platform/kernel/linux-exynos.git
6 years agoPKCS#7: fix certificate chain verification
Eric Biggers [Thu, 22 Feb 2018 14:38:33 +0000 (14:38 +0000)]
PKCS#7: fix certificate chain verification

commit 971b42c038dc83e3327872d294fe7131bab152fc upstream.

When pkcs7_verify_sig_chain() is building the certificate chain for a
SignerInfo using the certificates in the PKCS#7 message, it is passing
the wrong arguments to public_key_verify_signature().  Consequently,
when the next certificate is supposed to be used to verify the previous
certificate, the next certificate is actually used to verify itself.

An attacker can use this bug to create a bogus certificate chain that
has no cryptographic relationship between the beginning and end.

Fortunately I couldn't quite find a way to use this to bypass the
overall signature verification, though it comes very close.  Here's the
reasoning: due to the bug, every certificate in the chain beyond the
first actually has to be self-signed (where "self-signed" here refers to
the actual key and signature; an attacker might still manipulate the
certificate fields such that the self_signed flag doesn't actually get
set, and thus the chain doesn't end immediately).  But to pass trust
validation (pkcs7_validate_trust()), either the SignerInfo or one of the
certificates has to actually be signed by a trusted key.  Since only
self-signed certificates can be added to the chain, the only way for an
attacker to introduce a trusted signature is to include a self-signed
trusted certificate.

But, when pkcs7_validate_trust_one() reaches that certificate, instead
of trying to verify the signature on that certificate, it will actually
look up the corresponding trusted key, which will succeed, and then try
to verify the *previous* certificate, which will fail.  Thus, disaster
is narrowly averted (as far as I could tell).

Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoX.509: fix NULL dereference when restricting key with unsupported_sig
Eric Biggers [Thu, 22 Feb 2018 14:38:34 +0000 (14:38 +0000)]
X.509: fix NULL dereference when restricting key with unsupported_sig

commit 4b34968e77ad09628cfb3c4a7daf2adc2cefc6e8 upstream.

The asymmetric key type allows an X.509 certificate to be added even if
its signature's hash algorithm is not available in the crypto API.  In
that case 'payload.data[asym_auth]' will be NULL.  But the key
restriction code failed to check for this case before trying to use the
signature, resulting in a NULL pointer dereference in
key_or_keyring_common() or in restrict_link_by_signature().

Fix this by returning -ENOPKG when the signature is unsupported.

Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled and
keyctl has support for the 'restrict_keyring' command:

    keyctl new_session
    keyctl restrict_keyring @s asymmetric builtin_trusted
    openssl req -new -sha512 -x509 -batch -nodes -outform der \
        | keyctl padd asymmetric desc @s

Fixes: a511e1af8b12 ("KEYS: Move the point of trust determination to __key_link()")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoX.509: fix BUG_ON() when hash algorithm is unsupported
Eric Biggers [Thu, 22 Feb 2018 14:38:33 +0000 (14:38 +0000)]
X.509: fix BUG_ON() when hash algorithm is unsupported

commit 437499eea4291ae9621e8763a41df027c110a1ef upstream.

The X.509 parser mishandles the case where the certificate's signature's
hash algorithm is not available in the crypto API.  In this case,
x509_get_sig_params() doesn't allocate the cert->sig->digest buffer;
this part seems to be intentional.  However,
public_key_verify_signature() is still called via
x509_check_for_self_signed(), which triggers the 'BUG_ON(!sig->digest)'.

Fix this by making public_key_verify_signature() return -ENOPKG if the
hash buffer has not been allocated.

Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled:

    openssl req -new -sha512 -x509 -batch -nodes -outform der \
        | keyctl padd asymmetric desc @s

Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier")
Reported-by: Paolo Valente <paolo.valente@linaro.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoi2c: bcm2835: Set up the rising/falling edge delays
Eric Anholt [Thu, 8 Feb 2018 13:54:05 +0000 (14:54 +0100)]
i2c: bcm2835: Set up the rising/falling edge delays

commit fe32a815f05c8568669a062587435e15f9345764 upstream.

We were leaving them in the power on state (or the state the firmware
had set up for some client, if we were taking over from them).  The
boot state was 30 core clocks, when we actually want to sample some
time after (to make sure that the new input bit has actually arrived).

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoi2c: designware: must wait for enable
Ben Gardner [Wed, 14 Feb 2018 15:29:52 +0000 (09:29 -0600)]
i2c: designware: must wait for enable

commit fba4adbbf670577e605f9ad306629db6031cd48b upstream.

One I2C bus on my Atom E3845 board has been broken since 4.9.
It has two devices, both declared by ACPI and with built-in drivers.

There are two back-to-back transactions originating from the kernel, one
targeting each device. The first transaction works, the second one locks
up the I2C controller. The controller never recovers.

These kernel logs show up whenever an I2C transaction is attempted after
this failure.
i2c-designware-pci 0000:00:18.3: timeout in disabling adapter
i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready

Waiting for the I2C controller status to indicate that it is enabled
before programming it fixes the issue.

I have tested this patch on 4.14 and 4.15.

Fixes: commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only if necessary")
Cc: linux-stable <stable@vger.kernel.org> #4.13+
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agocfg80211: fix cfg80211_beacon_dup
Arnd Bergmann [Fri, 2 Feb 2018 15:31:23 +0000 (16:31 +0100)]
cfg80211: fix cfg80211_beacon_dup

commit bee92d06157fc39d5d7836a061c7d41289a55797 upstream.

gcc-8 warns about some obviously incorrect code:

net/mac80211/cfg.c: In function 'cfg80211_beacon_dup':
net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

From the context, I conclude that we want to copy from beacon into
new_beacon, as we do in the rest of the function.

Cc: stable@vger.kernel.org
Fixes: 73da7d5bab79 ("mac80211: add channel switch command and beacon callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoMIPS: Drop spurious __unused in struct compat_flock
James Hogan [Tue, 20 Feb 2018 15:44:37 +0000 (15:44 +0000)]
MIPS: Drop spurious __unused in struct compat_flock

commit 6ae1756faddefd7494353380ee546dd38c2f97eb upstream.

MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it
has an extra short __unused before pad[4], which combined with alignment
increases the size to 40 bytes compared with struct flock's 36 bytes.

Since commit 8c6657cb50cb ("Switch flock copyin/copyout primitives to
copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock
struct to userland, which results in corruption of the userland word
after the struct flock when running 32-bit userlands on 64-bit kernels.

This was observed to cause a bus error exception when starting Firefox
on Debian 8 (Jessie).

Reported-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Tested-by: Peter Mamonov <pmamonov@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.13+
Patchwork: https://patchwork.linux-mips.org/patch/18646/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoscsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
Tyrel Datwyler [Wed, 24 Jan 2018 02:11:32 +0000 (20:11 -0600)]
scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info

commit c39813652700f3df552b6557530f1e5f782dbe2f upstream.

The fcp_rsp_info structure as defined in the FC spec has an initial 3
bytes reserved field. The ibmvfc driver mistakenly defined this field as
4 bytes resulting in the rsp_code field being defined in what should be
the start of the second reserved field and thus always being reported as
zero by the driver.

Ideally, we should wire ibmvfc up with libfc for the sake of code
deduplication, and ease of maintaining standardized structures in a
single place. However, for now simply fixup the definition in ibmvfc for
backporting to distros on older kernels. Wiring up with libfc will be
done in a followup patch.

Cc: <stable@vger.kernel.org>
Reported-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoxtensa: fix high memory/reserved memory collision
Max Filippov [Tue, 13 Feb 2018 23:31:05 +0000 (15:31 -0800)]
xtensa: fix high memory/reserved memory collision

commit 6ac5a11dc674bc5016ea716e8082fff61f524dc1 upstream.

Xtensa memory initialization code frees high memory pages without
checking whether they are in the reserved memory regions or not. That
results in invalid value of totalram_pages and duplicate page usage by
CMA and highmem. It produces a bunch of BUGs at startup looking like
this:

BUG: Bad page state in process swapper  pfn:70800
page:be60c000 count:0 mapcount:-127 mapping:  (null) index:0x1
flags: 0x80000000()
raw: 80000000 00000000 00000001 ffffff80 00000000 be60c014 be60c014 0000000a
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G    B            4.16.0-rc1-00015-g7928b2cbe55b-dirty #23
Stack:
 bd839d33 00000000 00000018 ba97b64c a106578c bd839d70 be60c000 00000000
 a1378054 bd86a000 00000003 ba97b64c a1066166 bd839da0 be60c000 ffe00000
 a1066b58 bd839dc0 be504000 00000000 000002f4 bd838000 00000000 0000001e
Call Trace:
 [<a1065734>] bad_page+0xac/0xd0
 [<a106578c>] free_pages_check_bad+0x34/0x4c
 [<a1066166>] __free_pages_ok+0xae/0x14c
 [<a1066b58>] __free_pages+0x30/0x64
 [<a1365de5>] init_cma_reserved_pageblock+0x35/0x44
 [<a13682dc>] cma_init_reserved_areas+0xf4/0x148
 [<a10034b8>] do_one_initcall+0x80/0xf8
 [<a1361c16>] kernel_init_freeable+0xda/0x13c
 [<a125b59d>] kernel_init+0x9/0xd0
 [<a1004304>] ret_from_kernel_thread+0xc/0x18

Only free high memory pages that are not reserved.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoMIPS: boot: Define __ASSEMBLY__ for its.S build
Kees Cook [Fri, 23 Feb 2018 00:59:26 +0000 (16:59 -0800)]
MIPS: boot: Define __ASSEMBLY__ for its.S build

commit 0f9da844d87796ac31b04e81ee95e155e9043132 upstream.

The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.

The failure was:

    Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
    FATAL ERROR: Unable to parse input tree
    /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
    /usr/bin/mkimage Can't add hashes to FIT blob

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agokconfig.h: Include compiler types to avoid missed struct attributes
Kees Cook [Thu, 22 Feb 2018 17:41:40 +0000 (09:41 -0800)]
kconfig.h: Include compiler types to avoid missed struct attributes

commit 28128c61e08eaeced9cc8ec0e6b5d677b5b94690 upstream.

The header files for some structures could get included in such a way
that struct attributes (specifically __randomize_layout from path.h) would
be parsed as variable names instead of attributes. This could lead to
some instances of a structure being unrandomized, causing nasty GPFs, etc.

This patch makes sure the compiler_types.h header is included in
kconfig.h so that we've always got types and struct attributes defined,
since kconfig.h is included from the compiler command line.

Reported-by: Patrick McLean <chutzpah@gentoo.org>
Root-caused-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: 3859a271a003 ("randstruct: Mark various structs for randomization")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoarm64: mm: don't write garbage into TTBR1_EL1 register
Ard Biesheuvel [Fri, 23 Feb 2018 18:29:02 +0000 (18:29 +0000)]
arm64: mm: don't write garbage into TTBR1_EL1 register

Stable backport commit 173358a49173 ("arm64: kpti: Add ->enable callback
to remap swapper using nG mappings") of upstream commit f992b4dfd58b did
not survive the backporting process unscathed, and ends up writing garbage
into the TTBR1_EL1 register, rather than pointing it to the zero page to
disable translations. Fix that.

Cc: <stable@vger.kernel.org> #v4.14
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonetfilter: drop outermost socket lock in getsockopt()
Paolo Abeni [Thu, 8 Feb 2018 11:19:00 +0000 (12:19 +0100)]
netfilter: drop outermost socket lock in getsockopt()

commit 01ea306f2ac2baff98d472da719193e738759d93 upstream.

The Syzbot reported a possible deadlock in the netfilter area caused by
rtnl lock, xt lock and socket lock being acquired with a different order
on different code paths, leading to the following backtrace:
Reviewed-by: Xin Long <lucien.xin@gmail.com>
======================================================
WARNING: possible circular locking dependency detected
4.15.0+ #301 Not tainted
------------------------------------------------------
syzkaller233489/4179 is trying to acquire lock:
  (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

but task is already holding lock:
  (&xt[i].mutex){+.+.}, at: [<00000000328553a2>]
xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041

which lock already depends on the new lock.
===

Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), we already acquire the socket lock in
the innermost scope, where needed. In such commit I forgot to remove
the outer-most socket lock from the getsockopt() path, this commit
addresses the issues dropping it now.

v1 -> v2: fix bad subj, added relavant 'fixes' tag

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoLinux 4.14.22 v4.14.22
Greg Kroah-Hartman [Sun, 25 Feb 2018 10:08:04 +0000 (11:08 +0100)]
Linux 4.14.22

6 years agovmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems
Michal Hocko [Wed, 21 Feb 2018 22:46:01 +0000 (14:46 -0800)]
vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems

commit 698d0831ba87b92ae10b15e8203cfd59f5a59a35 upstream.

Kai Heng Feng has noticed that BUG_ON(PageHighMem(pg)) triggers in
drivers/media/common/saa7146/saa7146_core.c since 19809c2da28a ("mm,
vmalloc: use __GFP_HIGHMEM implicitly").

saa7146_vmalloc_build_pgtable uses vmalloc_32 and it is reasonable to
expect that the resulting page is not in highmem.  The above commit
aimed to add __GFP_HIGHMEM only for those requests which do not specify
any zone modifier gfp flag.  vmalloc_32 relies on GFP_VMALLOC32 which
should do the right thing.  Except it has been missed that GFP_VMALLOC32
is an alias for GFP_KERNEL on 32b architectures.  Thanks to Matthew to
notice this.

Fix the problem by unconditionally setting GFP_DMA32 in GFP_VMALLOC32
for !64b arches (as a bailout).  This should do the right thing and use
ZONE_NORMAL which should be always below 4G on 32b systems.

Debugged by Matthew Wilcox.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20180212095019.GX21609@dhcp22.suse.cz
Fixes: 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly”)
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomei: me: add cannon point device ids for 4th device
Tomas Winkler [Sun, 18 Feb 2018 09:05:16 +0000 (11:05 +0200)]
mei: me: add cannon point device ids for 4th device

commit 2a4ac172c2f257d28c47b90c9e381bec31edcc44 upstream.

Add cannon point device ids for 4th (itouch) device.

Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomei: me: add cannon point device ids
Alexander Usyskin [Sun, 18 Feb 2018 09:05:15 +0000 (11:05 +0200)]
mei: me: add cannon point device ids

commit f8f4aa68a8ae98ed79c8fee3488c38a2f5d2de8c upstream.

Add CNP LP and CNP H device ids for cannon lake
and coffee lake platforms.

Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agocrypto: s5p-sss - Fix kernel Oops in AES-ECB mode
Kamil Konieczny [Wed, 7 Feb 2018 15:52:09 +0000 (16:52 +0100)]
crypto: s5p-sss - Fix kernel Oops in AES-ECB mode

commit c927b080c67e3e97193c81fc1d27f4251bf4e036 upstream.

In AES-ECB mode crypt is done with key only, so any use of IV
can cause kernel Oops. Use IV only in AES-CBC and AES-CTR.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reported-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org # can be applied after commit 8f9702aad138
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agodrm/i915: fix intel_backlight_device_register declaration
Arnd Bergmann [Mon, 27 Nov 2017 15:10:27 +0000 (16:10 +0100)]
drm/i915: fix intel_backlight_device_register declaration

commit ac29fc66855b79c2960c63a4a66952d5b721d698 upstream.

The alternative intel_backlight_device_register() definition apparently
never got used, but I have now run into a case of i915 being compiled
without CONFIG_BACKLIGHT_CLASS_DEVICE, resulting in a number of
identical warnings:

drivers/gpu/drm/i915/intel_drv.h:1739:12: error: 'intel_backlight_device_register' defined but not used [-Werror=unused-function]

This marks the function as 'inline', which was surely the original
intention here.

Fixes: 1ebaa0b9c2d4 ("drm/i915: Move backlight registration to connector registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127151239.1813673-1-arnd@arndb.de
(cherry picked from commit 2de2d0b063b08becb2c67a2c338c44e37bdcffee)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agocrypto: talitos - fix Kernel Oops on hashing an empty file
LEROY Christophe [Fri, 26 Jan 2018 16:09:59 +0000 (17:09 +0100)]
crypto: talitos - fix Kernel Oops on hashing an empty file

commit 87a81dce53b1ea61acaeefa5191a0376a2d1d721 upstream.

Performing the hash of an empty file leads to a kernel Oops

[   44.504600] Unable to handle kernel paging request for data at address 0x0000000c
[   44.512819] Faulting instruction address: 0xc02d2be8
[   44.524088] Oops: Kernel access of bad area, sig: 11 [#1]
[   44.529171] BE PREEMPT CMPC885
[   44.532232] CPU: 0 PID: 491 Comm: md5sum Not tainted 4.15.0-rc8-00211-g3a968610b6ea #81
[   44.540814] NIP:  c02d2be8 LR: c02d2984 CTR: 00000000
[   44.545812] REGS: c6813c90 TRAP: 0300   Not tainted  (4.15.0-rc8-00211-g3a968610b6ea)
[   44.554223] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 48222822  XER: 20000000
[   44.560855] DAR: 0000000c DSISR: c0000000
[   44.560855] GPR00: c02d28fc c6813d40 c6828000 c646fa40 00000001 00000001 00000001 00000000
[   44.560855] GPR08: 0000004c 00000000 c000bfcc 00000000 28222822 100280d4 00000000 10020008
[   44.560855] GPR16: 00000000 00000020 00000000 00000000 10024008 00000000 c646f9f0 c6179a10
[   44.560855] GPR24: 00000000 00000001 c62f0018 c6179a10 00000000 c6367a30 c62f0000 c646f9c0
[   44.598542] NIP [c02d2be8] ahash_process_req+0x448/0x700
[   44.603751] LR [c02d2984] ahash_process_req+0x1e4/0x700
[   44.608868] Call Trace:
[   44.611329] [c6813d40] [c02d28fc] ahash_process_req+0x15c/0x700 (unreliable)
[   44.618302] [c6813d90] [c02060c4] hash_recvmsg+0x11c/0x210
[   44.623716] [c6813db0] [c0331354] ___sys_recvmsg+0x98/0x138
[   44.629226] [c6813eb0] [c03332c0] __sys_recvmsg+0x40/0x84
[   44.634562] [c6813f10] [c03336c0] SyS_socketcall+0xb8/0x1d4
[   44.640073] [c6813f40] [c000d1ac] ret_from_syscall+0x0/0x38
[   44.645530] Instruction dump:
[   44.648465] 38c00001 7f63db78 4e800421 7c791b78 54690ffe 0f090000 80ff0190 2f870000
[   44.656122] 40befe50 2f990001 409e0210 813f01bc <8129000cb39e003a 7d29c214 913e003c

This patch fixes that Oops by checking if src is NULL.

Fixes: 6a1e8d14156d4 ("crypto: talitos - making mapping helpers more generic")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agohippi: Fix a Fix a possible sleep-in-atomic bug in rr_close
Jia-Ju Bai [Tue, 12 Dec 2017 08:49:52 +0000 (16:49 +0800)]
hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close

[ Upstream commit 6e266610eb6553cfb7e7eb5d11914bd01509c406 ]

The driver may sleep under a spinlock.
The function call path is:
rr_close (acquire the spinlock)
  free_irq --> may sleep

To fix it, free_irq is moved to the place without holding the spinlock.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agopowerpc/perf/imc: Fix nest-imc cpuhotplug callback failure
Anju T Sudhakar [Tue, 5 Dec 2017 05:30:38 +0000 (11:00 +0530)]
powerpc/perf/imc: Fix nest-imc cpuhotplug callback failure

[ Upstream commit ad2b6e01024ef23bddc3ce0bcb115ecd8c520b7e ]

Oops is observed during boot:

  Faulting instruction address: 0xc000000000248340
  cpu 0x0: Vector: 380 (Data Access Out of Range) at [c000000ff66fb850]
      pc: c000000000248340: event_function_call+0x50/0x1f0
      lr: c00000000024878c: perf_remove_from_context+0x3c/0x100
      sp: c000000ff66fbad0
     msr: 9000000000009033
     dar: 7d20e2a6f92d03c0
    pid = 14, comm = cpuhp/0

While registering the cpuhotplug callbacks for nest-imc, if we fail in
the cpuhotplug online path for any random node in a multi node
system (because the opal call to stop nest-imc counters fails for that
node), ppc_nest_imc_cpu_offline() will get invoked for other nodes who
successfully returned from cpuhotplug online path.

This call trace is generated since in the ppc_nest_imc_cpu_offline()
path we are trying to migrate the event context, when nest-imc
counters are not even initialized.

Patch to add a check to ensure that nest-imc is registered before
migrating the event context.

Fixes: 885dcd709ba9 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoPCI: rcar: Fix use-after-free in probe error path
Geert Uytterhoeven [Thu, 7 Dec 2017 10:15:19 +0000 (11:15 +0100)]
PCI: rcar: Fix use-after-free in probe error path

[ Upstream commit 0c31f1d7be1b5c4858b1d714dcefa25f41428cab ]

If CONFIG_DEBUG_SLAB=y, and no PCIe card is inserted, the kernel crashes
during probe on r8a7791/koelsch:

  rcar-pcie fe000000.pcie: PCIe link down
  Unable to handle kernel paging request at virtual address 6b6b6b6b

(seeing this message requires earlycon and keep_bootcon).

Indeed, pci_free_host_bridge() frees the PCI host bridge, including the
embedded rcar_pcie object, so pci_free_resource_list() must not be called
afterwards.

To fix this, move the call to pci_free_resource_list() up, and update the
label name accordingly.

Fixes: ddd535f1ea3eb27e ("PCI: rcar: Fix memory leak when no PCIe card is inserted")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoxen: XEN_ACPI_PROCESSOR is Dom0-only
Jan Beulich [Tue, 12 Dec 2017 10:18:11 +0000 (03:18 -0700)]
xen: XEN_ACPI_PROCESSOR is Dom0-only

[ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ]

Add a respective dependency.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoplatform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410
Pali Rohár [Thu, 2 Nov 2017 20:25:24 +0000 (21:25 +0100)]
platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410

[ Upstream commit 68a213d325c23d39f109f4c7c824b906a7d209de ]

This machine reports number of keyboard backlight led levels, instead of
value of the last led level index. Therefore max_brightness properly needs
to be subtracted by 1 to match led max_brightness API.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agox86/mm/kmmio: Fix mmiotrace for page unaligned addresses
Karol Herbst [Mon, 27 Nov 2017 07:51:39 +0000 (08:51 +0100)]
x86/mm/kmmio: Fix mmiotrace for page unaligned addresses

[ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ]

If something calls ioremap() with an address not aligned to PAGE_SIZE, the
returned address might be not aligned as well. This led to a probe
registered on exactly the returned address, but the entire page was armed
for mmiotracing.

On calling iounmap() the address passed to unregister_kmmio_probe() was
PAGE_SIZE aligned by the caller leading to a complete freeze of the
machine.

We should always page align addresses while (un)registerung mappings,
because the mmiotracer works on top of pages, not mappings. We still keep
track of the probes based on their real addresses and lengths though,
because the mmiotrace still needs to know what are mapped memory regions.

Also move the call to mmiotrace_iounmap() prior page aligning the address,
so that all probes are unregistered properly, otherwise the kernel ends up
failing memory allocations randomly after disabling the mmiotracer.

Tested-by: Lyude <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: nouveau@lists.freedesktop.org
Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomm/early_ioremap: Fix boot hang with earlyprintk=efi,keep
Dave Young [Sat, 9 Dec 2017 04:16:10 +0000 (12:16 +0800)]
mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep

[ Upstream commit 7f6f60a1ba52538c16f26930bfbcfe193d9d746a ]

earlyprintk=efi,keep does not work any more with a warning
in mm/early_ioremap.c: WARN_ON(system_state != SYSTEM_BOOTING):
Boot just hangs because of the earlyprintk within the earlyprintk
implementation code itself.

This is caused by a new introduced middle state in:

  69a78ff226fe ("init: Introduce SYSTEM_SCHEDULING state")

early_ioremap() is fine in both SYSTEM_BOOTING and SYSTEM_SCHEDULING
states, original condition should be updated accordingly.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@suse.de
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20171209041610.GA3249@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agousb: dwc3: of-simple: fix missing clk_disable_unprepare
Andreas Platschek [Thu, 7 Dec 2017 10:32:20 +0000 (11:32 +0100)]
usb: dwc3: of-simple: fix missing clk_disable_unprepare

[ Upstream commit ded600ea9fb51a495d2fcd21e90351df876488e8 ]

If of_clk_get() fails, the clean-up of already initialized clocks should be
the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare()
for each clock should be called before the clk_put().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization")

Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agousb: dwc3: gadget: Wait longer for controller to end command processing
Vincent Pelletier [Thu, 30 Nov 2017 15:31:06 +0000 (15:31 +0000)]
usb: dwc3: gadget: Wait longer for controller to end command processing

[ Upstream commit 8722e095f5a44d0e409e45c5ddc2ee9cf589c777 ]

DWC3_DEPCMD_ENDTRANSFER has been witnessed to require around 600 iterations
before controller would become idle again after unplugging the USB cable
with AIO reads submitted.
Bump timeout from 500 iterations to 1000 so dwc3_stop_active_transfer does
not receive -ETIMEDOUT and does not WARN:

[   81.326273] ------------[ cut here ]------------
[   81.335341] WARNING: CPU: 0 PID: 1874 at drivers/usb/dwc3/gadget.c:2627 dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3]
[   81.347094] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil dwc3 intel_powerclamp coretemp ulpi kvm_intel udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd basincove_gpadc industrialio gpio_keys usbcore usb_common
[   81.378142] CPU: 0 PID: 1874 Comm: irq/34-dwc3 Not tainted 4.14.0-edison+ #119
[   81.385545] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[   81.394548] task: f5b1be00 task.stack: f420a000
[   81.399219] EIP: dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3]
[   81.406086] EFLAGS: 00010086 CPU: 0
[   81.409672] EAX: 0000001f EBX: f5729800 ECX: c132a2a2 EDX: 00000000
[   81.416096] ESI: f4054014 EDI: f41cf400 EBP: f420be10 ESP: f420bdf4
[   81.422521]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[   81.428061] CR0: 80050033 CR2: b7a3f000 CR3: 01d94000 CR4: 001006d0
[   81.434483] Call Trace:
[   81.437063]  __dwc3_gadget_ep_disable+0xa3/0x2b0 [dwc3]
[   81.442438]  ? _raw_spin_lock_irqsave+0x32/0x40
[   81.447135]  dwc3_gadget_ep_disable+0xbf/0xe0 [dwc3]
[   81.452269]  usb_ep_disable+0x1c/0xd0 [udc_core]
[   81.457048]  ffs_func_eps_disable.isra.15+0x3b/0x90 [usb_f_fs]
[   81.463070]  ffs_func_set_alt+0x7d/0x310 [usb_f_fs]
[   81.468132]  ffs_func_disable+0x14/0x20 [usb_f_fs]
[   81.473075]  reset_config+0x5b/0x90 [libcomposite]
[   81.478023]  composite_disconnect+0x2b/0x50 [libcomposite]
[   81.483685]  dwc3_disconnect_gadget+0x39/0x50 [dwc3]
[   81.488808]  dwc3_gadget_disconnect_interrupt+0x21b/0x250 [dwc3]
[   81.495014]  dwc3_thread_interrupt+0x2a8/0xf70 [dwc3]
[   81.500219]  ? __schedule+0x78c/0x7e0
[   81.504027]  irq_thread_fn+0x18/0x30
[   81.507715]  ? irq_thread+0xb7/0x180
[   81.511400]  irq_thread+0x111/0x180
[   81.515000]  ? irq_finalize_oneshot+0xe0/0xe0
[   81.519490]  ? wake_threads_waitq+0x30/0x30
[   81.523806]  kthread+0x107/0x110
[   81.527131]  ? disable_percpu_irq+0x50/0x50
[   81.531439]  ? kthread_stop+0x150/0x150
[   81.535397]  ret_from_fork+0x19/0x24
[   81.539136] Code: 89 d8 c7 45 ec 00 00 00 00 c7 45 f0 00 00 00 00 c7 45 f4 00 00 00 00 e8 56 ef ff ff 85 c0 74 12 50 68 b9 1c 14 f8 e8 64 0f f7 c8 <0f> ff 58 5a 8d 76 00 8b 83 98 00 00 00 c6 83 a0 00 00 00 00 83
[   81.559295] ---[ end trace f3133eec81a473b8 ]---

Number of iterations measured on 4 consecutive unplugs:
[ 1088.799777] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 605 times
[ 1222.024986] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 580 times
[ 1317.590452] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 598 times
[ 1453.218314] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 594 times

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agodmaengine: jz4740: disable/unprepare clk if probe fails
Tobias Jordan [Wed, 6 Dec 2017 13:28:27 +0000 (14:28 +0100)]
dmaengine: jz4740: disable/unprepare clk if probe fails

[ Upstream commit eb9436966fdc84cebdf222952a99898ab46d9bb0 ]

in error path of jz4740_dma_probe(), call clk_disable_unprepare() to clean
up.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 25ce6c35fea0 MIPS: jz4740: Remove custom DMA API
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agodrm/vc4: Release fence after signalling
Stefan Schake [Sat, 2 Dec 2017 17:40:39 +0000 (18:40 +0100)]
drm/vc4: Release fence after signalling

[ Upstream commit babc8110057cb9ca542c3c1666cbda4e8ccf9250 ]

We were never releasing the initial fence reference that is obtained
through dma_fence_init.

Link: https://github.com/anholt/linux/issues/122
Fixes: cdec4d361323 ("drm/vc4: Expose dma-buf fences for V3D rendering.")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1512236444-301-1-git-send-email-stschake@gmail.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update
Jiada Wang [Fri, 8 Dec 2017 06:15:38 +0000 (22:15 -0800)]
ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update

[ Upstream commit 33f801366bdf3f8b67dfe325b84f4051a090d01e ]

Currently there is race condition between set of byte_pos and wrap
it around when new buffer starts. If .pointer is called in-between
it will result in inconsistent pointer position be returned
from .pointer callback.

This patch increments buffer pointer atomically to avoid this issue.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agodrm/armada: fix leak of crtc structure
Russell King [Fri, 8 Dec 2017 12:16:22 +0000 (12:16 +0000)]
drm/armada: fix leak of crtc structure

[ Upstream commit 33cd3c07a976e11c3c4cc6b0b3db6760ad1590c5 ]

Fix the leak of the CRTC structure in the failure paths of
armada_drm_crtc_create().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoxfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.
Steffen Klassert [Fri, 8 Dec 2017 07:07:25 +0000 (08:07 +0100)]
xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.

[ Upstream commit 732706afe1cc46ef48493b3d2b69c98f36314ae4 ]

On policies with a transport mode template, we pass the addresses
from the flowi to xfrm_state_find(), assuming that the IP addresses
(and address family) don't change during transformation.

Unfortunately our policy template validation is not strict enough.
It is possible to configure policies with transport mode template
where the address family of the template does not match the selectors
address family. This lead to stack-out-of-bound reads because
we compare arddesses of the wrong family. Fix this by refusing
such a configuration, address family can not change on transport
mode.

We use the assumption that, on transport mode, the first templates
address family must match the address family of the policy selector.
Subsequent transport mode templates must mach the address family of
the previous template.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoIB/mlx4: Fix RSS hash fields restrictions
Guy Levi [Tue, 5 Dec 2017 20:30:03 +0000 (22:30 +0200)]
IB/mlx4: Fix RSS hash fields restrictions

[ Upstream commit 4d02ebd9bbbdde1d524e62b540b0402cee7bbcdf ]

Mistakenly the driver didn't allow RSS hash fields combinations which
involve both IPv4 and IPv6 protocols. This bug caused to failures for
user's use cases for RSS.

Consequently, this patch fixes this bug and allows any combination that
the HW can support.

Additionally, the patch fixes the driver to return an error in case the
user provides an unsupported mask for RSS hash fields.

Fixes: 3078f5f1bd8b ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agospi: sun4i: disable clocks in the remove function
Takuo Koguchi [Thu, 7 Dec 2017 07:20:14 +0000 (16:20 +0900)]
spi: sun4i: disable clocks in the remove function

[ Upstream commit c810daba0ab5226084a56893a789af427a801146 ]

mclk and hclk need to be disabled. Since pm_runtime_disable does
not disable the clocks, use pm_runtime_force_suspend instead.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoASoC: rockchip: disable clock on error
Stefan Potyra [Wed, 6 Dec 2017 15:03:24 +0000 (16:03 +0100)]
ASoC: rockchip: disable clock on error

[ Upstream commit c7b92172a61b91936be985cb9bc499a4ebc6489b ]

Disable the clocks in  rk_spdif_probe when an error occurs after one
of the clocks has been enabled previously.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: f874b80e1571 ASoC: rockchip: Add rockchip SPDIF transceiver driver
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agostaging: ccree: Uninitialized return in ssi_ahash_import()
Dan Carpenter [Tue, 5 Dec 2017 14:37:17 +0000 (17:37 +0300)]
staging: ccree: Uninitialized return in ssi_ahash_import()

[ Upstream commit aece09024414b54158e03aa45f4a4436e7cb996c ]

The return value isn't initialized on some success paths.

Fixes: c5f39d07860c ("staging: ccree: fix leak of import() after init()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoclk: fix a panic error caused by accessing NULL pointer
Cai Li [Tue, 21 Nov 2017 09:24:38 +0000 (17:24 +0800)]
clk: fix a panic error caused by accessing NULL pointer

[ Upstream commit 975b820b6836b6b6c42fb84cd2e772e2b41bca67 ]

In some cases the clock parent would be set NULL when doing re-parent,
it will cause a NULL pointer accessing if clk_set trace event is
enabled.

This patch sets the parent as "none" if the input parameter is NULL.

Fixes: dfc202ead312 (clk: Add tracepoints for hardware operations)
Signed-off-by: Cai Li <cai.li@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonetfilter: xt_bpf: add overflow checks
Jann Horn [Fri, 1 Dec 2017 00:46:07 +0000 (01:46 +0100)]
netfilter: xt_bpf: add overflow checks

[ Upstream commit 6ab405114b0b229151ef06f4e31c7834dd09d0c0 ]

Check whether inputs from userspace are too long (explicit length field too
big or string not null-terminated) to avoid out-of-bounds reads.

As far as I can tell, this can at worst lead to very limited kernel heap
memory disclosure or oopses.

This bug can be triggered by an unprivileged user even if the xt_bpf module
is not loaded: iptables is available in network namespaces, and the xt_bpf
module can be autoloaded.

Triggering the bug with a classic BPF filter with fake length 0x1000 causes
the following KASAN report:

==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0
Read of size 32768 at addr ffff8801eff2c494 by task test/4627

CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1
[...]
Call Trace:
 dump_stack+0x5c/0x85
 print_address_description+0x6a/0x260
 kasan_report+0x254/0x370
 ? bpf_prog_create+0x84/0xf0
 memcpy+0x1f/0x50
 bpf_prog_create+0x84/0xf0
 bpf_mt_check+0x90/0xd6 [xt_bpf]
[...]
Allocated by task 4627:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc_node+0x47/0x60
 xt_alloc_table_info+0x41/0x70 [x_tables]
[...]
The buggy address belongs to the object at ffff8801eff2c3c0
                which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 212 bytes inside of
                2048-byte region [ffff8801eff2c3c0ffff8801eff2cbc0)
[...]
==================================================================

Fixes: e6f30c731718 ("netfilter: x_tables: add xt_bpf match")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoxfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)
Aviv Heller [Tue, 28 Nov 2017 17:55:40 +0000 (19:55 +0200)]
xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)

[ Upstream commit 4ce3dbe397d7b6b15f272ae757c78c35e9e4b61d ]

Code path when (encap_type < 0) does not verify the state is valid
before progressing.

This will result in a crash if, for instance, x->km.state ==
XFRM_STATE_ACQ.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agodmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
Gustavo A. R. Silva [Mon, 20 Nov 2017 14:28:14 +0000 (08:28 -0600)]
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved

[ Upstream commit 62a277d43d47e74972de44d33bd3763e31992414 ]

_xt_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _xt_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: 4483320e241c ("dmaengine: Use Pointer xt after NULL check.")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agodmaengine: ioat: Fix error handling path
Christophe JAILLET [Fri, 17 Nov 2017 21:37:53 +0000 (22:37 +0100)]
dmaengine: ioat: Fix error handling path

[ Upstream commit 5c9afbda911ce20b3f2181d1e440a0222e1027dd ]

If the last test in 'ioat_dma_self_test()' fails, we must release all
the allocated resources and not just part of them.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoscsi: bfa: fix type conversion warning
Arnd Bergmann [Wed, 6 Dec 2017 14:14:18 +0000 (15:14 +0100)]
scsi: bfa: fix type conversion warning

commit 48d83282db077f93b2cf40de120f4d6f29eb293b upstream.

A regression fix introduced a harmless type mismatch warning:

drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_vendor_request':
drivers/scsi/bfa/bfad_bsg.c:3137:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
  struct bfad_im_port_s *im_port = shost->hostdata[0];
                                   ^~~~~
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_els_ct_request':
drivers/scsi/bfa/bfad_bsg.c:3353:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
  struct bfad_im_port_s *im_port = shost->hostdata[0];

This changes the code back to shost_priv() once more, but encapsulates
it in an inline function to document the rather unusual way of
using the private data only as a pointer to the previously allocated
structure.

I did not try to get rid of the extra indirection level entirely,
which would have been rather invasive and required reworking the entire
initialization sequence.

Fixes: 45349821ab3a ("scsi: bfa: fix access to bfad_im_port_s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoscsi: bfa: fix access to bfad_im_port_s
Johannes Thumshirn [Tue, 28 Nov 2017 15:26:57 +0000 (16:26 +0100)]
scsi: bfa: fix access to bfad_im_port_s

[ Upstream commit 45349821ab3a8d378b8f37e52c6fe1aa1b870c47 ]

Commit 'cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")'
changed access to bfa's 'struct bfad_im_port_s' by using shost_priv()
instead of shost->hostdata[0].

This lead to crashes like in the following back-trace:

task: ffff880046375300 ti: ffff8800a2ef8000 task.ti: ffff8800a2ef8000
RIP: e030:[<ffffffffa04c8252>]  [<ffffffffa04c8252>] bfa_fcport_get_attr+0x82/0x260 [bfa]
RSP: e02b:ffff8800a2efba10  EFLAGS: 00010046
RAX: 575f415441536432 RBX: ffff8800a2efba28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8800a2efba28 RDI: ffff880004dc31d8
RBP: ffff880004dc31d8 R08: 0000000000000000 R09: 0000000000000001
R10: ffff88011fadc468 R11: 0000000000000001 R12: ffff880004dc31f0
R13: 0000000000000200 R14: ffff880004dc61d0 R15: ffff880004947a10
FS:  00007feb1e489700(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007ffe14e46c10 CR3: 00000000957b8000 CR4: 0000000000000660
Stack:
 ffff88001d4da000 ffff880004dc31c0 ffffffffa048a9df ffffffff81e56380
 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[] bfad_iocmd_ioc_get_info+0x4f/0x220 [bfa]
[] bfad_iocmd_handler+0xa00/0xd40 [bfa]
[] bfad_im_bsg_request+0xee/0x1b0 [bfa]
[] fc_bsg_dispatch+0x10b/0x1b0 [scsi_transport_fc]
[] bsg_request_fn+0x11d/0x1c0
[] __blk_run_queue+0x2f/0x40
[] blk_execute_rq_nowait+0xa8/0x160
[] blk_execute_rq+0x77/0x120
[] bsg_ioctl+0x1b6/0x200
[] do_vfs_ioctl+0x2cd/0x4a0
[] SyS_ioctl+0x74/0x80
[] entry_SYSCALL_64_fastpath+0x12/0x6d

Fixes: cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoscsi: lpfc: Use after free in lpfc_rq_buf_free()
Dan Carpenter [Wed, 22 Nov 2017 08:58:03 +0000 (11:58 +0300)]
scsi: lpfc: Use after free in lpfc_rq_buf_free()

[ Upstream commit 9816ef6ecbc102b9bcbb1d83e12c7fb19924f38c ]

The error message dereferences "rqb_entry" so we need to print it first
and then free the buffer.

Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agogianfar: Disable EEE autoneg by default
Claudiu Manoil [Thu, 7 Dec 2017 16:44:23 +0000 (18:44 +0200)]
gianfar: Disable EEE autoneg by default

[ Upstream commit b6b5e8a691185606dfffff3198c89e3b4fd9d4f6 ]

This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Tested-by: Yangbo Lu <Yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years ago509: fix printing uninitialized stack memory when OID is empty
Eric Biggers [Fri, 8 Dec 2017 15:13:28 +0000 (15:13 +0000)]
509: fix printing uninitialized stack memory when OID is empty

[ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ]

Callers of sprint_oid() do not check its return value before printing
the result.  In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed.  Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet: dsa: mv88e6xxx: Unregister MDIO bus on error path
Andrew Lunn [Thu, 7 Dec 2017 00:05:57 +0000 (01:05 +0100)]
net: dsa: mv88e6xxx: Unregister MDIO bus on error path

[ Upstream commit 3126aeec5313565bfa19e2dd8fd7e3c3390514cb ]

The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.

Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet: dsa: mv88e6xxx: Fix interrupt masking on removal
Andrew Lunn [Thu, 7 Dec 2017 00:05:56 +0000 (01:05 +0100)]
net: dsa: mv88e6xxx: Fix interrupt masking on removal

[ Upstream commit 3d5fdba1842bdd2eef29364c660558cb4cbb3fe0 ]

When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.

Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.

Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet: ethernet: arc: fix error handling in emac_rockchip_probe
Branislav Radocaj [Wed, 6 Dec 2017 23:07:38 +0000 (00:07 +0100)]
net: ethernet: arc: fix error handling in emac_rockchip_probe

[ Upstream commit e46772a6946a7d1f3fbbc1415871851d6651f1d4 ]

If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agovirtio_net: fix return value check in receive_mergeable()
Yunjian Wang [Mon, 4 Dec 2017 06:02:19 +0000 (14:02 +0800)]
virtio_net: fix return value check in receive_mergeable()

[ Upstream commit 03e9f8a05bce7330bcd9c5cc54c8e42d0fcbf993 ]

The function virtqueue_get_buf_ctx() could return NULL, the return
value 'buf' need to be checked with NULL, not value 'ctx'.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agobrcmfmac: Avoid build error with make W=1
Andy Shevchenko [Thu, 23 Nov 2017 15:57:04 +0000 (17:57 +0200)]
brcmfmac: Avoid build error with make W=1

[ Upstream commit 51ef7925e10688c57186d438e784532e063492e4 ]

When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for
the first run, all next ones are okay.

  CC [M]  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed

Seems like something happened with W=1 and wrong kernel doc format.
As a quick fix remove dubious /** in the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agobtrfs: Fix possible off-by-one in btrfs_search_path_in_tree
Nikolay Borisov [Fri, 1 Dec 2017 09:19:42 +0000 (11:19 +0200)]
btrfs: Fix possible off-by-one in btrfs_search_path_in_tree

[ Upstream commit c8bcbfbd239ed60a6562964b58034ac8a25f4c31 ]

The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.

Implications:

Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.

btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.

Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.

Before this patch the buffer was one byte larger, but then the -1 was
not added.

Fixes: ac8e9819d71f907 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoBtrfs: disable FUA if mounted with nobarrier
Omar Sandoval [Wed, 6 Dec 2017 06:54:02 +0000 (22:54 -0800)]
Btrfs: disable FUA if mounted with nobarrier

[ Upstream commit 1b9e619c5bc8235cfba3dc4ced2fb0e3554a05d4 ]

I was seeing disk flushes still happening when I mounted a Btrfs
filesystem with nobarrier for testing. This is because we use FUA to
write out the first super block, and on devices without FUA support, the
block layer translates FUA to a flush. Even on devices supporting true
FUA, using FUA when we asked for no barriers is surprising.

Fixes: 387125fc722a8ed ("Btrfs: fix barrier flushes")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agobtrfs: Fix quota reservation leak on preallocated files
Justin Maggard [Mon, 30 Oct 2017 22:29:10 +0000 (15:29 -0700)]
btrfs: Fix quota reservation leak on preallocated files

[ Upstream commit b430b7751286b3acff2d324553c8cec4f1e87764 ]

Commit c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
changed the behavior of __btrfs_buffered_write() so that it first tries
to get a data space reservation, and then skips the relatively expensive
nocow check if the reservation succeeded.

If we have quotas enabled, the data space reservation also includes a
quota reservation.  But in the rewrite case, the space has already been
accounted for in qgroups.  So btrfs_check_data_free_space() increases
the quota reservation, but it never gets decreased when the data
actually gets written and overwrites the pre-existing data.  So we're
left with both the qgroup and qgroup reservation accounting for the same
space.

This commit adds the missing btrfs_qgroup_free_data() call in the case
of BTRFS_ORDERED_PREALLOC extents.

Fixes: c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agolocking/lockdep: Fix possible NULL deref
Peter Zijlstra [Wed, 6 Dec 2017 16:32:47 +0000 (17:32 +0100)]
locking/lockdep: Fix possible NULL deref

[ Upstream commit 5e351ad106997e06b2dc3da9c6b939b95f67fb88 ]

We can't invalidate xhlocks when we've not yet allocated any.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: f52be5708076 ("locking/lockdep: Untangle xhlock history save/restore from task independence")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet: qualcomm: rmnet: Fix leak on transmit failure
Subash Abhinov Kasiviswanathan [Tue, 5 Dec 2017 20:41:17 +0000 (13:41 -0700)]
net: qualcomm: rmnet: Fix leak on transmit failure

[ Upstream commit c20a548792f15f8d8e38cd74356301c6db0d241f ]

If a skb in transmit path does not have sufficient headroom to add
the map header, the skb is not sent out and is never freed.

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoKVM: VMX: fix page leak in hardware_setup()
Jim Mattson [Fri, 1 Dec 2017 17:57:56 +0000 (09:57 -0800)]
KVM: VMX: fix page leak in hardware_setup()

[ Upstream commit 2895db67b01cb875457c9c3f30a14723b6b5dfd5 ]

vmx_io_bitmap_b should not be allocated twice.

Fixes: 23611332938d ("KVM: VMX: refactor setup of global page-sized bitmaps")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoVSOCK: fix outdated sk_state value in hvs_release()
Stefan Hajnoczi [Tue, 5 Dec 2017 11:31:14 +0000 (11:31 +0000)]
VSOCK: fix outdated sk_state value in hvs_release()

[ Upstream commit c9d3fe9da094a9a7a3d3cd365b334b822e05f5e8 ]

Since commit 3b4477d2dcf2709d0be89e2a8dced3d0f4a017f2 ("VSOCK: use TCP
state constants for sk_state") VSOCK has used TCP_* constants for
sk_state.

Commit b4562ca7925a3bedada87a3dd072dd5bad043288 ("hv_sock: add locking
in the open/close/release code paths") reintroduced the SS_DISCONNECTING
constant.

This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING
constant.

CC: Dexuan Cui <decui@microsoft.com>
CC: Cathy Avery <cavery@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet_sched: red: Avoid illegal values
Nogah Frankel [Mon, 4 Dec 2017 11:31:11 +0000 (13:31 +0200)]
net_sched: red: Avoid illegal values

[ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ]

Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.

Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet_sched: red: Avoid devision by zero
Nogah Frankel [Mon, 4 Dec 2017 11:31:10 +0000 (13:31 +0200)]
net_sched: red: Avoid devision by zero

[ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ]

Do not allow delta value to be zero since it is used as a divisor.

Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agogianfar: fix a flooded alignment reports because of padding issue.
Zumeng Chen [Mon, 4 Dec 2017 03:22:02 +0000 (11:22 +0800)]
gianfar: fix a flooded alignment reports because of padding issue.

[ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ]

According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonfp: fix port stats for mac representors
Pieter Jansen van Vuuren [Sat, 2 Dec 2017 05:37:23 +0000 (21:37 -0800)]
nfp: fix port stats for mac representors

[ Upstream commit 42d779ffc186f6dd26271fc60a7417cb51aca93e ]

Previously we swapped the tx_packets, tx_bytes and tx_dropped counters
with rx_packets, rx_bytes and rx_dropped counters, respectively. This
behaviour is correct and expected for VF representors but it should not
be swapped for physical port mac representors.

Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoARM: dts: Fix elm interrupt compiler warning
Tony Lindgren [Mon, 4 Dec 2017 16:27:17 +0000 (08:27 -0800)]
ARM: dts: Fix elm interrupt compiler warning

[ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ]

Looks like the interrupt property is missing the controller and level
information causing:

Warning (interrupts_property): interrupts size is (4), expected multiple
of 12 in /ocp/elm@48078000

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agos390/dasd: prevent prefix I/O error
Stefan Haberland [Thu, 26 Oct 2017 12:37:35 +0000 (14:37 +0200)]
s390/dasd: prevent prefix I/O error

[ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ]

Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agos390/virtio: add BSD license to virtio-ccw
Michael S. Tsirkin [Tue, 28 Nov 2017 14:11:29 +0000 (16:11 +0200)]
s390/virtio: add BSD license to virtio-ccw

[ Upstream commit edfb8d8fcb94a75b2e61c63549d4a5f6474ad3d2 ]

The original intent of the virtio header relicensing
from 2008 was to make sure anyone can implement compatible
devices/drivers. The virtio-ccw was omitted by mistake.

We have an ack from the only contributor as well as the
maintainer from IBM, so it's not too late to fix that.

Make it dual-licensed with GPLv2, as the whole kernel is GPL2.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoPM / runtime: Fix handling of suppliers with disabled runtime PM
Rafael J. Wysocki [Fri, 1 Dec 2017 13:58:34 +0000 (14:58 +0100)]
PM / runtime: Fix handling of suppliers with disabled runtime PM

[ Upstream commit 31eb7431805493e10f4731f366cf4d4e3e952035 ]

Prevent rpm_get_suppliers() from returning an error code if runtime
PM is disabled for one or more of the supplier devices it wants to
runtime-resume, so as to make runtime PM work for devices with links
to suppliers that don't use runtime PM (such links may be created
during device enumeration even before it is known whether or not
runtime PM will be enabled for the devices in question, for example).

Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agopowerpc/perf: Fix oops when grouping different pmu events
Ravi Bangoria [Thu, 30 Nov 2017 08:33:22 +0000 (14:03 +0530)]
powerpc/perf: Fix oops when grouping different pmu events

[ Upstream commit 5aa04b3eb6fca63d2e9827be656dcadc26d54e11 ]

When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:

    Faulting instruction address: 0x00000000
    [link register   ] c00000000010ce88 power_check_constraints+0x128/0x980
    ...
    c00000000010e238 power_pmu_event_init+0x268/0x6f0
    c0000000002dc60c perf_try_init_event+0xdc/0x1a0
    c0000000002dce88 perf_event_alloc+0x7b8/0xac0
    c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
    c00000000000b004 system_call+0x38/0xe0

'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.

Consider only those events which belongs to 'perf_hw_context' in
collect_events().

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agom68k: add missing SOFTIRQENTRY_TEXT linker section
Greg Ungerer [Tue, 14 Nov 2017 01:50:07 +0000 (11:50 +1000)]
m68k: add missing SOFTIRQENTRY_TEXT linker section

[ Upstream commit 969de0988b77e5a57aac2f7270191a3c50540c52 ]

Commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") added a new linker section, SOFTIRQENTRY_TEXT,
to the linker scripts for most architectures. It didn't add it to any of
the linker scripts for the m68k architecture. This was not really a problem
because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or
CONFIG_KASAN are enabled - which can never be true for m68k.

However commit 229a71860547 ("irq: Make the irqentry text section
unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on
m68k we now end up with a separate ELF section for .softirqentry.text
instead of it being part of the .text section. On some m68k targets in some
configurations this can also cause a fatal link error:

  LD      vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67]

To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker
scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section,
so this patch also adds an entry for that too.

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoipvlan: Add the skb->mark as flow4's member to lookup route
Gao Feng [Fri, 1 Dec 2017 01:58:42 +0000 (09:58 +0800)]
ipvlan: Add the skb->mark as flow4's member to lookup route

[ Upstream commit a98a4ebc8c61d20f0150d6be66e0e65223a347af ]

Current codes don't use skb->mark to assign flowi4_mark, it would
make the policy route rule with fwmark doesn't work as expected.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agobnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown
Ray Jui [Fri, 1 Dec 2017 08:13:02 +0000 (03:13 -0500)]
bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown

[ Upstream commit a7f3f939dd7d8398acebecd1ceb2e9e7ffbe91d2 ]

The current 'bnxt_shutdown' implementation only invokes
'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in
the path of power off (SYSTEM_POWER_OFF). While this may work in most
cases, it does not work in the smart NIC case, when Linux 'reboot'
command is initiated from the Linux that runs on the ARM cores of the
NIC card. In this particular case, Linux 'reboot' results in a system
'L3' level reset where the entire ARM and associated subsystems are
being reset, but at the same time, Nitro core is being kept in sane state
(to allow external PCIe connected servers to continue to work). Without
properly shutting down RoCE and freeing all associated resources, it
results in the ARM core to hang immediately after the 'reboot'

By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the
above issue

Fixes: 0efd2fc65c92 ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.")

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoscripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
Will Deacon [Wed, 29 Nov 2017 15:20:03 +0000 (15:20 +0000)]
scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none

[ Upstream commit e814bccbafece52a24e152d2395b5d49eef55841 ]

My bisect scripts starting running into build failures when trying to
compile 4.15-rc1 with the builds failing with things like:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!

The line in question is actually just a #define, but after some digging
it turns out that my scripts pass W=1 and since commit 3a025e1d1c2ea
("Add optional check for bad kernel-doc comments") that results in
kernel-doc running on each source file. The file in question has a
badly formatted comment immediately before the #define:

/**
 * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
 * bus layer usage.
 */

which causes the regex in dump_struct to fail (lack of braces following
struct declaration) and kernel-doc returns 1, which causes the build
to fail.

Fix the issue by always returning 0 from kernel-doc when invoked with
-none. It successfully generates no documentation, and prints out any
issues.

Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoiio: fix kernel-doc build errors
Randy Dunlap [Mon, 30 Oct 2017 00:06:01 +0000 (17:06 -0700)]
iio: fix kernel-doc build errors

[ Upstream commit c175cb7cd953782bbf4e8bdf088ad61440d6dde5 ]

Fix build errors in kernel-doc notation. Symbols that end in '_'
have a special meaning, but adding a '*' makes them OK.

../drivers/iio/industrialio-core.c:635: ERROR: Unknown target name: "iio_val".
../drivers/iio/industrialio-core.c:642: ERROR: Unknown target name: "iio_val".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoiio: proximity: sx9500: Assign interrupt from GpioIo()
Andy Shevchenko [Fri, 3 Nov 2017 13:03:36 +0000 (15:03 +0200)]
iio: proximity: sx9500: Assign interrupt from GpioIo()

[ Upstream commit e53111ad5deaef98d8c18a9933ef1f5624c5979d ]

The commit 0f0796509c07

("iio: remove gpio interrupt probing from drivers that use a single interrupt")

removed custom IRQ assignment for the drivers which are enumerated via
ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as
GpioIo() resource and thus automatic IRQ allocation will fail.

Partially revert the commit 0f0796509c07 to restore original behaviour.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomd/raid1/10: add missed blk plug
Shaohua Li [Fri, 1 Dec 2017 20:12:34 +0000 (12:12 -0800)]
md/raid1/10: add missed blk plug

[ Upstream commit 18022a1bd3709b74ca31ef0b28fccd52bcd6c504 ]

flush_pending_writes isn't always called with block plug, so add it, and plug
works in nested way.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agophylink: ensure we take the link down when phylink_stop() is called
Russell King [Thu, 30 Nov 2017 13:59:26 +0000 (13:59 +0000)]
phylink: ensure we take the link down when phylink_stop() is called

[ Upstream commit 2012b7d6b2868c532f22d9172c8b24611637eb48 ]

Ensure that we tell the MAC to take the link down when phylink_stop()
is called, and that this completes prior to phylink_stop() returns.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agosfp: fix RX_LOS signal handling
Russell King [Thu, 30 Nov 2017 13:59:11 +0000 (13:59 +0000)]
sfp: fix RX_LOS signal handling

[ Upstream commit acf1c02f023926b8b04672a9e81b1711ae681619 ]

The options word is a be16 quantity, so we need to test the flags
having converted the endian-ness.  Convert the flag bits to be16,
which can be optimised by the compiler, rather than converting a
variable at runtime.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agosctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune
Xin Long [Sat, 25 Nov 2017 13:18:34 +0000 (21:18 +0800)]
sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune

[ Upstream commit d30fc5126efb0c33b7adf5966d3051db2c3d7721 ]

Now outstanding_bytes is only increased when appending chunks into one
packet and sending it at 1st time, while decreased when it is about to
move into retransmit queue. It means outstanding_bytes value is already
decreased for all chunks in retransmit queue.

However sctp_prsctp_prune_sent is a common function to check the chunks
in both transmitted and retransmit queue, it decrease outstanding_bytes
when moving a chunk into abandoned queue from either of them.

It could cause outstanding_bytes underflow, as it also decreases it's
value for the chunks in retransmit queue.

This patch fixes it by only updating outstanding_bytes for transmitted
queue when pruning queues for prsctp prio policy, the same fix is also
needed in sctp_check_transmitted.

Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomd/raid5: correct degraded calculation in raid5_error
bingjingc [Fri, 17 Nov 2017 02:57:44 +0000 (10:57 +0800)]
md/raid5: correct degraded calculation in raid5_error

[ Upstream commit aff69d89bdebc39235cddb4445371eb979b49685 ]

When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).

mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure

cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.

However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.

Reported-by: Roy Chung <roychung@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoIB/core: Init subsys if compiled to vmlinuz-core
Dmitry Monakhov [Mon, 27 Nov 2017 13:39:05 +0000 (13:39 +0000)]
IB/core: Init subsys if compiled to vmlinuz-core

[ Upstream commit a9cd1a673737dd81332fce1145801bfacfb90d90 ]

Once infiniband is compiled as a core component its subsystem must be
enabled before device initialization. Otherwise there is a NULL pointer
dereference during mlx4_core init, calltrace:
->device_add
  if (dev->class) {
     deref  dev->class->p =>NULLPTR

#Config
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
CONFIG_MLX4_EN=y

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoRDMA/cma: Make sure that PSN is not over max allowed
Moni Shoua [Sun, 26 Nov 2017 18:23:54 +0000 (20:23 +0200)]
RDMA/cma: Make sure that PSN is not over max allowed

[ Upstream commit 23a9cd2ad90543e9da3786878d2b2729c095439d ]

This patch limits the initial value for PSN to 24 bits as
spec requires.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoi40iw: Correct ARP index mask
Mustafa Ismail [Tue, 21 Nov 2017 22:18:32 +0000 (16:18 -0600)]
i40iw: Correct ARP index mask

[ Upstream commit a283cdc4d3670700182c820b59078387f9a01a30 ]

The ARP table entry indexes are aliased to 12bits
instead of the intended 16bits when uploaded to
the QP Context. This will present an issue when the
number of connections exceeds 4096 as ARP entries are
reused. Fix this by adjusting the mask to account for
the full 16bits.

Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoi40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE
Mustafa Ismail [Tue, 21 Nov 2017 22:18:31 +0000 (16:18 -0600)]
i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE

[ Upstream commit 10499986dbd8778e1acf9f9d2e166800dfee44b4 ]

When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and
it should not be freed as one in i40iw_schedule_cm_timer().

Fixes: f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoi40iw: Allocate a sdbuf per CQP WQE
Chien Tin Tung [Tue, 21 Nov 2017 22:18:30 +0000 (16:18 -0600)]
i40iw: Allocate a sdbuf per CQP WQE

[ Upstream commit 100d6de2ced538c539d923dc14a1b5cbae234503 ]

Currently there is only one sdbuf per Control QP (CQP) for
programming Segment Descriptor (SD). If multiple SD work
requests are posted simultaneously, the sdbuf is reused
by all WQEs and new WQEs can corrupt previous WQEs sdbuf
leading to incorrect SD programming.

Fix this by allocating one sdbuf per CQP SQ WQE. When an
SD command is posted, it will use the corresponding sdbuf
for the WQE.

Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls")
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoKVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner
Marc Zyngier [Thu, 30 Nov 2017 17:00:30 +0000 (17:00 +0000)]
KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner

[ Upstream commit 7465894e90e5a47e0e52aa5f1f708653fc40020f ]

vgic_set_owner acquires the irq lock without disabling interrupts,
resulting in a lockdep splat (an interrupt could fire and result
in the same lock being taken if the same virtual irq is to be
injected).

In practice, it is almost impossible to trigger this bug, but
better safe than sorry. Convert the lock acquisition to a
spin_lock_irqsave() and keep lockdep happy.

Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomeson-gx-socinfo: Fix package id parsing
Arnaud Patard [Wed, 29 Nov 2017 15:09:46 +0000 (16:09 +0100)]
meson-gx-socinfo: Fix package id parsing

[ Upstream commit 044d71bc6cdee8980d0fdc35ec79a0d5818b2ce3 ]

I've noticed the following message while booting a S905X based board:

soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected

The S905D string is obviously wrong. The vendor code does:
...
        ver = (readl(assist_hw_rev) >> 8) & 0xff;
        meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver;
        ver =  (readl(assist_hw_rev) >> 16) & 0xff;
        meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver;
...

while the current code does:
...
...

This means that the current mainline code has package id and minor
version reversed.

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoIB/hfi1: Initialize bth1 in 16B rc ack builder
Dennis Dalessandro [Tue, 14 Nov 2017 12:34:23 +0000 (04:34 -0800)]
IB/hfi1: Initialize bth1 in 16B rc ack builder

[ Upstream commit 8935780b9f7bbad0f2eb5dd43f61ba7b509a1575 ]

It is possible the bth1 variable could be used uninitialized so going
ahead and giving it a default value.

Otherwise we leak stack memory to the network.

Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agopinctrl: sunxi: Fix A64 UART mux value
Andre Przywara [Sat, 25 Nov 2017 12:12:30 +0000 (12:12 +0000)]
pinctrl: sunxi: Fix A64 UART mux value

[ Upstream commit 7c5c2c2d18d778e51fd8b899965097168306031c ]

To use pin PF4 as the RX signal of UART0, we have to write 0b011 into
the respective pin controller register.
Fix the wrong value we had in our table so far.

Fixes: 96851d391d02 ("drivers: pinctrl: add driver for Allwinner A64 SoC")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agopinctrl: sunxi: Fix A80 interrupt pin bank
Andre Przywara [Sat, 25 Nov 2017 12:19:48 +0000 (12:19 +0000)]
pinctrl: sunxi: Fix A80 interrupt pin bank

[ Upstream commit 6ad4cc8d1ac483e0fd33f605fb2788b0ecf51ed4 ]

On the A80 the pins on port B can trigger interrupts, and those are
assigned to the second interrupt bank.
Having two pins assigned to the same interrupt bank/pin combination does
not look healthy (instead more like a copy&paste bug from pins PA14-PA16),
so fix the interrupt bank for pins PB14-PB16, which is actually 1.

I don't have any A80 board, so could not test this.

Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agogpio: davinci: Assign first bank regs for unbanked case
Keerthy [Fri, 10 Nov 2017 11:13:17 +0000 (16:43 +0530)]
gpio: davinci: Assign first bank regs for unbanked case

[ Upstream commit 7f8e2a85c1b0bd440ffe87be82c79fdc319e8291 ]

As per the re-design assign the first bank regs for unbanked
irq case. This was missed out in the original patch.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixes: b5cf3fd827d2e1 ("gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agogpio: 74x164: Fix crash during .remove()
Geert Uytterhoeven [Tue, 21 Nov 2017 14:18:10 +0000 (15:18 +0100)]
gpio: 74x164: Fix crash during .remove()

[ Upstream commit a158531f3c92467df0e93e000d58185acae78a6e ]

Commit 7ebc194d0fd4bb0f ("gpio: 74x164: Introduce 'enable-gpios'
property") added a new member gpiod_oe to the end of the struct
gen_74x164_chip, after the zero-length buffer array.

However, this buffer is a flexible array, allocated together with the
structure during .probe().  As the buffer is no longer the last member,
writing to it corrupts the newly added member after it.
During device removal, the corrupted member will be used as a pointer,
leading to a crash.

This went unnoticed, as the flexible array was declared as "buffer[0]"
instead of "buffer[]", and thus did not trigger a "flexible array member
not at end of struct" error from gcc.

Move the gpiod_oe field up to fix this, and drop the zero from the array
size to prevent future similar bugs.

Fixes: 7ebc194d0fd4bb0f ("gpio: 74x164: Introduce 'enable-gpios' property")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agonet: mvpp2: allocate zeroed tx descriptors
Yan Markman [Thu, 30 Nov 2017 09:49:46 +0000 (10:49 +0100)]
net: mvpp2: allocate zeroed tx descriptors

[ Upstream commit a154f8e399a063137fc42b961f437248d55ece29 ]

Reserved and unused fields in the Tx descriptors should be 0. The PPv2
driver doesn't clear them at run-time (for performance reasons) but
these descriptors aren't zeroed when allocated, which can lead to
unpredictable behaviors. This patch fixes this by using
dma_zalloc_coherent instead of dma_alloc_coherent.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomedia: ov13858: Select V4L2_FWNODE
Sakari Ailus [Sun, 5 Nov 2017 22:51:00 +0000 (17:51 -0500)]
media: ov13858: Select V4L2_FWNODE

[ Upstream commit fce8ba670b7418319da14a6fc6668db1f1a96267 ]

The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.

Fixes: 5fcf092e0c9f ("[media] ov13858: add support for OV13858 sensor")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomedia: s5k6aa: describe some function parameters
Mauro Carvalho Chehab [Wed, 29 Nov 2017 13:44:41 +0000 (08:44 -0500)]
media: s5k6aa: describe some function parameters

[ Upstream commit 070250a1715cee2297de0d9e7e2cea58be999d37 ]

as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agotrace/xdp: fix compile warning: 'struct bpf_map' declared inside parameter list
Xie XiuQi [Thu, 30 Nov 2017 01:41:29 +0000 (09:41 +0800)]
trace/xdp: fix compile warning: 'struct bpf_map' declared inside parameter list

[ Upstream commit 23721a755f98ac846897a013c92cccb281c1bcc8 ]

We meet this compile warning, which caused by missing bpf.h in xdp.h.

In file included from ./include/trace/events/xdp.h:10:0,
                 from ./include/linux/bpf_trace.h:6,
                 from drivers/net/ethernet/intel/i40e/i40e_txrx.c:29:
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
    const struct bpf_map *map, u32 map_index),
                 ^
./include/linux/tracepoint.h:187:34: note: in definition of macro ‘__DECLARE_TRACE’
  static inline void trace_##name(proto)    \
                                  ^~~~~
./include/linux/tracepoint.h:352:24: note: in expansion of macro ‘PARAMS’
  __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),  \
                        ^~~~~~
./include/linux/tracepoint.h:477:2: note: in expansion of macro ‘DECLARE_TRACE’
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
  ^~~~~~~~~~~~~
./include/linux/tracepoint.h:477:22: note: in expansion of macro ‘PARAMS’
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
                      ^~~~~~
./include/trace/events/xdp.h:89:1: note: in expansion of macro ‘DEFINE_EVENT’
 DEFINE_EVENT(xdp_redirect_template, xdp_redirect,
 ^~~~~~~~~~~~
./include/trace/events/xdp.h:90:2: note: in expansion of macro ‘TP_PROTO’
  TP_PROTO(const struct net_device *dev,
  ^~~~~~~~
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
    const struct bpf_map *map, u32 map_index),
                 ^
./include/linux/tracepoint.h:203:38: note: in definition of macro ‘__DECLARE_TRACE’
  register_trace_##name(void (*probe)(data_proto), void *data) \
                                      ^~~~~~~~~~
./include/linux/tracepoint.h:354:4: note: in expansion of macro ‘PARAMS’
    PARAMS(void *__data, proto),   \
    ^~~~~~

Reported-by: Huang Daode <huangdaode@hisilicon.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Fixes: 8d3b778ff544 ("xdp: tracepoint xdp_redirect also need a map argument")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agokvm: arm: don't treat unavailable HYP mode as an error
Ard Biesheuvel [Tue, 28 Nov 2017 15:18:19 +0000 (15:18 +0000)]
kvm: arm: don't treat unavailable HYP mode as an error

[ Upstream commit 58d0d19a204604ca0da26058828a53558b265da3 ]

Since it is perfectly legal to run the kernel at EL1, it is not
actually an error if HYP mode is not available when attempting to
initialize KVM, given that KVM support cannot be built as a module.
So demote the kvm_err() to kvm_info(), which prevents the error from
appearing on an otherwise 'quiet' console.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agopinctrl: denverton: Fix UART2 RTS pin mode
Andy Shevchenko [Fri, 10 Nov 2017 17:55:18 +0000 (19:55 +0200)]
pinctrl: denverton: Fix UART2 RTS pin mode

[ Upstream commit 4bd6683da2e64590bdc27ecf7e61ad8376861768 ]

UART2 RTS is mode 2 of the pin.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoperf test: Fix test 21 for s390x
Thomas Richter [Thu, 23 Nov 2017 11:46:11 +0000 (12:46 +0100)]
perf test: Fix test 21 for s390x

[ Upstream commit 996548499df61babae5306544c7daf5fd39db31c ]

Test case 21 (Number of exit events of a simple workload) fails on
s390x. The reason is the invalid sample frequency supplied for this
test. On s390x the minimum sample frequency is much higher (see output
of /proc/service_levels).

Supply a save sample frequency value for s390x to fix this.  The value
will be adjusted by the s390x CPUMF frequency convertion function to a
value well below the sysctl kernel.perf_event_max_sample_rate value.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LPU-Reference: 20171123114611.93397-1-tmricht@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-1ynblyhi1n81idpido59nt1y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoperf bench numa: Fixup discontiguous/sparse numa nodes
Satheesh Rajendran [Wed, 22 Nov 2017 16:43:53 +0000 (22:13 +0530)]
perf bench numa: Fixup discontiguous/sparse numa nodes

[ Upstream commit 321a7c35c90cc834851ceda18a8ee18f1d032b92 ]

Certain systems are designed to have sparse/discontiguous nodes.  On
such systems, 'perf bench numa' hangs, shows wrong number of nodes and
shows values for non-existent nodes. Handle this by only taking nodes
that are exposed by kernel to userspace.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>