drm/i915/display: move to_intel_frontbuffer to header

This will be used for some refactoring in other files, so move it
first.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201221090449.8288-2-jani.nikula@intel.com

drm/i915/display: move needs_modeset to an inline in header

This function is going to be used in a later change, so clean it
up first before moving it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201221090449.8288-1-jani.nikula@intel.com

drm/i915: Reduce duplicated switch cases in hpd code

With GEN11_HOTPLUG_CTL_LONG_DETECT(), SHOTPLUG_CTL_DDI_HPD_LONG_DETECT()
and ICP_TC_HPD_LONG_DETECT() taking the hpd_pin as their argument
we can remove some duplication in the long_detect() switch statements.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204182309.14213-1-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915/display/tc: Only WARN once for bogus tc port flag

No need to spam syslog/console when we can ignore/fix the flag.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209211828.53193-1-sean@poorly.run

drm/i915/icl: Fix initing the DSI DSC power refcount during HW readout

For an enabled DSC during HW readout the corresponding power reference
is taken along the CRTC power domain references in
get_crtc_power_domains(). Remove the incorrect get ref from the DSI
encoder hook.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209153952.3397959-1-imre.deak@intel.com

drm/i915/bios: fill in DSC rc_model_size from VBT

The VBT fields match the DPCD data, so use the same helper.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/43fba75d89525413aed0bdbb082c26b09458bd46.1607429866.git.jani.nikula@intel.com

drm/dsc: add helper for calculating rc buffer size from DPCD

Add a helper for calculating the rc buffer size from the DCPD offsets
DP_DSC_RC_BUF_BLK_SIZE and DP_DSC_RC_BUF_SIZE.

Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c6aee22740fe7a8cf2b8e768bfda378850cf59a.1607429866.git.jani.nikula@intel.com

drm/i915/dsc: make rc_model_size an encoder defined value

Move the initialization of the rc_model_size from the common code into
encoder code, allowing different encoders to specify the size according
to their needs. Keep using the hard coded value in the encoders for now
to make this a non-functional change.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6843c4f6958619f7389180aa92fded7b9fdbb4ba.1607429866.git.jani.nikula@intel.com

drm/i915/dsc: configure hardware using specified rc_model_size

The rc_model_size is specified in the DSC config, and the hardware
programming should respect that instead of hard coding a value of 8192.

Regardless, the rc_model_size in DSC config is currently hard coded to
the same value, so this should have no impact, other than allowing the
use of other sizes as needed.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/27d86ad25832bbb985f6e996f3d02dca01a66895.1607429866.git.jani.nikula@intel.com

drm/dsc: use rc_model_size from DSC config for PPS

The PPS is supposed to reflect the DSC config instead of hard coding the
rc_model_size. Make it so.

Currently all users of drm_dsc_pps_payload_pack() hard code the size to
8192 also in the DSC config, so this change should have no impact, other
than allowing the drivers to use other sizes as needed.

Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3246aff585efcd728ee3dc96f52db5e46f6a162.1607429866.git.jani.nikula@intel.com

drm/i915/display/dp: Compute the correct slice count for VDSC on DP

This patch fixes the slice count computation algorithm
for calculating the slice count based on Peak pixel rate
and the max slice width allowed on the DSC engines.
We need to ensure slice count > min slice count req
as per DP spec based on peak pixel rate and that it is
greater than min slice count based on the max slice width
advertised by DPCD. So use max of these two.
In the prev patch we were using min of these 2 causing it
to violate the max slice width limitation causing a blank
screen on 8K@60.

Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com

drm/i915/dp: No need to poll FEC Enable Live bit

The Bspec does not mention polling the FEC Enable
Live status bit. That is only there for debug purposes.
So remove the polling from driver.

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125072634.27664-1-manasi.d.navare@intel.com

drm/i915: Disable outputs during unregister

Switch off the scanout during driver unregister, so we can shutdown the
HW immediately for unbind.

v2: Remove the old shutdown from remove, it should now be redundant.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204161601.20897-1-chris@chris-wilson.co.uk

drm/i915: Call kill_bigjoiner_slave() earlier

Let's do the kill_bigjoiner_slave() thing from
intel_bigjoiner_add_affected_crtcs() since it's related to
what we do there. This cleans up the logic in the
compute_config() loop a bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Properly flag modesets for all bigjoiner pipes

If either of the bigjoiner pipes needs a modeset then we need
a modeset on both pipes. Make it so.

v2: Split out the kill_bigjoiner_slave() change (Manasi)
    Add affected connectors/planes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Add intel_atomic_add_affected_planes()

drm_atomic_add_affected_planes() only considers planes which
are logically enabled in the uapi state. For bigjoiner we need
to consider planes logically enabled in the hw state. Add a
helper for that.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Track logically enabled planes for hw state

Currently crtc_state->uapi.plane_mask only tracks logically
enabled planes on the uapi level. For bigjoiner purposes
we want to do the same for the hw state. Let's follow the
pattern established by active_planes & co. here.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Add VRR_CTL_LINE_COUNT field to VRR_CTL register def

VRR_CTL register only had a GENMASK but no field prep
define for TRANS_VRR_CTL_LINE_COUNT field so add that

Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201202182727.26158-1-manasi.d.navare@intel.com

drm/i915/gem: Spring clean debugfs

Throw away all the debugfs entries that are not being actively used for
debugging/developing IGT. Note that a couple of these are already and
will remain available under the gt/

Files removed:
i915_gem_fence_regs
i915_gem_interrupt
i915_ring_freq_table
i915_context_status
i915_llc
i915_shrinker_info

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201202112140.16759-1-chris@chris-wilson.co.uk

drm/i915: Make intel_display_power_put_unchecked() an internal-only function

All the display power domain references are wakeref tracked now, so we
can mark intel_display_power_put_unchecked() as an internal function
(for suppressing wakeref tracking in non-debug builds).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-10-imre.deak@intel.com

drm/i915: Track power reference taken to disable power well functionality

Add wakeref tracking for the display power domain reference taken to
keep the display power well functionality disabled.

v2: Add missing wakeref zeroing to intel_power_domains_driver_remove()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-2-imre.deak@intel.com

drm/i915: Rename power_domains.wakeref to init_wakeref

Rename power_domains.wakeref to power_domains.init_wakeref to make the
use of this reference clearer. The next patch adds tracking for another
power reference user of the power_domains functionality.

While at it add a missing zero wakeref assert when setting the wakeref.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-8-imre.deak@intel.com

drm/i915: Track power reference taken for eDP VDD

Add wakeref tracking for the eDP encoders' AUX display power domain
references taken while the panel's VDD is enabled.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-7-imre.deak@intel.com

drm/i915/ddi: Track power reference taken for encoder main lane AUX use

Add wakeref tracking for the DDI encoders' main lane AUX display power
domain references.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-6-imre.deak@intel.com

drm/i915/ddi: Track power reference taken for encoder DDI IO use

Add wakeref tracking for the DDI encoders' DDI_IO display power domain
references.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-5-imre.deak@intel.com

drm/i915: Track power references taken for enabled CRTCs

Add wakeref tracking for display power domain references taken for
enabled CRTCs.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-4-imre.deak@intel.com

drm/i915: Factor out helpers to get/put a set of tracked power domains

Factor out helper functions to get/put a set of power domains that are
tracked using their wakeref handles. The same is needed by the next
patch adding tracking for enabled CRTC power domains.

v2: s/uint64_t/u64/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-1-imre.deak@intel.com

drm/i915: Use CRTC index consistently during getting/putting CRTC power domains

The for_each_oldnew_intel_crtc_in_state() iterator index does match
crtc->pipe, but using the same thing as array index when getting and
putting CRTC power domains makes things clearer.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-2-imre.deak@intel.com

drm/i915: refactor panel backlight control functions. (v2)

This moves the functions into static const instead of having
funcs and data in the same struct.

It leaves the power callback alone, as it is used in a different
manner.

v2: leave power callback alone (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130210945.31850-1-airlied@gmail.com

drm/i915/display: Record the plane update times for debugging

Since we try and estimate how long we require to update the registers to
perform a plane update, it is of vital importance that we measure the
distribution of plane updates to better guide our estimate. If we
underestimate how long it takes to perform the plane update, we may
slip into the next scanout frame causing a tear. If we overestimate, we
may unnecessarily delay the update to the next frame, causing visible
jitter.

Replace the warning that we exceed some arbitrary threshold for the
vblank update with a histogram for debugfs.

v2: Add a per-crtc debugfs entry so that the information is easier to
extract when testing individual CRTC, and so that it can be reset before
a test.

v3: Flip the graph on its side; creates space to label the time axis.

Updates: 4684
       |
   1us |
       |
   4us |********
       |**********
  16us |***********
       |*****
  66us |
       |
 262us |
       |
   1ms |
       |
   4ms |
       |
  17ms |
       |
Min update: 5918ns
Max update: 54781ns
Average update: 16628ns
Overruns > 250us: 0

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1982
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20201202212814.26320-1-chris@chris-wilson.co.uk

drm/i915: remove last traces of I915_READ(), I915_WRITE() and POSTING_READ()

Good riddance! Remove the macros and their remaining references in
comments.

The following functions should be used instead, depending on the use
case:

- intel_uncore_read(), intel_uncore_write(), intel_uncore_posting_read()

- intel_de_read(), intel_de_write(), intel_de_posting_read()

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-10-jani.nikula@intel.com

Revert "drm/i915/display/fbc: Disable fbc by default on TGL"

FBC can be re-enabled on TGL with WA of keeping it disabled
while PSR2 is enabled.

This reverts commit 2982ded2ff5ce0cf1a49bc39a526da182782b664.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-3-uma.shankar@intel.com

drm/i915/display/tgl: Disable FBC with PSR2

There are some corner cases wrt underrun when we enable
FBC with PSR2 on TGL. Recommendation from hardware is to
keep this combination disabled.

Bspec: 50422 HSD: 14010260002

v2: Added psr2 enabled check from crtc_state (Anshuman)
Added Bspec link and HSD referneces (Jose)

v3: Moved the logic to disable fbc to intel_fbc_update_state_cache
and removed the crtc->config usages, as per Ville's recommendation.

v4: Introduced a variable in fbc state_cache instead of the earlier
plane.visible WA, as suggested by Jose.

v5: Dropped an extra check for fbc in intel_fbc_enable and addressed
review comments by Jose.

v6: Move WA to end of function and added Jose's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-2-uma.shankar@intel.com

drm/i915/gvt: replace I915_WRITE with intel_uncore_write

Let's avoid adding new I915_WRITE uses while we try to get rid of them.

Fixes: 5f60b12edcd0 ("drm/i915/gvt: Save/restore HW status to support GVT suspend/resume")
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-9-jani.nikula@intel.com

drm/i915/lspcon: Do not send DRM infoframes to non-HDMI sinks

Non-HDMI sinks shouldn't be sent Dynamic Range and Mastering infoframes.
Check for that when using LSPCON.

v2: Addressed Ville's review comment.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-15-uma.shankar@intel.com

drm/i915/display: Implement DRM infoframe read for LSPCON

Implement Read back of HDR metadata infoframes i.e Dynamic Range
and Mastering Infoframe for LSPCON devices.

v2: Added proper bitmask of enabled infoframes as per Ville's
recommendation.

v3: Dropped a redundant wrapper as per Ville's comment.

v4: Dropped a redundant print, added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-14-uma.shankar@intel.com

drm/i915/display: Implement infoframes readback for LSPCON

Implemented Infoframes enabled readback for LSPCON devices.
This will help align the implementation with state readback
infrastructure.

v2: Added proper bitmask of enabled infoframes as per Ville's
recommendation.

v3: Added pcon specific infoframe types instead of using the HSW
one's, as recommended by Ville.

v4: Addressed Ville's review comment by adding HDMI infoframe
versions directly instead of DIP wrappers.

v5: Re-ordered the patches to avoid potential break in usage,
as suggested by Ville.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-13-uma.shankar@intel.com

drm/i915/lspcon: Create separate infoframe_enabled helper

Lspcon has Infoframes as well as DIP for HDR metadata(DRM Infoframe).
Create a separate mechanism for lspcon compared to HDMI in order to
address the same and ensure future scalability.

v2: Streamlined this as per Ville's suggestions, making sure that
HDMI infoframe versions are directly returned instead of a redundant
and confusing DIP overhead.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-12-uma.shankar@intel.com

drm/i915/display: Enable HDR for Parade based lspcon

Enable HDR for LSPCON based on Parade along with MCA.

v2: Added a helper for status reg as suggested by Ville.

v3: Removed a redundant variable, added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-11-uma.shankar@intel.com

drm/i915/display: Nuke bogus lspcon check

Dropped a irrelevant lspcon check from intel_hdmi_add_properties
function.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-10-uma.shankar@intel.com

drm/i915/display: Enable colorspace programming for LSPCON devices

Enable HDMI Colorspace for LSPCON based devices. Sending Colorimetry
data for HDR using AVI infoframe. LSPCON firmware expects this and though
SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device
which transfers the same to HDMI sink.

v2: Dropped state managed in drm core as per Jani Nikula's suggestion.

v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes,
as suggested by Ville.

v4: Finally fixed this with Ville's help, re-phrased the commit header
and description.

v5: Register HDMI colorspace for lspcon and move this to
intel_dp_add_properties as we can't create property at late_register.

Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-9-uma.shankar@intel.com

drm/i915: Split intel_attach_colorspace_property() into HDMI vs. DP variants

With LSPCON we use the AVI infoframe to convey the colorimetry
information (as opposed to DP MSA/SDP), so the property we expose
should match the values we can stuff into the infoframe. Ie. we
must use the HDMI variant of the property, even though we drive
LSPCON in PCON mode. To that end just split
intel_attach_colorspace_property() into HDMI and DP variants
and let the caller worry about which one it wants to use.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-8-uma.shankar@intel.com

drm/i915/display: Attach content type property for LSPCON

Content type is supported on HDMI sink devices. Attached the
property for the same for LSPCON based devices.

v2: Added the content type programming when we are attaching
the property to connector, as suggested by Ville.

v3: Need to attach content type on intel_dp_add_properties
as creating of new properties is not possible at late_register.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-7-uma.shankar@intel.com

drm/i915/display: Add a WARN for invalid output range and format

Add a WARN to rule out an invalid output range and format
combination. This is to align the lspcon code with
compute_avi_infoframes.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-6-uma.shankar@intel.com

drm/i915/display: Fixes quantization range for YCbCr output

This patch fixes the quantization range for YCbCr output on
Lspcon based devices.

v2: Re-phrased the description and added Ville's Rb.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-5-uma.shankar@intel.com

drm/i915/display: Attach HDR property for capable Gen9 devices

Attach HDR property for Gen9 devices with MCA LSPCON
chips.

v2: Cleaned HDR property attachment logic based on capability
as per Jani Nikula's suggestion.

v3: Fixed the HDR property attachment logic as per the new changes
by Kai-Feng to align with lspcon detection failure on some devices.

v4: Add HDR proprty in late_register to handle lspcon detection,
as suggested by Ville.

v5: Init Lspcon only if advertized from BIOS.

v6: Added a Todo to plan a cleanup later, added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-4-uma.shankar@intel.com

drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon

Gen9 hardware supports HDMI2.0 through LSPCON chips.
Extending HDR support for MCA LSPCON based GEN9 devices.

SOC will drive LSPCON as DP and send HDR metadata as standard
DP SDP packets. LSPCON will be set to operate in PCON mode,
will receive the metadata and create Dynamic Range and
Mastering Infoframe (DRM packets) and send it to HDR capable
HDMI sink devices.

v2: Re-used hsw infoframe write implementation for HDR metadata
for LSPCON as per Ville's suggestion.

v3: Addressed Jani Nikula's review comments.

v4: Addressed Ville's review comments, removed redundant wrapper
and checks, passed arguments instead of hardcodings.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-3-uma.shankar@intel.com

drm/i915/display: Add HDR Capability detection for LSPCON

LSPCON firmware exposes HDR capability through LPCON_CAPABILITIES
DPCD register. LSPCON implementations capable of supporting
HDR set HDR_CAPABILITY bit in LSPCON_CAPABILITIES to 1. This patch
reads the same, detects the HDR capability and adds this to
intel_lspcon struct.

v2: Addressed Jani Nikula's review comment and fixed the HDR
    capability detection logic

v3: Deferred HDR detection from lspcon_init (Ville)

v4: Addressed Ville's minor review comments, added his RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-2-uma.shankar@intel.com

drm/i915/display/psr: Calculate selective fetch plane registers

Add the calculations to set plane selective fetch registers depending
in the value of the area damaged.
It is still using the whole plane area as damaged but that will change
in next patches.

v2:
- fixed new_plane_state->uapi.dst.y2 typo in
intel_psr2_sel_fetch_update()
- do not shifthing new_plane_state->uapi.dst only src is in 16.16 format

BSpec: 55229
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130125750.17820-1-jose.souza@intel.com

drm/i915/irq: replace I915_READ()/WRITE() with intel_uncore_read()/write()

Arguably some of these should use intel_de_read() or intel_de_write(),
however not all. Prioritize I915_READ() and I915_WRITE() removal in
general over migrating to the pedantically correct replacements right
away.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-8-jani.nikula@intel.com

drm/i915/pm: replace I915_READ()/WRITE() with intel_uncore_read()/write()

Arguably some of these should use intel_de_read() or intel_de_write(),
however not all. Prioritize I915_READ() and I915_WRITE() removal in
general over migrating to the pedantically correct replacements right
away.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-7-jani.nikula@intel.com

drm/i915/suspend: replace I915_READ()/WRITE() with intel_de_read()/write()

Another straggler with I915_READ() and I915_WRITE() uses gone.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-6-jani.nikula@intel.com

drm/i915/debugfs: replace I915_READ() with intel_uncore_read()

Another straggler with I915_READ() uses gone.

Arguably some of these should use intel_de_read(), however not
all. Prioritize I915_READ() removal in general over migrating to the
pedantically correct replacement right away.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-5-jani.nikula@intel.com

drm/i915/debugfs: remove the i915_cache_sharing debugfs file

The i915_cache_sharing file is a debugfs interface for gen 6-7 with no
validation or user. Remove it.

This also removes the last I915_WRITE() use in i915_debugfs.c.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-4-jani.nikula@intel.com

drm/i915/cdclk: prefer intel_de_write() over I915_WRITE()

Let's try to not add new ones while we're phasing out I915_READ() and
I915_WRITE().

Fixes: 27a6bc802bd9 ("drm/i915/dg1: Initialize RAWCLK properly")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-3-jani.nikula@intel.com

drm/i915: remove last traces of I915_READ_FW() and I915_WRITE_FW()

Good riddance! Remove the macros and their remaining references in
comments.

intel_uncore_read_fw() and intel_uncore_write_fw() should be used
instead.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-2-jani.nikula@intel.com

drm/i915/debugfs: remove RPS autotuning details from i915_rps_boost_info

The information is no longer relevant, so remove it. This also removes
the last users of I915_READ_FW()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-1-jani.nikula@intel.com

drm/i915/perf: also include Gen11 in OATAILPTR workaround

CI shows this workaround is also needed on Gen11.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 059a0beb486344 ("drm/i915/perf: workaround register corruption in OATAILPTR")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126105155.540350-1-lionel.g.landwerlin@intel.com

drm/i915/display: Suppress "Combo PHY A HW state changed unexpectedly"

We know a problem exists in the ifwi shipped with the early
pre-production Tigerlake and DG1 prototypes, later revisions are fine.
However, CI still relies on the earlier ifwi and we grow tired of
the volume of warnings as we wait for replacements.

Since the warning is a bug, we do not want to lose the warning in its
entirety, so only suppress the warning for the platforms currently
exhibiting the issue.

Suggested-by: José Roberto de Souza <gitlab@gitlab.freedesktop.org>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2411
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127210059.10702-1-chris@chris-wilson.co.uk

drm/i915: remove trailing semicolon in macro definition

The macro use will already have a semicolon.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127162828.2660230-1-trix@redhat.com

Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"

We now use ilk_hpd_irq_setup for all GMCH platforms that do not have
hotplug. These are early gen3 and gen2 devices that now explode on boot
as they try to access non-existent registers.

Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk

drm/i915/display: Defer initial modeset until after GGTT is initialised

Prior to sanitizing the GGTT, the only operations allowed in
intel_display_init_nogem() are those to reserve the preallocated (and
active) regions in the GGTT leftover from the BIOS. Trying to allocate a
GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset)
may then conflict with other preallocated regions that have not yet been
protected.

Move the initial modesetting from the end of init_nogem to the beginning
of init so that any vma pinning (either framebuffers or DSB, for example),
is after the GGTT is ready to handle it.

This will prevent the DSB object from being destroyed too early:

[   53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345

[   53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G        W         5.10.0-rc5+ #12
[   53.449409] Call Trace:
[   53.449418]  dump_stack+0x9a/0xcc
[   53.449558]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449565]  print_address_description.constprop.0+0x3e/0x60
[   53.449577]  ? _raw_spin_lock_irqsave+0x4e/0x50
[   53.449718]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449849]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449857]  kasan_report.cold+0x1f/0x37
[   53.449993]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.450130]  i915_init_ggtt+0x324/0x9e0 [i915]
[   53.450273]  ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]
[   53.450281]  ? static_obj+0x69/0x80
[   53.450289]  ? lockdep_init_map_waits+0xa9/0x310
[   53.450431]  ? intel_wopcm_init+0x96/0x3d0 [i915]
[   53.450581]  ? i915_gem_init+0x75/0x2d0 [i915]
[   53.450720]  i915_gem_init+0x75/0x2d0 [i915]
[   53.450852]  i915_driver_probe+0x8c2/0x1210 [i915]
[   53.450993]  ? i915_pm_prepare+0x630/0x630 [i915]
[   53.451006]  ? check_chain_key+0x1e7/0x2e0
[   53.451025]  ? __pm_runtime_resume+0x58/0xb0
[   53.451157]  i915_pci_probe+0xa6/0x2b0 [i915]
[   53.451285]  ? i915_pci_remove+0x40/0x40 [i915]
[   53.451295]  ? lockdep_hardirqs_on_prepare+0x124/0x230
[   53.451302]  ? _raw_spin_unlock_irqrestore+0x42/0x50
[   53.451309]  ? lockdep_hardirqs_on+0xbf/0x130
[   53.451315]  ? preempt_count_sub+0xf/0xb0
[   53.451321]  ? _raw_spin_unlock_irqrestore+0x2f/0x50
[   53.451335]  pci_device_probe+0xf9/0x190
[   53.451350]  really_probe+0x17f/0x5b0
[   53.451365]  driver_probe_device+0x13a/0x1c0
[   53.451376]  device_driver_attach+0x82/0x90
[   53.451386]  ? device_driver_attach+0x90/0x90
[   53.451391]  __driver_attach+0xab/0x190
[   53.451401]  ? device_driver_attach+0x90/0x90
[   53.451407]  bus_for_each_dev+0xe4/0x140
[   53.451414]  ? subsys_dev_iter_exit+0x10/0x10
[   53.451423]  ? __list_add_valid+0x2b/0xa0
[   53.451440]  bus_add_driver+0x227/0x2e0
[   53.451454]  driver_register+0xd3/0x150
[   53.451585]  i915_init+0x92/0xac [i915]
[   53.451592]  ? 0xffffffffa0a20000
[   53.451598]  do_one_initcall+0xb6/0x3b0
[   53.451606]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[   53.451614]  ? __kasan_kmalloc.constprop.0+0xc2/0xd0
[   53.451627]  ? kmem_cache_alloc_trace+0x4a4/0x8e0
[   53.451634]  ? kasan_unpoison_shadow+0x33/0x40
[   53.451649]  do_init_module+0xf8/0x350
[   53.451662]  load_module+0x43de/0x47f0
[   53.451716]  ? module_frob_arch_sections+0x20/0x20
[   53.451731]  ? rw_verify_area+0x5f/0x130
[   53.451780]  ? __do_sys_finit_module+0x10d/0x1a0
[   53.451785]  __do_sys_finit_module+0x10d/0x1a0
[   53.451792]  ? __ia32_sys_init_module+0x40/0x40
[   53.451800]  ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0
[   53.451829]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   53.451835]  ? mark_held_locks+0x24/0x90
[   53.451856]  do_syscall_64+0x33/0x80
[   53.451863]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.451868] RIP: 0033:0x7fde09b4470d
[   53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48
[   53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d
[   53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f
[   53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[   53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded
[   53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150

[   53.451957] Allocated by task 345:
[   53.451995]  kasan_save_stack+0x1b/0x40
[   53.452001]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   53.452006]  kmem_cache_alloc+0x1cd/0x8d0
[   53.452146]  i915_vma_instance+0x126/0xb70 [i915]
[   53.452304]  i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915]
[   53.452446]  intel_dsb_prepare+0x14f/0x230 [i915]
[   53.452588]  intel_atomic_commit+0x183/0x690 [i915]
[   53.452730]  intel_initial_commit+0x2bc/0x2f0 [i915]
[   53.452871]  intel_modeset_init_nogem+0xa02/0x2af0 [i915]
[   53.452995]  i915_driver_probe+0x8af/0x1210 [i915]
[   53.453120]  i915_pci_probe+0xa6/0x2b0 [i915]
[   53.453125]  pci_device_probe+0xf9/0x190
[   53.453131]  really_probe+0x17f/0x5b0
[   53.453136]  driver_probe_device+0x13a/0x1c0
[   53.453142]  device_driver_attach+0x82/0x90
[   53.453148]  __driver_attach+0xab/0x190
[   53.453153]  bus_for_each_dev+0xe4/0x140
[   53.453158]  bus_add_driver+0x227/0x2e0
[   53.453164]  driver_register+0xd3/0x150
[   53.453286]  i915_init+0x92/0xac [i915]
[   53.453292]  do_one_initcall+0xb6/0x3b0
[   53.453297]  do_init_module+0xf8/0x350
[   53.453302]  load_module+0x43de/0x47f0
[   53.453307]  __do_sys_finit_module+0x10d/0x1a0
[   53.453312]  do_syscall_64+0x33/0x80
[   53.453318]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   53.453345] Freed by task 82:
[   53.453379]  kasan_save_stack+0x1b/0x40
[   53.453384]  kasan_set_track+0x1c/0x30
[   53.453389]  kasan_set_free_info+0x1b/0x30
[   53.453394]  __kasan_slab_free+0x112/0x160
[   53.453399]  kmem_cache_free+0xb2/0x3f0
[   53.453536]  i915_gem_flush_free_objects+0x31a/0x3b0 [i915]
[   53.453542]  process_one_work+0x519/0x9f0
[   53.453547]  worker_thread+0x75/0x5c0
[   53.453552]  kthread+0x1da/0x230
[   53.453557]  ret_from_fork+0x22/0x30

[   53.453584] The buggy address belongs to the object at ffff88811b1e8040
                which belongs to the cache i915_vma of size 968
[   53.453692] The buggy address is located 48 bytes inside of
                968-byte region [ffff88811b1e8040, ffff88811b1e8408)
[   53.453792] The buggy address belongs to the page:
[   53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8
[   53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0
[   53.453853] flags: 0x8000000000010200(slab|head)
[   53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340
[   53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000
[   53.453870] page dumped because: kasan: bad access detected

[   53.453895] Memory state around the buggy address:
[   53.453944]  ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   53.454011]  ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[   53.454146]                                                              ^
[   53.454211]  ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   53.454279]  ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   53.454347] ==================================================================
[   53.454414] Disabling lock debugging due to kernel taint
[   53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI
[   53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G    B   W         5.10.0-rc5+ #12
[   53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915]
[   53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8
[   53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286
[   53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f
[   53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160
[   53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000
[   53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0
[   53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160
[   53.454664] FS:  00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000
[   53.454672] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0
[   53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   53.454700] Call Trace:
[   53.454833]  ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]

Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125193032.29282-1-chris@chris-wilson.co.uk

Merge tag 'gvt-next-2020-11-23' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2020-11-23

- Fix host suspend/resume with vGPU (Colin)
- optimize idr init (Varma)
- Change intel_gvt_mpt as const (Julian)
- One comment error fix (Yan)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123090517.GC16939@zhen-hp.sh.intel.com

drm/i915/gvt: treat intel_gvt_mpt as const in gvt code

The current interface of intel_gvt_register_hypervisor() expects a
non-const pointer to struct intel_gvt_mpt, even though the mediator
never modifies (or should modifiy) the content of this struct.

Change the function signature and relevant struct members to const to
properly express the API's intent and allow instances of intel_gvt_mpt
to be allocated as const.

While I was here, I also made KVM's instance of this struct const to
reduce the number of writable function pointers in the kernel.

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201111172811.558443-1-julian.stecklina@cyberus-technology.de

drm/i915/dg1: Enable ports

For DG1 we have a little of mix up wrt to DDI/port names and indexes.
Bspec refers to the ports as DDIA, DDIB, DDI USBC1 and DDI USBC2
(besides the DDIA, DDIB, DDIC, DDID), but the previous naming is the
most unambiguous one. This means that for any register on Display Engine
we should use the index of A, B, D and E. However in some places this is
not true:

- VBT: uses C and D and have to be mapped to D/E

- IO/Combo: uses C and D, but we already differentiate those when
  we created the phy vs port distinction.

This additional mapping for VBT and phy are already covered in previous
patches, so now we can initialize all the DDIs as A, B, D and E.

v2: Squash previous patch enabling just ports A and B since most of the
pumbling code is already merged now

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117084836.2318234-1-lucas.demarchi@intel.com

drm/i915: Do not call hsw_set_frame_start_delay for dsi

This should fix the boot oops for dsi

v2:
* Fix indent (Manasi)
v3:
* Remove redundant condition (Matt Roper)

Fixes: 4e3cdb4535e7 ("drm/i915/dp: Master/Slave enable/disable sequence for bigjoiner")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119232615.23231-1-manasi.d.navare@intel.com

drm/i915/display: Whitespace cleanups

drivers/gpu/drm/i915/display/intel_display.c:3634 intel_find_initial_plane_obj() warn: inconsistent indenting
drivers/gpu/drm/i915/display/intel_display.c:15367 kill_bigjoiner_slave() warn: inconsistent indenting

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119090717.30687-1-chris@chris-wilson.co.uk

drm/i915/perf: workaround register corruption in OATAILPTR

After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.

When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.

The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.

This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df2859eb1 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com

drm/i915: Enable bigjoiner

Enough plumbing should be in place to throw the bigjoiner switch.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-16-manasi.d.navare@intel.com

drm/i915: Add bigjoiner state dump

Add a big of bigjoiner information to the state dump.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-15-manasi.d.navare@intel.com

drm/i915: Fix cursor src/dst rectangle with bigjoiner

We can't call drm_plane_state_src() this late for the slave plane since
it would consult the wrong uapi state. We've alreayd done the correct
uapi->hw copy earlier, so let's just preserve the unclipped src/dst
rects using a temp copy across the intel_atomic_plane_check_clipping()
call.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-14-manasi.d.navare@intel.com

drm/i915: Disable legacy cursor fastpath for bigjoiner

The legacy cursor fastpath code doesn't deal with bigjoiner.
Disable the fastpath for now.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-13-manasi.d.navare@intel.com

drm/i915: Add debugfs dumping for bigjoiner, v3.

Dump debugfs and planar links as well, this will make it easier to debug
when things go wrong.

v4:
* Rebase
Changes since v1:
- Report planar slaves as such, now that we have the plane_state switch.
Changes since v2:
- Rebase on top of the new plane format dumping

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-12-manasi.d.navare@intel.com

drm/i915: Add bigjoiner aware plane clipping checks

We need to look at hw.fb for the framebuffer, and add the translation
for the slave_plane_state. With these changes we set the correct
rectangle on the bigjoiner slave, and don't set incorrect
src/dst/visibility on the slave plane.

v2:
* Manual rebase (Manasi)

v3:
* hw.rotation instead of uapi.rotation (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-11-manasi.d.navare@intel.com

drm/i915: Get the uapi state from the correct plane when bigjoiner is used

When using bigjoiner userspace is only controlling the "master"
plane, so use its uapi state for the "slave" plane as well.

hw.crtc needs a bit of magic since we don't want to copy that from
the uapi state (as it points to the wrong pipe for the "slave
" plane). Instead we pass the right crtc in explicitly but only
assign it when the uapi state indicates the plane to be logically
enabled (ie. uapi.crtc != NULL).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-10-manasi.d.navare@intel.com

drm/i915: Add planes affected by bigjoiner to the state

Make sure both the bigjoiner "master" and "slave" plane are
in the state whenever either of them is in the state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-9-manasi.d.navare@intel.com

drm/i915: Add crtcs affected by bigjoiner to the state

Make sure both crtcs participating in the bigjoiner stuff
are in the state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-8-manasi.d.navare@intel.com

drm/i915: HW state readout for Bigjoiner case

Skip iterating over bigjoiner slaves, only the master has the state we
care about.

Add the width of the bigjoiner slave to the reconstructed fb.

Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.

And last, disable bigjoiner slave from primary if reconstruction fails.

v3:
* Fix the ddi_get_config slave error (Ankit Nautiyal)
v2:
* Unsupported bigjoiner config for initial fb (Ville)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* Don't do any hw->uapi state copy for bigjoiner slave
* We still have hw.mode so no need to pass it in
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-7-manasi.d.navare@intel.com

drm/i915/dp: Master/Slave enable/disable sequence for bigjoiner

Enabling is done in a special sequence and so should plane updates
be. Ideally the end user never notices the second pipe is used.

This way ideally everything will be tear free, and updates are
really atomic as userspace expects it.

This uses generic modeset_enables() calls like trans port sync
but still has special handling for disable since for slave we
should not disable things like encoder, plls that are not enabled
for  slave.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-6-manasi.d.navare@intel.com

drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave

Make vdsc work when no output is enabled. The big joiner needs VDSC
on the slave, so enable it and set the appropriate bits.
So remove encoder usage from dsc functions.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com

drm/i915: Try to make bigjoiner work in atomic check

 When the clock is higher than the dotclock, try with 2 pipes enabled.
 If we can enable 2, then we will go into big joiner mode, and steal
 the adjacent crtc.

 This only links the crtc's in software, no hardware or plane
 programming is done yet. Blobs are also copied from the master's
 crtc_state, so it doesn't depend at commit time on the other
 crtc_state.

v6:
* Enable dSC for any mode->hdisplay > 5120
v5:
* Remove intel_dp_max_dotclock (Manasi)
v4:
* Fixes in intel_crtc_compute_config (Ville)
v3:
* Manual Rebase (Manasi)
 Changes since v1:
 - Rename pipe timings to transcoder timings, as they are now different.
  Changes since v2:
 - Rework bigjoiner checks; always disable slave when recalculating
   master. No need to have a separate bigjoiner pass any more.
 - Use pipe_mode instead of transcoder_mode, to clean up the code.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* hskew isn't a thing
* Do the dsc compute if bigjoiner is enabled, not the other way around]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-4-manasi.d.navare@intel.com

drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.

Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.

v13:
* Allow bigjoiner if hdisplay >5120
v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville)
v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi)
v5:
* Increase max plane width to support 8K with bigjoiner (Maarten)
v4:
* Rebase (Manasi)

Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
  and split off the downstream and source checking to its own function.
  (Ville)
v3:
* Rebase (Manasi)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[vsyrjala:
* Keep bigjoiner disabled until everything is ready
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com

drm/i915: Copy the plane hw state directly for Y planes

When doing the plane state copy from the UV plane to the Y plane
let's just copy the hw state directly instead of using the original
uapi state. The UV plane has already had its uapi state copied into
its hw state, so this extra detour via the uapi state for the Y plane
is pointless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-2-manasi.d.navare@intel.com

drm/i915: Fix the DDI encoder names

I totally fumbled the ?: usage when generating the DDI encoder
names. Reverse the things that need reversing, and to make it
a bit less messy add a few macros to hide the arithmetic on the
port enums.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 2d709a5a624c ("drm/i915: Give DDI encoders even better names")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117154028.8516-1-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms

The WA specifies that we need to toggle a SDE chicken bit on and then
off as the final step in preparation for s0ix entry.

    Bspec: 33450
    Bspec: 8402

However, something is happening after we toggle the bit that causes
the WA to be invalidated. This makes dispcnlunit1_cp_xosc_clkreq
active being already in s0ix state i.e SLP_S0 counter incremented.
Tweaking the Wa_14010685332 by setting the bit on suspend and clearing
it on resume turns down the dispcnlunit1_cp_xosc_clkreq.
B.Spec has Documented this tweaked sequence of WA as an alternative.
Let keep this tweaked WA for Gen11 platforms and keep untweaked WA for
other platforms which never observed this issue.

v2 (MattR):
 - Change the comment on the workaround to give PCH names rather than
   platform names.  Although the bspec is setup to list workarounds by
   platform, the hardware team has confirmed that the actual issue being
   worked around here is something that was introduced back in the
   Cannon Lake PCH and carried forward to subsequent PCH's.
 - Extend the untweaked version of the workaround to include  PCH_CNP as
   well.  Note that since PCH_CNP is used to represent CMP, this will
   apply on CML and some variants of RKL too.
 - Cap the untweaked version of the workaround so that it won't apply to
   "fake" PCH's (i.e., DG1).  The issue we're working around really is
   an issue in the PCH itself, not the South Display, so it shouldn't
   apply when there isn't a real PCH.

v3:
 - use intel_de_rmw(). [Rodrigo]

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110121700.4338-1-anshuman.gupta@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Handle max_bpc==16

EDID can declare the maximum supported bpc up to 16,
and apparently there are displays that do so. Currently
we assume 12 bpc is tha max. Fix the assumption and
toss in a MISSING_CASE() for any other value we don't
expect to see.

This fixes modesets with a display with EDID max bpc > 12.
Previously any modeset would just silently fail on platforms
that didn't otherwise limit this via the max_bpc property.
In particular we don't add the max_bpc property to HDMI
ports on gmch platforms, and thus we would see the raw
max_bpc coming from the EDID.

I suppose we could already adjust this to also allow 16bpc,
but seeing as no current platform supports that there is
little point.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Relocate cnl_get_ddi_pll()

Move cnl_get_ddi_pll() into a better spot from between
icl_get_ddi_pll() and dg1_get_ddi_pll(). Also reorder
the calls to the skl and bxt functions because ocd.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109231239.17002-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Use actual readout results for .get_freq()

Currently the DPLL .get_freq() uses pll->state.hw_state which
is not the thing we actually read out (except during driver
load/resume). Outside of that pll->state.hw_state is just the
thing we committed last time around. During state check we
just read the thing into crtc_state->dpll_hw_state, so that
is what we should use for calculating the DPLL output frequency.

I think we used to do this so that the results of the readout
were actually used, but somehow it got changed when the
.get_freq() refactoring happened.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109231239.17002-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Move intel_dpll_get_hw_state() into the hsw+ platform specific functions

On icl+ we want to populate both crtc_state.{shared_dpll,dpll_hw_state}
and crtc_state.port_dplls[] during readout, whereas on pre-icl we
want to leave the latter stuff untouched. Rather than adding more ifs
into hsw_get_ddi_port_state() to copy the DPLL hw state around let's
just move the whole dpll readout into hsw_get_ddi_dpll() & co.
Slightly repetitive, but meh.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109231239.17002-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Introduce intel_dpll_get_hw_state()

Add a wrapper for the pll .get_hw_state() vfunc. Makes life
a bit less miserable when you don't have to worry where the
function pointer is stored.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109231239.17002-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Remove skl_adjusted_plane_pixel_rate()

Replace skl_adjusted_plane_pixel_rate() with the generic
intel_plane_pixel_rate(). The two should produce identical
results.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Store plane relative data rate in crtc_state

Store the relative data rate for planes in the crtc state
so that we don't have to use
intel_atomic_crtc_state_for_each_plane_state() to compute
it even for the planes that are no part of the current state.

Should probably just nuke this stuff entirely an use the normal
plane data rate instead. The two are slightly different since this
relative data rate doesn't factor in the actual pixel clock, so
it's a bit odd thing to even call a "data rate". And since the
watermarks are computed based on the actual data rate anyway
I don't really see what the point of this relative data rate
is. But that's for the future...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Precompute can_sagv for each wm level

In order to remove intel_atomic_crtc_state_for_each_plane_state()
from skl_crtc_can_enable_sagv() we can simply precompute whether
each wm level can tolerate the SAGV block time latency or not.

This has the nice side benefit that we remove the duplicated
wm level latency calculation. In fact the copy of that code
we had in skl_crtc_can_enable_sagv() didn't even handle
WaIncreaseLatencyIPCEnabled/Display WA #1141 whereas the copy
in skl_compute_plane_wm() did. So now we just have the one
copy which handles all the w/as.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Pimp the watermark documentation a bit

Document what each of the "raw" vs. "optimal" vs. "intermediate"
watermarks do.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-4-ville.syrjala@linux.intel.com

drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code

intel_atomic_crtc_state_for_each_plane_state() peeks at the
plane's current state without holding the plane's mutex, trusting
that the crtc's mutex will protect it. In practice that does work
since our planes can't move between pipes, but it sets a bad
example. intel_atomic_crtc_state_for_each_plane_state() also
relies on crtc_state.uapi.plane_mask which may be full of lies
when it comes to the bigjoiner stuff, so soon we can't use it as
is anyway. So best to just get rid of it entirely. Which we can
easily do by switching to the g4x/vlv "raw" watermark approach.

Later on we should even be able to move the "raw" watermark
computation into the normal .plane_check() code, leaving only
the merging/clamping of the final watermarks to the later
stages. But that will require adjusting the ilk+ wm code
similarly as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-3-ville.syrjala@linux.intel.com

drm/i915: Pass intel_atomic_state around

Pass the whole intel_atomic_state to skl_build_pipe_wm()
and skl_allocate_pipe_ddb() so we can start to iterate
stuff containerd in the commit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-2-ville.syrjala@linux.intel.com

drm/i915/dp: Add from_crtc_state to copy color blobs

No functional changes here, just adds a from_crtc_state
as a prep for bigjoiner

v2:
* More prep with intel_atomic_state (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113155656.17630-2-manasi.d.navare@intel.com

drm/i915: Pass intel_atomic_state instead of drm_atomic_state

No functional changes, to align with previous cleanups pass
intel_atomic_state instead of drm_atomic_state.
Also pass this intel_atomic_state with crtc_state to
some of the atomic_check functions.

v2:
* Squash some changes from next patch (Ville)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113155656.17630-1-manasi.d.navare@intel.com

drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split

With bigjoiner, there will be 2 pipes driving 2 halves of 1 transcoder,
because of this, we need a pipe_mode for various calculations, including
for example watermarks, plane clipping, etc.

v10:
* remove redundant pipe_mode assignment (Ville)
v9:
* pipe_mode in state dump nd state check (Ville)
v8:
* Add pipe_mode in readout in verify_crtc_state (Ville)
v7:
* Remove redundant comment (Ville)
* Just keep mode instead of pipe_mode (Ville)
v6:
* renaming in separate function, only pipe_mode here (Ville)
* Add description (Maarten)
v5:
* Rebase (Manasi)
v4:
* Manual rebase (Manasi)
v3:
* Change state to crtc_state, fix rebase err  (Manasi)
v2:
* Manual Rebase (Manasi)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
[vsyrjala:
* Fix state checker
* Fix state dump
* Use pipe_mode for linetime watermarks
* Make sure pipe_mode normal timings are correct since the
  silly ddb code uses them
* Drop the redundant pipe_mode copies from intel_modeset_pipe_config()
  and intel_crtc_copy_uapi_to_hw_state()
* Use drm_mode_copy() all over]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-7-ville.syrjala@linux.intel.com

drm/i915: Introduce intel_crtc_readout_derived_state()

Collect up a bunch of derived state "readout" into
a common helper, which we can call from both
intel_encoder_get_config() and intel_crtc_get_pipe_config().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-6-ville.syrjala@linux.intel.com