staging: comedi: addi_apci_3120: DMA requires an interrupt

An interrupt is required for DMA to work.

Factor out the DMA buffer allocation from the (*auto_attach) and only
allocate the buffers if the interrupt is available.

For aesthetics, also factor the DMA buffer free from the (*detach).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: remove deadcode in ni_65xx_intr_cmdtest()

Reported-by: coverity (CID 142963)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_6527: remove deadcode in ni6527_intr_cmdtest()

Reported-by: coverity (CID 142962)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove deadcode in ni_cdio_cmdtest()

Reported-by: coverity (CID 142967)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: remove driver

According to ADDI-DATA, this board was discontinued last year and they
feel that no further development is needed for this driver. Remove the
driver from comedi to help with the addi-data cleanup.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: introduce usbduxsigma_ai_handle_urb()

Factor the urb handling and resubmit out of the analog input urb
completion handler and tidy it up. This allows a common exit path
to be used in the completion handler to stop the async command and
handle the events.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: introduce usbduxsigma_ao_handle_urb()

Factor the urb handling and resubmit out of the analog output urb
completion handler and tidy it up. This allows a common exit path
to be used in the completion handler to stop the async command and
handle the events.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: introduce usbduxfast_ai_handle_urb()

Factor the urb handling and resubmit out of the completion handler and
tidy it up. This allows a common exit path to be used in the completion
handler to stop the async command and handle the events.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: introduce usbduxsub_ai_handle_urb()

Factor the urb handling and resubmit out of the analog input urb
completion handler and tidy it up. This allows a common exit path
to be used in the completion handler to stop the async command and
handle the events.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: introduce usbduxsub_ao_handle_urb()

Factor the urb handling and resubmit out of the analog output urb
completion handler and tidy it up. This allows a common exit path
to be used in the completion handler to stop the async command and
handle the events.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove file

This header is no longer included by any of the addi-data drivers.
Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: separate from addi_common.h

Remove the need to include addi_common.h by introducing a new private
data definition. Only include the members that are actually used by
the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: separate from addi_common.h

Remove the need to include addi_common.h by introducing a new private
data definition. Only include the members that are actually used by
the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: separate from addi_common.h

Remove the need to include addi_common.h by introducing a new private
data definition. Only include the members that are actually used by
the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: simplify analog input boardinfo

There are two boards supported by this driver. One with 16-bit analog
inputs and the other 12-bit analog inputs.

Add a bit field flag, 'ai_is_16bit', to the boardinfo and remove the
'i_AiMaxdata' member. Use the new flag to initialize tne analog input
subdevice maxdata correctly.

For aesthetics, adjust the whitespace in the boardinfo declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: simplify analog output boardinfo

There are two boards supported by this driver. One with eight 14-bit analog
outputs and the other without analog outputs.

Add a bit field flag, 'has_ao', to the boardinfo and remove the 'i_NbrAoChannel'
and 'i_AoMaxdata' members. Use the new flag to determine if the analog output
subdevice needs to be initialized and open code the n_chan and maxdata.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: remove boardinfo 'i_AiChannelList'

All boardinfo entries have this member set as '16'. This is also the Analog
Input 'n_chan'. For aesthetics, initialize the Analog Input 'len_chanlist'
with s->n_chan and remove the boardinfo member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: remove boardinfo 'i_NbrAiChannel'

All boardinfo entries have this member set as '16'. This will initialize
the Analog Input 'n_chan' and cause the 'i_NbrAiChannelDiff' member to
never get used. Remove both members and initialize the Analog Input 'n_chan'
with 16 directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: remove boardinfo 'i_NbrDiChannel'

All boardinfo entries have this member set as '4'. Remove the member and
initialize the Digial Input 'n_chan' with 4 directly.

Also, remove the initialization of 'len_chanlist'. This member is only
used with subdevices that support async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: remove boardinfo 'i_NbrDoChannel'

All boardinfo entries have this member set as '4'. Remove the member and
initialize the Digial Output 'n_chan' with 4 directly.

Also, remove the initialization of 'len_chanlist'. This member is only
used with subdevices that support async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: remove boardinfo 'i_DoMaxdata'

The maxdata for a Digital Output subdevice is always '1'. Remove this
incorrect boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove unused members from addi_private

Remove all the unused members from the addi_private definition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove boardinfo definition

The addi_board definition is not only used by the addi_apci_3120 driver.

Introduce a private definition in that driver and remove the global definition
from addi_common.h.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: remove need for boardinfo access

The apci3120_ai_insn_config() function is broken in this driver. It does
not follow the comedi API and will fail to work correctly.

For now just remove the need for the boardinfo access to allow additional
cleanup. The 'i_NbrAiChannel' is actually the subdevice 'n_chan' use that
instead and remove the boardinfo access.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_eeprom: remove source file

This source file is no longer included by any of the addi-data drivers.
Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: remove boardinfo

The hardware has an eeprom but the boardinfo properly defines the subdevice
support so reading the eeprom and setting the 's_EeParameters' use is not
necessary. Since the boardinfo only has one entry its not really necessary.
Also, providing a subdevice the read the eeprom is not really interesting.

Remove the eeprom support code along with the boardinfo and initialize the
subdevices directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: remove boardinfo

The hardware does not have an eeprom so the 's_EeParameters' use is not
necessary. Remove it.

Since the boardinfo only has one entry its not really necessary. Remove
it and initialize the subdevices directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove boardinfo member 'i_PCIEeprom'

This member of the boardinfo is not used by any of the drivers. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: board has eeprom

As indicated in the boardinfo, the hardware has an eeprom. Simplify
the board attach code and remove the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: remove eeprom support

As indicated in the boardinfo, the hardware does not have an eeprom. Remove
the subdevice and support code for it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove boardinfo 'i_IorangeBase1'

This member of the boardinfo is used as a flag to determine what PCI BAR
to use for the main 'iobase' used by the driver.

Remove the boardinfo member and refactor the (*auto_attach) of the drivers
to use the correct PCI BAR.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: rename boardinfo 'pc_DriverName'

Rename this CamelCase member of the boardinfo.

The comedi_device 'board_name' is set to this member during the (*auto_attach)
of the addi-data that still use this boardinfo drivers. For aesthetics, use
the dev->board_name instead of the boardinfo in the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: remove unused subdevices

Only allocate space for the subdevicess used by the driver. Remove all
the COMEDI_SUBD_UNUSED subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: remove unnecessary subdevice initialization

The subdevices that don't initialize any of the callbacks don't really
exist. Remove the unnecessary initialzation and just set the type to
COMEDI_SUBD_UNUSED.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: remove unused subdevices

Only allocate space for the subdevicess used by the driver. Remove all
the COMEDI_SUBD_UNUSED subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: remove unnecessary subdevice initialization

The subdevices that don't initialize any of the callbacks don't really
exist. Remove the unnecessary initialzation and just set the type to
COMEDI_SUBD_UNUSED.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove subdevice callbacks from struct addi_board

None of the drivers that still include this header use the subdevice callbacks.
Remove all of them to reduce the bloat.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: remove subdevice callbacks from boardinfo

This driver only has one boardinfo entry so the subdevice callbacks are
always the same. Remvoe the callbacks from the boardinfo and use them
directly when initializing the subdevices.

Remove all the subdevice callback initialization that would be set to
NULL.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_035: remove subdevice callbacks from boardinfo

This driver only has one boardinfo entry so the subdevice callbacks are
always the same. Remvoe the callbacks from the boardinfo and use them
directly when initializing the subdevices.

Remove all the subdevice callback initialization that would be set to
NULL.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.c: remove included source file

The addi_apci_035 and addi_apci_1500 are the only drivers left that
include this source file. Copy the i_ADDIDATA_InsnReadEeprom() function
from that file to those drivers and remove the addi_common.c file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.c: remove v_ADDI_Interrupt()

The addi_apci_035 and addi_apci_1500 are the only drivers left that use
this function in addi_common.c. The function simply calls the 'interrupt'
function that is in the boardinfo of the driver. Both drivers use the
same 'interrupt' function for all boardnfo entries.

Remove the i_ADDI_Reset() function as well as the 'interrupt' boardinfo
and use the 'interrupt' function directly when doing the request_irq().

In addition, the addi_apci_3120 driver has a private v_ADDI_Interrupt()
function that is doing the same thing. Remove that one as well.

Fix the return type of 'interrupt' functions in the drivers and add the
return vaules.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.c: remove addi_auto_attach()

The addi_apci_035 and addi_apci_1500 are the only drivers left that use
this function in addi_common.c. The addi_common code adds a lot of bloat
to the drivers.

Copy the addi_auto_attach() code to the (*auto_attach) functions of the
drivers and remove the function. This will help with removing the bloat.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.c: remove i_ADDI_Reset()

The addi_apci_035 and addi_apci_1500 are the only drivers left that use
this function in addi_common.c. The function simply calls the 'reset'
function that is in the boardinfo of the driver. Both drivers use the
same 'reset' function for all boardnfo entries.

Remove the i_ADDI_Reset() function as well as the 'reset' boardinfo and
just call the 'reset' function directly.

The i_ADDI_Reset() is called by addi_auto_attach() in addi_common.c after
a sucessful attach. Modify the (*auto_attach) in the drivers to call the
'reset' function directly and remove it from addi_auto_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.c: remove i_ADDI_Detach()

The addi_apci_035 and addi_apci_1500 are the only drivers left that use
this function in addi_common.c. Remove the function an add a private
comedi_driver (*detach) function to those drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3200: remove driver

This driver has some serious bitrot. In addition, it's not in the Kconfig
or Makefile so it can't even be built.

Just remove it. It would be easier to rewrite the driver than fix it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: clarify async->event error/cancel detection

Introduce COMEDI_CB_ERROR_MASK and COMEDI_CB_CANCEL_MASK to clarify the
async->events that indicate errors and cancel an async command.

Use the new defines to tidy up and clarify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: don't expose COMEDI_CB_* defines to userspace

The COMEDI_CB_* defines are the comedi_async "events" that the drivers set
to let the core detect the state of running async commands. These "events"
are only relevant to the kernel modules and should not be exposed to
userspace in the comedi.h user API header.

Move the defines to comedidev.h to avoid exposing them. For aesthetics,
convert the defines to bit shifts to better indicate that they are bitmask
values. Cleanup the documentation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: comedi_bond.c: Changed from using strncat to strlcat

Changed from using strncat to strlcat to simplify the code

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: updated address details

Updated the range of years, e-mail and added driver desription as
usually done in comedi.

Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: add support for PCIe-DAS1602/16

The Measurement Computing PCIe-DAS1602/16 is a PCI-Express version of
the PCIM-DAS1602/16, but has a different PCI device ID.  Add support
for this device and update the driver description, Kconfig description
and MODULE_DESCRIPTION.

Thanks to Christoph Langbein for supplying the PCI device ID.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: updated contact details / comments

I've updated my contact details and removed obsolete comments.

Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: update driver comment

The Comedi driver comment mentions a couple of manual configuration
options, but manual configuration via the COMEDI_DEVCONFIG ioctl and
comedi "attach" handler is no longer supported by this driver.  Update
the comment appropriately.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: updated contact details and status

I've updated my contact details of the driver. I've also tested it
thoroughly and it works perfectly. I've changed the status to stable.

Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: use preferred block comment style

Use the preferred block comment style for the copyright and Comedi
driver description header comments.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: media: dm365_isif: Add blank line after variable declarations

WARNING: Missing a blank line after declarations

Signed-off-by: anuvazhayil <anuv.1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: libcfs_cpu: Fix ERROR: do not initialise globals to 0 or NULL

Fixed the ERROR: do not initialise globals to 0 or NULL

Signed-off-by: anuvazhayil <anuv.1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: rtw_cmd: Fix space prohibited between function name and open parenthesis

Fixed the checkpatch.pl  WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: anuvazhayil <anuv.1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_bt829.c: replace dprintk by dev_dbg

This patch removes the custom printk macro dprintk and replaces all
the calls made to it by dev_dbg.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_imon.c: replace printk by dev_dbg

This patch replaces the calls to printk by dev_dbg.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_sir.c: use pr_debug and dev_dbg instead of dprintk

This patch removes the custom printk macro dprintk and replaces most of
the calls made to it by dev_dbg. pr_debug was used when the calling
function did not provide the appropiate device variable.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_zilog.c: replace custom print macros with dev_* and pr_*

This patch removes the custom printk macros dprintk, zilog_notify,
zilog_error, and zilog_info. All the calls to these macros were
replaced by dev_dbg, dev_notice, dev_err, and dev_info respectively
whenever possible. There were cases in which pr_debug, pr_notice,
pr_err and pr_info were used. It was when the calling function did
not provide an appropiate dev variable.

Applying this patch will trigger the out of memory checkpatch warning
for two lines. It will be fixed in a separate patch.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: Remove curly braces for single statement blocks

This patch removes curly braces for single statement
blocks using following coccinelle script:

@@
expression e1;
@@

- if (e1) {
+ if (e1)
        return ...;
- }

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: nio_tiocmd: fixed a brace coding style issue.

Removed unnecessary braces using checkpatch.pl tool

Signed-off-by: Surya Seetharaman <suryaseetharaman.9@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Use unsigned for loop index

The following semantic patch is used to do this

@r exists@ // find anything that might decrement the variable
identifier i;
expression E;
position p;
@@

  int i@p;
  ...
(
  &i
|
  i--
|
  --i
|
  i-=E
|
  i+=E
)

@x disable decl_init@
identifier r.i;
expression E;
position p1 != r.p;
@@

(
  volatile int i = 0;
|
  volatile int i;
|
+ unsigned
  int i@p1 = 0;
|
+ unsigned
  int i@p1;
)
  <... when != i = E
(
  i = 0
|
  i = 1
)
  ...>

Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Fix incorrect type in assignments

This patch fixes following sparse warnings:
drivers/staging/ozwpan/ozhcd.c:1917:35: warning: incorrect type in
assignment (different base types)
drivers/staging/ozwpan/ozhcd.c:1917:35:    expected restricted __le16
[usertype] wHubCharacteristics
drivers/staging/ozwpan/ozhcd.c:1917:35:    got unsigned short [unsigned]
[usertype] <noident>

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Replace timeval with timespec64

'timeval' is used to print timestamps in seconds and millisecond.

32-bit systems using 'struct timeval' will break in the year 2038,
So we have to replace that code with more appropriate types.

This patch changes the android driver to use timespec64.
Since this is a staging driver and the output is only used for a
debugfs file, it is fine to slightly change the output and
use nanoseconds instead. ktime_to_timespec64, is used which will return
seconds and nanoseconds.

Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: dgnc_kcompat.h: remove unused macro

This patch removes the macro PARM_INT after removing all the variables
that depended on it.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove debug symbols

This patch removes all of the debug symbols and the variable dgnc_debug
since they are not used anywhere in the code.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove unused variable named rawreadok

This patch removes the variable rawreadok since it is only intialized
but not used in any of the driver functions.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: dgnc_driver: remove all occurences of trcbuf_size

This patch removes the variable trcbuf_size given there is no real
use for it anymore. All of the debug variables in this driver is
basically dead code.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: dgnc_kcompat.h: remove unused macros

This patch removes the macros PARM_STR and PARM_ULONG given that they
are not used anywhere in the driver files.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: iwctl.c: Comments fixes

Replace C99 "//" comments by "/* */", remove comments about
adding code, remove commented code (one left there for
debugging of the function)

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: iocmd.h: Replace C99 // comments by /* */

Replace C99 "//" comments by "/* */"

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: iowpa.h: Replace C99 // comments by /* */

Replace C99 "//" comments by "/* */"

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: ioctl.h: Replace C99 // comment by /* */

Replace C99 "//" comment by "/* */"

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: IEEE11h.h: Replace C99 // comment by /* */

Replace C99 "//" comment by "/* */"

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: channel.c: Comments fixes

Replace C99 "//" comments by "/* */", remove not needed
comments about adding code

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: bssdb.h: Replace C99 // comments by /* */

Replace C99 "//" comments by "/* */"

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: desc.h: Comments fixes

Replace C99 "//" comments by "/* */", remove blank
commented lines

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dpc.c: Comment fixes

Replace C99 "//" comments by "/* */", remove not
needed comments about adding code

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dpc.h: Replace C99 // comment by /* */

Replace C99 "//" comment by "/* */"

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: card.c: Comments fixes

Replace C99 "//" comments by "/* */", remove not needed
comments (year of adding code, commented code)

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device.h: Comments fixes

Replace C99 "//" comments by "/* */", remove not
needed comments (year of adding code, commented code)

Signed-off-by: Veronika Kabatova <veronicca114@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5028: rtsx_transport.c: fixed a brace coding style issue.

Removed unwanted braces using checkpatch.pl tool.

Signed-off-by: Surya Seetharaman <suryaseetharaman.9@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5208: Removed unnecessary parentheses

Unnecessary parentheses around the right hand side of an assignment
is removed using the following semantic patch:

@@
identifier x,f;
constant C;
@@
(
-x = (f / C );
+x = f / C ;
|
-x = (f % C );
+x = f % C ;
)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: Removed unnecessary parentheses

Unnecessary parentheses around the right hand side of an assignment
is removed using the following semantic patch:

@@
identifier x,f;
constant C;
@@
(
-x = (f / C );
+x = f / C ;
|
-x = (f % C );
+x = f % C ;
)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: ft1000-usb: Removed unnecessary parentheses

Unnecessary parentheses around the right hand side of an assignment
is removed using the following semantic patch:

@@
identifier x,f;
constant C;
@@
(
-x = (f / C );
+x = f / C ;
|
-x = (f % C );
+x = f % C ;
)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: light: Removed unnecessary parentheses

Unnecessary parentheses around the right hand side of an assignment
is removed using the following semantic patch:

@@
identifier x,f;
constant C;
@@
(
-x = (f / C );
+x = f / C ;
|
-x = (f % C );
+x = f % C ;
)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Annotate association types with proper endianness

This patch fixes following sparse warning at number of places in
file rtl819x_BAProc.c.

Warning: incorrect type in assignment (different base types)
         expected unsigned short [unsigned] [usertype] tmp
         got restricted __le16 [usertype] <noident>

Here, code before this change is correct. But this change silents
sparse warnings and will not harm code too.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: delete successive assignments to the same location

Successive assignments to the same location is meaningless and can be
deleted. The Coccinelle semantic patch was used to find cases.

@@
expression e1,e2,e3;
@@

(
 (<+...e1++...+>)=e2;
|
 (<+...e1--...+>)=e2;
|
 (<+...++e1...+>)=e2;
|
 (<+...--e1...+>)=e2;
|
e1=e2;
e1 = <+...e1...+>;
|
*e1=e2;
*e1=e3;
)

Signed-off-by: Jiayi Ye <yejiayily@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: delete successive assignments to the same location

Successive assignments to the same location is meaningless and can be
deleted. The Coccinelle semantic patch was used to find cases.

@@
expression e1,e2,e3;
@@

(
 (<+...e1++...+>)=e2;
|
 (<+...e1--...+>)=e2;
|
 (<+...++e1...+>)=e2;
|
 (<+...--e1...+>)=e2;
|
e1=e2;
e1 = <+...e1...+>;
|
*e1=e2;
*e1=e3;
)

Signed-off-by: Jiayi Ye <yejiayily@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Place a space after a semi colon.

Removes the following errors generated using checkpatch.pl tool:
drivers/staging/lustre/lustre/ldlm/ldlm_internal.h:247: ERROR: space required after that ';' (ctx:VxV)
drivers/staging/lustre/lustre/ldlm/ldlm_internal.h:269: ERROR: space required after that ';' (ctx:VxV)

Signed-off-by: Surya Seetharaman <suryaseetharaman.9@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: delete successive assignments to the same location

Successive assignments to the same location is meaningless and can be
deleted. The Coccinelle semantic patch was used to find cases.

@@
expression e1,e2,e3;
@@

(
 (<+...e1++...+>)=e2;
|
 (<+...e1--...+>)=e2;
|
 (<+...++e1...+>)=e2;
|
 (<+...--e1...+>)=e2;
|
e1=e2;
e1 = <+...e1...+>;
|
*e1=e2;
*e1=e3;
)

Signed-off-by: Jiayi Ye <yejiayily@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fix incorrect type in assignments

fc variable type was u16 and it has an assignment
from cpu_to_le16() so its type changed as __le16.
This bug found by sparse.

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel: Improved cleanup code

kfree on NULL pointer is a no-op.

This patch used the following semantic patch to find an instance where NULL
check is present before kfree

// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>

Code is made more simpler by breaking up of sequence of kmallocs and adding
some more exit labels.
Removed unnecessary initialization of buf and fmtbuf to NULL as they are local
variables.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove redundant memset before memcpy

The region set by the call to memset, immediately overwritten by the
subsequent call to memcpy makes the memset redundant.

This patch removes the redundant memset before memcpy using the
following coccinelle script:

@@
expression e1,e2,e3,e4;
@@

- memset(e1,e2,e3);
  memcpy(e1,e4,e3);

Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: llite: Simplify error handling

This patch fixes the following checkpatch error:
ERROR: do not use assignment in if condition
2172: FILE: drivers/staging/lustre/lustre/llite/llite_lib.c:2172:
        if (!inode || !(sbi = ll_i2sbi(inode))) {

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: Make functions static

This patch makes the following functions static
as they are only used in their respective files.
These functions were detected by sparse.
- lib-md.c   : lnet_md_validate
- lib-move.c : lnet_ni_*
               lnet_setpayloadbuffer
               lnet_peer_alive_locked
               lnet_msg2bufpool
               lnet_post_routed_recv_locked
               lnet_configure / lnet_unconfigure
               lnet_ioctl
               init_lnet
               fini_lnet

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: klnds: o2iblnd: fix null dereference on failed path in o2iblnd.c

If net is null and failed path is executed, dereference null may happen.
This patch fixes it. The following Coccinelle semantic patch was used.

@@
expression E, E1;
identifier f;
statement S1,S2,S3;
@@

* if (E == NULL)
{
  ... when != if (E == NULL) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3

Signed-off-by: Jiayi Ye <yejiayily@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove duplicated argument to ||

This patch removes duplicated argument to ||, fixing the
following warning detected using coccinelle tool:
duplicated argument to && or ||.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>