drm/i915: nuke local versions of WARN_ON/WARN_ON_ONCE

In general, we should avoid redefining kernel macros like this. It can
get confusing, and what gets used will depend on whether the header is
included or not. Moreover, we should prefer drm_WARN_ON() and
drm_WARN_ON_ONCE() anyway, which include the stringified error condition
in the message.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121132957.3778555-1-jani.nikula@intel.com

drm/i915: Nuke dg2_ddi_pre_enable_dp()

dg2_ddi_pre_enable_dp() has outlived its usefulness so eliminate
it.

The one thing that tgl_ddi_pre_enable_dp() is missing that we
need is intel_ddi_config_transcoder_dp2(). So we'll bring that
over.

tgl_ddi_pre_enable_dp() does also have a few things that
dg2_ddi_pre_enable_dp() didn't have:
- icl_program_mg_dp_mode() -> nop due to intel_phy_is_tc()==false on DG2
- intel_ddi_power_up_lanes() -> nop due to intel_phy_is_combo()==false on DG2
- intel_ddi_mso_configure() -> only matters for MSO panels

Another slight difference is that dg2_ddi_pre_enable_dp() was
missing a bigjoiner check around intel_dsc_enable(), which
tgl_ddi_pre_enable_dp() does have.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119122150.12941-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/hdmi: Clean up TMDS clock limit exceeding user mode handling

Currently we just use all the hdmi_deep_color_possible() stuff
to compute whether deep color is possible, and leave the 8bpc
case to do its own thing. That doesn't mesh super well with 4:2:0
handling because we might end up going for 8bpc RGB without
considering that it's essentially illegal and we could instead
go for a legal 4:2:0 config.

So let's run through all the clock checks even for 8bpc first.
If we've fully exhausted all options only then do we re-run
the computation for 8bpc while ignoring the downstream TMDS
clock limits. This will guarantee that if there's a config
that respects all limits we will find it, and if there is not
we still allow the user to override the mode manually.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Clean up pre-skl primary plane registers

Use REG_BIT() & co. for the pre-skl primary plane registers.
Also give everything a consistent namespace.

v2: s/DSP/DISP/ to avoid confusion (José)
    Use DISP_WIDTH rather than DISP_POS_X for DSPSIZE (José)
    Deal with gvt

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121113036.23240-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/mst: only ack the ESI we actually handled

Seems odd that we clear all event status indicators if we've only
handled some. Only clear the ones we've handled.

v2: ack DOWN_REP and UP_REQ only if they were set in esi (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120110102.3116218-1-jani.nikula@intel.com

drm/i915/mst: ack sink irq ESI for link status changes

Only specific event status indicators caused the link status to be
acked. Be sure to ack the link status change event.

Arguably we should track which bits to actually clear in ESI instead of
the wholesale approach.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-6-jani.nikula@intel.com

drm/i915/mst: read link status only when requested by sink in ESI

The link service irq vector in DPCD 0x2005 contains the link status
changed bit to indicate the status should be checked. Only read and
check the link status when requested by the sink.

This also reduces the confusion around the buffer size for the combined
ESI and link status. Alas, we still need to take into account that all
link status helpers expect a buffer of DP_LINK_STATUS_SIZE (6) while the
link status in ESI only has 4 bytes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-5-jani.nikula@intel.com

drm/i915/mst: abstract handling of link status in DP MST

We'll want to expand on this, so abstract it to a separate function
first. Improve debug logging while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-4-jani.nikula@intel.com

drm/i915/mst: debug log 4 bytes of ESI right after reading

For whatever reason, the ESI link service irq vector was missing from
the debug output. Add the missing byte, clean up the debug message, and
do the logging right after reading the data.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-3-jani.nikula@intel.com

drm/i915/mst: abstract intel_dp_ack_sink_irq_esi()

Smaller functions make the thing easier to read. Debug log failures to
ack.

Note: Looks like we have the retry loop simply because of hysterical
raisins, dating back to the original DP MST enabling. Keep it, though I
have no idea why we have it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-2-jani.nikula@intel.com

drm/i915/mst: fix intel_dp_mst_hpd_irq() indentation

Remove extra indentation.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-1-jani.nikula@intel.com

drm/i915: split out i915_reg_read_ioctl() to i915_ioctl.[ch]

Add new files i915_ioctl.[ch] to hold small ioctls that are out of place
everywhere else, and not big enough to warrant a file of their own. For
starters, it's just for i915_reg_read_ioctl() that's a bit high level
for a low level implementation that intel_uncore.[ch] is.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120113346.3214745-1-jani.nikula@intel.com

drm/i915/dmc: Eliminate remnant GEN<n> references

Replace GEN<n> with DISPLAY_VER<n>, in line with the naming convention
followed in the i915 driver code.

Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217034141.198033-1-madhumitha.tolakanahalli.pradeep@intel.com

drm/i915: Clean up vlv/chv sprite plane registers

Use REG_BIT() & co. to polish the vlv/chv sprite plane registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/hdmi: Ignore DP++ TMDS clock limit for native HDMI ports

Lots of machines these days seem to have a crappy type1 DP dual
mode adaptor chip slapped onto the motherboard. Based on the
DP dual mode spec we currently limit those to 165MHz max TMDS
clock.

Windows OTOH ignores DP dual mode adaptors when the VBT
indicates that the port is not actually DP++, so we can
perhaps assume that the vendors did intend that the 165MHz
clock limit doesn't apply here. Though it would be much
nicer if they actually declared an explicit limit through
VBT, but that doesn't seem to be happening either.

So in order to match Windows behaviour let's ignore the
DP dual mode adaptor's TMDS clock limit for ports that
don't look like DP++ in VBT.

Unfortunately many older VBTs misdelcare their DP++ ports
as just HDMI (eg. ILK Dell Latitude E5410) or DP (eg. SNB
Lenovo ThinkPad X220). So we can't really do this universally
without risking black screens. I suppose a sensible cutoff
is HSW+ since that's when 4k became a thing and one might
assume that the machines have been tested to work with higher
TMDS clock rates.

v2: s/IS_BROADWELL/IS_HASWELL/

Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222161738.12478-1-ville.syrjala@linux.intel.com

drm/i915/bios: Nuke DEVICE_TYPE_DP_DUAL_MODE_BITS

Replace the DEVICE_TYPE_DP_DUAL_MODE_BITS stuff with just
a DP+HDMI check. The rest of the bits shouldn't really
matter anyway.

The slight change in behaviour here is that now we do look at
the DEVICE_TYPE_NOT_HDMI_OUTPUT bit (via
intel_bios_encoder_supports_hdmi()) when we previously ignored it.
The one platform we know that has problems with that bit is VLV.
But IIRC the problem was always that buggy VBTs basically never
set that bit. So that should be OK since all it would do is make
all DVI ports look like HDMI ports instead. Also can't imagine
there are many VLV machines with actual DVI ports in existence.

We still keep the rest of the dvo_port/aux_ch checks as we
can't trust that DP+HDMI device type equals DP++ due to
buggy VBTs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Throw out the !has_ddi_port_info() codepaths

Now that we parse the DDI port info from the VBT on all g4x+ platforms
we can throw out all the old codepaths in intel_bios_is_port_present(),
intel_bios_is_port_edp() and intel_bios_is_port_dp_dual_mode(). None
of these should be called on pre-g4x platforms.

For good measure throw in a WARN into intel_bios_is_port_present()
should someone get the urge to call it on older platforms. The
other two functions are specific to HDMI and DP so should not need
any protection as those encoder types don't even exist on older
platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Use i915->vbt.ports[] for all g4x+

Extend the vbt.ports[] stuff for all g4x+ platforms. We do need
to drop the version check as some elk/ctg machines may have VBTs
older than that. The oldest I know is an elk with version 142.
But the child device stuff has had the correct size since at
least version 125 (observed on my sdg), so from that angle this
should be totally safe.

This does couple of things:
- Start using the aux_ch/ddc_pin from VBT instead of just the
  hardcoded defaults. Hopefully there are no VBTs with entirely
  bogus information here.
- Start using i915->vbt.ports[] for intel_bios_is_port_dp_dual_mode().
  Should be fine as the logic doesn't actually change.
- Start using i915->vbt.ports[] for intel_bios_is_port_edp().
  The old codepath only looks at the DP DVO ports, the new codepath
  looks at both DP and HDMI DVO ports. In principle that should not
  matter. We also stop looking at some of the other device type bits
  (eg. LVDS,MIPI,ANALOG,etc.). Hopefully no VBT is broken enough that
  it sets up totally conflicting device type bits (eg. LVDS+eDP at the
  same time). We also lose the "g4x->no eDP ever" hardcoding (shouldn't
  be hard to re-introduce that into eg. sanitize_device_type() if needed).

Lightly smoke tested on a set of machines (one of ctg,ilk,snb,ivb each)
with both DP and HDMI (DP++). Everything still worked as it should.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Use i915->vbt.ports[] on CHV

CHV is currently straddling the divide by using parse_ddi_ports() stuff
for aux_ch/ddc_pin but going through all old codepaths for the rest
(intel_bios_is_port_present(), intel_bios_is_port_edp(),
intel_bios_is_port_dp_dual_mode()). Let's switch over full and use
i915->vbt.ports[] for the rest of the stuff.

dvo_port_to_port() doesn't know about DSI so we won't get into
any kind of "is port B HDMI or DSI or both?" conundrum, which
could otherwise happen on VLV/CHV due to DSI ports living in a
separate world from the other digital ports.

Including Jani's detailed analysis here for posterity:
"We stop checking for port A for CHV in intel_bios_is_port_present(), but
 it's a warn and I don't recall any bug reports, so probably fine. We
 could add a check in parse_ddi_port(), but meh.

 Ditto for intel_bios_is_port_dp_dual_mode(), except it doesn't have a
 warn.

 The eDP check in intel_bios_is_port_edp() becomes slightly more
 relaxed. Both the old and new check require these to be set:

 - DEVICE_TYPE_DISPLAYPORT_OUTPUT
 - DEVICE_TYPE_INTERNAL_CONNECTOR.

 The old code also required these to be unset:

 - DEVICE_TYPE_MIPI_OUTPUT
 - DEVICE_TYPE_COMPOSITE_OUTPUT
 - DEVICE_TYPE_DUAL_CHANNEL
 - DEVICE_TYPE_LVDS_SIGNALING
 - DEVICE_TYPE_TMDS_DVI_SIGNALING
 - DEVICE_TYPE_VIDEO_SIGNALING
 - DEVICE_TYPE_ANALOG_OUTPUT

 It's possible we've added these just as a sanity check for broken VBTs
 more than anything. I guess I'd see if actual problems arise.

 Bottom line, I think the functional changes matter only for VBTs with
 bogus data."

I agree that it should work assuming the VBT isn't totally insane.
Modern windows drivers also don't seem to check any of those
additional device type bits, which may or may not matter for older
devices (no idea what some old driver versions are checking).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Introduce has_ddi_port_info()

Pull the "do we want to use i915->vbt.ports[]?" check into
a central place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove zombie async flip vt-d w/a

This async flip vt-d w/a was moved to a different place in
commit 7d396cacaea6 ("drm/i195: Make the async flip VT-d workaround
dynamic") but the drm-intel-fixes cherry-pick commit b2d73debfdc1
("drm/i915: Extend the async flip VT-d w/a to skl/bxt") resurrected
the original code as well. So now we have this w/a in two places.
Remove the resurrected zombie code.

Not done as a revert to hopefully prevent any kind of
automagic stable backport.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208150050.17230-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpll: make intel_shared_dpll_funcs internal to intel_dpll_mgr.c

Move struct intel_shared_dpll_funcs to intel_dpll_mgr.c, as no other
place needs to have access to it. We also don't need to have kernel-doc
documentation for file internal structures, so drop them while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119110528.2377899-1-jani.nikula@intel.com

drm/i915: Nuke pointless middle men for skl+ plane programming

There is no real point in having this two stage
skl_program_plane*() vs. skl_plane_update*() wrapper stuff.
All we need to do is determine the correct color plane and
we're done.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-15-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Declutter color key register stuff

Add a few small helpers to calculate the color key register
values. Cleans up skl_program_plane_arm() a bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-14-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Extract skl_plane_aux_dist()

Extract the PLANE_AUX_DIST stuff into a small helper to
dclutter skl_program_plane_arm() a bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Clean up cursor registers

Use REG_BIT() & co. to polish the cursor plane registers.

v2: deal with gvt

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Clean up g4x+ sprite plane registers

Use REG_BIT() & co. to polish the g4x+ sprite plane registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Clean up ivb+ sprite plane registers

Use REG_BIT() & co. to polish the ivb+ sprite plane registers.

v2: deal with gvt

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Use REG_BIT() & co. for universal plane bits

Polish the skl+ universal plane register defines by
using REG_BIT() & co.

The defines are also currently spread around in some
semi-random fashion. Collect them up into one place.

v2: deal with gvt

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Sipmplify PLANE_STRIDE masking

There's no need to have separate masks for the stride bitfield
in PLANE_STRIDE for different platforms. All the extra bits
are hardcoded to zero anyway.

Also the masks we're using now don't even match the actual hardware
since the bitfield was only 10 bits on skl/derivatives, only getting
bumped to 11 bits on glk.

So let's just use a 12 bit mask for everything.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/psr: remove unused lines_to_wait vbt info

The lines_to_wait info from VBT is never used. Remove.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112112715.1234366-1-jani.nikula@intel.com

drm/i915/pxp: Hold RPM wakelock during PXP unbind

Similar to commit b8d8436840ca ("drm/i915/gt: Hold RPM wakelock during
PXP suspend") but to fix the same warning for unbind during shutdown:

------------[ cut here ]------------
RPM wakelock ref not held during HW access
WARNING: CPU: 0 PID: 4139 at drivers/gpu/drm/i915/intel_runtime_pm.h:115
gen12_fwtable_write32+0x1b7/0
Modules linked in: 8021q ccm rfcomm cmac algif_hash algif_skcipher
af_alg uinput snd_hda_codec_hdmi vf industrialio iwl7000_mac80211
cros_ec_sensorhub lzo_rle lzo_compress zram iwlwifi cfg80211 joydev
CPU: 0 PID: 4139 Comm: halt Tainted: G     U  W
5.10.84 #13 344e11e079c4a03940d949e537eab645f6
RIP: 0010:gen12_fwtable_write32+0x1b7/0x200
Code: 48 c7 c7 fc b3 b5 89 31 c0 e8 2c f3 ad ff 0f 0b e9 04 ff ff ff c6
05 71 e9 1d 01 01 48 c7 c7 d67
RSP: 0018:ffffa09ec0bb3bb0 EFLAGS: 00010246
RAX: 12dde97bbd260300 RBX: 00000000000320f0 RCX: ffffffff89e60ea0
RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffffffff89e60e70
RBP: ffffa09ec0bb3bd8 R08: 0000000000000000 R09: ffffa09ec0bb3950
R10: 00000000ffffdfff R11: ffffffff89e91160 R12: 0000000000000000
R13: 0000000028121969 R14: ffff9515c32f0990 R15: 0000000040000000
FS:  0000790dcf225740(0000) GS:ffff951737800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000058b25efae147 CR3: 0000000133ea6001 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 intel_pxp_fini_hw+0x2f/0x39
 i915_pxp_tee_component_unbind+0x1c/0x42
 component_unbind+0x32/0x48
 component_unbind_all+0x80/0x9d
 take_down_master+0x24/0x36
 component_master_del+0x56/0x70
 mei_pxp_remove+0x2c/0x68
 mei_cl_device_remove+0x35/0x68
 device_release_driver_internal+0x100/0x1a1
 mei_cl_bus_remove_device+0x21/0x79
 mei_cl_bus_remove_devices+0x3b/0x51
 mei_stop+0x3b/0xae
 mei_me_shutdown+0x23/0x58
 device_shutdown+0x144/0x1d3
 kernel_power_off+0x13/0x4c
 __se_sys_reboot+0x1d4/0x1e9
 do_syscall_64+0x43/0x55
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x790dcf316273
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00
00 89 fa be 69 19 12 28 bf ad8
RSP: 002b:00007ffca0df9198 EFLAGS: 00000202 ORIG_RAX: 00000000000000a9
RAX: ffffffffffffffda RBX: 000000004321fedc RCX: 0000790dcf316273
RDX: 000000004321fedc RSI: 0000000028121969 RDI: 00000000fee1dead
RBP: 00007ffca0df9200 R08: 0000000000000007 R09: 0000563ce8cd8970
R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffca0df9308
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003
---[ end trace 2f501b01b348f114 ]---
ACPI: Preparing to enter system sleep state S5
reboot: Power down

Changes since v1:
 - Rebase to latest drm-tip

Fixes: 0cfab4cb3c4e ("drm/i915/pxp: Enable PXP power management")
Suggested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106200236.489656-2-juston.li@intel.com

drm/i915/display/adlp: Implement new step in the TC voltage swing prog sequence

TC voltage swing programming sequence was updated with a new step.

BSpec: 54956
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113174826.50272-1-jose.souza@intel.com

drm/i915/display/ehl: Update voltage swing table

EHL table was recently updated with some minor fixes.

BSpec: 21257
Cc: stable@vger.kernel.org
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113160437.49059-1-jose.souza@intel.com

drm/i915/pcode: rename sandybridge_pcode_* to snb_pcode_*

Prefer acronym-based naming to be in line with the rest of the driver.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112111740.1208374-1-jani.nikula@intel.com

drm/i915/dp: make intel_dp_pack_aux() static again

The last user of intel_dp_pack_aux() outside intel_dp_aux.c got removed
in commit ad26451a7902 ("drm/i915/display: Drop PSR support from HSW and
BDW"). Make the function static again.

Rename the pack/unpack functions to follow the usual naming conventions
while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112105703.1151391-1-jani.nikula@intel.com

Merge tag 'gvt-next-2022-01-12' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-2022-01-12

- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f3076d7e-ff71-4882-8d72-fcc577a882cb@intel.com

drm/i915/gvt: Constify vgpu_types

It is never modified, so make it const to allow the compiler to put it
in read-only memory. While at it, make name a const char*.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-10-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify gtt_type_table_entry

It is never modified, so make it const to allow the compiler to put it
in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-9-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify formats

These are never modified, so make them const to allow the compiler to
put them in read-only memory. WHile at it, make the description const
char* since it is never modified.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-8-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify cmd_interrupt_events

It is never modified, so make it const to allow the compiler to put it
in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-7-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify gvt_mmio_block

These are never modified, so make them const to allow the compiler to
put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-6-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_sched_policy_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-5-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_irq_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-4-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_gtt_pte_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-3-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_gtt_gma_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-2-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Fix cmd parser error for Passmark9

This is to add one new register required for windows guest driver
update when running Passmark9, otherwise cmd parser would complain
and fail guest workload.

Cc: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211011043329.3519093-1-zhenyuw@linux.intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Use list_entry to access list members

Use list_entry() instead of container_of() to access list members.
Also drop unnecessary and misleading NULL checks on the result of
list_entry().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210523172304.3033229-1-linux@roeck-us.net
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915: Drop unused _PORT3 and _PORT4 TC phy register offsets

All MG/DKL PHY register regions are evenly spaced offset-wise (0x168000,
0x169000, 0x16A000, 0x16B000) so the _MMIO_PORT() macro we use to access
their registers only needs the first two offsets.  We can drop the
_PORT3 and _PORT4 offsets which are never directly referenced.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-12-matthew.d.roper@intel.com

drm/i915: Move TC PHY registers to their own header

Registers representing the MG/DKL TC PHYs (including the TC DPLLs which
exist inside the PHY) are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-11-matthew.d.roper@intel.com

drm/i915: Move combo PHY registers to their own header

These registers are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-10-matthew.d.roper@intel.com

drm/i915: Move SNPS PHY registers to their own header

These registers are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

v2:
 - Don't forget to include i915_reg_defs.h (Jani)
 - Ensure include guard matches header name (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-9-matthew.d.roper@intel.com

drm/i915/gt: Move engine registers to their own header

Let's continue breaking up and cleaning up the massive i915_reg.h file
by moving all registers that are defined in relation to an engine base
to their own header.

There are probably a bunch of other "engine registers" that we haven't
moved yet (especially those that belong to the render engine in the
0x2??? range), but this is a relatively straightforward first step.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-8-matthew.d.roper@intel.com

drm/i915: Introduce i915_reg_defs.h

We'd like to start splitting i915_reg.h into various domain-specific
register files and cleaning them up.  Let's move the basic macros and
type definitions to their own header file that can be including in each
of the new split headers.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-7-matthew.d.roper@intel.com

drm/i915: Replace GFX_MODE_GEN7 with RING_MODE_GEN7

It's preferable to use parameterized register macros where possible.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-6-matthew.d.roper@intel.com

drm/i915: Use RING_PSMI_CTL rather than per-engine macros

We have a parameterized macro for RING_PSMI_CTL; let's use that instead
of the per-engine definitions where possible.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-5-matthew.d.roper@intel.com

drm/i915: Parameterize ECOSKPD

Combine the separate render and blitter register definitions into a
single definition.  We already know we have some workarounds on an
upcoming platform that will need to update the ECOSKPD register for
other engines too, so this helps pave the way for that.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-4-matthew.d.roper@intel.com

drm/i915: Parameterize PWRCTX_MAXCNT

Rather than having separate definitions for each engine, create a single
parameterized macro that takes the engine base offset.  This will also
ensure we get to the proper offset if we ever need to use these
registers on newer platforms (where the media engine offsets have
changed).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-3-matthew.d.roper@intel.com

drm/i915: Use parameterized GPR register definitions everywhere

Since we have an engine-parameterized macro GEN8_RING_CS_GPR, let's use
that in place of the HSW_CS_GPR and BCS_GPR register definitions.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-2-matthew.d.roper@intel.com

drm/i915/snps: vswing value refined for SNPS phys

Updated new values from BSPEC.

Bspec: 53920
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110234520.6836-1-clinton.a.taylor@intel.com

drm/i915: split out vlv sideband registers from i915_reg.h

Add a dedicated file vlv_sideband_reg.h for the VLV/CHV sideband
registers. The sideband registers macros are needed by the same files
that need vlv_sideband.h, so include the definitions from there.

v2: Fix copyright year (Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095740.166078-2-jani.nikula@intel.com

drm/i915: split out PCI config space registers from i915_reg.h

The PCI config space registers don't really belong next to the MMIO
register definitions.

v2: Fix copyright year (Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095740.166078-1-jani.nikula@intel.com

drm/i915: split out gem/i915_gem_tiling.h from i915_drv.h

We already have the gem/i915_gem_tiling.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8073a429ed1f8ade9c0cc8a6ed1a0f82183100c5.1641561552.git.jani.nikula@intel.com

drm/i915: split out gem/i915_gem_userptr.h from i915_drv.h

We already have the gem/i915_gem_userptr.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c29f66604ebd973b8eff1cce7d7c53615a26480f.1641561552.git.jani.nikula@intel.com

drm/i915: split out i915_gem_evict.h from i915_drv.h

We already have the i915_gem_evict.c file.

v2: Fixed commit message (Tvrtko)

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec666853171d04daeb21a93083940df36907c343.1641561552.git.jani.nikula@intel.com

drm/i915: split out i915_cmd_parser.h from i915_drv.h

We already have the i915_cmd_parser.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a02b8788266f4f2fd4de12808b55c4a66179e98.1641561552.git.jani.nikula@intel.com

drm/i915: split out i915_getparam.h from i915_drv.h

We already have the i915_getparam.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/27f3af2298c3cdd3cb2839c2a9a52237248e087a.1641561552.git.jani.nikula@intel.com

drm/i915: Fix possible NULL pointer dereferences in i9xx_update_wm()

Check return pointer from intel_crtc_for_plane() before dereferencing
it, as it can be NULL.

v2: Moved the NULL check into intel_crtc_active().

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217160255.1300348-1-harish.chegondi@intel.com

drm/i915: stop including i915_irq.h from i915_drv.h

Only include i915_irq.h where actually needed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105102131.988791-1-jani.nikula@intel.com

drm: Add orientation quirk for GPD Win Max

Panel is 800x1280, but mounted on a laptop form factor, sideways.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-3-anisse@astier.eu

drm/i915/opregion: add support for mailbox #5 EDID

The ACPI OpRegion Mailbox #5 ASLE extension may contain an EDID to be
used for the embedded display. Add support for using it via by adding
the EDID to the list of available modes on the connector, and use it for
eDP when available.

If a panel's EDID is broken, there may be an override EDID set in the
ACPI OpRegion mailbox #5. Use it if available.

Fixes the GPD Win Max display.

Based on original patch series by: Jani Nikula <jani.nikula@intel.com>
https://patchwork.kernel.org/project/intel-gfx/patch/20200828061941.17051-1-jani.nikula@intel.com/

Changes:
 - EDID is copied and validated with drm_edid_is_valid
 - EDID is now only used as a fallback.
 - squashed the two patches

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-2-anisse@astier.eu

drm/i915/dsi: Drop double check ACPI companion device for NULL

acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222154033.6770-1-andriy.shevchenko@linux.intel.com

drm/i915/fbc: Remember to update FBC state even when not reallocating CFB

We mustn't forget to update our FBC state even if we don't have
to reallocate the CFB. Otherwise we won't refresh our notion
of what eg. the new fence or the new override CFB stride
should be. Using the wrong CFB stride in particular can cause
underruns and could even corrupt other stuff in stolen.

Fixes: f4cfdbb02ca8 ("drm/i915/fbc: Nuke state_cache")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4774
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216110822.8461-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/bios: fix slab-out-of-bounds access

If VBT size is not a multiple of 4, the last 4-byte store will be out of
bounds of the allocated buffer. Spotted with KASAN. Round up the
allocation size.

v2: Use round_up() intead of roundup() as it's a power of 2 (Thomas)

Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a36e7dc0af1c ("drm/i915/dg1: Read OPROM via SPI controller")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222081654.1843211-1-jani.nikula@intel.com

drm: Always include the debugfs dentry in drm_crtc

Remove the counterproductive CONFIG_DEBUG_FS ifdef and just include
the debugfs dentry in drm_crtc always. This way we don't need
annoying ifdefs in the actual code with DEBUGFS=n. Also we don't
have these ifdefs around any of the other debugfs dentries either
so can't see why drm_crtc should be special.

This fixes the i915 DEBUGFS=n build because I assumed the dentry
would always be there.

Cc: Jani Nikula <jani.nikula@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e74c6aa955ca ("drm/i915/fbc: Register per-crtc debugfs files")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221193754.12287-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm/i915/adl-n: Enable ADL-N platform

Adding PCI device ids and enabling ADL-N platform.
ADL-N from i915 point of view is subplatform of ADL-P.

BSpec: 68397

Changes since V2:
- Added version log history
Changes since V1:
- replace IS_ALDERLAKE_N with IS_ADLP_N - Jani Nikula

Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210051802.4063958-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915/dg1: Read OPROM via SPI controller

Read OPROM SPI through MMIO and find VBT entry since we can't use
OpRegion and PCI mapping may not work on some systems due to most BIOSes
not leaving the Option ROM mapped.

v2: Remove message with allocation failure

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216062645.3477854-1-lucas.demarchi@intel.com

drm/i915: Remove unused intel_gmbus_set_speed() function

The intel_gmbus_set_speed() function is not used anywhere, remove it.

Note drivers/gpu/drm/gma500 has its own copy called
gma_intel_gmbus_set_speed() which is used, the intel_gmbus_set_speed()
version in the i915 code is not used at all

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121191001.252076-1-hdegoede@redhat.com

drm/i915/backlight: Make ext_pwm_disable_backlight() call intel_backlight_set_pwm_level()

At least the Bay Trail LPSS PWM controller used with DSI panels on many
Bay Trail tablets seems to leave the PWM pin in whatever state it was
(high or low) ATM that the PWM gets disabled. Combined with some panels
not having a separate backlight-enable pin this leads to the backlight
sometimes staying on while it should not (when the pin was high during
PWM-disabling).

First calling intel_backlight_set_pwm_level() will ensure that the pin
is always low (or high for inverted brightness panels) since the passed
in duty-cycle is 0% (or 100%) when the PWM gets disabled fixing the
backlight sometimes staying on.

With the exception of ext_pwm_disable_backlight() all other
foo_disable_backlight() functions call intel_backlight_set_pwm_level()
already before disabling the backlight, so this change also aligns
ext_pwm_disable_backlight() with all the other disable() functions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121110032.4720-2-hdegoede@redhat.com

drm/i915/fbc: Register per-crtc debugfs files

Expose FBC debugfs files for each crtc. These may or may not point
to the same FBC instance depending on the platform.

We leave the old global debugfs files in place until
igt catches up to the new per-crtc approach.

v2: Take a trip via intel_crtc_debugfs_add() (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213151435.9700-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: Introduce device info fbc_mask

Declare which FBC instances are present via a fbc_mask
in device info. For the moment there is just the one.

TODO: Need to figure out how to expose multiple FBC
instances in debugs. Just different file names, or move
the files under some subdirectory (per-crtc maybe), or
something else? This will need igt changes as well.

v2: Put the mask into device_info.display (Jani)
    Put the magic pipe->fbc thing into skl_fbc_id_for_pipe() (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-4-ville.syrjala@linux.intel.com

drm/i915/fbc: Loop through FBC instances in various places

Convert i915->fbc into an array in preparation for
multiple FBC instances, and loop through all instances
in all places where the caller does not know which
instance(s) (if any) are relevant. This is the case
for eg. frontbuffer tracking and FIFO underrun hadling.

v2: More intel_ namespace (Jani)
    Leave out debugfs for later

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-3-ville.syrjala@linux.intel.com

drm/i915/fbc: Parametrize FBC register offsets

Parametrize ilk+ FBC register offsets based on the FBC instance.

v2: More intel_ namespace (Jani)
v3: Don't break gvt (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214184616.1410-1-ville.syrjala@linux.intel.com

drm/i915/cdclk: move struct intel_cdclk_funcs to intel_cdclk.c

The funcs struct can be opaque, make it internal to intel_cdclk.c.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-2-jani.nikula@intel.com

drm/i915/cdclk: turn around i915_drv.h and intel_cdclk.h dependency

intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.

The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.

v2: Expand on the commit message wrt cdclk state macros

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com

drm/i915: Fix implicit use of struct pci_dev

intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:

In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
                 from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
                 from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
      |                                       ^~~~~~~
cc1: all warnings being treated as errors

Add a declaration of the struct to fix this.

Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53db1 ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org

drm/i915: Move pipe/transcoder/abox masks under intel_device_info.display

Collect the dipslay related mask under the display sub-structure
in intel_device_info.

Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.

There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/cdclk: hide struct intel_cdclk_vals

The definition is not needed outside of intel_cdclk.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7e7e7fb91eae2b49a0ab5d982a235cec34e3320.1639068649.git.jani.nikula@intel.com

drm/i915/cdclk: move intel_atomic_check_cdclk() to intel_cdclk.c

Rename to intel_cdclk_atomic_check() and make
intel_cdclk_bw_calc_min_cdclk() static.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/43ad4d437121f43d76c790ac5d4d131743d58988.1639068649.git.jani.nikula@intel.com

drm/i915/pxp: remove useless includes

Not needed.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/01c4ea0cea17eead027c83dc9eaca3c181ce3a24.1639142167.git.jani.nikula@intel.com

drm/i915/pxp: un-inline intel_pxp_is_enabled()

In the interest of reducing include dependencies, un-inline
intel_pxp_is_enabled().

v2: Fix build for CONFIG_DRM_I915_PXP=n

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36bbb3708f3b1f84f0718afff94212dde93cb479.1639142167.git.jani.nikula@intel.com

drm/i915/fb: reduce include dependencies

We actually need i915_active_types.h, not i915_active.h.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aed5f1afda4448ec46c7ff1f95291edebf355790.1639142167.git.jani.nikula@intel.com

drm/i915/fbc: avoid intel_frontbuffer.h include with declaration

Reduce include dependencies using forward declarations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb54050e03f830a1b29eb14cb37466f39c499cc2.1639142167.git.jani.nikula@intel.com

drm/i915/psr: avoid intel_frontbuffer.h include with declaration

Reduce include dependencies using forward declarations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee35f2f01f731c21f24a238f2d1690b09ac2da1f.1639142167.git.jani.nikula@intel.com

drm/i915/active: remove useless i915_utils.h include

Not needed.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/52b1cf56c16bf669a1357ce81d9232c5480914a4.1639142167.git.jani.nikula@intel.com

drm/i915/reset: include intel_display.h instead of intel_display_types.h

Use the more specific include that's needed.

v2: Include intel_display.h (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1e195b8ca1252d1e149c8185d107a5517496973.1639142167.git.jani.nikula@intel.com

drm/i915/display: Fix an unsigned subtraction which can never be negative.

smatch warning:
drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn:
unsigned 'fw->size - offset' is never less than zero

Firmware size is size_t and offset is u32. So the subtraction is
unsigned which can never be less than zero.

Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com

drm/i915: Add privacy-screen support (v3)

Add support for eDP panels with a built-in privacy screen using the
new drm_privacy_screen class.

Changes in v3:
- Move drm_privacy_screen_get() call to intel_ddi_init_dp_connector()

Changes in v2:
- Call drm_connector_update_privacy_screen() from
  intel_enable_ddi_dp() / intel_ddi_update_pipe_dp() instead of adding a
  for_each_new_connector_in_state() loop to intel_atomic_commit_tail()
- Move the probe-deferral check to the intel_modeset_probe_defer() helper

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-11-hdegoede@redhat.com

drm/i915: Add intel_modeset_probe_defer() helper

The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.

Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com

drm/i915: s/intel_get_first_crtc/intel_first_crtc/

Since we got rid of the "_get_" from intel_get_crtc_for_pipe()
let's do the same for intel_get_first_crtc() for consistency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>