Yang Wei [Mon, 8 Jul 2019 14:57:39 +0000 (22:57 +0800)]
nfc: fix potential illegal memory access
[ Upstream commit
dd006fc434e107ef90f7de0db9907cbc1c521645 ]
The frags_q is not properly initialized, it may result in illegal memory
access when conn_info is NULL.
The "goto free_exit" should be replaced by "goto exit".
Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Hurley [Thu, 27 Jun 2019 13:37:30 +0000 (14:37 +0100)]
net: openvswitch: fix csum updates for MPLS actions
[ Upstream commit
0e3183cd2a64843a95b62f8bd4a83605a4cf0615 ]
Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.
The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.
The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.
However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.
Fix the issue by removing the bit inverts in the csum_partial calculation.
The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.
Fixes:
25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel")
Fixes:
bc7cc5999fd3 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Bianconi [Sun, 14 Jul 2019 21:36:11 +0000 (23:36 +0200)]
net: neigh: fix multiple neigh timer scheduling
[ Upstream commit
071c37983d99da07797294ea78e9da1a6e287144 ]
Neigh timer can be scheduled multiple times from userspace adding
multiple neigh entries and forcing the neigh timer scheduling passing
NTF_USE in the netlink requests.
This will result in a refcount leak and in the following dump stack:
[ 32.465295] NEIGH: BUG, double timer add, state is 8
[ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65
[ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[ 32.465313] Call Trace:
[ 32.465318] dump_stack+0x7c/0xc0
[ 32.465323] __neigh_event_send+0x20c/0x880
[ 32.465326] ? ___neigh_create+0x846/0xfb0
[ 32.465329] ? neigh_lookup+0x2a9/0x410
[ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800
[ 32.465334] neigh_add+0x4f8/0x5e0
[ 32.465337] ? neigh_xmit+0x620/0x620
[ 32.465341] ? find_held_lock+0x85/0xa0
[ 32.465345] rtnetlink_rcv_msg+0x204/0x570
[ 32.465348] ? rtnl_dellink+0x450/0x450
[ 32.465351] ? mark_held_locks+0x90/0x90
[ 32.465354] ? match_held_lock+0x1b/0x230
[ 32.465357] netlink_rcv_skb+0xc4/0x1d0
[ 32.465360] ? rtnl_dellink+0x450/0x450
[ 32.465363] ? netlink_ack+0x420/0x420
[ 32.465366] ? netlink_deliver_tap+0x115/0x560
[ 32.465369] ? __alloc_skb+0xc9/0x2f0
[ 32.465372] netlink_unicast+0x270/0x330
[ 32.465375] ? netlink_attachskb+0x2f0/0x2f0
[ 32.465378] netlink_sendmsg+0x34f/0x5a0
[ 32.465381] ? netlink_unicast+0x330/0x330
[ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20
[ 32.465388] ? netlink_unicast+0x330/0x330
[ 32.465391] sock_sendmsg+0x91/0xa0
[ 32.465394] ___sys_sendmsg+0x407/0x480
[ 32.465397] ? copy_msghdr_from_user+0x200/0x200
[ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40
[ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250
[ 32.465407] ? __wake_up_common_lock+0xcb/0x110
[ 32.465410] ? __wake_up_common+0x230/0x230
[ 32.465413] ? netlink_bind+0x3e1/0x490
[ 32.465416] ? netlink_setsockopt+0x540/0x540
[ 32.465420] ? __fget_light+0x9c/0xf0
[ 32.465423] ? sockfd_lookup_light+0x8c/0xb0
[ 32.465426] __sys_sendmsg+0xa5/0x110
[ 32.465429] ? __ia32_sys_shutdown+0x30/0x30
[ 32.465432] ? __fd_install+0xe1/0x2c0
[ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100
[ 32.465438] ? mark_held_locks+0x24/0x90
[ 32.465441] ? do_syscall_64+0xf/0x270
[ 32.465444] do_syscall_64+0x63/0x270
[ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER'
receiving a netlink request with NTF_USE flag set
Reported-by: Marek Majkowski <marek@cloudflare.com>
Fixes:
0c5c2d308906 ("neigh: Allow for user space users of the neighbour table")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baruch Siach [Thu, 27 Jun 2019 18:17:39 +0000 (21:17 +0300)]
net: dsa: mv88e6xxx: wait after reset deactivation
[ Upstream commit
7b75e49de424ceb53d13e60f35d0a73765626fda ]
Add a 1ms delay after reset deactivation. Otherwise the chip returns
bogus ID value. This is observed with 88E6390 (Peridot) chip.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin Chen [Wed, 17 Jul 2019 21:58:53 +0000 (14:58 -0700)]
net: bcmgenet: use promisc for unsupported filters
[ Upstream commit
35cbef9863640f06107144687bd13151bc2e8ce3 ]
Currently we silently ignore filters if we cannot meet the filter
requirements. This will lead to the MAC dropping packets that are
expected to pass. A better solution would be to set the NIC to promisc
mode when the required filters cannot be met.
Also correct the number of MDF filters supported. It should be 17,
not 16.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matteo Croce [Mon, 1 Jul 2019 17:01:55 +0000 (19:01 +0200)]
ipv4: don't set IPv6 only flags to IPv4 addresses
[ Upstream commit
2e60546368165c2449564d71f6005dda9205b5fb ]
Avoid the situation where an IPV6 only flag is applied to an IPv4 address:
# ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute
# ip -4 addr show dev dummy0
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet 192.0.2.1/24 scope global noprefixroute dummy0
valid_lft forever preferred_lft forever
Or worse, by sending a malicious netlink command:
# ip -4 addr show dev dummy0
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0
valid_lft forever preferred_lft forever
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 27 Jun 2019 08:27:01 +0000 (01:27 -0700)]
igmp: fix memory leak in igmpv3_del_delrec()
[ Upstream commit
e5b1c6c6277d5a283290a8c033c72544746f9b5b ]
im->tomb and/or im->sources might not be NULL, but we
currently overwrite their values blindly.
Using swap() will make sure the following call to kfree_pmc(pmc)
will properly free the psf structures.
Tested with the C repro provided by syzbot, which basically does :
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3
setsockopt(3, SOL_IP, IP_ADD_MEMBERSHIP, "\340\0\0\2\177\0\0\1\0\0\0\0", 12) = 0
ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=0}) = 0
setsockopt(3, SOL_IP, IP_MSFILTER, "\340\0\0\2\177\0\0\1\1\0\0\0\1\0\0\0\377\377\377\377", 20) = 0
ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP}) = 0
exit_group(0) = ?
BUG: memory leak
unreferenced object 0xffff88811450f140 (size 64):
comm "softirq", pid 0, jiffies
4294942448 (age 32.070s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 ................
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000c7bad083>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<
00000000c7bad083>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<
00000000c7bad083>] slab_alloc mm/slab.c:3326 [inline]
[<
00000000c7bad083>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<
000000009acc4151>] kmalloc include/linux/slab.h:547 [inline]
[<
000000009acc4151>] kzalloc include/linux/slab.h:742 [inline]
[<
000000009acc4151>] ip_mc_add1_src net/ipv4/igmp.c:1976 [inline]
[<
000000009acc4151>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2100
[<
000000004ac14566>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2484
[<
0000000052d8f995>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:959
[<
000000004ee1e21f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1248
[<
0000000066cdfe74>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2618
[<
000000009383a786>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3126
[<
00000000d8ac0c94>] __sys_setsockopt+0x98/0x120 net/socket.c:2072
[<
000000001b1e9666>] __do_sys_setsockopt net/socket.c:2083 [inline]
[<
000000001b1e9666>] __se_sys_setsockopt net/socket.c:2080 [inline]
[<
000000001b1e9666>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2080
[<
00000000420d395e>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<
000000007fd83a4b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot+6ca1abd0db68b5173a4f@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Mon, 15 Jul 2019 05:10:17 +0000 (14:10 +0900)]
caif-hsi: fix possible deadlock in cfhsi_exit_module()
[ Upstream commit
fdd258d49e88a9e0b49ef04a506a796f1c768a8e ]
cfhsi_exit_module() calls unregister_netdev() under rtnl_lock().
but unregister_netdev() internally calls rtnl_lock().
So deadlock would occur.
Fixes:
c41254006377 ("caif-hsi: Add rtnl support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guilherme G. Piccoli [Thu, 27 Jun 2019 16:31:33 +0000 (13:31 -0300)]
bnx2x: Prevent ptp_task to be rescheduled indefinitely
[ Upstream commit
3c91f25c2f72ba6001775a5932857c1d2131c531 ]
Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.
By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.
This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.
The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.
Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian King [Mon, 15 Jul 2019 21:41:50 +0000 (16:41 -0500)]
bnx2x: Prevent load reordering in tx completion processing
[ Upstream commit
ea811b795df24644a8eb760b493c43fba4450677 ]
This patch fixes an issue seen on Power systems with bnx2x which results
in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb
pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons
load in bnx2x_tx_int. Adding a read memory barrier resolves the issue.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Fri, 21 Jun 2019 01:19:02 +0000 (21:19 -0400)]
ext4: allow directory holes
commit
4e19d6b65fb4fc42e352ce9883649e049da14743 upstream.
The largedir feature was intended to allow ext4 directories to have
unmapped directory blocks (e.g., directory holes). And so the
released e2fsprogs no longer enforces this for largedir file systems;
however, the corresponding change to the kernel-side code was not made.
This commit fixes this oversight.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Thu, 1 Feb 2018 18:00:50 +0000 (21:00 +0300)]
lib/strscpy: Shut up KASAN false-positives in strscpy()
[ Upstream commit
1a3241ff10d038ecd096d03380327f2a0b5840a6 ]
strscpy() performs the word-at-a-time optimistic reads. So it may may
access the memory past the end of the object, which is perfectly fine
since strscpy() doesn't use that (past-the-end) data and makes sure the
optimistic read won't cross a page boundary.
Use new read_word_at_a_time() to shut up the KASAN.
Note that this potentially could hide some bugs. In example bellow,
stscpy() will copy more than we should (1-3 extra uninitialized bytes):
char dst[8];
char *src;
src = kmalloc(5, GFP_KERNEL);
memset(src, 0xff, 5);
strscpy(dst, src, 8);
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Ryabinin [Thu, 1 Feb 2018 18:00:49 +0000 (21:00 +0300)]
compiler.h: Add read_word_at_a_time() function.
[ Upstream commit
7f1e541fc8d57a143dd5df1d0a1276046e08c083 ]
Sometimes we know that it's safe to do potentially out-of-bounds access
because we know it won't cross a page boundary. Still, KASAN will
report this as a bug.
Add read_word_at_a_time() function which is supposed to be used in such
cases. In read_word_at_a_time() KASAN performs relaxed check - only the
first byte of access is validated.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Ryabinin [Thu, 1 Feb 2018 18:00:48 +0000 (21:00 +0300)]
compiler.h, kasan: Avoid duplicating __read_once_size_nocheck()
[ Upstream commit
bdb5ac801af3d81d36732c2f640d6a1d3df83826 ]
Instead of having two identical __read_once_size_nocheck() functions
with different attributes, consolidate all the difference in new macro
__no_kasan_or_inline and use it. No functional changes.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Junxiao Bi [Wed, 10 Jul 2019 00:17:19 +0000 (17:17 -0700)]
dm bufio: fix deadlock with loop device
commit
bd293d071ffe65e645b4d8104f9d8fe15ea13862 upstream.
When thin-volume is built on loop device, if available memory is low,
the following deadlock can be triggered:
One process P1 allocates memory with GFP_FS flag, direct alloc fails,
memory reclaim invokes memory shrinker in dm_bufio, dm_bufio_shrink_scan()
runs, mutex dm_bufio_client->lock is acquired, then P1 waits for dm_buffer
IO to complete in __try_evict_buffer().
But this IO may never complete if issued to an underlying loop device
that forwards it using direct-IO, which allocates memory using
GFP_KERNEL (see: do_blockdev_direct_IO()). If allocation fails, memory
reclaim will invoke memory shrinker in dm_bufio, dm_bufio_shrink_scan()
will be invoked, and since the mutex is already held by P1 the loop
thread will hang, and IO will never complete. Resulting in ABBA
deadlock.
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lee, Chiasheng [Thu, 20 Jun 2019 07:56:04 +0000 (10:56 +0300)]
usb: Handle USB3 remote wakeup for LPM enabled devices correctly
commit
e244c4699f859cf7149b0781b1894c7996a8a1df upstream.
With Link Power Management (LPM) enabled USB3 links transition to low
power U1/U2 link states from U0 state automatically.
Current hub code detects USB3 remote wakeups by checking if the software
state still shows suspended, but the link has transitioned from suspended
U3 to enabled U0 state.
As it takes some time before the hub thread reads the port link state
after a USB3 wake notification, the link may have transitioned from U0
to U1/U2, and wake is not detected by hub code.
Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup
handling
This patch should be added to stable kernels since 4.13 where LPM was
kept enabled during suspend/resume
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Lee, Chiasheng <chiasheng.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon Janc [Tue, 18 Jun 2019 22:47:47 +0000 (00:47 +0200)]
Bluetooth: Add SMP workaround Microsoft Surface Precision Mouse bug
commit
1d87b88ba26eabd4745e158ecfd87c93a9b51dc2 upstream.
Microsoft Surface Precision Mouse provides bogus identity address when
pairing. It connects with Static Random address but provides Public
Address in SMP Identity Address Information PDU. Address has same
value but type is different. Workaround this by dropping IRK if ID
address discrepancy is detected.
> HCI Event: LE Meta Event (0x3e) plen 19
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 75
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: E0:52:33:93:3B:21 (Static)
Connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
....
> ACL Data RX: Handle 75 flags 0x02 dlen 12
SMP: Identity Address Information (0x09) len 7
Address type: Public (0x00)
Address: E0:52:33:93:3B:21
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Tested-by: Maarten Fonville <maarten.fonville@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199461
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Fri, 21 Jun 2019 16:19:29 +0000 (19:19 +0300)]
intel_th: msu: Fix single mode with disabled IOMMU
commit
918b8646497b5dba6ae82d4a7325f01b258972b9 upstream.
Commit
4e0eaf239fb3 ("intel_th: msu: Fix single mode with IOMMU") switched
the single mode code to use dma mapping pages obtained from the page
allocator, but with IOMMU disabled, that may lead to using SWIOTLB bounce
buffers and without additional sync'ing, produces empty trace buffers.
Fix this by using a DMA32 GFP flag to the page allocation in single mode,
as the device supports full 32-bit DMA addressing.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
4e0eaf239fb3 ("intel_th: msu: Fix single mode with IOMMU")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 4 Jul 2018 09:35:56 +0000 (12:35 +0300)]
eCryptfs: fix a couple type promotion bugs
commit
0bdf8a8245fdea6f075a5fede833a5fcf1b3466c upstream.
ECRYPTFS_SIZE_AND_MARKER_BYTES is type size_t, so if "rc" is negative
that gets type promoted to a high positive value and treated as success.
Fixes:
778aeb42a708 ("eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[tyhicks: Use "if/else if" rather than "if/if"]
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ravi Bangoria [Thu, 13 Jun 2019 03:30:14 +0000 (09:00 +0530)]
powerpc/watchpoint: Restore NV GPRs while returning from exception
commit
f474c28fbcbe42faca4eb415172c07d76adcb819 upstream.
powerpc hardware triggers watchpoint before executing the instruction.
To make trigger-after-execute behavior, kernel emulates the
instruction. If the instruction is 'load something into non-volatile
register', exception handler should restore emulated register state
while returning back, otherwise there will be register state
corruption. eg, adding a watchpoint on a list can corrput the list:
# cat /proc/kallsyms | grep kthread_create_list
c00000000121c8b8 d kthread_create_list
Add watchpoint on kthread_create_list->prev:
# perf record -e mem:0xc00000000121c8c0
Run some workload such that new kthread gets invoked. eg, I just
logged out from console:
list_add corruption. next->prev should be prev (
c000000001214e00), \
but was
c00000000121c8b8. (next=
c00000000121c8b8).
WARNING: CPU: 59 PID: 309 at lib/list_debug.c:25 __list_add_valid+0xb4/0xc0
CPU: 59 PID: 309 Comm: kworker/59:0 Kdump: loaded Not tainted 5.1.0-rc7+ #69
...
NIP __list_add_valid+0xb4/0xc0
LR __list_add_valid+0xb0/0xc0
Call Trace:
__list_add_valid+0xb0/0xc0 (unreliable)
__kthread_create_on_node+0xe0/0x260
kthread_create_on_node+0x34/0x50
create_worker+0xe8/0x260
worker_thread+0x444/0x560
kthread+0x160/0x1a0
ret_from_kernel_thread+0x5c/0x70
List corruption happened because it uses 'load into non-volatile
register' instruction:
Snippet from __kthread_create_on_node:
c000000000136be8: addis r29,r2,-19
c000000000136bec: ld r29,31424(r29)
if (!__list_add_valid(new, prev, next))
c000000000136bf0: mr r3,r30
c000000000136bf4: mr r5,r28
c000000000136bf8: mr r4,r29
c000000000136bfc: bl
c00000000059a2f8 <__list_add_valid+0x8>
Register state from WARN_ON():
GPR00:
c00000000059a3a0 c000007ff23afb50 c000000001344e00 0000000000000075
GPR04:
0000000000000000 0000000000000000 0000001852af8bc1 0000000000000000
GPR08:
0000000000000001 0000000000000007 0000000000000006 00000000000004aa
GPR12:
0000000000000000 c000007ffffeb080 c000000000137038 c000005ff62aaa00
GPR16:
0000000000000000 0000000000000000 c000007fffbe7600 c000007fffbe7370
GPR20:
c000007fffbe7320 c000007fffbe7300 c000000001373a00 0000000000000000
GPR24:
fffffffffffffef7 c00000000012e320 c000007ff23afcb0 c000000000cb8628
GPR28:
c00000000121c8b8 c000000001214e00 c000007fef5b17e8 c000007fef5b17c0
Watchpoint hit at 0xc000000000136bec.
addis r29,r2,-19
=> r29 = 0xc000000001344e00 + (-19 << 16)
=> r29 = 0xc000000001214e00
ld r29,31424(r29)
=> r29 = *(0xc000000001214e00 + 31424)
=> r29 = *(0xc00000000121c8c0)
0xc00000000121c8c0 is where we placed a watchpoint and thus this
instruction was emulated by emulate_step. But because handle_dabr_fault
did not restore emulated register state, r29 still contains stale
value in above register state.
Fixes:
5aae8a5370802 ("powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: stable@vger.kernel.org # 2.6.36+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 17 Jun 2019 21:42:14 +0000 (21:42 +0000)]
powerpc/32s: fix suspend/resume when IBATs 4-7 are used
commit
6ecb78ef56e08d2119d337ae23cb951a640dc52d upstream.
Previously, only IBAT1 and IBAT2 were used to map kernel linear mem.
Since commit
63b2bc619565 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), we may have all 8 BATs used for mapping
kernel text. But the suspend/restore functions only save/restore
BATs 0 to 3, and clears BATs 4 to 7.
Make suspend and restore functions respectively save and reload
the 8 BATs on CPUs having MMU_FTR_USE_HIGH_BATS feature.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Tue, 16 Jul 2019 19:43:11 +0000 (21:43 +0200)]
parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
commit
10835c854685393a921b68f529bf740fa7c9984d upstream.
On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.
This patch prevents such modifications by always setting the two lowest bits to
one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are
modified via ptrace calls in the native and compat ptrace paths.
Link: https://bugs.gentoo.org/481768
Reported-by: Jeroen Roovers <jer@gentoo.org>
Cc: <stable@vger.kernel.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Thu, 4 Jul 2019 01:44:17 +0000 (03:44 +0200)]
parisc: Ensure userspace privilege for ptraced processes in regset functions
commit
34c32fc603311a72cb558e5e337555434f64c27b upstream.
On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.
This patch prevents such modifications in the regset support functions by
always setting the two lowest bits to one (which relates to privilege level 3
for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls.
Link: https://bugs.gentoo.org/481768
Cc: <stable@vger.kernel.org> # v4.7+
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Meyer [Sat, 29 Jul 2017 15:03:23 +0000 (17:03 +0200)]
um: Fix FP register size for XSTATE/XSAVE
commit
6f602afda7275c24c20ba38b5b6cd4ed08561fff upstream.
Hard code max size. Taken from
https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=gdb/common/x86-xstate.h
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Thu, 25 May 2017 18:36:26 +0000 (11:36 -0700)]
um: Allow building and running on older hosts
commit
0a987645672ebde7844a9c0732a5a25f3d4bb6c6 upstream.
Commit
a78ff1112263 ("um: add extended processor state save/restore
support") and
b6024b21fec8 ("um: extend fpstate to _xstate to support
YMM registers") forced the use of the x86 FP _xstate and
PTRACE_GETREGSET/SETREGSET. On older hosts, we would neither be able to
build UML nor run it anymore with these two commits applied because we
don't have definitions for struct _xstate nor these two ptrace requests.
We can determine at build time which fp context structure to check
against, just like we can keep using the old i387 fp save/restore if
PTRACE_GETRESET/SETREGSET are not defined.
Fixes:
a78ff1112263 ("um: add extended processor state save/restore support")
Fixes:
b6024b21fec8 ("um: extend fpstate to _xstate to support YMM registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Fri, 31 May 2019 08:13:06 +0000 (10:13 +0200)]
crypto: caam - limit output IV to CBC to work around CTR mode DMA issue
commit
ed527b13d800dd515a9e6c582f0a73eca65b2e1b upstream.
The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.
This may result in errors like
alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
alg: aead: Failed to load transform for gcm(aes): -2
on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.
Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.
Fixes:
854b06f76879 ("crypto: caam - properly set IV after {en,de}crypt")
Cc: Horia Geanta <horia.geanta@nxp.com>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[ Horia: backported to 4.9 ]
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Fri, 21 Jun 2019 23:45:23 +0000 (23:45 +0000)]
PCI: hv: Fix a use-after-free bug in hv_eject_device_work()
commit
4df591b20b80cb77920953812d894db259d85bd7 upstream.
Fix a use-after-free in hv_eject_device_work().
Fixes:
05f151a73ec2 ("PCI: hv: Fix a memory leak in hv_eject_device_work()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 10 Nov 2016 07:19:52 +0000 (07:19 +0000)]
PCI: hv: Delete the device earlier from hbus->children for hot-remove
commit
e74d2ebdda33b3bdd1826b5b92e9aa45bdf92bb3 upstream.
After we send a PCI_EJECTION_COMPLETE message to the host, the host will
immediately send us a PCI_BUS_RELATIONS message with
relations->device_count == 0, so pci_devices_present_work(), running on
another thread, can find the being-ejected device, mark the
hpdev->reported_missing to true, and run list_move_tail()/list_del() for
the device -- this races hv_eject_device_work() -> list_del().
Move the list_del() in hv_eject_device_work() to an earlier place, i.e.,
before we send PCI_EJECTION_COMPLETE, so later the
pci_devices_present_work() can't see the device.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jake Oshins <jakeo@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hook, Gary [Thu, 27 Jun 2019 16:16:23 +0000 (16:16 +0000)]
crypto: ccp - Validate the the error value used to index error messages
commit
52393d617af7b554f03531e6756facf2ea687d2e upstream.
The error code read from the queue status register is only 6 bits wide,
but we need to verify its value is within range before indexing the error
messages.
Fixes:
81422badb3907 ("crypto: ccp - Make syslog errors human-readable")
Cc: <stable@vger.kernel.org>
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Longerbeam [Wed, 22 May 2019 01:03:13 +0000 (18:03 -0700)]
gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM
commit
3d1f62c686acdedf5ed9642b763f3808d6a47d1e upstream.
The saturation bit was being set at bit 9 in the second 32-bit word
of the TPMEM CSC. This isn't correct, the saturation bit is bit 42,
which is bit 10 of the second word.
Fixes:
1aa8ea0d2bd5d ("gpu: ipu-v3: Add Image Converter unit")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Harkes [Tue, 16 Jul 2019 23:28:04 +0000 (16:28 -0700)]
coda: pass the host file in vma->vm_file on mmap
commit
7fa0a1da3dadfd9216df7745a1331fdaa0940d1c upstream.
Patch series "Coda updates".
The following patch series is a collection of various fixes for Coda,
most of which were collected from linux-fsdevel or linux-kernel but
which have as yet not found their way upstream.
This patch (of 22):
Various file systems expect that vma->vm_file points at their own file
handle, several use file_inode(vma->vm_file) to get at their inode or
use vma->vm_file->private_data. However the way Coda wrapped mmap on a
host file broke this assumption, vm_file was still pointing at the Coda
file and the host file systems would scribble over Coda's inode and
private file data.
This patch fixes the incorrect expectation and wraps vm_ops->open and
vm_ops->close to allow Coda to track when the vm_area_struct is
destroyed so we still release the reference on the Coda file handle at
the right time.
[This patch differs from the original upstream patch because older stable
kernels do not have the call_mmap vfs helper so we call f_ops->mmap
directly.]
Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Efremov [Fri, 12 Jul 2019 18:55:23 +0000 (21:55 +0300)]
floppy: fix out-of-bounds read in copy_buffer
[ Upstream commit
da99466ac243f15fbba65bd261bfc75ffa1532b6 ]
This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.
The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function. It is
possible to overflow the max_sector. Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.
An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.
The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Efremov [Fri, 12 Jul 2019 18:55:22 +0000 (21:55 +0300)]
floppy: fix invalid pointer dereference in drive_name
[ Upstream commit
9b04609b784027968348796a18f601aed9db3789 ]
This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.
The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function. Thus, the field
should be checked the same way as the autodetect field.
To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should
be used to call the drive_name. A floppy disk is not required to be
inserted.
CAP_SYS_ADMIN is required to call FDSETDRVPRM.
The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Efremov [Fri, 12 Jul 2019 18:55:21 +0000 (21:55 +0300)]
floppy: fix out-of-bounds read in next_valid_format
[ Upstream commit
5635f897ed83fd539df78e98ba69ee91592f9bb8 ]
This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.
The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.
To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to
be inserted.
CAP_SYS_ADMIN is required to call FDSETDRVPRM.
The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Efremov [Fri, 12 Jul 2019 18:55:20 +0000 (21:55 +0300)]
floppy: fix div-by-zero in setup_format_params
[ Upstream commit
f3554aeb991214cbfafd17d55e2bfddb50282e32 ]
This fixes a divide by zero error in the setup_format_params function of
the floppy driver.
Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero. Next, the floppy format operation should be called.
A floppy disk is not required to be inserted. An unprivileged user
could trigger the bug if the device is accessible.
The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function. The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.
The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 27 Jun 2017 19:47:56 +0000 (15:47 -0400)]
take floppy compat ioctls to sodding floppy.c
[ Upstream commit
229b53c9bf4e1132a4aa6feb9632a7a1f1d08c5c ]
all other drivers recognizing those ioctls are very much *not*
biarch.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Thu, 18 Jul 2019 22:58:36 +0000 (15:58 -0700)]
libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields
commit
7e3e888dfc138089f4c15a81b418e88f0978f744 upstream.
At namespace creation time there is the potential for the "expected to
be zero" fields of a 'pfn' info-block to be filled with indeterminate
data. While the kernel buffer is zeroed on allocation it is immediately
overwritten by nd_pfn_validate() filling it with the current contents of
the on-media info-block location. For fields like, 'flags' and the
'padding' it potentially means that future implementations can not rely on
those fields being zero.
In preparation to stop using the 'start_pad' and 'end_trunc' fields for
section alignment, arrange for fields that are not explicitly
initialized to be guaranteed zero. Bump the minor version to indicate
it is safe to assume the 'padding' and 'flags' are zero. Otherwise,
this corruption is expected to benign since all other critical fields
are explicitly initialized.
Note The cc: stable is about spreading this new policy to as many
kernels as possible not fixing an issue in those kernels. It is not
until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to
section alignment" where this improper initialization becomes a problem.
So if someone decides to backport "libnvdimm/pfn: Stop padding pmem
namespaces to section alignment" (which is not tagged for stable), make
sure this pre-requisite is flagged.
Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes:
32ab0a3f5170 ("libnvdimm, pmem: 'struct page' for pmem")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64]
Cc: <stable@vger.kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Wed, 19 Jun 2019 12:05:50 +0000 (13:05 +0100)]
Btrfs: add missing inode version, ctime and mtime updates when punching hole
commit
179006688a7e888cbff39577189f2e034786d06a upstream.
If the range for which we are punching a hole covers only part of a page,
we end up updating the inode item but we skip the update of the inode's
iversion, mtime and ctime. Fix that by ensuring we update those properties
of the inode.
A patch for fstests test case generic/059 that tests this as been sent
along with this fix.
Fixes:
2aaa66558172b0 ("Btrfs: add hole punching")
Fixes:
e8c1c76e804b18 ("Btrfs: add missing inode update when punching hole")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 12 Jun 2019 10:57:39 +0000 (13:57 +0300)]
PCI: Do not poll for PME if the device is in D3cold
commit
000dd5316e1c756a1c028f22e01d06a38249dd4d upstream.
PME polling does not take into account that a device that is directly
connected to the host bridge may go into D3cold as well. This leads to a
situation where the PME poll thread reads from a config space of a
device that is in D3cold and gets incorrect information because the
config space is not accessible.
Here is an example from Intel Ice Lake system where two PCIe root ports
are in D3cold (I've instrumented the kernel to log the PMCSR register
contents):
[ 62.971442] pcieport 0000:00:07.1: Check PME status, PMCSR=0xffff
[ 62.971504] pcieport 0000:00:07.0: Check PME status, PMCSR=0xffff
Since 0xffff is interpreted so that PME is pending, the root ports will
be runtime resumed. This repeats over and over again essentially
blocking all runtime power management.
Prevent this from happening by checking whether the device is in D3cold
before its PME status is read.
Fixes:
71a83bd727cc ("PCI/PM: add runtime PM support to PCIe port")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: 3.6+ <stable@vger.kernel.org> # v3.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Tue, 30 Apr 2019 11:59:42 +0000 (19:59 +0800)]
9p/virtio: Add cleanup path in p9_virtio_init
commit
d4548543fc4ece56c6f04b8586f435fb4fd84c20 upstream.
KASAN report this:
BUG: unable to handle kernel paging request at
ffffffffa0097000
PGD 3870067 P4D 3870067 PUD 3871063 PMD
2326e2067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 5340 Comm: modprobe Not tainted 5.1.0-rc7+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_add_valid+0x10/0x70
Code: c3 48 8b 06 55 48 89 e5 5d 48 39 07 0f 94 c0 0f b6 c0 c3 90 90 90 90 90 90 90 55 48 89 d0 48 8b 52 08 48 89 e5 48 39 f2 75 19 <48> 8b 32 48 39 f0 75 3a
RSP: 0018:
ffffc90000e23c68 EFLAGS:
00010246
RAX:
ffffffffa00ad000 RBX:
ffffffffa009d000 RCX:
0000000000000000
RDX:
ffffffffa0097000 RSI:
ffffffffa0097000 RDI:
ffffffffa009d000
RBP:
ffffc90000e23c68 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffffa0097000
R13:
ffff888231797180 R14:
0000000000000000 R15:
ffffc90000e23e78
FS:
00007fb215285540(0000) GS:
ffff888237a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffa0097000 CR3:
000000022f144000 CR4:
00000000000006f0
Call Trace:
v9fs_register_trans+0x2f/0x60 [9pnet
? 0xffffffffa0087000
p9_virtio_init+0x25/0x1000 [9pnet_virtio
do_one_initcall+0x6c/0x3cc
? kmem_cache_alloc_trace+0x248/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fb214d8e839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01
RSP: 002b:
00007ffc96554278 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
RAX:
ffffffffffffffda RBX:
000055e67eed2aa0 RCX:
00007fb214d8e839
RDX:
0000000000000000 RSI:
000055e67ce95c2e RDI:
0000000000000003
RBP:
000055e67ce95c2e R08:
0000000000000000 R09:
000055e67eed2aa0
R10:
0000000000000003 R11:
0000000000000246 R12:
0000000000000000
R13:
000055e67eeda500 R14:
0000000000040000 R15:
000055e67eed2aa0
Modules linked in: 9pnet_virtio(+) 9pnet gre rfkill vmw_vsock_virtio_transport_common vsock [last unloaded: 9pnet_virtio
CR2:
ffffffffa0097000
---[ end trace
4a52bb13ff07b761
If register_virtio_driver() fails in p9_virtio_init,
we should call v9fs_unregister_trans() to do cleanup.
Link: http://lkml.kernel.org/r/20190430115942.41840-1-yuehaibing@huawei.com
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
b530cc794024 ("9p: add virtio transport")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jordan [Tue, 16 Jul 2019 16:32:53 +0000 (12:32 -0400)]
padata: use smp_mb in padata_reorder to avoid orphaned padata jobs
commit
cf144f81a99d1a3928f90b0936accfd3f45c9a0a upstream.
Testing padata with the tcrypt module on a 5.2 kernel...
# modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
# modprobe tcrypt mode=211 sec=1
...produces this splat:
INFO: task modprobe:10075 blocked for more than 120 seconds.
Not tainted 5.2.0-base+ #16
modprobe D 0 10075 10064 0x80004080
Call Trace:
? __schedule+0x4dd/0x610
? ring_buffer_unlock_commit+0x23/0x100
schedule+0x6c/0x90
schedule_timeout+0x3b/0x320
? trace_buffer_unlock_commit_regs+0x4f/0x1f0
wait_for_common+0x160/0x1a0
? wake_up_q+0x80/0x80
{ crypto_wait_req } # entries in braces added by hand
{ do_one_aead_op }
{ test_aead_jiffies }
test_aead_speed.constprop.17+0x681/0xf30 [tcrypt]
do_test+0x4053/0x6a2b [tcrypt]
? 0xffffffffa00f4000
tcrypt_mod_init+0x50/0x1000 [tcrypt]
...
The second modprobe command never finishes because in padata_reorder,
CPU0's load of reorder_objects is executed before the unlocking store in
spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment:
CPU0 CPU1
padata_reorder padata_do_serial
LOAD reorder_objects // 0
INC reorder_objects // 1
padata_reorder
TRYLOCK pd->lock // failed
UNLOCK pd->lock
CPU0 deletes the timer before returning from padata_reorder and since no
other job is submitted to padata, modprobe waits indefinitely.
Add a pair of full barriers to guarantee proper ordering:
CPU0 CPU1
padata_reorder padata_do_serial
UNLOCK pd->lock
smp_mb()
LOAD reorder_objects
INC reorder_objects
smp_mb__after_atomic()
padata_reorder
TRYLOCK pd->lock
smp_mb__after_atomic is needed so the read part of the trylock operation
comes after the INC, as Andrea points out. Thanks also to Andrea for
help with writing a litmus test.
Fixes:
16295bec6398 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Wed, 26 Jun 2019 18:10:27 +0000 (14:10 -0400)]
drm/nouveau/i2c: Enable i2c pads & busses during preinit
commit
7cb95eeea6706c790571042a06782e378b2561ea upstream.
It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:
commit
342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")
We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.
This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!
So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Marc Meledandri <m.meledandri@gmail.com>
Fixes:
342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radoslaw Burny [Tue, 16 Jul 2019 23:26:51 +0000 (16:26 -0700)]
fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.
commit
5ec27ec735ba0477d48c80561cc5e856f0c5dfaf upstream.
Normally, the inode's i_uid/i_gid are translated relative to s_user_ns,
but this is not a correct behavior for proc. Since sysctl permission
check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more
sense to use these values in u_[ug]id of proc inodes. In other words:
although uid/gid in the inode is not read during test_perm, the inode
logically belongs to the root of the namespace. I have confirmed this
with Eric Biederman at LPC and in this thread:
https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com
Consequences
============
Since the i_[ug]id values of proc nodes are not used for permissions
checks, this change usually makes no functional difference. However, it
causes an issue in a setup where:
* a namespace container is created without root user in container -
hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID
* container creator tries to configure it by writing /proc/sys files,
e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit
Kernel does not allow to open an inode for writing if its i_[ug]id are
invalid, making it impossible to write shmmax and thus - configure the
container.
Using a container with no root mapping is apparently rare, but we do use
this configuration at Google. Also, we use a generic tool to configure
the container limits, and the inability to write any of them causes a
failure.
History
=======
The invalid uids/gids in inodes first appeared due to
81754357770e (fs:
Update i_[ug]id_(read|write) to translate relative to s_user_ns).
However, AFAIK, this did not immediately cause any issues. The
inability to write to these "invalid" inodes was only caused by a later
commit
0bd23d09b874 (vfs: Don't modify inodes with a uid or gid unknown
to the vfs).
Tested: Used a repro program that creates a user namespace without any
mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside.
Before the change, it shows the overflow uid, with the change it's 0.
The overflow uid indicates that the uid in the inode is not correct and
thus it is not possible to open the file for writing.
Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com
Fixes:
0bd23d09b874 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs")
Signed-off-by: Radoslaw Burny <rburny@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: John Sperbeck <jsperbeck@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Hunter [Thu, 20 Jun 2019 08:17:00 +0000 (09:17 +0100)]
arm64: tegra: Fix AGIC register range
commit
ba24eee6686f6ed3738602b54d959253316a9541 upstream.
The Tegra AGIC interrupt controller is an ARM GIC400 interrupt
controller. Per the ARM GIC device-tree binding, the first address
region is for the GIC distributor registers and the second address
region is for the GIC CPU interface registers. The address space for
the distributor registers is 4kB, but currently this is incorrectly
defined as 8kB for the Tegra AGIC and overlaps with the CPU interface
registers. Correct the address space for the distributor to be 4kB.
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes:
bcdbde433542 ("arm64: tegra: Add AGIC node for Tegra210")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like Xu [Thu, 18 Jul 2019 05:35:14 +0000 (13:35 +0800)]
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
commit
6fc3977ccc5d3c22e851f2dce2d3ce2a0a843842 upstream.
If a perf_event creation fails due to any reason of the host perf
subsystem, it has no chance to log the corresponding event for guest
which may cause abnormal sampling data in guest result. In debug mode,
this message helps to understand the state of vPMC and we may not
limit the number of occurrences but not in a spamming style.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ezequiel Garcia [Thu, 2 May 2019 22:00:43 +0000 (18:00 -0400)]
media: coda: Remove unbalanced and unneeded mutex unlock
commit
766b9b168f6c75c350dd87c3e0bc6a9b322f0013 upstream.
The mutex unlock in the threaded interrupt handler is not paired
with any mutex lock. Remove it.
This bug has been here for a really long time, so it applies
to any stable repo.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Wed, 19 Jun 2019 09:21:33 +0000 (05:21 -0400)]
media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
commit
07d89227a983df957a6a7c56f7c040cde9ac571f upstream.
cfg->type can be overridden by v4l2_ctrl_fill() and the new value is
stored in the local type var. Fix the tests to use this local var.
Fixes:
0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
[hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Tue, 16 Jul 2019 07:21:34 +0000 (15:21 +0800)]
ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
commit
4b4e0e32e4b09274dbc9d173016c1a026f44608c upstream.
Without this patch, the headset-mic and headphone-mic don't work.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 15 Jul 2019 20:50:27 +0000 (22:50 +0200)]
ALSA: seq: Break too long mutex context in the write loop
commit
ede34f397ddb063b145b9e7d79c6026f819ded13 upstream.
The fix for the racy writes and ioctls to sequencer widened the
application of client->ioctl_mutex to the whole write loop. Although
it does unlock/relock for the lengthy operation like the event dup,
the loop keeps the ioctl_mutex for the whole time in other
situations. This may take quite long time if the user-space would
give a huge buffer, and this is a likely cause of some weird behavior
spotted by syzcaller fuzzer.
This patch puts a simple workaround, just adding a mutex break in the
loop when a large number of events have been processed. This
shouldn't hit any performance drop because the threshold is set high
enough for usual operations.
Fixes:
7bd800915677 ("ALSA: seq: More protection for concurrent write and ioctl races")
Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com
Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 24 Jun 2019 07:20:14 +0000 (07:20 +0000)]
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
commit
aeb87246537a83c2aff482f3f34a2e0991e02cbc upstream.
All mapping iterator logic is based on the assumption that sg->offset
is always lower than PAGE_SIZE.
But there are situations where sg->offset is such that the SG item
is on the second page. In that case sg_copy_to_buffer() fails
properly copying the data into the buffer. One of the reason is
that the data will be outside the kmapped area used to access that
data.
This patch fixes the issue by adjusting the mapping iterator
offset and pgoffset fields such that offset is always lower than
PAGE_SIZE.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes:
4225fc8555a9 ("lib/scatterlist: use page iterator in the mapping iterator")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Thu, 27 Jun 2019 10:41:45 +0000 (06:41 -0400)]
NFSv4: Handle the special Linux file open access mode
commit
44942b4e457beda00981f616402a1a791e8c616e upstream.
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes:
ce4ef7c0a8a05 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eiichi Tsukata [Tue, 25 Jun 2019 01:29:10 +0000 (10:29 +0900)]
tracing/snapshot: Resize spare buffer if size changed
commit
46cc0b44428d0f0e81f11ea98217fc0edfbeab07 upstream.
Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.
For example:
# cat buffer_size_kb
7 (expanded: 1408)
# echo 1 > events/enable
# grep bytes per_cpu/cpu0/stats
bytes: 1441020
# echo 1 > snapshot // current:1408, spare:1408
# echo 123 > buffer_size_kb // current:123, spare:1408
# echo 1 > snapshot // current:1408, spare:123
# grep bytes per_cpu/cpu0/stats
bytes: 1443700
# cat buffer_size_kb
123 // != current:1408
And also, a similar per-cpu case hits the following WARNING:
Reproducer:
# echo 1 > per_cpu/cpu0/snapshot
# echo 123 > buffer_size_kb
# echo 1 > per_cpu/cpu0/snapshot
WARNING:
WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
Modules linked in:
CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
RSP: 0018:
ffff888063e4fca0 EFLAGS:
00010093
RAX:
ffff888066214380 RBX:
ffffffff99850fe0 RCX:
ffffffff964298a8
RDX:
0000000000000000 RSI:
00000000fffffff5 RDI:
0000000000000005
RBP:
1ffff1100c7c9f96 R08:
ffff888066214380 R09:
ffffed100c7c9f9b
R10:
ffffed100c7c9f9a R11:
0000000000000003 R12:
0000000000000000
R13:
00000000ffffffea R14:
ffff888066214380 R15:
ffffffff99851060
FS:
00007f9f8173c700(0000) GS:
ffff88806d000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000714dc0 CR3:
0000000066fa6000 CR4:
00000000000006f0
Call Trace:
? trace_array_printk_buf+0x140/0x140
? __mutex_lock_slowpath+0x10/0x10
tracing_snapshot_write+0x4c8/0x7f0
? trace_printk_init_buffers+0x60/0x60
? selinux_file_permission+0x3b/0x540
? tracer_preempt_off+0x38/0x506
? trace_printk_init_buffers+0x60/0x60
__vfs_write+0x81/0x100
vfs_write+0x1e1/0x560
ksys_write+0x126/0x250
? __ia32_sys_read+0xb0/0xb0
? do_syscall_64+0x1f/0x390
do_syscall_64+0xc1/0x390
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.
Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com
Cc: stable@vger.kernel.org
Fixes:
ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Tue, 21 May 2019 12:10:38 +0000 (15:10 +0300)]
iwlwifi: pcie: don't service an interrupt that was masked
commit
3b57a10ca14c619707398dc58fe5ece18c95b20b upstream.
Sometimes the register status can include interrupts that
were masked. We can, for example, get the RF-Kill bit set
in the interrupt status register although this interrupt
was masked. Then if we get the ALIVE interrupt (for example)
that was not masked, we need to *not* service the RF-Kill
interrupt.
Fix this in the MSI-X interrupt handler.
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Hunter [Thu, 20 Jun 2019 08:17:01 +0000 (09:17 +0100)]
arm64: tegra: Update Jetson TX1 GPU regulator timings
commit
ece6031ece2dd64d63708cfe1088016cee5b10c0 upstream.
The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which
not sufficient because the enable ramp delay has been measured to be
greater than 1ms. Furthermore, the downstream kernels released by NVIDIA
for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of
160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be
2ms and add a settling delay of 160us.
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes:
5e6b9a89afce ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Sat, 29 Jun 2019 11:44:45 +0000 (13:44 +0200)]
regulator: s2mps11: Fix buck7 and buck8 wrong voltages
commit
16da0eb5ab6ef2dd1d33431199126e63db9997cc upstream.
On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750
mV, not 600 mV. Using wrong minimal value caused shifting of these
regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was
reported as 1.2 V).
On most of the boards these regulators are left in default state so this
was only affecting reported voltage. However if any driver wanted to
change them, then effectively it would set voltage 150 mV higher than
intended.
Cc: <stable@vger.kernel.org>
Fixes:
cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grant Hernandez [Sat, 13 Jul 2019 08:00:12 +0000 (01:00 -0700)]
Input: gtco - bounds check collection indent level
commit
2a017fd82c5402b3c8df5e3d6e5165d9e6147dc1 upstream.
The GTCO tablet input driver configures itself from an HID report sent
via USB during the initial enumeration process. Some debugging messages
are generated during the parsing. A debugging message indentation
counter is not bounds checked, leading to the ability for a specially
crafted HID report to cause '-' and null bytes be written past the end
of the indentation array. As long as the kernel has CONFIG_DYNAMIC_DEBUG
enabled, this code will not be optimized out. This was discovered
during code review after a previous syzkaller bug was found in this
driver.
Signed-off-by: Grant Hernandez <granthernandez@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen Yang [Mon, 8 Jul 2019 06:19:03 +0000 (14:19 +0800)]
crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe
commit
95566aa75cd6b3b404502c06f66956b5481194b3 upstream.
There is a possible double free issue in ppc4xx_trng_probe():
85: dev->trng_base = of_iomap(trng, 0);
86: of_node_put(trng); ---> released here
87: if (!dev->trng_base)
88: goto err_out;
...
110: ierr_out:
111: of_node_put(trng); ---> double released here
...
This issue was detected by using the Coccinelle software.
We fix it by removing the unnecessary of_node_put().
Fixes:
5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: <stable@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 31 May 2019 18:12:30 +0000 (11:12 -0700)]
crypto: chacha20poly1305 - fix atomic sleep when using async algorithm
commit
7545b6c2087f4ef0287c8c9b7eba6a728c67ff8e upstream.
Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305
operation is being continued from an async completion callback, since
sleeping may not be allowed in that context.
This is basically the same bug that was recently fixed in the xts and
lrw templates. But, it's always been broken in chacha20poly1305 too.
This was found using syzkaller in combination with the updated crypto
self-tests which actually test the MAY_SLEEP flag now.
Reproducer:
python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(
("aead", "rfc7539(cryptd(chacha20-generic),poly1305-generic)"))'
Kernel output:
BUG: sleeping function called from invalid context at include/crypto/algapi.h:426
in_atomic(): 1, irqs_disabled(): 0, pid: 1001, name: kworker/2:2
[...]
CPU: 2 PID: 1001 Comm: kworker/2:2 Not tainted 5.2.0-rc2 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
Workqueue: crypto cryptd_queue_worker
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x4d/0x6a lib/dump_stack.c:113
___might_sleep kernel/sched/core.c:6138 [inline]
___might_sleep.cold.19+0x8e/0x9f kernel/sched/core.c:6095
crypto_yield include/crypto/algapi.h:426 [inline]
crypto_hash_walk_done+0xd6/0x100 crypto/ahash.c:113
shash_ahash_update+0x41/0x60 crypto/shash.c:251
shash_async_update+0xd/0x10 crypto/shash.c:260
crypto_ahash_update include/crypto/hash.h:539 [inline]
poly_setkey+0xf6/0x130 crypto/chacha20poly1305.c:337
poly_init+0x51/0x60 crypto/chacha20poly1305.c:364
async_done_continue crypto/chacha20poly1305.c:78 [inline]
poly_genkey_done+0x15/0x30 crypto/chacha20poly1305.c:369
cryptd_skcipher_complete+0x29/0x70 crypto/cryptd.c:279
cryptd_skcipher_decrypt+0xcd/0x110 crypto/cryptd.c:339
cryptd_queue_worker+0x70/0xa0 crypto/cryptd.c:184
process_one_work+0x1ed/0x420 kernel/workqueue.c:2269
worker_thread+0x3e/0x3a0 kernel/workqueue.c:2415
kthread+0x11f/0x140 kernel/kthread.c:255
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Fixes:
71ebc4d1b27d ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elena Petrova [Tue, 28 May 2019 14:35:06 +0000 (15:35 +0100)]
crypto: arm64/sha2-ce - correct digest for empty data in finup
commit
6bd934de1e393466b319d29c4427598fda096c57 upstream.
The sha256-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: the actual digest, result: initial
value of SHA internal state. The error is in sha256_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha2_ce_transform to make the final round. However, in
sha256_base_do_update, the block function will not be called when
len == 0.
Fix it by setting finalize to 0 if data is empty.
Fixes:
03802f6a80b3a ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Petrova <lenaptr@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elena Petrova [Tue, 28 May 2019 12:41:52 +0000 (13:41 +0100)]
crypto: arm64/sha1-ce - correct digest for empty data in finup
commit
1d4aaf16defa86d2665ae7db0259d6cb07e2091f upstream.
The sha1-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected:
da39a3ee..., result:
67452301...
(initial value of SHA internal state). The error is in sha1_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha1_ce_transform to make the final round. However, in
sha1_base_do_update, the block function will not be called when
len == 0.
Fix it by setting finalize to 0 if data is empty.
Fixes:
07eb54d306f4 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Petrova <lenaptr@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 30 May 2019 17:50:39 +0000 (10:50 -0700)]
crypto: ghash - fix unaligned memory access in ghash_setkey()
commit
5c6bc4dfa515738149998bb0db2481a4fdead979 upstream.
Changing ghash_mod_init() to be subsys_initcall made it start running
before the alignment fault handler has been installed on ARM. In kernel
builds where the keys in the ghash test vectors happened to be
misaligned in the kernel image, this exposed the longstanding bug that
ghash_setkey() is incorrectly casting the key buffer (which can have any
alignment) to be128 for passing to gf128mul_init_4k_lle().
Fix this by memcpy()ing the key to a temporary buffer.
Don't fix it by setting an alignmask on the algorithm instead because
that would unnecessarily force alignment of the data too.
Fixes:
2cdc6899a88e ("crypto: ghash - Add GHASH digest algorithm for GCM")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finn Thain [Sun, 9 Jun 2019 01:19:11 +0000 (11:19 +1000)]
scsi: mac_scsi: Increase PIO/PDMA transfer length threshold
commit
7398cee4c3e6aea1ba07a6449e5533ecd0b92cdd upstream.
Some targets introduce delays when handshaking the response to certain
commands. For example, a disk may send a 96-byte response to an INQUIRY
command (or a 24-byte response to a MODE SENSE command) too slowly.
Apparently the first 12 or 14 bytes are handshaked okay but then the system
bus error timeout is reached while transferring the next word.
Since the scsi bus phase hasn't changed, the driver then sets the target
borken flag to prevent further PDMA transfers. The driver also logs the
warning, "switching to slow handshake".
Raise the PDMA threshold to 512 bytes so that PIO transfers will be used
for these commands. This default is sufficiently low that PDMA will still
be used for READ and WRITE commands.
The existing threshold (16 bytes) was chosen more or less at random.
However, best performance requires the threshold to be as low as possible.
Those systems that don't need the PIO workaround at all may benefit from
mac_scsi.setup_use_pdma=1
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.14+
Fixes:
3a0f64bfa907 ("mac_scsi: Fix pseudo DMA implementation")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finn Thain [Sun, 9 Jun 2019 01:19:11 +0000 (11:19 +1000)]
scsi: NCR5380: Always re-enable reselection interrupt
commit
57f31326518e98ee4cabf9a04efe00ed57c54147 upstream.
The reselection interrupt gets disabled during selection and must be
re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a
disconnected command may time-out or the target may wedge the bus while
trying to reselect the host. This can happen after a command is aborted.
Fix this by enabling the reselection interrupt in NCR5380_main() after
calls to NCR5380_select() and NCR5380_information_transfer() return.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.9+
Fixes:
8b00c3d5d40d ("ncr5380: Implement new eh_abort_handler")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finn Thain [Thu, 27 Sep 2018 01:17:11 +0000 (11:17 +1000)]
scsi: NCR5380: Reduce goto statements in NCR5380_select()
commit
6a162836997c10bbefb7c7ca772201cc45c0e4a6 upstream.
Replace a 'goto' statement with a simple 'return' where possible. This
improves readability. No functional change.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Wed, 19 Jun 2019 09:00:56 +0000 (11:00 +0200)]
xen: let alloc_xenballooned_pages() fail if not enough memory free
commit
a1078e821b605813b63bf6bca414a85f804d5c66 upstream.
Instead of trying to allocate pages with GFP_USER in
add_ballooned_pages() check the available free memory via
si_mem_available(). GFP_USER is far less limiting memory exhaustion
than the test via si_mem_available().
This will avoid dom0 running out of memory due to excessive foreign
page mappings especially on ARM and on x86 in PVH mode, as those don't
have a pre-ballooned area which can be used for foreign mappings.
As the normal ballooning suffers from the same problem don't balloon
down more than si_mem_available() pages in one iteration. At the same
time limit the default maximum number of retries.
This is part of XSA-300.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Tue, 2 Jul 2019 15:23:42 +0000 (00:23 +0900)]
gtp: fix use-after-free in gtp_newlink()
[ Upstream commit
a2bed90704c68d3763bf24decb1b781a45395de8 ]
Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().
Test commands:
#SHELL 1
while :
do
for i in {1..5}
do
./gtp-link add gtp$i &
done
killall gtp-link
done
#SHELL 2
while :
do
modprobe -rv gtp
done
Splat looks like:
[ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.177722] Read of size 8 at addr
ffff8880d48f2458 by task gtp-link/7126
[ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50
[ 753.185801] Call Trace:
[ 753.186264] dump_stack+0x7c/0xbb
[ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.187583] print_address_description+0xc7/0x240
[ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189846] __kasan_report+0x12a/0x16f
[ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.191298] kasan_report+0xe/0x20
[ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.192580] ? __netlink_ns_capable+0xc3/0xf0
[ 753.193370] __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[ 753.241201] Allocated by task 7186:
[ 753.241844] save_stack+0x19/0x80
[ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 753.243192] __kmalloc+0x13e/0x300
[ 753.243764] ops_init+0xd6/0x350
[ 753.244314] register_pernet_operations+0x249/0x6f0
[ ... ]
[ 753.251770] Freed by task 7178:
[ 753.252288] save_stack+0x19/0x80
[ 753.252833] __kasan_slab_free+0x111/0x150
[ 753.253962] kfree+0xc7/0x280
[ 753.254509] ops_free_list.part.11+0x1c4/0x2d0
[ 753.255241] unregister_pernet_operations+0x262/0x390
[ ... ]
[ 753.285883] list_add corruption. next->prev should be prev (
ffff8880d48f2458), but was
ffff8880d497d878. (next.
[ 753.287241] ------------[ cut here ]------------
[ 753.287794] kernel BUG at lib/list_debug.c:25!
[ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50
[ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[ 753.293779] RSP: 0018:
ffff8880cae8f398 EFLAGS:
00010286
[ 753.294401] RAX:
0000000000000075 RBX:
ffff8880d497d878 RCX:
0000000000000000
[ 753.296260] RDX:
0000000000000075 RSI:
0000000000000008 RDI:
ffffed10195d1e69
[ 753.297070] RBP:
ffff8880cd250ae0 R08:
ffffed101b4bff21 R09:
ffffed101b4bff21
[ 753.297899] R10:
0000000000000001 R11:
ffffed101b4bff20 R12:
ffff8880d497d878
[ 753.298703] R13:
0000000000000000 R14:
ffff8880cd250ae0 R15:
ffff8880d48f2458
[ 753.299564] FS:
00007f5f79805740(0000) GS:
ffff8880da400000(0000) knlGS:
0000000000000000
[ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 753.301231] CR2:
00007fe8c7ef4f10 CR3:
00000000b71a6006 CR4:
00000000000606f0
[ 753.302183] Call Trace:
[ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp]
[ 753.303037] ? __netlink_ns_capable+0xc3/0xf0
[ 753.303576] __rtnl_newlink+0xb9f/0x11b0
[ 753.304092] ? rtnl_link_unregister+0x230/0x230
Fixes:
459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Tue, 2 Jul 2019 15:23:13 +0000 (00:23 +0900)]
gtp: fix Illegal context switch in RCU read-side critical section.
[ Upstream commit
3f167e1921865b379a9becf03828e7202c7b4917 ]
ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.
Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2
Splat looks like:
[ 130.618881] =============================
[ 130.626382] WARNING: suspicious RCU usage
[ 130.626994] 5.2.0-rc6+ #50 Not tainted
[ 130.627622] -----------------------------
[ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[ 130.629684]
[ 130.629684] other info that might help us debug this:
[ 130.629684]
[ 130.631022]
[ 130.631022] rcu_scheduler_active = 2, debug_locks = 1
[ 130.632136] 4 locks held by gtp-tunnel/1025:
[ 130.632925] #0:
000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[ 130.634159] #1:
00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[ 130.635487] #2:
00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[ 130.636936] #3:
0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[ 130.638348]
[ 130.638348] stack backtrace:
[ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[ 130.641318] Call Trace:
[ 130.641707] dump_stack+0x7c/0xbb
[ 130.642252] ___might_sleep+0x2c0/0x3b0
[ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0
[ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[ 130.644371] genl_family_rcv_msg+0x63a/0x1030
[ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090
[ 130.645845] ? genl_unregister_family+0x630/0x630
[ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0
[ 130.647293] ? check_flags.part.40+0x440/0x440
[ 130.648099] genl_rcv_msg+0xa3/0x130
[ ... ]
Fixes:
459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
csonsino [Wed, 12 Jun 2019 21:00:52 +0000 (15:00 -0600)]
Bluetooth: validate BLE connection interval updates
[ Upstream commit
c49a8682fc5d298d44e8d911f4fa14690ea9485e ]
Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.
The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.
The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.
The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.
Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matias Karhumaa [Tue, 21 May 2019 10:07:22 +0000 (13:07 +0300)]
Bluetooth: Check state in l2cap_disconnect_rsp
[ Upstream commit
28261da8a26f4915aa257d12d506c6ba179d961f ]
Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.
Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.
Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499
L2CAP: Disconnection Request (0x06) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548
L2CAP: Disconnection Response (0x07) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397
L2CAP: Connection Request (0x02) ident 27 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441
L2CAP: Connection Response (0x03) ident 27 len 8
Destination CID: 65
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449
L2CAP: Configure Request (0x04) ident 19 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143
L2CAP: Disconnection Request (0x06) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073
L2CAP: Connection Request (0x02) ident 12 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371
L2CAP: Disconnection Response (0x07) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196
L2CAP: Configure Request (0x04) ident 13 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804
L2CAP: Connection Response (0x03) ident 12 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Fix is to check that channel is in state BT_DISCONN before deleting the
channel.
This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.
Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josua Mayer [Sat, 6 Jul 2019 15:54:46 +0000 (17:54 +0200)]
Bluetooth: 6lowpan: search for destination address in all peers
[ Upstream commit
b188b03270b7f8568fc714101ce82fbf5e811c5a ]
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomas Bortoli [Tue, 28 May 2019 13:42:58 +0000 (15:42 +0200)]
Bluetooth: hci_bcsp: Fix memory leak in rx_skb
[ Upstream commit
4ce9146e0370fcd573f0372d9b4e5a211112567c ]
Syzkaller found that it is possible to provoke a memory leak by
never freeing rx_skb in struct bcsp_struct.
Fix by freeing in bcsp_close()
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 1 Jul 2019 14:27:38 +0000 (16:27 +0200)]
gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
[ Upstream commit
3285170f28a850638794cdfe712eb6d93e51e706 ]
Commit
372e722ea4dd4ca1 ("gpiolib: use descriptors internally") renamed
the functions to use a "gpiod" prefix, and commit
79a9becda8940deb
("gpiolib: export descriptor-based GPIO interface") introduced the "raw"
variants, but both changes forgot to update the comments.
Readd a similar reference to gpiod_set_value(), which was accidentally
removed by commit
1e77fc82110ac36f ("gpio: Add missing open drain/source
handling to gpiod_set_value_cansleep()").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phong Tran [Tue, 2 Jul 2019 00:10:08 +0000 (07:10 +0700)]
net: usb: asix: init MAC address buffers
[ Upstream commit
78226f6eaac80bf30256a33a4926c194ceefdf36 ]
This is for fixing bug KMSAN: uninit-value in ax88772_bind
Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ
Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com
syzbot found the following crash on:
HEAD commit:
f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree: kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=
136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=
602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=
8a3fc6674bbc3978ed4e
compiler: clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=
12788316a00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=
120359aaa00000
==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
__msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
hub_port_connect drivers/usb/core/hub.c:5089 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
process_scheduled_works kernel/workqueue.c:2331 [inline]
worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
kthread+0x4b5/0x4f0 kernel/kthread.c:254
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrei Otcheretianski [Mon, 15 Apr 2019 13:45:04 +0000 (16:45 +0300)]
iwlwifi: mvm: Drop large non sta frames
[ Upstream commit
ac70499ee97231a418dc1a4d6c9dc102e8f64631 ]
In some buggy scenarios we could possible attempt to transmit frames larger
than maximum MSDU size. Since our devices don't know how to handle this,
it may result in asserts, hangs etc.
This can happen, for example, when we receive a large multicast frame
and try to transmit it back to the air in AP mode.
Since in a legal scenario this should never happen, drop such frames and
warn about it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Fri, 28 Jun 2019 11:59:25 +0000 (19:59 +0800)]
bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush()
[ Upstream commit
b387e9b58679c60f5b1e4313939bd4878204fc37 ]
When system memory is in heavy pressure, bch_gc_thread_start() from
run_cache_set() may fail due to out of memory. In such condition,
c->gc_thread is assigned to -ENOMEM, not NULL pointer. Then in following
failure code path bch_cache_set_error(), when cache_set_flush() gets
called, the code piece to stop c->gc_thread is broken,
if (!IS_ERR_OR_NULL(c->gc_thread))
kthread_stop(c->gc_thread);
And KASAN catches such NULL pointer deference problem, with the warning
information:
[ 561.207881] ==================================================================
[ 561.207900] BUG: KASAN: null-ptr-deref in kthread_stop+0x3b/0x440
[ 561.207904] Write of size 4 at addr
000000000000001c by task kworker/15:1/313
[ 561.207913] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G W 5.0.0-vanilla+ #3
[ 561.207916] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[ 561.207935] Workqueue: events cache_set_flush [bcache]
[ 561.207940] Call Trace:
[ 561.207948] dump_stack+0x9a/0xeb
[ 561.207955] ? kthread_stop+0x3b/0x440
[ 561.207960] ? kthread_stop+0x3b/0x440
[ 561.207965] kasan_report+0x176/0x192
[ 561.207973] ? kthread_stop+0x3b/0x440
[ 561.207981] kthread_stop+0x3b/0x440
[ 561.207995] cache_set_flush+0xd4/0x6d0 [bcache]
[ 561.208008] process_one_work+0x856/0x1620
[ 561.208015] ? find_held_lock+0x39/0x1d0
[ 561.208028] ? drain_workqueue+0x380/0x380
[ 561.208048] worker_thread+0x87/0xb80
[ 561.208058] ? __kthread_parkme+0xb6/0x180
[ 561.208067] ? process_one_work+0x1620/0x1620
[ 561.208072] kthread+0x326/0x3e0
[ 561.208079] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 561.208090] ret_from_fork+0x3a/0x50
[ 561.208110] ==================================================================
[ 561.208113] Disabling lock debugging due to kernel taint
[ 561.208115] irq event stamp:
11800231
[ 561.208126] hardirqs last enabled at (
11800231): [<
ffffffff83008538>] do_syscall_64+0x18/0x410
[ 561.208127] BUG: unable to handle kernel NULL pointer dereference at
000000000000001c
[ 561.208129] #PF error: [WRITE]
[ 561.312253] hardirqs last disabled at (
11800230): [<
ffffffff830052ff>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 561.312259] softirqs last enabled at (
11799832): [<
ffffffff850005c7>] __do_softirq+0x5c7/0x8c3
[ 561.405975] PGD 0 P4D 0
[ 561.442494] softirqs last disabled at (
11799821): [<
ffffffff831add2c>] irq_exit+0x1ac/0x1e0
[ 561.791359] Oops: 0002 [#1] SMP KASAN NOPTI
[ 561.791362] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G B W 5.0.0-vanilla+ #3
[ 561.791363] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[ 561.791371] Workqueue: events cache_set_flush [bcache]
[ 561.791374] RIP: 0010:kthread_stop+0x3b/0x440
[ 561.791376] Code: 00 00 65 8b 05 26 d5 e0 7c 89 c0 48 0f a3 05 ec aa df 02 0f 82 dc 02 00 00 4c 8d 63 20 be 04 00 00 00 4c 89 e7 e8 65 c5 53 00 <f0> ff 43 20 48 8d 7b 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
[ 561.791377] RSP: 0018:
ffff88872fc8fd10 EFLAGS:
00010286
[ 561.838895] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838916] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838934] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838948] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838966] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838979] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838996] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 563.067028] RAX:
0000000000000000 RBX:
fffffffffffffffc RCX:
ffffffff832dd314
[ 563.067030] RDX:
0000000000000000 RSI:
0000000000000004 RDI:
0000000000000297
[ 563.067032] RBP:
ffff88872fc8fe88 R08:
fffffbfff0b8213d R09:
fffffbfff0b8213d
[ 563.067034] R10:
0000000000000001 R11:
fffffbfff0b8213c R12:
000000000000001c
[ 563.408618] R13:
ffff88dc61cc0f68 R14:
ffff888102b94900 R15:
ffff88dc61cc0f68
[ 563.408620] FS:
0000000000000000(0000) GS:
ffff888f7dc00000(0000) knlGS:
0000000000000000
[ 563.408622] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 563.408623] CR2:
000000000000001c CR3:
0000000f48a1a004 CR4:
00000000007606e0
[ 563.408625] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 563.408627] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 563.904795] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 563.915796] PKRU:
55555554
[ 563.915797] Call Trace:
[ 563.915807] cache_set_flush+0xd4/0x6d0 [bcache]
[ 563.915812] process_one_work+0x856/0x1620
[ 564.001226] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.033563] ? find_held_lock+0x39/0x1d0
[ 564.033567] ? drain_workqueue+0x380/0x380
[ 564.033574] worker_thread+0x87/0xb80
[ 564.062823] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.118042] ? __kthread_parkme+0xb6/0x180
[ 564.118046] ? process_one_work+0x1620/0x1620
[ 564.118048] kthread+0x326/0x3e0
[ 564.118050] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 564.167066] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.252441] ret_from_fork+0x3a/0x50
[ 564.252447] Modules linked in: msr rpcrdma sunrpc rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib i40iw configfs iw_cm ib_cm libiscsi scsi_transport_iscsi mlx4_ib ib_uverbs mlx4_en ib_core nls_iso8859_1 nls_cp437 vfat fat intel_rapl skx_edac x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ses raid0 aesni_intel cdc_ether enclosure usbnet ipmi_ssif joydev aes_x86_64 i40e scsi_transport_sas mii bcache md_mod crypto_simd mei_me ioatdma crc64 ptp cryptd pcspkr i2c_i801 mlx4_core glue_helper pps_core mei lpc_ich dca wmi ipmi_si ipmi_devintf nd_pmem dax_pmem nd_btt ipmi_msghandler device_dax pcc_cpufreq button hid_generic usbhid mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd ttm megaraid_sas drm usbcore nfit libnvdimm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[ 564.299390] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.348360] CR2:
000000000000001c
[ 564.348362] ---[ end trace
b7f0e5cc7b2103b0 ]---
Therefore, it is not enough to only check whether c->gc_thread is NULL,
we should use IS_ERR_OR_NULL() to check both NULL pointer and error
value.
This patch changes the above buggy code piece in this way,
if (!IS_ERR_OR_NULL(c->gc_thread))
kthread_stop(c->gc_thread);
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eiichi Tsukata [Wed, 26 Jun 2019 05:40:11 +0000 (14:40 +0900)]
EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
[ Upstream commit
d8655e7630dafa88bc37f101640e39c736399771 ]
Commit
9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") assumes
edac_mc_poll_msec to be unsigned long, but the type of the variable still
remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds
write.
Reproducer:
# echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec
KASAN report:
BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150
Write of size 8 at addr
ffffffffb91b2d00 by task bash/1996
CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
Call Trace:
dump_stack+0xca/0x13e
print_address_description.cold+0x5/0x246
__kasan_report.cold+0x75/0x9a
? edac_set_poll_msec+0x140/0x150
kasan_report+0xe/0x20
edac_set_poll_msec+0x140/0x150
? dimmdev_location_show+0x30/0x30
? vfs_lock_file+0xe0/0xe0
? _raw_spin_lock+0x87/0xe0
param_attr_store+0x1b5/0x310
? param_array_set+0x4f0/0x4f0
module_attr_store+0x58/0x80
? module_attr_show+0x80/0x80
sysfs_kf_write+0x13d/0x1a0
kernfs_fop_write+0x2bc/0x460
? sysfs_kf_bin_read+0x270/0x270
? kernfs_notify+0x1f0/0x1f0
__vfs_write+0x81/0x100
vfs_write+0x1e1/0x560
ksys_write+0x126/0x250
? __ia32_sys_read+0xb0/0xb0
? do_syscall_64+0x1f/0x390
do_syscall_64+0xc1/0x390
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa7caa5e970
Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04
RSP: 002b:
00007fff6acfdfe8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000000005 RCX:
00007fa7caa5e970
RDX:
0000000000000005 RSI:
0000000000e95c08 RDI:
0000000000000001
RBP:
0000000000e95c08 R08:
00007fa7cad1e760 R09:
00007fa7cb36a700
R10:
0000000000000073 R11:
0000000000000246 R12:
0000000000000005
R13:
0000000000000001 R14:
00007fa7cad1d600 R15:
0000000000000005
The buggy address belongs to the variable:
edac_mc_poll_msec+0x0/0x40
Memory state around the buggy address:
ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
>
ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
^
ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fix it by changing the type of edac_mc_poll_msec to unsigned int.
The reason why this patch adopts unsigned int rather than unsigned long
is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid
integer conversion bugs and unsigned int will be large enough for
edac_mc_poll_msec.
Reviewed-by: James Morse <james.morse@arm.com>
Fixes:
9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 18 Jun 2019 12:13:47 +0000 (14:13 +0200)]
crypto: asymmetric_keys - select CRYPTO_HASH where needed
[ Upstream commit
90acc0653d2bee203174e66d519fbaaa513502de ]
Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:
crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'
This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro S. M. Rodrigues [Thu, 23 May 2019 19:11:12 +0000 (16:11 -0300)]
ixgbe: Check DDM existence in transceiver before access
[ Upstream commit
655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ferdinand Blomqvist [Thu, 20 Jun 2019 14:10:37 +0000 (17:10 +0300)]
rslib: Fix handling of of caller provided syndrome
[ Upstream commit
ef4d6a8556b637ad27c8c2a2cff1dda3da38e9a9 ]
Check if the syndrome provided by the caller is zero, and act
accordingly.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-6-ferdinand.blomqvist@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ferdinand Blomqvist [Thu, 20 Jun 2019 14:10:34 +0000 (17:10 +0300)]
rslib: Fix decoding of shortened codes
[ Upstream commit
2034a42d1747fc1e1eeef2c6f1789c4d0762cb9c ]
The decoding of shortenend codes is broken. It only works as expected if
there are no erasures.
When decoding with erasures, Lambda (the error and erasure locator
polynomial) is initialized from the given erasure positions. The pad
parameter is not accounted for by the initialisation code, and hence
Lambda is initialized from incorrect erasure positions.
The fix is to adjust the erasure positions by the supplied pad.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-3-ferdinand.blomqvist@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Thu, 30 May 2019 10:50:43 +0000 (12:50 +0200)]
clocksource/drivers/exynos_mct: Increase priority over ARM arch timer
[ Upstream commit
6282edb72bed5324352522d732080d4c1b9dfed6 ]
Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT
(Multi Core Timer) and standard ARM Architected Timers.
There are use cases, where both timer interfaces are used simultanously.
One of such examples is using Exynos MCT for the main system timer and
ARM Architected Timers for the KVM and virtualized guests (KVM requires
arch timers).
Exynos Multi-Core Timer driver (exynos_mct) must be however started
before ARM Architected Timers (arch_timer), because they both share some
common hardware blocks (global system counter) and turning on MCT is
needed to get ARM Architected Timer working properly.
To ensure selecting Exynos MCT as the main system timer, increase MCT
timer rating. To ensure proper starting order of both timers during
suspend/resume cycle, increase MCT hotplug priority over ARM Archictected
Timers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Mon, 24 Jun 2019 16:32:50 +0000 (09:32 -0700)]
libata: don't request sense data on !ZAC ATA devices
[ Upstream commit
ca156e006add67e4beea7896be395160735e09b0 ]
ZAC support added sense data requesting on error for both ZAC and ATA
devices. This seems to cause erratic error handling behaviors on some
SSDs where the device reports sense data availability and then
delivers the wrong content making EH take the wrong actions. The
failure mode was sporadic on a LITE-ON ssd and couldn't be reliably
reproduced.
There is no value in requesting sense data from non-ZAC ATA devices
while there's a significant risk of introducing EH misbehaviors which
are difficult to reproduce and fix. Let's do the sense data dancing
only for ZAC devices.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kyle Meyer [Thu, 20 Jun 2019 19:36:30 +0000 (14:36 -0500)]
perf tools: Increase MAX_NR_CPUS and MAX_CACHES
[ Upstream commit
9f94c7f947e919c343b30f080285af53d0fa9902 ]
Attempting to profile 1024 or more CPUs with perf causes two errors:
perf record -a
[ perf record: Woken up X times to write data ]
way too many cpu caches..
[ perf record: Captured and wrote X MB perf.data (X samples) ]
perf report -C 1024
Error: failed to set cpu bitmap
Requested CPU 1024 too large. Consider raising MAX_NR_CPUS
Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as
MAX_NR_CPUS * 4 returns normal functionality to perf:
perf record -a
[ perf record: Woken up X times to write data ]
[ perf record: Captured and wrote X MB perf.data (X samples) ]
perf report -C 1024
...
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqing Pan [Thu, 30 May 2019 01:49:20 +0000 (09:49 +0800)]
ath10k: fix PCIE device wake up failed
[ Upstream commit
011d4111c8c602ea829fa4917af1818eb0500a90 ]
Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"
The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake
Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.
But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.
Tested HW: QCA9984
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Fri, 7 Jun 2019 11:48:10 +0000 (13:48 +0200)]
mt7601u: fix possible memory leak when the device is disconnected
[ Upstream commit
23377c200b2eb48a60d0f228b2a2e75ed6ee6060 ]
When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning
[ 57.480771] usb 1-1: USB disconnect, device number 2
[ 57.483451] ------------[ cut here ]------------
[ 57.483462] TX urb mismatch
[ 57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00
[ 57.483483] Modules linked in:
[ 57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72
[ 57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[ 57.483502] Workqueue: usb_hub_wq hub_event
[ 57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0
[ 57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f
[ 57.483513] RSP: 0000:
ffffc900000a0d28 EFLAGS:
00010092
[ 57.483516] RAX:
000000000000000f RBX:
ffff88802c0a62c0 RCX:
ffffc900000a0c2c
[ 57.483518] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffffffff810a8371
[ 57.483520] RBP:
ffff88803ced6858 R08:
0000000000000000 R09:
0000000000000001
[ 57.483540] R10:
0000000000000002 R11:
0000000000000000 R12:
0000000000000046
[ 57.483542] R13:
ffff88802c0a6c88 R14:
ffff88803baab540 R15:
ffff88803a0cc078
[ 57.483548] FS:
0000000000000000(0000) GS:
ffff88803eb00000(0000) knlGS:
0000000000000000
[ 57.483550] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 57.483552] CR2:
000055e7f6780100 CR3:
0000000028c86000 CR4:
00000000000006a0
[ 57.483554] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 57.483556] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 57.483559] Call Trace:
[ 57.483561] <IRQ>
[ 57.483565] __usb_hcd_giveback_urb+0x77/0xe0
[ 57.483570] xhci_giveback_urb_in_irq.isra.0+0x8b/0x140
[ 57.483574] handle_cmd_completion+0xf5b/0x12c0
[ 57.483577] xhci_irq+0x1f6/0x1810
[ 57.483581] ? lockdep_hardirqs_on+0x9e/0x180
[ 57.483584] ? _raw_spin_unlock_irq+0x24/0x30
[ 57.483588] __handle_irq_event_percpu+0x3a/0x260
[ 57.483592] handle_irq_event_percpu+0x1c/0x60
[ 57.483595] handle_irq_event+0x2f/0x4c
[ 57.483599] handle_edge_irq+0x7e/0x1a0
[ 57.483603] handle_irq+0x17/0x20
[ 57.483607] do_IRQ+0x54/0x110
[ 57.483610] common_interrupt+0xf/0xf
[ 57.483612] </IRQ>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Tue, 25 Jun 2019 07:26:22 +0000 (16:26 +0900)]
x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c
[ Upstream commit
bc53d3d777f81385c1bb08b07bd1c06450ecc2c1 ]
Without 'set -e', shell scripts continue running even after any
error occurs. The missed 'set -e' is a typical bug in shell scripting.
For example, when a disk space shortage occurs while this script is
running, it actually ends up with generating a truncated capflags.c.
Yet, mkcapflags.sh continues running and exits with 0. So, the build
system assumes it has succeeded.
It will not be re-generated in the next invocation of Make since its
timestamp is newer than that of any of the source files.
Add 'set -e' so that any error in this script is caught and propagated
to the build system.
Since
9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"),
make automatically deletes the target on any failure. So, the broken
capflags.c will be deleted automatically.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20190625072622.17679-1-yamada.masahiro@socionext.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Fri, 7 Jun 2019 11:48:09 +0000 (13:48 +0200)]
mt7601u: do not schedule rx_tasklet when the device has been disconnected
[ Upstream commit
4079e8ccabc3b6d1b503f2376123cb515d14921f ]
Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.
[ 24.921354] usb 3-14: USB disconnect, device number 7
[ 24.921593] ------------[ cut here ]------------
[ 24.921594] RX urb mismatch
[ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #
201903231635
[ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[ 24.921782] Workqueue: usb_hub_wq hub_event
[ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921800] RSP: 0018:
ffff9bd9cfd03d08 EFLAGS:
00010086
[ 24.921802] RAX:
0000000000000000 RBX:
ffff9bd9bf043540 RCX:
0000000000000006
[ 24.921803] RDX:
0000000000000007 RSI:
0000000000000096 RDI:
ffff9bd9cfd16420
[ 24.921804] RBP:
ffff9bd9cfd03d28 R08:
0000000000000002 R09:
00000000000003a8
[ 24.921805] R10:
0000002f485fca34 R11:
0000000000000000 R12:
ffff9bd9bf043c1c
[ 24.921806] R13:
ffff9bd9c62fa3c0 R14:
0000000000000082 R15:
0000000000000000
[ 24.921807] FS:
0000000000000000(0000) GS:
ffff9bd9cfd00000(0000) knlGS:
0000000000000000
[ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 24.921808] CR2:
00007fb2648b0000 CR3:
0000000142c0a004 CR4:
00000000001606e0
[ 24.921809] Call Trace:
[ 24.921812] <IRQ>
[ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140
[ 24.921821] usb_hcd_giveback_urb+0xca/0xe0
[ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[ 24.921834] handle_cmd_completion+0xe02/0x10d0
[ 24.921837] xhci_irq+0x274/0x4a0
[ 24.921838] xhci_msi_irq+0x11/0x20
[ 24.921851] __handle_irq_event_percpu+0x44/0x190
[ 24.921856] handle_irq_event_percpu+0x32/0x80
[ 24.921861] handle_irq_event+0x3b/0x5a
[ 24.921867] handle_edge_irq+0x80/0x190
[ 24.921874] handle_irq+0x20/0x30
[ 24.921889] do_IRQ+0x4e/0xe0
[ 24.921891] common_interrupt+0xf/0xf
[ 24.921892] </IRQ>
[ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[ 24.921354] usb 3-14: USB disconnect, device number 7
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Zabel [Tue, 18 Jun 2019 16:45:22 +0000 (12:45 -0400)]
media: coda: increment sequence offset for the last returned frame
[ Upstream commit
b3b7d96817cdb8b6fc353867705275dce8f41ccc ]
If no more frames are decoded in bitstream end mode, and a previously
decoded frame has been returned, the firmware still increments the frame
number. To avoid a sequence number mismatch after decoder restart,
increment the sequence_offset correction parameter.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Zabel [Tue, 18 Jun 2019 16:45:10 +0000 (12:45 -0400)]
media: coda: fix mpeg2 sequence number handling
[ Upstream commit
56d159a4ec6d8da7313aac6fcbb95d8fffe689ba ]
Sequence number handling assumed that the BIT processor frame number
starts counting at 1, but this is not true for the MPEG-2 decoder,
which starts at 0. Fix the sequence counter offset detection to handle
this.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Wed, 19 Jun 2019 12:18:31 +0000 (14:18 +0200)]
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
[ Upstream commit
2af22f3ec3ca452f1e79b967f634708ff01ced8a ]
Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
are clearly ACPI 5.1 based, given that that is the first ACPI revision
that supports ARM, and introduced the FADT 'arm_boot_flags' field,
which has a non-zero field on those systems.
So in these cases, infer from the ARM boot flags that the FADT must be
5.1 or later, and treat it as 5.1.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Huckleberry [Fri, 14 Jun 2019 18:16:04 +0000 (11:16 -0700)]
timer_list: Guard procfs specific code
[ Upstream commit
a9314773a91a1d3b36270085246a6715a326ff00 ]
With CONFIG_PROC_FS=n the following warning is emitted:
kernel/time/timer_list.c:361:36: warning: unused variable
'timer_list_sops' [-Wunused-const-variable]
static const struct seq_operations timer_list_sops = {
Add #ifdef guard around procfs specific code.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/534
Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miroslav Lichvar [Tue, 18 Jun 2019 15:47:13 +0000 (17:47 +0200)]
ntp: Limit TAI-UTC offset
[ Upstream commit
d897a4ab11dc8a9fda50d2eccc081a96a6385998 ]
Don't allow the TAI-UTC offset of the system clock to be set by adjtimex()
to a value larger than 100000 seconds.
This prevents an overflow in the conversion to int, prevents the CLOCK_TAI
clock from getting too far ahead of the CLOCK_REALTIME clock, and it is
still large enough to allow leap seconds to be inserted at the maximum rate
currently supported by the kernel (once per day) for the next ~270 years,
however unlikely it is that someone can survive a catastrophic event which
slowed down the rotation of the Earth so much.
Reported-by: Weikang shi <swkhack@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anders Roxell [Wed, 12 Jun 2019 16:19:35 +0000 (12:19 -0400)]
media: i2c: fix warning same module names
[ Upstream commit
b2ce5617dad254230551feda3599f2cc68e53ad8 ]
When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511
enabled as loadable modules, we see the following warning:
drivers/gpu/drm/bridge/adv7511/adv7511.ko
drivers/media/i2c/adv7511.ko
Rework so that the file is named adv7511-v4l2.c.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 18 Jun 2019 11:22:13 +0000 (13:22 +0200)]
ipsec: select crypto ciphers for xfrm_algo
[ Upstream commit
597179b0ba550bd83fab1a9d57c42a9343c58514 ]
kernelci.org reports failed builds on arc because of what looks
like an old missed 'select' statement:
net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs':
xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash'
I don't see this in randconfig builds on other architectures, but
it's fairly clear we want to select the hash code for it, like we
do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER
is also required even though it has not popped up in build tests.
Fixes:
17bc19702221 ("ipsec: Use skcipher and ahash when probing algorithms")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Thu, 18 Apr 2019 02:27:18 +0000 (10:27 +0800)]
EDAC/sysfs: Fix memory leak when creating a csrow object
[ Upstream commit
585fb3d93d32dbe89e718b85009f9c322cc554cd ]
In edac_create_csrow_object(), the reference to the object is not
released when adding the device to the device hierarchy fails
(device_add()). This may result in a memory leak.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Kirjanov [Mon, 17 Jun 2019 08:53:40 +0000 (10:53 +0200)]
ipoib: correcly show a VF hardware address
[ Upstream commit
64d701c608fea362881e823b666327f5d28d7ffd ]
in the case of IPoIB with SRIOV enabled hardware
ip link show command incorrecly prints
0 instead of a VF hardware address.
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: just copy an address without modifing ifla_vf_mac
v2->v3: update the changelog
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Wang [Mon, 17 Jun 2019 09:20:54 +0000 (05:20 -0400)]
vhost_net: disable zerocopy by default
[ Upstream commit
098eadce3c622c07b328d0a43dda379b38cf7c5e ]
Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.
It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.
[1] https://patchwork.kernel.org/patch/3787671/
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Mon, 17 Jun 2019 17:32:53 +0000 (14:32 -0300)]
perf evsel: Make perf_evsel__name() accept a NULL argument
[ Upstream commit
fdbdd7e8580eac9bdafa532746c865644d125e34 ]
In which case it simply returns "unknown", like when it can't figure out
the evsel->name value.
This makes this code more robust and fixes a problem in 'perf trace'
where a NULL evsel was being passed to a routine that only used the
evsel for printing its name when a invalid syscall id was passed.
Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Dichtel [Fri, 14 Jun 2019 09:13:55 +0000 (11:13 +0200)]
xfrm: fix sa selector validation
[ Upstream commit
b8d6d0079757cbd1b69724cfd1c08e2171c68cee ]
After commit
b38ff4075a80, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4
In fact, the selector is not mandatory, allow the user to provide an empty
selector.
Fixes:
b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Thu, 13 Jun 2019 22:30:41 +0000 (15:30 -0700)]
blkcg, writeback: dead memcgs shouldn't contribute to writeback ownership arbitration
[ Upstream commit
6631142229005e1b1c311a09efe9fb3cfdac8559 ]
wbc_account_io() collects information on cgroup ownership of writeback
pages to determine which cgroup should own the inode. Pages can stay
associated with dead memcgs but we want to avoid attributing IOs to
dead blkcgs as much as possible as the association is likely to be
stale. However, currently, pages associated with dead memcgs
contribute to the accounting delaying and/or confusing the
arbitration.
Fix it by ignoring pages associated with dead memcgs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>