pinctrl: Ingenic: Add support for read the pin configuration of X1830.

Add X1830 support in "ingenic_pinconf_get()", so that it can read the
configuration of X1830 SoC correctly.

Fixes: d7da2a1e4e08 ("pinctrl: Ingenic: Add pinctrl driver for X1830.")
Cc: <stable@vger.kernel.org>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1618757073-1724-3-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: Ingenic: Add missing pins to the JZ4770 MAC MII group.

The MII group of JZ4770's MAC should have 7 pins, add missing
pins to the MII group.

Fixes: 5de1a73e78ed ("Pinctrl: Ingenic: Add missing parts for JZ4770 and JZ4780.")
Cc: <stable@vger.kernel.org>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1618757073-1724-2-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: rockchip: add RK3568 SoC support

Add RK3568/RK3566 SoC support to pinctrl.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210410204500.18091-1-ezequiel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers: pinctrl: qcom: fix Kconfig dependency on GPIOLIB

When PINCTRL_MSM is enabled, and GPIOLIB is disabled,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
  Depends on [n]: GPIOLIB [=n]
  Selected by [y]:
  - PINCTRL_MSM [=y] && PINCTRL [=y] && (ARCH_QCOM || COMPILE_TEST [=y])

This is because PINCTRL_MSM selects GPIOLIB_IRQCHIP,
without selecting or depending on GPIOLIB, despite
GPIOLIB_IRQCHIP depending on GPIOLIB. Having PINCTRL_MSM
select GPIOLIB will cause a recursive dependency error.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210414025138.480085-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91-pio4: Fix slew rate disablement

The slew rate was enabled by default for each configuration of the
pin. In case the pin had more than one configuration, even if
we set the slew rate as disabled in the device tree, the next pin
configuration would set again the slew rate enabled by default,
overwriting the slew rate disablement.
Instead of enabling the slew rate by default for each pin configuration,
enable the slew rate by default just once per pin, regardless of the
number of configurations. This way the slew rate disablement will also
work for cases where pins have multiple configurations.

Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: samsung: use 'int' for register masks in Exynos

The Special Function Registers on all Exynos SoC, including ARM64, are
32-bit wide, so entire driver uses matching functions like readl() or
writel().  On 64-bit ARM using unsigned long for register masks:
1. makes little sense as immediately after bitwise operation it will be
   cast to 32-bit value when calling writel(),
2. is actually error-prone because it might promote other operands to
   64-bit.

Addresses-Coverity: Unintentional integer overflow
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20210408195029.69974-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom-pmic-gpio: Add support for pm8008

Add support for the two GPIOs present on Qualcomm Technologies, Inc.
PM8008.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/129d241ee510e28536d35dbfeee75474e12d8d22.1617901945.git.gurus@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8008 support

Add support for the 2 GPIOs present on Qualcomm Technologies, Inc.
PM8008.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/2be34cc205ae96d40b04a9efdcf9287d5da9d1c0.1617901945.git.gurus@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

docs: pin-control: Fix error path for control state example

The error is constructed using the wrong variable.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210328164222.720525-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: imx: Disallow driver unbind

Performing the 'unbind' operation on pinctrl drivers is
not a sensible usecase, so pass the suppress_bind_attrs
atribute to prevent it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210328183034.555702-2-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: imx: Remove unneeded of_match_ptr()

i.MX is a DT-only platform, so of_match_ptr() can be safely
removed.

Remove the unneeded of_match_ptr().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210328183034.555702-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ti: fix error return code of ti_iodelay_dt_node_to_map()

when devm_kcalloc fails, use -ENOMEM instead of -EINVAL,
and consistent with other devm_kcalloc return values.

Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210330062655.1027-1-angkery@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: rockchip: add support for rk3568

RK3568 SoCs have 5 gpio controllers, each gpio has 32 pins. GPIO supports
set iomux, pull, drive strength and schmitt.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210319081441.368358-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: stm32: Print invalid AF warning inside stm32_pctrl_is_function_valid()

The "invalid function %d on pin %d .\n" message is triplicated in the
driver in different variants, just pull it into the function and have
it once in the driver. The bonus is that all variants of the message
now print the pin number and AF consistently, so it is easier to debug
such pinmux problems.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Acked-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20210406180035.279249-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm63xx: Fix More dependencies

The additional patch below fixes all of the kconfig warnings and
build errors for me.

Link: https://lore.kernel.org/r/9e1cec76-1c0a-9203-7995-4c2d09b711d8@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[Tweaked some other line in the BCMxxx]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.13-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.13 (take two)

  - Add bias support for the R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N
    SoCs,
  - Miscellaneous cleanups and improvements.

pinctrl: bcm63xx: Fix dependencies

Add depends on OF so we don't get weird build errors on
randconfig.

Also order selects the same as the other drivers for
pure aestetic reasons.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm: bcm6362: fix warning

The current implementation of bcm6362_set_gpio() produces the following
warning on x86_64:
drivers/pinctrl/bcm/pinctrl-bcm6362.c: In function 'bcm6362_set_gpio':
drivers/pinctrl/bcm/pinctrl-bcm6362.c:503:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  503 |        (uint32_t) desc->drv_data, 0);
      |        ^

Modify the code to make it similar to bcm63268_set_gpio() in order to fix
the warning.

Fixes: 705791e23ecd ("pinctrl: add a pincontrol driver for BCM6362")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210330103225.3949-1-noltari@gmail.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge branch 'ib-bcm63xx' into devel

Merge tag 'intel-pinctrl-v5.13-1' of gitolite.pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.13-1

* Don't disable disabled IRQs in the handler
* Fix the base calculation for groups defined by size

The following is an automated git shortlog grouped by driver:

intel:
 -  No need to disable IRQs in the handler
 -  Show the GPIO base calculation explicitly

drivers: pinctrl: Remove duplicate include of io.h

linux/io.h has been included at line 6, so remove the
duplicate include at line 18.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210323013727.135571-1-wanjiabing@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add a pincontrol driver for BCM6318

Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
to different functions. BCM6318 is similar to BCM6328 with the addition
of a pad register, and the GPIO meaning of the mux register changes
based on the GPIO number.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6318 GPIO sysctl binding documentation

Add binding documentation for the GPIO sysctl found in BCM6318 SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-22-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6318 pincontroller binding documentation

Add binding documentation for the pincontrol core found in BCM6318 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-21-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add a pincontrol driver for BCM63268

Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
to different functions. Depending on the mux, these are either single
pin configurations or whole pin groups.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM63268 GPIO sysctl binding documentation

Add binding documentation for the GPIO sysctl found in BCM63268 SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-19-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM63268 pincontroller binding documentation

Add binding documentation for the pincontrol core found in the BCM63268
family SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-18-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add a pincontrol driver for BCM6368

Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
GPIOs onto alternative functions. Not all are documented.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6368 GPIO sysctl binding documentation

Add binding documentation for the GPIO sysctl found in BCM6368 SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-16-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6368 pincontroller binding documentation

Add binding documentation for the pincontrol core found in BCM6368 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-15-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add a pincontrol driver for BCM6362

Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
GPIO pins to the LED controller, to be available by the integrated
wifi, or other functions. It also supports overlay groups, of which
only NAND is documented.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6362 GPIO sysctl binding documentation

Add binding documentation for the GPIO sysctl found in BCM6362 SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-13-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6362 pincontroller binding documentation

Add binding documentation for the pincontrol core found in BCM6362 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-12-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add a pincontrol driver for BCM6358

Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
functions onto the GPIO pins. It does not support configuring individual
pins but only whole groups. These groups may overlap, and still require
the directions to be set correctly in the GPIO register. In addition the
functions register controls other, not directly mux related functions.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6358 GPIO sysctl binding documentation

Add binding documentation for the GPIO sysctl found in BCM6358 SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-10-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6358 pincontroller binding documentation

Add binding documentation for the pincontrol core found in BCM6358 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-9-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add a pincontrol driver for BCM6328

Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as
GPIOs, as LEDs for the integrated LED controller, or various other
functions. Its pincontrol mux registers also control other aspects, like
switching the second USB port between host and device mode.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6328 GPIO sysctl binding documentation

Add binding documentation for the GPIO sysctl found in BCM6328 SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-7-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: add BCM6328 pincontroller binding documentation

Add binding documentation for the pincontrol core found in BCM6328 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-6-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm: add bcm63xx base code

Add a helper for registering BCM63XX pin controllers.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-5-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: improve BCM6345 GPIO binding documentation

Convert existing BCM6345 GPIO binding documentation to YAML and add binding
documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358,
BCM6362, BCM6368 and BCM63268 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210324081923.20379-4-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: regmap: set gpio_chip of_node

This is needed for properly registering GPIO regmap as a child of a regmap
pin controller.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP

The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
isn't enabled.

Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: intel: No need to disable IRQs in the handler

In IRQ handler interrupts are already disabled, hence no need
to repeat it. Even in the threaded case, which is disabled here,
it is not a problem because IRQ framework serializes descriptor
handling. Remove disabling IRQ part in the handler.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: PINCTRL_ROCKCHIP should depend on ARCH_ROCKCHIP

The Rockchip GPIO and pin control modules are only present on Rockchip
SoCs.  Hence add a dependency on ARCH_ROCKCHIP, to prevent asking the
user about this driver when configuring a kernel without Rockchip
platform support.

Note that before, the PINCTRL_ROCKCHIP symbol was not visible, and
automatically selected when needed.  By making it tristate and
user-selectable, it became visible for everyone.

Fixes: be786ac5a6c4bf4e ("pinctrl: rockchip: make driver be tristate module")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210316134059.2377081-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: add lock in mtk_rmw function.

When multiple threads operate on the same register resource
which include multiple pin, It will make the register resource
wrong to control. So we add lock to avoid the case.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Link: https://lore.kernel.org/r/20210321033150.15380-2-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.13-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.13

  - Add pin groups for the green and high8 subsets of the Video IN (VIN)
    pins on R-Car H3 ES2.0+, R-Car M3-W/M3-W+, R-Car M3-N, and R-Car E3.

pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero

A System Error (SError, followed by kernel panic) was detected when
trying to print the supported pins in a pinctrl device which supports
multiple pins per register. This change fixes the pcs_pin_dbg_show() in
pinctrl-single driver when bits_per_mux is not zero. In addition move
offset calculation and pin offset in register to common function.

Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-4-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinctrl-single: remove unused parameter

Remove unused parameter 'pin_pos' from pcs_add_pin().

Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-3-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinctrl-single: remove unused variable

Remove unused parameter 'num_pins_in_register' from
pcs_allocate_pin_table().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-2-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: r8a7791: Add bias pinconf support

Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK)
handling for R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N SoCs, using the
common R-Car bias handling.

Note that on RZ/G1 SoCs, the "ASEBRK#/ACK" pin is called "ACK", but the
code doesn't handle that naming difference.  Hence users should use the
R-Car naming in DTS files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-7-geert+renesas@glider.be

pinctrl: renesas: Add support for R-Car SoCs with pull-down only pins

Currently, the common R-Car bias handling supports pin controllers with
either:
  1. Separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD)
     registers, for controlling both pin pull-up and pin pull-down,
  2. A single pin Pull-Up control register (PUPR), for controlling pin
     pull-up.

Add support for a variant of #2, where some bits in the single pin
Pull-Up control register (PUPR) control pin pull-down instead of pin
pull-up.  This is the case for the "ASEBRK#/ACK" pin on R-Car M2-W,
M2-N, and E2, and the "ACK" pin on RZ/G1M, RZ/G1N, RZ/G1E, and RZ/G1C.
To describe such a register, SoC-specific drivers need to provide two
instances of pinmux_bias_reg: a first one with the puen field filled in,
listing pins with pull-up functionality, and a second one with the pud
field filled in, listing pins with pull-down functionality.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-6-geert+renesas@glider.be

pinctrl: renesas: Add PORT_GP_CFG_7 macros

Add PORT_GP_CFG_7() and PORT_GP_7() helper macros, to be used by the
r8a7791 subdriver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-5-geert+renesas@glider.be

pinctrl: renesas: Factor out common R-Mobile bias handling

The pin control sub-drivers for SH/R-Mobile SoCs contain almost
identical bias handling.  The only SoC-specific part is the mapping from
pin numbers to PORTnCR registers.

Reduce code duplication by factoring out the bias handling to the common
pinctrl.c code.  Use a callback to handle the pin/register mapping.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-4-geert+renesas@glider.be

pinctrl: renesas: Move R-Car bias helpers to sh_pfc.h

The Renesas Pin Function Controller driver uses two header files:
  - sh_pfc.h, for use by both core code and SoC-specific drivers,
  - core.h, for internal use by the core code only.

Hence move the R-Car bias helper declarations from core.h to sh_pfc.h,
and drop the inclusion of core.h from SoC-specific drivers that no
longer need it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-3-geert+renesas@glider.be

pinctrl: renesas: Make sh_pfc_pin_to_bias_reg() static

Now all R-Car pin control drivers have been converted to the common
R-Car bias handling, sh_pfc_pin_to_bias_reg() is only called from a
single place.  Move it from core.c to pinctrl.c, make it static, and
rename it to rcar_pin_to_bias_reg(), as it is specific to R-Car SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-2-geert+renesas@glider.be

pinctrl: qcom: sc8180x: add ACPI probe support

It adds ACPI probe support for pinctrl-sc8180x driver.  We have one
problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory
resource to cover 3 tiles defined by SC8180X.  To follow the hardware
layout of 3 tiles which is already supported DT probe, it adds one
function to replace the original single memory resource with 3 named
ones for tiles.  With that, We can map memory for ACPI in the same way
as DT.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210311024102.15450-1-shawn.guo@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sm8350: add GPIO wakeup interrupt map

GPIOs that can be configured as wakeup sources, have their interrupt
lines routed to PDC interrupt controller. Provide the interrupt map of
the GPIO to its wakeup capable interrupt parent.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312034218.3324410-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: core: Set ret to 0 when group is skipped

Static analyzer tool found that the ret variable is not initialized but
code expects ret value >=0 when pinconf is skipped in the first pinmux
loop. The same expectation is for pinmux in a pinconf loop.
That's why initialize ret to 0 to avoid uninitialized ret value in first
loop or reusing ret value from first loop in second.

Addresses-Coverity: ("Uninitialized variables")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/e5203bae68eb94b4b8b4e67e5e7b4d86bb989724.1615534291.git.michal.simek@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ti: fix error return code of ti_iodelay_probe()

When ti_iodelay_pinconf_init_dev() fails, no error return code of
ti_iodelay_probe() is assigned.
To fix this bug, ret is assigned with the return value of
ti_iodelay_pinconf_init_dev(), and then ret is checked.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306125122.15043-1-baijiaju1990@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: rockchip: make driver be tristate module

Make pinctrl-rockchip driver to be tristate module, support to build as
a module, this is useful for GKI.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210305003907.1692515-3-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arm64: remove select PINCTRL_ROCKCHIP from ARCH_ROCKCHIP

Prepare to make pinctrl driver of rockchip to be module able, this patch
remove the select of PINCTRL_ROCKCHIP from ARCH_ROCKCHIP.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210305003907.1692515-2-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

kernel/irq: export irq_gc_set_wake

Module driver may use irq_gc_set_wake.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210305080658.2422114-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: core: Handling pinmux and pinconf separately

Right now the handling order depends on how entries are coming which is
corresponding with order in DT. We have reached the case with DT overlays
where conf and mux descriptions are exchanged which ends up in sequence
that firmware has been asked to perform configuration before requesting the
pin.

The patch is enforcing the order that pin is requested all the time first
followed by pin configuration. This change will ensure that firmware gets
requests in the right order.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cfbe01f791c2dd42a596cbda57e15599969b57aa.1615364211.git.michal.simek@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: spmi-gpio: Add support for PM8350 and friends

Add support for the PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B GPIO support to the Qualcomm PMIC GPIO driver.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210308164845.3210393-2-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8350 and friends

Add support for the PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B GPIO support to the Qualcomm PMIC GPIO binding.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210308164845.3210393-1-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

docs/pinctrl: document debugfs files

Document debugfs directories and files created for pinctrl subsystem.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210302053059.1049035-5-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation: rename pinctl to pin-control

pinctl is not ideal as pinctrl (with an 'r') is much more common. Linus
state that pin-control.rst would be the best name for the documentation.

Link: https://lore.kernel.org/linux-gpio/20210126050817.GA187797@x1/#t
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210302053059.1049035-4-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinmux: Add pinmux-select debugfs file

Add "pinmux-select" to debugfs which will activate a pin function for a
given pin group:

  echo "<group-name function-name>" > pinmux-select

The write operation pinmux_select() handles this by checking that the
names map to valid selectors and then calling ops->set_mux().

The existing "pinmux-functions" debugfs file lists the pin functions
registered for the pin controller. For example:

  function: pinmux-uart0, groups = [ pinmux-uart0-pins ]
  function: pinmux-mmc0, groups = [ pinmux-mmc0-pins ]
  function: pinmux-mmc1, groups = [ pinmux-mmc1-pins ]
  function: pinmux-i2c0, groups = [ pinmux-i2c0-pins ]
  function: pinmux-i2c1, groups = [ pinmux-i2c1-pins ]
  function: pinmux-spi1, groups = [ pinmux-spi1-pins ]

To activate function pinmux-i2c1 on group pinmux-i2c1-pins:

  echo "pinmux-i2c1-pins pinmux-i2c1" > pinmux-select

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210302053059.1049035-3-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: use to octal permissions for debugfs files

Switch over pinctrl debugfs files to use octal permissions as they are
preferred over symbolic permissions. Refer to commit f90774e1fd27
("checkpatch: look for symbolic permissions and suggest octal instead").

Note: S_IFREG flag is added to the mode by __debugfs_create_file()
in fs/debugfs/inode.c

Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210302053059.1049035-2-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ingenic: add missing call to of_node_put()

In one of the error paths of the for_each_child_of_node() loop in
ingenic_gpio_probe, add missing call to of_node_put().

Fix the following coccicheck warning:
./drivers/pinctrl/pinctrl-ingenic.c:2485:1-23: WARNING: Function
"for_each_child_of_node" should have of_node_put() before return around
line 2489.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1614303297-24178-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: rockchip: clear int status when driver probed

Some devices may do gpio interrupt trigger and make an int status before
pinctrl driver probed, then the gpio handler will keep complain untill
the device driver works to stop trigger.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210223101937.273085-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map

GPIOs that can be configured as wakeup sources, have their
interrupt lines routed to PDC interrupt controller.

Provide the interrupt map of the GPIO to its wakeup capable
interrupt parent.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1613105974-28181-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: stm32: add missing of_node_put

Fix OF node leaks by calling of_node_put in
for_each_available_child_of_node when the cycle returns.

Generated by: scripts/coccinelle/iterators/for_each_child.cocci

Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210215103643.898-1-angkery@163.com
Acked-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: armada-cp110 - fix MPP54/MPP55 functions

The function name is used for selecting MPP functionality and
should be unique within function names of the same pin.
This patch fixes function names for MPP54 and MPP55 that
have two different functions named the same.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20210216113118.17484-3-kostap@marvell.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: cp110-system-controller: fix the pin function names

Fix the pin function names for MPP54 and MPP55.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20210216113118.17484-2-kostap@marvell.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: equilibrium: add missing of_node_put

Fix OF node leaks by calling of_node_put in
for_each_child_of_node when the cycle returns.

Generated by: scripts/coccinelle/iterators/for_each_child.cocci

Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210216080231.1303-1-angkery@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: r8a77965: Add vin4_g8 and vin5_high8 pins

This patch adds vin4_g8 and vin5_high8 support to the R8A77965 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a77990: Add vin4_g8 and vin5_high8 pins

This patch adds vin4_g8 and vin5_high8 support to the R8A77990 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a7796: Add vin4_g8 and vin5_high8 pins

This patch adds vin4_g8 and vin5_high8 support to the R8A7796 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a77951: Add vin4_g8 and vin5_high8 pins

This patch adds vin4_g8 and vin5_high8 support to the R8A77951 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: intel: Show the GPIO base calculation explicitly

During the split of intel_pinctrl_add_padgroups(), the _by_size() variant
missed the GPIO base calculations and hence made unable to retrieve proper
GPIO number.

Assign the gpio_base explicitly in _by_size() variant.

While at it, differentiate NOMAP case with the rest in _by_gpps() variant.

Fixes: 036e126c72eb ("pinctrl: intel: Split intel_pinctrl_add_padgroups() for better maintenance")
Reported-and-tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Linux 5.12-rc2

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Merge tag 'gcc-plugins-v5.12-rc2' of git://git./linux/kernel/git/kees/linux

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Merge tag 'pstore-v5.12-rc2' of git://git./linux/kernel/git/kees/linux

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()

Merge tag 'for-5.12/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size

Merge tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe fixes:
      - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
        Terjan)
      - fix a hwmon error return (Daniel Wagner)
      - fix the keep alive timeout initialization (Martin George)
      - ensure the model_number can't be changed on a used subsystem
        (Max Gurtovoy)

 - rsxx missing -EFAULT on copy_to_user() failure (Dan)

 - rsxx remove unused linux.h include (Tian)

 - kill unused RQF_SORTED (Jean)

 - updated outdated BFQ comments (Joseph)

 - revert work-around commit for bd_size_lock, since we removed the
   offending user in this merge window (Damien)

* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
  rsxx: Return -EFAULT if copy_to_user() fails
  block/bfq: update comments and default value in docs for fifo_expire
  rsxx: remove unused including <linux/version.h>
  block: Drop leftover references to RQF_SORTED
  block: revert "block: fix bd_size_lock use"

Merge tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "A bit of a mix between fallout from the worker change, cleanups and
  reductions now possible from that change, and fixes in general. In
  detail:

   - Fully serialize manager and worker creation, fixing races due to
     that.

   - Clean up some naming that had gone stale.

   - SQPOLL fixes.

   - Fix race condition around task_work rework that went into this
     merge window.

   - Implement unshare. Used for when the original task does unshare(2)
     or setuid/seteuid and friends, drops the original workers and forks
     new ones.

   - Drop the only remaining piece of state shuffling we had left, which
     was cred. Move it into issue instead, and we can drop all of that
     code too.

   - Kill f_op->flush() usage. That was such a nasty hack that we had
     out of necessity, we no longer need it.

   - Following from ->flush() removal, we can also drop various bits of
     ctx state related to SQPOLL and cancelations.

   - Fix an issue with IOPOLL retry, which originally was fallout from a
     filemap change (removing iov_iter_revert()), but uncovered an issue
     with iovec re-import too late.

   - Fix an issue with system suspend.

   - Use xchg() for fallback work, instead of cmpxchg().

   - Properly destroy io-wq on exec.

   - Add create_io_thread() core helper, and use that in io-wq and
     io_uring. This allows us to remove various silly completion events
     related to thread setup.

   - A few error handling fixes.

  This should be the grunt of fixes necessary for the new workers, next
  week should be quieter. We've got a pending series from Pavel on
  cancelations, and how tasks and rings are indexed. Outside of that,
  should just be minor fixes. Even with these fixes, we're still killing
  a net ~80 lines"

* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
  io_uring: don't restrict issue_flags for io_openat
  io_uring: make SQPOLL thread parking saner
  io-wq: kill hashed waitqueue before manager exits
  io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
  io_uring: don't keep looping for more events if we can't flush overflow
  io_uring: move to using create_io_thread()
  kernel: provide create_io_thread() helper
  io_uring: reliably cancel linked timeouts
  io_uring: cancel-match based on flags
  io-wq: ensure all pending work is canceled on exit
  io_uring: ensure that threads freeze on suspend
  io_uring: remove extra in_idle wake up
  io_uring: inline __io_queue_async_work()
  io_uring: inline io_req_clean_work()
  io_uring: choose right tctx->io_wq for try cancel
  io_uring: fix -EAGAIN retry with IOPOLL
  io-wq: fix error path leak of buffered write hash map
  io_uring: remove sqo_task
  io_uring: kill sqo_dead and sqo submission halting
  io_uring: ignore double poll add on the same waitqueue head
  ...

Merge tag 'pm-5.12-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix the usage of device links in the runtime PM core code and
  update the DTPM (Dynamic Thermal Power Management) feature added
  recently.

  Specifics:

   - Make the runtime PM core code avoid attempting to suspend supplier
     devices before updating the PM-runtime status of a consumer to
     'suspended' (Rafael Wysocki).

   - Fix DTPM (Dynamic Thermal Power Management) root node
     initialization and label that feature as EXPERIMENTAL in Kconfig
     (Daniel Lezcano)"

* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization
  PM: runtime: Update device status before letting suppliers suspend

Merge tag 'acpi-5.12-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Make the empty stubs of some helper functions used when CONFIG_ACPI is
  not set actually match those functions (Andy Shevchenko)"

* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Constify is_acpi_node() and friends (part 2)

Merge tag 'iommu-fixes-v5.12-rc1' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - Fix a sleeping-while-atomic issue in the AMD IOMMU code

 - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
   driver

 - Fix status code definitions for Intel VT-d

 - Fix IO Page Fault issue in Tegra IOMMU driver

* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix status code for Allocate/Free PASID command
  iommu: Don't use lazy flush for untrusted device
  iommu/tegra-smmu: Fix mc errors on tegra124-nyan
  iommu/amd: Fix sleeping in atomic in increase_address_space()

Merge tag 'for-5.12-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "More regression fixes and stabilization.

  Regressions:

   - zoned mode
      - count zone sizes in wider int types
      - fix space accounting for read-only block groups

   - subpage: fix page tail zeroing

  Fixes:

   - fix spurious warning when remounting with free space tree

   - fix warning when creating a directory with smack enabled

   - ioctl checks for qgroup inheritance when creating a snapshot

   - qgroup
      - fix missing unlock on error path in zero range
      - fix amount of released reservation on error
      - fix flushing from unsafe context with open transaction,
        potentially deadlocking

   - minor build warning fixes"

* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: do not account freed region of read-only block group as zone_unusable
  btrfs: zoned: use sector_t for zone sectors
  btrfs: subpage: fix the false data csum mismatch error
  btrfs: fix warning when creating a directory with smack enabled
  btrfs: don't flush from btrfs_delayed_inode_reserve_metadata
  btrfs: export and rename qgroup_reserve_meta
  btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
  btrfs: fix spurious free_space_tree remount warning
  btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
  btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
  btrfs: ref-verify: use 'inline void' keyword ordering

Merge tag 'devicetree-fixes-for-5.12-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Another batch of graph and video-interfaces schema conversions

 - Drop DT header symlink for dropped C6X arch

 - Fix bcm2711-hdmi schema error

* tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: media: Use graph and video-interfaces schemas, round 2
  dts: drop dangling c6x symlink
  dt-bindings: bcm2711-hdmi: Fix broken schema

Merge tag 'trace-v5.12-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Functional fixes:

   - Fix big endian conversion for arm64 in recordmcount processing

   - Fix timestamp corruption in ring buffer on discarding events

   - Fix memory leak in __create_synth_event()

   - Skip selftests if tracing is disabled as it will cause them to
     fail.

  Non-functional fixes:

   - Fix help text in Kconfig

   - Remove duplicate prototype for trace_empty()

   - Fix stale comment about the trace_event_call flags.

  Self test update:

   - Add more information to the validation output of when a corrupt
     timestamp is found in the ring buffer, and also trigger a warning
     to make sure that tests catch it"

* tag 'trace-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix comment about the trace_event_call flags
  tracing: Skip selftests if tracing is disabled
  tracing: Fix memory leak in __create_synth_event()
  ring-buffer: Add a little more information and a WARN when time stamp going backwards is detected
  ring-buffer: Force before_stamp and write_stamp to be different on discard
  tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig
  tracing: Remove duplicate declaration from trace.h
  ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount

RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()

In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed.  The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.

Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()

rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter.  This code is
cleaned up to be clearer and easier to read.

Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Fix missed IB reference counting in loopback

When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.

Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

io_uring: don't restrict issue_flags for io_openat

45d189c606292 ("io_uring: replace force_nonblock with flags") did
something strange for io_openat() slicing all issue_flags but
IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the
flags.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme into block-5.12

Pull NVMe fixes from Christoph:

"nvme fixes for 5.12:

 - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan)
 - fix a hwmon error return (Daniel Wagner)
 - fix the keep alive timeout initialization (Martin George)
 - ensure the model_number can't be changed on a used subsystem
   (Max Gurtovoy)"

* tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.