review.tizen.org Git - platform/kernel/linux-rpi.git/log

ath11k: Avoid race during regd updates

Whenever ath11k is bootup with a user country already set, cfg80211
notifies this country info to ath11k soon after registration, where the
notification is sent to the firmware for fetching the rules of this user
country input.

Multiple race conditions could be seen in this scenario where a new
request is either lost as pointed in [1] or a new regd overwrites the
default regd provided by the firmware during bootup. Note that, the
default regd is used for intersection purpose and hence it should not be
overwritten.

The main reason as pointed by [1] is the usage of ATH11K_FLAG_REGISTERED
flag which is updated after completion of core registration, whereas the
reg notification from cfg80211 and wmi events for the corresponding
request can happen much before that. Since the ATH11K_FLAG_REGISTERED is
currently used to determine if the event containing reg rules belong to
default regd or for user request, there is a possibility of the default
regd getting overwritten.

Since the default reg rules will be received only once per pdev on
firmware load, the above flag based check can be replaced with a check
to see if default_regd is already set, so that we can now always update
the new_regd. Also if the new_regd is set, this will be always used to
update the reg rules for the registered phy.

[1] https://patchwork.kernel.org/project/linux-wireless/patch/1829665.1PRlr7bOQj@ripper/

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-4-jouni@codeaurora.org

ath11k: Avoid reg rules update during firmware recovery

During firmware recovery, the default reg rules which are
received via WMI_REG_CHAN_LIST_CC_EVENT can overwrite
the currently configured user regd.

See below snap for example,

root@OpenWrt:/# iw reg get | grep country
country FR: DFS-ETSI
country FR: DFS-ETSI
country FR: DFS-ETSI
country FR: DFS-ETSI

root@OpenWrt:/# echo assert > /sys/kernel/debug/ath11k/ipq8074\ hw2.0/simulate_f
w_crash
<snip>
[ 5290.471696] ath11k c000000.wifi1: pdev 1 successfully recovered

root@OpenWrt:/# iw reg get | grep country
country FR: DFS-ETSI
country US: DFS-FCC
country US: DFS-FCC
country US: DFS-FCC

In the above, the user configured country 'FR' is overwritten
when the rules of default country 'US' are received and updated during
recovery. Hence avoid processing of these rules in general
during firmware recovery as they have been already applied during
driver registration or after last set user country is configured.

This scenario applies for both AP and STA devices basically because
cfg80211 is not aware of the recovery and only the driver recovers, but
changing or resetting of the reg domain during recovery is not needed so
as to continue with the configured regdomain currently in use.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-3-jouni@codeaurora.org

ath11k: Update pdev tx and rx firmware stats

Update the fields of pdev tx and tx firmware stats structure.
Missing fields resulted in wrong fw stats to be displayed as below.

root@OpenWrt:/# cat /sys/kernel/debug/ath11k/
ipq8074\ hw2.0/mac0/fw_stats/pdev_stats | grep Illegal
Illegal rate phy errors 36839112

Note that this struct was missing its members from initial driver
support and this change doesn't introduce/modify the structure for
firmware changes.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-2-jouni@codeaurora.org

ath11k: Fix pktlog lite rx events

Fix sending rx_buf_sz to ath11k_dp_tx_htt_rx_filter_setup()
to enable pktlog full or lite mode. Depending on mode update the
trace buffer with log type full/lite.

Pktlog lite is a lighter version of pktlog. This can be used to capture
PPDU stats. These are useful for firmware performance debugging.

pktlog lite dumps are enabled using,
echo "0x0 1" > ath11k/IPQ8074 hw2.0/mac0/pktlog_filter

Tested On: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01233-QCAHKSWPL_SILICONZ-1 v2

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-1-jouni@codeaurora.org

ath11k: Add support for RX decapsulation offload

Add support for rx decapsulation offload by advertising
the support to mac80211 during registration. Also ensure
the frames have the RX_FLAG_8023 flag set in decap offload
frames before passing to mac80211.

Since the packets delivered to the driver are in 802.3 format, these
can be sent to the network core with minimal processing in mac80211.
This helps in releasing some CPU cycles in the host processor and
thereby improving the performance.

Two exceptions are made before passing decap frames, one is
for EAPOL packets since mac80211 8023 fast rx for the sta
is set only after authorization, other case is for multicast
packets to validate PN in mac80211. In both the cases the
decap frames are converted to 80211 frame and sent to mac80211.

Ethernet decap can be enabled by using frame_mode modparam:

insmod ath11k frame_mode=2

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00844-QCAHKSWPL_SILICONZ-1 v2

Co-developed-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721204217.120572-1-jouni@codeaurora.org

ath11k: fix some sleeping in atomic bugs

The ath11k_dbring_bufs_replenish() and ath11k_dbring_fill_bufs()
take a "gfp" parameter but they since they take spinlocks, the
allocations they do have to be atomic. This causes a bug because
ath11k_dbring_buf_setup passes GFP_KERNEL for the gfp flags.

The fix is to use GFP_ATOMIC and remove the unused parameters.

Fixes: bd6478559e27 ("ath11k: Add direct buffer ring support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210812070434.GE31863@kili

ath11k: qmi: avoid error messages when dma allocation fails

qmi tries to allocate a large contiguous dma memory at first,
on the AMD Ryzen platform it fails, then retries with small slices.
So set flag GFP_NOWARN to avoid flooding dmesg.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210823063258.37747-1-aaron.ma@canonical.com

ath11k: Replace one-element array with flexible-array member

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Refactor the code a bit according to the use of a flexible-array member in
struct scan_chan_list_params instead of a one-element array, and use the
struct_size() helper.

Also, save 25 (too many) bytes that were being allocated:

$ pahole -C channel_param drivers/net/wireless/ath/ath11k/reg.o
struct channel_param {
u8                         chan_id;              /*     0     1 */
u8                         pwr;                  /*     1     1 */
u32                        mhz;                  /*     2     4 */

/* Bitfield combined with next fields */

u32                        half_rate:1;          /*     4:16  4 */
u32                        quarter_rate:1;       /*     4:17  4 */
u32                        dfs_set:1;            /*     4:18  4 */
u32                        dfs_set_cfreq2:1;     /*     4:19  4 */
u32                        is_chan_passive:1;    /*     4:20  4 */
u32                        allow_ht:1;           /*     4:21  4 */
u32                        allow_vht:1;          /*     4:22  4 */
u32                        allow_he:1;           /*     4:23  4 */
u32                        set_agile:1;          /*     4:24  4 */
u32                        psc_channel:1;        /*     4:25  4 */

/* XXX 6 bits hole, try to pack */

u32                        phy_mode;             /*     8     4 */
u32                        cfreq1;               /*    12     4 */
u32                        cfreq2;               /*    16     4 */
char                       maxpower;             /*    20     1 */
char                       minpower;             /*    21     1 */
char                       maxregpower;          /*    22     1 */
u8                         antennamax;           /*    23     1 */
u8                         reg_class_id;         /*    24     1 */

/* size: 25, cachelines: 1, members: 21 */
/* sum members: 23 */
/* sum bitfield members: 10 bits, bit holes: 1, sum bit holes: 6 bits */
/* last cacheline: 25 bytes */
} __attribute__((__packed__));

as previously, sizeof(struct scan_chan_list_params) was 32 bytes:

$ pahole -C scan_chan_list_params drivers/net/wireless/ath/ath11k/reg.o
struct scan_chan_list_params {
u32                        pdev_id;              /*     0     4 */
u16                        nallchans;            /*     4     2 */
struct channel_param       ch_param[1];          /*     6    25 */

/* size: 32, cachelines: 1, members: 3 */
/* padding: 1 */
/* last cacheline: 32 bytes */
};

and now with the flexible array transformation it is just 8 bytes:

$ pahole -C scan_chan_list_params drivers/net/wireless/ath/ath11k/reg.o
struct scan_chan_list_params {
u32                        pdev_id;              /*     0     4 */
u16                        nallchans;            /*     4     2 */
struct channel_param       ch_param[];           /*     6     0 */

/* size: 8, cachelines: 1, members: 3 */
/* padding: 2 */
/* last cacheline: 8 bytes */
};

This helps with the ongoing efforts to globally enable -Warray-bounds and
get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().

This issue was found with the help of Coccinelle and audited and fixed,
manually.

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210823172159.GA25800@embeddedor

ath11k: add caldata download support from EEPROM

Firmware updates EEPROM support capability in QMI FW caps, send QMI BDF
download request message with file type EEPROM, to get caldata download
from EEPROM. Firmware takes more time to update cal data from EEPROM, so
increase QMI timeout.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721201927.100369-5-jouni@codeaurora.org

ath11k: add caldata file for multiple radios

If multiple PCI cards are attached, each needs its own caldata file.

Added new Caldata file name,
PCI Bus:
cal-pci-0001:01:00.0.bin
cal-pci-0000:01:00.0.bin
AHB Bus:
cal-ahb-c000000.wifi1.bin

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721201927.100369-4-jouni@codeaurora.org

ath11k: clean up BDF download functions

In current code, AHB/PCI uses two separate functions to download
BDF file. Refactor code and make a common function to send QMI BDF
download request for both AHB and PCI devices. This patch has no
functional change.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721201927.100369-3-jouni@codeaurora.org

ath11k: use hw_params to access board_size and cal_offset

Reuse board_size from hw_params, add cal_offset to hw params.
This patch is clean up only, there is no change in functionality.

cal_size was unused, so remove that.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721201927.100369-2-jouni@codeaurora.org

ath11k: Wstringop-overread warning

gcc-11 with the kernel address sanitizer prints a warning for this
driver:

In function 'ath11k_peer_assoc_h_vht',
    inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:1632:2:
drivers/net/wireless/ath/ath11k/mac.c:1164:13: error: 'ath11k_peer_assoc_h_vht_masked' reading 16 bytes from a region of size 4 [-Werror=stringop-overread]
1164 |         if (ath11k_peer_assoc_h_vht_masked(vht_mcs_mask))
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath11k/mac.c: In function 'ath11k_peer_assoc_prepare':
drivers/net/wireless/ath/ath11k/mac.c:1164:13: note: referencing argument 1 of type 'const u16 *' {aka 'const short unsigned int *'}
drivers/net/wireless/ath/ath11k/mac.c:969:1: note: in a call to function 'ath11k_peer_assoc_h_vht_masked'
  969 | ath11k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

According to analysis from gcc developers, this is a glitch in the
way gcc tracks the size of struct members. This should really get
fixed in gcc, but it's also easy to work around this instance
by changing the function prototype to no include the length of
the array.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99673
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210322160253.4032422-5-arnd@kernel.org

ath11k: Add spectral scan support for QCN9074

Populate the below hw parameters as per the QCN9074 support
1. FFT bin size as two bytes
2. Maximum FFT bin count as 1024
3. Summary report pad size as 16
4. FFT report header length as 24

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721180809.90960-5-jouni@codeaurora.org

ath11k: Fix the spectral minimum FFT bin count

User was not able to configure the spectral with the FFT bin count 32.
In all supported platforms, the expected minimum FFT bin count is 32 but
it was wrongly defined as 64. This restrict the user to not configure
down to the actually supported minimum FFT bin count. So update the
minimum FFT bin count as 32.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721180809.90960-4-jouni@codeaurora.org

ath11k: Introduce spectral hw configurable param

Below parameters have been identified as configurable across the platforms.
So to scale the spectral across the platforms, move these parameter
into hw param.

1. Maximum FFT bins
2. Summary report pad size
3. FFT report header length

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721180809.90960-3-jouni@codeaurora.org

ath11k: Refactor spectral FFT bin size

In IPQ8074, actual FFT bin size is two bytes but hardware reports it
with extra pad size of two bytes for each FFT bin. So finally each FFT
bin advertise as four bytes size in the collected data. This FFT pad is
not advertised in IPQ6018 platform. To accommodate this different
behavior across the platforms, introduce the hw param fft_pad_sz and use
it in spectral process. Also group all the spectral params under the new
structure in hw param structure for scalable in future.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721180809.90960-2-jouni@codeaurora.org

ath11k: add support for 80P80 and 160 MHz bandwidth

For 160 MHz, nss_ratio_enabled flag is added to indicate firmware
supports sending NSS ratio information from firmware as a part of
service ready ext event. Extract this NSS ratio info from service
ready ext event and save this information in ath11k_pdev_cap to
calculate NSS ratio.

Current firmware configurations support two types of NSS ratio
which is WMI_NSS_RATIO_1_NSS for QCN9074 and WMI_NSS_RATIO_1BY2_NSS
for IPQ8074. Based on this two configuration, max supported
NSS getting calculated.

Move ath11k_peer_assoc_h_phymode() before ath11k_peer_assoc_h_vht()
to get arg->peer_phymode updated.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-00097-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1

Co-developed-by: Ganesh Sesetti <gseset@codeaurora.org>
Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org>
Co-developed-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: P Praneesh <ppranees@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721173615.75637-2-jouni@codeaurora.org

ath11k: add support for setting fixed HE rate/gi/ltf

Support setting fixed HE rate/gi/ltf values that we are now able to send
to the kernel using nl80211. The added code is reusing parts of the
existing code path already used for HT/VHT. The new helpers are
symmetric to how we do it for HT/VHT.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00235-QCAHKSWPL_SILICONZ-1

Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Co-developed-by: Lavanya Suresh <lavaks@codeaurora.org>
Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org>
Co-developed-by: Pradeep Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Pradeep Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721173615.75637-1-jouni@codeaurora.org

ath11k: monitor mode clean up to use separate APIs

If monitor interface is enabled in co-exist mode, only local traffic are
captured. It's caused by missing monitor vdev in co-exist mode. So,
monitor mode clean up is done with separate Monitor APIs. For this,
introduce flags monitor_started and monitor_vdev_created.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1

Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-4-jouni@codeaurora.org

ath11k: add separate APIs for monitor mode

Add separate APIs for monitor_vdev_create/monitor_vdev_delete
and monitor_vdev_start/monitor_vdev_stop.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1

Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-3-jouni@codeaurora.org

ath11k: move static function ath11k_mac_vdev_setup_sync to top

This is to prepare for monitor mode clean up.
No functional changes are done.

Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-2-jouni@codeaurora.org

wcn36xx: Implement Idle Mode Power Save

Idle Mode Power Save (IMPS) is a power saving mechanism which when called
by wcn36xx will cause the radio hardware to enter power collapse.

This particular call maps nicely to a simple conjunction/disjunction around
IEEE80211_CONF_CHANGE_IDLE and IEEE80211_CONF_IDLE.

Here we enter idle when we are not associated with an AP. The kernel will
incrementally toggle idle on/off in the process of trying to establish a
connection, thus saving power until we are connected to the AP again, at
which point we give way to BMPS if power_save is on.

We've validated that with IMPS an apq8039 device which has the wcn36xx
module loaded but, has not authenticated with an AP will get to VMIN on
suspend and will not without IMPS.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210909153320.2624649-1-bryan.odonoghue@linaro.org

wcn36xx: Add ability for wcn36xx_smd_dump_cmd_req to pass two's complement

Qcom documents suggest passing of negative values to the dump command,
however currently we convert from string to u32 not s32, so we cannot pass
a two's complement value to the firmware in this way.

There is in fact only one parameter which takes a two's complement value
<tigger threshold> in the antenna diversity switch command.

Downstream:
iwpriv wlan0 dump 71 3 <schedule period> <trigger threshold> <hysteresis value>

Upstream:
echo "71 3 <schedule period> <trigger threshold> <hysteresis value>" > /sys/kernel/debug/ieee80211/phy0/wcn36xx/dump

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210909144428.2564650-3-bryan.odonoghue@linaro.org

wcn36xx: Fix Antenna Diversity Switching

We have been tracking a strange bug with Antenna Diversity Switching (ADS)
on wcn3680b for a while.

ADS is configured like this:
   A. Via a firmware configuration table baked into the NV area.
       1. Defines if ADS is enabled.
       2. Defines which GPIOs are connected to which antenna enable pin.
       3. Defines which antenna/GPIO is primary and which is secondary.

   B. WCN36XX_CFG_VAL(ANTENNA_DIVERSITY, N)
      N is a bitmask of available antenna.

      Setting N to 3 indicates a bitmask of enabled antenna (1 | 2).

      Obviously then we can set N to 1 or N to 2 to fix to a particular
      antenna and disable antenna diversity.

   C. WCN36XX_CFG_VAL(ASD_PROBE_INTERVAL, XX)
      XX is the number of beacons between each antenna RSSI check.
      Setting this value to 50 means, every 50 received beacons, run the
      ADS algorithm.

   D. WCN36XX_CFG_VAL(ASD_TRIGGER_THRESHOLD, YY)
      YY is a two's complement integer which specifies the RSSI decibel
      threshold below which ADS will run.
      We default to -60db here, meaning a measured RSSI <= -60db will
      trigger an ADS probe.

   E. WCN36XX_CFG_VAL(ASD_RTT_RSSI_HYST_THRESHOLD, Z)
      Z is a hysteresis value, indicating a delta which the RSSI must
      exceed for the antenna switch to be valid.

      For example if HYST_THRESHOLD == 3 AntennaId1-RSSI == -60db and
      AntennaId-2-RSSI == -58db then firmware will not switch antenna.
      The threshold needs to be -57db or better to satisfy the criteria.

   F. A firmware feature bit also exists ANTENNA_DIVERSITY_SELECTION.
      This feature bit is used by the firmware to report if
      ANTENNA_DIVERSITY_SELECTION is supported. The host is not required to
      toggle this bit to enable or disable ADS.

ADS works like this:

    A. Every XX beacons the firmware switches to or remains on the primary
       antenna.

    B. The firmware then sends a Request-To-Send (RTS) packet to the AP.

    C. The firmware waits for a Clear-To-Send (CTS) response from the AP.

    D. The firmware then notes the received RSSI on the CTS packet.

    E. The firmware then repeats steps A-D on the secondary antenna.

    F. Subsequently if the RSSI on the measured antenna is better than
       ASD_TRIGGER_THRESHOLD + the active antenna's RSSI then the
       measured antenna becomes the active antenna.

    G. If RSSI rises past ASD_TRIGGER_THRESHOLD then ADS doesn't run at
       all even if there is a substantially better RSSI on the alternative
       antenna.

What we have been observing is that the RTS packet is being sent but the
MAC address is a byte-swapped version of the target MAC. The ADS/RTS MAC is
corrupted only when the link is encrypted, if the AP is open the RTS MAC is
correct. Similarly if we configure the firmware to an RTS/CTS sequence for
regular data - the transmitted RTS MAC is correctly formatted.

Internally the wcn36xx firmware uses the indexes in the SMD commands to
populate and extract data from specific entries in an STA lookup table. The
AP's MAC appears a number of times in different indexes within this lookup
table, so the MAC address extracted for the data-transmit RTS and the MAC
address extracted for the ADS/RTS packet are not the same STA table index.

Our analysis indicates the relevant firmware STA table index is
"bssSelfStaIdx".

There is an STA populate function responsible for formatting the MAC
address of the bssSelfStaIdx including byte-swapping the MAC address.

Its clear then that the required STA populate command did not run for
bssSelfStaIdx.

So taking a look at the sequence of SMD commands sent to the firmware we
see the following downstream when moving from an unencrypted to encrypted
BSS setup.

- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_CONFIG_STA_REQ
- WLAN_HAL_SET_STAKEY_REQ

Upstream in wcn36xx we have

- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_SET_STAKEY_REQ

The solution then is to add the missing WLAN_HAL_CONFIG_STA_REQ between
WLAN_HAL_CONFIG_BSS_REQ and WLAN_HAL_SET_STAKEY_REQ.

No surprise WLAN_HAL_CONFIG_STA_REQ is the routine responsible for
populating the STA lookup table in the firmware and once done the MAC sent
by the ADS routine is in the correct byte-order.

This bug is apparent with ADS but it is also the case that any other
firmware routine that depends on the "bssSelfStaIdx" would retrieve
malformed data on an encrypted link.

Fixes: 3e977c5c523d ("wcn36xx: Define wcn3680 specific firmware parameters")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210909144428.2564650-2-bryan.odonoghue@linaro.org

wcn36xx: handle connection loss indication

Firmware sends delete_sta_context_ind when it detects the AP has gone
away in STA mode. Right now the handler for that indication only handles
AP mode; fix it to also handle STA mode.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210901180606.11686-1-benl@squareup.com

ath11k: Align bss_chan_info structure with firmware

pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed
at the beginning. This causes invalid values in survey dump. Hence, align
the structure with the firmware.

Note: The firmware releases follow this order since the feature was
implemented. Also, it is not changing across the branches including
QCA6390.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210720214922.118078-3-jouni@codeaurora.org

ath11k: add support in survey dump with bss_chan_info

Survey dump statistics is not displaying channel rx and tx time because
the service flag is not enabled. Enable the service flag "bss_chan_info"
in wmi_resource_config to fetch and print the stats for the specific
pdev.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210720214922.118078-2-jouni@codeaurora.org

ath11k: Rename atf_config to flag1 in target_resource_config

The flag's purpose is not only meant for ATF configs. Rename atf_config
to flag1, so it can be used for future purposes.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210720214922.118078-1-jouni@codeaurora.org

ath11k: fix 4addr multicast packet tx

In 4addr, AP wired backbone to STA wired backbone ping fails due to ARP
request not getting answered. Here 4addr ARP multicast packet is sent in
3addr, so that 4addr STA not honouring the 3addr ARP multicast packet.
Fix this issue by sending out multicast packet in 4addr format, firmware
expects peer meta flag instead of vdev meta flag in Tx descriptor.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01641-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210720213147.90042-2-jouni@codeaurora.org

ath11k: fix 4-addr tx failure for AP and STA modes

Ath11k FW requires peer parameter WMI_PEER_USE_4ADDR to be set for
4-addr peers allowing 4-address frame transmission to those peers.

Add ath11k driver callback for sta_set_4addr() to queue new workq
set_4addr_wk only once based on new boolean, use_4addr_set.

sta_set_4addr() will be called during 4-addr STA association cases
applicable for both AP and STA modes.

In ath11k_sta_set_4addr_wk(),

AP mode:
        WMI_PEER_USE_4ADDR will be set for the corresponding
        associated 4-addr STA(s)

STA mode:
        WMI_PEER_USE_4ADDR will be set for the AP to which the
        4-addr STA got associated.

Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210720213147.90042-1-jouni@codeaurora.org

ath9k: owl-loader: fetch pci init values through nvmem

extends the owl loader to fetch important pci initialization
values - which are stored together with the calibration data -
through the nvmem subsystem.

This allows for much faster WIFI/ath9k initializations on devices
that do not require to perform any post-processing (like XOR'ing/
reversal or unpacking)... than the current way through the
firmware_request which involves the filesystem/userspace.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/bc79ba1c6f6435000577bf1e5f4d7ebe18a8df97.1630157099.git.chunkeey@gmail.com

ath9k: fetch calibration data via nvmem subsystem

On most embedded ath9k devices (like range extenders,
routers, accesspoints, ...) the calibration data is
stored in a MTD partitions named "ART", or "caldata"/
"calibration".

Since commit 4b361cfa8624 ("mtd: core: add OTP nvmem provider support"):
All MTD partitions are all automatically available through
the nvmem subsystem.

This feature - together with an nvmem cell definition either
in the platform data or via device-tree allows drivers to get
the data necessary for initializing the WIFI, without having
to wait around for the filesystem and userspace to do
the extractions.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/f9b732b50a3453fadf3923cc75d365bae3505fe7.1630157099.git.chunkeey@gmail.com

Linux 5.15-rc1

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

- Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

- Fix hybrid config terms list corruption.

- Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

- Add a file generated during the documentation build to .gitignore.

- Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

- Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

- Fix bpf 'perf test' sample mismatch reporting

- Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

- Allow build-id with trailing zeros.

- Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux

Pull compiler attributes updates from Miguel Ojeda:

- Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

- Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

- Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Merge tag 'smp-urgent-2021-09-12' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git./linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Merge tag 'sched_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

- Make sure the idle timer expires in hardirq context, on PREEMPT_RT

- Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Merge tag 'locking_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Borislav Petkov:

- Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

- Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

- Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Merge tag 'timers_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Borislav Petkov:

- Handle negative second values properly when converting a timespec64
to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Handle negative seconds correctly in timespec64_to_ns()

Merge branch 'misc.namei' of git://git./linux/kernel/git/viro/vfs

Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smbfs updates from Steve French:
"cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

- virtio-vsock support for end of record with SEQPACKET

- vdpa: mac and mq support for ifcvf and mlx5

- vdpa: management netlink for ifcvf

- virtio-i2c, gpio dt bindings

- misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Merge tag 'riscv-for-linus-5.15-mw1' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

- A larger address space for stack randomization.

- A cleanup to our install rules.

- A DTS update for the Microchip Icicle board, to fix the serial
   console.

- Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Merge branch 'for-5.15' of git://git./linux/kernel/git/jlawall/linux

Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive

tools headers UAPI: Update tools's copy of drm.h headers

Picking the changes from:

  17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync drm/i915_drm.h with the kernel sources

To pick the changes in:

  b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
  ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management")
  81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete")
  7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.")
  aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
  e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete")
  3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
  289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
  4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
  6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
  fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
  577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI")
  c649432e86ca677d ("drm/i915: Fix busy ioctl commentary")

That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/fs.h with the kernel sources

To pick the change in:

  7957d93bf32bc211 ("block: add ioctl to read the disk sequence number")

It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/in.h copy with the kernel sources

To pick the changes in:

  db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
  2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member")

That don't result in any change in tooling, the structs changed remains
with the same layout.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add an option to build without libbfd

Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.

This was inspired by:

https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Allow build-id with trailing zeros

Currently perf saves a build-id with size but old versions assumes the
size of 20.  In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.

I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data.  The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.

  symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.

The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.

  $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf

  Displaying notes found in: .note.gnu.build-id
    Owner                Data size Description
    GNU                  0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
      Build ID: 53e4c2f42a4c61a2d632d92a72afa08f

Let's fix this by allowing trailing zeros if the size is different.

Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix hybrid config terms list corruption

A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.

This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"

Example on ADL:

Before:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  # jobs
  [1]+  Running                    perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
  # perf top -E 10
    PerfTop:    4071 irqs/sec  kernel: 6.9%  exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles],  (all, 24 CPUs)
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    97.60%  perf           [.] __evsel__get_config_term
     0.25%  [kernel]       [k] kallsyms_expand_symbol.constprop.13
     0.24%  perf           [.] kallsyms__parse
     0.15%  [kernel]       [k] _raw_spin_lock
     0.14%  [kernel]       [k] number
     0.13%  [kernel]       [k] advance_transaction
     0.08%  [kernel]       [k] format_decode
     0.08%  perf           [.] map__process_kallsym_symbol
     0.08%  perf           [.] rb_insert_color
     0.08%  [kernel]       [k] vsnprintf
  exiting.
  # kill %1

After:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.060 MB perf.data ]
  # perf script | head
       perf-exec   604 [001]  1827.312293:                            psb:  psb offs: 0                       ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])

Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events")
Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events")
Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Factor out copy_config_terms() and free_config_terms()

Factor out copy_config_terms() and free_config_terms() so that they can
be reused.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields

Some fields are missing and text_poke is duplicated. Fix that up.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Ignore Documentation dependency file

When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.

Fixes: a81df63a5df3e195 ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
   now as we have plenty of flags left, but could become one. (Hao)

- Fix lockdep issue introduced in this merge window (me)

- Fix a few issues with the worker creation (me, Pavel, Qiang)

- Fix regression with wq_has_sleeper() for IOPOLL (Pavel)

- Timeout link error propagation fix (Pavel)

* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
  io_uring: fail links of cancelled timeouts
  io-wq: fix memory leak in create_io_worker()
  io-wq: fix silly logic error in io_task_work_match()
  io_uring: drop ctx->uring_lock before acquiring sqd->lock
  io_uring: fix missing mb() before waitqueue_active
  io-wq: fix cancellation on create-worker failure

Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request from Christoph:
     - fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
     - update a MAINTAINERS email address (Chaitanya Kulkarni)
     - set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
     - handle errors from add_disk() (Luis Chamberlain)
     - update the keep alive interval when kato is modified (Tatsuya Sasaki)
     - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
     - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
     - only call synchronize_srcu when clearing current path (Daniel Wagner)
     - revalidate paths during rescan (Hannes Reinecke)

- Split out the fs/block_dev into block/fops.c and block/bdev.c, which
   has been long overdue. Do this now before -rc1, to avoid annoying
   conflicts due to this (Christoph)

- blk-throtl use-after-free fix (Li)

- Improve plug depth for multi-device plugs, greatly increasing md
   resync performance (Song)

- blkdev_show() locking fix (Tetsuo)

- n64cart error check fix (Yang)

* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  n64cart: fix return value check in n64cart_probe()
  blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
  block: move fs/block_dev.c to block/bdev.c
  block: split out operations on block special files
  blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
  block: genhd: don't call blkdev_show() with major_names_lock held
  nvme: update MAINTAINERS email address
  nvme: add error handling support for add_disk()
  nvme: only call synchronize_srcu when clearing current path
  nvme: update keep alive interval when kato is modified
  nvme-tcp: Do not reset transport on data digest errors
  nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
  nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
  nvmet: looks at the passthrough controller when initializing CAP
  nvme: move nvme_multi_css into nvme.h
  nvme-multipath: revalidate paths during rescan
  nvme-multipath: set QUEUE_FLAG_NOWAIT

Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull libata maintainer update from Jens Axboe:
"Damien agreed to take over maintainership of libata, and he would be a
  great candidate for it. Update the MAINTAINERS entry to reflect the
  change in maintainer and git tree"

* tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  libata: pass over maintainership to Damien Le Moal

Merge tag 'trace-v5.15-3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Minor fixes to the processing of the bootconfig tree"

* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
  tracing/boot: Fix to check the histogram control param is a leaf node
  tracing/boot: Fix trace_boot_hist_add_array() to check array is value

Merge tag 'devicetree-fixes-for-5.15-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Disable fw_devlinks on x86 DT platforms to fix OLPC

- More replacing oneOf+const with enum on a few new schemas

- Drop unnecessary type references on Xilinx SPI binding schema

* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  spi: dt-bindings: xilinx: Drop type reference on *-bits properties
  dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
  of: property: Disable fw_devlink DT support for X86

Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
"One patch to fix an unused variable warning in a Qualcomm clk driver"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sm6350: Remove unused variable

Merge tag 'rtc-5.15' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
  subsystem since v5.14. The rest is fairly straightforward.

  Subsystem:
   - Switch to Neri and Schneider time conversion algorithm

  Drivers:
   - rx8025: add rx8035 support
   - s5m: modernize driver and set range"

* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: rx8010: select REGMAP_I2C
  dt-bindings: rtc: add Epson RX-8025 and RX-8035
  rtc: rx8025: implement RX-8035 support
  rtc: cmos: remove stale REVISIT comments
  rtc: tps65910: Correct driver module alias
  rtc: move RTC_LIB_KUNIT_TEST to proper location
  rtc: lib_test: add MODULE_LICENSE
  rtc: Improve performance of rtc_time64_to_tm(). Add tests.
  rtc: s5m: set range
  rtc: s5m: enable wakeup only when available
  rtc: s5m: signal the core when alarm are not available
  rtc: s5m: switch to devm_rtc_allocate_device

Merge tag 'firewire-update' of git://git./linux/kernel/git/ieee1394/linux1394

Pull firewire updates from Stefan Richter:

- Migrate the bus snooper driver 'nosy' from PCI to DMA API

- Small janitorial cleanup in the IPv4/v6-over-1394 driver

[ The 'nosy' change already come in as a different commit through Greg
  KH in the misc tree back in the previous merge window, so only the
  cleanup ends up being new to 5.15   - Linus ]

* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: nosy: switch from 'pci_' to 'dma_' API
  firewire: net: remove unused variable 'guid'

Merge tag 'pwm/for-5.15-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
  this is simplifications of drivers using device-managed functions and
  improving compilation coverage.

  The Mediatek display PWM driver now supports the atomic API.

  Cleanups and minor fixes make up the remainder of this set"

* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
  pwm: mtk-disp: Implement atomic API .get_state()
  pwm: mtk-disp: Fix overflow in period and duty calculation
  pwm: mtk-disp: Implement atomic API .apply()
  pwm: mtk-disp: Adjust the clocks to avoid them mismatch
  dt-bindings: pwm: rockchip: Add description for rk3568
  pwm: Make pwmchip_remove() return void
  pwm: sun4i: Don't check the return code of pwmchip_remove()
  pwm: sifive: Don't check the return code of pwmchip_remove()
  pwm: samsung: Don't check the return code of pwmchip_remove()
  pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
  pwm: rcar: Don't check the return code of pwmchip_remove()
  pwm: pca9685: Don't check the return code of pwmchip_remove()
  pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
  pwm: mtk-disp: Don't check the return code of pwmchip_remove()
  pwm: imx-tpm: Don't check the return code of pwmchip_remove()
  pwm: img: Don't check the return code of pwmchip_remove()
  pwm: cros-ec: Don't check the return code of pwmchip_remove()
  pwm: brcmstb: Don't check the return code of pwmchip_remove()
  pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
  pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
  ...

Merge tag 'thermal-v5.15-rc1' of git://git./linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

- Add the tegra3 thermal sensor and fix the compilation testing on
   tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
   (Dmitry Osipenko)

- Fix the error code for the exynos when devm_get_clk() fails (Dan
   Carpenter)

- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)

- Add support for hardware trip points for the rcar gen3 thermal driver
   and store TSC id as unsigned int (Niklas Söderlund)

- Replace the deprecated CPU-hotplug functions get_online_cpus() and
   put_online_cpus (Sebastian Andrzej Siewior)

- Add the thermal tools directory in the MAINTAINERS file (Daniel
   Lezcano)

- Fix the Makefile and the cross compilation flags for the userspace
   'tmon' tool (Rolf Eike Beer)

- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
   Pawnikar)

- Fix the stub thermal_cooling_device_register() function prototype
   which does not match the real function (Arnd Bergmann)

- Make the thermal trip point optional in the DT bindings (Maxime
   Ripard)

- Fix a typo in a comment in the core code (Geert Uytterhoeven)

- Reduce the verbosity of the trace in the SoC thermal tegra driver
   (Dmitry Osipenko)

- Add the support for the LMh (Limit Management hardware) driver on the
   QCom platforms (Thara Gopinath)

- Allow processing of HWP interrupt by adding a weak function in the
   Intel driver (Srinivas Pandruvada)

- Prevent an abort of the sensor probe is a channel is not used
   (Matthias Kaehlcke)

* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
  thermal/drivers/intel: Allow processing of HWP interrupt
  dt-bindings: thermal: Add dt binding for QCOM LMh
  thermal/drivers/qcom: Add support for LMh driver
  firmware: qcom_scm: Introduce SCM calls to access LMh
  thermal/drivers/tegra-soctherm: Silence message about clamped temperature
  thermal: Spelling s/scallbacks/callbacks/
  dt-bindings: thermal: Make trips node optional
  thermal/core: Fix thermal_cooling_device_register() prototype
  thermal/drivers/int340x: Use IMOK independently
  tools/thermal/tmon: Add cross compiling support
  thermal/tools/tmon: Improve the Makefile
  MAINTAINERS: Add missing userspace thermal tools to the thermal section
  thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
  thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
  thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
  drivers/thermal/intel: Add TCC cooling support for AlderLake platform
  thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
  thermal/drivers/tegra: Correct compile-testing of drivers
  thermal/drivers/tegra: Add driver for Tegra30 thermal sensor

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- several device tree bindings for input devices have been converted to
   yaml

- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers

- analog joystick has been converted to use ktime API and no longer
   warn about low resolution timers

- a few driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: analog - always use ktime functions
  Input: mms114 - support MMS134S
  Input: elan_i2c - reduce the resume time for controller in Whitebox
  Input: edt-ft5x06 - added case for EDT EP0110M09
  Input: adc-keys - drop bogus __refdata annotation
  Input: Fix spelling mistake in Kconfig "useable" -> "usable"
  Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
  Input: remove dead CSR Prima2 PWRC driver
  Input: adp5589-keys - use the right header
  Input: adp5588-keys - use the right header
  dt-bindings: input: tsc2005: Convert to YAML schema
  Input: ep93xx_keypad - prepare clock before using it
  dt-bindings: input: sun4i-lradc: Add wakeup-source
  dt-bindings: input: Convert Regulator Haptic binding to a schema
  dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
  dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
  Input: pm8941-pwrkey - fix comma vs semicolon issue
  dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
  dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
  dt-bindings: power: reset: Change 'additionalProperties' to true
  ...

riscv: Move EXCEPTION_TABLE to RO_DATA segment

_ex_table section is read-only, so move it to RO_DATA.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Enable BUILDTIME_TABLE_SORT

Enable BUILDTIME_TABLE_SORT to sort the exception table at build time
rather than during boot.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: dts: microchip: mpfs-icicle: Fix serial console

Currently, nothing is output on the serial console, unless
"console=ttyS0,115200n8" or "earlycon" are appended to the kernel
command line. Enable automatic console selection using
chosen/stdout-path by adding a proper alias, and configure the expected
serial rate.

While at it, add aliases for the other three serial ports, which are
provided on the same micro-USB connector as the first one.

Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: move the (z)install rules to arch/riscv/Makefile

Currently, the (z)install targets in arch/riscv/Makefile descend into
arch/riscv/boot/Makefile to invoke the shell script, but there is no
good reason to do so.

arch/riscv/Makefile can run the shell script directly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Improve stack randomisation on RV64

This enlarges the bits availiable for stack randomisation on RV64 from
the default of 8MiB to 1GiB, to match arm64 and x86.

Also, update the documentation to reflect our support for stack
randomisation.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1

The EFI system partition uses the FAT file system. Many distributions add
an entry in /etc/fstab for the ESP. We must ensure that mounting does not
fail.

The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE).
The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1).

So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: defconfig: enable BLK_DEV_NVME

NVMe is a non-volatile storage media attached via PCIe.
As NVMe has much higher throughput than other block devices like
SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME.

The HiFive Unmatched is a board providing M.2 slots for NVMe drives.
Enable CONFIG_PCIE_FU740.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Documentation: core-api/cpuhotplug: Rewrite the API section

Dave stumbled over the incomplete and confusing documentation of the CPU
hotplug API.

Rewrite it, add the missing function documentations and correct the
existing ones.

Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210909123212.489059409@linutronix.de

cpu/hotplug: Remove deprecated CPU-hotplug functions.

No users in tree use the deprecated CPU-hotplug functions anymore.

Remove them.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-39-bigeasy@linutronix.de

thermal: Replace deprecated CPU-hotplug functions.

The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-20-bigeasy@linutronix.de

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.

perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions

The btf__get_from_id() function was deprecated in favour of
btf__load_from_kernel_by_id(), but it is still avaiable, so use it to
provide a weak function btf__load_from_kernel_by_id() for older libbpf
when building perf with LIBBPF_DYNAMIC=1, i.e. using the system's libbpf
package.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools include UAPI: Update linux/mount.h copy

To pick the changes from:

  9ffb14ef61bab83f ("move_mount: allow to add a mount into an existing group")

That ends up adding support for the new MOVE_MOUNT_SET_GROUP move_mount
flag.

  $ tools/perf/trace/beauty/move_mount_flags.sh > before
  $ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
  $ tools/perf/trace/beauty/move_mount_flags.sh > after
  $ diff -u before after
  --- before 2021-09-10 12:28:43.865279808 -0300
  +++ after 2021-09-10 12:28:50.183429184 -0300
  @@ -5,4 +5,5 @@
    [ilog2(0x00000010) + 1] = "T_SYMLINKS",
    [ilog2(0x00000020) + 1] = "T_AUTOMOUNTS",
    [ilog2(0x00000040) + 1] = "T_EMPTY_PATH",
  + [ilog2(0x00000100) + 1] = "SET_GROUP",
   };
  $

So now one can use it in --filter expressions for tracepoints.

This silences this perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
  diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h

Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf beauty: Cover more flags in the move_mount syscall argument beautifier

Previously the regext expected MOVE_MOUNT_[FT]_*, but in the next patch
a flag that doesn't match that expression will be added, MOVE_MOUNT_SET_GROUP

To make this more future proof, take advantage of the fact that the only
one we don't need to cover is MOVE_MOUNT__MASK and use MOVE_MOUNT_[^_]+_*_.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/prctl.h with the kernel sources

To pick the changes in:

  433c38f40f6a81cf ("arm64: mte: change ASYNC and SYNC TCF settings into bitfields")
  e893bb1bb4d2eb63 ("x86, prctl: Hook L1D flushing in via prctl")

That don't result in any changes in tooling:

  $ tools/perf/trace/beauty/prctl_option.sh > before
  $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
  $ tools/perf/trace/beauty/prctl_option.sh > after
  $ diff -u before after
  $

Just silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
  diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h

Cc: Balbir Singh <sblbir@amazon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools include UAPI: Sync sound/asound.h copy with the kernel sources

Picking the changes from:

  81be10934949da8b ("ALSA: pcm: Add SNDRV_PCM_INFO_EXPLICIT_SYNC flag")

Which entails no changes in the tooling side as it doesn't introduce new
ioctls.

To silence this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/kvm.h with the kernel sources

To pick the changes in:

  f95937ccf5bd5e0a ("KVM: stats: Support linear and logarithmic histogram statistics")
  f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
  ea7fc1bb1cd1b92b ("KVM: arm64: Introduce MTE VM feature")

That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.

This is also by now used by tools/testing/selftests/kvm/, so that will
pick the new KVM_STATS_TYPE_LINEAR_HIST and KVM_STATS_TYPE_LOG_HIST
defines.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Jing Zhang <jingzhangos@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources

To pick the changes in:

  61e5f69ef08379cd ("KVM: x86: implement KVM_GUESTDBG_BLOCKIRQ")

That just rebuilds kvm-stat.c on x86, no change in functionality.

This silences these perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h

Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Add support to print a textual representation of IBS raw sample data

Perf records IBS (Instruction Based Sampling) extra sample data when
'perf record --raw-samples' is used with an IBS-compatible event, on a
machine that supports IBS.  IBS support is indicated in
CPUID_Fn80000001_ECX bit #10.

Up until now, users have been able to see the extra sample data solely
in raw hex format using 'perf report --dump-raw-trace'.  From there,
users could decode the data either manually, or by using an external
script.

Enable the built-in 'perf report --dump-raw-trace' to do the decoding of
the extra sample data bits, so manual or external script decoding isn't
necessary.

Example usage:

  $ sudo perf record -c 10000001 -a --raw-samples -e ibs_fetch/rand_en=1/,ibs_op/cnt_ctl=1/ -C 0,1 taskset -c 0,1 7za b -mmt2 | perf report --dump-raw-trace

Stdout contains IBS Fetch samples, e.g.:

  ibs_fetch_ctl: 02170007ffffffff MaxCnt 1048560 Cnt 1048560 Lat     7 En 1 Val 1 Comp 1 IcMiss 0 PhyAddrValid 1 L1TlbPgSz 4KB L1TlbMiss 0 L2TlbMiss 0 RandEn 1 L2Miss 0
  IbsFetchLinAd: 000056016b2ead40
  IbsFetchPhysAd: 000000115cedfd40
  c_ibs_ext_ctl: 0000000000000000 IbsItlbRefillLat   0

..and IBS Op samples, e.g.:

  ibs_op_ctl: 0000009e009e8968 MaxCnt  10000000 En 1 Val 1 CntCtl 1=uOps CurCnt       158
  IbsOpRip: 000056016b2ea73d
  ibs_op_data: 00000000000b0002 CompToRetCtr     2 TagToRetCtr    11 BrnRet 0  RipInvalid 0 BrnFuse 0 Microcode 0
  ibs_op_data2: 0000000000000002 CacheHitSt 0=M-state RmtNode 0 DataSrc 2=Local node cache
  ibs_op_data3: 0000000000c60002 LdOp 0 StOp 1 DcL1TlbMiss 0 DcL2TlbMiss 0 DcL1TlbHit2M 0 DcL1TlbHit1G 0 DcL2TlbHit2M 0 DcMiss 0 DcMisAcc 0 DcWcMemAcc 0 DcUcMemAcc 0 DcLockedOp 0 DcMissNoMabAlloc 0 DcLinAddrValid 1 DcPhyAddrValid 1 DcL2TlbHit1G 0 L2Miss 0 SwPf 0 OpMemWidth  4 bytes OpDcMissOpenMemReqs  0 DcMissLat     0 TlbRefillLat     0
  IbsDCLinAd: 00007f133c319ce0
  IbsDCPhysAd: 0000000270485ce0

Committer notes:

Fixed up this:

  util/amd-sample-raw.c: In function ‘evlist__amd_sample_raw’:
  util/amd-sample-raw.c:125:42: error: ‘ bytes’ directive output may be truncated writing 6 bytes into a region of size between 4 and 7 [-Werror=format-truncation=]
    125 |                          " OpMemWidth %2d bytes", 1 << (reg.op_mem_width - 1));
        |                                          ^~~~~~
  In file included from /usr/include/stdio.h:866,
                   from util/amd-sample-raw.c:7:
  /usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 21 and 24 bytes into a destination of size 21
     71 |   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     72 |                                    __glibc_objsize (__s), __fmt,
        |                                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     73 |                                    __va_arg_pack ());
        |                                    ~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

As that %2d won't limit the number of chars to 2, just state that 2 is
the minimal width:

  $ cat printf.c
  #include <stdio.h>
  #include <stdlib.h>

  int main(int argc, char *argv[])
  {
   char bf[64];
   int len = snprintf(bf, sizeof(bf), "%2d", atoi(argv[1]));

   printf("strlen(%s): %u\n", bf, len);

   return 0;
  }
  $ ./printf 1
  strlen( 1): 2
  $ ./printf 12
  strlen(12): 2
  $ ./printf 123
  strlen(123): 3
  $ ./printf 1234
  strlen(1234): 4
  $ ./printf 12345
  strlen(12345): 5
  $ ./printf 123456
  strlen(123456): 6
  $

And since we probably don't want that output to be truncated, just
assume the worst case, as the compiler did, and add a few more chars to
that buffer.

Also use sizeof(var) instead of sizeof(dup-of-wanted-format-string) to
avoid bugs when changing one but not the other.

I also had to change this:

  -#include <asm/amd-ibs.h>
  +#include "../../arch/x86/include/asm/amd-ibs.h"

To make it build on other architectures, just like intel-pt does.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-4-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Add tools/arch/x86/include/asm/amd-ibs.h

This is a tools/-side patch for the patch that adds the original copy
of the IBS header file, in arch/x86/include/asm/.

We also add an entry to check-headers.sh, so future changes continue
to be copied.

Committer notes:

Had to add this

-#include <asm/msr-index.h>
+#include "msr-index.h"

And change the check-headers.sh entry to ignore this line when diffing
with the original kernel header.

This is needed so that we can use 'perf report' on a perf.data with IBS
data on a !x86 system, i.e. building on ARM fails without this as there
is no asm/msr-index.h there.

This was done on the next patch in this series and is done for things
like Intel PT and ARM CoreSight.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-3-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'acpi-5.15-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
"These prevent a confusing PRMT-related message from being printed,
  drop an unnecessary header file include and update the list of ACPICA
  maintainers.

  Specifics:

   - Prevent a message about missing PRMT from being printed on systems
     that do not support PRM, which are the majority now (Aubrey Li).

   - Drop unnecessary header include from scan.c (Kari Argillander).

   - Update the list of ACPICA maintainers after recent departure of one
     of them (Rafael Wysocki)"

* tag 'acpi-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Update the list of maintainers
  ACPI: PRM: Find PRMT table before parsing it
  ACPI: scan: Remove unneeded header linux/nls.h

Merge tag 'pm-5.15-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
"These improve hybrid processors support in intel_pstate, fix an issue
  in the core devices PM code, clean up the handling of dedicated wake
  IRQs, update the Energy Model documentation and update MAINTAINERS.

  Specifics:

   - Make the HWP performance levels calibration on hybrid processors in
     intel_pstate more straightforward (Rafael Wysocki).

   - Prevent the PM core from leaving devices in suspend after a failing
     system-wide suspend transition in some cases when driver PM flags
     are used (Prasad Sodagudi).

   - Drop unused function argument from the dedicated wake IRQs handling
     code (Sergey Shtylyov).

   - Fix up Energy Model kerneldoc comments and include them in the
     Energy Model documentation (Lukasz Luba).

   - Use my kernel.org address in MAINTAINERS insead of the personal one
     (Rafael Wysocki)"

* tag 'pm-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: Change Rafael's e-mail address
  PM: sleep: core: Avoid setting power.must_resume to false
  Documentation: power: include kernel-doc in Energy Model doc
  PM: EM: fix kernel-doc comments
  cpufreq: intel_pstate: hybrid: Rework HWP calibration
  ACPI: CPPC: Introduce cppc_get_nominal_perf()
  PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq()

spi: dt-bindings: xilinx: Drop type reference on *-bits properties

Properties with standard unit suffixes such as '-bits' don't need a
type.

Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-spi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165945.2852999-1-robh@kernel.org

dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries

'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.

Fix a couple more cases which have appeared.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Limit the linear region to 51-bit when KVM is running in nVHE mode.

   Otherwise, depending on the placement of the ID map, kernel-VA to
   hyp-VA translations may produce addresses that either conflict with
   other HYP mappings or generate addresses outside of the 52-bit
   addressable range.

- Instruct kmemleak not to scan the memory reserved for kdump as this
   range is removed from the kernel linear map and therefore not
   accessible.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kdump: Skip kmemleak scan reserved memory for kdump
  arm64: mm: limit linear region to 51 bits for KVM in nVHE mode

Merge tag 'for-5.15/parisc-3' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:

- Build warning fixes in Makefile and Dino PCI driver

- Fix when sched_clock is marked unstable

- Drop strnlen_user() in favour of generic version

- Prevent kernel to write outside userspace signal stack

- Remove CONFIG_SET_FS including KERNEL_DS and USER_DS from parisc and
   switch to __get/put_kernel_nofault()

* tag 'for-5.15/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Implement __get/put_kernel_nofault()
  parisc: Mark sched_clock unstable only if clocks are not syncronized
  parisc: Move pci_dev_is_behind_card_dino to where it is used
  parisc: Reduce sigreturn trampoline to 3 instructions
  parisc: Check user signal stack trampoline is inside TASK_SIZE
  parisc: Drop useless debug info and comments from signal.c
  parisc: Drop strnlen_user() in favour of generic version
  parisc: Add missing FORCE prerequisite in Makefile

Merge tag 'iommu-fixes-v5.15-rc0' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Intel VT-d:
     - PASID leakage in intel_svm_unbind_mm()
     - Deadlock in intel_svm_drain_prq()

- AMD IOMMU: Fixes for an unhandled page-fault bug when AVIC is used
   for a KVM guest.

- Make CONFIG_IOMMU_DEFAULT_DMA_LAZY architecture instead of IOMMU
   driver dependent

* tag 'iommu-fixes-v5.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Clarify default domain Kconfig
  iommu/vt-d: Fix a deadlock in intel_svm_drain_prq()
  iommu/vt-d: Fix PASID leak in intel_svm_unbind_mm()
  iommu/amd: Remove iommu_init_ga()
  iommu/amd: Relocate GAMSup check to early_enable_iommus

Merge tag 'char-misc-5.15-rc1-2' of git://git./linux/kernel/git/gregkh/char-misc

Pull habanalabs updates from Greg KH:
"Here is another round of misc driver patches for 5.15-rc1.

  In here is only updates for the Habanalabs driver. This request is
  late because the previously-objected-to dma-buf patches are all
  removed and some fixes that you and others found are now included in
  here as well.

  All of these have been in linux-next for well over a week with no
  reports of problems, and they are all self-contained to only this one
  driver. Full details are in the shortlog"

* tag 'char-misc-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (61 commits)
  habanalabs/gaudi: hwmon default card name
  habanalabs: add support for f/w reset
  habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC
  habanalabs: cannot sleep while holding spinlock
  habanalabs: never copy_from_user inside spinlock
  habanalabs: remove unnecessary device status check
  habanalabs: disable IRQ in user interrupts spinlock
  habanalabs: add "in device creation" status
  habanalabs/gaudi: invalidate PMMU mem cache on init
  habanalabs/gaudi: size should be printed in decimal
  habanalabs/gaudi: define DC POWER for secured PMC
  habanalabs/gaudi: unmask out of bounds SLM access interrupt
  habanalabs: add userptr_lookup node in debugfs
  habanalabs/gaudi: fetch TPC/MME ECC errors from F/W
  habanalabs: modify multi-CS to wait on stream masters
  habanalabs/gaudi: add monitored SOBs to state dump
  habanalabs/gaudi: restore user registers when context opens
  habanalabs/gaudi: increase boot fit timeout
  habanalabs: update to latest firmware headers
  habanalabs/gaudi: minimize number of register reads
  ...

Merge branches 'acpi-scan' and 'acpi-prm'

* acpi-scan:
ACPI: scan: Remove unneeded header linux/nls.h

* acpi-prm:
ACPI: PRM: Find PRMT table before parsing it

Merge branches 'pm-cpufreq', 'pm-sleep' and 'pm-em'

* pm-cpufreq:
  cpufreq: intel_pstate: hybrid: Rework HWP calibration
  ACPI: CPPC: Introduce cppc_get_nominal_perf()

* pm-sleep:
  PM: sleep: core: Avoid setting power.must_resume to false
  PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq()

* pm-em:
  Documentation: power: include kernel-doc in Energy Model doc
  PM: EM: fix kernel-doc comments

Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Just an initial bunch of fixes for the merge window, amdgpu is most of
  them with a few ttm fixes and an fbdev avoid multiply overflow fix.

  core:
   - Make some dma-buf config options depend on DMA_SHARED_BUFFER
   - Handle multiplication overflow of fbdev xres/yres in the core

  ttm:
   - Fix ttm_bo_move_memcpy() when ttm_resource is subclassed
   - Fix ttm deadlock if target BO isn't idle
   - ttm build fix
   - ttm docs fix

  dma-buf:
   - config option fixes

  fbdev:
   - limit resolutions to avoid int overflow

  i915:
   - stddef change.

  amdgpu:
   - Misc cleanups, typo fixes
   - EEPROM fix
   - Add some new PCI IDs
   - Scatter/Gather display support for Yellow Carp
   - PCIe DPM fix for RKL platforms
   - RAS fix

  amdkfd:
   - SVM fix

  vc4:
   - static function fix

  mgag200:
   - fix uninit var

  panfrost:
   - lock_region fixes"

* tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits)
  drm/ttm: Fix a deadlock if the target BO is not idle during swap
  fbmem: don't allow too huge resolutions
  dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER
  dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER
  drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers"
  dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER
  drm/amdkfd: drop process ref count when xnack disable
  drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode
  drm/amdgpu: fix fdinfo race with process exit
  drm/amdgpu: Fix a deadlock if previous GEM object allocation fails
  drm/amdgpu: stop scheduler when calling hw_fini (v2)
  drm/amdgpu: Clear RAS interrupt status on aldebaran
  drm/amd/display: Initialize lt_settings on instantiation
  drm/amd/display: cleanup idents after a revert
  drm/amd/display: Fix memory leak reported by coverity
  drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource
  drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum"
  drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform
  drm/amdgpu: show both cmd id and name when psp cmd failed
  drm/amd/display: setup system context for APUs
  ...