drm/amd/display: use full surface update when stream is NULL

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix missing irq refactor causing potential i2c race

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix for tile MST

- Set stream signal type to be SST when setting non-tile timing on MST
  tiled display.
  - Disable MST on sink after disabling MST link.
  - Enable MST on sink before enabling MST link.

Signed-off-by: Ding Wang <Ding.Wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set NULL value during removal for remoteSink

In MST case during removal of remote sink its descriptor pointer wasn't freed corectly.

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change mpo surface update check condition.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add same check as reset pipes for programing backend regs.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding dm controlled signal type in dc_stream

- Adding dm controlled signal type in dc_stream
- Adding fallback to dvi signal when output signal is hdmi and the connector
  type is not

Signed-off-by: Sylvia Tsai <sylvia.tsai@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sylvia Tsai <Sylvia.Tsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Memory was freed twice during disable

1. get_ss_info_from_atombios function was allocating the memory populating the provided pointer
but them freeing the memory.
Since the pointer was return as a valid value, we are trying to free the same memory during clock resource destruction

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix hotspot programming during set cursor position.

- Remove x,y hotspot from dc_cursor_attributes. Only program it
  through setPosition.

Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Zeyu Fan <Zeyu.Fan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: adding FCLK and DPPCLK clock types

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prevent premature pageflip when comitting in vblank. (v3)

Make sure we do not program a hw pageflip inside vblank 'n' iff the
atomic flip is comitted while inside the same vblank 'n'. We must
defer such a flip by one refresh cycle to vblank 'n+1', unless this
is a DRM_MODE_PAGE_FLIP_ASYNC async pageflip, which must always
execute as soon as possible.

Without this, pageflips programmed via X11 GLX_OML_sync_control extensions
glXSwapBuffersMscOML(..., target_msc, ...); call and/or via DRI3/Present
PresentPixmap(..., target_msc, ...); request will complete one vblank
too early whenever target_msc > current_msc + 1, ie. more than 1 vblank
in the future. In such a case, the call of the pageflip ioctl() would be
triggered by a queued drmWaitVblank() vblank event, which itself gets
dispatched inside the vblank one frame before the target_msc vblank.

Testing with this patch does no longer show any problems with
OML_sync_control swap scheduling or flip completion timestamps.
Tested on R9 380 Tonga.

v2: Add acked/r-b by Harry and Michel.
v3: Feedback from Andrey: Must not wait an extra frame for
    DRM_MODE_PAGE_FLIP_ASYNC flips.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> (v1)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix race between vblank irq and pageflip irq. (v2)

Since DC now uses CRTC_VERTICAL_INTERRUPT0 as VBLANK irq trigger
and vblank interrupts actually happen earliest at start of vblank,
instead of a bit before vblank, we no longer need some of the
fudging logic to deal with too early vblank irq handling (grep for
lb_vblank_lead_lines). This itself fixes a pageflip scheduling
bug in DC, caused by uninitialized  use of lb_vblank_lead_lines,
with a wrong startup value of 0. Thanks to the new vblank irq
trigger this value of zero is now actually correct for DC :).

A new problem is that vblank irq's race against pflip irq's,
and as both can fire at first line of vblank, it is no longer
guaranteed that vblank irq handling (therefore -> drm_handle_vblank()
-> drm_update_vblank_count()) executes before pflip irq handling
for a given vblank interval when a pageflip completes. Therefore
the vblank count and timestamps emitted to user-space as part of
the pageflip completion event will be often stale and cause new
timestamping and swap scheduling errors in user-space.

This was observed with large frequency on R9 380 Tonga Pro.

Fix this by enforcing a vblank count+timestamp update right
before emitting the pageflip completion event from the pflip
irq handler. The logic in core drm_update_vblank_count() makes
sure that no redundant or conflicting updates happen, iow. the
call turns into a no-op if it wasn't needed for that vblank,
burning a few microseconds of cpu time though.

Successfully tested on AMD R9 380 "Tonga Pro" (VI/DCE 10)
with DC enabled on the current DC staging branch. Independent
measurement of pageflip completion timing with special hardware
measurement equipment now confirms correct pageflip timestamps
and counts in the pageflip completion events.

v2: Review comments by Michel, drop outdated paragraph
    about problem already fixed in 2nd patch of the series.
    Add acked/r-b by Harry and Michel.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> (v1)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: get_atomic_property missing for drm_connector_funcs

DRM_IOCTL_MODE_GETCONNECTOR fails with EINVAL on enabling DRIVER_ATOMIC
With this DRM_IOCTL_MODE_GETCONNECTOR returns all the connector properties.
freesync_property and freesync_capable_property return 0 currently.

TESTS(On Chromium OS on Stoney Only)
* Builds without compilation errors.
* 'atomictest' proceeds after applying patch and fails with vblank event
timed out.
* Chromium OS ui comes up.

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fallback on legacy properties in atomic_get_properties

We still rely on legacy properties. Fallback on legacy properties until
we get to pull these into some atomic state.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow planes on all crtcs

4.9 kernel will always add the assigned crtc to possible_crtcs on a
plane. This is no longer the case on newer kernels. Make sure we allow
any plane on any crtc.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix nullptr on vega initialization

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix s3 hang on resume.

Avoid enabling CRTC_VERTICAL_INTERRUPT0 twice on resume.
It's enabled once from within manage_dm_interrupts in mode set
and another explicitly from amdgpu_dm_irq_resume_late.
Seems it lead to CRTC hang.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Log clock source in error condition

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ignore visible flag when check surface update type.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fill in vrefresh and min_vblank_time for dce8/dce10

PPLib is now calling into DC to get vrefresh and min_vblank_time, but
since full bandwidth calcs are missing for those generations, the pplib
structures were never being filled. This change fills the currently
required fields to prevent screen corruption.

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: PSR Aux Channel and Static Screen Support Fix

- Correct the aux channel selection according to DAL3

Signed-off-by: Amy Zhang <Amy.Zhang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor edid read.

Allow Linux to use DRM provided EDID read functioality
by moving  DAL edid implementation to module hence
removing this code from DC by this cleaning up DC
code for upstream.

v2: Removing ddc_service. No more need for it.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix i2c write flag.

I2C_M_RD was translated to write instead of read.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove get_connector_for_sink.

Keep 1:1 relation between MST sink and it's MST connector.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove get_connector_for_link.

We can keep a 1:1 relation between a link and a physical
connector and hence skip the iteration. This function
is used in context of only physical connetors.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dce_calc surface pitch setting for non underlay pipes

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Temporary disable PSR for HBR2 & HBR3

Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor member referencing to improve readability

Signed-off-by: Reza Amini <reza.amini@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove surface validation against stream rect

Surface information is by default copied from old context in dc_commit_stream.
Thus unchange streams will not be affected. For new streams, we shouldn't
validate the new mode against the surface configuration of old_context.

Signed-off-by: Reza Amini <reza.amini@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update plane functionalities

This patch introduces amdgpu_drm_plane_state
structure, which subclasses drm_plane_state and
holds data suitable for configuring hardware.

It switches reset(), atomic_duplicate_state()
& atomic_destroy_state() functions to new internal
implementation, earlier they were pointing to
drm core functions.

TESTS(On Chromium OS on Stoney Only)
* Builds without compilation errors.
* 'plane_test' passes for XR24 format
  based Overlay plane.
* Chromium OS ui comes up.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix cleanup in amdgpu_dm_initialize_drm_device

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: decouple per-crtc-plane model

Current design has per-crtc-plane model.
As a result, for asic's that support underlay,
are unable to expose it to user space for modesetting.

To enable this, the drm driver intialisation now runs
for number of surfaces instead of stream/crtc.

This patch plumbs surface capabilities to drm framework
so that it can be effectively used by user space.

Tests: (On Chromium OS for Stoney Only)
* 'modetest -p'  now shows additional plane
  with YUV capabilities in case of CZ and ST.
* 'plane_test' fails with below error:
  [drm:amdgpu_dm_connector_atomic_set_property [amdgpu]] *ERROR* Unsupported screen depth 0
  as ther is no support for YUYV
* Checked multimonitor display works fine

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: obtain usHBR3En bit from BP 1

ASICs using bios parser 1 don't check HBR3 capability as there is no such
a bit usHBR3En in ATOM_ENCODER_CAP_RECORDER.
Therefore, will use ATOM_ENCODER_CAP_RECORDER_V2 and thus obtain the usHBR3En
bit.

Signed-off-by: Ding Wang <ding.wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: stereo support

Frame sequential, top-bottom and side-by-side support.

Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use CP2520-3 for PHY compliance automation

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix MPO exit and cursor issue.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: increase timeout for dmif dealloc

In some use-cases, e.g. multiple 4K displays,
exisitng wait time for reg update of 30msec timed out
during mode setiing that sometimes resulted in system bad state
as we continue without waiting for registry update complete.
Increasing timeout to 35msec fixes that problem.

Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: voltage request related change

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use CRTC_VERTICAL_INTERRUPT0 as a trigger for VBLANK.

Register ISR hnadler on the new interrupt.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use CRTC_VERTICAL_INTERRUPT0 as VBLANK trigger.

VBLANK interrupt is driven bu line buffer vcounter which is
ahead of CRTC vcounter. Use an interrupt that fires at the actual
CRTC vblank start boundry.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename bandwidth_calcs.h to dce_calcs.h

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Power on front end during set mode.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add audio/video ContainerId implementation

Leave hardcoded if no ContainerId provided by DM.

Signed-off-by: Duke Du <Duke.Du@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: using calculated values for VReady/Startup

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove redundant check

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DP is hotplugged, HDMI with 4:2:0 corruption

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix applying surface to underlay pipe

1. Locking all pipes before doing any changes
2. Applying surface for both top and bottom pipes

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set cursor pitch to cursor width (in pixels).

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Unhardcode cursor size reported back to UMD.

This will return back MAX cursor size for given ASIC.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Unhardcode acrtc->max_cursor_{height,width}

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix gfx9 parameters reading for DC.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix the NULL pointer. (v2)

ret value in amdgpu_dm_atomic_check was not rest to EINVAL
after drm_atomic_add_affected_planes and by this making
any subsequent validation failure pass when returning
to atomic_check.

v2: Add WARN_ON print for dc_commit_streams in
amdgpu_dm_atomic_commit_tail since this should never
fail.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: support PHY compliance automation for CP2520 pattern 1/2/3

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: support CP2520 pattern 2 for HBR2 compliance

- also some clean up

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use stream_enc to get head pipe.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove dc_pre_update_surfaces_to_stream from dc use

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use extended receiver cap for dpcd ver

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: changing the dc_update_surfaces_and_stream

1. Adding the ability to update the stream parameters during FULL_UPDATE type

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix bw calc internal initialization error

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed bandwidth calculation error when converting fractions

[Problem]
VSR greyed out

[Root cause]
When converting fractions, we were using the integer function, which let to
a large display clock and the view was not supported

[Solution]
Change the integer to fraction functions

Signed-off-by: Logatharshan Thothiralingam <logatharshan.thothiralingam@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: adding new dc_update_surfaces_and_stream

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc15: enable dc on vega10

Add the DC display module to drive the DCE12 IP on vega10.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove DCE12 guards

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Less log spam

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: need to handle DCE_Info table ver4.2

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DCE12 support

This wires DCE12 support into DC and enables it.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCE12 core support

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCE12 irq support

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCE12 i2c/aux support

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCE12 gpio support

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCE12 bios parser support

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: get display info from DC when DC enabled.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix incorrect vp adjustment

Viewport would be incorrectly adjusted when surface was used
for multiple displays

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Less log spam

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix viewport adjustment on rotated surface

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix hsplit viewport calculation for rotated/mirrored usecases

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add init calculation to scaler params

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor on dc_sink structure.

Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Switch to DRM helpers in s3.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not copy bottom pipe when map resource.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: After program backend, also program front end regs.

Issue:
In case of two 4K@60 + one non-4k monitor, when unplug non-4k monitor,
the remain two 4k monitor don't work properly.
Reason:
In that case, two 4k use two pipes and no split, when unplug happens,
those two monitor will use 4 pipes and split, but on that time, frontend
is not programed properly.
Solution:
After programed backend, front end should be programmed as per new pipe
setting.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: TPS4 logic typo fix

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move refclk from dc to resource_pool

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Memory leak fix during disable

1.current_context memory wasn't released at
dc_post_update_surfaces_to_stream during context swap.

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refclock from bios firmwareInfoTable

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify some DMCU waits

Signed-off-by: Amy Zhang <Amy.Zhang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding FastUpdate functionality

Exposing DC Api dc_check_update_surfaces_for_stream
validation will return the answer which type of update is required,
so upper layers can is it safe to call the update API fro high IRQ yes/no.

Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: sometime VtotalMin less than VTotal (rounding issue)

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove independent lock as we have no use case today

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up and simply locking logic

always take update lock instead of using HW built in update
lock trigger with write to primary_addr_lo.

we will be a little more inefficient with the extra registers
write to lock, but this simplify code and make it always correct.

Will revisit locking optimization once update sequence mature

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove page_fleep_needed function.

This function makes a lot of assumptions to try and deduce
tha an atomic_commit came from FLIP ioctl. Those assumptions
are not explicit contract with DRM API and might lead to wrong
result as the code changes. Instead use drm_atomic_state.allow_modeset
flag which explicitly is set to false only in atomic flip
helper function, otherwise this flag is always true.
P.S When we get to do actual atomic IOCTL this will have to be revised
with the atomic call behavior.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor headless to use atomic commit. (v2)

Headless mode set needs to be synchronized against outstanding nonblocking
commits. This achieved by building atomic state and commiting it.

v2: rebase on 4.11

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Pulling old prepare and submit for flip back"

This reverts commit 0eb4667a073e.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor atomic commit implementation. (v2)

Modify amdgpu_dm_atomic_comit to implement
atomic_comit_tail hook.
Unify Buffer objects allocation and dealocation
for surface updates and page flips.
Simplify wait for fences and target_vbank logic
for non blockiing commit.
Remove hacky update surface to page flip synchronization
we had and rely on atomic framework synchronization logic.

v2:
Add state->allow_modeset as indicator of page flip call.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: extended the programming sequence to VFlip as well

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: We don't support interlace and doublescan

Don't tell DRM otherwise.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: freesync pipe split :VTotal_Min_Mask for Hflip/lock.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused define from amdgpu_dm_types

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use amdgpu mode funcs statically

No need to assign them dynamically. This is much more readable.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dce100_validate_bandwidth return value

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>