staging: comedi: amplc_dio200: implement timer subdevice

Implement the timer subdevice for the new PCIe boards.  The subdevice was
previously marked as unused, but was reserved for this purpose.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add 32-bit register access functions

These are currently unused but will be used to support extra features of
the PCIe boards.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: extra clock and gate sources for amplc_dio200

Add constants to "comedi.h" for the extra clock and gate sources
allowed by the new PCIe cards supported by the "amplc_dio200" driver.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: allow extra clock and gate sources

One of the enhancements of the new PCIe boards is the addition of extra
clock and gate sources.  Allow clock and gate sources up to 31 for these
boards (compared to 7 for the old boards) although most of those are
reserved for future use.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: enable enhanced features of PCIe boards

The new PCIe boards PCIe215, PCIe236 and PCIe296 have some enhanced
features (over the older boards), although none of these features are
supported by this driver yet.

Enable the enhanced features in hardware and use `dio200_layouts[]` to
indicate which boards support the enhanced features.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: allow generation of PCIe interrupts

The new PCIe boards PCIe215, PCIe236 and PCIe296 need a special register
setting to allow generation of interrupts on the PCIe bus.  Add
`dio200_pcie_board_setup()` to do this and call it from
`dio200_attach_pci()` for those boards.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: support PCIe215, PCIe236 and PCIe296

Add preliminary support for the above PCIe boards.  The interrupt
subdevice is not working yet as the boards need some additional
initialization to enable interrupts.  Reserve an unused subdevice that
will eventually become a timer subdevice.

Some unused subdevices have been added between the used subdevices on
the PCIe215 and PCIe236.  This is so the subdevice numbers will match a
pattern-matching feature to be added at a later date, where the
pattern-match specifications for a subdevice include pattern-match
results from other subdevices, specified by index.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add register shift to board info

Add `mainshift` member to `struct dio200_board` to hold the amount of
left-shift required for main register offsets.  This is 0 for all the
boards currently supported so it doesn't need initializing explicitly in
any current element of `dio200_boards[]`.  It will be non-zero for some
new boards to be supported by this driver.

Modify the register access functions `dio200_read8()` and
`dio200_write8()` to take the shift into account.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add min register region size in board

Store the length of the main register region in new member `mainsize` of
`struct dio200_board` and initialize it in each element of
`dio200_boards[]`.  For all currently supported boards this is
initialized to `DIO200_IO_SIZE` (0x20), but will be different for newer
boards to be supported in the future.

For ISA boards, this is the actual region length requested, but for PCI
boards it's the minimum expected region length.  Verify that the PCI BAR
region length is sufficient in `dio200_attach_pci()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add PCI BAR information to board

Add `mainbar` member to `struct dio200_board` to hold the PCI BAR number
for the main registers.  This is `2` for the PCI boards currently
supported (PCI215 and PCI272) but will be different for some new boards
to be supported later.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: support memory-mapped I/O

The boards currently supported by this module all use port I/O.  Support
memory-mapped I/O as well for future PCI/PCIe cards.

Define `struct dio200_region` to hold the type of register access and
either the port I/O base address or an ioremapped MMIO address.  Add a
member `io` to the comedi device private data (`struct dio200_private`)
to hold this.  Use this instead of `dev->iobase`.  Memory-mapped
registers are mapped in `dio200_pci_attach()` and unmapped in
`dio200_detach()`.

`dio200_detach()` now uses the private data pointer `devpriv` set to
`dev->private` but can return early if it is `NULL` because no clean-up
needs to be done in that case.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: set dev->iobase before common attach

Don't pass the I/O base address to `dio200_common_attach()`.  The only
thing it does with it is set `dev->iobase` to the passed in value.  Do
that before calling `dio200_common_attach()` in order to simplify
upcoming support for different register access methods.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: use custom register access functions

Add custom functions to access hardware registers and call them instead
of calling `inb()` and `outb()` directly.  When additional cards are
supported by this driver requiring different register access methods,
the new functions will localize the register access differences to just
these functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: don't select COMEDI_8255

The "amplc_dio200" module no longer depends on the "8255" module, so the
'COMEDI_AMPLC_DIO200' Kconfig setting no longer needs to select
'COMEDI_8255'.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: internalize 8255 DIO implementation

Implement the '8255' DIO subdevice internally to this module instead of
using the external "8255" module.  I plan to add support for additional
cards to this driver that would require the I/O callback functionality
of the 8255 module, but the existing callback functions do not have much
context to handle this elegantly.  The additional cards also have extra
DIO features which cannot be handled by the existing "8255" module and
that I'd like to support some time in the future.

The bottom line is I _could_ continue using the "8255" module for a
while with a callback function, but it would turn out to be a very ugly
callback function and I'd have to ditch the use of the "8255" module as
soon as I added an extra feature to the DIO subdevice.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add functions to access 8254 counters

Add our own functions to manipulate the '8254' counter chip instead of
the inline ones from "8253.h".  This will make the code less messy when
we add code to support new boards later.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: use register offsets in subdevices

Replace the absolute, modified I/O base addresses in the private data
structures for the '8254' counter and 'intr' DIO subdevices with offsets
from the main I/O base address.  `dio200_subdev_intr_init()` now needs
the offset instead of the absolute address.  `dio200_subdev_8254_init()`
now only needs the offset instead of both the absolute address and the
offset.  The '8255' DIO subdevices are unaffected as they are handled by
the external "8255" module.

This change is not useful by itself but is an intermediate step for
later changes.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: remove 'has_clk_gat_sce' from subdevice

The `has_clk_gat_sce` member of `struct dio200_subdev_8254` indicates
whether the board has clock and gate source selection registers.  The
same information can be obtained from read-only board layout data so
doesn't need to be set per '8254' counter subdevice.  Eliminate the
member and use the read-only data instead.  The last parameter of
`dio200_subdev_8254_init()` is used to initialize this member, so remove
that parameter as well.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add helpers to get board layout

Add inline helper function `dio200_board_layout(board)` to get a pointer
to the board layout data for a board.  Add inline helper function
`dio200_dev_layout(dev)` to get a pointer to the board layout data for a
comedi device (this function is currently unused but will be used by a
later change).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: rename struct dio200_layout_struct

Now that the tag name `dio200_layout` is available, rename `struct
dio200_layout_struct` to `struct dio200_layout` as the `_struct` suffix
is a bit redundant and I plan to use this type in other places in the
module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: rename enum dio200_layout

Rename `enum dio200_layout` to `enum dio200_layout_idx`.  It's only used
once and frees up the `dio200_layout` tag for something else later.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: pass device to clock/gate config

Rename the clock and gate configuration functions for the '8254' counter
subdevices and pass in the pointers to the comedi device and comedi
subdevice.  This is just preparing the way for later changes.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: absorb dio200_pci_common_attach()

Absorb `dio200_pci_common_attach()` into `dio200_attach_pci()` since
that's the only place it is called from.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: no need to set hw_dev

The call to `comedi_set_hw_dev()` from `dio200_pci_common_attach()` is
now unnecessary since `dio200_pci_common_attach()` is now only called
from this driver's `attach_pci` hook `dio200_attach_pci()` and the
comedi core now calls `comedi_set_hw_dev()` before calling that.  Remove
the unnecessary call.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: no need to manipulate PCI ref count

Now that this driver no longer supports "manual" attachment of PCI
devices in its `attach` hook (`dio200_attach()`), it no longer has code
that searches for a suitable PCI device and increments its reference
count.  Since the driver no longer has any reason for incrementing and
decrementing the PCI device's reference count, the calls to
`pci_dev_get()` and `pci_dev_put()` can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: remove manual configuration of PCI boards

Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the "comedi_config" application).
Supported PCI boards will be attached automatically at probe time via
`comedi_pci_auto_config()` and the `attach_pci` hook in the `struct
comedi_driver`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: reformat driver comment

Reformat the driver description comment to use the preferred block
comment style so that future changes are acceptable to the checkpatch.pl
script.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: remove unused function prototypes

remove some of the function prototypes , they dont have a definition
of the function

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: remove the CsrTime typedef altogether

remove CsrTime typedef and replace all the users with the u32

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: Use pr_ or dev_ printks in drivers/unioxx5.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

and added pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: Use pr_ or dev_ printks in drivers/usbduxfast.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

and added pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: Use dev_ printks in drivers/vmk80xx.c

fixed below checkpatch warning.
- Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/sbe-2t3e3: Use netdev_ or dev_ or pr_ printks in module.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/sbe-2t3e3: Use netdev_ printks in main.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Remove CsrThreadHandle

CsrThreadHandle is typedef of struct CsrThread.
Some functions in csr_framework_ext.h use it as parameter.
But, nobody call them.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Remove struct CsrThread

Nobody use struct CsrThread. So, remove it.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: fix a frame size warning

gcc/sparse complain about the following:

drivers/staging/ced1401/ced_ioc.c:931:1: warning: the frame size of 4144 bytes is larger than 2048 bytes [-Wframe-larger-than=]

Fix it by dynamically allocating it.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "winbond" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: cleanup ni_660x_dio_insn_config()

This function handles all the insn_config instructions for the
digital i/o subdevice. These functions are supposed to return
the number of instruction parameters used (insn->n) or an -errno.
Fix the switch() so that the correct result is returned for all
INSN_CONFIG_* cases.

To clarify the code, add a local variable for the 'bit' used with
the instructions used to configure and query the input/output setting
of a channel.

For aesthetic reasons, add a whitespace between each case to improve
readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove ni660x_config_filter()

This simple function is only called by ni_660x_dio_insn_config().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove ni_660x_get_pfi_routing()

This simple function is only called by ni_660x_dio_insn_config().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove BUG_ON(chan >= NUM_PFI_CHANNELS)

This BUG_ON can never happen. The 'chan' value comes from the comedi
core in the insn->chanspec and will always be in range for the subdevice
number of channels (s->n_chan = NUM_PFI_CHANNELS).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove inline function board()

This function is used to get the dev->board_ptr from the
comedi_device. Remove the function and use a local variable
to hold the pointer where used. Use the comedi_board() helper
to get the pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: move module init code to EOF

Move the module init code to the end of the file. This removes
the need for all the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: get rid of slic_cmdqmem_init function

this function memset's the cmdqmem, instead do it in  slic_cmdq_init.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: remove default case in irqhandler

this default statement does nothing in the irqhandler, so remove it

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: return -ENOMEM if kzalloc fail

this takes up the error path cleanup,
fixes a crash too due to null deref

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: auto-config drivers do not need to set hw_dev

The comedi core now sets the 'hw_dev' pointer in the function
comedi_auto_config_helper() before calling the auto attach
function in the driver.

Remove the now unnecessary call to comedi_set_hw_dev() in the
drivers that use the auto-config attach mechanism.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove inline alloc_private()

This inline function has a very generic name and it's only a
wrapper around a simple kzalloc(). Since the inline function
does not save any lines-of-code, instead of renaming it just
remove it and do the kzalloc() directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/wlags49_h2/man: remove CONFIG_EXPERIMENTAL

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Henk de Groot <pe1dnn@amsat.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: InterfaceIdleMode.h: Checkpatch fixes

This fixes the following checkpatch issues:

WARNING: line over 80 characters
+INT InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *puiBuffer);

ERROR: "foo * bar" should be "foo *bar"
+INT InterfaceWakeUp(struct bcm_mini_adapter * Adapter);

Signed-off-by: Ceri James <jamesceri@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: LeakyBucket.c: Checkpatch fixes

This fixes the following checkpatch issues:

WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");

ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");
                         ^
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");

ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");
                         ^

Signed-off-by: Ceri James <jamesceri@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Fix i386 build warnings from use of dma_addr_t

dma_addr_t can be of size 64 or 32bits, depending on the architecture.

This fixes these build warnings for ARCH=i386, and also tested on x86_64:

drivers/staging/et131x/et131x.c: In function ‘et131x_rx_dma_memory_alloc’:
drivers/staging/et131x/et131x.c:2356:11: warning: passing argument 2 of ‘et131x_align_allocated_memory’ from incompatible pointer type [enabled by default]
drivers/staging/et131x/et131x.c:2260:13: note: expected ‘u64 *’ but argument is of type ‘dma_addr_t *’
drivers/staging/et131x/et131x.c:2378:11: warning: passing argument 2 of ‘et131x_align_allocated_memory’ from incompatible pointer type [enabled by default]
drivers/staging/et131x/et131x.c:2260:13: note: expected ‘u64 *’ but argument is of type ‘dma_addr_t *’
drivers/staging/et131x/et131x.c: In function ‘free_send_packet’:
drivers/staging/et131x/et131x.c:3540:5: warning: left shift count >= width of type [enabled by default]

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: remove ASSERT macro altogether

remove ASSERT and remove all its callers altogether in the code

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: fail out if we dont have a valid firmware file

fail instead calling request_firmware with filename as a null string
and return -ENOENT

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Remove USE_FBR0 define and #ifdefs

USE_FBR0 has always been defined, even in the original driver code.
Remove the define and #ifdef code to leave the code in the same state.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use upper_32_bits() instead of '>> 32'

'>> 32 of a 32bit value is undefined in C. The compiler is free
to do what it likes with this...'

Change all uses of '>> 32' to use upper_32_bits() and use
the corresponding lower_32_bits() to match.

Also remove an incorrect comment about dma alloc always returning 32bit
addresses.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Remove fbr_lookup.real_physaddr

fbr_lookup.real_physaddr is only being used as a pseudonym for
fbr_lookup.ring_physaddr, so remove it and rename all instances to
ring_physaddr.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Fix 64bit tx dma address handling

The driver checks that the device can handle 64bit DMA addressing in
et131x_pci_setup(), but then assumes that the top dword of a tx dma
address is always zero when creating a dma mapping in nic_send_packet().
Fix the mapping to use the higher dword of the dma_addr_t returned by
dma_map_single() and skb_frag_dma_map().

Also remove incorrect comments stating that dma_map_single() only returns
a 32 bit address.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use skb_headlen() where appropriate

(skb->len - skb->data_len) is used in several places in the et131x
driver code. Converted all instances of this to use skb_headlen()
which is more readable.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: fixed issues when config to built-in object

Fixed two issues when CONFIG_RTS5139=y :

  - Makefile doesn't take $(CONFIG_RTS5139). It always uses obj-m and built as
    a loadable module.
  - Rename some symbols with prefix 'rts51x_' to prevent symbol name collisions
    with drivers/staging/rts_pstor when both are configured to be built-in
    objects.

  drivers/staging/rts5139/built-in.o: In function `xd_cleanup_work':
  (.text+0x1435d): multiple definition of `xd_cleanup_work'
  drivers/staging/rts_pstor/built-in.o:(.text+0x2b96a): first defined here
  drivers/staging/rts5139/built-in.o: In function `release_xd_card':
  (.text+0x14393): multiple definition of `release_xd_card'
  drivers/staging/rts_pstor/built-in.o:(.text+0x2c491): first defined here
  drivers/staging/rts5139/built-in.o: In function `set_sense_data':
  (.text+0x1e02): multiple definition of `set_sense_data'
  drivers/staging/rts_pstor/built-in.o:(.text+0xa79f): first defined here
  drivers/staging/rts5139/built-in.o: In function `ms_delay_write':
  ...

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/carriers: fix missing include linux/slab.h

Kernel build failed for parisc architecture:

drivers/staging/ipack/carriers/tpci200.c: In function 'tpci200_free_irq':
drivers/staging/ipack/carriers/tpci200.c:190:2: error: implicit declaration of
function 'kfree' [-Werror=implicit-function-declaration]
drivers/staging/ipack/carriers/tpci200.c: In function 'tpci200_request_irq':
drivers/staging/ipack/carriers/tpci200.c:217:2: error: implicit declaration of
function 'kzalloc' [-Werror=implicit-function-declaration]

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: Fix up version.h includes

drivers/staging/silicom/bypasslib/bplibk.h actually uses stuff from
version.h so it should include the header.
drivers/staging/silicom/bp_proc.c and
drivers/staging/silicom/bypasslib/bypass.c currently include the
header but use nothing from it so they don't need to.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: remove version.h include from dgrp/dgrp_sysfs.c

The file uses nothing from linux/version.h, so the include is
pointless - remove it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Remove cpu_is_omapXXXX usage in DMM

Removed usage of the cpu_is_omapXXXX in the DMM driver.  This is no
longer necessary as we can key off of the omap_dmm pointer that is
only non-NULL if the device has been probed successfully.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: fix up compiler warnings in bp_proc.c

This removes the compiler warnings for unused variables and functions in
the bp_proc.c file.

Cc: Chad Williamson <chad@dahc.us>
Cc: Daniel Cotey <puff65537@bansheeslibrary.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/omap: Fix include error during make

Fixed include error for drm_mode.h

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: drop unused line6_index and line6_id arrays

The line6 driver does not support 'index' and 'id' module parameters so
there is no need to keep arrays for these values.  Do what other sound
drivers do and use the scalar constants instead of dummy arrays.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: drop unused line6_devices[] array

There is no reason to limit the number of line6 devices.  Drop the
static array.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ccg: rename ccg init and exit functions to conventional names

Previous names of init and exit functions "init" and "cleanup" are
unconventional and are not friendly for source navigation with tags.
New names "ccg_init" and "ccg_exit" are conveninal and source navigation
friendly.

Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: fix explicit intialization of procfs_dir in bp_proc.c

Remove explicit intialization of static procfs_dir to NULL, resolving a
checkpatch.pl error.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: remove unnecessary braces in bp_proc.c

Remove unnecessary braces from single statement blocks in bp_proc.c,
resolving checkpatch.pl warnings.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: remove parentheses from return statements in bg_proc.c

Remove unnecessary parentheses from return statements in bg_proc.c to
resolve checkpatch.pl errors.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: fix C99 comments in bp_proc.c

Fix C99 // comments in bp_proc.c to resolve checkpatch.pl errors.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: fix whitespace in bp_proc.c

Remove superfluous spaces in bp_proc.c to resolve checkpatch.pl errors.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: fix issue w/ fb attached to multiple CRTCs

When the fb is detached from one CRTC/plane, paddr was set back to
zero.  But really we don't want to do this because the fb could still
be attached to other CRTC/plane(s).  This originally worked like this
to catch cases of freeing a pinned fb (but with the refcnt'ing this
should no longer be needed).  Also, there is checking in the GEM code
for freeing a pinned GEM object, so this extra level of checking is
redundant.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Fix release of refill engine

During asynchronous refills, we don't wait for the refill to
finish.  However, we cannot release the engine back to the idle
list until it has actually completed the refill operation.  The
engine release will now be done in the IRQ handler, but only
for asynchronous refill operations.

Synchronous refills will continue to release the engine after they
unblock from waiting on the refill.

v2: Fixed review comments on async variable and bool type

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Use writecombine for descriptors

Use writecombine for descriptor and PAT programming memory.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Remove shadow lut usage

Removing extraneous shadow lut maintenance.  There is no need for
this to be in place until power management is added to the driver,
and this extra copy degrades performance for no gain.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: pointless check removal

bus_info is an array not a pointer. Fix silly if check

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgrp: fix some warnings

Just squashing these to get them out of the analysis queue.

nd_ps_desc is an array not a pointer so comparing it with NULL is silly (be
nice if gcc shouted about this). And there are some slightly pointless
comparisons too.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.8a' of git://git./linux/kernel/git/jic23/iio into staging-next

First round of new IIO drivers and cleanups for the 3.8 cycle.

Here we have

* New driver ad5449 with the introduction of a new IIO return type
  to simplify power of 2 dividers (extremely common case).
* Some coccinelle warning fixing patches (dull but worthwhile as
  make for easier automated testing and cut down on false positives).
* Some trivial bits of formatting cleanup and spelling corrections.
* Use kcalloc in a few places for semantic reasons.
* Stop lis3l02dq driver (soon to be dropped I hope) using now non
  existent irq_to_gpio.
* Some dead code/unused variable removal
* Convert a few drivers to generic core provided functions instead
  of their own versions.

So all in all a nice new driver and a lot of worthy but dull cleanup.

Staging: csr: fix code indent coding style issues in csr_wifi_hip_signals.h

This is a patch that fixes up code indent coding style warnings
in the csr_wifi_hip_signals.h found by checkpatch.pl tool.

Signed-off-by: Sunhee Hwang <sunheehwang821@gmail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: csr_wifi_router_ctrl_sef.c: fix line over 80 characters

This patch fixes line over 80 characters problem found by checkpatch.pl
tool.

Signed-off-by: Jugwan Eom <zugwan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: csr_wifi_router_ctrl_sef.c: fix tab mess

This patch converts spaces to tabs.

Signed-off-by: Jugwan Eom <zugwan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: csr_wifi_router_ctrl_sef.c: fix up brace placement

This patch fixes a brace placement error found by checkpatch.pl tool.

Signed-off-by: Jugwan Eom <zugwan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_sef.h: fixed indentation warnings

Fixed indentation warnings on comments

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_serialize.h: fixed indentation warnings

Fixed indentation warnings from the comments.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_sef.h: Fixed lines over 80 chars per line

Fixed lines over 80 characters per line.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_sef.h: Fixed from foo* bar to foo *bar

Fixed coding style errors like foo* bar to foo *bar for the definition
of input and output variables of the function interfaces.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_serialize.h: fixed over 80 char lines

Appropriately modified the lines over 80 characters.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_serialize.h: Fixed from foo* bar to foo *bar

Fixed the coding style convention warnings for the statements of the
pointer variable declaration.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_wifi_sme_task.h: fixed indentation coding style

Removed coding style warnings occurred on the comments.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: Staging: CSR: fixed coding style errors in csr_wifi_router_free_upstream_contents.c

Originally there were a lot of coding style errors so, I cleaned up the
coding style errors including braces and indentations.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: fix pointer(asterisk) position coding style issue in sme_userspace.h

This is a patch in the sme_userspace.h that fixes up
a pointer(asterisk) position warning found by checkpatch.pl tool

Signed-off-by: Sunhee Hwang <sunheehwang821@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: csr_framework_ext_types.h: fix coding style

Fix coding style of csr_framework_ext_types.h
    
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: CSR: csr_time.h: Removed unnecessary typedef struct

I removed the unnecessary typedef struct from the csr_time.h.
There is no actual usage of the typedef definition.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: CSR: csr_time.h: fixed indentation warnings based on coding style

I fixed the indentation warnings on csr_time.h.

Signed-off-by: Sangho Yi <antiroot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: data_tx: remove extra space in printk

This saves us 1 byte!

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: data_tx: fix up brace placement

This cleans up the brace placement coding issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>