Heinrich Schuchardt [Sun, 29 Jul 2018 09:08:14 +0000 (11:08 +0200)]
README: U_BOOT_ENV_CALLBACK functions
Describe the interface of environment variable callback functions.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 29 Jul 2018 08:41:02 +0000 (10:41 +0200)]
drivers: serial: document on_baudrate()
Add parameter description.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Adam Ford [Sat, 28 Jul 2018 19:03:21 +0000 (14:03 -0500)]
omap3_logic: Fix CONS_INDEX
The console index for SPL should be 1 not 3 in order to see text during
SPL.
Fixes:
6f6b7cfa89e5 ("Convert all of CONFIG_CONS_INDEX to Kconfig")
Signed-off-by: Adam Ford <aford173@gmail.com>
Troy Kisky [Fri, 27 Jul 2018 23:45:26 +0000 (16:45 -0700)]
sata: fix sata_Probe return value check
sata_probe returns 1 for failure, so don't checkout for < 0
fixes:
f19f1ecb6025 dm: sata: Support driver model with the 'sata' command
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Fri, 27 Jul 2018 14:37:09 +0000 (16:37 +0200)]
sandbox: led: use new function to configure default state
Initialize the led with the default state defined in device tree
in board_init and solve issue with test for led default state.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Fri, 27 Jul 2018 14:37:08 +0000 (16:37 +0200)]
stm32mp1: use new function led default state
Initialize the led with the default state defined in device tree.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Fri, 27 Jul 2018 14:37:07 +0000 (16:37 +0200)]
dm: led: move default state support in led uclass
This patch save common LED property "default-state" value
in post bind of LED uclass.
The configuration for this default state is only performed when
led_default_state() is called;
It can be called in your board_init()
or it could added in init_sequence_r[] in future.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Fri, 27 Jul 2018 14:37:06 +0000 (16:37 +0200)]
Revert "dm: led: auto probe() LEDs with "default-state""
This reverts commit
bc882f5d5c7b4d6ed5e927bf838863af43c786e7.
because this patch adds the probe of LED driver during the
binding phasis. It is not allowed in driver model because
the drivers (clock, pincontrol) needed by the LED driver can
be also probed before the binding of all the device and
it is a source of problems.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Fri, 27 Jul 2018 14:37:05 +0000 (16:37 +0200)]
stm32mp1: add gpio led support
This patch add the 4 LED available on the ED1 board and activated
gpio led driver.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tom Rini [Fri, 10 Aug 2018 11:21:02 +0000 (07:21 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Thu, 9 Aug 2018 15:48:13 +0000 (11:48 -0400)]
bcm968380gerg: Add MAINTAINERS file
Add an initial MAINTAINERS file based on author of the code.
Cc: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 9 Aug 2018 15:10:41 +0000 (11:10 -0400)]
Merge git://git.denx.de/u-boot-dm
Tom Rini [Thu, 9 Aug 2018 00:02:39 +0000 (20:02 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mips
Sam Protsenko [Fri, 13 Jul 2018 13:35:47 +0000 (16:35 +0300)]
dfu: Provide more verbose error message
It might be useful for user to see some human-readable root cause
message in addition to "configuration failed" message, so that the issue
can be fixed quickly.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Sam Protsenko [Fri, 13 Jul 2018 13:35:46 +0000 (16:35 +0300)]
dfu: Fix memory leak in dfu_init_env_entities()
In case of error in dfu_init_env_entities(), env_bkp will leak. Fix it
by providing single return path.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Sam Protsenko [Fri, 13 Jul 2018 13:35:45 +0000 (16:35 +0300)]
dfu: Fix data abort in dfu_free_entities()
Commit
5d8fae79163e ("dfu: avoid memory leak") brings a regression which
described below. This patch is effectively reverting that commit, adding
corresponding comment to avoid such regressions in future.
In case of error in dfu_config_entities(), it frees "dfu" array, which
leads to "data abort" in dfu_free_entities(), which tries to free the
same array (and even tries to access it from linked list first). The
issue occurs e.g. when partition table on device does not match
$dfu_alt_info layout:
=> dfu 0 mmc 1
Couldn't find part #2 on mmc device #1
DFU entities configuration failed!
data abort
To fix this issue, do not free "dfu" array in dfu_config_entities(). It
will be freed later in dfu_free_entities().
Tested on BeagleBone Black (where this regression was originally found).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:49 +0000 (13:05 +0200)]
usb: rockchip: on K_FW_LBA_WRITE_10 remove magic block size of 512 bytes
As well as in K_FW_LBA_READ_10 and K_FW_LBA_ERASE_10 take device's
block size from f_rkusb->desc->blksz instead of the fixed 512 bytes.
Keep original behaviour of retry probing assigned block device on
every host request to manage late SDCard plugs.
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:48 +0000 (13:05 +0200)]
usb: rockchip: fix printing csw debug info
Workstation tool was happy while console on device were printing
random numbers..
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:46 +0000 (13:05 +0200)]
usb: rockchip: be quiet on serial port while transferring data
While downloading or uploading megabytes of data we had thousands of
printf in console like:
transfer 0x10000 bytes done
OR
Uploading 0x1000 bytes
This because transfers are chunked and there is no way on target
side to know the overall transfer size (to print one string per
overall transfer).
All these prints on serial console do slow down significantly the
transfer and does not offer a significant information to the
developer: rkdeveloptool and Rockchip original tool do use small
chunks read/writes on big transfers. This allows on workstation
to print percentage of transfer complete and as well offers to
developer the information about: transfer is running OK.
On error, either the percentage will stop or an error will be shown
on workstation console.
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:45 +0000 (13:05 +0200)]
usb: rockchip: implement K_FW_LBA_ERASE_10 command
This command is part of the write partition sequence performed by
rkdeveloptool: one partition is first completely erased and
than wrote.
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:44 +0000 (13:05 +0200)]
usb: rockchip: implement K_FW_LBA_READ_10 command
This patch implement reading blocks form selected device with
LBA addressing.
Corresponding command on workstation is:
rkdeveloptool rl <start_blk> <blk_cnt> <file>
While we support reading more than one blocks per K_FW_LBA_READ_10
request, rkdeveloptool and original rockchip tool do perform
chunk reads limiting the maximum size per chunk far lower
than max int values.
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:42 +0000 (13:05 +0200)]
usb: rockchip: implement skeleton for K_FW_GET_CHIP_VER command
Chip Version is a string saved in BOOTROM address space Little Endian.
Ex for rk3288: 0x33323041 0x32303134 0x30383133 0x56323030
which brings: 320A20140813V200
Note that memory version do invert MSB/LSB so printing the char
buffer would show: A02341023180002V
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Alberto Panizzo [Thu, 12 Jul 2018 11:05:41 +0000 (13:05 +0200)]
usb: rockchip: fix command failed on host side due to missing data
Two consecutive rockusb_tx_write without waiting for request complete
do results in transfer reset of first request and thus no or incomplete
data transfer. This because rockusb_tx_write do use just one USB request
to keep serialization.
So calls like:
rockusb_tx_write_str(emmc_id);
rockusb_tx_write_csw(cbw->tag, cbw->data_transfer_length, CSW_GOOD);
was succeeding only when DEBUG was defined because the time spent
printing debug info was enough for transfer to complete.
This patch fixes the issue adding a simple request complete handler
called rockusb_tx_write_csw to be set as complete handler of in_req
when sending back simple payload + CSW replies to commands.
This new handler will always send CSW_GOOD replies because in case
of error the command callback itself must send back an error CSW as
unique reply to command.
This patch fixes execution of:
$ rkdeveloptool rfi
when DEBUG is not defined.
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Seung-Woo Kim [Mon, 4 Jun 2018 06:53:39 +0000 (15:53 +0900)]
gadget: f_thor: fix hang-up with ctrl-c
After the commit
6aae84769a0b ("gadget: f_thor: Fix memory leaks of
usb request and its buffer"), there is hang-up with ctrl-c in some
udc. It is because req of out_ep is freed before out_ep is disabled.
Fix hang-up with ctrl-c by disabling ep before free req of the ep.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Simon Glass [Thu, 26 Jul 2018 20:28:16 +0000 (14:28 -0600)]
patman: Correct unit test failure
A recent rename of the function did not rename the test file. Fix this.
Fixes:
12308b128fa (lib: fdtdec: Rename routine fdtdec_setup_memory_size())
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 26 Jul 2018 20:02:13 +0000 (14:02 -0600)]
libfdt: Update to latest pylibfdt implementation
The enhanced pylibfdt support in U-Boot needed for binman was a
placeholder while upstreaming of this work continued. This is now
complete, so bring in the changes and update the tools as needed.
There are quite a few changes since we decided to split the
implementation into three fdt classes instead of two.
The Fdt.del_node() method was unfortunately missed in this process and
will be dealt with later. It exists in U-Boot but not upstream.
Further syncing of libfdt probably needs to wait until we assess the
code-size impact of all the new checking code on SPL and possibly provide
a way to disable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:53 +0000 (01:14 -0700)]
test: dm: pci: Add cases for finding PCI capability APIs
Add several PCI capability and extended capability ID registers
in the swap_case driver, so that we can add test case for
dm_pci_find_capability() and dm_pci_find_ext_capability().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:52 +0000 (01:14 -0700)]
dm: pci: Add APIs to find capability and extended capability
This introduces two new APIs dm_pci_find_capability() and
dm_pci_find_ext_capability() to get PCI capability address and
PCI express extended capability address for a given PCI device.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:51 +0000 (01:14 -0700)]
pci: Add all known capability and extended capability ids
Currently we don't have a complete list of capability and extended
capability ids. This adds them.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:50 +0000 (01:14 -0700)]
test: dm: pci: Add tests for mixed static and dynamic devices on the same bus
In the Sandbox test configuration, PCI bus#0 only has static devices
while bus#1 only has dynamic devices. Create a bus#2 that has both
types of devices and test such.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:49 +0000 (01:14 -0700)]
pci: sandbox: emul: Rename priv structure
We have "struct sandbox_pci_priv" in pci_sandbox driver. To avoid
confusion, rename the emul's priv to "struct sandbox_pci_emul_priv".
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:48 +0000 (01:14 -0700)]
test: dm: pci: Test driver binding with driver data provided
With struct pci_device_id, it's possible to pass a driver data for
bound driver to use. This adds a test case for this functionality.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:47 +0000 (01:14 -0700)]
sandbox: Update test.dts for dynamic PCI device driver matching
At present we have two PCI buses in the test configuration. Both
buses have static device-tree config devices. Now we switch the
2nd bus to use dynamic PCI devices for testing.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:46 +0000 (01:14 -0700)]
pci: sandbox: swap_case: Declare dynamic driver matching
This adds a U_BOOT_PCI_DEVICE() declaration to the swap_case driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:45 +0000 (01:14 -0700)]
pci: sandbox: Support dynamically binding device driver
At present all emulated sandbox pci devices must be present in the
device tree in order to be used. The real world pci uclass driver
supports pci device driver matching, and we should add such support
on sandbox too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:44 +0000 (01:14 -0700)]
dm: pci: Assign correct driver data when binding a driver
The correct driver data comes from the matching 'id' instead of
'find_id' in pci_find_and_bind_driver().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:43 +0000 (01:14 -0700)]
pci: sandbox: emul: Fix the call to pci_bus_find_devfn()
With the newly added test cases for PCI configuration access, we get:
=> ut dm pci_busdev
Test: dm_test_pci_busdev: pci.c
test/dm/pci.c:49, dm_test_pci_busdev(): SANDBOX_PCI_VENDOR_ID == vendor:
Expected 4660, got 65535
Test: dm_test_pci_busdev: pci.c (flat tree)
test/dm/pci.c:49, dm_test_pci_busdev(): SANDBOX_PCI_VENDOR_ID == vendor:
Expected 4660, got 65535
Failures: 2
The bug only shows up when bus number is not equal to zero. This is
caused by the plain find_devfn parameter is passed to function call
pci_bus_find_devfn(), inside which find_devfn is compared to devfn
in the device's pplat structure. However pplat->devfn does not carry
the bus number. Fix this by passing find_devfn with bus number masked.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:42 +0000 (01:14 -0700)]
test: dm: pci: Add tests for configuration space access
So far we missed the testing for PCI configuration space access.
This adds tests for it, as well as removing some redundant asserts.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:41 +0000 (01:14 -0700)]
test: dm: pci: Test more than one PCI host controller
So far there is only one PCI host controller in the sandbox test
configuration. This is normally the case for x86, but it can be
common on other architectures like ARM/PPC to have more than one
PCI host controller in the system.
This updates the case to cover such scenario.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:40 +0000 (01:14 -0700)]
pci: sandbox: swap_case: Preserve space indicator bit in BAR registers
With the newly added testing of more than one device, we get:
=> ut dm pci_swapcase
Test: dm_test_pci_swapcase: pci.c
test/dm/pci.c:88, dm_test_pci_swapcase(): "tHIS IS A tESt" = ptr:
Expected "tHIS IS A tESt", got "this is a test"
Test: dm_test_pci_swapcase: pci.c (flat tree)
test/dm/pci.c:88, dm_test_pci_swapcase(): "tHIS IS A tESt" = ptr:
Expected "tHIS IS A tESt", got "this is a test"
Failures: 2
The failure only happens on the 2nd swap_case device on the PCI bus.
The case passes on the 1st device.
It turns out the swap_case driver does not emulate bit#0 in BAR
registers as a read-only bit. This corrects the implementation.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:39 +0000 (01:14 -0700)]
test: dm: pci: Test more than one device on the same bus
It's quite common to have more than one device on the same PCI bus.
This updates the test case to test such scenario.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:38 +0000 (01:14 -0700)]
test: dm: pci: Remove unnecessary steps in dm_test_pci_swapcase()
The check on uclass_get_device() and device_active() is unnecessary
as the follow-up test operations will implicitly probe the driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:37 +0000 (01:14 -0700)]
dm: pci: Fix scanning multi-function device
The flag to control whether to scan multi-function device during
enumeration should be cleared at the beginning of each iteration
if the device's function number equals to zero.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:36 +0000 (01:14 -0700)]
dm: pci: Extract vendor/device id in child_post_bind()
Currently only devfn is extracted in child_post_bind(). Now that
we have the live-tree version API to look up PCI vendor and device
id from the compatible string, let's extract and save them too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:35 +0000 (01:14 -0700)]
dm: core: Add ofnode function to read PCI vendor and device id
We don't have the live-tree version of fdtdec_get_pci_vendev().
This adds the API.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:34 +0000 (01:14 -0700)]
dm: Correct typos in uclass_first/next_device_check()
Correct typos in the comment block of uclass_first/next_device_check().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Fri, 3 Aug 2018 08:14:33 +0000 (01:14 -0700)]
pci: Remove 440ep-specific macros
These macros should not be put in the generic pci.h header file.
Since they are not referenced anywhere, remove them completely.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Philippe Reynes [Mon, 16 Jul 2018 17:06:15 +0000 (19:06 +0200)]
bcm968380gerg: add initial support
This add the initial support of the broadcom reference
board bcm968380gerg with a bcm68380 SoC.
This board has 512 MB of RAM, 128 MB of flash (nand),
2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi).
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Philippe Reynes [Mon, 16 Jul 2018 17:06:14 +0000 (19:06 +0200)]
bcm6838: add initial support
This adds the initial support of the Broadcom BCM6838 SoC familly,
only cpu, dram, uart and leds are supported.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Philippe Reynes [Mon, 16 Jul 2018 17:06:13 +0000 (19:06 +0200)]
bmips: ram: add an option to force the size of the ram
This adds an option to force the size of the ram, and
avoid the detection of ram size.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tom Rini [Wed, 11 Jul 2018 13:05:25 +0000 (09:05 -0400)]
mips: au1x00: Remove support for these SoCs
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform. As pb1x00 had no listed
maintainer I am assuming that it is also orphaned. Remove this platform
and then remove the unused SoC support.
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tom Rini [Mon, 9 Jul 2018 19:09:55 +0000 (15:09 -0400)]
mips: dbau1x00: Remove this board
This platform has been marked as orphan since June of 2016 and should
have been removed some time ago. Do so now.
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tom Rini [Wed, 8 Aug 2018 01:40:14 +0000 (21:40 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 8 Aug 2018 01:36:20 +0000 (21:36 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-samsung
Tom Rini [Tue, 7 Aug 2018 15:36:39 +0000 (11:36 -0400)]
zynqmp: Add avnet_ultra96_rev1_defconfig to the lits of boards
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 7 Aug 2018 15:32:50 +0000 (11:32 -0400)]
Merge tag 'xilinx-for-v2018.09-rc2' of git://git.denx.de/u-boot-microblaze
Xilinx fixes for v2018.09-rc2
xilinx:
- Add support for zybo z7 and ultra96
- Tune zynq and zynqmp mini configurations
- Move SYS_MALLOC_LEN to Kconfig
fdt
- make static funcs
gpio:
- Fix soft gpio driver
- Fix Zynq gpio driver by using platdata
microblaze:
- Fix Kconfig entry
spi
- Move ISSI to Kconfig
Tom Rini [Tue, 7 Aug 2018 15:32:34 +0000 (11:32 -0400)]
Merge git://git.denx.de/u-boot-marvell
Tom Rini [Tue, 7 Aug 2018 11:15:20 +0000 (07:15 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-video
Tom Rini [Tue, 7 Aug 2018 11:15:11 +0000 (07:15 -0400)]
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
Luis Araneda [Fri, 27 Jul 2018 08:43:42 +0000 (04:43 -0400)]
arm: zynq: dts: add spi flash node to zedboard
Add a flash node to fix the detection of the memory IC.
With the changes introduced with commit
8fee8845e754
("enf_sf: reuse setup_flash_device instead of open coding it")
the SPI speed is now read from device-tree or a default value
is applied. This replaced the old behavior of setting the
SPI speed to CONFIG_ENV_SPI_MAX_HZ.
As this board didn't have a flash node, the default value
was applied to the SPI speed, producing an error when probing
the flash memory (speed too slow).
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 2 Aug 2018 10:58:54 +0000 (12:58 +0200)]
gpio: xilinx: Add support for using label property
Add support for reading label property from DT and set up bank name
based on that. If label property is not present full device node name is
used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 6 Aug 2018 05:42:40 +0000 (07:42 +0200)]
gpio: xilinx: Return 0 from xilinx_gpio_set_value
.set_value functions have no specified return value and gpio_uclass is
not working with it too. But this patch is returning 0 to be in sync
with others DM gpio drivers.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 23 Jul 2018 10:40:36 +0000 (12:40 +0200)]
gpio: xilinx: Not read output values via regs
Reading registers for finding out output value is not working because
input value is read instead in case of tristate.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Tue, 31 Jul 2018 12:31:04 +0000 (14:31 +0200)]
common: fdt: Make fdt_del_subnodes/fdt_del_partition static
These functions are only called in this file that's why make them static
to keep static analysers happy.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Mon, 30 Jul 2018 12:29:27 +0000 (14:29 +0200)]
gpio: xilinx: Simplify logic in xilinx_gpio_set_value
There is no reason to do read/write for if/else separately.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 30 Jul 2018 08:02:53 +0000 (10:02 +0200)]
gpio: xilinx: Set value before changing direction
Set a value before changing gpio direction. This will ensure that the
old value is not propagated when direction has changed but new value is
not written yet.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Michal Simek [Mon, 23 Jul 2018 11:40:01 +0000 (13:40 +0200)]
gpio: xilinx: Remove !DM driver
There is no user for !DM driver that's why remove it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 23 Jul 2018 10:08:49 +0000 (12:08 +0200)]
gpio: xilinx: Find out bank before use in xilinx_gpio_get_function()
Call xilinx_gpio_get_bank_pin() before use.
Reported-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Vladimir Vid [Fri, 13 Jul 2018 09:56:00 +0000 (11:56 +0200)]
arm64: a37xx: add CONFIG_MTD_DEVICE and CONFIG_MTD_PARTITIONS
CONFIG_MTD_DEVICE is required for the mtdparts command and but it is missing from the mvebu_armada-37xx.h
CONFIG_MTD_PARTITIONS is needed for the ubi support. Some of the Marvell based devices may require this as well.
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Stefan Roese <sr@denx.de>
Willy Tarreau [Tue, 3 Jul 2018 16:10:31 +0000 (12:10 -0400)]
tools: kwboot: properly quit when read() returns 0
When kwboot is attached to a terminal which disappears such as one
connected via an unplugged USB cable, read() returns 0, making kwboot
loop until a key is pressed in the terminal. The only case where read()
may return 0 here is when the terminal is closed anyway, so let's
properly handle this one and report is similar to other errors.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Willy Tarreau [Tue, 3 Jul 2018 16:10:30 +0000 (12:10 -0400)]
tools: kwboot: unbreak terminal-only mode
Commit 84899e2 ("tools/kwboot: Sync with latest barebox version to
support Armada XP") accidently broke the terminal-only mode (-t) by
removing the test on the bootmsg. Thus even when trying to use kwboot
as a plain terminal, it asks to reboot the target.
This commit simply reintroduces the lost test so that it is possible
again to use kwboot to attach to the target system's console.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Mon, 25 Jun 2018 10:34:57 +0000 (22:34 +1200)]
ARM: kirkwood: add SBx81LIFXCAT board
This is a series of line cards for Allied Telesis's SBx8100 chassis
switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards
cards collectively referred to as SBx81LIFXCAT in u-boot.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Nettleton [Thu, 21 Jun 2018 09:35:49 +0000 (12:35 +0300)]
arm: mvebu: clearfog: add u-boot, dm-spl tag for spi
This is required so SPL and u-boot can boot from spi
flash devices that use the dm drivers.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: use -u-boot.dtsi]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Thu, 14 Jun 2018 15:17:54 +0000 (18:17 +0300)]
arm: mvebu: helios4: remove duplicate sdhci pins node
The same pinctrl node appears in the solidrun-microsom dtsi. Use that
instead.
Cc: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Dennis Gilmore <dennis@ausil.us>
Tested-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Nettleton [Thu, 14 Jun 2018 15:17:53 +0000 (18:17 +0300)]
arm: mvebu: Better align Clearfog dts file with Linux kernel
This makes changes so the u-boot dts file is structured more
similar to the mainline linux dtsi file. It provides a minimal
common dts that can work for most boards based on the ClearFog
platform. Ethernet support is only supported for eth0 however
all devices are left enabled so u-boot can generate and
provide mac addresses for all of the network interfaces.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: rebase on recent changes]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Dennis Gilmore <dennis@ausil.us>
Tested-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Thu, 14 Jun 2018 15:17:52 +0000 (18:17 +0300)]
arm: mvebu: clearfog: use the microsom .dtsi
Use hardware description from the recently introduced microsom .dtsi
file to reduce duplication.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Dennis Gilmore <dennis@ausil.us>
Tested-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Thu, 14 Jun 2018 15:17:51 +0000 (18:17 +0300)]
arm: mvebu: solidrun-microsom: update SPI flash compatible
Add the "spi-flash" compatible string so that the generic sf_probe
driver can probe the SPI flash on the SolidRun SOM.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 7 Aug 2018 07:41:46 +0000 (19:41 +1200)]
configs: kirkwood: Move RTC_MV to DM and Kconfig
Now that there is DM support in the RTC_MV driver update board configs
to use it.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 7 Aug 2018 07:41:45 +0000 (19:41 +1200)]
configs: move RTC_MV config from mv-plug-common.h to boards
To aid in migrating CONFIG_RTC_MV to Kconfig move the definition of it
from mv-plug-common.h to the board config headers that nest it.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 7 Aug 2018 07:41:44 +0000 (19:41 +1200)]
configs: kirkwood: ds109: switch to DM_I2C
Enable DM_I2C and I2C_MVTSWI for the ds109 board.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peng Fan [Tue, 17 Jul 2018 12:38:33 +0000 (20:38 +0800)]
i2c: imx_lpi2c: add uclass api support
Use uclass clk api to get per clk when CONFIG_CLK enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Peng Fan [Tue, 17 Jul 2018 12:38:32 +0000 (20:38 +0800)]
i2c-mux: pca954x: support pca9646 i2c switch
Add the PCA9646 support, which is 2-wire bus switch and buffered 4-channel.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:27 +0000 (21:56 +0300)]
mvebu: clearfog: use kconfig symbols to select boot device
This allows selection of the boot device at build time without source
code modification.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:26 +0000 (21:56 +0300)]
mvebu: support UART boot image
The kwboot utility can use the generated image to boot mvebu SoCs from
UART.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:25 +0000 (21:56 +0300)]
mvebu: select boot device at SoC level
Move the gdsys Controlcenter DC specific build time kwbimage.cfg
generation code into the mach-mvebu/ directory to be shared by all 32bit
mvebu platforms.
Remove board specific kwbimage.cfg files, and use the generated one
instead. These files are all identical, with two exceptions. Clearfog
and Helios4 use the sdio boot device, whereas all others use spi. Update
the defconfigs for the exceptional boards to generate the same
kwbimage.cfg as before.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:24 +0000 (21:56 +0300)]
mvebu: consolidate SPL boot device config symbols
Use MVEBU_SPL_BOOT_DEVICE_* to select between SPI and MMC, instead of
board specific symbols. This commit enables the boot device selection
menu to all mvebu platforms, but it is only effective on Turris Omnia
and gdsys Controlcenter DC platforms. A following commit will enable
boot selection for other platforms.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:23 +0000 (21:56 +0300)]
mvebu: a38x: drop duplicate platform id symbols
Use generic mvebu Kconfig symbols like all other mvebu boards.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 18 Jun 2018 18:56:22 +0000 (21:56 +0300)]
mvebu: turris_omnia: use u-boot-spl-dtb.bin
u-boot-spl.bin and u-boot-spl-dtb.bin are identical when building the
turris_omnia_defconfig. This commit makes Turris Omnia consistent with
all other mvebu boards.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Peng Fan [Fri, 27 Jul 2018 02:20:39 +0000 (10:20 +0800)]
dm: power-domain: query power domain after get device
This is to test power_domain_on in device_probe.
If the device has a power-domain property, enable it
when probe the device. So add the test to check
whether it is powered on or not.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Peng Fan [Fri, 27 Jul 2018 02:20:38 +0000 (10:20 +0800)]
dm: core: device: enable power domain in probe
Enable power domain associated with the device when probe.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Peng Fan [Fri, 27 Jul 2018 02:20:37 +0000 (10:20 +0800)]
power: Add CONFIG_SPL_POWER_DOMAIN config
Add CONFIG_SPL_POWER_DOMAIN config entry.
Build drivers/power/domain if this config is selected.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Peng Fan [Fri, 27 Jul 2018 02:20:36 +0000 (10:20 +0800)]
power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined
Add dummy functions when CONFIG_POWER_DOMAIN not defined.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Michal Simek [Tue, 24 Jul 2018 14:27:00 +0000 (16:27 +0200)]
arm64: zynqmp: Add support for Avnet Ultra96
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
and point to origin internal board name.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Luis Araneda [Tue, 24 Jul 2018 15:31:19 +0000 (11:31 -0400)]
arm: zynq: add support for the zybo z7 board
The board is manufactured by Digilent
Main features:
- Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20)
- RAM: 1 GB DDR3L
- FLASH: 16 MB QSPI
- 1 Gbps Ethernet
- USB 2.0
- microSD slot
- Pcam camera connector
- HDMI Tx and Rx
- Audio codec: stereo out, stereo in, mic
- 5 (Z7-10) or 6 (Z7-20) Pmod ports
- 6 push-buttons, 4 switches, 5 LEDs
- 1 (Z7-10) or 2 (Z7-20) RGB LEDs
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Fri, 20 Jul 2018 09:41:38 +0000 (15:11 +0530)]
Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq
This patch moves the the config SYS_MALLOC_LEN to
Kconfig. It will be just for Zynq arch and to do
will be for all other archs.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 24 Jul 2018 10:45:29 +0000 (12:45 +0200)]
arm64: zynqmp: Enable soft gpio driver for zcu102 and zcu100
Enable soft gpio driver for zcu102 and zcu100.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Vipul Kumar [Fri, 20 Jul 2018 09:06:49 +0000 (14:36 +0530)]
gpio: zynq: Used platdata structure for storing static data instead of priv
This patch used platdata structure instead of priv for storing static
information read from DT.
Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 23 Jul 2018 06:34:43 +0000 (08:34 +0200)]
microblaze: Add missing quotes around XILINX_MICROBLAZE0_HW_VER
This issue is reported by kconfiglib:
warning: style: quotes recommended around default value for string
symbol XILINX_MICROBLAZE0_HW_VER (defined at
board/xilinx/microblaze-generic/Kconfig:37)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 20 Jul 2018 08:17:17 +0000 (10:17 +0200)]
arm: zynq: Fix indentation for zynq-cse targets
Trivial DT style fixes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 20 Jul 2018 08:16:21 +0000 (10:16 +0200)]
arm: zynq: Remove fclk-enable property for cse-nor target
Mini cse NOR configuration is running without PL that's why there is no
reason to enable clock to PL.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>