review.tizen.org Git - platform/kernel/linux-rpi.git/log

tracing: Fix endianness bug in histogram trigger

commit fe6e096a5bbf73a142f09c72e7aa2835026eb1a3 upstream.

At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.

Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have the histogram compare functions convert to u64 first

commit 106f41f5a302cb1f36c7543fae6a05de12e96fa4 upstream.

The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.

To fix this, first derference the value as a u64 then convert it to the type
being compared.

Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map")
Acked-by: Tom Zanussi <zanussi@kernel.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Avoid memory leak in process_system_preds()

commit 79e65c27f09683fbb50c33acab395d0ddf5302d2 upstream.

When failing in the allocation of filter_item, process_system_preds()
goes to fail_mem, where the allocated filter is freed.

However, this leads to memory leak of filter->filter_string and
filter->prog, which is allocated before and in process_preds().
This bug has been detected by kmemleak as well.

Fix this by changing kfree to __free_fiter.

unreferenced object 0xffff8880658007c0 (size 32):
  comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
  hex dump (first 32 bytes):
    63 6f 6d 6d 6f 6e 5f 70 69 64 20 20 3e 20 31 30  common_pid  > 10
    00 00 00 00 00 00 00 00 65 73 00 00 00 00 00 00  ........es......
  backtrace:
    [<0000000067441602>] kstrdup+0x2d/0x60
    [<00000000141cf7b7>] apply_subsystem_event_filter+0x378/0x932
    [<000000009ca32334>] subsystem_filter_write+0x5a/0x90
    [<0000000072da2bee>] vfs_write+0xe1/0x240
    [<000000004f14f473>] ksys_write+0xb4/0x150
    [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
    [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888060c22d00 (size 64):
  comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 e8 d7 41 80 88 ff ff  ...........A....
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000b8c1b109>] process_preds+0x243/0x1820
    [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932
    [<000000009ca32334>] subsystem_filter_write+0x5a/0x90
    [<0000000072da2bee>] vfs_write+0xe1/0x240
    [<000000004f14f473>] ksys_write+0xb4/0x150
    [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
    [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888041d7e800 (size 512):
  comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
  hex dump (first 32 bytes):
    70 bc 85 97 ff ff ff ff 0a 00 00 00 00 00 00 00  p...............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001e04af34>] process_preds+0x71a/0x1820
    [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932
    [<000000009ca32334>] subsystem_filter_write+0x5a/0x90
    [<0000000072da2bee>] vfs_write+0xe1/0x240
    [<000000004f14f473>] ksys_write+0xb4/0x150
    [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
    [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20191211091258.11310-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404a3add43c9c ("tracing: Only add filter list when needed")
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix lock inversion in trace_event_enable_tgid_record()

commit 3a53acf1d9bea11b57c1f6205e3fe73f9d8a3688 upstream.

       Task T2                             Task T3
trace_options_core_write()            subsystem_open()

mutex_lock(trace_types_lock)           mutex_lock(event_mutex)

set_tracer_flag()

   trace_event_enable_tgid_record()       mutex_lock(trace_types_lock)

    mutex_lock(event_mutex)

This gives a circular dependency deadlock between trace_types_lock and
event_mutex. To fix this invert the usage of trace_types_lock and
event_mutex in trace_options_core_write(). This keeps the sequence of
lock usage consistent.

Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com
Cc: stable@vger.kernel.org
Fixes: d914ba37d7145 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30

commit 8df34c56321479bfa1ec732c675b686c2b4df412 upstream.

glibc 2.30 introduces gettid() in public headers, which clashes with
the internal static definition within rseq selftests.

Rename gettid() to rseq_gettid() to eliminate this symbol name clash.

Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: ftrace: correct the condition logic in function graph tracer

commit 1d8f65798240b6577d8c44d20c8ea8f1d429e495 upstream.

The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.

Fixes: e949b6db51dc (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: fix up emulated open drain outputs

commit 256efaea1fdc4e38970489197409a26125ee0aaa upstream.

gpiolib has a corner case with open drain outputs that are emulated.
When such outputs are outputting a logic 1, emulation will set the
hardware to input mode, which will cause gpiod_get_direction() to
report that it is in input mode. This is different from the behaviour
with a true open-drain output.

Unify the semantics here.

Cc: <stable@vger.kernel.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Fix retrieving of active qcs

commit 8385d756e114f2df8568e508902d5f9850817ffb upstream.

ata_qc_complete_multiple() is called with a mask of the still active
tags.

mv_sata doesn't have this information directly and instead calculates
the still active tags from the started tags (ap->qc_active) and the
finished tags as (ap->qc_active ^ done_mask)

Since 28361c40368 the hw_tag and tag are no longer the same and the
equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
started and this will be in done_mask on completion. ap->qc_active ^
done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
the internal tag will never be reported as completed.

This is fixed by introducing ata_qc_get_active() which returns the
active hardware tags and calling it where appropriate.

This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
problem. There is another case in sata_nv that most likely needs fixing
as well, but this looks a little different, so I wasn't confident enough
to change that.

Fixes: 28361c403683 ("libata: add extra internal command")
Cc: stable@vger.kernel.org
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing export of ata_qc_get_active(), as per Pali.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE

commit 1a3d78cb6e20779a19388315bd8efefbd8d4a656 upstream.

Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making
it conforming to the 'strict' AHCI implementation which this controller
is based on.

This solves long link establishment with specific hard drives (e.g.:
Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the
error recovery handling before finally establishing a succesful SATA
link at the desired speed.

We re-order the hpriv->flags assignment to also remove the NONCQ quirk
since we can set the flag directly.

Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms")
Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Add missing clock management during recovery

commit bf0e5013bc2dcac205417e1252205dca39dfc005 upstream.

The downstream implementation of ahci_brcm.c did contain clock
management recovery, but until recently, did that outside of the
libahci_platform helpers and this was unintentionally stripped out while
forward porting the patch upstream.

Add the missing clock management during recovery and sleep for 10
milliseconds per the design team recommendations to ensure the SATA PHY
controller and AFE have been fully quiesced.

Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Allow optional reset controller to be used

commit 2b2c47d9e1fe90311b725125d6252a859ee87a79 upstream.

On BCM63138, we need to reset the AHCI core prior to start utilizing it,
grab the reset controller device cookie and do that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Fix AHCI resources management

commit c0cdf2ac4b5bf3e5ef2451ea29fb4104278cdabc upstream.

The AHCI resources management within ahci_brcm.c is a little
convoluted, largely because it historically had a dedicated clock that
was managed within this file in the downstream tree. Once brough
upstream though, the clock was left to be managed by libahci_platform.c
which is entirely appropriate.

This patch series ensures that the AHCI resources are fetched and
enabled before any register access is done, thus avoiding bus errors on
platforms which clock gate the controller by default.

As a result we need to re-arrange the suspend() and resume() functions
in order to avoid accessing registers after the clocks have been turned
off respectively before the clocks have been turned on. Finally, we can
refactor brcm_ahci_get_portmask() in order to fetch the number of ports
from hpriv->mmio which is now accessible without jumping through hoops
like we used to do.

The commit pointed in the Fixes tag is both old and new enough not to
require major headaches for backporting of this patch.

Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()

commit 84b032dbfdf1c139cd2b864e43959510646975f8 upstream.

This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5
("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are
going to need ahci_platform_{enable,disable}_phys() in a subsequent
commit for ahci_brcm.c in order to properly control the PHY
initialization order.

Also make sure the function prototypes are declared in
include/linux/ahci_platform.h as a result.

Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE

commit 673bdf8ce0a387ef585c13b69a2676096c6edfe9 upstream.

These were added to blkdev_ioctl() but not blkdev_compat_ioctl,
so add them now.

Cc: <stable@vger.kernel.org> # v4.10+
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: block: handle Persistent Reservations

commit b2c0fcd28772f99236d261509bcd242135677965 upstream.

These were added to blkdev_ioctl() in linux-5.5 but not
blkdev_compat_ioctl, so add them now.

Cc: <stable@vger.kernel.org> # v4.4+
Fixes: bbd3e064362e ("block: add an API for Persistent Reservations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fold in followup patch from Arnd with missing pr.h header include.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

dmaengine: Fix access to uninitialized dma_slave_caps

commit 53a256a9b925b47c7e67fc1f16ca41561a7b877c upstream.

dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the
stack, populates it using dma_get_slave_caps() and then accesses one
of its members.

However dma_get_slave_caps() may fail and this isn't accounted for,
leading to a legitimate warning of gcc-4.9 (but not newer versions):

   In file included from drivers/spi/spi-bcm2835.c:19:0:
   drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse':
>> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized]
     if (caps.descriptor_reuse) {

Fix it, thereby also silencing the gcc-4.9 warning.

The issue has been present for 4 years but surfaces only now that
the first caller of dmaengine_desc_set_reuse() has been added in
spi-bcm2835.c. Another user of reusable DMA descriptors has existed
for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag
directly instead of calling dmaengine_desc_set_reuse(). Nevertheless,
tag this commit for stable in case there are out-of-tree users.

Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.3+
Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locks: print unsigned ino in /proc/locks

commit 98ca480a8f22fdbd768e3dad07024c8d4856576c upstream.

An ino is unsigned, so display it as such in /proc/locks.

Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram: Write new dumps to start of recycled zones

commit 9e5f1c19800b808a37fb9815a26d382132c26c3d upstream.

The ram_core.c routines treat przs as circular buffers. When writing a
new crash dump, the old buffer needs to be cleared so that the new dump
doesn't end up in the wrong place (i.e. at the end).

The solution to this problem is to reset the circular buffer state before
writing a new Oops dump.

Signed-off-by: Aleksandr Yashkin <a.yashkin@inango-systems.com>
Signed-off-by: Nikolay Merinov <n.merinov@inango-systems.com>
Signed-off-by: Ariel Gilman <a.gilman@inango-systems.com>
Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com
Fixes: 896fc1f0c4c6 ("pstore/ram: Switch to persistent_ram routines")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: move_pages: return valid node id in status if the page is already on the target node

commit e0153fc2c7606f101392b682e720a7a456d6c766 upstream.

Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:

  int main(void)
  {
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;

unsigned long nodemask =  1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);

void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}

ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);

int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}

ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
  }

Then running the program would return nonsense status values:

  $ ./move_pages_bug
  move_pages: 0
  status[0] = 208
  status[1] = 208
  status[2] = 208
  status[3] = 208
  status[4] = 208
  status[5] = 208
  status[6] = 208
  status[7] = 208

This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds.  The valid status may be errno or node id.

We can't simply initialize status array to zero since the pages may be
not on node 0.  Fix it by updating status with node id which the page is
already on.

Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: account security cred as well to kmemcg

commit 84029fd04c201a4c7e0b07ba262664900f47c6f5 upstream.

The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not.  Account cred->security to kmemcg.

Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes.  Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period.  This
overhead can adversely impact the isolation on the system.

One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.

Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: fix the migrated zspage statistics.

commit ac8f05da5174c560de122c499ce5dfb5d0dfbee5 upstream.

When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.

Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes: 91537fee0013 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: check 'transmit_in_progress', not 'transmitting'

commit ac479b51f3f4aaa852b5d3f00ecfb9290230cf64 upstream.

Currently wait_event_interruptible_timeout is called in cec_thread_func()
when adap->transmitting is set. But if the adapter is unconfigured
while transmitting, then adap->transmitting is set to NULL. But the
hardware is still actually transmitting the message, and that's
indicated by adap->transmit_in_progress and we should wait until that
is finished or times out before transmitting new messages.

As the original commit says: adap->transmitting is the userspace view,
adap->transmit_in_progress reflects the hardware state.

However, if adap->transmitting is NULL and adap->transmit_in_progress
is true, then wait_event_interruptible is called (no timeout), which
can get stuck indefinitely if the CEC driver is flaky and never marks
the transmit-in-progress as 'done'.

So test against transmit_in_progress when deciding whether to use
the timeout variant or not, instead of testing against adap->transmitting.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 32804fcb612b ("media: cec: keep track of outstanding transmits")
Cc: <stable@vger.kernel.org> # for v4.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: avoid decrementing transmit_queue_sz if it is 0

commit 95c29d46ab2a517e4c26d0a07300edca6768db17 upstream.

WARN if transmit_queue_sz is 0 but do not decrement it.
The CEC adapter will become unresponsive if it goes below
0 since then it thinks there are 4 billion messages in the
queue.

Obviously this should not happen, but a driver bug could
cause this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.12 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cec: CEC 2.0-only bcast messages were ignored

commit cec935ce69fc386f13959578deb40963ebbb85c3 upstream.

Some messages are allowed to be a broadcast message in CEC 2.0
only, and should be ignored by CEC 1.4 devices.

Unfortunately, the check was wrong, causing such messages to be
marked as invalid under CEC 2.0.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pulse8-cec: fix lost cec_transmit_attempt_done() call

commit e5a52a1d15c79bb48a430fb263852263ec1d3f11 upstream.

The periodic PING command could interfere with the result of
a CEC transmit, causing a lost cec_transmit_attempt_done()
call.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Avoid VDSO ABI breakage due to global register variable

commit bbcc5672b0063b0e9d65dc8787a4f09c3b5bb5cc upstream.

Declaring __current_thread_info as a global register variable has the
effect of preventing GCC from saving & restoring its value in cases
where the ABI would typically do so.

To quote GCC documentation:

> If the register is a call-saved register, call ABI is affected: the
> register will not be restored in function epilogue sequences after the
> variable has been assigned. Therefore, functions cannot safely return
> to callers that assume standard ABI.

When our position independent VDSO is built for the n32 or n64 ABIs all
functions it exposes should be preserving the value of $gp/$28 for their
caller, but in the presence of the __current_thread_info global register
variable GCC stops doing so & simply clobbers $gp/$28 when calculating
the address of the GOT.

In cases where the VDSO returns success this problem will typically be
masked by the caller in libc returning & restoring $gp/$28 itself, but
that is by no means guaranteed. In cases where the VDSO returns an error
libc will typically contain a fallback path which will now fail
(typically with a bad memory access) if it attempts anything which
relies upon the value of $gp/$28 - eg. accessing anything via the GOT.

One fix for this would be to move the declaration of
__current_thread_info inside the current_thread_info() function,
demoting it from global register variable to local register variable &
avoiding inadvertently creating a non-standard calling ABI for the VDSO.
Unfortunately this causes issues for clang, which doesn't support local
register variables as pointed out by commit fe92da0f355e ("MIPS: Changed
current_thread_info() to an equivalent supported by both clang and GCC")
which introduced the global register variable before we had a VDSO to
worry about.

Instead, fix this by continuing to use the global register variable for
the kernel proper but declare __current_thread_info as a simple extern
variable when building the VDSO. It should never be referenced, and will
cause a link error if it is. This resolves the calling convention issue
for the VDSO without having any impact upon the build of the kernel
itself for either clang or gcc.

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: hdmi: Remove duplicate cleanup calls

commit 57177d214ee0816c4436c23d6c933ccb32c571f1 upstream.

When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup()
are called. This also happens when the connector and the encoder are
destroyed. This double call triggers a NULL pointer exception.

The patch fixes this by removing the cleanup calls in the unbind
function.

Cc: <stable@vger.kernel.org>
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add headset Mic no shutup for ALC283

commit 66c5d718e5a6f80153b5e8d6ad8ba8e9c3320839 upstream.

Chrome machine had humming noise from external speaker plugin at
codec D3 state.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/2692449396954c6c968f5b75e2660358@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: set the interface format after resume on Dell WD19

commit 92adc96f8eecd9522a907c197cc3d62e405539fe upstream.

Recently we found the headset-mic on the Dell Dock WD19 doesn't work
anymore after s3 (s2i or deep), this problem could be workarounded by
closing (pcm_close) the app and then reopening (pcm_open) the app, so
this bug is not easy to be detected by users.

When problem happens, retire_capture_urb() could still be called
periodically, but the size of captured data is always 0, it could be
a firmware bug on the dock. Anyway I found after resuming, the
snd_usb_pcm_prepare() will be called, and if we forcibly run
set_format() to set the interface and its endpoint, the capture
size will be normal again. This problem and workaound also apply to
playback.

To fix it in the kernel, add a quirk to let set_format() run
forcibly once after resume.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: fix set_format altsetting sanity check

commit 0141254b0a74b37aa7eb13d42a56adba84d51c73 upstream.

Make sure to check the return value of usb_altnum_to_altsetting() to
avoid dereferencing a NULL pointer when the requested alternate settings
is missing.

The format altsetting number may come from a quirk table and there does
not seem to be any other validation of it (the corresponding index is
checked however).

Fixes: b099b9693d23 ("ALSA: usb-audio: Avoid superfluous usb_set_interface() calls")
Cc: stable <stable@vger.kernel.org> # 4.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191220093134.1248-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code

commit 0aec96f5897ac16ad9945f531b4bef9a2edd2ebd upstream.

Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724
driver with Infrasonic Quartet support code: namely, ice->set_rate
callback gets called inside ice->reg_lock spinlock, while the callback
in quartet.c holds ice->gpio_mutex.

This patch fixes the invalid call: it simply moves the calls of
ice->set_rate and ice->set_mclk callbacks outside the spinlock.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com
Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_tproxy: Fix port selector on Big Endian

[ Upstream commit 8cb4ec44de42b99b92399b4d1daf3dc430ed0186 ]

On Big Endian architectures, u16 port value was extracted from the wrong
parts of u32 sreg_port, just like commit 10596608c4d62 ("netfilter:
nf_tables: fix mismatch in big-endian system") describes.

Fixes: 4ed8eb6570a49 ("netfilter: nf_tables: Add native tproxy support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: limit to INT_MAX in create_blob ioctl

[ Upstream commit 5bf8bec3f4ce044a223c40cbce92590d938f0e9c ]

The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb
("uaccess: disallow > INT_MAX copy sizes")

Code itself should have been fine as-is.

Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com
Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes")
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

taskstats: fix data-race

[ Upstream commit 0b8d616fb5a8ffa307b1d3af37f55c15dae14f28 ]

When assiging and testing taskstats in taskstats_exit() there's a race
when setting up and reading sig->stats when a thread-group with more
than one thread exits:

write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0:
taskstats_tgid_alloc kernel/taskstats.c:567 [inline]
taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596
do_exit+0x2c2/0x18e0 kernel/exit.c:864
do_group_exit+0xb4/0x1c0 kernel/exit.c:983
get_signal+0x2a2/0x1320 kernel/signal.c:2734
do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815
exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299
entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1:
taskstats_tgid_alloc kernel/taskstats.c:559 [inline]
taskstats_exit+0xb2/0x717 kernel/taskstats.c:596
do_exit+0x2c2/0x18e0 kernel/exit.c:864
do_group_exit+0xb4/0x1c0 kernel/exit.c:983
__do_sys_exit_group kernel/exit.c:994 [inline]
__se_sys_exit_group kernel/exit.c:992 [inline]
__x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992
do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by using smp_load_acquire() and smp_store_release().

Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com
Fixes: 34ec12349c8a ("taskstats: cleanup ->signal->stats allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Will Deacon <will@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix mount failure crash on invalid iclog memory access

[ Upstream commit 798a9cada4694ca8d970259f216cec47e675bfd5 ]

syzbot (via KASAN) reports a use-after-free in the error path of
xlog_alloc_log(). Specifically, the iclog freeing loop doesn't
handle the case of a fully initialized ->l_iclog linked list.
Instead, it assumes that the list is partially constructed and NULL
terminated.

This bug manifested because there was no possible error scenario
after iclog list setup when the original code was added. Subsequent
code and associated error conditions were added some time later,
while the original error handling code was never updated. Fix up the
error loop to terminate either on a NULL iclog or reaching the end
of the list.

Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen

[ Upstream commit d2cd795c4ece1a24fda170c35eeb4f17d9826cbb ]

The auto-parser assigns the bass speaker to DAC3 (NID 0x06) which
is without the volume control. I do not see a reason to use DAC2,
because the shared output to all speakers produces the sufficient
and well balanced sound. The stereo support is enough for this
purpose (laptop).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191129144027.14765-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC

[ Upstream commit 48e01504cf5315cbe6de9b7412e792bfcc3dd9e1 ]

ASUS reported that there's an bass speaker in addition to internal
speaker and it uses DAC 0x02. It was not enabled in the commit
436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS
UX431FLC") which only enables the amplifier and the front speaker.
This commit enables the bass speaker on top of the aforementioned
work to improve the acoustic experience.

Fixes: 436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker

[ Upstream commit e79c22695abd3b75a6aecf4ea4b9607e8d82c49c ]

Dell has new platform which has dual speaker connecting.
They want dual speaker which use same dac for output.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/229c7efa2b474a16b7d8a916cd096b68@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / hibernate: memory_bm_find_bit(): Tighten node optimisation

[ Upstream commit da6043fe85eb5ec621e34a92540735dcebbea134 ]

When looking for a bit by number we make use of the cached result from the
preceding lookup to speed up operation.  Firstly we check if the requested
pfn is within the cached zone and if not lookup the new zone.  We then
check if the offset for that pfn falls within the existing cached node.
This happens regardless of whether the node is within the zone we are
now scanning.  With certain memory layouts it is possible for this to
false trigger creating a temporary alias for the pfn to a different bit.
This leads the hibernation code to free memory which it was never allocated
with the expected fallout.

Ensure the zone we are scanning matches the cached zone before considering
the cached node.

Deep thanks go to Andrea for many, many, many hours of hacking and testing
that went into cornering this bug.

Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/balloon: fix ballooned page accounting without hotplug enabled

[ Upstream commit c673ec61ade89bf2f417960f986bc25671762efb ]

When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined
reserve_additional_memory() will set balloon_stats.target_pages to a
wrong value in case there are still some ballooned pages allocated via
alloc_xenballooned_pages().

This will result in balloon_process() no longer be triggered when
ballooned pages are freed in batches.

Reported-by: Nicholas Tsirakis <niko.tsirakis@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-blkback: prevent premature module unload

[ Upstream commit fa2ac657f9783f0891b2935490afe9a7fd29d3fa ]

Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem
cache. This cache is destoyed when xen-blkif is unloaded so it is
necessary to wait for the deferred free routine used for such objects to
complete. This necessity was missed in commit 14855954f636 "xen-blkback:
allow module to be cleanly unloaded". This patch fixes the problem by
taking/releasing extra module references in xen_blkif_alloc/free()
respectively.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix steering rule of drop and count

[ Upstream commit ed9085fed9d95d5921582e3c8474f3736c5d2782 ]

There are two flow rule destinations: QP and packet. While users are
setting DROP packet rule, the QP should not be set as a destination.

Fixes: 3b3233fbf02e ("IB/mlx5: Add flow counters binding support")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Follow mirror sequence of device add during device removal

[ Upstream commit 89f988d93c62384758b19323c886db917a80c371 ]

Current code device add sequence is:

ib_register_device()
ib_mad_init()
init_sriov_init()
register_netdev_notifier()

Therefore, the remove sequence should be,

unregister_netdev_notifier()
close_sriov()
mad_cleanup()
ib_unregister_device()

However it is not above.
Hence, make do above remove sequence.

Fixes: fa417f7b520ee ("IB/mlx4: Add support for IBoE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Avoid SBD overflow condition in irq handler

[ Upstream commit 0539ad0b22877225095d8adef0c376f52cc23834 ]

The s390 CPU Measurement sampling facility has an overflow condition
which fires when all entries in a SBD are used.
The measurement alert interrupt is triggered and reads out all samples
in this SDB. It then tests the successor SDB, if this SBD is not full,
the interrupt handler does not read any samples at all from this SDB
The design waits for the hardware to fill this SBD and then trigger
another meassurement alert interrupt.

This scheme works nicely until
an perf_event_overflow() function call discards the sample due to
a too high sampling rate.
The interrupt handler has logic to read out a partially filled SDB
when the perf event overflow condition in linux common code is met.
This causes the CPUM sampling measurement hardware and the PMU
device driver to operate on the same SBD's trailer entry.
This should not happen.

This can be seen here using this trace:
   cpumsf_pmu_add: tear:0xb5286000
   hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0
   hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
        above shows 1. interrupt
   hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0
   hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
        above shows 2. interrupt
... this goes on fine until...
   hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0
   perf_push_sample1: overflow
      one or more samples read from the IRQ handler are rejected by
      perf_event_overflow() and the IRQ handler advances to the next SDB
      and modifies the trailer entry of a partially filled SDB.
   hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1
      timestamp: 14:32:52.519953

Next time the IRQ handler is called for this SDB the trailer entry shows
an overflow count of 19 missed entries.
   hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1
      timestamp: 14:32:52.970058

Remove access to a follow on SDB when event overflow happened.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits

[ Upstream commit 39d4a501a9ef55c57b51e3ef07fc2aeed7f30b3b ]

Function perf_event_ever_overflow() and perf_event_account_interrupt()
are called every time samples are processed by the interrupt handler.
However function perf_event_account_interrupt() has checks to avoid being
flooded with interrupts (more then 1000 samples are received per
task_tick).  Samples are then dropped and a PERF_RECORD_THROTTLED is
added to the perf data. The perf subsystem limit calculation is:

    maximum sample frequency := 100000 --> 1 samples per 10 us
    task_tick = 10ms = 10000us --> 1000 samples per task_tick

The work flow is

measurement_alert() uses SDBT head and each SBDT points to 511
SDB pages, each with 126 sample entries. After processing 8 SBDs
and for each valid sample calling:

     perf_event_overflow()
       perf_event_account_interrupts()

there is a considerable amount of samples being dropped, especially when
the sample frequency is very high and near the 100000 limit.

To avoid the high amount of samples being dropped near the end of a
task_tick time frame, increment the sampling interval in case of
dropped events. The CPU Measurement sampling facility on the s390
supports only intervals, specifiing how many CPU cycles have to be
executed before a sample is generated. Increase the interval when the
samples being generated hit the task_tick limit.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: raid1: check rdev before reference in raid1_sync_request func

[ Upstream commit 028288df635f5a9addd48ac4677b720192747944 ]

In raid1_sync_request func, rdev should be checked before reference.

Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP

[ Upstream commit 1da4bd9f9d187f53618890d7b66b9628bbec3c70 ]

Fix the lookup method on the dynamic root directory such that creation
calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP
rather than failing with some odd error (such as EEXIST).

lookup() itself tries to create automount directories when it is invoked.
These are cached locally in RAM and not committed to storage.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: make socket read/write_iter() honor IOCB_NOWAIT

[ Upstream commit ebfcd8955c0b52eb793bcbc9e71140e3d0cdb228 ]

The socket read/write helpers only look at the file O_NONBLOCK. not
the iocb IOCB_NOWAIT flag. This breaks users like preadv2/pwritev2
and io_uring that rely on not having the file itself marked nonblocking,
but rather the iocb itself.

Cc: netdev@vger.kernel.org
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: fix wrong endpoint desc

[ Upstream commit e5b5da96da50ef30abb39cb9f694e99366404d24 ]

Gadget driver should always use config_ep_by_speed() to initialize
usb_ep struct according to usb device's operating speed. Otherwise,
usb_ep struct may be wrong if usb devcie's operating speed is changed.

The key point in this patch is that we want to make sure the desc pointer
in usb_ep struct will be set to NULL when gadget is disconnected.
This will force it to call config_ep_by_speed() to correctly initialize
usb_ep struct based on the new operating speed when gadget is
re-connected later.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit

[ Upstream commit 37a68eab4cd92b507c9e8afd760fdc18e4fecac6 ]

Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.

This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: stop discovering if oob mode is disconnected

[ Upstream commit f70267f379b5e5e11bdc5d72a56bf17e5feed01f ]

The discovering of sas port is driven by workqueue in libsas. When libsas
is processing port events or phy events in workqueue, new events may rise
up and change the state of some structures such as asd_sas_phy.  This may
cause some problems such as follows:

==>thread 1                       ==>thread 2

                                  ==>phy up
                                  ==>phy_up_v3_hw()
                                    ==>oob_mode = SATA_OOB_MODE;
                                  ==>phy down quickly
                                  ==>hisi_sas_phy_down()
                                    ==>sas_ha->notify_phy_event()
                                    ==>sas_phy_disconnected()
                                      ==>oob_mode = OOB_NOT_CONNECTED
==>workqueue wakeup
==>sas_form_port()
  ==>sas_discover_domain()
    ==>sas_get_port_device()
      ==>oob_mode is OOB_NOT_CONNECTED and device
         is wrongly taken as expander

This at last lead to the panic when libsas trying to issue a command to
discover the device.

[183047.614035] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000058
[183047.622896] Mem abort info:
[183047.625762]   ESR = 0x96000004
[183047.628893]   Exception class = DABT (current EL), IL = 32 bits
[183047.634888]   SET = 0, FnV = 0
[183047.638015]   EA = 0, S1PTW = 0
[183047.641232] Data abort info:
[183047.644189]   ISV = 0, ISS = 0x00000004
[183047.648100]   CM = 0, WnR = 0
[183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000b7df67be
[183047.657834] [0000000000000058] pgd=0000000000000000
[183047.662789] Internal error: Oops: 96000004 [#1] SMP
[183047.667740] Process kworker/u16:2 (pid: 31291, stack limit =
0x00000000417c4974)
[183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G
W  OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1
[183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10,
BIOS 0.15 10/22/2019
[183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO)
[183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw]
[183047.717153] sp : ffff00000f28ba60
[183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228
[183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200
[183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0
[183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228
[183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200
[183047.747464] x19: 0000000000f80800 x18: 0000000000000010
[183047.752848] x17: 0000000000000000 x16: 0000000000000000
[183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005
[183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20
[183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870
[183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0
[183047.779770] x7 : 0000000000000000 x6 : 000000000000003f
[183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0
[183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007
[183047.795922] x1 : 0000000000000008 x0 : 0000000000000000
[183047.801307] Call trace:
[183047.803827]  prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.809127]  hisi_sas_task_prep+0x750/0x888 [hisi_sas_main]
[183047.814773]  hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main]
[183047.820939]  hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
[183047.826757]  smp_execute_task_sg+0xec/0x218
[183047.831013]  smp_execute_task+0x74/0xa0
[183047.834921]  sas_discover_expander.part.7+0x9c/0x5f8
[183047.839959]  sas_discover_root_expander+0x90/0x160
[183047.844822]  sas_discover_domain+0x1b8/0x1e8
[183047.849164]  process_one_work+0x1b4/0x3f8
[183047.853246]  worker_thread+0x54/0x470
[183047.856981]  kthread+0x134/0x138
[183047.860283]  ret_from_fork+0x10/0x18
[183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800)
[183047.870097] kernel fault(0x1) notification starting on CPU 0
[183047.875828] kernel fault(0x1) notification finished on CPU 0
[183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE)
hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE)
[183047.892418] ---[ end trace 4cc26083fc11b783  ]---
[183047.897107] Kernel panic - not syncing: Fatal exception
[183047.902403] kernel fault(0x5) notification starting on CPU 0
[183047.908134] kernel fault(0x5) notification finished on CPU 0
[183047.913865] SMP: stopping secondary CPUs
[183047.917861] Kernel Offset: disabled
[183047.921422] CPU features: 0x2,a2a00a38
[183047.925243] Memory Limit: none
[183047.928372] kernel reboot(0x2) notification starting on CPU 0
[183047.934190] kernel reboot(0x2) notification finished on CPU 0
[183047.940008] ---[ end Kernel panic - not syncing: Fatal exception
]---

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.com
Reported-by: Gao Chuan <gaochuan4@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: qla4xxx: fix double free in probe

[ Upstream commit fee92f25777789d73e1936b91472e9c4644457c8 ]

On this error path we call qla4xxx_mem_free() and then the caller also
calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a
couple double frees:

drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed

Fixes: afaf5a2d341d ("[SCSI] Initial Commit of qla4xxx")
Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI

[ Upstream commit af22f0c7b052c5c203207f1e5ebd6aa65f87c538 ]

PORT UPDATE asynchronous event is generated on the host that issues PLOGI
ELS (in the case of higher WWPN). In that case, the event shouldn't be
handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that
trigger link flap.

Ignore the event if the host has higher WWPN, but handle otherwise.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-13-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Send Notify ACK after N2N PLOGI

[ Upstream commit 5e6b01d84b9d20bcd77fc7c4733a2a4149bf220a ]

qlt_handle_login schedules session for deletion even if a login is in
progress. That causes login bouncing, i.e. a few logins are made before it
settles down.

Complete the first login by sending Notify Acknowledge IOCB via
qlt_plogi_ack_unref if the session is pending login completion.

Fixes: 9cd883f07a54 ("scsi: qla2xxx: Fix session cleanup for N2N")
Cc: Krishna Kant <krishna.kant@purestorage.com>
Cc: Alexei Potashnik <alexei@purestorage.com>
Link: https://lore.kernel.org/r/20191125165702.1013-11-r.bolshakov@yadro.com
Acked-by: Quinn Tran <qutran@marvell.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Configure local loop for N2N target

[ Upstream commit fd1de5830a5abaf444cc4312871e02c41e24fdc1 ]

qla2x00_configure_local_loop initializes PLOGI payload for PLOGI ELS using
Get Parameters mailbox command.

In the case when the driver is running in target mode, the topology is N2N
and the target port has higher WWPN, LOCAL_LOOP_UPDATE bit is cleared too
early and PLOGI payload is not initialized by the Get Parameters
command. That causes a failure of ELS IOCB carrying the PLOGI with 0x15 aka
Data Underrun error.

LOCAL_LOOP_UPDATE has to be set to initialize PLOGI payload.

Fixes: 48acad099074 ("scsi: qla2xxx: Fix N2N link re-connect")
Link: https://lore.kernel.org/r/20191125165702.1013-10-r.bolshakov@yadro.com
Acked-by: Quinn Tran <qutran@marvell.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length

[ Upstream commit 0334cdea1fba36fad8bdf9516f267ce01de625f7 ]

The size of the buffer is hardcoded as 0x70 or 112 bytes, while the size of
ELS IOCB is 0x40 and the size of PLOGI payload returned by Get Parameters
command is 0x74.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-9-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Don't call qlt_async_event twice

[ Upstream commit 2c2f4bed9b6299e6430a65a29b5d27b8763fdf25 ]

MBA_PORT_UPDATE generates duplicate log lines in target mode because
qlt_async_event is called twice. Drop the calls within the case as the
function will be called right after the switch statement.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Drop superfluous INIT_WORK of del_work

[ Upstream commit 600954e6f2df695434887dfc6a99a098859990cf ]

del_work is already initialized inside qla2x00_alloc_fcport, there's no
need to overwrite it. Indeed, it might prevent complete traversal of
workqueue list.

Fixes: a01c77d2cbc45 ("scsi: qla2xxx: Move session delete to driver work queue")
Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-5-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func

[ Upstream commit 9a1b0b9a6dab452fb0e39fe96880c4faf3878369 ]

When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf,
dd_data should be freed before return SLI_CONFIG_HANDLED.

When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in
job_error tag.

Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.com
Signed-off-by: Bo Wu <wubo40@huawei.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxe: correctly calculate iCRC for unaligned payloads

[ Upstream commit 2030abddec6884aaf5892f5724c48fc340e6826f ]

If RoCE PDUs being sent or received contain pad bytes, then the iCRC
is miscalculated, resulting in PDUs being emitted by RXE with an incorrect
iCRC, as well as ingress PDUs being dropped due to erroneously detecting
a bad iCRC in the PDU. The fix is to include the pad bytes, if any,
in iCRC computations.

Note: This bug has caused broken on-the-wire compatibility with actual
hardware RoCE devices since the soft-RoCE driver was first put into the
mainstream kernel. Fixing it will create an incompatibility with the
original soft-RoCE devices, but is necessary to be compatible with real
hardware devices.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Steve Wise <larrystevenwise@gmail.com>
Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: add missed unregister_pernet_subsys in init failure

[ Upstream commit 44a7b6759000ac51b92715579a7bba9e3f9245c2 ]

The driver forgets to call unregister_pernet_subsys() in the error path
of cma_init().
Add the missed call to fix it.

Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix SELinux setting security label on /afs

[ Upstream commit bcbccaf2edcf1b76f73f890e968babef446151a4 ]

Make the AFS dynamic root superblock R/W so that SELinux can set the
security label on it. Without this, upgrades to, say, the Fedora
filesystem-afs RPM fail if afs is mounted on it because the SELinux label
can't be (re-)applied.

It might be better to make it possible to bypass the R/O check for LSM
label application through setxattr.

Fixes: 4d673da14533 ("afs: Support the AFS dynamic root")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: selinux@vger.kernel.org
cc: linux-security-module@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix afs_find_server lookups for ipv4 peers

[ Upstream commit 9bd0160d12370a076e44f8d1320cde9c83f2c647 ]

afs_find_server tries to find a server that has an address that
matches the transport address of an rxrpc peer.  The code assumes
that the transport address is always ipv6, with ipv4 represented
as ipv4 mapped addresses, but that's not the case.  If the transport
family is AF_INET, srx->transport.sin6.sin6_addr.s6_addr32[] will
be beyond the actual ipv4 address and will always be 0, and all
ipv4 addresses will be seen as matching.

As a result, the first ipv4 address seen on any server will be
considered a match, and the server returned may be the wrong one.

One of the consequences is that callbacks received over ipv4 will
only be correctly applied for the server that happens to have the
first ipv4 address on the fs_addresses4 list.  Callbacks over ipv4
from all other servers are dropped, causing the client to serve stale
data.

This is fixed by looking at the transport family, and comparing ipv4
addresses based on a sockaddr_in structure rather than a sockaddr_in6.

Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Don't fail devfreq_dev_release if not in list

[ Upstream commit 42a6b25e67df6ee6675e8d1eaf18065bd73328ba ]

Right now devfreq_dev_release will print a warning and abort the rest of
the cleanup if the devfreq instance is not part of the global
devfreq_list. But this is a valid scenario, for example it can happen if
the governor can't be found or on any other init error that happens
after device_register.

Initialize devfreq->node to an empty list head in devfreq_add_device so
that list_del becomes a safe noop inside devfreq_dev_release and we can
continue the rest of the cleanup.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Set scaling_max_freq to max on OPP notifier error

[ Upstream commit e7cc792d00049c874010b398a27c3cc7bc8fef34 ]

The devfreq_notifier_call functions will update scaling_min_freq and
scaling_max_freq when the OPP table is updated.

If fetching the maximum frequency fails then scaling_max_freq remains
set to zero which is confusing. Set to ULONG_MAX instead so we don't
need special handling for this case in other places.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Fix devfreq_notifier_call returning errno

[ Upstream commit e876e710ede23f670494331e062d643928e4142a ]

Notifier callbacks shouldn't return negative errno but one of the
NOTIFY_OK/DONE/BAD values.

The OPP core will ignore return values from notifiers but returning a
value that matches NOTIFY_STOP_MASK will stop the notification chain.

Fix by always returning NOTIFY_OK.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: max9611: Fix too short conversion time delay

[ Upstream commit 9fd229c478fbf77c41c8528aa757ef14210365f6 ]

As of commit b9ddd5091160793e ("iio: adc: max9611: Fix temperature
reading in probe"), max9611 initialization sometimes fails on the
Salvator-X(S) development board with:

    max9611 4-007f: Invalid value received from ADC 0x8000: aborting
    max9611: probe of 4-007f failed with error -5

The max9611 driver tests communications with the chip by reading the die
temperature during the probe function, which returns an invalid value.

According to the datasheet, the typical ADC conversion time is 2 ms, but
no minimum or maximum values are provided.  Maxim Technical Support
confirmed this was tested with temperature Ta=25 degreeC, and promised
to inform me if a maximum/minimum value is available (they didn't get
back to me, so I assume it is not).

However, the driver assumes a 1 ms conversion time.  Usually the
usleep_range() call returns after more than 1.8 ms, hence it succeeds.
When it returns earlier, the data register may be read too early, and
the previous measurement value will be returned.  After boot, this is
the temperature POR (power-on reset) value, causing the failure above.

Fix this by increasing the delay from 1000-2000 µs to 3000-3300 µs.

Note that this issue has always been present, but it was exposed by the
aformentioned commit.

Fixes: 69780a3bbc0b1e7e ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fixed kernel panic when booting with DP-to-HDMI dongle

[ Upstream commit a51d9f8fe756beac51ce26ef54195da00a260d13 ]

[Why]
In dc_link_is_dp_sink_present, if dal_ddc_open fails, then
dal_gpio_destroy_ddc is called, destroying pin_data and pin_clock. They
are created only on dc_construct, and next aux access will cause a panic.

[How]
Instead of calling dal_gpio_destroy_ddc, call dal_ddc_close.

Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: add cache flush workaround to gfx8 emit_fence

[ Upstream commit bf26da927a1cd57c9deb2db29ae8cf276ba8b17b ]

The same workaround is used for gfx7.
Both PAL and Mesa use it for gfx8 too, so port this commit to
gfx_v8_0_ring_emit_fence_gfx.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: add check before enabling/disabling broadcast mode

[ Upstream commit 6e807535dae5dbbd53bcc5e81047a20bf5eb08ea ]

When security violation from new vbios happens, data fabric is
risky to stop working. So prevent the direct access to DF
mmFabricConfigAccessControl from the new vbios and onwards.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fc: fix double-free scenarios on hw queues

[ Upstream commit c869e494ef8b5846d9ba91f1e922c23cd444f0c1 ]

If an error occurs on one of the ios used for creating an
association, the creating routine has error paths that are
invoked by the command failure and the error paths will free
up the controller resources created to that point.

But... the io was ultimately determined by an asynchronous
completion routine that detected the error and which
unconditionally invokes the error_recovery path which calls
delete_association. Delete association deletes all outstanding
io then tears down the controller resources. So the
create_association thread can be running in parallel with
the error_recovery thread. What was seen was the LLDD received
a call to delete a queue, causing the LLDD to do a free of a
resource, then the transport called the delete queue again
causing the driver to repeat the free call. The second free
routine corrupted the allocator. The transport shouldn't be
making the duplicate call, and the delete queue is just one
of the resources being freed.

To fix, it is realized that the create_association path is
completely serialized with one command at a time. So the
failed io completion will always be seen by the create_association
path and as of the failure, there are no ios to terminate and there
is no reason to be manipulating queue freeze states, etc.
The serialized condition stays true until the controller is
transitioned to the LIVE state. Thus the fix is to change the
error recovery path to check the controller state and only
invoke the teardown path if not already in the CONNECTING state.

Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme_fc: add module to ops template to allow module references

[ Upstream commit 863fbae929c7a5b64e96b8a3ffb34a29eefb9f8f ]

In nvme-fc: it's possible to have connected active controllers
and as no references are taken on the LLDD, the LLDD can be
unloaded. The controller would enter a reconnect state and as
long as the LLDD resumed within the reconnect timeout, the
controller would resume. But if a namespace on the controller
is the root device, allowing the driver to unload can be problematic.
To reload the driver, it may require new io to the boot device,
and as it's no longer connected we get into a catch-22 that
eventually fails, and the system locks up.

Fix this issue by taking a module reference for every connected
controller (which is what the core layer did to the transport
module). Reference is cleared when the controller is removed.

Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.93

spi: fsl: use platform_get_irq() instead of of_irq_to_resource()

commit 63aa6a692595d47a0785297b481072086b9272d2 upstream.

Unlike irq_of_parse_and_map() which has a dummy definition on SPARC,
of_irq_to_resource() hasn't.

But as platform_get_irq() can be used instead and is generic, use it.

Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 3194d2533eff ("spi: fsl: don't map irq during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: baytrail: Really serialize all register accesses

[ Upstream commit 40ecab551232972a39cdd8b6f17ede54a3fdb296 ]

Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
added a spinlock around all register accesses because:

"There is a hardware issue in Intel Baytrail where concurrent GPIO register
access might result reads of 0xffffffff and writes might get dropped
completely."

Testing has shown that this does not catch all cases, there are still
2 problems remaining

1) The original fix uses a spinlock per byt_gpio device / struct,
additional testing has shown that this is not sufficient concurent
accesses to 2 different GPIO banks also suffer from the same problem.

This commit fixes this by moving to a single global lock.

2) The original fix did not add a lock around the register accesses in
the suspend/resume handling.

Since pinctrl-baytrail.c is using normal suspend/resume handlers,
interrupts are still enabled during suspend/resume handling. Nothing
should be using the GPIOs when they are being taken down, _but_ the
GPIOs themselves may still cause interrupts, which are likely to
use (read) the triggering GPIO. So we need to protect against
concurrent GPIO register accesses in the suspend/resume handlers too.

This commit fixes this by adding the missing spin_lock / unlock calls.

The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
confused after a suspend resume. The DSDT for this device has a bug
in its _LID method which reprograms the home and power button trigger-
flags requesting both high and low _level_ interrupts so the IRQs for
these 2 GPIOs continuously fire. This combined with the saving of
registers during suspend, triggers concurrent GPIO register accesses
resulting in saving 0xffffffff as pconf0 value during suspend and then
when restoring this on resume the pinmux settings get all messed up,
resulting in various I2C busses being stuck, the wifi no longer working
and often the tablet simply not coming out of suspend at all.

Cc: stable@vger.kernel.org
Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty/serial: atmel: fix out of range clock divider handling

[ Upstream commit cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 ]

Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode
register was already written thus the clock selection is ignored.

Fix by doing the baud rate calulation before setting the mode.

Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support")
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fsl: don't map irq during probe

[ Upstream commit 3194d2533efffae8b815d84729ecc58b6a9000ab ]

With lastest kernel, the following warning is observed at startup:

[    1.500609] ------------[ cut here ]------------
[    1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi'
[    1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0
[    1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564
[    1.530724] NIP:  c0197694 LR: c0197694 CTR: c0050d80
[    1.535762] REGS: df4a5af0 TRAP: 0700   Not tainted  (5.4.0-02248-g93532430a4ff)
[    1.543818] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 22028222  XER: 00000000
[    1.550524]
[    1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010
[    1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000
[    1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078
[    1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3
[    1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0
[    1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0
[    1.595829] Call Trace:
[    1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable)
[    1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70
[    1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80
[    1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8
[    1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc
[    1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4
[    1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418
[    1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0
[    1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128
[    1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc
[    1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c
[    1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100
[    1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c
[    1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c
[    1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0
[    1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4
[    1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4
[    1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204
[    1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110
[    1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c
[    1.719926] Instruction dump:
[    1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78
[    1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78
[    1.738556] ---[ end trace 05d0720bf2e352e2 ]---

The problem comes from the error path which calls
irq_dispose_mapping() while the IRQ has been requested with
devm_request_irq().

IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only
need is to get the IRQ virtual number. For that, use
of_irq_to_resource() instead of the
irq_of_parse_and_map()/irq_dispose_mapping() pair.

Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gtp: avoid zero size hashtable

[ Upstream commit 6a902c0f31993ab02e1b6ea7085002b9c9083b6a ]

GTP default hashtable size is 1024 and userspace could set specific
hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0
from userspace, hashtable will not work and panic will occur.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: fix an use-after-free in ipv4_pdp_find()

[ Upstream commit 94dc550a5062030569d4aa76e10e50c8fc001930 ]

ipv4_pdp_find() is called in TX packet path of GTP.
ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context.
In the current code, gtp->tid_hash and gtp->addr_hash are freed by
->dellink(), which is gtp_dellink().
But gtp_dellink() would be called while packets are processing.
So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash.
Instead, dev->priv_destructor() would be used because this callback
is called after all packet processing safely.

Test commands:
    ip link add veth1 type veth peer name veth2
    ip a a 172.0.0.1/24 dev veth1
    ip link set veth1 up
    ip a a 172.99.0.1/32 dev lo

    gtp-link add gtp1 &

    gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2
    ip r a  172.99.0.2/32 dev gtp1
    ip link set gtp1 mtu 1500

    ip netns add ns2
    ip link set veth2 netns ns2
    ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2
    ip netns exec ns2 ip link set veth2 up
    ip netns exec ns2 ip a a 172.99.0.2/32 dev lo
    ip netns exec ns2 ip link set lo up

    ip netns exec ns2 gtp-link add gtp2 &
    ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1
    ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2
    ip netns exec ns2 ip link set gtp2 mtu 1500

    hping3 172.99.0.2 -2 --flood &
    ip link del gtp1

Splat looks like:
[   72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195
[   72.569631][ T1195]
[   72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199
[   72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   72.571438][ T1195] Call Trace:
[   72.571764][ T1195]  dump_stack+0x96/0xdb
[   72.572171][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.572761][ T1195]  print_address_description.constprop.5+0x1be/0x360
[   72.573400][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.573971][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.574544][ T1195]  __kasan_report+0x12a/0x16f
[   72.575014][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.575593][ T1195]  kasan_report+0xe/0x20
[   72.576004][ T1195]  ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.576577][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[ ... ]
[   72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28
[   72.648512][ T1195] #PF: supervisor read access in kernel mode
[   72.649158][ T1195] #PF: error_code(0x0000) - not-present page
[   72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060
[   72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G    B             5.5.0-rc1 #199
[   72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp]
[ ... ]
[   72.679168][ T1195] Call Trace:
[   72.679603][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[   72.681915][ T1195]  ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp]
[   72.682513][ T1195]  ? lock_acquire+0x164/0x3b0
[   72.682966][ T1195]  ? gtp_dev_xmit+0x35e/0x890 [gtp]
[   72.683481][ T1195]  gtp_dev_xmit+0x3c2/0x890 [gtp]
[ ... ]

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: fix wrong condition in gtp_genl_dump_pdp()

[ Upstream commit 94a6d9fb88df43f92d943c32b84ce398d50bf49f ]

gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used
to dump pdp contexts. it would be re-executed because of dump packet size.

If dump packet size is too big, it saves current dump pointer
(gtp interface pointer, bucket, TID value) then it restarts dump from
last pointer.
Current GTP code allows adding zero TID pdp context but dump code
ignores zero TID value. So, last dump pointer will not be found.

In addition, this patch adds missing rcu_read_lock() in
gtp_genl_dump_pdp().

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not send empty skb from tcp_write_xmit()

[ Upstream commit 1f85e6267caca44b30c54711652b0726fadbb131 ]

Backport of commit fdfc5c8594c2 ("tcp: remove empty skb from
write queue in error cases") in linux-4.14 stable triggered
various bugs. One of them has been fixed in commit ba2ddb43f270
("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but
we still have crashes in some occasions.

Root-cause is that when tcp_sendmsg() has allocated a fresh
skb and could not append a fragment before being blocked
in sk_stream_wait_memory(), tcp_write_xmit() might be called
and decide to send this fresh and empty skb.

Sending an empty packet is not only silly, it might have caused
many issues we had in the past with tp->packets_out being
out of sync.

Fixes: c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Paasch <cpaasch@apple.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp/dccp: fix possible race __inet_lookup_established()

commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream.

Michal Kubecek and Firo Yang did a very nice analysis of crashes
happening in __inet_lookup_established().

Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN
(via a close()/socket()/listen() cycle) without a RCU grace period,
I should not have changed listeners linkage in their hash table.

They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt),
so that a lookup can detect a socket in a hash list was moved in
another one.

Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve
merge conflict for v4/v6 ordering fix"), we have to add
hlist_nulls_add_tail_rcu() helper.

Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[stable-4.19: we also need to update code in __inet_lookup_listener() and
inet6_lookup_listener() which has been removed in 5.0-rc1.]
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: marvell: mvpp2: phylink requires the link interrupt

[ Upstream commit f3f2364ea14d1cf6bf966542f31eadcf178f1577 ]

phylink requires the MAC to report when its link status changes when
operating in inband modes.  Failure to report link status changes
means that phylink has no idea when the link events happen, which
results in either the network interface's carrier remaining up or
remaining permanently down.

For example, with a fiber module, if the interface is brought up and
link is initially established, taking the link down at the far end
will cut the optical power.  The SFP module's LOS asserts, we
deactivate the link, and the network interface reports no carrier.

When the far end is brought back up, the SFP module's LOS deasserts,
but the MAC may be slower to establish link.  If this happens (which
in my tests is a certainty) then phylink never hears that the MAC
has established link with the far end, and the network interface is
stuck reporting no carrier.  This means the interface is
non-functional.

Avoiding the link interrupt when we have phylink is basically not
an option, so remove the !port->phylink from the test.

Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: do not allow adding duplicate tid and ms_addr pdp context

[ Upstream commit 6b01b1d9b2d38dc84ac398bfe9f00baff06a31e5 ]

GTP RX packet path lookups pdp context with TID. If duplicate TID pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, TID value should be unique.
GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, ms_addr value should be unique.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/dst: do not confirm neighbor for vxlan and geneve pmtu update

[ Upstream commit f081042d128a0c7acbd67611def62e1b52e2d294 ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

So disable the neigh confirm for vxlan and geneve pmtu update.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Tested-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sit: do not confirm neighbor when do pmtu update

[ Upstream commit 4d42df46d6372ece4cb4279870b46c2ea7304a47 ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti: do not confirm neighbor when do pmtu update

[ Upstream commit 8247a79efa2f28b44329f363272550c1738377de ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

Although vti and vti6 are immune to this problem because they are IFF_NOARP
interfaces, as Guillaume pointed. There is still no sense to confirm neighbour
here.

v5: Update commit description.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tunnel: do not confirm neighbor when do pmtu update

[ Upstream commit 7a1592bcb15d71400a98632727791d1e68ea0ee8 ]

When do tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

v5: No Change.
v4: Update commit description
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Fixes: 0dec879f636f ("net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TP")
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Tested-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/dst: add new function skb_dst_update_pmtu_no_confirm

[ Upstream commit 07dc35c6e3cc3c001915d05f5bf21f80a39a0970 ]

Add a new function skb_dst_update_pmtu_no_confirm() for callers who need
update pmtu but should not do neighbor confirm.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: do not confirm neighbor when do pmtu update

[ Upstream commit 6e9105c73f8d2163d12d5dfd762fd75483ed30f5 ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not
call dst_confirm_neigh(), we still set it to false to keep consistency with
IPv6 code.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_gre: do not confirm neighbor when do pmtu update

[ Upstream commit 675d76ad0ad5bf41c9a129772ef0aba8f57ea9a7 ]

When we do ipv6 gre pmtu update, we will also do neigh confirm currently.
This will cause the neigh cache be refreshed and set to REACHABLE before
xmit.

But if the remote mac address changed, e.g. device is deleted and recreated,
we will not able to notice this and still use the old mac address as the neigh
cache is REACHABLE.

Fix this by disable neigh confirm when do pmtu update

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: add bool confirm_neigh parameter for dst_ops.update_pmtu

[ Upstream commit bd085ef678b2cc8c38c105673dfe8ff8f5ec0c57 ]

The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.

But for tunnel code, it will call pmtu before xmit, like:
  - tnl_update_pmtu()
    - skb_dst_update_pmtu()
      - ip6_rt_update_pmtu()
        - __ip6_rt_update_pmtu()
          - dst_confirm_neigh()

If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.

So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.

On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.

To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Suggested-by: David Miller <davem@davemloft.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost/vsock: accept only packets with the right dst_cid

[ Upstream commit 8a3cc29c316c17de590e3ff8b59f3d6cbfd37b0a ]

When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.

The host should accept only packets where dst_cid is
equal to the host CID.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: fix integer overflow while computing available space in sk_rcvbuf

[ Upstream commit feed8a4fc9d46c3126fb9fcae0e9248270c6321a ]

When the size of the receive buffer for a socket is close to 2^31 when
computing if we have enough space in the buffer to copy a packet from
the queue to the buffer we might hit an integer overflow.

When an user set net.core.rmem_default to a value close to 2^31 UDP
packets are dropped because of this overflow. This can be visible, for
instance, with failure to resolve hostnames.

This can be fixed by casting sk_rcvbuf (which is an int) to unsigned
int, similarly to how it is done in TCP.

Signed-off-by: Antonio Messina <amessina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix highest_sack and highest_sack_seq

[ Upstream commit 853697504de043ff0bfd815bd3a64de1dce73dc7 ]

>From commit 50895b9de1d3 ("tcp: highest_sack fix"), the logic about
setting tp->highest_sack to the head of the send queue was removed.
Of course the logic is error prone, but it is logical. Before we
remove the pointer to the highest sack skb and use the seq instead,
we need to set tp->highest_sack to NULL when there is no skb after
the last sack, and then replace NULL with the real skb when new skb
inserted into the rtx queue, because the NULL means the highest sack
seq is tp->snd_nxt. If tp->highest_sack is NULL and new data sent,
the next ACK with sack option will increase tp->reordering unexpectedly.

This patch sets tp->highest_sack to the tail of the rtx queue if
it's NULL and new data is sent. The patch keeps the rule that the
highest_sack can only be maintained by sack processing, except for
this only case.

Fixes: 50895b9de1d3 ("tcp: highest_sack fix")
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptp: fix the race between the release of ptp_clock and cdev

[ Upstream commit a33121e5487b424339636b25c35d3a180eaa5f5e ]

In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:

ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[   48.010809] general protection fault: 0000 [#1] SMP
[   48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[   48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[   48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[   48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[   48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[   48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[   48.019470] ...                                              ^^^ a slub poison
[   48.023854] Call Trace:
[   48.024050]  __fput+0x21f/0x240
[   48.024288]  task_work_run+0x79/0x90
[   48.024555]  do_exit+0x2af/0xab0
[   48.024799]  ? vfs_write+0x16a/0x190
[   48.025082]  do_group_exit+0x35/0x90
[   48.025387]  __x64_sys_exit_group+0xf/0x10
[   48.025737]  do_syscall_64+0x3d/0x130
[   48.026056]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   48.026479] RIP: 0033:0x7f53b12082f6
[   48.026792] ...
[   48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[   48.045001] Fixing recursive fault but reboot is needed!

This happens in:

static void __fput(struct file *file)
{   ...
    if (file->f_op->release)
        file->f_op->release(inode, file); <<< cdev is kfree'd here
    if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
             !(mode & FMODE_PATH))) {
        cdev_put(inode->i_cdev); <<< cdev fields are accessed here

Namely:

__fput()
  posix_clock_release()
    kref_put(&clk->kref, delete_clock) <<< the last reference
      delete_clock()
        delete_ptp_clock()
          kfree(ptp) <<< cdev is embedded in ptp
  cdev_put
    module_put(p->owner) <<< *p is kfree'd, bang!

Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.

Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.

This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7fda ("chardev: add
helper function to register char devs with a struct device").

Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u
Analyzed-by: Stephen Johnston <sjohnsto@redhat.com>
Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs

[ Upstream commit bd6f48546b9cb7a785344fc78058c420923d7ed8 ]

GXBB and newer SoCs use the fixed FCLK_DIV2 (1GHz) clock as input for
the m250_sel clock. Meson8b and Meson8m2 use MPLL2 instead, whose rate
can be adjusted at runtime.

So far we have been running MPLL2 with ~250MHz (and the internal
m250_div with value 1), which worked enough that we could transfer data
with an TX delay of 4ns. Unfortunately there is high packet loss with
an RGMII PHY when transferring data (receiving data works fine though).
Odroid-C1's u-boot is running with a TX delay of only 2ns as well as
the internal m250_div set to 2 - no lost (TX) packets can be observed
with that setting in u-boot.

Manual testing has shown that the TX packet loss goes away when using
the following settings in Linux (the vendor kernel uses the same
settings):
- MPLL2 clock set to ~500MHz
- m250_div set to 2
- TX delay set to 2ns on the MAC side

Update the m250_div divider settings to only accept dividers greater or
equal 2 to fix the TX delay generated by the MAC.

iperf3 results before the change:
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   182 MBytes   153 Mbits/sec  514      sender
[  5]   0.00-10.00  sec   182 MBytes   152 Mbits/sec           receiver

iperf3 results after the change (including an updated TX delay of 2ns):
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-10.00  sec   927 MBytes   778 Mbits/sec    0      sender
[  5]   0.00-10.01  sec   927 MBytes   777 Mbits/sec           receiver

Fixes: 4f6a71b84e1afd ("net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlxfw: Fix out-of-memory error in mfa2 flash burning

[ Upstream commit a5bcd72e054aabb93ddc51ed8cde36a5bfc50271 ]

The burning process requires to perform internal allocations of large
chunks of memory. This memory doesn't need to be contiguous and can be
safely allocated by vzalloc() instead of kzalloc(). This patch changes
such allocation to avoid possible out-of-memory failure.

Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ena: fix napi handler misbehavior when the napi budget is zero

[ Upstream commit 24dee0c7478d1a1e00abdf5625b7f921467325dc ]

In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.

The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.

In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hrtimer: Annotate lockless access to timer->state

commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream.

syzbot reported various data-race caused by hrtimer_is_queued() reading
timer->state. A READ_ONCE() is required there to silence the warning.

Also add the corresponding WRITE_ONCE() when timer->state is set.

In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid
loading timer->state twice.

KCSAN reported these cases:

BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check

write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0:
__remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
__run_hrtimer kernel/time/hrtimer.c:1496 [inline]
__hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
__do_softirq+0x115/0x33f kernel/softirq.c:292
run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1:
tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline]
tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225
tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044
tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558
tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717
tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
sk_backlog_rcv include/net/sock.h:945 [inline]
__release_sock+0x135/0x1e0 net/core/sock.c:2435
release_sock+0x61/0x160 net/core/sock.c:2951
sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0x9f/0xc0 net/socket.c:657

BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check

write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0:
__remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
__run_hrtimer kernel/time/hrtimer.c:1496 [inline]
__hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830

read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1:
__tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265
tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline]
tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
sk_backlog_rcv include/net/sock.h:945 [inline]
__release_sock+0x135/0x1e0 net/core/sock.c:2435
release_sock+0x61/0x160 net/core/sock.c:2951
sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0x9f/0xc0 net/socket.c:657
__sys_sendto+0x21f/0x320 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto net/socket.c:1960 [inline]
__x64_sys_sendto+0x89/0xb0 net/socket.c:1960
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

[ tglx: Added comments ]

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191106174804.74723-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>