padata: Always leave BHs disabled when running ->parallel()

[ Upstream commit 34c3a47d20ae55b3600fed733bf96eafe9c500d5 ]

A deadlock can happen when an overloaded system runs ->parallel() in the
context of the current task:

    padata_do_parallel
      ->parallel()
        pcrypt_aead_enc/dec
          padata_do_serial
            spin_lock(&reorder->lock) // BHs still enabled
              <interrupt>
                ...
                  __do_softirq
                    ...
                      padata_do_serial
                        spin_lock(&reorder->lock)

It's a bug for BHs to be on in _do_serial as Steffen points out, so
ensure they're off in the "current task" case like they are in
padata_parallel_worker to avoid this situation.

Reported-by: syzbot+bc05445bc14148d51915@syzkaller.appspotmail.com
Fixes: 4611ce224688 ("padata: allocate work structures for parallel jobs from a pool")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: tcrypt - Fix multibuffer skcipher speed test mem leak

[ Upstream commit 1aa33fc8d4032227253ceb736f47c52b859d9683 ]

In the past, the data for mb-skcipher test has been allocated
twice, that means the first allcated memory area is without
free, which may cause a potential memory leakage. So this
patch is to remove one allocation to fix this error.

Fixes: e161c5930c15 ("crypto: tcrypt - add multibuf skcipher...")
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hpsa: Fix possible memory leak in hpsa_init_one()

[ Upstream commit 9c9ff300e0de07475796495d86f449340d454a0c ]

The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.

Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.

Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: visconti-pcie: Fix interrupts array max constraints

[ Upstream commit 4cf4b9b70ab2785461190c08a3542d2d74c28b46 ]

In accordance with the way the device DT-node is actually defined in
arch/arm64/boot/dts/toshiba/tmpv7708.dtsi and the way the device is probed
by the DW PCIe driver there are two IRQs it actually has. It's MSI IRQ the
DT-bindings lack. Let's extend the interrupts property constraints then
and fix the schema example so one would be acceptable by the actual device
DT-bindings.

Link: https://lore.kernel.org/r/20221113191301.5526-3-Sergey.Semin@baikalelectronics.ru
Fixes: 17c1b16340f0 ("dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq

[ Upstream commit b8a83e600bdde93e7da41ea3204b2b3832a3c99b ]

Originally as it was defined the legacy bindings the pcie_inbound_axi and
pcie_aux clock names were supposed to be used in the fsl,imx6sx-pcie and
fsl,imx8mq-pcie devices respectively. But the bindings conversion has been
incorrectly so now the fourth clock name is defined as "pcie_inbound_axi
for imx6sx-pcie, pcie_aux for imx8mq-pcie", which is completely wrong.
Let's fix that by conditionally apply the clock-names constraints based on
the compatible string content.

Link: https://lore.kernel.org/r/20221113191301.5526-2-Sergey.Semin@baikalelectronics.ru
Fixes: 751ca492f131 ("dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed

[ Upstream commit f67376d801499f4fa0838c18c1efcad8840e550d ]

There is a null-ptr-deref when mount.cifs over rdma:

  BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
  Read of size 8 at addr 0000000000000018 by task mount.cifs/3046

  CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   kasan_report+0xad/0x130
   rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
   execute_in_process_context+0x25/0x90
   __rxe_cleanup+0x101/0x1d0 [rdma_rxe]
   rxe_create_qp+0x16a/0x180 [rdma_rxe]
   create_qp.part.0+0x27d/0x340
   ib_create_qp_kernel+0x73/0x160
   rdma_create_qp+0x100/0x230
   _smbd_get_connection+0x752/0x20f0
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

The root cause of the issue is the socket create failed in
rxe_qp_init_req().

So move the reset rxe_qp_do_cleanup() after the NULL ptr check.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20221122151437.1057671-1-zhangxiaoxu5@huawei.com
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: fix memory leak in hns_roce_alloc_mr()

[ Upstream commit a115aa00b18f7b8982b8f458149632caf64a862a ]

When hns_roce_mr_enable() failed in hns_roce_alloc_mr(), mr_key is not
released. Compiled test only.

Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221119070834.48502-1-shaozhengchao@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - Make cc_debugfs_global_fini() available for module init function

[ Upstream commit 8e96729fc26c8967db45a3fb7a60387619f77a22 ]

ccree_init() calls cc_debugfs_global_fini(), the former is an init
function and the latter an exit function though.

A modular build emits:

WARNING: modpost: drivers/crypto/ccree/ccree.o: section mismatch in reference: init_module (section: .init.text) -> cc_debugfs_global_fini (section: .exit.text)

(with CONFIG_DEBUG_SECTION_MISMATCH=y).

Fixes: 4f1c596df706 ("crypto: ccree - Remove debugfs when platform_driver_register failed")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi: Decrease PCI device reference count in error path

[ Upstream commit 9b51d072da1d27e1193e84708201c48e385ad912 ]

pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.

If we break out the loop in node_affinity_init() with 'dev' not NULL, we
need to call pci_dev_put() to decrease the reference count. Add missing
pci_dev_put() in error path.

Fixes: c513de490f80 ("IB/hfi1: Invalid NUMA node information can cause a divide by zero")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221117131546.113280-1-wangxiongfeng2@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Check for alloc failure in pci_request_irq()

[ Upstream commit 2d9cd957d40c3ac491b358e7cff0515bb07a3a9c ]

When kvasprintf() fails to allocate memory, it returns a NULL pointer.
Return error from pci_request_irq() so we don't dereference it.

[bhelgaas: commit log]
Fixes: 704e8953d3e9 ("PCI/irq: Add pci_request_irq() and pci_free_irq() helpers")
Link: https://lore.kernel.org/r/20221121020029.3759444-1-zengheng4@huawei.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix ext_sge num error when post send

[ Upstream commit 8eaa6f7d569b4a22bfc1b0a3fdfeeb401feb65a4 ]

In the HNS ROCE driver, The sge is divided into standard sge and extended
sge.  There are 2 standard sge in RC/XRC, and the UD standard sge is 0.
In the scenario of RC SQ inline, if the data does not exceed 32bytes, the
standard sge will be used. If it exceeds, only the extended sge will be
used to fill the data.

Currently, when filling the extended sge, max_gs is directly used as the
number of the extended sge, which did not subtract the number of standard
sge.  There is a logical error. The new algorithm subtracts the number of
standard sge from max_gs to get the actual number of extended sge.

Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-2-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()

[ Upstream commit 3b1f864c904915b3baebffb31ea05ee704b0df3c ]

The sge size is known to be constant, so it's unnecessary to use sizeof to
calculate.

Link: https://lore.kernel.org/r/20220922123315.3732205-11-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 8eaa6f7d569b ("RDMA/hns: Fix ext_sge num error when post send")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()

[ Upstream commit cc7710d0d4ebc6998f04035cde4f32c5ddbe9d7f ]

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before q_num_set() returns.

Fixes: c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: cryptd - Use request context instead of stack for sub-request

[ Upstream commit 3a58c231172537f7b0e19d93ed33decd04f80eab ]

cryptd is buggy as it tries to use sync_skcipher without going
through the proper sync_skcipher interface.  In fact it doesn't
even need sync_skcipher since it's already a proper skcipher and
can easily access the request context instead of using something
off the stack.

Fixes: 36b3875a97b8 ("crypto: cryptd - Remove VLA usage of skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - Remove debugfs when platform_driver_register failed

[ Upstream commit 4f1c596df706c9aca662b6c214fad84047ae2a97 ]

When platform_driver_register failed, we need to remove debugfs,
which will caused a resource leak, fix it.

Failed logs as follows:
[   32.606488] debugfs: Directory 'ccree' with parent '/' already present!

Fixes: 4c3f97276e15 ("crypto: ccree - introduce CryptoCell driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix a warning in resp_write_scat()

[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ]

As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.

Call trace:

sg_ioctl
 sg_ioctl_common
   scsi_ioctl
    sg_scsi_ioctl
     blk_execute_rq
      blk_mq_sched_insert_request
       blk_mq_run_hw_queue
        __blk_mq_delay_run_hw_queue
         __blk_mq_run_hw_queue
          blk_mq_sched_dispatch_requests
           __blk_mq_sched_dispatch_requests
            blk_mq_dispatch_rq_list
             scsi_queue_rq
              scsi_dispatch_cmd
               scsi_debug_queuecommand
                schedule_resp
                 resp_write_scat

If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail.  It creates a stack trace and messes up dmesg.  The
user controls the size here so if they specify a too large size it will
fail.

Add __GFP_NOWARN in order to avoid too large allocation warning.  This is
detected by static analysis using smatch.

Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Set defined status for work completion with undefined status

[ Upstream commit 60da2d11fcbc043304910e4d2ca82f9bab953e63 ]

A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.

This bug leads to the following Smatch static checker warning:

drivers/infiniband/sw/siw/siw_cq.c:96 siw_reap_cqe()
error: buffer overflow 'map_cqe_status' 10 <= 21

Fixes: bdf1da5df9da ("RDMA/siw: Fix immediate work request flush to completion queue")
Link: https://lore.kernel.org/r/20221115170747.1263298-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port

[ Upstream commit ecacb3751f254572af0009b9501e2cdc83a30b6a ]

When filling a cm_id entry, return "-EAGAIN" instead of 0 if the cm_id
doesn'the have the same port as requested, otherwise an incomplete entry
may be returned, which causes "rdam res show cm_id" to return an error.

For example on a machine with two rdma devices with "rping -C 1 -v -s"
running background, the "rdma" command fails:
  $ rdma -V
  rdma utility, iproute2-5.19.0
  $ rdma res show cm_id
  link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 28056 comm rping src-addr 0.0.0.0:7174
  error: Protocol not available

While with this fix it succeeds:
  $ rdma res show cm_id
  link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
  link mlx5_1/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174

Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/a08e898cdac5e28428eb749a99d9d981571b8ea7.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Make sure "ib_port" is valid when access sysfs node

[ Upstream commit 5e15ff29b156bbbdeadae230c8ecd5ecd8ca2477 ]

The "ib_port" structure must be set before adding the sysfs kobject,
and reset after removing it, otherwise it may crash when accessing
the sysfs node:
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
  Mem abort info:
    ESR = 0x96000006
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000006
    CM = 0, WnR = 0
  user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e85f5ba5
  [0000000000000050] pgd=0000000848fd9003, pud=000000085b387003, pmd=0000000000000000
  Internal error: Oops: 96000006 [#2] PREEMPT SMP
  Modules linked in: ib_umad(O) mlx5_ib(O) nfnetlink_cttimeout(E) nfnetlink(E) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_nat_ipv6(E) nf_nat_ipv4(E) nf_conncount(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) mst_pciconf(O) ipmi_devintf(E) ipmi_msghandler(E) ipmb_dev_int(OE) mlx5_core(O) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) ib_core(O) mlx_compat(O) psample(E) sbsa_gwdt(E) uio_pdrv_genirq(E) uio(E) mlxbf_pmc(OE) mlxbf_gige(OE) mlxbf_tmfifo(OE) gpio_mlxbf2(OE) pwr_mlxbf(OE) mlx_trio(OE) i2c_mlxbf(OE) mlx_bootctl(OE) bluefield_edac(OE) knem(O) ip_tables(E) ipv6(E) crc_ccitt(E) [last unloaded: mst_pci]
  Process grep (pid: 3372, stack limit = 0x0000000022055c92)
  CPU: 5 PID: 3372 Comm: grep Tainted: G      D    OE     4.19.161-mlnx.47.gadcd9e3 #1
  Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.9.2-15-ga2403ab Sep  8 2022
  pstate: 40000005 (nZcv daif -PAN -UAO)
  pc : hw_stat_port_show+0x4c/0x80 [ib_core]
  lr : port_attr_show+0x40/0x58 [ib_core]
  sp : ffff000029f43b50
  x29: ffff000029f43b50 x28: 0000000019375000
  x27: ffff8007b821a540 x26: ffff000029f43e30
  x25: 0000000000008000 x24: ffff000000eaa958
  x23: 0000000000001000 x22: ffff8007a4ce3000
  x21: ffff8007baff8000 x20: ffff8007b9066ac0
  x19: ffff8007bae97578 x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: 0000000000000000
  x13: 0000000000000000 x12: 0000000000000000
  x11: 0000000000000000 x10: 0000000000000000
  x9 : 0000000000000000 x8 : ffff8007a4ce4000
  x7 : 0000000000000000 x6 : 000000000000003f
  x5 : ffff000000e6a280 x4 : ffff8007a4ce3000
  x3 : 0000000000000000 x2 : aaaaaaaaaaaaaaab
  x1 : ffff8007b9066a10 x0 : ffff8007baff8000
  Call trace:
   hw_stat_port_show+0x4c/0x80 [ib_core]
   port_attr_show+0x40/0x58 [ib_core]
   sysfs_kf_seq_show+0x8c/0x150
   kernfs_seq_show+0x44/0x50
   seq_read+0x1b4/0x45c
   kernfs_fop_read+0x148/0x1d8
   __vfs_read+0x58/0x180
   vfs_read+0x94/0x154
   ksys_read+0x68/0xd8
   __arm64_sys_read+0x28/0x34
   el0_svc_common+0x88/0x18c
   el0_svc_handler+0x78/0x94
   el0_svc+0x8/0xe8
  Code: f2955562 aa1603e4 aa1503e0 f9405683 (f9402861)

Fixes: d8a5883814b9 ("RDMA/core: Replace the ib_port_data hw_stats pointers with a ib_port pointer")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/88867e705c42c1cd2011e45201c25eecdb9fef94.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/restrack: Release MR restrack when delete

[ Upstream commit dac153f2802db1ad46207283cb9b2aae3d707a45 ]

The MR restrack also needs to be released when delete it, otherwise it
cause memory leak as the task struct won't be released.

Fixes: 13ef5539def7 ("RDMA/restrack: Count references to the verbs objects")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/703db18e8d4ef628691fb93980a709be673e62e3.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Disable MSI remapping after suspend

[ Upstream commit d899aa668498c07ff217b666ae9712990306e682 ]

MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.

Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com
Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mad: Don't call to function that might sleep while in atomic context

[ Upstream commit 5c20311d76cbaeb7ed2ecf9c8b8322f8fc4a7ae3 ]

Tracepoints are not allowed to sleep, as such the following splat is
generated due to call to ib_query_pkey() in atomic context.

WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220
CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-305.3.1.el8.x86_64 #1
 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+a55c8938 04/01/2014
 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
 RIP: 0010:rb_commit+0xc1/0x220
 RSP: 0000:ffffa8ac80f9bca0 EFLAGS: 00010202
 RAX: ffff8951c7c01300 RBX: ffff8951c7c14a00 RCX: 0000000000000246
 RDX: ffff8951c707c000 RSI: ffff8951c707c57c RDI: ffff8951c7c14a00
 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff8951c7c01300 R11: 0000000000000001 R12: 0000000000000246
 R13: 0000000000000000 R14: ffffffff964c70c0 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff8951fbc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f20e8f39010 CR3: 000000002ca10005 CR4: 0000000000170ef0
 Call Trace:
  ring_buffer_unlock_commit+0x1d/0xa0
  trace_buffer_unlock_commit_regs+0x3b/0x1b0
  trace_event_buffer_commit+0x67/0x1d0
  trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core]
  ib_mad_recv_done+0x48b/0xc10 [ib_core]
  ? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core]
  __ib_process_cq+0x91/0x1c0 [ib_core]
  ib_cq_poll_work+0x26/0x80 [ib_core]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 78ba8509d3830a16 ]---

Fixes: 821bf1de45a1 ("IB/MAD: Add recv path trace point")
Signed-off-by: Leonid Ravich <lravich@gmail.com>
Link: https://lore.kernel.org/r/Y2t5feomyznrVj7V@leonid-Inspiron-3421
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix immediate work request flush to completion queue

[ Upstream commit bdf1da5df9da680589a7f74448dd0a94dd3e1446 ]

Correctly set send queue element opcode during immediate work request
flushing in post sendqueue operation, if the QP is in ERROR state.
An undefined ocode value results in out-of-bounds access to an array
for mapping the opcode between siw internal and RDMA core representation
in work completion generation. It resulted in a KASAN BUG report
of type 'global-out-of-bounds' during NFSoRDMA testing.

This patch further fixes a potential case of a malicious user which may
write undefined values for completion queue elements status or opcode,
if the CQ is memory mapped to user land. It avoids the same out-of-bounds
access to arrays for status and opcode mapping as described above.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20221107145057.895747-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix set-but-not-used variable warnings

[ Upstream commit 4fb2169d66b837a2986f569f5d5b81f79e6e4a4c ]

Fix the following two compiler warnings:

drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
  171 |         uint8_t bail;
      |                 ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
 2023 |         uint8_t bail;
      |                 ^~~~

Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Report the correct link speed

[ Upstream commit 4eace75e0853273755b878ffa9cce6de84df975a ]

The active link speed is currently hard-coded in irdma_query_port due
to which the port rate in ibstatus does reflect the active link speed.

Call ib_get_eth_speed in irdma_query_port to get the active link speed.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221104234957.1135-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()

[ Upstream commit 7b02b2201893a71b881026cf574902019ab00db5 ]

In error path of f2fs_fill_super(), this patch fixes to call
f2fs_destroy_post_read_wq() once if we fail in f2fs_start_ckpt_thread().

Fixes: 261eeb9c1585 ("f2fs: introduce checkpoint_merge mount option")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix normal discard process

[ Upstream commit b5f1a218ae5e4339130d6e733f0e63d623e09a2c ]

In the DPOLICY_BG mode, there is a conflict between
the two conditions "i + 1 < dpolicy->granularity" and
"i < DEFAULT_DISCARD_GRANULARITY". If i = 15, the first
condition is false, it will enter the second condition
and dispatch all small granularity discards in function
 __issue_discard_cmd_orderly. The restrictive effect
of the first condition to small discards will be
invalidated. These two conditions should align.

Fixes: 20ee4382322c ("f2fs: issue small discard by LBA order")
Signed-off-by: Dongdong Zhang <zhangdongdong1@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to invalidate dcc->f2fs_issue_discard in error path

[ Upstream commit 91586ce0d39a05f88795aa8814fb99b1387236b3 ]

Syzbot reports a NULL pointer dereference issue as below:

 __refcount_add include/linux/refcount.h:193 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 get_task_struct include/linux/sched/task.h:110 [inline]
 kthread_stop+0x34/0x1c0 kernel/kthread.c:703
 f2fs_stop_discard_thread+0x3c/0x5c fs/f2fs/segment.c:1638
 kill_f2fs_super+0x5c/0x194 fs/f2fs/super.c:4522
 deactivate_locked_super+0x70/0xe8 fs/super.c:332
 deactivate_super+0xd0/0xd4 fs/super.c:363
 cleanup_mnt+0x1f8/0x234 fs/namespace.c:1186
 __cleanup_mnt+0x20/0x30 fs/namespace.c:1193
 task_work_run+0xc4/0x14c kernel/task_work.c:177
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0x26c/0xbe0 kernel/exit.c:795
 do_group_exit+0x60/0xe8 kernel/exit.c:925
 __do_sys_exit_group kernel/exit.c:936 [inline]
 __se_sys_exit_group kernel/exit.c:934 [inline]
 __wake_up_parent+0x0/0x40 kernel/exit.c:934
 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
 el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
 do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
 el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
 el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581

The root cause of this issue is in error path of f2fs_start_discard_thread(),
it missed to invalidate dcc->f2fs_issue_discard, later kthread_stop() may
access invalid pointer.

Fixes: 4d67490498ac ("f2fs: Don't create discard thread when device doesn't support realtime discard")
Reported-by: syzbot+035a381ea1afb63f098d@syzkaller.appspotmail.com
Reported-by: syzbot+729c925c2d9fc495ddee@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix memleak in alloc_ns()

[ Upstream commit e9e6fa49dbab6d84c676666f3fe7d360497fd65b ]

After changes in commit a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it.

Fixes: a1bd627b46d1 ("apparmor: share profile name on replacement")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - rework by using crypto_engine

[ Upstream commit 57d67c6e8219b2a034c16d6149e30fb40fd39935 ]

Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - remove non-aligned handling

[ Upstream commit bb3c7b73363c9a149b12b74c44ae94b73a8fddf8 ]

Now driver have fallback for un-aligned cases, remove all code handling
those cases.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - better handle cipher key

[ Upstream commit d6b23ccef82816050c2fd458c9dabfa0e0af09b9 ]

The key should not be set in hardware too much in advance, this will
fail it 2 TFM with different keys generate alternative requests.
The key should be stored and used just before doing cipher operations.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - add fallback for ahash

[ Upstream commit 816600485cb597b3ff7d6806a95a78512839f775 ]

Adds a fallback for all case hardware cannot handle.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - add fallback for cipher

[ Upstream commit 68ef8af09a1a912a5ed2cfaa4cca7606f52cef90 ]

The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - do not store mode globally

[ Upstream commit 87e356c4966444866186f68f05832fdcc0f351a3 ]

Storing the mode globally does not work if 2 requests are handled in the
same time.
We should store it in a request context.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - do not do custom power management

[ Upstream commit c50ef1411c8cbad0c7db100c477126076b6e3348 ]

The clock enable/disable at tfm init/exit is fragile,
if 2 tfm are init in the same time and one is removed just after,
it will leave the hardware uncloked even if a user remains.

Instead simply enable clocks at probe time.
We will do PM later.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Fix the race condition of resize flag between resizefs

[ Upstream commit 28fc4e9077ce59ab28c89c20dc6be5154473218f ]

Because the set/clear SBI_IS_RESIZEFS flag not between any locks,
In the following case:
  thread1 thread2
   ->ioctl(resizefs)
    ->set RESIZEFS flag  ->ioctl(resizefs)
    ...                      ->set RESIZEFS flag
    ->clear RESIZEFS flag
       ->resizefs stream
    # No RESIZEFS flag in the stream

Also before freeze_super, the resizefs not started, we should not set
the SBI_IS_RESIZEFS flag.

So move the set/clear SBI_IS_RESIZEFS flag between the cp_mutex and
gc_lock.

Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled

[ Upstream commit 6acd25cc98ce0c9ee4fefdaf44fc8bca534b26e5 ]

The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.

Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Fix order of nldev_exit call

[ Upstream commit 4508d32ccced24c972bc4592104513e1ff8439b5 ]

Create symmetrical exit flow by calling to nldev_exit() after
call to rdma_nl_unregister(RDMA_NL_LS).

Fixes: 6c80b41abe22 ("RDMA/netlink: Add nldev initialization flows")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/64e676774a53a406f4cde265d5a4cfd6b8e97df9.1666683334.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Fix n_fts[] array overrun

[ Upstream commit 66110361281b2f7da0c8bd51eaf1f152f4236035 ]

commit aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.

Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes: aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Use pointer to struct aa_label for lbs_cred

[ Upstream commit 37923d4321b1e38170086da2c117f78f2b0f49c6 ]

According to the implementations of cred_label() and set_cred_label(),
we should use pointer to struct aa_label for lbs_cred instead of struct
aa_task_ctx, this patch fixes it.

Fixes: bbd3662a8348 ("Infrastructure management of the cred security blob")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix a race between scsi_done() and scsi_timeout()

[ Upstream commit 978b7922d3dca672b41bb4b8ce6c06ab77112741 ]

If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.

Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.

Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: nitrox - avoid double free on error path in nitrox_sriov_init()

[ Upstream commit 094528b6a5a755b1195a01e10b13597d67d1a0e6 ]

If alloc_workqueue() fails in nitrox_mbox_init() it deallocates
ndev->iov.vfdev and returns error code, but then nitrox_sriov_init()
calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated
again.

Fix this by nulling ndev->iov.vfdev after the first deallocation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 9e5de3e06e54 ("crypto: cavium/nitrox - Add mailbox...")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - use dma_addr instead u32

[ Upstream commit 839b8ae2fc10f205317bcc32c9de18456756e1f5 ]

The DMA address need to be stored in a dma_addr_t

Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix missing destroy qp_idr

[ Upstream commit 116be08f6e4e385733d42360a33c3d883d2dd702 ]

In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix abi check to include v8 abi

[ Upstream commit 1b5a6198f5a9d0aa5497da0dc4bcd4fc166ee516 ]

The v8 abi is supported by the kernel but the userspace supported
version check does not allow for it. This was missed when v8 was added
due to a bug in the userspace compiler which was setting an older abi
version for v8 encoding (which is forward compatible except on the
network encoding). However it is possible to detect the network
encoding by checking the policydb network support which the code
does. The end result was that missing the abi flag worked until
userspace was fixed and began correctly checking for the v8 abi
version.

Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: fix lockdep warning when removing a namespace

[ Upstream commit 9c4557efc558a68e4cd973490fd936d6e3414db8 ]

Fix the following lockdep warning

[ 1119.158984] ============================================
[ 1119.158988] WARNING: possible recursive locking detected
[ 1119.158996] 6.0.0-rc1+ #257 Tainted: G            E    N
[ 1119.158999] --------------------------------------------
[ 1119.159001] bash/80100 is trying to acquire lock:
[ 1119.159007] ffff88803e79b4a0 (&ns->lock/1){+.+.}-{4:4}, at: destroy_ns.part.0+0x43/0x140
[ 1119.159028]
               but task is already holding lock:
[ 1119.159030] ffff8881009764a0 (&ns->lock/1){+.+.}-{4:4}, at: aa_remove_profiles+0x3f0/0x640
[ 1119.159040]
               other info that might help us debug this:
[ 1119.159042]  Possible unsafe locking scenario:

[ 1119.159043]        CPU0
[ 1119.159045]        ----
[ 1119.159047]   lock(&ns->lock/1);
[ 1119.159051]   lock(&ns->lock/1);
[ 1119.159055]
                *** DEADLOCK ***

Which is caused by an incorrect lockdep nesting notation

Fixes: feb3c766a3ab ("apparmor: fix possible recursive lock warning in __aa_create_ns")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: fix a memleak in multi_transaction_new()

[ Upstream commit c73275cf6834787ca090317f1d20dbfa3b7f05aa ]

In multi_transaction_new(), the variable t is not freed or passed out
on the failure of copy_from_user(t->data, buf, size), which could lead
to a memleak.

Fix this bug by adding a put_multi_transaction(t) in the error path.

Fixes: 1dea3b41e84c5 ("apparmor: speed up transactional queries")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path

[ Upstream commit e095493091e850d5292ad01d8fbf5cde1d89ac53 ]

If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.

Fixes: 328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix the inability to attach XDP program on downed interface

[ Upstream commit 0c87b545a2ed5cd8a6318011f1c92b188c2d74bc ]

Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.

Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.

Fixes: 613142b0bb88 ("i40e: Log error for oversized MTU on device")
Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.com>
Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: fix potential division by 0

[ Upstream commit ede5a389852d3640a28e7187fb32b7f204380901 ]

When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().

Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.

[   95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[   95.095964] dwmac1000: Master AXI performs any burst length
[   95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[   95.109428] Division by zero in kernel.
[   95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[   95.123686] Hardware name: Altera SOCFPGA
[   95.127695]  unwind_backtrace from show_stack+0x10/0x14
[   95.132938]  show_stack from dump_stack_lvl+0x40/0x4c
[   95.137992]  dump_stack_lvl from Ldiv0+0x8/0x10
[   95.142527]  Ldiv0 from __aeabi_uidivmod+0x8/0x18
[   95.147232]  __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[   95.152552]  div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[   95.158826]  stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[   95.165533]  stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[   95.171117]  __stmmac_open from stmmac_open+0x30/0x44
[   95.176182]  stmmac_open from __dev_open+0x11c/0x134
[   95.181172]  __dev_open from __dev_change_flags+0x168/0x17c
[   95.186750]  __dev_change_flags from dev_change_flags+0x14/0x50
[   95.192662]  dev_change_flags from devinet_ioctl+0x2b4/0x604
[   95.198321]  devinet_ioctl from inet_ioctl+0x1ec/0x214
[   95.203462]  inet_ioctl from sock_ioctl+0x14c/0x3c4
[   95.208354]  sock_ioctl from vfs_ioctl+0x20/0x38
[   95.212984]  vfs_ioctl from sys_ioctl+0x250/0x844
[   95.217691]  sys_ioctl from ret_fast_syscall+0x0/0x4c
[   95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[   95.227790] 1fa0:                   00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[   95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[   95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74

Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Fixes: 91a2559c1dc5 ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 0ba18967d4544955b2eff2fbc4f2a8750c4df90a ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 39c1eb6fcbae8ce9bb71b2ac5cb609355a2b181b ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 9238f36a5a50 ("Bluetooth: Add request cmd_complete and cmd_status functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 8f458f783dfbb19c1f1cb58ed06eeb701f52091b ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()

[ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()

[ Upstream commit cee50ce899de415baf4da3ed38b7d4f13c3170d1 ]

skb allocated by __hci_cmd_sync would not be used whether in checking
for supported iBT hardware variants or after, we should free it in all
error branches, this patch makes the case read version failed or default
error case free skb before return.

Fixes: c86c7285bb08 ("Bluetooth: btintel: Fix the legacy bootloader returns tlv based version")
Fixes: 019a1caa7fd2 ("Bluetooth: btintel: Refactoring setup routine for bootloader devices")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS

[ Upstream commit 3b1c7c00b8c22b3cb79532252c59eb0b287bb86d ]

When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS
command, use the correct op code in error status report:
was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS.

Fixes: 12410572833a2 ("Bluetooth: Break add adv into two mgmt commands")
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: sysctl: make extra pointers netns aware

[ Upstream commit da05cecc4939c0410d56c29e252998b192756318 ]

Recently, a customer reported that from their container whose
net namespace is different to the host's init_net, they can't set
the container's net.sctp.rto_max to any value smaller than
init_net.sctp.rto_min.

For instance,
Host:
sudo sysctl net.sctp.rto_min
net.sctp.rto_min = 1000

Container:
echo 100 > /mnt/proc-net/sctp/rto_min
echo 400 > /mnt/proc-net/sctp/rto_max
echo: write error: Invalid argument

This is caused by the check made from this'commit 4f3fdf3bc59c
("sctp: add check rto_min and rto_max in sysctl")'
When validating the input value, it's always referring the boundary
value set for the init_net namespace.

Having container's rto_max smaller than host's init_net.sctp.rto_min
does make sense. Consider that the rto between two containers on the
same host is very likely smaller than it for two hosts.

So to fix this problem, as suggested by Marcelo, this patch makes the
extra pointers of rto_min, rto_max, pf_retrans, and ps_retrans point
to the corresponding variables from the newly created net namespace while
the new net namespace is being registered in sctp_sysctl_net_register.

Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl")
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Firo Yang <firo.yang@suse.com>
Link: https://lore.kernel.org/r/20221209054854.23889-1-firo.yang@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntb_netdev: Use dev_kfree_skb_any() in interrupt context

[ Upstream commit 5f7d78b2b12a9d561f48fa00bab29b40f4616dad ]

TX/RX callback handlers (ntb_netdev_tx_handler(),
ntb_netdev_rx_handler()) can be called in interrupt
context via the DMA framework when the respective
DMA operations have completed. As such, any calls
by these routines to free skb's, should use the
interrupt context safe dev_kfree_skb_any() function.

Previously, these callback handlers would call the
interrupt unsafe version of dev_kfree_skb(). This has
not presented an issue on Intel IOAT DMA engines as
that driver utilizes tasklets rather than a hard
interrupt handler, like the AMD PTDMA DMA driver.
On AMD systems, a kernel WARNING message is
encountered, which is being issued from
skb_release_head_state() due to in_hardirq()
being true.

Besides the user visible WARNING from the kernel,
the other symptom of this bug was that TCP/IP performance
across the ntb_netdev interface was very poor, i.e.
approximately an order of magnitude below what was
expected. With the repair to use dev_kfree_skb_any(),
kernel WARNINGs from skb_release_head_state() ceased
and TCP/IP performance, as measured by iperf, was on
par with expected results, approximately 20 Gb/s on
AMD Milan based server. Note that this performance
is comparable with Intel based servers.

Fixes: 765ccc7bc3d91 ("ntb_netdev: correct skb leak")
Fixes: 548c237c0a997 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209000659.8318-1-epilmore@gigaio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan9303: Fix read error execution path

[ Upstream commit 8964916d206071b058c6351f88b1966bd58cbde0 ]

This patch fixes an issue where a read failure of a port statistic counter
will return unknown results.  While it is highly unlikely the read will
ever fail, it is much cleaner to return a zero for the stat count.

Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221209153502.7429-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: tcan4x5x: Fix use of register error status mask

[ Upstream commit 67727a17a6b375d68fe569b77e6516b034b834c0 ]

TCAN4X5X_ERROR_STATUS is not a status register that needs clearing
during interrupt handling. Instead this is a masking register that masks
error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register
effectively masks everything.

Rename the register and mask all error interrupts only once by writing
to the register in tcan4x5x_init.

Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-10-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: m_can: Call the RAM init directly from m_can_chip_config

[ Upstream commit eaacfeaca7ad0804b9a6eff7afeba93a87db7638 ]

When we try to access the mcan message ram addresses during the probe,
hclk is gated by any other drivers or disabled, because of that probe
gets failed.

Move the mram init functionality to mcan chip config called by
m_can_start from mcan open function, by that time clocks are
enabled.

Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Vivek Yadav <vivek.2311@samsung.com>
Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 67727a17a6b3 ("can: tcan4x5x: Fix use of register error status mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: tcan4x5x: Remove invalid write in clear_interrupts

[ Upstream commit 40c9e4f676abbe194541d88e796341c92d5a13c0 ]

Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes
to this register do not have any effect.

Remove this write. The m_can driver aldready clears the interrupts in
m_can_isr() by writing to M_CAN_IR which is translated to register
0x1050 which is a writable version of this register.

Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-9-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Check only the minimum speed for active/passive cables

[ Upstream commit f8ab263d4d48e6dab752029bf562f20a2ee630ed ]

There are cables that exist that can support speeds in excess of 10GbE.
The driver, however, restricts the EEPROM advertised nominal bitrate to
a specific range, which can prevent usage of cables that can support,
for example, up to 25GbE.

Rather than checking that an active or passive cable supports a specific
range, only check for a minimum supported speed.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Fix logic around active and passive cables

[ Upstream commit 4998006c73afe44e2f639d55bd331c6c26eb039f ]

SFP+ active and passive cables are copper cables with fixed SFP+ end
connectors. Due to a misinterpretation of this, SFP+ active cables could
end up not being recognized, causing the driver to fail to establish a
connection.

Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is
the default cable type, and handle active and passive cables when they are
specifically detected.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: call proto_unregister() in the error path in af_unix_init()

[ Upstream commit 73e341e0281a35274629e9be27eae2f9b1b492bf ]

If register unix_stream_proto returns error, unix_dgram_proto needs
be unregistered.

Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit 6151d105dfce8c23edf30eed35e97f3d9b96a35c ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.

In these two cases, dev_kfree_skb() is called consume the xmited SKB,
so replace it with dev_consume_skb_irq().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit 3727f742915f04f6fc550b80cf406999bd4e90d0 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.

In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs,
so replace it with dev_kfree_skb_irq().

In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed
queue length, so replace it with dev_kfree_skb_irq().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit f07fadcbee2a5e84caa67c7c445424200bffb60b ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

In this case, the lock is used to protected 'bp', so we can move
dev_kfree_skb() after the spin_unlock_irqrestore().

Fixes: 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit d1678bf45f21fa5ae4a456f821858679556ea5f8 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.

In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to
drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().

Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit 5fe02e046e6422c4adfdbc50206ec7186077da24 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.

In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit 3dfe3486c1cd4f82b466b7d307f23777137b8acc ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.

In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/tunnel: wait until all sk_user_data reader finish before releasing the sock

[ Upstream commit 3cf7203ca620682165706f70a1b12b5194607dce ]

There is a race condition in vxlan that when deleting a vxlan device
during receiving packets, there is a possibility that the sock is
released after getting vxlan_sock vs from sk_user_data. Then in
later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got
NULL pointer dereference. e.g.

   #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757
   #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d
   #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48
   #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b
   #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb
   #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542
   #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62
      [exception RIP: vxlan_ecn_decapsulate+0x3b]
      RIP: ffffffffc1014e7b  RSP: ffffa25ec6978cb0  RFLAGS: 00010246
      RAX: 0000000000000008  RBX: ffff8aa000888000  RCX: 0000000000000000
      RDX: 000000000000000e  RSI: ffff8a9fc7ab803e  RDI: ffff8a9fd1168700
      RBP: ffff8a9fc7ab803e   R8: 0000000000700000   R9: 00000000000010ae
      R10: ffff8a9fcb748980  R11: 0000000000000000  R12: ffff8a9fd1168700
      R13: ffff8aa000888000  R14: 00000000002a0000  R15: 00000000000010ae
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
   #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan]
   #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507
   #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45
  #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807
  #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951
  #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde
  #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b
  #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139
  #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a
  #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3
  #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca
  #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3

Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh

Fix this by waiting for all sk_user_data reader to finish before
releasing the sock.

Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Fixes: 6a93cc905274 ("udp-tunnel: Add a few more UDP tunnel APIs")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: farsync: Fix kmemleak when rmmods farsync

[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ]

There are two memory leaks reported by kmemleak:

  unreferenced object 0xffff888114b20200 (size 128):
    comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s)
    hex dump (first 32 bytes):
      e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff  .bW......bW.....
      01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
      [<ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0
      [<ffffffff83d3989d>] dev_addr_init+0x13d/0x230
      [<ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50
      [<ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80
      [<ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync]
      ...

  unreferenced object 0xffff88810b85b000 (size 1024):
    comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s)
    hex dump (first 32 bytes):
      00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff  .........p......
      00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00  ................
    backtrace:
      [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
      [<ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync]
      [<ffffffff82060e83>] local_pci_probe+0xd3/0x170
      ...

The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.

Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()

[ Upstream commit 6cee96e09df54ae17784c0f38a49e0ed8229b825 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.

In this case, dev_kfree_skb() is called in free_tx_buffers() to drop
the SKBs in tx buffers, when the card is down, so replace it with
dev_kfree_skb_irq() here.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()

[ Upstream commit ee9d7a0e754568180a2f8ebc4aad226278a9116f ]

When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference.

Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221211023337.592266-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()

[ Upstream commit 01de1123322e4fe1bbd0fcdf0982511b55519c03 ]

If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp
needs to be freed.

Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix possible memory leak in stmmac_dvr_probe()

[ Upstream commit a137f3f27f9290933fe7e40e6dc8a445781c31a2 ]

The bitmap_free() should be called to free priv->af_xdp_zc_qps
when create_singlethread_workqueue() fails, otherwise there will
be a memory leak, so we add the err path error_wq_init to fix it.

Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()

[ Upstream commit f150b63f3fa5fdd81e0dd6151e8850268e29438c ]

The skb allocated by stmmac_test_get_arp_skb() hasn't been released in
some error handling case, which will lead to a memory leak. Fix this up
by adding kfree_skb() to release skb.

Compile tested only.

Fixes: 5e3fb0a6e2b3 ("net: stmmac: selftests: Implement the ARP Offload test")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: defxx: Fix missing err handling in dfx_init()

[ Upstream commit ae18dcdff0f8d7e84cd3fd9f496518b5e72d185d ]

When eisa_driver_register() or tc_register_driver() failed,
the modprobe defxx would fail with some err log as follows:

 Error: Driver 'defxx' is already registered, aborting...

Fix this issue by adding err hanling in dfx_init().

Fixes: e89a2cfb7d7b5 ("[TC] defxx: TURBOchannel support")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: vmw_vsock: vmci: Check memcpy_from_msg()

[ Upstream commit 44aa5a6dba8283bfda28b1517af4de711c5652a4 ]

vmci_transport_dgram_enqueue() does not check the return value
of memcpy_from_msg().  If memcpy_from_msg() fails, it is possible that
uninitialized memory contents are sent unintentionally instead of user's
message in the datagram to the destination.  Return with an error if
memcpy_from_msg() fails.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 0f7db23a07af ("vmci_transport: switch ->enqeue_dgram, ->enqueue_stream and ->dequeue_stream to msghdr")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: socfpga: Fix memory leak in socfpga_gate_init()

[ Upstream commit 0b8ba891ad4d1ef6bfa4c72efc83f9f9f855f68b ]

Free @socfpga_clk and @ops on the error path to avoid memory leak issue.

Fixes: a30a67be7b6e ("clk: socfpga: Don't have get_parent for single parent ops")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123031622.63171-1-xiujianfeng@huawei.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Do not zero-extend kfunc return values

[ Upstream commit d35af0a7feb077c43ff0233bba5a8c6e75b73e35 ]

In BPF all global functions, and BPF helpers return a 64-bit
value. For kfunc calls, this is not the case, and they can return
e.g. 32-bit values.

The return register R0 for kfuncs calls can therefore be marked as
subreg_def != DEF_NOT_SUBREG. In general, if a register is marked with
subreg_def != DEF_NOT_SUBREG, some archs (where bpf_jit_needs_zext()
returns true) require the verifier to insert explicit zero-extension
instructions.

For kfuncs calls, however, the caller should do sign/zero extension
for return values. In other words, the compiler is responsible to
insert proper instructions, not the verifier.

An example, provided by Yonghong Song:

$ cat t.c
extern unsigned foo(void);
unsigned bar1(void) {
     return foo();
}
unsigned bar2(void) {
     if (foo()) return 10; else return 20;
}

$ clang -target bpf -mcpu=v3 -O2 -c t.c && llvm-objdump -d t.o
t.o:    file format elf64-bpf

Disassembly of section .text:

0000000000000000 <bar1>:
0:       85 10 00 00 ff ff ff ff call -0x1
1:       95 00 00 00 00 00 00 00 exit

0000000000000010 <bar2>:
2:       85 10 00 00 ff ff ff ff call -0x1
3:       bc 01 00 00 00 00 00 00 w1 = w0
4:       b4 00 00 00 14 00 00 00 w0 = 0x14
5:       16 01 01 00 00 00 00 00 if w1 == 0x0 goto +0x1 <LBB1_2>
6:       b4 00 00 00 0a 00 00 00 w0 = 0xa

0000000000000038 <LBB1_2>:
7:       95 00 00 00 00 00 00 00 exit

If the return value of 'foo()' is used in the BPF program, the proper
zero-extension will be done.

Currently, the verifier correctly marks, say, a 32-bit return value as
subreg_def != DEF_NOT_SUBREG, but will fail performing the actual
zero-extension, due to a verifier bug in
opt_subreg_zext_lo32_rnd_hi32(). load_reg is not properly set to R0,
and the following path will be taken:

if (WARN_ON(load_reg == -1)) {
verbose(env, "verifier bug. zext_dst is set, but no reg is defined\n");
return -EFAULT;
}

A longer discussion from v1 can be found in the link below.

Correct the verifier by avoiding doing explicit zero-extension of R0
for kfunc calls. Note that R0 will still be marked as a sub-register
for return values smaller than 64-bit.

Fixes: 83a2881903f3 ("bpf: Account for BPF_FETCH in insn_has_def32()")
Link: https://lore.kernel.org/bpf/20221202103620.1915679-1-bjorn@kernel.org/
Suggested-by: Yonghong Song <yhs@meta.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221207103540.396496-1-bjorn@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blktrace: Fix output non-blktrace event when blk_classic option enabled

[ Upstream commit f596da3efaf4130ff61cd029558845808df9bf99 ]

When the blk_classic option is enabled, non-blktrace events must be
filtered out. Otherwise, events of other types are output in the blktrace
classic format, which is unexpected.

The problem can be triggered in the following ways:

  # echo 1 > /sys/kernel/debug/tracing/options/blk_classic
  # echo 1 > /sys/kernel/debug/tracing/events/enable
  # echo blk > /sys/kernel/debug/tracing/current_tracer
  # cat /sys/kernel/debug/tracing/trace_pipe

Fixes: c71a89615411 ("blktrace: add ftrace plugin")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20221122040410.85113-1-yangjihong1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()

[ Upstream commit c2f2924bc7f9ea75ef8d95863e710168f8196256 ]

Fix to return a negative error code instead of 0 when
brcmf_chip_set_active() fails. In addition, change the return
value for brcmf_pcie_exit_download_state() to keep consistent.

Fixes: d380ebc9b6fb ("brcmfmac: rename chip download functions")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1669959342-27144-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Fix the channel width reporting

[ Upstream commit 76c16af2cb10282274596e21add2c9f0b95c941b ]

The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver
reports about the TX rate, and the driver passes these reports to
sta_statistics. The reports from RTL8192EU may or may not include the
channel width. The reports from RTL8188FU do not include it.

Only access the c2h->ra_report.bw field if the report (skb) is big
enough.

The other problem fixed here is that the code was actually never
changing the channel width initially reported by
rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.

Fixes: 0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5b41f1ae-72e7-6b7a-2459-b736399a1c40@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h

[ Upstream commit dd469a754afdb782ba3033cee102147493dc39f4 ]

This struct is used to access a sequence of bytes received from the
wifi chip. It must not have any padding bytes between the members.

This doesn't change anything on my system, possibly because currently
none of the members need more than byte alignment.

Fixes: b2b43b7837ba ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1a270918-da22-ff5f-29fc-7855f740c5ba@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode

[ Upstream commit 3a6f994f848a69deb2bf3cd9d130dd0c09730e55 ]

The addition of 3WIRE support would affect MOSI direction even
when still in standard (4 wire) mode. This can lead to MOSI being
at an invalid logic level when a device driver sets an SPI
message with a NULL tx_buf.

spi.h states that if tx_buf is NULL then "zeros will be shifted
out ... " If MOSI is tristated then the data shifted out is subject
to pull resistors, keepers, or in the absence of those, noise.

This issue came to light when using spi-gpio connected to an
ADS7843 touchscreen controller. MOSI pulled high when clocking
MISO data in caused the SPI device to interpret this as a command
which would put the device in an unexpected and non-functional
state.

Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support")
Fixes: 5132b3d28371 ("spi: gpio: Support 3WIRE high-impedance turn-around")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://lore.kernel.org/r/20221207230853.6174-1-kris@embeddedTS.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: Fix memory leak in _samsung_clk_register_pll()

[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]

If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.

Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: Add check for kmalloc

[ Upstream commit 6e5e5defdb8b0186312c2f855ace175aee6daf9b ]

As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: Add check for dcoda_iram_alloc

[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]

As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: c8sectpfe: Add of_node_put() when breaking out of loop

[ Upstream commit 63ff05a1ad242a5a0f897921c87b70d601bda59c ]

In configure_channels(), we should call of_node_put() when breaking
out of for_each_child_of_node() which will automatically increase
and decrease the refcount.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()

[ Upstream commit cf34ac6aa2b12fb0c3aacfdcae8acd7904b949ec ]

The reg_node needs to be released through of_node_put() in the error
handling path when of_irq_get_byname() failed.

Fixes: 390af53e0411 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221203062109.115043-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Normalize the error handling branch in sd_read_ext_regs()

[ Upstream commit fc02e2b52389c8fde02852b2f959c0b45f042bbd ]

Let's use pr_err() to output the error messages and let's extend a comment
to clarify why returning 0 (success) in one case make sense.

Fixes: c784f92769ae ("mmc: core: Read the SD function extension registers for power management")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[Ulf: Clarified the comment and the commit-msg]
Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick/ms_block: Add check for alloc_ordered_workqueue

[ Upstream commit 4f431a047a5c8698ed4b67e2760cfbeb5fffb69d ]

As the alloc_ordered_workqueue may return NULL pointer, it should be better
to add check for the return value. Moreover, the msb->io_queue should be
freed if error occurs later.

Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick: ms_block: Add error handling support for add_disk()

[ Upstream commit 2304c55fd506fcd5e1a59ae21a306ee82507340b ]

We never checked for errors on add_disk() as this function returned void.
Now that this is fixed, use the shiny new error handling.

Contrary to the typical removal which delays the put_disk() until later,
since we are failing on a probe we immediately put the disk on failure from
add_disk by using blk_cleanup_disk().

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210902174105.2418771-3-mcgrof@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 4f431a047a5c ("memstick/ms_block: Add check for alloc_ordered_workqueue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: renesas_sdhi: alway populate SCC pointer

[ Upstream commit 3d4f9898c1c74323dd61d6a8a0efca9401232ad4 ]

We need the SCC pointer to reset the device, so populate it even when we
don't need it for tuning.

Fixes: 45bffc371fef ("mmc: renesas_sdhi: only reset SCC when its pointer is populated")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>