João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:58 +0000 (19:45 -0300)]
cli-command: Use pa_module_exists() in .ifexists
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:57 +0000 (19:45 -0300)]
module: Create pa_module_exists()
This new function checks if a certain module name is available in the
system.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:56 +0000 (19:45 -0300)]
bluetooth: Fail to load driver if discovery module is not loaded
For quite some time now the device driver module doesn't work well
without the discovery module, so for the BlueZ 5 support we'll prevent
the device driver module to be loaded if the discovery module is not
loaded.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:55 +0000 (19:45 -0300)]
bluetooth: Implement get_n_used() for module-bluez5-device
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:54 +0000 (19:45 -0300)]
bluetooth: Handle changes to BlueZ 5 transports state
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:53 +0000 (19:45 -0300)]
bluetooth: Process source messages for BlueZ 5 cards
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:52 +0000 (19:45 -0300)]
bluetooth: Process sink messages for BlueZ 5 cards
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:51 +0000 (19:45 -0300)]
bluetooth: Create I/O thread function for BlueZ 5 cards
Create the thread function, the render and push functions for A2DP, the
process message function for communication between the I/O thread and
the main thread, and other helper functions related to them.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:50 +0000 (19:45 -0300)]
bluetooth: Set card profile for BlueZ 5 cards
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:49 +0000 (19:45 -0300)]
bluetooth: Start / stop I/O thread for BlueZ 5 cards
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:48 +0000 (19:45 -0300)]
bluetooth: Create source for BlueZ 5 cards
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:47 +0000 (19:45 -0300)]
bluetooth: Create sink for BlueZ 5 cards
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:46 +0000 (19:45 -0300)]
bluetooth: Initialize profiles for BlueZ 5 cards
Initialized the currently active profile, configure and acquire the
transport.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:45 +0000 (19:45 -0300)]
bluetooth: Create BlueZ 5 card profile for each audio UUID
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:44 +0000 (19:45 -0300)]
bluetooth: Create BlueZ 5 card ports
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:43 +0000 (19:45 -0300)]
bluetooth: Create BlueZ 5 card
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:42 +0000 (19:45 -0300)]
bluetooth: Unload module-bluez5-device on device's disconnection
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:41 +0000 (19:45 -0300)]
bluetooth: Get BlueZ 5 device object
Get the remote device information stored in pa_bluetooth_discovery. This
also creates the mandatory parameter 'path' for module-bluez5-device,
which is used to inform the object path of the remote device in BlueZ on
the module load.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:40 +0000 (19:45 -0300)]
bluetooth: Create module-bluez5-device
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:39 +0000 (19:45 -0300)]
bluetooth: Track devices in module-bluez5-discover
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:38 +0000 (19:45 -0300)]
bluetooth: Handle PropertiesChanged for org.bluez.MediaTransport1
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:37 +0000 (19:45 -0300)]
bluetooth: Handle PropertiesChanged for org.bluez.Device1
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:36 +0000 (19:45 -0300)]
bluetooth: Protect from a misbehaving bluetoothd
bluetoothd always send the GetManagedObjects() reply messages with the
objects array argument following an in-depth order starting from the
root. That means parents will always be known at the time their children
objects are parsed, if clients parse the objects in the same order they
appear in the array, as we do in PulseAudio.
This commit tries to protect PulseAudio in the case bluetoothd changes
that behavior for some reason. It hasn't been tested, since this
situation never occurs.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:35 +0000 (19:45 -0300)]
bluetooth: Parse BlueZ 5 device properties
This code is based on previous work by Mikel Astiz.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:34 +0000 (19:45 -0300)]
bluetooth: Handle PropertiesChanged for org.bluez.Adapter1
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:33 +0000 (19:45 -0300)]
bluetooth: Register endpoints with BlueZ 5 adapter
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:32 +0000 (19:45 -0300)]
bluetooth: Parse BlueZ 5 adapter properties
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:31 +0000 (19:45 -0300)]
bluetooth: Parse BlueZ 5 D-Bus interfaces
Parse the arguments of the InterfacesAdded signal and the
GetManagedObjects() reply.
This code is based on previous work by Mikel Astiz.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:30 +0000 (19:45 -0300)]
bluetooth: Handle InterfacesAdded and InterfacesRemoved
This code is based on previous work by Mikel Astiz.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:29 +0000 (19:45 -0300)]
bluetooth: Create a function to remove only one adapter object
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:28 +0000 (19:45 -0300)]
bluetooth: Get managed objects
Get objects from the BlueZ 5 object manager. This code is based on
previous work by Mikel Astiz.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:27 +0000 (19:45 -0300)]
bluetooth: Add utility function to send D-Bus messages with reply
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:26 +0000 (19:45 -0300)]
bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:25 +0000 (19:45 -0300)]
bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:24 +0000 (19:45 -0300)]
bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:23 +0000 (19:45 -0300)]
bluetooth: Register MediaEndpoint1 objects with D-Bus
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:22 +0000 (19:45 -0300)]
bluetooth: Create pa_bluetooth_transport for BlueZ 5 support
Create the pa_bluetooth_transport structure to store information about
the bluetooth transport and utility functions to manipulate this
structure. The acquire() and release() operations are function pointers
in the pa_bluetooth_transport structure to make possible for different
transport backends to provide different implementations of these
operations. Thre is also a userdata field for the transport backend
provide data for the acquire/release functions.
This commit also creates a new function
pa_bluetooth_device_any_transport_connected() to check if there is any
audio connection between the host and a remote device.
João Paulo Rechi Vita [Tue, 24 Sep 2013 22:45:21 +0000 (19:45 -0300)]
bluetooth: Remove all devices and adapters when org.bluez goes away
João Paulo Rechi Vita [Wed, 18 Sep 2013 21:16:58 +0000 (16:16 -0500)]
bluetooth: Create pa_bluetooth_device for BlueZ 5 support
Create a structure pa_bluetooth_device to store information about the
bluetooth device and utility functions to manipulate this structure.
João Paulo Rechi Vita [Wed, 18 Sep 2013 21:16:57 +0000 (16:16 -0500)]
bluetooth: Create pa_bluetooth_adapter for BlueZ 5 support
João Paulo Rechi Vita [Wed, 18 Sep 2013 21:16:56 +0000 (16:16 -0500)]
bluetooth: Create infrastrucure for bluetooth hooks
Create a pa_bluetooth_hook enum type and API to get pa_hooks from the
opaque pa_bluetooth_discovery struct.
João Paulo Rechi Vita [Wed, 18 Sep 2013 21:16:55 +0000 (16:16 -0500)]
bluetooth: Track org.bluez for BlueZ 5
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:54:00 +0000 (01:54 -0300)]
bluetooth: Create pa_bluetooth_discovery for BlueZ 5
pa_bluetooth_discovery is the struct that holds information about known
Bluetooth audio devices and other information about the Bluetooth stack.
This commit also creates bluez5-util.[ch], which will hold a lot of
utility functions to help with the BlueZ 5 support.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:59 +0000 (01:53 -0300)]
bluetooth: Create stub for module-bluez5-discover
João Paulo Rechi Vita [Fri, 16 Aug 2013 12:40:54 +0000 (09:40 -0300)]
build: Add support for enabling/disabling BlueZ 5 support
João Paulo Rechi Vita [Fri, 16 Aug 2013 12:31:45 +0000 (09:31 -0300)]
build: Make the build of bluetooth modules BlueZ 4 specific
João Paulo Rechi Vita [Fri, 16 Aug 2013 12:30:41 +0000 (09:30 -0300)]
bluetooth: Remove module-bluetooth-proximity
module-bluetooth-proximity has not worked for quite a while, since it
uses pre-BlueZ4 APIs. Nobody complained since then, which is a good
indication that it doesn't have much users. Even the original commit
message refers to it more as a toy than as something of great use: "add
new fun module that automatically mutes your audio devices when you
leave with your bluetooth phone, and unmutes when you come back"
Removing it we completely remove the dependency on libbluetooth.
João Paulo Rechi Vita [Thu, 15 Aug 2013 19:17:26 +0000 (16:17 -0300)]
bluetooth: Prefix BlueZ 4 card profiles enum with PA_BLUEZ4_
Also typedef the enum as pa_bluez4_profile_t.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:55 +0000 (01:53 -0300)]
bluetooth: Register BlueZ 4 endpoints in a separate object path
We need diferent object paths for BlueZ 4 and BlueZ 5 endpoints to avoid
crashing the daemon in the case both modules are loaded in parallel.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:54 +0000 (01:53 -0300)]
bluetooth: Name BlueZ 4 symbols accordingly
We need diferent symbol prefixing for the current BlueZ 4 support and
the new BlueZ 5 support which is about to enter the codebase, to avoid
symbol clashing and crashing the daemon in the case both modules are
loaded at the same time.
This commit replaces all pa_bluetooth_ and pa_bt_ (for consistency)
prefixes with pa_bluez4_, for both lower-case and upper-case, what was
done with the following sed commands:
$ sed -i s/pa_bluetooth_/pa_bluez4_/g src/modules/bluetooth/*bluez4*
$ sed -i s/PA_BLUETOOTH_/PA_BLUEZ4_/g src/modules/bluetooth/*bluez4*
$ sed -i s/pa_bt_/pa_bluez4_/g src/modules/bluetooth/*bluez4*
$ sed -i s/PA_BT_/PA_BLUEZ4_/g src/modules/bluetooth/*bluez4*
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:53 +0000 (01:53 -0300)]
bluetooth: Rename shared struct to make it BlueZ 4 specific
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:52 +0000 (01:53 -0300)]
bluetooth: Rename bluetooth modules to BlueZ 4
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:51 +0000 (01:53 -0300)]
bluetooth: Update modules description and copyright
The current set of bluetooth modules only support up to BlueZ 4. Since
the BlueZ API when through a big change with the release of BlueZ 5 the
modules will be forked into a new set for BlueZ 5.
This commit also fixes the spelling of Bluetooth (it's a trademark which
should always be spelled with capital B) and the spelling of my name,
and also update the copyright note dates throughout the Bluetooth
modules.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:50 +0000 (01:53 -0300)]
Revert "bluetooth: Detect BlueZ 5"
This reverts commit
2247b187393ef68879162faee8b422da9f5e556f.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:49 +0000 (01:53 -0300)]
Revert "bluetooth: Parse the tree returned by ObjectManager"
This reverts commit
c4bd51a34547ed0991ff3c7219c2d5de49669ca8.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:48 +0000 (01:53 -0300)]
Revert "bluetooth: Fix error checking style"
This reverts commit
d9ed42c40f744b273c8d466e95dd4a06e41364b9.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:47 +0000 (01:53 -0300)]
Revert "bluetooth: BlueZ 5 interface rename to org.bluez.MediaEndpoint1"
This reverts commit
d22ea7ff7630bef83a3bf8c26cc56c196dec33a1.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:46 +0000 (01:53 -0300)]
Revert "bluetooth: BlueZ 5 interface rename to org.bluez.Media1"
This reverts commit
61e8fd8854308cb2d41e6313f25ae7131c912ea8.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:45 +0000 (01:53 -0300)]
Revert "bluetooth: BlueZ 5 interface rename to org.bluez.MediaTransport1"
This reverts commit
cfb96b2530690df113e1aceb5b82fc166f9d2cfd.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:44 +0000 (01:53 -0300)]
Revert "bluetooth: Support ObjectManager interface add/remove"
This reverts commit
114edb0696ce979ad10f5616067afda1b76ae4e2.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:43 +0000 (01:53 -0300)]
Revert "bluetooth: Support Properties.PropertiesChanged signal"
This reverts commit
235611a7d13ab251689f5b480183d7f39e043a2e.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:42 +0000 (01:53 -0300)]
Revert "bluetooth: Parse media transport's properties"
This reverts commit
2f79fb580ad583b2492b567d32630e7e03883855.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:41 +0000 (01:53 -0300)]
Revert "bluetooth: Support media transport's State property"
This reverts commit
6fdf2b05b8867d4597c497243b469ecd0d8c2426.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:40 +0000 (01:53 -0300)]
Revert "bluetooth: Update to new BlueZ 5 transport acquire/release API"
This reverts commit
9615def4b96f0bab365ddc03f6c003f382a54752.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
João Paulo Rechi Vita [Tue, 13 Aug 2013 04:53:39 +0000 (01:53 -0300)]
Revert "bluetooth: Support transport auto-release"
This reverts commit
0e4c16e120f95b122c7139deb046192927d1b6c7.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
Anton Lundin [Wed, 18 Sep 2013 14:20:42 +0000 (16:20 +0200)]
build-sys: Support building pulseaudio as a submodule
When pulseaudio is a submodule, .git is a file.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Arun Raghavan [Sat, 28 Sep 2013 03:42:01 +0000 (09:12 +0530)]
mutex: Fix compiler warning when priority inheritance is not supported
'r' is unused in the case where prioritiy inheritance is not detected at
configure time.
poljar (Damir Jelić) [Wed, 11 Sep 2013 20:47:24 +0000 (22:47 +0200)]
resampler: Revert to auto if the rates are equal and copy is chosen
This patch fixes a small mistake where we actually log that we are
reverting to the auto resampler if we can't use the 'copy' resampler but
never do the revert.
This would lead to a crash if the user chooses the 'copy' resampler and
then tries to play something that needs to be resampled.
David Henningsson [Mon, 23 Sep 2013 07:53:41 +0000 (09:53 +0200)]
alsa: Turn one assertion into two
According to coding style, one should have one assertion per line
and not combine assertions.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Arun Raghavan [Fri, 20 Sep 2013 03:42:51 +0000 (09:12 +0530)]
sink: Increase max sink inputs per sink
We're hitting the 32 sink-input limit quite often with increasing use of
PA by web browsers, so let's increase this limit.
Tanu Kaskinen [Thu, 19 Sep 2013 12:53:36 +0000 (15:53 +0300)]
.gitignore: Add .dirstamp
David Henningsson [Wed, 18 Sep 2013 13:07:37 +0000 (15:07 +0200)]
module-tunnel: Fixup broken build
A recent feature addition added a dependency on X11, but this
dependency was not specified in Makefile.am, leading to linker
errors.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Arun Raghavan [Tue, 17 Sep 2013 16:24:09 +0000 (21:54 +0530)]
log: Add missing header
sys/stat.h is required for permisison flags such as S_IRUSR.
Arun Raghavan [Tue, 17 Sep 2013 13:43:44 +0000 (19:13 +0530)]
build-sys: Fix warning in use-case.h configure check
AC_CHECK_HEADER uses cpp for header checks, so in order for the check to use
the right flags, we need to override CPPFLAGS and not CFLAGS.
poljar (Damir Jelić) [Mon, 16 Sep 2013 00:00:36 +0000 (02:00 +0200)]
build-sys: Update ax_pthread macro
This patch updates the ax_pthread autoconf macro to the latest version
shipped with autoconf-archive: 2013.06.09.13
This also silences multiple warnings on autoconf 2.68+:
configure.ac:471: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
poljar (Damir Jelić) [Mon, 16 Sep 2013 00:00:35 +0000 (02:00 +0200)]
build-sys: Silence warning about missing AC_LANG_SOURCE call in acx_libwrap.m4
This updates the acx_libwrap.m4 macro for autoconf 2.68 and fixes
warnings like:
configure.ac:471: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
poljar (Damir Jelić) [Mon, 16 Sep 2013 00:00:34 +0000 (02:00 +0200)]
build-sys: Silence warning about missing AC_LANG_SOURCE call in configure.ac
This silences multiple warnings like this on autoconf 2.68+:
configure.ac:471: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
poljar (Damir Jelić) [Mon, 16 Sep 2013 00:00:33 +0000 (02:00 +0200)]
build-sys: Enable subdir-objects option
Automake 1.14 throws a warning when source files are in a sub directory
and the 'subdir-objecs' option is not enabled.
News: https://lists.gnu.org/archive/html/automake/2013-06/msg00040.html
Arun Raghavan [Wed, 21 Aug 2013 09:28:06 +0000 (14:58 +0530)]
alsa-ucm: Make combination port names deterministic
At the moment, port names combined from multiple devices are generated
based on the order that the devices are specified in config. This makes
programmatic use of thsee ports a bit painful, so let's make them be
combined in alphabetical order.
Arun Raghavan [Wed, 7 Aug 2013 17:26:58 +0000 (22:56 +0530)]
alsa-ucm: Use playback/capture rate specification from UCM
Add new PlaybackRate/CaptureRate values for UCM that can be used to
specify custom rates for devices. This value can either be set on the
verb, which makes it apply to all devices, or on the device to override
the verb setting.
Arun Raghavan [Wed, 7 Aug 2013 12:56:26 +0000 (18:26 +0530)]
alsa: Allow sample spec override in mappings
This allows mappings to override some or all of the sample_spec used to
open the ALSA device. The intention, to start with, is to use this for
devices in UCM that need to be opened at a specific rate (like modem
devices). This can be extended to allow overrides in profile-sets as
well.
Arun Raghavan [Sat, 14 Sep 2013 06:20:10 +0000 (11:50 +0530)]
hashmap: Add the ability to free keys
Since the hashmap stores a pointer to the key provided at pa_hashmap_put()
time, it make sense to allow the hashmap to be given ownership of the key and
have it free it at pa_hashmap_remove/free time.
To do this cleanly, we now provide the key and value free functions at hashmap
creation time with a pa_hashmap_new_full. With this, we do away with the free
function that was provided at remove/free time for freeing the value.
Piotr Drąg [Fri, 13 Sep 2013 18:04:50 +0000 (20:04 +0200)]
i18n: remove unneeded files from POTFILES.in
Piotr Drąg [Fri, 13 Sep 2013 17:56:57 +0000 (19:56 +0200)]
i18n: add missing files to POTFILES.in
Piotr Drąg [Fri, 13 Sep 2013 17:55:14 +0000 (19:55 +0200)]
i18n: sort POTFILES.in alphabetically
Pierre Ossman [Thu, 11 Jul 2013 11:57:41 +0000 (13:57 +0200)]
module-tunnel: automatically find the PulseAudio server
Make the PulseAudio tunnel behave the same way as a client
when it comes to figuring out how to connect to the current
PulseAudio daemon. This can be useful if you start a second
PulseAudio instance for e.g. network access.
Tanu Kaskinen [Thu, 29 Aug 2013 14:36:53 +0000 (17:36 +0300)]
suspend-on-idle: Allow disabling suspending for specific devices
Sometimes it would be nice to disable module-suspend-on-idle for
specific devices. For me the use case is to keep a HDMI sink running
all the time to avoid loss of audio when starting to play a stream to
the device (the HDMI receiver eats a bit from the beginning of the
stream when the device is opened). This is arguably a hacky solution
to the problem, but on the other hand, I think it's very sensible to
interpret negative timeout in the module-suspend-on-idle.timeout
property as disabling the suspending altogher. This is also how the
exit-idle-time configuration option behaves (negative value disables
automatic exiting).
I moved the property parsing from the timer restart function to the
function that creates the device_info objects, because if the timeout
is negative, we don't need to create the device_info object at all.
Alexander Couzens [Thu, 12 Sep 2013 12:01:51 +0000 (14:01 +0200)]
tunnel-source-new: counterpart to module-tunnel-sink-new
The old tunnel module duplicates functionality that is in libpulse,
due to implementing the native protocol, and the protocol code in
the old tunnel module tends to get broken every now and then, because
people forget to update the tunnel module protocol implementation
when changing the native protocol. module-tunnel-source-new avoids this
problem by using libpulse to communicate with the remote server.
victory [Tue, 10 Sep 2013 06:10:03 +0000 (09:10 +0300)]
i18n: Japanese translation update
Tanu Kaskinen [Wed, 28 Aug 2013 11:11:54 +0000 (14:11 +0300)]
resampler: Never return zero for max block size
With very low input sample rates the memory pool max block size may
not be big enough, in which case we should return the size of one
frame. Returning zero caused crashing.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=68616
poljar (Damir Jelić) [Thu, 25 Jul 2013 14:39:01 +0000 (16:39 +0200)]
card-restore: Watch for profiles added after card creation.
This patch adds the ability to restore profiles if they are added after
card creation.
Adding profiles after card creation mainly happens for bluetooth cards.
Buglink: https://bugs.freedesktop.org/show_bug.cgi?id=65349
Alexander Couzens [Tue, 27 Aug 2013 01:18:35 +0000 (03:18 +0200)]
context: add pa_context_load_cookie_from_file()
There is no function to load the authentication cookie for a context.
You can only set environment variables. This patch adds
pa_context_load_cookie_from_file().
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Tanu Kaskinen [Fri, 23 Aug 2013 10:58:55 +0000 (13:58 +0300)]
sink, source: Fix error reporting style for rate updates
Tanu Kaskinen [Fri, 9 Aug 2013 06:39:49 +0000 (09:39 +0300)]
source: When updating a monitor source's rate, update the sink rate too
If the sink rate is not updated, then the monitor source will appear
to have a different rate than the sink, but in reality there's never
any resampling done when moving data from the sink to the monitor
source, so it's a lie that the monitor source has a different rate.
The result of lying is that clients that capture from the monitor
source will have streams that run too fast or slow.
Tanu Kaskinen [Fri, 9 Aug 2013 04:45:26 +0000 (07:45 +0300)]
source: Fix monitor source rate changing
When a sink changes its sample rate, also the monitor source rate
needs to be changed. In order to determine whether a source supports
rate changing, the code checks if the update_rate() callback is set,
but monitor sources don't have that callback set, so the old code
always failed to change the monitor source rate.
This patch fixes the monitor source rate changing by handling monitor
sources as a special case in pa_source_update_rate(): if the source is
a monitor source, then the update_rate() callback is not required.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=66424
poljar (Damir Jelić) [Wed, 7 Aug 2013 17:55:44 +0000 (19:55 +0200)]
resampler: Add a choose_auto_resampler function
This function returns our preferred resampler if the user choose the
auto (or if he has chosen an unsupported) resampler.
poljar (Damir Jelić) [Wed, 7 Aug 2013 17:37:55 +0000 (19:37 +0200)]
resampler: Get rid of redundant implementation specific structs
This patch removes implementation specific structs that contain a single
member.
poljar (Damir Jelić) [Wed, 10 Jul 2013 11:10:04 +0000 (13:10 +0200)]
resampler: Add assert to set_input/output_rate
This adds asserts to check if the implementation has an update rate
function defined for the unlikely event that some implementation forgets
to assign a update rate function we can simply bail.
It is expected from the resampling implementations to have such a
function even if the state of the resampler is completely reset.
poljar (Damir Jelić) [Mon, 24 Jun 2013 11:36:49 +0000 (13:36 +0200)]
resampler: Introduce a implementation specific struct
This struct holds all the implementation specific data in one place.
poljar (Damir Jelić) [Fri, 28 Jun 2013 16:55:04 +0000 (18:55 +0200)]
Resampler: Don't use the peaks resampler for upsampling
This patch fixes this assertion:
Assertion 'r->i_ss.rate >= r->o_ss.rate' failed at ../../src/pulsecore/resampler.c:1744, function peaks_init(). Aborting.