drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer

There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.

Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.

Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID

Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text

Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller

Changes in v4:
-- split into two patches

Changes in v5:
-- delete empty line between tags

Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516121/
Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/hdmi: Fix the error handling path of msm_hdmi_dev_probe()

If an error occurs after a successful msm_hdmi_get_phy() call, it must be
undone by a corresponding msm_hdmi_put_phy(), as already done in the
remove function.

Fixes: 437365464043 ("drm/msm/hdmi: move msm_hdmi_get_phy() to msm_hdmi_dev_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514847/
Link: https://lore.kernel.org/r/b3f9da097851e2e42a40dc61458aa98c41c88d0d.1670741386.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path

of_icc_get() alloc resources for path1, we should release it when not
need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1.
Defer getting path1 to fix this.

Fixes: b9364eed9232 ("drm/msm/dpu: Move min BW request and full BW disable back to mdss")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514264/
Link: https://lore.kernel.org/r/20221207065922.2086368-1-linmq006@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

dt-bindings: display: msm: Rename mdss node name in example

Follow other YAMLs and replace mdss name into display-subystem.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: b93bdff44a85 ("dt-bindings: display/msm: add support for SM6115")
Fixes: 06097b13ef97 ("dt-bindings: display/msm: split dpu-qcm2290 into DPU and MDSS parts")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/513585/
Link: https://lore.kernel.org/r/20221130200950.144618-2-a39.skl@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

dt-bindings: msm/dsi: Don't require vdds-supply on 10nm PHY

On some SoCs (hello SM6350) vdds-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX/mx.lvl line,
which is voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511889/
Link: https://lore.kernel.org/r/20221116163218.42449-1-konrad.dybcio@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

dt-bindings: msm/dsi: Don't require vcca-supply on 14nm PHY

On some SoCs (hello SM6115) vcca-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX line, which is
voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/513555/
Link: https://lore.kernel.org/r/20221130135807.45028-1-konrad.dybcio@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dpu: Fix some kernel-doc comments

Make the description of @init to @p in dpu_encoder_phys_wb_init()
and remove @wb_roi in dpu_encoder_phys_wb_setup_fb() to clear the below
warnings:

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:139: warning: Excess function parameter 'wb_roi' description in 'dpu_encoder_phys_wb_setup_fb'
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Function parameter or member 'p' not described in 'dpu_encoder_phys_wb_init'
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Excess function parameter 'init' description in 'dpu_encoder_phys_wb_init'

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3067
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511605/
Link: https://lore.kernel.org/r/20221115014902.45240-1-yang.lee@linux.alibaba.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag

Core:
- MSM_INFO_GET_FLAGS support
- Cleaned up MSM IOMMU wrapper code

DPU:
- Added support for XR30 and P010 image formats
- Reworked MDSS/DPU schema, added SM8250 MDSS bindings
- Added Qualcomm SM6115 support

DP:
- Dropped unsane sanity checks

DSI:
- Fix calculation of DSC pps payload

DSI PHY:
- DSI PHY support for QCM2290

HDMI:
- Reworked dev init path

And, as usual, small misc fixes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu1: add support for display on SM6115

Add required display hw catalog changes for SM6115.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/512875/
Link: https://lore.kernel.org/r/20221124001708.25720-3-a39.skl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add support for SM6115

Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
SM6115 platform.
Configuration for DSI/PHY is shared with QCM2290 so compatibles are reused.
Lack of dsi phy supply in example is intended
due to fact on qcm2290, sm6115 and sm6125
this phy is supplied via power domain, not regulator.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/512872/
Link: https://lore.kernel.org/r/20221124001708.25720-2-a39.skl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: fix reading hw revision on db410c platform

Since the commit commit c6122688f265 ("drm/msm/mdp5: stop overriding
drvdata") reading the MDP5 hw revision on db410c will crash the board
as the MDSS_GDSC is not enabled. Revert a part of the offending commit
(moving rpm enablement) and set priv->kms earlier. This make it possible
to use pm_runtime_get_sync() during read_mdp_hw_revision(), which will
power up both the MDP5 and MDSS devices.

Fixes: c6122688f265 ("drm/msm/mdp5: stop overriding drvdata")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512985/
Link: https://lore.kernel.org/r/20221125000213.252115-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: remove unnecessary NULL check

This code was recently refactored in commit and now the "hdmi" pointer
can't be NULL.  Checking for NULL leads to a Smatch warning:

    drivers/gpu/drm/msm/hdmi/hdmi.c:141 msm_hdmi_init()
    warn: variable dereferenced before check 'hdmi' (see line 119)

Fixes: 69a88d8633ec ("drm/msm/hdmi: move resource allocation to probe function")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512163/
Link: https://lore.kernel.org/r/Y3eCqQ2pm1uQnktV@kadam
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-controller-main: Drop redundant phy-names

Adding in msm8939 which is based msm8916 dtsi I stumbled across a binding
check complaining about the phy name for msm8916 which we were reusing for
msm8939.

The currently inconsistent upstream dtsi naming of "dsi" and "dsi-phy" is
not captured in the yaml for this driver.

The driver however doesn't care about the name of DSI phy, hence the yaml
check is redundant.

Both Krzysztof and Rob suggested we could drop the phy-names entirely if it
really isn't a dependency.

So, drop the inconsistent and unnecessary phy-names field from the yaml.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm/dsi-controller-main: allow defining opp-table

Allow defining DSI OPP table inside the DSI controller node.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Prevent signed BPG offsets from bleeding into adjacent bits

The bpg_offset array contains negative BPG offsets which fill the full 8
bits of a char thanks to two's complement: this however results in those
bits bleeding into the next field when the value is packed into DSC PPS
by the drm_dsc_helper function, which only expects range_bpg_offset to
contain 6-bit wide values.  As a consequence random slices appear
corrupted on-screen (tested on a Sony Tama Akatsuki device with sdm845).

Use AND operators to limit these two's complement values to 6 bits,
similar to the AMD and i915 drivers.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508941/
Link: https://lore.kernel.org/r/20221026182824.876933-11-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bits

According to the comment this DPU register contains the bits per pixel
as a 6.4 fractional value, conveniently matching the contents of
bits_per_pixel in struct drm_dsc_config which also uses 4 fractional
bits.  However, the downstream source this implementation was
copy-pasted from has its bpp field stored _without_ fractional part.

This makes the entire convoluted math obsolete as it is impossible to
pull those 4 fractional bits out of thin air, by somehow trying to reuse
the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??).

The rest of the code merely attempts to keep the integer part a multiple
of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel <<
12; already filling up those bits anyway (but not on downstream).

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/508946/
Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Disallow 8 BPC DSC configuration for alternative BPC values

According to the `/* bpc 8 */` comment below only values for a
bits_per_component of 8 are currently hardcoded in place.  This is
further confirmed by downstream sources [1] containing different
constants for other BPC values (and different initial_offset too,
with an extra dependency on bits_per_pixel).  Prevent future mishaps by
explicitly disallowing any other bits_per_component value until the
right parameters are put in place and tested.

[1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/DISPLAY.LA.2.0.r1-08000-WAIPIO.0/msm/sde_dsc_helper.c#L110-139

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508942/
Link: https://lore.kernel.org/r/20221026182824.876933-9-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Account for DSC's bits_per_pixel having 4 fractional bits

drm_dsc_config's bits_per_pixel field holds a fractional value with 4
bits, which all panel drivers should adhere to for
drm_dsc_pps_payload_pack() to generate a valid payload.  All code in the
DSI driver here seems to assume that this field doesn't contain any
fractional bits, hence resulting in the wrong values being computed.
Since none of the calculations leave any room for fractional bits or
seem to indicate any possible area of support, disallow such values
altogether.  calculate_rc_params() in intel_vdsc.c performs an identical
bitshift to get at this integer value.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508938/
Link: https://lore.kernel.org/r/20221026182824.876933-8-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Migrate to drm_dsc_compute_rc_parameters()

As per the FIXME this code is entirely duplicate with what is already
provided inside drm_dsc_compute_rc_parameters(), supposedly because that
function was yielding "incorrect" results while in reality the panel
driver(s?) used for testing were providing incorrect parameters.

For example, this code from downstream assumed dsc->bits_per_pixel to
contain an integer value, whereas the upstream drm_dsc_config struct
stores it with 4 fractional bits.  drm_dsc_compute_rc_parameters()
already accounts for this feat while the panel driver used for testing
[1] wasn't, hence making drm_dsc_compute_rc_parameters() seem like it
was returning an incorrect result.
Other users of dsc->bits_per_pixel inside dsi_populate_dsc_params() also
treat it in the same erroneous way, and will be addressed in a separate
patch.
In the end, using drm_dsc_compute_rc_parameters() spares both a lot of
duplicate code and erratic behaviour.

[1]: https://git.linaro.org/people/vinod.koul/kernel.git/commit/?h=topic/pixel3_5.18-rc1&id=1d7d98ad564f1ec69e7525e07418918d90f247a1

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508939/
Link: https://lore.kernel.org/r/20221026182824.876933-7-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Appropriately set dsc->mux_word_size based on bpc

This field is currently unread but will come into effect when duplicated
code below is migrated to call drm_dsc_compute_rc_parameters(), which
uses the bpc-dependent value of the local variable mux_words_size in
much the same way.

The hardcoded constant seems to be a remnant from the `/* bpc 8 */`
comment right above, indicating that this group of field assignments is
applicable to bpc = 8 exclusively and should probably bail out on
different bpc values, until constants for other bpc values are added (or
the current ones are confirmed to be correct across multiple bpc's).

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508943/
Link: https://lore.kernel.org/r/20221026182824.876933-6-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Reuse earlier computed dsc->slice_chunk_size

dsi_populate_dsc_params() is called prior to dsi_update_dsc_timing() and
already computes a value for slice_chunk_size, whose value doesn't need
to be recomputed and re-set here.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508934/
Link: https://lore.kernel.org/r/20221026182824.876933-5-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Use DIV_ROUND_UP instead of conditional increment on modulo

This exact same math is used to compute bytes_in_slice above in
dsi_update_dsc_timing(), also used to fill slice_chunk_size.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508935/
Link: https://lore.kernel.org/r/20221026182824.876933-4-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Remove repeated calculation of slice_per_intf

slice_per_intf is already computed for intf_width, which holds the same
value as hdisplay.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508933/
Link: https://lore.kernel.org/r/20221026182824.876933-3-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Remove useless math in DSC calculations

Multiplying a value by 2 and adding 1 to it always results in a value
that is uneven, and that 1 gets truncated immediately when performing
integer division by 2 again.  There is no "rounding" possible here.

After that target_bpp_x16 is used to store a multiplication of
bits_per_pixel by 16 which is only ever read to immediately be divided
by 16 again, and is elided in much the same way.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508932/
Link: https://lore.kernel.org/r/20221026182824.876933-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Add phy configuration for QCM2290

The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not
fully compatible with the standard 14nm PHY, so it requires a separate
compatible and config entry.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[DB: rebased and updated commit msg]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/504578/
Link: https://lore.kernel.org/r/20220924121900.222711-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add QCM2290 DSI phy

QCM2290 platform uses the 14nm DSI PHY driver.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/504579/
Link: https://lore.kernel.org/r/20220924121900.222711-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: drop modeset sanity checks

Drop the overly defensive modeset sanity checks of function parameters
which have already been checked or used by the callers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502678/
Link: https://lore.kernel.org/r/20220913085320.8577-11-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bits

According to the comment this DPU register contains the bits per pixel
as a 6.4 fractional value, conveniently matching the contents of
bits_per_pixel in struct drm_dsc_config which also uses 4 fractional
bits.  However, the downstream source this implementation was
copy-pasted from has its bpp field stored _without_ fractional part.

This makes the entire convoluted math obsolete as it is impossible to
pull those 4 fractional bits out of thin air, by somehow trying to reuse
the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??).

The rest of the code merely attempts to keep the integer part a multiple
of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel <<
12; already filling up those bits anyway (but not on downstream).

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/508946/
Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: drop modeset sanity checks

Drop the overly defensive modeset sanity checks of function parameters
which have already been checked or used by the callers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502674/
Link: https://lore.kernel.org/r/20220913085320.8577-10-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: move msm_hdmi_get_phy() to msm_hdmi_dev_probe()

To continue the idea of failing the probe() rather than failing the
bind(), move the call to msm_hdmi_get_phy() function to
msm_hdmi_dev_probe(), so that the driver fails the probe if PHY is not
yet available rather than succeeding the probe and then failing the
bind() with -EPROBE_DEFER.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499652/
Link: https://lore.kernel.org/r/20220826093927.851597-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: don't take extra reference on PHY device

The of_find_device_by_node() already increments the device's usage
count, so there is no need to increment it again using get_device().
Drop this extra get_device().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499648/
Link: https://lore.kernel.org/r/20220826093927.851597-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: move resource allocation to probe function

Rather than having all resource allocation happen in the _bind function
(resulting in possible EPROBE_DEFER returns and component bind/unbind
cycles) allocate and check all resources in _probe function. While we
are at it, use platform_get_irq() to get the IRQ rather than going
through the irq_of_parse_and_map().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499649/
Link: https://lore.kernel.org/r/20220826093927.851597-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: remove duplicated code from a6xx_create_address_space

The function a6xx_create_address_space() is mostly a copy of
adreno_iommu_create_address_space() with added quirk setting. Rework
these two functions to be a thin wrappers around a common helper.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/509614/
Link: https://lore.kernel.org/r/20221102175449.452283-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: move domain allocation into msm_iommu_new()

After the msm_iommu instance is created, the IOMMU domain is completely
handled inside the msm_iommu code. Move the iommu_domain_alloc() call
into the msm_iommu_new() to simplify callers code.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/509615/
Link: https://lore.kernel.org/r/20221102175449.452283-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: drop constant resource names from platform config

All MSM HDMI devices use "core_physical" and "qfprom_physical" names for
register areas. Drop them from the platform config.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499646/
Link: https://lore.kernel.org/r/20220826093927.851597-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: use devres helper for runtime PM management

Use devm_pm_runtime_enable() to enable runtime PM. This way its effect
will be reverted on device unbind/destruction.

Fixes: 6ed9ed484d04 ("drm/msm/hdmi: Set up runtime PM for HDMI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499647/
Link: https://lore.kernel.org/r/20220826093927.851597-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Refactor sc7280_pp location

The sc7280_pp declaration is not located by the other _pp
declarations, but rather hidden around the _merge_3d
declarations. Let's fix this to avoid confusion.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/509153/
Link: https://lore.kernel.org/r/20221028120812.339100-3-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add support for the display on SM8250

Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
SM8250 platform.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508397/
Link: https://lore.kernel.org/r/20221024164225.3236654-13-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add missing device nodes to mdss-* schemas

Add missing device nodes (DSI, PHYs, DP/eDP) to the existing MDSS
schemas.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508391/
Link: https://lore.kernel.org/r/20221024164225.3236654-12-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: split dpu-qcm2290 into DPU and MDSS parts

In order to make the schema more readable, split dpu-qcm2290 into the DPU
and MDSS parts, each one describing just a single device binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508383/
Link: https://lore.kernel.org/r/20221024164225.3236654-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: split dpu-msm8998 into DPU and MDSS parts

In order to make the schema more readable, split dpu-msm8998 into the DPU
and MDSS parts, each one describing just a single device binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508388/
Link: https://lore.kernel.org/r/20221024164225.3236654-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: split dpu-sdm845 into DPU and MDSS parts

In order to make the schema more readable, split dpu-sdm845 into the DPU
and MDSS parts, each one describing just a single device binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508382/
Link: https://lore.kernel.org/r/20221024164225.3236654-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: split dpu-sc7280 into DPU and MDSS parts

In order to make the schema more readable, split dpu-sc7280 into the DPU
and MDSS parts, each one describing just a single device binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508387/
Link: https://lore.kernel.org/r/20221024164225.3236654-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: split dpu-sc7180 into DPU and MDSS parts

In order to make the schema more readable, split dpu-sc7180 into the DPU
and MDSS parts, each one describing just a single device binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508386/
Link: https://lore.kernel.org/r/20221024164225.3236654-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: move common MDSS properties to mdss-common.yaml

Move properties common to all MDSS DT nodes to the mdss-common.yaml.

This extends qcom,msm8998-mdss schema to allow interconnect nodes, which
will be added later, once msm8998 gains interconnect support.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508385/
Link: https://lore.kernel.org/r/20221024164225.3236654-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: move common DPU properties to dpu-common.yaml

Move properties common to all DPU DT nodes to the dpu-common.yaml.

Note, this removes description of individual DPU port@ nodes. However
such definitions add no additional value. The reg values do not
correspond to hardware INTF indices. The driver discovers and binds
these ports not paying any care for the order of these items. Thus just
leave the reference to graph.yaml#/properties/ports and the description.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508384/
Link: https://lore.kernel.org/r/20221024164225.3236654-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add interconnects property to qcom, mdss-smd845

Add interconnects required for the SDM845 MDSS device tree node. This
change was made in the commit c8c61c09e38b ("arm64: dts: qcom: sdm845:
Add interconnects property for display"), but was not reflected in the
schema.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508380/
Link: https://lore.kernel.org/r/20221024164225.3236654-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: add gcc-bus clock to dpu-smd845

Add gcc-bus clock required for the SDM845 DPU device tree node. This
change was made in the commit 111c52854102 ("arm64: dts: qcom: sdm845:
move bus clock to mdp node for sdm845 target"), but was not reflected in
the schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508379/
Link: https://lore.kernel.org/r/20221024164225.3236654-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: split qcom, mdss bindings

Split Mobile Display SubSystem (MDSS) root node bindings to the separate
yaml file. Changes to the existing (txt) schema:
 - Added optional "vbif_nrt_phys" region used by msm8996
 - Made "bus" and "vsync" clocks optional (they are not used by some
   platforms)
 - Added optional resets property referencing MDSS reset
 - Defined child nodes pointing to corresponding reference schema.
 - Dropped the "lut" clock. It was added to the schema by mistake (it is
   a part of mdp4 schema, not the mdss).

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508378/
Link: https://lore.kernel.org/r/20221024164225.3236654-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Add MSM_INFO_GET_FLAGS

In some cases crosvm needs a way to query the cache flags to communicate
them to the guest kernel for guest userspace mapping.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/504453/
Link: https://lore.kernel.org/r/20220923173307.2429872-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use DEFINE_SHOW_ATTRIBUTE to simplify dpu_regset32

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/504252/
Link: https://lore.kernel.org/r/20220922142147.3246649-1-liushixin2@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: stop overriding drvdata

The rest of the code expects that master's device drvdata is the
struct msm_drm_private instance. Do not override the mdp5's drvdata.

Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/508334/
Link: https://lore.kernel.org/r/20221024152642.3213488-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: retry 3 times if set sink to D0 poweer state failed

Bring sink out of D3 (power down) mode into D0 (normal operation) mode
by setting DP_SET_POWER_D0 bit to DP_SET_POWER dpcd register. This
patch will retry 3 times if written to DP_SET_POWER register failed.

Changes in v5:
-- split into two patches

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502536/
Link: https://lore.kernel.org/r/1662999830-13916-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add support for P010 format

Add support for P010 color format. This adds support for both linear and
compressed formats.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/500822/
Link: https://lore.kernel.org/r/20220901203422.217-3-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: replace variable err with len at dp_aux_link_power_up()

drm_dp_dpcd_readb() will return 1 to indicate one byte had been read
successfully. This patch replace variable "err" with "len" have more
correct meaning.

changes in v5:
-- split into 3 patches

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502533/
Link: https://lore.kernel.org/r/1662999830-13916-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add support for XR30 format

Add support for XR30 color format. This supports both linear and
compressed formats.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/500820/
Link: https://lore.kernel.org/r/20220901203422.217-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: less magic numbers in msm_mdss_enable

Replace magic register writes in msm_mdss_enable() with version that
contains less magic and more variable names that can be traced back to
the dpu_hw_catalog or the downstream dtsi files.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489578/
Link: https://lore.kernel.org/r/20220615135935.87381-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Merge remote-tracking branch 'msm/msm-fixes' into HEAD

Merge tag 'drm-next-20221025' of git://linuxtv.org/pinchartl/media into drm-next

Xilinx ZynqMP DisplayPort bridge support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1cdU4HJoy0Pr2sQ@pendragon.ideasonboard.com

drm/nouveau: Remove unused variable

Trivial removal of an unused variable. Not sure how it snuck by me and
build bots in the 7c99616e3fe7.

Fixes: 7c99616e3fe7 ("drm: Remove drm_mode_config::fb_base")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thomas Zimmermann <tzimemrmann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021010703.536318-1-zack@kde.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-2022-10-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 6.2:

UAPI Changes:
  - Documentation for page-flip flags

Cross-subsystem Changes:
  - dma-buf: Add unlocked variant of vmapping and attachment-mapping
    functions

Core Changes:
  - atomic-helpers: CRTC primary plane test fixes
  - connector: TV API consistency improvements, cmdline parsing
    improvements
  - crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper
  - edid: Fixes for HFVSDB parsing,
  - fourcc: Addition of the Vivante tiled modifier
  - makefile: Sort and reorganize the objects files
  - mode_config: Remove fb_base from drm_mode_config_funcs
  - sched: Add a module parameter to change the scheduling policy,
    refcounting fix for fences
  - tests: Sort the Kunit tests in the Makefile, improvements to the
    DP-MST tests
  - ttm: Remove unnecessary drm_mm_clean() call

Driver Changes:
  - New driver: ofdrm
  - Move all drivers to a common dma-buf locking convention
  - bridge:
    - adv7533: Remove dynamic lane switching
    - it6505: Runtime PM support
    - ps8640: Handle AUX defer messages
    - tc358775: Drop soft-reset over I2C
  - ast: Atomic Gamma LUT Support, Convert to SHMEM, various
    improvements
  - lcdif: Support for YUV planes
  - mgag200: Fix PLL Setup on some revisions
  - udl: Modesetting improvements, hot-unplug support
  - vc4: Fix support for PAL-M

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat

Linux 6.1-rc2

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "RISC-V:

   - Fix compilation without RISCV_ISA_ZICBOM

   - Fix kvm_riscv_vcpu_timer_pending() for Sstc

  ARM:

   - Fix a bug preventing restoring an ITS containing mappings for very
     large and very sparse device topology

   - Work around a relocation handling error when compiling the nVHE
     object with profile optimisation

   - Fix for stage-2 invalidation holding the VM MMU lock for too long
     by limiting the walk to the largest block mapping size

   - Enable stack protection and branch profiling for VHE

   - Two selftest fixes

  x86:

   - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl

  selftests:

   - synchronize includes between include/uapi and tools/include/uapi"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools: include: sync include/api/linux/kvm.h
  KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
  KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
  kvm: Add support for arch compat vm ioctls
  RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
  RISC-V: Fix compilation without RISCV_ISA_ZICBOM
  KVM: arm64: vgic: Fix exit condition in scan_its_table()
  KVM: arm64: nvhe: Fix build with profile optimization
  KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
  KVM: arm64: selftests: Fix multiple versions of GIC creation
  KVM: arm64: Enable stack protection and branch profiling for VHE
  KVM: arm64: Limit stage2_apply_range() batch size to largest block
  KVM: arm64: Work out supported block level at compile time

Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"

This reverts commit 72a95859728a7866522e6633818bebc1c2519b17.

It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver.  Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.

Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/utsname_sysctl.c: Fix hostname polling

Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.

Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c.  But apparently journald-systemd
actually uses this to detect hostname changes.

Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Fix raw data handling when perf events are used in bpf

 - Rework how SIGTRAPs get delivered to events to address a bunch of
   problems with it. Add a selftest for that too

* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bpf: Fix sample_flags for bpf_perf_event_output
  selftests/perf_events: Add a SIGTRAP stress test with disables
  perf: Fix missing SIGTRAPs

Merge tag 'sched_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Adjust code to not trip up CFI

 - Fix sched group cookie matching

* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Introduce struct balance_callback to avoid CFI mismatches
  sched/core: Fix comparison in sched_group_cookie_match()

Merge tag 'objtool_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Borislav Petkov:

 - Fix ORC stack unwinding when GCOV is enabled

* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix unreliable stack dump with gcov

Merge tag 'x86_urgent_for_v6.0_rc2' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
 "As usually the case, right after a major release, the tip urgent
  branches accumulate a couple more fixes than normal. And here is the
  x86, a bit bigger, urgent pile.

   - Use the correct CPU capability clearing function on the error path
     in Intel perf LBR

   - A CFI fix to ftrace along with a simplification

   - Adjust handling of zero capacity bit mask for resctrl cache
     allocation on AMD

   - A fix to the AMD microcode loader to attempt patch application on
     every logical thread

   - A couple of topology fixes to handle CPUID leaf 0x1f enumeration
     info properly

   - Drop a -mabi=ms compiler option check as both compilers support it
     now anyway

   - A couple of fixes to how the initial, statically allocated FPU
     buffer state is setup and its interaction with dynamic states at
     runtime"

* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
  perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
  ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
  x86/ftrace: Remove ftrace_epilogue()
  x86/resctrl: Fix min_cbm_bits for AMD
  x86/microcode/AMD: Apply the patch early on every logical thread
  x86/topology: Fix duplicated core ID within a package
  x86/topology: Fix multiple packages shown on a single-package system
  hwmon/coretemp: Handle large core ID value
  x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
  x86/fpu: Exclude dynamic states from init_fpstate
  x86/fpu: Fix the init_fpstate size check with the actual size
  x86/fpu: Configure init_fpstate attributes orderly

Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux

Pull io_uring follow-up from Jens Axboe:
 "Currently the zero-copy has automatic fallback to normal transmit, and
  it was decided that it'd be cleaner to return an error instead if the
  socket type doesn't support it.

  Zero-copy does work with UDP and TCP, it's more of a future proofing
  kind of thing (eg for samba)"

* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
  io_uring/net: fail zc sendmsg when unsupported by socket
  io_uring/net: fail zc send when unsupported by socket
  net: flag sockets supporting msghdr originated zerocopy

Merge tag 'hwmon-for-v6.1-rc2' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - corsair-psu: Fix typo in USB id description, and add USB ID for new
   PSU

 - pwm-fan: Fix fan power handling when disabling fan control

* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Add USB id of the new HX1500i psu
  hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
  hwmon: (corsair-psu) fix typo in USB id description

Merge tag 'i2c-for-6.1-rc2' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "RPM fix for qcom-cci, platform module alias for xiic, build warning
  fix for mlxbf, typo fixes in comments"

* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxbf: depend on ACPI; clean away ifdeffage
  i2c: fix spelling typos in comments
  i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
  i2c: xiic: Add platform module alias

Merge tag 'pci-v6.1-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull pci fixes from Bjorn Helgaas:

 - Revert a simplification that broke pci-tegra due to a masking error

 - Update MAINTAINERS for Kishon's email address change and TI
   DRA7XX/J721E maintainer change

* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
  MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
  Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"

Merge tag 'media/v6.1-2' of git://git./linux/kernel/git/mchehab/linux-media

Pull missed media updates from Mauro Carvalho Chehab:
 "It seems I screwed-up my previous pull request: it ends up that only
  half of the media patches that were in linux-next got merged in -rc1.

  The script which creates the signed tags silently failed due to
  5.19->6.0 so it ended generating a tag with incomplete stuff.

  So here are the missing parts:

   - a DVB core security fix

   - lots of fixes and cleanups for atomisp staging driver

   - old drivers that are VB1 are being moved to staging to be
     deprecated

   - several driver updates - mostly for embedded systems, but there are
     also some things addressing issues with some PC webcams, in the UVC
     video driver"

* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
  media: sun6i-csi: Move csi buffer definition to main header file
  media: sun6i-csi: Introduce and use video helper functions
  media: sun6i-csi: Add media ops with link notify callback
  media: sun6i-csi: Remove controls handler from the driver
  media: sun6i-csi: Register the media device after creation
  media: sun6i-csi: Pass and store csi device directly in video code
  media: sun6i-csi: Tidy up video code
  media: sun6i-csi: Tidy up v4l2 code
  media: sun6i-csi: Tidy up Kconfig
  media: sun6i-csi: Use runtime pm for clocks and reset
  media: sun6i-csi: Define and use variant to get module clock rate
  media: sun6i-csi: Always set exclusive module clock rate
  media: sun6i-csi: Tidy up platform code
  media: sun6i-csi: Refactor main driver data structures
  media: sun6i-csi: Define and use driver name and (reworked) description
  media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  ...

io_uring/net: fail zc sendmsg when unsupported by socket

The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/net: fail zc send when unsupported by socket

If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

net: flag sockets supporting msghdr originated zerocopy

We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

hwmon: (corsair-psu) Add USB id of the new HX1500i psu

Also update the documentation accordingly.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

tools: include: sync include/api/linux/kvm.h

Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.

Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER

The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.

This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.

Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254ff937 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()

In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().

Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: Add support for arch compat vm ioctls

We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.

Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-riscv-fixes-6.1-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 6.1, take #1

- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc

Merge tag 'kvmarm-fixes-6.1-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #2

- Fix a bug preventing restoring an ITS containing mappings
  for very large and very sparse device topology

- Work around a relocation handling error when compiling
  the nVHE object with profile optimisation

Merge tag 'kvmarm-fixes-6.1-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #1

- Fix for stage-2 invalidation holding the VM MMU lock
  for too long by limiting the walk to the largest
  block mapping size

- Enable stack protection and branch profiling for VHE

- Two selftest fixes

Merge tag 'thermal-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fix from Rafael Wysocki:
 "This fixes the control CPU selection in the intel_powerclamp thermal
  driver"

* tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel_powerclamp: Use first online CPU as control_cpu

Merge tag 'pm-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix some issues and clean up code in ARM cpufreq drivers.

  Specifics:

   - Fix module loading in the Tegra124 cpufreq driver (Jon Hunter)

   - Fix memory leak and update to read-only region in the qcom cpufreq
     driver (Fabien Parent)

   - Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent,
     Yang Yingliang)"

* tag 'pm-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sun50i: Switch to use dev_err_probe() helper
  cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper
  cpufreq: imx6q: Switch to use dev_err_probe() helper
  cpufreq: dt: Switch to use dev_err_probe() helper
  cpufreq: qcom: remove unused parameter in function definition
  cpufreq: qcom: fix writes in read-only memory region
  cpufreq: qcom: fix memory leak in error path
  cpufreq: tegra194: Fix module loading

Merge tag 'acpi-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These fix issues introduced during this merge window (ACPI/PCI, device
  enumeration and documentation) and some other ones found recently.

  Specifics:

   - Add missing device reference counting to acpi_get_pci_dev() after
     changing it recently (Rafael Wysocki)

   - Fix resource list walk in acpi_dma_get_range() (Robin Murphy)

   - Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
     override warning message (Jiri Slaby)

   - Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)

   - Fix multiple error records handling in one of the ACPI extlog
     driver code paths (Tony Luck)

   - Prune DSDT override documentation from index after dropping it
     (Bagas Sanjaya)"

* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: scan: Fix DMA range assignment
  ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
  ACPI: resource: note more about IRQ override
  ACPI: resource: do IRQ override on LENOVO IdeaPad
  ACPI: extlog: Handle multiple records
  ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
  Documentation: ACPI: Prune DSDT override documentation from index

Merge tag 'efi-fixes-for-v6.1-1' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

 - fixes for the EFI variable store refactor that landed in v6.0

 - fixes for issues that were introduced during the merge window

 - back out some changes related to EFI zboot signing - we'll add a
   better solution for this during the next cycle

* tag 'efi-fixes-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
  efi: libstub: Fix incorrect payload size in zboot header
  efi: libstub: Give efi_main() asmlinkage qualification
  efi: efivars: Fix variable writes without query_variable_store()
  efi: ssdt: Don't free memory if ACPI table was loaded successfully
  efi: libstub: Remove zboot signing from build options

Merge tag 'iommu-fixes-v6.1-rc1' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:
 "Intel VT-d fixes:

   - Fix a lockdep splat issue in intel_iommu_init()

   - Allow NVS regions to pass RMRR check

   - Domain cleanup in error path"

* tag 'iommu-fixes-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Clean up si_domain in the init_dmars() error path
  iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
  iommu/vt-d: Use rcu_lock in get_resv_regions
  iommu: Add gfp parameter to iommu_alloc_resv_region

Merge tag 'for-linus-2022102101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

 - a 12 year old bug fix for the Apple Magic Trackpad v1 (José Expósito)

 - a fix for a potential crash on removal of the Playstation controllers
   (Roderick Colenbrander)

 - a few new device IDs and device-specific quirks, most notably support
   of the new Playstation DualSense Edge controller

* tag 'for-linus-2022102101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: lenovo: Make array tp10ubkbd_led static const
  HID: saitek: add madcatz variant of MMO7 mouse device ID
  HID: playstation: support updated DualSense rumble mode.
  HID: playstation: add initial DualSense Edge controller support
  HID: playstation: stop DualSense output work on remove.
  HID: magicmouse: Do not set BTN_MOUSE on double report

Merge tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:

 - memory leak fixes

 - fixes for directory leases, including an important one which fixes a
   problem noticed by git functional tests

 - fixes relating to missing free_xid calls (helpful for
   tracing/debugging of entry/exit into cifs.ko)

 - a multichannel fix

 - a small cleanup fix (use of list_move instead of list_del/list_add)

* tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: fix memory leaks in session setup
  cifs: drop the lease for cached directories on rmdir or rename
  smb3: interface count displayed incorrectly
  cifs: Fix memory leak when build ntlmssp negotiate blob failed
  cifs: set rc to -ENOENT if we can not get a dentry for the cached dir
  cifs: use LIST_HEAD() and list_move() to simplify code
  cifs: Fix xid leak in cifs_get_file_info_unix()
  cifs: Fix xid leak in cifs_ses_add_channel()
  cifs: Fix xid leak in cifs_flock()
  cifs: Fix xid leak in cifs_copy_file_range()
  cifs: Fix xid leak in cifs_create()

Merge tag 'nfsd-6.1-2' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:
 "Fixes for patches merged in v6.1"

* tag 'nfsd-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: ensure we always call fh_verify_error tracepoint
  NFSD: unregister shrinker when nfsd_init_net() fails

x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly

When an extended state component is not present in fpstate, but in init
state, the function copies from init_fpstate via copy_feature().

But, dynamic states are not present in init_fpstate because of all-zeros
init states. Then retrieving them from init_fpstate will explode like this:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 ...
 RIP: 0010:memcpy_erms+0x6/0x10
  ? __copy_xstate_to_uabi_buf+0x381/0x870
  fpu_copy_guest_fpstate_to_uabi+0x28/0x80
  kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm]
  ? __this_cpu_preempt_check+0x13/0x20
  ? vmx_vcpu_put+0x2e/0x260 [kvm_intel]
  kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
  ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
  ? __fget_light+0xd4/0x130
  __x64_sys_ioctl+0xe3/0x910
  ? debug_smp_processor_id+0x17/0x20
  ? fpregs_assert_state_consistent+0x27/0x50
  do_syscall_64+0x3f/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Adjust the 'mask' to zero out the userspace buffer for the features that
are not available both from fpstate and from init_fpstate.

The dynamic features depend on the compacted XSAVE format. Ensure it is
enabled before reading XCOMP_BV in init_fpstate.

Fixes: 2308ee57d93d ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Yuan Yao <yuan.yao@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/lkml/BYAPR11MB3717EDEF2351C958F2C86EED95259@BYAPR11MB3717.namprd11.prod.outlook.com/
Link: https://lkml.kernel.org/r/20221021185844.13472-1-chang.seok.bae@intel.com

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two small changes, one in the lpfc driver and the other in the core.

  The core change is an additional footgun guard which prevents users
  from writing the wrong state to sysfs and causing a hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix memory leak in lpfc_create_port()
  scsi: core: Restrict legal sdev_state transitions via sysfs

Merge tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin)
      - add a nvme-hwmong maintainer (Christoph Hellwig)
      - fix error pointer dereference in error handling (Dan Carpenter)
      - fix invalid memory reference in nvmet_subsys_attr_qid_max_show
        (Daniel Wagner)
      - don't limit the DMA segment size in nvme-apple (Russell King)
      - fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg)
      - disable write zeroes on various Kingston SSDs (Xander Li)

 - fix a memory leak with block device tracing (Ye)

 - flexible-array fix for ublk (Yushan)

 - document the ublk recovery feature from this merge window
   (ZiyangZhang)

 - remove dead bfq variable in struct (Yuwei)

 - error handling rq clearing fix (Yu)

 - add an IRQ safety check for the cached bio freeing (Pavel)

 - drbd bio cloning fix (Christoph)

* tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux:
  blktrace: remove unnessary stop block trace in 'blk_trace_shutdown'
  blktrace: fix possible memleak in '__blk_trace_remove'
  blktrace: introduce 'blk_trace_{start,stop}' helper
  bio: safeguard REQ_ALLOC_CACHE bio put
  block, bfq: remove unused variable for bfq_queue
  drbd: only clone bio if we have a backing device
  ublk_drv: use flexible-array member instead of zero-length array
  nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show
  nvmet: fix workqueue MEM_RECLAIM flushing dependency
  nvme-hwmon: kmalloc the NVME SMART log buffer
  nvme-hwmon: consistently ignore errors from nvme_hwmon_init
  nvme: add Guenther as nvme-hwmon maintainer
  nvme-apple: don't limit DMA segement size
  nvme-pci: disable write zeroes on various Kingston SSD
  nvme: fix error pointer dereference in error handling
  Documentation: document ublk user recovery feature
  blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()

Merge tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

 - Fix a potential memory leak in the error handling path of io-wq setup
   (Rafael)

 - Kill an errant debug statement that got added in this release (me)

 - Fix an oops with an invalid direct descriptor with IORING_OP_MSG_RING
   (Harshit)

 - Remove unneeded FFS_SCM flagging (Pavel)

 - Remove polling off the exit path (Pavel)

 - Move out direct descriptor debug check to the cleanup path (Pavel)

 - Use the proper helper rather than open-coding cached request get
   (Pavel)

* tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux:
  io-wq: Fix memory leak in worker creation
  io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd()
  io_uring/rw: remove leftover debug statement
  io_uring: don't iopoll from io_ring_ctx_wait_and_kill()
  io_uring: reuse io_alloc_req()
  io_uring: kill hot path fixed file bitmap debug checks
  io_uring: remove FFS_SCM

Merge tag 'for-linus-6.1-rc2-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "Just two fixes for the new 'virtio with grants' feature"

* tag 'for-linus-6.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/virtio: Convert PAGE_SIZE/PAGE_SHIFT/PFN_UP to Xen counterparts
  xen/virtio: Handle cases when page offset > PAGE_SIZE properly

Merge tag 'selinux-pr-20221020' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
 "A small SELinux fix for a GFP_KERNEL allocation while a spinlock is
  held.

  The patch, while still fairly small, is a bit larger than one might
  expect from a simple s/GFP_KERNEL/GFP_ATOMIC/ conversion because we
  added support for the function to be called with different gfp flags
  depending on the context, preserving GFP_KERNEL for those cases that
  can safely sleep"

* tag 'selinux-pr-20221020' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()

Merge tag 'mm-hotfixes-stable-2022-10-20' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morron:
 "Seventeen hotfixes, mainly for MM.

  Five are cc:stable and the remainder address post-6.0 issues"

* tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nouveau: fix migrate_to_ram() for faulting page
  mm/huge_memory: do not clobber swp_entry_t during THP split
  hugetlb: fix memory leak associated with vma_lock structure
  mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
  mm: /proc/pid/smaps_rollup: fix maple tree search
  mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
  mm/mmap: fix MAP_FIXED address return on VMA merge
  mm/mmap.c: __vma_adjust(): suppress uninitialized var warning
  mm/mmap: undo ->mmap() when mas_preallocate() fails
  init: Kconfig: fix spelling mistake "satify" -> "satisfy"
  ocfs2: clear dinode links count in case of error
  ocfs2: fix BUG when iput after ocfs2_mknod fails
  gcov: support GCC 12.1 and newer compilers
  zsmalloc: zs_destroy_pool: add size_class NULL check
  mm/mempolicy: fix mbind_range() arguments to vma_merge()
  mailmap: update email for Qais Yousef
  mailmap: update Dan Carpenter's email address