drm/tve200: Add new driver for TVE200

This adds a new DRM driver for the Faraday Technology TVE200
block. This "TV Encoder" encodes a ITU-T BT.656 stream and can
be found in the StorLink SL3516 (later Cortina Systems CS3516)
as well as the Grain Media GM8180.

I do not have definitive word from anyone at Faraday that this
IP block is theirs, but it bears the hallmark of their 3-digit
version code (200) and is used in two SoCs from completely
different companies. (Grain Media was fully owned by Faraday
until it was transferred to NovoTek this january, and
Faraday did lots of work on the StorLink SoCs.)

The D-Link DIR-685 uses this in connection with the Ilitek
ILI9322 panel driver that supports BT.656 input, while the
GM8180 apparently has been used with the Cirrus Logic CS4954
digital video encoder. The oldest user seems to be
something called Techwall 2835.

This driver is heavily inspired by Eric Anholt's PL111
driver and therefore I have mentioned all the ancestor authors
in the header file.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-2-linus.walleij@linaro.org

drm/tve200: Add DT bindings

This adds device tree bindings for the Faraday TVE200 IP block.
This IP block is present in the Gemini ARM SoC and also in some
Grain Media GMxxxx SoCs.

Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-1-linus.walleij@linaro.org

drm/doc: Document ioctl errno value patterns

We're not super-consistent about these, but I think it's worth to
document at least the commmon patterns.

v2:
- Add a not about ENOTTY (it's just a confusing name, but used
exactly what it's meant for in DRM) (Chris).
- Unconfuse the text for ENODEV (Daniel)
- Move text undert the IOCTL heading (Chris).
- typos

Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhang, Tina" <tina.zhang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818174328.6386-1-daniel.vetter@ffwll.ch

drm/dp: Add defines for DP SDP types

Add defines for the secondary data packet (SDP) types from the spec.
These are the DP specific ones, and in addition HDMI infoframe types
(see enum hdmi_infoframe_type) are also valid SDP types.

v2: Add more SDP types
v3: Note the DP version that added each SDP type (Rodrigo)

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-2-ville.syrjala@linux.intel.com

drm: Release driver tracking before making the object available again

This is the same bug as we fixed in commit f6cd7daecff5 ("drm: Release
driver references to handle before making it available again"), but now
the exposure is via the PRIME lookup tables. If we remove the
object/handle from the PRIME lut, then a new request for the same
object/fd will generate a new handle, thus for a short window that
object is known to userspace by two different handles. Fix this by
releasing the driver tracking before PRIME.

Fixes: 0ff926c7d4f0 ("drm/prime: add exported buffers to current fprivs
imported buffer list (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.uk

drm: i2c: tda998x: constify i2c_device_id

i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1503167300-17334-4-git-send-email-arvind.yadav.cs@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/60db0ba6ddce08444299533e97c9adec3b3ef1bb.1503311145.git.arvind.yadav.cs@gmail.com

drm: i2c: sil164: constify i2c_device_id

i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1503167300-17334-3-git-send-email-arvind.yadav.cs@gmail.com

drm: i2c: ch7006: constify i2c_device_id

i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1503167300-17334-2-git-send-email-arvind.yadav.cs@gmail.com

drm/bridge: change return type of drm_bridge_add function

This patch changes return type of drm_bridge_add function.

This function never return negative value but returns only 0.
So it changes the return type of this function to void one.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1499071350-25168-2-git-send-email-inki.dae@samsung.com

drm/exynos: mic: clean up drm_bridge_add call

This patch removes unnecessary checking of return value.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1499071350-25168-13-git-send-email-inki.dae@samsung.com

drm/sti: sti_vdo: clean up drm_bridge_add call

This patch removes unnecessary checking of return value.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1499071350-25168-15-git-send-email-inki.dae@samsung.com

drm/mediatek: hdmi: clean up drm_bridge_add call

This patch removes unnecessary checking of return value.

Acked-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1499071350-25168-14-git-send-email-inki.dae@samsung.com

dma-buf/sync_file: document flags field

Documentation for it was missing.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731193655.6176-1-gustavo@padovan.org

drm/panel: Add driver for Seiko 43WVF1G panel

Add driver for Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480)
TFT with Touch-Panel.

Datasheet available at:
http://www.glyn.de/data/glyn/media/doc/43wvf1g-0.pdf

Seiko 43WVF1G panel has two power supplies: avdd and dvdd and they
require a specific power on/down sequence.
For this reason the simple panel driver cannot be used to drive this
panel, so create a new one heavily based on simple panel.

Based on initial patch submission from Breno Lima.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500567179-6967-1-git-send-email-marco.franchi@nxp.com

MAINTAINERS: drm/panel is now maintained in drm-misc

drm/panel is a good candidate for the drm-misc group maintainership and
it's been maintained in the common drm-misc tree for a release, so make
it official.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170814140011.1336-1-thierry.reding@gmail.com

drm/panel: simple: Remove unneeded gpiod NULL check

The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500249939-8075-1-git-send-email-festevam@gmail.com

drm/panel: simple: Add missing panel_simple_unprepare() calls

During panel removal or system shutdown panel_simple_disable() is called
which disables the panel backlight but the panel is still powered due to
missing calls to panel_simple_unprepare().

Fixes: d02fd93e2cd8 ("drm/panel: simple - Disable panel on shutdown")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170807115545.27747-1-net147@gmail.com

drm/panel: simple: Fix width and height for Olimex LCD-OLinuXino-4.3TS

The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm
but the active display area is 95.04 (W) x 53.856 (H) mm.

The width and height should be set to the active display area.

Signed-off-by: Jonathan Liu <net147@gmail.com>
Fixes: cf5c9e6dc70d ("drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720102943.25091-1-net147@gmail.com

drm/panel: Add support for OTM8009A panel driver

This patch adds Orise Tech OTM8009A 3.97" 480x800 TFT LCD
panel driver (MIPI-DSI video mode). The panel backlight is
managed through the DSI link. This panel driver is used in
several STM32 boards.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500297593-30633-4-git-send-email-philippe.cornu@st.com

dt-bindings: display: panel: Add support for Orise Tech OTM8009A DSI panel

The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
a MIPI-DSI video interface. Its backlight is managed through the DSI link.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500297593-30633-3-git-send-email-philippe.cornu@st.com

dt-bindings: Add vendor prefix for Orise Technology

Orise Technology is headquartered in Taiwan and specializes
in manufacture of Flat Panel Display Driver IC and Flat Panel
Display Controller IC.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500297593-30633-2-git-send-email-philippe.cornu@st.com

drm/panel: simple: Skip error message on deferred probe

When enable_gpio is provided via an I2C or SPI expander, it may not be
available when panel-simple probes leading to the following error:

panel-simple panel: failed to request GPIO: -517

As this error message is not very useful to the end user, skip printing
it in the case of deferred probe.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1498857286-10820-1-git-send-email-festevam@gmail.com

drm/panel: Add support for S6E63J0X03 panel

This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver
which uses MIPI DSI bus to communicate with panel. The panel has
320×320 resolution in 1.63" physical panel. This panel is used in
Samsung Galaxy Gear 2.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-3-git-send-email-hoegeun.kwon@samsung.com

dt-bindings: Add binding for Samsung S6E63J0X03 panel

The Samsung S6E63J0X03 is a 1.63" 320x320 AMOLED panel connected using
MIPI-DSI interfaces.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-2-git-send-email-hoegeun.kwon@samsung.com

Merge airlied/drm-next into drm-misc-next

Archit requested this backmerge to facilitate merging some patches
depending on changes between -rc2 & -rc5

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: udl: constify usb_device_id

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/22fa8ca67a6d4a59997f463bf241ed56596fbcfa.1502526524.git.arvind.yadav.cs@gmail.com

drm/gma500: fix potential NULL pointer dereference dereference

NULL check at line 528: if (!sender || !data_out || !len_out) {, implies
that pointer _sender_ might be NULL.

Move pointer _sender_ dereference after NULL check in order to avoid a
potential NULL pointer dereference.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170812015515.GA8360@embeddedgus

Merge tag 'omapdrm-4.14' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for v4.14

* HDMI hot plug IRQ support (instead of polling)
* Big driver cleanup from Laurent (no functional changes)
* OMAP5 DSI support (only the pinmuxing was missing)

* tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits)
  drm/omap: Potential NULL deref in omap_crtc_duplicate_state()
  drm/omap: remove no-op cleanup code
  drm/omap: rename omapdrm device back
  drm: omapdrm: Remove omapdrm platform data
  ARM: OMAP2+: Don't register omapdss device for omapdrm
  ARM: OMAP2+: Remove unused omapdrm platform device
  drm: omapdrm: Remove the omapdss driver
  drm: omapdrm: Register omapdrm platform device in omapdss driver
  drm: omapdrm: hdmi: Don't allocate PHY features dynamically
  drm: omapdrm: hdmi: Configure the PHY from the HDMI core version
  drm: omapdrm: hdmi: Configure the PLL from the HDMI core version
  drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio
  drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version
  drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix
  drm/omap: add OMAP5 DSIPHY lane-enable support
  drm/omap: use regmap_update_bit() when muxing DSI pads
  drm: omapdrm: Remove dss_features.h
  drm: omapdrm: Move supported outputs feature to dss driver
  drm: omapdrm: Move DSS_FCK feature to dss driver
  drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver
  ...

Merge branch 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-next

More features for 4.14.  Nothing too major here.  I have a few more additional
patches for large page support in vega10 among other things, but they require
some resevation object patches from drm-misc-next, so I'll send that request
once you've pulled the latest drm-misc-next.  Highlights:
- Fixes for ACP audio on stoney
- SR-IOV fixes for vega10
- various powerplay fixes
- lots of code clean up

* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits)
  drm/amdgpu/gfx7: fix function name
  drm/amd/amdgpu: Disabling Power Gating for Stoney platform
  drm/amd/amdgpu: Added a quirk for Stoney platform
  drm/amdgpu: jt_size was wrongly counted twice
  drm/amdgpu: fix missing endian-safe guard
  drm/amdgpu: ignore digest_size when loading sdma fw for raven
  drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind()
  drm/amd/powerplay: fix coding style in hwmgr.c
  drm/amd/powerplay: refine dmesg info under powerplay.
  drm/amdgpu: don't finish the ring if not initialized
  drm/radeon: Fix preferred typo
  drm/amdgpu: Fix preferred typo
  drm/radeon: Fix stolen typo
  drm/amdgpu: Fix stolen typo
  drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c
  drm/amdgpu: set gfx_v9_0_ip_funcs as static
  drm/radeon: switch to drm_*{get,put} helpers
  drm/amdgpu: switch to drm_*{get,put} helpers
  drm/amd/powerplay: add CZ profile support
  drm/amd/powerplay: fix PSI not enabled by kmd
  ...

Merge tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:
- vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric)

Cross-subsystem Changes:
- vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained
     in staging

Core Changes:
- atomic_legacy_backoff is officially killed (Daniel)
- Extract drm_device.h (Daniel)
- Unregister drm device on unplug (Daniel)
- Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir)

Driver Changes:
- vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric)
- various: Make various drm_*_funcs structs const (Bhumika)
- tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David)
- various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Cihangir Akturk <cakturk@gmail.com>
Cc: David Lechner <david@lechnology.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
* tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits)
  drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset()
  drm/virtio: Use the drm_driver.dumb_destroy default
  drm/bochs: Use the drm_driver.dumb_destroy default
  drm/mgag200: Use the drm_driver.dumb_destroy default
  drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults
  drm/msm: Use the drm_driver.dumb_destroy default
  drm/ast: Use the drm_driver.dumb_destroy default
  drm/qxl: Use the drm_driver.dumb_destroy default
  drm/udl: Use the drm_driver.dumb_destroy default
  drm/cirrus: Use the drm_driver.dumb_destroy default
  drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults
  drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults
  drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults
  drm/meson: Use .dumb_map_offset and .dumb_destroy defaults
  drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults
  drm/vc4: Continue the switch to drm_*_put() helpers
  drm/vc4: Fix leak of HDMI EDID
  dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2
  dma-buf: add reservation_object_copy_fences (v2)
  drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD
  ...

drm/tinydrm: make function st7586_pipe_enable static

The function st7586_pipe_enable  is local to the source
and does not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'st7586_pipe_enable' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: David Lechner <david@lechnology.com>
[noralf: fixed: Alignment should match open parenthesis]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816092306.10969-1-colin.king@canonical.com

MAINTAINERS: Add drm/tinydrm maintainer entry

Add myself as drivers/gpu/drm/tinydrm maintainer.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502645790-14944-1-git-send-email-noralf@tronnes.org

drm/vc4: Use drm_gem_fb_create()

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-21-git-send-email-noralf@tronnes.org

drm/pl111: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()

drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now,
use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-14-git-send-email-noralf@tronnes.org

drm/fb-cma-helper: Use drm_gem_framebuffer_helper

Use the new drm_gem_framebuffer_helper who's code was copied
from this helper.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-3-git-send-email-noralf@tronnes.org

drm: Add GEM backed framebuffer library

This library provides helpers for drivers that don't subclass
drm_framebuffer and are backed by drm_gem_object. The code is
taken from drm_fb_cma_helper.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org

drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset()

There are no more users of drm_gem_cma_dumb_map_offset(), so remove it.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-20-git-send-email-noralf@tronnes.org

drm/virtio: Use the drm_driver.dumb_destroy default

virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy()
which is the drm_driver.dumb_destroy default, so no need to set it.

Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-19-git-send-email-noralf@tronnes.org

drm/bochs: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-17-git-send-email-noralf@tronnes.org

drm/mgag200: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-15-git-send-email-noralf@tronnes.org

drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and
remove exynos_drm_gem_dumb_map_offset().

Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-14-git-send-email-noralf@tronnes.org

drm/msm: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-13-git-send-email-noralf@tronnes.org

drm/ast: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-11-git-send-email-noralf@tronnes.org

drm/qxl: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-10-git-send-email-noralf@tronnes.org

drm/udl: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-9-git-send-email-noralf@tronnes.org

drm/cirrus: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-8-git-send-email-noralf@tronnes.org

drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-7-git-send-email-noralf@tronnes.org

drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-6-git-send-email-noralf@tronnes.org

drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-4-git-send-email-noralf@tronnes.org

drm/meson: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-3-git-send-email-noralf@tronnes.org

drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-2-git-send-email-noralf@tronnes.org

drm/omap: Potential NULL deref in omap_crtc_duplicate_state()

If the kmalloc() fails then we dereference "state" when we set
"state->zpos".

Fixes: 3dfeb631a15d ("drm/omap: Rework the rotation-on-crtc hack")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: remove no-op cleanup code

The driver sets crtc and plane rotation properties back to 0 degrees in
dev_lastclose() using drm_object_property_set_value().
drm_object_property_set_value() doesn't do anything with atomic drivers,
and a recent change added WARN_ON() when atomic driver calls the
function.

So remove the code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/omap: rename omapdrm device back

Now that creating the omapdrm device from the platform code has been
removed, we can rename the omapdrm device back to "omapdrm".

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Remove omapdrm platform data

The omapdrm platform data are not used anymore, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

ARM: OMAP2+: Don't register omapdss device for omapdrm

The omapdrm driver doesn't need the omapdss device anymore. Although it
can't be removed completely as the fbdev driver still requires it, we
can condition its registration to the usage of the omapfb driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

ARM: OMAP2+: Remove unused omapdrm platform device

The omapdrm platform device is unused, as a replacement is now
registered in the omapdss driver. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Remove the omapdss driver

The omapdss driver (not to be confused with the omapdss_dss driver) is
now a dummy driver with empty probe and remove functions. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Register omapdrm platform device in omapdss driver

The omapdrm platform device is a virtual device created for the sole
purpose of handling the omapdss/omapdrm driver split. It should
eventually be removed. As a first step to ease refactoring move its
registration from platform code to driver code.

The omapdrm driver name must be changed internally to avoid probing both
the device registered in platform code and the device registered in the
omapdss driver, as that would otherwise break bisection.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: hdmi: Don't allocate PHY features dynamically

There's no need to allocate memory dynamically to duplicate the contents
of a const structure, only to store the memory pointer in a const
pointer field. Just use the original structures directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: hdmi: Configure the PHY from the HDMI core version

The OMAP4 and OMAP5 HDMI PHYs have different properties that require
specific handling in the HDMI PHY driver. This needs knowledge of the
PHY version, which is currently inferred from the DSS version. As part
of the effort to remove usage of the DSS version, use the HDMI
controller version instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: hdmi: Configure the PLL from the HDMI core version

The OMAP4 and OMAP5 PLLs have different properties that require specific
handling in the HDMI PLL driver. This needs knowledge of the PLL
version, which is currently inferred from the DSS version. AS part of
the effort to remove usage of the DSS version, use the HDMI controller
version instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio

The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version

The HDMI wrapper code only needs to differentiate between major OMAP
revisions, which can be obtained from the HDMI transmitter compatible
string. Replace the OMAP SoC model checks to prepare for removal of the
OMAP SoC version platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix

The dsi_pll_ops structure and dsi_init_pll_data() function incorrectly
use a dsi_ prefix, likely due to copy & paste. Fix it by using the
correct hdmi_ prefix.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: add OMAP5 DSIPHY lane-enable support

We are missing OMAP5 DSIPHY lane-enable support, which has prevented
OMAP5 DSI working in mainline. This patch adds the lane-enable similarly
to the recently added OMAP4 version.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/omap: use regmap_update_bit() when muxing DSI pads

Use regmap_update_bits instead of regmap_read/write, which simplifies
the code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/nouveau: Fix merge commit

The most recent merge commit in airlied/drm-next has problems with
confusing old_crtc_state and new_crtc_state. Use the
for_each_oldnew_crtc_in_state macros to clean up the confusion,
and explicitly look at the correct state instead of looking at
asyh->state.

With these fixes it becomes more obvious what the code is trying to do,
which will hopefully prevent future confusion.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/amdgpu/gfx7: fix function name

Was using the wrong prefix (gmc rather than gfx).  The function
is related to the gfx hw, not gmc.  This also makes it consistent
with the naming in gfx8.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Disabling Power Gating for Stoney platform

Power Gating is disabled in Stoney platform.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Added a quirk for Stoney platform

Added DW_I2S_QUIRK_16BIT_IDX_OVERRIDE quirk for Stoney.

Supported format and bus width for I2S controller read
from I2S Component Parameter registers.
These are ready only registers.

For Stoney, I2S Component Parameter registers are programmed
to support 32 bit format and 4 bytes bus width only.

By setting this quirk,It will override 32 bit format with
16 bit format and 2 bytes as bus width for Stoney.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: jt_size was wrongly counted twice

Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix missing endian-safe guard

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: ignore digest_size when loading sdma fw for raven

digest_size has been retired from sdma v4 fw

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind()

My static checker complains that it's possible for "r" to be
uninitialized.  It used to be set to zero so this returns it to the old
behavior.

Fixes: 98a7f88ce9a9 ("drm/amdgpu: bind BOs with GTT space allocated directly v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix coding style in hwmgr.c

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine dmesg info under powerplay.

Use pr_debug to prevent spamming unimportant dmesg.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't finish the ring if not initialized

If a ring is not initialized, it also should not be finished.
For example, in Vega10's SR-IOV environment, UVD's decode ring is not
initialized, but will be finnished in amdgpu_uvd_sw_fini, because UVD
driver put all the uvd decode ring's finish operation into
amdgpu_uvd_sw_fini function, while not uvd_vXXX_0_sw_fini. This will
lead to amdgpu module unloading failure.

Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix preferred typo

Change "prefered" to "preferred"

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix preferred typo

Change "prefered" to "preferred"

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix stolen typo

Change "stollen" to "stolen"

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix stolen typo

Change "stollen" to "stolen"

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c

delete unneeded semicolon.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set gfx_v9_0_ip_funcs as static

We won't use this member in other files, so set it static.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: switch to drm_*{get,put} helpers

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() adn should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to drm_*{get,put} helpers

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add CZ profile support

Support the profiling modes for sclk.

v2: delete profileing mode for mclk.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Tested-and-Reviewed-by Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix PSI not enabled by kmd

cherry-pick from windows driver.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix set highest mclk level failed on Vega10

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix force dpm level failed on CZ

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use 256 bit buffers for all wb allocations (v2)

May waste a bit of memory, but simplifies the interface
significantly.

v2: convert internal accounting to use 256bit slots

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Make amdgpu_atif_handler static

There are no external users of function amdgpu_atif_handler so it can
be static.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Make radeon_atif_handler static

There are no external users of function radeon_atif_handler so it can
be static.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix amdgpu_pm_acpi_event_handler warning

Include a missing header to get rid of the following warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:65:6: warning: no previous prototype for ‘amdgpu_pm_acpi_event_handler’ [-Wmissing-prototypes]
 void amdgpu_pm_acpi_event_handler(struct amdgpu_device *adev)
      ^

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix dce_v6_0_disable_dce warning

Include a missing header to get rid of the following warning:

drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:521:6: warning: no previous prototype for 'dce_v6_0_disable_dce' [-Wmissing-prototypes]
 void dce_v6_0_disable_dce(struct amdgpu_device *adev)
      ^

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix undue fallthroughs in golden registers initialization

As I was staring at the si_init_golden_registers code, I noticed that
the Pitcairn initialization silently falls through the Cape Verde
initialization, and the Oland initialization falls through the Hainan
initialization. However there is no comment stating that this is
intentional, and the radeon driver doesn't have any such fallthrough,
so I suspect this is not supposed to happen.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Marek Olšák" <maraeo@gmail.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/sdma4: move wptr polling setup

Move it up before ring enablement with all of the other
engine setup and explicitly disable it for bare metal.

Cc: Frank Min <Frank.Min@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma4: drop allocation of poll_mem_offs

We already allocate this as part of the ring structure,
use that instead.

Cc: Frank Min <Frank.Min@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma4: drop hdp flush from wptr shadow update

The wb buffer is in system memory, not vram so the flush
is useless.

Cc: Frank Min <Frank.Min@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma4: set wptr shadow atomically (v2)

No functional change until wptr polling uses this
location (future patch).

v2: use WRITE_ONCE

Cc: Frank Min <Frank.Min@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>