idr: fix param name in idr_alloc_cyclic() doc

[ Upstream commit 2a15de80dd0f7e04a823291aa9eb49c5294f56af ]

The relevant parameter is 'start' and not 'nextid'

Fixes: 460488c58ca8 ("idr: Remove idr_alloc_ext")
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: don't leak memory if dev_set_name() fails

[ Upstream commit 6252f47b78031979ad919f971dc8468b893488bd ]

When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it.

Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Change IGB_MIN to allow set rx/tx value between 64 and 80

[ Upstream commit 6319685bdc8ad5310890add907b7c42f89302886 ]

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")

Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80

[ Upstream commit 8360717524a24a421c36ef8eb512406dbd42160a ]

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")

Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Change IGC_MIN to allow set rx/tx value between 64 and 80

[ Upstream commit 5aa48279712e1f134aac908acde4df798955a955 ]

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")

Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix truncation of smq in CN10K NIX AQ enqueue mbox handler

[ Upstream commit 29fe7a1b62717d58f033009874554d99d71f7d37 ]

The smq value used in the CN10K NIX AQ instruction enqueue mailbox
handler was truncated to 9-bit value from 10-bit value because of
typecasting the CN10K mbox request structure to the CN9K structure.
Though this hasn't caused any problems when programming the NIX SQ
context to the HW because the context structure is the same size.
However, this causes a problem when accessing the structure parameters.
This patch reads the right smq value for each platform.

Fixes: 30077d210c83 ("octeontx2-af: cn10k: Update NIX/NPA context structure")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: Destroy mutex in kcm_exit_net()

[ Upstream commit 6ad40b36cd3b04209e2d6c89d252c873d8082a59 ]

kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially
needed if CONFIG_DEBUG_MUTEXES is enabled.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: sch_qfq: Fix UAF in qfq_dequeue()

[ Upstream commit 8fc134fee27f2263988ae38920bc03da416b03d8 ]

When the plug qdisc is used as a class of the qfq qdisc it could trigger a
UAF. This issue can be reproduced with following commands:

  tc qdisc add dev lo root handle 1: qfq
  tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512
  tc qdisc add dev lo parent 1:1 handle 2: plug
  tc filter add dev lo parent 1: basic classid 1:1
  ping -c1 127.0.0.1

and boom:

[  285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0
[  285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144
[  285.355903]
[  285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4
[  285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[  285.358376] Call Trace:
[  285.358773]  <IRQ>
[  285.359109]  dump_stack_lvl+0x44/0x60
[  285.359708]  print_address_description.constprop.0+0x2c/0x3c0
[  285.360611]  kasan_report+0x10c/0x120
[  285.361195]  ? qfq_dequeue+0xa7/0x7f0
[  285.361780]  qfq_dequeue+0xa7/0x7f0
[  285.362342]  __qdisc_run+0xf1/0x970
[  285.362903]  net_tx_action+0x28e/0x460
[  285.363502]  __do_softirq+0x11b/0x3de
[  285.364097]  do_softirq.part.0+0x72/0x90
[  285.364721]  </IRQ>
[  285.365072]  <TASK>
[  285.365422]  __local_bh_enable_ip+0x77/0x90
[  285.366079]  __dev_queue_xmit+0x95f/0x1550
[  285.366732]  ? __pfx_csum_and_copy_from_iter+0x10/0x10
[  285.367526]  ? __pfx___dev_queue_xmit+0x10/0x10
[  285.368259]  ? __build_skb_around+0x129/0x190
[  285.368960]  ? ip_generic_getfrag+0x12c/0x170
[  285.369653]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  285.370390]  ? csum_partial+0x8/0x20
[  285.370961]  ? raw_getfrag+0xe5/0x140
[  285.371559]  ip_finish_output2+0x539/0xa40
[  285.372222]  ? __pfx_ip_finish_output2+0x10/0x10
[  285.372954]  ip_output+0x113/0x1e0
[  285.373512]  ? __pfx_ip_output+0x10/0x10
[  285.374130]  ? icmp_out_count+0x49/0x60
[  285.374739]  ? __pfx_ip_finish_output+0x10/0x10
[  285.375457]  ip_push_pending_frames+0xf3/0x100
[  285.376173]  raw_sendmsg+0xef5/0x12d0
[  285.376760]  ? do_syscall_64+0x40/0x90
[  285.377359]  ? __static_call_text_end+0x136578/0x136578
[  285.378173]  ? do_syscall_64+0x40/0x90
[  285.378772]  ? kasan_enable_current+0x11/0x20
[  285.379469]  ? __pfx_raw_sendmsg+0x10/0x10
[  285.380137]  ? __sock_create+0x13e/0x270
[  285.380673]  ? __sys_socket+0xf3/0x180
[  285.381174]  ? __x64_sys_socket+0x3d/0x50
[  285.381725]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.382425]  ? __rcu_read_unlock+0x48/0x70
[  285.382975]  ? ip4_datagram_release_cb+0xd8/0x380
[  285.383608]  ? __pfx_ip4_datagram_release_cb+0x10/0x10
[  285.384295]  ? preempt_count_sub+0x14/0xc0
[  285.384844]  ? __list_del_entry_valid+0x76/0x140
[  285.385467]  ? _raw_spin_lock_bh+0x87/0xe0
[  285.386014]  ? __pfx__raw_spin_lock_bh+0x10/0x10
[  285.386645]  ? release_sock+0xa0/0xd0
[  285.387148]  ? preempt_count_sub+0x14/0xc0
[  285.387712]  ? freeze_secondary_cpus+0x348/0x3c0
[  285.388341]  ? aa_sk_perm+0x177/0x390
[  285.388856]  ? __pfx_aa_sk_perm+0x10/0x10
[  285.389441]  ? check_stack_object+0x22/0x70
[  285.390032]  ? inet_send_prepare+0x2f/0x120
[  285.390603]  ? __pfx_inet_sendmsg+0x10/0x10
[  285.391172]  sock_sendmsg+0xcc/0xe0
[  285.391667]  __sys_sendto+0x190/0x230
[  285.392168]  ? __pfx___sys_sendto+0x10/0x10
[  285.392727]  ? kvm_clock_get_cycles+0x14/0x30
[  285.393328]  ? set_normalized_timespec64+0x57/0x70
[  285.393980]  ? _raw_spin_unlock_irq+0x1b/0x40
[  285.394578]  ? __x64_sys_clock_gettime+0x11c/0x160
[  285.395225]  ? __pfx___x64_sys_clock_gettime+0x10/0x10
[  285.395908]  ? _copy_to_user+0x3e/0x60
[  285.396432]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.397086]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.397734]  ? do_syscall_64+0x71/0x90
[  285.398258]  __x64_sys_sendto+0x74/0x90
[  285.398786]  do_syscall_64+0x64/0x90
[  285.399273]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.399949]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.400605]  ? do_syscall_64+0x71/0x90
[  285.401124]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.401807] RIP: 0033:0x495726
[  285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09
[  285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726
[  285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000
[  285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c
[  285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634
[  285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000
[  285.410403]  </TASK>
[  285.410704]
[  285.410929] Allocated by task 144:
[  285.411402]  kasan_save_stack+0x1e/0x40
[  285.411926]  kasan_set_track+0x21/0x30
[  285.412442]  __kasan_slab_alloc+0x55/0x70
[  285.412973]  kmem_cache_alloc_node+0x187/0x3d0
[  285.413567]  __alloc_skb+0x1b4/0x230
[  285.414060]  __ip_append_data+0x17f7/0x1b60
[  285.414633]  ip_append_data+0x97/0xf0
[  285.415144]  raw_sendmsg+0x5a8/0x12d0
[  285.415640]  sock_sendmsg+0xcc/0xe0
[  285.416117]  __sys_sendto+0x190/0x230
[  285.416626]  __x64_sys_sendto+0x74/0x90
[  285.417145]  do_syscall_64+0x64/0x90
[  285.417624]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.418306]
[  285.418531] Freed by task 144:
[  285.418960]  kasan_save_stack+0x1e/0x40
[  285.419469]  kasan_set_track+0x21/0x30
[  285.419988]  kasan_save_free_info+0x27/0x40
[  285.420556]  ____kasan_slab_free+0x109/0x1a0
[  285.421146]  kmem_cache_free+0x1c2/0x450
[  285.421680]  __netif_receive_skb_core+0x2ce/0x1870
[  285.422333]  __netif_receive_skb_one_core+0x97/0x140
[  285.423003]  process_backlog+0x100/0x2f0
[  285.423537]  __napi_poll+0x5c/0x2d0
[  285.424023]  net_rx_action+0x2be/0x560
[  285.424510]  __do_softirq+0x11b/0x3de
[  285.425034]
[  285.425254] The buggy address belongs to the object at ffff8880bad31280
[  285.425254]  which belongs to the cache skbuff_head_cache of size 224
[  285.426993] The buggy address is located 40 bytes inside of
[  285.426993]  freed 224-byte region [ffff8880bad31280, ffff8880bad31360)
[  285.428572]
[  285.428798] The buggy address belongs to the physical page:
[  285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31
[  285.430758] flags: 0x100000000000200(slab|node=0|zone=1)
[  285.431447] page_type: 0xffffffff()
[  285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000
[  285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
[  285.433562] page dumped because: kasan: bad access detected
[  285.434144]
[  285.434320] Memory state around the buggy address:
[  285.434828]  ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.435580]  ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  285.436777]                                   ^
[  285.437106]  ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  285.437616]  ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.438126] ==================================================================
[  285.438662] Disabling lock debugging due to kernel taint

Fix this by:
1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a
function compatible with non-work-conserving qdiscs
2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq.

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: valis <sec@valis.email>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: Fix data race around sk->sk_err.

[ Upstream commit b192812905e4b134f7b7994b079eb647e9d2d37e ]

As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().

Let's use READ_ONCE() for sk_err as well.

Note that the writer side is marked by commit cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: Fix data-races around sk->sk_shutdown.

[ Upstream commit afe8764f76346ba838d4f162883e23d2fcfaa90e ]

sk->sk_shutdown is changed under unix_state_lock(sk), but
unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly.

  sock_alloc_send_pskb
  `- sock_wait_for_wmem

Let's use READ_ONCE() there.

Note that the writer side was marked by commit e1d09c2c2f57 ("af_unix:
Fix data races around sk->sk_shutdown.").

BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock

write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1:
 unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
 unix_release+0x59/0x80 net/unix/af_unix.c:1053
 __sock_release+0x7d/0x170 net/socket.c:654
 sock_close+0x19/0x30 net/socket.c:1386
 __fput+0x2a3/0x680 fs/file_table.c:384
 ____fput+0x15/0x20 fs/file_table.c:412
 task_work_run+0x116/0x1a0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0:
 sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767
 unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944
 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
 unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
 sock_sendmsg_nosec net/socket.c:725 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:748
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548
 __sys_sendmsg+0x94/0x140 net/socket.c:2577
 __do_sys_sendmsg net/socket.c:2586 [inline]
 __se_sys_sendmsg net/socket.c:2584 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x00 -> 0x03

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: Fix data-race around unix_tot_inflight.

[ Upstream commit ade32bd8a738d7497ffe9743c46728db26740f78 ]

unix_tot_inflight is changed under spin_lock(unix_gc_lock), but
unix_release_sock() reads it locklessly.

Let's use READ_ONCE() for unix_tot_inflight.

Note that the writer side was marked by commit 9d6d7f1cb67c ("af_unix:
annote lockless accesses to unix_tot_inflight & gc_in_progress")

BUG: KCSAN: data-race in unix_inflight / unix_release_sock

write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1:
 unix_inflight+0x130/0x180 net/unix/scm.c:64
 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123
 unix_scm_to_skb net/unix/af_unix.c:1832 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:747
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547
 __sys_sendmsg+0x94/0x140 net/socket.c:2576
 __do_sys_sendmsg net/socket.c:2585 [inline]
 __se_sys_sendmsg net/socket.c:2583 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0:
 unix_release_sock+0x608/0x910 net/unix/af_unix.c:671
 unix_release+0x59/0x80 net/unix/af_unix.c:1058
 __sock_release+0x7d/0x170 net/socket.c:653
 sock_close+0x19/0x30 net/socket.c:1385
 __fput+0x179/0x5e0 fs/file_table.c:321
 ____fput+0x15/0x20 fs/file_table.c:349
 task_work_run+0x116/0x1a0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 9305cfa4443d ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: Fix data-races around user->unix_inflight.

[ Upstream commit 0bc36c0650b21df36fbec8136add83936eaf0607 ]

user->unix_inflight is changed under spin_lock(unix_gc_lock),
but too_many_unix_fds() reads it locklessly.

Let's annotate the write/read accesses to user->unix_inflight.

BUG: KCSAN: data-race in unix_attach_fds / unix_inflight

write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1:
 unix_inflight+0x157/0x180 net/unix/scm.c:66
 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123
 unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
 unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
 sock_sendmsg_nosec net/socket.c:725 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:748
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548
 __sys_sendmsg+0x94/0x140 net/socket.c:2577
 __do_sys_sendmsg net/socket.c:2586 [inline]
 __se_sys_sendmsg net/socket.c:2584 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0:
 too_many_unix_fds net/unix/scm.c:101 [inline]
 unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110
 unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
 unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
 sock_sendmsg_nosec net/socket.c:725 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:748
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548
 __sys_sendmsg+0x94/0x140 net/socket.c:2577
 __do_sys_sendmsg net/socket.c:2586 [inline]
 __se_sys_sendmsg net/socket.c:2584 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x000000000000000c -> 0x000000000000000d

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 712f4aad406b ("unix: properly account for FDs passed over unix sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix skb refcnt race after locking changes

[ Upstream commit a454d84ee20baf7bd7be90721b9821f73c7d23d9 ]

There is a race where skb's from the sk_psock_backlog can be referenced
after userspace side has already skb_consumed() the sk_buff and its refcnt
dropped to zer0 causing use after free.

The flow is the following:

  while ((skb = skb_peek(&psock->ingress_skb))
    sk_psock_handle_Skb(psock, skb, ..., ingress)
    if (!ingress) ...
    sk_psock_skb_ingress
       sk_psock_skb_ingress_enqueue(skb)
          msg->skb = skb
          sk_psock_queue_msg(psock, msg)
    skb_dequeue(&psock->ingress_skb)

The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is
what the application reads when recvmsg() is called. An application can
read this anytime after the msg is placed on the queue. The recvmsg hook
will also read msg->skb and then after user space reads the msg will call
consume_skb(skb) on it effectively free'ing it.

But, the race is in above where backlog queue still has a reference to
the skb and calls skb_dequeue(). If the skb_dequeue happens after the
user reads and free's the skb we have a use after free.

The !ingress case does not suffer from this problem because it uses
sendmsg_*(sk, msg) which does not pass the sk_buff further down the
stack.

The following splat was observed with 'test_progs -t sockmap_listen':

  [ 1022.710250][ T2556] general protection fault, ...
  [...]
  [ 1022.712830][ T2556] Workqueue: events sk_psock_backlog
  [ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80
  [ 1022.713653][ T2556] Code: ...
  [...]
  [ 1022.720699][ T2556] Call Trace:
  [ 1022.720984][ T2556]  <TASK>
  [ 1022.721254][ T2556]  ? die_addr+0x32/0x80^M
  [ 1022.721589][ T2556]  ? exc_general_protection+0x25a/0x4b0
  [ 1022.722026][ T2556]  ? asm_exc_general_protection+0x22/0x30
  [ 1022.722489][ T2556]  ? skb_dequeue+0x4c/0x80
  [ 1022.722854][ T2556]  sk_psock_backlog+0x27a/0x300
  [ 1022.723243][ T2556]  process_one_work+0x2a7/0x5b0
  [ 1022.723633][ T2556]  worker_thread+0x4f/0x3a0
  [ 1022.723998][ T2556]  ? __pfx_worker_thread+0x10/0x10
  [ 1022.724386][ T2556]  kthread+0xfd/0x130
  [ 1022.724709][ T2556]  ? __pfx_kthread+0x10/0x10
  [ 1022.725066][ T2556]  ret_from_fork+0x2d/0x50
  [ 1022.725409][ T2556]  ? __pfx_kthread+0x10/0x10
  [ 1022.725799][ T2556]  ret_from_fork_asm+0x1b/0x30
  [ 1022.726201][ T2556]  </TASK>

To fix we add an skb_get() before passing the skb to be enqueued in the
engress queue. This bumps the skb->users refcnt so that consume_skb()
and kfree_skb will not immediately free the sk_buff. With this we can
be sure the skb is still around when we do the dequeue. Then we just
need to decrement the refcnt or free the skb in the backlog case which
we do by calling kfree_skb() on the ingress case as well as the sendmsg
case.

Before locking change from fixes tag we had the sock locked so we
couldn't race with user and there was no issue here.

Fixes: 799aa7f98d53e ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Xu Kuohai <xukuohai@huawei.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230901202137.214666-1-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: micrel: Correct bit assignments for phy_device flags

[ Upstream commit 719c5e37e99d2fd588d1c994284d17650a66354c ]

Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:

- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
  with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
  the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
  triggered for KSZ88xx.

To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.

Fixes: 49011e0c1555 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr

[ Upstream commit f31867d0d9d82af757c1e0178b659438f4c1ea3c ]

The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.

Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

veth: Fixing transmit return status for dropped packets

[ Upstream commit 151e887d8ff97e2e42110ffa1fb1e6a2128fb364 ]

The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.

Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: fix frag_list chaining

[ Upstream commit 817c7cd2043a83a3d8147f40eea1505ac7300b62 ]

gve_rx_append_frags() is able to build skbs chained with frag_list,
like GRO engine.

Problem is that shinfo->frag_list should only be used
for the head of the chain.

All other links should use skb->next pointer.

Otherwise, built skbs are not valid and can cause crashes.

Equivalent code in GRO (skb_gro_receive()) is:

    if (NAPI_GRO_CB(p)->last == p)
        skb_shinfo(p)->frag_list = skb;
    else
        NAPI_GRO_CB(p)->last->next = skb;
    NAPI_GRO_CB(p)->last = skb;

Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bailey Forrest <bcf@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Catherine Sullivan <csully@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: disable virtualization features on 82580

[ Upstream commit fa09bc40b21a33937872c4c4cf0f266ec9fa4869 ]

Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.

Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: ignore dst hint for multipath routes

[ Upstream commit 8423be8926aa82cd2e28bba5cc96ccb72c7ce6be ]

Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.

A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in fib6_select_path() and use it in
ip6_can_use_hint() to check for the existence of the flag.

Fixes: 197dbf24e360 ("ipv6: introduce and uses route look hints for list input.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: ignore dst hint for multipath routes

[ Upstream commit 6ac66cb03ae306c2e288a9be18226310529f5b25 ]

Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.

A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.

Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: annotate data-races around msk->rmem_fwd_alloc

[ Upstream commit 9531e4a83febc3fb47ac77e24cfb5ea97e50034d ]

msk->rmem_fwd_alloc can be read locklessly.

Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(),
and appropriate READ_ONCE()/WRITE_ONCE() annotations.

Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_forward_alloc

[ Upstream commit 5e6300e7b3a4ab5b72a82079753868e91fbf9efc ]

Every time sk->sk_forward_alloc is read locklessly,
add a READ_ONCE().

Add sk_forward_alloc_add() helper to centralize updates,
to reduce number of WRITE_ONCE().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: use sk_forward_alloc_get() in sk_get_meminfo()

[ Upstream commit 66d58f046c9d3a8f996b7138d02e965fd0617de0 ]

inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(),
but sk_get_meminfo() was forgotten.

Fixes: 292e6077b040 ("net: introduce sk_forward_alloc_get()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: Drop unused helper intel_vgpu_reset_gtt()

[ Upstream commit a90c367e5af63880008e21dd199dac839e0e9e0f ]

Drop intel_vgpu_reset_gtt() as it no longer has any callers.  In addition
to eliminating dead code, this eliminates the last possible scenario where
__kvmgt_protect_table_find() can be reached without holding vgpu_lock.
Requiring vgpu_lock to be held when calling __kvmgt_protect_table_find()
will allow a protecting the gfn hash with vgpu_lock without too much fuss.

No functional change intended.

Fixes: ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.")
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: Put the page reference obtained by KVM's gfn_to_pfn()

[ Upstream commit 708e49583d7da863898b25dafe4bcd799c414278 ]

Put the struct page reference acquired by gfn_to_pfn(), KVM's API is that
the caller is ultimately responsible for dropping any reference.

Note, kvm_release_pfn_clean() ensures the pfn is actually a refcounted
struct page before trying to put any references.

Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: Verify pfn is "valid" before dereferencing "struct page"

[ Upstream commit f046923af79158361295ed4f0a588c80b9fdcc1d ]

Check that the pfn found by gfn_to_pfn() is actually backed by "struct
page" memory prior to retrieving and dereferencing the page.  KVM
supports backing guest memory with VM_PFNMAP, VM_IO, etc., and so
there is no guarantee the pfn returned by gfn_to_pfn() has an associated
"struct page".

Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Fix xsk_diag use-after-free error during socket cleanup

[ Upstream commit 3e019d8a05a38abb5c85d4f1e85fda964610aa14 ]

Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.

The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.

Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown")
Reported-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fib: avoid warn splat in flow dissector

[ Upstream commit 8aae7625ff3f0bd5484d01f1b8d5af82e44bec2d ]

New skbs allocated via nf_send_reset() have skb->dev == NULL.

fib*_rules_early_flow_dissect helpers already have a 'struct net'
argument but its not passed down to the flow dissector core, which
will then WARN as it can't derive a net namespace to use:

 WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0
 [..]
  ip_route_me_harder+0x143/0x330
  nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4]
  nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet]
  nft_do_chain+0x198/0x5d0 [nf_tables]
  nft_do_chain_inet+0xa4/0x110 [nf_tables]
  nf_hook_slow+0x41/0xc0
  ip_local_deliver+0xce/0x110
  ..

Cc: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Ido Schimmel <idosch@nvidia.com>
Fixes: 812fa71f0d96 ("netfilter: Dissect flow after packet mangling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830110043.30497-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: read sk->sk_family once in sk_mc_loop()

[ Upstream commit a3e0fdf71bbe031de845e8e08ed7fba49f9c702c ]

syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()

We have many more similar issues to fix.

WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695

Fixes: 7ad6848c7e81 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: annotate data-races around fi->fib_dead

[ Upstream commit fce92af1c29d90184dfec638b5738831097d66e9 ]

syzbot complained about a data-race in fib_table_lookup() [1]

Add appropriate annotations to document it.

[1]
BUG: KCSAN: data-race in fib_release_info / fib_table_lookup

write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0:
fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281
fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777
fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106
fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317
fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448
notifier_call_chain kernel/notifier.c:93 [inline]
blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388
__inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432
inet_del_ifa net/ipv4/devinet.c:469 [inline]
inetdev_destroy net/ipv4/devinet.c:322 [inline]
inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1962 [inline]
call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037
dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673
do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837
rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1129
do_iter_write+0x4b4/0x7b0 fs/read_write.c:860
vfs_writev+0x1a8/0x320 fs/read_write.c:933
do_writev+0xf8/0x220 fs/read_write.c:976
__do_sys_writev fs/read_write.c:1049 [inline]
__se_sys_writev fs/read_write.c:1046 [inline]
__x64_sys_writev+0x45/0x50 fs/read_write.c:1046
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0

Fixes: dccd9ecc3744 ("ipv4: Do not use dead fib_info entries.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830095520.1046984-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: annotate data-races around sk->sk_wmem_queued

[ Upstream commit dc9511dd6f37fe803f6b15b61b030728d7057417 ]

sk->sk_wmem_queued can be read locklessly from sctp_poll()

Use sk_wmem_queued_add() when the field is changed,
and add READ_ONCE() annotations in sctp_writeable()
and sctp_assocs_seq_show()

syzbot reported:

BUG: KCSAN: data-race in sctp_poll / sctp_wfree

read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0:
sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147
skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988
skb_release_all net/core/skbuff.c:1000 [inline]
__kfree_skb+0x16/0x140 net/core/skbuff.c:1016
consume_skb+0x57/0x180 net/core/skbuff.c:1232
sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline]
sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530
sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128
sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515
sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051
sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80
sctp_rcv+0x116e/0x1340 net/sctp/input.c:243
sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
process_backlog+0x21f/0x380 net/core/dev.c:5894
__napi_poll+0x60/0x3b0 net/core/dev.c:6460
napi_poll net/core/dev.c:6527 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6660
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00019e80 -> 0x0000cc80

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: fq_pie: avoid stalls in fq_pie_timer()

[ Upstream commit 8c21ab1bae945686c602c5bfa4e3f3352c2452c5 ]

When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.

Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.

Relevant extract from syzbot report:

rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236
Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b
RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206
RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0
RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <NMI>
 </NMI>
 <IRQ>
 pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415
 fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387
 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Link: https://lore.kernel.org/lkml/00000000000017ad3f06040bf394@google.com/
Reported-by: syzbot+e46fbd5289363464bc13@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230829123541.3745013-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: propagate error code of extract_sharename()

[ Upstream commit efc0b0bcffcba60d9c6301063d25a22a4744b499 ]

In addition to the EINVAL, there may be an ENOMEM.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: use fs_context for automounts

[ Upstream commit 9fd29a5bae6e8f94b410374099a6fddb253d2d5f ]

Use filesystem context support to handle dfs links.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: efc0b0bcffcb ("smb: propagate error code of extract_sharename()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()

[ Upstream commit eead0056648cef49d7b15c07ae612fa217083165 ]

Currently, 'carryover_ios/bytes' is not handled in throtl_trim_slice(),
for consequence, 'carryover_ios/bytes' will be used to throttle bio
multiple times, for example:

1) set iops limit to 100, and slice start is 0, slice end is 100ms;
2) current time is 0, and 10 ios are dispatched, those io won't be
   throttled and io_disp is 10;
3) still at current time 0, update iops limit to 1000, carryover_ios is
   updated to (0 - 10) = -10;
4) in this slice(0 - 100ms), io_allowed = 100 + (-10) = 90, which means
   only 90 ios can be dispatched without waiting;
5) assume that io is throttled in slice(0 - 100ms), and
   throtl_trim_slice() update silce to (100ms - 200ms). In this case,
   'carryover_ios/bytes' is not cleared and still only 90 ios can be
   dispatched between 100ms - 200ms.

Fix this problem by updating 'carryover_ios/bytes' in
throtl_trim_slice().

Fixes: a880ae93e5b5 ("blk-throttle: fix io hung due to configuration updates")
Reported-by: zhuxiaohui <zhuxiaohui.400@bytedance.com>
Link: https://lore.kernel.org/all/20230812072116.42321-1-zhuxiaohui.400@bytedance.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()

[ Upstream commit e8368b57c006dc0e02dcd8a9dc9f2060ff5476fe ]

There are no functional changes, just make the code cleaner.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: eead0056648c ("blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: mark requests for GuC virtual engines to avoid use-after-free

[ Upstream commit 5eefc5307c983b59344a4cb89009819f580c84fa ]

References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.

Fixes: bcb9aa45d5a0 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821153035.3903006-1-andrzej.hajda@intel.com
(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test

[ Upstream commit a84260e314029e6dc9904fd6eabf8d9fd7965351 ]

It has system-wide test and cpu-list test but the cpu-list test fails
sometimes.  It runs sleep command on CPU1 and measure both user.slice
and system.slice cgroups by default (on systemd-based systems).

But if the system was idle enough, sometime the system.slice gets no
count and it makes the test failing.  Maybe that's because it only looks
at the CPU1, let's add CPU0 to increase the chance it finds some tasks.

Fixes: 7901086014bbaa3a ("perf test: Add a new test for perf stat cgroup BPF counter")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test stat_bpf_counters_cgrp: Fix shellcheck issue about logical operators

[ Upstream commit 0dd1f815545d7210150642741c364521cc5cf116 ]

Running shellcheck on lock_contention.sh generates below warning:

In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
                                            ^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.

In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
        ^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
              ^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
                        ^-- SC2046 (warning): Quote this to prevent word splitting.

In stat_bpf_counters_cgrp.sh line 51:
local output
        ^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.

In stat_bpf_counters_cgrp.sh line 65:
local output
        ^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.

Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
  function name to the variable.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: a84260e31402 ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: lpc32xx: Remove handling of PWM channels

[ Upstream commit 4aae44f65827f0213a7361cf9c32cfe06114473f ]

Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.

Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load

[ Upstream commit cf38e7691c85f1b09973b22a0b89bf1e1228d2f9 ]

When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver
needs to be loaded manually, for the lack of module alias.
This causes unintended resets in cases where watchdog timer is
set-up by bootloader and the driver is not explicitly loaded.
Add MODULE_ALIAS() to load the driver automatically at boot and
avoid this issue.

Fixes: 87a1ef8058d9 ("watchdog: add Intel MID watchdog driver support")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf top: Don't pass an ERR_PTR() directly to perf_session__delete()

[ Upstream commit ef23cb593304bde0cc046fd4cc83ae7ea2e24f16 ]

While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:

perf_session__delete(ERR_PTR(-1))

Resulting in:

  (gdb) run lock contention
  Starting program: /root/bin/perf lock contention
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  Initializing perf session failed

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  2858 if (!session->auxtrace)
  (gdb) p session
  $1 = (struct perf_session *) 0xffffffffffffffff
  (gdb) bt
  #0  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  #1  0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
  #2  0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
  #3  0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
  #4  0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
  #5  0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
  #6  0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
  #7  0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
  (gdb)

So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.

The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.

Fixes: 6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events: Drop STORES_PER_INST metric event for power10 platform

[ Upstream commit 4836b9a85ef148c7c9779b66fab3f7279e488d90 ]

Drop STORES_PER_INST metric event for the power10 platform, as the
metric expression of STORES_PER_INST metric event using dropped event
PM_ST_FIN.

Fixes: 3ca3af7d1f230d1f ("perf vendor events power10: Add metric events JSON file for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events: Drop some of the JSON/events for power10 platform

[ Upstream commit e104df97b8dcfbab2e42de634b99bf03f0805d85 ]

Drop some of the JSON/events for power10 platform due to counter
data mismatch.

Fixes: 32daa5d7899e0343 ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-2-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events: Update the JSON/events descriptions for power10 platform

[ Upstream commit 3286f88f31da060ac2789cee247153961ba57e49 ]

Update the description for some of the JSON/events for power10 platform.

Fixes: 32daa5d7899e0343 ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/virt: Drop unnecessary check on extended CPUID level in cpu_has_svm()

[ Upstream commit 5df8ecfe3632d5879d1f154f7aa8de441b5d1c89 ]

Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware.  Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.

Fixes: 682a8108872f ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf annotate bpf: Don't enclose non-debug code with an assert()

[ Upstream commit 979e9c9fc9c2a761303585e07fe2699bdd88182f ]

In 616b14b47a86d880 ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.

In dd317df072071903 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.

Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:

  $ perf annotate bpf_prog_5280546344e3f45c_kfree_skb

was returning:

  case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
     scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");

This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.

This combination made this libopcode function not to be called:

        assert(bfd_check_format(bfdf, bfd_object));

Changing it to:

if (!bfd_check_format(bfdf, bfd_object))
abort();

Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.

So stop using assert() on it, just call it and abort if it fails.

Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.

With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:

  ⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb   | head
  No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
  Samples: 12  of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
  bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
  Percent      int kfree_skb(struct trace_event_raw_kfree_skb *args) {
                 nop
   33.33         xchg   %ax,%ax
                 push   %rbp
                 mov    %rsp,%rbp
                 sub    $0x180,%rsp
                 push   %rbx
                 push   %r13
  ⬢[acme@toolbox perf-tools-next]$

Fixes: 6987561c9e86eace ("perf annotate: Enable annotation of BPF programs")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohamed Mahmoud <mmahmoud@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: tca6416-keypad - fix interrupt enable disbalance

[ Upstream commit cc141c35af873c6796e043adcb820833bd8ef8c5 ]

The driver has been switched to use IRQF_NO_AUTOEN, but in the error
unwinding and remove paths calls to enable_irq() were left in place, which
will lead to an incorrect enable counter value.

Fixes: bcd9730a04a1 ("Input: move to use request_irq by IRQF_NO_AUTOEN flag")
Link: https://lore.kernel.org/r/20230724053024.352054-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: tca6416-keypad - always expect proper IRQ number in i2c client

[ Upstream commit 687fe7dfb736b03ab820d172ea5dbfc1ec447135 ]

Remove option having i2c client contain raw gpio number instead of proper
IRQ number. There are no users of this facility in mainline and it will
allow cleaning up the driver code with regard to wakeup handling, etc.

Link: https://lore.kernel.org/r/20230724053024.352054-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: cc141c35af87 ("Input: tca6416-keypad - fix interrupt enable disbalance")
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: gpio_backlight: Drop output GPIO direction check for initial power state

[ Upstream commit fe1328b5b2a087221e31da77e617f4c2b70f3b7f ]

So, let's drop output GPIO direction check and only check GPIO value to set
the initial power state.

Fixes: 706dc68102bc ("backlight: gpio: Explicitly set the direction of the GPIO")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230721093342.1532531-1-victor.liu@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: atmel-tcb: Fix resource freeing in error path and remove

[ Upstream commit c11622324c023415fb69196c5fc3782d2b8cced0 ]

Several resources were not freed in the error path and the remove
function. Add the forgotten items.

Fixes: 34cbcd72588f ("pwm: atmel-tcb: Add sama5d2 support")
Fixes: 061f8572a31c ("pwm: atmel-tcb: Switch to new binding")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: atmel-tcb: Harmonize resource allocation order

[ Upstream commit 0323e8fedd1ef25342cf7abf3a2024f5670362b8 ]

Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: c11622324c02 ("pwm: atmel-tcb: Fix resource freeing in error path and remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: atmel-tcb: Convert to platform remove callback returning void

[ Upstream commit 9609284a76978daf53a54e05cff36873a75e4d13 ]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: c11622324c02 ("pwm: atmel-tcb: Fix resource freeing in error path and remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Really free the evsel->priv area

[ Upstream commit 7962ef13651a9163f07b530607392ea123482e8a ]

In 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.

Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.

Also use the pre-existing evsel_trace__delete() function.

This resolves these leaks, detected with:

  $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin

  =================================================================
  ==481565==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
      #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
      #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
      #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
      #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
      #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
      #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
      #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
      #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
      #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
      #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
      #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
      #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
      #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
      #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
      #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
      #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
      #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
      #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
      #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
      #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
      #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
      #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
      #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
      #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)

  SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
  [root@quaco ~]#

With this we plug all leaks with "perf trace sleep 1".

Fixes: 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in evsel->priv")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Use zfree() to reduce chances of use after free

[ Upstream commit 9997d5dd177c52017fa0541bf236a4232c8148e6 ]

Do defensive programming by using zfree() to initialize freed pointers
to NULL, so that eventual use after free result in a NULL pointer deref
instead of more subtle behaviour.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 7962ef13651a ("perf trace: Really free the evsel->priv area")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: iqs7222 - configure power mode before triggering ATI

[ Upstream commit 2e00b8bf5624767f6be7427b6eb532524793463e ]

If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.

Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.

The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.

Fixes: 1e4189d8af27 ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpHc2Ji9qR25r2@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: fix possible buffer overflow

[ Upstream commit a3b7039bb2b22fcd2ad20d59c00ed4e606ce3754 ]

Buffer 'new_argv' is accessed without bound check after accessing with
bound check via 'new_argc' index.

Fixes: e298f3b49def ("kconfig: add built-in function support")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: qcom-ipcc: fix incorrect num_chans counting

[ Upstream commit a493208079e299aefdc15169dc80e3da3ebb718a ]

Breaking out early when a match is found leads to an incorrect num_chans
value when more than one ipcc mailbox channel is used by the same device.

Fixes: e9d50e4b4d04 ("mailbox: qcom-ipcc: Dynamic alloc for channel arrangement")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: low-memory forced flush fixes

[ Upstream commit b74cd55aa9a9d0aca760028a51343ec79812e410 ]

First, function gfs2_ail_flush_reqd checks the SDF_FORCE_AIL_FLUSH flag
to determine if an AIL flush should be forced in low-memory situations.
However, it also immediately clears the flag, and when called repeatedly
as in function gfs2_logd, the flag will be lost.  Fix that by pulling
the SDF_FORCE_AIL_FLUSH flag check out of gfs2_ail_flush_reqd.

Second, function gfs2_writepages sets the SDF_FORCE_AIL_FLUSH flag
whether or not enough pages were written.  If enough pages could be
written, flushing the AIL is unnecessary, though.

Third, gfs2_writepages doesn't wake up logd after setting the
SDF_FORCE_AIL_FLUSH flag, so it can take a long time for logd to react.
It would be preferable to wake up logd, but that hurts the performance
of some workloads and we don't quite understand why so far, so don't
wake up logd so far.

Fixes: b066a4eebd4f ("gfs2: forcibly flush ail to relieve memory pressure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Switch to wait_event in gfs2_logd

[ Upstream commit 6df373b09b1dcf2f7d579f515f653f89a896d417 ]

In gfs2_logd(), switch from an open-coded wait loop to
wait_event_interruptible_timeout().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: b74cd55aa9a9 ("gfs2: low-memory forced flush fixes")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm_crb: Fix an error handling path in crb_acpi_add()

[ Upstream commit 9c377852ddfdc557b1370f196b0cfdf28d233460 ]

Some error paths don't call acpi_put_table() before returning.
Branch to the correct place instead of doing some direct return.

Fixes: 4d2732882703 ("tpm_crb: Add support for CRB devices based on Pluton")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Matthew Garrett <mgarrett@aurora.tech>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: do not run depmod for 'make modules_sign'

[ Upstream commit 2429742e506a2b5939a62c629c4a46d91df0ada8 ]

Commit 961ab4a3cd66 ("kbuild: merge scripts/Makefile.modsign to
scripts/Makefile.modinst") started to run depmod at the end of
'make modules_sign'.

Move the depmod rule to scripts/Makefile.modinst and run it only when
$(modules_sign_only) is empty.

Fixes: 961ab4a3cd66 ("kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: rpm-pkg: define _arch conditionally

[ Upstream commit 233046a2afd12a4f699305b92ee634eebf1e4f31 ]

Commit 3089b2be0cce ("kbuild: rpm-pkg: fix build error when _arch is
undefined") does not work as intended; _arch is always defined as
$UTS_MACHINE.

The intention was to define _arch to $UTS_MACHINE only when it is not
defined.

Fixes: 3089b2be0cce ("kbuild: rpm-pkg: fix build error when _arch is undefined")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: deal with integer overflows in kmalloc_reserve()

commit 915d975b2ffa58a14bfcf16fafe00c41315949ff upstream.

Blamed commit changed:
    ptr = kmalloc(size);
    if (ptr)
      size = ksize(ptr);

to:
    size = kmalloc_size_roundup(size);
    ptr = kmalloc(size);

This allowed various crash as reported by syzbot [1]
and Kyle Zeng.

Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.

kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.

kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.

Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff

We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).

This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.

[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554

CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584

Fixes: 12d6c1d3a2ad ("skbuff: Proactively round up to kmalloc bucket size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Ajay: Regenerated the patch for v6.1.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: factorize code in kmalloc_reserve()

commit 5c0e820cbbbe2d1c4cea5cd2bfc1302c123436df upstream.

All kmalloc_reserve() callers have to make the same computation,
we can factorize them, to prepare following patch in the series.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Ajay: Regenerated the patch for v6.1.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: remove osize variable in __alloc_skb()

commit 65998d2bf857b9ae5acc1f3b70892bd1b429ccab upstream.

This is a cleanup patch, to prepare following change.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Ajay: Regenerated the patch for v6.1.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: add SKB_HEAD_ALIGN() helper

commit 115f1a5c42bdad9a9ea356fc0b4a39ec7537947f upstream.

We have many places using this expression:

 SKB_DATA_ALIGN(sizeof(struct skb_shared_info))

Use of SKB_HEAD_ALIGN() will allow to clean them.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Ajay: Regenerated the patch for v6.1.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Skip MHI reset if device is in RDDM

commit cabce92dd805945a090dc6fc73b001bb35ed083a upstream.

In RDDM EE, device can not process MHI reset issued by host. In case of MHI
power off, host is issuing MHI reset and polls for it to get cleared until
it times out. Since this timeout can not be avoided in case of RDDM, skip
the MHI reset in this scenarios.

Cc: <stable@vger.kernel.org>
Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1684390959-17836-1-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info

commit 96562c45af5c31b89a197af28f79bfa838fb8391 upstream.

It is an almost improbable error case but when page allocating loop in
nfs4_get_device_info() fails then we should only free the already
allocated pages, as __free_page() can't deal with NULL arguments.

Found by Linux Verification Center (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix a potential data corruption

commit 88975a55969e11f26fe3846bf4fbf8e7dc8cbbd4 upstream.

We must ensure that the subrequests are joined back into the head before
we can retransmit a request. If the head was not on the commit lists,
because the server wrote it synchronously, we still need to add it back
to the retransmission list.
Add a call that mirrors the effect of nfs_cancel_remove_inode() for
O_DIRECT.

Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: mss-sc7180: fix missing resume during probe

commit e2349da0fa7ca822cda72f427345b95795358fe7 upstream.

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 8def929c4097 ("clk: qcom: Add modem clock controller driver for SC7180")
Cc: stable@vger.kernel.org # 5.7
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: q6sstop-qcs404: fix missing resume during probe

commit 97112c83f4671a4a722f99a53be4e91fac4091bc upstream.

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 6cdef2738db0 ("clk: qcom: Add Q6SSTOP clock controller for QCS404")
Cc: stable@vger.kernel.org # 5.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: lpasscc-sc7280: fix missing resume during probe

commit 66af5339d4f8e20c6d89a490570bd94d40f1a7f6 upstream.

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Cc: stable@vger.kernel.org # 5.16
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: dispcc-sm8450: fix runtime PM imbalance on probe errors

commit b0f3d01bda6c3f6f811e70f76d2040ae81f64565 upstream.

Make sure to decrement the runtime PM usage count before returning in
case regmap initialisation fails.

Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450")
Cc: stable@vger.kernel.org # 6.1
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: qmi_encdec: Restrict string length in decode

commit 8d207400fd6b79c92aeb2f33bb79f62dff904ea2 upstream.

The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding.

Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230801064712.3590128-1-quic_ipkumar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock

commit 1583694bb4eaf186f17131dbc1b83d6057d2749b upstream.

The pll0_vote clock definitely should have pll0 as a parent (instead of
pll8).

Fixes: 7792a8d6713c ("clk: mdm9615: Add support for MDM9615 Clock Controllers")
Cc: stable@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: pll14xx: align pdiv with reference manual

commit 37cfd5e457cbdcd030f378127ff2d62776f641e7 upstream.

The PLL14xx hardware can be found on i.MX8M{M,N,P} SoCs and always come
with a 6-bit pre-divider. Neither the reference manuals nor the
datasheets of these SoCs do mention any restrictions. Furthermore the
current code doesn't respect the restrictions from the comment too.

Therefore drop the restriction and align the max pre-divider (pdiv)
value to 63 to get more accurate frequencies.

Fixes: b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates")
Cc: stable@vger.kernel.org
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20230807084744.1184791-1-m.felsch@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz

commit 72d00e560d10665e6139c9431956a87ded6e9880 upstream.

Since commit b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates"),
the driver has the ability to dynamically compute PLL parameters to
approximate the requested rates. This is not always used, because the
logic is as follows:

  - Check if the target rate is hardcoded in the frequency table
  - Check if varying only kdiv is possible, so switch over is glitch free
  - Compute rate dynamically by iterating over pdiv range

If we skip the frequency table for the 1443x PLL, we find that the
computed values differ to the hardcoded ones. This can be valid if the
hardcoded values guarantee for example an earlier lock-in or if the
divisors are chosen, so that other important rates are more likely to
be reached glitch-free.

For rates (393216000 and 361267200, this doesn't seem to be the case:
They are only approximated by existing parameters (393215995 and
361267196 Hz, respectively) and they aren't reachable glitch-free from
other hardcoded frequencies. Dropping them from the table allows us
to lock-in to these frequencies exactly.

This is immediately noticeable because they are the assigned-clock-rates
for IMX8MN_AUDIO_PLL1 and IMX8MN_AUDIO_PLL2, respectively and a look
into clk_summary so far showed that they were a few Hz short of the target:

imx8mn-board:~# grep audio_pll[12]_out /sys/kernel/debug/clk/clk_summary
audio_pll2_out           0        0        0   361267196 0     0  50000   N
audio_pll1_out           1        1        0   393215995 0     0  50000   Y

and afterwards:

imx8mn-board:~# grep audio_pll[12]_out /sys/kernel/debug/clk/clk_summary
audio_pll2_out           0        0        0   361267200 0     0  50000   N
audio_pll1_out           1        1        0   393216000 0     0  50000   Y

This change is equivalent to adding following hardcoded values:

  /*               rate     mdiv  pdiv  sdiv   kdiv */
  PLL_1443X_RATE(393216000, 655,    5,    3,  23593),
  PLL_1443X_RATE(361267200, 497,   33,    0, -16882),

Fixes: 053a4ffe2988 ("clk: imx: imx8mm: fix audio pll setting")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230807084744.1184791-2-m.felsch@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: clock: xlnx,versal-clk: drop select:false

commit 172044e30b00977784269e8ab72132a48293c654 upstream.

select:false makes the schema basically ignored and not effective, which
is clearly not what we want for a device binding.

Fixes: 352546805a44 ("dt-bindings: clock: Add bindings for versal clock driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230728165923.108589-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: fix address_space_handler() argument

commit d5301c90716a8e20bc961a348182daca00c8e8f0 upstream.

First argument of acpi_*_address_space_handler() APIs is acpi_handle of
the device, which is incorrectly passed in driver ->remove() path here.
Fix it by passing the appropriate argument and while at it, make both
API calls consistent using ACPI_HANDLE().

Fixes: a0b028597d59 ("pinctrl: cherryview: Add support for GMMR GPIO opregion")
Cc: stable@vger.kernel.org
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: update desired access while requesting for directory lease

commit b6d44d42313baa45a81ce9b299aeee2ccf3d0ee1 upstream.

We read and cache directory contents when we get directory
lease, so we should ask for read permission to read contents
of directory.

Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: led: Reduce CPU overhead for disk & lan LED computation

commit 358ad816e52d4253b38c2f312e6b1cbd89e0dbf7 upstream.

Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.

Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: led: Fix LAN receive and transmit LEDs

commit 4db89524b084f712a887256391fc19d9f66c8e55 upstream.

Fix the LAN receive and LAN transmit LEDs, which where swapped
up to now.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/test_meminit: allocate pages up to order MAX_ORDER

commit efb78fa86e95832b78ca0ba60f3706788a818938 upstream.

test_pages() tests the page allocator by calling alloc_pages() with
different orders up to order 10.

However, different architectures and platforms support different maximum
contiguous allocation sizes.  The default maximum allocation order
(MAX_ORDER) is 10, but architectures can use CONFIG_ARCH_FORCE_MAX_ORDER
to override this.  On platforms where this is less than 10, test_meminit()
will blow up with a WARN().  This is expected, so let's not do that.

Replace the hardcoded "10" with the MAX_ORDER macro so that we test
allocations up to the expected platform limit.

Link: https://lkml.kernel.org/r/20230714015238.47931-1-ajd@linux.ibm.com
Fixes: 5015a300a522 ("lib: introduce test_meminit module")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb_vmemmap: fix a race between vmemmap pmd split

commit 3ce2c24cb68f228590a053d6058a5901cd31af61 upstream.

The local variable @page in __split_vmemmap_huge_pmd() to obtain a pmd
page without holding page_table_lock may possiblely get the page table
page instead of a huge pmd page.

The effect may be in set_pte_at() since we may pass an invalid page
struct, if set_pte_at() wants to access the page struct (e.g.
CONFIG_PAGE_TABLE_CHECK is enabled), it may crash the kernel.

So fix it.  And inline __split_vmemmap_huge_pmd() since it only has one
user.

Link: https://lkml.kernel.org/r/20230707033859.16148-1-songmuchun@bytedance.com
Fixes: d8d55f5616cf ("mm: sparsemem: use page table lock to protect kernel pmd operations")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: drop kmem.limit_in_bytes

commit 86327e8eb94c52eca4f93cfece2e29d1bf52acbf upstream.

kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been
deprecated since 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") merged in 5.16.  We haven't heard about any serious
users since then but it seems that the mere presence of the file is
causing more harm thatn good.  We (SUSE) have had several bug reports from
customers where Docker based containers started to fail because a write to
kmem.limit_in_bytes has failed.

This was unexpected because runc code only expects ENOENT (kmem disabled)
or EBUSY (tasks already running within cgroup).  So a new error code was
unexpected and the whole container startup failed.  This has been later
addressed by
https://github.com/opencontainers/runc/commit/52390d68040637dfc77f9fda6bbe70952423d380
so current Docker runtimes do not suffer from the problem anymore.  There
are still older version of Docker in use and likely hard to get rid of
completely.

Address this by wiping out the file completely and effectively get back to
pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration.

I would recommend backporting to stable trees which have picked up
58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes").

[mhocko@suse.com: restore _KMEM switch case]
Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz
Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

send channel sequence number in SMB3 requests after reconnects

commit 09ee7a3bf866c0fa5ee1914d2c65958559eb5b4c upstream.

The ChannelSequence field in the SMB3 header is supposed to be
increased after reconnect to allow the server to distinguish
requests from before and after the reconnect.  We had always
been setting it to zero.  There are cases where incrementing
ChannelSequence on requests after network reconnects can reduce
the chance of data corruptions.

See MS-SMB2 3.2.4.1 and 3.2.7.1

Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos

commit db67345716a52abb750ec8f76d6a5675218715f9 upstream.

It looks like txdv-skew-psec is a typo from a copy+paste. txdv-skew-psec
is not present in the PHY bindings nor is it in the driver.

Correct to txen-skew-psec which is clearly what it was meant to be.

Given that the default for txen-skew-psec is 0, and the device tree is
only trying to set it to 0 anyway, there should not be any functional
change from this fix.

Fixes: 361b0dcbd7f9 ("arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet")
Fixes: 6494e4f90503 ("arm64: dts: renesas: rzg2ul-smarc-som: Enable Ethernet on SMARC platform")
Fixes: ce0c63b6a5ef ("arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK")
Cc: stable@vger.kernel.org # 6.1.y
Reported-by: Tomohiro Komagata <tomohiro.komagata.aj@renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230609221136.7431-1-chris.paterson2@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: turingcc-qcs404: fix missing resume during probe

commit a9f71a033587c9074059132d34c74eabbe95ef26 upstream.

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 892df0191b29 ("clk: qcom: Add QCS404 TuringCC")
Cc: stable@vger.kernel.org # 5.2
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tegra: Fix SFC conversion for few rates

commit d900d9a435ca95a386f49424f3689cd17ec201da upstream.

Sample rate conversions for rates greater than 48kHz are found to be
failing. It means x->y conversions fail when either x or y is greater
than 48kHz.

This happens because, tegra210_sfc_rate_to_idx() returns incorrect
index for rates greater than 48kHz. This actually depends on the
tegra210_sfc_rates[] array and it is not in sync with frequency
values of SFC TX/RX register. To be precise, 64kHz entry is missing
in above array defined in the driver. Due to this wrong index is
returned and this results in incorrect programming of coefficients.

To fix this, align the tegra210_sfc_rates[] array with SFC register
specification and thus add 64kHz entry to it. Also, the coefficient
table is updated to reflect that none of the conversions are supported
for 64kHz.

Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/Message-Id:
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix DRAM init on AST2200

commit 4cfe75f0f14f044dae66ad0e6eea812d038465d9 upstream.

Fix the test for the AST2200 in the DRAM initialization. The value
in ast->chip has to be compared against an enum constant instead of
a numerical value.

This bug got introduced when the driver was first imported into the
kernel.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: camcc-sc7180: fix async resume during probe

commit c948ff727e25297f3a703eb5349dd66aabf004e4 upstream.

To make sure that the controller is runtime resumed and its power domain
is enabled before accessing its registers during probe, the synchronous
runtime PM interface must be used.

Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Cc: stable@vger.kernel.org # 5.11
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev/ep93xx-fb: Do not assign to struct fb_info.dev

commit f90a0e5265b60cdd3c77990e8105f79aa2fac994 upstream.

Do not assing the Linux device to struct fb_info.dev. The call to
register_framebuffer() initializes the field to the fbdev device.
Drivers should not override its value.

Fixes a bug where the driver incorrectly decreases the hardware
device's reference counter and leaks the fbdev device.

v2:
* add Fixes tag (Dan)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 88017bda96a5 ("ep93xx video driver")
Cc: <stable@vger.kernel.org> # v2.6.32+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-15-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

null_blk: fix poll request timeout handling

commit 5a26e45edb4690d58406178b5a9ea4c6dcf2c105 upstream.

When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]

BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
 ? null_timeout_rq+0x4e/0x91
 blk_mq_handle_expired+0x31/0x4b
 bt_iter+0x68/0x84
 ? bt_tags_iter+0x81/0x81
 __sbitmap_for_each_set.constprop.0+0xb0/0xf2
 ? __blk_mq_complete_request_remote+0xf/0xf
 bt_for_each+0x46/0x64
 ? __blk_mq_complete_request_remote+0xf/0xf
 ? percpu_ref_get_many+0xc/0x2a
 blk_mq_queue_tag_busy_iter+0x14d/0x18e
 blk_mq_timeout_work+0x95/0x127
 process_one_work+0x185/0x263
 worker_thread+0x1b5/0x227

This is indeed a race problem between null_timeout_rq() and null_poll().

null_poll() null_timeout_rq()
  spin_lock(&nq->poll_lock)
  list_splice_init(&nq->poll_list, &list)
  spin_unlock(&nq->poll_lock)

  while (!list_empty(&list))
    req = list_first_entry()
    list_del_init()
    ...
    blk_mq_add_to_batch()
    // req->rq_next = NULL
spin_lock(&nq->poll_lock)

// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)

spin_unlock(&nq->poll_lock)

Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.

Note this patch just fix the kernel panic when request timeout happen.

[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/

Fixes: 0a593fbbc245 ("null_blk: poll queue support")
Reported-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230901120306.170520-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix firmware resource tracking

commit e370b64c7db96384a0886a09a9d80406e4c663d7 upstream.

The storage was not draining I/Os and the work load was not spread out
across different CPUs evenly. This led to firmware resource counters
getting overrun on the busy CPU. This overrun prevented error recovery from
happening in a timely manner.

By switching the counter to atomic, it allows the count to be little more
accurate to prevent the overrun.

Cc: stable@vger.kernel.org
Fixes: da7c21b72aa8 ("scsi: qla2xxx: Fix command flush during TMF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Error code did not return to upper layer

commit 0ba0b018f94525a6b32f5930f980ce9b62b72e6f upstream.

TMF was returned with an error code. The error code was not preserved to be
returned to upper layer. Instead, the error code from the Marker was
returned.

Preserve error code from TMF and return it to upper layer.

Cc: stable@vger.kernel.org
Fixes: da7c21b72aa8 ("scsi: qla2xxx: Fix command flush during TMF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix smatch warn for qla_init_iocb_limit()

commit b496953dd0444001b12f425ea07d78c1f47e3193 upstream.

Fix indentation for warning reported by smatch:

drivers/scsi/qla2xxx/qla_init.c:4199 qla_init_iocb_limit() warn: inconsistent indenting

Fixes: efa74a62aaa2 ("scsi: qla2xxx: Adjust IOCB resource on qpair create")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Flush mailbox commands on chip reset

commit 6d0b65569c0a10b27c49bacd8d25bcd406003533 upstream.

Fix race condition between Interrupt thread and Chip reset thread in trying
to flush the same mailbox. With the race condition, the "ha->mbx_intr_comp"
will get an extra complete() call. The extra complete call create erroneous
mailbox timeout condition when the next mailbox is sent where the mailbox
call does not wait for interrupt to arrive. Instead, it advances without
waiting.

Add lock protection around the check for mailbox completion.

Cc: stable@vger.kernel.org
Fixes: b2000805a975 ("scsi: qla2xxx: Flush mailbox commands on chip reset")
Signed-off-by: Quinn Tran <quinn.tran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Remove unsupported ql2xenabledif option

commit e9105c4b7a9208a21a9bda133707624f12ddabc2 upstream.

User accidently passed module parameter ql2xenabledif=1 which is
unsupported. However, driver still initialized which lead to guard tag
errors during device discovery.

Remove unsupported ql2xenabledif=1 option and validate the user input.

Cc: stable@vger.kernel.org
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix TMF leak through

commit 5d3148d8e8b05f084e607ac3bd55a4c317a9f934 upstream.

Task management can retry up to 5 times when FW resource becomes bottle
neck. Between the retries, there is a short sleep.  Current code assumes
the chip has not reset or session has not changed.

Check for chip reset or session change before sending Task management.

Cc: stable@vger.kernel.org
Fixes: 9803fb5d2759 ("scsi: qla2xxx: Fix task management cmd failure")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>