Arnd Bergmann [Fri, 3 Feb 2023 13:05:50 +0000 (14:05 +0100)]
Merge tag 'v6.2-next-dts32' of https://git./linux/kernel/git/matthias.bgg/linux into arm/dt
Clean ups only:
- deleting unsused pins-are-numbered property
- not existing second IRQ
* tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: dts: mediatek: Remove pins-are-numbered property
arm: dts: mt7629: Remove extra interrupt from timer node
Link: https://lore.kernel.org/r/17aee808-1f3f-fe75-68d4-adb71915e5cb@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Wed, 1 Feb 2023 15:48:40 +0000 (16:48 +0100)]
Merge tag 'zynq-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx into arm/dt
ARM: Zynq DT changes for v6.3
- Fix node names to be aligned with dt schema
- Describe qspi controller
- Use xlnx prefix for ethernet IP
* tag 'zynq-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Use recommended dma-controller name instead of dmac
ARM: dts: zynq: Add xlnx prefix to GEM compatible string
ARM: zynq: Comment interrupt names IRQs for pl330
ARM: dts: zynq: add QSPI controller node
Link: https://lore.kernel.org/r/850bb18f-ca22-f3d7-71a7-f367bfef4ccc@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Wed, 1 Feb 2023 15:46:55 +0000 (16:46 +0100)]
Merge tag 'zynqmp-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: ZynqMP SOC changes for v6.3
- Fix node names to be aligned with dt schema
- Rename DT overlay files to dtso
- Add snps,resume-hs-terminations to usb nodes
- Describe gpio-modepin node
- Use xlnx prefix for ethernet IP
* tag 'zynqmp-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zynqmp: Add xlnx prefix to GEM compatible string
arm64: dts: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsi
arm64: dts: zynqmp: Add mode-pin GPIO controller DT node
arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso
arm64: xilinx: Fix opp-table-cpu
arm64: dts: xilinx: align LED node names with dtschema
Link: https://lore.kernel.org/r/89d82a7e-6b42-97ce-2912-aa7dec965ff2@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 22:10:35 +0000 (23:10 +0100)]
Merge tag 'amlogic-arm-dt-for-v6.3' of https://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM mach-meson changes for v6.3:
- align OPP table names with DT schema
- meson8/8b: Add more L2 (PL310) cache properties
- align LED node names with dtschema
* tag 'amlogic-arm-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson8: align OPP table names with DT schema
ARM: dts: meson8b: Add more L2 (PL310) cache properties
ARM: dts: meson8: Add more L2 (PL310) cache properties
ARM: dts: meson: align LED node names with dtschema
Link: https://lore.kernel.org/r/61700737-c226-1c07-fba7-6dca896fdab4@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 22:07:32 +0000 (23:07 +0100)]
Merge tag 'amlogic-arm64-dt-for-v6.3' of https://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
arm64: dts: meson: add support for Radxa Zero2
dt-bindings: arm: amlogic: add support for Radxa Zero2
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: bananapi-m5: convert dts to dtsi
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
...
Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 22:05:14 +0000 (23:05 +0100)]
Merge tag 'imx-dt64-6.3' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 6.3:
- New board support: i.MX8MP Beacon Kit, Debix Model A Board,
Verdin Yavia boards.
- Add Flexcan and ADC support for i.MX93.
- A series from Krzysztof Kozlowski to align LED node names with
dtschema and use generic node name for rave-sp.
- Move PCIe controller clock setup from board dts to SoC dtsi.
- Add clock-cells to i.MX8MP hsio-blk-ctrl device.
- Add TMU phandle to calibration data in OCOTP for i.MX8M.
- Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM.
- Drop sd-vsel-gpios from i.MX8M Verdin SoM and DHCOM SoM.
- A series from Peng Fan to improve iomuxc-gpr device for i.MX8M.
- Declare IOMMU cache-coherent page table walk feature for LS1028A and
LS1088A.
- A few small corrections and random updates.
* tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
arm64: ls1046ardb: Use in-band-status for SFP module
arm64: dts: imx8mp-verdin: Add yavia carrier board
arm64: dts: imx8mm-verdin: Add yavia carrier board
arm64: dts: imx8q: use generic node name for rave-sp
arm64: dts: imx8mp-verdin-dev: Do not include dahlia dtsi
arm64: dts: imx8mm-verdin-dev: Do not include dahlia dtsi
arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus DHCOM SoM
arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM
arm64: dts: imx8mm: Drop sd-vsel-gpios from i.MX8M Mini Verdin SoM
arm64: dts: imx8mp: Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: Introduce imx8mp-beacon-kit
arm64: dts: imx8mm-evk: use correct gpio-expander compatible
arm64: dts: imx93: add ADC support
arm64: dts: imx8mp: Reorder clock to match fsl,imx6q-pcie.yaml
arm64: dts: imx8mq: Deduplicate PCIe clock-names property
arm64: dts: imx8mm: Deduplicate PCIe clock-names property
arm64: dts: verdin-imx8mp: unify gpio-key node name
arm64: dts: ls1028a: sl28: get MAC addresses from VPD
arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
...
Link: https://lore.kernel.org/r/20230130023947.11780-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 22:03:26 +0000 (23:03 +0100)]
Merge tag 'imx-dt-6.3' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree change for 6.3:
- New board support: SK-iMX53, DHCOM i.MX6ULL based boards.
- Increase MMC maximum frequency for i.MXRT1050.
- A series from Krzysztof Kozlowski to align LED node names with
dtschema, and use use generic node name for rave-sp device.
- Use new media bus type macros for i.MX device trees.
- A series from Marcel Ziswiler to improve gpio-key for Colibri and
Apalis device trees.
- A series from Marek Vasut to drop interrupt-names from dma-apb device.
- A series from Philippe Schenker to disable USB over-current for
Colibri and Apalis boards.
- A few other small corrections and random changes.
* tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board
ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
ARM: dts: imx7s: correct iomuxc gpr mux controller cells
ARM: dts: imx: use generic node name for rave-sp
ARM: dts: ls1021a: Disable CAN nodes by default
ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names
ARM: dts: colibri-imx6ull: improve wake-up with gpio key
ARM: dts: colibri-imx6: improve wake-up with gpio key
ARM: dts: imx: e70k02: Add touchscreen
ARM: dts: vfxxx: Swap SAI DMA order
ARM: dts: freescale: Use new media bus type macros
ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible
ARM: dts: imx: Add support for SK-iMX53 board
ARM: dts: imx7s: Drop dma-apb interrupt-names
ARM: dts: imx6ul: Drop dma-apb interrupt-names
ARM: dts: imx6sx: Drop dma-apb interrupt-names
ARM: dts: imx6qdl: Drop dma-apb interrupt-names
ARM: dts: mxs: Drop dma-apb interrupt-names
ARM: dts: imx6qdl: use MAC-address from nvmem
...
Link: https://lore.kernel.org/r/20230130023947.11780-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 22:02:26 +0000 (23:02 +0100)]
Merge tag 'imx-bindings-6.3' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 6.3:
- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
based boards.
* tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add verdin yavia carrier-board
dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM
dt-bindings: arm: Document the rest of i.MX28 based boards
dt-bindings: arm: fsl: Fix bindings for APF28Dev board
dt-bindings: power: fsl,imx-gpc: document interrupt-controller
dt-bindings: power: fsl,imx-gpc: correct compatibles
dt-bindings: power: fsl,imx-gpc: document fsl,imx6ul-gpc compatible
dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit
dt-bindings: arm: Move i.MX8MM Cloos PHG Board to TQM entry
dt-bindings: arm: Split i.MX8M Plus DHCOM based boards
dt-bindings: arm: Split i.MX8M Mini NITROGEN SoM based boards
dt-bindings: arm: Move MX8Menlo board to i.MX8M Mini Toradex Verdin SoM entry
dt-bindings: soc: imx: add IOMUXC GPR support
dt-bindings: arm: fsl: Add the Starterkit SK-iMX53 board
dt-bindings: vendor-prefixes: add Startkit
dt-bindings: soc: imx8mp-hsio-blk-ctrl: add clock cells
dt-bindings: arm: fsl: Enumerate Debix Model A Board
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
Link: https://lore.kernel.org/r/20230130023947.11780-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 22:01:11 +0000 (23:01 +0100)]
Merge tag 'dt-cleanup-6.3-2' of https://git./linux/kernel/git/krzk/linux-dt into arm/dt
Minor improvements in ARM DTS for v6.3, part two
Align UART node names and OPP table names with bindings (alpine, arm
boards, axm55xx, berlin, cx92755, dm814x, moxart, mstar, stih418).
* tag 'dt-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: berlin: align UART node name with bindings
ARM: dts: stih418: align OPP table names with DT schema
ARM: dts: dm814x: align UART node name with bindings
ARM: dts: moxart: align UART node name with bindings
ARM: dts: axm55xx: align UART node name with bindings
ARM: dts: alpine: align UART node name with bindings
ARM: dts: arm: align UART node name with bindings
ARM: dts: cx92755: align UART node name with bindings
ARM: dts: mstar: align UART node name with bindings
Link: https://lore.kernel.org/r/20230129144525.5802-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 21:59:59 +0000 (22:59 +0100)]
Merge tag 'dt64-cleanup-6.3-2' of https://git./linux/kernel/git/krzk/linux-dt into arm/dt
Minor improvements in ARM64 DTS for v6.3, part two
1. Drop deprecated "device_type" property from serial nodes (apm,
amazon).
2. Align UART node names and OPP table names with bindings (hisilicon,
realtek, synaptics).
3. Use "okay" for status, as expected by Devicetree specification and
dtschema.
* tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: amd: use "okay" for status
arm64: dts: apm: use "okay" for status
arm64: dts: microchip: use "okay" for status
arm64: dts: synaptics: align UART node name with bindings
arm64: dts: hisilicon: align UART node name with bindings
arm64: dts: realtek: align UART node name with bindings
arm64: dts: amazon: drop deprecated serial device_type
arm64: dts: apm: drop deprecated serial device_type
Link: https://lore.kernel.org/r/20230129144525.5802-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 21:58:28 +0000 (22:58 +0100)]
Merge tag 'samsung-dt64-6.3-2' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v6.3, part two
Big cleanup and rework towards achieving zero-warning of dtbs_check and
dtc W=1:
- drop or correct incorrect properties in several boards,
- add dummy regulator supplies when necessary to fullfil bindings
requirements,
- use lowercase hex,
- move non-MMIO exynos-bus nodes out of soc node,
- add unit address to USB DWC3 nodes.
* tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433
arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433
arm64: dts: exynos: use lowercase hex addresses
arm64: dts: exynos: correct wlf,micd-dbtime on TM2
arm64: dts: exynos: add interrupt-controller to WM5110 on TM2
arm64: dts: exynos: add VPH_PWR regulator on TM2
arm64: dts: exynos: correct Bluetooth LED triger on E850-96
arm64: dts: exynos: add ADC supply on Exynos7 Espresso
arm64: dts: exynos: disable non-working GPU on Exynos7 Espresso
arm64: dts: exynos: drop unsupported UFS properties in ExynosAutov9 SADK
Link: https://lore.kernel.org/r/20230129143944.5104-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 21:56:46 +0000 (22:56 +0100)]
Merge tag 'samsung-dt-6.3' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v6.3
1. Big cleanup and rework towards achieving zero-warning of dtbs_check
and dtc W=1:
- align node names with the bindings,
- drop or correct incorrect properties in several boards,
- correct HDMI bridge ports nodes on Exynos4412 Midas,
- add dummy regulator supplies when necessary to fullfil bindings
requirements,
- use lowercase hex,
- move non-MMIO exynos-bus nodes out of soc node,
- add unit address to USB DWC3 nodes.
2. Correct Exynos5420 MIPI DSI and phy compatibles.
3. Correct Exynos4210 and Exynos4412 HDMI phy compatibles.
4. Add Samsung Galaxy S5 (SM-G900H) board.
* tag 'samsung-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (27 commits)
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420
ARM: dts: exynos: use lowercase hex addresses
ARM: dts: exynos: use generic node names for phy
ARM: dts: exynos: correct HDMI phy compatible in Exynos4
ARM: dts: exynos: Add Samsung Galaxy S5 (SM-G900H) board
dt-bindings: arm: samsung: Add compatible for Samsung Galaxy S5 (SM-G900H)
ARM: dts: exynos: Use Exynos5422 compatible for the DSI controller
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
ARM: dts: exynos: correct HSI2C properties in Exynos5410 Odroid XU
ARM: dts: exynos: correct HS200 property in Exynos5260
ARM: dts: exynos: correct SATA clocks in Exynos5250
ARM: dts: exynos: align HSOTG/USB node names
ARM: dts: exynos: add backlight supply in P4 Note
ARM: dts: exynos: add panel supply in Tiny4412
ARM: dts: exynos: add ports in HDMI bridge in Exynos4412 Midas
...
Link: https://lore.kernel.org/r/20230129143944.5104-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 21:55:59 +0000 (22:55 +0100)]
Merge tag 'arm-soc/for-6.3/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64 SoCs Device Tree updates for
6.3, please pull the following:
- Krzysztof aligns the SMMMU Device Tree nodes to use the desired
regular expression matched by the dtschema and he also removes the
deprecated "device_type" property for serial node(s)
* tag 'arm-soc/for-6.3/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: drop deprecated serial device_type
arm64: dts: broadcom: align SMMU node names with DT schema
Link: https://lore.kernel.org/r/20230128193834.1628831-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 21:55:09 +0000 (22:55 +0100)]
Merge tag 'arm-soc/for-6.3/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM SoCs Device Tree updates for
6.3, please pull the following:
- Krzysztof aligns the various Broadcom SoCs DTS UART nodes with the
binding convention to use "serial"
* tag 'arm-soc/for-6.3/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: align UART node name with bindings
Link: https://lore.kernel.org/r/20230128193829.1628773-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 21:42:37 +0000 (22:42 +0100)]
Merge tag 'sunxi-dt-for-6.3-1' of https://git./linux/kernel/git/sunxi/linux into arm/dt
- introduce Allwinner D1 DTSI
- add boards: Dongshan Nezha STU, MangoPi MQ (Pro), Sipeed Lichee RV,
Nezha
- add D1 power controller node
- Add SATA regulator to Bananapi M3
- fix regulator reference for nanopi-duo2
- fix GPIO node names
- align HDMI CEC node name for h3-beelink-x2
- add DPHY interrupt to A64 and A33
* tag 'sunxi-dt-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: Add power controller node
riscv: Add the Allwinner SoC family Kconfig option
riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
riscv: dts: allwinner: Add MangoPi MQ devicetree
riscv: dts: allwinner: Add the D1/D1s SoC devicetree
dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
MAINTAINERS: Match the sun20i family of Allwinner SoCs
ARM: dts: sun8i: a83t: bananapi-m3: describe SATA disk regulator
ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
ARM: dts: sunxi: Fix GPIO LED node names
ARM: dts: sun8i: h3-beelink-x2: align HDMI CEC node names with dtschema
arm64: dts: allwinner: a64: Add DPHY interrupt
ARM: dts: sun8i: a33: Add DPHY interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 17:16:35 +0000 (18:16 +0100)]
Merge tag 'tegra-for-6.3-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v6.3-rc1
There are two big changes in this: one is to bump the #address-cells and
the #size-cells properties to 2 so that bus address translations work
correctly and another to sort nodes according to a scheme that we've
been trying to follow, but where some inconsistencies have accumulated
over the years.
As for the rest, this adds mostly new things on Tegra234, such as USB
host and device support and identification EEPROMs found on Jetson AGX
Orin.
Some cleanups are also included, such as the removal of unneeded
properties or duplicated nodes.
* tag 'tegra-for-6.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Drop I2C iommus and dma-coherent properties
arm64: tegra: Mark host1x as dma-coherent on Tegra194/234
arm64: tegra: Populate the XUDC node for Tegra234
arm64: tegra: Add dma-coherent property for Tegra194 XUDC
arm64: tegra: Populate Jetson AGX Orin EEPROMs
arm64: tegra: Populate address/size cells for Tegra234 I2C
arm64: tegra: Enable XUSB host function on Jetson AGX Orin
arm64: tegra: Sort nodes by unit-address, then alphabetically
arm64: tegra: Bump #address-cells and #size-cells
arm64: tegra: Sort includes
arm64: tegra: Fix duplicate regulator on Jetson TX1
arm64: tegra: Fix typo in gpio-ranges property
Link: https://lore.kernel.org/r/20230127163719.460954-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 17:15:48 +0000 (18:15 +0100)]
Merge tag 'tegra-for-6.3-arm-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v6.3-rc1
Just a single patch to properly sort nodes and make the DTS files easier
to read.
* tag 'tegra-for-6.3-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Sort nodes by unit-address, then alphabetically
Link: https://lore.kernel.org/r/20230127163719.460954-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 17:15:19 +0000 (18:15 +0100)]
Merge tag 'tegra-for-6.3-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.3-rc1
Device tree files for 64-bit ARM Tegra SoCs have recently had to bump
the #address-cells and #size-cells to 2 in order to support bus address
translations across the entire device tree hierarchy. Explicitly allow
this in DT schemas to prevent validation errors.
* tag 'tegra-for-6.3-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra: Allow #{address,size}-cells = <2>
Link: https://lore.kernel.org/r/20230127163719.460954-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 17:14:15 +0000 (18:14 +0100)]
Merge tag 'renesas-dts-for-v6.3-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT updates for v6.3 (take two)
- High Performance mode (1.8 GHz) support for the Cortex-A76 CPU cores
on R-Car V4H,
- GPIO interrupt support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- USB Function support for the RZ/N1D SoC,
- Generic Sound Card driver examples for the Renesas R-Car Starter Kit
Premier/Pro and Shimafugi Kingfisher development board stack,
- Universal Flash Storage support for the Renesas Spider development
board,
- External Power Sequence Controller (PWC) support for the RZ/V2M SoC
and the RZ/V2M Evaluation Kit 2.0,
- IOMMU support for MMC on the R-Car S4-8 SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: r8a779f0: Add iommus to MMC node
arm64: dts: renesas: v2mevk2: Add PWC support
arm64: dts: renesas: r9a09g011: Add PWC support
arm64: dts: renesas: r9a09g011: Reword ethernet status
arm64: dts: renesas: r8a774[be]1-beacon: Sync aliases with RZ/G2M
arm64: dts: renesas: beacon-renesom: Fix audio clock rate
arm64: dts: renesas: beacon-renesom: Update Ethernet PHY ID
arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
arm64: dts: renesas: spider-cpu: Enable UFS device
arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card MIX + TDM Split dtsi
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card MIX + TDM Split dtsi
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 MIX + TDM Split dtsi
arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card dtsi
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 dtsi
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card dtsi
arm64: dts: renesas: #sound-dai-cells is used when simple-card
ARM: dts: renesas: #sound-dai-cells is used when simple-card
arm64: dts: renesas: eagle: Add SCIF_CLK support
ARM: dts: r9a06g032: Add the USBF controller node
arm64: dts: renesas: rzg2ul-smarc-som: Add PHY interrupt support for ETH{0/1}
...
Link: https://lore.kernel.org/r/cover.1674815099.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 17:12:34 +0000 (18:12 +0100)]
Merge tag 'renesas-dt-bindings-for-v6.3-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v6.3
- Document support for the Renesas RZ/V2M External Power Sequence
Controller (PWC).
* tag 'renesas-dt-bindings-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Add RZ/V2M PWC
Link: https://lore.kernel.org/r/cover.1674815097.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 16:52:35 +0000 (17:52 +0100)]
Merge tag 'qcom-arm64-for-6.3' of https://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 Devicetree updates for v6.3
This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
platform. In addition to the adding support for the MTP on this
platform, support the following devices is introduced:
- GPLUS FL8005A
- Google Zombie with LTE and NVMe
- Google Zombie with NVMe
- Lenovo Tab P11
- Motorola G5 Plus
- Motorola G7 Power
- Motorola Moto G6
- Samsung Galaxy J5 (2016)
- Samsung Galaxy Tab A 8.0
- Samsung Galaxy Tab A 9.7
- Xiaomi Mi A1
- Xiaomi Mi A2 Lite
- Xiaomi Redmi 5 Plus
- Xiaomi Redmi Note 4X
On IPQ8074 the PCIe PHY register regions and PHY clock names are
corrected.
On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
unconditionally enabled. Per-sensor calibration data is provided for the
thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
gains support for touchscreen and flash LED. An additional Samsung
Galaxy J5 variant is added, and support is added for hall sensor and
MUIC.
Per-sensor calibration information is introduced for the thermal sensor
on MSM8956 as well.
On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
carveout is added to get modem metadata out of System RAM. Missing bus
clocks are added for agnoc2.
SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
high-speed, to make USB work.
MSM8998 gains the same modem carveout as other platforms, and the
description of the clock hierarchy is improved.
On QCS404 the clock hierarchy description is improved, the CDSP PAS node
is adjusted to match the binding and the thermal sensor (tsens) gains
per-sensor calibration information.
On SC7180 the Data Capture and Compare block is intorduced, and a
carveout for the modem metadata is introduced, to get this out of System
RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
adjusted for the Trogdor eDP and touchscreen.
Data lane and frequency properties are introduced for the DisplayPort
links.
SC7280 also gets Data Capture and Compare support, as well as the
dedicated modem metadata region. Herobrine gains DP audio support.
IPA description is updated so that it's only active on boards with a
modem.
On SC8280XP the display subsystem is introduced, currently with support
for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
introduced, for audio support. Missing I2C and SPI controllers are
introduced.
Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
the SA8295P ADP automotive board. The SA8540P Ride platform enables one
i2c and pcie controllers.
A CMA region is defined for the CRD and X13s, to avoid allocation issues
from the NVMe support.
Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
a description of simplefb.
SDM670 gains QFPROM definition.
SDM845 gains a carveout for the modem metadata and support for the Data
Capture and Compare block is introduced. Lenovo Yoga C630 firmware
paths are aligned with all other Qualcomm platforms.
On SM6125 apss SMMU is introduced and streams are defined for USB and
SDHCI controllers. GPI DMA description is introduced, as well as missing
SPI and I2C serial engines.
On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
introduced, and I2C and related GPI DMA blocks are enabled.
On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
CPUfreq.
Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
enabled as well.
On SM8150 the display subsystem is introduced, with clock controller,
DPU and two DSI controllers. The Data Capture and Compare block is
introduced.
For the Sony Xperia Kumano platform, GPIO keys and NFC support is
introduced.
For SM8350 PCIe is introduced, as is the display subsystem with display
clock controller, DPU and two DSI controllers. #interconnect-cells is
changed to 2, to align with other platforms and allow for active-only
votes. The display is enabled and the LT9611uxc found on the SM8350
Hardware Development Kit board is described, to provide HDMI output.
On SM8450 the display subsystem is introduced, with DPU and two DSI
controllers. GIC-ITS support is introduced for both PCIe0 and PCIe1.
SPMI bus support is introduced and pmics are wired up across the various
devices.
The display subsystem is enabled and the LT9611uxc is described to
provide HDMI output on the SM8450 Hardware Development Kit.
On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
introduced. As is the SLG51000 PMIC and camera regulators are defined.
Support for SM8550 is introduced, with support for storage, USB,
remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
blocks are enabled on the MTP.
Lastly, the work continue to align Devicetree source with bindings
across all platforms.
* tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (320 commits)
arm64: dts: qcom: sc7280: Add a carveout for modem metadata
arm64: dts: qcom: sc7180: Add a carveout for modem metadata
arm64: dts: qcom: sdm845: Add a carveout for modem metadata
arm64: dts: qcom: msm8998: Add a carveout for modem metadata
arm64: dts: qcom: msm8996: Add a carveout for modem metadata
arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller
arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes
arm64: dts: qcom: sm8250: drop unused properties from tx-macro
arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro
arm64: dts: qcom: align OPP table node name with DT schema
arm64: dts: qcom: rename mdp nodes to display-controller
...
Link: https://lore.kernel.org/r/20230126202528.3691539-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 16:48:54 +0000 (17:48 +0100)]
Merge tag 'riscv-dt-for-v6.3-mw0' of https://git./linux/kernel/git/conor/linux into arm/dt
RISC-V Devicetrees for v6.3-mw0
Microchip:
A vendor prefix for Aldec and both a binding and Devicetree for the
Aldec TySoM devkit for PolarFire SoC. This Devicetree corresponds to
what they are shipping in the SDK for rev2 boards.
StarFive:
Just the binding for the new StarFive JH7110 SoC and its first-party
SDC the VisionFive 2.
Other:
I was expecting the Devicetree for the aforementioned board to be ready
for this window, as the pinctrl driver had seem some review prior to
v6.2 and both it & the base clock drivers are heavily based on the
existing drivers for the JH7110.
That didn't come to be.. Christmas, the RISC-V Summit in December and
the Lunar New Year all playing a part perhaps.
Because of that, both Palmer and I have the Kconfig.socs work in our
branches, although in hindsight it probably wasn't needed here as I
only added the TySoM Devicetree & the conflict would've been trivial.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: add the Aldec TySoM's devicetree
dt-bindings: riscv: microchip: document the Aldec TySoM
dt-bindings: vendor-prefixes: Add entry for Aldec
RISC-V: stop directly selecting drivers for SOC_CANAAN
RISC-V: stop selecting SiFive clock and serial drivers directly
RISC-V: stop selecting the PolarFire SoC clock driver
RISC-V: kbuild: convert all use of SOC_FOO to ARCH_FOO
RISC-V: kconfig.socs: convert usage of SOC_CANAAN to ARCH_CANAAN
RISC-V: introduce ARCH_FOO kconfig aliases for SOC_FOO symbols
dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board
Link: https://lore.kernel.org/r/Y9LP+Za1h0fkBa58@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 16:47:00 +0000 (17:47 +0100)]
Merge tag 'qcom-dts-for-6.3' of https://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DT updates for v6.3
This introduces support for Acer Iconia Talk S A1-724
The Samsung Galaxy Tab 4 10.1 gains ADSP and backlight support.
The Xperia Z2 Tablet gets charging enabled and the touchscreen is given
a little bit more time to start up.
APQ8064 and MSM8974 gains improvements in clock hierarchy. APQ8064
thermal sensor (tsens) driver gains per-censor calibration data.
Lastly a set of patches that improves DT binding compliance.
* tag 'qcom-dts-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (50 commits)
ARM: dts: qcom: msm8226: add RPMCC node
ARM: dts: qcom: apq8084: add clocks and clock-names to gcc device
ARM: dts: qcom: align OPP table node name with DT schema
ARM: dts: qcom: rename mdp nodes to display-controller
ARM: dts: qcom-msm8974: rename mdss node to display-subsystem
ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
dt-bindings: qcom: Document samsung,gt58 and gt510
dt-bindings: qcom: Document bindings for msm8916-samsung-j5x
ARM: dts: qcom: use qcom,gsi-loader for IPA
ARM: dts: qcom-apq8084: specify per-sensor calibration cells
ARM: dts: qcom-msm8974: specify per-sensor calibration cells
dt-bindings: arm: qcom: Document MSM8939 SoC binding
ARM: dts: qcom: msm8974: add xo clock to rpm clock controller
dt-bindings: qcom: Document msm8916-gplus-fl8005a
dt-bindings: vendor-prefixes: Add GPLUS
ARM: dts: qcom: apq8026-samsung-matisse-wifi: Add display backlight
dt-bindings: arm: qcom: Add SM6115(P) and Lenovo Tab P11
ARM: dts: qcom: add missing space before {
dt-bindings: arm: qcom: add board-id/msm-id for MSM8956, SDM636 and SM4250
dt-bindings: arm: qcom: Add zombie with NVMe
...
Link: https://lore.kernel.org/r/20230126174725.3681745-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sean Anderson [Tue, 24 Jan 2023 17:47:57 +0000 (12:47 -0500)]
arm64: ls1046ardb: Use in-band-status for SFP module
net10 is connected to an SFP module. Unfortunately, the I2C lines are
not connected due to an address conflict. Now that DPAA uses phylink, we
can use in-band-status. This lets us determine whether the link is up or
down instead of assuming it is up all the time. Also fix the phy mode
while we're here.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Philippe Schenker [Thu, 26 Jan 2023 11:54:38 +0000 (19:54 +0800)]
arm64: dts: imx8mp-verdin: Add yavia carrier board
Add new carrier board device tree Yavia for the Verdin iMX8M Plus SoM.
Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.
Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Philippe Schenker [Mon, 23 Jan 2023 15:17:33 +0000 (16:17 +0100)]
arm64: dts: imx8mm-verdin: Add yavia carrier board
Add new carrier board device tree Yavia for the Verdin iMX8M Mini SoM.
Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.
Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Krzysztof Kozlowski [Mon, 23 Jan 2023 15:15:55 +0000 (16:15 +0100)]
arm64: dts: imx8q: use generic node name for rave-sp
Use generic "mcu" node name for rave-sp node, as recommended by
Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Sun, 22 Jan 2023 16:20:13 +0000 (17:20 +0100)]
ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board
Add DT for DH DRC02 unit, which is a universal controller device.
The system has two ethernet ports, two CANs, RS485 and RS232, USB,
capacitive buttons and an OLED display. For this board a DHCOM
i.MX6ULL SoM configuration without WiFi/BT is used. The interface
is used for the SD card instead.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Sun, 22 Jan 2023 16:20:12 +0000 (17:20 +0100)]
ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LED and a custom
board-to-board expansion connector. For this board a DHCOM i.MX6ULL
SoM configuration without WiFi/BT is used. The interface is used
for the SD card instead. Make this adjustment by using a separate DT
include file.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Sun, 22 Jan 2023 16:20:11 +0000 (17:20 +0100)]
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
Add support for DH electronics DHCOM SoM and PDK2 rev. 400 carrier
board. This is an SoM with i.MX6ULL and an evaluation kit. The
baseboard provides Ethernet, UART, USB, CAN and optional display.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 23 Dec 2022 03:04:33 +0000 (11:04 +0800)]
ARM: dts: imx7s: correct iomuxc gpr mux controller cells
Per binding doc reg-mux.yaml, the #mux-control-cells should be 1
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes:
94a905a79f2c ("ARM: dts: imx7s: add multiplexer controls")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 21:27:13 +0000 (22:27 +0100)]
arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:
exynos7-espresso.dtb: soc@0: usb: {'compatible': ['samsung,exynos7-dwusb3'], ...
should not be valid under {'type': 'object'}
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230127212713.267014-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 21:27:12 +0000 (22:27 +0100)]
arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:
exynos5433-tm2e.dtb: soc@0: usbdrd: {'compatible': ['samsung,exynos5433-dwusb3'], ...
should not be valid under {'type': 'object'}
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230127212713.267014-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 21:27:11 +0000 (22:27 +0100)]
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:
exynos5422-odroidhc1.dtb: soc: usb3-0: {'compatible': ['samsung,exynos5250-dwusb3'],
... } should not be valid under {'type': 'object'}
exynos54xx.dtsi:145.21-159.5: Warning (simple_bus_reg): /soc/usb3-0: missing or empty reg/ranges property
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230127212713.267014-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 21:27:10 +0000 (22:27 +0100)]
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:
exynos5250-smdk5250.dtb: soc: usb3: {'compatible': ['samsung,exynos5250-dwusb3'],
... } should not be valid under {'type': 'object'}
exynos5250.dtsi:638.16-653.5: Warning (simple_bus_reg): /soc/usb3: missing or empty reg/ranges property
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230127212713.267014-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 25 Jan 2023 09:45:12 +0000 (10:45 +0100)]
arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433
The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:
exynos5433-bus.dtsi:10.20-16.4:
Warning (simple_bus_reg): /soc@0/bus0: missing or empty reg/ranges property
and dtbs_check:
exynos5433-tm2.dtb: soc@0: bus1:
{'compatible': ['samsung,exynos-bus'], 'clocks': [[21, 220]], 'clock-names': ['bus'], 'operating-points-v2': [[165]], 'status': ['okay'], 'devfreq': [[166]]} should not be valid under {'type': 'object'}
Move the bus nodes and their OPP tables out of SoC to fix this.
Link: https://lore.kernel.org/r/20230125094513.155063-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 25 Jan 2023 09:45:09 +0000 (10:45 +0100)]
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412
The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:
exynos4412.dtsi:407.20-413.5:
Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
and dtbs_check:
exynos4412-i9300.dtb: soc: bus-acp:
{'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).
Link: https://lore.kernel.org/r/20230125094513.155063-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 25 Jan 2023 09:45:08 +0000 (10:45 +0100)]
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210
The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:
exynos4210.dtsi:218.20-224.5:
Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property
and dtbs_check:
exynos4210-i9100.dtb: soc: bus-dmc:
{'compatible': ['samsung,exynos-bus'], 'clocks': [[5, 457]], 'clock-names': ['bus'], 'operating-points-v2': [[82]], 'status': ['disabled']} should not be valid under {'type': 'object'}
Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).
Link: https://lore.kernel.org/r/20230125094513.155063-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 25 Jan 2023 09:45:07 +0000 (10:45 +0100)]
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250
The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:
exynos3250.dtsi:775.20-781.5:
Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property
and dtbs_check:
exynos3250-artik5-eval.dtb: soc: bus-dmc:
{'compatible': ['samsung,exynos-bus'], 'clocks': [[67, 16]], 'clock-names': ['bus'], 'operating-points-v2': [[68]], 'status': ['disabled']} should not be valid under {'type': 'object'}
Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).
Link: https://lore.kernel.org/r/20230125094513.155063-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 25 Jan 2023 09:45:06 +0000 (10:45 +0100)]
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420
The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:
arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
and dtbs_check:
exynos5420-arndale-octa.dtb: soc: bus-wcore:
{'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).
Link: https://lore.kernel.org/r/20230125094513.155063-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 10:18:29 +0000 (11:18 +0100)]
arm64: dts: amd: use "okay" for status
"okay" over "ok" is preferred for status property.
Link: https://lore.kernel.org/r/20230127101829.93761-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 10:18:27 +0000 (11:18 +0100)]
arm64: dts: apm: use "okay" for status
"okay" over "ok" is preferred for status property.
Link: https://lore.kernel.org/r/20230127101827.93728-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 27 Jan 2023 10:18:24 +0000 (11:18 +0100)]
arm64: dts: microchip: use "okay" for status
"okay" over "ok" is preferred for status property.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20230127101824.93684-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 25 Jan 2023 09:45:13 +0000 (10:45 +0100)]
arm64: dts: exynos: use lowercase hex addresses
By convention the hex addresses should be lowercase.
Link: https://lore.kernel.org/r/20230125094513.155063-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:31:16 +0000 (18:31 +0100)]
arm64: dts: exynos: correct wlf,micd-dbtime on TM2
The wlf,micd-dbtime property of WM5110 codec can be either 2 or 4
(driver ignores other values, so assume author wanted something here):
exynos5433-tm2e.dtb: audio-codec@0: wlf,micd-dbtime:0:0: 1 is not one of [2, 4]
Link: https://lore.kernel.org/r/20230120173116.341270-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:31:15 +0000 (18:31 +0100)]
arm64: dts: exynos: add interrupt-controller to WM5110 on TM2
The WM5110 bindings expect node to be interrupt controller:
exynos5433-tm2.dtb: audio-codec@0: 'interrupt-controller' is a required property
exynos5433-tm2.dtb: audio-codec@0: '#interrupt-cells' is a required property
Link: https://lore.kernel.org/r/20230120173116.341270-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:31:14 +0000 (18:31 +0100)]
arm64: dts: exynos: add VPH_PWR regulator on TM2
VPH_PWR is routed to battery, so it is not configurable. However few
devices, e.g. WM5110 expect speaker power supplies, thus provide the
regulator for full hardware description. Audio amplifier also accepts
that power supply.
Keep ordering the nodes by renaming existing IRDA regulator.
This fixes dtbs_check warnings:
exynos5433-tm2e.dtb: audio-codec@0: 'SPKVDDL-supply' is a required property
exynos5433-tm2e.dtb: audio-codec@0: 'SPKVDDR-supply' is a required property
Link: https://lore.kernel.org/r/20230120173116.341270-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:31:13 +0000 (18:31 +0100)]
arm64: dts: exynos: correct Bluetooth LED triger on E850-96
Switch source of LED activity to hci0-power from RX, to match bindings
(same effect expected):
exynos850-e850-96.dtb: leds: led-5:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'hci0rx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
'hci0rx' does not match '^cpu[0-9]*$'
'hci0rx' does not match '^hci[0-9]+-power$'
'hci0rx' does not match '^mmc[0-9]+$'
'hci0rx' does not match '^phy[0-9]+tx$'
Link: https://lore.kernel.org/r/20230120173116.341270-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:31:12 +0000 (18:31 +0100)]
arm64: dts: exynos: add ADC supply on Exynos7 Espresso
ADC requires supply and it seems LDO3 (same as on Exynos5433 TM2 boards)
fits in voltage range of 1.8 V. Use it to silence warning:
exynos7-espresso.dtb: adc@
13620000: 'vdd-supply' is a required property
Link: https://lore.kernel.org/r/20230120173116.341270-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:31:11 +0000 (18:31 +0100)]
arm64: dts: exynos: disable non-working GPU on Exynos7 Espresso
The Panfrost GPU drivers require clock but such was not provided in
Exynos7 DTSI. The CMU_G3D clock controller was not upstreamed, thus
consider GPU as non-working and simply disable it to silence warnings
like:
exynos7-espresso.dtb: gpu@
14ac0000: 'clocks' is a required property
Link: https://lore.kernel.org/r/20230120173116.341270-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Samuel Holland [Thu, 26 Jan 2023 06:34:19 +0000 (00:34 -0600)]
riscv: dts: allwinner: d1: Add power controller node
The Allwinner D1 family of SoCs contain a PPU power domain controller
separate from the PRCM. It can power down the video engine and DSP, and
it contains special logic for hardware-assisted CPU idle.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230126063419.15971-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:37 +0000 (22:57 -0600)]
riscv: Add the Allwinner SoC family Kconfig option
Allwinner manufactures the sunxi family of application processors. This
includes the "sun8i" series of ARMv7 SoCs, the "sun50i" series of ARMv8
SoCs, and now the "sun20i" series of 64-bit RISC-V SoCs.
The first SoC in the sun20i series is D1, containing a single T-HEAD
C906 core. D1s is a low-pin-count variant of D1 with co-packaged DRAM.
Most peripherals are shared across the entire chip family. In fact, the
ARMv7 T113 SoC is pin-compatible and almost entirely register-compatible
with the D1s.
This means many existing device drivers can be reused. To facilitate
this reuse, name the symbol ARCH_SUNXI, since that is what the existing
drivers have as their dependency.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126045738.47903-11-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:36 +0000 (22:57 -0600)]
riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
The 100ask Dongshan Nezha STU is a system-on-module that can be used
standalone or with a carrier board. The SoM provides gigabit Ethernet,
HDMI, a USB peripheral port, and WiFi/Bluetooth via an RTL8723DS chip.
The "DIY" carrier board exposes almost every pin from the D1 SoC to 0.1"
headers, but contains no digital circuitry, so it does not have its own
devicetree.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-10-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:35 +0000 (22:57 -0600)]
riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
The MangoPi MQ Pro is a tiny SBC with a layout compatible to the
Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3,
and an RTL8723DS-based WiFi/Bluetooth module.
The board also exposes GPIO Port E via a connector on the end of the
board, which can support either a camera or an RMII Ethernet PHY. The
additional regulators supply that connector.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-9-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:34 +0000 (22:57 -0600)]
riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
Sipeed manufactures a "Lichee RV" system-on-module, which provides a
minimal working system on its own, as well as a few carrier boards. The
"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
provides 100M Ethernet and a built-in display panel.
The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
panel interface, since the USB OTG port is inaccessible inside the case.
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-8-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:33 +0000 (22:57 -0600)]
riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
"D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
plus low-speed I/O from the SoC and a GPIO expander chip.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-7-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:32 +0000 (22:57 -0600)]
riscv: dts: allwinner: Add MangoPi MQ devicetree
The MangoPi MQ is a tiny SBC built around the Allwinner D1s. Its
onboard peripherals include two USB Type-C ports (1 device, 1 host)
and RTL8189FTV WLAN.
A MangoPi MQ-R variant of the board also exists. The MQ-R has a
different form factor, but the onboard peripherals are the same.
Most D1 and D1s boards use a similar power tree, with the 1.8V rail
powered by the SoC's internal LDOA, analog domains powered by ALDO,
and the rest of the board powered by always-on fixed regulators. To
avoid duplication, factor out the regulator information that is
common across boards.
The board also exposes GPIO Port E via a FPC connector, which can
support either a camera or an RMII Ethernet PHY. The additional
regulators supply that connector.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:31 +0000 (22:57 -0600)]
riscv: dts: allwinner: Add the D1/D1s SoC devicetree
D1 (aka D1-H), D1s (aka F133), R528, and T113 are a family of SoCs based
on a single die, or at a pair of dies derived from the same design.
D1 and D1s contain a single T-HEAD Xuantie C906 CPU, whereas R528 and
T113 contain a pair of Cortex-A7's. D1 and R528 are the full version of
the chip with a BGA package, whereas D1s and T113 are low-pin-count QFP
variants.
Because the original design supported both ARM and RISC-V CPUs, some
peripherals are duplicated. In addition, all variants except D1s contain
a HiFi 4 DSP with its own set of peripherals.
The devicetrees are organized to minimize duplication:
- Common perhiperals are described in sunxi-d1s-t113.dtsi
- DSP-related peripherals are described in sunxi-d1-t113.dtsi
- RISC-V specific hardware is described in sun20i-d1s.dtsi
- Functionality unique to the D1 variant is described in sun20i-d1.dtsi
The SOC_PERIPHERAL_IRQ macro handles the different #interrupt-cells
values between the ARM (GIC) and RISC-V (PLIC) versions of the SoC.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:30 +0000 (22:57 -0600)]
dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
Several SoMs and boards are available that feature the Allwinner D1 or
D1s SoC. Document their compatible strings.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:29 +0000 (22:57 -0600)]
dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
Some boards using the Allwinner D1 or D1s SoC are made by vendors not
previously documented.
Clockwork Tech LLC (https://www.clockworkpi.com/) manufactures the
ClockworkPi and DevTerm boards.
Beijing Widora Technology Co., Ltd. (https://mangopi.cc/) manufactures
the MangoPi family of boards.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Thu, 26 Jan 2023 04:57:28 +0000 (22:57 -0600)]
MAINTAINERS: Match the sun20i family of Allwinner SoCs
Allwinner sunxi SoCs with a RISC-V CPU use the sun20i designator. Match
that pattern in addition to the designators for 32 and 64-bit ARM SoCs.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Fri, 20 Jan 2023 01:26:16 +0000 (01:26 +0000)]
ARM: dts: sun8i: a83t: bananapi-m3: describe SATA disk regulator
The Bananapi-M3 has a SATA connector, driven by a USB-to-SATA bridge
soldered on the board. The power for the SATA device is provided by a
GPIO controlled regulator. Since the SATA device is behind USB, it has
no DT node, so we never described this regulator. Instead U-Boot was
turning this on in a rather hackish way, which we now want to get rid of.
On top of that it seems fragile to leave this GPIO undescribed, as
userland could claim it and turn the disk off.
Add a fixed regulator, controlled by the PD25 GPIO, and mark it as
always-on. This would mimic the current situation, but in a safer way,
and would allow U-Boot to drop the CONFIG_SATAPWR enable hack.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230120012616.30960-1-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Sat, 31 Dec 2022 22:58:54 +0000 (16:58 -0600)]
ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
Fixes:
4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Sat, 31 Dec 2022 22:58:53 +0000 (16:58 -0600)]
ARM: dts: sunxi: Fix GPIO LED node names
These board devicetrees fail to validate because the gpio-leds schema
requires its child nodes to have "led" in the node name.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221231225854.16320-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Krzysztof Kozlowski [Sun, 4 Dec 2022 18:33:41 +0000 (19:33 +0100)]
ARM: dts: sun8i: h3-beelink-x2: align HDMI CEC node names with dtschema
The bindings expect "cec" for HDMI CEC node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221204183341.139946-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Mon, 14 Nov 2022 02:21:08 +0000 (20:21 -0600)]
arm64: dts: allwinner: a64: Add DPHY interrupt
The DPHY has an interrupt line which is shared with the DSI controller.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114022113.31694-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Mon, 14 Nov 2022 02:21:07 +0000 (20:21 -0600)]
ARM: dts: sun8i: a33: Add DPHY interrupt
The DPHY has an interrupt line which is shared with the DSI controller.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114022113.31694-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Yuntian Zhang [Fri, 27 Jan 2023 15:05:36 +0000 (15:05 +0000)]
arm64: dts: meson: add support for Radxa Zero2
Radxa Zero2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 32/64/128GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output (micro)
- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header
Signed-off-by: Yuntian Zhang <yt@radxa.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127150536.3719090-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Christian Hewitt [Fri, 27 Jan 2023 15:05:35 +0000 (15:05 +0000)]
dt-bindings: arm: amlogic: add support for Radxa Zero2
The Radxa Zero2 is a small form-factor SBC using the Amlogic
A311D chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127150536.3719090-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Christian Hewitt [Fri, 27 Jan 2023 14:22:21 +0000 (14:22 +0000)]
arm64: dts: meson: add support for BananaPi M2-Pro
BPI-M2-PRO is based upon the BPI-M5 design except for a different
physical board layout and the following changes:
- USB 3.0 ports reduced from 4x to 2x
- 3.5mm Combined CVBS/Audio Jack removed
- RTL8821BU WiFi/BT module (internal USB connected)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-6-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Christian Hewitt [Fri, 27 Jan 2023 14:22:20 +0000 (14:22 +0000)]
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
BPI-M2-PRO is based upon the BPI-M5 using the Amlogic SM1 (S905X3) chipset.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-5-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Christian Hewitt [Fri, 27 Jan 2023 14:22:19 +0000 (14:22 +0000)]
arm64: dts: meson: bananapi-m5: convert dts to dtsi
Convert the BPI-M5 dts into meson-sm1-bananapi.dtsi to support the
addition of new boards based on the same design.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-4-christianshewitt@gmail.com
[narmstrong: fixed adc-keys node name]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Christian Hewitt [Fri, 27 Jan 2023 14:22:18 +0000 (14:22 +0000)]
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
The sound device is enabled by default so remove the redundant status.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Christian Hewitt [Fri, 27 Jan 2023 14:22:17 +0000 (14:22 +0000)]
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN
and VDDIO_C pins to be switched to high impedance mode. This can be achieved
using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode
and retain high state (pin has the pull-up).
This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been
used to resolve similar problems with the Odroid C4 board (TF_IO in the C4
dts is the equivalent regulator).
Fixes:
976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Thierry Reding [Thu, 17 Nov 2022 17:56:19 +0000 (18:56 +0100)]
dt-bindings: tegra: Allow #{address,size}-cells = <2>
Both 1 and 2 are valid values for #address-cells and #size-cells on the
various busses specified in these bindings, so explicitly allow 2.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 17 Oct 2022 17:03:39 +0000 (19:03 +0200)]
arm64: tegra: Drop I2C iommus and dma-coherent properties
Drop the iommus and dma-coherent properties for the I2C controller
device tree nodes. These are only needed for the device tree nodes
that represent the GPC DMA controller, since that is the device
performing the direct memory accesses.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Christian Hewitt [Fri, 27 Jan 2023 10:39:13 +0000 (10:39 +0000)]
arm64: dts: meson: radxa-zero: allow usb otg mode
Setting dr_mode to "host" prevents otg which can be useful on a board
with limited connectivity options. So don't force host mode.
Fixes:
26d1400f7457 ("arm64: dts: amlogic: add support for Radxa Zero")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127103913.3386435-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Krzysztof Kozlowski [Mon, 23 Jan 2023 15:15:39 +0000 (16:15 +0100)]
ARM: dts: berlin: align UART node name with bindings
Bindings expect UART/serial node names to be "serial".
Link: https://lore.kernel.org/r/20230123151539.369654-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Mon, 23 Jan 2023 15:15:40 +0000 (16:15 +0100)]
arm64: dts: synaptics: align UART node name with bindings
Bindings expect UART/serial node names to be "serial".
berlin4ct-dmp.dtb: uart@d000: $nodename:0: 'uart@d000' does not match '^serial(@.*)?$'
Link: https://lore.kernel.org/r/20230123151540.369690-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Mon, 23 Jan 2023 15:15:16 +0000 (16:15 +0100)]
arm64: dts: hisilicon: align UART node name with bindings
Bindings expect UART/serial node names to be "serial".
Link: https://lore.kernel.org/r/20230123151516.369130-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Mon, 23 Jan 2023 15:15:14 +0000 (16:15 +0100)]
arm64: dts: realtek: align UART node name with bindings
Bindings expect UART/serial node names to be "serial".
Link: https://lore.kernel.org/r/20230123151514.369101-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Yoshihiro Shimoda [Mon, 23 Jan 2023 01:34:45 +0000 (10:34 +0900)]
arm64: dts: renesas: r8a779f0: Add iommus to MMC node
Add iommus property to the MMC node for r8a779f0.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230123013448.1250991-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fabrizio Castro [Wed, 18 Jan 2023 14:47:46 +0000 (14:47 +0000)]
arm64: dts: renesas: v2mevk2: Add PWC support
The RZ/V2M EVK uses the PWC IP to control external power supplies
and the I/O voltage for the uSD card.
This patch enables the PWC node, and it also enables the poweroff
features since PWC is actually used to control the board power
rails.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230118144747.24968-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fabrizio Castro [Wed, 18 Jan 2023 14:47:45 +0000 (14:47 +0000)]
arm64: dts: renesas: r9a09g011: Add PWC support
The RZ/V2M SoC contains an External Power Sequence Controller (PWC)
module. This module provides an external power supply on/off
sequence, on/off signal for the LPDDR4 core power supply, General
Purpose Outputs, and key input signals.
This patch adds PWC support to the SoC specific device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230118144747.24968-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fabrizio Castro [Wed, 18 Jan 2023 13:52:59 +0000 (13:52 +0000)]
arm64: dts: renesas: r9a09g011: Reword ethernet status
Although of_fdt_device_is_available returns true when the DT
property "status" is assigned "ok" or "okay", and false for every
other value, it's become common practice to assign "disabled"
when we want of_fdt_device_is_available to return false.
For some reason, the status property of the ethernet node was
assigned "disable" when originally added to the kernel. Change
it to "disabled" for consistency.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230118135259.19249-1-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adam Ford [Tue, 17 Jan 2023 23:26:08 +0000 (17:26 -0600)]
arm64: dts: renesas: r8a774[be]1-beacon: Sync aliases with RZ/G2M
The Beacon Embedded RZ/G2[MNH] boards all have the same baseboard
and all share the same PCB. To make sure all instances appear
the same, make the aliases for RZ/G2N and RZ/G2H match RZ/G2M to keep
them consistent.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230117232609.477247-1-aford173@gmail.com
Link: https://lore.kernel.org/r/20230117232609.477247-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adam Ford [Sat, 14 Jan 2023 22:56:47 +0000 (16:56 -0600)]
arm64: dts: renesas: beacon-renesom: Fix audio clock rate
The WM8962 is configured so the SoC is driving the clock, and it's
currently set to 24 MHz. However, when playing audio it shows the
following message:
wm8962 5-001a: Unsupported sysclk ratio 500
While not harmful, a better clock ratio is 512. It makes the
message disappear, and it still plays sound.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230114225647.227972-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adam Ford [Sat, 14 Jan 2023 22:56:46 +0000 (16:56 -0600)]
arm64: dts: renesas: beacon-renesom: Update Ethernet PHY ID
Due to the part shortage, the AR8031 PHY was replaced with a Micrel
KSZ9131. Hard-coding the ID of the PHY makes this new PHY
non-operational on newer hardware. Since previous hardware had only
shipped to a limited number of people, and they have not gone to
production, it should be safe to update the PHY ID.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230114225647.227972-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adam Ford [Sat, 14 Jan 2023 22:56:45 +0000 (16:56 -0600)]
arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H]
boards had a GPIO expander with address 20, but this was changed when
the final board went to production.
The production boards changed both the part itself and the address.
With the incorrect address, the LCD cannot come up. If the LCD fails,
the rcar-du driver fails to come up, and that also breaks HDMI.
Pre-release board were not shipped to the general public, so it should
be safe to push this as a fix. Anyone with a production board would
have video fail due to this GPIO expander change.
Fixes:
a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230114225647.227972-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Yoshihiro Shimoda [Fri, 13 Jan 2023 13:46:39 +0000 (22:46 +0900)]
arm64: dts: renesas: spider-cpu: Enable UFS device
Enable UFS device for R-Car S4-8 Spider CPU board.
Note that the conditions of RC21012 on the Spider are:
- OUT11 (for UFS30_REFCLK_V) is disabled as default.
- OUT11 is controlled by GPIO0 pin.
- The GPIO0 pin is inverted sense (low active) and pull-up enabled.
To output the clock, pin 4 of TCA9554 on the Spider board needs to
output low level so that using "gpio-gate-clock" for it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230113134639.338908-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
David Heidelberg [Thu, 26 Jan 2023 19:37:32 +0000 (20:37 +0100)]
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
No functional changes.
Adjust to comply with dt-schema requirements
and make it possible to validate values.
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230126193732.69699-1-david@ixit.cz
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:33 +0000 (02:04 +0000)]
arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card MIX + TDM Split dtsi
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio
Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori
Morimoto wants to test these.
The Generic Audio Card driver had been requested on ALSA SoC.
It supports many types of device connection methods, and historically,
the requested connection support range of the generic driver has been
upgraded.
Upgrading the connection support range itself could not be implemented
in the generic driver, because we need to keep compatibility with old
DTBs. This is one of the reasons why we have many types of Generic Audio
Card driver.
The ULCB/KF combo is a good board stack to test these.
Kuninori has been testing these Generic Audio Card drivers by using his
local patches to switching drivers. But from an information sharing
point of view, it is a good idea to upstream these, because the DT
configuration is complex. Hence this can be a good sample for the user.
Hence add a "Simple Audio Card + MIXer + TDM Split" DT setting file for
ULCB/KF. Because of the limited number of subdevices, the HDMI output
is ignored.
This setting can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi.
From a normal user point of view who doesn't need to test the driver,
everything should stay as-is, and nothing changes.
Note that because this needs "switching driver", and not "adding extra
feature", this does not use a Device Tree overlay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/874jsvi40e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:27 +0000 (02:04 +0000)]
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card MIX + TDM Split dtsi
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio
Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori
Morimoto wants to test these.
The Generic Audio Card driver had been requested on ALSA SoC.
It supports many types of device connection methods, and historically,
the requested connection support range of the generic driver has been
upgraded.
Upgrading the connection support range itself could not be implemented
in the generic driver, because we need to keep compatibility with old
DTBs. This is one of the reasons why we have many types of Generic Audio
Card driver.
The ULCB/KF combo is a good board stack to test these.
Kuninori has been testing these Generic Audio Card drivers by using his
local patches to switching drivers. But from an information sharing
point of view, it is a good idea to upstream these, because the DT
configuration is complex. Hence this can be a good sample for the user.
Hence add an "Audio Graph Card + MIXer + TDM Split" DT setting file for
ULCB/KF. Because of the limited number of subdevices, the HDMI output
is ignored.
This setting can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi.
From a normal user point of view who doesn't need to test the driver,
everything should stay as-is, and nothing changes.
Note that because this needs "switching driver", and not "adding extra
feature", this does not use a Device Tree overlay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/875ydbi40l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:22 +0000 (02:04 +0000)]
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 MIX + TDM Split dtsi
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio
Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori
Morimoto wants to test these.
The Generic Audio Card driver had been requested on ALSA SoC.
It supports many types of device connection methods, and historically,
the requested connection support range of the generic driver has been
upgraded.
Upgrading the connection support range itself could not be implemented
in the generic driver, because we need to keep compatibility with old
DTBs. This is one of the reasons why we have many types of Generic Audio
Card driver.
The ULCB/KF combo is a good board stack to test these.
Kuninori has been testing these Generic Audio Card drivers by using his
local patches to switching drivers. But from an information sharing
point of view, it is a good idea to upstream these, because the DT
configuration is complex. Hence this can be a good sample for the user.
Hence add an "Audio Graph Card2 + MIXer + TDM Split" DT setting file
for ULCB/KF. Because of the limited number of subdevices, the HDMI
output is ignored.
This setting can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi.
From a normal user point of view who doesn't need to test the driver,
everything should stay as-is, and nothing changes.
Note that because this needs "switching driver", and not "adding extra
feature", this does not use a Device Tree overlay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/877cxri40q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:17 +0000 (02:04 +0000)]
arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card dtsi
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio
Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori
Morimoto wants to test these.
The Generic Audio Card driver had been requested on ALSA SoC.
It supports many types of device connection methods, and historically,
the requested connection support range of the generic driver has been
upgraded.
Upgrading the connection support range itself could not be implemented
in the generic driver, because we need to keep compatibility with old
DTBs. This is one of the reasons why we have many types of Generic Audio
Card driver.
The ULCB/KF combo is a good board stack to test these.
Kuninori has been testing these Generic Audio Card drivers by using his
local patches to switching drivers. But from an information sharing
point of view, it is a good idea to upstream these, because the DT
configuration is complex. Hence this can be a good sample for the user.
Hence add a "Simple Audio Card" DT setting file for ULCB/KF.
This can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi.
From a normal user point of view who doesn't need to test the driver,
everything should stay as-is, and nothing changes.
Note that because this needs "switching driver", and not "adding extra
feature", this does not use a Device Tree overlay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/878ri7i40u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:13 +0000 (02:04 +0000)]
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 dtsi
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio
Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori
Morimoto wants to test these.
The Generic Audio Card driver had been requested on ALSA SoC.
It supports many types of device connection methods, and historically,
the requested connection support range of the generic driver has been
upgraded.
Upgrading the connection support range itself could not be implemented
in the generic driver, because we need to keep compatibility with old
DTBs. This is one of the reasons why we have many types of Generic Audio
Card driver.
The ULCB/KF combo is a good board stack to test these.
Kuninori has been testing these Generic Audio Card drivers by using his
local patches to switching drivers. But from an information sharing
point of view, it is a good idea to upstream these, because the DT
configuration is complex. Hence this can be a good sample for the user.
Hence add an "Audio Graph Card2" DT setting file for ULCB/KF,
and switch to use it. You can switch to a different Generic Audio Graph
driver by updating ulcb.dtsi / ulcb-kf.dtsi.
From a normal user point of view who doesn't need to test the driver,
everything should stay as-is, and nothing changes.
Note that because this needs "switching driver", and not "adding extra
feature", this does not use a Device Tree overlay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87a62ni40z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:08 +0000 (02:04 +0000)]
arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card dtsi
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio
Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori
Morimoto wants to test these.
The Generic Audio Card driver had been requested on ALSA SoC.
It supports many types of device connection methods, and historically,
the requested connection support range of the generic driver has been
upgraded.
Upgrading the connection support range itself could not be implemented
in the generic driver, because we need to keep compatibility with old
DTBs. This is one of the reasons why we have many types of Generic Audio
Card driver.
The ULCB/KF combo is a good board stack to test these.
Kuninori has been testing these Generic Audio Card drivers by using his
local patches to switching drivers. But from an information sharing
point of view, it is a good idea to upstream these, because the DT
configuration is complex. Hence this can be a good sample for the user.
Hence add an "Audio Graph Card" DT setting file for ULCB/KF.
This can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi.
From a normal user point of view who doesn't need to test the driver,
everything should stay as-is, and nothing changes.
Note that because this needs "switching driver", and not "adding extra
feature", this does not use a Device Tree overlay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87bkn3i414.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:04:03 +0000 (02:04 +0000)]
arm64: dts: renesas: #sound-dai-cells is used when simple-card
Current sound comment is indicating that #sound-dai-cells is required,
but it is needed only if board is using "simple-card".
Hence tidy up the comments.
As ulcb.dtsi and salvator-common.dtsi are already using "audio-graph",
the unneeded #sound-dai-cells are removed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cz7ji418.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Fri, 13 Jan 2023 02:03:58 +0000 (02:03 +0000)]
ARM: dts: renesas: #sound-dai-cells is used when simple-card
Current sound comment is indicating that #sound-dai-cells is required,
but it is needed only if the board is using "simple-card".
Hence tidy up the comments.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87edrzi41e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Mon, 9 Jan 2023 13:35:48 +0000 (14:35 +0100)]
arm64: dts: renesas: eagle: Add SCIF_CLK support
Describe the external SCIF clock crystal, which can be used as a clock
source for the (High Speed) Serial Communication Interfaces with FIFO.
This improves serial console accuracy from 115200-257 bps to
115200+0 bps.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7dddaa362945118deab534ccfddfc0870abe8526.1673271243.git.geert+renesas@glider.be