drm/i915: Start using struct intel_csc_matrix for chv cgm csc

Convert chv_cgm_csc_convert_ctm() over to using the new
intel_csc_matrix structure. No pre/post offsets on this
hardware so only the coefficients get filled out.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915: Split chv_load_cgm_csc() into pieces

Split chv_cgm_csc_convert_ctm() out from chv_load_cgm_csc() so
that we have functions with clear jobs. This is also how the ilk+
code is already structured.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-4-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915: Introduce intel_csc_matrix struct

Introduce a structure that can hold our CSC matrices. In there
we shall have the preoffsets, postoffsets, and coefficients,
all in platform specific format (at least for now).

We shall start by converting the ilk+ code to make use of
the new structure. chv will come later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915: Fix limited range csc matrix

Our current limited range matrix is a bit off. I think it
was originally calculated with rounding, as if we wanted
the normal pixel replication type of behaviour.
That is, since the 8bpc max value is 0xeb we assumed the
16bpc max value should be 0xebeb, but what the HDMI spec
actually says it should be is 0xeb00.

So to get what we want we make the formula
 out = in * (235-16) << (12-8) / in_max + 16 << (12-8),
with 12 being precision of the csc, 8 being the precision
of the constants we used.

The hardware takes its coefficients as floating point
values, but the (235−16)/255 = ~.86, so exponent 0
is what we want anyway, so it works out perfectly without
having to hardcode it in hex or start playing with floats.

In terms of raw numbers we are feeding the hardware the
post offset changes from 0x101 to 0x100, and the coefficient
changes from 0xdc0 to 0xdb0 (~.860->~.855). So this should
make everything come out just a tad darker.

I already used better constants in lut_limited_range() earlier
so the output of the two paths should be closer now.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915/wakeref: fix kernel-doc comment

Fix the warning:

drivers/gpu/drm/i915/intel_wakeref.h:118: warning: expecting prototype
for intel_wakeref_get_if_in_use(). Prototype was for
intel_wakeref_get_if_active() instead

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-2-jani.nikula@intel.com

drm/i915/tc: demote a kernel-doc comment to a regular comment

There's not much point in a static work function having a kernel-doc
comment. Just clean it up and make it a regular comment.

This fixes the kernel-doc warnings:

drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Function
parameter or member 'work' not described in
'intel_tc_port_disconnect_phy_work'

drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Excess function
parameter 'dig_port' description in 'intel_tc_port_disconnect_phy_work'

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-1-jani.nikula@intel.com

drm/i915/clock: mass rename dev_priv to i915

Follow the contemporary naming style. Include some indentation fixes
while at it on the affected statements.

One function needs to keep using dev_priv due to implicit dev_priv usage
in a macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-2-jani.nikula@intel.com

drm/i915: rename intel_pm.[ch] to intel_clock_gating.[ch]

Observe that intel_pm.[ch] is now purely about clock gating, so rename
them to intel_clock_gating.[ch]. Rename the functions to
intel_clock_gating_*() to follow coding conventions.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-1-jani.nikula@intel.com

drm/i915/pxp: limit drm-errors or warning on firmware API failures

MESA driver is creating protected context on every driver handle
creation to query caps bits for app. So when running CI tests,
they are observing hundreds of drm_errors when enabling PXP
in .config but using SOC fusing or BIOS configuration that cannot
support PXP sessions.

The fixes tag referenced below was to resolve a related issue
where we wanted to silence error messages, but that case was due
to outdated IFWI (firmware) that definitely needed an upgrade and
was, at that point, considered a one-off case as opposed to today's
realization that default CI was enabling PXP in kernel config for
all testing.

So with this patch, let's strike a balance between issues that is
critical but are root-caused from HW/platform gaps (louder drm-warn
but just ONCE) vs other cases where it could also come from session
state machine (which cannot be a WARN_ONCE since it can be triggered
due to runtime operation events).

Let's use helpers for these so as more functions are added in future
features / HW (or as FW designers continue to bless upstreaming of
the error codes and meanings), we only need to update the helpers.

NOTE: Don't completely remove FW errors (via drm_debug) or else cusomer
apps that really needs to know that content protection failed won't
be aware of it.

v2: - Add fixes tag (Trvtko)
v3: - Break multi-line drm_dbg strings into separate drm_dbg (Daniele)
    - Fix couple of typecasting nits (Daniele)
v4: - Unsuccessful PXP FW cmd due to platform configuration shouldn't
      use drm_WARN_once (Tvrtko), Switched to use drm_info_once.
v5: - Added "reported-and-tested" by Eero.

Reported-and-tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Fixes: b762787bf767 ("drm/i915/pxp: Use drm_dbg if arb session failed due to fw version")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323184156.4140659-1-alan.previn.teres.alexis@intel.com

drm/i915: run kernel-doc on headers as part of HDRTEST

Enabling kernel-doc warnings in commit aaee4bbe8a1a ("drm/i915: enable
kernel-doc warnings for CONFIG_DRM_I915_WERROR=y") actually only covers
the .c files. And it's good for avoiding warnings in W= builds. However,
we need something more to check for kernel-doc issues in headers. Add it
as part of the existing HDRTEST.

We have tons of issues, and this unleashes warnings galore on
CONFIG_DRM_I915_WERROR=y. It doesn't fail the build because (at least
for now) we don't pass -Werror to kernel-doc.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404090528.173075-1-jani.nikula@intel.com

drm/i915: Implement UHBR bandwidth check

According to spec, we should check if output_bpp * pixel_rate is less
than DDI clock * 72, if UHBR is used.

v2: - s/pipe_config/crtc_state/ (Jani Nikula)
    - Merged previous patch into that one, to remove empty function(Jani Nikula)

v3: - Make that constraint check to be DSC-related only
    - Limit this to only DISPLAY_VER <= 13

v4: - Move constraint check to the top(Vinod Govindapillai)

HSDES: 1406899791
BSPEC: 49259

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324135125.6720-1-stanislav.lisovskiy@intel.com

drm/i915: enable kernel-doc warnings for CONFIG_DRM_I915_WERROR=y

Increase awareness of kernel-doc issues by enabling doc check locally
when CONFIG_DRM_I915_WERROR=y is enabled.

Once the warnings have been fixed, we can pass -Werror to kernel-doc
locally, and fail the build when there are kernel-doc warnings in i915.

v2: Don't check for KBUILD_EXTRA_WARN (Masahiro)

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403125710.3617230-1-jani.nikula@intel.com

drm/i915/psr: split out PSR regs to a separate file

Clean up i915_reg.h by splitting out PSR regs to
display/intel_psr_regs.h.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331090949.2858951-2-jani.nikula@intel.com

drm/i915/wm: split out SKL+ watermark regs to a separate file

Clean up i915_reg.h by splitting out SKL+ watermark regs to
display/skl_watermark_regs.h.

v2: Rebased

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331090949.2858951-1-jani.nikula@intel.com

drm/i915: Explain the magic numbers for AUX SYNC/precharge length

Replace the hardcoded final numbers in the AUX SYNC/precharge
setup, and derive those from numbers from the (e)DP specs.

The new functions can serve as the single point of truth for
the number of SYNC pulses we use.

Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>

drm/i915: Fix fast wake AUX sync len

Fast wake should use 8 SYNC pulses for the preamble
and 10-16 SYNC pulses for the precharge. Reduce our
fast wake SYNC count to match the maximum value.
We also use the maximum precharge length for normal
AUX transactions.

Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>

drm/i915/hwmon: Use 0 to designate disabled PL1 power limit

On ATSM the PL1 limit is disabled at power up. The previous uapi assumed
that the PL1 limit is always enabled and therefore did not have a notion of
a disabled PL1 limit. This results in erroneous PL1 limit values when the
PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit
was previously shown as 0 which means a low PL1 limit whereas the limit
being disabled actually implies a high effective PL1 limit value.

To get round this problem, the PL1 limit uapi is expanded to include a
special value 0 to designate a disabled PL1 limit. A read value of 0 means
that the PL1 power limit is disabled, writing 0 disables the limit.

The link between this patch and the bugs mentioned below is as follows:
* Because on ATSM the PL1 power limit is disabled on power up and there
  were no means to enable it, we previously implemented the means to
  enable the limit when the PL1 hwmon entry (power1_max) was written to.
* Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value
  from all hwmon sysfs  (b) does a bunch of random writes and finally (c)
  restores the orig value read. On ATSM since the orig value is 0, when
  the IGT restores the 0 value, the PL1 limit is now enabled with a value
  of 0.
* PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to
  100 MHz. This causes GuC FW load and several IGT's to start timing out
  and gives rise to these Intel CI bugs. After this patch, writing 0 would
  disable the PL1 limit instead of enabling it, avoiding the freq drop
  issue.

v2: Add explanation for bugs mentioned below (Rodrigo)
v3: Eliminate race during PL1 disable and verify (Tvrtko)
    Change return to -ENODEV if verify fails (Tvrtko)

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8060
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230401024146.1826092-1-ashutosh.dixit@intel.com

drm/i915/display/intel_wm: Fix a little doc-rot in intel_update_watermarks()

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Function parameter or member 'i915' not described in 'intel_update_watermarks'
 drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Excess function parameter 'dev_priv' description in 'intel_update_watermarks'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-20-lee@kernel.org

drm/i915/display/intel_display_power: Fix incorrectly documented function __intel_display_power_put_async()

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/display/intel_display_power.c:712: warning: expecting prototype for intel_display_power_put_async(). Prototype was for __intel_display_power_put_async() instead

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-18-lee@kernel.org

drm/i915/display/intel_display_debugfs: Fix incorrect param naming for 'intel_connector'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add'
 drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org

drm/i915: Remove the encoder update_prepare()/complete() hooks

The encoder update_prepare()/complete() hooks were added to hold a
TC port link reference for all outputs in the atomic state around the
whole modeset enable sequence - thus locking the ports' TC mode - and
set the TBT/DP-alt PLL type corresponding to the current TC mode.

Since nothing depends on the PLL selection before/after then encoder's
pre_pll_enable/post_pll_disable hooks are called, the above steps can be
moved to these hooks, so do that and remove the
update_prepare()/complete() hooks.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-30-imre.deak@intel.com

drm/i915: Remove TC PHY disconnect workaround

After the previous patch the workaround for a TC PHY hang issue is not
required any more, remove it.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-29-imre.deak@intel.com

drm/i915: Disable DPLLs before disconnecting the TC PHY

Bspec requires disabling the DPLLs on TC ports before disconnecting the
port's PHY. Add a post_pll_disable encoder hook and move the call to
disconnect the port's PHY from the post_disable hook to the new hook.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-28-imre.deak@intel.com

drm/i915: Move shared DPLL disabling into CRTC disable hook

The spec requires disabling the PLL on TC ports before disconnecting the
port's PHY. Prepare for that by moving the PLL disabling to the CRTC
disable hook, while disconnecting the PHY will be moved to the
post_pll_disable() encoder hook in the next patch.

v2: Move the call from intel_crtc_disable_noatomic() as well.

Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v1
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-27-imre.deak@intel.com

drm/i915/adlp/tc: Align the connect/disconnect PHY sequence with bspec

Bspec has updated the TC connect/disconnect sequences, add the required
platform hooks for these.

The difference wrt. the old sequence is the order of taking the PHY
ownership - while holding a port power reference this requires - and
blocking the TC-cold power state.

Bspec: 49294

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-26-imre.deak@intel.com

drm/i915/tc: Don't connect the PHY in intel_tc_port_connected()

Connecting the PHY for connector probing - also blocking TC-cold - isn't
required and has some overhead. Taking only the mutex is sufficient, so
do that.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-25-imre.deak@intel.com

drm/i915/tc: Get power ref for reading the HPD live status register

Enable the power required for the HPD live status register access
instead of depending on the caller blocking the TC-cold power state
(during HW readout and connector probing).

A follow up patch will remove connecting/disconnecting the PHY around
connector probing, so querying the HPD status can happen in this case
without TC-cold being blocked.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-24-imre.deak@intel.com

drm/i915/adlp/tc: Use the DE HPD ISR register for hotplug detection

The spec says to use the CPU ISR registers for DP-alt/TBT HPD detection
on ADLP, so do that instead of using the related IOM/TCSS registers.

Bspec: 55480, 55482, 49212, 49305

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-23-imre.deak@intel.com

drm/i915/tc: Add TC PHY hook to init the PHY

Add a hook for platform specific PHY initialization. Move the detection
of modular FIAs to the TGL handler, skipping this on ADLP+ where the
FIAs are always modular, not requiring a detection.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-22-imre.deak@intel.com

drm/i915/tc: Add asserts in TC PHY hooks that the required power is on

Add an assert to each TC PHY hook that their required power domain is
enabled.

While at it add a comment describing the domains used on each platform
and TC mode.

v2: Fix non kernel-doc multiline comments. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-21-imre.deak@intel.com

drm/i915/tc: Add TC PHY hook to get the TC-cold blocking power domain

Instead of the corresponding if ladder, add a TC PHY hook to get the
platform and TC mode specific power domain used for blocking the TC-cold
power state.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-20-imre.deak@intel.com

drm/i915/tc: Drop tc_cold_block()/unblock()'s power domain parameter

Simplify tc_cold_block()/unblock() by dropping their power domain
parameter. The power domain depends on the current TC mode, which -
after the previous patch - can't change while the PHY is connected,
holding a TC-cold-off power domain reference. Based on this the domain
can be deducted from the current TC mode instead of having to pass this
as a parameter.

Blocking TC-cold for the PHY HW readout happens before the current TC
mode is determined, so here the initial power domain must be still
manually passed.

For debugging still keep track of the domain used for tc_cold_block()
and verify that it remained the same until tc_cold_unblock().

While at it rename tc_cold_get_power_domain() to
tc_phy_cold_off_domain(), reflecting the name of platform specific hook
added in the next patch.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-19-imre.deak@intel.com

drm/i915/tc: Remove redundant wakeref=0 check from unblock_tc_cold()

After the previous patch unblock_tc_cold() will not be called in a
disconnected mode, so the wakeref passed to it will be always non-zero.
Remove the redundant check.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-18-imre.deak@intel.com

drm/i915/tc: Block/unblock TC-cold in the PHY connect/disconnect hooks

Move blocking/unblocking the TC-cold power state to the platform
specific PHY connect / disconnect hooks. This allows for adjusting the
connect/disconnect sequence as required for each platform.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-17-imre.deak@intel.com

drm/i915/tc: Check TC mode instead of the VBT legacy flag

After the previous patch the TC mode in the connect/disconnect functions
is always in sync with the VBT legacy port flag, so for consistency with
the rest of the function check the TC mode instead of the VBT flag.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-16-imre.deak@intel.com

drm/i915/tc: Fix up the legacy VBT flag only in disconnected mode

A follow-up patch simplifies the tc_cold_block()/unblock() functions,
dropping the power domain parameter. For this it must be ensured that
the power domain - which depends on the actual TC mode and so the VBT
legacy port flag - can't change while the PHY is in a connected state
and accordingly TC-cold is blocked. Make this so, by fixing up the VBT
legacy flag only in the disconnected TC mode, instead of whenever the
HPD state is retrieved.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-15-imre.deak@intel.com

drm/i915/tc: Add TC PHY hooks to connect/disconnect the PHY

Add TC PHY hooks to connect/disconnect the PHY. A follow-up patch will
add the ADLP specific hooks for these.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-14-imre.deak@intel.com

drm/i915/tc: Factor out tc_phy_verify_legacy_or_dp_alt_mode()

Factor out a function verifying the PHY connected state in legacy or
DP-alt mode. This is common to all platforms, which can be reused in
platform specific connect hooks added in follow-up patches.

No functional changes.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-13-imre.deak@intel.com

drm/i915/tc: Add generic TC PHY connect/disconnect handlers

Add generic handlers to connect/disconnect a PHY.

Setting the TC mode to the target mode deducted from the HPD state and -
if connecting to this mode fails - falling back to connecting to the
default (TBT) mode are common to all platforms; move the logic for this
from the ICL specific connect / disconnect handlers to the generic ones.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-12-imre.deak@intel.com

drm/i915/tc: Add TC PHY hook to read out the PHY HW state

Add a TC PHY hook to read out the PHY HW state on each platform, move
the common parts to the generic helper.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-11-imre.deak@intel.com

drm/i915/tc: Add TC PHY hooks to get the PHY ready/owned state

Add TC PHY hooks to get the PHY ready/owned state on each platform,
replacing the corresponding if ladder.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-10-imre.deak@intel.com

drm/i915/tc: Add TC PHY hook to get the PHY HPD live status

Add a table of TC PHY hooks which can be used to call platform specific
TC PHY handlers, replacing the corresponding if ladders.

Add the hook to retrieve the PHY's HPD live status. Move the common part
fixing up the VBT legacy port flag to the generic helper.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-9-imre.deak@intel.com

drm/i915/tc: Move the intel_tc_port struct declaration to intel_tc.c

Move the intel_tc_port struct to intel_tc.c for better isolation. This
requires allocating the struct dynamically.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-8-imre.deak@intel.com

drm/i915/tc: Check for TC PHY explicitly in intel_tc_port_fia_max_lane_count()

Check explicitly if the port passed to
intel_tc_port_fia_max_lane_count() has a TC PHY, instead of relying on
the default TC mode value set for non-TC PHY ports.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-7-imre.deak@intel.com

drm/i915/tc: Move TC port fields to a new intel_tc_port struct

Move the TC port specific fields from intel_digital_port to a new
intel_tc_port struct. Pass an intel_tc_port pointer to all static
functions in intel_tc.c keeping dig_port accessible for these via a
pointer stored in the new struct.

The next patch will allocate the intel_tc_port dynamically, allowing
moving the struct definition to intel_tc.c.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-6-imre.deak@intel.com

drm/i915/tc: Use the tc_phy prefix for all TC PHY functions

For consistency use the tc_phy prefix for all TC PHY functions.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-5-imre.deak@intel.com

drm/i915/tc: Rename tc_phy_status_complete() to tc_phy_is_ready()

For consistency rename tc_phy_status_complete() to tc_phy_is_ready()
following the terminology of new platforms.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-4-imre.deak@intel.com

drm/i915/tc: Use the adlp prefix for ADLP TC PHY functions

Use the usual adlp prefix for all ADLP specific TC PHY functions. Other
ADL platforms don't support TC.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-3-imre.deak@intel.com

drm/i915/tc: Group the TC PHY setup/query functions per platform

Arrange the TC PHY HW state setup/query functions into platform
specific and generic groups. This prepares for upcoming patches adding
generic TC PHY handlers and platform specific hooks for these,
replacing the corresponding if ladders.

No functional changes.

v2: Fix non kernel-doc multiline comments. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-2-imre.deak@intel.com

drm/i915/dsc: Add debugfs entry to validate DSC output formats

DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.

v2: -Func name changed to intel_output_format_name() (Jani N)
    -Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com

drm/i915/vdsc: Check slice design requirement

Add function to check if slice design requirements are being
met as defined in Bspec: 49259 in the section
Slice Design Requirement

--v7
-remove full bspec link [Jani]
-rename intel_dsc_check_slice_design_req to
intel_dsc_slice_dimensions_valid [Jani]

--v8
-fix condition to check if slice width and height are
of two
-fix minimum pixel in slice condition

--v10
-condition should be < rather then >= [Uma]

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-7-suraj.kandpal@intel.com

drm/i915/dsc: Fill in native_420 field

Now that we have laid the groundwork for YUV420 Enablement
we fill up native_420 field in vdsc_cfg and add appropriate
checks wherever required.

---v2
-adding native_422 field as 0 [Vandita]
-filling in second_line_bpg_offset, second_line_offset_adj
and nsl_bpg_offset in vds_cfg when native_420 is true

---v3
-adding display version check to solve igt issue

--v7
-remove is_pipe_dsc check as its always true for D14 [Jani]

--v10
-keep sink capability check [Jani]
-move from !(x == y  || w == z) to x !=y && w != z [Jani]

--v11
-avoid native_420 computation if not gen14 [Uma]

--v12
-fix state mismatch issue of compressed_bpp

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-6-suraj.kandpal@intel.com

drm/i915/dsc: Enable YCbCr420 for VDSC

Implementation of VDSC for YCbCr420.
Add QP tables for 8,10,12 BPC from rc_tables.h in intel_qp_tables.c
(Derived from C-Model, which is given along with DSC1.2a Spec from Vesa)
intel_lookup_range_min/max_qp functons need to take into account the
output format. Based on that appropriate qp table need to be chosen.
Other rc_parameters need to be set where currently values for 444 format
is hardcoded in calculate_rc_parameters( ).
vdsc_cfg struct needs to be filled with output format information, where
these are hardcoded for 444 format.
Bspec: 49259

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Vandita Kulkarni <Vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-5-suraj.kandpal@intel.com

drm/i915/dsc: Adding the new registers for DSC

Adding new DSC register which are introducted MTL onwards

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Vandita Kulkarni <Vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-4-suraj.kandpal@intel.com

drm/i915/dp: Check if DSC supports the given output_format

Go with DSC only if the given output_format is supported.

v2: Use drm helper to get DSC format support for sink.

v3: remove drm_dp_dsc_compute_bpp.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-3-suraj.kandpal@intel.com

drm/dp_helper: Add helper to check DSC support with given o/p format

Add helper to check if the DP sink supports DSC with the given
o/p format.

v2: Add documentation for the helper. (Uma Shankar)

v3: /** instead of  /* (Uma Shankar)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-2-suraj.kandpal@intel.com

drm/i915: Define cursor chicken reg

Define CUR_CHICKEN so we don't have to remember the offset.
Looks like it's getting introduced in mtl.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329190445.13456-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Document that PLANE_CHICKEN are for tgl+

Add tgl+ comments to the PLANE_CHICKEN registers which
I apparently forgot to add when defining the registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329190445.13456-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Skip cursor when writing PLANE_CHICKEN

Cursor is not a universal plane and thus doesn't have the
PLANE_CHICKEN register. Skip it.

Fixes: c5de248484af ("drm/i915/dpt: Add a modparam to disable DPT via the chicken bit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329190445.13456-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/psr: Implement Display WA #1136

Implement Display WA #1136 for Pre-ICL.

Bspec: 21664

v2: Handle disable psr in pre/post plane hooks

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-7-jouni.hogander@intel.com

drm/i915/psr: Check that vblank is long enough for psr2

Ensure vblank >= psr2 vblank
where
Psr2 vblank = PSR2_CTL Block Count Number maximum line count.

Bspec: 71580, 49274

v2: Use calculated block count number maximum line count

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-6-jouni.hogander@intel.com

drm/i915/psr: Add helpers for block count number handling

Add helpers to make it more clear how PSR2_CTL[Block Count Number]
is configured.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-5-jouni.hogander@intel.com

drm/i915/psr: Implement Wa_14015648006

PSR WM optimization should be disabled based on any wm level being
disabled. Also same WA should be applied for ICL as well.

Bspec: 71580

v5:
 - Set in pre plane hook and clear in post plane hook
v4:
 - Handle mode change in psr enable/disable
 - Handle wm_level_disable changes separately in pre plane hook
v3:
 - Split patch
v2:
 - set/clear chicken bit in post_plane_update
 - apply for ICL as well

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-4-jouni.hogander@intel.com

drm/i915/psr: Modify/Fix Wa_16013835468 and prepare for Wa_14015648006

Wa_16013835468 is a separate from Wa_14015648006 and needs to be
applied for display version 12. Fix this by removing all the
references to Wa_14015648006 and apply Wa_16013835468 according to
Bspec.

Also move workaround into separate function as a preparation for
Wa_14015648006 implementation.

Bspec: 55378

v3:
 - apply for display version 12 only
v2:
 - keep applying the wa in intel_psr_enable_source

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-3-jouni.hogander@intel.com

drm/i915/psr: Unify pre/post hooks

pre/post hooks are doing things differently. Unify them.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-2-jouni.hogander@intel.com

drm/i915/mtl: Fix MTL stolen memory GGTT mapping

The PTEs expect the offset from the base of the fake LMEM region (i.e.
the base of stolen) and not from the base of the DSM. Quoting the specs:
"Driver will set the Device Memory bit = 1 in the PTE when pointing to a
page in DSM and program the PTE with offset from LMEM_BAR. Device Memory
Offset from LMEM_BAR is same as offset from BGSM."

DSM starts 8MBs from BGSM, so we set dsm_base = 8MB.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328012430.2524330-1-daniele.ceraolospurio@intel.com

drm/i915/dsb: split out DSB regs to a separate file

Clean up i915_reg.h by splitting out DSB regs to
display/intel_dsb_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d74b3c564b2d080bf689b3360f1a5e62e47f2e7c.1678973283.git.jani.nikula@intel.com

drm/i915/fdi: split out FDI regs to a separate file

Clean up i915_reg.h by splitting out FDI regs to
display/intel_fdi_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bba37e46d767e2193d49d1d2e289040c6bf8229b.1678973282.git.jani.nikula@intel.com

drm/i915/aux: split out DP AUX regs to a separate file

Clean up i915_reg.h by splitting out DP AUX regs to
display/intel_dp_aux_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa93b34e786c5566acf8f053ffed96c160a23898.1678973282.git.jani.nikula@intel.com

drm/i915/tv: split out TV regs to a separate file

Clean up i915_reg.h by splitting out TV regs to display/intel_tv_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be4a946a7772f5b4483ad9e078cb62158849683e.1678973282.git.jani.nikula@intel.com

drm/i915/pps: split out PPS regs to a separate file

Clean up i915_reg.h by splitting out PPS regs to
display/intel_pps_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80d66ee6d7e56153a0ab25640ac2dad239b1ef6e.1678973282.git.jani.nikula@intel.com

drm/i915: Make utility pin asserts more accurate

Only the PWM output mode of the utility pin is incompatible
with DC6/LCPLL disable. Check for that specifically.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6609
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328164938.8193-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC

For obvious reasons, we use compressed bpp instead of pipe bpp for
DSC DP SST case. Lets be consistent and use compressed bpp instead of
pipe bpp, also in DP MST DSC case.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Link: https://patchwork.freedesktop.org/patch/msgid/20230327064217.24033-1-stanislav.lisovskiy@intel.com

drm/i915: remove unused config DRM_I915_UNSTABLE

Essentially this is a revert of commit d9d54a530a70 ("drm/i915: Put
future HW and their uAPIs under STAGING & BROKEN").

We currently have no users for this config option. The last one was
removed in commit 8c26491f5853 ("drm/i915: Kill the fake lmem
support"). Drop it altogether; it's easy enough to resurrect if need
arises.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327105330.312131-2-jani.nikula@intel.com

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/ips: Add i915_ips_false_color debugfs file

Similar to FBC let's expose an debugfs file to control
IPS false color. Enabling this provides an immediate visual
feedback on whether IPS is working or not.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327133942.22063-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/ips: Make IPS debugfs per-crtc

IPS is a per-pipe feature, so let's move the debugfs stuff
under the crtc directory, and only register it when IPS
is actually available.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327133942.22063-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'drm-rcar-next-20230325' of git://git./linux/kernel/git/pinchartl/linux into drm-next

Miscellaneous fixes and improvements for rcar-du

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230325204922.GD19335@pendragon.ideasonboard.com

drm/i915/reg: use the correct register to access SAGV block time

Wrong register address is used to read the SAG block time. Fix
the register address according to the bspec.

Bspec: 64608

Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323114426.41136-3-vinod.govindapillai@intel.com

drm/i915/reg: fix QGV points register access offsets

Wrong offsets are calculated to read QGV point registers. Fix it
to read from the correct registers.

Bspec: 64602

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323114426.41136-2-vinod.govindapillai@intel.com

drm: rcar-du: Fix a NULL vs IS_ERR() bug

The drmm_encoder_alloc() function returns error pointers.  It never
returns NULL.  Fix the check accordingly.

Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Write correct values in DORCR reserved fields

The DORCR register controls the routing of clocks and data between DU
channels within a group. For groups that contain a single channel,
there's no routing option to control, and some fields of the register
are then reserved. On Gen2 those reserved fields are documented as
required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D
reserved fields must be set to 1.

The DU driver initializes the DORCR register in rcar_du_group_setup(),
where it ignores the PG1T, DK1S and PG1D, and then configures those
fields to the correct value in rcar_du_group_set_routing(). This hasn't
been shown to cause any issue, but prevents certifying that the driver
complies with the documentation in safety-critical use cases.

As there is no reasonable change that the documentation will be updated
to clarify that those reserved fields can be written to 0 temporarily
before starting the hardware, make sure that the registers are always
set to valid values.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

drm: rcar-du: Rename DORCR fields to make them 0-based

The DORCR fields were documented in the R-Car H1 datasheet with 1-based
named, and then got renamed to 0-based in Gen2. The 0-based names are
used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to
make them 0-based, in order to increase readability of the code when
comparing it with the documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

drm: rcar-du: Disable alpha blending for DU planes used with VSP

When the input to a DU channel comes from a VSP, the DU doesn't perform
any blending operation. Select XRGB8888 instead of ARGB8888 to ensure
that the corresponding registers don't get written with invalid values.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

drm: rcar-du: Don't write unimplemented ESCR and OTAR registers on Gen3

The ESCR and OTAR registers are not present in all DU channels on Gen3
SoCs. ESCR only exists in channels that can be routed to an LVDS or
DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing
those registers for other channels. This replaces the DU gen check, as
Gen4 doesn't have LVDS or DPAD outputs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

drm: rcar-du: lvds: Fix LVDS PLL disable on D3/E3

On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to
the DU, regardless of whether the LVDS output is used or not. When using
the DPAD (RGB) output, the DU driver thus enables and disables the LVDS
PLL manually, while when using the LVDS output, it lets the LVDS bridge
driver handle the PLL configuration internally as part of the atomic
enable and disable operations.

This causes an issue when using the LVDS output. As bridges are disabled
before CRTCs, the current implementation violates the enable/disable
sequences documented in the hardware datasheet, which requires the dot
clock to be enabled before the CRTC is started and disabled after it
gets stopped.

Fix the problem by enabling/disabling the LVDS PLL manually from the DU
regardless of which output is used, and skipping the PLL handling in the
LVDS bridge atomic enable and disable operations.

This is however not enough. Disabling the LVDS encoder while leaving the
PLL on still results in a vertical blanking wait timeout when disabling
the DU. Investigation showed that the culprit is the LVEN bit. For an
unclear reason, clearing the bit when disabling the LVDS encoder blocks
vertical blanking interrupts. We thus have to delay disabling the whole
LVDS encoder, not just disabling the PLL, until the DU is disabled.

We could split the LVDS disable sequence by clearing the LVRES bit in
the LVDS bridge atomic disable handler, and delaying the rest of the
operations, in order to disable the LVDS output at bridge atomic disable
time, before stopping the CRTC. This would make the code more complex,
without a clear benefit, so keep the implementation simple(r).

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

drm: rcar-du: lvds: Move LVDS enable code to separate code section

To prepare for a rework of the LVDS disable code, which will need to be
called from rcar_lvds_pclk_disable(), move the LVDS enable code,
currently stored in the __rcar_lvds_atomic_enable() function, to a
separate code section separate from bridge operations. It will be then
extended with the LVDS disable code.

As part of this rework the __rcar_lvds_atomic_enable() function is
renamed to rcar_lvds_enable() to more clearly indicate its purpose.

No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

drm: rcar-du: lvds: Call function directly instead of through pointer

When disabling the companion bridge in rcar_lvds_atomic_disable(),
there's no need to go through the bridge's operations to call
.atomic_disable(). Call rcar_lvds_atomic_disable() on the companion
directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

drm/i915: Add i915.enable_sagv modparam

Currently we have no sane way to forcibly disable SAGV, which
makes debugging things a PITA. Manually poking at the pcode
mailbox with it's various SAGV/QGV/PSF formats is no fun,
and likely to be clobbered by the driver anyway.

Let's add a modparam for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322181219.5511-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move PLANE_BUG_CFG bit definitions to the correct place

All other skl+ universal plane register bit definitions are next
to the pipe A register definition. Move the PLANE_BUF_CFG bit
definitions there as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-7-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/dpt: Add a modparam to disable DPT via the chicken bit

Add i915.enable_dpt modparam to allow disabling the DPT
usage in hardware via the chicken bit. Useful when debugging
potential DPT issues.

Quickly smoke tested on ADL.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

Merge tag 'drm-intel-next-2023-03-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Core Changes:
- drm: Add SDP Error Detection Configuration Register (Arun)

Driver Changes:
- Meteor Lake enabling and fixes (RK, Jose, Madhumitha)
- Lock the fbdev obj before vma pin (Tejas)
- DSC fixes (Stanislav)
- Fixes and clean-up on opregion code (Imre)
- More wm/vblank stuff (Ville)
- More general display code organization (Jani)
- DP Fixes (Stanislav, Ville)
- Introduce flags to ignore long HPD and link training issues \
  for handling spurious issues on CI (Vinod)
- Plane cleanups and extra registers (Ville)
- Update audio keepalive clock values (Clint)
- Rename find_section to bdb_find_section (Maarten)
- DP SDP CRC16 for 128b132b link layer (Arun)
- Fix various issues with noarm register writes (Ville)
- Fix a few TypeC / MST issues (Imre)
- Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj)
- Enable HDCP2.x via GSC CS (Suraj)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBy56qc9C00tCLOY@intel.com

Merge tag 'drm-misc-next-2023-03-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.4-rc1:

Core Changes:
- Add unit test for xrgb8888 to mono.
- Assorted small fixes to format helper selftests.
- Assorted documentation updates.
- Drop drm_dev_set_unique.
- Always use shadow buffer in generic fbdev emulation helpers, and
  improve error handling.

Driver Changes:
- Assorted small fixes to malidp, hdlcd, gma500, lima, bridge, rockchip.
- Move fbdev in gma500 to use drm_client.
- Convert bridge platform callbacks to void return.
- Drop leftover from vgem to shmem helper conversion.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a4c438e-7047-c044-fc77-5a3597000264@linux.intel.com

drm/i915: Add PLANE_CHICKEN registers

Define the PLANE_CHICKEN register offsets.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-5-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/dpt: Introduce HAS_DPT()

Replace the hand rolled DISPLAY_VER check for a more descriptive
HAS_DPT() macro. Will be used on more than one place later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/dpt: Only do the POT stride remap when using DPT

If we want to test with DPT disabled on ADL the POT stride remap
stuff needs to be disabled. Make it depend on actual DPT usage
instead of just assuming it based on the modifier.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/dpt: Treat the DPT BO as a framebuffer

Currently i915_gem_object_is_framebuffer() doesn't treat the
BO containing the framebuffer's DPT as a framebuffer itself.
This means eg. that the shrinker can evict the DPT BO while
leaving the actual FB BO bound, when the DPT is allocated
from regular shmem.

That causes an immediate oops during hibernate as we
try to rewrite the PTEs inside the already evicted
DPT obj.

TODO: presumably this might also be the reason for the
DPT related display faults under heavy memory pressure,
but I'm still not sure how that would happen as the object
should be pinned by intel_dpt_pin() while in active use by
the display engine...

Cc: stable@vger.kernel.org
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/mtl: Add HDCP GSC interface

MTL uses GSC command streamer i.e gsc cs to send HDCP/PXP commands
to GSC f/w. It requires to keep hdcp display driver
agnostic to content protection f/w (ME/GSC fw) in the form of
i915_hdcp_fw_ops generic ops.

Adding HDCP GSC CS interface by leveraging the i915_hdcp_fw_ops generic
ops instead of I915_HDCP_COMPONENT as integral part of i915.

Adding checks to see if GSC is loaded and proxy is setup

--v6
-dont change the license date in same patch series [Jani]
-fix the license year {Jani]

--v8
-remove stale comment [Ankit]
-get headers in alphabetical order [Ankit]
-fix hdcp2_supported check [Ankit]

--v9
-remove return statement from hdcp_gsc_fini [Ankit]

Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-7-suraj.kandpal@intel.com

drm/i915/mtl: Add function to send command to GSC CS

Add function that takes care of sending command to gsc cs. We start
of with allocation of memory for our command intel_hdcp_gsc_message that
contains gsc cs memory header as directed in specs followed by the
actual payload hdcp message that we want to send.
Spec states that we need to poll pending bit of response header around
20 times each try being 50ms apart hence adding that to current
gsc_msg_send function
Also we use the same function to take care of both sending and receiving
hence no separate function to get the response.

--v4
-Create common function to fill in gsc_mtl_header [Alan]
-define host session bitmask [Alan]

--v5
-use i915 directly instead of gt->i915 [Alan]
-No need to make fields NULL as we are already
using kzalloc [Alan]

--v8
-change mechanism to reuse the same memory for one hdcp session[Alan]
-fix header ordering
-add comments to explain flags and host session mask [Alan]

--v9
-remove gem obj from hdcp message as we can use
i915_vma_unpin_and_release [Alan]
-move hdcp message allocation and deallocation from hdcp2_enable and
hdcp2_disable to init and teardown of HDCP [Alan]

--v10
-remove unnecessary i915_vma_unpin [Alan]

--v11
-fix comment style [Uma]

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Pervin Teres <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-6-suraj.kandpal@intel.com

drm/i915/hdcp: Refactor HDCP API structures

It requires to move intel specific HDCP API structures to
i915_hdcp_interface.h from driver/misc/mei/hdcp/mei_hdcp.h
so that any content protection fw interfaces can use these
structures.

Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-5-suraj.kandpal@intel.com