review.tizen.org Git - platform/kernel/linux-amlogic.git/log

ftrace: Avoid potential division by zero in function profiler

commit e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream.

The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.

Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: cs4236: fix error return comparison of an unsigned integer

commit d60229d84846a8399257006af9c5444599f64361 upstream.

The return from pnp_irq is an unsigned integer type resource_size_t
and hence the error check for a positive non-error code is always
going to be true. A check for a non-failure return from pnp_irq
should in fact be for (resource_size_t)-1 rather than >= 0.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: a9824c868a2c ("[ALSA] Add CS4232 PnP BIOS support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have the histogram compare functions convert to u64 first

commit 106f41f5a302cb1f36c7543fae6a05de12e96fa4 upstream.

The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.

To fix this, first derference the value as a u64 then convert it to the type
being compared.

Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map")
Acked-by: Tom Zanussi <zanussi@kernel.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: fix up emulated open drain outputs

commit 256efaea1fdc4e38970489197409a26125ee0aaa upstream.

gpiolib has a corner case with open drain outputs that are emulated.
When such outputs are outputting a logic 1, emulation will set the
hardware to input mode, which will cause gpiod_get_direction() to
report that it is in input mode. This is different from the behaviour
with a true open-drain output.

Unify the semantics here.

Cc: <stable@vger.kernel.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Fix AHCI resources management

commit c0cdf2ac4b5bf3e5ef2451ea29fb4104278cdabc upstream.

The AHCI resources management within ahci_brcm.c is a little
convoluted, largely because it historically had a dedicated clock that
was managed within this file in the downstream tree. Once brough
upstream though, the clock was left to be managed by libahci_platform.c
which is entirely appropriate.

This patch series ensures that the AHCI resources are fetched and
enabled before any register access is done, thus avoiding bus errors on
platforms which clock gate the controller by default.

As a result we need to re-arrange the suspend() and resume() functions
in order to avoid accessing registers after the clocks have been turned
off respectively before the clocks have been turned on. Finally, we can
refactor brcm_ahci_get_portmask() in order to fetch the number of ports
from hpriv->mmio which is now accessible without jumping through hoops
like we used to do.

The commit pointed in the Fixes tag is both old and new enough not to
require major headaches for backporting of this patch.

Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_brcm: Allow optional reset controller to be used

commit 2b2c47d9e1fe90311b725125d6252a859ee87a79 upstream.

On BCM63138, we need to reset the AHCI core prior to start utilizing it,
grab the reset controller device cookie and do that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()

commit 84b032dbfdf1c139cd2b864e43959510646975f8 upstream.

This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5
("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are
going to need ahci_platform_{enable,disable}_phys() in a subsequent
commit for ahci_brcm.c in order to properly control the PHY
initialization order.

Also make sure the function prototypes are declared in
include/linux/ahci_platform.h as a result.

Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: block: handle Persistent Reservations

commit b2c0fcd28772f99236d261509bcd242135677965 upstream.

These were added to blkdev_ioctl() in linux-5.5 but not
blkdev_compat_ioctl, so add them now.

Cc: <stable@vger.kernel.org> # v4.4+
Fixes: bbd3e064362e ("block: add an API for Persistent Reservations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fold in followup patch from Arnd with missing pr.h header include.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

dmaengine: Fix access to uninitialized dma_slave_caps

commit 53a256a9b925b47c7e67fc1f16ca41561a7b877c upstream.

dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the
stack, populates it using dma_get_slave_caps() and then accesses one
of its members.

However dma_get_slave_caps() may fail and this isn't accounted for,
leading to a legitimate warning of gcc-4.9 (but not newer versions):

   In file included from drivers/spi/spi-bcm2835.c:19:0:
   drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse':
>> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized]
     if (caps.descriptor_reuse) {

Fix it, thereby also silencing the gcc-4.9 warning.

The issue has been present for 4 years but surfaces only now that
the first caller of dmaengine_desc_set_reuse() has been added in
spi-bcm2835.c. Another user of reusable DMA descriptors has existed
for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag
directly instead of calling dmaengine_desc_set_reuse(). Nevertheless,
tag this commit for stable in case there are out-of-tree users.

Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.3+
Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locks: print unsigned ino in /proc/locks

commit 98ca480a8f22fdbd768e3dad07024c8d4856576c upstream.

An ino is unsigned, so display it as such in /proc/locks.

Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: account security cred as well to kmemcg

commit 84029fd04c201a4c7e0b07ba262664900f47c6f5 upstream.

The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not.  Account cred->security to kmemcg.

Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes.  Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period.  This
overhead can adversely impact the isolation on the system.

One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.

Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: fix the migrated zspage statistics.

commit ac8f05da5174c560de122c499ce5dfb5d0dfbee5 upstream.

When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.

Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes: 91537fee0013 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Avoid VDSO ABI breakage due to global register variable

commit bbcc5672b0063b0e9d65dc8787a4f09c3b5bb5cc upstream.

Declaring __current_thread_info as a global register variable has the
effect of preventing GCC from saving & restoring its value in cases
where the ABI would typically do so.

To quote GCC documentation:

> If the register is a call-saved register, call ABI is affected: the
> register will not be restored in function epilogue sequences after the
> variable has been assigned. Therefore, functions cannot safely return
> to callers that assume standard ABI.

When our position independent VDSO is built for the n32 or n64 ABIs all
functions it exposes should be preserving the value of $gp/$28 for their
caller, but in the presence of the __current_thread_info global register
variable GCC stops doing so & simply clobbers $gp/$28 when calculating
the address of the GOT.

In cases where the VDSO returns success this problem will typically be
masked by the caller in libc returning & restoring $gp/$28 itself, but
that is by no means guaranteed. In cases where the VDSO returns an error
libc will typically contain a fallback path which will now fail
(typically with a bad memory access) if it attempts anything which
relies upon the value of $gp/$28 - eg. accessing anything via the GOT.

One fix for this would be to move the declaration of
__current_thread_info inside the current_thread_info() function,
demoting it from global register variable to local register variable &
avoiding inadvertently creating a non-standard calling ABI for the VDSO.
Unfortunately this causes issues for clang, which doesn't support local
register variables as pointed out by commit fe92da0f355e ("MIPS: Changed
current_thread_info() to an equivalent supported by both clang and GCC")
which introduced the global register variable before we had a VDSO to
worry about.

Instead, fix this by continuing to use the global register variable for
the kernel proper but declare __current_thread_info as a simple extern
variable when building the VDSO. It should never be referenced, and will
cause a link error if it is. This resolves the calling convention issue
for the VDSO without having any impact upon the build of the kernel
itself for either clang or gcc.

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code

commit 0aec96f5897ac16ad9945f531b4bef9a2edd2ebd upstream.

Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724
driver with Infrasonic Quartet support code: namely, ice->set_rate
callback gets called inside ice->reg_lock spinlock, while the callback
in quartet.c holds ice->gpio_mutex.

This patch fixes the invalid call: it simply moves the calls of
ice->set_rate and ice->set_mclk callbacks outside the spinlock.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com
Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "perf report: Add warning when libunwind not compiled in"

This reverts commit 59b706ce44dbfd35a428f2cbad47794ce5dce1eb.

This change depends on more changes that didn't exist in 4.9 and older.

Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: limit to INT_MAX in create_blob ioctl

[ Upstream commit 5bf8bec3f4ce044a223c40cbce92590d938f0e9c ]

The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb
("uaccess: disallow > INT_MAX copy sizes")

Code itself should have been fine as-is.

Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com
Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes")
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

taskstats: fix data-race

[ Upstream commit 0b8d616fb5a8ffa307b1d3af37f55c15dae14f28 ]

When assiging and testing taskstats in taskstats_exit() there's a race
when setting up and reading sig->stats when a thread-group with more
than one thread exits:

write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0:
taskstats_tgid_alloc kernel/taskstats.c:567 [inline]
taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596
do_exit+0x2c2/0x18e0 kernel/exit.c:864
do_group_exit+0xb4/0x1c0 kernel/exit.c:983
get_signal+0x2a2/0x1320 kernel/signal.c:2734
do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815
exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299
entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1:
taskstats_tgid_alloc kernel/taskstats.c:559 [inline]
taskstats_exit+0xb2/0x717 kernel/taskstats.c:596
do_exit+0x2c2/0x18e0 kernel/exit.c:864
do_group_exit+0xb4/0x1c0 kernel/exit.c:983
__do_sys_exit_group kernel/exit.c:994 [inline]
__se_sys_exit_group kernel/exit.c:992 [inline]
__x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992
do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by using smp_load_acquire() and smp_store_release().

Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com
Fixes: 34ec12349c8a ("taskstats: cleanup ->signal->stats allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Will Deacon <will@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix mount failure crash on invalid iclog memory access

[ Upstream commit 798a9cada4694ca8d970259f216cec47e675bfd5 ]

syzbot (via KASAN) reports a use-after-free in the error path of
xlog_alloc_log(). Specifically, the iclog freeing loop doesn't
handle the case of a fully initialized ->l_iclog linked list.
Instead, it assumes that the list is partially constructed and NULL
terminated.

This bug manifested because there was no possible error scenario
after iclog list setup when the original code was added. Subsequent
code and associated error conditions were added some time later,
while the original error handling code was never updated. Fix up the
error loop to terminate either on a NULL iclog or reaching the end
of the list.

Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / hibernate: memory_bm_find_bit(): Tighten node optimisation

[ Upstream commit da6043fe85eb5ec621e34a92540735dcebbea134 ]

When looking for a bit by number we make use of the cached result from the
preceding lookup to speed up operation.  Firstly we check if the requested
pfn is within the cached zone and if not lookup the new zone.  We then
check if the offset for that pfn falls within the existing cached node.
This happens regardless of whether the node is within the zone we are
now scanning.  With certain memory layouts it is possible for this to
false trigger creating a temporary alias for the pfn to a different bit.
This leads the hibernation code to free memory which it was never allocated
with the expected fallout.

Ensure the zone we are scanning matches the cached zone before considering
the cached node.

Deep thanks go to Andrea for many, many, many hours of hacking and testing
that went into cornering this bug.

Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/balloon: fix ballooned page accounting without hotplug enabled

[ Upstream commit c673ec61ade89bf2f417960f986bc25671762efb ]

When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined
reserve_additional_memory() will set balloon_stats.target_pages to a
wrong value in case there are still some ballooned pages allocated via
alloc_xenballooned_pages().

This will result in balloon_process() no longer be triggered when
ballooned pages are freed in batches.

Reported-by: Nicholas Tsirakis <niko.tsirakis@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-blkback: prevent premature module unload

[ Upstream commit fa2ac657f9783f0891b2935490afe9a7fd29d3fa ]

Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem
cache. This cache is destoyed when xen-blkif is unloaded so it is
necessary to wait for the deferred free routine used for such objects to
complete. This necessity was missed in commit 14855954f636 "xen-blkback:
allow module to be cleanly unloaded". This patch fixes the problem by
taking/releasing extra module references in xen_blkif_alloc/free()
respectively.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Follow mirror sequence of device add during device removal

[ Upstream commit 89f988d93c62384758b19323c886db917a80c371 ]

Current code device add sequence is:

ib_register_device()
ib_mad_init()
init_sriov_init()
register_netdev_notifier()

Therefore, the remove sequence should be,

unregister_netdev_notifier()
close_sriov()
mad_cleanup()
ib_unregister_device()

However it is not above.
Hence, make do above remove sequence.

Fixes: fa417f7b520ee ("IB/mlx4: Add support for IBoE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Avoid SBD overflow condition in irq handler

[ Upstream commit 0539ad0b22877225095d8adef0c376f52cc23834 ]

The s390 CPU Measurement sampling facility has an overflow condition
which fires when all entries in a SBD are used.
The measurement alert interrupt is triggered and reads out all samples
in this SDB. It then tests the successor SDB, if this SBD is not full,
the interrupt handler does not read any samples at all from this SDB
The design waits for the hardware to fill this SBD and then trigger
another meassurement alert interrupt.

This scheme works nicely until
an perf_event_overflow() function call discards the sample due to
a too high sampling rate.
The interrupt handler has logic to read out a partially filled SDB
when the perf event overflow condition in linux common code is met.
This causes the CPUM sampling measurement hardware and the PMU
device driver to operate on the same SBD's trailer entry.
This should not happen.

This can be seen here using this trace:
   cpumsf_pmu_add: tear:0xb5286000
   hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0
   hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
        above shows 1. interrupt
   hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0
   hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
        above shows 2. interrupt
... this goes on fine until...
   hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0
   perf_push_sample1: overflow
      one or more samples read from the IRQ handler are rejected by
      perf_event_overflow() and the IRQ handler advances to the next SDB
      and modifies the trailer entry of a partially filled SDB.
   hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1
      timestamp: 14:32:52.519953

Next time the IRQ handler is called for this SDB the trailer entry shows
an overflow count of 19 missed entries.
   hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1
      timestamp: 14:32:52.970058

Remove access to a follow on SDB when event overflow happened.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits

[ Upstream commit 39d4a501a9ef55c57b51e3ef07fc2aeed7f30b3b ]

Function perf_event_ever_overflow() and perf_event_account_interrupt()
are called every time samples are processed by the interrupt handler.
However function perf_event_account_interrupt() has checks to avoid being
flooded with interrupts (more then 1000 samples are received per
task_tick).  Samples are then dropped and a PERF_RECORD_THROTTLED is
added to the perf data. The perf subsystem limit calculation is:

    maximum sample frequency := 100000 --> 1 samples per 10 us
    task_tick = 10ms = 10000us --> 1000 samples per task_tick

The work flow is

measurement_alert() uses SDBT head and each SBDT points to 511
SDB pages, each with 126 sample entries. After processing 8 SBDs
and for each valid sample calling:

     perf_event_overflow()
       perf_event_account_interrupts()

there is a considerable amount of samples being dropped, especially when
the sample frequency is very high and near the 100000 limit.

To avoid the high amount of samples being dropped near the end of a
task_tick time frame, increment the sampling interval in case of
dropped events. The CPU Measurement sampling facility on the s390
supports only intervals, specifiing how many CPU cycles have to be
executed before a sample is generated. Increase the interval when the
samples being generated hit the task_tick limit.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: raid1: check rdev before reference in raid1_sync_request func

[ Upstream commit 028288df635f5a9addd48ac4677b720192747944 ]

In raid1_sync_request func, rdev should be checked before reference.

Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: fix wrong endpoint desc

[ Upstream commit e5b5da96da50ef30abb39cb9f694e99366404d24 ]

Gadget driver should always use config_ep_by_speed() to initialize
usb_ep struct according to usb device's operating speed. Otherwise,
usb_ep struct may be wrong if usb devcie's operating speed is changed.

The key point in this patch is that we want to make sure the desc pointer
in usb_ep struct will be set to NULL when gadget is disconnected.
This will force it to call config_ep_by_speed() to correctly initialize
usb_ep struct based on the new operating speed when gadget is
re-connected later.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: stop discovering if oob mode is disconnected

[ Upstream commit f70267f379b5e5e11bdc5d72a56bf17e5feed01f ]

The discovering of sas port is driven by workqueue in libsas. When libsas
is processing port events or phy events in workqueue, new events may rise
up and change the state of some structures such as asd_sas_phy.  This may
cause some problems such as follows:

==>thread 1                       ==>thread 2

                                  ==>phy up
                                  ==>phy_up_v3_hw()
                                    ==>oob_mode = SATA_OOB_MODE;
                                  ==>phy down quickly
                                  ==>hisi_sas_phy_down()
                                    ==>sas_ha->notify_phy_event()
                                    ==>sas_phy_disconnected()
                                      ==>oob_mode = OOB_NOT_CONNECTED
==>workqueue wakeup
==>sas_form_port()
  ==>sas_discover_domain()
    ==>sas_get_port_device()
      ==>oob_mode is OOB_NOT_CONNECTED and device
         is wrongly taken as expander

This at last lead to the panic when libsas trying to issue a command to
discover the device.

[183047.614035] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000058
[183047.622896] Mem abort info:
[183047.625762]   ESR = 0x96000004
[183047.628893]   Exception class = DABT (current EL), IL = 32 bits
[183047.634888]   SET = 0, FnV = 0
[183047.638015]   EA = 0, S1PTW = 0
[183047.641232] Data abort info:
[183047.644189]   ISV = 0, ISS = 0x00000004
[183047.648100]   CM = 0, WnR = 0
[183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000b7df67be
[183047.657834] [0000000000000058] pgd=0000000000000000
[183047.662789] Internal error: Oops: 96000004 [#1] SMP
[183047.667740] Process kworker/u16:2 (pid: 31291, stack limit =
0x00000000417c4974)
[183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G
W  OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1
[183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10,
BIOS 0.15 10/22/2019
[183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO)
[183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw]
[183047.717153] sp : ffff00000f28ba60
[183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228
[183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200
[183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0
[183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228
[183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200
[183047.747464] x19: 0000000000f80800 x18: 0000000000000010
[183047.752848] x17: 0000000000000000 x16: 0000000000000000
[183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005
[183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20
[183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870
[183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0
[183047.779770] x7 : 0000000000000000 x6 : 000000000000003f
[183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0
[183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007
[183047.795922] x1 : 0000000000000008 x0 : 0000000000000000
[183047.801307] Call trace:
[183047.803827]  prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.809127]  hisi_sas_task_prep+0x750/0x888 [hisi_sas_main]
[183047.814773]  hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main]
[183047.820939]  hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
[183047.826757]  smp_execute_task_sg+0xec/0x218
[183047.831013]  smp_execute_task+0x74/0xa0
[183047.834921]  sas_discover_expander.part.7+0x9c/0x5f8
[183047.839959]  sas_discover_root_expander+0x90/0x160
[183047.844822]  sas_discover_domain+0x1b8/0x1e8
[183047.849164]  process_one_work+0x1b4/0x3f8
[183047.853246]  worker_thread+0x54/0x470
[183047.856981]  kthread+0x134/0x138
[183047.860283]  ret_from_fork+0x10/0x18
[183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800)
[183047.870097] kernel fault(0x1) notification starting on CPU 0
[183047.875828] kernel fault(0x1) notification finished on CPU 0
[183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE)
hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE)
[183047.892418] ---[ end trace 4cc26083fc11b783  ]---
[183047.897107] Kernel panic - not syncing: Fatal exception
[183047.902403] kernel fault(0x5) notification starting on CPU 0
[183047.908134] kernel fault(0x5) notification finished on CPU 0
[183047.913865] SMP: stopping secondary CPUs
[183047.917861] Kernel Offset: disabled
[183047.921422] CPU features: 0x2,a2a00a38
[183047.925243] Memory Limit: none
[183047.928372] kernel reboot(0x2) notification starting on CPU 0
[183047.934190] kernel reboot(0x2) notification finished on CPU 0
[183047.940008] ---[ end Kernel panic - not syncing: Fatal exception
]---

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.com
Reported-by: Gao Chuan <gaochuan4@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: qla4xxx: fix double free in probe

[ Upstream commit fee92f25777789d73e1936b91472e9c4644457c8 ]

On this error path we call qla4xxx_mem_free() and then the caller also
calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a
couple double frees:

drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed

Fixes: afaf5a2d341d ("[SCSI] Initial Commit of qla4xxx")
Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Don't call qlt_async_event twice

[ Upstream commit 2c2f4bed9b6299e6430a65a29b5d27b8763fdf25 ]

MBA_PORT_UPDATE generates duplicate log lines in target mode because
qlt_async_event is called twice. Drop the calls within the case as the
function will be called right after the switch statement.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func

[ Upstream commit 9a1b0b9a6dab452fb0e39fe96880c4faf3878369 ]

When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf,
dd_data should be freed before return SLI_CONFIG_HANDLED.

When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in
job_error tag.

Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.com
Signed-off-by: Bo Wu <wubo40@huawei.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: add missed unregister_pernet_subsys in init failure

[ Upstream commit 44a7b6759000ac51b92715579a7bba9e3f9245c2 ]

The driver forgets to call unregister_pernet_subsys() in the error path
of cma_init().
Add the missed call to fix it.

Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Don't fail devfreq_dev_release if not in list

[ Upstream commit 42a6b25e67df6ee6675e8d1eaf18065bd73328ba ]

Right now devfreq_dev_release will print a warning and abort the rest of
the cleanup if the devfreq instance is not part of the global
devfreq_list. But this is a valid scenario, for example it can happen if
the governor can't be found or on any other init error that happens
after device_register.

Initialize devfreq->node to an empty list head in devfreq_add_device so
that list_del becomes a safe noop inside devfreq_dev_release and we can
continue the rest of the cleanup.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.208

gtp: avoid zero size hashtable

[ Upstream commit 6a902c0f31993ab02e1b6ea7085002b9c9083b6a ]

GTP default hashtable size is 1024 and userspace could set specific
hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0
from userspace, hashtable will not work and panic will occur.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: fix wrong condition in gtp_genl_dump_pdp()

[ Upstream commit 94a6d9fb88df43f92d943c32b84ce398d50bf49f ]

gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used
to dump pdp contexts. it would be re-executed because of dump packet size.

If dump packet size is too big, it saves current dump pointer
(gtp interface pointer, bucket, TID value) then it restarts dump from
last pointer.
Current GTP code allows adding zero TID pdp context but dump code
ignores zero TID value. So, last dump pointer will not be found.

In addition, this patch adds missing rcu_read_lock() in
gtp_genl_dump_pdp().

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not send empty skb from tcp_write_xmit()

[ Upstream commit 1f85e6267caca44b30c54711652b0726fadbb131 ]

Backport of commit fdfc5c8594c2 ("tcp: remove empty skb from
write queue in error cases") in linux-4.14 stable triggered
various bugs. One of them has been fixed in commit ba2ddb43f270
("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but
we still have crashes in some occasions.

Root-cause is that when tcp_sendmsg() has allocated a fresh
skb and could not append a fragment before being blocked
in sk_stream_wait_memory(), tcp_write_xmit() might be called
and decide to send this fresh and empty skb.

Sending an empty packet is not only silly, it might have caused
many issues we had in the past with tp->packets_out being
out of sync.

Fixes: c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Paasch <cpaasch@apple.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp/dccp: fix possible race __inet_lookup_established()

commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream.

Michal Kubecek and Firo Yang did a very nice analysis of crashes
happening in __inet_lookup_established().

Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN
(via a close()/socket()/listen() cycle) without a RCU grace period,
I should not have changed listeners linkage in their hash table.

They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt),
so that a lookup can detect a socket in a hash list was moved in
another one.

Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve
merge conflict for v4/v6 ordering fix"), we have to add
hlist_nulls_add_tail_rcu() helper.

Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[stable-4.9: we also need to update code in __inet_lookup_listener() and
inet6_lookup_listener() which has been removed in 5.0-rc1.]
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost/vsock: accept only packets with the right dst_cid

[ Upstream commit 8a3cc29c316c17de590e3ff8b59f3d6cbfd37b0a ]

When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.

The host should accept only packets where dst_cid is
equal to the host CID.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ena: fix napi handler misbehavior when the napi budget is zero

[ Upstream commit 24dee0c7478d1a1e00abdf5625b7f921467325dc ]

In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.

The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.

In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Update the tuning failed messages to pr_debug level

Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.

Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: baytrail: Really serialize all register accesses

[ Upstream commit 40ecab551232972a39cdd8b6f17ede54a3fdb296 ]

Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
added a spinlock around all register accesses because:

"There is a hardware issue in Intel Baytrail where concurrent GPIO register
access might result reads of 0xffffffff and writes might get dropped
completely."

Testing has shown that this does not catch all cases, there are still
2 problems remaining

1) The original fix uses a spinlock per byt_gpio device / struct,
additional testing has shown that this is not sufficient concurent
accesses to 2 different GPIO banks also suffer from the same problem.

This commit fixes this by moving to a single global lock.

2) The original fix did not add a lock around the register accesses in
the suspend/resume handling.

Since pinctrl-baytrail.c is using normal suspend/resume handlers,
interrupts are still enabled during suspend/resume handling. Nothing
should be using the GPIOs when they are being taken down, _but_ the
GPIOs themselves may still cause interrupts, which are likely to
use (read) the triggering GPIO. So we need to protect against
concurrent GPIO register accesses in the suspend/resume handlers too.

This commit fixes this by adding the missing spin_lock / unlock calls.

The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
confused after a suspend resume. The DSDT for this device has a bug
in its _LID method which reprograms the home and power button trigger-
flags requesting both high and low _level_ interrupts so the IRQs for
these 2 GPIOs continuously fire. This combined with the saving of
registers during suspend, triggers concurrent GPIO register accesses
resulting in saving 0xffffffff as pconf0 value during suspend and then
when restoring this on resume the pinmux settings get all messed up,
resulting in various I2C busses being stuck, the wifi no longer working
and often the tablet simply not coming out of suspend at all.

Cc: stable@vger.kernel.org
Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty/serial: atmel: fix out of range clock divider handling

[ Upstream commit cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 ]

Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode
register was already written thus the clock selection is ignored.

Fix by doing the baud rate calulation before setting the mode.

Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support")
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hrtimer: Annotate lockless access to timer->state

commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream.

syzbot reported various data-race caused by hrtimer_is_queued() reading
timer->state. A READ_ONCE() is required there to silence the warning.

Also add the corresponding WRITE_ONCE() when timer->state is set.

In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid
loading timer->state twice.

KCSAN reported these cases:

BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check

write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0:
__remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
__run_hrtimer kernel/time/hrtimer.c:1496 [inline]
__hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
__do_softirq+0x115/0x33f kernel/softirq.c:292
run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1:
tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline]
tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225
tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044
tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558
tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717
tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
sk_backlog_rcv include/net/sock.h:945 [inline]
__release_sock+0x135/0x1e0 net/core/sock.c:2435
release_sock+0x61/0x160 net/core/sock.c:2951
sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0x9f/0xc0 net/socket.c:657

BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check

write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0:
__remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
__run_hrtimer kernel/time/hrtimer.c:1496 [inline]
__hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830

read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1:
__tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265
tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline]
tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
sk_backlog_rcv include/net/sock.h:945 [inline]
__release_sock+0x135/0x1e0 net/core/sock.c:2435
release_sock+0x61/0x160 net/core/sock.c:2951
sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0x9f/0xc0 net/socket.c:657
__sys_sendto+0x21f/0x320 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto net/socket.c:1960 [inline]
__x64_sys_sendto+0x89/0xb0 net/socket.c:1960
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

[ tglx: Added comments ]

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191106174804.74723-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: icmp: fix data-race in cmp_global_allow()

commit bbab7ef235031f6733b5429ae7877bfa22339712 upstream.

This code reads two global variables without protection
of a lock. We need READ_ONCE()/WRITE_ONCE() pairs to
avoid load/store-tearing and better document the intent.

KCSAN reported :
BUG: KCSAN: data-race in icmp_global_allow / icmp_global_allow

read to 0xffffffff861a8014 of 4 bytes by task 11201 on cpu 0:
icmp_global_allow+0x36/0x1b0 net/ipv4/icmp.c:254
icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
dst_link_failure include/net/dst.h:419 [inline]
vti_xmit net/ipv4/ip_vti.c:243 [inline]
vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
__netdev_start_xmit include/linux/netdevice.h:4420 [inline]
netdev_start_xmit include/linux/netdevice.h:4434 [inline]
xmit_one net/core/dev.c:3280 [inline]
dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
__dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
__ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
__ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
dst_output include/net/dst.h:436 [inline]
ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179

write to 0xffffffff861a8014 of 4 bytes by task 11183 on cpu 1:
icmp_global_allow+0x174/0x1b0 net/ipv4/icmp.c:272
icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
dst_link_failure include/net/dst.h:419 [inline]
vti_xmit net/ipv4/ip_vti.c:243 [inline]
vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
__netdev_start_xmit include/linux/netdevice.h:4420 [inline]
netdev_start_xmit include/linux/netdevice.h:4434 [inline]
xmit_one net/core/dev.c:3280 [inline]
dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
__dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
__ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
__ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()

commit 5604285839aaedfb23ebe297799c6e558939334d upstream.

syzbot is kind enough to remind us we need to call skb_may_pull()

BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
nf_hook include/linux/netfilter.h:260 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
__br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
__netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
__netif_receive_skb_one_core net/core/dev.c:4927 [inline]
__netif_receive_skb net/core/dev.c:5043 [inline]
process_backlog+0x610/0x13c0 net/core/dev.c:5874
napi_poll net/core/dev.c:6311 [inline]
net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
__do_softirq+0x4a1/0x83a kernel/softirq.c:293
do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
</IRQ>
do_softirq kernel/softirq.c:338 [inline]
__local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
__dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
packet_snd net/packet/af_packet.c:2959 [inline]
packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
__sys_sendto+0xc44/0xc70 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1960
__x64_sys_sendto+0x6e/0x90 net/socket.c:1960
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
slab_alloc_node mm/slub.c:2773 [inline]
__kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x306/0xa10 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
packet_alloc_skb net/packet/af_packet.c:2807 [inline]
packet_snd net/packet/af_packet.c:2902 [inline]
packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
__sys_sendto+0xc44/0xc70 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1960
__x64_sys_sendto+0x6e/0x90 net/socket.c:1960
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6pack,mkiss: fix possible deadlock

commit 5c9934b6767b16ba60be22ec3cbd4379ad64170d upstream.

We got another syzbot report [1] that tells us we must use
write_lock_irq()/write_unlock_irq() to avoid possible deadlock.

[1]

WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
{HARDIRQ-ON-W} state was registered at:
  lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
  _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
  sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
  tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
  tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
  tiocsetd drivers/tty/tty_io.c:2337 [inline]
  tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
  vfs_ioctl fs/ioctl.c:47 [inline]
  file_ioctl fs/ioctl.c:545 [inline]
  do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
  ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
  __do_sys_ioctl fs/ioctl.c:756 [inline]
  __se_sys_ioctl fs/ioctl.c:754 [inline]
  __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
  do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(disc_data_lock);
  <Interrupt>
    lock(disc_data_lock);

*** DEADLOCK ***

5 locks held by syz-executor826/9605:
#0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
#1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116
#3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823
#4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288

stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
valid_state kernel/locking/lockdep.c:3112 [inline]
mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
mark_usage kernel/locking/lockdep.c:3554 [inline]
__lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
_raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
__handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
</IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7
RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899
R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138
R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000
mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
__mutex_lock_common kernel/locking/mutex.c:962 [inline]
__mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
__fput+0x2ff/0x890 fs/file_table.c:280
____fput+0x16/0x20 fs/file_table.c:313
task_work_run+0x145/0x1c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x8e7/0x2ef0 kernel/exit.c:797
do_group_exit+0x135/0x360 kernel/exit.c:895
__do_sys_exit_group kernel/exit.c:906 [inline]
__se_sys_exit_group kernel/exit.c:904 [inline]
__x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8
RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0
R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001
R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000

Fixes: 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ebtables: compat: reject all padding in matches/watchers

commit e608f631f0ba5f1fc5ee2e260a3a35d13107cbfe upstream.

syzbot reported following splat:

BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
Read of size 4 at addr ffffc900004461f4 by task syz-executor267/7937

CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0
size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249
compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333
[..]

Because padding isn't considered during computation of ->buf_user_offset,
"total" is decremented by fewer bytes than it should.

Therefore, the first part of

if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry))

will pass, -- it should not have. This causes oob access:
entry->next_offset is past the vmalloced size.

Reject padding and check that computed user offset (sum of ebt_entry
structure plus all individual matches/watchers/targets) is same
value that userspace gave us as the offset of the next entry.

Reported-by: syzbot+f68108fed972453a0ad4@syzkaller.appspotmail.com
Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

filldir[64]: remove WARN_ON_ONCE() for bad directory entries

commit b9959c7a347d6adbb558fba7e36e9fef3cba3b07 upstream.

This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.

The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected. So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.

Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com
Fixes: 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Siddharth Chandrasekaran <csiddharth@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make filldir[64]() verify the directory entry filename is valid

commit 8a23eb804ca4f2be909e372cf5a9e7b30ae476cd upstream.

This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption.  It's really more
"protect user space from bad behavior" as pointed out by Jann.  But
since Eric Biederman looked up the POSIX wording, here it is for context:

"From readdir:

   The readdir() function shall return a pointer to a structure
   representing the directory entry at the current position in the
   directory stream specified by the argument dirp, and position the
   directory stream at the next entry. It shall return a null pointer
   upon reaching the end of the directory stream. The structure dirent
   defined in the <dirent.h> header describes a directory entry.

  From definitions:

   3.129 Directory Entry (or Link)

   An object that associates a filename with a file. Several directory
   entries can associate names with the same file.

  ...

   3.169 Filename

   A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
   characters composing the name may be selected from the set of all
   character values excluding the slash character and the null byte. The
   filenames dot and dot-dot have special meaning. A filename is
   sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.

Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Siddharth Chandrasekaran <csiddharth@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf strbuf: Remove redundant va_end() in strbuf_addv()

commit 099be748865eece21362aee416c350c0b1ae34df upstream.

Each call to va_copy() should have one, and only one, corresponding call
to va_end(). In strbuf_addv() some code paths result in va_end() getting
called multiple times. Remove the superfluous va_end().

Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sanskriti Sharma <sansharm@redhat.com>
Link: http://lkml.kernel.org/r/20181229141750.16945-1-2pi@mok.nu
Fixes: ce49d8436cff ("perf strbuf: Match va_{add,copy} with va_end")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Downgrade error message for single-cmd fallback

[ Upstream commit 475feec0c41ad71cb7d02f0310e56256606b57c5 ]

We made the error message for the CORB/RIRB communication clearer by
upgrading to dev_WARN() so that user can notice better. But this
struck us like a boomerang: now it caught syzbot and reported back as
a fatal issue although it's not really any too serious bug that worth
for stopping the whole system.

OK, OK, let's be softy, downgrade it to the standard dev_err() again.

Fixes: dd65f7e19c69 ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")
Reported-by: syzbot+b3028ac3933f5c466389@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191216151224.30013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net, sysctl: Fix compiler warning when only cBPF is present

[ Upstream commit 1148f9adbe71415836a18a36c1b4ece999ab0973 ]

proc_dointvec_minmax_bpf_restricted() has been firstly introduced
in commit 2e4a30983b0f ("bpf: restrict access to core bpf sysctls")
under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in
ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv
allocations"), because a new sysctl, bpf_jit_limit, made use of it.
Finally, this parameter has become long instead of integer with
fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
and thus, a new proc_dolongvec_minmax_bpf_restricted() has been
added.

With this last change, we got back to that
proc_dointvec_minmax_bpf_restricted() is used only under
CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been
brought back.

So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n
since v4.20 we have:

  CC      net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
  292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.

Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191218091821.7080-1-alobakin@dlink.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Fix possibly incorrect severity calculation on AMD

[ Upstream commit a3a57ddad061acc90bef39635caf2b2330ce8f21 ]

The function mce_severity_amd_smca() requires m->bank to be initialized
for correct operation. Fix the one case, where mce_severity() is called
without doing so.

Fixes: 6bda529ec42e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems")
Fixes: d28af26faa0b ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20191210000733.17979-4-jschoenh@amazon.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel: sysctl: make drop_caches write-only

[ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]

Currently, the drop_caches proc file and sysctl read back the last value
written, suggesting this is somehow a stateful setting instead of a
one-time command.  Make it write-only, like e.g.  compact_memory.

While mitigating a VM problem at scale in our fleet, there was confusion
about whether writing to this file will permanently switch the kernel into
a non-caching mode.  This influences the decision making in a tense
situation, where tens of people are trying to fix tens of thousands of
affected machines: Do we need a rollback strategy?  What are the
performance implications of operating in a non-caching state for several
days?  It also caused confusion when the kernel team said we may need to
write the file several times to make sure it's effective ("But it already
reads back 3?").

Link: http://lkml.kernel.org/r/20191031221602.9375-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: fix passing zero to 'PTR_ERR' warning

[ Upstream commit 188c523e1c271d537f3c9f55b6b65bf4476de32f ]

Fix a static code checker warning:
fs/ocfs2/acl.c:331
ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR'

Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com
Fixes: 5ee0fbd50fd ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Check for SDBT and SDB consistency

[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ]

Each SBDT is located at a 4KB page and contains 512 entries.
Each entry of a SDBT points to a SDB, a 4KB page containing
sampled data. The last entry is a link to another SDBT page.

When an event is created the function sequence executed is:

  __hw_perf_event_init()
  +--> allocate_buffers()
       +--> realloc_sampling_buffers()
    +---> alloc_sample_data_block()

Both functions realloc_sampling_buffers() and
alloc_sample_data_block() allocate pages and the allocation
can fail. This is handled correctly and all allocated
pages are freed and error -ENOMEM is returned to the
top calling function. Finally the event is not created.

Once the event has been created, the amount of initially
allocated SDBT and SDB can be too low. This is detected
during measurement interrupt handling, where the amount
of lost samples is calculated. If the number of lost samples
is too high considering sampling frequency and already allocated
SBDs, the number of SDBs is enlarged during the next execution
of cpumsf_pmu_enable().

If more SBDs need to be allocated, functions

       realloc_sampling_buffers()
       +---> alloc-sample_data_block()

are called to allocate more pages. Page allocation may fail
and the returned error is ignored. A SDBT and SDB setup
already exists.

However the modified SDBTs and SDBs might end up in a situation
where the first entry of an SDBT does not point to an SDB,
but another SDBT, basicly an SBDT without payload.
This can not be handled by the interrupt handler, where an SDBT
must have at least one entry pointing to an SBD.

Add a check to avoid SDBTs with out payload (SDBs) when enlarging
the buffer setup.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h

[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]

The DTC v1.5.1 added references to (U)INT32_MAX.

This is no problem for user-space programs since <stdint.h> defines
(U)INT32_MAX along with (u)int32_t.

For the kernel space, libfdt_env.h needs to be adjusted before we
pull in the changes.

In the kernel, we usually use s/u32 instead of (u)int32_t for the
fixed-width types.

Accordingly, we already have S/U32_MAX for their max values.
So, we should not add (U)INT32_MAX to <linux/limits.h> any more.

Instead, add them to the in-kernel libfdt_env.h to compile the
latest libfdt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf regs: Make perf_reg_name() return "unknown" instead of NULL

[ Upstream commit 5b596e0ff0e1852197d4c82d3314db5e43126bf7 ]

To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.

Detected in a container mipsel debian cross build environment, where it
shows up as:

  In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2:
  /usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

  mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909

Also on mips64:

  In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_user__printf' at util/session.c:1139:3,
      inlined from 'dump_sample' at util/session.c:1246:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_intr__printf' at util/session.c:1147:3,
      inlined from 'dump_sample' at util/session.c:1249:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

  mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909

Fixes: 2bcd355b71da ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cdrom: respect device capabilities during opening action

[ Upstream commit 366ba7c71ef77c08d06b18ad61b26e2df7352338 ]

Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)

Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.

To: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/kallsyms: fix definitely-lost memory leak

[ Upstream commit 21915eca088dc271c970e8351290e83d938114ac ]

build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.

This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:

[Before the fix]

  LEAK SUMMARY:
     definitely lost: 53,184 bytes in 2,874 blocks

[After the fix]

  LEAK SUMMARY:
     definitely lost: 0 bytes in 0 blocks

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mpc8xxx: Don't overwrite default irq_set_type callback

[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]

The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.

The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:

- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio

On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).

Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: iscsi: Wait for all commands to finish before freeing a session

[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]

The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247

CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
dump_stack+0x8a/0xd6
print_address_description.constprop.0+0x40/0x60
__kasan_report.cold+0x1b/0x33
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
__lock_acquire+0xb1a/0x2710
lock_acquire+0xd3/0x200
_raw_spin_lock_irqsave+0x43/0x60
target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
target_put_sess_cmd+0x2e/0x40 [target_core_mod]
lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
target_complete_ok_work+0x1b0/0x790 [target_core_mod]
process_one_work+0x549/0xa40
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30

Allocated by task 889:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xf6/0x360
transport_alloc_session+0x29/0x80 [target_core_mod]
iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30

Freed by task 1025:
save_stack+0x23/0x90
__kasan_slab_free+0x13a/0x190
kasan_slab_free+0x12/0x20
kmem_cache_free+0x146/0x400
transport_free_session+0x179/0x2f0 [target_core_mod]
transport_deregister_session+0x130/0x180 [target_core_mod]
iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff8881154ec9c0
which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc

Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: num_tgts must be >= 0

[ Upstream commit aa5334c4f3014940f11bf876e919c956abef4089 ]

Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory

Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix for SATA device discovery

[ Upstream commit ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]

Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.

Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: work around deleting a file with i_nlink == 0 safely

[ Upstream commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 ]

If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero. Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.

A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.

https://bugzilla.kernel.org/show_bug.cgi?id=205433

Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Improve Windows Precision Touchpad detection.

[ Upstream commit 2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]

Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing
data used to verify the touchpad as a Windows Precision Touchpad.

   0x85, REPORTID_PTPHQA,    //    REPORT_ID (PTPHQA)
    0x09, 0xC5,              //    USAGE (Vendor Usage 0xC5)
    0x15, 0x00,              //    LOGICAL_MINIMUM (0)
    0x26, 0xff, 0x00,        //    LOGICAL_MAXIMUM (0xff)
    0x75, 0x08,              //    REPORT_SIZE (8)
    0x96, 0x00, 0x01,        //    REPORT_COUNT (0x100 (256))
    0xb1, 0x02,              //    FEATURE (Data,Var,Abs)

However, some devices, namely Microsoft's Surface line of products
instead implement a "segmented device certification report" (usage 0xC6)
which returns the same report, but in smaller chunks.

    0x06, 0x00, 0xff,        //     USAGE_PAGE (Vendor Defined)
    0x85, REPORTID_PTPHQA,   //     REPORT_ID (PTPHQA)
    0x09, 0xC6,              //     USAGE (Vendor usage for segment #)
    0x25, 0x08,              //     LOGICAL_MAXIMUM (8)
    0x75, 0x08,              //     REPORT_SIZE (8)
    0x95, 0x01,              //     REPORT_COUNT (1)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)
    0x09, 0xC7,              //     USAGE (Vendor Usage)
    0x26, 0xff, 0x00,        //     LOGICAL_MAXIMUM (0xff)
    0x95, 0x20,              //     REPORT_COUNT (32)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)

By expanding Win8 touchpad detection to also look for the segmented
report, all Surface touchpads are now properly recognized by
hid-multitouch.

Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: at least try to shrink 1 node in bch_mca_scan()

[ Upstream commit 9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ]

In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;

nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.

If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.

This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: pxa: fix one of the pxa RTC clocks

[ Upstream commit 46acbcb4849b2ca2e6e975e7c8130c1d61c8fd0c ]

The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and
rtc-pxa drivers.

A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't
fixed. This patch completes the previous one.

Fixes: 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE

[ Upstream commit 79172ab20bfd8437b277254028efdb68484e2c21 ]

Since the scsi subsystem adopted the blk-mq API, a host with zero
sg_tablesize crashes with a NULL pointer dereference.

blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM            QEMU     QEMU CD-ROM      2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004  SP: (ptrval)  a2: 00874520
d0: 00000000    d1: 00000000    d2: 009ba800    d3: 00000000
d4: 00000000    d5: 08000002    a0: 0087be68    a1: 009a81e0
Process kworker/u2:2 (pid: 15, task=(ptrval))
Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 0000007a 00000000
push data: 00000000 00000000 00000000 00000000
Stack from 0087bd98:
        00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
        0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
        00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
        00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
        009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
        00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14
[<0024d200>] __scsi_execute+0x124/0x174
[<0024d0dc>] __scsi_execute+0x0/0x174
[<00265d10>] sd_revalidate_disk+0xba/0x1f02
[<00265c56>] sd_revalidate_disk+0x0/0x1f02
[<0036ddf4>] strlen+0x0/0x22
[<00227ba0>] device_add+0x3da/0x604
[<0036ddf4>] strlen+0x0/0x22
[<00267e64>] sd_probe+0x30c/0x4b4
[<0002da44>] process_one_work+0x0/0x402
[<0022b978>] really_probe+0x226/0x354
[<0022bc34>] driver_probe_device+0xa4/0xf0
[<0002da44>] process_one_work+0x0/0x402
[<0022bcd0>] __driver_attach_async_helper+0x50/0x70
[<00035dae>] async_run_entry_fn+0x36/0x130
[<0002db88>] process_one_work+0x144/0x402
[<0002e1aa>] worker_thread+0x0/0x570
[<0002e29a>] worker_thread+0xf0/0x570
[<0002e1aa>] worker_thread+0x0/0x570
[<003768d8>] schedule+0x0/0xb8
[<0003f58c>] __init_waitqueue_head+0x0/0x12
[<00033e92>] kthread+0xc2/0xf6
[<000331e8>] kthread_parkme+0x0/0x4e
[<003768d8>] schedule+0x0/0xb8
[<00033dd0>] kthread+0x0/0xf6
[<00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c
Disabling lock debugging due to kernel taint

Avoid this by setting sg_tablesize = 1.

Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au
Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
References: commit 68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/security: Fix wrong message when RFI Flush is disable

[ Upstream commit 4e706af3cd8e1d0503c25332b30cad33c97ed442 ]

The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows:

  CPU | L1D private | RFI Flush |                sysfs
  ----|-------------|-----------|-------------------------------------
   P9 |    False    |   False   | Vulnerable
   P9 |    False    |   True    | Mitigation: RFI Flush
   P9 |    True     |   False   | Vulnerable: L1D private per thread
   P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per thread
   P8 |    False    |   False   | Vulnerable
   P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: L1D private per thread

Output after fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Vulnerable: L1D private per thread

Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/cmm: Implement release() function for sysfs device

[ Upstream commit 7d8212747435c534c8d564fbef4541a463c976ff ]

When unloading the module, one gets
  ------------[ cut here ]------------
  Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
  WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
  ...

We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: fix potential bug which ends in system hang

[ Upstream commit cfcbae3895b86c390ede57b2a8f601dd5972b47b ]

In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:

Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
Internal error: Oops: 96000047 [#2] PREEMPT SMP
...
Call trace:
  __memcpy+0x74/0x180
  ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
  ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
  ufs_bsg_request+0x178/0x3b0
  bsg_queue_rq+0xc0/0x118
  blk_mq_dispatch_rq_list+0xb0/0x538
  blk_mq_sched_dispatch_requests+0x18c/0x1d8
  __blk_mq_run_hw_queue+0xb4/0x118
  blk_mq_run_work_fn+0x28/0x38
  process_one_work+0x1ec/0x470
  worker_thread+0x48/0x458
  kthread+0x130/0x138
  ret_from_fork+0x10/0x1c
Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
---[ end trace 793e1eb5dff69f2d ]---
note: kworker/0:2H[2054] exited with preempt_count 1

This patch is to move "descriptor = NULL" down to below the label
"out_unlock".

Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences

[ Upstream commit 6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]

Coverity reported the following:

*** CID 101747:  Null pointer dereferences  (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433      kfree(mp);
4434      }
4435      mempool_free(mbox, phba->mbox_mem_pool);
4436      }
4437     out:
4438      if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv     CID 101747:  Null pointer dereferences  (FORWARD_NULL)
vvv     Dereferencing null pointer "shost".
4439      spin_lock_irq(shost->host_lock);
4440      ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441      spin_unlock_irq(shost->host_lock);
4442
4443      /* If the node is not being used by another discovery thread,
4444      * and we are sending a reject, we are done with it.

Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")

CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long

[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ]

Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.

Result may looks like:

fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689

Values bigger than 2^31-1 reported as negative.

All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.

Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.

Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip: ingenic: Error out if IRQ domain creation failed

[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ]

If we cannot create the IRQ domain, the driver should fail to probe
instead of succeeding with just a warning message.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary

[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ]

If the 'brcm,irq-can-wake' property is specified, make sure we also
enable the corresponding parent interrupt we are attached to.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: Allow constant ratio freq tables for rcg

[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ]

Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range.  It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:

{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
        { }

So, lets support that.

We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad.  Then, we need ignore the freq from the
table, and instead base everything on the requested freq.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow

[ Upstream commit 7cfd5639d99bec0d27af089d0c8c114330e43a72 ]

If the driver receives a login that is later then LOGO'd by the remote port
(aka ndlp), the driver, upon the completion of the LOGO ACC transmission,
will logout the node and unregister the rpi that is being used for the
node.  As part of the unreg, the node's rpi value is replaced by the
LPFC_RPI_ALLOC_ERROR value.  If the port is subsequently offlined, the
offline walks the nodes and ensures they are logged out, which possibly
entails unreg'ing their rpi values.  This path does not validate the node's
rpi value, thus doesn't detect that it has been unreg'd already.  The
replaced rpi value is then used when accessing the rpi bitmask array which
tracks active rpi values.  As the LPFC_RPI_ALLOC_ERROR value is not a valid
index for the bitmask, it may fault the system.

Revise the rpi release code to detect when the rpi value is the replaced
RPI_ALLOC_ERROR value and ignore further release steps.

Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)

[ Upstream commit f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]

According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: Fix statistics for the number of logged blocks

[ Upstream commit 015c6033068208d6227612c878877919f3fcf6b6 ]

jbd2 statistics counting number of blocks logged in a transaction was
wrong. It didn't count the commit block and more importantly it didn't
count revoke descriptor blocks. Make sure these get properly counted.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning

[ Upstream commit 16f6b67cf03cb43db7104acb2ca877bdc2606c92 ]

With large memory (8TB and more) hotplug, we can get soft lockup
warnings as below. These were caused by a long loop without any
explicit cond_resched which is a problem for !PREEMPT kernels.

Avoid this using cond_resched() while inserting hash page table
entries. We already do similar cond_resched() in __add_pages(), see
commit f64ac5e6e306 ("mm, memory_hotplug: add scheduling point to
__add_pages").

  rcu:     3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001
   (t=24003 jiffies g=4285 q=2002)
  NMI backtrace for cpu 3
  CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2
  Call Trace:
    dump_stack+0xb0/0xf4 (unreliable)
    nmi_cpu_backtrace+0x124/0x130
    nmi_trigger_cpumask_backtrace+0x1ac/0x1f0
    arch_trigger_cpumask_backtrace+0x28/0x3c
    rcu_dump_cpu_stacks+0xf8/0x154
    rcu_sched_clock_irq+0x878/0xb40
    update_process_times+0x48/0x90
    tick_sched_handle.isra.16+0x4c/0x80
    tick_sched_timer+0x68/0xe0
    __hrtimer_run_queues+0x180/0x430
    hrtimer_interrupt+0x110/0x300
    timer_interrupt+0x108/0x2f0
    decrementer_common+0x114/0x120
  --- interrupt: 901 at arch_add_memory+0xc0/0x130
      LR = arch_add_memory+0x74/0x130
    memremap_pages+0x494/0x650
    devm_memremap_pages+0x3c/0xa0
    pmem_attach_disk+0x188/0x750
    nvdimm_bus_probe+0xac/0x2c0
    really_probe+0x148/0x570
    driver_probe_device+0x19c/0x1d0
    device_driver_attach+0xcc/0x100
    bind_store+0x134/0x1c0
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1a0/0x270
    __vfs_write+0x3c/0x70
    vfs_write+0xd0/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x68

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001084656.31277-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/security/book3s64: Report L1TF status in sysfs

[ Upstream commit 8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]

Some PowerPC CPUs are vulnerable to L1TF to the same extent as to
Meltdown. It is also mitigated by flushing the L1D on privilege
transition.

Currently the sysfs gives a false negative on L1TF on CPUs that I
verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV
T2P9D01.

Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]
Link: https://lore.kernel.org/r/20191029190759.84821-1-asteinhauser@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/asm9260: Add a check for of_clk_get

[ Upstream commit 6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ]

asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: add a schedule point in debug_dma_dump_mappings()

[ Upstream commit 9ff6aa027dbb98755f0265695354f2dd07c0d1ce ]

debug_dma_dump_mappings() can take a lot of cpu cycles :

lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump

real 0m0.463s
user 0m0.003s
sys 0m0.459s

Let's add a cond_resched() to avoid holding cpu for too long.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Don't fail hash page table insert for bolted mapping

[ Upstream commit 75838a3290cd4ebbd1f567f310ba04b6ef017ce4 ]

If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table
insert by removing a random entry from the group.

After some runtime, it is very well possible to find all the 8 hash page table
entry slot in the hpte group used for mapping. Don't fail a bolted entry insert
in that case. With Storage class memory a user can find this error easily since
a namespace enable/disable is equivalent to memory add/remove.

This results in failures as reported below:

$ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M
libndctl: ndctl_dax_enable: dax1.3: failed to enable
Error: namespace1.2: failed to enable

failed to create namespace: No such device or address

In kernel log we find the details as below:

Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1
dax_pmem: probe of dax1.3 failed with error -14

This indicates that we failed to create a bolted hash table entry for direct-map
address backing the namespace.

We also observe failures such that not all namespaces will be enabled with
ndctl enable-namespace all command.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Mark accumulate_stolen_time() as notrace

[ Upstream commit eb8e20f89093b64f48975c74ccb114e6775cee22 ]

accumulate_stolen_time() is called prior to interrupt state being
reconciled, which can trip the warning in arch_local_irq_restore():

  WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
  ...
  NIP .arch_local_irq_restore+0x9c/0x130
  LR  .rb_start_commit+0x38/0x80
  Call Trace:
    .ring_buffer_lock_reserve+0xe4/0x620
    .trace_function+0x44/0x210
    .function_trace_call+0x148/0x170
    .ftrace_ops_no_ops+0x180/0x1d0
    ftrace_call+0x4/0x8
    .accumulate_stolen_time+0x1c/0xb0
    decrementer_common+0x124/0x160

For now just mark it as notrace. We may change the ordering to call it
after interrupt state has been reconciled, but that is a larger
change.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: csiostor: Don't enable IRQs too early

[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ]

These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices

[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]

When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.

Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: compare full CHAP_A Algorithm strings

[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ]

RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/tegra-smmu: Fix page tables in > 4 GiB memory

[ Upstream commit 96d3ab802e4930a29a33934373157d6dff1b2c7e ]

Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.

Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: atmel_mxt_ts - disable IRQ across suspend

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ]

Across suspend and resume, we are seeing error messages like the following:

atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)

This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.

Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.

Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix locking on mailbox command completion

[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ]

Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:

The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.

The mailbox response data is only copied if there is a valid port-wide
pointer.

In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion.  The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer.  The completion path had cleared the active flag under lock, but
had not touched the port pointer.  The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.

Fix by making the calls that clear mbox state/port pointer while under
lock.  Also slightly cleaned up the error path.

Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix clear pending bit in ioctl status

[ Upstream commit 782b281883caf70289ba6a186af29441a117d23e ]

When user issues diag register command from application with required size,
and if driver unable to allocate the memory, then it will fail the register
command. While failing the register command, driver is not currently
clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set
before trying to allocate the memory. As this bit is set, subsequent
register command will be failed with BUSY status even when user wants to
register the trace buffer will less memory.

Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag
register command with no memory status.

Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe: Fix to show function entry line as probe-able

commit 91e2f539eeda26ab00bd03fae8dc434c128c85ed upstream.

Fix die_walk_lines() to list the function entry line correctly. Since
the dwarf_entrypc() does not return the entry pc if the DIE has only
range attribute, __die_walk_funclines() fails to list the declaration
line (entry line) in that case.

To solve this issue, this introduces die_entrypc() which correctly
returns the entry PC (the first address range) even if the DIE has only
range attribute. With this fix die_walk_lines() shows the function entry
line is able to probe correctly.

Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: fix P2020 errata handling

commit fe0acab448f68c3146235afe03fb932e242ec94c upstream.

Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL

The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

This patch is to fix them.
host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/irq: fix stack overflow verification

commit 099bc4812f09155da77eeb960a983470249c9ce1 upstream.

Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.

Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.

Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for directory entries too close to block end

commit 109ba779d6cca2d519c5dd624a3276d03e21948e upstream.

ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix ext4_empty_dir() for directories with holes

commit 64d4ce892383b2ad6d782e080d25502f91bf2a38 upstream.

Function ext4_empty_dir() doesn't correctly handle directories with
holes and crashes on bh->b_data dereference when bh is NULL. Reorganize
the loop to use 'offset' variable all the times instead of comparing
pointers to current direntry with bh->b_data pointer. Also add more
strict checking of '.' and '..' directory entries to avoid entering loop
in possibly invalid state on corrupted filesystems.

References: CVE-2019-19037
CC: stable@vger.kernel.org
Fixes: 4e19d6b65fb4 ("ext4: allow directory holes")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value

commit ab42b48f32d4c766420c3499ee9c0289b7028182 upstream.

The "auto-attach" handler function `gsc_hpdi_auto_attach()` calls
`dma_alloc_coherent()` in a loop to allocate some DMA data buffers, and
also calls it to allocate a buffer for a DMA descriptor chain.  However,
it does not check the return value of any of these calls.  Change
`gsc_hpdi_auto_attach()` to return `-ENOMEM` if any of these
`dma_alloc_coherent()` calls fail.  This will result in the comedi core
calling the "detach" handler `gsc_hpdi_detach()` as part of the
clean-up, which will call `gsc_hpdi_free_dma()` to free any allocated
DMA coherent memory buffers.

Cc: <stable@vger.kernel.org> #4.6+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191216110823.216237-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes

commit 133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>