review.tizen.org Git - platform/kernel/linux-starfive.git/log

Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The kernel now dynamically probes for misaligned access speed, as
   opposed to relying on a table of known implementations.

- Support for non-coherent devices on systems using the Andes AX45MP
   core, including the RZ/Five SoCs.

- Support for the V extension in ptrace(), again.

- Support for KASLR.

- Support for the BPF prog pack allocator in RISC-V.

- A handful of bug fixes and cleanups.

* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
  soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
  riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
  riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
  riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR
  RISC-V: Add ptrace support for vectors
  soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
  cache: Add L2 cache management for Andes AX45MP RISC-V core
  dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
  riscv: mm: dma-noncoherent: nonstandard cache operations support
  riscv: errata: Add Andes alternative ports
  riscv: asm: vendorid_list: Add Andes Technology to the vendors list
  ...

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"Mostly small stragglers that missed the initial merge.

  Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
  due to the volatile qualifier removal, fnic due to unused function
  removal and sd.c has a lot of code shuffling to remove forward
  declarations)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
  scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
  scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
  scsi: mpt3sas: Remove volatile qualifier
  scsi: mpt3sas: Perform additional retries if doorbell read returns 0
  scsi: libsas: Simplify sas_queue_reset() and remove unused code
  scsi: ufs: Fix the build for the old ARM OABI
  scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
  scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  scsi: fnic: Replace sgreset tag with max_tag_id
  scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
  scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
  scsi: smartpqi: Change driver version to 2.1.24-046
  scsi: smartpqi: Enhance error messages
  scsi: smartpqi: Enhance controller offline notification
  scsi: smartpqi: Enhance shutdown notification
  scsi: smartpqi: Simplify lun_number assignment
  scsi: smartpqi: Rename pciinfo to pci_info
  scsi: smartpqi: Rename MACRO to clarify purpose
  scsi: smartpqi: Add abort handler
  ...

Merge tag 'driver-core-6.6-rc1-2' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver symbol lookup fix from Greg KH:
"Here is one last fixup for your tree for 6.6-rc1. It resolves a
  problem with the way that symbol_get was changed in the module tree
  merge in your tree to fix up the DVB drivers which rely on this old
  api to attach new devices.

  As the changelog comment says:

    In commit 9011e49d54dc ("modules: only allow symbol_get of
    EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly
    restricted to GPL-only marked symbols. This interacts oddly with the
    DVB logic which only uses dvb_attach() to load the dvb driver which
    then uses symbol_get().

    Fix this up by properly marking all of the dvb_attach attach symbols
    as EXPORT_SYMBOL_GPL().

  This has been acked by Hans from the V4L driver side, Luis from the
  module side, Mauro on the media side, and Christoph said it was the
  correct solution, and was tested by the original reporter of the
  issue.

  It has passed 0-day testing, but has not been in linux-next due to it
  only being sent yesterday"

* tag 'driver-core-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  media: dvb: symbol fixup for dvb_attach()

Merge tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

- move a dma-debug call that prints a message out from a lock that's
   causing problems with the lock order in serial drivers (Sergey
   Senozhatsky)

- fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right
   dependency and not default to y (Christoph Hellwig)

- move an ifdef a bit to remove a __maybe_unused that seems to trip up
   some sensitivities (Christoph Hellwig)

- revert a bogus check in the CMA allocator (Zhenhua Huang)

* tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping:
  Revert "dma-contiguous: check for memory region overlap"
  dma-pool: remove a __maybe_unused label in atomic_pool_expand
  dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA
  dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock

Merge tag 'pci-v6.6-fixes-1' of git://git./linux/kernel/git/pci/pci

Pull PCI fixes from Bjorn Helgaas:

- Add PCI_DYNAMIC_OF_NODES dependency on OF_IRQ to fix sparc64 build
   error (Lizhi Hou)

- After coalescing host bridge resources, free any released resources
   to avoid a leak (Ross Lagerwall)

- Revert a quirk that prevented NVIDIA T4 GPUs from using Secondary Bus
   Reset. The quirk worked around an issue that we now think is related
   to the Root Port, not the GPU (Bjorn Helgaas)

* tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
  PCI: Free released resource after coalescing
  PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies

Merge tag 'ntb-6.6' of https://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
"Link toggling fixes and debugfs error path fixes"

[ And for everybody like me who always have to remind themselves what
  the TLA of the day is, and what NTB stands for - it's a PCIe
  "Non-Transparent Bridge" thing    - Linus ]

* tag 'ntb-6.6' of https://github.com/jonmason/ntb:
  ntb: Check tx descriptors outstanding instead of head/tail for tx queue
  ntb: Fix calculation ntb_transport_tx_free_entry()
  ntb: Drop packets when qp link is down
  ntb: Clean up tx tail index on link down
  ntb: amd: Drop unnecessary error check for debugfs_create_dir
  NTB: ntb_tool: Switch to memdup_user_nul() helper
  dtivers: ntb: fix parameter check in perf_setup_dbgfs()
  ntb: Remove error checking for debugfs_create_dir()

media: dvb: symbol fixup for dvb_attach()

In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols. This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().

Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().

Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd

Pull smb server update from Steve French:
"After two years, many fixes and much testing, ksmbd is no longer
experimental"

* tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd:
ksmbd: remove experimental warning

Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray

Pull xarray fixes from Matthew Wilcox:

- Fix a bug encountered by people using bittorrent where they'd get
   NULL pointer dereferences on page cache lookups when using XFS

- Two documentation fixes

* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
  idr: fix param name in idr_alloc_cyclic() doc
  xarray: Document necessary flag in alloc functions
  XArray: Do not return sibling entries from xa_load()

Merge tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- Fix null_blk polled IO timeout handling (Chengming)

- Regression fix for swapped arguments in drbd bvec_set_page()
   (Christoph)

- String length handling fix for s390 dasd (Heiko)

- Fixes for blk-throttle accounting (Yu)

- Fix page pinning issue for same page segments (Christoph)

- Remove redundant file_remove_privs() call (Christoph)

- Fix a regression in partition handling for devices not supporting
   partitions (Li)

* tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux:
  drbd: swap bvec_set_page len and offset
  block: fix pin count management when merging same-page segments
  null_blk: fix poll request timeout handling
  s390/dasd: fix string length handling
  block: don't add or resize partition on the disk with GENHD_FL_NO_PART
  block: remove the call to file_remove_privs in blkdev_write_iter
  blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
  blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
  blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative
  blk-throttle: print signed value 'carryover_bytes/ios' for user

Merge tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 6.6-rc merge window:

   - Fix for a regression this merge window caused by the SQPOLL
     affinity patch, where we can race with SQPOLL thread shutdown and
     cause an oops when trying to set affinity (Gabriel)

   - Fix for a regression this merge window where fdinfo reading with
     for a ring setup with IORING_SETUP_NO_SQARRAY will attempt to
     deference the non-existing SQ ring array (me)

   - Add the patch that allows more finegrained control over who can use
     io_uring (Matteo)

   - Locking fix for a regression added this merge window for IOPOLL
     overflow (Pavel)

   - IOPOLL fix for stable, breaking our loop if helper threads are
     exiting (Pavel)

  Also had a fix for unreaped iopoll requests from io-wq from Ming, but
  we found an issue with that and hence it got reverted. Will get this
  sorted for a future rc"

* tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux:
  Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()"
  io_uring: fix unprotected iopoll overflow
  io_uring: break out of iowq iopoll on teardown
  io_uring: add a sysctl to disable io_uring system-wide
  io_uring/fdinfo: only print ->sq_array[] if it's there
  io_uring: fix IO hang in io_wq_put_and_exit from do_exit()
  io_uring: Don't set affinity on a dying sqpoll thread

Merge tag 'thermal-6.6-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
"Eliminate an obsolete thermal zone registration function"

* tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Drop thermal_zone_device_register()
  thermal: Use thermal_tripless_zone_device_register()
  thermal: core: Add function for registering tripless thermal zones
  thermal: core: Clean up headers of thermal zone registration functions

Merge tag 'pm-6.6-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Fix an Intel RAPL power capping driver regression introduced during
the 6.5 development cycle (Srinivas Pandruvada)"

* tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix invalid setting of Power Limit 4

Merge tag 'gpio-fixes-for-v6.6-rc1' of git://git./linux/kernel/git/brgl/linux

Pull gpio fix from Bartosz Golaszewski:

- fix a regression in irqchip setup in gpio-zynq

* tag 'gpio-fixes-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks

Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"

This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83.

d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.

But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.

Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.

Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Merge tag 'sound-fix-6.6-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.

   - The corrections of the previous PCM iov_iter transitions

   - Regression fixes in MIDI 2.0 / USB changes

   - Various ASoC codec fixes for Cirrus, Realtek, WCD

   - ASoC AMD quirks and ASoC Intel AVS driver workaround"

* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek - ALC287 I2S speaker platform support
  ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
  ASoC: Intel: avs: Provide support for fallback topology
  ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
  ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
  ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
  ASoC: rt5645: NULL pointer access when removing jack
  ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
  MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
  ALSA: sb: Fix wrong argument in commented code
  ALSA: pcm: Fix error checks of default read/write copy ops
  ASoC: Name iov_iter argument as iterator instead of buffer
  ASoC: dmaengine: Drop unused iov_iter for process callback
  ALSA: hda/tas2781: Use standard clamp() macro
  ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
  ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
  ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
  ASoC: cs35l45: Rename DACPCM1 Source control
  ASoC: cs35l45: Fix "Dead assigment" warning
  ASoC: cs35l45: Add support for Chip ID 0x35A460
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"The main one is a fix for a broken strscpy() conversion that landed in
  the merge window and broke early parsing of the kernel command line.

   - Fix an incorrect mask in the CXL PMU driver

   - Fix a regression in early parsing of the kernel command line

   - Fix an IP checksum OoB access reported by syzbot"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: csum: Fix OoB access in IP checksum code for negative lengths
  arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
  perf: CXL: fix mismatched number of counters mask

Merge tag 'loongarch-6.6' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

- Allow usage of LSX/LASX in the kernel, and use them for
   SIMD-optimized RAID5/RAID6 routines

- Add Loongson Binary Translation (LBT) extension support

- Add basic KGDB & KDB support

- Add building with kcov coverage

- Add KFENCE (Kernel Electric-Fence) support

- Add KASAN (Kernel Address Sanitizer) support

- Some bug fixes and other small changes

- Update the default config file

* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add KASAN (Kernel Address Sanitizer) support
  LoongArch: Simplify the processing of jumping new kernel for KASLR
  kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
  kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
  LoongArch: Add KFENCE (Kernel Electric-Fence) support
  LoongArch: Get partial stack information when providing regs parameter
  LoongArch: mm: Add page table mapped mode support for virt_to_page()
  kfence: Defer the assignment of the local variable addr
  LoongArch: Allow building with kcov coverage
  LoongArch: Provide kaslr_offset() to get kernel offset
  LoongArch: Add basic KGDB & KDB support
  LoongArch: Add Loongson Binary Translation (LBT) extension support
  raid6: Add LoongArch SIMD recovery implementation
  raid6: Add LoongArch SIMD syndrome calculation
  LoongArch: Add SIMD-optimized XOR routines
  LoongArch: Allow usage of LSX/LASX in the kernel
  LoongArch: Define symbol 'fault' as a local label in fpu.S
  LoongArch: Adjust {copy, clear}_user exception handler behavior
  LoongArch: Use static defined zero page rather than allocated
  ...

Merge tag 'printk-for-6.6-fixup' of git://git./linux/kernel/git/printk/linux

Pull printk fix from Petr Mladek:

- Revert exporting symbols needed for dumping the raw printk buffer in
   panic().

   I pushed the export prematurely before the user was ready for merging
   into the mainline.

* tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  Revert "printk: export symbols for debug modules"

Merge tag 'landlock-6.6-rc1' of git://git./linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"

* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by

soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met

To prevent randconfig build issues when enabling the RZ/Five SoC, consider
selecting specific configurations only when their dependencies are
satisfied.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901110936.313171-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config

Andes errata uses sbi_ecalll() which is only available if RISCV_SBI is
enabled. So add an dependency for RISCV_SBI in ERRATA_ANDES config to
avoid any build failures.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230901110320.312674-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config

Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP
ie only if MMU is enabled, we no longer need the MMU dependency in
ERRATA_ANDES_CMO config.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled

kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside
an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of
pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block.
So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT
config.

This avoids users to explicitly select MMU.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "bpf, riscv: use BPF prog pack allocator in BPF JIT"

Puranjay Mohan <puranjay12@gmail.com> says:

Here is some data to prove the V2 fixes the problem:

Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m47.562s
user    0m24.145s
sys     6m37.064s

With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m29.472s
user    0m25.865s
sys     6m18.401s

BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.

Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.

I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.

This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.

======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================

Test setup:
===========

Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1

To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.

The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.

The script was run with following perf command:
./run.sh "perf stat -a \
        -e iTLB-load-misses \
        -e dTLB-load-misses  \
        -e dTLB-store-misses \
        -e instructions \
        --timeout 60000"

The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.

The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.

Results
=======

Before enabling prog pack allocator:
------------------------------------

Performance counter stats for 'system wide':

           4939048      iTLB-load-misses
           5468689      dTLB-load-misses
            465234      dTLB-store-misses
     1441082097998      instructions

      60.045791200 seconds time elapsed

After enabling prog pack allocator:
-----------------------------------

Performance counter stats for 'system wide':

           3430035      iTLB-load-misses
           5008745      dTLB-load-misses
            409944      dTLB-store-misses
     1441535637988      instructions

      60.046296600 seconds time elapsed

Improvements in metrics
=======================

It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.

--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------

I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.

This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs

[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards

* b4-shazam-merge:
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable

Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: Introduce KASLR"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

The following KASLR implementation allows to randomize the kernel mapping:

- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
  provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
  hence the patch 3 factorizes KASLR related functions for riscv to take
  advantage.

The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.

* b4-shazam-merge:
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR

Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch "RISC-V: Add ptrace support for vectors"

This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.

* b4-shazam-merge:
RISC-V: Add ptrace support for vectors

Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "Add non-coherent DMA support for AX45MP"

Prabhakar <prabhakar.csengg@gmail.com> says:

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

non-coherent DMA support for AX45MP
====================================

On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:

1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.

Below are the configs which Andes port provides (and are selected by
RZ/Five):
      - ERRATA_ANDES
      - ERRATA_ANDES_CMO

OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.

2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.

Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.

    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.

3] We provide callbacks to synchronize specific content between memory and
cache.

4] RZ/Five SoC selects the below configs
        - AX45MP_L2_CACHE
        - DMA_GLOBAL_POOL
        - ERRATA_ANDES
        - ERRATA_ANDES_CMO

----------x---------------------x--------------------x---------------x----

* b4-shazam-merge:
  soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
  cache: Add L2 cache management for Andes AX45MP RISC-V core
  dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
  riscv: mm: dma-noncoherent: nonstandard cache operations support
  riscv: errata: Add Andes alternative ports
  riscv: asm: vendorid_list: Add Andes Technology to the vendors list

Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: dma-mapping: unify support for cache flushes"

Prabhakar <prabhakar.csengg@gmail.com> says:

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

This patch series is a subset from Arnd's original series [0]. Ive just
picked up the bits required for RISC-V unification of cache flushing.
Remaining patches from the series [0] will be taken care by Arnd soon.

* b4-shazam-merge:
  riscv: dma-mapping: switch over to generic implementation
  riscv: dma-mapping: skip invalidation before bidirectional DMA
  riscv: dma-mapping: only invalidate after DMA, not flush

Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "RISC-V: Probe for misaligned access speed"

Evan Green <evan@rivosinc.com> says:

The current setting for the hwprobe bit indicating misaligned access
speed is controlled by a vendor-specific feature probe function. This is
essentially a per-SoC table we have to maintain on behalf of each vendor
going forward. Let's convert that instead to something we detect at
runtime.

We have two assembly routines at the heart of our probe: one that
does a bunch of word-sized accesses (without aligning its input buffer),
and the other that does byte accesses. If we can move a larger number of
bytes using misaligned word accesses than we can with the same amount of
time doing byte accesses, then we can declare misaligned accesses as
"fast".

The tradeoff of reducing this maintenance burden is boot time. We spend
4-6 jiffies per core doing this measurement (0-2 on jiffie edge
alignment, and 4 on measurement). The timing loop was based on
raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number
of algorithms). By taking only the fastest iteration out of all
attempts for use in the comparison, variance between runs is very low.
On my THead C906, it looks like this:

[    0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast

Several others have chimed in with results on slow machines with the
older algorithm, which took all runs into account, including noise like
interrupts. Even with this variation, results indicate that in all cases
(fast, slow, and emulated) the measured numbers are nowhere near each
other (always multiple factors away).

* b4-shazam-merge:
  RISC-V: alternative: Remove feature_probe_func
  RISC-V: Probe for unaligned access speed

Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Revert "dma-contiguous: check for memory region overlap"

This reverts commit 3fa6456ebe13adab3ba1817c8e515a5b88f95dce.

The Commit broke the CMA region creation through DT on arm64,
as showed below logs with "memblock=debug":
[    0.000000] memblock_phys_alloc_range: 41943040 bytes align=0x200000
from=0x0000000000000000 max_addr=0x00000000ffffffff
early_init_dt_alloc_reserved_memory_arch+0x34/0xa0
[    0.000000] memblock_reserve: [0x00000000fd600000-0x00000000ffdfffff]
memblock_alloc_range_nid+0xc0/0x19c
[    0.000000] Reserved memory: overlap with other memblock reserved region

>From call flow, region we defined in DT was always reserved before entering
into rmem_cma_setup. Also, rmem_cma_setup has one routine cma_init_reserved_mem
to ensure the region was reserved. Checking the region not reserved here seems
not correct.

early_init_fdt_scan_reserved_mem:
    fdt_scan_reserved_mem
        __reserved_mem_reserve_reg
early_init_dt_reserve_memory
memblock_reserve(using “reg” prop case)
        fdt_init_reserved_mem
__reserved_mem_alloc_size
*early_init_dt_alloc_reserved_memory_arch*
memblock_reserve(dynamic alloc case)
        __reserved_mem_init_node
rmem_cma_setup(region overlap check here should always fail)

Example DT can be used to reproduce issue:

    dump_mem: mem_dump_region {
            compatible = "shared-dma-pool";
            alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
            reusable;
            size = <0 0x2800000>;
    };

Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>

Merge tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular rounds of rc1 fixes, a large bunch for amdgpu since it's three
  weeks in one go, one i915, one nouveau and one ivpu.

  I think there might be a few more fixes in misc that I haven't pulled
  in yet, but we should get them all for rc2.

  amdgpu:
   - Display replay fixes
   - Fixes for headless boards
   - Fix documentation breakage
   - RAS fixes
   - Handle newer IP discovery tables
   - SMU 13.0.6 fixes
   - SR-IOV fixes
   - Display vstartup fixes
   - NBIO 7.9 fixes
   - Display scaling mode fixes
   - Debugfs power reporting fix
   - GC 9.4.3 fixes
   - Dirty framebuffer fixes for fbcon
   - eDP fixes
   - DCN 3.1.5 fix
   - Display ODM fixes
   - GPU core dump fix
   - Re-enable zops property now that IGT test is fixed
   - Fix possible UAF in CS code
   - Cursor degamma fix

  amdkfd:
   - HMM fixes
   - Interrupt masking fix
   - GFX11 MQD fixes

  i915:
   - Mark requests for GuC virtual engines to avoid use-after-free

  nouveau:
   - Fix fence state in nouveau_fence_emit()

  ivpu:
   - replace strncpy"

* tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm: (51 commits)
  drm/amdgpu: Restrict bootloader wait to SMUv13.0.6
  drm/amd/display: prevent potential division by zero errors
  drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma
  drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1
  Revert "drm/amd/display: Remove v_startup workaround for dcn3+"
  drm/amdgpu: fix amdgpu_cs_p1_user_fence
  Revert "Revert "drm/amd/display: Implement zpos property""
  drm/amdkfd: Add missing gfx11 MQD manager callbacks
  drm/amdgpu: Free ras cmd input buffer properly
  drm/amdgpu: Hide xcp partition sysfs under SRIOV
  drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ setting
  drm/amdkfd: use mask to get v9 interrupt sq data bits correctly
  drm/amdgpu: Allocate coredump memory in a nonblocking way
  drm/amdgpu: Support query ecc cap for aqua_vanjaram
  drm/amdgpu: Add umc_info v4_0 structure
  drm/amd/display: always switch off ODM before committing more streams
  drm/amd/display: Remove wait while locked
  drm/amd/display: update blank state on ODM changes
  drm/amd/display: Add smu write msg id fail retry process
  drm/amdgpu: Add SMU v13.0.6 default reset methods
  ...

Merge tag 'net-6.6-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.

  Current release - regressions:

   - eth: stmmac: fix failure to probe without MAC interface specified

  Current release - new code bugs:

   - docs: netlink: fix missing classic_netlink doc reference

  Previous releases - regressions:

   - deal with integer overflows in kmalloc_reserve()

   - use sk_forward_alloc_get() in sk_get_meminfo()

   - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc

   - fib: avoid warn splat in flow dissector after packet mangling

   - skb_segment: call zero copy functions before using skbuff frags

   - eth: sfc: check for zero length in EF10 RX prefix

  Previous releases - always broken:

   - af_unix: fix msg_controllen test in scm_pidfd_recv() for
     MSG_CMSG_COMPAT

   - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()

   - netfilter:
      - nft_exthdr: fix non-linear header modification
      - xt_u32, xt_sctp: validate user space input
      - nftables: exthdr: fix 4-byte stack OOB write
      - nfnetlink_osf: avoid OOB read
      - one more fix for the garbage collection work from last release

   - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

   - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t

   - handshake: fix null-deref in handshake_nl_done_doit()

   - ip: ignore dst hint for multipath routes to ensure packets are
     hashed across the nexthops

   - phy: micrel:
      - correct bit assignments for cable test errata
      - disable EEE according to the KSZ9477 errata

  Misc:

   - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations

   - Revert "net: macsec: preserve ingress frame ordering", it appears
     to have been developed against an older kernel, problem doesn't
     exist upstream"

* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
  Revert "net: team: do not use dynamic lockdep key"
  net: hns3: remove GSO partial feature bit
  net: hns3: fix the port information display when sfp is absent
  net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
  net: hns3: fix debugfs concurrency issue between kfree buffer and read
  net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
  net: hns3: Support query tx timeout threshold by debugfs
  net: hns3: fix tx timeout issue
  net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  ...

Merge tag 'devicetree-fixes-for-6.6-1' of git://git./linux/kernel/git/robh/linux

Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
  and one fix:

   - Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
     schema

   - Merge Omnivision OV5695 into OV5693 binding

   - Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"

* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
  media: dt-bindings: Convert Omnivision OV7251 to DT schema
  media: dt-bindings: Merge OV5695 into OV5693 binding
  of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY

Merge tag 'pwm/for-6.6-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"

* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
  pwm: lpc32xx: Remove handling of PWM channels
  pwm: atmel: Simplify using devm functions
  dt-bindings: pwm: brcm,kona-pwm: convert to YAML
  pwm: stmpe: Handle errors when disabling the signal
  pwm: stm32: Simplify using devm_pwmchip_add()
  pwm: stm32: Don't modify HW state in .remove() callback
  pwm: Fix order of freeing resources in pwmchip_remove()
  pwm: ntxec: Use device_set_of_node_from_dev()
  pwm: ntxec: Drop a write-only variable from driver data
  pwm: pxa: Don't reimplement of_device_get_match_data()
  pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
  pwm: atmel-tcb: Don't track polarity in driver data
  pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
  pwm: atmel-tcb: Put per-channel data into driver data
  pwm: atmel-tcb: Fix resource freeing in error path and remove
  pwm: atmel-tcb: Harmonize resource allocation order
  pwm: Drop unused #include <linux/radix-tree.h>
  pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
  pwm: Remove outdated documentation for pwmchip_remove()
  pwm: atmel: Enable clk when pwm already enabled in bootloader
  ...

Merge tag 'amd-drm-fixes-6.6-2023-09-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.6-2023-09-06:

amdgpu:
- Display replay fixes
- Fixes for headless boards
- Fix documentation breakage
- RAS fixes
- Handle newer IP discovery tables
- SMU 13.0.6 fixes
- SR-IOV fixes
- Display vstartup fixes
- NBIO 7.9 fixes
- Display scaling mode fixes
- Debugfs power reporting fix
- GC 9.4.3 fixes
- Dirty framebuffer fixes for fbcon
- eDP fixes
- DCN 3.1.5 fix
- Display ODM fixes
- GPU core dump fix
- Re-enable zops property now that IGT test is fixed
- Fix possible UAF in CS code
- Cursor degamma fix

amdkfd:
- HMM fixes
- Interrupt masking fix
- GFX11 MQD fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907033049.7811-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-08-31' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Mark requests for GuC virtual engines to avoid use-after-free (Andrzej).

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZPEGEeP2EwCtx9hM@intel.com

Merge tag 'rtc-6.6' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...

Merge tag 'i3c/for-6.6' of git://git./linux/kernel/git/i3c/linux

Pull i3c updates from Alexandre Belloni:
"Core:
   - Fix SETDASA when static and dynamic adress are equal
   - Fix cmd_v1 DAA exit criteria

  Drivers:
   - svc: allow probing without any device"

* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix probe failure when no i3c device exist
  i3c: master: Fix SETDASA process
  dt-bindings: i3c: Fix description for assigned-address
  i3c: master: svc: Describe member 'saved_regs'
  i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
  i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
  i3c: Explicitly include correct DT includes

Merge tag 'regulator-fix-v6.6-merge-window' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, both driver
  specific - one for a bug that came up in testing, one for a bug due
  to a misreading of the datasheet"

* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps6594-regulator: Fix random kernel crash
  regulator: tps6287x: Fix n_voltages

Merge tag 'spi-fix-v6.6-merge-window' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
  single byte width all the time is *hopefully* excessively cautious but
  it's unclear which SoCs are affected so the fix just covers everything
  for safety"

* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
  spi: sun6i: reduce DMA RX transfer width to single byte

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

   - Clean up vCPU targets, always returning generic v8 as the preferred
     target

   - Trap forwarding infrastructure for nested virtualization (used for
     traps that are taken from an L2 guest and are needed by the L1
     hypervisor)

   - FEAT_TLBIRANGE support to only invalidate specific ranges of
     addresses when collapsing a table PTE to a block PTE. This avoids
     that the guest refills the TLBs again for addresses that aren't
     covered by the table PTE.

   - Fix vPMU issues related to handling of PMUver.

   - Don't unnecessary align non-stack allocations in the EL2 VA space

   - Drop HCR_VIRT_EXCP_MASK, which was never used...

   - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
     parameter instead

   - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

   - Remove prototypes without implementations

  RISC-V:

   - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

   - Added ONE_REG interface for SATP mode

   - Added ONE_REG interface to enable/disable multiple ISA extensions

   - Improved error codes returned by ONE_REG interfaces

   - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

   - Added get-reg-list selftest for KVM RISC-V

  s390:

   - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

     Allows a PV guest to use crypto cards. Card access is governed by
     the firmware and once a crypto queue is "bound" to a PV VM every
     other entity (PV or not) looses access until it is not bound
     anymore. Enablement is done via flags when creating the PV VM.

   - Guest debug fixes (Ilya)

  x86:

   - Clean up KVM's handling of Intel architectural events

   - Intel bugfixes

   - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
     debug registers and generate/handle #DBs

   - Clean up LBR virtualization code

   - Fix a bug where KVM fails to set the target pCPU during an IRTE
     update

   - Fix fatal bugs in SEV-ES intrahost migration

   - Fix a bug where the recent (architecturally correct) change to
     reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
     skip it)

   - Retry APIC map recalculation if a vCPU is added/enabled

   - Overhaul emergency reboot code to bring SVM up to par with VMX, tie
     the "emergency disabling" behavior to KVM actually being loaded,
     and move all of the logic within KVM

   - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
     TSC ratio MSR cannot diverge from the default when TSC scaling is
     disabled up related code

   - Add a framework to allow "caching" feature flags so that KVM can
     check if the guest can use a feature without needing to search
     guest CPUID

   - Rip out the ancient MMU_DEBUG crud and replace the useful bits with
     CONFIG_KVM_PROVE_MMU

   - Fix KVM's handling of !visible guest roots to avoid premature
     triple fault injection

   - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
     API surface that is needed by external users (currently only
     KVMGT), and fix a variety of issues in the process

  Generic:

   - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
     events to pass action specific data without needing to constantly
     update the main handlers.

   - Drop unused function declarations

  Selftests:

   - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

   - Add support for printf() in guest code and covert all guest asserts
     to use printf-based reporting

   - Clean up the PMU event filter test and add new testcases

   - Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
  KVM: x86/mmu: Include mmu.h in spte.h
  KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
  KVM: x86/mmu: Disallow guest from using !visible slots for page tables
  KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
  KVM: x86/mmu: Harden new PGD against roots without shadow pages
  KVM: x86/mmu: Add helper to convert root hpa to shadow page
  drm/i915/gvt: Drop final dependencies on KVM internal details
  KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
  KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
  KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
  KVM: x86/mmu: Assert that correct locks are held for page write-tracking
  KVM: x86/mmu: Rename page-track APIs to reflect the new reality
  KVM: x86/mmu: Drop infrastructure for multiple page-track modes
  KVM: x86/mmu: Use page-track notifiers iff there are external users
  KVM: x86/mmu: Move KVM-only page-track declarations to internal header
  KVM: x86: Remove the unused page-track hook track_flush_slot()
  drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
  KVM: x86: Add a new page-track hook to handle memslot deletion
  drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
  KVM: x86: Reject memslot MOVE operations if KVMGT is attached
  ...

Merge tag 'drm-misc-next-fixes-2023-09-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

* ivpu: Replace strncpy
* nouveau: Fix fence state in nouveau_fence_emit()

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901070123.GA6987@linux-uq9g

net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()

enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().

Fixes: f0168042a212 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/582183ef-e03b-402b-8e2d-6d9bb3c83bd9@moroto.mountain/
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230906141609.247579-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "net: team: do not use dynamic lockdep key"

This reverts commit 39285e124edbc752331e98ace37cc141a6a3747a.

Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.

Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e124edb ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 's390-6.6-2' of git://git./linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

- A couple of virtual vs physical address confusion fixes

- Rework locking in dcssblk driver to address a lockdep warning

- Remove support for "noexec" kernel command line option since there is
   no use case where it would make sense

- Simplify kernel mapping setup and get rid of quite a bit of code

- Add architecture specific __set_memory_yy() functions which allow us
   to modify kernel mappings. Unlike the set_memory_xx() variants they
   take void pointer start and end parameters, which allows using them
   without the usual casts, and also to use them on areas larger than
   8TB.

   Note that the set_memory_xx() family comes with an int num_pages
   parameter which overflows with 8TB. This could be addressed by
   changing the num_pages parameter to unsigned long, however requires
   to change all architectures, since the module code expects an int
   parameter (see module_set_memory()).

   This was indeed an issue since for debug_pagealloc() we call
   set_memory_4k() on the whole identity mapping. Therefore address this
   for now with the __set_memory_yy() variant, and address common code
   later

- Use dev_set_name() and also fix memory leak in zcrypt driver error
   handling

- Remove unused lsi_mask from airq_struct

- Add warning for invalid kernel mapping requests

* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vmem: do not silently ignore mapping limit
  s390/zcrypt: utilize dev_set_name() ability to use a formatted string
  s390/zcrypt: don't leak memory if dev_set_name() fails
  s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
  s390/airq: remove lsi_mask from airq_struct
  s390/mm: use __set_memory() variants where useful
  s390/set_memory: add __set_memory() variant
  s390/set_memory: generate all set_memory() functions
  s390/mm: improve description of mapping permissions of prefix pages
  s390/amode31: change type of __samode31, __eamode31, etc
  s390/mm: simplify kernel mapping setup
  s390: remove "noexec" option
  s390/vmem: fix virtual vs physical address confusion
  s390/dcssblk: fix lockdep warning
  s390/monreader: fix virtual vs physical address confusion

Merge tag 'mips_6.6' of git://git./linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"

* tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: TXx9: Do PCI error checks on own line
  arch/mips/configs/*_defconfig cleanup
  MIPS: VDSO: Conditionally export __vdso_gettimeofday()
  Mips: loongson3_defconfig: Enable ast drm driver by default
  mips: remove <asm/export.h>
  mips: replace #include <asm/export.h> with #include <linux/export.h>
  mips: remove unneeded #include <asm/export.h>
  MIPS: Loongson64: Fix more __iomem attributes
  MIPS: loongson32: Remove regs-rtc.h
  MIPS: loongson32: Remove regs-clk.h
  MIPS: More explicit DT include clean-ups
  MIPS: Fixup explicit DT include clean-up
  Revert MIPS: Loongson: Fix build error when make modules_install
  MIPS: Only fiddle with CHECKFLAGS if `need-compiler'
  MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression
  MIPS: Explicitly include correct DT includes

Merge tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa

Pull xtensa updates from Max Filippov:

- enable MTD XIP support

- fix base address of the xtensa perf module in newer hardware

* tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add XIP-aware MTD support
xtensa: PMU: fix base address for the newer hardware

ntfs3: drop inode references in ntfs_put_super()

Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup.  This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb().  But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super().  Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.

Fixes: a4f64a300a29 ("ntfs3: free the sbi in ->kill_sb") # mainline only
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: mostly undo glibc turning 'fstat()' into 'fstatat(AT_EMPTY_PATH)'

Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and
that seems to have been going on for quite a long time due to glibc
having tried to simplify its stat logic into just one point.

This turns out to cause completely unnecessary overhead, where we then
go off and allocate the kernel side pathname, and actually look up the
empty path.  Sure, our path lookup is quite optimized, but it still
causes a fair bit of allocation overhead and a couple of completely
unnecessary rounds of lockref accesses etc.

This is all hopefully getting fixed in user space, and there is a patch
floating around for just having glibc use the native fstat() system
call.  But even with the current situation we can at least improve on
things by catching the situation and short-circuiting it.

Note that this is still measurably slower than just a plain 'fstat()',
since just checking that the filename is actually empty is somewhat
expensive due to inevitable user space access overhead from the kernel
(ie verifying pointers, and SMAP on x86).  But it's still quite a bit
faster than actually looking up the path for real.

To quote numers from Mateusz:
"Sapphire Rapids, will-it-scale, ops/s

  stock fstat 5088199
  patched fstat 7625244 (+49%)
  real fstat 8540383 (+67% / +12%)"

where that 'stock fstat' is the glibc translation of fstat into
fstatat() with an empty path, the 'patched fstat' is with this short
circuiting of the path lookup, and the 'real fstat' is the actual native
fstat() system call with none of this overhead.

Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()"

This reverts commit b484a40dc1f16edb58e5430105a021e1916e6f27.

This commit cancels all requests with io-wq, not just the ones from the
originating task. This breaks use cases that have thread pools, or just
multiple tasks issuing requests on the same ring. The liburing
regression test for this also shows that problem:

$ test/thread-exit.t
cqe->res=-125, Expected 512

where an IO thread gets its request canceled rather than complete
successfully.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix unprotected iopoll overflow

[   71.490669] WARNING: CPU: 3 PID: 17070 at io_uring/io_uring.c:769
io_cqring_event_overflow+0x47b/0x6b0
[   71.498381] Call Trace:
[   71.498590]  <TASK>
[   71.501858]  io_req_cqe_overflow+0x105/0x1e0
[   71.502194]  __io_submit_flush_completions+0x9f9/0x1090
[   71.503537]  io_submit_sqes+0xebd/0x1f00
[   71.503879]  __do_sys_io_uring_enter+0x8c5/0x2380
[   71.507360]  do_syscall_64+0x39/0x80

We decoupled CQ locking from ->task_complete but haven't fixed up places
forcing locking for CQ overflows.

Fixes: ec26c225f06f5 ("io_uring: merge iopoll and normal completion paths")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: break out of iowq iopoll on teardown

io-wq will retry iopoll even when it failed with -EAGAIN. If that
races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers,
such workers might potentially infinitely spin retrying iopoll again and
again and each time failing on some allocation / waiting / etc. Don't
keep spinning if io-wq is dying.

Fixes: 561fb04a6a225 ("io_uring: replace workqueue usage with io-wq")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert "printk: export symbols for debug modules"

This reverts commit 3e00123a13d824d63072b1824c9da59cd78356d9.

No, we never export random symbols for out of tree modules.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230905081902.321778-1-hch@lst.de

Merge tag 'asoc-fix-v6.6-merge-window' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

A bunch of fixes and new IDs that came in since the initial pull request
- all driver specific and nothing too exciting.

There's a trivial conflict in the AMD driver ID table due to the last
v6.5 fixes not having been merged up.

Merge tag 'nf-23-09-06' of https://git./linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
netfilter updates for net

This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:

First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.

2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.

3rd patch adds a missing enum description, from Phil Sutter.

4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress.  Fix from Pablo Neira Ayuso.

Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.

Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.

netfilter pull request 2023-09-06

* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================

Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

arm64: csum: Fix OoB access in IP checksum code for negative lengths

Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:

| BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
|
| CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
| Call trace:
|  dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
|  show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
|  __dump_stack lib/dump_stack.c:88 [inline]
|  dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
|  print_address_description mm/kasan/report.c:351 [inline]
|  print_report+0x174/0x514 mm/kasan/report.c:462
|  kasan_report+0xd4/0x130 mm/kasan/report.c:572
|  kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
|  __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
|  do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
|  csum_partial+0x30/0x58 lib/checksum.c:128
|  gso_make_checksum include/linux/skbuff.h:4928 [inline]
|  __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
|  udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
|  ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
|  skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
|  __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
|  skb_gso_segment include/linux/netdevice.h:4859 [inline]
|  validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
|  validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
|  sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
|  __dev_xmit_skb net/core/dev.c:3805 [inline]
|  __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
|  dev_queue_xmit include/linux/netdevice.h:3085 [inline]
|  packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
|  packet_snd net/packet/af_packet.c:3081 [inline]
|  packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
|  sock_sendmsg_nosec net/socket.c:724 [inline]
|  sock_sendmsg net/socket.c:747 [inline]
|  __sys_sendto+0x3b4/0x538 net/socket.c:2144

Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c

Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 5777eaed566a ("arm64: Implement optimised checksum routine")
Reported-by: syzbot+4a9f9820bd8d302e22f7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000e0e94c0603f8d213@google.com
Signed-off-by: Will Deacon <will@kernel.org>

Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20230906072018.3020671-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: remove GSO partial feature bit

HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix the port information display when sfp is absent

When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.

Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue

We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.

However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.

This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix debugfs concurrency issue between kfree buffer and read

Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.

Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.

Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()

req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.

Convert tcam_data to (__le32 *) first to fix it.

Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: Support query tx timeout threshold by debugfs

support query tx timeout threshold by debugfs

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix tx timeout issue

Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.

Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ALSA: hda/realtek - ALC287 I2S speaker platform support

0x17 was only speaker pin, DAC assigned will be 0x03. Headphone
assigned to 0x02.
Playback via headphone will get EQ filter processing. So,it needs to
swap DAC.

Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4e4cfa1b3b4c46838aecafc6e8b6f876@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

LoongArch: Update Loongson-3 default config file

1, Enable LSX and LASX.
2, Enable KASLR (CONFIG_RANDOMIZE_BASE).
3, Enable jump label (patching mechanism for static key).
4, Enable LoongArch CRC32(c) Acceleration.
5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI.
6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems.
7, Enable WangXun NGBE/TXGBE NIC drivers.
8, Enable some IPVS options.
9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig.
10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig.
11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig.
12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)

The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.

The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.

To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.

Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.

Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/amdgpu: Restrict bootloader wait to SMUv13.0.6

Restrict the wait for boot loader steady state only to SMUv13.0.6. For
older SOCs, ASIC init has a longer wait period and that takes care.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: prevent potential division by zero errors

There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637
Fixes: a463b263032f ("drm/amd/display: Fix frames_to_insert math")
Fixes: ded6119e825a ("drm/amd/display: Reinstate LFC optimization")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma

For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1

Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().

Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Remove v_startup workaround for dcn3+"

This reverts commit 3a31e8b89b7240d9a17ace8a1ed050bdcb560f9e.

We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+
ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-09-06

We've added 9 non-merge commits during the last 6 day(s) which contain
a total of 12 files changed, 189 insertions(+), 44 deletions(-).

The main changes are:

1) Fix bpf_sk_storage to address an invalid wait context lockdep
   report and another one to address missing omem uncharge,
   from Martin KaFai Lau.

2) Two BPF recursion detection related fixes,
   from Sebastian Andrzej Siewior.

3) Fix tailcall limit enforcement in trampolines for s390 JIT,
   from Ilya Leoshkevich.

4) Fix a sockmap refcount race where skbs in sk_psock_backlog can
   be referenced after user space side has already skb_consumed them,
   from John Fastabend.

5) Fix BPF CI flake/race wrt sockmap vsock write test where
   the transport endpoint is not connected, from Xu Kuohai.

6) Follow-up doc fix to address a cross-link warning,
   from Eduard Zingerman.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
  bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
  bpf, sockmap: Fix skb refcnt race after locking changes
  docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst
  selftests/bpf: Fix a CI failure caused by vsock write
====================

Link: https://lore.kernel.org/r/20230906095117.16941-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

powercap: intel_rapl: Fix invalid setting of Power Limit 4

System runs at minimum performance, once powercap RAPL package domain
enabled flag is changed from 1 to 0 to 1.

Setting RAPL package domain enabled flag to 0, results in setting of
power limit 4 (PL4) MSR 0x601 to 0. This implies disabling PL4 limit.
The PL4 limit controls the peak power. So setting 0, results in some
undesirable performance, which depends on hardware implementation.

Even worse, when the enabled flag is set to 1 again. This will set PL4
MSR value to 0x01, which means reduce peak power to 0.125W. This will
force system to run at the lowest possible performance on every PL4
supported system.

Setting enabled flag should only affect the "enable" bit, not other
bits. Here it is changing power limit.

This is caused by a change which assumes that there is an enable bit in
the PL4 MSR like other power limits. Although PL4 enable/disable bit is
present with TPMI RAPL interface, it is not present with the MSR
interface.

There is a rapl_primitive_info defined for non existent PL4 enable bit
and then it is used with the commit 9050a9cd5e4c ("powercap: intel_rapl:
Cleanup Power Limits support") to enable PL4. This is wrong, hence remove
this rapl primitive for PL4. Also in the function
rapl_detect_powerlimit(), PL_ENABLE is used to check for the presence of
power limits. Replace PL_ENABLE with PL_LIMIT, as PL_LIMIT must be
present. Without this change, PL4 controls will not be available in the
sysfs once rapl primitive for PL4 is removed.

Fixes: 9050a9cd5e4c ("powercap: intel_rapl: Cleanup Power Limits support")
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"Mixed with some fixes and cleanups, this brings in reasonably complete
  fscrypt support to CephFS! The list of things which don't work with
  encryption should be fairly short, mostly around the edges: fallocate
  (not supported well in CephFS to begin with), copy_file_range
  (requires re-encryption), non-default striping patterns.

  This was a multi-year effort principally by Jeff Layton with
  assistance from Xiubo Li, Luís Henriques and others, including several
  dependant changes in the MDS, netfs helper library and fscrypt
  framework itself"

* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
  ceph: make num_fwd and num_retry to __u32
  ceph: make members in struct ceph_mds_request_args_ext a union
  rbd: use list_for_each_entry() helper
  libceph: do not include crypto/algapi.h
  ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
  ceph: fix updating i_truncate_pagecache_size for fscrypt
  ceph: wait for OSD requests' callbacks to finish when unmounting
  ceph: drop messages from MDS when unmounting
  ceph: update documentation regarding snapshot naming limitations
  ceph: prevent snapshot creation in encrypted locked directories
  ceph: add support for encrypted snapshot names
  ceph: invalidate pages when doing direct/sync writes
  ceph: plumb in decryption during reads
  ceph: add encryption support to writepage and writepages
  ceph: add read/modify/write to ceph_sync_write
  ceph: align data in pages in ceph_sync_write
  ceph: don't use special DIO path for encrypted inodes
  ceph: add truncate size handling support for fscrypt
  ceph: add object version support for sync read
  libceph: allow ceph_osdc_new_request to accept a multi-op read
  ...

ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL

Lenovo 82TL has DMIC connected like 82V2 does. Also match
82TL.

Reported-by: wildjim@kiwinet.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217063
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230906182257.45736-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64/sysreg: Fix broken strncpy() -> strscpy() conversion

Mostafa reports that commit d232606773a0 ("arm64/sysreg: refactor
deprecated strncpy") breaks our early command-line parsing because the
original code is working on space-delimited substrings rather than
NUL-terminated strings.

Rather than simply reverting the broken conversion patch, replace the
strscpy() with a simple memcpy() with an explicit NUL-termination of the
result.

Reported-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Fixes: d232606773a0 ("arm64/sysreg: refactor deprecated strncpy")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230905-strncpy-arch-arm64-v4-1-bc4b14ddfaef@google.com
Link: https://lore.kernel.org/r/20230831162227.2307863-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>

PCI: Free released resource after coalescing

release_resource() doesn't actually free the resource or resource list
entry so free the resource list entry to avoid a leak.

Closes: https://lore.kernel.org/r/878r9sga1t.fsf@kernel.org/
Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing")
Link: https://lore.kernel.org/r/20230906110846.225369-1-ross.lagerwall@citrix.com
Reported-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+

Merge tag 'input-for-v6.6-rc0' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Azoteq IQS7210A/7211A/E touch controllers

- support for Azoteq IQS7222D variant added to iqs7222 driver

- support for touch keys functionality added to Melfas MMS114 driver

- new hardware IDs added to exc3000 and Goodix drivers

- xpad driver gained support for GameSir T4 Kaleid Controller

- a fix for xpad driver to properly support some third-party
   controllers that need a magic packet to start properly

- a fix for psmouse driver to more reliably switch to RMI4 mode on
   devices that use native RMI4/SMbus protocol

- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops

- multiple drivers have been updated to make use of devm and other
   newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
   others.

* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
  Input: goodix - add support for ACPI ID GDX9110
  Input: rpckbd - fix the return value handle for platform_get_irq()
  Input: tca6416-keypad - switch to using input core's polling features
  Input: tca6416-keypad - convert to use devm_* api
  Input: tca6416-keypad - fix interrupt enable disbalance
  Input: tca6416-keypad - rely on I2C core to set up suspend/resume
  Input: tca6416-keypad - always expect proper IRQ number in i2c client
  Input: lm8323 - convert to use devm_* api
  Input: lm8323 - rely on device core to create kp_disable attribute
  Input: qt2160 - convert to use devm_* api
  Input: qt2160 - do not hard code interrupt trigger
  Input: qt2160 - switch to using threaded interrupt handler
  Input: qt2160 - tweak check for i2c adapter functionality
  Input: psmouse - add delay when deactivating for SMBus mode
  Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
  Input: qt1070 - convert to use devm_* api
  Input: mcs-touchkey - convert to use devm_* api
  Input: amikbd - convert to use devm_* api
  Input: lm8333 - convert to use devm_* api
  Input: mms114 - add support for touch keys
  ...

Merge tag 'linux-watchdog-6.6-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- add marvell GTI watchdog driver

- add support for Amlogic-T7 SoCs

- document the IPQ5018 watchdog compatible

- enable COMPILE_TEST for more watchdog device drivers

- core: stop watchdog when executing poweroff command

- other small improvements and fixes

* tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: (21 commits)
  watchdog: Add support for Amlogic-T7 SoCs
  watchdog: Add a new struct for Amlogic-GXBB driver
  dt-bindings: watchdog: Add support for Amlogic-T7 SoCs
  dt-bindings: watchdog: qcom-wdt: document IPQ5018
  watchdog: imx2_wdt: Improve dev_crit() message
  watchdog: stm32: Drop unnecessary of_match_ptr()
  watchdog: sama5d4: readout initial state
  watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
  watchdog: core: stop watchdog when executing poweroff command
  watchdog: pm8916_wdt: Remove redundant of_match_ptr()
  watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()
  watchdog: starfive: Remove #ifdef guards for PM related functions
  watchdog: s3c2410: Fix potential deadlock on &wdt->lock
  watchdog:rit_wdt: Add support for WDIOF_CARDRESET
  dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET
  watchdog: Enable COMPILE_TEST for more drivers
  watchdog: advantech_ec_wdt: fix Kconfig dependencies
  watchdog: Explicitly include correct DT includes
  Watchdog: Add marvell GTI watchdog driver
  dt-bindings: watchdog: marvell GTI system watchdog driver
  ...

netfilter: nf_tables: Unbreak audit log reset

Deliver audit log from __nf_tables_dump_rules(), table dereference at
the end of the table list loop might point to the list head, leading to
this crash.

[ 4137.407349] BUG: unable to handle page fault for address: 00000000001f3c50
[ 4137.407357] #PF: supervisor read access in kernel mode
[ 4137.407359] #PF: error_code(0x0000) - not-present page
[ 4137.407360] PGD 0 P4D 0
[ 4137.407363] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4137.407365] CPU: 4 PID: 500177 Comm: nft Not tainted 6.5.0+ #277
[ 4137.407369] RIP: 0010:string+0x49/0xd0
[ 4137.407374] Code: ff 77 36 45 89 d1 31 f6 49 01 f9 66 45 85 d2 75 19 eb 1e 49 39 f8 76 02 88 07 48 83 c7 01 83 c6 01 48 83 c2 01 4c 39 cf 74 07 <0f> b6 02 84 c0 75 e2 4c 89 c2 e9 58 e5 ff ff 48 c7 c0 0e b2 ff 81
[ 4137.407377] RSP: 0018:ffff8881179737f0 EFLAGS: 00010286
[ 4137.407379] RAX: 00000000001f2c50 RBX: ffff888117973848 RCX: ffff0a00ffffff04
[ 4137.407380] RDX: 00000000001f3c50 RSI: 0000000000000000 RDI: 0000000000000000
[ 4137.407381] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffffffff
[ 4137.407383] R10: ffffffffffffffff R11: ffff88813584d200 R12: 0000000000000000
[ 4137.407384] R13: ffffffffa15cf709 R14: 0000000000000000 R15: ffffffffa15cf709
[ 4137.407385] FS:  00007fcfc18bb580(0000) GS:ffff88840e700000(0000) knlGS:0000000000000000
[ 4137.407387] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4137.407388] CR2: 00000000001f3c50 CR3: 00000001055b2001 CR4: 00000000001706e0
[ 4137.407390] Call Trace:
[ 4137.407392]  <TASK>
[ 4137.407393]  ? __die+0x1b/0x60
[ 4137.407397]  ? page_fault_oops+0x6b/0xa0
[ 4137.407399]  ? exc_page_fault+0x60/0x120
[ 4137.407403]  ? asm_exc_page_fault+0x22/0x30
[ 4137.407408]  ? string+0x49/0xd0
[ 4137.407410]  vsnprintf+0x257/0x4f0
[ 4137.407414]  kvasprintf+0x3e/0xb0
[ 4137.407417]  kasprintf+0x3e/0x50
[ 4137.407419]  nf_tables_dump_rules+0x1c0/0x360 [nf_tables]
[ 4137.407439]  ? __alloc_skb+0xc3/0x170
[ 4137.407442]  netlink_dump+0x170/0x330
[ 4137.407447]  __netlink_dump_start+0x227/0x300
[ 4137.407449]  nf_tables_getrule+0x205/0x390 [nf_tables]

Deliver audit log only once at the end of the rule dump+reset for
consistency with the set dump+reset.

Ensure audit reset access to table under rcu read side lock. The table
list iteration holds rcu read lock side, but recent audit code
dereferences table object out of the rcu read lock side.

Fixes: ea078ae9108e ("netfilter: nf_tables: Audit log rule reset")
Fixes: 7e9be1124dbe ("netfilter: nf_tables: Audit log setelem reset")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c

The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction

New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element.

Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID

Add a brief description to the enum's comment.

Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nfnetlink_osf: avoid OOB read

The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.

BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431

CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
expr_call_ops_eval net/netfilter/nf_tables_core.c:214
nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
[..]

Also add validation to genre, subtype and version fields.

Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nftables: exthdr: fix 4-byte stack OOB write

If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.

This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.

The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.

Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Fixes: 935b7f643018 ("netfilter: nft_exthdr: add TCP option matching")
Fixes: 133dc203d77d ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Florian Westphal <fw@strlen.de>

Merge tag 'backlight-next-6.6' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
"New Functionality:

   - Ensure correct includes are present and remove some that are not
     required

   - Drop redundant of_match_ptr() call to cast pointer to NULL

  Bug Fixes:

   - Revert to old (expected) behaviour of initialising PWM state on
     first brightness change

   - Correctly handle / propagate errors

   - Fix 'sometimes-uninitialised' issues"

* tag 'backlight-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: led_bl: Remove redundant of_match_ptr()
  backlight: lp855x: Drop ret variable in brightness change function
  backlight: gpio_backlight: Drop output GPIO direction check for initial power state
  backlight: lp855x: Catch errors when changing brightness
  backlight: lp855x: Initialize PWM state on first brightness change
  backlight: qcom-wled: Explicitly include correct DT includes

gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks

Commit f56914393537 ("gpio: zynq: fix zynqmp_gpio not an immutable chip
warning") ditched the open-coded resource allocation handlers in favor
of the generic ones. These generic handlers don't maintain the PM
runtime anymore, which causes a regression in that level IRQs are no
longer reported.

Restore the original handlers to fix this.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Fixes: f56914393537 ("gpio: zynq: fix zynqmp_gpio not an immutable chip warning")
Cc: stable@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

LoongArch: Add KASAN (Kernel Address Sanitizer) support

1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
space (256T available) is insufficient to map all these segments to kasan
shadow memory with the common formula provided by kasan core, saying
(addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET

So LoongArch has a arch-specific mapping formula, different segments are
mapped individually, and only limited space lengths of these specific
segments are mapped to shadow.

At early boot stage the whole shadow region populated with just one
physical page (kasan_early_shadow_page). Later, this page is reused as
readonly zero shadow for some memory that kasan currently don't track.
After mapping the physical memory, pages for shadow memory are allocated
and mapped.

Functions like memset()/memcpy()/memmove() do a lot of memory accesses.
If bad pointer passed to one of these function it is important to be
caught. Compiler's instrumentation cannot do this since these functions
are written in assembly.

KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in
mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in names, so we could call non-instrumented variant
if needed.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Simplify the processing of jumping new kernel for KASLR

Modified relocate_kernel() doesn't return new kernel's entry point but
the random_offset. In this way we share the start_kernel() processing
with the normal kernel, which avoids calling 'jr a0' directly and allows
some other operations (e.g, kasan_early_init) before start_kernel() when
KASLR (CONFIG_RANDOMIZE_BASE) is turned on.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process

LoongArch populates pmd/pud with invalid_pmd_table/invalid_pud_table in
pagetable_init, So pmd_init/pud_init(p) is required, define them as __weak
in mm/kasan/init.c, like mm/sparse-vmemmap.c.

Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping

MIPS, LoongArch and some other architectures have many holes between
different segments and the valid address space (256T available) is
insufficient to map all these segments to kasan shadow memory with the
common formula provided by kasan core. So we need architecture specific
mapping formulas to ensure different segments are mapped individually,
and only limited space lengths of those specific segments are mapped to
shadow.

Therefore, when the incoming address is converted to a shadow, we need
to add a condition to determine whether it is valid.

Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add KFENCE (Kernel Electric-Fence) support

The LoongArch architecture is quite different from other architectures.
When the allocating of KFENCE itself is done, it is mapped to the direct
mapping configuration window [1] by default on LoongArch. It means that
it is not possible to use the page table mapped mode which required by
the KFENCE system and therefore it should be remapped to the appropriate
region.

This patch adds architecture specific implementation details for KFENCE.
In particular, this implements the required interface in <asm/kfence.h>.

Tested this patch by running the testcases and all passed.

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#virtual-address-space-and-address-translation-mode

Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Get partial stack information when providing regs parameter

Currently, arch_stack_walk() can only get the full stack information
including NMI.  This is because the implementation of arch_stack_walk()
is forced to ignore the information passed by the regs parameter and use
the current stack information instead.

For some detection systems like KFENCE, only partial stack information
is needed.  In particular, the stack frame where the interrupt occurred.

To support KFENCE, this patch modifies the implementation of the
arch_stack_walk() function so that if this function is called with the
regs argument passed, it retains all the stack information in regs and
uses it to provide accurate information.

Before this patch:
[    1.531195 ] ==================================================================
[    1.531442 ] BUG: KFENCE: out-of-bounds read in stack_trace_save_regs+0x48/0x6c
[    1.531442 ]
[    1.531900 ] Out-of-bounds read at 0xffff800012267fff (1B left of kfence-#12):
[    1.532046 ]  stack_trace_save_regs+0x48/0x6c
[    1.532169 ]  kfence_report_error+0xa4/0x528
[    1.532276 ]  kfence_handle_page_fault+0x124/0x270
[    1.532388 ]  no_context+0x50/0x94
[    1.532453 ]  do_page_fault+0x1a8/0x36c
[    1.532524 ]  tlb_do_page_fault_0+0x118/0x1b4
[    1.532623 ]  test_out_of_bounds_read+0xa0/0x1d8
[    1.532745 ]  kunit_generic_run_threadfn_adapter+0x1c/0x28
[    1.532854 ]  kthread+0x124/0x130
[    1.532922 ]  ret_from_kernel_thread+0xc/0xa4
<snip>

After this patch:
[    1.320220 ] ==================================================================
[    1.320401 ] BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa8/0x1d8
[    1.320401 ]
[    1.320898 ] Out-of-bounds read at 0xffff800012257fff (1B left of kfence-#10):
[    1.321134 ]  test_out_of_bounds_read+0xa8/0x1d8
[    1.321264 ]  kunit_generic_run_threadfn_adapter+0x1c/0x28
[    1.321392 ]  kthread+0x124/0x130
[    1.321459 ]  ret_from_kernel_thread+0xc/0xa4
<snip>

Suggested-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: mm: Add page table mapped mode support for virt_to_page()

According to LoongArch documentations, there are two types of address
translation modes: direct mapped address translation mode (DMW mode) and
page table mapped address translation mode (TLB mode).

Currently, virt_to_page() only supports direct mapped mode. This patch
determines which mode is used, and adds corresponding handling functions
for both modes.

For more details on the two modes, see [1].

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#virtual-address-space-and-address-translation-mode

Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

kfence: Defer the assignment of the local variable addr

The LoongArch architecture is different from other architectures. It
needs to update __kfence_pool during arch_kfence_init_pool().

This patch modifies the assignment location of the local variable addr
in the kfence_init_pool() function to support the case of updating
__kfence_pool in arch_kfence_init_pool().

Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Allow building with kcov coverage

Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the LoongArch Kconfig. And
also disable instrumentation of vdso.

Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Provide kaslr_offset() to get kernel offset

Provide kaslr_offset() to get the kernel offset when KASLR is enabled.

Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add basic KGDB & KDB support

KGDB is intended to be used as a source level debugger for the Linux
kernel. It is used along with gdb to debug a Linux kernel. GDB can be
used to "break in" to the kernel to inspect memory, variables and regs
similar to the way an application developer would use GDB to debug an
application. KDB is a frontend of KGDB which is similar to GDB.

By now, in addition to the generic KGDB features, the LoongArch KGDB
implements the following features:
- Hardware breakpoints/watchpoints;
- Software single-step support for KDB.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn> # Framework & CoreFeature
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> # BreakPoint & SingleStep
Signed-off-by: Hui Li <lihui@loongson.cn> # Some Minor Improvements
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> # Some Build Error Fixes
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>