Michael Hudson-Doyle [Sun, 17 Jul 2022 23:16:57 +0000 (11:16 +1200)]
linux: return UNSUPPORTED from tst-mount if entering mount namespace fails
Before this the test fails if run in a chroot by a non-root user:
warning: could not become root outside namespace (Operation not permitted)
../sysdeps/unix/sysv/linux/tst-mount.c:36: numeric comparison failure
left: 1 (0x1); from: errno
right: 19 (0x13); from: ENODEV
error: ../sysdeps/unix/sysv/linux/tst-mount.c:39: not true: fd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:46: not true: r != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:48: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:52: numeric comparison failure
left: 1 (0x1); from: errno
right: 9 (0x9); from: EBADF
error: ../sysdeps/unix/sysv/linux/tst-mount.c:55: not true: mfd != -1
../sysdeps/unix/sysv/linux/tst-mount.c:58: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:61: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:65: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:68: not true: pfd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:75: not true: fd_tree != -1
../sysdeps/unix/sysv/linux/tst-mount.c:88: numeric comparison failure
left: 1 (0x1); from: errno
right: 38 (0x26); from: ENOSYS
error: 12 test failures
Checking that the test can enter a new mount namespace is more correct
than just checking the return value of support_become_root() as the test
code changes the mount namespace it runs in so running it as root on a
system that does not support mount namespaces should still skip.
Also change the test to remove the unnecessary fork.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Noah Goldstein [Wed, 13 Jul 2022 23:33:01 +0000 (16:33 -0700)]
x86: Add support to build st{p|r}{n}{cpy|cat} with explicit ISA level
1. Add default ISA level selection in non-multiarch/rtld
implementations.
2. Add ISA level build guards to different implementations.
- I.e strcpy-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to
include it as we will always use one of the ISA level 4
implementations (strcpy-evex.S).
3. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Wed, 13 Jul 2022 23:33:00 +0000 (16:33 -0700)]
x86: Add support to build wcscpy with explicit ISA level
1. Add ISA level build guards to different implementations.
- wcscpy-ssse3.S is used as ISA level 2/3/4.
- wcscpy-generic.c is only used at ISA level 1 and will
only build if compiled with ISA level == 1. Otherwise
there is no reason to include it as we will always use
wcscpy-ssse3.S
2. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Wed, 13 Jul 2022 23:32:59 +0000 (16:32 -0700)]
x86: Add support to build strcmp/strlen/strchr with explicit ISA level
1. Add default ISA level selection in non-multiarch/rtld
implementations.
2. Add ISA level build guards to different implementations.
- I.e strcmp-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to
include it as we will always use one of the ISA level 4
implementations (strcmp-evex.S).
3. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Adhemerval Zanella [Tue, 5 Jul 2022 15:58:40 +0000 (12:58 -0300)]
elf: Fix wrong fscanf usage on tst-pldd
The fix done
b2cd93fce666fdc8c9a5c64af2741a8a6940ac99 does not really
work since macro strification does not expand the sizeof nor the
arithmetic operation.
Checked on x86_64-linux-gnu.
Tulio Magno Quites Machado Filho [Thu, 7 Jul 2022 21:12:58 +0000 (18:12 -0300)]
Apply asm redirections in stdio.h before first use [BZ #27087]
Compilers may not be able to apply asm redirections to functions after
these functions are used for the first time, e.g. clang 13.
Fix [BZ #27087] by applying all long double-related asm redirections
before using functions in bits/stdio.h.
However, as these asm redirections depend on the declarations provided
by libio/bits/stdio2.h, this header was split in 2:
- libio/bits/stdio2-decl.h contains all function declarations;
- libio/bits/stdio2.h remains with the remaining contents, including
redirections.
This also adds the access attribute to __vsnprintf_chk that was missing.
Tested with build-many-glibcs.py.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Stefan Liebler [Thu, 14 Jul 2022 11:39:09 +0000 (13:39 +0200)]
S390: Define SINGLE_THREAD_BY_GLOBAL only on s390x
Starting with commit
e070501d12b47e88c1ff8c313f887976fb578938
"Replace __libc_multiple_threads with __libc_single_threaded"
the testcases nptl/tst-cancel-self and
nptl/tst-cancel-self-cancelstate are failing.
This is fixed by only defining SINGLE_THREAD_BY_GLOBAL on s390x,
but not on s390.
Starting with commit
09c76a74099826f4c6e1c4c431d7659f78112862
"Linux: Consolidate {RTLD_}SINGLE_THREAD_P definition",
SINGLE_THREAD_BY_GLOBAL was defined in
sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h.
Lateron the commit
9a973da617772eff1f351989f8995f4305a2e63c
"s390: Consolidate Linux syscall definition" consolidates the sysdep.h files
from s390-32/s390-64 subdirectories. Unfortunately the macro is now always
defined instead of only on s390-64.
As information:
TLS_MULTIPLE_THREADS_IN_TCB is also only defined for s390.
See: sysdeps/s390/nptl/tls.h
Noah Goldstein [Tue, 12 Jul 2022 19:29:10 +0000 (12:29 -0700)]
x86: Add missing rtm tests for strcmp family
Add new tests for:
strcasecmp
strncasecmp
strcmp
wcscmp
These functions all have avx2_rtm implementations so should be tested.
Noah Goldstein [Tue, 12 Jul 2022 19:29:09 +0000 (12:29 -0700)]
x86: Remove unneeded rtld-wmemcmp
wmemcmp isn't used by the dynamic loader so their no need to add an
RTLD stub for it.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:08 +0000 (12:29 -0700)]
x86: Move wcslen SSE2 implementation to multiarch/wcslen-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:07 +0000 (12:29 -0700)]
x86: Move wcschr SSE2 implementation to multiarch/wcschr-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:06 +0000 (12:29 -0700)]
x86: Move strcat SSE2 implementation to multiarch/strcat-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:05 +0000 (12:29 -0700)]
x86: Move strchr SSE2 implementation to multiarch/strchr-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:04 +0000 (12:29 -0700)]
x86: Move strrchr SSE2 implementation to multiarch/strrchr-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:03 +0000 (12:29 -0700)]
x86: Move memrchr SSE2 implementation to multiarch/memrchr-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:02 +0000 (12:29 -0700)]
x86: Move strcpy SSE2 implementation to multiarch/strcpy-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:29:01 +0000 (12:29 -0700)]
x86: Move strlen SSE2 implementation to multiarch/strlen-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:28:08 +0000 (12:28 -0700)]
x86: Move strcmp SSE42 implementation to multiarch/strcmp-sse4_2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:28:07 +0000 (12:28 -0700)]
x86: Move wcscmp SSE2 implementation to multiarch/wcscmp-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:28:06 +0000 (12:28 -0700)]
x86: Move strcmp SSE2 implementation to multiarch/strcmp-sse2.S
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Because strcmp-sse2.S implements so many functions (more from
avx2/evex/sse42) add a new file 'strcmp-naming.h' to assist in
getting the correct symbol name for all the function across
multiarch/non-multiarch builds.
Tested build on x86_64 and x86_32 with/without multiarch.
Noah Goldstein [Tue, 12 Jul 2022 19:28:05 +0000 (12:28 -0700)]
x86: Rename STRCASECMP_NONASCII macro to STRCASECMP_L_NONASCII
The previous macro name can be confusing given that both
`__strcasecmp_l_nonascii` and `__strcasecmp_nonascii` are
functions and we use the `_l` version.
Adhemerval Zanella [Wed, 13 Jul 2022 13:37:32 +0000 (10:37 -0300)]
nptl: Fix ___pthread_unregister_cancel_restore asynchronous restore
This was due a wrong revert done on
404656009b459658.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Noah Goldstein [Tue, 12 Jul 2022 18:48:04 +0000 (11:48 -0700)]
x86: Remove __mmask intrinsics in strstr-avx512.c
The intrinsics are not available before GCC7 and using standard
operators generates code of equivalent or better quality.
Removed:
_cvtmask64_u64
_kshiftri_mask64
_kand_mask64
Geometric Mean of 5 Runs of Full Benchmark Suite New / Old: 0.958
Noah Goldstein [Wed, 6 Jul 2022 00:06:41 +0000 (17:06 -0700)]
x86: Remove generic strncat, strncpy, and stpncpy implementations
These functions all have optimized versions:
__strncat_sse2_unaligned, __strncpy_sse2_unaligned, and
stpncpy_sse2_unaligned which are faster than their respective generic
implementations. Since the sse2 versions can run on baseline x86_64,
we should use these as the baseline implementation and can remove the
generic implementations.
Geometric mean of N=20 runs of the entire benchmark suite on:
11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (Tigerlake)
__strncat_sse2_unaligned / __strncat_generic: .944
__strncpy_sse2_unaligned / __strncpy_generic: .726
__stpncpy_sse2_unaligned / __stpncpy_generic: .650
Tested build with and without multiarch and full check with multiarch.
Fangrui Song [Tue, 12 Jul 2022 18:14:32 +0000 (11:14 -0700)]
i386: Remove -Wa,-mtune=i686
gas -mtune= may change NOP generating patterns but -mtune=i686 has no
difference from the default by inspecting .o and .os files.
Note: Clang doesn't support -Wa,-mtune=i686.
H.J. Lu [Fri, 8 Jul 2022 23:06:04 +0000 (16:06 -0700)]
x86-64: Remove redundant strcspn-generic/strpbrk-generic/strspn-generic
Remove redundant strcspn-generic, strpbrk-generic and strspn-generic
from sysdep_routines in sysdeps/x86_64/multiarch/Makefile added by
commit
c69f960b017b2cdf39335739009526a72fb20379
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jul 3 21:28:07 2022 -0700
x86: Add support for building str{c|p}{brk|spn} with explicit ISA level
since they have been added to sysdep_routines in sysdeps/x86_64/Makefile.
Florian Weimer [Fri, 8 Jul 2022 10:08:48 +0000 (12:08 +0200)]
elf: Rename tst-audit26 to tst-audit28
tst-audit26 and tst-audit27 are already used by aarch64.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
H.J. Lu [Thu, 7 Jul 2022 23:20:50 +0000 (16:20 -0700)]
x86-64: Don't mark symbols as hidden in strcmp-XXX.S
Don't mark symbols as hidden in strcmp-avx2.S, strcmp-evex.S and
strcmp-sse42.S since they are marked as hidden in the IFUNC selectors.
Tom Honermann [Thu, 30 Jun 2022 12:52:15 +0000 (08:52 -0400)]
stdlib: Tests for mbrtoc8, c8rtomb, and the char8_t typedef.
This change adds tests for the mbrtoc8 and c8rtomb functions adopted for
C++20 via WG21 P0482R6 and for C2X via WG14 N2653, and for the char8_t
typedef adopted for C2X from WG14 N2653.
The tests for mbrtoc8 and c8rtomb specifically exercise conversion to
and from Big5-HKSCS because of special cases that arise with that encoding.
Big5-HKSCS defines some double byte sequences that convert to more than
one Unicode code point. In order to test this, the locale dependencies
for running tests under wcsmbs is expanded to include zh_HK.BIG5-HKSCS.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Tom Honermann [Thu, 30 Jun 2022 12:52:14 +0000 (08:52 -0400)]
stdlib: Implement mbrtoc8, c8rtomb, and the char8_t typedef.
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Tom Honermann [Thu, 30 Jun 2022 12:52:13 +0000 (08:52 -0400)]
gconv: Correct Big5-HKSCS conversion to preserve all state bits. [BZ #25744]
This patch corrects the Big5-HKSCS converter to preserve the lowest 3 bits of
the mbstate_t __count data member when the converter encounters an incomplete
multibyte character.
This fixes BZ #25744.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Danila Kutenin [Mon, 27 Jun 2022 16:12:13 +0000 (16:12 +0000)]
aarch64: Optimize string functions with shrn instruction
We found that string functions were using AND+ADDP
to find the nibble/syndrome mask but there is an easier
opportunity through `SHRN dst.8b, src.8h, 4` (shift
right every 2 bytes by 4 and narrow to 1 byte) and has
same latency on all SIMD ARMv8 targets as ADDP. There
are also possible gaps for memcmp but that's for
another patch.
We see 10-20% savings for small-mid size cases (<=128)
which are primary cases for general workloads.
Xi Ruoyao [Tue, 28 Jun 2022 10:44:03 +0000 (18:44 +0800)]
test-container: return UNSUPPORTED for ENOSPC on clone()
Since Linux 4.9, the kernel provides
/proc/sys/user/max_{mnt,pid,user}_namespace as a limitation of number of
namespaces. Some distros (for example, Slint Linux 14.2.1) set them (or
only max_user_namespace) to zero as a "security policy" for disabling
namespaces.
The clone() call will set errno to ENOSPC under such a limitation. We
didn't check ENOSPC in the code so the test will FAIL, and report:
unable to unshare user/fs: No space left on device
This message is, unfortunately, very unhelpful. It leads people to
check the memory or disk space, instead of finding the real issue.
To improve the situation, we should check for ENOSPC and return
UNSUPPORTED as the test result. Also refactor check_for_unshare_hints()
to emit a proper message telling people how to make the test work, if
they really need to run the namespaced tests.
Reported-by: Philippe Delavalade <philippe.delavalade@orange.fr>
URL: https://lists.linuxfromscratch.org/sympa/arc/lfs-support/2022-06/msg00022.html
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: DJ Delorie <dj@redhat.com>
Noah Goldstein [Wed, 29 Jun 2022 23:11:22 +0000 (16:11 -0700)]
x86: Add support for building {w}memcmp{eq} with explicit ISA level
1. Refactor files so that all implementations are in the multiarch
directory
- Moved the implementation portion of memcmp sse2 from memcmp.S to
multiarch/memcmp-sse2.S
- The non-multiarch file now only includes one of the
implementations in the multiarch directory based on the compiled
ISA level (only used for non-multiarch builds. Otherwise we go
through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memcmp-avx2-movsb.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to include
it as we will always use one of the ISA level 4
implementations (memcmp-evex-movbe.S).
3. Add new multiarch/rtld-{w}memcmp{eq}.S that just include the
non-multiarch {w}memcmp{eq}.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Wed, 29 Jun 2022 23:07:06 +0000 (16:07 -0700)]
x86: Add support for building {w}memset{_chk} with explicit ISA level
1. Refactor files so that all implementations are in the multiarch
directory
- Moved the implementation portion of memset sse2 from memset.S to
multiarch/memset-sse2.S
- The non-multiarch file now only includes one of the
implementations in the multiarch directory based on the compiled
ISA level (only used for non-multiarch builds. Otherwise we go
through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memset-avx2-unaligned-erms.S which is ISA level 3 will only
build if compiled ISA level <= 3. Otherwise there is no reason
to include it as we will always use one of the ISA level 4
implementations (memset-evex-unaligned-erms.S).
3. Add new multiarch/rtld-memset.S that just include the
non-multiarch memset.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Tue, 5 Jul 2022 19:41:07 +0000 (12:41 -0700)]
x86: Add support for building {w}memmove{_chk} with explicit ISA level
1. Refactor files so that all implementations are in the multiarch
directory
- Moved the implementation portion of memmove sse2 from memmove.S
to multiarch/memmove-sse2.S
- The non-multiarch file now only includes one of the
implementations in the multiarch directory based on the compiled
ISA level (only used for non-multiarch builds. Otherwise we go
through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memmove-avx2-unaligned-erms.S which is ISA level 3 will only
build if compiled ISA level <= 3. Otherwise there is no reason
to include it as we will always use one of the ISA level 4
implementations (memmove-evex-unaligned-erms.S).
3. Add new multiarch/rtld-memmove.S that just include the
non-multiarch memmove.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
isa raising memmove
Noah Goldstein [Mon, 4 Jul 2022 04:28:07 +0000 (21:28 -0700)]
x86: Add support for building str{c|p}{brk|spn} with explicit ISA level
The changes for these functions are different than the others because
the best implementation (sse4_2) requires the generic
implementation as a fallback to be built as well.
Changes are:
1. Add non-multiarch functions for str{c|p}{brk|spn}.c to statically
select the best implementation based on the configured ISA build
level.
2. Add stubs for str{c|p}{brk|spn}-generic and varshift.c to in the
sysdeps/x86_64 directory so that the the sse4 implementation will
have all of its dependencies for the non-multiarch / rtld build
when ISA level >= 2.
3. Add new multiarch/rtld-strcspn.c that just include the
non-multiarch strcspn.c which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Mon, 4 Jul 2022 04:28:06 +0000 (21:28 -0700)]
x86: Add comment explaining no Slow_SSE4_2 check in ifunc-sse4_2
Just for clarities sake and so that if a future implementation is
added we remember to add the check.
Adhemerval Zanella [Tue, 7 Jun 2022 16:09:40 +0000 (13:09 -0300)]
Replace __libc_multiple_threads with __libc_single_threaded
And also fixes the SINGLE_THREAD_P macro for SINGLE_THREAD_BY_GLOBAL,
since header inclusion single-thread.h is in the wrong order, the define
needs to come before including sysdeps/unix/sysdep.h. The macro
is now moved to a per-arch single-threade.h header.
The SINGLE_THREAD_P is used on some more places.
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
Adhemerval Zanella [Fri, 24 Jun 2022 19:59:19 +0000 (16:59 -0300)]
linux: Add mount_setattr
It was added on Linux 5.12 (
2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Fri, 24 Jun 2022 19:59:18 +0000 (16:59 -0300)]
linux: Add tst-mount to check for Linux new mount API
The new mount API was added on Linux 5.2 with six new syscalls:
fsopen, fsconfig, fsmount, move_mount, fspick, and open_tree.
The new test verifies minimal functionality along with error paths
for specific arguments and their corner cases.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Fri, 24 Jun 2022 19:59:17 +0000 (16:59 -0300)]
linux: Add open_tree
It was added on Linux 5.2 (
a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Fri, 24 Jun 2022 19:59:16 +0000 (16:59 -0300)]
linux: Add fspick
It was added on Linux 5.2 (
cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Fri, 24 Jun 2022 19:59:15 +0000 (16:59 -0300)]
linux: Add fsconfig
It was added on Linux 5.2 (
ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tejas Belagod [Tue, 5 Jul 2022 10:35:24 +0000 (11:35 +0100)]
AArch64: Reset HWCAP2_AFP bits in FPCR for default fenv
The AFP feature (Alternate floating-point behavior) was added in armv8.7 and
introduced new FPCR bits.
Currently, HWCAP2_AFP bits (bit 0, 1, 2) in FPCR are preserved when fenv is
set to default environment. This is a deviation from standard behaviour.
Clear these bits when setting the fenv to default.
There is no libc API to modify the new FPCR bits. Restoring those bits matters
if the user changed them directly.
Florian Weimer [Tue, 5 Jul 2022 12:40:38 +0000 (14:40 +0200)]
elf: Fix direction of NODELETE log messages during symbol lookup
NODELETE status is propagated from the referencing object to the
referenced object, not the other way round. The code is correct, only
the log message has the wrong direction.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Tue, 5 Jul 2022 09:04:45 +0000 (11:04 +0200)]
malloc: Simplify checked_request2size interface
In-band signaling avoids an uninitialized variable warning when
building with -Og and GCC 12.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Florian Weimer [Tue, 5 Jul 2022 09:04:45 +0000 (11:04 +0200)]
stdlib: Simplify buffer management in canonicalize
Move the buffer management from realpath_stk to __realpath. This
allows returning directly after allocation errors.
Always make a copy of the result buffer using strdup even if it is
already heap-allocated. (Heap-allocated buffers are somewhat rare.)
This avoids GCC warnings at certain optimization levels.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Florian Weimer [Tue, 5 Jul 2022 08:30:20 +0000 (10:30 +0200)]
localedef: Support building for older C standards
Fixes commit
b15538d77c6a7893c8bb42831dcd3a1a12b727d4
("locale: localdef input files are now encoded in UTF-8").
Florian Weimer [Tue, 5 Jul 2022 07:05:47 +0000 (09:05 +0200)]
de_DE: Convert to UTF-8
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Tue, 5 Jul 2022 07:05:45 +0000 (09:05 +0200)]
locale: localdef input files are now encoded in UTF-8
Previously, they were assumed to be in ISO-8859-1, and that the output
charset overlapped with ISO-8859-1 for the characters actually used.
However, this did not work as intended on many architectures even for
an ISO-8859-1 output encoding because of the char signedness bug in
lr_getc. Therefore, this commit switches to UTF-8 without making
provisions for backwards compatibility.
The following Elisp code can be used to convert locale definition files
to UTF-8:
(defun glibc/convert-localedef (from to)
(interactive "r")
(save-excursion
(save-restriction
(narrow-to-region from to)
(goto-char (point-min))
(save-match-data
(while (re-search-forward "<U\\([0-9a-fA-F]+\\)>" nil t)
(let* ((codepoint (string-to-number (match-string 1) 16))
(converted
(cond
((memq codepoint '(?/ ?\ ?< ?>))
(string ?/ codepoint))
((= codepoint ?\") "<U0022>")
(t (string codepoint)))))
(replace-match converted t)))))))
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Tue, 5 Jul 2022 07:05:22 +0000 (09:05 +0200)]
locale: Introduce translate_unicode_codepoint into linereader.c
This will permit reusing the Unicode character processing for
different character encodings, not just the current <U...> encoding.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Tue, 5 Jul 2022 07:05:22 +0000 (09:05 +0200)]
locale: Fix signed char bug in lr_getc
The array lr->buf contains characters, which can be signed. A 0xff
byte in the input could be incorrectly reported as EOF. More
importantly, get_string in linereader.c converts a signed input byte
to a Unicode code point using ADDWC ((uint32_t) ch), under the
assumption that this decodes the ISO-8859-1 input encoding. If char
is signed, this does not give the correct result. This means that
ISO-8859-1 input files for localedef are not actually supported,
contrary to the comment in get_string. This is a happy accident because
we can therefore change the file encoding to UTF-8 without impacting
backwards compatibility.
While at it, remove the \32 check for MS-DOS end-of-file character (^Z).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Tue, 5 Jul 2022 07:05:22 +0000 (09:05 +0200)]
locale: Turn ADDC and ADDS into functions in linereader.c
And introduce struct lr_buffer. The functions addc and adds can
be called from functions, enabling subsequent refactoring.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Fangrui Song [Tue, 5 Jul 2022 04:15:51 +0000 (21:15 -0700)]
libc-symbols.h: remove unused macros
Beside weak_hidden_alias/declare_symbol_alias/hidden_data_ver, many
*_hidden_* macros are removed. If there is a rare need to use one, one
may write something like `#if IS_IN (libm)\nhidden_def (...)\n#endif`
instead.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Adhemerval Zanella [Mon, 4 Jul 2022 13:41:58 +0000 (10:41 -0300)]
Fix hurd namespace issues for internal signal functions
It was introduced by "Refactor internal-signals.h
(
a1bdd81664aa681364d)". Use the internal symbols instead.
Checked with a build for i686-gnu.
Guilherme Janczak [Wed, 22 Jun 2022 14:42:39 +0000 (14:42 +0000)]
argp: Remove old includes in !_LIBC case
The headers mempcpy.h, strcase.h, strchrnul.h, and strndup.h are
included if not building argp for glibc. Commit
c5af724c0b214a517f8558887f7a70efcfa2c813 added them in 2003 for gnulib,
but gnulib's current master patches them out:
https://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob;f=lib/argp-namefrob.h;h=
9c82ac79c215540f986c3e04398edba3ba1b7234;hb=HEAD
Joseph Myers [Mon, 4 Jul 2022 13:15:58 +0000 (13:15 +0000)]
Use GCC 12 branch in build-many-glibcs.py
This patch makes build-many-glibcs.py use GCC 12 branch by default.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
Adhemerval Zanella [Thu, 21 Apr 2022 12:41:59 +0000 (09:41 -0300)]
Refactor internal-signals.h
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures. On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).
A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t. The
internal-signals.h is also refactored to remove unused functions
Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Kito Cheng [Tue, 28 Jun 2022 13:52:19 +0000 (21:52 +0800)]
riscv: Use memcpy to handle unaligned access when fixing R_RISCV_RELATIVE
Although RISC-V Linux will enable the unaligned memory access handler by
default, that is quite expensive in general, using memcpy will be much cheaper
- just break down that into several load/store byte instructions.
ARM and MIPS has similar issue:
ARM: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51456
MIPS: https://gcc.gnu.org/legacy-ml/gcc-help/2005-07/msg00325.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Tejas Belagod [Mon, 27 Jun 2022 18:00:50 +0000 (18:00 +0000)]
AArch64: Add asymmetric faulting mode for tag violations in mem.tagging tunable
The new asymmetric mode is available when HWCAP2_MTE3 is set (support is
available), bit2 is set in the tunable (user request per application),
and the system is configured such that the asymmetric mode is preferred over
sync or async (per-cpu system-wide setting).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Adhemerval Zanella [Thu, 30 Jun 2022 12:08:31 +0000 (09:08 -0300)]
linux: Fix mq_timereceive check for 32 bit fallback code (BZ 29304)
On success, mq_receive() and mq_timedreceive() return the number of
bytes in the received message, so it requires to check if the value
is larger than 0.
Checked on i686-linux-gnu.
Noah Goldstein [Thu, 30 Jun 2022 01:56:18 +0000 (18:56 -0700)]
x86: Add missing IS_IN (libc) check to strncmp-sse4_2.S
Was missing to for the multiarch build rtld-strncmp-sse4_2.os was
being built and exporting symbols:
build/glibc/string/rtld-strncmp-sse4_2.os:
0000000000000000 T __strncmp_sse42
Introduced in:
commit
11ffcacb64a939c10cfc713746b8ec88837f5c4a
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Jun 21 12:10:50 2017 -0700
x86-64: Implement strcmp family IFUNC selectors in C
Noah Goldstein [Thu, 30 Jun 2022 01:56:17 +0000 (18:56 -0700)]
x86: Add missing IS_IN (libc) check to strcspn-sse4.c
Was missing to for the multiarch build rtld-strcspn-sse4.os was
being built and exporting symbols:
build/glibc/string/rtld-strcspn-sse4.os:
U ___m128i_shift_right
U __strcspn_generic
0000000000000000 T __strcspn_sse42
U strlen
build/glibc/string/rtld-varshift.os:
0000000000000000 R ___m128i_shift_right
Introduced in:
commit
06e51c8f3de38761f8855700841bc49cf495c8c0
Author: H.J. Lu <hongjiu.lu@intel.com>
Date: Fri Jul 3 02:48:56 2009 -0700
Add SSE4.2 support for strcspn, strpbrk, and strspn on x86-64.
Noah Goldstein [Thu, 30 Jun 2022 01:56:16 +0000 (18:56 -0700)]
x86: Add missing IS_IN (libc) check to memmove-ssse3.S
Was missing to for the multiarch build rtld-memmove-ssse3.os was
being built and exporting symbols:
>$ nm string/rtld-memmove-ssse3.os
U __GI___chk_fail
0000000000000020 T __memcpy_chk_ssse3
0000000000000040 T __memcpy_ssse3
0000000000000020 T __memmove_chk_ssse3
0000000000000040 T __memmove_ssse3
0000000000000000 T __mempcpy_chk_ssse3
0000000000000010 T __mempcpy_ssse3
U __x86_shared_cache_size_half
Introduced after 2.35 in:
commit
26b2478322db94edc9e0e8f577b2f71d291e5acb
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Thu Apr 14 11:47:40 2022 -0500
x86: Reduce code size of mem{move|pcpy|cpy}-ssse3
H.J. Lu [Wed, 29 Jun 2022 20:42:06 +0000 (13:42 -0700)]
x86-64: Properly indent X86_IFUNC_IMPL_ADD_VN arguments
Properly indent X86_IFUNC_IMPL_ADD_VN arguments for memchr, rawmemchr
and wmemchr.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
Noah Goldstein [Tue, 28 Jun 2022 15:26:26 +0000 (08:26 -0700)]
x86-64: Small improvements to dl-trampoline.S
1. Remove sse2 instructions when using the avx512 or avx version.
2. Fixup some format nits in how the address offsets where aligned.
3. Use more space efficient instructions in the conditional AVX
restoral.
- vpcmpeqq -> vpcmpeqb
- cmp imm32, r; jz -> inc r; jz
4. Use `rep movsb` instead of `rep movsq`. The former is guranteed to
be fast with the ERMS flags, the latter is not. The latter also
wastes an instruction in size setup.
Noah Goldstein [Wed, 29 Jun 2022 23:07:15 +0000 (16:07 -0700)]
x86: Move mem{p}{mov|cpy}_{chk_}erms to its own file
The primary memmove_{impl}_unaligned_erms implementations don't
interact with this function. Putting them in same file both
wastes space and unnecessarily bloats a hot code section.
Noah Goldstein [Wed, 29 Jun 2022 23:07:05 +0000 (16:07 -0700)]
x86: Move and slightly improve memset_erms
Implementation wise:
1. Remove the VZEROUPPER as memset_{impl}_unaligned_erms does not
use the L(stosb) label that was previously defined.
2. Don't give the hotpath (fallthrough) to zero size.
Code positioning wise:
Move memset_{chk}_erms to its own file. Leaving it in between the
memset_{impl}_unaligned both adds unnecessary complexity to the
file and wastes space in a relatively hot cache section.
Noah Goldstein [Wed, 29 Jun 2022 23:07:04 +0000 (16:07 -0700)]
x86: Add definition for __wmemset_chk AVX2 RTM in ifunc impl list
This was simply missing and meant we weren't testing it properly.
Arjun Shankar [Wed, 29 Jun 2022 22:37:34 +0000 (00:37 +0200)]
linux: Remove unnecessary nice.c and signal.c
These files simply include the sysdeps/posix implementations which would
be used even in the absence of the files. They have been unnecessary
since
7b17aeda0c5e when nice and signal were removed from the
syscalls.list file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Adhemerval Zanella [Thu, 21 Apr 2022 12:44:48 +0000 (09:44 -0300)]
nptl: Remove unused members from struct pthread
It removes both pid_ununsed and cpuclock_offset_ununsed, saving about
12 bytes from struct pthread.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Florian Weimer [Wed, 29 Jun 2022 11:50:50 +0000 (13:50 +0200)]
Linux: Forward declaration of struct iovec for process_madvise
This maintains compatibility between <sys/mman.h> and <linux/uio.h>.
Before that, the addition of process_madvise made those two header
files incompatible. This has been observed resulting in a build
failure in LLDB's Process/Linux/NativeRegisterContextLinux_s390x.cpp
source file.
Fixes commit
d19ee3473d68ca0e794f3a8b7677a0983ae1342e
("linux: Add process_madvise").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Noah Goldstein [Tue, 28 Jun 2022 04:07:03 +0000 (21:07 -0700)]
x86: Add more feature definitions to isa-level.h
This commit doesn't change anything in itself. It is just to add
definitions that will be needed by future patches.
Florian Weimer [Tue, 28 Jun 2022 08:40:16 +0000 (10:40 +0200)]
elf: Fix -DNDEBUG warning in _dl_start_args_adjust
This is another blocker for building glibc with the default
-Werror setting and -DNDEBUG.
Yang Yanchao [Fri, 15 Apr 2022 09:25:05 +0000 (17:25 +0800)]
elf: Fix compile error with -Werror and -DNDEBUG
Using -Werror and -DNDEBUG at the same time will trigger the
following compiler error:
cache.c: In function 'save_cache':
cache.c:758:15: error: unused variable 'old_offset' [-Werror=unused-variable]
758 | off64_t old_offset = lseek64 (fd, extension_offset, SEEK_SET);
| ^~~~~~~~~~
-DNDEBUG disables the assertion, making old_offset unused.
Use __attribute__ ((unused)) to disable this warning.
H.J. Lu [Mon, 27 Jun 2022 18:36:28 +0000 (11:36 -0700)]
x86-64: Only define used SSE/AVX/AVX512 run-time resolvers
When glibc is built with x86-64 ISA level v3, SSE run-time resolvers
aren't used. For x86-64 ISA level v4 build, both SSE and AVX resolvers
are unused. Check the minimum x86-64 ISA level to exclude the unused
run-time resolvers.
H.J. Lu [Mon, 27 Jun 2022 19:52:58 +0000 (12:52 -0700)]
x86: Move CPU_FEATURE{S}_{USABLE|ARCH}_P to isa-level.h
Move X86_ISA_CPU_FEATURE_USABLE_P and X86_ISA_CPU_FEATURES_ARCH_P to
where MINIMUM_X86_ISA_LEVEL and XXX_X86_ISA_LEVEL are defined.
Noah Goldstein [Fri, 24 Jun 2022 23:15:42 +0000 (16:15 -0700)]
x86: Fix backwards Prefer_No_VZEROUPPER check in ifunc-evex.h
Add third argument to X86_ISA_CPU_FEATURES_ARCH_P macro so the runtime
CPU_FEATURES_ARCH_P check can be inverted if the
MINIMUM_X86_ISA_LEVEL is not high enough to constantly evaluate
the check.
Use this new macro to correct the backwards check in ifunc-evex.h
Noah Goldstein [Fri, 24 Jun 2022 16:42:13 +0000 (09:42 -0700)]
x86: Rename strstr_sse2 to strstr_generic as it uses string/strstr.c
This is in accordance with other files in the multiarch directory.
Noah Goldstein [Fri, 24 Jun 2022 16:42:14 +0000 (09:42 -0700)]
x86: Remove unused file wmemcmp-sse4
The memcmp-sse4 was removed in:
commit
7cbc03d03091d5664060924789afe46d30a5477e
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Fri Apr 15 12:28:00 2022 -0500
x86: Remove memcmp-sse4.S
so this file does nothing.
Noah Goldstein [Fri, 24 Jun 2022 16:42:15 +0000 (09:42 -0700)]
x86: Put wcs{n}len-sse4.1 in the sse4.1 text section
Previously was missing but the two implementations shouldn't get in
the sse2 (generic) text section.
Noah Goldstein [Fri, 24 Jun 2022 16:42:12 +0000 (09:42 -0700)]
x86: Align entry for memrchr to 64-bytes.
The function was tuned around 64-byte entry alignment and performs
better for all sizes with it.
As well different code boths where explicitly written to touch the
minimum number of cache line i.e sizes <= 32 touch only the entry
cache line.
Fangrui Song [Sun, 26 Jun 2022 22:31:19 +0000 (15:31 -0700)]
Makerules: Remove no-op -Wl,-d when linking libc_pic.os
In GNU ld, -d assigns space to common symbols for -r (i.e. change common
symbols to STB_GLOBAL definitions). This option was added in commit
da2d1bc5adf49352232ad0514e79fbd5dcae08e8 (1998) perhaps because ld at
that time had a bug that common symbols did not override shared object
definitions. -d has been long unneeded and more so since -fno-common
was added to +cflags.
Andreas Schwab [Fri, 24 Jun 2022 19:24:40 +0000 (21:24 +0200)]
m68k: optimize RTLD_START
Adhemerval Zanella [Tue, 7 Jun 2022 14:11:03 +0000 (11:11 -0300)]
misc: Optimize internal usage of __libc_single_threaded
By adding an internal alias to avoid the GOT indirection.
On some architecture, __libc_single_thread may be accessed through
copy relocations and thus it requires to update also the copies
default copy.
This is done by adding a new internal macro,
libc_hidden_data_{proto,def}, which has an addition argument that
specifies the alias name (instead of default __GI_ one).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
Adhemerval Zanella [Mon, 31 Jan 2022 13:04:57 +0000 (10:04 -0300)]
linux: Add move_mount
It was added on Linux 5.2 (
2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Mon, 31 Jan 2022 12:46:24 +0000 (09:46 -0300)]
linux: Add fsmount
It was added on 5.2 (
93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Mon, 31 Jan 2022 12:45:12 +0000 (09:45 -0300)]
linux: Add fsopen
It was added on Linux 5.2 (
24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Fri, 24 Jun 2022 17:38:14 +0000 (19:38 +0200)]
resolv/tst-resolv-noaaaa: Support building for older C standards
This avoids a compilation error:
tst-resolv-noaaaa.c: In function 'response':
tst-resolv-noaaaa.c:74:11: error: a label can only be part of a statement and a declaration is not a statement
char ipv4[4] = {192, 0, 2, i + 1};
^~~~
tst-resolv-noaaaa.c:79:11: error: a label can only be part of a statement and a declaration is not a statement
char *name = xasprintf ("ptr-%d", i);
^~~~
Florian Weimer [Fri, 24 Jun 2022 16:16:41 +0000 (18:16 +0200)]
resolv: Implement no-aaaa stub resolver option
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Fri, 24 Jun 2022 16:16:41 +0000 (18:16 +0200)]
support: Change non-address output format of support_format_dns_packet
It makes sense to include the owner name (LHS) and record type in the
output, so that they can be checked for correctness.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Kito Cheng [Thu, 23 Jun 2022 15:47:04 +0000 (23:47 +0800)]
riscv: Use elf_machine_rela_relative to handle R_RISCV_RELATIVE
Minor clean-up, we need to change this part in following patch, clean this up
to prevent we duplicated the change twice.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Noah Goldstein [Thu, 23 Jun 2022 17:49:19 +0000 (10:49 -0700)]
x86: Remove faulty sanity tests for RTLD build with no multiarch
The sanity tests where meant to ensure that the default implementation
was only being built without multiarch with the exception of the
multiarch/rtld-*.S files.
The code used IS_IN (rtld) to check if the build for was for an
multiarch/rtld-*.S file which is incorrect as IS_IN (rtld) is set for
the non-multiarch build as well.
Noah Goldstein [Wed, 22 Jun 2022 23:34:42 +0000 (16:34 -0700)]
stdlib: Fixup mbstowcs NULL __dst handling. [BZ #29279]
commit
464d189b9622932a75302290625de84931656ec0 (origin/master, origin/HEAD)
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 22 08:24:21 2022 -0700
stdlib: Remove attr_write from mbstows if dst is NULL [BZ: 29265]
Incorrectly called `__mbstowcs_chk` in the NULL __dst case which is
incorrect as in the NULL __dst case we are explicitly skipping
the objsize checks.
As well, remove the `__always_inline` attribute which exists in
`__fortify_function`.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Noah Goldstein [Mon, 20 Jun 2022 20:02:10 +0000 (13:02 -0700)]
x86: Replace all sse instructions with vex equivilent in avx+ files
Most of these don't really matter as there was no dirty upper state
but we should generally avoid stray sse when its not needed.
The one case that really matters is in svml_d_tanh4_core_avx2.S:
blendvps %xmm0, %xmm8, %xmm7
When there was a dirty upper state.
Tested on x86_64-linux
Noah Goldstein [Wed, 22 Jun 2022 23:51:20 +0000 (16:51 -0700)]
x86: Add support for compiling {raw|w}memchr with high ISA level
1. Refactor files so that all implementations for in the multiarch
directory.
- Essentially moved sse2 {raw|w}memchr.S implementation to
multiarch/{raw|w}memchr-sse2.S
- The non-multiarch {raw|w}memchr.S file now only includes one of
the implementations in the multiarch directory based on the
compiled ISA level (only used for non-multiarch builds.
Otherwise we go through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memchr-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to include
it as we will always use one of the ISA level 4
implementations (memchr-evex{-rtm}.S).
3. Add new multiarch/rtld-{raw}memchr.S that just include the
non-multiarch {raw}memchr.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
- Guranteed replacement essentially means that for any ISA level
build there must be a function that the baseline of the ISA
supports. So for {raw|w}memchr.S since there is not ISA level 2
function, the ISA level 2 build still includes the ISA level
1 (sse2) function. Once we reach the ISA level 3 build, however,
{raw|w}memchr-avx2{-rtm}.S will always be sufficient so the ISA
level 1 implementation ({raw|w}memchr-sse2.S) will not be built.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Wed, 22 Jun 2022 23:51:19 +0000 (16:51 -0700)]
x86: Add defines / utilities for making ISA specific x86 builds
1. Factor out some of the ISA level defines in isa-level.c to
standalone header isa-level.h
2. Add new headers with ISA level dependent macros for handling
ifuncs.
Note, this file does not change any code.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Noah Goldstein [Wed, 22 Jun 2022 15:24:21 +0000 (08:24 -0700)]
stdlib: Remove attr_write from mbstows if dst is NULL [BZ: 29265]
mbstows is defined if dst is NULL and is defined to special cased if
dst is NULL so the fortify objsize check if incorrect in that case.
Tested on x86-64 linux.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Noah Goldstein [Wed, 22 Jun 2022 17:53:33 +0000 (10:53 -0700)]
stdlib: Remove trailing whitespace from Makefile
This causes precommit tests to fail when pushing commits that modify
this file.