Daniel Stenberg [Tue, 21 Sep 2010 14:41:14 +0000 (16:41 +0200)]
duphandle: use ares_dup()
curl_easy_duphandle() was not properly duping the ares channel. The
ares_dup() function was introduced in c-ares 1.6.0 so by starting to use
this function we also raise the bar and require c-ares >= 1.6.0
(released Dec 9, 2008) for such builds.
Reported by: Ning Dong
Bug: http://curl.haxx.se/mail/lib-2010-08/0318.html
Hendrik Visage [Mon, 20 Sep 2010 22:07:45 +0000 (00:07 +0200)]
MacOSX-Framework: updates for Snowleopard
1) PPC64 appears to be an 10.5 only supported architecture, so I
forced 10.5 for 64bit if there is a need for PPC64, else 64bit only
does x86_64
2) proper "make clean" after every ./configure. fixes a bug where
subsequent runs the 32bit do not get compiled
3) Added a version numbering curl-$VERSION} rather than the "stock standard" A
Daniel Stenberg [Mon, 20 Sep 2010 22:02:10 +0000 (00:02 +0200)]
RELEASE-NOTES: synced with
5fcc4332d62fe
Removed the duplicate entry of Kamil in the credits.
Daniel Stenberg [Mon, 20 Sep 2010 21:20:36 +0000 (23:20 +0200)]
configure: don't enable RTMP if the lib detect fails
librtmp is often statically linked and using sub dependencies like
OpenSSL, so we need to make sure we can actually link with it properly
before enabling it. Otherwise we easily end up trying to link with a
RTMP lib that fails.
Daniel Stenberg [Mon, 20 Sep 2010 21:19:51 +0000 (23:19 +0200)]
TODO: added 8.4 non-gcrypt under GnuTLS
We must not assume gcrypt just because of GnuTLS
Daniel Stenberg [Mon, 20 Sep 2010 21:05:23 +0000 (23:05 +0200)]
configure: check for gcrypt if using GnuTLS
1 - libcurl assumes that there are gcrypt functions available when
GnuTLS is.
2 - GnuTLS can be built to use libnettle instead as crypto library,
which breaks assumption (1)
This change makes configure make sure that if GnuTLS is requested and
detected, it also makes sure that gcrypt is present or it errors
out. This is mostly a way to make the user more aware of this flaw, the
correct fix would be to detect which crypto layer that is in use and
adapt our code to use that instead of blindly assuming gcrypt.
Reported by: Michal Gorny
Bug: http://curl.haxx.se/bug/view.cgi?id=3071038
Daniel Stenberg [Sat, 18 Sep 2010 21:16:07 +0000 (23:16 +0200)]
RELEASE-NOTES: sync from
d2a7fd2fe65b to HEAD
Daniel Stenberg [Sat, 18 Sep 2010 21:08:32 +0000 (23:08 +0200)]
FTP: fix bad check of Curl_timeleft() return code
When it returns 0 it means no timeout. Only a negative value means that
we're out of time.
Daniel Stenberg [Sat, 18 Sep 2010 20:50:04 +0000 (22:50 +0200)]
LDAP: moved variable declaration to avoid compiler warn
If built without HTTP or proxy support it would cause a compiler warning
due to the unused variable. I moved the declaration of it into the only
scope it is used.
Tor Arntsen [Sat, 18 Sep 2010 12:16:49 +0000 (14:16 +0200)]
LDAP: Use FALSE instead of bool_false when setting bits.close
bool_false is the internal name used in the setup_once.h definition
we fall back to for non-C99 non-stdbool systems, it's not the actual
name to use in assignments (we use bool_false, bool_true there to
avoid global namespace problems, see comment in setup_once.h).
The correct C99 value to use is 'false', but let's use FALSE as
used elsewhere when assigning to bits.close. FALSE is set equal
to 'false' in setup_once.h when possible.
This fixes a build problem on C99 targets.
Tor Arntsen [Sat, 18 Sep 2010 12:15:52 +0000 (14:15 +0200)]
LDAP: Add missing declaration for 'result'
Mauro Iorio [Fri, 17 Sep 2010 22:03:23 +0000 (00:03 +0200)]
LDAP: Support for tunnelling queries through HTTP proxy
As of curl-7.21.1 tunnelling ldap queries through HTTP Proxies is not
supported. Actually if --proxytunnel command-line option (or equivalent
CURLOPT_HTTPPROXYTUNNEL) is used for ldap queries like
ldap://ldap.my.server.com/... You are unable to successfully execute the
query. In facts ldap_*_bind is executed directly against the ldap server
and proxy is totally ignored. This is true for both openLDAP and
Microsoft LDAP API.
Step to reproduce the error:
Just launch "curl --proxytunnel --proxy 192.168.1.1:8080
ldap://ldap.my.server.com/dc=... "
This fix adds an invocation to Curl_proxyCONNECT against the provided
proxy address and on successful "CONNECT" it tunnels ldap query to the
final ldap server through the HTTP proxy. As far as I know Microsoft
LDAP APIs don't permit tunnelling in any way so the patch provided is
for OpenLDAP only. The patch has been developed against OpenLDAP 2.4.23
and has been tested with Microsoft ISA Server 2006 and works properly
with basic, digest and NTLM authentication.
Daniel Stenberg [Fri, 17 Sep 2010 21:02:33 +0000 (23:02 +0200)]
timeout: use the correct start value as offset
Rodric provide an awesome recipe that proved libcurl didn't timeout at
the requested time - it instead often timed out at [connect time] +
[timeout time] instead of the documented and intended [timeout time]
only. This bug was due to the code using the wrong base offset when
comparing against "now". I could also take the oppurtinity to simplify
the code by properly using of the generic help function for this:
Curl_timeleft.
Reported by: Rodric Glaser
Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
Daniel Stenberg [Fri, 17 Sep 2010 20:58:08 +0000 (22:58 +0200)]
Curl_timeleft: avoid returning "no timeout" by mistake
As this function uses return code 0 to mean that there is no timeout, it
needs to check that it doesn't return a time left value that is exactly
zero. It could lead to libcurl doing an extra 1000 ms select() call and
thus not timing out as accurately as it should.
I fell over this bug when working on the bug 3061535 but this fix does
not correct that problem alone, although this is a problem that needs to
be fixed.
Reported by: Rodric Glaser
Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
Daniel Stenberg [Thu, 16 Sep 2010 21:32:24 +0000 (23:32 +0200)]
whitespace: unified source
if ( => if(
while ( => while(
and some other changes in the similar spirit, trying to make the
whole file use the same style
Daniel Stenberg [Thu, 16 Sep 2010 21:27:03 +0000 (23:27 +0200)]
remote-header-name: don't output filename when NULL
James Bursa [Wed, 15 Sep 2010 14:43:48 +0000 (16:43 +0200)]
TheArtOfHttpScripting: use long options
James Bursa [Tue, 14 Sep 2010 20:52:04 +0000 (22:52 +0200)]
getinmemory: make the example easier to follow
1. Remove the comment warning that it's "not been verified to work". It
works with no problems in my testing.
2. Remove 2 unnecessary includes.
3. Remove the myrealloc(). Initialize chunk.memory with malloc() instead
of NULL. The comments for these two parts contradicted each other.
4. Handle out of memory from realloc() instead of continuing.
5. Print a brief status message at the end.
Daniel Stenberg [Tue, 14 Sep 2010 20:40:05 +0000 (22:40 +0200)]
multi: don't do extra expire calls for the connection
The timeout is set for the connect phase already at the start of the
request so we should not add a new one, and we MUST not set expire to 0
as that will remove any other potentially existing timeouts.
Peter Pentchev [Sun, 12 Sep 2010 20:47:55 +0000 (23:47 +0300)]
Fix a bashism: test a = b is more portable than ==.
Daniel Stenberg [Sun, 12 Sep 2010 14:37:55 +0000 (16:37 +0200)]
glob_word: remove a check that is always false
Daniel Stenberg [Sun, 12 Sep 2010 14:34:16 +0000 (16:34 +0200)]
inflate_stream: remove redundant check that is always true
Daniel Stenberg [Fri, 10 Sep 2010 07:22:33 +0000 (09:22 +0200)]
digest: make it clear the condition is always true
Daniel Stenberg [Fri, 10 Sep 2010 07:20:59 +0000 (09:20 +0200)]
ssluse: removed redundant check that is always true
Dan Fandrich [Sun, 12 Sep 2010 00:04:05 +0000 (17:04 -0700)]
Link curl and the test apps with -lrt explicitly when necessary
When curl calls a function from that library then it needs to
explicitly link to the library instead of piggybacking on
libcurl's own dependency. Without this, GNU ld with the
--no-add-needed flag fails when linking (which Fedora now does
by default).
Reported by: Quanah Gibson-Mount
Bug: http://curl.haxx.se/mail/lib-2010-09/0085.html
Dan Fandrich [Thu, 9 Sep 2010 19:38:15 +0000 (12:38 -0700)]
Mention the Debian Popularity Contest
Tor Arntsen [Thu, 9 Sep 2010 10:26:36 +0000 (12:26 +0200)]
test565: Don't hardcode IP:PORT
Use %HOSTIP:%HTTPPORT instead of 127.0.0.1:8990 so that
verification works if the baseport change option is used
when executing runtests.pl.
Daniel Stenberg [Wed, 8 Sep 2010 22:04:55 +0000 (00:04 +0200)]
curl.1: updated protocols and polished language
Daniel Stenberg [Wed, 8 Sep 2010 21:23:19 +0000 (23:23 +0200)]
FAQ: CURL_STATICLIB for visual studio users
Clarified as it isn't used with a -D option for them.
Reported by: Artfunkel
Bug: http://curl.haxx.se/bug/view.cgi?id=3060381
Daniel Stenberg [Tue, 7 Sep 2010 17:05:07 +0000 (19:05 +0200)]
FAQ: updated and added host with custom IP question
Added "3.19 How do I get HTTP from a host using a specific IP address?"
and updated some stuff about certs etc.
Daniel Stenberg [Tue, 7 Sep 2010 16:22:54 +0000 (18:22 +0200)]
chunky parser: only rewind if needed
The code reading chunked encoding attempts to rewind the code if it had
read more data than the chunky parser consumes. The rewinding can fail
and it will then cause an error. This change now makes the rewinding
only happen if pipelining is in use - as that's the only time it really
needs to be done.
Bug: http://curl.haxx.se/mail/lib-2010-08/0297.html
Reported by: Ron Parker
Kamil Dudka [Mon, 6 Sep 2010 14:03:37 +0000 (16:03 +0200)]
rtsp: avoid SIGSEGV on malformed header
Kamil Dudka [Mon, 6 Sep 2010 13:31:01 +0000 (15:31 +0200)]
rtsp: avoid SIGSEGV on malformed header
Daniel Stenberg [Sun, 5 Sep 2010 22:18:58 +0000 (00:18 +0200)]
warning: fix conversion to 'int' from 'size_t'
Daniel Stenberg [Sun, 5 Sep 2010 22:02:54 +0000 (00:02 +0200)]
portabilty: use proper variable type to hold sockets
Curl_getconnectinfo() is changed to return a proper curl_socket_t for
the last socket so that it'll work more portably (and cause less
compiler warnings).
Guenter Knauf [Fri, 3 Sep 2010 18:35:34 +0000 (20:35 +0200)]
Trial to fix another compiler warning with braces.
Dan Fandrich [Fri, 3 Sep 2010 04:12:14 +0000 (21:12 -0700)]
Use checkprefix() to compare protocol-specific strings
Otherwise, there could be problems running in certain locales.
Guenter Knauf [Thu, 2 Sep 2010 02:37:13 +0000 (04:37 +0200)]
Moved S_ISREG define to setup as suggested by Dan.
Guenter Knauf [Wed, 1 Sep 2010 22:38:16 +0000 (00:38 +0200)]
Use own typedef as workaround for broken sspi.h header (f.e. Watcom).
Guenter Knauf [Wed, 1 Sep 2010 22:22:41 +0000 (00:22 +0200)]
Added some hacks in order to build with VC from git.
Adam Light posted this patch to the list which enables builds from
git with VC versions other than vc6; also he added a vc10 target.
Guenter Knauf [Wed, 1 Sep 2010 22:07:05 +0000 (00:07 +0200)]
Added S_ISREG define for Win32.
Daniel Stenberg [Wed, 1 Sep 2010 14:52:23 +0000 (16:52 +0200)]
multi: fixes for timing out handles
Add a timeout check for handles in the state machine so that they will
timeout in all states disregarding what actions that may or may not
happen.
Fixed a bug in socket_action introduced recently when looping over timed
out handles: it wouldn't assign the 'data' variable and thus it wouldn't
properly take care of handles.
In the update_timer function, the code now checks if the timeout has
been removed and then it tells the application. Previously it would
always let the remaining timeout(s) just linger to expire later on.
Daniel Stenberg [Wed, 1 Sep 2010 14:47:42 +0000 (16:47 +0200)]
threaded resolver: no more expire 0 calls
Curl_expire() set to 0 expires ALL timeouts so it should only be called
if we truly and really want to remove all timeouts for the handle.
Daniel Stenberg [Wed, 1 Sep 2010 14:04:39 +0000 (16:04 +0200)]
resolve_server: simplify code
Make use of the helper function Curl_timeleft() instead of duplicating
code.
Daniel Stenberg [Mon, 30 Aug 2010 22:08:45 +0000 (00:08 +0200)]
multi: make sure the next timeout is used when one expires
Each easy handle has a list of timeouts, so as soon as the main timeout
for a handle expires, we must make sure to get the next entry from the
list and re-add the handle to the splay tree.
This was attempted previously but was done poorly in my commit
232ad6549a68450.
Dan Fandrich [Mon, 30 Aug 2010 22:07:21 +0000 (15:07 -0700)]
Added proxy keyword to allow skipping test in proxyless configs
Daniel Stenberg [Sat, 28 Aug 2010 22:16:34 +0000 (00:16 +0200)]
multi: set timeouts when transfer begins
When a new transfer is about to start we now set the proper timeouts to
expire for the multi interface if they are set for the handle. This is a
follow-up bugfix to make sure that easy handles timeout properly when
the times expire and the multi interface is used. This also improves
curl_multi_timeout().
Daniel Stenberg [Sat, 28 Aug 2010 21:07:21 +0000 (23:07 +0200)]
CURLOPT_DIRLISTONLY: don't use with CURLOPT_WILDCARDMATCH
Daniel Stenberg [Fri, 27 Aug 2010 21:15:45 +0000 (23:15 +0200)]
FAQ: update list of supported protocols
Fabian Keil [Thu, 19 Aug 2010 14:07:03 +0000 (16:07 +0200)]
In the m4 detection line, factor out the 2>dev/null
Fabian Keil [Thu, 19 Aug 2010 14:04:18 +0000 (16:04 +0200)]
If m4 doesn't support --version, try if gm4 does.
Fabian Keil [Thu, 19 Aug 2010 13:50:32 +0000 (15:50 +0200)]
If the m4 version isn't recognized at all, just say so
'm4 version found. You need a GNU m4 installed!' is a bit confusing.
Daniel Stenberg [Wed, 25 Aug 2010 20:57:11 +0000 (22:57 +0200)]
HISTORY: mention the gopher story
Dan Fandrich [Wed, 25 Aug 2010 23:43:26 +0000 (16:43 -0700)]
Tweaked some test data files
Fixed some issues that caused xmllint failures, added features
and keywords, fixed some quotes and removed some <strip> sections
that unnecessarily limited test checking.
Dan Fandrich [Wed, 25 Aug 2010 18:48:57 +0000 (11:48 -0700)]
Added new source files to Symbian and TPF makefiles
Daniel Stenberg [Wed, 25 Aug 2010 15:17:12 +0000 (17:17 +0200)]
RELEASE-NOTES: sync from
b980c9a02 to HEAD
Daniel Stenberg [Wed, 25 Aug 2010 13:56:35 +0000 (15:56 +0200)]
Makefile: add gopher.c file to build
As the VC and RISCOS makefiles don't use the .inc file
Daniel Stenberg [Wed, 25 Aug 2010 13:10:40 +0000 (15:10 +0200)]
runtests: fix uninitialized variable warning
Daniel Stenberg [Tue, 24 Aug 2010 22:56:14 +0000 (00:56 +0200)]
gopher tests: revert parts of gopher in the pingpong server
Introduced in the initial gopher commits, there was added logic to do
GOPHER test serving in the pingpong server but as it resembles HTTP much
more than FTP or SMTP, the gopher testing has been moved over to instead
use the sws (HTTP) server. This change simply removes unused code.
Daniel Stenberg [Tue, 24 Aug 2010 22:47:45 +0000 (00:47 +0200)]
gopher tests: use sws and adjusted to more standard style
Daniel Stenberg [Tue, 24 Aug 2010 22:45:52 +0000 (00:45 +0200)]
sws: added basic gopher support
Daniel Stenberg [Tue, 24 Aug 2010 22:45:17 +0000 (00:45 +0200)]
gopher: enable the header callback/verbosity
Daniel Stenberg [Tue, 24 Aug 2010 21:15:59 +0000 (23:15 +0200)]
gopher: fix test case line endings
Patches over email very easily lose CRLF line endings in files otherwise
LF-only so I had to put them back where needed.
Daniel Stenberg [Tue, 24 Aug 2010 21:14:00 +0000 (23:14 +0200)]
gopher: fix memory leak and busyloop
The fix for the busyloop really only is a temporary work-around. It
causes a BLOCKING behavior which is a NO-NO. This function should rather
be split up in a do and a doing piece where the pieces that aren't
possible to send now will be sent in the doing function repeatedly until
the entire request is sent.
Cameron Kaiser [Mon, 23 Aug 2010 21:30:59 +0000 (14:30 -0700)]
Gopher using Curl_write; test suite (4 tests)
Cameron Kaiser [Thu, 12 Aug 2010 16:25:43 +0000 (09:25 -0700)]
Remove url.c test
Cameron Kaiser [Thu, 12 Aug 2010 15:32:00 +0000 (08:32 -0700)]
Forgot gopher.h in Makefile.inc
Cameron Kaiser [Thu, 12 Aug 2010 14:55:48 +0000 (07:55 -0700)]
Gopher protocol support (initial release)
Daniel Stenberg [Wed, 25 Aug 2010 11:42:14 +0000 (13:42 +0200)]
http: handle trailer headers in all chunked responses
HTTP allows that a server sends trailing headers after all the chunks
have been sent WITHOUT signalling their presence in the first response
headers. The "Trailer:" header is only a SHOULD there and as we need to
handle the situation even without that header I made libcurl ignore
Trailer: completely.
Test case 1116 was added to verify this and to make sure we handle more
than one trailer header properly.
Reported by: Patrick McManus
Bug: http://curl.haxx.se/bug/view.cgi?id=3052450
Daniel Stenberg [Wed, 25 Aug 2010 07:20:08 +0000 (09:20 +0200)]
TODO: we now support RTMP
Daniel Stenberg [Wed, 25 Aug 2010 07:18:46 +0000 (09:18 +0200)]
TODO: done "NTLM with other crypto functions"
Since NTLM was made to work with the NSS API as well, the primary SSL
alternatives will be built with NTLM support in libcurl.
Daniel Stenberg [Wed, 25 Aug 2010 07:17:09 +0000 (09:17 +0200)]
TODO: fixed "Make curl_multi_info_read faster"
It is really fast now
Dan Fandrich [Tue, 24 Aug 2010 23:45:31 +0000 (16:45 -0700)]
Fixed a NULL pointer dereference in form posting
It was introduced in commit
eeb2cb05 along with the -F type=
change. Also fixed a typo in the name of the magic filename=
parameter. Tweaked tests 39 and 173 to better test this path.
Ben Greear [Tue, 24 Aug 2010 16:30:26 +0000 (18:30 +0200)]
multi: Fix compile warning on 64-bit systems
Dan Fandrich [Mon, 23 Aug 2010 22:07:14 +0000 (15:07 -0700)]
Mention PolarSSL in tutorial & add some URLs to INSTALL
Daniel Stenberg [Sun, 22 Aug 2010 22:36:11 +0000 (00:36 +0200)]
RESUME_FROM: clarify what ftp uploads do
The numerical value passed to CURLOPT_RESUME_FROM for FTP uploads is
interpreted and used as position where to resume the _reading_ of the
local file and it will "blindly" append that data on the remote
file. This was certainly not clear in the docs previously.
Reported by: catalin
Bug: http://curl.haxx.se/bug/view.cgi?id=3048174
Dirk Manske [Fri, 20 Aug 2010 22:29:35 +0000 (00:29 +0200)]
Curl_is_connected: use correct errno
The correctly extracted errno contents were mistakenly overwritten by a newer
value that wasn't the correct error value.
Bug: http://curl.haxx.se/mail/lib-2010-08/0242.html
Daniel Stenberg [Fri, 20 Aug 2010 22:21:24 +0000 (00:21 +0200)]
cmdline: make -F type= accept ;charset=
The -F option allows some custom parameters within the given string, and
those strings are separated with semicolons. You can for example specify
"name=daniel;type=text/plain" to set content-type for the
field. However, the use of semicolons like that made it not work fine if
you specified one within the content-type, like for:
"name=daniel;type=text/plain;charset=UTF-8"
... as the second one would be seen as a separator and "charset" is no
parameter curl knows anything about so it was just silently discarded.
The new logic now checks if the semicolon and following keyword looks
like a parameter it knows about and if it isn't it is assumed to be
meant to be used within the content-type string itself.
I modified test case 186 to verify that this works as intended.
Reported by: Larry Stone
Bug: http://curl.haxx.se/bug/view.cgi?id=3048988
Guenter Knauf [Fri, 20 Aug 2010 01:02:49 +0000 (03:02 +0200)]
Added mk-ca-bundle.vbs script.
The script works exactly same as the Perl one except for one thing:
when the text descriptions generated with openssl are included then
the md5 fingerprints are missing; seems openssl has either a bug or
a feature which prints the md5 fingerprint output to stdout instead
of writing them to specified file; this script could here do the same
as what the Perl scripr does (redirect stdout into file) but this
makes the script take up double the time because it needs to launch
cmd.exe 140 times (fo each openssl call). So I think for now we just
ommit the md5 fingerprints, and see if openssl will be fixed.
Guenter Knauf [Fri, 20 Aug 2010 00:33:29 +0000 (02:33 +0200)]
Trial to fix win32 autobuilds.
It seems that its time to look at some better ideas for the win32
non-configure builds; probably a prebuild target which copies
config-win32.h to curl_config.h and appends also then feature
defines like USE_ARES.
Dan Fandrich [Thu, 19 Aug 2010 18:45:54 +0000 (11:45 -0700)]
Use the S_ISREG macro to determine what is a regular file
Kamil Dudka [Thu, 19 Aug 2010 14:38:22 +0000 (16:38 +0200)]
AC_INIT: avoid a warning with autoconf 2.66
It was complaining about the '=>' operator, introduced in e3fc0d5.
Dan Fandrich [Thu, 19 Aug 2010 06:08:18 +0000 (23:08 -0700)]
Fixed a memory leak during OOM in the multi timeout code
Dan Fandrich [Thu, 19 Aug 2010 05:16:46 +0000 (22:16 -0700)]
Removed a C99ism & made an array const
Julien Chaffraix [Wed, 18 Aug 2010 22:27:04 +0000 (00:27 +0200)]
test: added test 579 to verify progress callback for chunked post
The 66 bytes checked are those 38 bytes with the chunked encoding
headers added: 8+8+10+35+5 = 66
The three-letter words become 8 bytes on the wire because they are sent
like: "3\r\none\r\n"
... and there's the trailing 5 bytes write after the four lines since
the final chunk is sent (which is "0\r\n\r\n").
Daniel Stenberg [Wed, 18 Aug 2010 17:59:46 +0000 (19:59 +0200)]
multi: avoid sending multiple complete messages
I fell over this bug report that mentioned that libcurl could wrongly
send more than one complete messages at the end of a transfer. Reading
the code confirmed this, so I've added a new multi state to make it not
happen. The mentioned bug report was made by Brad Jorsch but is (oddly
enough) filed in Debian's bug tracker for the "wmweather+" tool.
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593390
Daniel Stenberg [Wed, 18 Aug 2010 17:43:06 +0000 (19:43 +0200)]
FAQ: update the list of supported protocols
Daniel Stenberg [Wed, 18 Aug 2010 14:54:11 +0000 (16:54 +0200)]
FAQ: added blurb about ECCN
"1.13 curl's ECCN number" is a new section mostly made up from
Alessandro Vesely's very informative ML post on the subject:
http://curl.haxx.se/mail/lib-2008-03/0251.html
Guenter Knauf [Wed, 18 Aug 2010 14:08:20 +0000 (16:08 +0200)]
It is sufficient to pipe stderr to NUL to get rid of the nasty messages.
Guenter Knauf [Wed, 18 Aug 2010 13:16:10 +0000 (15:16 +0200)]
Added SSPI build to Watcom makefile.
Julien Chaffraix [Mon, 16 Aug 2010 20:54:19 +0000 (22:54 +0200)]
progress: callback for POSTs less than MAX_INITIAL_POST_SIZE
Add a call to Curl_pgrsSetUploadSize in this case valided by a test
case.
Reported by: Никита Дорохин.
Bug: http://curl.haxx.se/mail/lib-2010-04/0173.html
Dan Fandrich [Mon, 16 Aug 2010 20:36:04 +0000 (13:36 -0700)]
Make the LD_PRELOAD path absolute in the tests that use it
In some situations, libtool will change directories and perform
a link step before executing the libtest test app. Since
LD_PRELOAD is in effect for this entire process, the path to the
binary must be absolute so it will be valid no matter in which
directory the app is running.
Daniel Stenberg [Mon, 16 Aug 2010 20:19:38 +0000 (22:19 +0200)]
negotiation: Wrong proxy authorization
There's an error in http_negotiation.c where a mistake is using only
userpwd even for proxy requests. Ludek provided a patch, but I decided
to write the fix slightly different using his patch as inspiration.
Reported by: Ludek Finstrle
Bug: http://curl.haxx.se/bug/view.cgi?id=3046066
Dan Fandrich [Mon, 16 Aug 2010 19:09:18 +0000 (12:09 -0700)]
Clear stdout and stderr files on each test run
This allows a test to be run several times in the same test
session even when the -k option is given.
Guenter Knauf [Sun, 15 Aug 2010 14:55:02 +0000 (16:55 +0200)]
Syncroniszed vclean target; fixed some comments.
Daniel Stenberg [Sun, 15 Aug 2010 11:59:44 +0000 (13:59 +0200)]
THANKS: added contributors from 7.21.1
Daniel Stenberg [Sun, 15 Aug 2010 11:55:22 +0000 (13:55 +0200)]
multi: two fixes done
Daniel Stenberg [Tue, 10 Aug 2010 12:12:05 +0000 (14:12 +0200)]
multi: use timeouts properly for MAX_RECV/SEND_SPEED
When detecting that the send or recv speed, the multi interface changes
state to TOOFAST and previously there was no timeout set that would
force a recheck but it would rely on the application to somehow call
libcurl anyway. This now sets a timeout for a suitable future time to
check again if the average transfer speed is then below the threshold
again.
Daniel Stenberg [Tue, 10 Aug 2010 09:02:07 +0000 (11:02 +0200)]
multi: support timeouts
Curl_expire() is now expanded to hold a list of timeouts for each easy
handle. Only the closest in time will be the one used as the primary
timeout for the handle and will be used for the splay tree (which sorts
and lists all handles within the multi handle).
When the main timeout has triggered/expired, the next timeout in time
that is kept in the list will be moved to the main timeout position and
used as the key to splay with. This way, all timeouts that are set with
Curl_expire() internally will end up as a proper timeout. Previously any
Curl_expire() that set a _later_ timeout than what was already set was
just silently ignored and thus missed.
Setting Curl_expire() with timeout 0 (zero) will cancel all previously
added timeouts.
Corrects known bug #62.
Daniel Stenberg [Tue, 10 Aug 2010 08:52:26 +0000 (10:52 +0200)]
Curl_llist_insert_next: allow insertion first in the list
When we specify the "insert after" entry as NULL, this function now
inserts the new entry first in the list.