Thomas Hellstrom [Fri, 10 May 2019 11:45:19 +0000 (13:45 +0200)]
pipebuffer, winsys/svga: Add functionality to update pb_validate_entry flags
In order to be able to add access modes to a pb_validate_entry, update
the pb_validate_add_buffer function to take a pointer hash table and also
to return whether the buffer was already on the validate list.
Update the svga winsys accordingly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Wed, 8 May 2019 14:26:27 +0000 (16:26 +0200)]
svga: Set the rendered-to flag for dma transfers to surfaces
The rendered-to flag indicates that the HW surface content is more recent
than the content of the mob. That's the case after a SurfaceDMA transfer
to the surface.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Wed, 8 May 2019 13:57:09 +0000 (15:57 +0200)]
winsys/svga: Fix RELOC_INTERNAL mob GPU access
SVGA_RELOC_INTERNAL indicates a transfer between surface and backing mob.
This means that if the GPU for example reads from the surface it writes
to the backing mob. But since the buffer mapping code allows for
simultaneous gpu- and cpu read access, a read from the surface to the mob
will not synchronize a subsequent map to the readback.
Fix this by inverting the mob access mode in a surface relocation with
SVGA_RELOC_INTERNAL set.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Wed, 8 May 2019 13:50:18 +0000 (15:50 +0200)]
svga: Remove the surface_invalidate winsys function
Instead unconditionally call SVGA3D_InvalidateGBSurface() since it's needed
also for Linux for dirty buffers and operation without SurfaceDMA.
For non-guest-backed operation, remove the surface cache surface invalidation
altogether.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Gert Wollny [Thu, 16 May 2019 12:48:50 +0000 (14:48 +0200)]
Revert "softpipe/buffer: load only as many components as the the buffer resource type provides"
This reverts commit
865b9ddae4874186182e529b5fd154ab04a61f79.
The buffer always reports format PIPE_FORMAT_R8_UNORM so with this patch only
one component would be supported. The original issue is still relevant, but
the fix should be different.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 17 May 2019 02:20:19 +0000 (12:20 +1000)]
glsl/nir: init non-static class member.
glsl_to_nir.cpp:276: uninit_member: Non-static class member "sig" is not initialized in this constructor nor in any functions that it calls.
Reported by coverity
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Dave Airlie [Fri, 17 May 2019 01:26:57 +0000 (11:26 +1000)]
imgui: fix undefined behaviour bitshift.
imgui_draw.cpp:1781: error[shiftTooManyBitsSigned]: Shifting signed 32-bit value by 31 bits is undefined behaviour
Reported by coverity
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Dave Airlie [Fri, 17 May 2019 01:25:48 +0000 (11:25 +1000)]
glsl: init non-static class member in link uniforms. (v2)
link_uniforms.cpp:477: uninit_member: Non-static class member "shader_storage_blocks_write_access" is not initialized in this constructor nor in any functions that it calls.
Reported by coverity.
v2: fix 9->0 typo (Ilia)
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Dave Airlie [Fri, 17 May 2019 01:23:36 +0000 (11:23 +1000)]
glsl: init packed in more constructors.
src/compiler/glsl_types.cpp:577: uninit_member: Non-static class member "packed" is not initialized in this constructor nor in any functions that it calls.
from Coverity.
Fixes:
659f333b3a4 (glsl: add packed for struct types)
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Alyssa Rosenzweig [Fri, 17 May 2019 00:14:49 +0000 (00:14 +0000)]
panfrost: Cleanup leak todos
Many of these are now patched; one of them we patch here. Regardless,
this is one less thing to worry about in the code, I suppose.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Thu, 16 May 2019 23:42:33 +0000 (23:42 +0000)]
panfrost: assert(0) -> unreachable for some switch
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Nanley Chery [Tue, 30 Apr 2019 21:49:10 +0000 (14:49 -0700)]
anv: Fix some depth buffer sampling cases on ICL+
Don't attempt sampling with HiZ if the sampler lacks support for it. On
ICL, the HW docs state that sampling with HiZ is not supported and that
instances of AUX_HIZ in the RENDER_SURFACE_STATE object will be
interpreted as AUX_NONE.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Caio Marcelo de Oliveira Filho [Tue, 7 May 2019 08:49:42 +0000 (01:49 -0700)]
nir: Only convert SSA values to regs when needed
If the SSA def produced by this instruction is only in the block in
which it is defined and is not used by ifs or phis, then we don't have
a reason to convert it to a register in
nir_lower_ssa_defs_to_regs_block().
The special case for derefs is covered by the general case, so can be
removed: at this point all derefs in the block are
materialized (i.e. the whole deref chain is in the block) and derefs
are not used in phis.
v2: Fix wrong check for if_uses. If there's such an use, the def is
not "local_to_block". (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Wed, 15 May 2019 20:58:33 +0000 (13:58 -0700)]
st/mesa: Record samplers for extra planes in info->textures_used.
Normally gl_nir_lower_samplers_as_deref records info->textures_used
for us, but this pass runs after that, attempting to assign samplers
in the same order as st_atom_texture's external_samplers_used loop
so the stars align and we get the same locations.
Since we're adding textures late, we need to amend info->textures_used.
iris uses info->textures_used to set up texture bindings; this fixes
Piglit's ext_image_dma_buf_import-sample-{nv12,yuv420,yvu420} there.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Caio Marcelo de Oliveira Filho [Sat, 11 May 2019 07:15:41 +0000 (00:15 -0700)]
nir: Fix nir_opt_idiv_const when negatives are involved
First, allow the case for negative powers of two. Then ensure that we
use the absolute value of the non-constant value to calculate the
quotient -- this was hinted in the code by the name 'uq'.
This fixes an issue when 'd' is positive and 'n' is negative. The
ishr will propagate the negative sign and we'll use nir_ineg() again,
incorrectly.
v2: First version used only ishr, but that isn't sufficient, since it
never can produce a zero as a result. (Jason)
Allow negative powers of two. (Caio)
Fixes:
74492ebad94 "nir: Add a pass for lowering integer division by constants"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Eric Anholt [Tue, 14 May 2019 23:24:33 +0000 (16:24 -0700)]
freedreno: Log the number of loops in the shader for shader-db.
shader-db's report.py will use this to see when we've changed loop
unrolling behavior on a shader and skip including other stats like
instruction count from being considered for that shader, since they won't
be useful as a proxy for real world performance in that case.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eduardo Lima Mitev <elima@igalia.com>
Eric Anholt [Tue, 14 May 2019 23:02:17 +0000 (16:02 -0700)]
freedreno: Output the same shader-db format as v3d and intel.
This lets us reuse their report.py, at the expense of fd-report.py no
longer working.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eduardo Lima Mitev <elima@igalia.com>
Eric Anholt [Tue, 14 May 2019 00:06:47 +0000 (17:06 -0700)]
freedreno: Remove the ir3_tgsi_to_nir() helper function.
It was more of a hindrance, as it pretended that we could compile in the
driver with a missing screen.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eduardo Lima Mitev <elima@igalia.com>
Eric Anholt [Mon, 13 May 2019 23:58:51 +0000 (16:58 -0700)]
freedreno: Fix assertion failures in context setup in shader-db mode.
The TTN path needs access to the screen to make the right decisions about
lowering, but we didn't have pctx->screen set up at fdN_prog_init time.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eduardo Lima Mitev <elima@igalia.com>
Marek Olšák [Thu, 9 May 2019 00:13:17 +0000 (20:13 -0400)]
ac: match radeonsi code in ac_shader_binary_read_config
Marek Olšák [Thu, 9 May 2019 00:49:58 +0000 (20:49 -0400)]
r600+radeonsi: use ctx_query_reset_status on radeon
This allows a nice cleanup, because the winsys always handles it.
Marek Olšák [Thu, 9 May 2019 00:45:26 +0000 (20:45 -0400)]
winsys/radeon: implement ctx_query_reset_status by copying radeonsi
To make it behave like amdgpu. I'm just trying to move this out of
radeonsi. The radeonsi code will be removed in the next commit.
Marek Olšák [Thu, 9 May 2019 00:13:46 +0000 (20:13 -0400)]
winsys/amdgpu: report a CS rejection as a reset only if there's no GPU reset
Marek Olšák [Fri, 10 May 2019 05:14:07 +0000 (01:14 -0400)]
radeonsi: update buffer descriptors in all contexts after buffer invalidation
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108824
Cc: 19.1 <mesa-stable@lists.freedesktop.org>
Marek Olšák [Fri, 10 May 2019 04:40:19 +0000 (00:40 -0400)]
radeonsi: remove old_va parameter from si_rebind_buffer by remembering offsets
This is a prerequisite for the next commit.
Cc: 19.1 <mesa-stable@lists.freedesktop.org>
Marek Olšák [Tue, 26 Feb 2019 21:13:08 +0000 (16:13 -0500)]
radeonsi: compute culling - flush CS to remove write references to buffers
Only read-only buffers can use compute culling.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 26 Feb 2019 03:53:37 +0000 (22:53 -0500)]
radeonsi: invalidate caches at the beginning of the prim discard compute IB
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 20 Feb 2019 16:42:05 +0000 (11:42 -0500)]
radeonsi: disable primitive restart for triangles for DiRT Rally
It may decrease performance and it prevents compute-based primitive culling.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 20 Feb 2019 04:27:16 +0000 (23:27 -0500)]
radeonsi: add primitive culling stats to the HUD
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 14 Aug 2018 06:01:18 +0000 (02:01 -0400)]
radeonsi: cull primitives with async compute for large draw calls
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 4 Apr 2019 14:02:27 +0000 (10:02 -0400)]
winsys/amdgpu: add REWIND emulation via INDIRECT_BUFFER into cs_check_space
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 12 Feb 2019 20:26:41 +0000 (15:26 -0500)]
radeonsi: add si_vs_prolog_bits::unpack_instance_id_from_vertex_id:1
The prim discard compute shader bakes InstanceID into the output index buffer.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 12 Feb 2019 19:49:55 +0000 (14:49 -0500)]
radeonsi: make some functions non-static
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 12 Feb 2019 19:38:31 +0000 (14:38 -0500)]
radeonsi: allow si_shader_select_with_key to return an optimized shader or fail
If a prim discard compute shader hasn't finished compilation, we don't want
to any shader.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 22 Sep 2018 05:32:20 +0000 (01:32 -0400)]
radeonsi: use pipe_draw_info::instance_count indirectly
It will be modified by compute shader culling.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Fri, 31 Aug 2018 02:15:13 +0000 (22:15 -0400)]
radeonsi: use pipe_draw_info::prim and primitive_restart indirectly
so that the fields can be changed by the driver.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 16 Aug 2018 01:41:52 +0000 (21:41 -0400)]
radeonsi: make functions for creating LLVM functions non-static
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Mon, 4 Feb 2019 22:48:04 +0000 (17:48 -0500)]
winsys/amdgpu: add a parallel compute IB coupled with a gfx IB
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 13 Feb 2019 02:02:04 +0000 (21:02 -0500)]
ac: add LLVM code for triangle culling
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 12 Feb 2019 20:03:13 +0000 (15:03 -0500)]
radeonsi: add a cs parameter into si_cp_copy_data
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 22 Jan 2019 22:22:18 +0000 (17:22 -0500)]
radeonsi: add a cs parameter into si_cp_release_mem
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 22 Jan 2019 22:18:01 +0000 (17:18 -0500)]
radeonsi: add threadgroups_per_cu param into si_get_compute_resource_limits
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 16 Aug 2018 01:39:52 +0000 (21:39 -0400)]
radeonsi: move si_*_descriptors_idx functions into si_state.h
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 16 Aug 2018 01:36:14 +0000 (21:36 -0400)]
radeonsi: make si_initialize_compute reusable
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 16 Aug 2018 01:29:31 +0000 (21:29 -0400)]
radeonsi: extract COMPUTE_RESOURCE_LIMITS code into a helper
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Mon, 13 Aug 2018 23:11:55 +0000 (19:11 -0400)]
radeonsi: return the last part's return value from @wrapper
The primitive discard compute shader will get the position output this way.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 23 Apr 2019 19:24:33 +0000 (15:24 -0400)]
winsys/amdgpu: always set NO_CPU_ACCESS and NO_SUBALLOC on GDS resources
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Jan Zielinski [Wed, 15 May 2019 15:04:15 +0000 (17:04 +0200)]
swr: clean up supported OGL4.0/4.1 extensions list
This commit adjusts the capabilities returned
by the SWR driver and the documentation to correctly
report the following extensions:
GL_ARB_texture_query_lod, GL_ARB_texture_cube_map_array,
GL_ARB_gpu_shader_fp64, GL_ARB_texture_gather,
GL_ARB_vertex_attrib_64bit.
Reviewed-by: Alok Hota <alok.hota@intel.com>
Leo Liu [Thu, 16 May 2019 14:24:01 +0000 (10:24 -0400)]
vl/dri3: set back buffer from output to NULL with front buffer case
Since the using output optimization is only for back buffer case
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Alejandro Piñeiro [Thu, 16 May 2019 09:32:23 +0000 (11:32 +0200)]
docs: advice to resolve discussion on gitlab MR doc
For newcomers to gitlab, it is not evident that it is better to press
the "Resolve Discussion" button when you update your branch handling
feedback.
v2:
* Fix several grammar nits, reorder, use new corrected text (Connor
Abbot)
* Use "reviewers", instead of reviewer (Eric Engestrom)
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Roland Scheidegger [Wed, 15 May 2019 18:35:21 +0000 (20:35 +0200)]
auxiliary/draw: fix crash with zero-stride draw auto
transform feedback draws get the number of vertices from the transform
feedback object. In draw, we'll figure this out with the number of bytes
written divided by the stride. However, it is apparently possible we end
up with a stride of 0 there (not entirely sure it could happen with GL).
Probably when nothing was actually ever written (so we don't actually
have a stride set). Just avoid the division by zero by setting the count
to 0.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Eric Engestrom [Wed, 1 May 2019 10:44:16 +0000 (11:44 +0100)]
util/os_file: always use the 'grow' mechanism
Use fstat() only to pre-allocate a big enough buffer.
This fixes a race where if the file grows between fstat() and read()
we would be missing the end of the file, and if the file slims down
read() would just fail.
Fixes:
316964709e21286c2af5 "util: add os_read_file() helper"
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Lionel Landwerlin [Wed, 15 May 2019 22:02:51 +0000 (23:02 +0100)]
nir: lower_non_uniform_access: iterate over instructions safely
This pass moves instructions around and adds control-flow in the
middle of blocks. We need to use nir_foreach_instr_safe to ensure that
we iterate over instructions correctly anyway.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes:
3bd545764151 ("nir: Add a lowering pass for non-uniform resource access")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Sun, 5 May 2019 09:39:23 +0000 (02:39 -0700)]
iris: Dodge more GLSL IR lowering
This avoids some lower_instructions bits in st.
Jason Ekstrand [Wed, 15 May 2019 17:06:38 +0000 (12:06 -0500)]
intel/fs/live_variables: Do compute_start_end in BITSET_WORD chunks
For a block with a contiguous chunk of 32 vars that don't need updating,
this lets us skip 32 vars at a time. Also, by using bitscan, we only
iterate for each set bit rather than testing them all one at a time.
Looking at perf (with -O0 which is unfortunately necessary to get
reasonable back-traces), this seems to cuts about 50-60% of the time
spent in compute_start_end() which is, itself about 4-6% of the
run-time. In the real world, with a release driver build, this cuts
1.34% off a full shader-db run. (I ran shader-db 5 times in each
configuration).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Jason Ekstrand [Wed, 15 May 2019 03:51:20 +0000 (22:51 -0500)]
intel/fs/ra: Choose a spill reg before throwing away the graph
Otherwise, we get an effectively random spill reg because we no longer
have the information from RA to guide us. Also, a completely clean
graph has undefined data in in_stack which is used for choosing the
spill reg so it really is non-deterministic.
Fixes:
e99081e76d4 "intel/fs/ra: Spill without destroying the..."
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jason Ekstrand [Wed, 15 May 2019 04:03:29 +0000 (23:03 -0500)]
intel/fs/ra: Add spill costs to the graph on-demand
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jason Ekstrand [Wed, 15 May 2019 04:02:42 +0000 (23:02 -0500)]
intel/fs/ra: Add a helper for discarding the interference graph
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Alyssa Rosenzweig [Wed, 15 May 2019 05:03:19 +0000 (05:03 +0000)]
nir/algebraic: Remove problematic "optimization"
This line is no longer relevant now that booleans are 1-bit, and in fact
causes issues (infinite progress loop between algebraic optimizations
and copy prop) with constant vector masks.
No shader-db changes on Intel platforms (Jason).
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Alyssa Rosenzweig [Tue, 14 May 2019 04:11:36 +0000 (04:11 +0000)]
panfrost/midgard: Add load/store opcodes
This commit adds a bunch of new load/store opcodes, largely related to
OpenCL, as well as adjusting the name of existing opcodes to be more
uniform. The immediate effect is compute shaders are substantially
easier to interpret now.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Wed, 15 May 2019 01:28:08 +0000 (01:28 +0000)]
panfrost/midgard: Enable integer constant inlining
Midgard ALU features two types of constants: embedded constants (128-bit
chunk, zero/one per schedule bundle) and inline constants (16-bit
splattered into the op, second source if present). Inline constants are
much more efficient from a space and scheduling freedom standpoint, so
it's desirable to inline when possible. Now that integer ops are well
understood and in use, we enable inlining of integers constants in
addition to floats (which have been inlined since forever).
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Wed, 15 May 2019 01:19:22 +0000 (01:19 +0000)]
panfrost/midgard: Remove imov workaround
The previous commit fixes the issue this patched around.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Wed, 15 May 2019 01:16:51 +0000 (01:16 +0000)]
panfrost/midgard: Set int outmod for ops writing integers
By default, the "normal" output modifier is set on ALU ops. This is the
correct default for float outputs -- for floats, it preserves the semantic
value. Unfortunately, when used with integers, it does not preserve the
bitstream encoding, causing misbehaviour. (It's an open question what
happens when `normal` is used with integers -- does it apply some other
transformation? or does it do floating point normalization/etc on the
ints as if they were floats?).
Instead, we default to the "clamp to integer" output modifier for
ops writing integers. Semantically, this makes sense (clamping an
integer to the nearest integer is the identity function). In the
hardware with an integer opcode, this is the actual "normal".
This fixes numerous sporadic and sometimes bizarre bugs relating to
integers, especially integer moves. With this in place, we no longer
care about the types involved; it's just bits on the wire again.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Tue, 14 May 2019 23:18:18 +0000 (23:18 +0000)]
panfrost: Set custom stride for textures when necessary
From Gallium (and our) perspective, the stride of a BO is arbitrary. For
internal buffers, we can make it something nice, but for imported linear
buffers (e.g. EGL clients), we don't always have that luxury. To cope,
we calculate the expected stride of a texture, compare it to the BO's
actual reported stride, and if they differ, set the latter as a custom
stride.
Fixes rendering of windows not on tile boundaries (noticeable in Weston
with es2gears_wayland, for instance). Also, this should fix stride
issues with bufer reloading.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Tue, 14 May 2019 22:42:47 +0000 (22:42 +0000)]
panfrost/decode: Stride decoding
With a special flag, texture descriptors can include custom stride(s).
We haven't seen a case of this used for mipmaps/cubemaps, so it's not
clear how that will be encoded, but this dumps correctly for single
one-level 2D textures.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig [Tue, 14 May 2019 22:21:39 +0000 (22:21 +0000)]
panfrost/decode: Futureproof texture dumping
One field was not dumped for some reason. It's observed to be 0, but
it's still good to have it available.
Also, extra fields might be snuck in the bitmaps array (it's
variable-lengthed at the end), and we want to guard against that
possibility, so we dump a little more.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Marek Olšák [Wed, 15 May 2019 02:16:20 +0000 (22:16 -0400)]
ac: rename SI-CIK-VI to GFX6-GFX7-GFX8
Acked-by: Dave Airlie <airlied@redhat.com>
We already use GFX9 and I don't want us to have confusing naming
in the driver. GFXn naming is better from the driver perspective,
because it's the real version of the gfx portion of the hw. Also,
CIK means Bonaire-Kaveri-Kabini, it doesn't mean CI.
It shouldn't confuse our SDMA, UVD, VCE etc. code much. Those have
nothing to do with GFXn and they have their own version numbers.
Marek Olšák [Wed, 15 May 2019 01:50:59 +0000 (21:50 -0400)]
ac: add comments to chip enums
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (except GFX2 changes)
Reviewed-by: Dave Airlie <airlied@redhat.com> (except <= GFX5 changes)
Anuj Phogat [Fri, 10 May 2019 20:22:31 +0000 (13:22 -0700)]
compiler: Add lowering support for 64-bit saturate operations to software
Fixes 7 Khronos GL CTS tests:
KHR-GL45.gpu_shader_fp64.builtin.smoothstep_dvec{double, 2, 3, 4}
KHR-GL45.gpu_shader_fp64.builtin.smoothstep_against_scalar_dvec{2, 3, 4}
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Wed, 15 May 2019 21:49:14 +0000 (14:49 -0700)]
st/dri: Minor style fixes
Trivial.
Chia-I Wu [Sat, 11 May 2019 04:23:12 +0000 (21:23 -0700)]
virgl: handle DONT_BLOCK and MAP_DIRECTLY
Handle PIPE_TRANSFER_DONT_BLOCK and PIPE_TRANSFER_MAP_DIRECTLY.
Make virgl_resource_transfer_prepare return an enum instead of a
bool for extensibility (e.g., instruct the callers to map
differently).
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Chia-I Wu [Thu, 9 May 2019 20:27:34 +0000 (13:27 -0700)]
virgl: add virgl_resource_transfer_prepare
virgl_resource_transfer_prepare should be called before mapping to
prepare the resource. It does flush, readback, and wait as needed.
virgl_res_needs_flush and virgl_res_needs_readback become internal
helpers to the new function.
There should be no externally visible change.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Chia-I Wu [Tue, 14 May 2019 17:14:03 +0000 (10:14 -0700)]
virgl: honor DISCARD_WHOLE_RESOURCE in virgl_res_needs_readback
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Chia-I Wu [Fri, 10 May 2019 03:40:41 +0000 (20:40 -0700)]
virgl: clean up virgl_res_needs_readback
Add comments and follow the coding style of virgl_res_needs_flush.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Lionel Landwerlin [Wed, 15 May 2019 18:09:36 +0000 (19:09 +0100)]
nir: fix lower_non_uniform_access pass
Obviously missing the instruction insertion into the SSA list.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes:
3bd545764151 ("nir: Add a lowering pass for non-uniform resource access")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Alex Villacís Lasso [Mon, 13 May 2019 01:34:28 +0000 (20:34 -0500)]
gbm: gbm_bo_get_handle_for_plane fallback to nonplanar handle
Commit
f9567ab435217a72cbae628336ead84dc0b2a803 (gbm: Export a getter for per
plane handles) contains an API version check that fails on i915 (API version 7
vs. check for minimum API version 13). Any client that migrates to the planar
API will start failing on i915 (see https://gitlab.gnome.org/GNOME/mutter/issues/127
for mutter, and https://bugs.freedesktop.org/show_bug.cgi?id=108487 for weston).
This commit adds a fallback for plane 0 when the API check fails and returns the
non-planar handle in this scenario, making the call equivalent to
gbm_bo_get_handle(). This is enough for weston 6.0.0 to start working again on an
i915 system.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=108487
Signed-off-by: Alex Villacís Lasso <a_villacis@palosanto.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Alyssa Rosenzweig [Wed, 15 May 2019 04:32:51 +0000 (04:32 +0000)]
gallium: Add default check for PIPE_CAP_FRAGMENT_SHADER_INTERLOCK
Fixes:
c704c0226 ("gallium: Add a PIPE_CAP_FRAGMENT_SHADER_INTERLOCK")
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Andrii Kryvytskyi [Mon, 13 May 2019 12:19:03 +0000 (15:19 +0300)]
iris: Check if resource has stencil before returning it
Signed-off-by: Andrii Kryvytskyi <andrii.o.kryvytskyi@globallogic.com>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jordan Justen [Fri, 10 May 2019 03:55:36 +0000 (20:55 -0700)]
i965/blorp: Set MOCS for gen11 in blorp_alloc_vertex_buffer
v2:
* Add build error for gen > 6 if MOCS is not set. (Lionel)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Kenneth Graunke [Sat, 11 May 2019 01:34:25 +0000 (18:34 -0700)]
iris: Enable fragment shader interlock on Gen9+.
There's some debate about whether we should support this on older
hardware as well. Currently i965 turns it off on Gen8- though, so
we follow suit. If this changes, we can update this as well.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Kenneth Graunke [Sat, 11 May 2019 01:32:46 +0000 (18:32 -0700)]
gallium: Add a PIPE_CAP_FRAGMENT_SHADER_INTERLOCK.
Corresponding to GL_ARB_fragment_shader_interlock and
GL_NV_fragment_shader_interlock. Currently, only the NIR paths
support this functionality, but someone could conceivably add it
to TGSI too.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Dave Airlie [Fri, 3 May 2019 00:17:54 +0000 (10:17 +1000)]
intel/compiler: use bitset instead of opencoding a 32-bit bitset. (v2)
In the future I want to expand this to 128-bits, for vec16 support, so
lets just put the code in place to use bitset ranges now.
v2: just declare the bitset to be the max of what we should ever see
and change assert to reflect it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Dave Airlie [Fri, 3 May 2019 00:15:07 +0000 (10:15 +1000)]
intel/compiler: remove repeated bit_size / 8 in brw mem lowering pass.
Just use a variable already.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Fri, 3 May 2019 21:57:54 +0000 (14:57 -0700)]
intel/compiler: Implement TCS 8_PATCH mode and INTEL_DEBUG=tcs8
Our tessellation control shaders can be dispatched in several modes.
- SINGLE_PATCH (Gen7+) processes a single patch per thread, with each
channel corresponding to a different patch vertex. PATCHLIST_N will
launch (N / 8) threads. If N is less than 8, some channels will be
disabled, leaving some untapped hardware capabilities. Conditionals
based on gl_InvocationID are non-uniform, which means that they'll
often have to execute both paths. However, if there are fewer than
8 vertices, all invocations will happen within a single thread, so
barriers can become no-ops, which is nice. We also burn a maximum
of 4 registers for ICP handles, so we can compile without regard for
the value of N. It also works in all cases.
- DUAL_PATCH mode processes up to two patches at a time, where the first
four channels come from patch 1, and the second group of four come
from patch 2. This tries to provide better EU utilization for small
patches (N <= 4). It cannot be used in all cases.
- 8_PATCH mode processes 8 patches at a time, with a thread launched per
vertex in the patch. Each channel corresponds to the same vertex, but
in each of the 8 patches. This utilizes all channels even for small
patches. It also makes conditions on gl_InvocationID uniform, leading
to proper jumps. Barriers, unfortunately, become real. Worse, for
PATCHLIST_N, the thread payload burns N registers for ICP handles.
This can burn up to 32 registers, or 1/4 of our register file, for
URB handles. For Vulkan (and DX), we know the number of vertices at
compile time, so we can limit the amount of waste. In GL, the patch
dimension is dynamic state, so we either would have to waste all 32
(not reasonable) or guess (badly) and recompile. This is unfortunate.
Because we can only spawn 16 thread instances, we can only use this
mode for PATCHLIST_16 and smaller. The rest must use SINGLE_PATCH.
This patch implements the new 8_PATCH TCS mode, but leaves us using
SINGLE_PATCH by default. A new INTEL_DEBUG=tcs8 flag will switch to
using 8_PATCH mode for testing and benchmarking purposes. We may
want to consider using 8_PATCH mode in Vulkan in some cases.
The data I've seen shows that 8_PATCH mode can be more efficient in
some cases, but SINGLE_PATCH mode (the one we use today) is faster
in other cases. Ultimately, the TES matters much more than the TCS
for performance, so the decision may not matter much.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Fri, 3 May 2019 21:37:11 +0000 (14:37 -0700)]
intel/compiler: Move ICP handle fetching into a helper function.
This will be significantly different in 8_PATCH mode.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Fri, 3 May 2019 21:28:51 +0000 (14:28 -0700)]
intel/compiler: Don't repeat dispatch max fixing condition
Having a single flag will keep both places in sync if the condition
gets more complicated.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Fri, 3 May 2019 21:24:49 +0000 (14:24 -0700)]
intel/compiler: Rename invocation_id_mask to instance_id_mask
The payload field is actually "instance" (thread number), which is used
to calculate the invocation ID.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Fri, 3 May 2019 21:20:00 +0000 (14:20 -0700)]
intel/compiler: Refactor TCS invocation ID setup into a helper
When we add 8_PATCH mode, this will get a bit more complex, so we may
as well start by putting it in a helper function.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke [Tue, 7 May 2019 01:24:08 +0000 (18:24 -0700)]
i965: Pass compiler to default key populators
This lets us get devinfo and other misc. compiler settings.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Marek Olšák [Fri, 10 May 2019 00:58:21 +0000 (20:58 -0400)]
ac: use 1D GEPs for descriptors and constants
just a cleanup
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Marek Olšák [Mon, 13 May 2019 21:03:58 +0000 (17:03 -0400)]
mesa: fix _mesa_max_texture_levels for GL_TEXTURE_EXTERNAL_OES
This helps fix:
piglit/bin/ext_image_dma_buf_import-sample_yuv -fmt=NV12 -auto
Fixes:
d88f3392fff7c6342f3840c4bd8195a1296c2372
Reviewed-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 13 May 2019 22:31:17 +0000 (15:31 -0700)]
freedreno: Restore msm_drm.h to a pristine "make headers_install" copy.
This diverged back in
f1374805a86d ("drm-uapi: use local files, not system
libdrm") to point at drm-uapi's copy, which we don't need now that we're
actually in drm-uapi.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Eric Anholt [Mon, 13 May 2019 22:21:06 +0000 (15:21 -0700)]
freedreno: Move msm_drm.h to the same spot as other DRM uapi.
The new location matches other drivers, and has a README about the rules
for updating it.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Ian Romanick [Wed, 28 Mar 2018 05:57:07 +0000 (22:57 -0700)]
nir/algebraic: Commute 1-fsat(a) to fsat(1-a) for all non-fmul instructions
The goal is to avoid having an extra MOV instruction to perform the
saturate. Doing the subtraction first allows the saturate to be applied
to the ADD instruction making the MOV unnecessary. Values generated in
different block and values from non-ALU instructions (e.g., texture
instructions) almost always need the extra MOV.
Multiply instructions are restricted because doing this rearrangement
can interfere with the generation of flrp and ffma instructions.
v2: Now that the final method has been selected, squash three commits
into one.
All Intel platforms has similar results. (Ice Lake shown)
total instructions in shared programs:
17223214 ->
17219386 (-0.02%)
instructions in affected programs: 1524376 -> 1520548 (-0.25%)
helped: 2686
HURT: 26
helped stats (abs) min: 1 max: 32 x̄: 1.44 x̃: 1
helped stats (rel) min: 0.03% max: 16.67% x̄: 0.54% x̃: 0.37%
HURT stats (abs) min: 1 max: 2 x̄: 1.69 x̃: 2
HURT stats (rel) min: 0.33% max: 1.67% x̄: 0.54% x̃: 0.35%
95% mean confidence interval for instructions value: -1.46 -1.36
95% mean confidence interval for instructions %-change: -0.56% -0.50%
Instructions are helped.
total cycles in shared programs:
360811571 ->
360791896 (<.01%)
cycles in affected programs:
103650214 ->
103630539 (-0.02%)
helped: 1557
HURT: 675
helped stats (abs) min: 1 max: 1773 x̄: 41.44 x̃: 16
helped stats (rel) min: <.01% max: 26.77% x̄: 1.37% x̃: 0.64%
HURT stats (abs) min: 1 max: 1513 x̄: 66.44 x̃: 14
HURT stats (rel) min: <.01% max: 46.16% x̄: 2.00% x̃: 0.49%
95% mean confidence interval for cycles value: -14.82 -2.81
95% mean confidence interval for cycles %-change: -0.50% -0.20%
Cycles are helped.
LOST: 2
GAINED: 0
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Ian Romanick [Tue, 5 Mar 2019 22:54:35 +0000 (14:54 -0800)]
nir/algebraic: Eliminate useless fsat() on operand of comparison w/value in (0, 1)
v2: Fix copy-and-paste bug in a cmp b vs b cmp a cases.
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs:
17224337 ->
17224269 (<.01%)
instructions in affected programs: 13578 -> 13510 (-0.50%)
helped: 68
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.31% max: 3.12% x̄: 0.84% x̃: 0.42%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -1.05% -0.63%
Instructions are helped.
total cycles in shared programs:
360826090 ->
360825137 (<.01%)
cycles in affected programs: 94867 -> 93914 (-1.00%)
helped: 58
HURT: 1
helped stats (abs) min: 2 max: 28 x̄: 17.74 x̃: 18
helped stats (rel) min: 0.08% max: 3.17% x̄: 1.39% x̃: 1.22%
HURT stats (abs) min: 76 max: 76 x̄: 76.00 x̃: 76
HURT stats (rel) min: 2.86% max: 2.86% x̄: 2.86% x̃: 2.86%
95% mean confidence interval for cycles value: -19.53 -12.78
95% mean confidence interval for cycles %-change: -1.56% -1.08%
Cycles are helped.
No changes on any other Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Ian Romanick [Wed, 6 Mar 2019 22:07:18 +0000 (14:07 -0800)]
nir/algebraic: Strip double negatives from comparison sources
All Intel platforms had similar results. (Ice Lake shown)
total instructions in shared programs:
17224623 ->
17224337 (<.01%)
instructions in affected programs: 32648 -> 32362 (-0.88%)
helped: 148
HURT: 0
helped stats (abs) min: 1 max: 2 x̄: 1.93 x̃: 2
helped stats (rel) min: 0.16% max: 2.74% x̄: 1.07% x̃: 1.08%
95% mean confidence interval for instructions value: -1.97 -1.89
95% mean confidence interval for instructions %-change: -1.15% -1.00%
Instructions are helped.
total cycles in shared programs:
360828714 ->
360826090 (<.01%)
cycles in affected programs: 347416 -> 344792 (-0.76%)
helped: 148
HURT: 26
helped stats (abs) min: 1 max: 426 x̄: 26.33 x̃: 18
helped stats (rel) min: 0.03% max: 15.10% x̄: 1.78% x̃: 1.41%
HURT stats (abs) min: 2 max: 337 x̄: 48.96 x̃: 6
HURT stats (rel) min: 0.04% max: 18.82% x̄: 2.15% x̃: 0.27%
95% mean confidence interval for cycles value: -23.78 -6.38
95% mean confidence interval for cycles %-change: -1.59% -0.79%
Cycles are helped.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Ian Romanick [Tue, 5 Mar 2019 20:08:29 +0000 (12:08 -0800)]
intel/compiler: Repeat nir_opt_algebraic_late
A tiny bit of help seems to come from nir_copy_prop. Future patches
will benefit from this change.
Doing more copy propagation on the vec4 backend led to a disaster in
hurt cycles.
v2: Fix typo in comment. Noticed by Matt.
All Gen8+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs:
17224634 ->
17224623 (<.01%)
instructions in affected programs: 4586 -> 4575 (-0.24%)
helped: 11
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.19% max: 0.53% x̄: 0.27% x̃: 0.23%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -0.36% -0.19%
Instructions are helped.
total cycles in shared programs:
360828542 ->
360828714 (<.01%)
cycles in affected programs: 151159 -> 151331 (0.11%)
helped: 49
HURT: 28
helped stats (abs) min: 1 max: 254 x̄: 26.41 x̃: 6
helped stats (rel) min: 0.06% max: 12.02% x̄: 1.34% x̃: 0.42%
HURT stats (abs) min: 1 max: 196 x̄: 52.36 x̃: 15
HURT stats (rel) min: 0.05% max: 10.74% x̄: 2.55% x̃: 0.88%
95% mean confidence interval for cycles value: -13.48 17.95
95% mean confidence interval for cycles %-change: -0.69% 0.84%
Inconclusive result (value mean confidence interval includes 0).
Haswell, Ivy Bridge, and Sandy Bridge had similar results. (Haswell shown)
total instructions in shared programs:
13529544 ->
13529542 (<.01%)
instructions in affected programs: 358 -> 356 (-0.56%)
helped: 2
HURT: 0
total cycles in shared programs:
357290311 ->
357289678 (<.01%)
cycles in affected programs: 178324 -> 177691 (-0.35%)
helped: 48
HURT: 40
helped stats (abs) min: 1 max: 201 x̄: 31.52 x̃: 13
helped stats (rel) min: 0.06% max: 10.92% x̄: 1.71% x̃: 0.66%
HURT stats (abs) min: 1 max: 224 x̄: 22.00 x̃: 6
HURT stats (rel) min: 0.05% max: 15.84% x̄: 1.29% x̃: 0.31%
95% mean confidence interval for cycles value: -18.28 3.89
95% mean confidence interval for cycles %-change: -1.01% 0.32%
Inconclusive result (value mean confidence interval includes 0).
Iron Lake and GM45 had similar results. (Iron Lake shown)
total instructions in shared programs: 8159110 -> 8158980 (<.01%)
instructions in affected programs: 22719 -> 22589 (-0.57%)
helped: 65
HURT: 0
helped stats (abs) min: 1 max: 3 x̄: 2.00 x̃: 2
helped stats (rel) min: 0.07% max: 1.05% x̄: 0.73% x̃: 0.74%
95% mean confidence interval for instructions value: -2.06 -1.94
95% mean confidence interval for instructions %-change: -0.78% -0.68%
Instructions are helped.
total cycles in shared programs:
188609448 ->
188609214 (<.01%)
cycles in affected programs: 1875852 -> 1875618 (-0.01%)
helped: 109
HURT: 104
helped stats (abs) min: 2 max: 46 x̄: 5.30 x̃: 4
helped stats (rel) min: 0.02% max: 0.90% x̄: 0.09% x̃: 0.07%
HURT stats (abs) min: 2 max: 20 x̄: 3.31 x̃: 2
HURT stats (rel) min: 0.01% max: 0.26% x̄: 0.04% x̃: 0.02%
95% mean confidence interval for cycles value: -1.95 -0.25
95% mean confidence interval for cycles %-change: -0.04% -0.01%
Cycles are helped.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Ian Romanick [Wed, 13 Mar 2019 22:49:43 +0000 (15:49 -0700)]
Revert "nir: add late opt to turn inot/b2f combos back to bcsel"
This reverts commit
7acc8652268205a266068ea4d059eccce43e1f78.
With these optimizations in place, the extra constant folding added in
the next commit extends some live ranges of 0.0 and ±1.0 constants, and
that causes several hundred shaders to have more spills and fills.
I believe this optimization we made basically irrelevant by
7725d609387
"intel/fs: Emit better code for b2f(inot(a)) and b2i(inot(a))".
All Gen7.5+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs:
17225303 ->
17224634 (<.01%)
instructions in affected programs: 879402 -> 878733 (-0.08%)
helped: 679
HURT: 1
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.03% max: 0.93% x̄: 0.24% x̃: 0.05%
HURT stats (abs) min: 10 max: 10 x̄: 10.00 x̃: 10
HURT stats (rel) min: 0.45% max: 0.45% x̄: 0.45% x̃: 0.45%
95% mean confidence interval for instructions value: -1.02 -0.95
95% mean confidence interval for instructions %-change: -0.26% -0.22%
Instructions are helped.
total cycles in shared programs:
360842595 ->
360828542 (<.01%)
cycles in affected programs:
110443594 ->
110429541 (-0.01%)
helped: 389
HURT: 265
helped stats (abs) min: 1 max: 7525 x̄: 162.81 x̃: 28
helped stats (rel) min: <.01% max: 18.66% x̄: 1.11% x̃: 0.11%
HURT stats (abs) min: 1 max: 7614 x̄: 185.96 x̃: 48
HURT stats (rel) min: <.01% max: 25.08% x̄: 0.95% x̃: 0.10%
95% mean confidence interval for cycles value: -75.65 32.67
95% mean confidence interval for cycles %-change: -0.49% -0.06%
Inconclusive result (value mean confidence interval includes 0).
total spills in shared programs: 12159 -> 12161 (0.02%)
spills in affected programs: 13 -> 15 (15.38%)
helped: 0
HURT: 1
total fills in shared programs: 25207 -> 25208 (<.01%)
fills in affected programs: 25 -> 26 (4.00%)
helped: 0
HURT: 1
Ivy Bridge
total instructions in shared programs:
12082019 ->
12082013 (<.01%)
instructions in affected programs: 1033 -> 1027 (-0.58%)
helped: 6
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.41% max: 0.83% x̄: 0.61% x̃: 0.59%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -0.78% -0.45%
Instructions are helped.
total cycles in shared programs:
179849270 ->
179849157 (<.01%)
cycles in affected programs: 4735 -> 4622 (-2.39%)
helped: 4
HURT: 0
helped stats (abs) min: 2 max: 74 x̄: 28.25 x̃: 18
helped stats (rel) min: 0.13% max: 6.53% x̄: 2.85% x̃: 2.36%
95% mean confidence interval for cycles value: -82.73 26.23
95% mean confidence interval for cycles %-change: -7.98% 2.28%
Inconclusive result (value mean confidence interval includes 0).
Sandy Bridge
total instructions in shared programs:
10882750 ->
10882748 (<.01%)
instructions in affected programs: 266 -> 264 (-0.75%)
helped: 2
HURT: 0
Iron Lake
total cycles in shared programs:
188609440 ->
188609448 (<.01%)
cycles in affected programs: 4320 -> 4328 (0.19%)
helped: 0
HURT: 2
GM45
total cycles in shared programs:
129016868 ->
129016872 (<.01%)
cycles in affected programs: 2302 -> 2306 (0.17%)
helped: 0
HURT: 1
Reviewed-by: Matt Turner <mattst88@gmail.com>
Ian Romanick [Thu, 25 Oct 2018 03:13:45 +0000 (20:13 -0700)]
nir/algebraic: Eliminate a tautological compare
The value-range tracking pass that is coming is not clever enough to
know that the result of the ffma must be non-negative. Making it that
smart will require quite a bit of work. It might be possible to add a
special case that detects that a whole tree of fadd(fmul(fsat(a),
fneg(fsat(a))), 1.0) cannot be negative.
For cases when the comparison is used in the domain guard for a
square-root (see nir/algebraic: Simplify fsqrt domain guard), the
compare may be converted to a fmax. This patch also handles that case.
All of the affected cases are in DiRT: Showdown.
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs:
17225365 ->
17225303 (<.01%)
instructions in affected programs: 40051 -> 39989 (-0.15%)
helped: 62
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.07% max: 0.66% x̄: 0.27% x̃: 0.26%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -0.31% -0.22%
Instructions are helped.
total cycles in shared programs:
360842788 ->
360842595 (<.01%)
cycles in affected programs: 1818081 -> 1817888 (-0.01%)
helped: 29
HURT: 22
helped stats (abs) min: 1 max: 206 x̄: 20.66 x̃: 14
helped stats (rel) min: <.01% max: 9.55% x̄: 0.87% x̃: 0.42%
HURT stats (abs) min: 1 max: 108 x̄: 18.45 x̃: 7
HURT stats (rel) min: <.01% max: 4.48% x̄: 0.56% x̃: 0.19%
95% mean confidence interval for cycles value: -14.48 6.91
95% mean confidence interval for cycles %-change: -0.71% 0.21%
Inconclusive result (value mean confidence interval includes 0).
No changes on any other Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Ian Romanick [Thu, 25 Oct 2018 02:48:49 +0000 (19:48 -0700)]
nir/algebraic: Simplify fsqrt domain guard
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs:
17228376 ->
17225365 (-0.02%)
instructions in affected programs: 280732 -> 277721 (-1.07%)
helped: 1072
HURT: 0
helped stats (abs) min: 1 max: 12 x̄: 2.81 x̃: 2
helped stats (rel) min: 0.16% max: 5.10% x̄: 1.43% x̃: 1.07%
95% mean confidence interval for instructions value: -2.92 -2.70
95% mean confidence interval for instructions %-change: -1.48% -1.37%
Instructions are helped.
total cycles in shared programs:
360935690 ->
360842788 (-0.03%)
cycles in affected programs: 7838017 -> 7745115 (-1.19%)
helped: 1569
HURT: 69
helped stats (abs) min: 1 max: 1198 x̄: 63.53 x̃: 20
helped stats (rel) min: 0.06% max: 26.17% x̄: 3.44% x̃: 2.12%
HURT stats (abs) min: 1 max: 2820 x̄: 98.22 x̃: 47
HURT stats (rel) min: 0.05% max: 16.67% x̄: 3.50% x̃: 2.31%
95% mean confidence interval for cycles value: -63.55 -49.89
95% mean confidence interval for cycles %-change: -3.33% -2.96%
Cycles are helped.
No changes on any other platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>