Yong Qin [Thu, 31 May 2018 11:53:09 +0000 (19:53 +0800)]
cec: add transwitch cec config [1/1]
PD#165002: cec: for support transwitch cec ip
Change-Id: I05ec182bbb1962a3a0b42702f87ff15e9de681b0
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Brian Zhu [Thu, 31 May 2018 08:07:36 +0000 (16:07 +0800)]
vpp: init vd1 pps dummy data as black
PD#166890: vpp: init vd1 pps dummy data as black
Change-Id: Id248bdcb201ada504776e7eefc4cf1d47ae1eeb3
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
rongrong zhou [Tue, 15 May 2018 05:46:08 +0000 (13:46 +0800)]
video: video not smooth issue
PD#163845 video: video not smooth issue
1. merge STARKPLAT-2290
[Problem]
When doing fast seek (Netflix swim) in secure non-tunneled
playback case, the PTS info for frames before seek can still
be sent from sf/hwc to display driver and mess up with the
time management for frames after seek, which caused frame
dropping at display driver due to a later PTS (from playback
before seek) is set as reference time.
[Solution]
Add a new meta data to mark the PTS record is for which playback
session so display driver can ignore any PTS set from previous
session.
2. kodi render first frame, then drop issue.
Change-Id: I0d91d7b1674a40ce58c0ebc20f820f3395704a51
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Yi Zhou [Thu, 24 May 2018 08:42:38 +0000 (16:42 +0800)]
hdmitx: add default edid in drm
PD#158474: hdmitx: add default edid in drm
Change-Id: Ia9faa12f00a5cd01550dea1f1fe136d99e697f87
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Kaifu Hu [Thu, 24 May 2018 10:48:14 +0000 (18:48 +0800)]
hdmitx: config DDC to 50kHz [4/4]
PD#167050: hdmitx: config DDC to 50kHz
Config DDC to 50kHz for HDMI2.0 CTS HF1-55.
HDMI Spec require that I2C timing shall
comply with the Standard Mode.
Change-Id: I3b3314b6df81089850a082c01e34175e3c2079d4
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Evoke Zhang [Wed, 23 May 2018 04:26:41 +0000 (12:26 +0800)]
backlight: ldim: optimize get config flow [2/3]
PD#166898: backlight: ldim: optimize get config flow
also correct local dimming spelling mistake
Change-Id: Iea2c7802e9fa55ad2e587126e1281ec9b34113e2
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
pengcheng chen [Tue, 29 May 2018 06:48:17 +0000 (14:48 +0800)]
osd: FBIO_WAITFORVSYNC expand to 64bit caused chrome crashed
PD#167080: osd: FBIO_WAITFORVSYNC expand to 64bit caused chrome crashed
1. used FBIO_WAITFORVSYNC and FBIO_WAITFORVSYNC_64
Change-Id: Ia4a457f876fad24c6d1df60f3ea1b5fdc7f6bd8a
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Jian Hu [Wed, 30 May 2018 05:39:59 +0000 (13:39 +0800)]
pwm: fix array out of bounds
PD#165090: pwm: fix array out of bounds
Change-Id: I5fbc06619cbbc04dc998ea68e4f4a23cdb2e20a0
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Bo Yang [Mon, 7 May 2018 11:34:44 +0000 (19:34 +0800)]
arm64: dts: add amlogic jtag support for g12a
PD#165810: add amlogic jtag support for g12a
Change-Id: I6f3fa717a54f027155c41496c50e2ffaae009c33
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Sunny Luo [Thu, 19 Apr 2018 07:04:56 +0000 (15:04 +0800)]
spicc: add enhanced features of oen, clock divider
PD#164751: spicc: add enhanced features of oen, clock divider
1. use the definite and significative name "has_oen" and
"has_enhance_clk_div" to replace the unclear "is_enhance".
2. add some comment about enhance clk divider.
Change-Id: I9ffe51aaf696cdb09b5e486d60b5378c6433783e
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Larson Jiang [Fri, 25 May 2018 10:01:02 +0000 (18:01 +0800)]
BT: fix bluetooth power issue for AP62X8
PD#166763: fix bluetooth power issue for AP62X8
Change-Id: I4cdf2e3af67a47908a55113cf05dd9fdffd1e0cd
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
tao zeng [Fri, 25 May 2018 13:19:25 +0000 (21:19 +0800)]
mm: optimize for cma free time
PD#165878: mm: optimize for cma free time
Fix bad parameter error and using high efficient free method.
Change-Id: I5fa1373644a373b3dd94775c5c29891f7f6f7420
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
wenfeng.guo [Wed, 16 May 2018 12:17:01 +0000 (20:17 +0800)]
vlock: adjust enc mode
PD#162336: vlock: adjust enc mode
1) separate vlock code from amve.c
2) optimize vlock default setting.
3) adjust enc mode
4) add manual enc soft adjust
Change-Id: Ie180c7fb6d9b1aa1fa016dd39bfa401197a5ac85
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Kaifu Hu [Mon, 28 May 2018 03:01:25 +0000 (11:01 +0800)]
hdmitx: fix VSDB block parsing error
PD#160588: hdmitx: fix VSDB parsing error
It cann't parse YUV format when using special
edid with support YUV.
Change-Id: Ic17e3b3dc1f26694252e608fa2e609d08578aa71
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Yue Wang [Tue, 29 May 2018 02:13:59 +0000 (10:13 +0800)]
usb: fix usb phy 1 reset bug.
PD#167234: usb: fix usb phy 1 reset bug.
Change-Id: Iac4c59a95f8a85553ac665e675a47f1a733cc1a8
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
binqi.zhang [Thu, 17 May 2018 10:54:44 +0000 (18:54 +0800)]
GEM: allocated buffer size must be PAGE_SIZE alignment
PD#158474: do PAGE_SIZE alignment before initializing gem object
Change-Id: I98723ed2a22cfdc279253e06725482a656535184
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
manhao liang [Thu, 24 May 2018 06:37:23 +0000 (14:37 +0800)]
frame_sync: optimize AV SYNC procession.
PD#165368: frame_sync: optimize AV SYNC procession.
Change-Id: Ib9f11c059b9c2985878f83f428cebc5f70bdd0fd
Signed-off-by: manhao liang <manhao.liang@amlogic.com>
Xing Wang [Mon, 28 May 2018 07:28:18 +0000 (15:28 +0800)]
Audio: dts: disable pwrdet
PD#167203: Disable pwrdet for u200
Change-Id: Ied661fe8f578ef7a60ff9a9dda82408ad13a77ba
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
nengwen.chen [Fri, 25 May 2018 10:49:40 +0000 (18:49 +0800)]
atv_demod: Modify atv v4l2 dev number
PD#166852: atv_demod: Modify atv v4l2 dev number.
Change-Id: I6dfa226715d5e3908a20add4c93f0ba554a769dc
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Evoke Zhang [Mon, 21 May 2018 06:25:07 +0000 (14:25 +0800)]
lcd: mipi-dsi: optimize retry_enable management [2/2]
PD#166330: lcd: mipi-dsi: optimize retry_enable management,
change mipi-dsi check_state after retry flow finished.
fix issue: mipi panel status is incorrect sometimes when lcd enable.
Change-Id: I5fc30f46589274b1cc2fda735c166779233ce1c2
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jihong Sui [Tue, 22 May 2018 09:28:36 +0000 (17:28 +0800)]
hdr: add osd lut table for nts test
PD#164627: hdr: add osd lut table for nts test
1. debug fs : /sys/kernel/debug/hdr/cfg_en_osd_100
1: enable new osd lut table (for nts test)
0: use old osd lut table
2. dts: amlvecm:cfg_en_osd_100
1: enable new osd lut table (for nts test)
0/not define: use old osd lut table
Change-Id: If3c51eaba58f7d83188b8920ad7dca78d3b38c19
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Zongdong Jiao [Thu, 24 May 2018 08:16:11 +0000 (16:16 +0800)]
hdmitx: add hdcp topo information [3/5]
PD#165815: hdmitx: add hdcp topo information
1. add SYSFS 'hdcp_topo_info' to represent HDCP22 Topology
2. rewrite SYSFS 'hdcp22_type', should be controlled by Daemon
Change-Id: Ie9f748c5592a32b8658b63186429794e877fd41c
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Bencheng Jing [Thu, 24 May 2018 07:29:35 +0000 (15:29 +0800)]
video: change rgb pattern matrix coefficient from 601 to 709
PD#167037: video: optimize rgb2yuv for 709
Change-Id: I25d9085ddcdde467ac8f33b4795488f3f395ced2
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
pengcheng chen [Thu, 24 May 2018 06:43:55 +0000 (14:43 +0800)]
osd: updated vinfo when it is not null every frame
PD#167032: osd: updated vinfo when it is not null every frame
Change-Id: If914fc39d014e2a1c2db564d427292977edc7530
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Nan Li [Thu, 17 May 2018 07:10:02 +0000 (15:10 +0800)]
sdio: modify Cfg_irq_sdio_sleep reg set err
PD#166568: modify Cfg_irq_sdio_sleep reg set error.
Change-Id: I82946b321a729b378968466edee50ce3f8817bff
Signed-off-by: Nan Li <nan.li@amlogic.com>
Zhe Wang [Mon, 21 May 2018 05:21:00 +0000 (13:21 +0800)]
audio: add EQ/DRC control[1/3]
PD#166486: add EQ/DRC kcontrol
Change-Id: I9b49960b0f0d8e82a46e1b9670e3352e9289e3bc
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Yi Zhou [Thu, 10 May 2018 08:03:08 +0000 (16:03 +0800)]
hdmitx: fix bsod and path dealy under hdcp22
PD#166207: hdmitx: fix bsod and path dealy under hdcp22
1.HDMITX_TOP_HDCP22_BSOD[25] doesn't use bsod
2.HDCP22REG_CTRL[6.7] match path delays
between hdcp path and non-hdcp path
Change-Id: I295804895f715687f975ab8ecfb7ea348999095a
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Jianxin Qin [Tue, 22 May 2018 09:33:24 +0000 (17:33 +0800)]
usb: modify the fifth compliance test partner
PD#163486: usb: modify the fifth compliance test parnter
Change-Id: Ic30f709ca278413576879b4ff5acc789f72c74d8
Signed-off-by: Jianxin Qin <jianxin.qin@amlogic.com>
kele bai [Tue, 15 May 2018 09:33:55 +0000 (17:33 +0800)]
di: fix nr pq load error
PD#162226: di: fix nr pq load error
1) move nr gate ctrl before nr init
2) fix skip logic error
3) load ctrl reg in irq avoid affect pre sequence
Change-Id: I9b5438f55e42eabfa37e10a04dc0f3026bbbd595
Signed-off-by: kele bai <kele.bai@amlogic.com>
nengwen.chen [Mon, 21 May 2018 03:25:43 +0000 (11:25 +0800)]
atv_demod: Add atv afc [2/2]
PD#166320: Add atv afc(Modify module params use).
Change-Id: I2d9d84c742ab1ce56c99ff8e40b483bd01d4d237
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Xing Wang [Mon, 30 Apr 2018 13:12:28 +0000 (21:12 +0800)]
audio: auge: init spdif_b when bootup and add channel status
PD#165171: audio: auge: init spdif_b when bootup and add channel status
Change-Id: I001d74a0f21fb3f02edf741bd3b87d45dfddcd5f
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Kaifu Hu [Tue, 24 Apr 2018 02:02:55 +0000 (10:02 +0800)]
hdmitx: add dolby debug info
PD#164913: hdmitx: add dolby debug info
Add dolby debug info.
Change-Id: I65156223b66bcb95c31e8b60a602f834bacf89f2
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Yan Wang [Mon, 29 Jan 2018 08:16:11 +0000 (16:16 +0800)]
SMC: secmon: uniform SMC call interface.
PD#160539: check secmon dev in dts and uniform SMC call interface.
1. SMC call interface is provided by ARCH.
arm_smccc_smc(...)
2. check secmon device is registed or not.
Change-Id: I5bd58747db5b167ab8ad59be083f31e7b6395bbf
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Hang Cheng [Wed, 9 May 2018 11:54:15 +0000 (19:54 +0800)]
hdmirx: optimize timing format detection
PD#164010: hdmirx: optimize timing format detection
Change-Id: Ibf868664d4fda5fa21d4e80cfcc6575b25acd500
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Chuangcheng Peng [Tue, 22 May 2018 07:53:22 +0000 (15:53 +0800)]
demux: modify interrupt no for dmx 2
PD#165368: enable dmux 2 work
Change-Id: Ic21bbc30c8b2cc7eeedd9206c1f355156554646f
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
pengcheng chen [Sat, 19 May 2018 14:19:24 +0000 (22:19 +0800)]
osd: return if vinfo is null
PD#165381: osd: return if vinfo is null
Change-Id: I21b7de315859268f51b185a77ad221ded5a2d755
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Sat, 19 May 2018 11:06:03 +0000 (19:06 +0800)]
osd: rdma overflow handling
PD#165381: osd: rdma overflow handling
Change-Id: Ic82a7d03ef3f985720e0c84bf9c65f5dee9324a9
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Wed, 2 May 2018 05:19:31 +0000 (13:19 +0800)]
osd: osd suspend fail issue
PD#164508: osd: suspend fail issue
Change-Id: I673a907bea2abf37d09967ef0e0a924806ce6fae
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Weiming Liu [Tue, 15 May 2018 11:29:01 +0000 (19:29 +0800)]
lcd: local dimming: add unifykey support [2/2]
PD#166418: ldim: add unifykey support
Change-Id: I0cb7629ed9824c50d5f85b7ec34e26c165a60a1e
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
Hong Guo [Mon, 21 May 2018 03:27:44 +0000 (11:27 +0800)]
arm64: dts: g12a: add cpufreq 1.908G.
PD#165143: cpufreq: add cpufreq 1.908G.
Change-Id: Id8cca5402a02372247def759ff455ef5bbe11f05
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Lei Qian [Mon, 21 May 2018 13:31:34 +0000 (21:31 +0800)]
dts: enable picdec [1/1]
PD#166830: dts: enable picdec
or we can't play 4K picture
Change-Id: I7109cd421608a82fb5cd05617bf4065d4897a430
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Zhuo Wang [Tue, 22 May 2018 03:26:34 +0000 (11:26 +0800)]
ethernet: add wol for internal phy
PD#166640: add wol for internal phy
Change-Id: I1c34af9022e5aa4968516d6826089531b55a1c10
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Cheng Tong [Mon, 21 May 2018 12:56:49 +0000 (20:56 +0800)]
dts: unify dvb dts definition
PD#163384: dts: unify dvb dts definition
Change-Id: I323c9200d2441aa8d40f4972612f9ecfbf0edc5b
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Evoke Zhang [Fri, 4 May 2018 02:54:16 +0000 (10:54 +0800)]
vout: optimize invalid mode management for init
PD#166032: vout: optimize invalid mode management for init
Change-Id: I16d36b1745faf0adf8316837d3df2d061ea94dda
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
pengcheng chen [Thu, 10 May 2018 13:33:52 +0000 (21:33 +0800)]
osd: fix dfbshow can't show picture
PD#165698: osd: fix dfbshow can't show picture
Change-Id: I0f13537391c98f106a5154d498ef46af90aa7690
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Victor Wan [Tue, 22 May 2018 02:48:42 +0000 (10:48 +0800)]
Merge branch 'android-4.9' into amlogic-4.9-dev
Weiming Liu [Mon, 14 May 2018 09:14:23 +0000 (17:14 +0800)]
ldim: add db load support
PD#166311: lcd: add ldim db load support
Change-Id: I71c8a6d3b07daae63d19dec128da3c71a6031cba
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
shuze.ma [Tue, 17 Apr 2018 07:03:45 +0000 (15:03 +0800)]
osd: support hw vsync [1/1]
PD#163001: osd: support hw vsync
Change-Id: I1e7f158b8cbc9434165745f77274ae353cfae342
Signed-off-by: shuze.ma <shuze.ma@amlogic.com>
gongwei.chen [Thu, 10 May 2018 09:02:01 +0000 (17:02 +0800)]
IR: add S905X small IR remote on T962E
PD#165963: IR: add S905X small IR remote on T962E
Change-Id: I3d3bf0abaf30c0dc8d0ce925afeeefff6af27923
Signed-off-by: Gongwei Chen <gongwei.chen@amlogic.com>
tao zeng [Wed, 16 May 2018 05:27:47 +0000 (13:27 +0800)]
mm: remove total summary of pagetypeinfo
PD#166462:
This caused vts VtsKernelProcFileApi on Android P failed.
Change-Id: I332c7ec324e7f87b0f8e0adeeef15cfd93f9b077
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
nengwen.chen [Tue, 15 May 2018 11:27:42 +0000 (19:27 +0800)]
atv_demod: Add atv afc [1/2]
PD#166320: Add atv afc.
Change-Id: I7b5d8d6290f1e394900b09a1147e7db5ec6fecf4
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Cheng Tong [Thu, 17 May 2018 06:09:49 +0000 (14:09 +0800)]
dts: update p230 dts for attach mode
PD#163384: dts: update p230 dts for attach mode
Change-Id: Iac83d28e31883f812c05f7fcd0342b0f4f225475
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Xuhua Zhang [Fri, 9 Mar 2018 03:29:14 +0000 (11:29 +0800)]
vbi: fix vbi cc error
PD#161806: vbi: fix cc nosync and disappearance problem
Add interface to read real-time data what vbi-hw write to memory.
Change-Id: Ie36a9826ecf3320f7a1a366bac7a6a4f15e6f7d2
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Hong Guo [Wed, 16 May 2018 02:20:21 +0000 (10:20 +0800)]
arm64: dts: g12a: fine-tune U220 OPP
PD#165143: fine-tune U220 OPP for stability.
Change-Id: I84d543519c9053db0060ba3d090c4ecc9f233fa8
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Yixun Lan [Fri, 18 May 2018 09:28:39 +0000 (17:28 +0800)]
reboot: make system reboot when panic occurs
PD#166529: reboot: make system reboot when panic occurs
CONFIG_PANIC_TIMEOUT=0 means no reboot when panic occurs,
This will make VTS stuck forever, fix this by making
the default reboot timeout as 5s.
Change-Id: Ib8888a4f87c6c178891d7e7fed2f186a6bfed119
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Zhongfu Luo [Thu, 10 May 2018 12:16:00 +0000 (20:16 +0800)]
dts: add defendkey function for G12A
PD#164929: G12A need to support defendkey
add defendkey function in all G12A dts
Change-Id: Id269d4c14f2c2a6ad0674191aff353122a13d558
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhuo Wang [Fri, 18 May 2018 09:56:11 +0000 (17:56 +0800)]
ethernet: fix wol_error when test eye_pattern
PD#166642: add eye pattern function for 4.9
Change-Id: If57f74262589c02e12cbff3f01745c70a687da9e
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Zhongfu Luo [Thu, 17 May 2018 11:50:11 +0000 (19:50 +0800)]
defendkey: support secure upgrade check
PD#164929: G12A need to support defendkey
Change-Id: I3c805c4dda03a39156fb91b53cc55ee8930f9e03
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
libo [Thu, 17 May 2018 08:53:36 +0000 (16:53 +0800)]
wifi: enable cfg80211 testmode for qca6174
PD#166420: enable cfg80211 testmode for qca6174
Change-Id: I65f6fa499e02fdc48bc23f1e7541fd8e7fee4850
Signed-off-by: libo <bo.li@amlogic.com>
Yi Zhou [Fri, 18 May 2018 04:41:38 +0000 (12:41 +0800)]
hdmitx: fix no display under frac_mode
PD#166241: hdmitx: fix no display under frac_mode
1.update pll parameters
2.4k60hz444/rgb8bit doesn't frac_mode
Change-Id: I45c8bade4cd8f83a7b4d36aadbdbbaa9dfca32f1
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Thu, 17 May 2018 05:16:52 +0000 (13:16 +0800)]
backlight: ldim: add remap function restrictions by ldim_func [2/2]
PD#166583: backlight: ldim: add remap function restrictions by ldim_func
also optimize iw7027 driver
Change-Id: I2a863d17d3cef521b6d7af016f4c47e29ef5b44b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Brian Zhu [Sat, 5 May 2018 08:49:12 +0000 (16:49 +0800)]
vpp: fix the vskip overflow when playing interlace video
PD#164722: vpp: fix the vskip overflow when playing interlace video
Change-Id: Id65e8c58aedf35da4762280ae19cf933f08786f9
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Sunny Luo [Fri, 18 May 2018 06:29:13 +0000 (14:29 +0800)]
spicc: g12a: spicc0 pins_c debug
PD#166556: spicc: g12a: spicc0 pins_c debug
Change-Id: I4f5f118410617cc3de8a1132100a1f7e21bc9f66
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Evoke Zhang [Wed, 2 May 2018 09:34:00 +0000 (17:34 +0800)]
u221: disable cvbsout [2/2]
PD#165555: u221: disable cvbsout
s905y2 don't support cvbsout
Change-Id: If29a9c6e9fa38cafcbcf6e75f942fb03b2cd5e1b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
MingLiang Dong [Wed, 16 May 2018 09:24:32 +0000 (17:24 +0800)]
hdr: add hlg support
PD#166567: hdr: add hlg support
Change-Id: I00acc352ce534485c8950f979704f96880811faa
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
shuanglong.wang [Mon, 14 May 2018 06:49:39 +0000 (14:49 +0800)]
tsync: do not operate tsync_mode_switch before first video toggled.
PD#165355: do not operate tsync_mode_switch before first video toggled.
Some stream in tunnel mode, first audio pts is large than
AV_DISCONTINUE_THREDHOLD_MAX(60s). In audio_hw it will check pcr and
apts diff, so large difference between pcr and apts will lead sync mode
from amster to vmaster
[ 2414.316223@3] vdec_init, dev_name:ammvdec_vp9,
vdec_type=VDEC_TYPE_STREAM_PARSER
[ 2414.326361@3] vp9: ver (
201602101,0) decinfo: 1920x1080 rate=4000
[ 2414.326827@3] mem_start_virt failed
[ 2414.330600@3] init_pic_list ok, used_buf_num = 12
[ 2414.336555@2] set pts unstable
[ 2414.338121@2] success set parent hevc_p1_composite rate to
666666666
[ 2414.356287@0]
A-discontinue,pcr=1500,vpts=0,apts=1500,diff_pts=
16209420,lugsp_5ts6
207920
[ 2414.359685@0] discontinue-tsync_mode:A->Vvptatr:S->adji
ffies=204004utsize 12179
[ 2414.366696@0] debugcnt=0x10,diff_pts=
16209420,tsync_mode=0
Change-Id: I7e33abb5e6c27169ecec86fb6e4df33de6bd80cf
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
shuanglong.wang [Mon, 14 May 2018 08:33:49 +0000 (16:33 +0800)]
avsync: av not sync problem cased by vp9 trig
PD#161895: av not sync problem cased by vp9 trig
1)vp9 initialization stream do not post VIDEO_START event,
so do not post VIDEO_STOP in unregister when not post
VIDEO_START which occured in vp9 tirg reset codec operation.
2)AV audio master adjust pcr according apts diff in
tsync tsync_set_apts need to reopen which was commented in
the begining tree of 4.9 codec
3)summit as Tim's patch
Change-Id: I9fb62aecb27f75d1ea9dff938452e0dd4f11b901
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
kele bai [Tue, 15 May 2018 06:44:32 +0000 (14:44 +0800)]
di: fix nr4 param sys interface crash
PD#166354: di: fix nr4 param sys interface crash
1) nr4 param array access violation
Change-Id: Ia79bd0ef8118715c6f1a94c5427c2c4b715f8bf8
Signed-off-by: kele bai <kele.bai@amlogic.com>
Lei Yang [Wed, 16 May 2018 07:11:01 +0000 (15:11 +0800)]
hdmirx: improve the snow noise issue during timing switching
PD#166184: hdmirx: improve the snow noise issue during timing switching
Change-Id: If143d418758f3b0d4895a7ecab87cebe98d8c457
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
pengcheng chen [Sat, 12 May 2018 08:05:19 +0000 (16:05 +0800)]
osd: add afbc arb reset which caused screen blank
PD#166248: osd: afbc arb reset which caused screen blank
Change-Id: I35035a40a50d5123394d527c60df2abb58e10b9a
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Xing Wang [Wed, 16 May 2018 03:33:41 +0000 (11:33 +0800)]
audio: codec: add suspend and resume for
ad82584f
PD#165897: audio: codec: add suspend and resume for
ad82584f
Change-Id: I5a98b4d19f4cc411ea2f94ab62bd323658fb1c25
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Evoke Zhang [Mon, 14 May 2018 12:24:25 +0000 (20:24 +0800)]
lcd: add retry flow to ensure power on state
PD#166330: mipi panel status is incorrect sometimes when lcd enable
Change-Id: Iace4963e576752208815d672befa4e215f860097
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Weiming Liu [Fri, 13 Apr 2018 10:58:06 +0000 (18:58 +0800)]
lcd: premote a common lcd_extern_i2c_probe
PD#164139: lcd: premote a common lcd_extern_i2c_probe
premote a common lcd_extern_i2c_probe() function,
so it will be shared by various display controller IC
Change-Id: I47638520f32a0865829a1fd776c3a9ca626798ba
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
MingLiang Dong [Fri, 11 May 2018 09:25:10 +0000 (17:25 +0800)]
amvecm: fix G12A eye protect function unused
PD#165151: amvecm: fix G12A eye protect function unused
1. G12A use post matrix as wb adjust module
2. fix 905x eye protect function bug
Change-Id: Ic161cafbb455cf278283d20ef9d93f18c07f5811
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jianxin Qin [Thu, 10 May 2018 06:50:56 +0000 (14:50 +0800)]
usb: phy2: analog tuning for aml-phy
PD#164286: usb: phy2: analog tuning for aml-phy
Packet lost occures with high probability in High Speed mode, This patch
re-configurate PHY parameters for improving this issue.
Change-Id: If51d300a01d8c30dce27454ad887a0d14f2d1e52
Signed-off-by: Jianxin Qin <jianxin.qin@amlogic.com>
Ao Xu [Tue, 15 May 2018 07:59:14 +0000 (15:59 +0800)]
script: amlogic: add code scan script
PD#166377: script: amlogic: add code scan script
Add code scan script.
Usage: ./script/amlogic/code_scan.sh [path]
Examples:
# scan all code
./script/amlogic/code_scan.sh
# scan specified directory
./script/amlogic/code_scan.sh drivers/amlogic
scan result is in src code's parent directory, named coverity_html
Change-Id: I069cd99d08014cc50a3bf127e199690649e196c8
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
yicheng shen [Fri, 4 May 2018 08:58:26 +0000 (16:58 +0800)]
hdmirx: fixed the pink screen issue when connect with roku box
PD#165686: hdmirx: fixed the pink screen issue when connect with roku box
Change-Id: Ia1723b9e88bcf7dd0773bc301301e682d35a9c5c
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
hongmin hua [Wed, 9 May 2018 09:17:55 +0000 (17:17 +0800)]
cec: add err initiator int for cec error [2/3]
PD#163965: cec: add err initiator int for cec error
Change-Id: I7a10f4d6a90d2e3a15ec3ed969735aadb230db43
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
shuze.ma [Tue, 15 May 2018 10:52:28 +0000 (18:52 +0800)]
hdmitx: update hdmi phsycial size during hotplug [1/1]
PD#163001: update hdmi phsycial size during hotplug
Change-Id: I71e863c56abbe5ae8dd151de481b1465317cebf1
Signed-off-by: shuze.ma <shuze.ma@amlogic.com>
Xingyu Chen [Tue, 15 May 2018 09:09:22 +0000 (17:09 +0800)]
arm64: dts: txlx: adjust the position of saradc node
PD#165196: arm64: dts: txlx: adjust the position of saradc node
In order to compatible with the saradc driver in uboot, the node
must be placed in the /{}.
Change-Id: I135a89866249b23b89f466699ecdb8cd7f21db82
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
yicheng shen [Fri, 11 May 2018 03:23:12 +0000 (11:23 +0800)]
hdmirx: add new atmos edid handle method
PD#164867: hdmirx: add new atmos edid handle method
Change-Id: I03865be263d195b3b38bf782bd52b992e2084c71
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Mark Rutland [Thu, 12 Apr 2018 11:11:09 +0000 (12:11 +0100)]
arm64: cpufeature: Pass capability structure to ->enable callback
PD#166068: arm64: cpufeature: Pass capability structure to ->enable callback
Fix CPU-hotplug fail to bringup issue once stopped CPU.
From: Will Deacon <will.deacon@arm.com>
commit
0a0d111d40fd1dc588cc590fab6b55d86ddc71d3 upstream.
In order to invoke the CPU capability ->matches callback from the ->enable
callback for applying local-CPU workarounds, we need a handle on the
capability structure.
This patch passes a pointer to the capability structure to the ->enable
callback.
Change-Id: I2c002dfbba4e923d0e44ab085ede46e6f47c9755
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Mark Rutland [Thu, 12 Apr 2018 11:11:07 +0000 (12:11 +0100)]
arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
PD#166068: arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
From: James Morse <james.morse@arm.com>
Fix CPU-hotplug fail to bringup issue once stopped CPU.
commit
edf298cfce47ab7279d03b5203ae2ef3a58e49db upstream.
this_cpu_has_cap() tests caps->desc not caps->matches, so it stops
walking the list when it finds a 'silent' feature, instead of
walking to the end of the list.
Prior to v4.6's
644c2ae198412 ("arm64: cpufeature: Test 'matches' pointer
to find the end of the list") we always tested desc to find the end of
a capability list. This was changed for dubious things like PAN_NOT_UAO.
v4.7's
e3661b128e53e ("arm64: Allow a capability to be checked on
single CPU") added this_cpu_has_cap() using the old desc style test.
Change-Id: I29788b05eb636de777de5d4f423097804d465a7b
CC: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Jihong Sui [Mon, 14 May 2018 09:56:03 +0000 (17:56 +0800)]
hdr: fix the bug that sdr can't switch to hdr for g12a
PD#166004: hdr: fix the bug that sdr can't switch to hdr for g12a
Change-Id: Ia7c14f86d63aa8b00617c47abad14e2eab96d2f6
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Hong Guo [Mon, 14 May 2018 11:35:02 +0000 (19:35 +0800)]
arm64: dts: g12a: add cpufreq 1.92G.
PD#165143: cpufreq: add cpufreq 1.92G.
Change-Id: I8b9dddf8c4c138bf4b5763f707c174ad48e8a53a
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
bin pang [Mon, 14 May 2018 09:37:57 +0000 (17:37 +0800)]
audio: add 16K mic aux and 32bit feature
PD#164543: audio: 16K mic aux and 32bit support[2/2]
Change-Id: I7e19374cae45821c6189c60eff4b1e2d872ba4c6
Signed-off-by: bin pang <bin.pang@amlogic.com>
Jian Hu [Mon, 14 May 2018 05:29:53 +0000 (13:29 +0800)]
arm64: dts: g12a: add default drive strength for i2c controllers
PD#165715: arm64: dts: g12a: add default drive strength for i2c controllers
Change-Id: I4d909e25d08fa29ac6ebdf756af76bef86bf0bf6
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
nengwen.chen [Thu, 10 May 2018 11:32:49 +0000 (19:32 +0800)]
atv_demod: Add atv color and sound system setting separately [7/8]
PD#165560: Add atv color and sound system setting separately.
Change-Id: I8279143706ddfd705bce95c3f40f701ae9af7829
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Huan Biao [Fri, 11 May 2018 02:57:31 +0000 (10:57 +0800)]
thermal: fix thermal issue
PD#166068: thermal: fix cpu cooldev work issue and gpupp not match
Change-Id: I26f4626b309cad984e59f3c2f30eb60f1ec5121b
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Zhuo Wang [Mon, 14 May 2018 04:43:29 +0000 (12:43 +0800)]
ethernet: bypass wol_reg12 check when 10M
PD#166287: 10M wol_reg12 error
Change-Id: I1b9bd412786509d2a4889c58ef634f6391b54e9e
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Jihong Sui [Thu, 10 May 2018 11:18:01 +0000 (19:18 +0800)]
dtv_demod: modified dtv demod
PD#165971: dtv_demod: modified dtv demod
1. change folder name(amldemod ->dtv_demod);
2. set status 0 when not support;
Change-Id: I96c23b0b333ee0967d5013ebc8915fdffa097433
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Xu [Fri, 11 May 2018 14:39:17 +0000 (07:39 -0700)]
Merge "audio: add audio spdif format kcontrol [1/2]" into amlogic-4.9-dev
Brian Zhu [Wed, 9 May 2018 14:12:52 +0000 (22:12 +0800)]
vpp: fix the bypass pps condition for non-linear scaler
PD#164896: vpp: fix the bypass pps condition for non-linear scaler
Change-Id: Ie4e30499b6fe12253da52194d2b89002faf28bd2
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Hang Cheng [Thu, 26 Apr 2018 08:48:08 +0000 (16:48 +0800)]
hdmirx: optimize for cases do hdcp1.4 interaction very early
PD#165229: hdmirx: optimize for cases do hdcp1.4 interaction very early
Change-Id: I8b07c2f1be524eed47bde77681c3724b110db618
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Sandy Luo [Fri, 11 May 2018 08:41:02 +0000 (16:41 +0800)]
dts: g12 socket: change max freq
PD#164108: change max freq to 2G Hz
Change-Id: I6ccb051485ee2ff04ddb6558a63340cd52151464
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Zhe Wang [Fri, 11 May 2018 06:53:30 +0000 (14:53 +0800)]
audio: add audio spdif format kcontrol [1/2]
PD#165552: add audio spdif format kcontrol
1) remove drc control for ground noise
2) fast attrack for volume
3) add spdif format kcontrol
Change-Id: I3b4574170d808dd7fe955d249e3414880285eb3e
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Yixun Lan [Fri, 11 May 2018 06:20:29 +0000 (14:20 +0800)]
debug: drop sscanf, use kstrto variant instead
PD#165796: debug: drop sscanf, use kstrto variant instead
kstrto is kernel reconmmend function which is more safe than sscanf
this will also fix the following checkpatch.pl warning
WARNING: Prefer kstrto<type> to single variable sscanf
+ ret = sscanf(buf, "%ld", &val);
Change-Id: I9a4673b9aa43c10f51a20778ba520461ee0a7984
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Lei Qian [Thu, 10 May 2018 13:17:58 +0000 (21:17 +0800)]
hdmirx: fix deadlock issue
PD#164867: fix deadlock issue
Revert "hdmirx: add new atmos edid handle method"
This reverts commit
6bf27f9a5a1777fe965f0d381296f886085a3c87.
Change-Id: Ica0d99c9b4b3f05ccb86c85693c5cc4d2871bd7a
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Nian Jing [Thu, 19 Apr 2018 11:46:03 +0000 (19:46 +0800)]
cvbs: cvbs performance for g12a Rev.B
PD#164108: cvbs performance for g12a Rev.B
Change-Id: If140535984762cf6d843878e78ab285e014868e7
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
wenbiao zhang [Wed, 9 May 2018 09:19:08 +0000 (17:19 +0800)]
ethernet: chage u200 buildroot default as internal phy
PD#163830: ethernet: chage u200 buildroot default as internal phy
Change-Id: I1be5bfddae6fc0c43e3da5f604a80cca36cfad6e
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log