firmware: imx: misc: Align imx sc msg structs to 4

commit 1e6a4eba693ac72e6f91b4252458c933110e5f4c upstream.

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y:

    BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0

It shouldn't cause an issues in normal use because these structs are
always allocated on the stack.

Fixes: 15e1f2bc8b3b ("firmware: imx: add misc svc support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY

commit 26c4b4758fce8f0ae744335e1762213be29db441 upstream.

There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek.

Remove the unexisting ethphy1 port.

This fixes a run-time warning:

mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.

Fixes: fdea904e85e1 ("arm64: dts: imx: add imx8qxp mek support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6: phycore-som: fix emmc supply

commit eb0bbba7636b9fc81939d6087a5fe575e150c95a upstream.

Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong.
The default module behaviour is to power VCCQ and VCC by the 3.3V power
rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc
power rail using a solder jumper.

Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

commit 46b7edf1c7b7c91004c4db2c355cbd033f2385f9 upstream.

I've noticed that when writing data to the modem the writes can time out
at some point eventually. Looks like kicking the modem idle GPIO every
600 ms instead of once a second fixes the issue. Note that this rate is
different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS
that we still want to keep at 1 second, so let's add a separate define for
PHY_MDM6600_IDLE_KICK_MS.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling

commit be4e3c737eebd75815633f4b8fd766defaf0f1fc upstream.

We have an interrupt handler for the wake-up GPIO pin, but we're missing
the code to wake-up the system. This can cause timeouts receiving data
for the UART that shares the wake-up GPIO pin with the USB PHY.

All we need to do is just wake the system and kick the autosuspend
timeout to fix the issue.

Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/selftests: Fix return in assert_mmap_offset()

commit f4aaa44e8b20f7e0d4ea68d3bca4968b6ae5aaff upstream.

The assert_mmap_offset() returns type bool so if we return an error
pointer that is "return true;" or success.  If we have an error, then
we should return false.

Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain
(cherry picked from commit efbf928824820f2738f41271934f6ec2c6ebd587)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Program MBUS with rmw during initialization

commit c725161924f9a5872a3e53b73345a6026a5c170e upstream.

It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.

Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
(cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: de2/de3: Remove unsupported VI layer formats

commit a4769905f0ae32cae4f096f646ab03b8b4794c74 upstream.

YUV444 and YVU444 are planar formats, but HW format RGB888 is packed.
This means that those two mappings were never correct. Remove them.

Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix DE2 VI layer format support

commit 20896ef137340e9426cf322606f764452f5eb960 upstream.

DE2 VI layer doesn't support blending which means alpha channel is
ignored. Replace all formats with alpha with "don't care" (X) channel.

Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Add separate DE3 VI layer formats

commit 169ca4b38932112e8b2ee8baef9cea44678625b3 upstream.

DE3 VI layers support alpha blending, but DE2 VI layers do not.
Additionally, DE3 VI layers support 10-bit RGB and YUV formats.

Make a separate list for DE3.

Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: kirin: Revert "Fix for hikey620 display offset problem"

commit 1b79cfd99ff5127e6a143767b51694a527b3ea38 upstream.

This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592.

With the commit ff57c6513820 ("drm: kirin: Fix for hikey620
display offset problem") we added support for handling LDI
overflows by resetting the hardware.

However, its been observed that when we do hit the LDI overflow
condition, the irq seems to be screaming, and we do nothing but
stream:
  [drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow!
over and over to the screen

I've tried a few appraoches to avoid this, but none has yet
been successful and the cure here is worse then the original
disease, so revert this for now.

Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303163228.52741-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Don't try to map on error faults

commit eb9d8ddbc107d02e489681f9dcbf93949e1a99a4 upstream.

If the exception type isn't a translation fault, don't try to map and
instead go straight to a terminal fault.

Otherwise, we can get flooded by kernel warnings and further faults.

Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212202236.13095-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel-quadspi: fix possible MMIO window size overrun

commit 8e093ea4d3593379be46b845b9e823179558047e upstream.

The QSPI controller memory space is limited to 128MB:
0x9000_00000-0x9800_00000/0XD000_0000--0XD800_0000.

There are nor flashes that are bigger in size than the memory size
supported by the controller: Micron MT25QL02G (256 MB).

Check if the address exceeds the MMIO window size. An improvement
would be to add support for regular SPI mode and fall back to it
when the flash memories overrun the controller's memory space.

Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200228155437.1558219-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: Correct DAPM handling of active widgets during shutdown

commit 9b3193089e77d3b59b045146ff1c770dd899acb1 upstream.

commit c2caa4da46a4 ("ASoC: Fix widget powerdown on shutdown") added a
set of the power state during snd_soc_dapm_shutdown to ensure the
widgets powered off. However, when commit 39eb5fd13dff
("ASoC: dapm: Delay w->power update until the changes are written")
added the new_power member of the widget structure, to differentiate
between the current power state and the target power state, it did not
update the shutdown to use the new_power member.

As new_power has not updated it will be left in the state set by the
last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence
for the shutdown proceeds it will turn the widgets on (despite them
already being on) rather than turning them off.

Fixes: 39eb5fd13dff ("ASoC: dapm: Delay w->power update until the changes are written")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Skylake: Fix available clock counter incrementation

commit 8308a09e87d2cb51adb186dc7d5a5c1913fb0758 upstream.

Incrementation of avail_clk_cnt was incorrectly moved to error path. Put
it back to success path.

Fixes: 6ee927f2f01466 ('ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk dev')
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200224125202.13784-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path

commit ac0a68997935c4acb92eaae5ad8982e0bb432d56 upstream.

When we get a clock error during probe we have to call
regulator_bulk_disable before bailing out, otherwise we trigger
a warning in regulator_put.

Fix this by using "goto err" like in the error cases above.

Fixes: 5a3af1293194d ("ASoC: pcm512x: Add PCM512x driver")
Signed-off-by: Matthias Reichl <hias@horus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200220202956.29233-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output

commit 6c89ffea60aa3b2a33ae7987de1e84bfb89e4c9e upstream.

dpcm_show_state() invokes multiple snprintf() calls to concatenate
formatted strings on the fixed size buffer.  The usage of snprintf()
is supposed for avoiding the buffer overflow, but it doesn't work as
expected because snprintf() doesn't return the actual output size but
the size to be written.

Fix this bug by replacing all snprintf() calls with scnprintf()
calls.

Fixes: f86dcef87b77 ("ASoC: dpcm: Add debugFS support for DPCM")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()

[ Upstream commit 59bee45b9712c759ea4d3dcc4eff1752f3a66558 ]

Stefan reported a strange kernel fault which turned out to be due to a
missing KUAP disable in flush_coherent_icache() called from
flush_icache_range().

The fault looks like:

  Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009)
  BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00
  Faulting instruction address: 0xc00000000007232c
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
  CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79
  NIP:  c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000
  REGS: c000001e11093940 TRAP: 0300   Not tainted  (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40)
  MSR:  900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 28000884  XER: 00000000
  CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0
  GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00
  GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000
  GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80
  GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000
  GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000
  GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20
  GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80
  GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00
  NIP flush_icache_range+0x5c/0x80
  LR  handle_rt_signal64+0x95c/0xc2c
  Call Trace:
    0xc000001e11093d90 (unreliable)
    handle_rt_signal64+0x93c/0xc2c
    do_notify_resume+0x310/0x430
    ret_from_except_lite+0x70/0x74
  Instruction dump:
  409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d
  60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070

This path through handle_rt_signal64() to setup_trampoline() and
flush_icache_range() is only triggered by 64-bit processes that have
unmapped their VDSO, which is rare.

flush_icache_range() takes a range of addresses to flush. In
flush_coherent_icache() we implement an optimisation for CPUs where we
know we don't actually have to flush the whole range, we just need to
do a single icbi.

However we still execute the icbi on the user address of the start of
the range we're flushing. On CPUs that also implement KUAP (Power9)
that leads to the spurious fault above.

We should be able to pass any address, including a kernel address, to
the icbi on these CPUs, which would avoid any interaction with KUAP.
But I don't want to make that change in a bug fix, just in case it
surfaces some strange behaviour on some CPU.

So for now just disable KUAP around the icbi. Note the icbi is treated
as a load, so we allow read access, not write as you'd expect.

Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200303235708.26004-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Convert flush_icache_range & friends to C

[ Upstream commit 23eb7f560a2a6a1b0dbaaaae8685da75314347e4 ]

Similar to commit 22e9c88d486a
("powerpc/64: reuse PPC32 static inline flush_dcache_range()")
this patch converts the following ASM symbols to C:
    flush_icache_range()
    __flush_dcache_icache()
    __flush_dcache_icache_phys()

This was done as we discovered a long-standing bug where the length of the
range was truncated due to using a 32 bit shift instead of a 64 bit one.

By converting these functions to C, it becomes easier to maintain.

flush_dcache_icache_phys() retains a critical assembler section as we must
ensure there are no memory accesses while the data MMU is disabled
(authored by Christophe Leroy). Since this has no external callers, it has
also been made static, allowing the compiler to inline it within
flush_dcache_icache_page().

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Minor fixups, don't export __flush_dcache_icache()]
Link: https://lore.kernel.org/r/20191104023305.9581-5-alastair@au1.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: define helpers to get L1 icache sizes

[ Upstream commit 7a0745c5e03ff1129864bc6d80f5c4417e8d7893 ]

This patch adds helpers to retrieve icache sizes, and renames the existing
helpers to make it clear that they are for dcache.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104023305.9581-4-alastair@au1.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: intel: skl: Fix possible buffer overflow in debug outputs

commit 549cd0ba04dcfe340c349cd983bd440480fae8ee upstream.

The debugfs output of intel skl driver writes strings with multiple
snprintf() calls with the fixed size.  This was supposed to avoid the
buffer overflow but actually it still would, because snprintf()
returns the expected size to be output, not the actual output size.

Fix it by replacing snprintf() calls with scnprintf().

Fixes: d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: intel: skl: Fix pin debug prints

commit 64bbacc5f08c01954890981c63de744df1f29a30 upstream.

skl_print_pins() loops over all given pins but it overwrites the text
at the very same position while increasing the returned length.
Fix this to show the all pin contents properly.

Fixes: d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: Fix snd_sof_ipc_stream_posn()

commit 613cea5935e83cb5a7d182ee3f98d54620e102e2 upstream.

We're passing "&posn" instead of "posn" so it ends up corrupting
memory instead of doing something useful.

Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200303101858.ytehbrivocyp3cnf@kili.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix memleak in soc_tplg_manifest_load()

commit 242c46c023610dbc0213fc8fb6b71eb836bc5d95 upstream.

In case of ABI version mismatch, _manifest needs to be freed as
it is just a copy of the original topology manifest. However, if
a driver manifest handler is defined, that would get executed and
the cleanup is never reached. Fix that by getting the return status
of manifest() instead of returning directly.

Fixes: 583958fa2e52 ("ASoC: topology: Make manifest backward compatible from ABI v4")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix memleak in soc_tplg_link_elems_load()

commit 2b2d5c4db732c027a14987cfccf767dac1b45170 upstream.

If soc_tplg_link_config() fails, _link needs to be freed in case of
topology ABI version mismatch. However the current code is returning
directly and ends up leaking memory in this case.
This patch fixes that.

Fixes: 593d9e52f9bb ("ASoC: topology: Add support to configure existing physical DAI links")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-2-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: fix resource id creation race

commit fbb30168c7395b9cfeb9e6f7b0c0bca854a6552d upstream.

The previous code was not thread safe and caused
undefined behavior from spurious duplicate resource IDs.
In this patch, an atomic_t is used instead. We no longer
see any duplicate IDs in tests with this change.

Fixes: 16065fcdd19d ("drm/virtio: do NOT reuse resource ids")
Signed-off-by: John Bates <jbates@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200220225319.45621-1-jbates@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: make resource id workaround runtime switchable.

commit 3e93bc2a58aa241081e043ef9e6e86c42808499a upstream.

Also update the comment with a reference to the virglrenderer fix.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822102614.18164-1-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: bcm63xx-hsspi: Really keep pll clk enabled

commit 51bddd4501bc414b8b1e8f4d096b4a5304068169 upstream.

The purpose of commit 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
was to keep the pll clk enabled through the lifetime of the device.

In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()'
calls have been added in the error handling path of the probe function, in
the remove function and in the suspend and resume functions.

However, a 'clk_disable_unprepare()' call has been unfortunately left in
the probe function. So the commit seems to be more or less a no-op.

Axe it now, so that the pll clk is left enabled through the lifetime of
the device, as described in the commit.

Fixes: 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20200228213838.7124-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: ls1021a: Restore MDIO compatible to gianfar

commit 7155c44624d061692b4c13aa8343f119c67d4fc0 upstream.

The difference between "fsl,etsec2-mdio" and "gianfar" has to do with
the .get_tbipa function, which calculates the address of the TBIPA
register automatically, if not explicitly specified. [ see
drivers/net/ethernet/freescale/fsl_pq_mdio.c ]. On LS1021A, the TBIPA
register is at offset 0x30 within the port register block, which is what
the "gianfar" method of calculating addresses actually does.

Luckily, the bad "compatible" is inconsequential for ls1021a.dtsi,
because the TBIPA register is explicitly specified via the second "reg"
(<0x0 0x2d10030 0x0 0x4>), so the "get_tbipa" function is dead code.
Nonetheless it's good to restore it to its correct value.

Background discussion:
https://www.spinics.net/lists/stable/msg361156.html

Fixes: c7861adbe37f ("ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-sm1-sei610: add missing interrupt-names

commit 5bea1336ed2c939328999c64de28792e8dc0699b upstream.

add missing "host-wakeup interrupt names

Fixes: 30388cc07572 ("arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt")

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200117133423.22602-1-glaroque@baylibre.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: fix congested_fn for request-based device

commit 974f51e8633f0f3f33e8f86bbb5ae66758aa63c7 upstream.

We neither assign congested_fn for requested-based blk-mq device nor
implement it correctly. So fix both.

Also, remove incorrect comment from dm_init_normal_md_queue and rename
it to dm_init_congested_fn.

Fixes: 4aa9c692e052 ("bdi: separate out congested state into a separate struct")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: Fix reference counter initial value of chunk works

commit ee63634bae02e13c8c0df1209a6a0ca5326f3189 upstream.

Dm-zoned initializes reference counters of new chunk works with zero
value and refcount_inc() is called to increment the counter. However, the
refcount_inc() function handles the addition to zero value as an error
and triggers the warning as follows:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 1506 at lib/refcount.c:25 refcount_warn_saturate+0x68/0xf0
...
CPU: 7 PID: 1506 Comm: systemd-udevd Not tainted 5.4.0+ #134
...
Call Trace:
 dmz_map+0x2d2/0x350 [dm_zoned]
 __map_bio+0x42/0x1a0
 __split_and_process_non_flush+0x14a/0x1b0
 __split_and_process_bio+0x83/0x240
 ? kmem_cache_alloc+0x165/0x220
 dm_process_bio+0x90/0x230
 ? generic_make_request_checks+0x2e7/0x680
 dm_make_request+0x3e/0xb0
 generic_make_request+0xcf/0x320
 ? memcg_drain_all_list_lrus+0x1c0/0x1c0
 submit_bio+0x3c/0x160
 ? guard_bio_eod+0x2c/0x130
 mpage_readpages+0x182/0x1d0
 ? bdev_evict_inode+0xf0/0xf0
 read_pages+0x6b/0x1b0
 __do_page_cache_readahead+0x1ba/0x1d0
 force_page_cache_readahead+0x93/0x100
 generic_file_read_iter+0x83a/0xe40
 ? __seccomp_filter+0x7b/0x670
 new_sync_read+0x12a/0x1c0
 vfs_read+0x9d/0x150
 ksys_read+0x5f/0xe0
 do_syscall_64+0x5b/0x180
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
...

After this warning, following refcount API calls for the counter all fail
to change the counter value.

Fix this by setting the initial reference counter value not zero but one
for the new chunk works. Instead, do not call refcount_inc() via
dmz_get_chunk_work() for the new chunks works.

The failure was observed with linux version 5.4 with CONFIG_REFCOUNT_FULL
enabled. Refcount rework was merged to linux version 5.5 by the
commit 168829ad09ca ("Merge branch 'locking-core-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"). After this
commit, CONFIG_REFCOUNT_FULL was removed and the failure was observed
regardless of kernel configuration.

Linux version 4.20 merged the commit 092b5648760a ("dm zoned: target: use
refcount_t for dm zoned reference counters"). Before this commit, dm
zoned used atomic_t APIs which does not check addition to zero, then this
fix is not necessary.

Fixes: 092b5648760a ("dm zoned: target: use refcount_t for dm zoned reference counters")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm writecache: verify watermark during resume

commit 41c526c5af46d4c4dab7f72c99000b7fac0b9702 upstream.

Verify the watermark upon resume - so that if the target is reloaded
with lower watermark, it will start the cleanup process immediately.

Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: report suspended device during destroy

commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 upstream.

The function dm_suspended returns true if the target is suspended.
However, when the target is being suspended during unload, it returns
false.

An example where this is a problem: the test "!dm_suspended(wc->ti)" in
writecache_writeback is not sufficient, because dm_suspended returns
zero while writecache_suspend is in progress.  As is, without an
enhanced dm_suspended, simply switching from flush_workqueue to
drain_workqueue still emits warnings:
workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries

writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function
flushes the current work. However, the workqueue may re-queue itself and
flush_workqueue doesn't wait for re-queued works to finish. Because of
this - the function writecache_writeback continues execution after the
device was suspended and then concurrently with writecache_dtr, causing
a crash in writecache_writeback.

We must use drain_workqueue - that waits until the work and all re-queued
works finish.

As a prereq for switching to drain_workqueue, this commit fixes
dm_suspended to return true after the presuspend hook and before the
postsuspend hook - just like during a normal suspend. It allows
simplifying the dm-integrity and dm-writecache targets so that they
don't have to maintain suspended flags on their own.

With this change use of drain_workqueue() can be used effectively.  This
change was tested with the lvm2 testsuite and cryptsetup testsuite and
the are no regressions.

Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Reported-by: Corey Marthaler <cmarthal@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: fix a crash due to incorrect work item cancelling

commit 7cdf6a0aae1cccf5167f3f04ecddcf648b78e289 upstream.

The crash can be reproduced by running the lvm2 testsuite test
lvconvert-thin-external-cache.sh for several minutes, e.g.:
  while :; do make check T=shell/lvconvert-thin-external-cache.sh; done

The crash happens in this call chain:
do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset
-> memset -> __memset -- which accesses an invalid pointer in the vmalloc
area.

The work entry on the workqueue is executed even after the bitmap was
freed. The problem is that cancel_delayed_work doesn't wait for the
running work item to finish, so the work item can continue running and
re-submitting itself even after cache_postsuspend. In order to make sure
that the work item won't be running, we must use cancel_delayed_work_sync.

Also, change flush_workqueue to drain_workqueue, so that if some work item
submits itself or another work item, we are properly waiting for both of
them.

Fixes: c6b4fcbad044 ("dm: add cache target")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix invalid table returned due to argument count mismatch

commit 7fc2e47f40dd77ab1fcbda6db89614a0173d89c7 upstream.

If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was
not specified on the command line (i.e. ic->recalculate_flag is false),
dm-integrity would return invalid table line - the reported number of
arguments would not match the real number.

Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix a deadlock due to offloading to an incorrect workqueue

commit 53770f0ec5fd417429775ba006bc4abe14002335 upstream.

If we need to perform synchronous I/O in dm_integrity_map_continue(),
we must make sure that we are not in the map function - in order to
avoid the deadlock due to bio queuing in generic_make_request. To
avoid the deadlock, we offload the request to metadata_wq.

However, metadata_wq also processes metadata updates for write requests.
If there are too many requests that get offloaded to metadata_wq at the
beginning of dm_integrity_map_continue, the workqueue metadata_wq
becomes clogged and the system is incapable of processing any metadata
updates.

This causes a deadlock because all the requests that need to do metadata
updates wait for metadata_wq to proceed and metadata_wq waits inside
wait_and_add_new_range until some existing request releases its range
lock (which doesn't happen because the range lock is released after
metadata update).

In order to fix the deadlock, we create a new workqueue offload_wq and
offload requests to it - so that processing of offload_wq is independent
from processing of metadata_wq.

Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix recalculation when moving from journal mode to bitmap mode

commit d5bdf66108419cdb39da361b58ded661c29ff66e upstream.

If we resume a device in bitmap mode and the on-disk format is in journal
mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise,
there would be non-recalculated blocks which would cause I/O errors.

Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list

commit c33ee1301c393a241d6424e36eff1071811b1064 upstream.

The interrupt handler puts a half-completed DMA descriptor on a free list
and then schedules tasklet to process bottom half of the descriptor that
executes client's callback, this creates possibility to pick up the busy
descriptor from the free list. Thus, let's disallow descriptor's re-use
until it is fully processed.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200209163356.6439-3-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: tegra-apb: Fix use-after-free

commit 94788af4ed039476ff3527b0e6a12c1dc42cb022 upstream.

I was doing some experiments with I2C and noticed that Tegra APB DMA
driver crashes sometime after I2C DMA transfer termination. The crash
happens because tegra_dma_terminate_all() bails out immediately if pending
list is empty, and thus, it doesn't release the half-completed descriptors
which are getting re-used before ISR tasklet kicks-in.

 tegra-i2c 7000c400.i2c: DMA transfer timeout
 elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac
 list_del corruption, ddbaac44->next is LIST_POISON1 (00000100)
 Modules linked in:
 CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events_freezable_power_ thermal_zone_device_check
 [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14)
 [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94)
 [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4)
 [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78)
 [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac)
 [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154)
 [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c)
 [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8)
 [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98)
 [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80)
 [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c)
 [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94)
 Exception stack(0xde2ebb90 to 0xde2ebbd8)

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200209163356.6439-2-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: imx-sdma: Fix the event id check to include RX event for UART6

commit 25962e1a7f1d522f1b57ead2f266fab570042a70 upstream.

On i.MX6UL/ULL and i.MX6SX the DMA event id for the RX channel of
UART6 is '0'. To fix the broken DMA support for UART6, we change
the check for event_id0 to include '0' as a valid id.

Fixes: 1ec1e82f2510 ("dmaengine: Add Freescale i.MX SDMA support")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200225082139.7646-1-frieder.schrempf@kontron.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: imx-sdma: fix context cache

commit d288bddd8374e0a043ac9dde64a1ae6a09411d74 upstream.

There is a DMA problem with the serial ports on i.MX6.

When the following sequence is performed:

1) Open a port
2) Write some data
3) Close the port
4) Open a *different* port
5) Write some data
6) Close the port

The second write sends nothing and the second close hangs.
If the first close() is omitted it works.

Adding logs to the the UART driver shows that the DMA is being setup but
the callback is never invoked for the second write.

This used to work in 4.19.

Git bisect leads to:
ad0d92d: "dmaengine: imx-sdma: refine to load context only once"

This commit adds a "context_loaded" flag used to avoid unnecessary context
setups.
However the flag is only reset in sdma_channel_terminate_work(),
which is only invoked in a worker triggered by sdma_terminate_all() IF
there is an active descriptor.

So, if no active descriptor remains when the channel is terminated, the
flag is not reset and, when the channel is later reused the old context
is used.

Fix the problem by always resetting the flag in sdma_free_chan_resources().

Cc: stable@vger.kernel.org
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1580305274-27274-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: fix panic in gup_fast on large pud

commit 582b4e55403e053d8a48ff687a05174da9cc3fb0 upstream.

On s390 there currently is no implementation of pud_write(). That was ok
as long as we had our own implementation of get_user_pages_fast() which
checked for pud protection by testing the bit directly w/o using
pud_write(). The other callers of pud_write() are not reachable on s390.

After commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code") we use the generic get_user_pages_fast(), which
does call pud_write() in pud_access_permitted() for FOLL_WRITE access on
a large pud. Without an s390 specific pud_write(), the generic version is
called, which contains a BUG() statement to remind us that we don't have a
proper implementation. This results in a kernel panic.

Fix this by providing an implementation of pud_write().

Cc: <stable@vger.kernel.org> # 5.2+
Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: Fix unexpected write combine on resource

commit df057c914a9c219ac8b8ed22caf7da2f80c1fe26 upstream.

In the initial MIO support introduced in

commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")

zpci_map_resource() and zpci_setup_resources() default to using the
mio_wb address as the resource's start address. This means users of the
mapping, which includes most drivers, will get write combining on PCI
Stores. This may lead to problems when drivers expect write through
behavior when not using an explicit ioremap_wc().

Cc: stable@vger.kernel.org
Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes

commit 735a6dd02222d8d070c7bb748f25895239ca8c92 upstream.

Explicitly set X86_FEATURE_OSPKE via set_cpu_cap() instead of calling
get_cpu_cap() to pull the feature bit from CPUID after enabling CR4.PKE.
Invoking get_cpu_cap() effectively wipes out any {set,clear}_cpu_cap()
changes that were made between this_cpu->c_init() and setup_pku(), as
all non-synthetic feature words are reinitialized from the CPU's CPUID
values.

Blasting away capability updates manifests most visibility when running
on a VMX capable CPU, but with VMX disabled by BIOS.  To indicate that
VMX is disabled, init_ia32_feat_ctl() clears X86_FEATURE_VMX, using
clear_cpu_cap() instead of setup_clear_cpu_cap() so that KVM can report
which CPU is misconfigured (KVM needs to probe every CPU anyways).
Restoring X86_FEATURE_VMX from CPUID causes KVM to think VMX is enabled,
ultimately leading to an unexpected #GP when KVM attempts to do VMXON.

Arguably, init_ia32_feat_ctl() should use setup_clear_cpu_cap() and let
KVM figure out a different way to report the misconfigured CPU, but VMX
is not the only feature bit that is affected, i.e. there is precedent
that tweaking feature bits via {set,clear}_cpu_cap() after ->c_init()
is expected to work.  Most notably, x86_init_rdrand()'s clearing of
X86_FEATURE_RDRAND when RDRAND malfunctions is also overwritten.

Fixes: 0697694564c8 ("x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: spidev: Fix CS polarity if GPIO descriptors are used

commit 138c9c32f090894614899eca15e0bb7279f59865 upstream.

Commit f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
amended of_spi_parse_dt() to always set SPI_CS_HIGH for SPI slaves whose
Chip Select is defined by a "cs-gpios" devicetree property.

This change broke userspace applications which issue an SPI_IOC_WR_MODE
ioctl() to an spidev:  Chip Select polarity will be incorrect unless the
application is changed to set SPI_CS_HIGH.  And once changed, it will be
incompatible with kernels not containing the commit.

Fix by setting SPI_CS_HIGH in spidev_ioctl() (under the same conditions
as in of_spi_parse_dt()).

Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Reported-by: Simon Han <z.han@kunbus.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/fca3ba7cdc930cd36854666ceac4fbcf01b89028.1582027457.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf arm-spe: Fix endless record after being terminated

commit d6bc34c5ec18c3544c4b0d85963768dfbcd24184 upstream.

In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.

While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.

If the event is disabled, don't enable it again here.

Based-on-patch-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf cs-etm: Fix endless record after being terminated

commit c9f2833cb472cf9e0a49b7bcdc210a96017a7bfd upstream.

In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.

While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.

If the cs_etm event is disabled, we don't enable it again here.

Note: This patch is NOT tested since i don't have such a machine with
coresight feature, but the code seems buggy same as arm-spe and
intel-pt.

Tester notes:

Thanks for looping, Adrian.  Applied this patch and tested with
CoreSight on juno board, it works well.

Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-4-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-bts: Fix endless record after being terminated

commit 783fed2f35e2a6771c8dc6ee29b8c4b9930783ce upstream.

In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.

While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.

If the intel_bts event is disabled, we don't enable it again here.

Note: This patch is NOT tested since i don't have such a machine with
intel_bts feature, but the code seems buggy same as arm-spe and
intel-pt.

Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-3-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix endless record after being terminated

commit 2da4dd3d6973ffdfba4fa07f53240fda7ab22929 upstream.

In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.

While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be endless.

If the intel_pt event is disabled, we don't enable it again here.

Before the patch:

  huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
  intel_pt//u -p 46803
  ^C^C^C^C^C^C

After the patch:

  huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
  intel_pt//u -p 48591
  ^C[ perf record: Woken up 0 times to write data ]
  Warning:
  AUX data lost 504 times out of 4816!

  [ perf record: Captured and wrote 2024.405 MB perf.data ]

Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-2-adrian.hunter@intel.com
[ ahunter: removed redundant 'else' after 'return' ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-mem2mem.c: fix broken links

commit 316e730f1d8bb029fe6cec2468fb2a50424485b3 upstream.

The topology that v4l2_m2m_register_media_controller() creates for a
processing block actually created a source-to-source link and a sink-to-sink
link instead of two source-to-sink links.

Unfortunately v4l2-compliance never checked for such bad links, so this
went unreported for quite some time.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: <stable@vger.kernel.org> # for v4.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vicodec: process all 4 components for RGB32 formats

commit 49a56266f96f2c6608373464af8755b431ef1513 upstream.

Only ARGB32-type pixelformat were assumed to have 4 components, which is
wrong since RGB32-type pixelformats may have an alpha channel, so they
should also assume 4 color components.

The XRGB32-type pixelformats really have only 3 color components, but this
complicated matters since that creates strides that are sometimes width * 3
and sometimes width * 4, and in fact this can result in buffer overflows.

Keep things simple by just always processing all 4 color components.

In the future we might want to optimize this again for the XRGB32-type
pixelformats, but for now keep it simple and robust.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.4 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mc-entity.c: use & to check pad flags, not ==

commit 044041cd5227ec9ccf969f4bf1cc08bffe13b9d3 upstream.

These are bits so to test if a pad is a sink you use & but not ==.

It looks like the only reason this hasn't caused problems before is that
media_get_pad_index() is currently only used with pads that do not set the
MEDIA_PAD_FL_MUST_CONNECT flag. So a pad really had only the SINK or SOURCE
flag set and nothing else.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.3 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: hantro: Fix broken media controller links

commit d171c45da874e3858a83e6377e00280a507fe2f2 upstream.

The driver currently creates a broken topology,
with a source-to-source link and a sink-to-sink
link instead of two source-to-sink links.

Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: <stable@vger.kernel.org> # for v5.3 and up
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, push sel_lock up

commit e8c75a30a23c6ba63f4ef6895cbf41fd42f21aa2 upstream.

sel_lock cannot nest in the console lock. Thanks to syzkaller, the
kernel states firmly:

> WARNING: possible circular locking dependency detected
> 5.6.0-rc3-syzkaller #0 Not tainted
> ------------------------------------------------------
> syz-executor.4/20336 is trying to acquire lock:
> ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>
> but task is already holding lock:
> ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 (sel_lock){+.+.}:
>        mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118
>        set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217
>        set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181
>        tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050
>        vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364

This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock

> -> #1 (console_lock){+.+.}:
>        console_lock+0x46/0x70 kernel/printk/printk.c:2289
>        con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223
>        n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350
>        do_tty_write drivers/tty/tty_io.c:962 [inline]
>        tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046

This is write().
Locks held on the path: termios_rwsem -> console_lock

> -> #0 (&tty->termios_rwsem){++++}:
>        down_write+0x57/0x140 kernel/locking/rwsem.c:1534
>        tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>        mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902
>        tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465
>        paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389
>        tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055
>        vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364

This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem

> other info that might help us debug this:
>
> Chain exists of:
>   &tty->termios_rwsem --> console_lock --> sel_lock

Clearly. From the above, we have:
 console_lock -> sel_lock
 sel_lock -> termios_rwsem
 termios_rwsem -> console_lock

Fix this by reversing the console_lock -> sel_lock dependency in
ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+26183d9746e62da329b8@syzkaller.appspotmail.com
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200228115406.5735-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, push console lock down

commit 4b70dd57a15d2f4685ac6e38056bad93e81e982f upstream.

We need to nest the console lock in sel_lock, so we have to push it down
a bit. Fortunately, the callers of set_selection_* just lock the console
lock around the function call. So moving it down is easy.

In the next patch, we switch the order.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200228115406.5735-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, close sel_buffer race

commit 07e6124a1a46b4b5a9b3cacc0c306b50da87abf5 upstream.

syzkaller reported this UAF:
BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184

CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
...
 kasan_report+0xe/0x20 mm/kasan/common.c:634
 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461
 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372
 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044
 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364
 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657
 vfs_ioctl fs/ioctl.c:47 [inline]

It is due to a race between parallel paste_selection (TIOCL_PASTESEL)
and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer,
while the other frees it and reallocates a new one for another
selection. Add a mutex to close this race.

The mutex takes care properly of sel_buffer and sel_buffer_lth only. The
other selection global variables (like sel_start, sel_end, and sel_cons)
are protected only in set_selection_user. The other functions need quite
some more work to close the races of the variables there. This is going
to happen later.

This likely fixes (I am unsure as there is no reproducer provided) bug
206361 too. It was marked as CVE-2020-8648.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+59997e8d5cbdc486e6f6@syzkaller.appspotmail.com
References: https://bugzilla.kernel.org/show_bug.cgi?id=206361
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210081131.23572-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_exar: add support for ACCES cards

commit 10c5ccc3c6d32f3d7d6c07de1d3f0f4b52f3e3ab upstream.

Add ACCES VIDs and PIDs that use the Exar chips

Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200305140504.22237-1-jay.dolan@accesio.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: fsl_lpuart: free IDs allocated by IDA

commit 2b2e71fe657510a6f71aa16ef0309fa6bc20ab3d upstream.

Since commit 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node
dependence") the port line number can also be allocated by IDA, but in
case of an error the ID will no be removed again. More importantly, any
ID will be freed in remove(), even if it wasn't allocated but instead
fetched by of_alias_get_id(). If it was not allocated by IDA there will
be a warning:
  WARN(1, "ida_free called for id=%d which is not allocated.\n", id);

Move the ID allocation more to the end of the probe() so that we still
can use plain return in the first error cases.

Fixes: 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence")
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200303174306.6015-3-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty:serial:mvebu-uart:fix a wrong return

commit 4a3e208474204e879d22a310b244cb2f39e5b1f8 upstream.

in this place, the function should return a
negative value and the PTR_ERR already returns
a negative,so return -PTR_ERR() is wrong.

Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200305013823.20976-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: dra76x: Fix mmc3 max-frequency

commit fa63c0039787b8fbacf4d6a51e3ff44288f5b90b upstream.

dra76x is not affected by i887 which requires mmc3 node to be limited to
a max frequency of 64 MHz. Fix this by overwriting the correct value in
the the dra76 specific dtsi.

Fixes: 895bd4b3e5ec ("ARM: dts: Add support for dra76-evm")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: socfpga: agilex: Fix gmac compatible

commit 8c867387160e89c9ffd12459f38e56844312a7a7 upstream.

Fix gmac compatible string to "altr,socfpga-stmmac-a10-s10". Gmac for
Agilex should use same compatible as Stratix 10.

Fixes: 4b36daf9ada3 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA")
Cc: stable@vger.kernel.org
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix RAID direct I/O reads with alternate csums

commit e7a04894c766daa4248cb736efee93550f2d5872 upstream.

btrfs_lookup_and_bind_dio_csum() does pointer arithmetic which assumes
32-bit checksums. If using a larger checksum, this leads to spurious
failures when a direct I/O read crosses a stripe. This is easy
to reproduce:

  # mkfs.btrfs -f --checksum blake2 -d raid0 /dev/vdc /dev/vdd
  ...
  # mount /dev/vdc /mnt
  # cd /mnt
  # dd if=/dev/urandom of=foo bs=1M count=1 status=none
  # dd if=foo of=/dev/null bs=1M iflag=direct status=none
  dd: error reading 'foo': Input/output error
  # dmesg | tail -1
  [  135.821568] BTRFS warning (device vdc): csum failed root 5 ino 257 off 421888 ...

Fix it by using the actual checksum size.

Fixes: 1e25a2e3ca0d ("btrfs: don't assume ordered sums to be 4 bytes")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fat: fix uninit-memory access for partial initialized inode

commit bc87302a093f0eab45cd4e250c2021299f712ec6 upstream.

When get an error in the middle of reading an inode, some fields in the
inode might be still not initialized.  And then the evict_inode path may
access those fields via iput().

To fix, this makes sure that inode fields are initialized.

Reported-by: syzbot+9d82b8de2992579da5d0@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/871rqnreqx.fsf@mail.parknet.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, hotplug: fix page online with DEBUG_PAGEALLOC compiled but not enabled

commit c87cbc1f007c4b46165f05ceca04e1973cda0b9c upstream.

Commit cd02cf1aceea ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC")
fixed memory hotplug with debug_pagealloc enabled, where onlining a page
goes through page freeing, which removes the direct mapping.  Some arches
don't like when the page is not mapped in the first place, so
generic_online_page() maps it first.  This is somewhat wasteful, but
better than special casing page freeing fast paths.

The commit however missed that DEBUG_PAGEALLOC configured doesn't mean
it's actually enabled.  One has to test debug_pagealloc_enabled() since
031bc5743f15 ("mm/debug-pagealloc: make debug-pagealloc boottime
configurable"), or alternatively debug_pagealloc_enabled_static() since
8e57f8acbbd1 ("mm, debug_pagealloc: don't rely on static keys too early"),
but this is not done.

As a result, a s390 kernel with DEBUG_PAGEALLOC configured but not enabled
will crash:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:0000001ece13400b R2:000003fff7fd000b R3:000003fff7fcc007 S:000003fff7fd7000 P:000000000000013d
Oops: 0004 ilc:2 [#1] SMP
CPU: 1 PID: 26015 Comm: chmem Kdump: loaded Tainted: GX 5.3.18-5-default #1 SLE15-SP2 (unreleased)
Krnl PSW : 0704e00180000000 0000001ecd281b9e (__kernel_map_pages+0x166/0x188)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000000 0000000000000800 0000400b00000000 0000000000000100
0000000000000001 0000000000000000 0000000000000002 0000000000000100
0000001ece139230 0000001ecdd98d40 0000400b00000100 0000000000000000
000003ffa17e4000 001fffe0114f7d08 0000001ecd4d93ea 001fffe0114f7b20
Krnl Code: 0000001ecd281b8e: ec17ffff00d8 ahik %r1,%r7,-1
0000001ecd281b94: ec111dbc0355 risbg %r1,%r1,29,188,3
>0000001ecd281b9e: 94fb5006 ni 6(%r5),251
0000001ecd281ba2: 41505008 la %r5,8(%r5)
0000001ecd281ba6: ec51fffc6064 cgrj %r5,%r1,6,1ecd281b9e
0000001ecd281bac: 1a07 ar %r0,%r7
0000001ecd281bae: ec03ff584076 crj %r0,%r3,4,1ecd281a5e
Call Trace:
[<0000001ecd281b9e>] __kernel_map_pages+0x166/0x188
[<0000001ecd4d9516>] online_pages_range+0xf6/0x128
[<0000001ecd2a8186>] walk_system_ram_range+0x7e/0xd8
[<0000001ecda28aae>] online_pages+0x2fe/0x3f0
[<0000001ecd7d02a6>] memory_subsys_online+0x8e/0xc0
[<0000001ecd7add42>] device_online+0x5a/0xc8
[<0000001ecd7d0430>] state_store+0x88/0x118
[<0000001ecd5b9f62>] kernfs_fop_write+0xc2/0x200
[<0000001ecd5064b6>] vfs_write+0x176/0x1e0
[<0000001ecd50676a>] ksys_write+0xa2/0x100
[<0000001ecda315d4>] system_call+0xd8/0x2c8

Fix this by checking debug_pagealloc_enabled_static() before calling
kernel_map_pages(). Backports for kernel before 5.5 should use
debug_pagealloc_enabled() instead. Also add comments.

Fixes: cd02cf1aceea ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC")
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200224094651.18257-1-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()

commit 8a8683ad9ba48b4b52a57f013513d1635c1ca5c4 upstream.

In set_pmd_migration_entry(), pmdp_invalidate() is used to change PMD
atomically.  But the PMD is read before that with an ordinary memory
reading.  If the THP (transparent huge page) is written between the PMD
reading and pmdp_invalidate(), the PMD dirty bit may be lost, and cause
data corruption.  The race window is quite small, but still possible in
theory, so need to be fixed.

The race is fixed via using the return value of pmdp_invalidate() to get
the original content of PMD, which is a read/modify/write atomic
operation.  So no THP writing can occur in between.

The race has been introduced when the THP migration support is added in
the commit 616b8371539a ("mm: thp: enable thp migration in generic path").
But this fix depends on the commit d52605d7cb30 ("mm: do not lose dirty
and accessed bits in pmdp_invalidate()").  So it's easy to be backported
after v4.16.  But the race window is really small, so it may be fine not
to backport the fix at all.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: http://lkml.kernel.org/r/20200220075220.2327056-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa

commit 8b272b3cbbb50a6a8e62d8a15affd473a788e184 upstream.

: A user reported a bug against a distribution kernel while running a
: proprietary workload described as "memory intensive that is not swapping"
: that is expected to apply to mainline kernels.  The workload is
: read/write/modifying ranges of memory and checking the contents.  They
: reported that within a few hours that a bad PMD would be reported followed
: by a memory corruption where expected data was all zeros.  A partial
: report of the bad PMD looked like
:
:   [ 5195.338482] ../mm/pgtable-generic.c:33: bad pmd ffff8888157ba008(000002e0396009e2)
:   [ 5195.341184] ------------[ cut here ]------------
:   [ 5195.356880] kernel BUG at ../mm/pgtable-generic.c:35!
:   ....
:   [ 5195.410033] Call Trace:
:   [ 5195.410471]  [<ffffffff811bc75d>] change_protection_range+0x7dd/0x930
:   [ 5195.410716]  [<ffffffff811d4be8>] change_prot_numa+0x18/0x30
:   [ 5195.410918]  [<ffffffff810adefe>] task_numa_work+0x1fe/0x310
:   [ 5195.411200]  [<ffffffff81098322>] task_work_run+0x72/0x90
:   [ 5195.411246]  [<ffffffff81077139>] exit_to_usermode_loop+0x91/0xc2
:   [ 5195.411494]  [<ffffffff81003a51>] prepare_exit_to_usermode+0x31/0x40
:   [ 5195.411739]  [<ffffffff815e56af>] retint_user+0x8/0x10
:
: Decoding revealed that the PMD was a valid prot_numa PMD and the bad PMD
: was a false detection.  The bug does not trigger if automatic NUMA
: balancing or transparent huge pages is disabled.
:
: The bug is due a race in change_pmd_range between a pmd_trans_huge and
: pmd_nond_or_clear_bad check without any locks held.  During the
: pmd_trans_huge check, a parallel protection update under lock can have
: cleared the PMD and filled it with a prot_numa entry between the transhuge
: check and the pmd_none_or_clear_bad check.
:
: While this could be fixed with heavy locking, it's only necessary to make
: a copy of the PMD on the stack during change_pmd_range and avoid races.  A
: new helper is created for this as the check if quite subtle and the
: existing similar helpful is not suitable.  This passed 154 hours of
: testing (usually triggers between 20 minutes and 24 hours) without
: detecting bad PMDs or corruption.  A basic test of an autonuma-intensive
: workload showed no significant change in behaviour.

Although Mel withdrew the patch on the face of LKML comment
https://lkml.org/lkml/2017/4/10/922 the race window aforementioned is
still open, and we have reports of Linpack test reporting bad residuals
after the bad PMD warning is observed.  In addition to that, bad
rss-counter and non-zero pgtables assertions are triggered on mm teardown
for the task hitting the bad PMD.

 host kernel: mm/pgtable-generic.c:40: bad pmd 00000000b3152f68(8000000d2d2008e7)
 ....
 host kernel: BUG: Bad rss-counter state mm:00000000b583043d idx:1 val:512
 host kernel: BUG: non-zero pgtables_bytes on freeing mm: 4096

The issue is observed on a v4.18-based distribution kernel, but the race
window is expected to be applicable to mainline kernels, as well.

[akpm@linux-foundation.org: fix comment typo, per Rafael]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200216191800.22423-1-aquini@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vgacon: Fix a UAF in vgacon_invert_region

commit 513dc792d6060d5ef572e43852683097a8420f56 upstream.

When syzkaller tests, there is a UAF:
  BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr
    ffff880000100000
  Read of size 2 by task syz-executor.1/16489
  page:ffffea0000004000 count:0 mapcount:-127 mapping:          (null)
  index:0x0
  page flags: 0xfffff00000000()
  page dumped because: kasan: bad access detected
  CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
  Call Trace:
    [<ffffffffb119f309>] dump_stack+0x1e/0x20
    [<ffffffffb04af957>] kasan_report+0x577/0x950
    [<ffffffffb04ae652>] __asan_load2+0x62/0x80
    [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110
    [<ffffffffb0a39d95>] invert_screen+0xe5/0x470
    [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0
    [<ffffffffb0a3bfae>] tioclinux+0xee/0x490
    [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670
    [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10
    [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40
    [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170
    [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27
    Memory state around the buggy address:
     ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00
     ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00 00
    >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff
     ff ff ff

It can be reproduce in the linux mainline by the program:
  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <sys/ioctl.h>
  #include <linux/vt.h>

  struct tiocl_selection {
    unsigned short xs;      /* X start */
    unsigned short ys;      /* Y start */
    unsigned short xe;      /* X end */
    unsigned short ye;      /* Y end */
    unsigned short sel_mode; /* selection mode */
  };

  #define TIOCL_SETSEL    2
  struct tiocl {
    unsigned char type;
    unsigned char pad;
    struct tiocl_selection sel;
  };

  int main()
  {
    int fd = 0;
    const char *dev = "/dev/char/4:1";

    struct vt_consize v = {0};
    struct tiocl tioc = {0};

    fd = open(dev, O_RDWR, 0);

    v.v_rows = 3346;
    ioctl(fd, VT_RESIZEX, &v);

    tioc.type = TIOCL_SETSEL;
    ioctl(fd, TIOCLINUX, &tioc);

    return 0;
  }

When resize the screen, update the 'vc->vc_size_row' to the new_row_size,
but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base'
for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe
smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc
the offset, it maybe larger than the vga_vram_size in vgacon driver, then
bad access.
Also, if set an larger screenbuf firstly, then set an more larger
screenbuf, when copy old_origin to new_origin, a bad access may happen.

So, If the screen size larger than vga_vram, resize screen should be
failed. This alse fix CVE-2020-8649 and CVE-2020-8647.

Linus pointed out that overflow checking seems absent. We're saved by
the existing bounds checks in vc_do_resize() with rather strict
limits:

if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
return -EINVAL;

Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix")
Reference: CVE-2020-8647 and CVE-2020-8649
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[danvet: augment commit message to point out overflow safety]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: port: do error out if usb_autopm_get_interface() fails

commit 1f8b39bc99a31759e97a0428a5c3f64802c1e61d upstream.

Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:

On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
 > A revised search finds line 997 in drivers/usb/core/hub.c and lines
 > 216, 269 in drivers/usb/core/port.c.  (I didn't try looking in any
 > other directories.)  AFAICT all three of these should check the
 > return value, although a error message in the kernel log probably
 > isn't needed.

Factor out the usb_port_runtime_{resume,suspend}() changes into a
standalone patch to allow conflict-free porting on top of stable v3.9+.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org

Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device")
Cc: stable@vger.kernel.org # v3.9+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: do error out if usb_autopm_get_interface() fails

commit 60e3f6e4ac5b0fda43dad01c32e09409ec710045 upstream.

Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:

On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
 > A revised search finds line 997 in drivers/usb/core/hub.c and lines
 > 216, 269 in drivers/usb/core/port.c.  (I didn't try looking in any
 > other directories.)  AFAICT all three of these should check the
 > return value, although a error message in the kernel log probably
 > isn't needed.

Factor out the usb_remove_device() change into a standalone patch to
allow conflict-free integration on top of the earliest stable branches.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org

Fixes: 253e05724f9230 ("USB: add a "remove hardware" sysfs attribute")
Cc: stable@vger.kernel.org # v2.6.33+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200226175036.14946-2-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: fix unhandled return by employing a void function

commit 63d6d7ed475c53dc1cabdfedf63de1fd8dcd72ee upstream.

Address below Coverity complaint (Feb 25, 2020, 8:06 AM CET):

usb: cdns3: gadget: toggle cycle bit before reset endpoint

commit 4bf2dd65135a2d7fe202f7c10d65b51bcf645ac6 upstream.

If there are TRBs pending during reset endpoint operation, the
DMA will advance after reset operation, but it isn't expected,
since the data is not yet available (For OUT, the data is not
yet available). After the data is ready, there won't be any
interrupt since the EP_TRADDR already points to next TRB entry
and doorbell is not set.

To fix it, it toggles cycle bit before reset operation, and restores
it after reset, it could avoid unexpected DMA advance due to
cycle bit is for software during the endpoint reset operation.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-3-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: gadget: link trb should point to next request

commit 8a7c47fb7285b23ca259c888016513d5566fa9e8 upstream.

It has marked the dequeue trb as link trb, but its next segment
pointer is still itself, it causes the transfer can't go on. Fix
it by set its pointer as the trb address for the next request.

Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-2-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Update chain bit correctly when using sg list

commit dad2aff3e827b112f27fa5e6f2bf87a110067c3f upstream.

If scatter-gather operation is allowed, a large USB request is split
into multiple TRBs. For preparing TRBs for sg list, driver iterates
over the list and creates TRB for each sg and mark the chain bit to
false for the last sg. The current IOMMU driver is clubbing the list
of sgs which shares a page boundary into one and giving it to USB driver.
With this the number of sgs mapped it not equal to the the number of sgs
passed. Because of this USB driver is not marking the chain bit to false
since it couldn't iterate to the last sg. This patch addresses this issue
by marking the chain bit to false if it is the last mapped sg.

At a practical level, this patch resolves USB transfer stalls
seen with adb on dwc3 based db845c, pixel3 and other qcom
hardware after functionfs gadget added scatter-gather support
around v4.20.

Credit also to Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
who implemented a very similar fix to this issue.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Cc: stable <stable@vger.kernel.org> #4.20+
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
[jstultz: Slight tweak to remove sg_is_last() usage, reworked
          commit message, minor comment tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200302214443.55783-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add NO_LPM quirk for Logitech Screen Share

commit b96ed52d781a2026d0c0daa5787c6f3d45415862 upstream.

LPM on the device appears to cause xHCI host controllers to claim
that there isn't enough bandwidth to support additional devices.

Signed-off-by: Dan Lazewatsky <dlaz@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://lore.kernel.org/r/20200226143438.1445-1-gustavo.padovan@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: storage: Add quirk for Samsung Fit flash

commit 86d92f5465958752481269348d474414dccb1552 upstream.

Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors,
e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors

If data access times out, driver error handling will issue a port
reset.
Sometimes Samsung Fit (090C:1000) flash disk will not respond to
later Set Address or Get Descriptor command.

Adding this quirk to limit max_sectors to 64 sectors to avoid issue
occurring.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1583158895-31342-1-git-send-email-jilin@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix rename() by ensuring source handle opened with DELETE bit

commit 86f740f2aed5ea7fe1aa86dc2df0fb4ab0f71088 upstream.

To rename a file in SMB2 we open it with the DELETE access and do a
special SetInfo on it. If the handle is missing the DELETE bit the
server will fail the SetInfo with STATUS_ACCESS_DENIED.

We currently try to reuse any existing opened handle we have with
cifs_get_writable_path(). That function looks for handles with WRITE
access but doesn't check for DELETE, making rename() fail if it finds
a handle to reuse. Simple reproducer below.

To select handles with the DELETE bit, this patch adds a flag argument
to cifs_get_writable_path() and find_writable_file() and the existing
'bool fsuid_only' argument is converted to a flag.

The cifsFileInfo struct only stores the UNIX open mode but not the
original SMB access flags. Since the DELETE bit is not mapped in that
mode, this patch stores the access mask in cifs_fid on file open,
which is accessible from cifsFileInfo.

Simple reproducer:

#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define E(s) perror(s), exit(1)

int main(int argc, char *argv[])
{
int fd, ret;
if (argc != 3) {
fprintf(stderr, "Usage: %s A B\n"
"create&open A in write mode, "
"rename A to B, close A\n", argv[0]);
return 0;
}

fd = openat(AT_FDCWD, argv[1], O_WRONLY|O_CREAT|O_SYNC, 0666);
if (fd == -1) E("openat()");

ret = rename(argv[1], argv[2]);
if (ret) E("rename()");

ret = close(fd);
if (ret) E("close()");

return ret;
}

$ gcc -o bugrename bugrename.c
$ ./bugrename /mnt/a /mnt/b
rename(): Permission denied

Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: don't leak -EAGAIN for stat() during reconnect

commit fc513fac56e1b626ae48a74d7551d9c35c50129e upstream.

If from cifs_revalidate_dentry_attr() the SMB2/QUERY_INFO call fails with an
error, such as STATUS_SESSION_EXPIRED, causing the session to be reconnected
it is possible we will leak -EAGAIN back to the application even for
system calls such as stat() where this is not a valid error.

Fix this by re-trying the operation from within cifs_revalidate_dentry_attr()
if cifs_get_inode_info*() returns -EAGAIN.

This fixes stat() and possibly also other system calls that uses
cifs_revalidate_dentry*().

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294

commit 8b33a134a9cc2a501f8fc731d91caef39237d495 upstream.

A headset on the laptop like ASUS B9450FA does not work, until quirk
ALC294_FIXUP_ASUS_HPE is applied.

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200225072920.109199-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master

commit 0d45e86d2267d5bdf7bbb631499788da1c27ceb2 upstream.

The Gigabyte X570 Aorus Master motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200223092416.15016-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1

commit 76f7dec08fd64e9e3ad0810a1a8a60b0a846d348 upstream.

ThinkPad want to support Headset Button control.
This patch will enable it.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7f0b7128f40f41f6b5582ff610adc33d@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add Headset Mic supported

commit 78def224f59c05d00e815be946ec229719ccf377 upstream.

Dell desktop platform supported headset Mic.
Add pin verb to enable headset Mic.
This platform only support fixed type headset for Iphone type.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b9da28d772ef43088791b0f3675929e7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: prevent UAF for binderfs devices II

commit f0fe2c0f050d31babcad7d65f1d550d462a40064 upstream.

This is a necessary follow up to the first fix I proposed and we merged
in 2669b8b0c79 ("binder: prevent UAF for binderfs devices"). I have been
overly optimistic that the simple fix I proposed would work. But alas,
ihold() + iput() won't work since the inodes won't survive the
destruction of the superblock.
So all we get with my prior fix is a different race with a tinier
race-window but it doesn't solve the issue. Fwiw, the problem lies with
generic_shutdown_super(). It even has this cozy Al-style comment:

          if (!list_empty(&sb->s_inodes)) {
                  printk("VFS: Busy inodes after unmount of %s. "
                     "Self-destruct in 5 seconds.  Have a nice day...\n",
                     sb->s_id);
          }

On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is
called which punts the actual cleanup operation to a workqueue. At some
point, binder_deferred_func() will be called which will end up calling
binder_deferred_release() which will retrieve and cleanup the
binder_context attach to this struct binder_proc.

If we trace back where this binder_context is attached to binder_proc we
see that it is set in binder_open() and is taken from the struct
binder_device it is associated with. This obviously assumes that the
struct binder_device that context is attached to is _never_ freed. While
that might be true for devtmpfs binder devices it is most certainly
wrong for binderfs binder devices.

So, assume binder_open() is called on a binderfs binder devices. We now
stash away the struct binder_context associated with that struct
binder_devices:
proc->context = &binder_dev->context;
/* binderfs stashes devices in i_private */
if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
info = nodp->i_sb->s_fs_info;
binder_binderfs_dir_entry_proc = info->proc_log_dir;
} else {
.
.
.
proc->context = &binder_dev->context;

Now let's assume that the binderfs instance for that binder devices is
shutdown via umount() and/or the mount namespace associated with it goes
away. As long as there is still an fd open for that binderfs binder
device things are fine. But let's assume we now close the last fd for
that binderfs binder device. Now binder_release() is called and punts to
the workqueue. Assume that the workqueue has quite a bit of stuff to do
and doesn't get to cleaning up the struct binder_proc and the associated
struct binder_context with it for that binderfs binder device right
away. In the meantime, the VFS is killing the super block and is
ultimately calling sb->evict_inode() which means it will call
binderfs_evict_inode() which does:

static void binderfs_evict_inode(struct inode *inode)
{
struct binder_device *device = inode->i_private;
struct binderfs_info *info = BINDERFS_I(inode);

clear_inode(inode);

if (!S_ISCHR(inode->i_mode) || !device)
return;

mutex_lock(&binderfs_minors_mutex);
--info->device_count;
ida_free(&binderfs_minors, device->miscdev.minor);
mutex_unlock(&binderfs_minors_mutex);

kfree(device->context.name);
kfree(device);
}

thereby freeing the struct binder_device including struct
binder_context.

Now the workqueue finally has time to get around to cleaning up struct
binder_proc and is now trying to access the associate struct
binder_context. Since it's already freed it will OOPs.

Fix this by introducing a refounct on binder devices.

This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in
print_binder_transaction_log_entry()").

Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Fixes: 2669b8b0c798 ("binder: prevent UAF for binderfs devices")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20200303164340.670054-1-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: prevent UAF for binderfs devices

commit 2669b8b0c798fbe1a31d49e07aa33233d469ad9b upstream.

On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is
called which punts the actual cleanup operation to a workqueue. At some
point, binder_deferred_func() will be called which will end up calling
binder_deferred_release() which will retrieve and cleanup the
binder_context attach to this struct binder_proc.

If we trace back where this binder_context is attached to binder_proc we
see that it is set in binder_open() and is taken from the struct
binder_device it is associated with. This obviously assumes that the
struct binder_device that context is attached to is _never_ freed. While
that might be true for devtmpfs binder devices it is most certainly
wrong for binderfs binder devices.

So, assume binder_open() is called on a binderfs binder devices. We now
stash away the struct binder_context associated with that struct
binder_devices:
proc->context = &binder_dev->context;
/* binderfs stashes devices in i_private */
if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
info = nodp->i_sb->s_fs_info;
binder_binderfs_dir_entry_proc = info->proc_log_dir;
} else {
.
.
.
proc->context = &binder_dev->context;

Now let's assume that the binderfs instance for that binder devices is
shutdown via umount() and/or the mount namespace associated with it goes
away. As long as there is still an fd open for that binderfs binder
device things are fine. But let's assume we now close the last fd for
that binderfs binder device. Now binder_release() is called and punts to
the workqueue. Assume that the workqueue has quite a bit of stuff to do
and doesn't get to cleaning up the struct binder_proc and the associated
struct binder_context with it for that binderfs binder device right
away. In the meantime, the VFS is killing the super block and is
ultimately calling sb->evict_inode() which means it will call
binderfs_evict_inode() which does:

static void binderfs_evict_inode(struct inode *inode)
{
struct binder_device *device = inode->i_private;
struct binderfs_info *info = BINDERFS_I(inode);

clear_inode(inode);

if (!S_ISCHR(inode->i_mode) || !device)
return;

mutex_lock(&binderfs_minors_mutex);
--info->device_count;
ida_free(&binderfs_minors, device->miscdev.minor);
mutex_unlock(&binderfs_minors_mutex);

kfree(device->context.name);
kfree(device);
}

thereby freeing the struct binder_device including struct
binder_context.

Now the workqueue finally has time to get around to cleaning up struct
binder_proc and is now trying to access the associate struct
binder_context. Since it's already freed it will OOPs.

Fix this by holding an additional reference to the inode that is only
released once the workqueue is done cleaning up struct binder_proc. This
is an easy alternative to introducing separate refcounting on struct
binder_device which we can always do later if it becomes necessary.

This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in
print_binder_transaction_log_entry()").

Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: imx: scu: Ensure sequential TX

commit 26d0fba29c96241de8a9d16f045b1de49875884c upstream.

SCU requires that all messages words are written sequentially but linux MU
driver implements multiple independent channels for each register so ordering
between different channels must be ensured by SCU API interface.

Wait for tx_done before every send to ensure that no queueing happens at the
mailbox channel level.

Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by:: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: forwarding: vxlan_bridge_1d: use more proper tos value

[ Upstream commit 9b64208f74fbd0e920475ecfe9326f8443fdc3a5 ]

0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.

Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/csky: fix some Kconfig typos

[ Upstream commit bebd26ab623616728d6e72b5c74a47bfff5287d8 ]

Fix wording in help text for the CPU_HAS_LDSTEX symbol.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup compile warning for three unimplemented syscalls

[ Upstream commit 2305f60b76110cb3e8658a4ae85d1f7eb0c66a5b ]

Implement fstat64, fstatat64, clone3 syscalls to fixup
checksyscalls.sh compile warnings.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup ftrace modify panic

[ Upstream commit 359ae00d12589c31cf103894d0f32588d523ca83 ]

During ftrace init, linux will replace all function prologues
(call_mcout) with nops, but it need flush_dcache and
invalidate_icache to make it work. So flush_cache functions
couldn't be nested called by ftrace framework.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky/smp: Fixup boot failed when CONFIG_SMP

[ Upstream commit c9492737b25ca32679ba3163609d938c9abfd508 ]

If we use a non-ipi-support interrupt controller, it will cause panic here.
We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Set regs->usp to kernel sp, when the exception is from kernel

[ Upstream commit f8e17c17b81070f38062dce79ca7f4541851dadd ]

In the past, we didn't care about kernel sp when saving pt_reg. But in some
cases, we still need pt_reg->usp to represent the kernel stack before enter
exception.

For cmpxhg in atomic.S, we need save and restore usp for above.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky/mm: Fixup export invalid_pte_table symbol

[ Upstream commit 7f4a567332f035ab16b29010fbd04a0f10183c77 ]

There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table
for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need
invalid_pte_talbe to get result. If a module use these functions, we need export the
symbol for it.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Mo Qihui <qihui.mo@verisilicon.com>
Cc: Zhange Jian <zhang_jian5@dahuatech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: thunderx: workaround BGX TX Underflow issue

[ Upstream commit 971617c3b761c876d686a2188220a33898c90e99 ]

While it is not yet understood why a TX underflow can easily occur
for SGMII interfaces resulting in a TX wedge. It has been found that
disabling/re-enabling the LMAC resolves the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: Distribute switch variables for initialization

[ Upstream commit 9038ec99ceb94fb8d93ade5e236b2928f0792c7c ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’:
arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable]
  904 |   unsigned which;
      |            ^~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200220062318.69299-1-keescook@chromium.org
Reviewed-by: Juergen Gross <jgross@suse.com>
[boris: made @which an 'unsigned int']
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Don't tell the OS that link is going down

[ Upstream commit 8a55c08d3bbc9ffc9639f69f742e59ebd99f913b ]

Remove code that tell the OS that link is going down when user
change flow control via ethtool. When link is up it isn't certain
that link goes down after 0x0605 aq command. If link doesn't go
down, OS thinks that link is down, but physical link is up. To
reset this state user have to take interface down and up.

If link goes down after 0x0605 command, FW send information
about that and after that driver tells the OS that the link goes
down. So this code in ethtool is unnecessary.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: Fix uninitialized-variable warning

[ Upstream commit 15755854d53b4bbb0bb37a0fce66f0156cfc8a17 ]

gcc may detect a false positive on nvme using an unintialized variable
if setting features fails. Since this is not a fast path, explicitly
initialize this variable to suppress the warning.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qdio: fill SL with absolute addresses

[ Upstream commit e9091ffd6a0aaced111b5d6ead5eaab5cd7101bc ]

As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.

Handle this properly in the code that actually builds the SL.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/boot/compressed: Don't declare __force_order in kaslr_64.c

[ Upstream commit df6d4f9db79c1a5d6f48b59db35ccd1e9ff9adfc ]

GCC 10 changed the default to -fno-common, which leads to

    LD      arch/x86/boot/compressed/vmlinux
  ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \
    arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
  make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1

Since __force_order is already provided in pgtable_64.c, there is no
need to declare __force_order in kaslr_64.c.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200124181811.4780-1-hjl.tools@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: Use single IRQ vector for old Apple models

[ Upstream commit 98f7b86a0becc1154b1a6df6e75c9695dfd87e0d ]

People reported that old Apple machines are not working properly
if the non-first IRQ vector is in use.

Set quirk for that models to limit IRQ to use first vector only.

Based on original patch by GitHub user npx001.

Link: https://github.com/Dunedan/mbp-2016-linux/issues/9
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme/pci: Add sleep quirk for Samsung and Toshiba drives

[ Upstream commit 1fae37accfc5872af3905d4ba71dc6ab15829be7 ]

The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo
C640 platform experience runtime resume issues when the SSDs are kept in
sleep/suspend mode for long time.

This patch applies the 'Simple Suspend' quirk to these configurations.
With this patch, the issue had not been observed in a 1+ day test.

Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shyjumon N <shyjumon.n@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>