review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/msm/dpu: Fix error return code in dpu_mdss_init()

[ Upstream commit e020ac961ce5d038de66dc7f6ffca98899e9a3f3 ]

The error code returned by platform_get_irq() is stored in 'irq', it's
forgotten to be copied to 'ret' before being returned. As a result, the
value 0 of 'ret' is returned incorrectly.

After the above fix is completed, initializing the local variable 'ret'
to 0 is no longer needed, remove it.

In addition, when dpu_mdss_init() is successfully returned, the value of
'ret' is always 0. Therefore, replace "return ret" with "return 0" to make
the code clearer.

Fixes: 070e64dc1bbc ("drm/msm/dpu: Convert to a chained irq chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210510063805.3262-2-thunder.leizhen@huawei.com
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix error return code in msm_drm_init()

[ Upstream commit a1c9b1e3bdd6d8dc43c18699772fb6cf4497d45a ]

Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: 7f9743abaa79 ("drm/msm: validate display and event threads")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508022836.1777-1-thunder.leizhen@huawei.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix null ptr deref with mixed tail calls and subprogs

[ Upstream commit 7506d211b932870155bcb39e3dd9e39fab45a7c7 ]

The sub-programs prog->aux->poke_tab[] is populated in jit_subprogs() and
then used when emitting 'BPF_JMP|BPF_TAIL_CALL' insn->code from the
individual JITs. The poke_tab[] to use is stored in the insn->imm by
the code adding it to that array slot. The JIT then uses imm to find the
right entry for an individual instruction. In the x86 bpf_jit_comp.c
this is done by calling emit_bpf_tail_call_direct with the poke_tab[]
of the imm value.

However, we observed the below null-ptr-deref when mixing tail call
programs with subprog programs. For this to happen we just need to
mix bpf-2-bpf calls and tailcalls with some extra calls or instructions
that would be patched later by one of the fixup routines. So whats
happening?

Before the fixup_call_args() -- where the jit op is done -- various
code patching is done by do_misc_fixups(). This may increase the
insn count, for example when we patch map_lookup_up using map_gen_lookup
hook. This does two things. First, it means the instruction index,
insn_idx field, of a tail call instruction will move by a 'delta'.

In verifier code,

struct bpf_jit_poke_descriptor desc = {
  .reason = BPF_POKE_REASON_TAIL_CALL,
  .tail_call.map = BPF_MAP_PTR(aux->map_ptr_state),
  .tail_call.key = bpf_map_key_immediate(aux),
  .insn_idx = i + delta,
};

Then subprog start values subprog_info[i].start will be updated
with the delta and any poke descriptor index will also be updated
with the delta in adjust_poke_desc(). If we look at the adjust
subprog starts though we see its only adjusted when the delta
occurs before the new instructions,

        /* NOTE: fake 'exit' subprog should be updated as well. */
        for (i = 0; i <= env->subprog_cnt; i++) {
                if (env->subprog_info[i].start <= off)
                        continue;

Earlier subprograms are not changed because their start values
are not moved. But, adjust_poke_desc() does the offset + delta
indiscriminately. The result is poke descriptors are potentially
corrupted.

Then in jit_subprogs() we only populate the poke_tab[]
when the above insn_idx is less than the next subprogram start. From
above we corrupted our insn_idx so we might incorrectly assume a
poke descriptor is not used in a subprogram omitting it from the
subprogram. And finally when the jit runs it does the deref of poke_tab
when emitting the instruction and crashes with below. Because earlier
step omitted the poke descriptor.

The fix is straight forward with above context. Simply move same logic
from adjust_subprog_starts() into adjust_poke_descs() and only adjust
insn_idx when needed.

[   82.396354] bpf_testmod: version magic '5.12.0-rc2alu+ SMP preempt mod_unload ' should be '5.12.0+ SMP preempt mod_unload '
[   82.623001] loop10: detected capacity change from 0 to 8
[   88.487424] ==================================================================
[   88.487438] BUG: KASAN: null-ptr-deref in do_jit+0x184a/0x3290
[   88.487455] Write of size 8 at addr 0000000000000008 by task test_progs/5295
[   88.487471] CPU: 7 PID: 5295 Comm: test_progs Tainted: G          I       5.12.0+ #386
[   88.487483] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[   88.487490] Call Trace:
[   88.487498]  dump_stack+0x93/0xc2
[   88.487515]  kasan_report.cold+0x5f/0xd8
[   88.487530]  ? do_jit+0x184a/0x3290
[   88.487542]  do_jit+0x184a/0x3290
...
[   88.487709]  bpf_int_jit_compile+0x248/0x810
...
[   88.487765]  bpf_check+0x3718/0x5140
...
[   88.487920]  bpf_prog_load+0xa22/0xf10

Fixes: a748c6975dea3 ("bpf: propagate poke descriptors to subprograms")
Reported-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: hwsim: avoid possible crash in hwsim_del_edge_nl()

[ Upstream commit 0303b30375dff5351a79cc2c3c87dfa4fda29bed ]

Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE
must be present to avoid a crash.

Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210621180244.882076-1-eric.dumazet@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: hwsim: Fix memory leak in hwsim_add_one

[ Upstream commit 28a5501c3383f0e6643012c187b7c2027ef42aea ]

No matter from hwsim_remove or hwsim_del_radio_nl, hwsim_del fails to
remove the entry in the edges list. Take the example below, phy0, phy1
and e0 will be deleted, resulting in e1 not freed and accessed in the
future.

              hwsim_phys
                  |
    ------------------------------
    |                            |
phy0 (edges)                 phy1 (edges)
   ----> e1 (idx = 1)             ----> e0 (idx = 0)

Fix this by deleting and freeing all the entries in the edges list
between hwsim_edge_unsubscribe_me and list_del(&phy->list).

Reported-by: syzbot+b80c9959009a9325cdff@syzkaller.appspotmail.com
Fixes: 1c9f4a3fce77 ("ieee802154: hwsim: fix rcu handling")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210616020901.2759466-1-mudongliangabcd@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tc-testing: fix list handling

[ Upstream commit b4fd096cbb871340be837491fa1795864a48b2d9 ]

python lists don't have an 'add' method, but 'append'.

Fixes: 14e5175e9e04 ("tc-testing: introduce scapyPlugin for basic traffic")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ti: am65-cpsw-nuss: Fix crash when changing number of TX queues

[ Upstream commit ce8eb4c728ef40b554b4f3d8963f11ed44502e00 ]

When changing number of TX queues using ethtool:

# ethtool -L eth0 tx 1
[  135.301047] Unable to handle kernel paging request at virtual address 00000000af5d0000
[...]
[  135.525128] Call trace:
[  135.525142]  dma_release_from_dev_coherent+0x2c/0xb0
[  135.525148]  dma_free_attrs+0x54/0xe0
[  135.525156]  k3_cppi_desc_pool_destroy+0x50/0xa0
[  135.525164]  am65_cpsw_nuss_remove_tx_chns+0x88/0xdc
[  135.525171]  am65_cpsw_set_channels+0x3c/0x70
[...]

This is because k3_cppi_desc_pool_destroy() which is called after
k3_udma_glue_release_tx_chn() in am65_cpsw_nuss_remove_tx_chns()
references struct device that is unregistered at the end of
k3_udma_glue_release_tx_chn()

Therefore the right order is to call k3_cppi_desc_pool_destroy() and
destroy desc pool before calling k3_udma_glue_release_tx_chn().
Fix this throughout the driver.

Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ipv4: swap flow ports when validating source

[ Upstream commit c69f114d09891adfa3e301a35d9e872b8b7b5a50 ]

When doing source address validation, the flowi4 struct used for
fib_lookup should be in the reverse direction to the given skb.
fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect
should thus be swapped.

Fixes: 5a847a6e1477 ("net/ipv4: Initialize proto and ports in flow struct")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip6_tunnel: fix GRE6 segmentation

[ Upstream commit a6e3f2985a80ef6a45a17d2d9d9151f17ea3ce07 ]

Commit 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
moved assiging inner_ipproto down from ipxip6_tnl_xmit() to
its callee ip6_tnl_xmit(). The latter is also used by GRE.

Since commit 38720352412a ("gre: Use inner_proto to obtain inner
header protocol") GRE had been depending on skb->inner_protocol
during segmentation. It sets it in gre_build_header() and reads
it in gre_gso_segment(). Changes to ip6_tnl_xmit() overwrite
the protocol, resulting in GSO skbs getting dropped.

Note that inner_protocol is a union with inner_ipproto,
GRE uses the former while the change switched it to the latter
(always setting it to just IPPROTO_GRE).

Restore the original location of skb_set_inner_ipproto(),
it is unclear why it was moved in the first place.

Fixes: 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vxlan: add missing rcu_read_lock() in neigh_reduce()

[ Upstream commit 85e8b032d6ebb0f698a34dd22c2f13443d905888 ]

syzbot complained in neigh_reduce(), because rcu_read_lock_bh()
is treated differently than rcu_read_lock()

WARNING: suspicious RCU usage
5.13.0-rc6-syzkaller #0 Not tainted
-----------------------------
include/net/addrconf.h:313 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/0:0/5:
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic64_set include/asm-generic/atomic-instrumented.h:856 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic_long_set include/asm-generic/atomic-long.h:41 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:617 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:644 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x871/0x1600 kernel/workqueue.c:2247
#1: ffffc90000ca7da8 ((work_completion)(&port->wq)){+.+.}-{0:0}, at: process_one_work+0x8a5/0x1600 kernel/workqueue.c:2251
#2: ffffffff8bf795c0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1da/0x3130 net/core/dev.c:4180

stack backtrace:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events ipvlan_process_multicast
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
__in6_dev_get include/net/addrconf.h:313 [inline]
__in6_dev_get include/net/addrconf.h:311 [inline]
neigh_reduce drivers/net/vxlan.c:2167 [inline]
vxlan_xmit+0x34d5/0x4c30 drivers/net/vxlan.c:2919
__netdev_start_xmit include/linux/netdevice.h:4944 [inline]
netdev_start_xmit include/linux/netdevice.h:4958 [inline]
xmit_one net/core/dev.c:3654 [inline]
dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3670
__dev_queue_xmit+0x2133/0x3130 net/core/dev.c:4246
ipvlan_process_multicast+0xa99/0xd70 drivers/net/ipvlan/ipvlan_core.c:287
process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
kthread+0x3b1/0x4a0 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Fixes: f564f45c4518 ("vxlan: add ipv6 proxy support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtw88: 8822c: fix lc calibration timing

[ Upstream commit 05684fd583e1acc34dddea283838fbfbed4904a0 ]

Before this patch, we use value from 2 seconds ago to decide
whether we should do lc calibration.
Although this don't happen frequently, fix flow to the way it should be.

Fixes: 7ae7784ec2a8 ("rtw88: 8822c: add LC calibration for RTL8822C")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210426013252.5665-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: increase PNVM load timeout

[ Upstream commit 5cc816ef9db1fe03f73e56e9d8f118add9c6efe4 ]

The FW has a watchdog of 200ms in the PNVM load flow, so the driver
should have a slightly higher timeout. Change the timeout from 100ms
to 250ms.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 70d3ca86b025 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.ba22aec1e2be.I36bfadc28c480f4fc57266c075a79e8ea4a6934f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Fix xfrm offload fallback fail case

[ Upstream commit dd72fadf2186fc8a6018f97fe72f4d5ca05df440 ]

In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.

So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.

So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().

Fixes: bdfd2d1fa79a ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pkt_sched: sch_qfq: fix qfq_change_class() error path

[ Upstream commit 0cd58e5c53babb9237b741dbef711f0a9eb6d3fd ]

If qfq_change_class() is unable to allocate memory for qfq_aggregate,
it frees the class that has been inserted in the class hash table,
but does not unhash it.

Defer the insertion after the problematic allocation.

BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:884 [inline]
BUG: KASAN: use-after-free in qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
Write of size 8 at addr ffff88814a534f10 by task syz-executor.4/31478

CPU: 0 PID: 31478 Comm: syz-executor.4 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:436
hlist_add_head include/linux/list.h:884 [inline]
qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
qfq_change_class+0x96c/0x1990 net/sched/sch_qfq.c:489
tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdc7b5f0188 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000056bf80 RCX: 00000000004665d9
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 00007fdc7b5f01d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ffcf7310b3f R14: 00007fdc7b5f0300 R15: 0000000000022000

Allocated by task 31445:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:46 [inline]
set_alloc_info mm/kasan/common.c:428 [inline]
____kasan_kmalloc mm/kasan/common.c:507 [inline]
____kasan_kmalloc mm/kasan/common.c:466 [inline]
__kasan_kmalloc+0x9b/0xd0 mm/kasan/common.c:516
kmalloc include/linux/slab.h:556 [inline]
kzalloc include/linux/slab.h:686 [inline]
qfq_change_class+0x705/0x1990 net/sched/sch_qfq.c:464
tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 31445:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:357
____kasan_slab_free mm/kasan/common.c:360 [inline]
____kasan_slab_free mm/kasan/common.c:325 [inline]
__kasan_slab_free+0xfb/0x130 mm/kasan/common.c:368
kasan_slab_free include/linux/kasan.h:212 [inline]
slab_free_hook mm/slub.c:1583 [inline]
slab_free_freelist_hook+0xdf/0x240 mm/slub.c:1608
slab_free mm/slub.c:3168 [inline]
kfree+0xe5/0x7f0 mm/slub.c:4212
qfq_change_class+0x10fb/0x1990 net/sched/sch_qfq.c:518
tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88814a534f00
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 16 bytes inside of
128-byte region [ffff88814a534f00, ffff88814a534f80)
The buggy address belongs to the page:
page:ffffea0005294d00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a534
flags: 0x57ff00000000200(slab|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000000200 ffffea00004fee00 0000000600000006 ffff8880110418c0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 29797, ts 604817765317, free_ts 604810151744
prep_new_page mm/page_alloc.c:2358 [inline]
get_page_from_freelist+0x1033/0x2b60 mm/page_alloc.c:3994
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5200
alloc_pages+0x18c/0x2a0 mm/mempolicy.c:2272
alloc_slab_page mm/slub.c:1646 [inline]
allocate_slab+0x2c5/0x4c0 mm/slub.c:1786
new_slab mm/slub.c:1849 [inline]
new_slab_objects mm/slub.c:2595 [inline]
___slab_alloc+0x4a1/0x810 mm/slub.c:2758
__slab_alloc.constprop.0+0xa7/0xf0 mm/slub.c:2798
slab_alloc_node mm/slub.c:2880 [inline]
slab_alloc mm/slub.c:2922 [inline]
__kmalloc+0x315/0x330 mm/slub.c:4050
kmalloc include/linux/slab.h:561 [inline]
kzalloc include/linux/slab.h:686 [inline]
__register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1318
mpls_dev_sysctl_register+0x1b7/0x2d0 net/mpls/af_mpls.c:1421
mpls_add_dev net/mpls/af_mpls.c:1472 [inline]
mpls_dev_notify+0x214/0x8b0 net/mpls/af_mpls.c:1588
notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2121
call_netdevice_notifiers_extack net/core/dev.c:2133 [inline]
call_netdevice_notifiers net/core/dev.c:2147 [inline]
register_netdevice+0x106b/0x1500 net/core/dev.c:10312
veth_newlink+0x585/0xac0 drivers/net/veth.c:1547
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3452
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1298 [inline]
free_pcp_prepare+0x223/0x300 mm/page_alloc.c:1342
free_unref_page_prepare mm/page_alloc.c:3250 [inline]
free_unref_page+0x12/0x1d0 mm/page_alloc.c:3298
__vunmap+0x783/0xb60 mm/vmalloc.c:2566
free_work+0x58/0x70 mm/vmalloc.c:80
process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
kthread+0x3b1/0x4a0 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Memory state around the buggy address:
ffff88814a534e00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88814a534e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88814a534f00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88814a534f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88814a535000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: 462dbc9101acd ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables_offload: check FLOW_DISSECTOR_KEY_BASIC in VLAN transfer logic

[ Upstream commit ea45fdf82cc90430bb7c280e5e53821e833782c5 ]

The VLAN transfer logic should actually check for
FLOW_DISSECTOR_KEY_BASIC, not FLOW_DISSECTOR_KEY_CONTROL. Moreover, do
not fallback to case 2) .n_proto is set to 802.1q or 802.1ad, if
FLOW_DISSECTOR_KEY_BASIC is unset.

Fixes: 783003f3bb8a ("netfilter: nftables_offload: special ethertype handling for VLAN")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tls: prevent oversized sendfile() hangs by ignoring MSG_MORE

[ Upstream commit d452d48b9f8b1a7f8152d33ef52cfd7fe1735b0a ]

We got multiple reports that multi_chunk_sendfile test
case from tls selftest fails. This was sort of expected,
as the original fix was never applied (see it in the first
Link:). The test in question uses sendfile() with count
larger than the size of the underlying file. This will
make splice set MSG_MORE on all sendpage calls, meaning
TLS will never close and flush the last partial record.

Eric seem to have addressed a similar problem in
commit 35f9c09fe9c7 ("tcp: tcp_sendpages() should call tcp_push() once")
by introducing MSG_SENDPAGE_NOTLAST. Unlike MSG_MORE
MSG_SENDPAGE_NOTLAST is not set on the last call
of a "pipefull" of data (PIPE_DEF_BUFFERS == 16,
so every 16 pages or whenever we run out of data).

Having a break every 16 pages should be fine, TLS
can pack exactly 4 pages into a record, so for
aligned reads there should be no difference,
unaligned may see one extra record per sendpage().

Sticking to TCP semantics seems preferable to modifying
splice, but we can revisit it if real life scenarios
show a regression.

Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/netdev/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: add barrier to ensure correct ordering for lockless qdisc

[ Upstream commit 89837eb4b2463c556a123437f242d6c2bc62ce81 ]

The spin_trylock() was assumed to contain the implicit
barrier needed to ensure the correct ordering between
STATE_MISSED setting/clearing and STATE_MISSED checking
in commit a90c57f2cedd ("net: sched: fix packet stuck
problem for lockless qdisc").

But it turns out that spin_trylock() only has load-acquire
semantic, for strongly-ordered system(like x86), the compiler
barrier implicitly contained in spin_trylock() seems enough
to ensure the correct ordering. But for weakly-orderly system
(like arm64), the store-release semantic is needed to ensure
the correct ordering as clear_bit() and test_bit() is store
operation, see queued_spin_lock().

So add the explicit barrier to ensure the correct ordering
for the above case.

Fixes: a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vrf: do not push non-ND strict packets with a source LLA through packet taps again

[ Upstream commit 603113c514e95c3350598bc3cccbd03af7ea4ab2 ]

Non-ND strict packets with a source LLA go through the packet taps
again, while non-ND strict packets with other source addresses do not,
and we can see a clone of those packets on the vrf interface (we should
not). This is due to a series of changes:

Commit 6f12fa775530[1] made non-ND strict packets not being pushed again
in the packet taps. This changed with commit 205704c618af[2] for those
packets having a source LLA, as they need a lookup with the orig_iif.

The issue now is those packets do not skip the 'vrf_ip6_rcv' function to
the end (as the ones without a source LLA) and go through the check to
call packet taps again. This check was changed by commit 6f12fa775530[1]
and do not exclude non-strict packets anymore. Packets matching
'need_strict && !is_ndisc && is_ll_src' are now being sent through the
packet taps again. This can be seen by dumping packets on the vrf
interface.

Fix this by having the same code path for all non-ND strict packets and
selectively lookup with the orig_iif for those with a source LLA. This
has the effect to revert to the pre-205704c618af[2] condition, which
should also be easier to maintain.

[1] 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
[2] 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")

Fixes: 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ezchip: fix error handling

[ Upstream commit 0de449d599594f5472e00267d651615c7f2c6c1d ]

As documented at drivers/base/platform.c for platform_get_irq:

* Gets an IRQ for a platform device and prints an error message if finding the
* IRQ fails. Device drivers should check the return value for errors so as to
* not pass a negative integer value to the request_irq() APIs.

So, the driver should check that platform_get_irq() return value
is _negative_, not that it's equal to zero, because -ENXIO (return
value from request_irq() if irq was not found) will
pass this check and it leads to passing negative irq to request_irq()

Fixes: 0dd077093636 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ezchip: fix UAF in nps_enet_remove

[ Upstream commit e4b8700e07a86e8eab6916aa5c5ba99042c34089 ]

priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after netif_napi_del()
call.

Fixes: 0dd077093636 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: aeroflex: fix UAF in greth_of_remove

[ Upstream commit e3a5de6d81d8b2199935c7eb3f7d17a50a7075b7 ]

static int greth_of_remove(struct platform_device *of_dev)
{
...
struct greth_private *greth = netdev_priv(ndev);
...
unregister_netdev(ndev);
free_netdev(ndev);

of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
...
}

greth is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing greth
pointer. So, fix it by moving free_netdev() after of_iounmap()
call.

Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix NULL pointer dereference in tx_prepare_skb()

[ Upstream commit 8d3cdc1bbb1d355f0ebef973175ae5fd74286feb ]

Fix theoretical NULL pointer dereference in mt7615_tx_prepare_skb and
mt7663_usb_sdio_tx_prepare_skb routines. This issue has been identified
by code analysis.

Fixes: 6aa4ed7927f11 ("mt76: mt7615: implement DMA support for MT7622")
Fixes: 4bb586bc33b98 ("mt76: mt7663u: sync probe sampling with rate configuration")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: fix possible NULL pointer dereference in mt76_tx

[ Upstream commit d7400a2f3e295b8cee692c7a66e10f60015a3c37 ]

Even if this is not a real issue since mt76_tx is never run with wcid set
to NULL, fix a theoretical NULL pointer dereference in mt76_tx routine

Fixes: db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: Fix the error return code of xdp_redirect's main()

[ Upstream commit 7c6090ee2a7b3315410cfc83a94c3eb057407b25 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

If bpf_map_update_elem() failed, main() should return a negative error.

Fixes: 832622e6bd18 ("xdp: sample program for new bpf_redirect helper")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210616042534.315097-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: Fix Segmentation fault for xdp_redirect command

[ Upstream commit 85102ba58b4125ebad941d7555c3c248b23efd16 ]

A Segmentation fault error is caused when the following command
is executed.

$ sudo ./samples/bpf/xdp_redirect lo
Segmentation fault

This command is missing a device <IFNAME|IFINDEX> as an argument, resulting
in out-of-bounds access from argv.

If the number of devices for the xdp_redirect parameter is not 2,
we should report an error and exit.

Fixes: 24251c264798 ("samples/bpf: add option for native and skb mode for redirect apps")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210616042324.314832-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Set minimal max_send_wr and max_recv_wr

[ Upstream commit 5e91eabf66c854f16ca2e954e5c68939bc81601e ]

Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory with
no benefits.

For max_send_wr, we don't really need alway max_qp_wr size when creating
qp, reduce it to cq_size.

For max_recv_wr, cq_size is enough.

With the patch when sess_queue_depth=128, per session (2 paths) memory
consumption reduced from 188 MB to 65MB

When always_invalidate is enabled, we need send more wr, so treat it
special.

Fixes: 9cb837480424e ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210614090337.29557-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix libelf endian handling in resolv_btfids

[ Upstream commit 61e8aeda9398925f8c6fc290585bdd9727d154c4 ]

The vmlinux ".BTF_ids" ELF section is declared in btf_ids.h to hold a list
of zero-filled BTF IDs, which is then patched at link-time with correct
values by resolv_btfids. The section is flagged as "allocable" to preclude
compression, but notably the section contents (BTF IDs) are untyped.

When patching the BTF IDs, resolve_btfids writes in host-native endianness
and relies on libelf for any required translation on reading and updating
vmlinux. However, since the type of the .BTF_ids section content defaults
to ELF_T_BYTE (i.e. unsigned char), no translation occurs. This results in
incorrect patched values when cross-compiling to non-native endianness,
and can manifest as kernel Oops and test failures which are difficult to
troubleshoot [1].

Explicitly set the type of patched data to ELF_T_WORD, the architecture-
neutral ELF type corresponding to the u32 BTF IDs. This enables libelf to
transparently perform any needed endian conversions.

Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frank Eigler <fche@redhat.com>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/CAPGftE_eY-Zdi3wBcgDfkz_iOr1KF10n=9mJHm1_a_PykcsoeA@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210618061404.818569-1-Tony.Ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Fix broken Tx ring validation

[ Upstream commit f654fae47e83e56b454fbbfd0af0a4f232e356d6 ]

Fix broken Tx ring validation for AF_XDP. The commit under the Fixes
tag, fixed an off-by-one error in the validation but introduced
another error. Descriptors are now let through even if they straddle a
chunk boundary which they are not allowed to do in aligned mode. Worse
is that they are let through even if they straddle the end of the umem
itself, tricking the kernel to read data outside the allowed umem
region which might or might not be mapped at all.

Fix this by reintroducing the old code, but subtract the length by one
to fix the off-by-one error that the original patch was
addressing. The test chunk != chunk_end makes sure packets do not
straddle chunk boundraries. Note that packets of zero length are
allowed in the interface, therefore the test if the length is
non-zero.

Fixes: ac31565c2193 ("xsk: Fix for xp_aligned_validate_desc() when len == chunk_size")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20210618075805.14412-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Fix missing validation for skb and unaligned mode

[ Upstream commit 2f99619820c2269534eb2c0cde44870313c6d353 ]

Fix a missing validation of a Tx descriptor when executing in skb mode
and the umem is in unaligned mode. A descriptor could point to a
buffer straddling the end of the umem, thus effectively tricking the
kernel to read outside the allowed umem region. This could lead to a
kernel crash if that part of memory is not mapped.

In zero-copy mode, the descriptor validation code rejects such
descriptors by checking a bit in the DMA address that tells us if the
next page is physically contiguous or not. For the last page in the
umem, this bit is not set, therefore any descriptor pointing to a
packet straddling this last page boundary will be rejected. However,
the skb path does not use this bit since it copies out data and can do
so to two different pages. (It also does not have the array of DMA
address, so it cannot even store this bit.) The code just returned
that the packet is always physically contiguous. But this is
unfortunately also returned for the last page in the umem, which means
that packets that cross the end of the umem are being allowed, which
they should not be.

Fix this by introducing a check for this in the SKB path only, not
penalizing the zero-copy path.

Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20210617092255.3487-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Whitelist test_progs.h from .gitignore

[ Upstream commit 809ed84de8b3f2fd7b1d06efb94bf98fd318a7d7 ]

Somehow test_progs.h was being included by the existing rule:

    /test_progs*

This is bad because:

    1) test_progs.h is a checked in file
    2) grep-like tools like ripgrep[0] respect gitignore and
       test_progs.h was being hidden from searches

[0]: https://github.com/BurntSushi/ripgrep

Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/a46f64944bf678bc652410ca6028d3450f4f7f4b.1623880296.git.dxu@dxuuu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix qp reference counting for atomic ops

[ Upstream commit 15ae1375ea91ae2dee6f12d71a79d8c0a10a30bf ]

Currently the rdma_rxe driver attempts to protect atomic responder
resources by taking a reference to the qp which is only freed when the
resource is recycled for a new read or atomic operation. This means that
in normal circumstances there is almost always an extra qp reference once
an atomic operation has been executed which prevents cleaning up the qp
and associated pd and cqs when the qp is destroyed.

This patch removes the call to rxe_add_ref() in send_atomic_ack() and the
call to rxe_drop_ref() in free_rd_atomic_resource(). If the qp is
destroyed while a peer is retrying an atomic op it will cause the
operation to fail which is acceptable.

Link: https://lore.kernel.org/r/20210604230558.4812-1-rpearsonhpe@gmail.com
Reported-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Fixes: 86af61764151 ("IB/rxe: remove unnecessary skb_clone")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_tproxy: restrict support to TCP and UDP transport protocols

[ Upstream commit 52f0f4e178c757b3d356087376aad8bd77271828 ]

Add unfront check for TCP and UDP packets before performing further
processing.

Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_osf: check for TCP packet before further processing

[ Upstream commit 8f518d43f89ae00b9cf5460e10b91694944ca1a8 ]

The osf expression only supports for TCP packets, add a upfront sanity
check to skip packet parsing if this is not a TCP packet.

Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_exthdr: check for IPv6 packet before further processing

[ Upstream commit cdd73cc545c0fb9b1a1f7b209f4f536e7990cff4 ]

ipv6_find_hdr() does not validate that this is an IPv6 packet. Add a
sanity check for calling ipv6_find_hdr() to make sure an IPv6 packet
is passed for parsing.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Don't add slave port to unaffiliated list

[ Upstream commit 7ce6095e3bff8e20ce018b050960b527e298f7df ]

The mlx5_ib_bind_slave_port() doesn't remove multiport device from the
unaffiliated list, but mlx5_ib_unbind_slave_port() did it. This unbalanced
flow caused to the situation where mlx5_ib_unaffiliated_port_list was
changed during iteration.

Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/2726e6603b1e6ecfe76aa5a12a063af72173bcf7.1622477058.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlabel: Fix memory leak in netlbl_mgmt_add_common

[ Upstream commit b8f6b0522c298ae9267bd6584e19b942a0636910 ]

Hulk Robot reported memory leak in netlbl_mgmt_add_common.
The problem is non-freed map in case of netlbl_domhsh_add() failed.

BUG: memory leak
unreferenced object 0xffff888100ab7080 (size 96):
  comm "syz-executor537", pid 360, jiffies 4294862456 (age 22.678s)
  hex dump (first 32 bytes):
    05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01  ................
  backtrace:
    [<0000000008b40026>] netlbl_mgmt_add_common.isra.0+0xb2a/0x1b40
    [<000000003be10950>] netlbl_mgmt_add+0x271/0x3c0
    [<00000000c70487ed>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320
    [<000000001f2ff614>] genl_rcv_msg+0x2bf/0x4f0
    [<0000000089045792>] netlink_rcv_skb+0x134/0x3d0
    [<0000000020e96fdd>] genl_rcv+0x24/0x40
    [<0000000042810c66>] netlink_unicast+0x4a0/0x6a0
    [<000000002e1659f0>] netlink_sendmsg+0x789/0xc70
    [<000000006e43415f>] sock_sendmsg+0x139/0x170
    [<00000000680a73d7>] ____sys_sendmsg+0x658/0x7d0
    [<0000000065cbb8af>] ___sys_sendmsg+0xf8/0x170
    [<0000000019932b6c>] __sys_sendmsg+0xd3/0x190
    [<00000000643ac172>] do_syscall_64+0x37/0x90
    [<000000009b79d6dc>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: send beacon template after vdev_start/restart during csa

[ Upstream commit 979ebc54cf13bd1e3eb6e21766d208d5de984fb8 ]

Firmware has added assert if beacon template is received after
vdev_down. Firmware expects beacon template after vdev_start
and before vdev_up. This change is needed to support MBSSID EMA
cases in firmware.

Hence, Change the sequence in ath11k as expected from firmware.
This new change is not causing any issues with older
firmware.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1.r3-00011-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1.r4-00008-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
[sven@narfation.org: added tested-on/fixes information]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210525133028.2805615-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix an error code in ath10k_add_interface()

[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ]

When the code execute this if statement, the value of ret is 0.
However, we can see from the ath10k_warn() log that the value of
ret should be -EINVAL.

Clean up smatch warning:

drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn:
missing error code 'ret'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621939577-62218-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Fix an error handling path in ath11k_core_fetch_board_data_api_n()

[ Upstream commit 515bda1d1e51c64edf2a384a58801f85a80a3f2d ]

All error paths but this one 'goto err' in order to release some
resources.
Fix this.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/e959eb544f3cb04258507d8e25a6f12eab126bde.1621676864.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

cw1200: Revert unnecessary patches that fix unreal use-after-free bugs

[ Upstream commit 3f60f4685699aa6006e58e424637e8e413e0a94d ]

A previous commit 4f68ef64cd7f ("cw1200: Fix concurrency
use-after-free bugs in cw1200_hw_scan()") tried to fix a seemingly
use-after-free bug between cw1200_bss_info_changed() and
cw1200_hw_scan(), where the former frees a sk_buff pointed
to by frame.skb, and the latter accesses the sk_buff
pointed to by frame.skb. However, this issue should be a
false alarm because:

(1) "frame.skb" is not a shared variable between the above
two functions, because "frame" is a local function variable,
each of the two functions has its own local "frame" - they
just happen to have the same variable name.

(2) the sk_buff(s) pointed to by these two "frame.skb" are
also two different object instances, they are individually
allocated by different dev_alloc_skb() within the two above
functions. To free one object instance will not invalidate
the access of another different one.

Based on these facts, the previous commit should be unnecessary.
Moreover, it also introduced a missing unlock which was
addressed in a subsequent commit 51c8d24101c7 ("cw1200: fix missing
unlock on error in cw1200_hw_scan()"). Now that the
original use-after-free is unreal, these two commits should
be reverted. This patch performs the reversion.

Fixes: 4f68ef64cd7f ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()")
Fixes: 51c8d24101c7 ("cw1200: fix missing unlock on error in cw1200_hw_scan()")
Signed-off-by: Hang Zhang <zh.nvgt@gmail.com>
Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210521223238.25020-1-zh.nvgt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmsmac: mac80211_if: Fix a resource leak in an error handling path

[ Upstream commit 9a25344d5177c2b9285532236dc3d10a091f39a8 ]

If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()'
as already done in the remove function.

Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/8fbc171a1a493b38db5a6f0873c6021fca026a6c.1620852921.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: Fix a double-free in brcmf_sdio_bus_reset

[ Upstream commit 7ea7a1e05c7ff5ffc9f9ec1f0849f6ceb7fcd57c ]

brcmf_sdiod_remove has been called inside brcmf_sdiod_probe when fails,
so there's no need to call another one. Otherwise, sdiodev->freezer
would be double freed.

Fixes: 7836102a750a ("brcmfmac: reset SDIO bus on a firmware crash")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210601100128.69561-1-tongtiangen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: correctly report average RSSI in station info

[ Upstream commit 9a1590934d9a02e570636432b93052c0c035f31f ]

The rx_lastpkt_rssi field provided by the firmware is suitable for
NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an
average. Fix up the assignments and set the correct STA_INFO bits. This
lets userspace know that the average RSSI is part of the station info.

Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-2-alsi@bang-olufsen.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: fix setting of station info chains bitmask

[ Upstream commit feb45643762172110cb3a44f99dd54304f33b711 ]

The sinfo->chains field is a bitmask for filled values in chain_signal
and chain_signal_avg, not a count. Treat it as such so that the driver
can properly report per-chain RSSI information.

Before (MIMO mode):

  $ iw dev wlan0 station dump
      ...
      signal: -51 [-51] dBm

After (MIMO mode):

  $ iw dev wlan0 station dump
      ...
      signal: -53 [-53, -54] dBm

Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-1-alsi@bang-olufsen.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>

ssb: Fix error return code in ssb_bus_scan()

[ Upstream commit 77a0989baa427dbd242c5784d05a53ca3d197d43 ]

Fix to return -EINVAL from the error handling case instead of 0, as done
elsewhere in this function.

Fixes: 61e115a56d1a ("[SSB]: add Sonics Silicon Backplane bus support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515072949.7151-1-thunder.leizhen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: Move hal_buf allocation to devm_kmalloc in probe

[ Upstream commit ef48667557c53d4b51a1ee3090eab7699324c9de ]

Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem
since we should have setup all of the buffers we required by the time
ieee80211_register_hw() is called.

struct ieee80211_ops callbacks may run prior to mac_start() and therefore
wcn->hal_buf must be initialized.

This is easily remediated by moving the allocation to probe() taking the
opportunity to tidy up freeing memory by using devm_kmalloc().

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605173347.2266003-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mq: remove SYS PLL 1/2 clock gates

[ Upstream commit c586f53ae159c6c1390f093a1ec94baef2df9f3a ]

Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks
the uSDHC module which is sporadically unable to enumerate devices after
this change. Also it makes AMP clock management harder with no obvious
benefit to Linux, so just revert the change.

Link: https://lore.kernel.org/r/20210528180135.1640876-1-l.stach@pengutronix.de
Fixes: b04383b6a558 ("clk: imx8mq: Define gates for pll1/2 fixed dividers")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: hwsim: Fix possible memory leak in hwsim_subscribe_all_others

[ Upstream commit ab372c2293f5d0b279f31c8d768566ea37602dc9 ]

In hwsim_subscribe_all_others, the error handling code performs
incorrectly if the second hwsim_alloc_edge fails. When this issue occurs,
it goes to sub_fail, without cleaning the edges allocated before.

Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210611015812.1626999-1-mudongliangabcd@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: carl9170: fix LEDS build errors & warnings

[ Upstream commit 272fdc0c4542fad173b44965be02a16d6db95499 ]

kernel test robot reports over 200 build errors and warnings
that are due to this Kconfig problem when CARL9170=m,
MAC80211=y, and LEDS_CLASS=m.

WARNING: unmet direct dependencies detected for MAC80211_LEDS
  Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y])
  Selected by [m]:
  - CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m]

CARL9170_LEDS selects MAC80211_LEDS even though its kconfig
dependencies are not met. This happens because 'select' does not follow
any Kconfig dependency chains.

Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where
the latter supplies any needed dependencies on LEDS_CLASS.

Fixes: 1d7e1e6b1b8ed ("carl9170: Makefile, Kconfig files and MAINTAINERS")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210530031134.23274-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: add missing error return code in ath10k_pci_probe()

[ Upstream commit e2783e2f39ba99178dedfc1646d5cc0979d1bab3 ]

When chip_id is not supported, the resources will be freed
on path err_unsupported, these resources will also be freed
when calling ath10k_pci_remove(), it will cause double free,
so return -ENODEV when it doesn't support the device with wrong
chip_id.

Fixes: c0c378f9907c ("ath10k: remove target soc ps code")
Fixes: 7505f7c3ec1d ("ath10k: create a chip revision whitelist")
Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522105822.1091848-3-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: go to path err_unsupported when chip id is not supported

[ Upstream commit 9e88dd431d2345acdb7a549f3e88aaf4c2a307a1 ]

When chip id is not supported, it go to path err_unsupported
to print the error message.

Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522105822.1091848-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/bpftool: Fix error return code in do_batch()

[ Upstream commit ca16b429f39b4ce013bfa7e197f25681e65a2a42 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 668da745af3c2 ("tools: bpftool: add support for quotations ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210609115916.2186872-1-chengzhihao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: qxl: ensure surf.data is ininitialized

[ Upstream commit fbbf23ddb2a1cc0c12c9f78237d1561c24006f50 ]

The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: vc5: fix output disabling when enabling a FOD

[ Upstream commit fc336ae622df0ec114dbe5551a4d2760c535ecd0 ]

On 5P49V6965, when an output is enabled we enable the corresponding
FOD. When this happens for the first time, and specifically when writing
register VC5_OUT_DIV_CONTROL in vc5_clk_out_prepare(), all other outputs
are stopped for a short time and then restarted.

According to Renesas support this is intended: "The reason for that is VC6E
has synced up all output function".

This behaviour can be disabled at least on VersaClock 6E devices, of which
only the 5P49V6965 is currently implemented by this driver. This requires
writing bit 7 (bypass_sync{1..4}) in register 0x20..0x50. Those registers
are named "Unused Factory Reserved Register", and the bits are documented
as "Skip VDDO<N> verification", which does not clearly explain the relation
to FOD sync. However according to Renesas support as well as my testing
setting this bit does prevent disabling of all clock outputs when enabling
a FOD.

See "VersaClock ® 6E Family Register Descriptions and Programming Guide"
(August 30, 2018), Table 116 "Power Up VDD check", page 58:
https://www.renesas.com/us/en/document/mau/versaclock-6e-family-register-descriptions-and-programming-guide

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210527211647.1520720-1-luca@lucaceresoli.net
Fixes: 2bda748e6ad8 ("clk: vc5: Add support for IDT VersaClock 5P49V6965")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Fix error path of hpd-gpios

[ Upstream commit e075a7811977ff51c917a65ed1896e08231d2615 ]

If the of_get_named_gpio_flags call fails in vc4_hdmi_bind, we jump to
the err_unprepare_hsm label. That label will then call
pm_runtime_disable and put_device on the DDC device.

We just retrieved the DDC device, so the latter is definitely justified.
However at that point we still haven't called pm_runtime_enable, so the
call to pm_runtime_disable is not supposed to be there.

Fixes: 10ee275cb12f ("drm/vc4: prepare for CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/pl111: Actually fix CONFIG_VEXPRESS_CONFIG depends

[ Upstream commit 4e566003571244f508408f59ce78f6ac2ccdba8e ]

VEXPRESS_CONFIG needs to either be missing, built-in, or modular when
pl111 is modular. Update the Kconfig to reflect the need.

Fixes: 4dc7c97d04dc ("drm/pl111: depend on CONFIG_VEXPRESS_CONFIG")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210604014055.4060521-1-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix failure during driver load

[ Upstream commit 32a25f2ea690dfaace19f7a3a916f5d7e1ddafe8 ]

To avoid the following failure when trying to load the rdma_rxe module
while IPv6 is disabled, add a check for EAFNOSUPPORT and ignore the
failure, also delete the needless debug print from rxe_setup_udp_tunnel().

$ modprobe rdma_rxe
modprobe: ERROR: could not insert 'rdma_rxe': Operation not permitted

Fixes: dfdd6158ca2c ("IB/rxe: Fix kernel panic in udp_setup_tunnel")
Link: https://lore.kernel.org/r/20210603090112.36341-1-kamalheib1@gmail.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/pl111: depend on CONFIG_VEXPRESS_CONFIG

[ Upstream commit 4dc7c97d04dcaa9f19482f70dcfdbeb52cc7193f ]

Avoid randconfig build failures by requiring VEXPRESS_CONFIG:

aarch64-linux-gnu-ld: drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_vexpress_clcd_init':
pl111_versatile.c:(.text+0x220): undefined reference to `devm_regmap_init_vexpress_config'

Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-4-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Sanitize WQ state received from the userspace

[ Upstream commit f97442887275d11c88c2899e720fe945c1f61488 ]

The mlx4 and mlx5 implemented differently the WQ input checks. Instead of
duplicating mlx4 logic in the mlx5, let's prepare the input in the central
place.

The mlx5 implementation didn't check for validity of state input. It is
not real bug because our FW checked that, but still worth to fix.

Fixes: f213c0527210 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/ac41ad6a81b095b1a8ad453dcf62cf8d3c5da779.1621413310.git.leonro@nvidia.com
Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_vlan: Fix modify to allow 0

[ Upstream commit 9c5eee0afca09cbde6bd00f77876754aaa552970 ]

Currently vlan modification action checks existence of vlan priority by
comparing it to 0. Therefore it is impossible to modify existing vlan
tag to have priority 0.

For example, the following tc command will change the vlan id but will
not affect vlan priority:

tc filter add dev eth1 ingress matchall action vlan modify id 300 \
priority 0 pipe mirred egress redirect dev eth2

The incoming packet on eth1:

ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4

will be changed to:

ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4

although the user has intended to have p == 0.

The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params
and rely on it when deciding to set the priority.

Fixes: 45a497f2d149a4a8061c (net/sched: act_vlan: Introduce TCA_VLAN_ACT_MODIFY vlan action)
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: remove the fragment check for ipv6 beet mode

[ Upstream commit eebd49a4ffb420a991c606e54aa3c9f02857a334 ]

In commit 68dc022d04eb ("xfrm: BEET mode doesn't support fragments
for inner packets"), it tried to fix the issue that in TX side the
packet is fragmented before the ESP encapping while in the RX side
the fragments always get reassembled before decapping with ESP.

This is not true for IPv6. IPv6 is different, and it's using exthdr
to save fragment info, as well as the ESP info. Exthdrs are added
in TX and processed in RX both in order. So in the above case, the
ESP decapping will be done earlier than the fragment reassembling
in TX side.

Here just remove the fragment check for the IPv6 inner packets to
recover the fragments support for BEET mode.

Fixes: 68dc022d04eb ("xfrm: BEET mode doesn't support fragments for inner packets")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra30: Use 300MHz for video decoder by default

[ Upstream commit 56bb7c28ad00e7bcfc851c4e183c42d148d3ad4e ]

The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.

Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ehea: fix error return code in ehea_restart_qps()

[ Upstream commit 015dbf5662fd689d581c0bc980711b073ca09a1a ]

Fix to return -EFAULT from the error handling case instead of 0, as done
elsewhere in this function.

By the way, when get_zeroed_page() fails, directly return -ENOMEM to
simplify code.

Fixes: 2c69448bbced ("ehea: DLPAR memory add fix")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Fix memory leak of not-freed sess->stats and stats->pcpu_stats

[ Upstream commit 7ecd7e290bee0ab9cf75b79a367a4cc113cf8292 ]

sess->stats and sess->stats->pcpu_stats objects are freed
when sysfs entry is removed. If something wrong happens and
session is closed before sysfs entry is created,
sess->stats and sess->stats->pcpu_stats objects are not freed.

This patch adds freeing of them at three places:
1. When client uses wrong address and session creation fails.
2. When client fails to create a sysfs entry.
3. When client adds wrong address via sysfs add_path.

Fixes: 215378b838df0 ("RDMA/rtrs: client: sysfs interface functions")
Link: https://lore.kernel.org/r/20210528113018.52290-21-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Check if the queue_depth has changed during a reconnection

[ Upstream commit 5b73b799c25c68a4703cd6c5ac4518006d9865b8 ]

The queue_depth is a module parameter for rtrs_server. It is used on the
client side to determing the queue_depth of the request queue for the RNBD
virtual block device.

During a reconnection event for an already mapped device, in case the
rtrs_server module queue_depth has changed, fail the reconnect attempt.

Also stop further auto reconnection attempts. A manual reconnect via
sysfs has to be triggerred.

Fixes: 6a98d71daea18 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210528113018.52290-20-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Fix memory leak when having multiple sessions

[ Upstream commit 6bb97a2c1aa5278a30d49abb6186d50c34c207e2 ]

Gioh notice memory leak below
unreferenced object 0xffff8880acda2000 (size 2048):
  comm "kworker/4:1", pid 77, jiffies 4295062871 (age 1270.730s)
  hex dump (first 32 bytes):
    00 20 da ac 80 88 ff ff 00 20 da ac 80 88 ff ff  . ....... ......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000e85d85b5>] rtrs_srv_rdma_cm_handler+0x8e5/0xa90 [rtrs_server]
    [<00000000e31a988a>] cma_ib_req_handler+0xdc5/0x2b50 [rdma_cm]
    [<000000000eb02c5b>] cm_process_work+0x2d/0x100 [ib_cm]
    [<00000000e1650ca9>] cm_req_handler+0x11bc/0x1c40 [ib_cm]
    [<000000009c28818b>] cm_work_handler+0xe65/0x3cf2 [ib_cm]
    [<000000002b53eaa1>] process_one_work+0x4bc/0x980
    [<00000000da3499fb>] worker_thread+0x78/0x5c0
    [<00000000167127a4>] kthread+0x191/0x1e0
    [<0000000060802104>] ret_from_fork+0x3a/0x50
unreferenced object 0xffff88806d595d90 (size 8):
  comm "kworker/4:1H", pid 131, jiffies 4295062972 (age 1269.720s)
  hex dump (first 8 bytes):
    62 6c 61 00 6b 6b 6b a5                          bla.kkk.
  backtrace:
    [<000000004447d253>] kstrdup+0x2e/0x60
    [<0000000047259793>] kobject_set_name_vargs+0x2f/0xb0
    [<00000000c2ee3bc8>] dev_set_name+0xab/0xe0
    [<000000002b6bdfb1>] rtrs_srv_create_sess_files+0x260/0x290 [rtrs_server]
    [<0000000075d87bd7>] rtrs_srv_info_req_done+0x71b/0x960 [rtrs_server]
    [<00000000ccdf1bb5>] __ib_process_cq+0x94/0x100 [ib_core]
    [<00000000cbcb60cb>] ib_cq_poll_work+0x32/0xc0 [ib_core]
    [<000000002b53eaa1>] process_one_work+0x4bc/0x980
    [<00000000da3499fb>] worker_thread+0x78/0x5c0
    [<00000000167127a4>] kthread+0x191/0x1e0
    [<0000000060802104>] ret_from_fork+0x3a/0x50
unreferenced object 0xffff88806d6bb100 (size 256):
  comm "kworker/4:1H", pid 131, jiffies 4295062972 (age 1269.720s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 00 59 4d 86 ff ff ff ff  .........YM.....
  backtrace:
    [<00000000a18a11e4>] device_add+0x74d/0xa00
    [<00000000a915b95f>] rtrs_srv_create_sess_files.cold+0x49/0x1fe [rtrs_server]
    [<0000000075d87bd7>] rtrs_srv_info_req_done+0x71b/0x960 [rtrs_server]
    [<00000000ccdf1bb5>] __ib_process_cq+0x94/0x100 [ib_core]
    [<00000000cbcb60cb>] ib_cq_poll_work+0x32/0xc0 [ib_core]
    [<000000002b53eaa1>] process_one_work+0x4bc/0x980
    [<00000000da3499fb>] worker_thread+0x78/0x5c0
    [<00000000167127a4>] kthread+0x191/0x1e0
    [<0000000060802104>] ret_from_fork+0x3a/0x50

The problem is we increase device refcount by get_device in process_info_req
for each path, but only does put_deice for last path, which lead to
memory leak.

To fix it, it also calls put_device when dev_ref is not 0.

Fixes: e2853c49477d1 ("RDMA/rtrs-srv-sysfs: fix missing put_device")
Link: https://lore.kernel.org/r/20210528113018.52290-19-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Fix memory leak of unfreed rtrs_srv_stats object

[ Upstream commit 2371c40354509746e4a4dad09a752e027a30f148 ]

When closing a session, currently the rtrs_srv_stats object in the
closing session is freed by kobject release. But if it failed
to create a session by various reasons, it must free the rtrs_srv_stats
object directly because kobject is not created yet.

This problem is found by kmemleak as below:

1. One client machine maps /dev/nullb0 with session name 'bla':
root@test1:~# echo "sessname=bla path=ip:192.168.122.190 \
device_path=/dev/nullb0" > /sys/devices/virtual/rnbd-client/ctl/map_device

2. Another machine failed to create a session with the same name 'bla':
root@test2:~# echo "sessname=bla path=ip:192.168.122.190 \
device_path=/dev/nullb1" > /sys/devices/virtual/rnbd-client/ctl/map_device
-bash: echo: write error: Connection reset by peer

3. The kmemleak on server machine reported an error:
unreferenced object 0xffff888033cdc800 (size 128):
  comm "kworker/2:1", pid 83, jiffies 4295086585 (age 2508.680s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000a72903b2>] __alloc_sess+0x1d4/0x1250 [rtrs_server]
    [<00000000d1e5321e>] rtrs_srv_rdma_cm_handler+0xc31/0xde0 [rtrs_server]
    [<00000000bb2f6e7e>] cma_ib_req_handler+0xdc5/0x2b50 [rdma_cm]
    [<00000000e896235d>] cm_process_work+0x2d/0x100 [ib_cm]
    [<00000000b6866c5f>] cm_req_handler+0x11bc/0x1c40 [ib_cm]
    [<000000005f5dd9aa>] cm_work_handler+0xe65/0x3cf2 [ib_cm]
    [<00000000610151e7>] process_one_work+0x4bc/0x980
    [<00000000541e0f77>] worker_thread+0x78/0x5c0
    [<00000000423898ca>] kthread+0x191/0x1e0
    [<000000005a24b239>] ret_from_fork+0x3a/0x50

Fixes: 39c2d639ca183 ("RDMA/rtrs-srv: Set .release function for rtrs srv device during device init")
Link: https://lore.kernel.org/r/20210528113018.52290-18-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs: Do not reset hb_missed_max after re-connection

[ Upstream commit 64bce1ee978491a779eb31098b21c57d4e431d6a ]

When re-connecting, it resets hb_missed_max to 0.
Before the first re-connecting, client will trigger re-connection
when it gets hb-ack more than 5 times. But after the first
re-connecting, clients will do re-connection whenever it does
not get hb-ack because hb_missed_max is 0.

There is no need to reset hb_missed_max when re-connecting.
hb_missed_max should be kept until closing the session.

Fixes: c0894b3ea69d3 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20210528113018.52290-16-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats

[ Upstream commit 41db63a7efe1c8c2dd282c1849a6ebfbbedbaf67 ]

When get_next_path_min_inflight is called to select the next path, it
iterates over the list of available rtrs_clt_sess (paths). It then reads
the number of inflight IOs for that path to select one which has the least
inflight IO.

But it may so happen that rtrs_clt_sess (path) is no longer in the
connected state because closing or error recovery paths can change the status
of the rtrs_clt_Sess.

For example, the client sent the heart-beat and did not get the
response, it would change the session status and stop IO processing.
The added checking of this patch can prevent accessing the broken path
and generating duplicated error messages.

It is ok if the status is changed after checking the status because
the error recovery path does not free memory and only tries to
reconnection. And also it is ok if the session is closed after checking
the status because closing the session changes the session status and
flush all IO beforing free memory. If the session is being accessed for
IO processing, the closing session will wait.

Fixes: 6a98d71daea18 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210528113018.52290-13-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srp: Fix a recently introduced memory leak

[ Upstream commit 7ec2e27a3afff64c96bfe7a77685c33619db84be ]

Only allocate a memory registration list if it will be used and if it will
be freed.

Link: https://lore.kernel.org/r/20210524041211.9480-5-bvanassche@acm.org
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Fixes: f273ad4f8d90 ("RDMA/srp: Remove support for FMR memory registration")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: generate subflow hmac after mptcp_finish_join()

[ Upstream commit 0a4d8e96e4fd687af92b961d5cdcea0fdbde05fe ]

For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().

Fixes: ec3edaa7ca6c ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: fix pr_debug in mptcp_token_new_connect

[ Upstream commit 2f1af441fd5dd5caf0807bb19ce9bbf9325ce534 ]

After commit 2c5ebd001d4f ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:

MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0

Move pr_debug() after mptcp_crypto_key_gen_sha().

Fixes: 2c5ebd001d4f ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: cdn-dp: fix sign extension on an int multiply for a u64 result

[ Upstream commit ce0cb93a5adb283f577cd4661f511047b5e39028 ]

The variable bit_per_pix is a u8 and is promoted in the multiplication
to an int type and then sign extended to a u64. If the result of the
int multiplication is greater than 0x7fffffff then the upper 32 bits will
be set to 1 as a result of the sign extension. Avoid this by casting
tu_size_reg to u64 to avoid sign extension and also a potential overflow.

Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915162049.36434-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: lvds: Fix an error handling path

[ Upstream commit 3dfa159f6b0c054eb63673fbf643a5f2cc862e63 ]

'ret' is know to be 0 a this point. Checking the return value of
'phy_init()' and 'phy_set_mode()' was intended instead.

So add the missing assignments.

Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/248220d4815dc8c8088cebfab7d6df5f70518438.1619881852.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: dsi: move all lane config except LCDC mux to bind()

[ Upstream commit 43c2de1002d2b70fb5941fa14e97a34e3dc214d4 ]

When we first enable the DSI encoder, we currently program some per-chip
configuration that we look up in rk3399_chip_data based on the device
tree compatible we match. This data configures various parameters of the
MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a
dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan
out from.

This causes a problem in RK3399 dual-mode configurations, though: panel
prepare() callbacks run before the encoder gets enabled and expect to be
able to write commands to the DSI bus, but the bus isn't fully
functional until the lane and master/slave configuration have been
programmed. As a result, dual-mode panels (and possibly others too) fail
to turn on when the rockchipdrm driver is initially loaded.

Because the LCDC mux is the only thing we don't know until enable time
(and is the only thing that can ever change), we can actually move most
of the initialization to bind() and get it out of the way early. That's
what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(),
which also avoids the issue, but bind() seems like the more correct
place to me.)

Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a
Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's
backlight would turn on but no image would appear when initially loading
rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver,
it would come on. With this change, the panel successfully turns on
during initial rockchipdrm load as expected.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/55fe7f3454d8c91dc3837ba5aa741d4a0e67378f.1618797813.git.tommyhebb@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()

[ Upstream commit ae41d925c75b53798f289c69ee8d9f7d36432f6d ]

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling regmap_write() failed.

Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519134928.2696617-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: rockchip: set alpha_en to 0 if it is not used

[ Upstream commit 046e0db975695540c9d9898cdbf0b60533d28afb ]

alpha_en should be set to 0 if it is not used, i.e. to disable alpha
blending if it was enabled before and should be disabled now.

Fixes: 2aae8ed1f390 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-6-knaerzche@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ftgmac100: add missing error return code in ftgmac100_probe()

[ Upstream commit 52af13a41489d7bbc1932d17583eff6e5fffc820 ]

The variables will be free on path err_phy_connect, it should
return error code, or it will cause double free when calling
ftgmac100_remove().

Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: g12a: fix gp0 and hifi ranges

[ Upstream commit bc794f8c56abddf709f1f84fcb2a3c9e7d9cc9b4 ]

While some SoC samples are able to lock with a PLL factor of 55, others
samples can't. ATM, a minimum of 60 appears to work on all the samples
I have tried.

Even with 60, it sometimes takes a long time for the PLL to eventually
lock. The documentation says that the minimum rate of these PLLs DCO
should be 3GHz, a factor of 125. Let's use that to be on the safe side.

With factor range changed, the PLL seems to lock quickly (enough) so far.
It is still unclear if the range was the only reason for the delay.

Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429090325.60970-1-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: ns: Fix error return code in qrtr_ns_init()

[ Upstream commit a49e72b3bda73d36664a084e47da9727a31b8095 ]

Fix to return a negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: c6e08d6251f3 ("net: qrtr: Allocate workqueue before kernel_bind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Fix cpu updates of coherent multisample surfaces

[ Upstream commit 88509f698c4e38e287e016e86a0445547824135c ]

In cases where the dirty linear memory range spans multiple sample sheets
in a surface, the dirty surface region is incorrectly computed.
To do this correctly and in an optimized fashion we would have to compute
the dirty region of each sample sheet and compute the union of those
regions.

But assuming that cpu writing to a multisample surface is rather a corner
case than a common case, just set the dirty region to the full surface.

This fixes OpenGL piglit errors with SVGA_FORCE_COHERENT=1
and the piglit test:

fbo-depthstencil blit default_fb -samples=2 -auto

Fixes: 9ca7d19ff8ba ("drm/vmwgfx: Add surface dirty-tracking callbacks")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-4-zackr@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Mark a surface gpu-dirty after the SVGA3dCmdDXGenMips command

[ Upstream commit 75156a887b6cea6e09d83ec19f4ebfd7c86265f0 ]

The SVGA3dCmdDXGenMips command uses a shader-resource view to access
the underlying surface. Normally accesses using that view-type are not
dirtying the underlying surface, but that particular command is an
exception.
Mark the surface gpu-dirty after a SVGA3dCmdDXGenMips command has been
submitted.

This fixes the piglit getteximage-formats test run with
SVGA_FORCE_COHERENT=1

Fixes: a9f58c456e9d ("drm/vmwgfx: Be more restrictive when dirtying resources")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-3-zackr@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilities

[ Upstream commit 702a5fa2fe4d7e7f28fed92a170b540acfff9d34 ]

Hence remove the SH_PFC_PIN_CFG_PULL_DOWN flags from their pin
descriptions.

Fixes: 83f6941a42a5e773 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/da4b2d69955840a506412f1e8099607a0da97ecc.1619785375.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: r8a7796: Add missing bias for PRESET# pin

[ Upstream commit 2cee31cd49733e89dfedf4f68a56839fc2e42040 ]

R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added
the configuration bit for bias pull-down control for the PRESET# pin on
R-Car M3-W. Add driver support for controlling pull-down on this pin.

Fixes: 2d40bd24274d2577 ("pinctrl: sh-pfc: r8a7796: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/c479de5b3f235c2f7d5faea9e7e08e6fccb135df.1619785375.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: pch_gbe: Propagate error from devm_gpio_request_one()

[ Upstream commit 9e3617a7b84512bf96c04f9cf82d1a7257d33794 ]

If GPIO controller is not available yet we need to defer
the probe of GBE until provider will become available.

While here, drop GPIOF_EXPORT because it's deprecated and
may not be available.

Fixes: f1a26fdf5944 ("pch_gbe: Add MinnowBoard support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvpp2: Put fwnode in error case during ->probe()

[ Upstream commit 71f0891c84dfdc448736082ab0a00acd29853896 ]

In each iteration fwnode_for_each_available_child_node() bumps a reference
counting of a loop variable followed by dropping in on a next iteration,

Since in error case the loop is broken, we have to drop a reference count
by ourselves. Do it for port_fwnode in error case during ->probe().

Fixes: 248122212f68 ("net: mvpp2: use device_*/fwnode_* APIs instead of of_*")
Cc: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: imxfb: Fix an error message

[ Upstream commit 767d724a160eb1cd00c86fb8c2e21fa1ab3c37ac ]

'ret' is known to be 0 here.
No error code is available, so just remove it from the error message.

Fixes: 72330b0eeefc ("i.MX Framebuffer: Use readl/writel instead of direct pointer deref")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d7b25026f82659da3c6f7159eea480faa9d738be.1620327302.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ast: Fix missing conversions to managed API

[ Upstream commit 9ea172a9a3f4a7c5e876469509fc18ddefc7d49d ]

The commit 7cbb93d89838 ("drm/ast: Use managed pci functions")
converted a few PCI accessors to the managed API and dropped the
manual pci_iounmap() calls, but it seems to have forgotten converting
pci_iomap() to the managed one. It resulted in the leftover resources
after the driver unbind. Let's fix them.

Fixes: 7cbb93d89838 ("drm/ast: Use managed pci functions")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421170458.21178-1-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/dc: Fix a missing check bug in dm_dp_mst_detect()

[ Upstream commit 655c0ed19772d92c9665ed08bdc5202acc096dda ]

In dm_dp_mst_detect(), We should check whether or not @connector
has been unregistered from userspace. If the connector is unregistered,
we should return disconnected status.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Yingjie Wang <wangyingjie55@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()

[ Upstream commit bab5cca7e609952b069a550e39fe4893149fb658 ]

The drm_bridge_chain_pre_enable() is not the proper opposite of
drm_bridge_chain_post_disable(). It continues along the chain to
_before_ the starting bridge. Let's fix that.

Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge/sii8620: fix dependency on extcon

[ Upstream commit 08319adbdde15ef7cee1970336f63461254baa2a ]

The DRM_SIL_SII8620 kconfig has a weak `imply` dependency
on EXTCON, which causes issues when sii8620 is built
as a builtin and EXTCON is built as a module.

The symptoms are 'undefined reference' errors caused
by the symbols in EXTCON not being available
to the sii8620 driver.

Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: xfrm_state_mtu should return at least 1280 for ipv6

[ Upstream commit b515d2637276a3810d6595e10ab02c13bfd0b63a ]

Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.

We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.

Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.

Fixes: 91657eafb64b ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/page_alloc: fix counting of managed_pages

[ Upstream commit f7ec104458e00d27a190348ac3a513f3df3699a4 ]

commit f63661566fad ("mm/page_alloc.c: clear out zone->lowmem_reserve[] if
the zone is empty") clears out zone->lowmem_reserve[] if zone is empty.
But when zone is not empty and sysctl_lowmem_reserve_ratio[i] is set to
zero, zone_managed_pages(zone) is not counted in the managed_pages either.
This is inconsistent with the description of lowmem_reserve, so fix it.

Link: https://lkml.kernel.org/r/20210527125707.3760259-1-liushixin2@huawei.com
Fixes: f63661566fad ("mm/page_alloc.c: clear out zone->lowmem_reserve[] if the zone is empty")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: page_alloc: refactor setup_per_zone_lowmem_reserve()

[ Upstream commit 470c61d70299b1826f56ff5fede10786798e3c14 ]

setup_per_zone_lowmem_reserve() iterates through each zone setting
zone->lowmem_reserve[j] = 0 (where j is the zone's index) then iterates
backwards through all preceding zones, setting
lower_zone->lowmem_reserve[j] = sum(managed pages of higher zones) /
lowmem_reserve_ratio[idx] for each (where idx is the lower zone's index).

If the lower zone has no managed pages or its ratio is 0 then all of its
lowmem_reserve[] entries are effectively zeroed.

As these arrays are only assigned here and all lowmem_reserve[] entries
for index < this zone's index are implicitly assumed to be 0 (as these are
specifically output in show_free_areas() and zoneinfo_show_print() for
example) there is no need to additionally zero index == this zone's index
too. This patch avoids zeroing unnecessarily.

Rather than iterating through zones and setting lowmem_reserve[j] for each
lower zone this patch reverse the process and populates each zone's
lowmem_reserve[] values in ascending order.

This clarifies what is going on especially in the case of zero managed
pages or ratio which is now explicitly shown to clear these values.

Link: https://lkml.kernel.org/r/20201129162758.115907-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: memcg/slab: properly set up gfp flags for objcg pointer array

[ Upstream commit 41eb5df1cbc9b302fc263ad7c9f38cfc38b4df61 ]

Patch series "mm: memcg/slab: Fix objcg pointer array handling problem", v4.

Since the merging of the new slab memory controller in v5.9, the page
structure stores a pointer to objcg pointer array for slab pages.  When
the slab has no used objects, it can be freed in free_slab() which will
call kfree() to free the objcg pointer array in
memcg_alloc_page_obj_cgroups().  If it happens that the objcg pointer
array is the last used object in its slab, that slab may then be freed
which may caused kfree() to be called again.

With the right workload, the slab cache may be set up in a way that allows
the recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system.  In fact, we have a reproducer that
can cause kernel stack overflow on a s390 system involving kmalloc-rcl-256
and kmalloc-rcl-128 slabs with the following kfree() loop recursively
called 74 times:

  [ 285.520739] [<000000000ec432fc>] kfree+0x4bc/0x560 [ 285.520740]
[<000000000ec43466>] __free_slab+0xc6/0x228 [ 285.520741]
[<000000000ec41fc2>] __slab_free+0x3c2/0x3e0 [ 285.520742]
[<000000000ec432fc>] kfree+0x4bc/0x560 : While investigating this issue, I
also found an issue on the allocation side.  If the objcg pointer array
happen to come from the same slab or a circular dependency linkage is
formed with multiple slabs, those affected slabs can never be freed again.

This patch series addresses these two issues by introducing a new set of
kmalloc-cg-<n> caches split from kmalloc-<n> caches.  The new set will
only contain non-reclaimable and non-dma objects that are accounted in
memory cgroups whereas the old set are now for unaccounted objects only.
By making this split, all the objcg pointer arrays will come from the
kmalloc-<n> caches, but those caches will never hold any objcg pointer
array.  As a result, deeply nested kfree() call and the unfreeable slab
problems are now gone.

This patch (of 4):

Since the merging of the new slab memory controller in v5.9, the page
structure may store a pointer to obj_cgroup pointer array for slab pages.
Currently, only the __GFP_ACCOUNT bit is masked off.  However, the array
is not readily reclaimable and doesn't need to come from the DMA buffer.
So those GFP bits should be masked off as well.

Do the flag bit clearing at memcg_alloc_page_obj_cgroups() to make sure
that it is consistently applied no matter where it is called.

Link: https://lkml.kernel.org/r/20210505200610.13943-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-2-longman@redhat.com
Fixes: 286e04b8ed7a ("mm: memcg/slab: allocate obj_cgroups for non-root slab pages")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/shmem: fix shmem_swapin() race with swapoff

[ Upstream commit 2efa33fc7f6ec94a3a538c1a264273c889be2b36 ]

When I was investigating the swap code, I found the below possible race
window:

CPU 1                                         CPU 2
-----                                         -----
shmem_swapin
  swap_cluster_readahead
    if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
                                              swapoff
                                                ..
                                                si->swap_file = NULL;
                                                ..
    struct inode *inode = si->swap_file->f_mapping->host;[oops!]

Close this race window by using get/put_swap_device() to guard against
concurrent swapoff.

Link: https://lkml.kernel.org/r/20210426123316.806267-5-linmiaohe@huawei.com
Fixes: 8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

swap: fix do_swap_page() race with swapoff

[ Upstream commit 2799e77529c2a25492a4395db93996e3dacd762d ]

When I was investigating the swap code, I found the below possible race
window:

CPU 1                                    CPU 2
-----                                    -----
do_swap_page
  if (data_race(si->flags & SWP_SYNCHRONOUS_IO)
  swap_readpage
    if (data_race(sis->flags & SWP_FS_OPS)) {
                                         swapoff
     ..
     p->swap_file = NULL;
     ..
    struct file *swap_file = sis->swap_file;
    struct address_space *mapping = swap_file->f_mapping;[oops!]

Note that for the pages that are swapped in through swap cache, this isn't
an issue. Because the page is locked, and the swap entry will be marked
with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
unlocked.

Fix this race by using get/put_swap_device() to guard against concurrent
swapoff.

Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com
Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/debug_vm_pgtable: ensure THP availability via has_transparent_hugepage()

[ Upstream commit 65ac1a60a57e2c55f2ac37f27095f6b012295e81 ]

On certain platforms, THP support could not just be validated via the
build option CONFIG_TRANSPARENT_HUGEPAGE. Instead
has_transparent_hugepage() also needs to be called upon to verify THP
runtime support. Otherwise the debug test will just run into unusable THP
helpers like in the case of a 4K hash config on powerpc platform [1].
This just moves all pfn_pmd() and pfn_pud() after THP runtime validation
with has_transparent_hugepage() which prevents the mentioned problem.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=213069

Link: https://lkml.kernel.org/r/1621397588-19211-1-git-send-email-anshuman.khandual@arm.com
Fixes: 787d563b8642 ("mm/debug_vm_pgtable: fix kernel crash by checking for THP support")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/debug_vm_pgtable/basic: iterate over entire protection_map[]

[ Upstream commit 2e326c07bbe1eabeece4047ab5972ef34b15679b ]

Currently the basic tests just validate various page table transformations
after starting with vm_get_page_prot(VM_READ|VM_WRITE|VM_EXEC) protection.
Instead scan over the entire protection_map[] for better coverage.  It
also makes sure that all these basic page table tranformations checks hold
true irrespective of the starting protection value for the page table
entry.  There is also a slight change in the debug print format for basic
tests to capture the protection value it is being tested with.  The
modified output looks something like

[pte_basic_tests          ]: Validating PTE basic ()
[pte_basic_tests          ]: Validating PTE basic (read)
[pte_basic_tests          ]: Validating PTE basic (write)
[pte_basic_tests          ]: Validating PTE basic (read|write)
[pte_basic_tests          ]: Validating PTE basic (exec)
[pte_basic_tests          ]: Validating PTE basic (read|exec)
[pte_basic_tests          ]: Validating PTE basic (write|exec)
[pte_basic_tests          ]: Validating PTE basic (read|write|exec)
[pte_basic_tests          ]: Validating PTE basic (shared)
[pte_basic_tests          ]: Validating PTE basic (read|shared)
[pte_basic_tests          ]: Validating PTE basic (write|shared)
[pte_basic_tests          ]: Validating PTE basic (read|write|shared)
[pte_basic_tests          ]: Validating PTE basic (exec|shared)
[pte_basic_tests          ]: Validating PTE basic (read|exec|shared)
[pte_basic_tests          ]: Validating PTE basic (write|exec|shared)
[pte_basic_tests          ]: Validating PTE basic (read|write|exec|shared)

This adds a missing argument 'struct mm_struct *' in pud_basic_tests()
test .  This never got exposed before as PUD based THP is available only
on X86 platform where mm_pmd_folded(mm) call gets macro replaced without
requiring the mm_struct i.e __is_defined(__PAGETABLE_PMD_FOLDED).

Link: https://lkml.kernel.org/r/1611137241-26220-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Reviewed-by: Steven Price <steven.price@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/debug_vm_pgtable/basic: add validation for dirtiness after write protect

[ Upstream commit bb5c47ced46797409f4791d0380db3116d93134c ]

Patch series "mm/debug_vm_pgtable: Some minor updates", v3.

This series contains some cleanups and new test suggestions from Catalin
from an earlier discussion.

https://lore.kernel.org/linux-mm/20201123142237.GF17833@gaia/

This patch (of 2):

This adds validation tests for dirtiness after write protect conversion
for each page table level.  There are two new separate test types involved
here.

The first test ensures that a given page table entry does not become dirty
after pxx_wrprotect().  This is important for platforms like arm64 which
transfers and drops the hardware dirty bit (!PTE_RDONLY) to the software
dirty bit while making it an write protected one.  This test ensures that
no fresh page table entry could be created with hardware dirty bit set.
The second test ensures that a given page table entry always preserve the
dirty information across pxx_wrprotect().

This adds two previously missing PUD level basic tests and while here
fixes pxx_wrprotect() related typos in the documentation file.

Link: https://lkml.kernel.org/r/1611137241-26220-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1611137241-26220-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>