boost: fix build when PARALLEL_MAKE is not set

It was passing "None" to bjam, which then parsed it as unknown build target.

(From OE-Core rev: 0a323abab1961caa334035f4f263f1787b3d7cc7)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libsdl2: add recipe

(From OE-Core rev: 41e0d3ed02017ad9d652275b7083b5b85cf49acc)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bc: add patch to fix segmentation fault

When run 'bc -l', it segmentation faults. Apply patch from BLFS to fix it.

Ref:
http://www.mail-archive.com/blfs-support@linuxfromscratch.org/msg04601.html

(From OE-Core rev: ae3158e0cfbfa1f1027976bff34ad502eeb28583)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman: fix systemd support for connman-* packages.

This patch fixes systemd's postinst/postrm script generation.

(From OE-Core rev: 657c7724966fdbd1236cb003419f01c885bcd570)

Signed-off-by: Yevhen Kyriukha <kirgene@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

directfb: add fusion patch for hangs

The following tests hang on exit:   direct_test, fusion_skirmish

(From OE-Core rev: 46b8009d668478c5ed3e8b64c65f1de2a4dc25b3)

Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

directfb: Upgrade to 1.6.3

Remove mesa patch as 1.6.3 provides compatibility with mesa

(From OE-Core rev: 00c078ff442676acf5f4653fe8c5ebf29de811a4)

Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mesa: enable additional drivers for gallium-llvm x86/x86-64

The additional Gallium drivers are needed for open source ATI Radeon
and NVIDIA graphics drivers.

The radeonsi and r600 drivers require LLVM 3.3 built with r600
PACKAGECONFIG so they must be explicitly enabled by adding r600 to the
mesa PACKAGECONFIG.

(From OE-Core rev: 1d08cef09cc7cbf682e8b372987fe4456961272b)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

builder: register directories with pcmanfm

Register directories to be opened with PCManFM
filemanager using xdg-open in Build Appliance.

(From OE-Core rev: 06d1e6db91497ad86803f9a5ed2346cd23cfa744)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-vesa: remove duplicate xf86driproto from DEPENDS

(From OE-Core rev: 34ada56cf08012ae59977a991025b18099d02fb3)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-intel: remove duplicate xf86driproto from DEPENDS

(From OE-Core rev: f2d3df7ccd8798ce40d95c9900039016c1276ce7)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gst-plugins-good: fix orc enabling via PACKAGECONFIG

An extra --disable-orc was being added to EXTRA_OECONF regardless of
whether orc was in PACKAGECONFIG, drop this.

(From OE-Core rev: 0fbb6b6a2bae4d5df21dc9606e7befeb6ad24429)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

texinfo: correct dont-depend-on-help2man.patch

Patch needed only with automake-1.13 no longer worked as expected
after texinfo has been updated to version 5.1.

(From OE-Core rev: abda8c052e2c4098c828671c9dd46993c1e81de2)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

shadow: backport a patch to make newgrp work

Backport a Debian patch to fix the reading of the
gshadow file in order to make newgrp work correctly.

(From OE-Core rev: 3ef8db6217f7c40a9eb063d21ce6f25b16d88d53)

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
[sgw - tweaked commit message]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

distro_features_check.bbclass: Allow checking of required/conflicting features

This add support to list required/confliting distro features for a
recipe; this avoids user mistake when building recipes/images which
would not work depending on DISTRO_FEATURES option set.

Adding:

,----[ Use example ]
| inherit distro_features_check
|
| REQUIRED_DISTRO_FEATURES = "x11"
| CONFLICT_DISTRO_FEATURES_mx6 = "wayland"
`----

In the image recipe allow us to make clear to user that this image
needs X11 and /cannot/ be build with Wayland support in i.MX6
platforms, for example.

(From OE-Core rev: a7519be6a23869ebafbf712370dab86ab92f68a5)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_ipk: Add support for PACKAGE_EXCLUDE

This uses the new --add-exclude arguments in opkg-cl, to list the excluded
packages.

If an excluded package is needed for the install to resolve,
an error will be generated.  Recommended packages will not
generate an error.

(From OE-Core rev: 6d7f5581bbfaf174edb77d92846e720e8057481c)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

opkg: Add support for excluding packages from the install

This adds a new argument to opkg-cl, --add-exclude, which is
used to add package names to the list of packages to exclude
from the install.

If an excluded package is needed for the install to resolve,
an error will be generated.  Recommended packages will not
generate an error.

(From OE-Core rev: 63c61b7c0c8aeb89661e3bb85e281dd1ef5b618c)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_ipk: Add support for NO_RECOMMENDATIONS

Uses the opkg --no-install-recommends option.

(From OE-Core rev: e36c9947c82be034133a27db6e0f7a769daeb185)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

opkg: Add --no-install-recommends option.

The new --no-install-recommends option is similar to the behavior of
apt-get's --no-install-recommedns.  Only required packages will be
installed.

(From OE-Core rev: 86a30a88cf89ed97c372c391169f4ae243c89fd2)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_deb: Add support for NO_RECOMMENDATIONS and PACKAGE_EXCLUDE

Add support for NO_RECOMMENDATIONS and PACKAGE_EXCLUDE.  Also add a
warning that ensures users know that BAD_RECOMMENDATIONS support is
not implemented in the debian package/rootfs classes.

(From OE-Core rev: 42b115b6d65c8205acb77b96db481f3e5172266b)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_deb.bbclass: Use the WORKDIR not SYSROOT for temp files

Previous debian APT configuration was using the sysroot directory.
This not only polluted the sysroot, but violates the expectation that
the sysroot is not modified by the rootfs installation.

(From OE-Core rev: 2db14eaa0fcc080bc20fa9da985ffc05c3b21e2a)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm.bbclass: NO_RECOMMENDATIONS support

Add NO_RECOMMENDATIONS support.  A way to disable all recommended
packages from being installed.  This will help shrink the size of
the resulting filesystem.

Add documentation on NO_RECOMMENDATIONS and BAD_RECOMMENDATIONS.

Note, using NO_RECOMMENDATIONS has side effects such that kernel-modules may
not have been installed.  A user will need to manually add to their image
any kernel-modules required to be on the image for functionality.

(From OE-Core rev: 0341bfa886ea851f5a394051545b4e624d8003dd)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-smartpm: Add support to disable installing recommends

In order to attempt to reduce image sizes by skipping recommended packages,
a new mode was added to smart that only evaluates required packaged.

(From OE-Core rev: 6fd8141bbdcd84c591149d84ad84effc2357de72)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm.bbclass: Add support for PACKAGE_EXCLUDE to RPM installs

Using the new smart exclude mechanism an error will be generated in the
excluded package is required for the image to be generated.

(From OE-Core rev: 238c46c03d0d9c35523c78b94bfebb57904bac5a)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-smartpm: Add support for excluding package from the install

Update smart to support a mechanism for excluding specific packages from the
install process.  An error will be generated if this package is required.

(From OE-Core rev: 87660d636c2ebe76cd9dff2a334f135def9a0cf3)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image.bbclass: Add basic support for PACKAGE_EXCLUDE

Add the foundation for the PACKAGE_EXCLUDE support.

As part of this work, it was noticed that the PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY were still using he 'normal' version for
dependencies.  This should no longer be necessary as of the change in the way
the complementary package groups (dev, dbg, ptest and others) are defined.
By making this change the dependency tree is more correct than before, and
gives the ability for manipulating PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY, while adjusting the dependencies at the same
time.

Warning messages will be generated if the user is trying to exclude a
package that was previously in the PACKAGE_INSTALL or
PACKAGE_INSTALL_ATTEMPTONLY variables.

(See additional commits for package manager specific support.)

Add documentation on PACKAGE_EXCLUDE and related variables.

(From OE-Core rev: 208d4d5ef7c5ead35dc27b7808f92ed377377aa4)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

busybox.inc: Avoid error when SYSLOG is not enabled

Add -f to rm of ${D}${sysconfdir}/syslog-startup.conf.${BPN} so as to
not error out when the busybox config used does not have SYSLOG enabled
and DISTRO_FEATURES does not contain sysvinit.

(From OE-Core rev: 4c5756149754d0b18b14595db335f8f5e14cc0a3)

Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: changes to image combo box from image configuration page

In some cases when a new machine is selected, the image combo
shows the same option. Fixed this issue, because the image
combo box should be reseted.

Fix the counter for the options in the combobox. This bug
was introduced by the templates functionality. The combo box had some
last changes, and I forgot about this counter.

[YOCTO #4858 & #5000]
(Bitbake rev: 457fd80ee6b1b2bcef463e3a83e048da2f8bf805)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: propertydialog.py : Scrollable windows for long tooltips

In some cases, the length of the description and the brought
in by field was too big. That led to the size of the property
dialog exceeding Hob's size. For long tooltips we use
scrollable windows now.

[HOB #4321]

(Bitbake rev: 78ecabf19bf01e5a662b6e2b865cd93bf47d962b)

Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: build.py: Provide useful diagnostics when exiting.

Running scripts with 'set -e' produces silent failures with no
diagnostic. Add an exit handler which produces diagnostics, including
details of what was running if the shell seems to be bash.

(Bitbake rev: e213e6a4c297a4f1c22eed15bd7b4cbc0e9eab4f)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

genext2fs: fix memory corruption on powerpc

    * fix memory corruption errors on powerpc64
    e.g.
    |$ genext2fs -b 30000 -d . -i 8192 /tmp/tstrootfs
    |  Segmentation fault

(From OE-Core rev: d98f08a7ad95d0b17846276b028a6614f16b6846)

Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-dtb.inc: Fix dtb generation for kernels newer than 3.8

The 3.8 kernel has change the default directory where the dtb file is
stored. The change has been done at:

,----[ Quote of 3.8 kernel change ]
| commit 499cd8298628eeabf0eb5eb6525d4faa0eec80d8
| Author: Grant Likely <grant.likely@secretlab.ca>
| Date:   Tue Nov 27 16:29:11 2012 -0700
|
|     ARM: dt: change .dtb build rules to build in dts directory
|
|     The current rules have the .dtb files build in a different directory
|     from the .dts files. The only reason for this is that it was what
|     PowerPC has done historically. This patch changes ARM to use the generic
|     dtb rule which builds .dtb files in the same directory as the source .dts.
|
|     Cc: Russell King <linux@arm.linux.org.uk>
|     Cc: Arnd Bergmann <arnd@arndb.de>
|     Acked-by: Olof Johansson <olof@lixom.net>
|     Cc: linux-arm-kernel@lists.infradead.org
|     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|     [swarren: added rm command for old stale .dtb files]
|     Signed-off-by: Stephen Warren <swarren@nvidia.com>
|     Signed-off-by: Rob Herring <rob.herring@calxeda.com>
`----

This change adds support for both places to backward and forward
compatibility.

(From OE-Core rev: 0ec3710b8dcae311e8d9d676d5f1c6843a81383b)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

coreutils: allow for acl support

CQID: 430353

Define PACKAGECONFIG info for acl assuming it
might be a DISTRO_FEATURE.

(From OE-Core rev: a8455a13554088613d4576a74b19294a8b49ff88)

Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

coreutils: add PACKAGECONFIG info for acl support

Updates GPLv2 version of coreutils.  They also want
patches for other packages that might use acl.

CQID: 430353

Add configuration data to enable acl support if
it is a distro feature.

(From OE-Core rev: 8030fdc198c1037ae458899eebd14a4fae04c49a)

Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

initscripts: remove obsolete device_table.txt

device_table.txt was once used by an init script named 'devices' to
create the basic files under /dev. However, it's no longer used now.
The devices init script has been removed, and makedevs command has been
disabled by default in busybox.

Besides, considering the device managers and devtmpfs filesystem, this
file is not likely to be used again. So we remove it.

(From OE-Core rev: cc3842255ade0ad6fb312f06f5e5e1edd9767c94)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

init-install.sh: fix to handle the boot partition correctly

Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.

Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.

[YOCTO #5018]

(From OE-Core rev: aa67b1333b4774e1845f562085f7048df65a644f)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

init-install.sh: improve hard drive searching process

Previously, only unremovable hard drives are searched and are treated
as candidates of target disks to intall into.

However, it's possible that we're going to install the live image into
a removable media such as an USB. This patch enables this possibility.

In addition, this patch presents more information about the hard drives
so that user may have more knowledge about which hard drive they are
going to install their image into.

[YOCTO #5018]

(From OE-Core rev: 358f0584d779825307eec08c023b5ff14e72cf9e)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tslib: update to 1.1

Drop patches merged upstream. 32bitBE-support.patch wasn't merged, but
no longer applies and similar changes look to have been made; tslib 1.1
works properly on qemumips without it, so this has also been dropped.

(From OE-Core rev: 2e92d845b433f3a1805c310ccda54cfc7dd8b1e1)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

default-distrovars.inc: Add 'DISTRO_FEATURES_DEFAULT' variable

When making distributions based on the default distro-less config, it
is useful to be able to reuse the default DISTRO_FEATURES options
without the need of duplication. The new variable,
DISTRO_FEATURES_DEFAULT, allow this reuse and customization.

So distros can include 'default-distrovars.inc' and use:

,----[ Use example ]
| DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} myfeature"
`----

(From OE-Core rev: 660ec04786162ff7f40aa78eb154dc4b5bf6ed9f)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

useradd.bbclass: add missing functions to preinst

The preinst scripts are calling bbnote, bbwarn and bbfatal functions,
but these functions are not written to the preinst scripts.

This patch writes these missing functions to the preinst scripts to
avoid the 'not found' errors.

(From OE-Core rev: ed45f00ef76d189611cda2cb922fa7eb8f86d9cc)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gettext: update to upstream version 0.18.3

(From OE-Core rev: 5487373672c55d87fbe90117c802d26d99099d03)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+: update to upstream version 2.24.20

(From OE-Core rev: 176e5c5bfdeb2529cc40e35870ac49d75439dfeb)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-2.0: update to upstream version 2.36.4

(From OE-Core rev: 8414bb5a7f2780fc067f1fdc30a56b568cbb7d82)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

curl: update to upstream version 7.32.0

(From OE-Core rev: 4ec7eeea49be0bddb688b5bda5d423c4c7f4695d)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pixman: update to upstream version 0.30.2

(From OE-Core rev: 054db541535967e573f59e32f5b8e2387020231f)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-2.0: use trim_version() to get the source directory

(From OE-Core rev: 0c510da33a0a1a7b0bee8ce9caaf028e1235c291)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

hello-mod: Add comment for kernel module package naming

modules bbclass renames kernel module packages with "kernel-module-" prefix
automatically.

(From OE-Core rev: 6640f312062ad6648459f0b75086e9a8614300a9)

Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Revert "hello-mod: Ensure the produced package name begins with kernel-module-"

[YOCTO #4286]

The package runtime mapping rename issue is already fixed by
commit 0bc564af07c1bae8112f834a60aea3b72af7de13, the "kernel-module-" workaround
is not necessary anymore for out-of-tree module package, so revert that commit.

This reverts commit 71aafc214fe407b7620e747c11dfb8326c867b1c.

(From OE-Core rev: b0676d2ffceec3027aee8d2d450ae6318085341e)

Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

texinfo: handle correctly @enumerate specification greater than 10

Backport the patch to fix the error when @enumerate is greater than 10:
mpatrol.texi:6356: bad argument to @enumerate

(From OE-Core rev: 9dca06b16fc10743ed879221fadb836733a9332c)

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

uclibc: Upgrade to latest on git

It brings fixes needed for python3 to work on uclibc/64bit targets

(From OE-Core rev: 01777e78639888d437b103ebafefccd932631bfd)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

prelink: update to latest cross-prelink

Sync to latest cross-prelink, as of Aug 1, 2013.

Drop the PR number, no longer needed.

(From OE-Core rev: b59d256349cc0ac19357158be8e63bd52ab9fb51)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemuppc: Change default tune to 74xx

We use mac99 as platform for qemuppc
lets choose a tuning thats appropriate for it

(From OE-Core rev: 9b5572b8014f23747f18a7e0ca30c7094c524920)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tune-ppc7400.inc: Add tune file

This is appropriate tune for mac99/g4 platform
that we use for emulating qemuppc

(From OE-Core rev: af10ecb57a5eb12c65975043d419f7506ef89b99)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto-3.8/meta: enable ALTIVEC for qemuppc

As part of the qemuppc tuning activities, we are aligning on ppc74xx, and
as a result we can enable ALTIVEC support in the base BSP config.

[YOCTO #1914]

(From OE-Core rev: 81c5c93fb0589dc24c10a4d3722da72d4774db22)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto-3.8/meta: update drm and intel power management settings

Updating the meta branch SRCREV to import the following config
changes:

  f706bd4 drm-emgd.cfg: convert some config options from y to m
  5995fa5 meta: features/power/intel.cfg

(From OE-Core rev: 1c9703c9e8b79f5c225c585c154416c1e7e6899f)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cronie: fix out of tree build

(From OE-Core rev: fd9e591f266e1a6c183e77f24e50d31e0d52bdd5)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu: Fix bit extraction for MTFSFI and MTFSF

Power ISA 2.05 enhancements introduced regression
in mtfsfi implementation. Fixed thusly

[YOCTO #4854]

(From OE-Core rev: b8952942aed77473d3b44a17112cbf6a9e83eff3)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

buildhistory-collect-srcrevs: match new buildhistory-diff command line parsing

* Default buildhistory directory to buildhistory/ under the current
  directory and require an option to set it
* Show a description in the help output

(From OE-Core rev: 64aa7d0b53f6ad45ab1a2121e917d7a512097407)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

buildhistory-diff: improve command-line handling

Improve command-line argument handling of buildhistory-diff to make it
easier to use.

* Default buildhistory directory to buildhistory/ under the current
  directory and require an option to set it (since most users will
  likely run buildhistory-diff from the build directory and keep
  BUILDHISTORY_DIR at its default location)
* Default from-revision to "build-minus-1" to get the difference from
  the previous build with no arguments
* Allow from/to revisions to be specified by from..to (since git accepts
  this form).

(From OE-Core rev: 5e2be70e89820ffc74208d225fe4414fe5182050)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/buildhistory: avoid mangling names in dot graphs for images

We were mangling names here to avoid characters that are invalid for dot
node names, but if you just quote all names that isn't necessary and we
retain the original naming, allowing easy searching of the graph files.

(From OE-Core rev: 99efdad886aa5063a68912846c00a46ba9b15536)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/buildhistory: tag last 3 build revisions

This makes it easier to obtain the difference from the last three
builds particularly where a single build might account for more than one
commit in the buildhistory git repository (e.g. if package and image
changes occurred).

(From OE-Core rev: 9512f3787295d662678c2943da31197c8df39e99)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/buildhistory: show command line in commit message

Record the bitbake command line in the commit message as a further
context indication.

(From OE-Core rev: 34fb802b2170f0fe208e54e7a4d18f663db72f90)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/buildhistory: record size of installed package not compressed archive

* usually it's more important to know how much space will each
  package take on target device then size of compressed package
* example for libewebkit0 with 4 different architectures, interesting
  that om_gta02 .ipk is bigger but it's smaller when installed

  before:
  MACHINE     DEFAULTTUNE       SIZE (.ipk file)
  om_gta04    cortexa8t-neon    15996 KiB libewebkit0
  qemux86_64  x86-64            16992 KiB libewebkit0
  spitz       xscale            16148 KiB libewebkit0
  om_gta02    arm920t           16260 KiB libewebkit0

  after:
  MACHINE     DEFAULTTUNE       SIZE (installed)
  om_gta04    cortexa8t-neon    60544 KiB libewebkit0
  qemux86_64  x86-64            63720 KiB libewebkit0
  spitz       xscale            60588 KiB libewebkit0
  om_gta02    arm920t           56268 KiB libewebkit0

(From OE-Core rev: 85e4a77138381a6086d5ebd3a28cb5a94bc26a19)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/buildhistory: remove default of BUILDHISTORY_CHECKVERBACKWARDS

Since this variable is no longer used, we don't need to set a default
for it.

(From OE-Core rev: a5230835c539781b5b035dc6d0be3cac5a5bd305)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cronie: upgrade to 1.4.11

LIC_FILES_CHKSUM changed because cron.h doesn't exist anymore.
Replaced it with cron.c.

(From OE-Core rev: c1f3eabece0bb998c46367c06e3433696f97225c)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sudo: upgrade to 1.8.7

Removed a patch because the changes were merged upstream.
Also, the license had some modifications in two files.

(From OE-Core rev: 13ba4490f6422109f934ed36809bd52d44577574)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob/retrieveimagedialog: change labels

Some labels needed to be changed in order to respect the convention.

[YOCTO #4999]
(Bitbake rev: 110b485eac6adea242297b7942da8710403c465a)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: taskdata: report close matches with NoProvider errors

Assuming there is no known reason why an item is not provided, show
close matches on the assumption that it might have been a typo or
other mistake.

(Bitbake rev: ed81b0856b4a3892b53d39871eaaa6273390ea75)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: runqueue: report close matches for an invalid task name

Help to pick up mistakes such as "bitbake -c cleanstate xyz" (instead
of "bitbake -c cleansstate xyz".)

(Bitbake rev: 15c3db1cffdffd85641c6b12e77f19ce7a553472)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

texinfo: add perl RDEPENDS and fix up packaging

This new version of texinfo uses perl for the conversion process.

The perl modules are installed in ${datadir}/texinfo which was getting
pulled into the -doc package, since FILE_${PN} is a full override, add
it back.

(From OE-Core rev: f0b6734182a5505fad7d26bc67a2141e51bc7a9d)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

openssh: fix for read-only rootfs

If the rootfs is read-only and the ssh keys are not available at system
start-up, the init script will generate ssh keys into /etc/ssh, thus
causing a 'read-only file system' error.

In order for Yocto based image to work correctly for read-only rootfs,
we use the following logic for openssh.

If the rootfs is read-only and there are pre-generated keys under /etc/ssh,
we use the pre-generated keys. Note the pre-generated keys are mainly for
debugging or development purpose.
If the rootfs is read-only and there are no pre-generated keys under
/etc/ssh, we use /var/run/ssh as the location for ssh keys. That is, at
system boot-up, the generated ssh keys will put into /var/run/ssh.

[YOCTO #4887]

(From OE-Core rev: 2ed44745024f04aa4e00ddba3009153c6b47c8e9)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

irda-utils: fix for read-only rootfs

The init script for irda writes configuration items to /etc/sysconfig/irda
if that file is not available in system. But it's actually not necessary,
the behavior doesn't change whether the init script writes to the file or not.

Considering it issues error messages in case of a read-only rootfs, I delete
the writing process.

[YOCTO #4103]
[YOCTO #4886]

(From OE-Core rev: f88a101bc0caa7b486527f0d337406651cbaeb0d)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate-volatile.sh: use 'cp -a' to avoid potential problem

Previously, dead links in target directory will not be copied.
This is incorrect as dead links are not uncommon in our rootfs.
So we use '-a' option instead.

(From OE-Core rev: 742440441222e0627abbdd3eb2ee16401e8f4adf)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqemu-internal: fix to start X correctly in live images

The QEMUOPTIONS for ISOFS was not complete, leading to failures when
trying to start X in live images.

This patch fixes this problem.

[YOCTO #4103]
[YOCTO #4884]

(From OE-Core rev: 08947869917dc5a9dfff05b0ee19279f60cf6d2b)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate-volatile.sh: don't spawn background process at rootfs time

If we're building a read-only rootfs, we'll get the following error now
and then.

    tar: .: file changed as we read it

The root cause is that we spawn background process at rootfs time.
When the tar command is running, it's possible that files under rootfs
are changed by background processes, thus this error.

[YOCTO #4937]

(From OE-Core rev: 4bd419f95868d5b8707a45cee5f6c5c6a840a65b)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate-volatile.sh: use $ROOT_DIR/var/volatile/tmp as TMPDIR

It's possible that a 'No such directory' error occurs when doing
check_requirement in populate-volatile.sh at rootfs time. This is
because the $ROOT_DIR/var/tmp might be a dead link.

Use $ROOT_DIR/var/volatile/tmp as the TMPDIR instead to avoid this
error.

[YOCTO #4883]
[YOCTO #4103]

(From OE-Core rev: 7c2c36a97bab46c73a3a1fb743ad3ec67a4c072e)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

udev: remove implicit dependency on initscripts

At some point, the udev was modified to source the functions from
initscripts or lsbinitscripts. This dependency is actually not needed.
If we use udev in a system where initscripts from oe-core is not available,
there will be errors.

This patch fixes this problem by removing the implicit dependency.

[YOCTO #4882]
[YOCTO #4103]

(From OE-Core rev: 72d6825c24f4c3e4a7a907cf0a09e2e8f7720ae8)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

init-live.sh: make $ROOT_MOUNT/media writable when necessary

If the live image is mounted as read-only, we cannot make necessary
directories under $ROOT_MOUNT/media, so trying to move the mount points
lead to errors.

So in case that no unification filesystem mechanism is available in kernel
and the rootfs is mounted as read-only, we mount tmpfs on $ROOT_MOUNT/media
so that it's possible to make necessary directories under it.

[YOCTO #4881]
[YOCTO #4103]

(From OE-Core rev: aeeb3418ff08dfd29edc0ce8a41cb6887d4e11fe)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

device_table-minimal.txt: use user/group names instead of uid/gid

Instead of hard coding the uid/gid, we prefer the way of using user/group
names.

Note the way of using uid/gid is still supported.

[YOCTO #1159]

(From OE-Core rev: c5ef0294a9b8d178896a47c9f5d6e3dd6797e343)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image.bbclass: create device table after package installation

Now that the makedevs supports using user/group names in the devcie
table files, and it uses passwd and group files under the rootfs which
is provided by the base-passwd package, we should let package installation
finish first, so that makedevs can get a correct mapping from user/group
names to uid/gid.

The check for existence of ${IMAGE_ROOTFS}/dev is removed. This is because
do_rootfs doesn't have 'nostamp' flag any more, so the do_rootfs task will
not be rerun for every build. Checking for the existence of ${IMAGE_ROOTFS}/dev
is not necessary any more. Besides, as base-files package also installs the
/dev directory, this checking does not serve as a good criteria.

[YOCTO #1159]

(From OE-Core rev: d073ca77ba886c7912abd3ec0640881c00aea3bb)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

makedevs: support using user/group names in device table files

Compared to hard coding the numeric group and user ids in the device
table files, the way of using user/group names is preferred.

This patch adds the ability to makedevs to correctly deal with device
table files with user/group names in them.

To maintain backward compatibility, the way of using uid/gid is still
supported.

[YOCTO #1159]

(From OE-Core rev: 1fcf718e3a1e50446ab61972069566e5016bc625)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wipe-sysroots: don't assume TMPDIR is under BUILDDIR

The previous code used the environment variable BUILDDIR and assumed that TMPDIR
was a subdirectory. This often isn't the case, so instead ask bitbake where the
directories we're about to delete are.

(From OE-Core rev: 29491a72acac81ebb7e9ecfbc9392fbeb9a7ea26)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu, default-providers: Add mesa as default virtual/egl

* it's safer to select it consistently with virtual/libgl* providers

(From OE-Core rev: d9321da1bf01175a9e3721607df31055e3765bc6)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cmake.bbclass: Don't use packages from the native build machine

(From OE-Core rev: 044037d8add3556a90ac4da5991e1e5975d62e25)

Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

matchbox-wm: fix icon handling on 64-bit hosts

Xlib has a historical quirk where 32-bit values are returned in longs (but
always hidden through a cast).  On 32-bit machines this doesn't matter but on
64-bit this leads to problems.  Bump SRCREV to integrate a fix from upstream.

Also, drop the conditional configure_fix.patch, it was integrated long ago.

[ YOCTO #4917 ]

(From OE-Core rev: 09c609afbfb6e9a2504166d0fe8c7ae3d8ae9ebd)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libmatchbox: upgrade to 1.11

Remove check.m4 as libmatchbox uses the check.pc instead of a m4 file now.

(From OE-Core rev: 4f51bf23346947cd47e7ac9e1290e799f3c20708)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xrestop: add dependency on ncurses

* fails without it
  | xrestop.c:50:20: fatal error: curses.h: No such file or directory
  |  #include <curses.h>
  |                     ^
  | compilation terminated.

(From OE-Core rev: c709fcd7e5f81707ece5f7d085c8c43eed165f7e)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xeyes: add dependency on libxrender

* fails without:
  | configure:10604: error: Package requirements (xrender >= 0.4) were not met:
  | No package 'xrender' found

(From OE-Core rev: ceb69dce2cff26153c6e17614a934b9fa8f9f2a5)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gst-plugins-gl: add dependency on glew

* fails without:
  | ./gstglshader.h:30:21: fatal error: GL/glew.h: No such file or directory

(From OE-Core rev: a3c58aaeb84c711431e78458afabed2f7054d937)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

at-spi2-core: add intltool-native dependency

* configure fails without it
  at-spi2-core/2.8.0-r0/temp/run.do_configure.372: intltoolize: not found

(From OE-Core rev: 483abbe91c1320d6c6e3e7a5824de80e427aa50e)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nfs-utils: Replace spaces with tabs in shell function

As per OE-Core convention, indentation should be TAB for shell.

(From OE-Core rev: 91b6d2cf08c5c6ad58f0f9a85a3536a9034342b8)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rpcbind: Replace spaces with tabs in shell function

As per OE-Core convention, indentation should be TAB for shell.

(From OE-Core rev: a92376f2daf10baf45d99a3de9502b52cbce8b7e)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lighttpd: Replace spaces with tabs in shell function

As per OE-Core convention, indentation should be TAB for shell.

(From OE-Core rev: d73a0d00554cc197d2eb7e95432252af267d7bca)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

opkg.inc: remove the obsolete POSTLOG variable

With the current implementation of postinst logging mechanism, the
location for log file is configured via the POSTINST_LOGFILE variable.

The POSTLOG variable is obsolete now, thus removing it.

(From OE-Core rev: 6aaf2d5c51eb4ee6acbb85fd4aa5f44406907bc2)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cogl: GL/GLX feature cleanup

Separate GL and GLX flags don't make sense, as on Linux GL means GLX and GLX
means GL.

So, default to GLESv2 and GLX if X11 is enabled.  EGL on X11 doesn't have
feature parity yet so leave it disabled by default.

(From OE-Core rev: e5f8f6c6191505d731c4672353e811d6729d424a)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-dtb: Use kernel build system to generate the dtb files

As the Linux kernel, unconditionally, builds the dtc application and
it is the compatible version with the DeviceTree files shipped within
the kernel it is better to use it and the kernel build system to
generate the dtb files.

Some DeviceTree files rely on CPP and kernel headers to be able to
generate the dtb binary contents and it is harder to replicate it
outside of Linux kernel build system so we /use/ it.

To comply with these assumptions we need to use the dtb file when
calling 'make' instead of pointing to the DeviceTree source file; the
code has been made backward compatible but it is advised to move to
the new definition to avoid warnings as:

,----[ Original definition ]
| KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabresd.dts"
`----

Becomes:

,----[ New definition ]
| KERNEL_DEVICETREE = "imx6q-sabresd.dtb"
`----

(From OE-Core rev: 72980d5bb465f0640ed451d1ebb9c5d2a210ad0c)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemtap: upgrade to 2.3

Disabled javac and jar.

(From OE-Core rev: 0308bf2619734f07814f55c0adae17937f77afbd)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

meta-skeleton: layer.conf Should also have .bbappend in example

This will allow for an example recipe with a .bbappend, such as
busybox or kernel configure fragments.

(From OE-Core rev: 2a2a2540b37880cdd866f01d8e4077cbd0378749)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

meta-skeleton: Add busybox config fragment example

This shows an example of the config fragment support that
both the linux-yocto and busybox recipes use. This example
is specific to busybox.

By adding busybox CONFIG options into a .cfg file and then
adding that .cfg file to SRC_URI the merge_config.sh script will
correctly handle these CONFIG options during the do_configure task.
The merge_config.sh script uses a last-in wins method.

For more details about this, see the Kernel Development Manual Section 2.2.3
http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.html#changing-the-configuration

(From OE-Core rev: 57662d4f813d5795cac1529633db80a09efdb089)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu: Skip it for mips64 target

We should not skip it always since same recipes provide
qemu-native too so user class-target override to make it
only skip for target recipes

(From OE-Core rev: 23d633cc65cf31486263f120c71df82186cfdd22)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dpkg: fix include header caused compile error

Build dpkg-native on Fedora 19, it fails with:

/usr/include/c++/4.8.1/cstdlib: In function ‘long long int std::abs(long long int)’:
/usr/include/c++/4.8.1/cstdlib:174:20: error: declaration of C function ‘long long int std::abs(long long int)’ conflicts with
   abs(long long __x) { return __builtin_llabs (__x); }
                    ^
/usr/include/c++/4.8.1/cstdlib:166:3: error: previous declaration ‘long int std::abs(long int)’ here
   abs(long __i) { return __builtin_labs(__i); }
   ^

That because header cstdlib is included in a 'extern "C"' block that gcc
4.8 doesn't support. Fix it by move the header file out of the 'extern "C"'
block.

(From OE-Core rev: 7de61ecc3efc43c625dde9a66f5c05e980a82e34)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>