
in hclge_tm_vport_tc_info_update, vport->bw_limit can be as big as
HCLGE_ETHER_MAX_RATE (100000), which can not fit into u16 (65535).

So this patch fixes it by using u32 for vport->bw_limit.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rockchip: Fix rockchip_pcie_ep_assert_intx() bitwise operations

[ Upstream commit c577f4a5a08bb9677e12ddafb62e2f3a901de87f ]

Currently the bitwise operations on the u16 variable 'status' with
the setting ROCKCHIP_PCIE_EP_CMD_STATUS_IS are incorrect because
ROCKCHIP_PCIE_EP_CMD_STATUS_IS is 1UL<<19 which is wider than the
u16 variable.

Fix this by making status a u32.

Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"

[ Upstream commit 9ee8578d953023cc57e7e736ae48502c707c0210 ]

Since commit 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
kfree, iounmap, clk_put etc are not needed anymore in remove path.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[ commit message spelling fix ]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: fix leak of mypkt on error return path

[ Upstream commit a927e8d8ab57e696800e20cf09a72b7dfe3bbebb ]

Currently if the call to brcmf_sdiod_set_backplane_window fails then
error return path leaks mypkt. Fix this by returning by a new
error path labelled 'out' that calls brcmu_pkt_buf_free_skb to free
mypkt.  Also remove redundant check on err before calling
brcmf_sdiod_skbuff_write.

Addresses-Coverity: ("Resource Leak")
Fixes: a7c3aa1509e2 ("brcmfmac: Remove brcmf_sdiod_addrprep()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target/core: Fix a race condition in the LUN lookup code

[ Upstream commit 63f7479439c95bcd49b7dd4af809862c316c71a3 ]

The rcu_dereference(deve->se_lun) expression occurs twice in the LUN lookup
functions. Since these expressions are not serialized against deve->se_lun
assignments each of these expressions may yield a different result. Avoid
that the wrong LUN pointer is stored in se_cmd by reading deve->se_lun only
once.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Fixes: 29a05deebf6c ("target: Convert se_node_acl->device_list[] to RCU hlist") # v4.10
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix detection of out of order acks

[ Upstream commit 1a2391c30c0b9d041bc340f68df81d49c53546cc ]

The rxrpc packet serial number cannot be safely used to compute out of
order ack packets for several reasons:

 1. The allocation of serial numbers cannot be assumed to imply the order
    by which acks are populated and transmitted.  In some rxrpc
    implementations, delayed acks and ping acks are transmitted
    asynchronously to the receipt of data packets and so may be transmitted
    out of order.  As a result, they can race with idle acks.

 2. Serial numbers are allocated by the rxrpc connection and not the call
    and as such may wrap independently if multiple channels are in use.

In any case, what matters is whether the ack packet provides new
information relating to the bounds of the window (the firstPacket and
previousPacket in the ACK data).

Fix this by discarding packets that appear to wind back the window bounds
rather than on serial number procession.

Fixes: 298bc15b2079 ("rxrpc: Only take the rwind and mtu values from latest ACK")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: fix of_node leak in scmi_mailbox_check

[ Upstream commit fa7fe29a645b4da08efe8ff2392898b88f9ded9f ]

of_parse_phandle_with_args() requires the caller to call of_node_put() on
the returned args->np pointer. Otherwise the reference count will remain
incremented.

However, in this case, since we don't actually use the returned pointer,
we can simply pass in NULL.

Fixes: aa4f886f3893f ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: button: reinitialize button state upon resume

[ Upstream commit 13e962140be671f31a011543f11477af67a6c33e ]

With commit dfa46c50f65b ("ACPI / button: Fix an issue in
button.lid_init_state=ignore mode"), the lid device is considered to be
not compliant to SW_LID if the Lid state is unchanged when updating it.

This is not wrong, but we overlooked the resume case, where Lid state is
updated unconditionally in the button driver .resume() callback. And this
results in warning message "ACPI: button: The lid device is not compliant
to  SW_LID." after resume, if the machine is suspended with Lid opened and
then resumed with Lid opened.

Fix this by flushing the cached lid state before updating the Lid device
in .resume() callback.

Fixes: dfa46c50f65b ("ACPI / button: Fix an issue in button.lid_init_state=ignore mode")
Reported-and-tested-by: Zhao Lijian <lijian.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998

[ Upstream commit c0ee0e43c049a13d11e913edf875e4ee376dc84b ]

See similar issue solved by commit 5f2420ed2189
("clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998")

Without this patch, PCIe PHY init fails:

qcom-qmp-phy 1c06000.phy: pipe_clk enable failed err=-16
phy phy-1c06000.phy.0: phy init failed --> -16

Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: cbs: fix port_rate miscalculation

[ Upstream commit e0a7683d30e91e30ee6cf96314ae58a0314a095e ]

The Credit Based Shaper heavily depends on link speed to calculate
the scheduling credits, we can't properly calculate the credits if the
device has failed to report the link speed.

In that case we can't dequeue packets assuming a wrong port rate that will
result into an inconsistent credit distribution.

This patch makes sure we fail to dequeue case:

1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver
failed to set the ksettings' speed value (setting link speed to
SPEED_UNKNOWN).

Additionally we properly re calculate the port rate whenever the link speed
is changed.

Fixes: 3d0bd028ffb4a ("net/sched: Add support for HW offloading for CBS")
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Reviewed-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: use correct function prototype for of_overlay_fdt_apply()

[ Upstream commit ecb0abc1d8528015957fbd034be8bfe760363b3b ]

When CONFIG_OF_OVERLAY is not enabled the fallback stub for
of_overlay_fdt_apply() does not match the prototype for the case when
CONFIG_OF_OVERLAY is enabled. Update the stub to use the correct
function prototype.

Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Unregister chrdev if module initialization fails

[ Upstream commit c794d24ec9eb6658909955772e70f34bef5b5b91 ]

If module initialization fails after the character device has been
registered, unregister the character device. Additionally, avoid
duplicating error path code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Remove set but not used variable 'restart'

[ Upstream commit b2130cca9c8db5073b71d832da2a6c8311a8f3bb ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c: In function 'vmw_cmdbuf_work_func':
drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c:514:7: warning:
 variable 'restart' set but not used [-Wunused-but-set-variable]

It not used any more after commit dc366364c4ef ("drm/vmwgfx: Fix multiple
command buffer context use")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Fixes: dc366364c4ef ("drm/vmwgfx: Fix multiple command buffer context use")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Add missed newline in verifier verbose log

[ Upstream commit 1fbd20f8b77b366ea4aeb92ade72daa7f36a7e3b ]

check_stack_access() that prints verbose log is used in
adjust_ptr_min_max_vals() that prints its own verbose log and now they
stick together, e.g.:

  variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16
  size=1R2 stack pointer arithmetic goes out of range, prohibited for
  !root

Add missing newline so that log is more readable:
  variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16 size=1
  R2 stack pointer arithmetic goes out of range, prohibited for !root

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ehea: Fix a copy-paste err in ehea_init_port_res

[ Upstream commit c8f191282f819ab4e9b47b22a65c6c29734cefce ]

pr->tx_bytes should be assigned to tx_bytes other than
rx_bytes.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: ce45b873028f ("ehea: Fixing statistics")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: mt6397: Don't call irq_dispose_mapping.

[ Upstream commit 24db953e942bd7a983e97892bdaddf69d00b1199 ]

The IRQ mapping was changed to not being created in the rtc-mt6397
driver, so the irq_dispose_mapping is no longer needed.
Also the dev_id passed to free_irq should be the same as the last
argument passed to request_threaded_irq.
This prevents a "Trying to free already-free IRQ 274" warning when
unbinding the driver.

Fixes: e695d3a0b3b3 ("mfd: mt6397: Create irq mappings in mfd core driver")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900

[ Upstream commit d3062d1d7415cb5a37777220357aca51a491c3d7 ]

Printing "mktime64(1900, 1, 1, 0, 0, 0)" gives -2208988800.

Fixes: 83bbc5ac63326433 ("rtc: Add useful timestamp definitions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64/vdso: don't leak kernel addresses

[ Upstream commit 0f1bf7e39822476b2f921435cf990f67a61f5f92 ]

Since commit ad67b74d2469d9b8 ("printk: hash addresses printed with %p"),
two obfuscated kernel pointer are printed at every boot:

    vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))

Remove the the print completely, as it's useless without the addresses.

Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/fb-helper: generic: Call drm_client_add() after setup is done

[ Upstream commit 6e3f17ee73f7e3c2ef0e2c8fd8624b2ece8ef2c9 ]

Hotplug can happen while drm_fbdev_generic_setup() is running so move
drm_client_add() call after setup is done to avoid
drm_fbdev_client_hotplug() running in two threads at the same time.

Fixes: 9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation")
Cc: stable@vger.kernel.org
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401141358.25309-1-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios

[ Upstream commit 509c583620e9053e43d611bf1614fc3d3abafa96 ]

The original driver by default defines num_chipselects as -1.
This actually allicates an array of 65535 entries in
of_spi_register_master.

There is a side-effect for buggy device trees that (contrary to
dt-binding documentation) have no cs-gpio defined.

This mode was never supported by the driver due to limitations
of native cs and additional code complexity and is explicitly
not stated to be implemented.

To keep backwards compatibility with such buggy DTs we limit
the number of chip_selects to 1, as for all practical purposes
it is only ever realistic to use a single chip select in
native cs mode without negative side-effects.

Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/fsl/qe: Fix an error code in qe_pin_request()

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix sysc_unprepare() when no clocks have been allocated

[ Upstream commit aaa29bb01cc4bf5a87dbdb219efba3b09f259d8e ]

If we return early before ddata->clocks have been allocated we will get a
NULL pointer dereference in sysc_unprepare(). Let's fix this by returning
early when no clocks are allocated.

Fixes: 0eecc636e5a2 ("bus: ti-sysc: Add minimal TI sysc interconnect target driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: configure dma burst size to fifo trig level

[ Upstream commit f4ce428c41fb22e3ed55496dded94df44cb920fa ]

Fixes: Configure DMA burst size to be same as SPI TX/RX trigger levels
to avoid mismatch.

SPI FIFO trigger levels are calculated based on the transfer length.
So this patch moves DMA slave configuration to happen before start
of DMAs.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: flush fifos

[ Upstream commit c4fc9e5b28ff787e35137c2cc13316bb11d7657b ]

Fixes: Flush TX and RX FIFOs before start of new transfer and on FIFO
overflow or underrun errors.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: terminate dma and reset on transfer timeout

[ Upstream commit 32bd1a9551cae34e6889afa235c7afdfede9aeac ]

Fixes: terminate DMA and perform controller reset on transfer timeout
to clear the FIFO's and errors.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: fix for unpacked mode transfers

[ Upstream commit 1a89ac5b91895127f7c586ec5075c3753ca25501 ]

Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked
mode when transfer length is not a multiple of requested bits per word.

unpacked mode transfers fails when the transfer includes partial bytes in
the last word.

Total words to be written/read to/from FIFO is computed based on transfer
length and bits per word. Unpacked mode includes 0 padding bytes for partial
words to align with bits per word and these extra bytes are also accounted
for calculating bytes left to transfer in the current driver.

This causes extra bytes access of tx/rx buffers along with buffer index
position crossing actual length where remain_len becomes negative and due to
unsigned type, negative value is a 32 bit representation of signed value
and transferred bytes never meets the actual transfer length resulting in
transfer timeout and a hang.

This patch fixes this with proper computation of the actual bytes to fill in
FIFO during transmit and the actual bytes to read from FIFO during receive
ignoring 0 padded bytes.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: clear packed bit for unpacked mode

[ Upstream commit 7b3d10cdf54b8bc1dc0da21faed9789ac4da3684 ]

Fixes: Clear packed bit when not using packed mode.

Packed bit is not cleared when not using packed mode. This results
in transfer timeouts for the unpacked mode transfers followed by the
packed mode transfers.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: tw5864: Fix possible NULL pointer dereference in tw5864_handle_frame

[ Upstream commit 2e7682ebfc750177a4944eeb56e97a3f05734528 ]

'vb' null check should be done before dereferencing it in
tw5864_handle_frame, otherwise a NULL pointer dereference
may occur.

Fixes: 34d1324edd31 ("[media] pci: Add tw5864 driver")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: davinci-isif: avoid uninitialized variable use

[ Upstream commit 0e633f97162c1c74c68e2eb20bbd9259dce87cd9 ]

clang warns about a possible variable use that gcc never
complained about:

drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here
      [-Werror,-Wuninitialized]
                dm365_vpss_set_pg_frame_size(frame_size);
                                             ^~~~~~~~~~
drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here
        struct vpss_pg_frame_size frame_size;
        ^
1 error generated.

There is no initialization for this variable at all, and there
has never been one in the mainline kernel, so we really should
not put that stack data into an mmio register.

On the other hand, I suspect that gcc checks the condition
more closely and notices that the global
isif_cfg.bayer.config_params.test_pat_gen flag is initialized
to zero and never written to from any code path, so anything
depending on it can be eliminated.

To shut up the clang warning, just remove the dead code manually,
it has probably never been used because any attempt to do so
would have resulted in undefined behavior.

Fixes: 63e3ab142fa3 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: cmd-db: Fix an error code in cmd_db_dev_probe()

[ Upstream commit 93b260528020792032e50725383f27a27897bb0f ]

The memremap() function doesn't return error pointers, it returns NULL.
This code is returning "ret = PTR_ERR(NULL);" which is success, but it
should return -ENOMEM.

Fixes: 312416d9171a ("drivers: qcom: add command DB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: Avoid null pointer when failing to connect to PHY

[ Upstream commit 6146dd453e235c487d85ae4dc6cc08978a1c890f ]

When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the
day by connecting to an alternative PHY, none other than a PHY on the
switch's internal MDIO bus, at an address equal to the port's index.

However this does not take into consideration the scenario when the
switch that failed to probe an external PHY does not have an internal
MDIO bus at all.

Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()

[ Upstream commit 7f0d078667a494466991aa7133f49594f32ff6a2 ]

Commit 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") made
the call to _enable() conditional based on no oh->rst_lines_cnt. This
caused the return value to be potentially uninitialized. Curiously we see
no compiler warnings for this, probably as this gets inlined.

We call _setup_reset() from _setup() and only _setup_postsetup() if the
return value is zero. Currently the return value can be uninitialized for
cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set.

Fixes: 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior")
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: don't clear BMCR in genphy_soft_reset

[ Upstream commit d29f5aa0bc0c321e1b9e4658a2a7e08e885da52a ]

So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.

[0] https://marc.info/?t=155264050700001&r=1&w=2

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun9i: optimus: Fix fixed-regulators

[ Upstream commit c2a5b554751545023056559121a8ecf86aebe541 ]

Commit 1848f3f44444 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid
warnings") was wrong on the optimus, and instead of droping the
pinctrl-names property, it dropped the regulator-name one.

Obviously, that wasn't what was intended. Reinstate regulator-name and drop
pinctrl-names.

Fixes: 1848f3f44444 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid warnings")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: a64: Add missing PIO clocks

[ Upstream commit 562bf19611c000cb7219431c3cc78aa60c2b371e ]

The pinctrl binding mandates that we have the three clocks fed into the PIO
described.

Even though the old case is still supported for backward compatibility, we
should update our DTs to fix this.

Fixes: 6bc37fac30cf ("arm64: dts: add Allwinner A64 SoC .dtsi")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing

[ Upstream commit fa44328f4eb0b762a1fcb148809068e9646e7156 ]

Commit d02752149759 ("ARM: dts: sun8i-a23-a33: Move NAND controller device
node to sort by address") moved the NAND controller node around, but
dropped the default muxing in the process.

Reintroduce it.

Fixes: d02752149759 ("ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: mac: Fix VIA timer counter accesses

[ Upstream commit 0ca7ce7db771580433bf24454f7a1542bd326078 ]

This resolves some bugs that affect VIA timer counter accesses.
Avoid lost interrupts caused by reading the counter low byte register.
Make allowance for the fact that the counter will be decremented to
0xFFFF before being reloaded.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: tipc clang warning

[ Upstream commit 737889efe9713a0f20a75fd0de952841d9275e6b ]

When checking the code with clang -Wsometimes-uninitialized we get the
following warning:

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
      tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);

net/tipc/node.c:831:2: note: remove the 'if' if its condition is always
true
if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence
this warning
struct tipc_media_addr *maddr;

We fix this by initializing 'maddr' to NULL. For the matter of clarity,
we also test if 'xmitq' is non-empty before we use it and 'maddr'
further down in the  function. It will never happen that 'xmitq' is non-
empty at the same time as 'maddr' is NULL, so this is a sufficient test.

Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>