Bluetooth: virtio_bt: fix memory leak in virtbt_rx_handle()

[ Upstream commit 1d0688421449718c6c5f46e458a378c9b530ba18 ]

On the reception of packets with an invalid packet type, the memory of
the allocated socket buffers is never freed. Add a default case that frees
these to avoid a memory leak.

Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: dsi: Reconfigure hardware on resume()

commit e584cdc1549932f87a2707b56bc588cfac5d89e0 upstream.

Since commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we perform most HW configuration in the bind()
function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:

  dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
  panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110

Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).

Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.

Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: dsi: Disable PLL clock on bind error

[ Upstream commit 5a614570172e1c9f59035d259dd735acd4f1c01b ]

Fix some error handling here noticed in review of other changes.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.4.I8bb7a91ecc411d56bc155763faa15f289d7fc074@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: dsi: Hold pm-runtime across bind/unbind

commit 514db871922f103886ad4d221cf406b4fcc5e74a upstream.

In commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we moved most HW configuration to bind(), but we
didn't move the runtime PM management. Therefore, depending on initial
boot state, runtime-PM workqueue delays, and other timing factors, we
may disable our power domain in between the hardware configuration
(bind()) and when we enable the display. This can cause us to lose
hardware state and fail to configure our display. For example:

  dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
  panel-innolux-p079zca ff960000.mipi.0: failed to write command 0

or:

  dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
  panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110

We should match the runtime PM to the lifetime of the bind()/unbind()
cycle.

Tested on Acer Chrometab 10 (RK3399 Gru-Scarlet), with panel drivers
built either as modules or built-in.

Side notes: it seems one is more likely to see this problem when the
panel driver is built into the kernel. I've also seen this problem
bisect down to commits that simply changed Kconfig dependencies, because
it changed the order in which driver init functions were compiled into
the kernel, and therefore the ordering and timing of built-in device
probe.

Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Link: https://lore.kernel.org/linux-rockchip/9aedfb528600ecf871885f7293ca4207c84d16c1.camel@gmail.com/
Reported-by: <aleksandr.o.makarov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.1.Ic2904d37f30013a7f3d8476203ad3733c186827e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: dsi: Fix unbalanced clock on probe error

[ Upstream commit 251888398753924059f3bb247a44153a2853137f ]

Our probe() function never enabled this clock, so we shouldn't disable
it if we fail to probe the bridge.

Noted by inspection.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.3.Ie8ceefb51ab6065a1151869b6fcda41a467d4d2c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: innolux-p079zca: Delete panel on attach() failure

[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ]

If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.

This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.

Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: kingdisplay-kd097d04: Delete panel on attach() failure

[ Upstream commit 5f31dbeae8a88f31c3eb4eb526ab4807c40da241 ]

If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.

Fixes: 2a994cbed6b2 ("drm/panel: Add Kingdisplay KD097D04 panel driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.1.Icb4d9dbc1817f4e826361a4f1cea7461541668f0@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: fix null-ptr-deref in drm_dev_init_release()

[ Upstream commit acf20ed020ffa4d6cc8347e8d356509b95df3cbe ]

I got a null-ptr-deref report:

[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
 dump_stack_lvl+0x6c/0x8b
 kasan_report.cold+0x64/0xdb
 __asan_load8+0x69/0x90
 iput+0x3c/0x4a0
 drm_dev_init_release+0x39/0xb0 [drm]
 drm_managed_release+0x158/0x2d0 [drm]
 drm_dev_init+0x3a7/0x4c0 [drm]
 __devm_drm_dev_alloc+0x55/0xd0 [drm]
 mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
 spi_probe+0xeb/0x130
...
 entry_SYSCALL_64_after_hwframe+0x44/0xae

If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.

drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode

Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.

Fixes: 2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013114139.4042207-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: display-connector: fix an uninitialized pointer in probe()

[ Upstream commit 189723fbe9aca18d6f7d638c59a40288030932b5 ]

The "label" pointer is used for debug output.  The code assumes that it
is either NULL or valid, but it is never set to NULL.  It is either
valid or uninitialized.

Fixes: 0c275c30176b ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Fix not initializing sk_peer_pid

[ Upstream commit f5ff291098f70a70b344df1e388596755c3c8315 ]

In order to group sockets being connected using L2CAP_MODE_EXT_FLOWCTL
the pid is used but sk_peer_pid was not being initialized as it is
currently only done for af_unix.

Fixes: b48596d1dc25 ("Bluetooth: L2CAP: Add get_peer_pid callback")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: Put BO in its memory manager's lru list

commit 781050b0a3164934857c300bb0bc291e38c26b6f upstream.

After we move BO to a new memory region, we should put it to
the new memory manager's lru list regardless we unlock the resv or not.

Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110043149.57554-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode

commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream.

Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond
i_size under memory pressure").

Here are call traces causing race:

   Call Trace 1:
     shmem_unused_huge_shrink+0x3ae/0x410
     ? __list_lru_walk_one.isra.5+0x33/0x160
     super_cache_scan+0x17c/0x190
     shrink_slab.part.55+0x1ef/0x3f0
     shrink_node+0x10e/0x330
     kswapd+0x380/0x740
     kthread+0xfc/0x130
     ? mem_cgroup_shrink_node+0x170/0x170
     ? kthread_create_on_node+0x70/0x70
     ret_from_fork+0x1f/0x30

   Call Trace 2:
     shmem_evict_inode+0xd8/0x190
     evict+0xbe/0x1c0
     do_unlinkat+0x137/0x330
     do_syscall_64+0x76/0x120
     entry_SYSCALL_64_after_hwframe+0x3d/0xa2

A simple explanation:

Image there are 3 items in the local list (@list).  In the first
traversal, A is not deleted from @list.

  1)    A->B->C
        ^
        |
        pos (leave)

In the second traversal, B is deleted from @list.  Concurrently, A is
deleted from @list through shmem_evict_inode() since last reference
counter of inode is dropped by other thread.  Then the @list is corrupted.

  2)    A->B->C
        ^  ^
        |  |
     evict pos (drop)

We should make sure the inode is either on the global list or deleted from
any local list before iput().

Fixed by moving inodes back to global list before we put them.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211125064502.99983-1-ligang.bdlg@bytedance.com
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath11k: add string type to search board data in board-2.bin for WCN6855

commit fc95d10ac41d75c14a81afcc8722333d8b2cf80f upstream.

Currently ath11k only support string type with bus, chip id and board id
such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
"bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
board-2.bin. For WCN6855, it is not enough to distinguish all different
chips.

This is to add a new string type which include bus, chip id, board id,
vendor, device, subsystem-vendor and subsystem-device for WCN6855.

ath11k will first load board-2.bin and search in it for the board data
with the above parameters, if matched one board data, then download it
to firmware, if not matched any one, then ath11k will download the file
board.bin to firmware.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211111065340.20187-1-quic_wgong@quicinc.com
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages

commit c4dc63f0032c77464fbd4e7a6afc22fa6913c4a7 upstream.

In kdump kernel of x86_64, page allocation failure is observed:

 kworker/u2:2: page allocation failure: order:0, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
 CPU: 0 PID: 55 Comm: kworker/u2:2 Not tainted 5.16.0-rc4+ #5
 Hardware name: AMD Dinar/Dinar, BIOS RDN1505B 06/05/2013
 Workqueue: events_unbound async_run_entry_fn
 Call Trace:
  <TASK>
  dump_stack_lvl+0x48/0x5e
  warn_alloc.cold+0x72/0xd6
  __alloc_pages_slowpath.constprop.0+0xc69/0xcd0
  __alloc_pages+0x1df/0x210
  new_slab+0x389/0x4d0
  ___slab_alloc+0x58f/0x770
  __slab_alloc.constprop.0+0x4a/0x80
  kmem_cache_alloc_trace+0x24b/0x2c0
  sr_probe+0x1db/0x620
  ......
  device_add+0x405/0x920
  ......
  __scsi_add_device+0xe5/0x100
  ata_scsi_scan_host+0x97/0x1d0
  async_run_entry_fn+0x30/0x130
  process_one_work+0x1e8/0x3c0
  worker_thread+0x50/0x3b0
  ? rescuer_thread+0x350/0x350
  kthread+0x16b/0x190
  ? set_kthread_struct+0x40/0x40
  ret_from_fork+0x22/0x30
  </TASK>
 Mem-Info:
 ......

The above failure happened when calling kmalloc() to allocate buffer with
GFP_DMA.  It requests to allocate slab page from DMA zone while no managed
pages at all in there.

 sr_probe()
 --> get_capabilities()
     --> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);

Because in the current kernel, dma-kmalloc will be created as long as
CONFIG_ZONE_DMA is enabled.  However, kdump kernel of x86_64 doesn't have
managed pages on DMA zone since commit 6f599d84231f ("x86/kdump: Always
reserve the low 1M when the crashkernel option is specified").  The
failure can be always reproduced.

For now, let's mute the warning of allocation failure if requesting pages
from DMA zone while no managed pages.

[akpm@linux-foundation.org: fix warning]

Link: https://lkml.kernel.org/r/20211223094435.248523-4-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma/pool: create dma atomic pool only if dma zone has managed pages

commit a674e48c5443d12a8a43c3ac42367aa39505d506 upstream.

Currently three dma atomic pools are initialized as long as the relevant
kernel codes are built in.  While in kdump kernel of x86_64, this is not
right when trying to create atomic_pool_dma, because there's no managed
pages in DMA zone.  In the case, DMA zone only has low 1M memory
presented and locked down by memblock allocator.  So no pages are added
into buddy of DMA zone.  Please check commit f1d4d47c5851 ("x86/setup:
Always reserve the first 1M of RAM").

Then in kdump kernel of x86_64, it always prints below failure message:

 DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
 swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018
 Call Trace:
  dump_stack+0x7f/0xa1
  warn_alloc.cold+0x72/0xd6
  __alloc_pages_slowpath.constprop.0+0xf29/0xf50
  __alloc_pages+0x24d/0x2c0
  alloc_page_interleave+0x13/0xb0
  atomic_pool_expand+0x118/0x210
  __dma_atomic_pool_init+0x45/0x93
  dma_atomic_pool_init+0xdb/0x176
  do_one_initcall+0x67/0x320
  kernel_init_freeable+0x290/0x2dc
  kernel_init+0xa/0x111
  ret_from_fork+0x22/0x30
 Mem-Info:
 ......
 DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
 DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

Here, let's check if DMA zone has managed pages, then create
atomic_pool_dma if yes.  Otherwise just skip it.

Link: https://lkml.kernel.org/r/20211223094435.248523-3-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm_zone: add function to check if managed dma zone exists

commit 62b3107073646e0946bd97ff926832bafb846d17 upstream.

Patch series "Handle warning of allocation failure on DMA zone w/o
managed pages", v4.

**Problem observed:
On x86_64, when crash is triggered and entering into kdump kernel, page
allocation failure can always be seen.

 ---------------------------------
 DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
 swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
 CPU: 0 PID: 1 Comm: swapper/0
 Call Trace:
  dump_stack+0x7f/0xa1
  warn_alloc.cold+0x72/0xd6
  ......
  __alloc_pages+0x24d/0x2c0
  ......
  dma_atomic_pool_init+0xdb/0x176
  do_one_initcall+0x67/0x320
  ? rcu_read_lock_sched_held+0x3f/0x80
  kernel_init_freeable+0x290/0x2dc
  ? rest_init+0x24f/0x24f
  kernel_init+0xa/0x111
  ret_from_fork+0x22/0x30
 Mem-Info:
 ------------------------------------

***Root cause:
In the current kernel, it assumes that DMA zone must have managed pages
and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not
always true. E.g in kdump kernel of x86_64, only low 1M is presented and
locked down at very early stage of boot, so that this low 1M won't be
added into buddy allocator to become managed pages of DMA zone. This
exception will always cause page allocation failure if page is requested
from DMA zone.

***Investigation:
This failure happens since below commit merged into linus's tree.
  1a6a9044b967 x86/setup: Remove CONFIG_X86_RESERVE_LOW and reservelow= options
  23721c8e92f7 x86/crash: Remove crash_reserve_low_1M()
  f1d4d47c5851 x86/setup: Always reserve the first 1M of RAM
  7c321eb2b843 x86/kdump: Remove the backup region handling
  6f599d84231f x86/kdump: Always reserve the low 1M when the crashkernel option is specified

Before them, on x86_64, the low 640K area will be reused by kdump kernel.
So in kdump kernel, the content of low 640K area is copied into a backup
region for dumping before jumping into kdump. Then except of those firmware
reserved region in [0, 640K], the left area will be added into buddy
allocator to become available managed pages of DMA zone.

However, after above commits applied, in kdump kernel of x86_64, the low
1M is reserved by memblock, but not released to buddy allocator. So any
later page allocation requested from DMA zone will fail.

At the beginning, if crashkernel is reserved, the low 1M need be locked
down because AMD SME encrypts memory making the old backup region
mechanims impossible when switching into kdump kernel.

Later, it was also observed that there are BIOSes corrupting memory
under 1M. To solve this, in commit f1d4d47c5851, the entire region of
low 1M is always reserved after the real mode trampoline is allocated.

Besides, recently, Intel engineer mentioned their TDX (Trusted domain
extensions) which is under development in kernel also needs to lock down
the low 1M. So we can't simply revert above commits to fix the page allocation
failure from DMA zone as someone suggested.

***Solution:
Currently, only DMA atomic pool and dma-kmalloc will initialize and
request page allocation with GFP_DMA during bootup.

So only initializ DMA atomic pool when DMA zone has available managed
pages, otherwise just skip the initialization.

For dma-kmalloc(), for the time being, let's mute the warning of
allocation failure if requesting pages from DMA zone while no manged
pages.  Meanwhile, change code to use dma_alloc_xx/dma_map_xx API to
replace kmalloc(GFP_DMA), or do not use GFP_DMA when calling kmalloc() if
not necessary.  Christoph is posting patches to fix those under
drivers/scsi/.  Finally, we can remove the need of dma-kmalloc() as people
suggested.

This patch (of 3):

In some places of the current kernel, it assumes that dma zone must have
managed pages if CONFIG_ZONE_DMA is enabled.  While this is not always
true.  E.g in kdump kernel of x86_64, only low 1M is presented and locked
down at very early stage of boot, so that there's no managed pages at all
in DMA zone.  This exception will always cause page allocation failure if
page is requested from DMA zone.

Here add function has_managed_dma() and the relevant helper functions to
check if there's DMA zone with managed pages.  It will be used in later
patches.

Link: https://lkml.kernel.org/r/20211223094435.248523-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20211223094435.248523-2-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller

commit e445375882883f69018aa669b67cbb37ec873406 upstream.

Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU.  Add it to the list of devices that need the
quirk.

Without this patch, device initialization fails with DMA errors:

  ata8: softreset failed (1st FIS failed)
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized:

  ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
  ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
  ata8.00: configured for UDMA/100
  scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5

Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <sam@bingner.com>
Tested-by: Sam Bingner <sam@bingner.com>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma_fence_array: Fix PENDING_ERROR leak in dma_fence_array_signaled()

commit 95d35838880fb040ccb9fe4a48816bd0c8b62df5 upstream.

If a dma_fence_array is reported signaled by a call to
dma_fence_is_signaled(), it may leak the PENDING_ERROR status.

Fix this by clearing the PENDING_ERROR status if we return true in
dma_fence_array_signaled().

v2:
- Update Cc list, and add R-b.

Fixes: 1f70b8b812f3 ("dma-fence: Propagate errors to dma-fence-array container")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211129152727.448908-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio/virtio_mem: handle a possible NULL as a memcpy parameter

commit cf4a4493ff70874f8af26d75d4346c591c298e89 upstream.

There is a check for vm->sbm.sb_states before, and it should check
it here as well.

Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20211222011225.40573-1-flyingpeng@tencent.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tegra: Add back arm_iommu_detach_device()

commit d210919dbdc8a82c676cc3e3c370b1802be63124 upstream.

DMA buffers of 2D/3D engines aren't mapped properly when
CONFIG_ARM_DMA_USE_IOMMU=y. The memory management code of Tegra DRM driver
has a longstanding overhaul overdue and it's not obvious where the problem
is in this case. Hence let's add back the old workaround which we already
had sometime before. It explicitly detaches DRM devices from the offending
implicit IOMMU domain. This fixes a completely broken 2d/3d drivers in
case of ARM32 multiplatform kernel config.

Cc: stable@vger.kernel.org
Fixes: fa6661b7aa0b ("drm/tegra: Optionally attach clients to the IOMMU")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: host1x: Add back arm_iommu_detach_device()

commit d5185965c3b59073c4520bad7dd2adf725b9abba upstream.

Host1x DMA buffer isn't mapped properly when CONFIG_ARM_DMA_USE_IOMMU=y.
The memory management code of Host1x driver has a longstanding overhaul
overdue and it's not obvious where the problem is in this case. Hence
let's add back the old workaround which we already had sometime before.
It explicitly detaches Host1x device from the offending implicit IOMMU
domain. This fixes a completely broken Host1x DMA in case of ARM32
multiplatform kernel config.

Cc: stable@vger.kernel.org
Fixes: af1cbfb9bf0f ("gpu: host1x: Support DMA mapping of buffers")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure

commit a556cfe4cabc6d79cbb7733f118bbb420b376fe6 upstream.

In __arm_v7s_alloc_table function:
iommu call kmem_cache_alloc to allocate page table, this function
allocate memory may fail, when kmem_cache_alloc fails to allocate
table, call virt_to_phys will be abnomal and return unexpected phys
and goto out_free, then call kmem_cache_free to release table will
trigger KE, __get_free_pages and free_pages have similar problem,
so add error handle for page table allocation failure.

Fixes: 29859aeb8a6e ("iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.10.*
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20211207113315.29109-1-yf.wang@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: update alternate function of signal PD20

commit 12f332d2dd3187472f595b678246adb10d886bd0 upstream.

The alternate function of PD20 is 4 as per the datasheet of
sama7g5 and not 5 as defined earlier.

Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211208063553.19807-1-Hari.PrasathGE@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Fix exec handling in erratum 1418040 workaround

commit 38e0257e0e6f4fef2aa2966b089b56a8b1cfb75c upstream.

The erratum 1418040 workaround enables CNTVCT_EL1 access trapping in EL0
when executing compat threads. The workaround is applied when switching
between tasks, but the need for the workaround could also change at an
exec(), when a non-compat task execs a compat binary or vice versa. Apply
the workaround in arch_setup_new_exec().

This leaves a small window of time between SET_PERSONALITY and
arch_setup_new_exec where preemption could occur and confuse the old
workaround logic that compares TIF_32BIT between prev and next. Instead, we
can just read cntkctl to make sure it's in the state that the next task
needs. I measured cntkctl read time to be about the same as a mov from a
general-purpose register on N1. Update the workaround logic to examine the
current value of cntkctl instead of the previous task's compat state.

Fixes: d49f7d7376d0 ("arm64: Move handling of erratum 1418040 into C code")
Cc: <stable@vger.kernel.org> # 5.9.x
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211220234114.3926-1-scott@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/pmem: Fix reference counting for delayed work

commit 08b9e0ab8af48895337192e683de44ab1e1b7427 upstream.

There is a potential race between queue_work() returning and the
queued-work running that could result in put_device() running before
get_device(). Introduce the cxl_nvdimm_bridge_state_work() helper that
takes the reference unconditionally, but drops it if no new work was
queued, to keep the references balanced.

Fixes: 8fdcb1704f61 ("cxl/pmem: Add initial infrastructure for pmem support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163553734757.2509761.3305231863616785470.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: core: Fix race while handling SYS_ERR at power up

commit d651ce8e917fa1bf6cfab8dca74c512edffc35d3 upstream.

During SYS_ERR condition, as a response to the MHI_RESET from host, some
devices tend to issue BHI interrupt without clearing the SYS_ERR state in
the device. This creates a race condition and causes a failure in booting
up the device.

The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
handling in mhi_async_power_up(). Once the host detects that the device
is in SYS_ERR state, it issues MHI_RESET and waits for the device to
process the reset request. During this time, the device triggers the BHI
interrupt to the host without clearing SYS_ERR condition. So the host
starts handling the SYS_ERR condition again.

To fix this issue, let's register the IRQ handler only after handling the
SYS_ERR check to avoid getting spurious IRQs from the device.

Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up")
Cc: stable@vger.kernel.org
Reported-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: core: Fix reading wake_capable channel configuration

commit 42c4668f7efe1485dfc382517b412c0c6ab102b8 upstream.

The 'wake-capable' entry in channel configuration is not set when
parsing the configuration specified by the controller driver. Add
the missing entry to ensure channel is correctly specified as a
'wake-capable' channel.

Link: https://lore.kernel.org/r/1638320491-13382-1-git-send-email-quic_bbhatt@quicinc.com
Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: pci_generic: Graceful shutdown on freeze

commit f77097ec8c0141a4b5cf3722a246be0cb5677e29 upstream.

There is no reason for shutting down MHI ungracefully on freeze,
this causes the MHI host stack & device stack to not be aligned
anymore since the proper MHI reset sequence is not performed for
ungraceful shutdown.

Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Cc: stable@vger.kernel.org
Suggested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()

commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.

On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.

Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:

Disassembly of section .rodata:

0000000000000000 <.lkdtm_rodata_do_nothing>:
   0: 00 00 00 00  .long 0x0

Add the contents flag in order to keep the content of the section
while renaming it.

Disassembly of section .rodata:

0000000000000000 <.lkdtm_rodata_do_nothing>:
   0: 4e 80 00 20  blr

Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046

commit 9020ef659885f2622cfb386cc229b6d618362895 upstream.

IIO triggers are software IRQ chips that split an incoming IRQ into
separate IRQs routed to all devices using the trigger.
When all consumers are done then a trigger callback reenable() is
called.  There are a few circumstances under which this can happen
in atomic context.

1) A single user of the trigger that calls the iio_trigger_done()
function from interrupt context.
2) A race between disconnecting the last device from a trigger and
the trigger itself sucessfully being disabled.

To avoid a resulting scheduling whilst atomic, close this second corner
by using schedule_work() to ensure the reenable is not done in atomic
context.

Note that drivers must be careful to manage the interaction of
set_state() and reenable() callbacks to ensure appropriate reference
counting if they are relying on the same hardware controls.

Deliberately taking this the slow path rather than via a fixes tree
because the error has hard to hit and I would like it to soak for a while
before hitting a release kernel.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211017172209.112387-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs

commit c9791a94384af07592d29504004d2255dbaf8663 upstream.

Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.

Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.

Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.

Reported-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw>
Fixes: c458b7ca3fd0 ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw> #UP-extremei11
Link: https://lore.kernel.org/r/20211205172728.2826512-1-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: fix client dma reply status

commit 6b0b80ac103b2a40c72a47c301745fd1f4ef4697 upstream.

Don't blindly copy status value received from the firmware
into internal client status field,
It may be positive and ERR_PTR(ret) will translate it
into an invalid address and the caller will crash.

Put the error code into the client status on failure.

Fixes: 369aea845951 ("mei: implement client dma setup.")
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: : Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211228082047.378115-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: softing_cs: softingcs_probe(): fix memleak on registration failure

commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.

In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).

Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org
Cc: stable@vger.kernel.org # 2.6.38
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec-pin: fix interrupt en/disable handling

commit 713bdfa10b5957053811470d298def9537d9ff13 upstream.

The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.

Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.

If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: stk1160: fix control-message timeouts

commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: stable@vger.kernel.org # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pvrusb2: fix control-message timeouts

commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org # 2.6.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: redrat3: fix control-message timeouts

commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dib0700: fix undefined behavior in tuner shutdown

commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.

This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.

Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.

The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.

Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.

Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org
Cc: stable@vger.kernel.org
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <michael.kuron@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: s2255: fix control-message timeouts

commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Use the common control-message timeout define for the five-second
timeouts.

Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cpia2: fix control-message timeouts

commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: stable@vger.kernel.org # 2.6.17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: fix control-message timeouts

commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: stable@vger.kernel.org # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mceusb: fix control-message timeouts

commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: flexcop-usb: fix control-message timeouts

commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.

Also note that two of the timeout defines are currently unused.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-ioctl.c: readbuffers depends on V4L2_CAP_READWRITE

commit cd9d9377ed235b294a492a094e1666178a5e78fd upstream.

If V4L2_CAP_READWRITE is not set, then readbuffers must be set to 0,
otherwise v4l2-compliance will complain.

A note on the Fixes tag below: this patch does not really fix that commit,
but it can be applied from that commit onwards. For older code there is no
guarantee that device_caps is set, so even though this patch would apply,
it will not work reliably.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 049e684f2de9 (media: v4l2-dev: fix WARN_ON(!vdev->device_caps))
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov8865: Disable only enabled regulators on error path

commit cbe0b3af73bf72fad197756f026084404e2bcdc7 upstream.

If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.

Fix this by disabling only clocks and regulators that were enabled
previously.

Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: fix a deadlock situation

commit a9e6107616bb8108aa4fc22584a05e69761a91f7 upstream.

The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.

However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.

This obviously causes a deadlock.

This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.

But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.

This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.

This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: add reserved room in ipc request/response

commit 41dbda16a0902798e732abc6599de256b9dc3b27 upstream.

Whenever new parameter is added to smb configuration, It is possible
to break the execution of the IPC daemon by mismatch size of
request/response. This patch tries to reserve space in ipc request/response
in advance to prevent that.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: limits exceeding the maximum allowable outstanding requests

commit b589f5db6d4af8f14d70e31e1276b4c017668a26 upstream.

If the client ignores the CreditResponse received from the server and
continues to send the request, ksmbd limits the requests if it exceeds
smb2 max credits.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: move credit charge deduction under processing request

commit 914d7e5709ac59ded70bea7956d408fe2acd7c3c upstream.

Moves the credit charge deduction from total_credits under the processing
a request. When repeating smb2 lock request and other command request,
there will be a problem that ->total_credits does not decrease.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: add support for smb2 max credit parameter

commit 004443b3f6d722b455cf963ed7c3edd7f4772405 upstream.

Add smb2 max credits parameter to adjust maximum credits value to limit
number of outstanding requests.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix guest connection failure with nautilus

commit ac090d9c90b087d6fb714e54b2a6dd1e6c373ed6 upstream.

MS-SMB2 describe session sign like the following.
Session.SigningRequired MUST be set to TRUE under the following conditions:
 - If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode
   field of the client request.
 - If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
   field and Session.IsAnonymous is FALSE and either Connection.ShouldSign
   or global RequireMessageSigning is TRUE.

When trying guest account connection using nautilus, The login failure
happened on session setup. ksmbd does not allow this connection
when the user is a guest and the connection sign is set. Just do not set
session sign instead of error response as described in the specification.
And this change improves the guest connection in Nautilus.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: uninitialized variable in create_socket()

commit b207602fb04537cb21ac38fabd7577eca2fa05ae upstream.

The "ksmbd_socket" variable is not initialized on this error path.

Cc: stable@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: add Marvell specific PHY loopback

commit 020a45aff1190c32b1087cd75b57fbf6bff46ea6 upstream.

Existing genphy_loopback() is not applicable for Marvell PHY. Besides
configuring bit-6 and bit-13 in Page 0 Register 0 (Copper Control
Register), it is also required to configure same bits  in Page 2
Register 21 (MAC Specific Control Register 2) according to speed of
the loopback is operating.

Tested working on Marvell88E1510 PHY for all speeds (1000/100/10Mbps).

FIXME: Based on trial and error test, it seem 1G need to have delay between
soft reset and loopback enablement.

Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: cmos: take rtc_lock while reading from CMOS

commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.

Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.

Use spin_lock_irq() like the rest of the function.

Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/nolibc: fix incorrect truncation of exit code

commit de0244ae40ae91145faaf164a4252347607c3711 upstream.

Ammar Faizi reported that our exit code handling is wrong. We truncate
it to the lowest 8 bits but the syscall itself is expected to take a
regular 32-bit signed integer, not an unsigned char. It's the kernel
that later truncates it to the lowest 8 bits. The difference is visible
in strace, where the program below used to show exit(255) instead of
exit(-1):

  int main(void)
  {
        return -1;
  }

This patch applies the fix to all archs. x86_64, i386, arm64, armv7 and
mips were all tested and confirmed to work fine now. Risc-v was not
tested but the change is trivial and exactly the same as for other archs.

Reported-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/nolibc: i386: fix initial stack alignment

commit ebbe0d8a449d183fa43b42d84fcb248e25303985 upstream.

After re-checking in the spec and comparing stack offsets with glibc,
The last pushed argument must be 16-byte aligned (i.e. aligned before the
call) so that in the callee esp+4 is multiple of 16, so the principle is
the 32-bit equivalent to what Ammar fixed for x86_64. It's possible that
32-bit code using SSE2 or MMX could have been affected. In addition the
frame pointer ought to be zero at the deepest level.

Link: https://gitlab.com/x86-psABIs/i386-ABI/-/wikis/Intel386-psABI
Cc: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: x86/aesni - don't require alignment of data

commit d480a26bdf872529919e7c30e17f79d0d7b8c4da upstream.

x86 AES-NI routines can deal with unaligned data. Crypto context
(key, iv etc.) have to be aligned but we take care of that separately
by copying it onto the stack. We were feeding unaligned data into
crypto routines up until commit 83c83e658863 ("crypto: aesni -
refactor scatterlist processing") switched to use the full
skcipher API which uses cra_alignmask to decide data alignment.

This fixes 21% performance regression in kTLS.

Tested by booting with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
(and running thru various kTLS packets).

CC: stable@vger.kernel.org # 5.15+
Fixes: 83c83e658863 ("crypto: aesni - refactor scatterlist processing")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/nolibc: x86-64: Fix startup code bug

commit 937ed91c712273131de6d2a02caafd3ee84e0c72 upstream.

Before this patch, the `_start` function looks like this:
```
0000000000001170 <_start>:
    1170: pop    %rdi
    1171: mov    %rsp,%rsi
    1174: lea    0x8(%rsi,%rdi,8),%rdx
    1179: and    $0xfffffffffffffff0,%rsp
    117d: sub    $0x8,%rsp
    1181: call   1000 <main>
    1186: movzbq %al,%rdi
    118a: mov    $0x3c,%rax
    1191: syscall
    1193: hlt
    1194: data16 cs nopw 0x0(%rax,%rax,1)
    119f: nop
```
Note the "and" to %rsp with $-16, it makes the %rsp be 16-byte aligned,
but then there is a "sub" with $0x8 which makes the %rsp no longer
16-byte aligned, then it calls main. That's the bug!

What actually the x86-64 System V ABI mandates is that right before the
"call", the %rsp must be 16-byte aligned, not after the "call". So the
"sub" with $0x8 here breaks the alignment. Remove it.

An example where this rule matters is when the callee needs to align
its stack at 16-byte for aligned move instruction, like `movdqa` and
`movaps`. If the callee can't align its stack properly, it will result
in segmentation fault.

x86-64 System V ABI also mandates the deepest stack frame should be
zero. Just to be safe, let's zero the %rbp on startup as the content
of %rbp may be unspecified when the program starts. Now it looks like
this:
```
0000000000001170 <_start>:
    1170: pop    %rdi
    1171: mov    %rsp,%rsi
    1174: lea    0x8(%rsi,%rdi,8),%rdx
    1179: xor    %ebp,%ebp                # zero the %rbp
    117b: and    $0xfffffffffffffff0,%rsp # align the %rsp
    117f: call   1000 <main>
    1184: movzbq %al,%rdi
    1188: mov    $0x3c,%rax
    118f: syscall
    1191: hlt
    1192: data16 cs nopw 0x0(%rax,%rax,1)
    119d: nopl   (%rax)
```

Cc: Bedirhan KURT <windowz414@gnuweeb.org>
Cc: Louvian Lyndal <louvianlyndal@gmail.com>
Reported-by: Peter Cordes <peter@cordes.ca>
Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
[wt: I did this on purpose due to a misunderstanding of the spec, other
     archs will thus have to be rechecked, particularly i386]
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/gpu: Reserve stolen memory for first integrated Intel GPU

commit 9c494ca4d3a535f9ca11ad6af1813983c1c6cbdd upstream.

"Stolen memory" is memory set aside for use by an Intel integrated GPU.
The intel_graphics_quirks() early quirk reserves this memory when it is
called for a GPU that appears in the intel_early_ids[] table of integrated
GPUs.

Previously intel_graphics_quirks() was marked as QFLAG_APPLY_ONCE, so it
was called only for the first Intel GPU found.  If a discrete GPU happened
to be enumerated first, intel_graphics_quirks() was called for it but not
for any integrated GPU found later.  Therefore, stolen memory for such an
integrated GPU was never reserved.

For example, this problem occurs in this Alderlake-P (integrated) + DG2
(discrete) topology where the DG2 is found first, but stolen memory is
associated with the integrated GPU:

  - 00:01.0 Bridge
    `- 03:00.0 DG2 discrete GPU
  - 00:02.0 Integrated GPU (with stolen memory)

Remove the QFLAG_APPLY_ONCE flag and call intel_graphics_quirks() for every
Intel GPU.  Reserve stolen memory for the first GPU that appears in
intel_early_ids[].

[bhelgaas: commit log, add code comment, squash in
https://lore.kernel.org/r/20220118190558.2ququ4vdfjuahicm@ldmartin-desk2]
Link: https://lore.kernel.org/r/20220114002843.2083382-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: fix wrong phys_ram_base value for RV64

commit b0fd4b1bf995172b9efcee23600d4f69571c321c upstream.

Currently, if 64BIT and !XIP_KERNEL, the phys_ram_base is always 0,
no matter the real start of dram reported by memblock is.

Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: use hart id instead of cpu id on machine_kexec

commit 0e105f1d0037d677dff3c697d22f9551e6c39af8 upstream.

raw_smp_processor_id() doesn't return the hart id as stated in
arch/riscv/include/asm/smp.h, use smp_processor_id() instead
to get the cpu id, and cpuid_to_hartid_map() to pass the hart id
to the next kernel. This fixes kexec on HiFive Unleashed/Unmatched
where cpu ids and hart ids don't match (on qemu-virt they match).

Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Don't use va_pa_offset on kdump

commit a11c07f032a0e9a562a32ece73af96b0e754c4b3 upstream.

On kdump instead of using an intermediate step to relocate the kernel,
that lives in a "control buffer" outside the current kernel's mapping,
we jump to the crash kernel directly by calling riscv_kexec_norelocate().
The current implementation uses va_pa_offset while switching to physical
addressing, however since we moved the kernel outside the linear mapping
this won't work anymore since riscv_kexec_norelocate() is part of the
kernel mapping and we should use kernel_map.va_kernel_pa_offset, and also
take XIP kernel into account.

We don't really need to use va_pa_offset on riscv_kexec_norelocate, we
can just set STVEC to the physical address of the new kernel instead and
let the hart jump to the new kernel on the next instruction after setting
SATP to zero. This fixes kdump and is also simpler/cleaner.

I tested this on the latest qemu and HiFive Unmatched and works as
expected.

Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: try to allocate crashkern region from 32bit addressible memory

commit decf89f86ecd3c3c3de81c562010d5797bea3de1 upstream.

When allocating crash kernel region without explicitly specifying its
base address/size, memblock_phys_alloc_range will attempt to allocate
memory top to bottom (memblock.bottom_up is false), so the crash
kernel region will end up in highmem on 64bit systems. This way
swiotlb can't work on the crash kernel, since there won't be any
32bit addressible memory available for the bounce buffers.

Try to allocate 32bit addressible memory if available, for the
crash kernel by restricting the top search address to be less
than SZ_4G. If that fails fallback to the previous behavior.

I tested this on HiFive Unmatched where the pci-e controller needs
swiotlb to work, with this patch it's possible to access the pci-e
controller on crash kernel and mount the rootfs from the nvme.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Fixes: e53d28180d4d ("RISC-V: Add kdump support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n

commit 869c70609248102f3a2e95a39b6233ff6ea2c932 upstream.

Use what is currently the SMP=y version of riscv_cpuid_to_hartid_mask()
for both SMP=y and SMP=n to fix a build failure with KVM=m and SMP=n due
to boot_cpu_hartid not being exported.  This also fixes a second bug
where the SMP=n version assumes the sole CPU in the system is in the
incoming mask, which may not hold true in kvm_riscv_vcpu_sbi_ecall() if
the KVM guest VM has multiple vCPUs (on a SMP=n system).

Fixes: 1ef46c231df4 ("RISC-V: Implement new SBI v0.2 extensions")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Get rid of MAXPHYSMEM configs

commit db1503d355a79d1d4255a9996f20e72848b74a56 upstream.

CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.

In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: ingenic: JZ4740 needs 'oob_first' read page function

commit 0171480007d64f663aae9226303f1b1e4621229e upstream.

The ECC engine on the JZ4740 SoC requires the ECC data to be read before
the page; using the default page reading function does not work. Indeed,
the old JZ4740 NAND driver (removed in 5.4) did use the 'OOB first' flag
that existed back then.

Use the newly created nand_read_page_hwecc_oob_first() to address this
issue.

This issue was not found when the new ingenic-nand driver was developed,
most likely because the Device Tree used had the nand-ecc-mode set to
"hw_oob_first", which seems to not be supported anymore.

Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: Export nand_read_page_hwecc_oob_first()

commit d8466f73010faf71effb21228ae1cbf577dab130 upstream.

Move the function nand_read_page_hwecc_oob_first() (previously
nand_davinci_read_page_hwecc_oob_first()) to nand_base.c, and export it
as a GPL symbol, so that it can be used by more modules.

Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-4-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: davinci: Rewrite function description

commit 0697f8441faad552fbeb02d74454b5e7bcc956a2 upstream.

The original comment that describes the function
nand_davinci_read_page_hwecc_oob_first() is very obscure and it is hard
to understand what it is for.

Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-3-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: davinci: Avoid duplicated page read

commit 9c9d709965385de5a99f84b14bd5860e1541729e upstream.

The function nand_davinci_read_page_hwecc_oob_first() first reads the
OOB data, extracts the ECC information, programs the ECC hardware before
reading the actual data in a loop.

Right after the OOB data was read, it called nand_read_page_op() to
reset the read cursor to the beginning of the page. This caused the
first page to be read twice: in that call, and later in the loop.

Address that issue by changing the call to nand_read_page_op() to
nand_change_read_column_op(), which will only reset the read cursor.

Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: davinci: Don't calculate ECC when reading page

commit 71e89591502d737c10db2bd4d8fcfaa352552afb upstream.

The function nand_davinci_read_page_hwecc_oob_first() does read the ECC
data from the OOB area. Therefore it does not need to calculate the ECC
as it is already available.

Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: Fixed breaking list in __mtd_del_partition.

commit 2966daf7d253d9904b337b040dd7a43472858b8a upstream.

Not the child partition should be removed from the partition list
but the partition itself. Otherwise the partition list gets broken
and any subsequent remove operations leads to a kernel panic.

Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102172604.2921065-1-andreas.oetken@siemens-energy.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6

commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.

There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings

commit f53d4c109a666bf1a4883b45d546fba079258717 upstream.

gpmi_io clock needs to be gated off when changing the parent/dividers of
enfc_clk_root (i.MX6Q/i.MX6UL) respectively qspi2_clk_root (i.MX6SX).
Otherwise this rate change can lead to an unresponsive GPMI core which
results in DMA timeouts and failed driver probe:

[    4.072318] gpmi-nand 112000.gpmi-nand: DMA timeout, last DMA
...
[    4.370355] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -110
...
[    4.375988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[    4.381524] gpmi-nand 112000.gpmi-nand: Error in ECC-based read: -22
[    4.387988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[    4.393535] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
...

Other than stated in i.MX 6 erratum ERR007117, it should be sufficient
to gate only gpmi_io because all other bch/nand clocks are derived from
different clock roots.

The i.MX6 reference manuals state that changing clock muxers can cause
glitches but are silent about changing dividers. But tests showed that
these glitches can definitely happen on i.MX6ULL. For i.MX7D/8MM in turn,
the manual guarantees that no glitches can happen when changing
dividers.

Co-developed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-2-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()

commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream.

Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.

KASAN report:

  BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
  Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899

  CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x59
   ? nfc_alloc_send_skb+0x2d/0xc0
   __kasan_report.cold+0x117/0x11c
   ? mark_lock+0x480/0x4f0
   ? nfc_alloc_send_skb+0x2d/0xc0
   kasan_report+0x38/0x50
   nfc_alloc_send_skb+0x2d/0xc0
   nfc_llcp_send_ui_frame+0x18c/0x2a0
   ? nfc_llcp_send_i_frame+0x230/0x230
   ? __local_bh_enable_ip+0x86/0xe0
   ? llcp_sock_connect+0x470/0x470
   ? llcp_sock_connect+0x470/0x470
   sock_sendmsg+0x8e/0xa0
   ____sys_sendmsg+0x253/0x3f0
   ...

The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail.  The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields).  When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.

The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind().  The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().

Therefore the race could look like (same socket is used all the time):
  CPU0                                     CPU1
  ====                                     ====
  llcp_sock_bind()
  - lock_sock()
    - success
  - release_sock()
  - return 0
                                           llcp_sock_sendmsg()
                                           - lock_sock()
                                           - release_sock()
  llcp_sock_bind(), same socket
  - lock_sock()
    - error
                                           - nfc_llcp_send_ui_frame()
                                             - if (!llcp_sock->local)
    - llcp_sock->local = NULL
    - nfc_put_device(dev)
                                             - dereference llcp_sock->dev
  - release_sock()
  - return -ERRNO

The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check.  Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().

Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file

commit 19bdba5265624ba6b9d9dd936a0c6ccc167cfe80 upstream.

Android OTA failed due to SBI_NEED_FSCK flag when pinning the file. Let's avoid
it since we can do in-place-updates.

Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check in is_alive()

commit 77900c45ee5cd5da63bd4d818a41dbdf367e81cd upstream.

In fuzzed image, SSA table may indicate that a data block belongs to
invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
order to avoid migrating inconsistent data in such corrupted image,
let's do sanity check anyway before data block migration.

Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on inode type during garbage collection

commit 9056d6489f5a41cfbb67f719d2c0ce61ead72d9f upstream.

As report by Wenqing Liu in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=215231

- Overview
kernel NULL pointer dereference triggered  in folio_mark_dirty() when mount and operate on a crafted f2fs image

- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root

1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
4. cp tmp mnt

F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix.
BUG: kernel NULL pointer dereference, address: 0000000000000000
 folio_mark_dirty+0x33/0x50
 move_data_page+0x2dd/0x460 [f2fs]
 do_garbage_collect+0xc18/0x16a0 [f2fs]
 f2fs_gc+0x1d3/0xd90 [f2fs]
 f2fs_balance_fs+0x13a/0x570 [f2fs]
 f2fs_create+0x285/0x840 [f2fs]
 path_openat+0xe6d/0x1040
 do_filp_open+0xc5/0x140
 do_sys_openat2+0x23a/0x310
 do_sys_open+0x57/0x80

The root cause is for special file: e.g. character, block, fifo or socket file,
f2fs doesn't assign address space operations pointer array for mapping->a_ops field,
so, in a fuzzed image, SSA table indicates a data block belong to special file, when
f2fs tries to migrate that block, it causes NULL pointer access once move_data_page()
calls a_ops->set_dirty_page().

Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: core: Fix SSID quirk lookup for subvendor=0

commit 5576c4f24c56722a2d9fb9c447d896e5b312078b upstream.

Some weird devices set the codec SSID vendor ID 0, and
snd_pci_quirk_lookup_id() loop aborts at the point although it should
still try matching with the SSID device ID.  This resulted in a
missing quirk for some old Macs.

Fix the loop termination condition to check both subvendor and
subdevice.

Fixes: 73355ddd8775 ("ALSA: hda: Code refactoring snd_hda_pick_fixup()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495
Link: https://lore.kernel.org/r/20220116082838.19382-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Avoid using stale array indicies to read contact count

commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.

If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.

This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.

Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Ignore the confidence flag when a touch is removed

commit df03e9bd6d4806619b4cdc91a3d7695818a8e2b7 upstream.

AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.

This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Reset expected and received contact counts at the same time

commit 546e41ac994cc185ef3de610ca849a294b5df3ba upstream.

These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.

Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: uhid: Fix worker destroying device without any protection

commit 4ea5763fb79ed89b3bdad455ebf3f33416a81624 upstream.

uhid has to run hid_add_device() from workqueue context while allowing
parallel use of the userspace API (which is protected with ->devlock).
But hid_add_device() can fail. Currently, that is handled by immediately
destroying the associated HID device, without using ->devlock - but if
there are concurrent requests from userspace, that's wrong and leads to
NULL dereferences and/or memory corruption (via use-after-free).

Fix it by leaving the HID device as-is in the worker. We can clean it up
later, either in the UHID_DESTROY command handler or in the ->release()
handler.

Cc: stable@vger.kernel.org
Fixes: 67f8ecc550b5 ("HID: uhid: fix timeout when probe races with IO")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Ignore battery for Elan touchscreen on HP Envy X360 15t-dr100

commit f3193ea1b6779023334faa72b214ece457e02656 upstream.

Battery status on Elan tablet driver is reported for the HP ENVY x360
15t-dr100. There is no separate battery for the Elan controller resulting in a
battery level report of 0% or 1% depending on whether a stylus has interacted
with the screen. These low battery level reports causes a variety of bad
behavior in desktop environments. This patch adds the appropriate quirk to
indicate that the batery status is unused for this target.

Cc: stable@vger.kernel.org
Signed-off-by: Karl Kurbjun <kkurbjun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: switch blocked_vcpu_on_cpu_lock to raw spinlock

commit 5f02ef741a785678930f3ff0a8b6b2b0ef1bb402 upstream.

blocked_vcpu_on_cpu_lock is taken from hard interrupt context
(pi_wakeup_handler), therefore it cannot sleep.

Switch it to a raw spinlock.

Fixes:

[41297.066254] BUG: scheduling while atomic: CPU 0/KVM/635218/0x00010001
[41297.066323] Preemption disabled at:
[41297.066324] [<ffffffff902ee47f>] irq_enter_rcu+0xf/0x60
[41297.066339] Call Trace:
[41297.066342]  <IRQ>
[41297.066346]  dump_stack_lvl+0x34/0x44
[41297.066353]  ? irq_enter_rcu+0xf/0x60
[41297.066356]  __schedule_bug.cold+0x7d/0x8b
[41297.066361]  __schedule+0x439/0x5b0
[41297.066365]  ? task_blocks_on_rt_mutex.constprop.0.isra.0+0x1b0/0x440
[41297.066369]  schedule_rtlock+0x1e/0x40
[41297.066371]  rtlock_slowlock_locked+0xf1/0x260
[41297.066374]  rt_spin_lock+0x3b/0x60
[41297.066378]  pi_wakeup_handler+0x31/0x90 [kvm_intel]
[41297.066388]  sysvec_kvm_posted_intr_wakeup_ipi+0x9d/0xd0
[41297.066392]  </IRQ>
[41297.066392]  asm_sysvec_kvm_posted_intr_wakeup_ipi+0x12/0x20
...

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Fix write-protection of PTs mapped by the TDP MMU

commit 7c8a4742c4abe205ec9daf416c9d42fd6b406e8e upstream.

When the TDP MMU is write-protection GFNs for page table protection (as
opposed to for dirty logging, or due to the HVA not being writable), it
checks if the SPTE is already write-protected and if so skips modifying
the SPTE and the TLB flush.

This behavior is incorrect because it fails to check if the SPTE
is write-protected for page table protection, i.e. fails to check
that MMU-writable is '0'.  If the SPTE was write-protected for dirty
logging but not page table protection, the SPTE could locklessly be made
writable, and vCPUs could still be running with writable mappings cached
in their TLB.

Fix this by only skipping setting the SPTE if the SPTE is already
write-protected *and* MMU-writable is already clear.  Technically,
checking only MMU-writable would suffice; a SPTE cannot be writable
without MMU-writable being set.  But check both to be paranoid and
because it arguably yields more readable code.

Fixes: 46044f72c382 ("kvm: x86/mmu: Support write protection for nesting in tdp MMU")
Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220113233020.3986005-2-dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.16

Link: https://lore.kernel.org/r/20220118160451.879092022@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: fixup CFI on ixp4xx

commit 603362b4a58393061dcfed1c7f0d0fd4aba61126 upstream.

drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set
in order to compile.

drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required

This patch avoids the #error output by enforcing the policy in
Kconfig. Not sure if this is the right approach, but it helps doing
randconfig builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org
Cc: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Re-order quirk entries for Lenovo

commit 2aac550da3257ab46e8c7944365eb4a79ccbb3a1 upstream.

The recent few quirk entries for Lenovo haven't been put in the right
order.  Let's arrange the table again.

Fixes: ad7cc2d41b7a ("ALSA: hda/realtek: Quirks to enable speaker output...")
Fixes: 6dc86976220c ("ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices")
Fixes: 8f4c90427a8f ("ALSA: hda/realtek: Add quirk for Legion Y9000X 2020")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Legion Y9000X 2020

commit 8f4c90427a8f0ca0fcdd89d8966fcdab35fb2d4c upstream.

Legion Y9000X 2020 has a speaker, but the speaker doesn't work.
This can be fixed by applying alc285_fixup_ideapad_s740_coef
to fix the speaker's coefficients.
Besides, to support the transition between the speaker and the headphone,
alc287_fixup_legion_15imhg05_speakers needs to be run.

Signed-off-by: Baole Fang <fbl718@163.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220105140856.4855-1-fbl718@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tegra: Fix Tegra194 HDA reset failure

commit d278dc9151a034674b31ffeda24cdfb0073570f3 upstream.

HDA regression is recently reported on Tegra194 based platforms.
This happens because "hda2codec_2x" reset does not really exist
in Tegra194 and it causes probe failure. All the HDA based audio
tests fail at the moment. This underlying issue is exposed by
commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP
response") which now checks return code of BPMP command response.
Fix this issue by skipping unavailable reset on Tegra194.

Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1640260431-11613-2-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: ALC287: Add Lenovo IdeaPad Slim 9i 14ITL5 speaker quirk

commit b81e9e5c723de936652653241d3dc4f33ae05e8c upstream.

The speaker fixup that is used for the Yoga 7 14ITL5 also applies to
the IdeaPad Slim 9i 14ITL5. The attached patch applies the quirk to
initialise the amplifier on the IdeaPad Slim 9i as well.

This is validated to work on my laptop.

[ corrected the quirk entry position by tiwai ]

Signed-off-by: Bart Kroon <bart@tarmack.eu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/JAG24R.7NLJGWBF4G8U@tarmack.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows

commit c1933008679586b20437280463110c967d66f865 upstream.

This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.

It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.

We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.

This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.

I tested this patch on the 5.15 branch as well as on master and it is
working well for me.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Fixes: 0d45e86d2267d ("ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220103140517.30273-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Use ALC285_FIXUP_HP_GPIO_LED on another HP laptop

commit 08977fe8cfb7d9fe9337470eec4843081cf3a76d upstream.

The audio mute and mic mute LEDs don't work, so use the quirk to make
them work.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211224035015.310068-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices

commit 6dc86976220cc904e87ee58e4be19dd90d6a36d5 upstream.

This patch adds another possible subsystem ID for the ALC287 used by
the Lenovo Yoga 15ITL5.
It uses the same initalization as the others.
This patch has been tested and works for my device.

Signed-off-by: Arie Geiger <arsgeiger@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211223232857.30741-1-arsgeiger@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all

commit 9fb12fe5b93b94b9e607509ba461e17f4cc6a264 upstream.

The fixed counter 3 is used for the Topdown metrics, which hasn't been
enabled for KVM guests. Userspace accessing to it will fail as it's not
included in get_fixed_pmc(). This breaks KVM selftests on ICX+ machines,
which have this counter.

To reproduce it on ICX+ machines, ./state_test reports:
==== Test Assertion Failure ====
lib/x86_64/processor.c:1078: r == nmsrs
pid=4564 tid=4564 - Argument list too long
1  0x000000000040b1b9: vcpu_save_state at processor.c:1077
2  0x0000000000402478: main at state_test.c:209 (discriminator 6)
3  0x00007fbe21ed5f92: ?? ??:0
4  0x000000000040264d: _start at ??:?
 Unexpected result from KVM_GET_MSRS, r: 17 (failed MSR was 0x30c)

With this patch, it works well.

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <20211217124934.32893-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: e2ada66ec418 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf annotate: Avoid TUI crash when navigating in the annotation of recursive functions

commit d5962fb7d69073bf68fb647531cfd4f0adf84be3 upstream.

In 'perf report', entering a recursive function from inside of itself
(either directly of indirectly through some other function) results in
calling symbol__annotate2 multiple() times, and freeing the whole
disassembly when exiting from the innermost instance.

The first issue causes the function's disassembly to be duplicated, and
the latter a heap use-after-free (and crash) when trying to access the
disassembly again.

I reproduced the bug on perf 5.11.22 (Ubuntu 20.04.3 LTS) and 5.16.rc8
with the following testcase (compile with gcc recursive.c -o recursive).
To reproduce:

- perf record ./recursive
- perf report
- enter fibonacci and annotate it
- move the cursor on one of the "callq fibonacci" instructions and press enter
  - at this point there will be two copies of the function in the disassembly
- go back by pressing q, and perf will crash

  #include <stdio.h>

  int fibonacci(int n)
  {
      if(n <= 2) return 1;
      return fibonacci(n-1) + fibonacci(n-2);
  }

  int main()
  {
      printf("%d\n", fibonacci(40));
  }

This patch addresses the issue by annotating a function and freeing the
associated memory on exit only if no annotation is already present, so
that a recursive function is only annotated on entry.

Signed-off-by: Dario Petrillo <dario.pk1@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20220109234441.325106-1-dario.pk1@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qemu_fw_cfg: fix kobject leak in probe error path

commit 47a1db8e797da01a1309bf42e0c0d771d4e4d4f3 upstream.

An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).

Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.

Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().

Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entries

commit d3e305592d69e21e36b76d24ca3c01971a2d09be upstream.

Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
a kobject leak in the file registration helper by properly calling
kobject_put() for the entry in case registration of the object fails
(e.g. due to a name collision).

This would however result in a NULL pointer dereference when the
release function tries to remove the never added entry from the
fw_cfg_entry_cache list.

Fix this by moving the list-removal out of the release function.

Note that the offending commit was one of the benign looking umn.edu
fixes which was reviewed but not reverted. [1][2]

[1] https://lore.kernel.org/r/202105051005.49BFABCE@keescook
[2] https://lore.kernel.org/all/YIg7ZOZvS3a8LjSv@kroah.com

Fixes: fe3c60684377 ("firmware: Fix a reference count leak.")
Cc: stable@vger.kernel.org # 5.8
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-2-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qemu_fw_cfg: fix sysfs information leak

commit 1b656e9aad7f4886ed466094d1dc5ee4dd900d20 upstream.

Make sure to always NUL-terminate file names retrieved from the firmware
to avoid accessing data beyond the entry slab buffer and exposing it
through sysfs in case the firmware data is corrupt.

Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-4-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled

commit 8b144dedb928e4e2f433a328d58f44c3c098d63e upstream.

Syzbot reports the following WARNING:

[200~raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10
   warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10

Hardware initialization for the rtl8188cu can run for as long as 350 ms,
and the routine may be called with interrupts disabled. To avoid locking
the machine for this long, the current routine saves the interrupt flags
and enables local interrupts. The problem is that it restores the flags
at the end without disabling local interrupts first.

This patch fixes commit a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long
disable of IRQs").

Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>