Maxime Ripard [Mon, 11 Feb 2019 14:41:24 +0000 (15:41 +0100)]
drm/sun4i: dsi: Enforce boundaries on the start delay
[ Upstream commit
efa31801203ac2f5c6a82a28cb991c7163ee0f1d ]
The Allwinner BSP makes sure that we don't end up with a null start delay
or with a delay larger than vtotal.
The former condition is likely to happen now with the reworked start delay,
so make sure we enforce the same boundaries.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Farhan Ali [Tue, 16 Apr 2019 21:23:14 +0000 (17:23 -0400)]
vfio-ccw: Prevent quiesce function going into an infinite loop
[ Upstream commit
d1ffa760d22aa1d8190478e5ef555c59a771db27 ]
The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
- wait for any interrupts
- flush all I/O in the workqueue
- retry cio_cancel_halt_clear
During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.
Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <
4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.
1555449329.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Mon, 11 Feb 2019 14:41:23 +0000 (15:41 +0100)]
drm/sun4i: dsi: Change the start delay calculation
[ Upstream commit
da676c6aa6413d59ab0a80c97bbc273025e640b2 ]
The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.
That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.
This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Wilson [Fri, 4 Aug 2017 08:23:28 +0000 (09:23 +0100)]
drm: Wake up next in drm_read() chain if we are forced to putback the event
[ Upstream commit
60b801999c48b6c1dd04e653a38e2e613664264e ]
After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.
Testcase: igt/drm_read/short-buffer-wakeup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Noralf Trønnes [Mon, 25 Feb 2019 14:42:26 +0000 (15:42 +0100)]
drm/drv: Hold ref on parent device during drm_device lifetime
[ Upstream commit
56be6503aab2bc3a30beae408071b9be5e1bae51 ]
This makes it safe to access drm_device->dev after the parent device has
been removed/unplugged.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Anholt [Fri, 8 Mar 2019 17:43:35 +0000 (09:43 -0800)]
drm/v3d: Handle errors from IRQ setup.
[ Upstream commit
fc22771547e7e8a63679f0218e943d72b107de65 ]
Noted in review by Dave Emett for V3D 4.2 support.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 7 Mar 2019 10:11:30 +0000 (11:11 +0100)]
ASoC: davinci-mcasp: Fix clang warning without CONFIG_PM
[ Upstream commit
8ca5104715cfd14254ea5aecc390ae583b707607 ]
Building with clang shows a variable that is only used by the
suspend/resume functions but defined outside of their #ifdef block:
sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted
We commonly fix these by marking the PM functions as __maybe_unused,
but here that would grow the davinci_mcasp structure, so instead
add another #ifdef here.
Fixes:
1cc0c054f380 ("ASoC: davinci-mcasp: Convert the context save/restore to use array")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Lesiak [Thu, 7 Mar 2019 20:39:00 +0000 (20:39 +0000)]
spi: Fix zero length xfer bug
[ Upstream commit
5442dcaa0d90fc376bdfc179a018931a8f43dea4 ]
This fixes a bug for messages containing both zero length and
unidirectional xfers.
The function spi_map_msg will allocate dummy tx and/or rx buffers
for use with unidirectional transfers when the hardware can only do
a bidirectional transfer. That dummy buffer will be used in place
of a NULL buffer even when the xfer length is 0.
Then in the function __spi_map_msg, if he hardware can dma,
the zero length xfer will have spi_map_buf called on the dummy
buffer.
Eventually, __sg_alloc_table is called and returns -EINVAL
because nents == 0.
This fix prevents the error by not using the dummy buffer when
the xfer length is zero.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trent Piepho [Mon, 4 Mar 2019 20:18:49 +0000 (20:18 +0000)]
spi: imx: stop buffer overflow in RX FIFO flush
[ Upstream commit
c842749ea1d32513f9e603c074d60d7aa07cb2ef ]
Commit
71abd29057cb ("spi: imx: Add support for SPI Slave mode") added
an RX FIFO flush before start of a transfer. In slave mode, the master
may have sent more data than expected and this data will still be in the
RX FIFO at the start of the next transfer, and so needs to be flushed.
However, the code to do the flush was accidentally saving this data into
the previous transfer's RX buffer, clobbering the contents of whatever
followed that buffer.
Change it to empty the FIFO and throw away the data. Every one of the
RX functions for the different eCSPI versions and modes reads the RX
FIFO data using the same readl() call, so just use that, rather than
using the spi_imx->rx function pointer and making sure all the different
rx functions have a working "throw away" mode.
There is another issue, which affects master mode when switching from
DMA to PIO. There can be extra data in the RX FIFO which triggers this
flush code, causing memory corruption in the same manner. I don't know
why this data is unexpectedly in the FIFO. It's likely there is a
different bug or erratum responsible for that. But regardless of that,
I think this is proper fix the for bug at hand here.
Fixes:
71abd29057cb ("spi: imx: Add support for SPI Slave mode")
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Tue, 12 Mar 2019 18:45:13 +0000 (19:45 +0100)]
spi: rspi: Fix sequencer reset during initialization
[ Upstream commit
26843bb128590edd7eba1ad7ce22e4b9f1066ce3 ]
While the sequencer is reset after each SPI message since commit
880c6d114fd79a69 ("spi: rspi: Add support for Quad and Dual SPI
Transfers on QSPI"), it was never reset for the first message, thus
relying on reset state or bootloader settings.
Fix this by initializing it explicitly during configuration.
Fixes:
0b2182ddac4b8837 ("spi: add support for Renesas RSPI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Thu, 7 Feb 2019 15:45:16 +0000 (07:45 -0800)]
drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
[ Upstream commit
fe4ed1b457943113ee1138c939fbdeede4af6cf3 ]
Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.
The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.
We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.
However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.
So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().
We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().
Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Wed, 13 Mar 2019 16:55:41 +0000 (11:55 -0500)]
spi : spi-topcliff-pch: Fix to handle empty DMA buffers
[ Upstream commit
f37d8e67f39e6d3eaf4cc5471e8a3d21209843c6 ]
pch_alloc_dma_buf allocated tx, rx DMA buffers which can fail. Further,
these buffers are used without a check. The patch checks for these
failures and sends the error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Tue, 12 Mar 2019 23:30:07 +0000 (16:30 -0700)]
scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices
[ Upstream commit
c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ]
During debug, it was seen that the driver is issuing commands specific to
SLI3 on SLI4 devices. Although the adapter correctly rejected the command,
this should not be done.
Revise the code to stop sending these commands on a SLI4 adapter.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 19 Feb 2019 17:01:56 +0000 (12:01 -0500)]
media: saa7146: avoid high stack usage with clang
[ Upstream commit
03aa4f191a36f33fce015387f84efa0eee94408e ]
Two saa7146/hexium files contain a construct that causes a warning
when built with clang:
drivers/media/pci/saa7146/hexium_orion.c:210:12: error: stack frame size of 2272 bytes in function 'hexium_probe'
[-Werror,-Wframe-larger-than=]
static int hexium_probe(struct saa7146_dev *dev)
^
drivers/media/pci/saa7146/hexium_gemini.c:257:12: error: stack frame size of 2304 bytes in function 'hexium_attach'
[-Werror,-Wframe-larger-than=]
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
^
This one happens regardless of KASAN, and the problem is that a
constructor to initialize a dynamically allocated structure leads
to a copy of that structure on the stack, whereas gcc initializes
it in place.
Link: https://bugs.llvm.org/show_bug.cgi?id=40776
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warnings]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Tue, 12 Mar 2019 23:30:21 +0000 (16:30 -0700)]
scsi: lpfc: Fix fc4type information for FDMI
[ Upstream commit
32a80c093b524a0682f1c6166c910387b116ffce ]
The driver is reporting support for NVME even when not configured for NVME
operation.
Fix (and make more readable) when NVME protocol support is indicated.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Tue, 12 Mar 2019 23:30:20 +0000 (16:30 -0700)]
scsi: lpfc: Fix FDMI manufacturer attribute value
[ Upstream commit
d67f935b79a76ac9d86dde1a27bdd413feb5d987 ]
The FDMI manufacturer value being reported on Linux is inconsistent with
other OS's.
Set the value to "Emulex Corporation" for consistency.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Fri, 8 Mar 2019 13:02:26 +0000 (08:02 -0500)]
media: vimc: zero the media_device on probe
[ Upstream commit
f74267b51cb36321f777807b2e04ca02167ecc08 ]
The media_device is part of a static global vimc_device struct.
The media framework expects this to be zeroed before it is
used, however, since this is a global this is not the case if
vimc is unbound and then bound again.
So call memset to ensure any left-over values are cleared.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 19 Feb 2019 17:01:58 +0000 (12:01 -0500)]
media: go7007: avoid clang frame overflow warning with KASAN
[ Upstream commit
ed713a4a1367aca5c0f2f329579465db00c17995 ]
clang-8 warns about one function here when KASAN is enabled, even
without the 'asan-stack' option:
drivers/media/usb/go7007/go7007-fw.c:1551:5: warning: stack frame size of 2656 bytes in function
I have reported this issue in the llvm bugzilla, but to make
it work with the clang-8 release, a small annotation is still
needed.
Link: https://bugs.llvm.org/show_bug.cgi?id=38809
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Tue, 26 Feb 2019 12:54:22 +0000 (07:54 -0500)]
media: gspca: do not resubmit URBs when streaming has stopped
[ Upstream commit
e6f8bd59c28f758feea403a70d6c3ef28c50959f ]
When streaming is stopped all URBs are killed, but in fill_frame and in
bulk_irq this results in an attempt to resubmit the killed URB. That is
not what you want and causes spurious kernel messages.
So check if streaming has stopped before resubmitting.
Also check against gspca_dev->streaming rather than vb2_start_streaming_called()
since vb2_start_streaming_called() will return true when in stop_streaming,
but gspca_dev->streaming is set to false when stop_streaming is called.
Fixes:
6992effe5344 ("gspca: Kill all URBs before releasing any of them")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helen Fornazier [Wed, 6 Mar 2019 22:42:38 +0000 (17:42 -0500)]
media: vimc: stream: fix thread state before sleep
[ Upstream commit
2978a505aaa981b279ef359f74ba93d25098e0a0 ]
The state TASK_UNINTERRUPTIBLE should be set just before
schedule_timeout() call, so it knows the sleep mode it should enter.
There is no point in setting TASK_UNINTERRUPTIBLE at the initialization
of the thread as schedule_timeout() will set the state back to
TASK_RUNNING.
This fixes a warning in __might_sleep() call, as it's expecting the
task to be in TASK_RUNNING state just before changing the state to
a sleeping state.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 15 Mar 2019 07:11:56 +0000 (02:11 -0500)]
scsi: ufs: fix a missing check of devm_reset_control_get
[ Upstream commit
63a06181d7ce169d09843645c50fea1901bc9f0a ]
devm_reset_control_get could fail, so the fix checks its return value and
passes the error code upstream in case it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Kazlauskas [Fri, 8 Feb 2019 18:21:05 +0000 (13:21 -0500)]
drm/amd/display: Set stream->mode_changed when connectors change
[ Upstream commit
b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ]
[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.
When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.
This incorrect programming sequence causes CRC mismatches to occur in
the test.
The stream->mode_changed value should be set whenever a new stream
is created.
[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.
So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Murton Liu [Fri, 15 Feb 2019 20:05:43 +0000 (15:05 -0500)]
drm/amd/display: Fix Divide by 0 in memory calculations
[ Upstream commit
59979bf8be1784ebfc44215031c6c88ca22ae65d ]
Check if we get any values equal to 0, and set to 1 if so.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 5 Mar 2019 13:29:48 +0000 (08:29 -0500)]
media: staging: davinci_vpfe: disallow building with COMPILE_TEST
[ Upstream commit
49dc762cffd8305a861ca649e82dc5533b3e3344 ]
The driver should really call dm365_isif_setup_pinmux() through a callback,
but uses a hack to include a davinci specific machine header file when
compile testing instead. This works almost everywhere, but not on the
ARM omap1 platform, which has another header named mach/mux.h. This
causes a build failure:
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: implicit declaration of function 'davinci_cfg_reg' [-Werror,-Wimplicit-function-declaration]
davinci_cfg_reg(DM365_VIN_CAM_WEN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:18: error: use of undeclared identifier 'DM365_VIN_CAM_WEN'
davinci_cfg_reg(DM365_VIN_CAM_WEN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2029:18: error: use of undeclared identifier 'DM365_VIN_CAM_VD'
davinci_cfg_reg(DM365_VIN_CAM_VD);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2030:18: error: use of undeclared identifier 'DM365_VIN_CAM_HD'
davinci_cfg_reg(DM365_VIN_CAM_HD);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2031:18: error: use of undeclared identifier 'DM365_VIN_YIN4_7_EN'
davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2032:18: error: use of undeclared identifier 'DM365_VIN_YIN0_3_EN'
davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
^
7 errors generated.
Exclude omap1 from compile-testing, under the assumption that all others
still work.
Fixes:
4907c73deefe ("media: staging: davinci_vpfe: allow building with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Hutchinson [Sun, 13 Jan 2019 21:13:47 +0000 (16:13 -0500)]
media: m88ds3103: serialize reset messages in m88ds3103_set_frontend
[ Upstream commit
981fbe3da20a6f35f17977453bce7dfc1664d74f ]
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323
Users are experiencing problems with the DVBSky S960/S960C USB devices
since the following commit:
9d659ae: ("locking/mutex: Add lock handoff to avoid starvation")
The device malfunctions after running for an indeterminable period of
time, and the problem can only be cleared by rebooting the machine.
It is possible to encourage the problem to surface by blocking the
signal to the LNB.
Further debugging revealed the cause of the problem.
In the following capture:
- thread #1325 is running m88ds3103_set_frontend
- thread #42 is running ts2020_stat_work
a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
[1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
Two i2c messages are sent to perform a reset in m88ds3103_set_frontend:
a. 0x07, 0x80
b. 0x07, 0x00
However, as shown in the capture, the regmap mutex is being handed over
to another thread (ts2020_stat_work) in between these two messages.
>From here, the device responds to every i2c message with an 07 message,
and will only return to normal operation following a power cycle.
Use regmap_multi_reg_write to group the two reset messages, ensuring
both are processed before the regmap mutex is unlocked.
Signed-off-by: James Hutchinson <jahutchinson99@googlemail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Brüns [Sun, 20 Jan 2019 01:30:04 +0000 (20:30 -0500)]
media: dvbsky: Avoid leaking dvb frontend
[ Upstream commit
fdfa59cd63b184e1e96d51ff170fcac739bc6f6f ]
Commit
14f4eaeddabc ("media: dvbsky: fix driver unregister logic") fixed
a use-after-free by removing the reference to the frontend after deleting
the backing i2c device.
This has the unfortunate side effect the frontend device is never freed
in the dvb core leaving a dangling device, leading to errors when the
dvb core tries to register the frontend after e.g. a replug as reported
here: https://www.spinics.net/lists/linux-media/msg138181.html
media: dvbsky: issues with DVBSky T680CI
===
[ 561.119145] sp2 8-0040: CIMaX SP2 successfully attached
[ 561.119161] usb 2-3: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[ 561.119174] sysfs: cannot create duplicate filename '/class/dvb/
dvb0.frontend0'
===
The use after free happened as dvb_usbv2_disconnect calls in this order:
- dvb_usb_device::props->exit(...)
- dvb_usbv2_adapter_frontend_exit(...)
+ if (fe) dvb_unregister_frontend(fe)
+ dvb_usb_device::props->frontend_detach(...)
Moving the release of the i2c device from exit() to frontend_detach()
avoids the dangling pointer access and allows the core to unregister
the frontend.
This was originally reported for a DVBSky T680CI, but it also affects
the MyGica T230C. As all supported devices structure the registration/
unregistration identically, apply the change for all device types.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 21 Dec 2018 04:54:03 +0000 (23:54 -0500)]
media: si2165: fix a missing check of return value
[ Upstream commit
0ab34a08812a3334350dbaf69a018ee0ab3d2ddd ]
si2165_readreg8() may fail. Looking into si2165_readreg8(), we will find
that "val_tmp" will be an uninitialized value when regmap_read() fails.
"val_tmp" is then assigned to "val". So if si2165_readreg8() fails,
"val" will be a random value. Further use will lead to undefined
behaviors. The fix checks if si2165_readreg8() fails, and if so, returns
its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Tue, 11 Dec 2018 07:59:38 +0000 (15:59 +0800)]
igb: Exclude device from suspend direct complete optimization
[ Upstream commit
5b6e13216be29ced7350d9c354a1af8fe0ad9a3e ]
igb sets different WoL settings in system suspend callback and runtime
suspend callback.
The suspend direct complete optimization leaves igb in runtime suspended
state with wrong WoL setting during system suspend.
To fix this, we need to disable suspend direct complete optimization to
let igb always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Noralf Trønnes [Fri, 22 Feb 2019 12:43:29 +0000 (13:43 +0100)]
tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfers
[ Upstream commit
a89bfc5d9a0732d84b4de311e27133daa0586316 ]
Buffers passed to spi_sync() must be dma-safe even for tiny buffers since
some SPI controllers use DMA for all transfers.
Example splat with CONFIG_DMA_API_DEBUG enabled:
[ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=
000000001e49185d]
[ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190
[ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm
[ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236
[ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190
[ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54
[ 23.750637] RSP: 0000:
ffff97bbc0292fa0 EFLAGS:
00010286
[ 23.750646] RAX:
0000000000000000 RBX:
ffff97bbc0290000 RCX:
0000000000000006
[ 23.750652] RDX:
0000000000000007 RSI:
0000000000000002 RDI:
ffff94b33e115450
[ 23.750658] RBP:
ffff94b33c8578b0 R08:
0000000000000002 R09:
00000000000201c0
[ 23.750664] R10:
00000006ecb0ccc6 R11:
0000000000034f38 R12:
000000000000316c
[ 23.750670] R13:
ffff94b33c84b250 R14:
ffff94b33dedd5a0 R15:
0000000000000001
[ 23.750679] FS:
0000000000000000(0000) GS:
ffff94b33e100000(0063) knlGS:
00000000f7faf690
[ 23.750686] CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
[ 23.750691] CR2:
00000000f7f54faf CR3:
000000000722c000 CR4:
00000000001006e0
[ 23.750696] Call Trace:
[ 23.750713] debug_dma_map_sg+0x100/0x340
[ 23.750727] ? dma_direct_map_sg+0x3b/0xb0
[ 23.750739] spi_map_buf+0x25a/0x300
[ 23.750751] __spi_pump_messages+0x2a4/0x680
[ 23.750762] __spi_sync+0x1dd/0x1f0
[ 23.750773] spi_sync+0x26/0x40
[ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi]
[ 23.750802] ? spi_finalize_current_transfer+0x10/0x10
[ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi]
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Sat, 2 Feb 2019 17:40:16 +0000 (01:40 +0800)]
e1000e: Disable runtime PM on CNP+
[ Upstream commit
459d69c407f9ba122f12216555c3012284dc9fd7 ]
There are some new e1000e devices can only be woken up from D3 one time,
by plugging Ethernet cable. Subsequent cable plugging does set PME bit
correctly, but it still doesn't get woken up.
Since e1000e connects to the root complex directly, we rely on ACPI to
wake it up. In this case, the GPE from _PRW only works once and stops
working after that. Though it appears to be a platform bug, e1000e
maintainers confirmed that I219 does not support D3.
So disable runtime PM on CNP+ chips. We may need to disable earlier
generations if this bug also hit older platforms.
Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Tue, 12 Mar 2019 08:33:28 +0000 (03:33 -0500)]
thunderbolt: property: Fix a NULL pointer dereference
[ Upstream commit
106204b56f60abf1bead7dceb88f2be3e34433da ]
In case kzalloc fails, the fix releases resources and returns
-ENOMEM to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmytro Laktyushkin [Thu, 7 Mar 2019 18:26:13 +0000 (13:26 -0500)]
drm/amd/display: fix releasing planes when exiting odm
[ Upstream commit
bc2193992b00488f5734613ac95b78ef2d2803ab ]
Releasing planes should not release the 2nd odm pipe right away,
this change leaves us with 2 pipes with null planes and same stream
when planes are released during odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Wed, 20 Mar 2019 15:57:54 +0000 (10:57 -0500)]
thunderbolt: Fix to check for kmemdup failure
[ Upstream commit
2cc12751cf464a722ff57b54d17d30c84553f9c0 ]
Memory allocated via kmemdup might fail and return a NULL pointer.
This patch adds a check on the return value of kmemdup and passes the
error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Wed, 20 Mar 2019 16:34:09 +0000 (11:34 -0500)]
thunderbolt: Fix to check return value of ida_simple_get
[ Upstream commit
9aabb68568b473bf2f0b179d053b403961e42e4d ]
In enumerate_services, ida_simple_get on failure can return an error and
leaks memory. The patch ensures that the dev_set_name is set on non
failure cases, and releases memory during failure.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rouven Czerwinski [Mon, 11 Mar 2019 10:58:57 +0000 (11:58 +0100)]
hwrng: omap - Set default quality
[ Upstream commit
62f95ae805fa9e1e84d47d3219adddd97b2654b7 ]
Newer combinations of the glibc, kernel and openssh can result in long initial
startup times on OMAP devices:
[ 6.671425] systemd-rc-once[102]: Creating ED25519 key; this may take some time ...
[ 142.652491] systemd-rc-once[102]: Creating ED25519 key; done.
due to the blocking getrandom(2) system call:
[ 142.610335] random: crng init done
Set the quality level for the omap hwrng driver allowing the kernel to use the
hwrng as an entropy source at boot.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameer Pujar [Wed, 13 Mar 2019 11:32:36 +0000 (17:02 +0530)]
dmaengine: tegra210-adma: use devm_clk_*() helpers
[ Upstream commit
f6ed6491d565c336a360471e0c29228e34f4380e ]
adma driver is using pm_clk_*() interface for managing clock resources.
With this it is observed that clocks remain ON always. This happens on
Tegra devices which use BPMP co-processor to manage clock resources,
where clocks are enabled during prepare phase. This is necessary because
clocks to BPMP are always blocking. When pm_clk_*() interface is used on
such Tegra devices, clock prepare count is not balanced till remove call
happens for the driver and hence clocks are seen ON always. Thus this
patch replaces pm_clk_*() with devm_clk_*() framework.
Suggested-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Lüssing [Thu, 14 Feb 2019 15:52:43 +0000 (16:52 +0100)]
batman-adv: allow updating DAT entry timeouts on incoming ARP Replies
[ Upstream commit
099e6cc1582dc2903fecb898bbeae8f7cf4262c7 ]
Currently incoming ARP Replies, for example via a DHT-PUT message, do
not update the timeout for an already existing DAT entry. These ARP
Replies are dropped instead.
This however defeats the purpose of the DHCPACK snooping, for instance.
Right now, a DAT entry in the DHT will be purged every five minutes,
likely leading to a mesh-wide ARP Request broadcast after this timeout.
Which then recreates the entry. The idea of the DHCPACK snooping is to
be able to update an entry before a timeout happens, to avoid ARP Request
flooding.
This patch fixes this issue by updating a DAT entry on incoming
ARP Replies even if a matching DAT entry already exists. While still
filtering the ARP Reply towards the soft-interface, to avoid duplicate
messages on the client device side.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 25 Mar 2019 14:23:11 +0000 (15:23 +0100)]
selinux: avoid uninitialized variable warning
[ Upstream commit
98bbbb76f2edcfb8fb2b8f4b3ccc7b6e99d64bd8 ]
clang correctly points out a code path that would lead
to an uninitialized variable use:
security/selinux/netlabel.c:310:6: error: variable 'addr' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (ip_hdr(skb)->version == 4) {
^~~~~~~~~~~~~~~~~~~~~~~~~
security/selinux/netlabel.c:322:40: note: uninitialized use occurs here
rc = netlbl_conn_setattr(ep->base.sk, addr, &secattr);
^~~~
security/selinux/netlabel.c:310:2: note: remove the 'if' if its condition is always true
if (ip_hdr(skb)->version == 4) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
security/selinux/netlabel.c:291:23: note: initialize the variable 'addr' to silence this warning
struct sockaddr *addr;
^
= NULL
This is probably harmless since we should not see ipv6 packets
of CONFIG_IPV6 is disabled, but it's better to rearrange the code
so this cannot happen.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[PM: removed old patchwork link, fixed checkpatch.pl style errors]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 22 Mar 2019 14:25:49 +0000 (15:25 +0100)]
scsi: lpfc: avoid uninitialized variable warning
[ Upstream commit
faf5a744f4f8d76e7c03912b5cd381ac8045f6ec ]
clang -Wuninitialized incorrectly sees a variable being used without
initialization:
drivers/scsi/lpfc/lpfc_nvme.c:2102:37: error: variable 'localport' is uninitialized when used here
[-Werror,-Wuninitialized]
lport = (struct lpfc_nvme_lport *)localport->private;
^~~~~~~~~
drivers/scsi/lpfc/lpfc_nvme.c:2059:38: note: initialize the variable 'localport' to silence this warning
struct nvme_fc_local_port *localport;
^
= NULL
1 error generated.
This is clearly in dead code, as the condition leading up to it is always
false when CONFIG_NVME_FC is disabled, and the variable is always
initialized when nvme_fc_register_localport() got called successfully.
Change the preprocessor conditional to the equivalent C construct, which
makes the code more readable and gets rid of the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 22 Mar 2019 14:25:03 +0000 (15:25 +0100)]
scsi: qla4xxx: avoid freeing unallocated dma memory
[ Upstream commit
608f729c31d4caf52216ea00d20092a80959256d ]
Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA
memory in get_fw_boot_info() but attempt to free it anyway:
drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (!(val & 0x07)) {
^~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here
dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
^~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true
if (!(val & 0x07)) {
^~~~~~~~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning
dma_addr_t buf_dma;
^
= 0
Skip the call to dma_free_coherent() here.
Fixes:
2a991c215978 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Fri, 22 Mar 2019 21:54:05 +0000 (14:54 -0700)]
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
[ Upstream commit
8ead7e817224d7832fe51a19783cb8fcadc79467 ]
If ohci-platform is runtime suspended, we can currently get an "imprecise
external abort" on reboot with ohci-platform loaded when PM runtime
is implemented for the SoC.
Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul E. McKenney [Thu, 21 Mar 2019 17:26:41 +0000 (10:26 -0700)]
rcuperf: Fix cleanup path for invalid perf_type strings
[ Upstream commit
ad092c027713a68a34168942a5ef422e42e039f4 ]
If the specified rcuperf.perf_type is not in the rcu_perf_init()
function's perf_ops[] array, rcuperf prints some console messages and
then invokes rcu_perf_cleanup() to set state so that a future torture
test can run. However, rcu_perf_cleanup() also attempts to end the
test that didn't actually start, and in doing so relies on the value
of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case and
inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding
relying on an irrelevant cur_ops value.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yazen Ghannam [Fri, 27 Jul 2018 21:40:09 +0000 (16:40 -0500)]
x86/mce: Handle varying MCA bank counts
[ Upstream commit
006c077041dc73b9490fffc4c6af5befe0687110 ]
Linux reads MCG_CAP[Count] to find the number of MCA banks visible to a
CPU. Currently, this number is the same for all CPUs and a warning is
shown if there is a difference. The number of banks is overwritten with
the MCG_CAP[Count] value of each following CPU that boots.
According to the Intel SDM and AMD APM, the MCG_CAP[Count] value gives
the number of banks that are available to a "processor implementation".
The AMD BKDGs/PPRs further clarify that this value is per core. This
value has historically been the same for every core in the system, but
that is not an architectural requirement.
Future AMD systems may have different MCG_CAP[Count] values per core,
so the assumption that all CPUs will have the same MCG_CAP[Count] value
will no longer be valid.
Also, the first CPU to boot will allocate the struct mce_banks[] array
using the number of banks based on its MCG_CAP[Count] value. The machine
check handler and other functions use the global number of banks to
iterate and index into the mce_banks[] array. So it's possible to use an
out-of-bounds index on an asymmetric system where a following CPU sees a
MCG_CAP[Count] value greater than its predecessors.
Thus, allocate the mce_banks[] array to the maximum number of banks.
This will avoid the potential out-of-bounds index since the value of
mca_cfg.banks is capped to MAX_NR_BANKS.
Set the value of mca_cfg.banks equal to the max of the previous value
and the value for the current CPU. This way mca_cfg.banks will always
represent the max number of banks detected on any CPU in the system.
This will ensure that all CPUs will access all the banks that are
visible to them. A CPU that can access fewer than the max number of
banks will find the registers of the extra banks to be read-as-zero.
Furthermore, print the resulting number of MCA banks in use. Do this in
mcheck_late_init() so that the final value is printed after all CPUs
have been initialized.
Finally, get bank count from target CPU when doing injection with mce-inject
module.
[ bp: Remove out-of-bounds example, passify and cleanup commit message. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20180727214009.78289-1-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul E. McKenney [Thu, 21 Mar 2019 16:27:28 +0000 (09:27 -0700)]
rcutorture: Fix cleanup path for invalid torture_type strings
[ Upstream commit
b813afae7ab6a5e91b4e16cc567331d9c2ae1f04 ]
If the specified rcutorture.torture_type is not in the rcu_torture_init()
function's torture_ops[] array, rcutorture prints some console messages
and then invokes rcu_torture_cleanup() to set state so that a future
torture test can run. However, rcu_torture_cleanup() also attempts to
end the test that didn't actually start, and in doing so relies on the
value of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case
and inserts a check near the beginning of rcu_torture_cleanup(),
thus avoiding relying on an irrelevant cur_ops value.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Luck [Tue, 12 Mar 2019 17:09:38 +0000 (10:09 -0700)]
x86/mce: Fix machine_check_poll() tests for error types
[ Upstream commit
f19501aa07f18268ab14f458b51c1c6b7f72a134 ]
There has been a lurking "TBD" in the machine check poll routine ever
since it was first split out from the machine check handler. The
potential issue is that the poll routine may have just begun a read from
the STATUS register in a machine check bank when the hardware logs an
error in that bank and signals a machine check.
That race used to be pretty small back when machine checks were
broadcast, but the addition of local machine check means that the poll
code could continue running and clear the error from the bank before the
local machine check handler on another CPU gets around to reading it.
Fix the code to be sure to only process errors that need to be processed
in the poll code, leaving other logged errors alone for the machine
check handler to find and process.
[ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ]
Fixes:
b79109c3bbcf ("x86, mce: separate correct machine check poller and fatal exception handler")
Fixes:
ed7290d0ee8f ("x86, mce: implement new status bits")
Reported-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20190312170938.GA23035@agluck-desk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Sun, 17 Mar 2019 10:11:14 +0000 (12:11 +0200)]
overflow: Fix -Wtype-limits compilation warnings
[ Upstream commit
dc7fe518b0493faa0af0568d6d8c2a33c00f58d0 ]
Attempt to use check_shl_overflow() with inputs of unsigned type
produces the following compilation warnings.
drivers/infiniband/hw/mlx5/qp.c: In function _set_user_rq_size_:
./include/linux/overflow.h:230:6: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
_s >= 0 && _s < 8 * sizeof(*d) ? _s : 0; \
^~
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,
&rwq->buf_size))
^~~~~~~~~~~~~~~~~~
./include/linux/overflow.h:232:26: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(_to_shift != _s || *_d < 0 || _a < 0 || \
^
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size))
^~~~~~~~~~~~~~~~~~
./include/linux/overflow.h:232:36: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(_to_shift != _s || *_d < 0 || _a < 0 || \
^
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,&rwq->buf_size))
^~~~~~~~~~~~~~~~~~
Fixes:
0c66847793d1 ("overflow.h: Add arithmetic shift helper")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 15 Mar 2019 07:07:12 +0000 (02:07 -0500)]
tty: ipwireless: fix missing checks for ioremap
[ Upstream commit
1bbb1c318cd8a3a39e8c3e2e83d5e90542d6c3e3 ]
ipw->attr_memory and ipw->common_memory are assigned with the
return value of ioremap. ioremap may fail, but no checks
are enforced. The fix inserts the checks to avoid potential
NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pankaj Gupta [Tue, 19 Mar 2019 06:04:06 +0000 (11:34 +0530)]
virtio_console: initialize vtermno value for ports
[ Upstream commit
4b0a2c5ff7215206ea6135a405f17c5f6fca7d00 ]
For regular serial ports we do not initialize value of vtermno
variable. A garbage value is assigned for non console ports.
The value can be observed as a random integer with [1].
[1] vim /sys/kernel/debug/virtio-ports/vport*p*
This patch initialize the value of vtermno for console serial
ports to '1' and regular serial ports are initiaized to '0'.
Reported-by: siliu@redhat.com
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chad Dupuis [Tue, 26 Mar 2019 07:38:35 +0000 (00:38 -0700)]
scsi: qedf: Add missing return in qedf_post_io_req() in the fcport offload check
[ Upstream commit
c5e06ba2f76809ad1492fdad312e81335df46bc5 ]
Fixes the following crash as the return was missing from the check if an
fcport is offloaded. If we hit this code we continue to try to post an
invalid task which can lead to the crash:
[30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet.
[30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020.
[30259.623769] BUG: unable to handle kernel NULL pointer dereference at
0000000000000198
[30259.631645] IP: [<
ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.638816] PGD 0
[30259.640841] Oops: 0000 [#1] SMP
[30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me
[30259.715529] mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G W OE ------------ 3.10.0-862.el7.x86_64 #1
[30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018
[30259.775000] task:
ffff8c801efd0000 ti:
ffff8c801efd8000 task.ti:
ffff8c801efd8000
[30259.782505] RIP: 0010:[<
ffffffffc035b1ed>] [<
ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.792116] RSP: 0018:
ffff8c801efdbbb0 EFLAGS:
00010046
[30259.797444] RAX:
0000000000000000 RBX:
ffffa7f1450948d8 RCX:
ffff8c7fe5bc40c8
[30259.804600] RDX:
ffff8c800715b300 RSI:
ffffa7f1450948d8 RDI:
ffff8c80169c2480
[30259.811755] RBP:
ffff8c801efdbc30 R08:
00000000000000ae R09:
ffff8c800a314540
[30259.818911] R10:
ffff8c7fe5bc40c8 R11:
ffff8c801efdb8ae R12:
0000000000000000
[30259.826068] R13:
ffff8c800715b300 R14:
ffff8c80169c2480 R15:
ffff8c8005da28e0
[30259.833223] FS:
0000000000000000(0000) GS:
ffff8c803f840000(0000) knlGS:
0000000000000000
[30259.841338] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[30259.847100] CR2:
0000000000000198 CR3:
000000081242e000 CR4:
00000000007607e0
[30259.854256] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[30259.861412] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[30259.868568] PKRU:
00000000
[30259.871278] Call Trace:
[30259.873737] [<
ffffffffc035c948>] qedf_post_io_req+0x148/0x680 [qedf]
[30259.880201] [<
ffffffffc035d070>] qedf_queuecommand+0x1f0/0x240 [qedf]
[30259.886749] [<
ffffffffa329b050>] scsi_dispatch_cmd+0xb0/0x240
[30259.892600] [<
ffffffffa32a45bc>] scsi_request_fn+0x4cc/0x680
[30259.898364] [<
ffffffffa3118ad9>] __blk_run_queue+0x39/0x50
[30259.903954] [<
ffffffffa3114393>] __elv_add_request+0xd3/0x260
[30259.909805] [<
ffffffffa311baf0>] blk_insert_cloned_request+0xf0/0x1b0
[30259.916358] [<
ffffffffc010b622>] map_request+0x142/0x220 [dm_mod]
[30259.922560] [<
ffffffffc010b716>] map_tio_request+0x16/0x40 [dm_mod]
[30259.928932] [<
ffffffffa2ebb1f5>] kthread_worker_fn+0x85/0x180
[30259.934782] [<
ffffffffa2ebb170>] ? kthread_stop+0xf0/0xf0
[30259.940284] [<
ffffffffa2ebae31>] kthread+0xd1/0xe0
[30259.945176] [<
ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40
[30259.951290] [<
ffffffffa351f61d>] ret_from_fork_nospec_begin+0x7/0x21
[30259.957750] [<
ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40
[30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b
[30259.983372] RIP [<
ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.990630] RSP <
ffff8c801efdbbb0>
[30259.994127] CR2:
0000000000000198
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Gleixner [Sat, 23 Mar 2019 10:36:19 +0000 (11:36 +0100)]
timekeeping: Force upper bound for setting CLOCK_REALTIME
[ Upstream commit
7a8e61f8478639072d402a26789055a4a4de8f77 ]
Several people reported testing failures after setting CLOCK_REALTIME close
to the limits of the kernel internal representation in nanoseconds,
i.e. year 2262.
The failures are exposed in subsequent operations, i.e. when arming timers
or when the advancing CLOCK_MONOTONIC makes the calculation of
CLOCK_REALTIME overflow into negative space.
Now people start to paper over the underlying problem by clamping
calculations to the valid range, but that's just wrong because such
workarounds will prevent detection of real issues as well.
It is reasonable to force an upper bound for the various methods of setting
CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum
uptime of 30 years which is plenty enough even for esoteric embedded
systems. That results in an upper bound of year 2232 for setting the time.
Once that limit is reached in reality this limit is only a small part of
the problem space. But until then this stops people from trying to paper
over the problem at the wrong places.
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reported-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Mon, 25 Mar 2019 21:25:22 +0000 (16:25 -0500)]
thunderbolt: Fix to check the return value of kmemdup
[ Upstream commit
fd21b79e541e4666c938a344f3ad2df74b4f5120 ]
uuid in add_switch is allocted via kmemdup which can fail. The patch
logs the error and cleans up the allocated memory for switch.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Mon, 25 Mar 2019 20:23:08 +0000 (15:23 -0500)]
thunderbolt: property: Fix a missing check of kzalloc
[ Upstream commit
6183d5a51866f3acdeeb66b75e87d44025b01a55 ]
No check is enforced for the return value of kzalloc,
which may lead to NULL-pointer dereference.
The patch fixes this issue.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Thu, 28 Mar 2019 19:34:26 +0000 (20:34 +0100)]
efifb: Omit memory map check on legacy boot
[ Upstream commit
c2999c281ea2d2ebbdfce96cecc7b52e2ae7c406 ]
Since the following commit:
38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
efifb_probe() checks its memory range via efi_mem_desc_lookup(),
and this leads to a spurious error message:
EFI_MEMMAP is not enabled
at every boot on KVM. This is quite annoying since the error message
appears even if you set "quiet" boot option.
Since this happens on legacy boot, which strangely enough exposes
a EFI framebuffer via screen_info, let's double check that we are
doing an EFI boot before attempting to access the EFI memory map.
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Thu, 28 Feb 2019 15:28:34 +0000 (10:28 -0500)]
media: gspca: Kill URBs on USB device disconnect
[ Upstream commit
9b9ea7c2b57a0c9c3341fc6db039d1f7971a432e ]
In order to prevent ISOC URBs from being infinitely resubmitted,
the driver's USB disconnect handler must kill all the in-flight URBs.
While here, change the URB packet status message to a debug level,
to avoid spamming the console too much.
This commit fixes a lockup caused by an interrupt storm coming
from the URB completion handler.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 26 Mar 2019 05:12:07 +0000 (01:12 -0400)]
media: wl128x: prevent two potential buffer overflows
[ Upstream commit
9c2ccc324b3a6cbc865ab8b3e1a09e93d3c8ade9 ]
Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen"
can copy up to 255 bytes and we only have room for two bytes. Even
if this comes from the firmware and we trust it, the new policy
generally is just to fix it as kernel hardenning.
I can't test this code so I tried to be very conservative. I considered
not allowing "evt_hdr->dlen == 1" because it doesn't initialize the
whole variable but in the end I decided to allow it and manually
initialized "asic_id" and "asic_ver" to zero.
Fixes:
e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Sat, 9 Mar 2019 07:20:56 +0000 (02:20 -0500)]
media: video-mux: fix null pointer dereferences
[ Upstream commit
aeb0d0f581e2079868e64a2e5ee346d340376eae ]
devm_kcalloc may fail and return a null pointer. The fix returns
-ENOMEM upon failures to avoid null pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tetsuo Handa [Sun, 17 Mar 2019 05:02:31 +0000 (14:02 +0900)]
kobject: Don't trigger kobject_uevent(KOBJ_REMOVE) twice.
[ Upstream commit
c03a0fd0b609e2f5c669c2b7f27c8e1928e9196e ]
syzbot is hitting use-after-free bug in uinput module [1]. This is because
kobject_uevent(KOBJ_REMOVE) is called again due to commit
0f4dafc0563c6c49
("Kobject: auto-cleanup on final unref") after memory allocation fault
injection made kobject_uevent(KOBJ_REMOVE) from device_del() from
input_unregister_device() fail, while uinput_destroy_device() is expecting
that kobject_uevent(KOBJ_REMOVE) is not called after device_del() from
input_unregister_device() completed.
That commit intended to catch cases where nobody even attempted to send
"remove" uevents. But there is no guarantee that an event will ultimately
be sent. We are at the point of no return as far as the rest of the kernel
is concerned; there are no repeats or do-overs.
Also, it is not clear whether some subsystem depends on that commit.
If no subsystem depends on that commit, it will be better to remove
the state_{add,remove}_uevent_sent logic. But we don't want to risk
a regression (in a patch which will be backported) by trying to remove
that logic. Therefore, as a first step, let's avoid the use-after-free bug
by making sure that kobject_uevent(KOBJ_REMOVE) won't be triggered twice.
[1] https://syzkaller.appspot.com/bug?id=
8b17c134fe938bbddd75a45afaa9e68af43a362d
Reported-by: syzbot <syzbot+f648cfb7e0b52bf7ae32@syzkaller.appspotmail.com>
Analyzed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes:
0f4dafc0563c6c49 ("Kobject: auto-cleanup on final unref")
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sowjanya Komatineni [Wed, 27 Mar 2019 05:56:32 +0000 (22:56 -0700)]
spi: tegra114: reset controller on probe
[ Upstream commit
019194933339b3e9b486639c8cb3692020844d65 ]
Fixes: SPI driver can be built as module so perform SPI controller reset
on probe to make sure it is in valid state before initiating transfer.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Fri, 22 Mar 2019 07:41:40 +0000 (08:41 +0100)]
HID: logitech-hidpp: change low battery level threshold from 31 to 30 percent
[ Upstream commit
1f87b0cd32b3456d7efdfb017fcf74d0bfe3ec29 ]
According to hidpp20_batterylevel_get_battery_info my Logitech K270
keyboard reports only 2 battery levels. This matches with what I've seen
after testing with batteries at varying level of fullness, it always
reports either 5% or 30%.
Windows reports "battery good" for the 30% level. I've captured an USB
trace of Windows reading the battery and it is getting the same info
as the Linux hidpp code gets.
Now that Linux handles these devices as hidpp devices, it reports the
battery as being low as it treats anything under 31% as low, this leads
to the user constantly getting a "Keyboard battery is low" warning from
GNOME3, which is very annoying.
This commit fixes this by changing the low threshold to anything under
30%, which I assume is what Windows does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Fri, 29 Mar 2019 15:27:26 +0000 (10:27 -0500)]
cxgb3/l2t: Fix undefined behaviour
[ Upstream commit
76497732932f15e7323dc805e8ea8dc11bb587cf ]
The use of zero-sized array causes undefined behaviour when it is not
the last member in a structure. As it happens to be in this case.
Also, the current code makes use of a language extension to the C90
standard, but the preferred mechanism to declare variable-length
types such as this one is a flexible array member, introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last. Which is beneficial
to cultivate a high-quality code.
Fixes:
e48f129c2f20 ("[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Tue, 26 Feb 2019 08:17:50 +0000 (16:17 +0800)]
ASoC: fsl_utils: fix a leaked reference by adding missing of_node_put
[ Upstream commit
c705247136a523488eac806bd357c3e5d79a7acd ]
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/fsl_utils.c:74:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Tue, 26 Feb 2019 08:17:51 +0000 (16:17 +0800)]
ASoC: eukrea-tlv320: fix a leaked reference by adding missing of_node_put
[ Upstream commit
b820d52e7eed7b30b2dfef5f4213a2bc3cbea6f3 ]
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/eukrea-tlv320.c:121:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function.
./sound/soc/fsl/eukrea-tlv320.c:127:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Saenz Julienne [Wed, 27 Mar 2019 10:18:48 +0000 (11:18 +0100)]
HID: core: move Usage Page concatenation to Main item
[ Upstream commit
58e75155009cc800005629955d3482f36a1e0eec ]
As seen on some USB wireless keyboards manufactured by Primax, the HID
parser was using some assumptions that are not always true. In this case
it's s the fact that, inside the scope of a main item, an Usage Page
will always precede an Usage.
The spec is not pretty clear as 6.2.2.7 states "Any usage that follows
is interpreted as a Usage ID and concatenated with the Usage Page".
While 6.2.2.8 states "When the parser encounters a main item it
concatenates the last declared Usage Page with a Usage to form a
complete usage value." Being somewhat contradictory it was decided to
match Window's implementation, which follows 6.2.2.8.
In summary, the patch moves the Usage Page concatenation from the local
item parsing function to the main item parsing function.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Terry Junge <terry.junge@poly.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 11 Feb 2019 12:58:43 +0000 (13:58 +0100)]
sh: sh7786: Add explicit I/O cast to sh7786_mm_sel()
[ Upstream commit
8440bb9b944c02222c7a840d406141ed42e945cd ]
When compile-testing on arm:
arch/sh/include/cpu-sh4/cpu/sh7786.h: In function ‘sh7786_mm_sel’:
arch/sh/include/cpu-sh4/cpu/sh7786.h:135:21: warning: passing argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [-Wint-conversion]
return __raw_readl(0xFC400020) & 0x7;
^~~~~~~~~~
In file included from include/linux/io.h:25:0,
from arch/sh/include/cpu-sh4/cpu/sh7786.h:14,
from drivers/pinctrl/sh-pfc/pfc-sh7786.c:15:
arch/arm/include/asm/io.h:113:21: note: expected ‘const volatile void *’ but argument is of type ‘unsigned int’
#define __raw_readl __raw_readl
^
arch/arm/include/asm/io.h:114:19: note: in expansion of macro ‘__raw_readl’
static inline u32 __raw_readl(const volatile void __iomem *addr)
^~~~~~~~~~~
__raw_readl() on SuperH is a macro that casts the passed I/O address to
the correct type, while the implementations on most other architectures
expect to be passed the correct pointer type.
Add an explicit cast to fix this.
Note that this also gets rid of a sparse warning on SuperH:
arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: warning: incorrect type in argument 1 (different base types)
arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: expected void const volatile [noderef] <asn:2>*<noident>
arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: got unsigned int
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Tue, 19 Mar 2019 09:10:08 +0000 (11:10 +0200)]
RDMA/hns: Fix bad endianess of port_pd variable
[ Upstream commit
6734b2973565e36659e97e12ab0d0faf1d9f3fbe ]
port_pd is treated as le32 in declaration and read, fix assignment to be
in le32 too. This change fixes the following compilation warnings.
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type
in assignment (different base types)
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype]
Fixes:
9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Lijun Ou <ouliun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengguang Xu [Fri, 15 Feb 2019 12:27:11 +0000 (20:27 +0800)]
chardev: add additional check for minor range overlap
[ Upstream commit
de36e16d1557a0b6eb328bc3516359a12ba5c25c ]
Current overlap checking cannot correctly handle
a case which is baseminor < existing baseminor &&
baseminor + minorct > existing baseminor + minorct.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Wed, 3 Apr 2019 07:39:45 +0000 (09:39 +0200)]
x86/uaccess: Fix up the fixup
[ Upstream commit
b69656fa7ea2f75e47d7bd5b9430359fa46488af ]
New tooling got confused about this:
arch/x86/lib/memcpy_64.o: warning: objtool: .fixup+0x7: return with UACCESS enabled
While the code isn't wrong, it is tedious (if at all possible) to
figure out what function a particular chunk of .fixup belongs to.
This then confuses the objtool uaccess validation. Instead of
returning directly from the .fixup, jump back into the right function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Mon, 25 Feb 2019 11:56:35 +0000 (12:56 +0100)]
x86/ia32: Fix ia32_restore_sigcontext() AC leak
[ Upstream commit
67a0514afdbb8b2fc70b771b8c77661a9cb9d3a9 ]
Objtool spotted that we call native_load_gs_index() with AC set.
Re-arrange the code to avoid that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Wed, 3 Apr 2019 07:39:48 +0000 (09:39 +0200)]
x86/uaccess, signal: Fix AC=1 bloat
[ Upstream commit
88e4718275c1bddca6f61f300688b4553dc8584b ]
Occasionally GCC is less agressive with inlining and the following is
observed:
arch/x86/kernel/signal.o: warning: objtool: restore_sigcontext()+0x3cc: call to force_valid_ss.isra.5() with UACCESS enabled
arch/x86/kernel/signal.o: warning: objtool: do_signal()+0x384: call to frame_uc_flags.isra.0() with UACCESS enabled
Cure this by moving this code out of the AC=1 region, since it really
isn't needed for the user access.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 7 Mar 2019 10:09:13 +0000 (11:09 +0100)]
x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP
[ Upstream commit
4a6c91fbdef846ec7250b82f2eeeb87ac5f18cf9 ]
For CONFIG_TRACE_BRANCH_PROFILING=y the likely/unlikely things get
overloaded and generate callouts to this code, and thus also when
AC=1.
Make it safe.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lior David [Thu, 28 Feb 2019 09:35:01 +0000 (11:35 +0200)]
wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext
[ Upstream commit
49122ec42634f73babb1dc96f170023e5228d080 ]
The functions that send management TX frame have 3 possible
results: success and other side acknowledged receive (ACK=1),
success and other side did not acknowledge receive(ACK=0) and
failure to send the frame. The current implementation
incorrectly reports the ACK=0 case as failure.
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Tue, 5 Mar 2019 11:34:05 +0000 (19:34 +0800)]
arm64: cpu_ops: fix a leaked reference by adding missing of_node_put
[ Upstream commit
92606ec9285fb84cd9b5943df23f07d741384bfc ]
The call to of_get_next_child returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./arch/arm64/kernel/cpu_ops.c:102:1-7: ERROR: missing of_node_put;
acquired a node pointer with refcount incremented on line 69, but
without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yannick Fertré [Thu, 21 Mar 2019 08:04:05 +0000 (09:04 +0100)]
drm/panel: otm8009a: Add delay at the end of initialization
[ Upstream commit
0084c3c71126fc878c6dab8a6ab8ecc484c2be02 ]
At the end of initialization, a delay is required by the panel. Without
this delay, the panel could received a frame early & generate a crash of
panel (black screen).
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanley Chu [Thu, 28 Mar 2019 09:16:24 +0000 (17:16 +0800)]
scsi: ufs: Avoid configuring regulator with undefined voltage range
[ Upstream commit
3b141e8cfd54ba3e5c610717295b2a02aab26a05 ]
For regulators used by UFS, vcc, vccq and vccq2 will have voltage range
initialized by ufshcd_populate_vreg(), however other regulators may have
undefined voltage range if dt-bindings have no such definition.
In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg
struct will be zero values and these values will be configured on
regulators in different power modes.
Currently this may have no harm if both "min_uV" and "max_uV" always keep
"zero values" because regulator_set_voltage() will always bypass such
invalid values and return "good" results.
However improper values shall be fixed to avoid potential bugs. Simply
bypass voltage configuration if voltage range is not defined.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanley Chu [Thu, 28 Mar 2019 09:16:25 +0000 (17:16 +0800)]
scsi: ufs: Fix regulator load and icc-level configuration
[ Upstream commit
0487fff76632ec023d394a05b82e87a971db8c03 ]
Currently if a regulator has "<name>-fixed-regulator" property in device
tree, it will skip current limit initialization. This lead to a zero
"max_uA" value in struct ufs_vreg.
However, "regulator_set_load" operation shall be required on regulators
which have valid current limits, otherwise a zero "max_uA" set by
"regulator_set_load" may cause unexpected behavior when this regulator is
enabled or set as high power mode.
Similarly, in device's icc_level configuration flow, the target icc_level
shall be updated if regulator also has valid current limit, otherwise a
wrong icc_level will be calculated by zero "max_uA" and thus causes
unexpected results after it is written to device.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ping-Ke Shih [Tue, 12 Mar 2019 09:06:48 +0000 (17:06 +0800)]
rtlwifi: fix potential NULL pointer dereference
[ Upstream commit
60209d482b97743915883d293c8b85226d230c19 ]
In case dev_alloc_skb fails, the fix safely returns to avoid
potential NULL pointer dereference.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Belloni [Wed, 20 Mar 2019 12:32:27 +0000 (13:32 +0100)]
rtc: xgene: fix possible race condition
[ Upstream commit
a652e00ee1233e251a337c28e18a1da59224e5ce ]
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
struct before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Piotr Figiel [Wed, 13 Mar 2019 09:52:01 +0000 (09:52 +0000)]
brcmfmac: fix Oops when bringing up interface during USB disconnect
[ Upstream commit
24d413a31afaee9bbbf79226052c386b01780ce2 ]
Fix a race which leads to an Oops with NULL pointer dereference. The
dereference is in brcmf_config_dongle() when cfg_to_ndev() attempts to get
net_device structure of interface with index 0 via if2bss mapping. This
shouldn't fail because of check for bus being ready in brcmf_netdev_open(),
but it's not synchronised with USB disconnect and there is a race: after
the check the bus can be marked down and the mapping for interface 0 may be
gone.
Solve this by modifying disconnect handling so that the removal of mapping
of ifidx to brcmf_if structure happens after netdev removal (which is
synchronous with brcmf_netdev_open() thanks to rtln being locked in
devinet_ioctl()). This assures brcmf_netdev_open() returns before the
mapping is removed during disconnect.
Unable to handle kernel NULL pointer dereference at virtual address
00000008
pgd =
bcae2612
[
00000008] *pgd=
8be73831
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: brcmfmac brcmutil nf_log_ipv4 nf_log_common xt_LOG xt_limit
iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis
u_ether usb_serial_simple usbserial cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc
usbmisc_imx ulpi 8250_exar 8250_pci 8250 8250_base libcomposite configfs
udc_core [last unloaded: brcmutil]
CPU: 2 PID: 24478 Comm: ifconfig Not tainted 4.19.23-00078-ga62866d-dirty #115
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
PC is at brcmf_cfg80211_up+0x94/0x29c [brcmfmac]
LR is at brcmf_cfg80211_up+0x8c/0x29c [brcmfmac]
pc : [<
7f26a91c>] lr : [<
7f26a914>] psr:
a0070013
sp :
eca99d28 ip :
00000000 fp :
ee9c6c00
r10:
00000036 r9 :
00000000 r8 :
ece4002c
r7 :
edb5b800 r6 :
00000000 r5 :
80f08448 r4 :
edb5b968
r3 :
ffffffff r2 :
00000000 r1 :
00000002 r0 :
00000000
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5387d Table:
7ca0c04a DAC:
00000051
Process ifconfig (pid: 24478, stack limit = 0xd9e85a0e)
Stack: (0xeca99d28 to 0xeca9a000)
9d20:
00000000 80f873b0 0000000d 80f08448 eca99d68 50d45f32
9d40:
7f27de94 ece40000 80f08448 80f08448 7f27de94 ece4002c 00000000 00000036
9d60:
ee9c6c00 7f27262c 00001002 50d45f32 ece40000 00000000 80f08448 80772008
9d80:
00000001 00001043 00001002 ece40000 00000000 50d45f32 ece40000 00000001
9da0:
80f08448 00001043 00001002 807723d0 00000000 50d45f32 80f08448 eca99e58
9dc0:
80f87113 50d45f32 80f08448 ece40000 ece40138 00001002 80f08448 00000000
9de0:
00000000 80772434 edbd5380 eca99e58 edbd5380 80f08448 ee9c6c0c 80805f70
9e00:
00000000 ede08e00 00008914 ece40000 00000014 ee9c6c0c 600c0013 00001043
9e20:
0208a8c0 ffffffff 00000000 50d45f32 eca98000 80f08448 7ee9fc38 00008914
9e40:
80f68e40 00000051 eca98000 00000036 00000003 80808b9c 6e616c77 00000030
9e60:
00000000 00000000 00001043 0208a8c0 ffffffff 00000000 80f08448 00000000
9e80:
00000000 816d8b20 600c0013 00000001 ede09320 801763d4 00000000 50d45f32
9ea0:
eca98000 80f08448 7ee9fc38 50d45f32 00008914 80f08448 7ee9fc38 80f68e40
9ec0:
ed531540 8074721c 00000800 00000001 00000000 6e616c77 00000030 00000000
9ee0:
00000000 00001002 0208a8c0 ffffffff 00000000 50d45f32 80f08448 7ee9fc38
9f00:
ed531560 ec8fc900 80285a6c 80285138 edb910c0 00000000 ecd91008 ede08e00
9f20:
80f08448 00000000 00000000 816d8b20 600c0013 00000001 ede09320 801763d4
9f40:
00000000 50d45f32 00021000 edb91118 edb910c0 80f08448 01b29000 edb91118
9f60:
eca99f7c 50d45f32 00021000 ec8fc900 00000003 ec8fc900 00008914 7ee9fc38
9f80:
eca98000 00000036 00000003 80285a6c 00086364 7ee9fe1c 000000c3 00000036
9fa0:
801011c4 80101000 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364
9fc0:
00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003
9fe0:
000a42b8 7ee9fbd4 00019914 76e09acc 600c0010 00000003 00000000 00000000
[<
7f26a91c>] (brcmf_cfg80211_up [brcmfmac]) from [<
7f27262c>] (brcmf_netdev_open+0x74/0xe8 [brcmfmac])
[<
7f27262c>] (brcmf_netdev_open [brcmfmac]) from [<
80772008>] (__dev_open+0xcc/0x150)
[<
80772008>] (__dev_open) from [<
807723d0>] (__dev_change_flags+0x168/0x1b4)
[<
807723d0>] (__dev_change_flags) from [<
80772434>] (dev_change_flags+0x18/0x48)
[<
80772434>] (dev_change_flags) from [<
80805f70>] (devinet_ioctl+0x67c/0x79c)
[<
80805f70>] (devinet_ioctl) from [<
80808b9c>] (inet_ioctl+0x210/0x3d4)
[<
80808b9c>] (inet_ioctl) from [<
8074721c>] (sock_ioctl+0x350/0x524)
[<
8074721c>] (sock_ioctl) from [<
80285138>] (do_vfs_ioctl+0xb0/0x9b0)
[<
80285138>] (do_vfs_ioctl) from [<
80285a6c>] (ksys_ioctl+0x34/0x5c)
[<
80285a6c>] (ksys_ioctl) from [<
80101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeca99fa8 to 0xeca99ff0)
9fa0:
00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364
9fc0:
00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003
9fe0:
000a42b8 7ee9fbd4 00019914 76e09acc
Code:
e5970328 eb002021 e1a02006 e3a01002 (
e5909008)
---[ end trace
5cbac2333f3ac5df ]---
Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Piotr Figiel [Fri, 8 Mar 2019 15:25:04 +0000 (15:25 +0000)]
brcmfmac: fix race during disconnect when USB completion is in progress
[ Upstream commit
db3b9e2e1d58080d0754bdf9293dabf8c6491b67 ]
It was observed that rarely during USB disconnect happening shortly after
connect (before full initialization completes) usb_hub_wq would wait
forever for the dev_init_lock to be unlocked. dev_init_lock would remain
locked though because of infinite wait during usb_kill_urb:
[ 2730.656472] kworker/0:2 D 0 260 2 0x00000000
[ 2730.660700] Workqueue: events request_firmware_work_func
[ 2730.664807] [<
809dca20>] (__schedule) from [<
809dd164>] (schedule+0x4c/0xac)
[ 2730.670587] [<
809dd164>] (schedule) from [<
8069af44>] (usb_kill_urb+0xdc/0x114)
[ 2730.676815] [<
8069af44>] (usb_kill_urb) from [<
7f258b50>] (brcmf_usb_free_q+0x34/0xa8 [brcmfmac])
[ 2730.684833] [<
7f258b50>] (brcmf_usb_free_q [brcmfmac]) from [<
7f2517d4>] (brcmf_detach+0xa0/0xb8 [brcmfmac])
[ 2730.693557] [<
7f2517d4>] (brcmf_detach [brcmfmac]) from [<
7f251a34>] (brcmf_attach+0xac/0x3d8 [brcmfmac])
[ 2730.702094] [<
7f251a34>] (brcmf_attach [brcmfmac]) from [<
7f2587ac>] (brcmf_usb_probe_phase2+0x468/0x4a0 [brcmfmac])
[ 2730.711601] [<
7f2587ac>] (brcmf_usb_probe_phase2 [brcmfmac]) from [<
7f252888>] (brcmf_fw_request_done+0x194/0x220 [brcmfmac])
[ 2730.721795] [<
7f252888>] (brcmf_fw_request_done [brcmfmac]) from [<
805748e4>] (request_firmware_work_func+0x4c/0x88)
[ 2730.731125] [<
805748e4>] (request_firmware_work_func) from [<
80141474>] (process_one_work+0x228/0x808)
[ 2730.739223] [<
80141474>] (process_one_work) from [<
80141a80>] (worker_thread+0x2c/0x564)
[ 2730.746105] [<
80141a80>] (worker_thread) from [<
80147bcc>] (kthread+0x13c/0x16c)
[ 2730.752227] [<
80147bcc>] (kthread) from [<
801010b4>] (ret_from_fork+0x14/0x20)
[ 2733.099695] kworker/0:3 D 0 1065 2 0x00000000
[ 2733.103926] Workqueue: usb_hub_wq hub_event
[ 2733.106914] [<
809dca20>] (__schedule) from [<
809dd164>] (schedule+0x4c/0xac)
[ 2733.112693] [<
809dd164>] (schedule) from [<
809e2a8c>] (schedule_timeout+0x214/0x3e4)
[ 2733.119621] [<
809e2a8c>] (schedule_timeout) from [<
809dde2c>] (wait_for_common+0xc4/0x1c0)
[ 2733.126810] [<
809dde2c>] (wait_for_common) from [<
7f258d00>] (brcmf_usb_disconnect+0x1c/0x4c [brcmfmac])
[ 2733.135206] [<
7f258d00>] (brcmf_usb_disconnect [brcmfmac]) from [<
8069e0c8>] (usb_unbind_interface+0x5c/0x1e4)
[ 2733.143943] [<
8069e0c8>] (usb_unbind_interface) from [<
8056d3e8>] (device_release_driver_internal+0x164/0x1fc)
[ 2733.152769] [<
8056d3e8>] (device_release_driver_internal) from [<
8056c078>] (bus_remove_device+0xd0/0xfc)
[ 2733.161138] [<
8056c078>] (bus_remove_device) from [<
8056977c>] (device_del+0x11c/0x310)
[ 2733.167939] [<
8056977c>] (device_del) from [<
8069cba8>] (usb_disable_device+0xa0/0x1cc)
[ 2733.174743] [<
8069cba8>] (usb_disable_device) from [<
8069507c>] (usb_disconnect+0x74/0x1dc)
[ 2733.181823] [<
8069507c>] (usb_disconnect) from [<
80695e88>] (hub_event+0x478/0xf88)
[ 2733.188278] [<
80695e88>] (hub_event) from [<
80141474>] (process_one_work+0x228/0x808)
[ 2733.194905] [<
80141474>] (process_one_work) from [<
80141a80>] (worker_thread+0x2c/0x564)
[ 2733.201724] [<
80141a80>] (worker_thread) from [<
80147bcc>] (kthread+0x13c/0x16c)
[ 2733.207913] [<
80147bcc>] (kthread) from [<
801010b4>] (ret_from_fork+0x14/0x20)
It was traced down to a case where usb_kill_urb would be called on an URB
structure containing more or less random data, including large number in
its use_count. During the debugging it appeared that in brcmf_usb_free_q()
the traversal over URBs' lists is not synchronized with operations on those
lists in brcmf_usb_rx_complete() leading to handling
brcmf_usbdev_info structure (holding lists' head) as lists' element and in
result causing above problem.
Fix it by walking through all URBs during brcmf_cancel_all_urbs using the
arrays of requests instead of linked lists.
Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Piotr Figiel [Mon, 4 Mar 2019 15:42:49 +0000 (15:42 +0000)]
brcmfmac: fix WARNING during USB disconnect in case of unempty psq
[ Upstream commit
c80d26e81ef1802f30364b4ad1955c1443a592b9 ]
brcmu_pkt_buf_free_skb emits WARNING when attempting to free a sk_buff
which is part of any queue. After USB disconnect this may have happened
when brcmf_fws_hanger_cleanup() is called as per-interface psq was never
cleaned when removing the interface.
Change brcmf_fws_macdesc_cleanup() in a way that it removes the
corresponding packets from hanger table (to avoid double-free when
brcmf_fws_hanger_cleanup() is called) and add a call to clean-up the
interface specific packet queue.
Below is a WARNING during USB disconnect with Raspberry Pi WiFi dongle
running in AP mode. This was reproducible when the interface was
transmitting during the disconnect and is fixed with this commit.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1171 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x3c/0x40
Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core
CPU: 0 PID: 1171 Comm: kworker/0:0 Not tainted 4.19.23-00075-gde33ed8 #99
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: usb_hub_wq hub_event
[<
8010ff84>] (unwind_backtrace) from [<
8010bb64>] (show_stack+0x10/0x14)
[<
8010bb64>] (show_stack) from [<
80840278>] (dump_stack+0x88/0x9c)
[<
80840278>] (dump_stack) from [<
8011f5ec>] (__warn+0xfc/0x114)
[<
8011f5ec>] (__warn) from [<
8011f71c>] (warn_slowpath_null+0x40/0x48)
[<
8011f71c>] (warn_slowpath_null) from [<
805a476c>] (brcmu_pkt_buf_free_skb+0x3c/0x40)
[<
805a476c>] (brcmu_pkt_buf_free_skb) from [<
805bb6c4>] (brcmf_fws_cleanup+0x1e4/0x22c)
[<
805bb6c4>] (brcmf_fws_cleanup) from [<
805bc854>] (brcmf_fws_del_interface+0x58/0x68)
[<
805bc854>] (brcmf_fws_del_interface) from [<
805b66ac>] (brcmf_remove_interface+0x40/0x150)
[<
805b66ac>] (brcmf_remove_interface) from [<
805b6870>] (brcmf_detach+0x6c/0xb0)
[<
805b6870>] (brcmf_detach) from [<
805bdbb8>] (brcmf_usb_disconnect+0x30/0x4c)
[<
805bdbb8>] (brcmf_usb_disconnect) from [<
805e5d64>] (usb_unbind_interface+0x5c/0x1e0)
[<
805e5d64>] (usb_unbind_interface) from [<
804aab10>] (device_release_driver_internal+0x154/0x1ec)
[<
804aab10>] (device_release_driver_internal) from [<
804a97f4>] (bus_remove_device+0xcc/0xf8)
[<
804a97f4>] (bus_remove_device) from [<
804a6fc0>] (device_del+0x118/0x308)
[<
804a6fc0>] (device_del) from [<
805e488c>] (usb_disable_device+0xa0/0x1c8)
[<
805e488c>] (usb_disable_device) from [<
805dcf98>] (usb_disconnect+0x70/0x1d8)
[<
805dcf98>] (usb_disconnect) from [<
805ddd84>] (hub_event+0x464/0xf50)
[<
805ddd84>] (hub_event) from [<
80135a70>] (process_one_work+0x138/0x3f8)
[<
80135a70>] (process_one_work) from [<
80135d5c>] (worker_thread+0x2c/0x554)
[<
80135d5c>] (worker_thread) from [<
8013b1a0>] (kthread+0x124/0x154)
[<
8013b1a0>] (kthread) from [<
801010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xecf8dfb0 to 0xecf8dff8)
dfa0:
00000000 00000000 00000000 00000000
dfc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0:
00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace
38d234018e9e2a90 ]---
------------[ cut here ]------------
Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Piotr Figiel [Wed, 13 Mar 2019 09:52:42 +0000 (09:52 +0000)]
brcmfmac: convert dev_init_lock mutex to completion
[ Upstream commit
a9fd0953fa4a62887306be28641b4b0809f3b2fd ]
Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when
kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion
which silences those warnings and improves code readability.
Fix below errors when connecting the USB WiFi dongle:
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2
BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434
last function: hub_event
1 lock held by kworker/0:2/434:
#0:
18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac]
CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: usb_hub_wq hub_event
[<
8011237c>] (unwind_backtrace) from [<
8010d74c>] (show_stack+0x10/0x14)
[<
8010d74c>] (show_stack) from [<
809c4324>] (dump_stack+0xa8/0xd4)
[<
809c4324>] (dump_stack) from [<
8014195c>] (process_one_work+0x710/0x808)
[<
8014195c>] (process_one_work) from [<
80141a80>] (worker_thread+0x2c/0x564)
[<
80141a80>] (worker_thread) from [<
80147bcc>] (kthread+0x13c/0x16c)
[<
80147bcc>] (kthread) from [<
801010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xed1d9fb0 to 0xed1d9ff8)
9fa0:
00000000 00000000 00000000 00000000
9fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0:
00000000 00000000 00000000 00000000 00000013 00000000
======================================================
WARNING: possible circular locking dependency detected
4.19.23-00084-g454a789-dirty #123 Not tainted
------------------------------------------------------
kworker/0:2/434 is trying to acquire lock:
e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808
but task is already holding lock:
18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&devinfo->dev_init_lock){+.+.}:
mutex_lock_nested+0x1c/0x24
brcmf_usb_probe+0x78/0x550 [brcmfmac]
usb_probe_interface+0xc0/0x1bc
really_probe+0x228/0x2c0
__driver_attach+0xe4/0xe8
bus_for_each_dev+0x68/0xb4
bus_add_driver+0x19c/0x214
driver_register+0x78/0x110
usb_register_driver+0x84/0x148
process_one_work+0x228/0x808
worker_thread+0x2c/0x564
kthread+0x13c/0x16c
ret_from_fork+0x14/0x20
(null)
-> #1 (brcmf_driver_work){+.+.}:
worker_thread+0x2c/0x564
kthread+0x13c/0x16c
ret_from_fork+0x14/0x20
(null)
-> #0 ((wq_completion)"events"){+.+.}:
process_one_work+0x1b8/0x808
worker_thread+0x2c/0x564
kthread+0x13c/0x16c
ret_from_fork+0x14/0x20
(null)
other info that might help us debug this:
Chain exists of:
(wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&devinfo->dev_init_lock);
lock(brcmf_driver_work);
lock(&devinfo->dev_init_lock);
lock((wq_completion)"events");
*** DEADLOCK ***
1 lock held by kworker/0:2/434:
#0:
18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac]
stack backtrace:
CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events request_firmware_work_func
[<
8011237c>] (unwind_backtrace) from [<
8010d74c>] (show_stack+0x10/0x14)
[<
8010d74c>] (show_stack) from [<
809c4324>] (dump_stack+0xa8/0xd4)
[<
809c4324>] (dump_stack) from [<
80172838>] (print_circular_bug+0x210/0x330)
[<
80172838>] (print_circular_bug) from [<
80175940>] (__lock_acquire+0x160c/0x1a30)
[<
80175940>] (__lock_acquire) from [<
8017671c>] (lock_acquire+0xe0/0x268)
[<
8017671c>] (lock_acquire) from [<
80141404>] (process_one_work+0x1b8/0x808)
[<
80141404>] (process_one_work) from [<
80141a80>] (worker_thread+0x2c/0x564)
[<
80141a80>] (worker_thread) from [<
80147bcc>] (kthread+0x13c/0x16c)
[<
80147bcc>] (kthread) from [<
801010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xed1d9fb0 to 0xed1d9ff8)
9fa0:
00000000 00000000 00000000 00000000
9fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0:
00000000 00000000 00000000 00000000 00000013 00000000
Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 22 Mar 2019 14:37:02 +0000 (15:37 +0100)]
b43: shut up clang -Wuninitialized variable warning
[ Upstream commit
d825db346270dbceef83b7b750dbc29f1d7dcc0e ]
Clang warns about what is clearly a case of passing an uninitalized
variable into a static function:
drivers/net/wireless/broadcom/b43/phy_lp.c:1852:23: error: variable 'gains' is uninitialized when used here
[-Werror,-Wuninitialized]
lpphy_papd_cal(dev, gains, 0, 1, 30);
^~~~~
drivers/net/wireless/broadcom/b43/phy_lp.c:1838:2: note: variable 'gains' is declared here
struct lpphy_tx_gains gains, oldgains;
^
1 error generated.
However, this function is empty, and its arguments are never evaluated,
so gcc in contrast does not warn here. Both compilers behave in a
reasonable way as far as I can tell, so we should change the code
to avoid the warning everywhere.
We could just eliminate the lpphy_papd_cal() function entirely,
given that it has had the TODO comment in it for 10 years now
and is rather unlikely to ever get done. I'm doing a simpler
change here, and just pass the 'oldgains' variable in that has
been initialized, based on the guess that this is what was
originally meant.
Fixes:
2c0d6100da3e ("b43: LP-PHY: Begin implementing calibration & software RFKILL support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 15 Mar 2019 17:04:32 +0000 (12:04 -0500)]
brcmfmac: fix missing checks for kmemdup
[ Upstream commit
46953f97224d56a12ccbe9c6acaa84ca0dab2780 ]
In case kmemdup fails, the fix sets conn_info->req_ie_len and
conn_info->resp_ie_len to zero to avoid buffer overflows.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Tue, 12 Mar 2019 07:03:58 +0000 (15:03 +0800)]
mwifiex: Fix mem leak in mwifiex_tm_cmd
[ Upstream commit
003b686ace820ce2d635a83f10f2d7f9c147dabc ]
'hostcmd' is alloced by kzalloc, should be freed before
leaving from the error handling cases, otherwise it will
cause mem leak.
Fixes:
3935ccc14d2c ("mwifiex: add cfg80211 testmode support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Tue, 12 Mar 2019 07:56:33 +0000 (02:56 -0500)]
rtlwifi: fix a potential NULL pointer dereference
[ Upstream commit
765976285a8c8db3f0eb7f033829a899d0c2786e ]
In case alloc_workqueue fails, the fix reports the error and
returns to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel T. Lee [Wed, 3 Apr 2019 22:17:55 +0000 (07:17 +0900)]
selftests/bpf: ksym_search won't check symbols exists
[ Upstream commit
0979ff7992fb6f4eb837995b12f4071dcafebd2d ]
Currently, ksym_search located at trace_helpers won't check symbols are
existing or not.
In ksym_search, when symbol is not found, it will return &syms[0](_stext).
But when the kernel symbols are not loaded, it will return NULL, which is
not a desired action.
This commit will add verification logic whether symbols are loaded prior
to the symbol search.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Chen [Thu, 28 Feb 2019 22:16:48 +0000 (14:16 -0800)]
iio: adc: ti-ads7950: Fix improper use of mlock
[ Upstream commit
abbde2792999c9ad3514dd25d7f8d9a96034fe16 ]
Indio->mlock is used for protecting the different iio device modes.
It is currently not being used in this way. Replace the lock with
an internal lock specifically used for protecting the SPI transfer
buffer.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Thu, 7 Mar 2019 21:45:46 +0000 (14:45 -0700)]
iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data
[ Upstream commit
6f9ca1d3eb74b81f811a87002de2d51640d135b1 ]
When building with -Wsometimes-uninitialized, Clang warns:
drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable
'calculated_time' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
While it isn't wrong, this will never be a problem because
iio_push_to_buffers_with_timestamp only uses calculated_time
on the same condition that it is assigned (when scan_timestamp
is not zero). While iio_push_to_buffers_with_timestamp is marked
as inline, Clang does inlining in the optimization stage, which
happens after the semantic analysis phase (plus inline is merely
a hint to the compiler).
Fix this by just zero initializing calculated_time.
Link: https://github.com/ClangBuiltLinux/linux/issues/394
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Sat, 16 Mar 2019 22:08:33 +0000 (17:08 -0500)]
iio: hmc5843: fix potential NULL pointer dereferences
[ Upstream commit
536cc27deade8f1ec3c1beefa60d5fbe0f6fcb28 ]
devm_regmap_init_i2c may fail and return NULL. The fix returns
the error when it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars-Peter Clausen [Tue, 19 Mar 2019 11:37:55 +0000 (13:37 +0200)]
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
[ Upstream commit
df1d80aee963480c5c2938c64ec0ac3e4a0df2e0 ]
For devices from the SigmaDelta family we need to keep CS low when doing a
conversion, since the device will use the MISO line as a interrupt to
indicate that the conversion is complete.
This is why the driver locks the SPI bus and when the SPI bus is locked
keeps as long as a conversion is going on. The current implementation gets
one small detail wrong though. CS is only de-asserted after the SPI bus is
unlocked. This means it is possible for a different SPI device on the same
bus to send a message which would be wrongfully be addressed to the
SigmaDelta device as well. Make sure that the last SPI transfer that is
done while holding the SPI bus lock de-asserts the CS signal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <Alexandru.Ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Wed, 3 Apr 2019 16:04:13 +0000 (00:04 +0800)]
drm/pl111: fix possible object reference leak
[ Upstream commit
bc29d3a69d4c1bd1a103e8b3c1ed81b807c1870b ]
The call to of_find_matching_node_and_match returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD)
Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Thu, 4 Apr 2019 21:40:27 +0000 (14:40 -0700)]
x86/build: Keep local relocations with ld.lld
[ Upstream commit
7c21383f3429dd70da39c0c7f1efa12377a47ab6 ]
The LLVM linker (ld.lld) defaults to removing local relocations, which
causes KASLR boot failures. ld.bfd and ld.gold already handle this
correctly. This adds the explicit instruction "--discard-none" during
the link phase. There is no change in output for ld.bfd and ld.gold,
but ld.lld now produces an image with all the needed relocations.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190404214027.GA7324@beast
Link: https://github.com/ClangBuiltLinux/linux/issues/404
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Kozub [Thu, 14 Feb 2019 00:15:53 +0000 (01:15 +0100)]
block: sed-opal: fix IOC_OPAL_ENABLE_DISABLE_MBR
[ Upstream commit
78bf47353b0041865564deeed257a54f047c2fdc ]
The implementation of IOC_OPAL_ENABLE_DISABLE_MBR handled the value
opal_mbr_data.enable_disable incorrectly: enable_disable is expected
to be one of OPAL_MBR_ENABLE(0) or OPAL_MBR_DISABLE(1). enable_disable
was passed directly to set_mbr_done and set_mbr_enable_disable where
is was interpreted as either OPAL_TRUE(1) or OPAL_FALSE(0). The end
result was that calling IOC_OPAL_ENABLE_DISABLE_MBR with OPAL_MBR_ENABLE
actually disabled the shadow MBR and vice versa.
This patch adds correct conversion from OPAL_MBR_DISABLE/ENABLE to
OPAL_FALSE/TRUE. The change affects existing programs using
IOC_OPAL_ENABLE_DISABLE_MBR but this is typically used only once when
setting up an Opal drive.
Acked-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Mon, 1 Apr 2019 01:37:50 +0000 (09:37 +0800)]
cpufreq: kirkwood: fix possible object reference leak
[ Upstream commit
7c468966f05ac9c17bb5948275283d34e6fe0660 ]
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/kirkwood-cpufreq.c:127:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function.
./drivers/cpufreq/kirkwood-cpufreq.c:133:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function.
and also do some cleanup:
- of_node_put(np);
- np = NULL;
...
of_node_put(np);
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Mon, 1 Apr 2019 01:37:53 +0000 (09:37 +0800)]
cpufreq: pmac32: fix possible object reference leak
[ Upstream commit
8d10dc28a9ea6e8c02e825dab28699f3c72b02d9 ]
The call to of_find_node_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/pmac32-cpufreq.c:557:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function.
./drivers/cpufreq/pmac32-cpufreq.c:569:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function.
./drivers/cpufreq/pmac32-cpufreq.c:598:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 587, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-pm@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Mon, 1 Apr 2019 01:37:52 +0000 (09:37 +0800)]
cpufreq/pasemi: fix possible object reference leak
[ Upstream commit
a9acc26b75f652f697e02a9febe2ab0da648a571 ]
The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/pasemi-cpufreq.c:212:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function.
./drivers/cpufreq/pasemi-cpufreq.c:220:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Mon, 1 Apr 2019 01:37:54 +0000 (09:37 +0800)]
cpufreq: ppc_cbe: fix possible object reference leak
[ Upstream commit
233298032803f2802fe99892d0de4ab653bfece4 ]
The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kristian Evensen [Sun, 7 Apr 2019 13:39:09 +0000 (15:39 +0200)]
qmi_wwan: Add quirk for Quectel dynamic config
[ Upstream commit
e4bf63482c309287ca84d91770ffa7dcc18e37eb ]
Most, if not all, Quectel devices use dynamic interface numbers, and
users are able to change the USB configuration at will. Matching on for
example interface number is therefore not possible.
Instead, the QMI device can be identified by looking at the interface
class, subclass and protocol (all 0xff), as well as the number of
endpoints. The reason we need to look at the number of endpoints, is
that the diagnostic port interface has the same class, subclass and
protocol as QMI. However, the diagnostic port only has two endpoints,
while QMI has three.
Until now, we have identified the QMI device by combining a match on
class, subclass and protocol, with a call to the function
quectel_diag_detect(). In quectel_diag_detect(), we check if the number
of endpoints matches for known Quectel vendor/product ids.
Adding new vendor/product ids to quectel_diag_detect() is not a good
long-term solution. This commit replaces the function with a quirk, and
applies the quirk to affected Quectel devices that I have been able to
test the change with (EP06, EM12 and EC25). If the quirk is set and the
number of endpoints equal two, we return from qmi_wwan_probe() with
-ENODEV.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roman Gushchin [Mon, 8 Apr 2019 22:12:30 +0000 (15:12 -0700)]
selftests: cgroup: fix cleanup path in test_memcg_subtree_control()
[ Upstream commit
e14d314c7a489f060d6d691866fef5f131281718 ]
Dan reported, that cleanup path in test_memcg_subtree_control()
triggers a static checker warning:
./tools/testing/selftests/cgroup/test_memcontrol.c:76 \
test_memcg_subtree_control()
error: uninitialized symbol 'child2'.
Fix this by initializing child2 and parent2 variables and
split the cleanup path into few stages.
Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes:
84092dbcf901 ("selftests: cgroup: add memory controller self-tests")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 8 Apr 2019 21:26:20 +0000 (23:26 +0200)]
s390: cio: fix cio_irb declaration
[ Upstream commit
e91012ee855ad9f5ef2ab106a3de51db93fe4d0c ]
clang points out that the declaration of cio_irb does not match the
definition exactly, it is missing the alignment attribute:
../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection]
DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED'
DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \
^
../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name; \
^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \
^
../drivers/s390/cio/cio.h:118:1: note: previous attribute is here
DECLARE_PER_CPU(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU'
DECLARE_PER_CPU_SECTION(type, name, "")
^
../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name
^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \
^
Use DECLARE_PER_CPU_ALIGNED() here, to make the two match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>