clk: qcom: gcc-qdu1000: Update the RCGs ops

The clock RCGs are required to be parked at safe clock source(XO)
during disable as per the hardware expectation and clk_rcg2_shared_ops
are the closest implementation for the same. Hence update the clock
RCG ops to clk_rcg2_shared_ops.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-9-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops

Update the GCC SDCC clock RCG ops to clk_rcg2_floor_ops to avoid
the overclocking issues on QDU1000 and QRU1000 SoCs.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-8-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-qdu1000: Add support for GDSCs

Add the GDSCs support for QDU1000 and QRU1000 SoCs.

Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-7-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support

Add the gcc_ddrss_ecpri_gsi_clk support as per the latest hardware
version of QDU1000 and QRU100 SoCs.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-6-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock

gcc_gpll1_out_even clock is referenced as a parent, but not registered
with the clock framework. Hence add support to register the same.

Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-5-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-qdu1000: Fix clkref clocks handling

Update the GCC clkref clock's halt_check to BRANCH_HALT, as it's
status bit is not inverted in the latest hardware version of QDU1000
and QRU1000 SoCs. While at it, fix the gcc clkref clock ops as well.

Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-4-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling

Fix the gcc pcie pipe clock handling as per the clk_regmap_phy_mux_ops
implementation to let the clock framework automatically park the clock
at XO when the clock is switched off and restore the parent when the
clock is switched on.

Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-3-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs

Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock
bindings for QDU1000 and QRU1000 SoCs. While at it, update the
maintainers list.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs

Use the floor ops to prevent warnings like this at suspend exit and boot:

mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz

Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock

With the removal of the mem noc clocks in the commit e224dc703521 ("clk:
qcom: gcc-ipq5332: drop the mem noc clocks"), we can drop the
gcc_apss_axi_clk_src clock as well, since there are no clocks uses this
clock as a parent.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230710102807.1189942-3-quic_kathirav@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: ipq5332: drop the mem noc clocks

Due to the recent design changes, all the mem noc clocks will be
configured by the bootloaders and it will be access protected by the TZ
firmware. So drop these clocks from the GCC driver.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230710102807.1189942-2-quic_kathirav@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks

Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.

Use the BRANCH_HALT_SKIP define to skip checking the halt bit.

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-6-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs

GPUCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
Add .name lookup to make sure older DTs consume the correct clock.

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-5-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs

Up until now, the GPLL0_DIV MMSS input has been modeled as a fixed
child of MMSS_GPLL0_DIV that's always-on. Properly representing the
former in the GCC driver makes us unable to keep doing so.

Consume MSS_GPLL0_DIV through fw_name ("gpll0_div") as well as add a
fixed .name link to keep backwards compatibility.

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-4-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly

Up until now, we've been relying on some non-descript hardware magic
to pinkypromise turn the clocks on for us. While new SoCs shine with
that feature, MSM8998 can not always be fully trusted.

Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual
enable voting.

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-3-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998

We've not been consuming that clock for no apparent reason. Describe it.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-2-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org' into clk-for-6.6

Merge additional MSM8998 GCC DeviceTree binding constants through a
topic branch to make them available to the DeviceTree source tree as
well.

dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs

GPLL0 has two separate outputs to both GPUSS and MMSS: one that's
2-divided and one that runs at the same rate as the GPLL0 itself.

Add the missing ones to the binding.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018

Add support for the global clock controller found on IPQ5018
based devices.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-3-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '1690533192-22220-2-git-send-email-quic_srichara@quicinc.com' into clk-for-6.6

Merge the IPQ5018 GCC Devicetree binding through a topic branch, in
order to the the clock defines.

dt-bindings: clock: Add IPQ5018 clock and reset

This patch adds support for the global clock controller found on
the IPQ5018 based devices.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src

GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Use the correct type of sleep/delay based on length

Use the fsleep() helper that (based on the length of the delay, see: [1])
chooses the correct sleep/delay functions.

[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt

Fixes: 2cb8a39b6781 ("clk: qcom: reset: Allow specifying custom reset delay")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-qcom_reset-v3-1-5958facd5db2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: fix some Kconfig corner cases

The SM_GCC_8550 symbol and others can only be built for ARM64 or when
compile testing, but it gets selected by other drivers that can also be
built for 32-bit ARCH_QCOM when not compile testing, which results in
a Kconfig warning:

WARNING: unmet direct dependencies detected for SM_GCC_8550
  Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=m] && (ARM64 || COMPILE_TEST [=n])
  Selected by [m]:
  - SM_GPUCC_8550 [=m] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=m]
  - SM_VIDEOCC_8550 [=m] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=m]

Add further 'depends on' statements to tighten this in a way that
avoids the missing dependencies.

Fixes: fd0b5b106fcab ("clk: qcom: Introduce SM8350 VIDEOCC")
Fixes: 441fe711be384 ("clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450")
Fixes: f53153a37969c ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230801105718.3658612-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8250: Fix gcc_sdcc2_apps_clk_src

GPLL9 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230802210359.408-1-patrick.whewell@sightlineapplications.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: lcc-msm8960: change pxo_parent_data to static

The pxo_parent_data inroduced in commit bac4675a4d1b ("clk: qcom:
drop lcc-mdm9615 in favour of lcc-msm8960") is only used in lcc-msm8960.c
now, change it to static.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803082125.521849-1-yangyingliang@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723190725.1619193-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: cbf-msm8996: Add support for MSM8996 Pro

The CBF PLL on MSM8996 Pro has a /4 post divisor instead of /2. Handle the
difference accordingly.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230527093934.101335-4-y.oudjana@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom,msm8996-cbf: Add compatible for MSM8996 Pro

The CBF clock on MSM8996 Pro has a different divisor compared to MSM8996
and is therefore not fully compatible with it. Add a new compatible string
to differentiate between them.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230527093934.101335-2-y.oudjana@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-mdm9615: drop the cxo clock

The gcc and lcc devices have been switched to the DT-defined cxo_board
clock. Now we can drop the manually defined cxo clock.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-mdm9615: use parent_hws/_data instead of parent_names

Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.

Note, the system names for xo clocks were changed from "cxo" to
"cxo_board" to follow the example of other platforms. This switches the
clocks to use DT-provided "cxo_board" clock instead of manually
registered "cxo" clock and allows us to drop the cxo clock.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock

The pll0_vote clock definitely should have pll0 as a parent (instead of
pll8).

Fixes: 7792a8d6713c ("clk: mdm9615: Add support for MDM9615 Clock Controllers")
Cc: stable@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: drop lcc-mdm9615 in favour of lcc-msm8960

The two LCC drivers, msm8960 and mdm9615 are almost the same. The only
difference is the platform clock: msm8960/apq8064 use pxo, while mdm9615
uses cxo. Drop the lcc-mdm9615 in favour of using lcc-msm8960 instead.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-mdm9615: use ARRAY_SIZE instead of specifying num_parents

Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: provide separate bindings for qcom,gcc-mdm9615

The global clock controller on MDM9615 uses external CXO and PLL7
clocks. Split the qcom,gcc-mdm9615 to the separate schema file.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: drop qcom,lcc-mdm9615 header file

The header file for qcom,lcc-mdm9615 and qcom,lcc-msm8960 is the same
(as well as the drivers). Drop the qcom,lcc-mdm9615.h in favour of
qcom,lcc-msm8960.h

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom,lcc.yaml: describe clocks for lcc,qcom-mdm9615

Describe parent clocks used by the LCC on the MDM9615 platform. It is
the list as the one for msm8960/apq8064, with only difference being
pxo/cxo replacement.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8350: Add SC8280XP support

SC8280XP, being a partial derivative of SM8350, shares almost the exact
same videocc block. Extend the 8350 driver to support the bigger brother.

The only notable changes are higher possible frequencies on some clocks
and some switcheroo within the XO/sleep registers (probably due to some
different board crystal configuration).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230703-topic-8280_videocc-v2-2-c88269806269@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom,sm8350-videocc: Add SC8280XP

SC8280XP reuses the SM8350 video clock controller block, changing just a
couple tunables. Docuemnt it.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230703-topic-8280_videocc-v2-1-c88269806269@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-sc8280xp: Use ret registers on GDSCs

The DISP_CC GDSCs have not been instructed to use the ret registers.
Fix that.

Fixes: 4a66e76fdb6d ("clk: qcom: Add SC8280XP display clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230725-topic-8280_dispcc_gdsc-v1-1-236590060531@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: turingcc-qcs404: fix missing resume during probe

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 892df0191b29 ("clk: qcom: Add QCS404 TuringCC")
Cc: stable@vger.kernel.org # 5.2
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: mss-sc7180: fix missing resume during probe

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 8def929c4097 ("clk: qcom: Add modem clock controller driver for SC7180")
Cc: stable@vger.kernel.org # 5.7
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: q6sstop-qcs404: fix missing resume during probe

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 6cdef2738db0 ("clk: qcom: Add Q6SSTOP clock controller for QCS404")
Cc: stable@vger.kernel.org # 5.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: lpasscc-sc7280: fix missing resume during probe

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Cc: stable@vger.kernel.org # 5.16
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8280xp: fix runtime PM imbalance on probe errors

Make sure to decrement the runtime PM usage count before returning in
case RCG dynamic frequency switch initialisation fails.

Fixes: 2a541abd9837 ("clk: qcom: gcc-sc8280xp: Add runtime PM")
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-sm8550: fix runtime PM imbalance on probe errors

Make sure to decrement the runtime PM usage count before returning in
case regmap initialisation fails.

Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Cc: stable@vger.kernel.org # 6.3
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-sm8450: fix runtime PM imbalance on probe errors

Make sure to decrement the runtime PM usage count before returning in
case regmap initialisation fails.

Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450")
Cc: stable@vger.kernel.org # 6.1
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: camcc-sc7180: fix async resume during probe

To make sure that the controller is runtime resumed and its power domain
is enabled before accessing its registers during probe, the synchronous
runtime PM interface must be used.

Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Cc: stable@vger.kernel.org # 5.11
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org' into clk-for-6.6

This series reshuffles things around, moving the management of SMD RPM
bus clocks to the interconnect framework where they belong. This helps
us solve a couple of issues:

1. We can work towards unused clk cleanup of RPMCC without worrying
   about it killing some NoC bus, resulting in the SoC dying.
   Deasserting actually unused RPM clocks (among other things) will
   let us achieve "true SoC-wide power collapse states", also known as
   VDD_LOW and VDD_MIN.

2. We no longer have to keep tons of quirky bus clock ifs in the icc
   driver. You either have a RPM clock and call "rpm set rate" or you
   have a single non-RPM clock (like AHB_CLK_SRC) or you don't have any.

3. There's less overhead - instead of going through layers and layers of
   the CCF, ratesetting comes down to calling max() and sending a single
   RPM message. ICC is very very dynamic so that's a big plus.

The clocks still need to be vaguely described in the clk-smd-rpm driver,
as it gives them an initial kickoff, before actually telling RPM to
enable DVFS scaling.  After RPM receives that command, all clocks that
have not been assigned a rate are considered unused and are shut down
in hardware, leading to the same issue as described in point 1.

We can consider marking them __initconst in the future, but this series
is very fat even without that..

Apart from that, it squashes a couple of bugs that really need fixing..

The series is merged through a topic branch to manage the dependencies
between interconnect, Qualcomm clocks and Qualcomm SoC.

interconnect: qcom: icc-rpm: Fix bandwidth calculations

Up until now, we've been aggregating the bandwidth values and only
dividing them by the bus width of the source node. This was completely
wrong, as different nodes on a given path may (and usually do) have
varying bus widths.  That in turn, resulted in the calculated clock rates
being completely bogus - usually they ended up being much higher, as
NoC_A<->NoC_B links are very wide.

Since we're not using the aggregate bandwidth value for anything other
than clock rate calculations, remodel qcom_icc_bus_aggregate() to
calculate the per-context clock rate for a given provider, taking into
account the bus width of every individual node.

Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-22-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req

Currently, we're setting the aggregated-on-provider bandwidth on each
node, individually. That is of course incorrect and results in far too
high votes. Use the correct values to ensure we're not wasting power.

Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-21-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: icc-rpm: Set bandwidth on both contexts

Up until now, for some reason we've only been setting bandwidth values
on the active-only context. That pretty much meant that RPM could lift
all votes when entering sleep mode. Or never sleep at all.

That in turn could potentially break things like USB wakeup, as the
connection between APSS and SNoC/PNoC would simply be dead.

Set the values appropriately.

Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-20-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: icc-rpm: Fix bucket number

SMD RPM only provides two buckets, one each for the active-only and
active-sleep RPM contexts. Use the correct constant to allocate and
operate on them.

This will make the qcom,icc.h header no longer work with this driver,
mostly because.. it was never meant to! The commit that introduced
bucket support to SMD RPM was trying to shove a square into a round
hole and it did not work out very well. That said, there are no
active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.

Fixes: dcbce7b0a79c ("interconnect: qcom: icc-rpm: Support multiple buckets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-19-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: smd-rpm: Separate out interconnect bus clocks

The interconnect bus clocks are now handled within the ICC framework.
They still however need to get a kickstart *before* we call
clk_smd_rpm_enable_scaling(), or RPM will assume that they should all
be running at 0 kHz and the system will inevitably die.

Separate them out to ensure such a kickstart can still take place.

As a happy accident, the file got smaller:

Total: Before=41951, After=41555, chg -0.94%

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-18-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: icc-rpm: Control bus rpmcc from icc

The sole purpose of bus clocks that were previously registered with
rpmcc was to convey the aggregated bandwidth to RPM. There's no good
reason to keep them outside the interconnect framework, as it only
adds to the plentiful complexity.

Add the required code to handle these clocks from within SMD RPM ICC.

RPM-owned bus clocks are no longer considered a thing, but sadly we
have to allow for the existence of HLOS-owned bus clocks, as some
(mostly older) SoCs (ab)use these for bus scaling (e.g. MSM8998 and
&mmcc AHB_CLK_SRC).

This in turn is trivially solved with a single *clk, which is filled
and used iff qp.bus_clk_desc is absent and we have a "bus" clock-names
entry in the DT node.

This change should(tm) be fully compatible with all sorts of old
Device Trees as far as the interconnect functionality goes (modulo
abusing bus clock handles or wrongly using the qcom,icc.h binding,
but that's a mistake in and of itself).

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-17-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: qcm2290: Hook up RPM bus clk definitions

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-16-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: msm8916: Hook up RPM bus clk definitions

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-15-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: msm8939: Hook up RPM bus clk definitions

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-14-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: qcs404: Hook up RPM bus clk definitions

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-13-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: msm8996: Hook up RPM bus clk definitions

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-12-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: sdm660: Hook up RPM bus clk definitions

Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-11-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: Define RPM bus clocks

Add the definitions for RPM bus clocks that will be used by many
different platforms.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-10-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code

Introduce qcom_icc_rpm_set_bus_rate() in preparation for handling RPM
clock resources within the interconnect framework. This lets us greatly
simplify all of the code handling, as setting the rate comes down to:

u32 rate_khz = max(clk.sleep_rate, clk.active_rate, clk_a.active_rate)
write_to_rpm(clock.description, rate_khz);

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-9-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: Fold smd-rpm.h into icc-rpm.h

smd-rpm.h is not very useful as-is and both files are always included
anyway.. Combine them.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-8-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: Add missing headers in icc-rpm.h

Currently the header does not provide all the required dependencies.
Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-7-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

interconnect: qcom: icc-rpm: Introduce keep_alive

The downstream kernel employs the concept of "keeping the bus alive"
by voting for the minimum (XO/19.2MHz) rate at all times on certain
(well, most) buses. This is a very important thing to have, as if we
either have a lackluster/wrong DT that doesn't specify a (high enough)
vote on a certain bus, we may lose access to the entire bus altogether.
This is very apparent when we only start introducing interconnect
support on a given platform and haven't yet introduced voting on all
peripherals.

The same can happen if we only have a single driver casting a vote on
a certain bus and that driver exits/crashes/suspends.

The keepalive vote is limited to the ACTIVE bucket, as keeping a
permanent vote on the SLEEP one could prevent the platform from properly
entering low power mode states.

Introduce the very same concept, with a slight twist: the vendor
kernel checks whether the rate is zero before setting the minimum
vote, but that's rather silly, as in doing so we're at the mercy
of CCF. Instead, explicitly clamp the rates to always be >= 19.2 MHz
for providers with keep_alive=true.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-6-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm

icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can only
do that after the clocks have been handed off and scaling has been
enabled in the RPM in clk-smd-rpm.

Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c
to avoid any possible races. icc_smd_rpm gets the driver data from
the smd-rpm device, so still register the platform device on the
smd-rpm parent device.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Konrad: remove unrelated cleanups]
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-5-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: smd-rpm: Move some RPM resources to the common header

In preparation for handling the bus clocks in the icc driver, carve out
some defines and a struct definition to the common rpm header.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-4-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

soc: qcom: smd-rpm: Use tabs for defines

Use tabs for defines to make things spaced consistently.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-3-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM

Add a preprocessor define to indicate the number of RPM contexts/states.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-2-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: interconnect: Add Qcom RPM ICC bindings

The SMD RPM interconnect driver requires different icc tags to the
RPMh driver. Add bindings to reflect that.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-1-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8280xp: Allow PCIe GDSCs to enter retention state

With the minimal system suspend support in place for the PCIe driver that
keeps the interconnect path voted, the ALWAYS_ON flag can now be dropped.

Also, the pwrsts PWRSTS_RET_ON flag should be used to allow the GDSCs to
enter the retention state when the parent domain get's turned off during
system suspend.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230707075926.11726-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm7150: Add CLK_OPS_PARENT_ENABLE to sdcc2 rcg

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: a808d58ddf29 ("clk: qcom: Add Global Clock Controller (GCC) driver for SM7150")
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230630191944.20282-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Update my email address

Update my email address from the defunct codeaurora.org domain to the
current quicinc.com domain.

Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230627173123.9221-1-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8280xp: Add missing GDSCs

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-3-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8280xp: Add missing GDSC flags

All of the 8280's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-1-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org' into clk-for-6.6

Merge a set of new SC8280XP GCC GDSC constants through a topic branch,
to allow them being introduce into the DeviceTree source as well.

dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gpucc-sm6350: Fix clock source names

fw_name for GCC inputs didn't match the bindings. Fix it.

Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-2-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gpucc-sm6350: Introduce index-based clk lookup

Add the nowadays-prefered and marginally faster way of looking up parent
clocks in the device tree. It also allows for clock-names-independent
operation, so long as the order (which is enforced by schema) is kept.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-1-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq9574: Add USB related clocks

Add the clocks needed for enabling USB in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/d1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com
[bjorn: Clock defines split out to separate commit]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch 'd1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com' into clk-for-6.6

Merge the USB clock constants from a topic branch, to allow them to be
used in DeviceTree source as well.

dt-bindings: clock: Add USB related clocks for IPQ9574

Add the clocks needed for enabling USB in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/d1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com
[bjorn: Split from driver patch, to allow merging into dts tree]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226

On msm8226 we also have OXILICX_GDSC but we need a slighly different
config, with a .cxcs defined for clock but with no parent.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-oxilicx-v2-1-f7e4ebff3d61@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Linux 6.5-rc1

MAINTAINERS 2: Electric Boogaloo

We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.

The answer is "No. No we cannot".

I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street.  And at the yearly
maintainer summit, we will all sing the alphabet song together.

I doubt I will keep doing this.  At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.

Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

 - swiotlb area sizing fixes (Petr Tesarik)

* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: reduce the number of areas to match actual memory pool size
  swiotlb: always set the number of areas before allocating the pool

Merge tag 'irq_urgent_for_v6.5_rc1' of git://git./linux/kernel/git/tip/tip

Pull irq update from Borislav Petkov:

 - Optimize IRQ domain's name assignment

* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Use return value of strreplace()

Merge tag 'x86_urgent_for_v6.5_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 fpu fix from Borislav Petkov:

 - Do FPU AP initialization on Xen PV too which got missed by the recent
   boot reordering work

* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Fix secondary processors' FPU initialization

Merge tag 'x86-core-2023-07-09' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
 "A single fix for the mechanism to park CPUs with an INIT IPI.

  On shutdown or kexec, the kernel tries to park the non-boot CPUs with
  an INIT IPI. But the same code path is also used by the crash utility.
  If the CPU which panics is not the boot CPU then it sends an INIT IPI
  to the boot CPU which resets the machine.

  Prevent this by validating that the CPU which runs the stop mechanism
  is the boot CPU. If not, leave the other CPUs in HLT"

* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Don't send INIT to boot CPU

Merge tag 'mips_6.5_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for KVM

 - fix for loongson build and cpu probing

 - DT fixes

* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
  MIPS: dts: add missing space before {
  MIPS: Loongson: Fix build error when make modules_install
  MIPS: KVM: Fix NULL pointer dereference
  MIPS: Loongson: Fix cpu_probe_loongson() again

Merge tag 'xfs-6.5-merge-6' of git://git./fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Nothing exciting here, just getting rid of a gcc warning that I got
  tired of seeing when I turn on gcov"

* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix uninit warning in xfs_growfs_data

Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull more smb client updates from Steve French:

 - fix potential use after free in unmount

 - minor cleanup

 - add worker to cleanup stale directory leases

* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add a laundromat thread for cached directories
  smb: client: remove redundant pointer 'server'
  cifs: fix session state transition to avoid use-after-free issue

Merge tag 'ntb-6.5' of https://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "Fixes for pci_clean_master, error handling in driver inits, and
  various other issues/bugs"

* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
  ntb: hw: amd: Fix debugfs_create_dir error checking
  ntb.rst: Fix copy and paste error
  ntb_netdev: Fix module_init problem
  ntb: intel: Remove redundant pci_clear_master
  ntb: epf: Remove redundant pci_clear_master
  ntb_hw_amd: Remove redundant pci_clear_master
  ntb: idt: drop redundant pci_enable_pcie_error_reporting()
  MAINTAINERS: git://github -> https://github.com for jonmason
  NTB: EPF: fix possible memory leak in pci_vntb_probe()
  NTB: ntb_tool: Add check for devm_kcalloc
  NTB: ntb_transport: fix possible memory leak while device_register() fails
  ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
  NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
  ntb: idt: Fix error handling in idt_pci_driver_init()

mm: lock newly mapped VMA with corrected ordering

Lockdep is certainly right to complain about

  (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
                 but task is already holding lock:
  (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db

Invert those to the usual ordering.

Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git./linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "16 hotfixes. Six are cc:stable and the remainder address post-6.4
  issues"

The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.

* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  lib: dhry: fix sleeping allocations inside non-preemptable section
  kasan, slub: fix HW_TAGS zeroing with slub_debug
  kasan: fix type cast in memory_is_poisoned_n
  mailmap: add entries for Heiko Stuebner
  mailmap: update manpage link
  bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
  MAINTAINERS: add linux-next info
  mailmap: add Markus Schneider-Pargmann
  writeback: account the number of pages written back
  mm: call arch_swap_restore() from do_swap_page()
  squashfs: fix cache race with migration
  mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
  docs: update ocfs2-devel mailing list address
  MAINTAINERS: update ocfs2-devel mailing list address
  mm: disable CONFIG_PER_VMA_LOCK until its fixed
  fork: lock VMAs of the parent process when forking

fork: lock VMAs of the parent process when forking

When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().

We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable.  For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.

A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.

Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults.  But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.

This fix can potentially regress some fork-heavy workloads.  Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression.  If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance.  Further
optimizations are possible if this regression proves to be problematic.

Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: lock newly mapped VMA which can be modified after it becomes visible

mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock.  This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified.  Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.

Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.

Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: lock a vma before stack expansion

With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.

Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "A few late arriving patches that missed the initial pull request. It's
  mostly bug fixes (the dt-bindings is a fix for the initial pull)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Remove unused function declaration
  scsi: target: docs: Remove tcm_mod_builder.py
  scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
  scsi: dt-bindings: ufs: qcom: Fix ICE phandle
  scsi: core: Simplify scsi_cdl_check_cmd()
  scsi: isci: Fix comment typo
  scsi: smartpqi: Replace one-element arrays with flexible-array members
  scsi: target: tcmu: Replace strlcpy() with strscpy()
  scsi: ncr53c8xx: Replace strlcpy() with strscpy()
  scsi: lpfc: Fix lpfc_name struct packing