Michael Ellerman [Sun, 13 Oct 2019 10:23:51 +0000 (21:23 +1100)]
powerpc/pseries: Mark accumulate_stolen_time() as notrace
[ Upstream commit
eb8e20f89093b64f48975c74ccb114e6775cee22 ]
accumulate_stolen_time() is called prior to interrupt state being
reconciled, which can trip the warning in arch_local_irq_restore():
WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
...
NIP .arch_local_irq_restore+0x9c/0x130
LR .rb_start_commit+0x38/0x80
Call Trace:
.ring_buffer_lock_reserve+0xe4/0x620
.trace_function+0x44/0x210
.function_trace_call+0x148/0x170
.ftrace_ops_no_ops+0x180/0x1d0
ftrace_call+0x4/0x8
.accumulate_stolen_time+0x1c/0xb0
decrementer_common+0x124/0x160
For now just mark it as notrace. We may change the ordering to call it
after interrupt state has been reconciled, but that is a larger
change.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiang Chen [Thu, 24 Oct 2019 14:08:11 +0000 (22:08 +0800)]
scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()
[ Upstream commit
550c0d89d52d3bec5c299f69b4ed5d2ee6b8a9a6 ]
For IOs from upper layer, preemption may be disabled as it may be called by
function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables
preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function
hisi_sas_task_exec(), it may disable preempt twice after down() and up()
which will cause following call trace:
BUG: scheduling while atomic: fio/60373/0x00000002
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xa0/0xc4
__schedule_bug+0x68/0x88
__schedule+0x4b8/0x548
schedule+0x40/0xd0
schedule_timeout+0x200/0x378
__down+0x78/0xc8
down+0x54/0x70
hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main]
hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
sas_queuecommand+0x168/0x1b0 [libsas]
scsi_queue_rq+0x2ac/0x980
blk_mq_dispatch_rq_list+0xb0/0x550
blk_mq_do_dispatch_sched+0x6c/0x110
blk_mq_sched_dispatch_requests+0x114/0x1d8
__blk_mq_run_hw_queue+0xb8/0x130
__blk_mq_delay_run_hw_queue+0x1c0/0x220
blk_mq_run_hw_queue+0xb0/0x128
blk_mq_sched_insert_requests+0xdc/0x208
blk_mq_flush_plug_list+0x1b4/0x3a0
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x3c/0x50
blkdev_direct_IO+0x404/0x550
generic_file_read_iter+0x9c/0x848
blkdev_read_iter+0x50/0x78
aio_read+0xc8/0x170
io_submit_one+0x1fc/0x8d8
__arm64_sys_io_submit+0xdc/0x280
el0_svc_common.constprop.0+0xe0/0x1e0
el0_svc_handler+0x34/0x90
el0_svc+0x10/0x14
...
To solve the issue, check preemptible() to avoid disabling preempt multiple
when flag HISI_SAS_REJECT_CMD_BIT is set.
Link: https://lore.kernel.org/r/1571926105-74636-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Sat, 19 Oct 2019 08:59:13 +0000 (11:59 +0300)]
scsi: csiostor: Don't enable IRQs too early
[ Upstream commit
d6c9b31ac3064fbedf8961f120a4c117daa59932 ]
These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.
Fixes:
a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Fri, 18 Oct 2019 21:18:20 +0000 (14:18 -0700)]
scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices
[ Upstream commit
feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]
When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.
Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.
Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Disseldorp [Thu, 12 Sep 2019 09:55:45 +0000 (11:55 +0200)]
scsi: target: compare full CHAP_A Algorithm strings
[ Upstream commit
9cef2a7955f2754257a7cddedec16edae7b587d0 ]
RFC 2307 states:
For CHAP [RFC1994], in the first step, the initiator MUST send:
CHAP_A=<A1,A2...>
Where A1,A2... are proposed algorithms, in order of preference.
...
For the Algorithm, as stated in [RFC1994], one value is required to
be implemented:
5 (CHAP with MD5)
LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Graumann [Tue, 15 Oct 2019 14:48:24 +0000 (20:18 +0530)]
dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset
[ Upstream commit
8a631a5a0f7d4a4a24dba8587d5d9152be0871cc ]
Whenever we reset the channel, we need to clear desc_pendingcount
along with desc_submitcount. Otherwise when a new transaction is
submitted, the irq coalesce level could be programmed to an incorrect
value in the axidma case.
This behavior can be observed when terminating pending transactions
with xilinx_dma_terminate_all() and then submitting new transactions
without releasing and requesting the channel.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Wed, 16 Oct 2019 11:50:26 +0000 (13:50 +0200)]
iommu/tegra-smmu: Fix page tables in > 4 GiB memory
[ Upstream commit
96d3ab802e4930a29a33934373157d6dff1b2c7e ]
Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.
Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Wed, 2 Oct 2019 17:29:23 +0000 (14:29 -0300)]
iommu: rockchip: Free domain on .domain_free
[ Upstream commit
42bb97b80f2e3bf592e3e99d109b67309aa1b30e ]
IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.
Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Fri, 27 Sep 2019 10:01:35 +0000 (18:01 +0800)]
f2fs: fix to update time in lazytime mode
[ Upstream commit
fe1897eaa6646f5a64a4cee0e6473ed9887d324b ]
generic/018 reports an inconsistent status of atime, the
testcase is as below:
- open file with O_SYNC
- write file to construct fraged space
- calc md5 of file
- record {a,c,m}time
- defrag file --- do nothing
- umount & mount
- check {a,c,m}time
The root cause is, as f2fs enables lazytime by default, atime
update will dirty vfs inode, rather than dirtying f2fs inode (by set
with FI_DIRTY_INODE), so later f2fs_write_inode() called from VFS will
fail to update inode page due to our skip:
f2fs_write_inode()
if (is_inode_flag_set(inode, FI_DIRTY_INODE))
return 0;
So eventually, after evict(), we lose last atime for ever.
To fix this issue, we need to check whether {a,c,m,cr}time is
consistent in between inode cache and inode page, and only skip
f2fs_update_inode() if f2fs inode is not dirty and time is
consistent as well.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Green [Wed, 2 Oct 2019 21:00:21 +0000 (14:00 -0700)]
Input: atmel_mxt_ts - disable IRQ across suspend
[ Upstream commit
463fa44eec2fef50d111ed0199cf593235065c04 ]
Across suspend and resume, we are seeing error messages like the following:
atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)
This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.
Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Sep 2019 03:58:53 +0000 (20:58 -0700)]
scsi: lpfc: Fix locking on mailbox command completion
[ Upstream commit
07b8582430370097238b589f4e24da7613ca6dd3 ]
Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:
The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.
The mailbox response data is only copied if there is a valid port-wide
pointer.
In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion. The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer. The completion path had cleared the active flag under lock, but
had not touched the port pointer. The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.
Fix by making the calls that clear mbox state/port pointer while under
lock. Also slightly cleaned up the error path.
Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sreekanth Reddy [Fri, 13 Sep 2019 13:04:40 +0000 (09:04 -0400)]
scsi: mpt3sas: Fix clear pending bit in ioctl status
[ Upstream commit
782b281883caf70289ba6a186af29441a117d23e ]
When user issues diag register command from application with required size,
and if driver unable to allocate the memory, then it will fail the register
command. While failing the register command, driver is not currently
clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set
before trying to allocate the memory. As this bit is set, subsequent
register command will be failed with BUSY status even when user wants to
register the trace buffer will less memory.
Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag
register command with no memory status.
Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Sep 2019 03:58:55 +0000 (20:58 -0700)]
scsi: lpfc: Fix discovery failures when target device connectivity bounces
[ Upstream commit
3f97aed6117c7677eb16756c4ec8b86000fd5822 ]
An issue was seen discovering all SCSI Luns when a target device undergoes
link bounce.
The driver currently does not qualify the FC4 support on the target.
Therefore it will send a SCSI PRLI and an NVMe PRLI. The expectation is
that the target will reject the PRLI if it is not supported. If a PRLI
times out, the driver will retry. The driver will not proceed with the
device until both SCSI and NVMe PRLIs are resolved. In the failure case,
the device is FCP only and does not respond to the NVMe PRLI, thus
initiating the wait/retry loop in the driver. During that time, a RSCN is
received (device bounced) causing the driver to issue a GID_FT. The GID_FT
response comes back before the PRLI mess is resolved and it prematurely
cancels the PRLI retry logic and leaves the device in a STE_PRLI_ISSUE
state. Discovery with the target never completes or resets.
Fix by resetting the node state back to STE_NPR_NODE when GID_FT completes,
thereby restarting the discovery process for the node.
Link: https://lore.kernel.org/r/20190922035906.10977-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 31 Dec 2019 15:36:37 +0000 (16:36 +0100)]
Linux 4.19.92
Masami Hiramatsu [Thu, 24 Oct 2019 09:12:54 +0000 (18:12 +0900)]
perf probe: Fix to show function entry line as probe-able
commit
91e2f539eeda26ab00bd03fae8dc434c128c85ed upstream.
Fix die_walk_lines() to list the function entry line correctly. Since
the dwarf_entrypc() does not return the entry pc if the DIE has only
range attribute, __die_walk_funclines() fails to list the declaration
line (entry line) in that case.
To solve this issue, this introduces die_entrypc() which correctly
returns the entry PC (the first address range) even if the DIE has only
range attribute. With this fix die_walk_lines() shows the function entry
line is able to probe correctly.
Fixes:
4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Christie [Sun, 8 Dec 2019 22:51:50 +0000 (16:51 -0600)]
nbd: fix shutdown and recv work deadlock v2
commit
1c05839aa973cfae8c3db964a21f9c0eef8fcc21 upstream.
This fixes a regression added with:
commit
e9e006f5fcf2bab59149cb38a48a4817c1b538b4
Author: Mike Christie <mchristi@redhat.com>
Date: Sun Aug 4 14:10:06 2019 -0500
nbd: fix max number of supported devs
where we can deadlock during device shutdown. The problem occurs if
the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has
returned and the userspace app has droppped its reference via closing
the device and running nbd_release. The recv_work nbd_config_put call
would then drop the refcount to zero and try to destroy the config which
would try to do destroy_workqueue from the recv work.
This patch just has nbd_start_device_ioctl do a flush_workqueue when it
wakes so we know after the ioctl returns running works have exited. This
also fixes a possible race where we could try to reuse the device while
old recv_works are still running.
Cc: stable@vger.kernel.org
Fixes:
e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Tue, 17 Dec 2019 09:53:49 +0000 (11:53 +0200)]
mmc: sdhci: Add a quirk for broken command queuing
commit
75d27ea1abf7af3cc2cdec3513e74f52191605c8 upstream.
Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.
This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.
Fixes:
8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Tue, 17 Dec 2019 09:53:48 +0000 (11:53 +0200)]
mmc: sdhci: Workaround broken command queuing on Intel GLK
commit
bedf9fc01ff1f40cfd1a79ccacedd9f3cd8e652a upstream.
Command queuing has been reported broken on some Lenovo systems based on
Intel GLK. This is likely a BIOS issue, so disable command queuing for
Intel GLK if the BIOS vendor string is "LENOVO".
Fixes:
8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yangbo Lu [Mon, 16 Dec 2019 03:18:42 +0000 (11:18 +0800)]
mmc: sdhci-of-esdhc: fix P2020 errata handling
commit
fe0acab448f68c3146235afe03fb932e242ec94c upstream.
Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
This patch is to fix them.
host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
Fixes:
05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes:
a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Faiz Abbas [Fri, 6 Dec 2019 11:43:26 +0000 (17:13 +0530)]
mmc: sdhci: Update the tuning failed messages to pr_debug level
commit
2c92dd20304f505b6ef43d206fff21bda8f1f0ae upstream.
Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit
4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.
Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Villemoes [Wed, 4 Dec 2019 08:54:46 +0000 (09:54 +0100)]
mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"
commit
8b6dc6b2d60221e90703babbc141f063b8a07e72 upstream.
This reverts commit
5dd195522562542bc6ebe6e7bd47890d8b7ca93c.
First, the fix seems to be plain wrong, since the erratum suggests
waiting 5ms before setting setting SYSCTL[RSTD], but this msleep()
happens after the call of sdhci_reset() which is where that bit gets
set (if SDHCI_RESET_DATA is in mask).
Second, walking the whole device tree to figure out if some node has a
"fsl,p2020-esdhc" compatible string is hugely expensive - about 70 to
100 us on our mpc8309 board. Walking the device tree is done under a
raw_spin_lock, so this is obviously really bad on an -rt system, and a
waste of time on all.
In fact, since esdhc_reset() seems to get called around 100 times per
second, that mpc8309 now spends 0.8% of its time determining that
it is not a p2020. Whether those 100 calls/s are normal or due to some
other bug or misconfiguration, regularly hitting a 100 us
non-preemptible window is unacceptable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191204085447.27491-1-linux@rasmusvillemoes.dk
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Veerabhadrarao Badiganti [Tue, 26 Nov 2019 10:19:16 +0000 (10:19 +0000)]
mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
commit
fa56ac9792265354b565f28def7164e7d7db2b1e upstream.
The DDR_CONFIG register offset got updated after a specific
minor version of sdcc V4. This offset change has not been properly
taken care of while updating register changes for sdcc V5.
Correcting proper offset for this register.
Also updating this register value to reflect the recommended RCLK
delay.
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ea738ec72-fa0f852d-20f8-474a-80b2-4b0ef63b132c-000000@us-west-2.amazonses.com
Fixes:
f15358885dda ("mmc: sdhci-msm: Define new Register address map")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 9 Dec 2019 06:19:08 +0000 (06:19 +0000)]
powerpc/irq: fix stack overflow verification
commit
099bc4812f09155da77eeb960a983470249c9ce1 upstream.
Before commit
0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.
Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.
Fixes:
0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srikar Dronamraju [Thu, 5 Dec 2019 08:32:17 +0000 (14:02 +0530)]
powerpc/vcpu: Assume dedicated processors as non-preempt
commit
14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.
With commit
247f2f6f3c70 ("sched/core: Don't schedule threads on
pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule
tasks on wakeup. This leads to wrong choice of CPU, which in-turn
leads to larger wakeup latencies. Eventually, it leads to performance
regression in latency sensitive benchmarks like soltp, schbench etc.
On Powerpc, vcpu_is_preempted() only looks at yield_count. If the
yield_count is odd, the vCPU is assumed to be preempted. However
yield_count is increased whenever the LPAR enters CEDE state (idle).
So any CPU that has entered CEDE state is assumed to be preempted.
Even if vCPU of dedicated LPAR is preempted/donated, it should have
right of first-use since they are supposed to own the vCPU.
On a Power9 System with 32 cores:
# lscpu
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 8
Core(s) per socket: 1
Socket(s): 16
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-63
NUMA node1 CPU(s): 64-127
# perf stat -a -r 5 ./schbench
v5.4 v5.4 + patch
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 45
75.0000th: 62 75.0th: 63
90.0000th: 71 90.0th: 74
95.0000th: 77 95.0th: 78
*99.0000th: 91 *99.0th: 82
99.5000th: 707 99.5th: 83
99.9000th: 6920 99.9th: 86
min=0, max=10048 min=0, max=96
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 46
75.0000th: 61 75.0th: 64
90.0000th: 72 90.0th: 75
95.0000th: 79 95.0th: 79
*99.0000th: 691 *99.0th: 83
99.5000th: 3972 99.5th: 85
99.9000th: 8368 99.9th: 91
min=0, max=16606 min=0, max=117
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 46
75.0000th: 61 75.0th: 64
90.0000th: 71 90.0th: 75
95.0000th: 77 95.0th: 79
*99.0000th: 106 *99.0th: 83
99.5000th: 2364 99.5th: 84
99.9000th: 7480 99.9th: 90
min=0, max=10001 min=0, max=95
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 47
75.0000th: 62 75.0th: 65
90.0000th: 72 90.0th: 75
95.0000th: 78 95.0th: 79
*99.0000th: 93 *99.0th: 84
99.5000th: 108 99.5th: 85
99.9000th: 6792 99.9th: 90
min=0, max=17681 min=0, max=117
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 46 50.0th: 45
75.0000th: 62 75.0th: 64
90.0000th: 73 90.0th: 75
95.0000th: 79 95.0th: 79
*99.0000th: 113 *99.0th: 82
99.5000th: 2724 99.5th: 83
99.9000th: 6184 99.9th: 93
min=0, max=9887 min=0, max=111
Performance counter stats for 'system wide' (5 runs):
context-switches 43,373 ( +- 0.40% ) 44,597 ( +- 0.55% )
cpu-migrations 1,211 ( +- 5.04% ) 220 ( +- 6.23% )
page-faults 15,983 ( +- 5.21% ) 15,360 ( +- 3.38% )
Waiman Long suggested using static_keys.
Fixes:
247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Parth Shah <parth@linux.ibm.com>
Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Tested-by: Parth Shah <parth@linux.ibm.com>
[mpe: Move the key and setting of the key to pseries/setup.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yazen Ghannam [Thu, 21 Nov 2019 14:15:08 +0000 (08:15 -0600)]
x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[]
commit
966af20929ac24360ba3fac5533eb2ab003747da upstream.
Each logical CPU in Scalable MCA systems controls a unique set of MCA
banks in the system. These banks are not shared between CPUs. The bank
types and ordering will be the same across CPUs on currently available
systems.
However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while
other CPUs do not. In this case, the bank seen as Reserved on one CPU is
assumed to be the same type as the bank seen as a known type on another
CPU.
In general, this occurs when the hardware represented by the MCA bank
is disabled, e.g. disabled memory controllers on certain models, etc.
The MCA bank is disabled in the hardware, so there is no possibility of
getting an MCA/MCE from it even if it is assumed to have a known type.
For example:
Full system:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | UMC | UMC
2 | CS | CS
System with hardware disabled:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | UMC | RAZ
2 | CS | CS
For this reason, there is a single, global struct smca_banks[] that is
initialized at boot time. This array is initialized on each CPU as it
comes online. However, the array will not be updated if an entry already
exists.
This works as expected when the first CPU (usually CPU0) has all
possible MCA banks enabled. But if the first CPU has a subset, then it
will save a "Reserved" type in smca_banks[]. Successive CPUs will then
not be able to update smca_banks[] even if they encounter a known bank
type.
This may result in unexpected behavior. Depending on the system
configuration, a user may observe issues enumerating the MCA
thresholding sysfs interface. The issues may be as trivial as sysfs
entries not being available, or as severe as system hangs.
For example:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | RAZ | UMC
2 | CS | CS
Extend the smca_banks[] entry check to return if the entry is a
non-reserved type. Otherwise, continue so that CPUs that encounter a
known bank type can update smca_banks[].
Fixes:
68627a697c19 ("x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191121141508.141273-1-Yazen.Ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Khlebnikov [Thu, 31 Oct 2019 13:04:48 +0000 (16:04 +0300)]
x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()
commit
246ff09f89e54fdf740a8d496176c86743db3ec7 upstream.
... because interrupts are disabled that early and sending IPIs can
deadlock:
BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
no locks held by swapper/1/0.
irq event stamp: 0
hardirqs last enabled at (0): [<
0000000000000000>] 0x0
hardirqs last disabled at (0): [<
ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
softirqs last enabled at (0): [<
ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
softirqs last disabled at (0): [<
0000000000000000>] 0x0
Preemption disabled at:
[<
ffffffff8104703b>] start_secondary+0x3b/0x190
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.5.0-rc2+ #1
Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
Call Trace:
dump_stack
___might_sleep.cold.92
wait_for_completion
? generic_exec_single
rdmsr_safe_on_cpu
? wrmsr_on_cpus
mce_amd_feature_init
mcheck_cpu_init
identify_cpu
identify_secondary_cpu
smp_store_cpu_info
start_secondary
secondary_startup_64
The function smca_configure() is called only on the current CPU anyway,
therefore replace rdmsr_safe_on_cpu() with atomic rdmsr_safe() and avoid
the IPI.
[ bp: Update commit message. ]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/157252708836.3876.4604398213417262402.stgit@buzz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 12 Dec 2019 09:40:49 +0000 (09:40 +0000)]
KVM: arm64: Ensure 'params' is initialised when looking up sys register
commit
1ce74e96c2407df2b5867e5d45a70aacb8923c14 upstream.
Commit
4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
introduced 'find_reg_by_id()', which looks up a system register only if
the 'id' index parameter identifies a valid system register. As part of
the patch, existing callers of 'find_reg()' were ported over to the new
interface, but this breaks 'index_to_sys_reg_desc()' in the case that the
initial lookup in the vCPU target table fails because we will then call
into 'find_reg()' for the system register table with an uninitialised
'param' as the key to the lookup.
GCC 10 is bright enough to spot this (amongst a tonne of false positives,
but hey!):
| arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’:
| arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized]
| 983 | (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2);
| [...]
Revert the hunk of
4b927b94d5df which breaks 'index_to_sys_reg_desc()' so
that the old behaviour of checking the index upfront is restored.
Fixes:
4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212094049.12437-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 13 Dec 2019 18:50:11 +0000 (21:50 +0300)]
ext4: unlock on error in ext4_expand_extra_isize()
commit
7f420d64a08c1dcd65b27be82a27cf2bdb2e7847 upstream.
We need to unlock the xattr before returning on this error path.
Cc: stable@kernel.org # 4.13
Fixes:
c03b45b853f5 ("ext4, project: expand inode extra size if possible")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191213185010.6k7yl2tck3wlsdkt@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 2 Dec 2019 17:02:13 +0000 (18:02 +0100)]
ext4: check for directory entries too close to block end
commit
109ba779d6cca2d519c5dd624a3276d03e21948e upstream.
ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 2 Dec 2019 17:02:12 +0000 (18:02 +0100)]
ext4: fix ext4_empty_dir() for directories with holes
commit
64d4ce892383b2ad6d782e080d25502f91bf2a38 upstream.
Function ext4_empty_dir() doesn't correctly handle directories with
holes and crashes on bh->b_data dereference when bh is NULL. Reorganize
the loop to use 'offset' variable all the times instead of comparing
pointers to current direntry with bh->b_data pointer. Also add more
strict checking of '.' and '..' directory entries to avoid entering loop
in possibly invalid state on corrupted filesystems.
References: CVE-2019-19037
CC: stable@vger.kernel.org
Fixes:
4e19d6b65fb4 ("ext4: allow directory holes")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 16 Dec 2019 11:08:23 +0000 (11:08 +0000)]
staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value
commit
ab42b48f32d4c766420c3499ee9c0289b7028182 upstream.
The "auto-attach" handler function `gsc_hpdi_auto_attach()` calls
`dma_alloc_coherent()` in a loop to allocate some DMA data buffers, and
also calls it to allocate a buffer for a DMA descriptor chain. However,
it does not check the return value of any of these calls. Change
`gsc_hpdi_auto_attach()` to return `-ENOMEM` if any of these
`dma_alloc_coherent()` calls fail. This will result in the comedi core
calling the "detach" handler `gsc_hpdi_detach()` as part of the
clean-up, which will call `gsc_hpdi_free_dma()` to free any allocated
DMA coherent memory buffers.
Cc: <stable@vger.kernel.org> #4.6+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191216110823.216237-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 17 Dec 2019 19:06:04 +0000 (20:06 +0100)]
platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes
commit
133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.
At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):
Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5
We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.
This commits bumps the buffer size, fixing the error.
Fixes:
8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Dec 2019 11:55:25 +0000 (13:55 +0200)]
intel_th: pci: Add Elkhart Lake SOC support
commit
88385866bab8d5e18c7f45d1023052c783572e03 upstream.
This adds support for Intel Trace Hub in Elkhart Lake.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217115527.74383-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Dec 2019 11:55:24 +0000 (13:55 +0200)]
intel_th: pci: Add Comet Lake PCH-V support
commit
e4de2a5d51f97a6e720a1c0911f93e2d8c2f1c08 upstream.
This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erkka Talvitie [Wed, 11 Dec 2019 08:08:39 +0000 (10:08 +0200)]
USB: EHCI: Do not return -EPIPE when hub is disconnected
commit
64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream.
When disconnecting a USB hub that has some child device(s) connected to it
(such as a USB mouse), then the stack tries to clear halt and
reset device(s) which are _already_ physically disconnected.
The issue has been reproduced with:
CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE.
SW: U-Boot 2019.07 and kernel 4.19.40.
CPU: HP Proliant Microserver Gen8.
SW: Linux version 4.2.3-300.fc23.x86_64
In this situation there will be error bit for MMF active yet the
CERR equals EHCI_TUNE_CERR + halt. Existing implementation
interprets this as a stall [1] (chapter 8.4.5).
The possible conditions when the MMF will be active + halt
can be found from [2] (Table 4-13).
Fix for the issue is to check whether MMF is active and PID Code is
IN before checking for the stall. If these conditions are true then
it is not a stall.
What happens after the fix is that when disconnecting a hub with
attached device(s) the situation is not interpret as a stall.
[1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf]
[2] [https://www.intel.com/content/dam/www/public/us/en/documents/
technical-specifications/ehci-specification-for-usb.pdf]
Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Wed, 11 Dec 2019 10:28:41 +0000 (11:28 +0100)]
cpufreq: Avoid leaving stale IRQ work items during CPU offline
commit
85572c2c4a45a541e880e087b5b17a48198b2416 upstream.
The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.
Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.
If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point. Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever. In particular, a system-wide
deadlock may occur during CPU online as a result of that.
The failing scenario is as follows. CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu). It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline. The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above. Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3. When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.
To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.
Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.
Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.
Fixes:
99d14d0e16fa ("cpufreq: Process remote callbacks from any CPU if the platform permits")
Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/
Reported-by: Anson Huang <anson.huang@nxp.com>
Tested-by: Anson Huang <anson.huang@nxp.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suwan Kim [Fri, 13 Dec 2019 02:30:55 +0000 (11:30 +0900)]
usbip: Fix error path of vhci_recv_ret_submit()
commit
aabb5b833872524eaf28f52187e5987984982264 upstream.
If a transaction error happens in vhci_recv_ret_submit(), event
handler closes connection and changes port status to kick hub_event.
Then hub tries to flush the endpoint URBs, but that causes infinite
loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because
"vhci_priv" in vhci_urb_dequeue() was already released by
vhci_recv_ret_submit() before a transmission error occurred. Thus,
vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint()
continuously calls vhci_urb_dequeue().
The root cause of this issue is that vhci_recv_ret_submit()
terminates early without giving back URB when transaction error
occurs in vhci_recv_ret_submit(). That causes the error URB to still
be linked at endpoint list without “vhci_priv".
So, in the case of transaction error in vhci_recv_ret_submit(),
unlink URB from the endpoint, insert proper error code in
urb->status and give back URB.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suwan Kim [Fri, 13 Dec 2019 02:30:54 +0000 (11:30 +0900)]
usbip: Fix receive error in vhci-hcd when using scatter-gather
commit
d986294ee55d719562b20aabe15a39bf8f863415 upstream.
When vhci uses SG and receives data whose size is smaller than SG
buffer size, it tries to receive more data even if it acutally
receives all the data from the server. If then, it erroneously adds
error event and triggers connection shutdown.
vhci-hcd should check if it received all the data even if there are
more SG entries left. So, check if it receivces all the data from
the server in for_each_sg() loop.
Fixes:
ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213023055.19933-2-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 3 Dec 2019 11:24:58 +0000 (14:24 +0300)]
btrfs: return error pointer from alloc_test_extent_buffer
[ Upstream commit
b6293c821ea8fa2a631a2112cd86cd435effeb8b ]
Callers of alloc_test_extent_buffer have not correctly interpreted the
return value as error pointer, as alloc_test_extent_buffer should behave
as alloc_extent_buffer. The self-tests were unaffected but
btrfs_find_create_tree_block could call both functions and that would
cause problems up in the call chain.
Fixes:
faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Mon, 9 Dec 2019 08:03:12 +0000 (09:03 +0100)]
s390/ftrace: fix endless recursion in function_graph tracer
[ Upstream commit
6feeee8efc53035c3195b02068b58ae947538aa4 ]
The following sequence triggers a kernel stack overflow on s390x:
mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
echo function_graph > current_tracer
[crash]
This is because preempt_count_{add,sub} are in the list of traced
functions, which can be demonstrated by:
echo preempt_count_add >set_ftrace_filter
echo function_graph > current_tracer
[crash]
The stack overflow happens because get_tod_clock_monotonic() gets called
by ftrace but itself calls preempt_{disable,enable}(), which leads to a
endless recursion. Fix this by using preempt_{disable,enable}_notrace().
Fixes:
011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 3 Oct 2019 21:52:27 +0000 (22:52 +0100)]
drm/amdgpu: fix uninitialized variable pasid_mapping_needed
[ Upstream commit
17cf678a33c6196a3df4531fe5aec91384c9eeb5 ]
The boolean variable pasid_mapping_needed is not initialized and
there are code paths that do not assign it any value before it is
is read later. Fix this by initializing pasid_mapping_needed to
false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes:
6817bf283b2b ("drm/amdgpu: grab the id mgr lock while accessing passid_mapping")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Wed, 18 Dec 2019 01:19:11 +0000 (17:19 -0800)]
usb: xhci: Fix build warning seen with CONFIG_PM=n
[ Upstream commit
6056a0f8ede27b296d10ef46f7f677cc9d715371 ]
The following build warning is seen if CONFIG_PM is disabled.
drivers/usb/host/xhci-pci.c:498:13: warning:
unused function 'xhci_pci_shutdown'
Fixes:
f2c710f7dca8 ("usb: xhci: only set D3hot for pci device")
Cc: Henry Lin <henryl@nvidia.com>
Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaolong Huang [Sat, 7 Dec 2019 14:40:24 +0000 (22:40 +0800)]
can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices
commit
da2311a6385c3b499da2ed5d9be59ce331fa93e9 upstream.
Uninitialized Kernel memory can leak to USB devices.
Fix this by using kzalloc() instead of kmalloc().
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Fixes:
7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Cc: linux-stable <stable@vger.kernel.org> # >= v4.19
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaotian Jing [Wed, 4 Dec 2019 07:19:58 +0000 (15:19 +0800)]
mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
commit
8f34e5bd7024d1ffebddd82d7318b1be17be9e9a upstream.
there is a chance that always get response CRC error after HS200 tuning,
the reason is that need set CMD_TA to 2. this modification is only for
MT8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: stable@vger.kernel.org
Fixes:
1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune")
Link: https://lore.kernel.org/r/20191204071958.18553-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Faiz Abbas [Thu, 28 Nov 2019 11:04:22 +0000 (16:34 +0530)]
Revert "mmc: sdhci: Fix incorrect switch to HS mode"
commit
07bcc411567cb96f9d1fc84fff8d387118a2920d upstream.
This reverts commit
c894e33ddc1910e14d6f2a2016f60ab613fd8b37.
This commit aims to treat SD High speed and SDR25 as the same while
setting UHS Timings in HOST_CONTROL2 which leads to failures with some
SD cards in AM65x. Revert this commit.
The issue this commit was trying to fix can be implemented in a platform
specific callback instead of common sdhci code.
Cc: <stable@vger.kernel.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Mon, 16 Sep 2019 18:30:56 +0000 (11:30 -0700)]
btrfs: don't prematurely free work in scrub_missing_raid56_worker()
[ Upstream commit
57d4f0b863272ba04ba85f86bfdc0f976f0af91c ]
Currently, scrub_missing_raid56_worker() puts and potentially frees
sblock (which embeds the work item) and then submits a bio through
scrub_wr_submit(). This is another potential instance of the bug in
"btrfs: don't prematurely free work in run_ordered_work()". Fix it by
dropping the reference after we submit the bio.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Omar Sandoval [Mon, 16 Sep 2019 18:30:55 +0000 (11:30 -0700)]
btrfs: don't prematurely free work in reada_start_machine_worker()
[ Upstream commit
e732fe95e4cad35fc1df278c23a32903341b08b3 ]
Currently, reada_start_machine_worker() frees the reada_machine_work and
then calls __reada_start_machine() to do readahead. This is another
potential instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
There _might_ already be a deadlock here: reada_start_machine_worker()
can depend on itself through stacked filesystems (__read_start_machine()
-> reada_start_machine_dev() -> reada_tree_block_flagged() ->
read_extent_buffer_pages() -> submit_one_bio() ->
btree_submit_bio_hook() -> btrfs_map_bio() -> submit_stripe_bio() ->
submit_bio() onto a loop device can trigger readahead on the lower
filesystem).
Either way, let's fix it by freeing the work at the end.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Fri, 22 Nov 2019 15:23:23 +0000 (15:23 +0000)]
net: phy: initialise phydev speed and duplex sanely
[ Upstream commit
a5d66f810061e2dd70fb7a108dcd14e535bc639f ]
When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.
There is a window at initialisation time where we may report link
down using the 0/-1 values. Tidy this up and use the predefined
constants, so debug doesn't complain with:
"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"
when the speed and duplex settings are printed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sam Bobroff [Sun, 17 Nov 2019 23:53:54 +0000 (10:53 +1100)]
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
[ Upstream commit
3d0e3ce52ce3eb4b9de3caf9c38dbb5a4d3e13c3 ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes:
27ae10641e9c ("drm/amdgpu: add interupt handler implementation for si v3")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Rapoport [Thu, 21 Nov 2019 16:21:31 +0000 (18:21 +0200)]
mips: fix build when "48 bits virtual memory" is enabled
[ Upstream commit
3ed6751bb8fa89c3014399bb0414348499ee202a ]
With CONFIG_MIPS_VA_BITS_48=y the build fails miserably:
CC arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/pgtable.h:644,
from include/linux/mm.h:99,
from arch/mips/kernel/asm-offsets.c:15:
include/asm-generic/pgtable.h:16:2: error: #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
#error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
^~~~~
include/asm-generic/pgtable.h:390:28: error: unknown type name 'p4d_t'; did you mean 'pmd_t'?
static inline int p4d_same(p4d_t p4d_a, p4d_t p4d_b)
^~~~~
pmd_t
[ ... more such errors ... ]
scripts/Makefile.build:99: recipe for target 'arch/mips/kernel/asm-offsets.s' failed
make[2]: *** [arch/mips/kernel/asm-offsets.s] Error 1
This happens because when CONFIG_MIPS_VA_BITS_48 enables 4th level of the
page tables, but neither pgtable-nop4d.h nor 5level-fixup.h are included to
cope with the 5th level.
Replace #ifdef conditions around includes of the pgtable-nop{m,u}d.h with
explicit CONFIG_PGTABLE_LEVELS and add include of 5level-fixup.h for the
case when CONFIG_PGTABLE_LEVELS==4
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hewenliang [Tue, 19 Nov 2019 01:44:15 +0000 (20:44 -0500)]
libtraceevent: Fix memory leakage in copy_filter_type
[ Upstream commit
10992af6bf46a2048ad964985a5b77464e5563b1 ]
It is necessary to free the memory that we have allocated when error occurs.
Fixes:
ef3072cd1d5c ("tools lib traceevent: Get rid of die in add_filter_type()")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Wed, 20 Nov 2019 11:27:38 +0000 (22:27 +1100)]
crypto: vmx - Avoid weird build failures
[ Upstream commit
4ee812f6143d78d8ba1399671d78c8d78bf2817c ]
In the vmx crypto Makefile we assign to a variable called TARGET and
pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts.
The variable is meant to describe what flavour of powerpc we're
building for, eg. either 32 or 64-bit, and big or little endian.
Unfortunately TARGET is a fairly common name for a make variable, and
if it happens that TARGET is specified as a command line parameter to
make, the value specified on the command line will override our value.
In particular this can happen if the kernel Makefile is driven by an
external Makefile that uses TARGET for something.
This leads to weird build failures, eg:
nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45.
/linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed
Which shows that we passed an empty value for $(TARGET) to the perl
script, confirmed with make V=1:
perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl > drivers/crypto/vmx/ghashp8-ppc.S
We can avoid this confusion by using override, to tell make that we
don't want anything to override our variable, even a value specified
on the command line. We can also use a less common name, given the
script calls it "flavour", let's use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Pedersen [Tue, 19 Nov 2019 05:35:38 +0000 (21:35 -0800)]
mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED
[ Upstream commit
08a5bdde3812993cb8eb7aa9124703df0de28e4b ]
Commit
7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
let STAs send QoS Null frames as PS triggers if the AP was
a QoS STA. However, the mac80211 PS stack relies on an
interface flag IEEE80211_STA_NULLFUNC_ACKED for
determining trigger frame ACK, which was not being set for
acked non-QoS Null frames. The effect is an inability to
trigger hardware sleep via IEEE80211_CONF_PS since the QoS
Null frame was seemingly never acked.
This bug only applies to drivers which set both
IEEE80211_HW_REPORTS_TX_ACK_STATUS and
IEEE80211_HW_PS_NULLFUNC_STACK.
Detect the acked QoS Null frame to restore STA power save.
Fixes:
7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20191119053538.25979-4-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Thu, 14 Nov 2019 10:49:06 +0000 (11:49 +0100)]
crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
[ Upstream commit
a7126603d46fe8f01aeedf589e071c6aaa6c6c39 ]
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings on sun4i-ss-hash.c.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Tue, 12 Nov 2019 02:38:34 +0000 (10:38 +0800)]
crypto: sun4i-ss - Fix 64-bit size_t warnings
[ Upstream commit
d6e9da21ee8246b5e556b3b153401ab045adb986 ]
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Grygorii Strashko [Tue, 19 Nov 2019 22:19:13 +0000 (00:19 +0200)]
net: ethernet: ti: ale: clean ale tbl on init and intf restart
[ Upstream commit
7fe579dfb90fcdf0c7722f33c772d5f0d1bc7cb6 ]
Clean CPSW ALE on init and intf restart (up/down) to avoid reading obsolete
or garbage entries from ALE table.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 20 Nov 2019 09:57:12 +0000 (11:57 +0200)]
fbtft: Make sure string is NULL terminated
[ Upstream commit
21f585480deb4bcf0d92b08879c35d066dfee030 ]
New GCC warns about inappropriate use of strncpy():
drivers/staging/fbtft/fbtft-core.c: In function ‘fbtft_framebuffer_alloc’:
drivers/staging/fbtft/fbtft-core.c:665:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
665 | strncpy(info->fix.id, dev->driver->name, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Later on the copy is being used with the assumption to be NULL terminated.
Make sure string is NULL terminated by switching to snprintf().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120095716.26628-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 5 Nov 2019 13:50:32 +0000 (14:50 +0100)]
iwlwifi: check kasprintf() return value
[ Upstream commit
5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ]
kasprintf() can fail, we should check the return value.
Fixes:
5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger")
Fixes:
8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Mon, 18 Nov 2019 12:38:55 +0000 (13:38 +0100)]
brcmfmac: remove monitor interface when detaching
[ Upstream commit
4f61563da075bc8faefddfd5f8fc0cc14c49650a ]
This fixes a minor WARNING in the cfg80211:
[ 130.658034] ------------[ cut here ]------------
[ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrian Hunter [Fri, 15 Nov 2019 13:54:47 +0000 (15:54 +0200)]
x86/insn: Add some Intel instructions to the opcode map
[ Upstream commit
b980be189c9badba50634671e2303e92bf28e35a ]
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
$ perf test -v "new " 2>&1 | grep -i umonitor
Decoded ok: 67 f3 0f ae f0 umonitor %ax
Decoded ok: f3 0f ae f0 umonitor %eax
Decoded ok: 67 f3 0f ae f0 umonitor %eax
Decoded ok: f3 0f ae f0 umonitor %rax
Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
$ perf test -v "new " 2>&1 | grep -i umwait
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 41 0f ae f0 umwait %r8d
$ perf test -v "new " 2>&1 | grep -i movdiri
Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
$ perf test -v "new " 2>&1 | grep -i movdir64b
Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmd
Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmds
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i encls
Decoded ok: 0f 01 cf encls
Decoded ok: 0f 01 cf encls
$ perf test -v "new " 2>&1 | grep -i enclu
Decoded ok: 0f 01 d7 enclu
Decoded ok: 0f 01 d7 enclu
$ perf test -v "new " 2>&1 | grep -i enclv
Decoded ok: 0f 01 c0 enclv
Decoded ok: 0f 01 c0 enclv
$ perf test -v "new " 2>&1 | grep -i pconfig
Decoded ok: 0f 01 c5 pconfig
Decoded ok: 0f 01 c5 pconfig
$ perf test -v "new " 2>&1 | grep -i wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Tue, 19 Nov 2019 14:51:38 +0000 (15:51 +0100)]
ASoC: Intel: bytcr_rt5640: Update quirk for Acer Switch 10 SW5-012 2-in-1
[ Upstream commit
0bb887709eb16bdc4b5baddd8337abf3de72917f ]
When the Acer Switch 10 SW5-012 quirk was added we did not have
jack-detection support yet; and the builtin microphone selection of
the original quirk is wrong too.
Fix the microphone-input quirk and add jack-detection info so that the
internal-microphone and headphone/set jack on the Switch 10 work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191119145138.59162-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Mon, 18 Nov 2019 07:37:07 +0000 (15:37 +0800)]
ASoC: wm5100: add missed pm_runtime_disable
[ Upstream commit
b1176bbb70866f24099cd2720283c7219fb4a81c ]
The driver forgets to call pm_runtime_disable in remove and
probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191118073707.28298-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Mon, 18 Nov 2019 02:48:48 +0000 (10:48 +0800)]
spi: st-ssc4: add missed pm_runtime_disable
[ Upstream commit
cd050abeba2a95fe5374eec28ad2244617bcbab6 ]
The driver forgets to call pm_runtime_disable in probe failure
and remove.
Add the missed calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118024848.21645-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Mon, 18 Nov 2019 07:36:33 +0000 (15:36 +0800)]
ASoC: wm2200: add missed operations in remove and probe failure
[ Upstream commit
2dab09be49a1e7a4dd13cb47d3a1441a2ef33a87 ]
This driver misses calls to pm_runtime_disable and regulator_bulk_disable
in remove and a call to free_irq in probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118073633.28237-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Omar Sandoval [Mon, 16 Sep 2019 18:30:53 +0000 (11:30 -0700)]
btrfs: don't prematurely free work in run_ordered_work()
[ Upstream commit
c495dcd6fbe1dce51811a76bb85b4675f6494938 ]
We hit the following very strange deadlock on a system with Btrfs on a
loop device backed by another Btrfs filesystem:
1. The top (loop device) filesystem queues an async_cow work item from
cow_file_range_async(). We'll call this work X.
2. Worker thread A starts work X (normal_work_helper()).
3. Worker thread A executes the ordered work for the top filesystem
(run_ordered_work()).
4. Worker thread A finishes the ordered work for work X and frees X
(work->ordered_free()).
5. Worker thread A executes another ordered work and gets blocked on I/O
to the bottom filesystem (still in run_ordered_work()).
6. Meanwhile, the bottom filesystem allocates and queues an async_cow
work item which happens to be the recently-freed X.
7. The workqueue code sees that X is already being executed by worker
thread A, so it schedules X to be executed _after_ worker thread A
finishes (see the find_worker_executing_work() call in
process_one_work()).
Now, the top filesystem is waiting for I/O on the bottom filesystem, but
the bottom filesystem is waiting for the top filesystem to finish, so we
deadlock.
This happens because we are breaking the workqueue assumption that a
work item cannot be recycled while it still depends on other work. Fix
it by waiting to free the work item until we are done with all of the
related ordered work.
P.S.:
One might ask why the workqueue code doesn't try to detect a recycled
work item. It actually does try by checking whether the work item has
the same work function (find_worker_executing_work()), but in our case
the function is the same. This is the only key that the workqueue code
has available to compare, short of adding an additional, layer-violating
"custom key". Considering that we're the only ones that have ever hit
this, we should just play by the rules.
Unfortunately, we haven't been able to create a minimal reproducer other
than our full container setup using a compress-force=zstd filesystem on
top of another compress-force=zstd filesystem.
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Omar Sandoval [Mon, 16 Sep 2019 18:30:54 +0000 (11:30 -0700)]
btrfs: don't prematurely free work in end_workqueue_fn()
[ Upstream commit
9be490f1e15c34193b1aae17da58e14dd9f55a95 ]
Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds
the work item) and then calls bio_endio(). This is another potential
instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
In particular, the endio call may depend on other work items. For
example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() ->
__btrfs_correct_data_nocsum() -> dio_read_error() ->
submit_dio_repair_bio(), which submits a bio that is also completed
through a end_workqueue_fn() work item. However,
__btrfs_correct_data_nocsum() waits for the newly submitted bio to
complete, thus it depends on another work item.
This example currently usually works because we use different workqueue
helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR.
However, it may deadlock with stacked filesystems and is fragile
overall. The proper fix is to free the work item at the very end of the
work function, so let's do that.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eugeniu Rosca [Fri, 15 Nov 2019 13:44:30 +0000 (14:44 +0100)]
mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests
[ Upstream commit
c91843463e9e821dc3b48fe37e3155fa38299f6e ]
Isolated initially to renesas_sdhi_internal_dmac [1], Ulf suggested
adding MMC_CAP_ERASE to the TMIO mmc core:
On Fri, Nov 15, 2019 at 10:27:25AM +0100, Ulf Hansson wrote:
-- snip --
This test and due to the discussions with Wolfram and you in this
thread, I would actually suggest that you enable MMC_CAP_ERASE for all
tmio variants, rather than just for this particular one.
In other words, set the cap in tmio_mmc_host_probe() should be fine,
as it seems none of the tmio variants supports HW busy detection at
this point.
-- snip --
Testing on R-Car H3ULCB-KF doesn't reveal any issues (v5.4-rc7):
root@rcar-gen3:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 59.2G 0 disk <--- eMMC
mmcblk0boot0 179:8 0 4M 1 disk
mmcblk0boot1 179:16 0 4M 1 disk
mmcblk1 179:24 0 30G 0 disk <--- SD card
root@rcar-gen3:~# time blkdiscard /dev/mmcblk0
real 0m8.659s
user 0m0.001s
sys 0m1.920s
root@rcar-gen3:~# time blkdiscard /dev/mmcblk1
real 0m1.176s
user 0m0.001s
sys 0m0.124s
[1] https://lore.kernel.org/linux-renesas-soc/
20191112134808.23546-1-erosca@de.adit-jv.com/
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Originally-by: Harish Jenny K N <harish_kandiga@mentor.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:27 +0000 (18:09 +0100)]
crypto: virtio - deal with unsupported input sizes
[ Upstream commit
19c5da7d4a2662e85ea67d2d81df57e038fde3ab ]
Return -EINVAL for input sizes that are not a multiple of the AES
block size, since they are not supported by our CBC chaining mode.
While at it, remove the pr_err() that reports unsupported key sizes
being used: we shouldn't spam the kernel log with that.
Fixes:
dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petar Penkov [Thu, 14 Nov 2019 17:52:09 +0000 (09:52 -0800)]
tun: fix data-race in gro_normal_list()
[ Upstream commit
c39e342a050a4425348e6fe7f75827c0a1a7ebc5 ]
There is a race in the TUN driver between napi_busy_loop and
napi_gro_frags. This commit resolves the race by adding the NAPI struct
via netif_tx_napi_add, instead of netif_napi_add, which disables polling
for the NAPI struct.
KCSAN reported:
BUG: KCSAN: data-race in gro_normal_list.part.0 / napi_busy_loop
write to 0xffff8880b5d474b0 of 4 bytes by task 11205 on cpu 0:
gro_normal_list.part.0+0x77/0xb0 net/core/dev.c:5682
gro_normal_list net/core/dev.c:5678 [inline]
gro_normal_one net/core/dev.c:5692 [inline]
napi_frags_finish net/core/dev.c:5705 [inline]
napi_gro_frags+0x625/0x770 net/core/dev.c:5778
tun_get_user+0x2150/0x26a0 drivers/net/tun.c:1976
tun_chr_write_iter+0x79/0xd0 drivers/net/tun.c:2022
call_write_iter include/linux/fs.h:1895 [inline]
do_iter_readv_writev+0x487/0x5b0 fs/read_write.c:693
do_iter_write fs/read_write.c:970 [inline]
do_iter_write+0x13b/0x3c0 fs/read_write.c:951
vfs_writev+0x118/0x1c0 fs/read_write.c:1015
do_writev+0xe3/0x250 fs/read_write.c:1058
__do_sys_writev fs/read_write.c:1131 [inline]
__se_sys_writev fs/read_write.c:1128 [inline]
__x64_sys_writev+0x4e/0x60 fs/read_write.c:1128
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8880b5d474b0 of 4 bytes by task 11168 on cpu 1:
gro_normal_list net/core/dev.c:5678 [inline]
napi_busy_loop+0xda/0x4f0 net/core/dev.c:6126
sk_busy_loop include/net/busy_poll.h:108 [inline]
__skb_recv_udp+0x4ad/0x560 net/ipv4/udp.c:1689
udpv6_recvmsg+0x29e/0xe90 net/ipv6/udp.c:288
inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592
sock_recvmsg_nosec net/socket.c:871 [inline]
sock_recvmsg net/socket.c:889 [inline]
sock_recvmsg+0x92/0xb0 net/socket.c:885
sock_read_iter+0x15f/0x1e0 net/socket.c:967
call_read_iter include/linux/fs.h:1889 [inline]
new_sync_read+0x389/0x4f0 fs/read_write.c:414
__vfs_read+0xb1/0xc0 fs/read_write.c:427
vfs_read fs/read_write.c:461 [inline]
vfs_read+0x143/0x2c0 fs/read_write.c:446
ksys_read+0xd5/0x1b0 fs/read_write.c:587
__do_sys_read fs/read_write.c:597 [inline]
__se_sys_read fs/read_write.c:595 [inline]
__x64_sys_read+0x4c/0x60 fs/read_write.c:595
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 11168 Comm: syz-executor.0 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
943170998b20 ("tun: enable NAPI for TUN/TAP driver")
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Fri, 15 Nov 2019 08:31:22 +0000 (16:31 +0800)]
spi: tegra20-slink: add missed clk_unprepare
[ Upstream commit
04358e40ba96d687c0811c21d9dede73f5244a98 ]
The driver misses calling clk_unprepare in probe failure and remove.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Tue, 12 Nov 2019 22:36:29 +0000 (23:36 +0100)]
ASoC: wm8904: fix regcache handling
[ Upstream commit
e9149b8c00d25dbaef1aa174fc604bed207e576d ]
The current code assumes that the power is turned off in
SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't
turned off and the registers are not reset to their default values but
the regcache is still marked as dirty. Thus a value might not be written
to the hardware if it is set to the default value. Do a software reset
before turning off the power to make sure the registers are always reset
to their default states.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Xuerui [Fri, 15 Nov 2019 07:28:02 +0000 (09:28 +0200)]
iwlwifi: mvm: fix unaligned read of rx_pkt_status
[ Upstream commit
c5aaa8be29b25dfe1731e9a8b19fd91b7b789ee3 ]
This is present since the introduction of iwlmvm.
Example stack trace on MIPS:
[<
ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm]
[<
ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi]
Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the
problem. No other unaligned accesses are spotted yet.
Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Righi [Wed, 13 Nov 2019 08:03:21 +0000 (16:03 +0800)]
bcache: fix deadlock in bcache_allocator
[ Upstream commit
84c529aea182939e68f618ed9813740c9165c7eb ]
bcache_allocator can call the following:
bch_allocator_thread()
-> bch_prio_write()
-> bch_bucket_alloc()
-> wait on &ca->set->bucket_wait
But the wake up event on bucket_wait is supposed to come from
bch_allocator_thread() itself => deadlock:
[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds.
[ 1158.495929] Not tainted 5.3.0-050300rc3-generic #
201908042232
[ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1158.504413] bcache_allocato D 0 15861 2 0x80004000
[ 1158.504419] Call Trace:
[ 1158.504429] __schedule+0x2a8/0x670
[ 1158.504432] schedule+0x2d/0x90
[ 1158.504448] bch_bucket_alloc+0xe5/0x370 [bcache]
[ 1158.504453] ? wait_woken+0x80/0x80
[ 1158.504466] bch_prio_write+0x1dc/0x390 [bcache]
[ 1158.504476] bch_allocator_thread+0x233/0x490 [bcache]
[ 1158.504491] kthread+0x121/0x140
[ 1158.504503] ? invalidate_buckets+0x890/0x890 [bcache]
[ 1158.504506] ? kthread_park+0xb0/0xb0
[ 1158.504510] ret_from_fork+0x35/0x40
Fix by making the call to bch_prio_write() non-blocking, so that
bch_allocator_thread() never waits on itself.
Moreover, make sure to wake up the garbage collector thread when
bch_prio_write() is failing to allocate buckets.
BugLink: https://bugs.launchpad.net/bugs/1784665
BugLink: https://bugs.launchpad.net/bugs/1796292
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Tue, 29 Oct 2019 08:31:44 +0000 (17:31 +0900)]
tracing/kprobe: Check whether the non-suffixed symbol is notrace
[ Upstream commit
c7411a1a126f649be71526a36d4afac9e5aefa13 ]
Check whether the non-suffixed symbol is notrace, since suffixed
symbols are generated by the compilers for optimization. Based on
these suffixed symbols, notrace check might not work because
some of them are just a partial code of the original function.
(e.g. cold-cache (unlikely) code is separated from original
function as FUNCTION.cold.XX)
For example, without this fix,
# echo p device_add.cold.67 > /sys/kernel/debug/tracing/kprobe_events
sh: write error: Invalid argument
# cat /sys/kernel/debug/tracing/error_log
[ 135.491035] trace_kprobe: error: Failed to register probe event
Command: p device_add.cold.67
^
# dmesg | tail -n 1
[ 135.488599] trace_kprobe: Could not probe notrace function device_add.cold.67
With this,
# echo p device_add.cold.66 > /sys/kernel/debug/tracing/kprobe_events
# cat /sys/kernel/debug/kprobes/list
ffffffff81599de9 k device_add.cold.66+0x0 [DISABLED]
Actually, kprobe blacklist already did similar thing,
see within_kprobe_blacklist().
Link: http://lkml.kernel.org/r/157233790394.6706.18243942030937189679.stgit@devnote2
Fixes:
45408c4f9250 ("tracing: kprobes: Prohibit probing on notrace function")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuming Han [Thu, 24 Oct 2019 03:34:30 +0000 (11:34 +0800)]
tracing: use kvcalloc for tgid_map array allocation
[ Upstream commit
6ee40511cb838f9ced002dff7131bca87e3ccbdd ]
Fail to allocate memory for tgid_map, because it requires order-6 page.
detail as:
c3 sh: page allocation failure: order:6,
mode:0x140c0c0(GFP_KERNEL), nodemask=(null)
c3 sh cpuset=/ mems_allowed=0
c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10
c3 Hardware name: Generic DT based system
c3 Backtrace:
c3 [<
c010bdbc>] (dump_backtrace) from [<
c010c08c>](show_stack+0x18/0x1c)
c3 [<
c010c074>] (show_stack) from [<
c0993c54>](dump_stack+0x84/0xa4)
c3 [<
c0993bd0>] (dump_stack) from [<
c0229858>](warn_alloc+0xc4/0x19c)
c3 [<
c0229798>] (warn_alloc) from [<
c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28)
c3 [<
c02299cc>] (__alloc_pages_nodemask) from [<
c0248344>](kmalloc_order+0x20/0x38)
c3 [<
c0248324>] (kmalloc_order) from [<
c0248380>](kmalloc_order_trace+0x24/0x108)
c3 [<
c024835c>] (kmalloc_order_trace) from [<
c01e6078>](set_tracer_flag+0xb0/0x158)
c3 [<
c01e5fc8>] (set_tracer_flag) from [<
c01e6404>](trace_options_core_write+0x7c/0xcc)
c3 [<
c01e6388>] (trace_options_core_write) from [<
c0278b1c>](__vfs_write+0x40/0x14c)
c3 [<
c0278adc>] (__vfs_write) from [<
c0278e10>](vfs_write+0xc4/0x198)
c3 [<
c0278d4c>] (vfs_write) from [<
c027906c>](SyS_write+0x6c/0xd0)
c3 [<
c0279000>] (SyS_write) from [<
c01079a0>](ret_fast_syscall+0x0/0x54)
Switch to use kvcalloc to avoid unexpected allocation failures.
Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@unisoc.com
Signed-off-by: Yuming Han <yuming.han@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lianbo Jiang [Fri, 8 Nov 2019 09:00:27 +0000 (17:00 +0800)]
x86/crash: Add a forward declaration of struct kimage
[ Upstream commit
112eee5d06007dae561f14458bde7f2a4879ef4e ]
Add a forward declaration of struct kimage to the crash.h header because
future changes will invoke a crash-specific function from the realmode
init path and the compiler will complain otherwise like this:
In file included from arch/x86/realmode/init.c:11:
./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
5 | int crash_load_segments(struct kimage *image);
| ^~~~~~
./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
6 | int crash_copy_backup_region(struct kimage *image);
| ^~~~~~
./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
7 | int crash_setup_memmap_entries(struct kimage *image,
|
[ bp: Rewrite the commit message. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-4-lijiang@redhat.com
Link: https://lkml.kernel.org/r/201910310233.EJRtTMWP%25lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viresh Kumar [Thu, 14 Nov 2019 03:36:17 +0000 (09:06 +0530)]
cpufreq: Register drivers only after CPU devices have been registered
[ Upstream commit
46770be0cf94149ca48be87719bda1d951066644 ]
The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.
This happens due to following sequence of events:
- cpufreq_register_driver()
- subsys_interface_register()
- return 0; //successful registration of driver
... at a later point of time
- register_cpu();
- device_register();
- bus_probe_device();
- sif->add_dev();
- cpufreq_add_dev();
- get_cpu_device(); //FAILS
- per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device()
- return 0; //CPU registered successfully
Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.
This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else
return -EPROBE_DEFER.
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Wed, 13 Nov 2019 08:03:17 +0000 (16:03 +0800)]
bcache: fix static checker warning in bcache_device_free()
[ Upstream commit
2d8869518a525c9bce5f5268419df9dfbe3dfdeb ]
Commit
cafe56359144 ("bcache: A block layer cache") leads to the
following static checker warning:
./drivers/md/bcache/super.c:770 bcache_device_free()
warn: variable dereferenced before check 'd->disk' (see line 766)
drivers/md/bcache/super.c
762 static void bcache_device_free(struct bcache_device *d)
763 {
764 lockdep_assert_held(&bch_register_lock);
765
766 pr_info("%s stopped", d->disk->disk_name);
^^^^^^^^^
Unchecked dereference.
767
768 if (d->c)
769 bcache_device_detach(d);
770 if (d->disk && d->disk->flags & GENHD_FL_UP)
^^^^^^^
Check too late.
771 del_gendisk(d->disk);
772 if (d->disk && d->disk->queue)
773 blk_cleanup_queue(d->disk->queue);
774 if (d->disk) {
775 ida_simple_remove(&bcache_device_idx,
776 first_minor_to_idx(d->disk->first_minor));
777 put_disk(d->disk);
778 }
779
It is not 100% sure that the gendisk struct of bcache device will always
be there, the warning makes sense when there is problem in block core.
This patch tries to remove the static checking warning by checking
d->disk to avoid NULL pointer deferences.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudip Mukherjee [Wed, 16 Oct 2019 14:45:39 +0000 (15:45 +0100)]
parport: load lowlevel driver if ports not found
[ Upstream commit
231ec2f24dad18d021b361045bbd618ba62a274e ]
Usually all the distro will load the parport low level driver as part
of their initialization. But we can get into a situation where all the
parallel port drivers are built as module and we unload all the modules
at a later time. Then if we just do "modprobe parport" it will only
load the parport module and will not load the low level driver which
will actually register the ports. So, check the bus if there is any
parport registered, if not, load the low level driver.
We can get into the above situation with all distro but only Suse has
setup the alias for "parport_lowlevel" and so it only works in Suse.
Users of Debian based distro will need to load the lowlevel module
manually.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eduard Hasenleithner [Tue, 12 Nov 2019 20:55:01 +0000 (21:55 +0100)]
nvme: Discard workaround for non-conformant devices
[ Upstream commit
530436c45ef2e446c12538a400e465929a0b3ade ]
Users observe IOMMU related errors when performing discard on nvme from
non-compliant nvme devices reading beyond the end of the DMA mapped
ranges to discard.
Two different variants of this behavior have been observed: SM22XX
controllers round up the read size to a multiple of 512 bytes, and Phison
E12 unconditionally reads the maximum discard size allowed by the spec
(256 segments or 4kB).
Make nvme_setup_discard unconditionally allocate the maximum DSM buffer
so the driver DMA maps a memory range that will always succeed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202665
Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at>
[changelog, use existing define, kernel coding style]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilya Leoshkevich [Thu, 31 Oct 2019 17:25:16 +0000 (18:25 +0100)]
s390/disassembler: don't hide instruction addresses
[ Upstream commit
544f1d62e3e6c6e6d17a5e56f6139208acb5ff46 ]
Due to kptr_restrict, JITted BPF code is now displayed like this:
000000000b6ed1b2:
ebdff0800024 stmg %r13,%r15,128(%r15)
000000004cde2ba0:
41d0f040 la %r13,64(%r15)
00000000fbad41b0:
a7fbffa0 aghi %r15,-96
Leaking kernel addresses to dmesg is not a concern in this case, because
this happens only when JIT debugging is explicitly activated, which only
root can do.
Use %px in this particular instance, and also to print an instruction
address in show_code and PCREL (e.g. brasl) arguments in print_insn.
While at present functionally equivalent to %016lx, %px is recommended
by Documentation/core-api/printk-formats.rst for such cases.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu-Hsuan Hsu [Mon, 23 Sep 2019 16:29:40 +0000 (00:29 +0800)]
ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraint
[ Upstream commit
e2db787bdcb4f2722ecf410168f0583764634e45 ]
On KBL platform, the microphone is attached to external codec(rt5514)
instead of PCH. However, TDM slot between PCH and codec is 16 bits only.
In order to avoid setting wrong format, we should add a constraint to
force to use 16 bits format forever.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Popa [Wed, 6 Nov 2019 09:47:21 +0000 (11:47 +0200)]
iio: dac: ad5446: Add support for new AD5600 DAC
[ Upstream commit
6376cbe549fffb378403cee78efd26b8a2c8e450 ]
The AD5600 is a single channel, 16-bit resolution, voltage output digital
to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is
part of the AD5541 family of DACs.
The ad5446 IIO driver implements support for some of these DACs (in the
AD5441 family), so the change is a simple entry in this driver.
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Zhang [Wed, 6 Nov 2019 01:13:30 +0000 (17:13 -0800)]
ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile
[ Upstream commit
eabf424f7b60246c76dcb0ea6f1e83ef9abbeaa6 ]
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.
Marking MX-64h as volatile in regmap solved the issue.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Sat, 9 Nov 2019 08:09:43 +0000 (16:09 +0800)]
spi: pxa2xx: Add missed security checks
[ Upstream commit
5eb263ef08b5014cfc2539a838f39d2fd3531423 ]
pxa2xx_spi_init_pdata misses checks for devm_clk_get and
platform_get_irq.
Add checks for them to fix the bugs.
Since ssp->clk and ssp->irq are used in probe, they are mandatory here.
So we cannot use _optional() for devm_clk_get and platform_get_irq.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Richter [Wed, 6 Nov 2019 09:33:23 +0000 (09:33 +0000)]
EDAC/ghes: Fix grain calculation
[ Upstream commit
7088e29e0423d3195e09079b4f849ec4837e5a75 ]
The current code to convert a physical address mask to a grain
(defined as granularity in bytes) is:
e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK);
This is broken in several ways:
1) It calculates to wrong grain values. E.g., a physical address mask
of ~0xfff should give a grain of 0x1000. Without considering
PAGE_MASK, there is an off-by-one. Things are worse when also
filtering it with ~PAGE_MASK. This will calculate to a grain with the
upper bits set. In the example it even calculates to ~0.
2) The grain does not depend on and is unrelated to the kernel's
page-size. The page-size only matters when unmapping memory in
memory_failure(). Smaller grains are wrongly rounded up to the
page-size, on architectures with a configurable page-size (e.g. arm64)
this could round up to the even bigger page-size of the hypervisor.
Fix this with:
e->grain = ~mem_err->physical_addr_mask + 1;
The grain_bits are defined as:
grain = 1 << grain_bits;
Change also the grain_bits calculation accordingly, it is the same
formula as in edac_mc.c now and the code can be unified.
The value in ->physical_addr_mask coming from firmware is assumed to
be contiguous, but this is not sanity-checked. However, in case the
mask is non-contiguous, a conversion to grain_bits effectively
converts the grain bit mask to a power of 2 by rounding it up.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Sun, 10 Nov 2019 06:28:15 +0000 (07:28 +0100)]
media: si470x-i2c: add missed operations in remove
[ Upstream commit
2df200ab234a86836a8879a05a8007d6b884eb14 ]
The driver misses calling v4l2_ctrl_handler_free and
v4l2_device_unregister in remove like what is done in probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mitch Williams [Wed, 6 Nov 2019 10:05:36 +0000 (02:05 -0800)]
ice: delay less
[ Upstream commit
88bb432a55de8ae62106305083a8bfbb23b01ad2 ]
Shorten the delay for SQ responses, but increase the number of loops.
Max delay time is unchanged, but some operations complete much more
quickly.
In the process, add a new define to make the delay count and delay time
more explicit. Add comments to make things more explicit.
This fixes a problem with VF resets failing on with many VFs.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Mon, 28 Oct 2019 07:39:07 +0000 (15:39 +0800)]
crypto: atmel - Fix authenc support when it is set to m
[ Upstream commit
1520c72596dde7f22b8bd6bed3ef7df2b8b7ef39 ]
As it is if CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is set to m it is in
effect disabled. This patch fixes it by using IS_ENABLED instead
of ifdef.
Fixes:
89a82ef87e01 ("crypto: atmel-authenc - add support to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Tue, 22 Oct 2019 23:29:48 +0000 (18:29 -0500)]
soundwire: intel: fix PDI/stream mapping for Bulk
[ Upstream commit
c134f914e9f55b7817e2bae625ec0e5f1379f7cd ]
The previous formula is incorrect for PDI0/1, the mapping is not
linear but has a discontinuity between PDI1 and PDI2.
This change has no effect on PCM PDIs (same mapping).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022232948.17156-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Isely [Wed, 6 Nov 2019 11:11:14 +0000 (12:11 +0100)]
media: pvrusb2: Fix oops on tear-down when radio support is not present
[ Upstream commit
7f404ae9cf2a285f73b3c18ab9303d54b7a3d8e1 ]
In some device configurations there's no radio or radio support in the
driver. That's OK, as the driver sets itself up accordingly. However
on tear-down in these caes it's still trying to tear down radio
related context when there isn't anything there, leading to
dereferences through a null pointer and chaos follows.
How this bug survived unfixed for 11 years in the pvrusb2 driver is a
mystery to me.
[hverkuil: fix two checkpatch warnings]
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Jeffery [Fri, 8 Nov 2019 05:19:39 +0000 (15:49 +1030)]
fsi: core: Fix small accesses and unaligned offsets via sysfs
[ Upstream commit
9f4c2b516b4f031e3cd0e45957f4150b3c1a083d ]
Subtracting the offset delta from four-byte alignment lead to wrapping
of the requested length where `count` is less than `off`. Generalise the
length handling to enable and optimise aligned access sizes for all
offset and size combinations. The new formula produces the following
results for given offset and count values:
offset count | length
--------------+-------
0 1 | 1
0 2 | 2
0 3 | 2
0 4 | 4
0 5 | 4
1 1 | 1
1 2 | 1
1 3 | 1
1 4 | 1
1 5 | 1
2 1 | 1
2 2 | 2
2 3 | 2
2 4 | 2
2 5 | 2
3 1 | 1
3 2 | 1
3 3 | 1
3 4 | 1
3 5 | 1
We might need something like this for the cfam chardevs as well, for
example we don't currently implement any alignment restrictions /
handling in the hardware master driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-6-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqing Pan [Wed, 6 Nov 2019 18:04:37 +0000 (20:04 +0200)]
ath10k: fix get invalid tx rate for Mesh metric
[ Upstream commit
05a11003a56507023f18d3249a4d4d119c0a3e9c ]
ath10k does not provide transmit rate info per MSDU
in tx completion, mark that as -1 so mac80211
will ignore the rates. This fixes mac80211 update Mesh
link metric with invalid transmit rate info.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Hou Bao Hou <houbao@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Wed, 30 Oct 2019 07:09:30 +0000 (16:09 +0900)]
perf probe: Filter out instances except for inlined subroutine and subprogram
[ Upstream commit
da6cb952a89efe24bb76c4971370d485737a2d85 ]
Filter out instances except for inlined_subroutine and subprogram DIE in
die_walk_instances() and die_is_func_instance().
This fixes an issue that perf probe sets some probes on calling address
instead of a target function itself.
When perf probe walks on instances of an abstruct origin (a kind of
function prototype of inlined function), die_walk_instances() can also
pass a GNU_call_site (a GNU extension for call site) to callback. Since
it is not an inlined instance of target function, we have to filter out
when searching a probe point.
Without this patch, perf probe sets probes on call site address too.This
can happen on some function which is marked "inlined", but has actual
symbol. (I'm not sure why GCC mark it "inlined"):
# perf probe -D vfs_read
p:probe/vfs_read _text+2500017
p:probe/vfs_read_1 _text+2499468
p:probe/vfs_read_2 _text+2499563
p:probe/vfs_read_3 _text+2498876
p:probe/vfs_read_4 _text+2498512
p:probe/vfs_read_5 _text+2498627
With this patch:
Slightly different results, similar tho:
# perf probe -D vfs_read
p:probe/vfs_read _text+2498512
Committer testing:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Before:
# perf probe -D vfs_read
p:probe/vfs_read _text+3131557
p:probe/vfs_read_1 _text+3130975
p:probe/vfs_read_2 _text+3131047
p:probe/vfs_read_3 _text+3130380
p:probe/vfs_read_4 _text+3130000
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
After:
# perf probe -D vfs_read
p:probe/vfs_read _text+3130000
#
Fixes:
db0d2c6420ee ("perf probe: Search concrete out-of-line instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937063.32002.11024544873990816590.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Wed, 30 Oct 2019 07:09:21 +0000 (16:09 +0900)]
perf probe: Skip end-of-sequence and non statement lines
[ Upstream commit
f4d99bdfd124823a81878b44b5e8750b97f73902 ]
Skip end-of-sequence and non-statement lines while walking through lines
list.
The "end-of-sequence" line information means:
"the current address is that of the first byte after the
end of a sequence of target machine instructions."
(DWARF version 4 spec 6.2.2)
This actually means out of scope and we can not probe on it.
On the other hand, the statement lines (is_stmt) means:
"the current instruction is a recommended breakpoint location.
A recommended breakpoint location is intended to “represent”
a line, a statement and/or a semantically distinct subpart
of a statement."
(DWARF version 4 spec 6.2.2)
So, non-statement line info also should be skipped.
These can reduce unneeded probe points and also avoid an error.
E.g. without this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1
#
This puts 5 probes on one line, but acutally it's not inlined function.
This is because there are many non statement instructions at the
function prologue.
With this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
#
Now perf-probe skips unneeded addresses.
Committer testing:
Slightly different results, but similar:
Before:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1
#
After:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
#
Fixes:
4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Wed, 30 Oct 2019 07:09:40 +0000 (16:09 +0900)]
perf probe: Fix to show calling lines of inlined functions
[ Upstream commit
86c0bf8539e7f46d91bd105e55eda96e0064caef ]
Fix to show calling lines of inlined functions (where an inline function
is called).
die_walk_lines() filtered out the lines inside inlined functions based
on the address. However this also filtered out the lines which call
those inlined functions from the target function.
To solve this issue, check the call_file and call_line attributes and do
not filter out if it matches to the line information.
Without this fix, perf probe -L doesn't show some lines correctly.
(don't see the lines after 17)
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
fsnotify_access(file);
add_rchar(current, ret);
}
With this fix:
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
17 fsnotify_access(file);
18 add_rchar(current, ret);
}
20 inc_syscr(current);
}
Fixes:
4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937995.32002.17899884017011512577.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Tue, 5 Nov 2019 00:16:49 +0000 (09:16 +0900)]
perf probe: Return a better scope DIE if there is no best scope
[ Upstream commit
c701636aeec4c173208697d68da6e4271125564b ]
Make find_best_scope() returns innermost DIE at given address if there
is no best matched scope DIE. Since Gcc sometimes generates intuitively
strange line info which is out of inlined function address range, we
need this fixup.
Without this, sometimes perf probe failed to probe on a line inside an
inlined function:
# perf probe -D ksys_open:3
Failed to find scope of probe point.
Error: Failed to add events.
With this fix, 'perf probe' can probe it:
# perf probe -D ksys_open:3
p:probe/ksys_open _text+
25707308
p:probe/ksys_open_1 _text+
25710596
p:probe/ksys_open_2 _text+
25711114
p:probe/ksys_open_3 _text+
25711343
p:probe/ksys_open_4 _text+
25714058
p:probe/ksys_open_5 _text+2819653
p:probe/ksys_open_6 _text+2819701
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157291300887.19771.14936015360963292236.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Wed, 30 Oct 2019 07:09:49 +0000 (16:09 +0900)]
perf probe: Skip overlapped location on searching variables
[ Upstream commit
dee36a2abb67c175265d49b9a8c7dfa564463d9a ]
Since debuginfo__find_probes() callback function can be called with the
location which already passed, the callback function must filter out
such overlapped locations.
add_probe_trace_event() has already done it by commit
1a375ae7659a
("perf probe: Skip same probe address for a given line"), but
add_available_vars() doesn't. Thus perf probe -v shows same address
repeatedly as below:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
With this fix, perf probe -V shows it correctly:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
Fixes:
cf6eb489e5c0 ("perf probe: Show accessible local variables")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241938927.32002.4026859017790562751.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Wed, 30 Oct 2019 22:34:46 +0000 (15:34 -0700)]
perf parse: If pmu configuration fails free terms
[ Upstream commit
38f2c4226e6bc3e8c41c318242821ba5dc825aba ]
Avoid a memory leak when the configuration fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Mon, 28 Oct 2019 20:10:25 +0000 (17:10 -0300)]
xen/gntdev: Use select for DMA_SHARED_BUFFER
[ Upstream commit
fa6614d8ef13c63aac52ad7c07c5e69ce4aba3dd ]
DMA_SHARED_BUFFER can not be enabled by the user (it represents a library
set in the kernel). The kconfig convention is to use select for such
symbols so they are turned on implicitly when the user enables a kconfig
that needs them.
Otherwise the XEN_GNTDEV_DMABUF kconfig is overly difficult to enable.
Fixes:
932d6562179e ("xen/gntdev: Add initial support for dma-buf UAPI")
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log