Harald Hoyer [Wed, 31 Jul 2013 09:31:13 +0000 (11:31 +0200)]
fips: handle checksum checks for RHEV kernels
https://bugzilla.redhat.com/show_bug.cgi?id=947729
Harald Hoyer [Wed, 31 Jul 2013 09:26:46 +0000 (11:26 +0200)]
fips: cope with module aliases, when checking modules
Also do not fail, if module aliases try to load CPU specific modules
like crc32c_intel.
Harald Hoyer [Wed, 31 Jul 2013 09:23:51 +0000 (11:23 +0200)]
TEST-30-ISCSI: eth0 -> ens3
Harald Hoyer [Wed, 31 Jul 2013 09:00:29 +0000 (11:00 +0200)]
remove "< <(" syntax
bash seems to want /dev/fd in that case. dracut is sometimes called in
environments, where /proc and /dev are not mounted.
Harald Hoyer [Wed, 31 Jul 2013 08:59:25 +0000 (10:59 +0200)]
TEST-50-MULTINIC: change interface names to ens*
Harald Hoyer [Wed, 31 Jul 2013 07:57:57 +0000 (09:57 +0200)]
TEST-10: double disk space
Harald Hoyer [Tue, 30 Jul 2013 14:21:59 +0000 (16:21 +0200)]
dracut.spec: add bcache and modsign module
Harald Hoyer [Tue, 30 Jul 2013 14:19:03 +0000 (16:19 +0200)]
base/init.sh: create static device nodes with kmod
Harald Hoyer [Tue, 30 Jul 2013 14:18:28 +0000 (16:18 +0200)]
systemd/dracut-pre-trigger.service: run after systemd-tmpfiles-setup-dev
Harald Hoyer [Tue, 30 Jul 2013 14:18:03 +0000 (16:18 +0200)]
systemd: include systemd-tempfiles
Harald Hoyer [Tue, 30 Jul 2013 13:33:10 +0000 (15:33 +0200)]
dracut.sh: check for file existance before trying to read from it
Harald Hoyer [Tue, 30 Jul 2013 10:36:12 +0000 (12:36 +0200)]
base: hard depend on systemd, if system was started by systemd
James Lee [Mon, 29 Jul 2013 20:10:22 +0000 (16:10 -0400)]
crypt: Wait for udev to settle before unlocking disk
To eliminate a race condition that occurs when unlocking one device
depends on the result of unlocking a device before it, the crypt
module must wait for udev to settle between each unlock attempt.
Example
/etc/crypttab:
keyfile /dev/md1 none luks
sda4_crypt /dev/sda4 /dev/mapper/keyfile luks
sdb4_crypt /dev/sdb4 /dev/mapper/keyfile luks
Without this patch, sometimes /dev/sda4 fails to unlock because udev
doesn't have time to create /dev/mapper/keyfile before it's needed.
Harald Hoyer [Tue, 30 Jul 2013 13:25:44 +0000 (15:25 +0200)]
url-lib/module-setup.sh: fixed grepping libcurl
Harald Hoyer [Tue, 30 Jul 2013 13:24:05 +0000 (15:24 +0200)]
mdraid/mdmon-pre-shutdown.sh: removed unneeded code
Harald Hoyer [Tue, 30 Jul 2013 13:14:59 +0000 (15:14 +0200)]
base/dracut-lib.sh: check for /proc/cmdline existance
Harald Hoyer [Tue, 30 Jul 2013 11:27:36 +0000 (13:27 +0200)]
dracut.spec: fix typo
Harald Hoyer [Tue, 30 Jul 2013 09:58:33 +0000 (11:58 +0200)]
systemd: add support for kmod static devnodes
Harald Hoyer [Mon, 29 Jul 2013 14:06:28 +0000 (16:06 +0200)]
network:ifup handle bootif style interfaces
e.g. ip=77-77-6f-6f-64-73:dhcp
Amadeusz Żołnowski [Thu, 25 Jul 2013 18:24:56 +0000 (20:24 +0200)]
LatArCyrHeb-16 as a default i18n font for Gentoo
Amadeusz Żołnowski [Thu, 25 Jul 2013 21:28:44 +0000 (23:28 +0200)]
crypt: Skip /etc/crypttab if not present
Prevents following error message:
I: *** Including module: crypt ***
/usr/lib/dracut/modules.d/90crypt/module-setup.sh: line 31: /etc/crypttab: No such file or directory
Harald Hoyer [Wed, 24 Jul 2013 12:35:19 +0000 (14:35 +0200)]
bcache: add support for bcache
Harald Hoyer [Wed, 24 Jul 2013 11:43:32 +0000 (13:43 +0200)]
dracut.sh: check for /sbin /bin /lib
use readlink to detect, if /usr has to be mounted
Harald Hoyer [Wed, 24 Jul 2013 11:42:17 +0000 (13:42 +0200)]
add debian udev rule files
Harald Hoyer [Wed, 24 Jul 2013 11:41:15 +0000 (13:41 +0200)]
usrmount: do not install, if /sbin/init does not live in /usr
Harald Hoyer [Wed, 24 Jul 2013 11:38:57 +0000 (13:38 +0200)]
dracut-functions.sh:get_fs_env() fallback to blkid for ID_FS_TYPE not found
Harald Hoyer [Wed, 24 Jul 2013 08:34:19 +0000 (10:34 +0200)]
modsign: do not install, if no keys present
also fixed inst_hook
Kyle McMartin [Wed, 24 Jul 2013 02:07:05 +0000 (22:07 -0400)]
dracut: 90kernel-modules/module-setup.sh: add ehci-tegra.ko on arm
kernel-tegra is now part of the base kernel package, so bits and pieces
ended up modular, and as a result, if you boot off the internal USB, you
drop to a dracut shell with no way of getting to root.
Peter Jones [Tue, 23 Jul 2013 19:22:45 +0000 (15:22 -0400)]
Load kernel module signing keys before we start doing any real work.
This loads kernel module signing keys, so that we can verify signed
modules in secure boot mode.
Signed-off-by: Peter Jones <pjones@redhat.com>
Brandon Philips [Tue, 23 Jul 2013 01:17:02 +0000 (18:17 -0700)]
95rootfs-block: fix PARTUUID parsing
In the kernel comments PARTUUID is shown using uppercase A-F:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/init/do_mounts.c?id=HEAD#n183
However, dracut tries to use the value of PARTUUID directly in
/dev/disks/by-partuuid/ which expects the hex to be lowercase. This will
cause root to never be found, oops!
Fix dracut so it can, like the Kernel, accept either casing.
Untested but I added a hack on my local system that was similar.
Colin Walters [Fri, 19 Jul 2013 00:16:10 +0000 (20:16 -0400)]
systemd: Replace prefdm.service with display-manager.service
The former is dead, the latter is the new name. See:
http://cgit.freedesktop.org/systemd/systemd/commit/?id=
b2c9cbafb8b1a2742978e1faf37fbb3cf4fb5d44
https://fedoraproject.org/wiki/Features/DisplayManagerRework
Harald Hoyer [Tue, 23 Jul 2013 10:33:45 +0000 (12:33 +0200)]
base: provide pidof() shell function
Harald Hoyer [Tue, 23 Jul 2013 10:26:06 +0000 (12:26 +0200)]
init.sh: don't check for systemd-udevd in lower version branch
Harald Hoyer [Tue, 23 Jul 2013 10:25:38 +0000 (12:25 +0200)]
dracut.spec: require procps-ng for ps
Harald Hoyer [Fri, 19 Jul 2013 07:46:00 +0000 (09:46 +0200)]
dracut: use sysloglvl for systemd-cat logging
Harald Hoyer [Fri, 19 Jul 2013 07:34:45 +0000 (09:34 +0200)]
Use systemd-cat for logging on systemd systems, if logfile is empty
Harald Hoyer [Fri, 19 Jul 2013 07:34:04 +0000 (09:34 +0200)]
dracut-functions.sh: only wait for the last pid spawned
Harald Hoyer [Fri, 19 Jul 2013 07:33:45 +0000 (09:33 +0200)]
dracut-functions.sh: don't warn twice about omitted modules
Harald Hoyer [Thu, 18 Jul 2013 12:41:31 +0000 (14:41 +0200)]
resume: do not include in hostonly, if no swap is present
Harald Hoyer [Wed, 17 Jul 2013 13:05:30 +0000 (15:05 +0200)]
Revert "systemd: add systemd-fsck-root.service"
This reverts commit
35857f556ce9150f37a194e5c9f840212eef0870.
Harald Hoyer [Wed, 17 Jul 2013 12:58:44 +0000 (14:58 +0200)]
AUTHORS: update
Harald Hoyer [Wed, 17 Jul 2013 12:58:35 +0000 (14:58 +0200)]
NEWS: update
Harald Hoyer [Wed, 17 Jul 2013 12:35:35 +0000 (14:35 +0200)]
dracut: do not enable early microcode inclusion by default
Harald Hoyer [Wed, 17 Jul 2013 12:31:59 +0000 (14:31 +0200)]
rename sosreport to rdsosreport
Renamed sosreport to rdsosreport to differ from the sosreport tool on
the real root.
Harald Hoyer [Wed, 17 Jul 2013 10:29:31 +0000 (12:29 +0200)]
rename dracut-nohostonly and dracut-norescue rpm subpackages
dracut-nohostonly -> dracut-config-generic
dracut-norescue -> dracut
-> dracut-config-rescue
Harald Hoyer [Wed, 17 Jul 2013 10:07:19 +0000 (12:07 +0200)]
dmraid: let dmraid setup the partitions
Harald Hoyer [Wed, 17 Jul 2013 10:03:01 +0000 (12:03 +0200)]
do not wait_for_dev for the root device
it's specified on the kernel command line
Harald Hoyer [Wed, 17 Jul 2013 09:59:46 +0000 (11:59 +0200)]
systemd: add systemd-fsck-root.service
Harald Hoyer [Wed, 17 Jul 2013 09:58:55 +0000 (11:58 +0200)]
rootfs-block: do not touch root-fsck
in systemd environments, we use systemd in the initramfs
Harald Hoyer [Wed, 17 Jul 2013 09:58:17 +0000 (11:58 +0200)]
i18n: do not moan about missing kbd directory
Harald Hoyer [Wed, 17 Jul 2013 09:26:55 +0000 (11:26 +0200)]
base: remove RD_TIMESTAMP
Konrad Rzeszutek Wilk [Fri, 12 Jul 2013 21:02:54 +0000 (17:02 -0400)]
dracut.sh: Support early microcode loading.
On Wed, Jul 10, 2013 at 10:58:15AM -0400, Konrad Rzeszutek Wilk wrote:
> On Wed, Jul 10, 2013 at 09:37:11AM +0200, Harald Hoyer wrote:
> > On 07/10/2013 02:29 AM, Yu, Fenghua wrote:
> > >> From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> > >> Sent: Tuesday, July 09, 2013 12:24 PM
> > >> Implement it per Linux kernel Documentation/x86/early-microcode.txt
> > >> (from v3.11-rc0):
> > [...]
> > > This patch works fine with one microcode blob in binary format. There are situations that the microcode is not delivered in one blob in binary format:
> > >
> > > First, each microcode patch is one file instead all microcode patches are in one big blob. Secondly, old delivered microcode file is in ascii format.
> > >
> > > To handle those formats, additional code needs to convert the formats into one big binary microcode blob. I'm not sure if we should consider the code and if we should put the code in dracut.
> > >
> > > Thanks.
> > >
> > > -Fenghua
> > >
> >
> >
> > $ ls /lib/firmware/amd-ucode
> > microcode_amd.bin microcode_amd_fam15h.bin microcode_amd_solaris.bin
>
> Right, so all of those blobs (for AMD) get stuck in AuthenticAMD.bin.
>
> > $ ls /lib/firmware/intel-ucode
> > 06-03-02 06-06-00 06-07-02 06-08-0a 06-0b-04 06-0f-06 06-16-01 06-1c-02
> > 06-25-02 06-2d-07 0f-01-02 0f-02-09 0f-04-03 0f-04-0a
> > 06-05-00 06-06-05 06-07-03 06-09-05 06-0d-06 06-0f-07 06-17-06 06-1c-0a
> > 06-25-05 06-2f-02 0f-02-04 0f-03-02 0f-04-04 0f-06-02
> > 06-05-01 06-06-0a 06-08-01 06-0a-00 06-0e-08 06-0f-0a 06-17-07 06-1d-01
> > 06-26-01 06-3a-09 0f-02-05 0f-03-03 0f-04-07 0f-06-04
> > 06-05-02 06-06-0d 06-08-03 06-0a-01 06-0e-0c 06-0f-0b 06-17-0a 06-1e-04
> > 06-2a-07 0f-00-07 0f-02-06 0f-03-04 0f-04-08 0f-06-05
> > 06-05-03 06-07-01 06-08-06 06-0b-01 06-0f-02 06-0f-0d 06-1a-04 06-1e-05
> > 06-2d-06 0f-00-0a 0f-02-07 0f-04-01 0f-04-09 0f-06-08
>
> And all of those get catted in GenuineIntel.bin.
>
> >
> > Also, for [[ $hostonly ]], we only want to add the current running CPU microcode.
>
> <nods> Will do that. Are you OK with me adding some of this CPU detection logic
> in dracut-functions.sh?
This is still RFC, as I had not done the --no-compress logic (or tested it).
Please see if this is OK:
>From
5f853d2ececd4cadff648e22cb9c9287a01a9783 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Tue, 9 Jul 2013 13:57:01 -0400
Subject: [PATCH] dracut.sh: Support early microcode loading.
Implement it per Linux kernel Documentation/x86/early-microcode.txt
(from v3.11-rc0):
<start>
Early load microcode
====================
By Fenghua Yu <fenghua.yu@intel.com>
Kernel can update microcode in early phase of boot time. Loading microcode early
can fix CPU issues before they are observed during kernel boot time.
Microcode is stored in an initrd file. The microcode is read from the initrd
file and loaded to CPUs during boot time.
The format of the combined initrd image is microcode in cpio format followed by
the initrd image (maybe compressed). Kernel parses the combined initrd image
during boot time. The microcode file in cpio name space is:
on Intel: kernel/x86/microcode/GenuineIntel.bin
on AMD : kernel/x86/microcode/AuthenticAMD.bin
During BSP boot (before SMP starts), if the kernel finds the microcode file in
the initrd file, it parses the microcode and saves matching microcode in memory.
If matching microcode is found, it will be uploaded in BSP and later on in all
APs.
The cached microcode patch is applied when CPUs resume from a sleep state.
There are two legacy user space interfaces to load microcode, either through
/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file
in sysfs.
In addition to these two legacy methods, the early loading method described
here is the third method with which microcode can be uploaded to a system's
CPUs.
The following example script shows how to generate a new combined initrd file in
/boot/initrd-3.5.0.ucode.img with original microcode microcode.bin and
original initrd image /boot/initrd-3.5.0.img.
mkdir initrd
cd initrd
mkdir -p kernel/x86/microcode
cp ../microcode.bin kernel/x86/microcode/GenuineIntel.bin (or AuthenticAMD.bin)
find . | cpio -o -H newc >../ucode.cpio
cd ..
cat ucode.cpio /boot/initrd-3.5.0.img >/boot/initrd-3.5.0.ucode.img
<end>
That is what we do in the patch. Furthermoere there is also
an off-switch: "no-early-microcode" to disable it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Support --host-only parameter]
Harald Hoyer [Fri, 12 Jul 2013 08:35:49 +0000 (10:35 +0200)]
dracut.sh: correct dropindirs_sort
Harald Hoyer [Fri, 12 Jul 2013 08:14:42 +0000 (10:14 +0200)]
base/module-setup.sh: do not add devs to initqueue/finished
when need-initqueue is not set in systemd mode
Harald Hoyer [Fri, 12 Jul 2013 08:13:49 +0000 (10:13 +0200)]
base/module-setup.sh: do not include systemd-timestamp
when using systemd in the initramfs
Harald Hoyer [Fri, 12 Jul 2013 07:47:24 +0000 (09:47 +0200)]
dracut-cmdline.service: remove Before: systemd-vconsole-setup.service
Harald Hoyer [Thu, 11 Jul 2013 10:15:17 +0000 (12:15 +0200)]
systemd/module-setup.sh: create emtpy /etc/machine-id
Even in hostonly mode, if none was found on the system.
Harald Hoyer [Fri, 5 Jul 2013 14:21:50 +0000 (16:21 +0200)]
dracut.sh: unset all LC_* and LANG
saves 10% of time :-)
Harald Hoyer [Fri, 5 Jul 2013 13:33:28 +0000 (15:33 +0200)]
modules.d/10i18n/module-setup.sh: handle empty vconsole.conf
if /etc/vconsole.conf exists and is empty, then do not install anything.
Harald Hoyer [Fri, 5 Jul 2013 13:32:58 +0000 (15:32 +0200)]
terminfo: only install l/linux v/vt100 and v/vt220
Harald Hoyer [Fri, 5 Jul 2013 13:31:06 +0000 (15:31 +0200)]
add PARTLABEL and PARTUUID
Harald Hoyer [Thu, 4 Jul 2013 10:31:31 +0000 (12:31 +0200)]
masterkey/module-setup.sh:check() check for $hostonly rather than "-h"
Harald Hoyer [Thu, 4 Jul 2013 10:29:59 +0000 (12:29 +0200)]
beautified shell code
checked with shellcheck http://www.shellcheck.net/about.html
Harald Hoyer [Fri, 28 Jun 2013 08:31:18 +0000 (10:31 +0200)]
use "rm --" to guard against filenames beginning with "-"
Harald Hoyer [Fri, 28 Jun 2013 08:22:27 +0000 (10:22 +0200)]
TEST-04-FULL-SYSTEMD/test.sh: dlfgjlkdfjgldfj
Harald Hoyer [Fri, 28 Jun 2013 08:21:42 +0000 (10:21 +0200)]
test/run-qemu: specify the kernel
Harald Hoyer [Fri, 28 Jun 2013 07:58:03 +0000 (09:58 +0200)]
systemd/module-setup.sh: add slices.target
Harald Hoyer [Wed, 26 Jun 2013 07:16:04 +0000 (09:16 +0200)]
TEST-04-FULL-SYSTEMD: call xargs with "-r"
Harald Hoyer [Wed, 26 Jun 2013 07:15:34 +0000 (09:15 +0200)]
systemd: add system.slice unit
Harald Hoyer [Mon, 24 Jun 2013 10:47:01 +0000 (12:47 +0200)]
use findmnt with "--source" or "--target"
This avoids hanging on stale NFS mounts, which are not part of the boot
process.
https://bugzilla.redhat.com/show_bug.cgi?id=975401
Harald Hoyer [Tue, 18 Jun 2013 15:54:30 +0000 (17:54 +0200)]
udev-rules: add 75-net-description.rules
we need IMPORT{builtin}="net_id" for the persistent network names
WANG Chao [Tue, 18 Jun 2013 05:58:04 +0000 (13:58 +0800)]
selinux: umount $NEWROOT/dev and its submounts
$NEWROOT/dev and its submounts should be umounted after we use it.
Otherwise it fails other scripts that umount /sysroot only.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Harald Hoyer [Fri, 14 Jun 2013 13:31:28 +0000 (15:31 +0200)]
NEWS: update
Baoquan He [Thu, 13 Jun 2013 08:07:44 +0000 (16:07 +0800)]
90lvm/module-setup.sh: redirect error message of lvs to /dev/null
Signed-off-by: Baoquan He <bhe@redhat.com>
Harald Hoyer [Thu, 13 Jun 2013 13:15:55 +0000 (15:15 +0200)]
test/TEST-50-MULTINIC: fix interface test
Harald Hoyer [Thu, 13 Jun 2013 12:45:18 +0000 (14:45 +0200)]
network: refix BOOTIF logic
Harald Hoyer [Thu, 13 Jun 2013 12:44:47 +0000 (14:44 +0200)]
test/TEST-50-MULTINIC: fixed debug output
Harald Hoyer [Thu, 13 Jun 2013 12:44:13 +0000 (14:44 +0200)]
systemd/module-setup.sh: mkdir /etc/systemd
Will Woods [Thu, 13 Sep 2012 15:22:02 +0000 (11:22 -0400)]
net-lib: fix set_ifname()
/sys/class/$name$num isn't ever going to work; /sys/class/net/$name$num
(e.g. /sys/class/net/ibft0) should work right.
Will Woods [Thu, 13 Sep 2012 14:52:33 +0000 (10:52 -0400)]
net-lib: add configured_ifaces()
configured_ifaces is a function that returns the names of each interface
that the user wanted configured.
Currently, this is accomplished by reading the list from
/tmp/net.ifaces. But if we want to allow the user to specify an
interface by its MAC address or IP or something, we need a function that
will read the cache and convert the MACs etc. to names.
(Obviously this conversion only works once udev starts, so it will warn
you if you try it too early.)
Will Woods [Thu, 23 Aug 2012 20:31:09 +0000 (16:31 -0400)]
net-lib: add find_iface_with_link()
Add a function to look at the system network interfaces and return the
first one it finds with an active link (if any.)
Will Woods [Thu, 23 Aug 2012 18:59:35 +0000 (14:59 -0400)]
Don't explode when mixing BOOTIF and ip=
Now that we can use a MAC as a device identifier, we can just bring up
the device specified by BOOTIF as a normal interface.
So instead of ignoring everything but BOOTIF, we'll put BOOTIF in the
IFACES list and bring it up as normal, defaulting to DHCP if nothing
else is specified.
We can also handle anaconda-style 'ksdevice=bootif' this way.
Will Woods [Wed, 22 Aug 2012 20:59:16 +0000 (16:59 -0400)]
net-genrules: accept MAC address for $iface, cleanups
A MAC address is a unique identifier for a particular network interface.
We can use the MAC to generate udev rules to bring up that interface,
like we currently do with BOOTIF.
This patch allows interfaces to be specified as a MAC address, either
in the usual colon-separated form or the PXE-style dash-separated form.
(The latter is more useful on the commandline, since it allows for
arguments like: "ip=77-77-6f-6f-64-73:dhcp")
This is useful since it's common for a user who is booting a new OS for
the first time to know the MAC of the device, but not know what the
kernel name will be.
Will Woods [Wed, 22 Aug 2012 16:57:43 +0000 (12:57 -0400)]
move fix_bootif to net-lib
This might be useful to other parts of dracut; move it to net-lib.sh.
Harald Hoyer [Thu, 13 Jun 2013 10:05:10 +0000 (12:05 +0200)]
Makefile: source dracut-version.sh and correct dist tarball
Harald Hoyer [Thu, 13 Jun 2013 09:58:00 +0000 (11:58 +0200)]
Makefile: pipe git describe errors to /dev/null
Harald Hoyer [Thu, 13 Jun 2013 09:53:32 +0000 (11:53 +0200)]
add dracut-shutdown.service.8.asc manpage
Harald Hoyer [Thu, 13 Jun 2013 09:40:58 +0000 (11:40 +0200)]
move dracut-shutdown.service to modules.d/98systemd
Harald Hoyer [Thu, 13 Jun 2013 09:09:52 +0000 (11:09 +0200)]
Don't use do syncheck for target all and refine syncheck
instead of "dash -n" we now use "bash --posix -n"
we also check for "[[ " in posix shell files
Harald Hoyer [Thu, 13 Jun 2013 08:52:46 +0000 (10:52 +0200)]
systemd: make unit files symlinks
Harald Hoyer [Thu, 13 Jun 2013 08:37:45 +0000 (10:37 +0200)]
systemd/dracut-pre-pivot.service: also execute for cleanup hooks or rd.break
Harald Hoyer [Thu, 13 Jun 2013 07:29:17 +0000 (09:29 +0200)]
i18n: make the default font configurable
To set the default font for your distribution, add
i18n_default_font="latarcyrheb-sun16"
to your /lib/dracut/dracut.conf.d/01-dist.conf distribution config.
Harald Hoyer [Wed, 12 Jun 2013 15:42:35 +0000 (17:42 +0200)]
network: wait 40 seconds for IPv6 auto configuration
https://bugzilla.redhat.com/show_bug.cgi?id=973719
Harald Hoyer [Wed, 12 Jun 2013 11:29:39 +0000 (13:29 +0200)]
NEWS: update
Harald Hoyer [Wed, 12 Jun 2013 11:16:33 +0000 (13:16 +0200)]
rename kernel command line param action_on_fail to rd.action_on_fail
Harald Hoyer [Wed, 12 Jun 2013 10:43:14 +0000 (12:43 +0200)]
dmsquash-live/iso-scan: wait until the iso-scan/filename is found
Do not only run once, but wait until all devices are found.
Harald Hoyer [Fri, 7 Jun 2013 11:56:16 +0000 (13:56 +0200)]
systemd/dracut-initqueue.service: specify all initqueues
Harald Hoyer [Fri, 7 Jun 2013 10:39:46 +0000 (12:39 +0200)]
TODO: update
WANG Chao [Fri, 7 Jun 2013 09:50:56 +0000 (17:50 +0800)]
dracut-initqueue.service: Fix systemd start condition
Scripts in dracut initqueue hooks are placed under
/usr/lib/dracut/hooks/initqueue/*/ directory.
And also start initqueue service when kernel cmdline has
rd.break=initqueue
Signed-off-by: WANG Chao <chaowang@redhat.com>
Harald Hoyer [Thu, 6 Jun 2013 13:40:29 +0000 (15:40 +0200)]
udev-rules: add 80-net-name-slot.rules