Miquel van Smoorenburg [Thu, 1 May 2008 23:08:19 +0000 (01:08 +0200)]
[SCSI] dpt_i2o: sysfs code
Create a /sys/class/dpt_i2o directory and populate it with
dptiN directories. Each dptiN directory contains a "dev" file
that makes udev create /dev/dptiN
Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Miquel van Smoorenburg [Thu, 1 May 2008 23:07:27 +0000 (01:07 +0200)]
[SCSI] dpt_i2o: 64 bit support
This is the code to actually support 64 bit platforms. 64 bit
DMA is enabled on both x86_32 PAE and 64 bit platforms.
This code is based in part on the unofficial adaptec 64-bit
dpt_i2o driver update that I got from Mark Salyzyn at Adaptec.
Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Miquel van Smoorenburg [Thu, 1 May 2008 23:06:39 +0000 (01:06 +0200)]
[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent
Remove virt_to_bus/bus_to_virt code from dpt_i2o, and use
dma_alloc_coherent() / dma_free_coherent().
This is in preparation of 64-bit support, dma_alloc_coherent()
can allocate memory in the lower 32 bits of physical memory
which is needed because the HBA only supports message blocks under 4GB
This code is based in part on the unofficial adaptec 64-bit
dpt_i2o driver update that I got from Mark Salyzyn at Adaptec.
Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Miquel van Smoorenburg [Thu, 1 May 2008 23:05:33 +0000 (01:05 +0200)]
[SCSI] dpt_i2o: use standard __init / __exit code
Update dpt_i2o.c to use the standard __init / __exit
code instead of the legacy '#include "scsi_module.c"' code.
This is needed in preparation of 64-bit support. scsi_module.c
calls scsi_add_host() with the device pointer set to NULL, and that
crashes code like arch/x64/kernel/pci-gart_64.c::need_iommu().
The reboot_notifier code is deleted because it wasn't compiled
in ever anyway, and it would be useless to duplicate it in
the new code.
Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Jiri Slaby [Thu, 1 May 2008 15:56:02 +0000 (17:56 +0200)]
[SCSI] megaraid_sas: fix suspend/resume sections
megaraid_sas suspend and resume are inappropriatelly placed in
__devinit section. Remove those placements and make the stuff
dependent on CONFIG_PM.
While at it, mark remove function as __devexit.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: "Yang, Bo" <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Mark Salyzyn [Wed, 30 Apr 2008 20:03:42 +0000 (16:03 -0400)]
[SCSI] aacraid: Add Power Management support
For firmware that supports the feature(s), add the ability to start or
stop an array using the associated SCSI commands, to automatically
manage the spin-up of an array on new I/O reporting back the
appropriate check conditions and actions in cooperation with the
normal timeout mechanisms and enable the blackout period management in
the Firmware associated with the background spin-down of the arrays
when the Firmware times out and deems the arrays as idle.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Mark Salyzyn [Wed, 30 Apr 2008 19:47:35 +0000 (15:47 -0400)]
[SCSI] aacraid: Fix jbod operations scan issues
As JBOD devices (really just Simple Single Drive Volumes exported to
the SCSI channel) are managed, they fail to update correctly when the
driver triggers a SCSI scan. In addition, the ability to change
multiple arrays or JBODs at the same time was resulting in dropped
scans, set up a mechanism to issue a list of single target scans on a
single configuration change notification from the Firmware.
Performed some additional sundry cosmetic code style cleanups.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Mark Salyzyn [Wed, 30 Apr 2008 19:28:32 +0000 (15:28 -0400)]
[SCSI] aacraid: Fix warning about macro side-effects
On some compile environments, warnings are produced regarding the
usage of aac_logical_to_phys macro.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Boaz Harrosh [Wed, 30 Apr 2008 08:27:26 +0000 (11:27 +0300)]
[SCSI] add support for variable length extended commands
Add support for variable-length, extended, and vendor specific
CDBs to scsi-ml. It is now possible for initiators and ULD's
to issue these types of commands. LLDs need not change much.
All they need is to raise the .max_cmd_len to the longest command
they support (see iscsi patch).
- clean-up some code paths that did not expect commands to be
larger than 16, and change cmd_len members' type to short as
char is not enough.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Boaz Harrosh [Wed, 30 Apr 2008 08:19:47 +0000 (11:19 +0300)]
[SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
- struct scsi_cmnd had a 16 bytes command buffer of its own.
This is an unnecessary duplication and copy of request's
cmd. It is probably left overs from the time that scsi_cmnd
could function without a request attached. So clean that up.
- Once above is done, few places, apart from scsi-ml, needed
adjustments due to changing the data type of scsi_cmnd->cmnd.
- Lots of drivers still use MAX_COMMAND_SIZE. So I have left
that #define but equate it to BLK_MAX_CDB. The way I see it
and is reflected in the patch below is.
MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB
as per the SCSI standard and is not related
to the implementation.
BLK_MAX_CDB. - The allocated space at the request level
- I have audit all ISA drivers and made sure none use ->cmnd in a DMA
Operation. Same audit was done by Andi Kleen.
(*)fixed-length here means commands that their size can be determined
by their opcode and the CDB does not carry a length specifier, (unlike
the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
true and the SCSI standard also defines extended commands and
vendor specific commands that can be bigger than 16 bytes. The kernel
will support these using the same infrastructure used for VARLEN CDB's.
So in effect MAX_COMMAND_SIZE means the maximum size command
scsi-ml supports without specifying a cmd_len by ULD's
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
FUJITA Tomonori [Wed, 30 Apr 2008 04:16:21 +0000 (13:16 +0900)]
[SCSI] bsg: add large command support
This enables bsg to handle the request length larger than BLK_MAX_CDB
(mainly for the variable length CDB format).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Mark Salyzyn [Wed, 23 Apr 2008 12:16:06 +0000 (08:16 -0400)]
[SCSI] aacraid: Fix down_interruptible() to check the return value correctly
On Apr 21, 2008, at 8:42 PM, Yinghai Lu wrote:
> bisected to:
>
> commit
e6990c6448ca9359b6d4ad027c0a6efbf4379e64
> Author: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
> Date: Mon Apr 14 14:20:16 2008 -0400
>
> [SCSI] aacraid: Fix down_interruptible() to check the return value
The return value for down_interruptible was incorrectly checked!
updated patch enclosed.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
bo yang [Tue, 29 Apr 2008 07:55:33 +0000 (03:55 -0400)]
[SCSI] megaraid_sas; Update the Version and Changelog
Update the Version and Changelog for megaraid_sas Driver
Signed-off-by: Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Fri, 25 Apr 2008 21:58:29 +0000 (16:58 -0500)]
[SCSI] ibmvscsi: Handle non SCSI error status
Adds support to the ibmvscsi driver to handle non SCSI error
status. This is needed to support some new VIOS enhancements.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Alan D. Brunelle [Tue, 29 Apr 2008 20:12:51 +0000 (16:12 -0400)]
[SCSI] bug fix for free list handling
commit:
commit
542bd1377a963070bc4a03ff7d2690ddf3920596
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Mon Apr 21 10:57:20 2008 -0500
[SCSI] fix SLUB WARN_ON
Fixed another problem in free list handling by moving list allocation
from scsi_host_alloc() to scsi_add_host(). Unfortunately it
introduced a new failure mode in that hosts can pass straight from
alloc to put without going through add, leaving the free list
uninitialised.
Fix by checking shost->cmd_pool on the release path to see if it got
initialised.
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Mon, 28 Apr 2008 22:36:20 +0000 (17:36 -0500)]
[SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions
Due to recent device model changes it now no longer tolerates name
collisions. This causes a problem for ipr whose "state" attribute
collides with an identically named one in the SCSI mid-layer. Rename
the ipr driver attribute to be more specific.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Fri, 18 Apr 2008 20:57:20 +0000 (13:57 -0700)]
[SCSI] megaraid_mbox: fix Dell CERC firmware problem
Newer Dell CERC firmware (>= 6.62) implement a random deletion handling
compatible with the legacy megaraid driver. The legacy handling shifted
the target ID by 0x80 only for I/O commands (READ/WRITE/etc), whereas
megaraid_mbox shifts the target ID always if random deletion is supported.
The resulted in megaraid_mbox sending an INQUIRY to the wrong channel, and
not finding any devices, obviously.
So we disable the random deletion support if the offending firmware is
found.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=6695
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: "Yang, Bo" <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Linus Torvalds [Sun, 27 Apr 2008 18:25:00 +0000 (11:25 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
[SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug
[SCSI] aic7xxx: add const
[SCSI] aic7xxx: add static
[SCSI] aic7xxx: Update _shipped files
[SCSI] aic7xxx: teach aicasm to not emit unused debug code/data
[SCSI] qla2xxx: Update version number to 8.02.01-k2.
[SCSI] qla2xxx: Correct regression in relogin code.
[SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.
[SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static
[SCSI] qla2xxx: qla_os.c, make 2 functions static
[SCSI] qla2xxx: Re-register FDMI information after a LIP.
[SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.
[SCSI] qla2xxx: Correct ISP84XX verify-chip response handling.
[SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests.
[SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump.
[SCSI] m68k: new mac_esp scsi driver
[SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs
[SCSI] zfcp: Print some messages only during ERP
[SCSI] zfcp: Wait for free SBAL during exchange config
[SCSI] scsi_transport_fc: fc_user_scan correction
...
Kay Sievers [Fri, 18 Apr 2008 20:57:19 +0000 (13:57 -0700)]
[SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug
Since
commit
43cc71eed1250755986da4c0f9898f9a635cb3bf
Author: Kay Sievers <kay.sievers@vrfy.org>
Date: Sat Aug 18 04:40:39 2007 +0200
platform: prefix MODALIAS with "platform:"
the platform modalias is prefixed with "platform:". Add MODULE_ALIAS()
to the hotpluggable SCSI platform drivers, to re-enable auto loading.
[dbrownell@users.sourceforge.net: more drivers, registration fixes]
[akpm@linux-foundation.org: fix sgiwd93.c]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Denys Vlasenko [Fri, 25 Apr 2008 02:36:01 +0000 (04:36 +0200)]
[SCSI] aic7xxx: add const
This patch adds more const keywords where appropriate.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Denys Vlasenko [Fri, 25 Apr 2008 02:34:49 +0000 (04:34 +0200)]
[SCSI] aic7xxx: add static
This patch adds static (and sometimes const) keywords where appropriate.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Fri, 25 Apr 2008 13:03:05 +0000 (15:03 +0200)]
[SCSI] aic7xxx: Update _shipped files
Update the precompiled sequencer code to match the latest
aicasm changes.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Fri, 25 Apr 2008 13:01:41 +0000 (15:01 +0200)]
[SCSI] aic7xxx: teach aicasm to not emit unused debug code/data
Add a 'count' variable to each symbol which gets increased every time
the symbol is referenced. And then modify the register definition to
include counts for symbols which are referenced from the source code
only and not from the sequencer code.
This will give us an automatic usage count for the symbols with only
minimal hand-crafting.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:31 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Update version number to 8.02.01-k2.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:30 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Correct regression in relogin code.
Commit
63a8651f2548c6bb5132c0b4e7dad4f57a9274db ([SCSI] qla2xxx:
Correct infinite-login-retry issue.) introduced a small
regression where a successful relogin would result in an fcport's
loop_id to be incorrectly reset to FC_NO_LOOP_ID. Only clear-out
loopid, if retries have been 'truly' exhausted.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Seokmann Ju [Thu, 24 Apr 2008 22:21:29 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.
There were several places in the driver which could cause byte
ordering problem as provided by Al Viro
<viro@ZenIV.linux.org.uk>.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Adrian Bunk [Thu, 24 Apr 2008 22:21:28 +0000 (15:21 -0700)]
[SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static
This patch makes the needlessly global qla2x00_issue_iocb_timeout()
static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Adrian Bunk [Thu, 24 Apr 2008 22:21:27 +0000 (15:21 -0700)]
[SCSI] qla2xxx: qla_os.c, make 2 functions static
This patch makes the following needlessly global functions static:
- qla2x00_alloc_work()
- qla2x00_post_work()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:26 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Re-register FDMI information after a LIP.
Original code would (incorrectly) only re-register after a
loop-down condition. Also, FDMI registration should be enabled
by default.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:25 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.
The driver is incorrectly assuming that the 'sp' reference held
in qla2[x00|4xx]_abort_command() is valid after the mailbox
command is issued to abort the exchange. It is *not*, as the
command may be completed during interrupt context before control
is returned to the mailbox caller.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:24 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Correct ISP84XX verify-chip response handling.
Earlier code could trigger an infinite-retry if 1st invocation
returned a non-CS_COMPLETE status.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:23 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Thu, 24 Apr 2008 22:21:22 +0000 (15:21 -0700)]
[SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump.
Use the more efficient read-DMA'ble-buffer mailbox commands
rather than reading a single word/dword at a time. We also
remove a bulk of the duplicate mailbox command-handling codes in
favor of more generic read-memory() routines (qla2xxx_dump_ram()
and qla24xx_dump_ram()).
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Finn Thain [Fri, 25 Apr 2008 15:06:05 +0000 (10:06 -0500)]
[SCSI] m68k: new mac_esp scsi driver
Replace the mac_esp driver with a new one based on the esp_scsi core.
For esp_scsi: add support for sync transfers for the PIO mode, add a new
esp_driver_ops method to get the maximum dma transfer size (like the old
NCR53C9x driver), and some cleanups.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Swen Schillig [Thu, 24 Apr 2008 17:35:54 +0000 (19:35 +0200)]
[SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs
The new FCP adapter statistics provide a variety of information about
the virtual adapter (subchannel). In order to collect this information
the zfcp driver is extended to query this information.
The information provided by the new FCP adapter statistics can be
fetched by reading from the following files in the sysfs filesystem
/sys/class/scsi_host/host<n>/seconds_active
/sys/class/scsi_host/host<n>/requests
/sys/class/scsi_host/host<n>/megabytes
/sys/class/scsi_host/host<n>/utilization
These are the statistics on a virtual adapter (subchannel) level.
The information provided is raw and not modified or interpreted by any
means. No interpretation or modification of the values is done by the
zfcp driver.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Swen Schillig [Thu, 24 Apr 2008 17:35:53 +0000 (19:35 +0200)]
[SCSI] zfcp: Print some messages only during ERP
When statistics are polled from sysfs, the statistics use the same
commands as the adapter initialization. Change the messages printed
here, so they are only printed during initialization and not for each
poll of adapter data.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Swen Schillig [Thu, 24 Apr 2008 17:35:52 +0000 (19:35 +0200)]
[SCSI] zfcp: Wait for free SBAL during exchange config
When sending a exchange config data command, wait for a free SBAL.
This does not matter during adapter initialization, but this is
required for pulling adapter statistics during high I/O load.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Smart [Thu, 24 Apr 2008 16:12:46 +0000 (12:12 -0400)]
[SCSI] scsi_transport_fc: fc_user_scan correction
Way back when, when the fc_user_scan routine was created, it kept some
of its original logic that walked the rport list and kicked off a scan.
Unfortunately, it didn't keep any of the locking around the rport list,
nor did it consider the synchronous nature of the scan invoked. The result,
there are some scan requests where the rport list changes, thus a subsequent
scan is called on a bogus rport structure and the system NMI's.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Jeff Garzik [Thu, 24 Apr 2008 23:45:32 +0000 (19:45 -0400)]
[SCSI] aha1542: minor irq handler cleanups
- where the 'irq' function argument is known never to be used, rename
it to 'dummy' to make this more obvious
- replace per-irq lookup functions and tables with a direct reference
to data object obtained via 'dev_id' function argument, passed from
request_irq()
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Randy Dunlap [Wed, 23 Apr 2008 16:56:14 +0000 (09:56 -0700)]
[SCSI] scsi_transport_spi: include sysfs.h
scsi_transport_spi.c needs to #include <linux/sysfs.h>:
next-
20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group'
make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Adrian Bunk [Wed, 23 Apr 2008 09:51:10 +0000 (12:51 +0300)]
[SCSI] FlashPoint: fix off-by-one errors
This patch fixes off-by-one errors in error checks (the variables are
used as array indexes for arrays with MAX_SCSI_TAR resp. MAX_LUN
elements) spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Wed, 23 Apr 2008 09:39:49 +0000 (11:39 +0200)]
[SCSI] aic7xxx: Update type check in aicasm grammar
The function type_check() in aicasm grammar code was
never used properly due to a bug.
This patch fixes it up and ensures it's only called if appropriate.
In addition the unused 16bit instruction are disabled, but left in
the code for reference.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Mon, 21 Apr 2008 15:57:20 +0000 (10:57 -0500)]
[SCSI] fix SLUB WARN_ON
We're getting a WARN_ON from SLUB indicating that we're trying to free
caches with in-use objects. The root cause is a new dependency in the
command/sense free on unchecked_isa_dma. The WARN_ON is caused by
drivers which change this in their setup after the command/sense cache
is allocated.
The fix is to move the allocation of this cache into scsi_add_host()
so things like gdth have an opportunity to modify it between alloc and
add (but *not* after).
The true fix would be to move unchecked_isa_dma into the template and
out of the host, so it because a truly read only variable.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Linus Torvalds [Sun, 27 Apr 2008 17:13:52 +0000 (10:13 -0700)]
Merge branch 'kvm-updates-2.6.26' of git://git./linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (147 commits)
KVM: kill file->f_count abuse in kvm
KVM: MMU: kvm_pv_mmu_op should not take mmap_sem
KVM: SVM: remove selective CR0 comment
KVM: SVM: remove now obsolete FIXME comment
KVM: SVM: disable CR8 intercept when tpr is not masking interrupts
KVM: SVM: sync V_TPR with LAPIC.TPR if CR8 write intercept is disabled
KVM: export kvm_lapic_set_tpr() to modules
KVM: SVM: sync TPR value to V_TPR field in the VMCB
KVM: ppc: PowerPC 440 KVM implementation
KVM: Add MAINTAINERS entry for PowerPC KVM
KVM: ppc: Add DCR access information to struct kvm_run
ppc: Export tlb_44x_hwater for KVM
KVM: Rename debugfs_dir to kvm_debugfs_dir
KVM: x86 emulator: fix lea to really get the effective address
KVM: x86 emulator: fix smsw and lmsw with a memory operand
KVM: x86 emulator: initialize src.val and dst.val for register operands
KVM: SVM: force a new asid when initializing the vmcb
KVM: fix kvm_vcpu_kick vs __vcpu_run race
KVM: add ioctls to save/store mpstate
KVM: Rename VCPU_MP_STATE_* to KVM_MP_STATE_*
...
Linus Torvalds [Sun, 27 Apr 2008 17:13:06 +0000 (10:13 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (49 commits)
ide-tape: remove tape->merge_stage
ide-tape: mv tape->merge_stage_size tape->merge_bh_size
ide-tape: mv idetape_empty_write_pipeline ide_tape_flush_merge_buffer
ide-tape: mv idetape_discard_read_pipeline ide_tape_discard_merge_buffer
ide-tape: make __idetape_discard_read_pipeline() of type void
ide: remove now unused ide_pci_create_host_proc()
ide: remove /proc/ide/ali
ide-tape: improve buffer pages freeing strategy
ide-tape: mv tape->pages_per_stage tape->pages_per_buffer
ide-tape: mv tape->stage_size tape->buffer_size
ide-tape: improve buffer allocation strategy
ide: add struct ide_io_ports (take 3)
ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2)
ide: sanitize ide_unregister() usage
mpc8xx-ide: use ide_find_port()
ide: add "noacpi" / "acpigtf" / "acpionboot" parameters
gayle: add "doubler" parameter
ide: add "cdrom=" and "chs=" parameters
ide: add "nodma|noflush|noprobe|nowerr=" parameters
ide: remove obsoleted "hdx=autotune" kernel parameter
...
Linus Torvalds [Sun, 27 Apr 2008 17:10:54 +0000 (10:10 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/x86/linux-2.6-idle-fix
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-idle-fix:
fix idle (arch, acpi and apm) and lockdep
Linus Torvalds [Sun, 27 Apr 2008 17:10:37 +0000 (10:10 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix build failure
Linus Torvalds [Sun, 27 Apr 2008 17:10:14 +0000 (10:10 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
mlx4_core: Add helper to move QP to ready-to-send
mlx4_core: Add HW queues allocation helpers
RDMA/nes: Remove volatile qualifier from struct nes_hw_cq.cq_vbase
mlx4_core: CQ resizing should pass a 0 opcode modifier to MODIFY_CQ
mlx4_core: Move kernel doorbell management into core
IB/ehca: Bump version number to 0026
IB/ehca: Make some module parameters bool, update descriptions
IB/ehca: Remove mr_largepage parameter
IB/ehca: Move high-volume debug output to higher debug levels
IB/ehca: Prevent posting of SQ WQEs if QP not in RTS
IPoIB: Handle 4K IB MTU for UD (datagram) mode
RDMA/nes: Fix adapter reset after PXE boot
RDMA/nes: Print IPv4 addresses in a readable format
RDMA/nes: Use print_mac() to format ethernet addresses for printing
Al Viro [Sun, 27 Apr 2008 05:19:18 +0000 (06:19 +0100)]
asm/unaligned.h doesn't work well as the very first include
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 27 Apr 2008 05:15:42 +0000 (06:15 +0100)]
e1000e triggers sparc32 gcc bug
... and isn't possible on sparc32 boxen anyway, unless somebody
had done JavaStation with PCIE lately.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 19 Apr 2008 19:33:56 +0000 (20:33 +0100)]
KVM: kill file->f_count abuse in kvm
Use kvm own refcounting instead of playing with ->filp->f_count.
That will allow to get rid of a lot of crap in anon_inode_getfd() and
kill a race in kvm_dev_ioctl_create_vm() (file might have been closed
immediately by another thread, so ->filp might point to already freed
struct file when we get around to setting it).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Marcelo Tosatti [Wed, 16 Apr 2008 20:19:06 +0000 (17:19 -0300)]
KVM: MMU: kvm_pv_mmu_op should not take mmap_sem
kvm_pv_mmu_op should not take mmap_sem. All gfn_to_page() callers down
in the MMU processing will take it if necessary, so as it is it can
deadlock.
Apparently a leftover from the days before slots_lock.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Joerg Roedel [Wed, 16 Apr 2008 15:01:05 +0000 (17:01 +0200)]
KVM: SVM: remove selective CR0 comment
There is not selective cr0 intercept bug. The code in the comment sets the
CR0.PG bit. But KVM sets the CR4.PG bit for SVM always to implement the paged
real mode. So the 'mov %eax,%cr0' instruction does not change the CR0.PG bit.
Selective CR0 intercepts only occur when a bit is actually changed. So its the
right behavior that there is no intercept on this instruction.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Joerg Roedel [Wed, 16 Apr 2008 14:51:19 +0000 (16:51 +0200)]
KVM: SVM: remove now obsolete FIXME comment
With the usage of the V_TPR field this comment is now obsolete.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Joerg Roedel [Wed, 16 Apr 2008 14:51:18 +0000 (16:51 +0200)]
KVM: SVM: disable CR8 intercept when tpr is not masking interrupts
This patch disables the intercept of CR8 writes if the TPR is not masking
interrupts. This reduces the total number CR8 intercepts to below 1 percent of
what we have without this patch using Windows 64 bit guests.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Joerg Roedel [Wed, 16 Apr 2008 14:51:17 +0000 (16:51 +0200)]
KVM: SVM: sync V_TPR with LAPIC.TPR if CR8 write intercept is disabled
If the CR8 write intercept is disabled the V_TPR field of the VMCB needs to be
synced with the TPR field in the local apic.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Joerg Roedel [Wed, 16 Apr 2008 14:51:16 +0000 (16:51 +0200)]
KVM: export kvm_lapic_set_tpr() to modules
This patch exports the kvm_lapic_set_tpr() function from the lapic code to
modules. It is required in the kvm-amd module to optimize CR8 intercepts.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Joerg Roedel [Wed, 16 Apr 2008 14:51:15 +0000 (16:51 +0200)]
KVM: SVM: sync TPR value to V_TPR field in the VMCB
This patch adds syncing of the lapic.tpr field to the V_TPR field of the VMCB.
With this change we can safely remove the CR8 read intercept.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Hollis Blanchard [Thu, 17 Apr 2008 04:28:09 +0000 (23:28 -0500)]
KVM: ppc: PowerPC 440 KVM implementation
This functionality is definitely experimental, but is capable of running
unmodified PowerPC 440 Linux kernels as guests on a PowerPC 440 host. (Only
tested with 440EP "Bamboo" guests so far, but with appropriate userspace
support other SoC/board combinations should work.)
See Documentation/powerpc/kvm_440.txt for technical details.
[stephen: build fix]
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Hollis Blanchard [Thu, 17 Apr 2008 04:28:08 +0000 (23:28 -0500)]
KVM: Add MAINTAINERS entry for PowerPC KVM
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Hollis Blanchard [Thu, 17 Apr 2008 04:28:07 +0000 (23:28 -0500)]
KVM: ppc: Add DCR access information to struct kvm_run
Device Control Registers are essentially another address space found on PowerPC
4xx processors, analogous to PIO on x86. DCRs are always 32 bits, and can be
identified by a 32-bit number. We forward most DCR accesses to userspace for
emulation (with the exception of CPR0 registers, which can be read directly
for simplicity in timebase frequency determination).
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Hollis Blanchard [Thu, 17 Apr 2008 04:28:06 +0000 (23:28 -0500)]
ppc: Export tlb_44x_hwater for KVM
PowerPC 440 KVM needs to know how many TLB entries are used for the host kernel
linear mapping (it does not modify these mappings when switching between guest
and host execution).
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Hollis Blanchard [Tue, 15 Apr 2008 21:05:42 +0000 (16:05 -0500)]
KVM: Rename debugfs_dir to kvm_debugfs_dir
It's a globally exported symbol now.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Avi Kivity [Mon, 14 Apr 2008 20:46:37 +0000 (23:46 +0300)]
KVM: x86 emulator: fix lea to really get the effective address
We never hit this, since there is currently no reason to emulate lea.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Avi Kivity [Mon, 14 Apr 2008 11:40:50 +0000 (14:40 +0300)]
KVM: x86 emulator: fix smsw and lmsw with a memory operand
lmsw and smsw were implemented only with a register operand. Extend them
to support a memory operand as well. Fixes Windows running some display
compatibility test on AMD hosts.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Avi Kivity [Mon, 14 Apr 2008 20:27:07 +0000 (23:27 +0300)]
KVM: x86 emulator: initialize src.val and dst.val for register operands
This lets us treat the case where mod == 3 in the same manner as other cases.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Avi Kivity [Mon, 14 Apr 2008 10:10:21 +0000 (13:10 +0300)]
KVM: SVM: force a new asid when initializing the vmcb
Shutdown interception clears the vmcb, leaving the asid at zero (which is
illegal. so force a new asid on vmcb initialization.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Marcelo Tosatti [Fri, 11 Apr 2008 18:01:22 +0000 (15:01 -0300)]
KVM: fix kvm_vcpu_kick vs __vcpu_run race
There is a window open between testing of pending IRQ's
and assignment of guest_mode in __vcpu_run.
Injection of IRQ's can race with __vcpu_run as follows:
CPU0 CPU1
kvm_x86_ops->run()
vcpu->guest_mode = 0 SET_IRQ_LINE ioctl
..
kvm_x86_ops->inject_pending_irq
kvm_cpu_has_interrupt()
apic_test_and_set_irr()
kvm_vcpu_kick
if (vcpu->guest_mode)
send_ipi()
vcpu->guest_mode = 1
So move guest_mode=1 assignment before ->inject_pending_irq, and make
sure that it won't reorder after it.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Marcelo Tosatti [Fri, 11 Apr 2008 16:24:45 +0000 (13:24 -0300)]
KVM: add ioctls to save/store mpstate
So userspace can save/restore the mpstate during migration.
[avi: export the #define constants describing the value]
[christian: add s390 stubs]
[avi: ditto for ia64]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
David S. Miller [Sat, 19 Apr 2008 14:16:38 +0000 (09:16 -0500)]
[SCSI] esp_scsi: Make cur_residue and tot_residue signed.
Many of the overflow checks test whether the value has
gone negative, and we want to retain such checks.
Reported by Julia Lawall.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:34 +0000 (15:38 +0200)]
ide-tape: remove tape->merge_stage
Get rid of the pipeline merge stage but retain the chrdev req caching
functionality by using a merge buffer tape->merge_bh which is flushed in chunks
of several blocks at a time. Also, remove last references to pipelining, e.g.
typedef idetape_stage_s.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:34 +0000 (15:38 +0200)]
ide-tape: mv tape->merge_stage_size tape->merge_bh_size
This is the size of the merge buffer.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:34 +0000 (15:38 +0200)]
ide-tape: mv idetape_empty_write_pipeline ide_tape_flush_merge_buffer
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:34 +0000 (15:38 +0200)]
ide-tape: mv idetape_discard_read_pipeline ide_tape_discard_merge_buffer
Also, rename its __-low level helper too.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:34 +0000 (15:38 +0200)]
ide-tape: make __idetape_discard_read_pipeline() of type void
It always returns 0 which has no effect on tape positioning calculation so
simplify it by converting its type to void, bringing no functional change to the
driver.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Alexey Dobriyan [Sun, 27 Apr 2008 13:38:34 +0000 (15:38 +0200)]
ide: remove now unused ide_pci_create_host_proc()
It creates files in proc with obsoleted ->get_info interface.
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Alexey Dobriyan [Sun, 27 Apr 2008 13:38:33 +0000 (15:38 +0200)]
ide: remove /proc/ide/ali
Bart says: "can be done from user-space and is not especially interesting
even when debugging problems (raw PCI config space dump is far more useful)."
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:33 +0000 (15:38 +0200)]
ide-tape: improve buffer pages freeing strategy
Instead of freeing pages one by one, free them 2^order-wise. Also, mv
__idetape_kfree_stage() to ide_tape_kfree_buffer().
[bart: add updating bh->b_data]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:33 +0000 (15:38 +0200)]
ide-tape: mv tape->pages_per_stage tape->pages_per_buffer
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:33 +0000 (15:38 +0200)]
ide-tape: mv tape->stage_size tape->buffer_size
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:32 +0000 (15:38 +0200)]
ide-tape: improve buffer allocation strategy
Instead of allocating pages for the buffer one by one, take advantage of the
buddy alloc system and request them 2^order at a time. This increases the chance
for bigger buffer parts to be contigious and reduces loop iteration count. While
at it, rename function __idetape_kmalloc_stage() to ide_tape_kmalloc_buffer().
[bart: fold with "ide-tape: fix mem leak" patch to preserve bisectability]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:32 +0000 (15:38 +0200)]
ide: add struct ide_io_ports (take 3)
* Add struct ide_io_ports and use it instead of `unsigned long io_ports[]`
in ide_hwif_t.
* Rename io_ports[] in hw_regs_t to io_ports_array[].
* Use un-named union for 'unsigned long io_ports_array[]' and 'struct
ide_io_ports io_ports' in hw_regs_t.
* Remove IDE_*_OFFSET defines.
v2:
* scc_pata.c build fix from Stephen Rothwell.
v3:
* Fix ctl_adrr typo in Sparc-specific part of ns87415.c.
(Noticed by Andrew Morton)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:31 +0000 (15:38 +0200)]
ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2)
* Make ide_unregister() take 'ide_hwif_t *hwif' instead of 'unsigned int
index' (hwif->index) as an argument and update all users accordingly.
While at it:
* Remove unnecessary checks for hwif != NULL from ide-pnp.c::idepnp_remove()
and delkin_cb.c::delkin_cb_remove().
* Remove needless hwif->chipset assignment from scc_pata.c::scc_remove().
v2:
* Fixup ide_unregister() documentation.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:31 +0000 (15:38 +0200)]
ide: sanitize ide_unregister() usage
* Remove ide_unregister() call from ide_exit()
(host drivers take care of unregistering hwif-s themselves).
* Remove ide_unregister() call from probe methods of
bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers
(ide_find_port() returns only free ide_hwifs[] entries).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:30 +0000 (15:38 +0200)]
mpc8xx-ide: use ide_find_port()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:30 +0000 (15:38 +0200)]
ide: add "noacpi" / "acpigtf" / "acpionboot" parameters
* Rename ide_noacpi{tfs,onboot} to ide_acpi{gtf,onboot} (+ reverse logic).
* Move ide_*acpi* variables to ide-acpi.c and remove unnecessary initializers.
* Add "noacpi" / "acpigtf" / "acpionboot" parameters.
* Obsolete "ide=noacpi" / "ide=acpigtf" / "ide=acpionboot" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:30 +0000 (15:38 +0200)]
gayle: add "doubler" parameter
* Add "doubler" parameter to enable support for IDE doublers.
* Obsolete "ide=doubler" kernel parameter.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:30 +0000 (15:38 +0200)]
ide: add "cdrom=" and "chs=" parameters
* Add "cdrom=" and "chs=" parameters.
* Obsolete "hdx=cdrom" and "hdx=cyls,heads,sects" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:30 +0000 (15:38 +0200)]
ide: add "nodma|noflush|noprobe|nowerr=" parameters
* Add "nodma|noflush|noprobe|nowerr=" parameters.
* Obsolete "hdx=noprobe|none|nowerr|nodma|noflush" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:29 +0000 (15:38 +0200)]
ide: remove obsoleted "hdx=autotune" kernel parameter
* Remove obsoleted "hdx=autotune" kernel parameter
(we always auto-tune PIO if possible nowadays).
* Remove no longer needed ide_drive_t.autotune flag.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:29 +0000 (15:38 +0200)]
ide: remove IDE_HFLAG_NO_AUTOTUNE host flag
* Don't set IDE_HFLAG_NO_AUTOTUNE host flag in sgiioc4 and icside
host drivers - there is no need for it as they don't implement
->set_pio_mode method.
* Remove no longer needed IDE_HFLAG_NO_AUTOTUNE host flag.
There should be no functional changes caused by this patch.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:29 +0000 (15:38 +0200)]
cmd640: always auto-tune PIO
* Default to tuning PIO0 and disabling prefetch prior to probing
devices for CONFIG_BLK_DEV_CMD640_ENHANCED=y case.
* Always auto-tune PIO.
* Remove no longer used retrieve_drive_counts().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:29 +0000 (15:38 +0200)]
ide: always auto-tune PIO in legacy VLB host drivers
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:29 +0000 (15:38 +0200)]
ide: mark "idebus=" kernel parameter as obsoleted (take 2)
We have "vlb|pci_clock=" parameters now.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Sun, 27 Apr 2008 13:38:29 +0000 (15:38 +0200)]
ide: add "vlb|pci_clock=" parameter
* Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz).
* Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz).
While at it:
* qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc.
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:28 +0000 (15:38 +0200)]
ide-tape: remove comments markup from Documentation/ide/ide-tape.txt
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:28 +0000 (15:38 +0200)]
ide-tape: remove pipelined mode description from Documentation/ide/ide-tape.txt
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:28 +0000 (15:38 +0200)]
ide-tape: remove misc references to pipelined operation in the comments
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:28 +0000 (15:38 +0200)]
ide-tape: remove pipelined mode parameters
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Sun, 27 Apr 2008 13:38:27 +0000 (15:38 +0200)]
ide-tape: remove pipeline-specific members from struct ide_tape_obj
Bart:
- merge "ide-tape: remove pipeline-specific code from idetape_setup" patch
- cleanup __idetape_discard_read_pipeline()
- cleanup idetape_empty_write_pipeline()
- fix 't' assignment in idetape_setup()
- fix idetape_blkdev_ioctl() w.r.t. 'nr_stages'
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
projects / kernel / kernel-generic.git / log