Tomasz Bursztyka [Mon, 11 Oct 2010 13:57:07 +0000 (16:57 +0300)]
Added support for "auto" and "manual" proxy.
Cristiano Fernandes [Mon, 11 Oct 2010 22:35:38 +0000 (00:35 +0200)]
Using netlink to set and clear ipv6 addresses
Cristiano Fernandes [Mon, 11 Oct 2010 22:34:39 +0000 (00:34 +0200)]
Using netlink to set and clear ipv4 addresses
Using netlink to set and clear ipv4 configuration avoids connman from
sending multiple IPv4 signals through DBus with the wrong configuration,
since the configuration are set all at once triggering only one netlink
event.
Daniel Wagner [Mon, 11 Oct 2010 11:58:02 +0000 (13:58 +0200)]
Open stats file late and close them early
Instead of opening stats file when a service is created,
defer it to the point where either __connman_ipconfig_enable
or __connman_ipconfig_disable is called.
Kalle Valo [Mon, 11 Oct 2010 12:12:10 +0000 (15:12 +0300)]
simple-agent: update to new agent api
simple-agent was still using the old agent api and didn't work anymore.
Update it to use the new api.
Tomasz Bursztyka [Mon, 11 Oct 2010 07:09:16 +0000 (10:09 +0300)]
Added a test tool for proxy configuration (set-proxy)
Daniel Wagner [Mon, 11 Oct 2010 09:17:03 +0000 (11:17 +0200)]
Initialize struct stat in error case correctly
In the case stat failes to gather information
about the log file, it has to initialize struct
stat. Otherwise, we will set a random file size.
Daniel Wagner [Fri, 8 Oct 2010 15:31:48 +0000 (17:31 +0200)]
Remove unnecessary pre initializing
Samuel Ortiz [Fri, 8 Oct 2010 21:36:44 +0000 (23:36 +0200)]
Release counter and session watches whe unregistering
Releasing the watches from the hash table freeing routines lead to double
freeing the interface data watch pointer in case the owner would disappear
before unregistering.
Samuel Ortiz [Fri, 8 Oct 2010 16:59:16 +0000 (18:59 +0200)]
inet: Remove __connman_inet_get_device_type
The routine is replaced by __connman_rtnl_get_device_type.
Samuel Ortiz [Fri, 8 Oct 2010 16:53:08 +0000 (18:53 +0200)]
rtnl: Export device type detection routine
Since ConnMan is now relying only on rtnl for device detection, the rtnl.c
code should be responsible for providing device types. And this is done by
parsing the device uevent DEVTYPE label.
Samuel Ortiz [Fri, 8 Oct 2010 15:23:38 +0000 (17:23 +0200)]
device: Set blocked field depending on the technology status
If a device is created before any rfkill event is received, it will not
be blocked. Otherwise, it will mirror the technology blocked status.
Samuel Ortiz [Fri, 8 Oct 2010 15:22:57 +0000 (17:22 +0200)]
technology: Add technology blocked field getter
Samuel Ortiz [Fri, 8 Oct 2010 13:52:45 +0000 (15:52 +0200)]
technology: Do not update a technology blocked counter when unchanged
Some buggy rfkill driver send rfkill CHANGE events while the actual rfkill
status has not changed. ConnMan should just ignore those.
Tomasz Bursztyka [Fri, 8 Oct 2010 09:10:29 +0000 (12:10 +0300)]
Small proxy settings rewrite in service API documentation.
leena.gunda@wipro.com [Wed, 6 Oct 2010 13:31:12 +0000 (19:01 +0530)]
Display IPv4/IPv6 gateway in PropertyChanged signal
ConnMan should emit the IP PropertyChanged signal when the IP is set but
also when a route for the device is set.
Fixes BMC#7895
Samuel Ortiz [Thu, 7 Oct 2010 18:10:11 +0000 (20:10 +0200)]
rtnl: Remove unused operstate callback
Samuel Ortiz [Thu, 7 Oct 2010 18:03:48 +0000 (20:03 +0200)]
technology: Block devices based on technology rfkill status
Devices are blocked when their technology is blocked, i.e. all its devices
are rfkilled. They all move back to the unblocked state when all the
technology devices are no longer rfkilled.
Samuel Ortiz [Wed, 6 Oct 2010 16:01:31 +0000 (18:01 +0200)]
technology: Use allocated index for rfkill hash tables keys
Samuel Ortiz [Wed, 6 Oct 2010 09:57:24 +0000 (11:57 +0200)]
technology: Track rfkill blocked state
Tomasz Bursztyka [Thu, 7 Oct 2010 07:40:05 +0000 (10:40 +0300)]
Pretty printers for proxy settings in various test tool.
Marcel Holtmann [Thu, 7 Oct 2010 11:23:44 +0000 (13:23 +0200)]
Another update to proxy configuration API
Tomasz Bursztyka [Thu, 7 Oct 2010 07:40:01 +0000 (10:40 +0300)]
Updating service API documentation about proxy support.
Marcel Holtmann [Wed, 6 Oct 2010 06:38:57 +0000 (08:38 +0200)]
Use nl80211/cfg80211 WiFi configuration by default
Marcel Holtmann [Wed, 6 Oct 2010 06:38:39 +0000 (08:38 +0200)]
Add interface name checks for Virtual Machine Manager
Marcel Holtmann [Mon, 4 Oct 2010 16:08:49 +0000 (18:08 +0200)]
Move GResolv source file sinto GWeb directory
Pekka Pessi [Thu, 23 Sep 2010 19:44:09 +0000 (22:44 +0300)]
rtnl: support isimodem GPRS connections
The isimodem GPRS connections (PHONET_PIPEs) have ARP header type 821.
Pekka Pessi [Fri, 24 Sep 2010 14:22:54 +0000 (17:22 +0300)]
Support -p and -P options with list of plugins
Marcel Holtmann [Mon, 4 Oct 2010 12:36:26 +0000 (14:36 +0200)]
Remove unused __connman_detect_get_blocked function
Marcel Holtmann [Mon, 4 Oct 2010 12:31:58 +0000 (14:31 +0200)]
Remove unused __connman_detect_start function
Marcel Holtmann [Mon, 4 Oct 2010 12:22:18 +0000 (14:22 +0200)]
Remove dependency on udev
Marcel Holtmann [Sun, 3 Oct 2010 09:55:47 +0000 (11:55 +0200)]
Add information if scan has been requested
Marcel Holtmann [Sat, 2 Oct 2010 18:20:19 +0000 (20:20 +0200)]
Add support for systemd service configuration
Marcel Holtmann [Sat, 2 Oct 2010 15:58:45 +0000 (17:58 +0200)]
Add support for installing D-Bus autostart configuration
Marcel Holtmann [Sat, 2 Oct 2010 06:45:00 +0000 (08:45 +0200)]
Release 0.62
Marcel Holtmann [Sat, 2 Oct 2010 05:25:56 +0000 (07:25 +0200)]
Add support for handling DHCP timerserver values from DHCP
Marcel Holtmann [Sat, 2 Oct 2010 05:25:16 +0000 (07:25 +0200)]
Print debug information about DHCP timeserver value if available
Samuel Ortiz [Thu, 30 Sep 2010 22:07:19 +0000 (00:07 +0200)]
TODO update
Samuel Ortiz [Thu, 30 Sep 2010 16:20:58 +0000 (18:20 +0200)]
supplicant: Do not reset passphrase when asociation fails
Resetting the passphrase is redundant as the service will present a
"connect-failed" error string through D-Bus whenever association fails.
Samuel Ortiz [Thu, 30 Sep 2010 14:39:41 +0000 (16:39 +0200)]
supplicant: No need for actively remove network upon disconnection
When being disconnected, ConnMan should just wait for wpa_supplicant scan
results instead of trying to be smart about if the disconnected AP is still
around or not.
wpa_supplicant will try to roam and run periodic scan for that purpose. If
the AP is missing after 2 scans, it's removed from the list, and ConnMan
then removes it from the enabled networks.
Fixes BMC#7730 BMC#7734
Samuel Ortiz [Thu, 30 Sep 2010 14:33:40 +0000 (16:33 +0200)]
Set WiFi task scanning flag when receiving a Scanning event
wpa_supplicant can start scanning without ConnMan telling it to do so (in
the roaming case for example), and thus the task scanning state should be
updated accordingly in that case.
Without this fix the device network list is not refreshed appropriately.
Samuel Ortiz [Thu, 30 Sep 2010 14:18:56 +0000 (16:18 +0200)]
Implement WiFi network driver remove hook
Samuel Ortiz [Wed, 29 Sep 2010 22:41:30 +0000 (00:41 +0200)]
TODO update
Samuel Ortiz [Wed, 29 Sep 2010 17:47:41 +0000 (19:47 +0200)]
Reset WiFi passphrase if association or WPA handshake fails
Samuel Ortiz [Wed, 29 Sep 2010 17:29:22 +0000 (19:29 +0200)]
Define connman_network_set_passphrase
This is needed for the supplicant plugin to reset a service passphrase
when authentication fails.
Samuel Ortiz [Wed, 29 Sep 2010 17:19:14 +0000 (19:19 +0200)]
Export __connman_service_set_passphrase() to ConnMan core
Samuel Ortiz [Tue, 28 Sep 2010 10:43:07 +0000 (12:43 +0200)]
RemoveProvider argument is an object path
Samuel Ortiz [Mon, 27 Sep 2010 23:36:32 +0000 (01:36 +0200)]
Remove providers based on their VPN service path
Samuel Ortiz [Mon, 27 Sep 2010 22:59:52 +0000 (00:59 +0200)]
Set device scanning state to false from the scan callback
If scan fails, the scan callback is called.
When scan results are available, it is called as well.
In both cases, the device is no longer scanning when it's called.
Kalle Valo [Mon, 27 Sep 2010 21:44:34 +0000 (00:44 +0300)]
wifi: use const pointer for a ssid buffer
A pointer for an ssid buffer was incorrectly stored to a non-const pointer.
After fixing this a unneeded cast can be removed.
Kalle Valo [Mon, 27 Sep 2010 21:44:28 +0000 (00:44 +0300)]
wifi: remove unneeded casts
Kalle Valo [Mon, 27 Sep 2010 21:44:21 +0000 (00:44 +0300)]
gsupplicant: fix return value of g_supplicant_interface_get_data()
g_supplicant_interface_get_data() was returning a const void pointer even
though the setter took a non-const pointer. Change get_data() to return
non-const as well.
Kalle Valo [Mon, 27 Sep 2010 21:44:14 +0000 (00:44 +0300)]
gsupplicant: use term managed in object path
gsupplicant uses term "infra" instead of "managed" used by the old
wifi plugin. This forced connman to create a new service instead of using
the stored. For example, wifi_0026b6675606_76616c6f_managed_psk
vs wifi_0026b6675606_76616c6f_infra_psk.
Convert gsupplicant to use term "managed". That way old services work with
the new plugin.
Samuel Ortiz [Mon, 27 Sep 2010 22:00:18 +0000 (00:00 +0200)]
Set the network associating state to false when disconnecting
The gsupplicant based plugin is not setting the network state appropriately
and can trigger an infinite loop between connman_network_set_connected()
and network_disconnect.
Kalle Valo [Mon, 27 Sep 2010 18:38:55 +0000 (21:38 +0300)]
wifi: use connman options to get the wpasupplicant driver
The new gsupplicant based wifi plugin doesn't support -c command-line
switch to make it possible to choose between wext, nl80211 or both. Add
support for this by using connman_option_get_string().
Martin Xu [Sun, 26 Sep 2010 05:48:37 +0000 (13:48 +0800)]
Check device before call connman_device_set_string at ofono plugin
Fixes BMC#6681
Marcel Holtmann [Sun, 26 Sep 2010 08:36:39 +0000 (17:36 +0900)]
udev: Print error when udev support is not available and not disabled
Samuel Ortiz [Fri, 24 Sep 2010 22:16:26 +0000 (00:16 +0200)]
Remove EDNS0 option
Many routers block EDNS0 DNS requests and that leads to a non working
DNS resolver for ConnMan. This option can now be removed and have dnsproxy
fallling back to DNS over TCP for big DNS replies.
The optimal solution would be to keep this option and disable it on the fly
for nameserver paths rejecting EDNS0 packets. Unfortunately ConnMan is not
able to detect those paths at the moment and so simply falls back to DNS
over TCP.
Samuel Ortiz [Fri, 24 Sep 2010 21:59:38 +0000 (23:59 +0200)]
Add support for domain name concatenation on TCP DNS requests
Samuel Ortiz [Fri, 24 Sep 2010 18:48:33 +0000 (20:48 +0200)]
Define protocol_offset() for DNS transport layer offset
Samuel Ortiz [Fri, 24 Sep 2010 18:42:31 +0000 (20:42 +0200)]
Do not access the DNS request buffer if it's NULL
Samuel Ortiz [Fri, 24 Sep 2010 18:39:51 +0000 (20:39 +0200)]
Close TCP DNS connections once the reply is forwarded
This is still sub optimal as the ideal solution would be to keep the TCP
connection opened for a 20-30 seconds for the next DNS over TCP requests.
Samuel Ortiz [Fri, 24 Sep 2010 18:24:04 +0000 (20:24 +0200)]
Stop polling the nameserver TCP socket once we're done with it
Samuel Ortiz [Fri, 24 Sep 2010 16:13:35 +0000 (18:13 +0200)]
Send an error response when the DNS request times out
Samuel Ortiz [Fri, 24 Sep 2010 16:00:48 +0000 (18:00 +0200)]
Add a protocol field to the DNS request structure
This is cleaner than checking for the client socket value.
Samuel Ortiz [Fri, 24 Sep 2010 15:57:55 +0000 (17:57 +0200)]
Send SERVFAIL when nameservers are not listening on TCP port 53
Samuel Ortiz [Fri, 24 Sep 2010 15:33:01 +0000 (17:33 +0200)]
Fix DNS TCP buffer parsing copy paste error
Samuel Ortiz [Fri, 24 Sep 2010 15:18:34 +0000 (17:18 +0200)]
Remove the DNS TCP listener watch when the socket is closed
Samuel Ortiz [Fri, 24 Sep 2010 14:40:44 +0000 (16:40 +0200)]
Factorize dnsproxy listener creation code
Lot of the code was shared between between the TCP and UDP code paths.
Samuel Ortiz [Fri, 24 Sep 2010 14:09:31 +0000 (16:09 +0200)]
Initial DNS over TCP implementation for dnsproxy
Daniel Wagner [Thu, 23 Sep 2010 14:42:00 +0000 (16:42 +0200)]
Fix typo in stats_print_record
Daniel Wagner [Thu, 23 Sep 2010 14:04:36 +0000 (16:04 +0200)]
Fix "invalid file header"
Use stat before open the file to find out if the
file already exists. Only if file exists and
the header is invalid trigger connman_error
Daniel Wagner [Thu, 23 Sep 2010 11:25:18 +0000 (13:25 +0200)]
Put .data files into a separate directory
Lucio Maciel [Wed, 22 Sep 2010 17:54:32 +0000 (14:54 -0300)]
Support multiple interfaces on -i and -I cmdline option.
Support multiple comma-separeted interfaces for -i and -I
command line option. E.g.:
-i eth*,wlan*,ppp* or -I virbr*,usb*,ppp*
Mohamed Abbas [Wed, 22 Sep 2010 11:35:35 +0000 (04:35 -0700)]
Fix bug to remove vpn services when turning offline mode on
This patch will remove all vpn services on offline mode. It also
make sure it exits after releasing all resources.
Fixes BMC #6591
Samuel Ortiz [Wed, 22 Sep 2010 14:49:45 +0000 (16:49 +0200)]
Schedule delayed scan when being disconnected from an AP
When being disconnected from an AP, a delayed scan is scheduled to make
sure the AP is still there. wpa_supplicant removes a BSS from its bss list
when it disappears from the scan results twice in a row.
Fixes BCM #6831
Mohamed Abbas [Wed, 22 Sep 2010 10:25:09 +0000 (12:25 +0200)]
Fix ConnMan crash while disable wifi device
When calling unregister_network() ConnMan sets the network->device pointer
to NULL. That is fine with ESSIDs formed by 1 AP. Otherwise, the eventual
call to __connman_device_decrease_connections() leads to a crash as the
device pointer is NULL.
Fixes BMC #6772
Daniel Wagner [Wed, 22 Sep 2010 10:11:06 +0000 (12:11 +0200)]
Add statistics ring buffer analyze tool
This tool prints the statistic ring buffer.
Daniel Wagner [Tue, 21 Sep 2010 11:33:42 +0000 (13:33 +0200)]
Store stats information into separate files
Currently the statistic information is stored into the profile file.
This results in rewriting the whole file if connann_stats_save is
called. This results in too many disk I/Os for low power devices.
Furthermore, only the current value is stored. There is no way to
find out how many bytes have been transfered in the last month.
First, each service statistic is stored into a separate files under
/var/lib/connman having a *.data extension. This file contains fixed
sized records of stats counters and will be mmap into memory. It is
used like a ring buffer.
If the buffer is full or after a certain period (e.g. a month), the
raw data will be summerized into the *.info file.
Currently the summary is not implented yet. This will be implemented
in the next round of patches.
Marcel Holtmann [Wed, 22 Sep 2010 04:14:39 +0000 (13:14 +0900)]
Don't bother setting 127.0.0.1 as nameserver
Marcel Holtmann [Wed, 22 Sep 2010 04:13:37 +0000 (13:13 +0900)]
Read nameservers from /etc/resolv.conf if none are specified
Marcel Holtmann [Wed, 22 Sep 2010 03:48:28 +0000 (12:48 +0900)]
Add support for setting proxy configuration method
Marcel Holtmann [Wed, 22 Sep 2010 01:46:19 +0000 (10:46 +0900)]
Add method, domainname and nameserver to proxy configuration
Marcel Holtmann [Wed, 22 Sep 2010 00:47:54 +0000 (09:47 +0900)]
Export service functions for retrieving domainname and nameserver
Marcel Holtmann [Tue, 21 Sep 2010 23:24:16 +0000 (08:24 +0900)]
Fix breakage of make distcheck
Lucio Maciel [Tue, 21 Sep 2010 15:20:40 +0000 (17:20 +0200)]
Call remove_network() on unsolicited disconnect
When receiving an unsolicited disconnect (turn-off the AP)
wpa_supplicant starts scanning every 5 seconds looking for the
previously connected ssid.
This causes the grow of the network list since connman will
not remove the unavailable networks if it is not the initiator of
the scan.
Patrik Flykt [Tue, 21 Sep 2010 07:07:51 +0000 (10:07 +0300)]
Remove RequestPassphrase functionality from Agent API
Remove the obsolete __connman_agent_request_passphrase function as the
RequestPassphrase method call has been replaced with RequestInput.
Patrik Flykt [Tue, 21 Sep 2010 07:07:50 +0000 (10:07 +0300)]
Use RequestInput method call when requesting passphrases
Change password query to use RequestInput method call instead of
RequestPassphrase. The supplied passphrase_cb_t function sets the password
returned via Agent API and tries to reconnect to the service.
Patrik Flykt [Tue, 21 Sep 2010 07:07:49 +0000 (10:07 +0300)]
Agent API RequestInput method for requesting passphrases
request_input_passphrase_reply creates and sends an Agent API RequestInput
method call and waits for the method call return. The function expects a
passhphrase_cb_t to be supplied. Only the "Passphrase" dictionary field is
requested by the method call and only the "Passphrase" dictionary field in
the method call return is used.
Patrik Flykt [Tue, 21 Sep 2010 07:07:48 +0000 (10:07 +0300)]
Add connman_service_set_passphrase helper function
Create helper function for setting a service passphrase by factoring out
the code from set_property.
Marcel Holtmann [Tue, 21 Sep 2010 14:43:37 +0000 (23:43 +0900)]
Use proper definition for finding device structure
Marcel Holtmann [Tue, 21 Sep 2010 14:38:53 +0000 (23:38 +0900)]
Use __connman_device_get_service_type for getting service type
Marcel Holtmann [Tue, 21 Sep 2010 14:33:01 +0000 (23:33 +0900)]
Add basic DNS resolving for HTTP operation
Lucas De Marchi [Tue, 21 Sep 2010 12:47:35 +0000 (09:47 -0300)]
Simplify linker script
Version linker scripts support function names and globs, so there's no
need to rely on nm tool to gather the exported symbols.
Marcel Holtmann [Tue, 21 Sep 2010 10:11:52 +0000 (19:11 +0900)]
Use DBUS_CONFDIR variable instead of DBUS_DATADIR
Daniel Wagner [Mon, 20 Sep 2010 14:45:25 +0000 (16:45 +0200)]
Use struct connman_stats_data
Instead of defining all the counters everwhere use
the connman_stats_data struct. This simplifies the
code later for storing and loading the counters
from the storage backend.
Daniel Wagner [Mon, 20 Sep 2010 14:45:24 +0000 (16:45 +0200)]
Handle several counters simultaniously
The current implementation does not handle multiple
counters at the same time correctly. Only the first
counter gets the updates, all others just an empty
dictionary.
For each Counter object the counters have to be
maintained separately.
Marcel Holtmann [Tue, 21 Sep 2010 04:57:46 +0000 (13:57 +0900)]
Add interface string to proxy configuration
Samuel Ortiz [Mon, 20 Sep 2010 16:23:00 +0000 (18:23 +0200)]
Bump wifi_legacy plugin's priority
The legacy wifi plugin is the default one.
Samuel Ortiz [Mon, 20 Sep 2010 16:21:51 +0000 (18:21 +0200)]
Do not register 2 network drivers for the same network type