review.tizen.org Git - platform/kernel/linux-starfive.git/log

wifi: ath12k: hal: add ab parameter to macros using it

It's considered evil if a macro is using a variable but not having the variable
as a parameter. So add the ab parameter to macros using that.

No functional changes.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221220120655.19389-2-kvalo@kernel.org

wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup

crypto_alloc_shash() allocates resources, which should be released by
crypto_free_shash(). When ath11k_peer_find() fails, there has memory
leak. Add missing crypto_free_shash() to fix this.

Fixes: 243874c64c81 ("ath11k: handle RX fragments")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230102081142.3937570-1-linmq006@gmail.com

wifi: ath11k: fix ce memory mapping for ahb devices

Currently ath11k_ahb module is not loaded successfully and the wifi
interface is not created. Kernel trace is seen while loading the
ath11k_ahb module. The issue is seen in all ath11k AHB devices except
in IPQ5018.

This happens because in ath11k_ahb_probe(), ab->mem_ce is initialized
with the value of ab->mem. However, at this instant ab->mem is not
yet set.

Later, during write to a particular memory via ath11k_ahb_write32()
this ab->mem_ce is used with particular offset. Since ab->mem_ce is
not set properly this possibly leads to memory conflict to handle
kernel paging request and the below trace is seen.

[   93.035047] Unable to handle kernel paging request at virtual address ffff800100a00000
[   93.035083] Mem abort info:
[   93.041869]   ESR = 0x0000000096000045
[   93.044561]   EC = 0x25: DABT (current EL), IL = 32 bits
[   93.048377]   SET = 0, FnV = 0
[   93.053840]   EA = 0, S1PTW = 0
[   93.056704]   FSC = 0x05: level 1 translation fault
[   93.059745] Data abort info:
[   93.064603]   ISV = 0, ISS = 0x00000045
[   93.067729]   CM = 0, WnR = 1
[   93.071287] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000042219000
[   93.074409] [ffff800100a00000] pgd=100000007ffff003, p4d=100000007ffff003, pud=0000000000000000
[   93.081195] Internal error: Oops: 0000000096000045 [#1] PREEMPT SMP
[   93.089598] Modules linked in: ath11k_ahb ath11k_pci ath11k qmi_helpers
[   93.095851] CPU: 2 PID: 66 Comm: kworker/u8:3 Not tainted 6.1.0-rc8-wt-ath-658126-g58e4b9df840c-dirty #2
[   93.102454] Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK14 (DT)
[   93.112171] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k]
[   93.118856] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   93.126838] pc : ath11k_ahb_write32+0xc/0x18 [ath11k_ahb]
[   93.133520] lr : ath11k_hal_srng_setup+0x860/0x8f0 [ath11k]
[   93.139075] sp : ffff80000aaebb70
[   93.144452] x29: ffff80000aaebb70 x28: 0000000000000020 x27: ffff80000aaebc50
[   93.147934] x26: ffff000004923750 x25: ffff000004921200 x24: ffff000004928000
[   93.155051] x23: 0000000000000020 x22: ffff000004930000 x21: ffff000004923200
[   93.162170] x20: ffff000004920000 x19: 00000000eea00000 x18: ffff0000049200f0
[   93.169288] x17: 0000000000000000 x16: 0000000000000000 x15: 000000000000025e
[   93.176405] x14: ffff000003c414f0 x13: 0000000000000000 x12: 0000000000000008
[   93.183524] x11: ffff000003c41488 x10: 0000000000000040 x9 : 0000000000000000
[   93.190641] x8 : ffff80000a9dd100 x7 : 0000000000000000 x6 : 000000000000003f
[   93.197759] x5 : ffff800100a00400 x4 : ffff8000031f4018 x3 : 0000000000000004
[   93.204877] x2 : 0000000047b62000 x1 : ffff800100a00000 x0 : ffff800012000000
[   93.211996] Call trace:
[   93.219104]  ath11k_ahb_write32+0xc/0x18 [ath11k_ahb]
[   93.221366]  ath11k_ce_init_ring+0x184/0x278 [ath11k]
[   93.226576]  ath11k_ce_init_pipes+0x4c/0x1a0 [ath11k]
[   93.231610]  ath11k_core_qmi_firmware_ready+0x3c/0x568 [ath11k]
[   93.236646]  ath11k_qmi_driver_event_work+0x168/0x4f8 [ath11k]
[   93.242376]  process_one_work+0x144/0x350
[   93.248275]  worker_thread+0x120/0x430
[   93.252352]  kthread+0xf4/0x110
[   93.255997]  ret_from_fork+0x10/0x20
[   93.259043] Code: d503201f f94e1c00 8b214001 d50332bf (b9000022)
[   93.262863] ---[ end trace 0000000000000000 ]---

However, for the device IPQ5018 ath11k_hw_params .ce_remap is
defined. This parameter is used to recalculate ab->mem_ce and hence,
this issue is not seen in IPQ5018.

Hence, fix this by initializing ab->mem_ce after ab->mem is set.
ab->mem is set inside the ath11k_ahb_setup_resources() therefore
initialize ab->mem_ce after ath11k_ahb_setup_resources().

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Fixes: b42b3678c91f ("wifi: ath11k: remap ce register space for IPQ5018")

Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230113063209.7256-1-quic_rajkbhag@quicinc.com

wifi: ath10k: Remove the unused function ath10k_ce_shadow_src_ring_write_index_set()

The function ath10k_ce_shadow_src_ring_write_index_set is defined in the
ce.c file, but not called elsewhere, so remove this unused function.

drivers/net/wireless/ath/ath10k/ce.c:212:1: warning: unused function 'ath10k_ce_shadow_dest_ring_write_index_set'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3519
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221219132041.91418-1-jiapeng.chong@linux.alibaba.com

wifi: ath11k: add channel 177 into 5 GHz channel list

Add support for the 5 GHz channel 177 with center frequency 5885 MHz and
operating class 125 per IEEE Std 802.11ax-2021, Table E-4.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221220101912.30816-1-quic_wgong@quicinc.com

wifi: ath11k: Add support to configure FTM responder role

Fine Timing Measurement(FTM) support is used to measure round trip
time between two nodes.

Enable FTM responder feature using hw_params on supported device.
Since FTM functionality is offloaded to firmware, adding the
interface allows user space to enable or disable FTM responder.
Also add support for advertising the same in extended capabilities.

QCA6390, WCN6855 and WCN6750 do not support this feature.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221220044435.10506-1-quic_rajkbhag@quicinc.com

wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()

Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.

Found by a modified version of syzkaller.

BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104124130.10996-1-linuxlovemin@yonsei.ac.kr

wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails

Syzkaller detected a memory leak of skbs in ath9k_hif_usb_rx_stream().
While processing skbs in ath9k_hif_usb_rx_stream(), the already allocated
skbs in skb_pool are not freed if ath9k_hif_usb_rx_stream() fails. If we
have an incorrect pkt_len or pkt_tag, the input skb is considered invalid
and dropped. All the associated packets already in skb_pool should be
dropped and freed. Added a comment describing this issue.

The patch also makes remain_skb NULL after being processed so that it
cannot be referenced after potential free. The initialization of hif_dev
fields which are associated with remain_skb (rx_remain_len,
rx_transfer_len and rx_pad_len) is moved after a new remain_skb is
allocated.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 6ce708f54cc8 ("ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream")
Fixes: 44b23b488d44 ("ath9k: hif_usb: Reduce indent 1 column")
Reported-by: syzbot+e9632e3eb038d93d6bc6@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104123615.51511-1-pchelkin@ispras.ru

wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function

It is stated that ath9k_htc_rx_msg() either frees the provided skb or
passes its management to another callback function. However, the skb is
not freed in case there is no another callback function, and Syzkaller was
able to cause a memory leak. Also minor comment fix.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+e008dccab31bd3647609@syzkaller.appspotmail.com
Reported-by: syzbot+6692c72009680f7c4eb2@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104123546.51427-1-pchelkin@ispras.ru

wifi: ath11k: debugfs: fix to work with multiple PCI devices

ath11k fails to load if there are multiple ath11k PCI devices with same name:

ath11k_pci 0000:01:00.0: Hardware name qcn9074 hw1.0
debugfs: Directory 'ath11k' with parent '/' already present!
ath11k_pci 0000:01:00.0: failed to create ath11k debugfs
ath11k_pci 0000:01:00.0: failed to create soc core: -17
ath11k_pci 0000:01:00.0: failed to init core: -17
ath11k_pci: probe of 0000:01:00.0 failed with error -17

Fix this by creating a directory for each ath11k device using schema
<bus>-<devname>, for example "pci-0000:06:00.0". This directory created under
the top-level ath11k directory, for example /sys/kernel/debug/ath11k.

The reference to the toplevel ath11k directory is not stored anymore within ath11k, instead
it's retrieved using debugfs_lookup(). If the directory does not exist it will
be created. After the last directory from the ath11k directory is removed, for
example when doing rmmod ath11k, the empty ath11k directory is left in place,
it's a minor cosmetic issue anyway.

Here's an example hierarchy with one WCN6855:

ath11k
`-- pci-0000:06:00.0
    |-- mac0
    |   |-- dfs_block_radar_events
    |   |-- dfs_simulate_radar
    |   |-- ext_rx_stats
    |   |-- ext_tx_stats
    |   |-- fw_dbglog_config
    |   |-- fw_stats
    |   |   |-- beacon_stats
    |   |   |-- pdev_stats
    |   |   `-- vdev_stats
    |   |-- htt_stats
    |   |-- htt_stats_reset
    |   |-- htt_stats_type
    |   `-- pktlog_filter
    |-- simulate_fw_crash
    `-- soc_dp_stats

I didn't have a test setup where I could connect multiple ath11k devices to the
same the host, so I have only tested this with one device.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1

Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221220121231.20120-1-kvalo@kernel.org

wifi: ath9k: remove most hidden macro dependencies on ah

Adds an explicit _ah parameter to most macros that previously had a
hidden dependency on ah. This makes the code more compliant with the
style guide.

This change does not appear to affect the final binary.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/c8369317-cf84-f0e3-fe8-9b6e22e43a6a@ucalgary.ca

wifi: ath11k: fix monitor mode bringup crash

When the interface is brought up in monitor mode, it leads
to NULL pointer dereference crash. This crash happens when
the packet type is extracted for a SKB. This extraction
which is present in the received msdu delivery path,is
not needed for the monitor ring packets since they are
all RAW packets. Hence appending the flags with
"RX_FLAG_ONLY_MONITOR" to skip that extraction.

Observed calltrace:

Unable to handle kernel NULL pointer dereference at virtual address
0000000000000064
Mem abort info:
  ESR = 0x0000000096000004
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x04: level 0 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000
[0000000000000064] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: ath11k_pci ath11k qmi_helpers
CPU: 2 PID: 1781 Comm: napi/-271 Not tainted
6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6
Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k]
lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k]
sp : ffff80000ef5bb10
x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0
x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000
x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600
x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006
x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143
x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8
x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff
x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052
Call trace:
ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k]
ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k]
ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k]
ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k]
ath11k_dp_service_srng+0x234/0x338 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k]
__napi_poll+0x5c/0x190
napi_threaded_poll+0xf0/0x118
kthread+0xf4/0x110
ret_from_fork+0x10/0x20

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Reported-by: Florian Schmidt <florian@fls.name>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216573
Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221129142532.23421-1-quic_nmaran@quicinc.com

wifi: ath11k: Fix scan request param frame size warning

Following warning was observed

drivers/net/wireless/ath/ath11k/mac.c:2351:1: warning: the frame
size of 1184 bytes is larger than 1024 bytes [-Wframe-larger-than=]

A local variable is declared with a size larger than 1024 bytes
this causing a compilation warning. Change the local variable to
heap memory to fix the warning.

Tested-on: IPQ8074 AHB WLAN.HK.2.7.0.1-01701-QCAHKSWPL_SILICONZ-1 v2

Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221205192125.13533-1-quic_kathirve@quicinc.com

wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()

This patch fixes a use-after-free in ath9k that occurs in
ath9k_hif_usb_disconnect() when ath9k_destroy_wmi() is trying to access
'drv_priv' that has already been freed by ieee80211_free_hw(), called by
ath9k_htc_hw_deinit(). The patch moves ath9k_destroy_wmi() before
ieee80211_free_hw(). Note that urbs from the driver should be killed
before freeing 'wmi' with ath9k_destroy_wmi() as their callbacks will
access 'wmi'.

Found by a modified version of syzkaller.

==================================================================
BUG: KASAN: use-after-free in ath9k_destroy_wmi+0x38/0x40
Read of size 8 at addr ffff8881069132a0 by task kworker/0:1/7

CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x8e/0xd1
print_address_description.constprop.0.cold+0x93/0x334
? ath9k_destroy_wmi+0x38/0x40
? ath9k_destroy_wmi+0x38/0x40
kasan_report.cold+0x83/0xdf
? ath9k_destroy_wmi+0x38/0x40
ath9k_destroy_wmi+0x38/0x40
ath9k_hif_usb_disconnect+0x329/0x3f0
? ath9k_hif_usb_suspend+0x120/0x120
? usb_disable_interface+0xfc/0x180
usb_unbind_interface+0x19b/0x7e0
? usb_autoresume_device+0x50/0x50
device_release_driver_internal+0x44d/0x520
bus_remove_device+0x2e5/0x5a0
device_del+0x5b2/0xe30
? __device_link_del+0x370/0x370
? usb_remove_ep_devs+0x43/0x80
? remove_intf_ep_devs+0x112/0x1a0
usb_disable_device+0x1e3/0x5a0
usb_disconnect+0x267/0x870
hub_event+0x168d/0x3950
? rcu_read_lock_sched_held+0xa1/0xd0
? hub_port_debounce+0x2e0/0x2e0
? check_irq_usage+0x860/0xf20
? drain_workqueue+0x281/0x360
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x92b/0x1460
? pwq_dec_nr_in_flight+0x330/0x330
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x95/0xe00
? __kthread_parkme+0x115/0x1e0
? process_one_work+0x1460/0x1460
kthread+0x3a1/0x480
? set_kthread_struct+0x120/0x120
ret_from_fork+0x1f/0x30

The buggy address belongs to the page:
page:ffffea00041a44c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106913
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), pid 7, ts 38347963444, free_ts 41399957635
prep_new_page+0x1aa/0x240
get_page_from_freelist+0x159a/0x27c0
__alloc_pages+0x2da/0x6a0
alloc_pages+0xec/0x1e0
kmalloc_order+0x39/0xf0
kmalloc_order_trace+0x19/0x120
__kmalloc+0x308/0x390
wiphy_new_nm+0x6f5/0x1dd0
ieee80211_alloc_hw_nm+0x36d/0x2230
ath9k_htc_probe_device+0x9d/0x1e10
ath9k_htc_hw_init+0x34/0x50
ath9k_hif_usb_firmware_cb+0x25f/0x4e0
request_firmware_work_func+0x131/0x240
process_one_work+0x92b/0x1460
worker_thread+0x95/0xe00
kthread+0x3a1/0x480
page last free stack trace:
free_pcp_prepare+0x3d3/0x7f0
free_unref_page+0x1e/0x3d0
device_release+0xa4/0x240
kobject_put+0x186/0x4c0
put_device+0x20/0x30
ath9k_htc_disconnect_device+0x1cf/0x2c0
ath9k_htc_hw_deinit+0x26/0x30
ath9k_hif_usb_disconnect+0x2d9/0x3f0
usb_unbind_interface+0x19b/0x7e0
device_release_driver_internal+0x44d/0x520
bus_remove_device+0x2e5/0x5a0
device_del+0x5b2/0xe30
usb_disable_device+0x1e3/0x5a0
usb_disconnect+0x267/0x870
hub_event+0x168d/0x3950
process_one_work+0x92b/0x1460

Memory state around the buggy address:
ffff888106913180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888106913200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888106913280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888106913300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888106913380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221205014308.1617597-1-linuxlovemin@yonsei.ac.kr

wifi: ath11k: add ipq5018 device support

ipq5018 is a ahb 2ghz device, enable the compatible support for
ipq5018 in ahb.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-9-quic_kathirve@quicinc.com

wifi: ath11k: add new hw ops for IPQ5018 to get rx dest ring hashmap

The Destination ring control register is different
for IPQ5018 when compared to IPQ8074/IPQ6018/QCN9074.
Hence create a new hw ops to fetch the hash ring map
for different device variants. ipq5018 hw ops
is similar to qcn9074 except for this change, so reuse
all the qcn9074 ops for ipq5018.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-8-quic_kathirve@quicinc.com

wifi: ath11k: initialize hw_ops for IPQ5018

The ipq5018_ops is initialized for IPQ5018. This is different from
other platforms.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-7-quic_kathirve@quicinc.com

wifi: ath11k: update hal srng regs for IPQ5018

IPQ5018 hal srng register address & offsets are not
similar to IPQ8074/IPQ6018/QCN9074, hence define a
new set of srng register group data for IPQ5018.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-6-quic_kathirve@quicinc.com

wifi: ath11k: remap ce register space for IPQ5018

In IPQ5018 ce register space is moved out of wcss unlike
ipq8074 or ipq6018 and the space is not contiguous,
hence remap the CE registers to a new space to access them.

Register read/write is modified to check if the register to be written
falls in the CE register space and corresponding register is written.
Also adjust the interrupt register address to ce irq enable/disable.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-5-quic_kathirve@quicinc.com

wifi: ath11k: update ce configurations for IPQ5018

IPQ5018 is a single pdev device. Update host
and target CE configurations accordingly.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-4-quic_kathirve@quicinc.com

wifi: ath11k: update hw params for IPQ5018

Add new compatible string for IPQ5018 and add
required hw params for IPQ5018. The hw descriptors size and
datapath ops are similar to QCN9074, hence reuse the same.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-3-quic_kathirve@quicinc.com

dt: bindings: net: ath11k: add IPQ5018 compatible

Add IPQ5018 device support for ath11k.

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-2-quic_kathirve@quicinc.com

wifi: ath11k: Fix race condition with struct htt_ppdu_stats_info

A crash happens when running the traffic with multiple clients:

Crash Signature : Unable to handle kernel paging request at
virtual address ffffffd700970918 During the crash, PC points to
"ieee80211_tx_rate_update+0x30/0x68 [mac80211]"
LR points to "ath11k_dp_htt_htc_t2h_msg_handler+0x5a8/0x8a0 [ath11k]".

Struct ppdu_stats_info is allocated and accessed from event callback via copy
engine tasklet, this has a problem when freeing it from ath11k_mac_op_stop().

Use data_lock during entire ath11k_dp_htt_get_ppdu_desc() call to protect
struct htt_ppdu_stats_info access and to avoid race condition when accessing it
from ath11k_mac_op_stop().

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221124071104.22506-1-quic_kathirve@quicinc.com

wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices

ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first
supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP
and station; WCN7850 supports only station mode. Monitor mode is not
(yet) supported. Only PCI bus devices are supported.

ath12k is forked from an earlier version of ath11k. It was simpler to
have a "clean start" for the new generation and not try to share the
code with ath11k. This makes maintenance easier and avoids major
changes in ath11k, which would have significantly increased the risk
of regressions in existing setups.

ath12k uses le32 and cpu_to_le32() macros to handle endian
conversions, instead of using the firmware byte swap feature utilized
by ath11k. There is only one kernel module, named ath12k.ko.

Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but
work is ongoing to add EHT mode (IEEE 802.11be) support.

The size of the driver is ~41 kLOC and 45 files. To make the review
easier, this initial version of ath12k does not support Device Tree,
debugfs or any other extra features. Those will be added later, after
ath12k is accepted to upstream.

The driver is build tested by Intel's kernel test robot with both GCC
and Clang. Sparse reports no warnings. The driver is mostly free of
checkpatch warnings, albeit few of the warnings are omitted on
purpose, list of them here:

https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52

The driver has had multiple authors who are listed in alphabetical
order below.

Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Co-developed-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git

ath.git patches for v6.2. Major changes:

ath10k

* store WLAN firmware version in SMEM image table

wifi: rtw88: fix race condition when doing H2C command

For SDIO/USB interface, since the tranferring speed is slower than
that in PCIE, it may have race condition when the driver sets down
H2C command to the FW.

In the function rtw_fw_send_h2c_command, before the patch, box_reg
is written first, then box_ex_reg is written. FW starts to work and
fetch the value of box_ex_reg, when the most significant byte of
box_reg(4 bytes) is written. Meanwhile, for SDIO/USB interface,
since the transferring speed is slow, the driver is still in writing
the new value of box_ex_reg through the bus, and FW may get the
wrong value of box_ex_reg at the moment.

To prevent the above driver/FW racing situation, box_ex_reg is
written first then box_reg. Furthermore, it is written in 4 bytes at
a time, instead of written in one byte one by one. It can increase
the speed for SDIO/USB interface.

Signed-off-by: Ji-Pin Jou <neo_jou@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221124064442.28042-1-pkshih@realtek.com

wifi: b43: remove reference to removed config B43_PCMCIA

Commit 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
removes the config B43_PCMCIA.

Clean up the last reference to this removed config B43_PCMCIA in the
b43_print_driverinfo() function.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221122131248.23738-1-lukas.bulwahn@gmail.com

wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changed

Commit a8b5aef2cca1 ("wifi: rtl8xxxu: gen2: Enable 40 MHz channel width")
introduced a line where the pointer returned by ieee80211_find_sta() is
used after rcu_read_unlock().

Move rcu_read_unlock() a bit lower to fix this.

Fixes: a8b5aef2cca1 ("wifi: rtl8xxxu: gen2: Enable 40 MHz channel width")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3c82ad09-7593-3be1-1d2c-e58505fb43cb@gmail.com

wifi: plfxlc: fix potential memory leak in __lf_x_usb_enable_rx()

urbs does not be freed in exception paths in __lf_x_usb_enable_rx().
That will trigger memory leak. To fix it, add kfree() for urbs within
"error" label. Compile tested only.

Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221119051900.1192401-1-william.xuanziyang@huawei.com

wifi: carl9170: Replace zero-length array of trailing structs with flex-array

Zero-length arrays are deprecated[1] and are being replaced with
flexible array members in support of the ongoing efforts to tighten the
FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing
with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3.

Replace zero-length array with flexible-array member.

This results in no differences in binary output.

[1] https://github.com/KSPP/linux/issues/78

Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221118211146.never.395-kees@kernel.org

wifi: ath10k: Store WLAN firmware version in SMEM image table

In a SoC based solution, it would be useful to know the versions of the
various binary firmware blobs the system is running on. On a QCOM based
SoC, this info can be obtained from socinfo debugfs infrastructure. For
this to work, respective subsystem drivers have to export the firmware
version information to an SMEM based version information table.

Having firmware version information at one place will help quickly
figure out the firmware versions of various subsystems on the device
instead of going through builds/logs in an event of a system crash.

Fill WLAN firmware version information in SMEM version table to be
printed as part of socinfo debugfs infrastructure on a Qualcomm based
SoC.

This change is applicable only for SNOC/QMI based targets.

Example:
cat /sys/kernel/debug/qcom_socinfo/cnss/name
QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221117180534.2267-1-quic_youghand@quicinc.com

wifi: p54: Replace zero-length array of trailing structs with flex-array

Zero-length arrays are deprecated[1] and are being replaced with
flexible array members in support of the ongoing efforts to tighten the
FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing
with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3.

Replace zero-length array with flexible-array member.

This results in no differences in binary output (most especially because
struct pda_antenna_gain is unused). The struct is kept for future
reference.

[1] https://github.com/KSPP/linux/issues/78

Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221118234240.gonna.369-kees@kernel.org

wifi: rtw89: fix physts IE page check

The index RTW89_PHYSTS_BITMAP_NUM is not a valid physts IE page.
So, fix the check condition.

Fixes: eb4e52b3f38d ("rtw89: fix incorrect channel info during scan")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221118042322.26794-1-pkshih@realtek.com

wifi: rtw89: avoid inaccessible IO operations during doing change_interface()

During doing change_interface(), hardware is power-off, so some components
are inaccessible and return error. This causes things unexpected, and we
don't have a warning message for that. So, ignore some IO operations in
this situation, and add a warning message to indicate something wrong.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221117085235.53777-1-pkshih@realtek.com

wifi: rtw89: switch BANDEDGE and TX_SHAPE based on OFDMA trigger frame

There are some registers for transmit waveform control, two of them used
in this change are for BANDEDGE and TX_SHAPE control. BANDEDGE controls
whether to apply band edge filter to transmit waveform. TX_SHAPE controls
whether to apply triangular mask to transmit waveform. It is found for
some chip, these two should be turned off during OFDMA UL traffic for
better performance.

Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221117063001.42967-3-pkshih@realtek.com

wifi: rtw89: read CFO from FD or preamble CFO field of phy status ie_type 1 accordingly

Add macro to get FD(frequency domain) CFO field from ie_type 1, and correct
the naming for preamble CFO field. Each IC could assign the CFO source to
either FD CFO or preamble CFO in chip_info. Based on the suggestion from HW
designer, rtw8852b and its derived versions will have better CFO tracking
performance with FD CFO.

Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221117063001.42967-2-pkshih@realtek.com

wifi: rtw89: 8852b: correct TX power controlled by BT-coexistence

When coexistence mechanism is under free-run mode, it could adjust WiFi
and BT TX power to avoid interference with each other. For other cases,
it should keep original TX power from regular predefined tables, so
set correct values to 255 for these cases.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221117061832.42057-1-pkshih@realtek.com

wifi: brcmfmac: Use struct_size() in code ralated to struct brcmf_dload_data_le

Prefer struct_size() over open-coded versions of idiom:

sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count

where count is the max number of items the flexible array is supposed to
contain.

In this particular case, in the open-coded version sizeof(typeof-flex-array-elements)
is implicit in _count_ because the type of the flex array data is u8:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h:941:
941 struct brcmf_dload_data_le {
942         __le16 flag;
943         __le16 dload_type;
944         __le32 len;
945         __le32 crc;
946         u8 data[];
947 };

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/41845ad3660ed4375f0c03fd36a67b2e12fafed5.1668548907.git.gustavoars@kernel.org

wifi: brcmfmac: replace one-element array with flexible-array member in struct brcmf_dload_data_le

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct brcmf_dload_data_le.

Important to mention is that doing a build before/after this patch results
in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/230
Link: https://github.com/KSPP/linux/issues/79
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/905f5b68cf93c812360d081caae5b15221db09b6.1668548907.git.gustavoars@kernel.org

wifi: brcmfmac: Use struct_size() and array_size() in code ralated to struct brcmf_gscan_config

Prefer struct_size() over open-coded versions of idiom:

sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count

where count is the max number of items the flexible array is supposed to
contain.

Also, use array_size() in call to memcpy().

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/de0226a549c8d000d8974e207ede786220a3df1a.1668466470.git.gustavoars@kernel.org

wifi: brcmfmac: Replace one-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct brcmf_gscan_config.

Important to mention is that doing a build before/after this patch results
in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/241
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7694550aa9a2753a73a687f61af9441c8cf52fd7.1668466470.git.gustavoars@kernel.org

Merge tag 'rxrpc-next-20221116' of git://git./linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Fix oops and missing config conditionals

The patches that were pulled into net-next previously[1] had some issues
that this patchset fixes:

(1) Fix missing IPV6 config conditionals.

(2) Fix an oops caused by calling udpv6_sendmsg() directly on an AF_INET
     socket.

(3) Fix the validation of network addresses on entry to socket functions
     so that we don't allow an AF_INET6 address if we've selected an
     AF_INET transport socket.

Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix napi_disable() logic error

Dan reported a new warning after my recent patch:

New smatch warnings:
net/core/dev.c:6409 napi_disable() error: uninitialized symbol 'new'.

Indeed, we must first wait for STATE_SCHED and STATE_NPSVC to be cleared,
to make sure @new variable has been initialized properly.

Fixes: 4ffa1d1c6842 ("net: adopt try_cmpxchg() in napi_{enable|disable}()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: uninitialized variable in rxrpc_send_ack_packet()

The "pkt" was supposed to have been deleted in a previous patch. It
leads to an uninitialized variable bug.

Fixes: 72f0c6fb0579 ("rxrpc: Allocate ACK records at proposal and queue for transmission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: fix rxkad_verify_response()

The error handling for if skb_copy_bits() fails was accidentally deleted
so the rxkad_decrypt_ticket() function is not called.

Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: remove cpu_relax in mtk_pending_work

Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is
set only in mtk_pending_work() and it runs holding rtnl lock

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: do not overwrite mtu configuration running reset routine

Restore user configured MTU running mtk_hw_init() during tx timeout routine
since it will be overwritten after a hw reset.

Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 9ea4d311509f ("net: ethernet: mediatek: add the whole ethernet reset into the reset process")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: avoid a null pointer dereference

Dan Carpenter reported that Smatch found an instance where a pointer
which had previously been assumed could be null (as indicated by a
null check) was later dereferenced without a similar check.

In practice this doesn't lead to a problem because currently the
pointers used are all non-null. Nevertheless this patch addresses
the reported problem.

In addition, I spotted another bug that arose in the same commit.
When the command to initialize a routing table memory region was
added, the number of entries computed for the non-hashed table
was wrong (it ended up being a Boolean rather than the count
intended). This bug is fixed here as well.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/kernel-janitors/Y3OOP9dXK6oEydkf@kili
Tested-by: Caleb Connolly <caleb.connolly@linaro.com>
Fixes: 5cb76899fb47 ("net: ipa: reduce arguments to ipa_table_init_add()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-next-2022-11-18' of git://git./linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.2

Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.

Major changes:

ath11k

* support configuring channel dwell time during scan

rtw89

* new dynamic header firmware format support

* Wake-over-WLAN support

rtl8xxxu

* enable IEEE80211_HW_SUPPORT_FAST_XMIT
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sctp-vrf'

Xin Long says:

====================
sctp: support vrf processing

This patchset adds the VRF processing in SCTP. Simliar to TCP/UDP,
it includes socket bind and socket/association lookup changes.

For socket bind change, it allows sockets to bind to a VRF device
and allows multiple sockets with the same IP and PORT to bind to
different interfaces in patch 1-3.

For socket/association lookup change, it adds dif and sdif check
in both asoc and ep lookup in patch 4 and 5, and when binding to
nodev, users can decide if accept the packets received from one
l3mdev by setup a sysctl option in patch 6.

Note with VRF support, in a netns, an association will be decided
by src ip + src port + dst ip + dst port + bound_dev_if, and it's
possible for ss to have:

  State       Local Address:Port      Peer Address:Port
   ESTAB     192.168.1.2%vrf-s1:1234
   `- ESTAB   192.168.1.2%veth1:1234   192.168.1.1:1234
   ESTAB     192.168.1.2%vrf-s2:1234
   `- ESTAB   192.168.1.2%veth2:1234   192.168.1.1:1234

See the selftest in patch 7 for more usage.

Also, thanks Carlo for testing this patch series on their use.

v1->v2:
  - In Patch 5, move sctp_sk_bound_dev_eq() definition to net/sctp/
    input.c to avoid a build error when IP_SCTP is disabled, as Paolo
    suggested.
  - In Patch 7, avoid one sleep by disabling the IPv6 dad, and remove
    another sleep by using ss to check if the server's ready, and also
    delete two unncessary sleeps in sctp_hello.c, as Paolo suggested.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: add a selftest for sctp vrf

This patch adds 12 small test cases: 01-04 test for the sysctl
net.sctp.l3mdev_accept. 05-10 test for only binding to a right
l3mdev device, the connection can be created. 11-12 test for
two socks binding to different l3mdev devices at the same time,
each of them can process the packets from the corresponding
peer. The tests run for both IPv4 and IPv6 SCTP.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: add sysctl net.sctp.l3mdev_accept

This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: add dif and sdif check in asoc and ep lookup

This patch at first adds a pernet global l3mdev_accept to decide if it
accepts the packets from a l3mdev when a SCTP socket doesn't bind to
any interface. It's set to 1 to avoid any possible incompatible issue,
and in next patch, a sysctl will be introduced to allow to change it.

Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is
added to check either dif or sdif is equal to sk_bound_dev_if, and to
check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set.
This function is used to match a association or a endpoint, namely
called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match().
All functions that needs updating are:

sctp_rcv():
  asoc:
  __sctp_rcv_lookup()
    __sctp_lookup_association() -> sctp_addrs_lookup_transport()
    __sctp_rcv_lookup_harder()
      __sctp_rcv_init_lookup()
         __sctp_lookup_association() -> sctp_addrs_lookup_transport()
      __sctp_rcv_walk_lookup()
         __sctp_rcv_asconf_lookup()
           __sctp_lookup_association() -> sctp_addrs_lookup_transport()

  ep:
  __sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match()

sctp_connect():
  sctp_endpoint_is_peeled_off()
    __sctp_lookup_association()
      sctp_has_association()
        sctp_lookup_association()
          __sctp_lookup_association() -> sctp_addrs_lookup_transport()

sctp_diag_dump_one():
  sctp_transport_lookup_process() -> sctp_addrs_lookup_transport()

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: add skb_sdif in struct sctp_af

Add skb_sdif function in struct sctp_af to get the enslaved device
for both ipv4 and ipv6 when adding SCTP VRF support in sctp_rcv in
the next patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: check sk_bound_dev_if when matching ep in get_port

In sctp_get_port_local(), when binding to IP and PORT, it should
also check sk_bound_dev_if to match listening sk if it's set by
SO_BINDTOIFINDEX, so that multiple sockets with the same IP and
PORT, but different sk_bound_dev_if can be listened at the same
time.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: check ipv6 addr with sk_bound_dev if set

When binding to an ipv6 address, it calls ipv6_chk_addr() to check if
this address is on any dev. If a socket binds to a l3mdev but no dev
is passed to do this check, all l3mdev and slaves will be skipped and
the check will fail.

This patch is to pass the bound_dev to make sure the devices under the
same l3mdev can be returned in ipv6_chk_addr(). When the bound_dev is
not a l3mdev or l3slave, l3mdev_master_dev_rcu() will return NULL in
__ipv6_chk_addr_and_flags(), it will keep compitable with before when
NULL dev was passed.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: verify the bind address with the tb_id from l3mdev

After binding to a l3mdev, it should use the route table from the
corresponding VRF to verify the addr when binding to an address.

Note ipv6 doesn't need it, as binding to ipv6 address does not
verify the addr with route lookup.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: libwx: Fix dead code for duplicate check

Fix duplicate check on polling timeout.

Fixes: 1efa9bfe58c5 ("net: libwx: Implement interaction with firmware")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: mscc: macsec: do not copy encryption keys

Following 1b16b3fdf675 ("net: phy: mscc: macsec: clear encryption keys when freeing a flow"),
go one step further and instead of calling memzero_explicit on the key
when freeing a flow, simply not copy the key in the first place as it's
only used when a new flow is set up.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-ipa-change-gsi-firmware-load-specification'

Alex Elder says:

====================
net: ipa: change GSI firmware load specification

Currently, GSI firmware must be loaded for IPA before it can be
used--either by the modem, or by the AP.  New hardware supports a
third option, with the bootloader taking responsibility for loading
GSI firmware.  In that case, neither the AP nor the modem needs to
do that.

The first patch in this series deprecates the "modem-init" Device
Tree property in the IPA binding, using a new "qcom,gsi-loader"
property instead.  The second and third implement logic in the code
to support either the "old" or the "new" way of specifying how GSI
firmware is loaded.

The last two patches implement a new value for the "qcom,gsi-loader"
property.  If the value is "skip", neither the AP nor modem needs to
load the GSI firmware.  The first of these patches implements the
change in the IPA binding; the second implements it in the code.
====================

Link: https://lore.kernel.org/r/20221116073257.34010-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: permit GSI firmware loading to be skipped

Define a new value "skip" for the "qcom,gsi-loader" Device Tree
property. If used, it indicates that neither the AP nor the modem
need to load GSI firmware (because it has already been loaded--for
example by the boot loader).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: qcom,ipa: support skipping GSI firmware load

Add a new enumerated value to those defined for the qcom,gsi-loader
property. If the qcom,gsi-loader is "skip", the GSI firmware will
already be loaded, so neither the AP nor modem is required to load
GSI firmware.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: introduce "qcom,gsi-loader" property

Introduce a new way of specifying how the GSI firmware gets loaded
for IPA.  Currently, this is indicated by the presence or absence of
the Boolean "modem-init" Device Tree property.  The new property
must have a value--either "self" or "modem"--which indicates whether
the AP or modem is the GSI firmware loader, respectively.

For legacy systems, the new property will not exist, and the
"modem-init" property will be used.  For newer systems, the
"qcom,gsi-loader" property *must* exist, and must have one of the
two prescribed values.  It is an error to have both properties
defined, and it is an error for the new property to have an
unrecognized value.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: encapsulate decision about firmware load

The GSI layer used for IPA requires firmware to be loaded.

Currently either the AP or the modem loads the firmware,
distinguished by whether the "modem-init" Device Tree
property is defined.

Some newer systems implement a third option. In preparation for
that, encapsulate the code that determines how the GSI firmware
gets loaded in a new function, ipa_firmware_loader().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: qcom,ipa: deprecate modem-init

GSI firmware for IPA must be loaded during initialization, either by
the AP or by the modem.  The loader is currently specified based on
whether the Boolean modem-init property is present.

Instead, use a new property with an enumerated value to indicate
explicitly how GSI firmware gets loaded.  With this in place, a
third approach can be added in an upcoming patch.

The new qcom,gsi-loader property has two defined values:
  - self:   The AP loads GSI firmware
  - modem:  The modem loads GSI firmware
The modem-init property must still be supported, but is now marked
deprecated.

Update the example so it represents the SC7180 SoC, and provide
examples for the qcom,gsi-loader, memory-region, and firmware-name
properties.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: move SCTP_PAD4 and SCTP_TRUNC4 to linux/sctp.h

Move these two macros from net/sctp/sctp.h to linux/sctp.h, so that
it will be enough to include only linux/sctp.h in nft_exthdr.c and
xt_sctp.c. It should not include "net/sctp/sctp.h" if a module does
not have a dependence on SCTP module.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/ef6468a687f36da06f575c2131cd4612f6b7be88.1668526821.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: change to include linux/sctp.h in net/sctp/checksum.h

Currently "net/sctp/checksum.h" including "net/sctp/sctp.h" is
included in quite some places in netfilter and openswitch and
net/sched. It's not necessary to include "net/sctp/sctp.h" if
a module does not have dependence on SCTP, "linux/sctp.h" is
the right one to include.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/ca7ea96d62a26732f0491153c3979dc1c0d8d34a.1668526793.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'implement-devlink-rate-api-and-extend-it'

Michal Wilczynski says:

====================
Implement devlink-rate API and extend it

This patch series implements devlink-rate for ice driver. Unfortunately
current API isn't flexible enough for our use case, so there is a need to
extend it. Some functions have been introduced to enable the driver to
export current Tx scheduling configuration.

Pasting justification for this series from commit implementing devlink-rate
in ice driver(that is a part of this series):

There is a need to support modification of Tx scheduler tree, in the
ice driver. This will allow user to control Tx settings of each node in
the internal hierarchy of nodes. As a result user will be able to use
Hierarchy QoS implemented entirely in the hardware.

This patch implemenents devlink-rate API. It also exports initial
default hierarchy. It's mostly dictated by the fact that the tree
can't be removed entirely, all we can do is enable the user to modify
it. For example root node shouldn't ever be removed, also nodes that
have children are off-limits.

Example initial tree with 2 VF's:

[root@fedora ~]# devlink port function rate show
pci/0000:4b:00.0/node_27: type node parent node_26
pci/0000:4b:00.0/node_26: type node parent node_0
pci/0000:4b:00.0/node_34: type node parent node_33
pci/0000:4b:00.0/node_33: type node parent node_32
pci/0000:4b:00.0/node_32: type node parent node_16
pci/0000:4b:00.0/node_19: type node parent node_18
pci/0000:4b:00.0/node_18: type node parent node_17
pci/0000:4b:00.0/node_17: type node parent node_16
pci/0000:4b:00.0/node_21: type node parent node_20
pci/0000:4b:00.0/node_20: type node parent node_3
pci/0000:4b:00.0/node_14: type node parent node_5
pci/0000:4b:00.0/node_5: type node parent node_3
pci/0000:4b:00.0/node_13: type node parent node_4
pci/0000:4b:00.0/node_12: type node parent node_4
pci/0000:4b:00.0/node_11: type node parent node_4
pci/0000:4b:00.0/node_10: type node parent node_4
pci/0000:4b:00.0/node_9: type node parent node_4
pci/0000:4b:00.0/node_8: type node parent node_4
pci/0000:4b:00.0/node_7: type node parent node_4
pci/0000:4b:00.0/node_6: type node parent node_4
pci/0000:4b:00.0/node_4: type node parent node_3
pci/0000:4b:00.0/node_3: type node parent node_16
pci/0000:4b:00.0/node_16: type node parent node_15
pci/0000:4b:00.0/node_15: type node parent node_0
pci/0000:4b:00.0/node_2: type node parent node_1
pci/0000:4b:00.0/node_1: type node parent node_0
pci/0000:4b:00.0/node_0: type node
pci/0000:4b:00.0/1: type leaf parent node_27
pci/0000:4b:00.0/2: type leaf parent node_27

Let me visualize part of the tree:

                        +---------+
                        |  node_0 |
                        +---------+
                             |
                        +----v----+
                        | node_26 |
                        +----+----+
                             |
                        +----v----+
                        | node_27 |
                        +----+----+
                             |
                    |-----------------|
               +----v----+       +----v----+
               |   VF 1  |       |   VF 2  |
               +----+----+       +----+----+

So at this point there is a couple things that can be done.
For example we could only assign parameters to VF's.

[root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \
                 tx_max 5Gbps

This would cap the VF 1 BW to 5Gbps.

But let's say you would like to create a completely new branch.
This can be done like this:

[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom parent node_0
[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom_1 parent node_custom
[root@fedora ~]# devlink port function rate set \
                 pci/0000:4b:00.0/1 parent node_custom_1

This creates a completely new branch and reassigns VF 1 to it.

A number of parameters is supported per each node: tx_max, tx_share,
tx_priority and tx_weight.
====================

Link: https://lore.kernel.org/r/20221115104825.172668-1-michal.wilczynski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation: Add documentation for new devlink-rate attributes

Provide documentation for newly introduced netlink attributes for
devlink-rate: tx_priority and tx_weight.

Mention the possibility to export tree from the driver.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Add documentation for devlink-rate implementation

Add documentation to a newly added devlink-rate feature. Provide some
examples on how to use the commands, which netlink attributes are
supported and descriptions of the attributes.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Prevent ADQ, DCB coexistence with Custom Tx scheduler

ADQ, DCB might interfere with Custom Tx Scheduler changes that user
might introduce using devlink-rate API.

Check if ADQ, DCB is active, when user tries to change any setting
in exported Tx scheduler tree. If any of those are active block the user
from doing so, and log an appropriate message.

Remove the exported hierarchy if user enable ADQ or DCB.
Prevent ADQ or DCB from getting configured if user already made some
changes using devlink-rate API.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Implement devlink-rate API

There is a need to support modification of Tx scheduler tree, in the
ice driver. This will allow user to control Tx settings of each node in
the internal hierarchy of nodes. As a result user will be able to use
Hierarchy QoS implemented entirely in the hardware.

This patch implemenents devlink-rate API. It also exports initial
default hierarchy. It's mostly dictated by the fact that the tree
can't be removed entirely, all we can do is enable the user to modify
it. For example root node shouldn't ever be removed, also nodes that
have children are off-limits.

Example initial tree with 2 VF's:

[root@fedora ~]# devlink port function rate show

pci/0000:4b:00.0/node_27: type node parent node_26
pci/0000:4b:00.0/node_26: type node parent node_0
pci/0000:4b:00.0/node_34: type node parent node_33
pci/0000:4b:00.0/node_33: type node parent node_32
pci/0000:4b:00.0/node_32: type node parent node_16
pci/0000:4b:00.0/node_19: type node parent node_18
pci/0000:4b:00.0/node_18: type node parent node_17
pci/0000:4b:00.0/node_17: type node parent node_16
pci/0000:4b:00.0/node_21: type node parent node_20
pci/0000:4b:00.0/node_20: type node parent node_3
pci/0000:4b:00.0/node_14: type node parent node_5
pci/0000:4b:00.0/node_5: type node parent node_3
pci/0000:4b:00.0/node_13: type node parent node_4
pci/0000:4b:00.0/node_12: type node parent node_4
pci/0000:4b:00.0/node_11: type node parent node_4
pci/0000:4b:00.0/node_10: type node parent node_4
pci/0000:4b:00.0/node_9: type node parent node_4
pci/0000:4b:00.0/node_8: type node parent node_4
pci/0000:4b:00.0/node_7: type node parent node_4
pci/0000:4b:00.0/node_6: type node parent node_4
pci/0000:4b:00.0/node_4: type node parent node_3
pci/0000:4b:00.0/node_3: type node parent node_16
pci/0000:4b:00.0/node_16: type node parent node_15
pci/0000:4b:00.0/node_15: type node parent node_0
pci/0000:4b:00.0/node_2: type node parent node_1
pci/0000:4b:00.0/node_1: type node parent node_0
pci/0000:4b:00.0/node_0: type node
pci/0000:4b:00.0/1: type leaf parent node_27
pci/0000:4b:00.0/2: type leaf parent node_27

Let me visualize part of the tree:

                    +---------+
                    |  node_0 |
                    +---------+
                         |
                    +----v----+
                    | node_26 |
                    +----+----+
                         |
                    +----v----+
                    | node_27 |
                    +----+----+
                         |
                |-----------------|
           +----v----+       +----v----+
           |   VF 1  |       |   VF 2  |
           +----+----+       +----+----+

So at this point there is a couple things that can be done.
For example we could only assign parameters to VF's.

[root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \
                 tx_max 5Gbps

This would cap the VF 1 BW to 5Gbps.

But let's say you would like to create a completely new branch.
This can be done like this:

[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom parent node_0
[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom_1 parent node_custom
[root@fedora ~]# devlink port function rate set \
                 pci/0000:4b:00.0/1 parent node_custom_1

This creates a completely new branch and reassigns VF 1 to it.

A number of parameters is supported per each node: tx_max, tx_share,
tx_priority and tx_weight.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Add an option to pre-allocate memory for ice_sched_node

devlink-rate API requires a priv object to be allocated when node still
doesn't have a parent. This is problematic, because ice_sched_node can't
be currently created without a parent.

Add an option to pre-allocate memory for ice_sched_node struct. Add
new arguments to ice_sched_add() and ice_sched_add_elems() that allow
for pre-allocation of memory for ice_sched_node struct.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Introduce new parameters in ice_sched_node

To support new devlink-rate API ice_sched_node struct needs to store
a number of additional parameters. This includes tx_max, tx_share,
tx_weight, and tx_priority.

Add new fields to ice_sched_node struct. Add new functions to configure
the hardware with new parameters. Introduce new xarray to identify
nodes uniquely.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Allow to set up parent in devl_rate_leaf_create()

Currently the driver is able to create leaf nodes for the devlink-rate,
but is unable to set parent for them. This wasn't as issue before the
possibility to export hierarchy from the driver. After adding the export
feature, in order for the driver to supply correct hierarchy, it's
necessary for it to be able to supply a parent name to
devl_rate_leaf_create().

Introduce a new parameter 'parent_name' in devl_rate_leaf_create().

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Allow for devlink-rate nodes parent reassignment

Currently it's not possible to reassign the parent of the node using one
command. As the previous commit introduced a way to export entire
hierarchy from the driver, being able to modify and reassign parents
become important. This way user might easily change QoS settings without
interrupting traffic.

Example command:
devlink port function rate set pci/0000:4b:00.0/1 parent node_custom_1

This reassigns leaf node parent to node_custom_1.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Enable creation of the devlink-rate nodes from the driver

Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very
rigid and can't be easily removed. This requires an ability to export
default hierarchy to allow user to modify it. Currently the driver is
only able to create the 'leaf' nodes, which usually represent the vport.
This is not enough for HQoS implemented in Intel hardware.

Introduce new function devl_rate_node_create() that allows for creation
of the devlink-rate nodes from the driver.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Introduce new attribute 'tx_weight' to devlink-rate

To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_weight' needs to be introduced. This attribute allows
for usage of Weighted Fair Queuing arbitration scheme among siblings.
This arbitration scheme can be used simultaneously with the strict
priority.

Introduce new attribute in devlink-rate that will allow for configuration
of Weighted Fair Queueing. New attribute is optional.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Introduce new attribute 'tx_priority' to devlink-rate

To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_priority' needs to be introduced. This attribute allows
for usage of strict priority arbiter among siblings. This arbitration
scheme attempts to schedule nodes based on their priority as long as the
nodes remain within their bandwidth limit.

Introduce new attribute in devlink-rate that will allow for configuration
of strict priority. New attribute is optional.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'autoload-dsa-tagging-driver-when-dynamically-changing-protocol'

Vladimir Oltean says:

====================
Autoload DSA tagging driver when dynamically changing protocol

This patch set solves the issue reported by Michael and Heiko here:
https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/
making full use of Michael's suggestion of having two modaliases: one
gets used for loading the tagging protocol when it's the default one
reported by the switch driver, the other gets loaded at user's request,
by name.

  # modinfo tag_ocelot
  filename:       /lib/modules/6.1.0-rc4+/kernel/net/dsa/tag_ocelot.ko
  license:        GPL v2
  alias:          dsa_tag:seville
  alias:          dsa_tag:id-21
  alias:          dsa_tag:ocelot
  alias:          dsa_tag:id-15
  depends:        dsa_core
  intree:         Y
  name:           tag_ocelot
  vermagic:       6.1.0-rc4+ SMP preempt mod_unload modversions aarch64

Tested on NXP LS1028A-RDB with the following device tree addition:

&mscc_felix_port4 {
dsa-tag-protocol = "ocelot-8021q";
};

&mscc_felix_port5 {
dsa-tag-protocol = "ocelot-8021q";
};

CONFIG_NET_DSA and everything that depends on it is built as module.
Everything auto-loads, and "cat /sys/class/net/eno2/dsa/tagging" shows
"ocelot-8021q". Traffic works as well. Furthermore, "echo ocelot-8021q"
into the aforementioned sysfs file now auto-loads the driver for it.
====================

Link: https://lore.kernel.org/r/20221115011847.2843127-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: autoload tag driver module on tagging protocol change

Issue a request_module() call when an attempt to change the tagging
protocol is made, either by sysfs or by device tree. In the case of
ocelot (the only driver for which the default and the alternative
tagging protocol are compiled as different modules), the user is now no
longer required to insert tag_ocelot_8021q.ko manually.

In the particular case of ocelot, this solves a problem where
tag_ocelot_8021q.ko is built as module, and this is present in the
device tree:

&mscc_felix_port4 {
dsa-tag-protocol = "ocelot-8021q";
};

&mscc_felix_port5 {
dsa-tag-protocol = "ocelot-8021q";
};

Because no one attempts to load the module into the kernel at boot time,
the switch driver will fail to probe (actually forever defer) until
someone manually inserts tag_ocelot_8021q.ko. This is now no longer
necessary and happens automatically.

Rename dsa_find_tagger_by_name() to denote the change in functionality:
there is now feature parity with dsa_tag_driver_get_by_id(), i.o.w. we
also load the module if it's missing.

Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: rename dsa_tag_driver_get() to dsa_tag_driver_get_by_id()

A future patch will introduce one more way of getting a reference on a
tagging protocl driver (by name). Rename the current method to "by_id".

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: strip sysfs "tagging" string of trailing newline

Currently, dsa_find_tagger_by_name() uses sysfs_streq() which works both
with strings that contain \n at the end (echo ocelot > .../dsa/tagging)
and with strings that don't (printf ocelot > .../dsa/tagging).

There will be a problem once we'll want to construct the modalias string
based on which we auto-load the protocol kernel module. If the sysfs
buffer ends in a newline, we need to strip it first. This is a
preparatory patch specifically for that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: provide a second modalias to tag proto drivers based on their name

Currently, tagging protocol drivers have a modalias of
"dsa_tag:id-<number>", where the number is one of DSA_TAG_PROTO_*_VALUE.

This modalias makes it possible for the request_module() call in
dsa_tag_driver_get() to work, given the input it has - an integer
returned by ds->ops->get_tag_protocol().

It is also possible to change tagging protocols at (pseudo-)runtime, via
sysfs or via device tree, and this works via the name string of the
tagging protocol rather than via its id (DSA_TAG_PROTO_*_VALUE).

In the latter case, there is no request_module() call, because there is
no association that the DSA core has between the string name and the ID,
to construct the modalias. The module is simply assumed to have been
inserted. This is actually slightly problematic when the tagging
protocol change should take place at probe time, since it's expected
that the dependency module should get autoloaded.

For this purpose, let's introduce a second modalias, so that the DSA
core can call request_module() by name. There is no reason to make the
modalias by name optional, so just modify the MODULE_ALIAS_DSA_TAG_DRIVER()
macro to take both the ID and the name as arguments, and generate two
modaliases behind the scenes.

Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: rename tagging protocol driver modalias

It's autumn cleanup time, and today's target are modaliases.

Michael says that for users of modinfo, "dsa_tag-20" is not the most
suggestive name, and recommends a change to "dsa_tag-id-20".

Andrew points out that other modaliases have a prefix delimited by
colons, so he recommends "dsa_tag:20" instead of "dsa_tag-20".

To satisfy both proposals, Florian recommends "dsa_tag:id-20".

The modaliases are not stable ABI, and the essential information
(protocol ID) is still conveyed in the new string, which
request_module() must be adapted to form.

Link: 20221027210830.3577793-1-vladimir.oltean@nxp.com
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Michael Walle <michael@walle.cc>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: stop exposing tag proto module helpers to the world

The DSA tagging protocol driver macros are in the public include/net/dsa.h
probably because that's also where the DSA_TAG_PROTO_*_VALUE macros are
(MODULE_ALIAS_DSA_TAG_DRIVER hinges on those macro definitions).

But there is no reason to expose these helpers to <net/dsa.h>. That
header is shared between switch drivers (drivers/net/dsa/), tagging
protocol drivers (net/dsa/tag_*.c), the DSA core (net/dsa/ sans tag_*.c),
and the rest of the world (DSA master drivers, network stack, etc).
Too much exposure.

On the other hand, net/dsa/dsa_priv.h is included only by the DSA core
and by DSA tagging protocol drivers (or IOW, "friend" modules). Also a
bit too much exposure - I've contemplated creating a new header which is
only included by tagging protocol drivers, but completely separating a
new dsa_tag_proto.h from dsa_priv.h is not immediately trivial - for
example dsa_slave_to_port() is used both from the fast path and from the
control path.

So for now, move these definitions to dsa_priv.h which at least hides
them from the world.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: ipq4019-mdio: document required clock-names

IPQ5018, IPQ6018 and IPQ8074 require clock-names to be set as driver is
requesting the clock based on it and not index, so document that and make
it required for the listed SoC-s.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114194734.3287854-4-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: ipq4019-mdio: require and validate clocks

Now that we can match the platforms requiring clocks by compatible start
using those to allow clocks per compatible and make them required.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114194734.3287854-3-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: ipq4019-mdio: add IPQ8074 compatible

Allow using IPQ8074 specific compatible along with the fallback IPQ4019
one in order to be able to specify which compatibles require clocks to
be able to validate them via schema.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114194734.3287854-2-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: ipq4019-mdio: document IPQ6018 compatible

Document IPQ6018 compatible that is already being used in the DTS along
with the fallback IPQ4019 compatible as driver itself only gets probed
on IPQ4019 and IPQ5018 compatibles.

This is also required in order to specify which platform require clock to
be defined and validate it in schema.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114194734.3287854-1-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-dsa-use-more-appropriate-net_name_-constants-for-user-ports'

Rasmus Villemoes says:

====================
net: dsa: use more appropriate NET_NAME_* constants for user ports

The intention of commit 685343fc3ba6 ("net: add name_assign_type
netdev attribute") was clearly that drivers be switched over one by
one to select appropriate NET_NAME_* constants instead of
NET_NAME_UNKNOWN. This small series attempts to do that for DSA user
ports.

This is obviously and intentionally user-visible changes, so there's a
small chance that it could lead to a regression. To make it easy to
revert either of the "label in DT" and "fallback to eth%d" changes,
this is done as a refactoring which shouldn't introduce any functional
change (but by itself adds code which looks a little odd, with the two
identical assignments in the two branches), followed by changing the
constant used in each case in two different patches.
====================

Link: https://lore.kernel.org/r/20221116105205.1127843-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: set name_assign_type to NET_NAME_ENUM for enumerated user ports

When a user port does not have a label in device tree, and we thus
fall back to the eth%d scheme, the proper constant to use is
NET_NAME_ENUM. See also commit e9f656b7a214 ("net: ethernet: set
default assignment identifier to NET_NAME_ENUM"), which in turn quoted
commit 685343fc3ba6 ("net: add name_assign_type netdev attribute"):

    ... when the kernel has given the interface a name using global
    device enumeration based on order of discovery (ethX, wlanY, etc)
    ... are labelled NET_NAME_ENUM.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.faineli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: use NET_NAME_PREDICTABLE for user ports with name given in DT

When a user port has a label in device tree, the corresponding
netdevice is, to quote include/uapi/linux/netdevice.h, "predictably
named by the kernel". This is also explicitly one of the intended use
cases for NET_NAME_PREDICTABLE, quoting 685343fc3ba6 ("net: add
name_assign_type netdev attribute"):

  NET_NAME_PREDICTABLE:
    The ifname has been assigned by the kernel in a predictable way
    [...] Examples include [...] and names deduced from hardware
    properties (including being given explicitly by the firmware).

Expose that information properly for the benefit of userspace tools
that make decisions based on the name_assign_type attribute,
e.g. a systemd-udev rule with "kernel" in NamePolicy.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.faineli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: refactor name assignment for user ports

The following two patches each have a (small) chance of causing
regressions for userspace and will in that case of course need to be
reverted.

In order to prepare for that and make those two patches independent
and individually revertable, refactor the code which sets the names
for user ports by moving the "fall back to eth%d if no label is given
in device tree" to dsa_slave_create().

No functional change (at least none intended).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.faineli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethtool: doc: clarify what drivers can implement in their get_drvinfo()

Many of the drivers which implement ethtool_ops::get_drvinfo() will
prints the .driver, .version or .bus_info of struct ethtool_drvinfo.
To have a glance of current state, do:

  $ git grep -W "get_drvinfo(struct"

Printing in those three fields is useless because:

  - since [1], the driver version should be the kernel version (at
    least for upstream drivers). Arguably, out of tree drivers might
    still want to set a custom version, but out of tree is not our
    focus.

  - since [2], the core is able to provide default values for .driver
    and .bus_info.

In summary, drivers may provide .fw_version and .erom_version, the
rest is expected to be done by the core.

In struct ethtool_ops doc from linux/ethtool: rephrase field
get_drvinfo() doc to discourage developers from implementing this
callback.

In struct ethtool_drvinfo doc from uapi/linux/ethtool.h: remove the
paragraph mentioning what drivers should do. Rationale: no need to
repeat what is already written in struct ethtool_ops doc. But add a
note that .fw_version and .erom_version are driver defined.

Also update the dummy driver and simply remove the callback in order
not to confuse the newcomers: most of the drivers will not need this
callback function any more.

[1] commit 6a7e25c7fb48 ("net/core: Replace driver version to be
    kernel version")
Link: https://git.kernel.org/torvalds/linux/c/6a7e25c7fb48
[2] commit edaf5df22cb8 ("ethtool: ethtool_get_drvinfo: populate
    drvinfo fields even if callback exits")
Link: https://git.kernel.org/netdev/net-next/c/edaf5df22cb8
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221116171828.4093-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

include/linux/bpf.h
  1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value")
  aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record")
  f71b2f64177a ("bpf: Refactor map->off_arr handling")
https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.1-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.

  Current release - regressions:

   - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init()

  Previous releases - regressions:

   - bridge: fix memory leaks when changing VLAN protocol

   - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims

   - dsa: don't leak tagger-owned storage on switch driver unbind

   - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6
     is removed

   - eth: stmmac: ensure tx function is not running in
     stmmac_xdp_release()

   - eth: hns3: fix return value check bug of rx copybreak

  Previous releases - always broken:

   - kcm: close race conditions on sk_receive_queue

   - bpf: fix alignment problem in bpf_prog_test_run_skb()

   - bpf: fix writing offset in case of fault in
     strncpy_from_kernel_nofault

   - eth: macvlan: use built-in RCU list checking

   - eth: marvell: add sleep time after enabling the loopback bit

   - eth: octeon_ep: fix potential memory leak in octep_device_setup()

  Misc:

   - tcp: configurable source port perturb table size

   - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)"

* tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: use struct_group to copy ip/ipv6 header addresses
  net: usb: smsc95xx: fix external PHY reset
  net: usb: qmi_wwan: add Telit 0x103a composition
  netdevsim: Fix memory leak of nsim_dev->fa_cookie
  tcp: configurable source port perturb table size
  l2tp: Serialize access to sk_user_data with sk_callback_lock
  net: thunderbolt: Fix error handling in tbnet_init()
  net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
  net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()
  net: dsa: don't leak tagger-owned storage on switch driver unbind
  net/x25: Fix skb leak in x25_lapb_receive_frame()
  net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
  bridge: switchdev: Fix memory leaks when changing VLAN protocol
  net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
  net: hns3: fix return value check bug of rx copybreak
  net: hns3: fix incorrect hw rss hash type of rx packet
  net: phy: marvell: add sleep time after enabling the loopback bit
  net: ena: Fix error handling in ena_init()
  kcm: close race conditions on sk_receive_queue
  net: ionic: Fix error handling in ionic_init_module()
  ...

net: ethernet: renesas: Fix return type in rswitch_etha_wait_link_verification()

The rswitch_etha_wait_link_verification() is supposed to return zero
on success or negative error codes. Unfortunately it is declared as a
bool so the caller treats everything as success.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/Y3OPo6AOL6PTvXFU@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

wifi: ath10k: Remove redundant argument offset

This argument of ath10k_htt_rx_h_frag_pn_check() is always set to 0 so
drop this.

Signed-off-by: Zhi-Jun You <hujy652@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221110164025.14418-1-hujy652@gmail.com

wifi: ath10k: Fix return value in ath10k_pci_init()

This driver is attempting to register to support two different buses.
if either of these is successful then ath10k_pci_init() should return 0
so that hardware attached to the successful bus can be probed and
supported. only if both of these are unsuccessful should ath10k_pci_init()
return an errno.

Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com