Yonghui Yu [Tue, 6 Feb 2018 15:14:32 +0000 (23:14 +0800)]
sdio: both pio&dma are supported for g12a
PD#156734: g12a: sdio: both pio&dma are supported.
Change-Id: I92d0961c94cf1a77867af92870d1781d89a3168d
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
huan.biao [Thu, 8 Feb 2018 02:14:32 +0000 (10:14 +0800)]
thermal: G12A: fix cpucore cooling devices driver.
PD#156734: fix cpucore cooling issue.
Change-Id: I9c1340e605d51df5eae8e49814f948981c9dc763
Signed-off-by: huan.biao <huan.biao@amlogic.com>
huan.biao [Sat, 3 Feb 2018 16:49:31 +0000 (00:49 +0800)]
thermal: G12A: tsensor and cooldev driver.
PD#156734: add thermal tsensor and cooling devices driver.
Change-Id: I22ea0e03692fbcf7da269330fde86e07f189c4e9
Signed-off-by: huan.biao <huan.biao@amlogic.com>
Brian Zhu [Wed, 7 Feb 2018 12:13:41 +0000 (20:13 +0800)]
ppmgr: enable for g12a
PD#156734: ppmgr: enable for g12a
Change-Id: Iaf5076f7c3c6f58dfd40be29ba7d19e8c6b9145b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Jiamin Ma [Wed, 7 Feb 2018 12:08:49 +0000 (20:08 +0800)]
unifykey: add unifykey description in g12a_skt dts
PD#156734: g12a bring up
Change-Id: Iae5bc74a1230df4d0c5025267b149e6a235a1681
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Yu Tu [Tue, 6 Feb 2018 05:08:00 +0000 (13:08 +0800)]
remote out: add irblaster config for G12A
PD#156734: remote out: modify irblaster read register from dts for G12A
Change-Id: I36d1c4ce8ce968f7955d55c0678670e7258889f1
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
weiming.liu [Tue, 6 Feb 2018 07:58:36 +0000 (15:58 +0800)]
lcd: update pll parameter
PD#156734: lcd: update pll parameter
Change-Id: Ie431c33abc794e043f07bd1bb9ff64d896f48f7f
Signed-off-by: weiming.liu <weiming.liu@amlogic.com>
Qiufang Dai [Sun, 4 Feb 2018 08:05:05 +0000 (16:05 +0800)]
clock: G12A: add hevcf, spicc clock
PD#156734: add hevcf, spicc clock
Change-Id: Ibe63b44e61058255b3b72ef9efaded765e262b0a
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
kuibao zhang [Fri, 2 Feb 2018 13:28:39 +0000 (21:28 +0800)]
BT: g12a_skt: initial host wake bt pin [1/1]
PD#156734: bt: g12a_skt: initial host wake bt pin
1.host wake bt pin (gpiox_19) should keep high when bt
lpm function is enabled, otherwise bt moudle would go
to sleep.
2.set this pin in dts
Change-Id: I401fa158bf11b60ef1a7727ea25e55f94cf273a8
Signed-off-by: kuibao zhang <kuibao.zhang@amlogic.com>
Bo Yang [Mon, 5 Feb 2018 15:02:47 +0000 (23:02 +0800)]
i2c: meson: set clk div for fast mode
PD#156734: i2c: meson: set clk div for fast mode
According to I2C-BUS Spec 2.1, in FAST-MODE, LOW period should be at
least 1.3uS, and HIGH period should be at lease 0.6. HIGH to LOW
ratio as 1 to 2 is more safe.
So in FAST-MODE, we should control the SCL low time.
And fix REG_SLAVE_DDR write mask.
Change-Id: I39ec81c67f543dfdf261d39e8da79489f2c79483
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
hong.guo [Mon, 5 Feb 2018 10:43:10 +0000 (18:43 +0800)]
CPUFREQ: modify cpufreq dts.
PD#156734: cpufreq: modify cpufreq dts.
Change-Id: I16113e3414a3e336cbd4c0eb869706dd3d22a15b
Signed-off-by: hong.guo <hong.guo@amlogic.com>
Yi Zhou [Sun, 4 Feb 2018 17:29:47 +0000 (01:29 +0800)]
hdmitx: bringup for g12a
PD#156734: bringup for g12a
1.use ioremap
2.enalbe hpd for the first time
Change-Id: I5375c8b7732f4dd552e7c7207b90d411aeacafbd
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Thu, 1 Feb 2018 16:24:35 +0000 (00:24 +0800)]
vout: add missed vout2_module macro definition protection
PD#156734: vout: add missed vout2_module macro definition protection
Change-Id: I141d05ec9f40e4b42eb39b72d069907aa4480a99
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Liang Yang [Sun, 4 Feb 2018 13:34:39 +0000 (21:34 +0800)]
nand: free controller when no nand inserted or error
PD#156734: nand : no nand or init error handle
Change-Id: I9a1383117db2021204826e04d36fb91ba4213126
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
hong.guo [Sun, 4 Feb 2018 05:46:10 +0000 (13:46 +0800)]
CPUFREQ: add dvfs cpufreq and latency.
PD#156734: cpufreq: add dvfs cpufreq cpufreq and latency.
Change-Id: I0d7c74e54b2e6dcbd949c1c59cce41deec5047f7
Signed-off-by: hong.guo <hong.guo@amlogic.com>
Yi Zhou [Sun, 4 Feb 2018 11:47:09 +0000 (19:47 +0800)]
hdmitx: eliminate unnecessary print
PD#156734: hdmitx: eliminate unnecessary print
Change-Id: Id79e6f14367f3c0201d1968a3d61168a47a14e3a
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
weiming.liu [Fri, 2 Mar 2018 07:36:27 +0000 (15:36 +0800)]
lcd: add g12a support
PD#156734: lcd: add lcd driver for g12a
Change-Id: Ib859dfdc2a1785c7e1e2ab506bf1dfd0cad55887
Signed-off-by: weiming.liu <weiming.liu@amlogic.com>
Bo Yang [Sun, 4 Feb 2018 09:07:44 +0000 (17:07 +0800)]
pwm: meson-g12a: fix pwm xtal
PD#156734: pwm: meson-g12a: fix pwm xtal
Fix pwm xtal.
And update pwm dts compatible.
Change-Id: I0314ed1b628abfe4a3e303ca827bdd50f2a2c2e8
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Nanxin Qin [Sun, 4 Feb 2018 08:55:25 +0000 (16:55 +0800)]
media: fixed the issure of mpeg12 playback.
PD#156734:
Change-Id: I87d814707d864a8fc81bcb35712ef0c25fea65db
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Bo Yang [Sun, 4 Feb 2018 08:45:16 +0000 (16:45 +0800)]
dts: meson-g12a: update hmditx i2c pinctrl
PD#156734: dts: meson-g12a: update hmditx i2c pinctrl
Remove repetitive i2c definition.
Change-Id: Ide1b6467385b0f31da30aeffe8244d3918d8a0f8
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
kele bai [Sun, 4 Feb 2018 08:27:20 +0000 (16:27 +0800)]
di: di post wr&vpp link disaply ok
PD#156734: di:
1) fix 0x1a0a error config in video.c
2) update gate control for if0
Change-Id: I6f1a7080b1f6f2d343ed3773ef55b2834d55d0d6
Signed-off-by: kele bai <kele.bai@amlogic.com>
Sunny Luo [Sun, 4 Feb 2018 07:57:09 +0000 (15:57 +0800)]
dts: g12a-skt: add touch device node
PD#156734: dts: g12a-skt:
1. add and enable focaltech ftxx
2. add and enable goodix gtxx
Change-Id: Iff3a2d0a28c5ba78c93f23623b3c34b651bb2cae
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Brian Zhu [Sat, 3 Feb 2018 21:24:26 +0000 (05:24 +0800)]
osd: make osd2 and osd3 work
PD#156734: osd:
1. fix the osd2 & osd3 init error
2. enable all mem_pd
Change-Id: Ib0d817e98ad5381fdd9dc436ff30bf4ed8bbbcca
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Jiyu Yang [Sat, 3 Feb 2018 19:33:44 +0000 (03:33 +0800)]
video: enable ionvideo
PD#156734 enable ionvideo for online video play
Change-Id: I316d9abb2708538813cf2c09d47bb854676ed7e7
Signed-off-by: Jiyu Yang <jiyu.yang@amlogic.com>
Brian Zhu [Sat, 3 Feb 2018 15:29:41 +0000 (23:29 +0800)]
video: disable blend ctrl when video off
PD#156734: video: disable blend ctrl when video off
Change-Id: I31bc906212dde34dd684ba3953ae8ada59107734
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Liang Yang [Sat, 3 Feb 2018 14:40:51 +0000 (22:40 +0800)]
nand: add clock for mtd nand driver
PD#156734: nand: add clock and disable nand module in dts to
avoid conflit with sd_emmc_c.
Change-Id: I204bbc58960cbed47b1c55194e371cd1c61be12a
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
hong.guo [Fri, 2 Mar 2018 07:46:13 +0000 (15:46 +0800)]
CPUFREQ: add cpufreq driver.
PD#156734: cpufreq: add cpufreq driver[2/2].
Change-Id: If38dba0973aa7c0d4e9bbba1bee1af81e84ba6b8
Signed-off-by: hong.guo <hong.guo@amlogic.com>
Bo Yang [Sat, 3 Feb 2018 09:59:26 +0000 (17:59 +0800)]
dtsi: meson-g12a: add all pwm pinmux definitions
PD#156734: dtsi: meson-g12a: add all pwm pinmux definitions
Replace pinctrl used by wifi and cpufreq.
Aand remove repetitive definitions.
Change-Id: Ia2eb89fac9fe6e960333ff3d3e691f7e7f1cfaa1
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Nanxin.Qin [Sat, 3 Feb 2018 04:33:39 +0000 (12:33 +0800)]
media: add the HEVC_DBLK_CFGE to hevc regs.
PD#156734: media: add the HEVC_DBLK_CFGE to hevc regs.
Change-Id: I9e885017176502d0227a353cb049ddf0742e38fe
Signed-off-by: Nanxin.Qin <nanxin.qin@amlogic.com>
Yixun Lan [Thu, 1 Feb 2018 11:58:02 +0000 (19:58 +0800)]
eth: meson-g12a: add Ethernet driver support
PD#156734: eth: meson-g12a: add Ethernet driver support
Enable the ethernet driver on G12A board, which tested
with RTL8211F 1000M PHY && Internal PHY.
And here we enable Internal PHY for g12a_skt board.
Change-Id: I839639ac92790c27117b9745275b346cd4ce40d7
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
hongmin hua [Fri, 12 Jan 2018 07:42:38 +0000 (15:42 +0800)]
cec: cec g12a bring up
PD#156734: cec: change interrupt/pinmux for g12a
Change-Id: I5f9f652addf81db4b792796d41f367073a8ac5b9
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Zan Peng [Sat, 3 Feb 2018 09:11:42 +0000 (17:11 +0800)]
pcie: fix config spaces error
PD#156734: pcie: fix config spaces error
Change-Id: I217b0941a4facd874f4df74e4d0eefa5a72af527
Signed-off-by: Zan Peng <zan.peng@amlogic.com>
Bo Yang [Sat, 3 Feb 2018 08:48:15 +0000 (16:48 +0800)]
dts: g12a-skt: removed repetitive definition of i2c pinmux
PD#156734: dts: g12a-skt: removed repetitive definition of i2c pinmux
Replace i2c3 pinctrl with standard definition.
Change-Id: I28f64dfde90ccb71f5b3fb12437b92f392de28ce
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Bo Yang [Sat, 3 Feb 2018 08:36:03 +0000 (16:36 +0800)]
dts: g12a-skt: add i2c-0 enable
PD#156734: dts: g12a-skt: add i2c-0
Default freq 100k.
Change-Id: Id39713b7d06b885667e5daef0a012bfae1b9882e
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Brian Zhu [Sat, 3 Feb 2018 08:21:23 +0000 (16:21 +0800)]
rdma: enable rdma mem_PD g12a
PD#156734: rdma: enable rdma mem_PD g12a
Change-Id: I3e2f74b524f07372a54a172d7d05b5a55c8f01df
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Zan Peng [Sat, 3 Feb 2018 08:16:01 +0000 (16:16 +0800)]
pcie: fix pcie reset gpio failed
PD#156734: pcie: fix pcie reset gpio failed
1. config 1M spaces for I/O
Change-Id: I0ec9a6e920c5fd2fbf922e3f1338a19dbc373aa6
Signed-off-by: Zan Peng <zan.peng@amlogic.com>
kele bai [Fri, 2 Mar 2018 07:17:05 +0000 (15:17 +0800)]
di: G12A add di nrds&pps&diwr support
PD#156734: G12A add di nrds&pps&diwr support
1) move hdr&vd1&viu releated reg into di_regs.h
2) delete unuseful reg definition
3) add pps in post function
4) add new framereset
Change-Id: I49c58072cc90aa556ab368dcc616c3be4a692db4
Signed-off-by: kele bai <kele.bai@amlogic.com>
Bo Yang [Fri, 2 Mar 2018 07:39:29 +0000 (15:39 +0800)]
dtsi: meson-i2c: add g12a i2c pinmux definitions
PD#156734: dtsi: meson-i2c: add g12a i2c pinmux definitions
Change-Id: I24ef24db8214ce1c927d3a32571fe1ed96fa3ac1
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Brian Zhu [Fri, 2 Feb 2018 14:42:20 +0000 (22:42 +0800)]
osd: enable lacth and use extern canvas mode
PD#156734: osd: enable lacth and use extern canvas modeWq
Change-Id: Ia7506e04068f4980eee86b28acc65b8763b8f29a
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Xing Wang [Fri, 2 Feb 2018 14:33:27 +0000 (22:33 +0800)]
audio: auge: fix tdm skew, pdm clk, spdif to hdmxtx clk inv
PD#156734: audio: auge: fix tdm skew, pdm clk, spdif to hdmxtx clk inv
Change-Id: I2033bb0d0843eca309ad58483183293f1c4d92fa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Yue Wang [Sat, 3 Feb 2018 06:34:18 +0000 (14:34 +0800)]
usb: add usb otg driver support for g12a
PD#156734: usb: add usb otg driver support for g12a
Change-Id: I1af8d290568bca947a6612f31cef3b640c7cd927
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Qiufang Dai [Thu, 1 Feb 2018 15:38:17 +0000 (23:38 +0800)]
clock: g12a: add emmc portA and aoclkc
PD#156734: add emmc portA and aoclkc
Change-Id: Ib54a6eb113bdce21eacc7a2d460df23ee9129e92
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yonghui Yu [Fri, 2 Feb 2018 14:22:34 +0000 (22:22 +0800)]
emmc: g12a: enable emmc at high speed mode
PD#156734: emmc: g12a: enable emmc at high speed mode
Change-Id: I8e314182afa3e7088818d4fd9a83f369bb29ba84
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Yue Wang [Fri, 2 Feb 2018 11:41:59 +0000 (19:41 +0800)]
usb: add usb3.0 driver support for g12a
PD#156734: usb: add usb3.0 driver support for g12a
Change-Id: Iac057b29d041a5c80114407df0ccd965aae11ca1
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Dezhi Kong [Mon, 1 Jan 2018 12:05:06 +0000 (20:05 +0800)]
vpp: config vdin/sr for g12a
PD#156734: vpp: config vdin/sr for g12a
1.config vd1 vpp patch default
2.add viuin debug path
3.merged sr from 3.14
4.add vdin support
5.enable sr for g12a
Change-Id: Ica1a7e7e31330e223528329accb149db74e00cf5
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Liang Yang [Fri, 2 Feb 2018 09:23:06 +0000 (17:23 +0800)]
nand: mtd nand modification
PD#156734: nand: modification
1)sync partition talbe with bootloadr setting.
2)keep compatibale with other platform(a113, etc) when setting lower clock.
3)add a new tested nand flash type
Change-Id: Iff277e6d22bb76c543db76747b22b38f3d60eb11
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
hong.guo [Fri, 2 Feb 2018 07:26:37 +0000 (15:26 +0800)]
CPUFREQ: add cpufreq dts and config.
PD#156734: cpufreq: add cpufreq dts and config[1/2].
Change-Id: I39fff8a6049d8cc0b6f9b4dbfa11d2b1be504339
Signed-off-by: hong.guo <hong.guo@amlogic.com>
Nanxin.Qin [Fri, 2 Feb 2018 08:20:06 +0000 (16:20 +0800)]
media: add the cpu type of G12A and AVS2 vformat
PD#156749:
Change-Id: I7fb09105a939d9a0c6cd3a66202ad29ab9c3c272
Signed-off-by: Nanxin.Qin <nanxin.qin@amlogic.com>
Xing Wang [Fri, 2 Feb 2018 07:03:56 +0000 (15:03 +0800)]
audio: codec: add
ad82584f driver
PD#156734: audio: codec: add
ad82584f driver
Change-Id: I1e2d8b452e5560c84c60d965e7a916fa0ff03bf4
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Zan Peng [Fri, 2 Feb 2018 08:02:07 +0000 (16:02 +0800)]
pcie: add pcie dts support for G12A
PD#156734: pcie: add pcie dts support for G12A
Change-Id: Ia437be3df71062fe89f8203778d5b1b42df37dba
Signed-off-by: Zan Peng <zan.peng@amlogic.com>
Nian Jing [Wed, 3 Jan 2018 13:06:19 +0000 (21:06 +0800)]
cvbs: cvbs bring up for g12a
PD#156734: cvbs bring up for g12a
Change-Id: I8a69d85a921e78300db9ec96c2f93807f6f139b4
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Zan Peng [Fri, 2 Feb 2018 04:42:02 +0000 (12:42 +0800)]
pcie: add pcie driver support for G12A
PD#156734: pcie: add pcie driver support for G12A
Change-Id: I497e17ac212448934416c8af73206cd88766e406
Signed-off-by: Zan Peng <zan.peng@amlogic.com>
Xing Wang [Thu, 1 Feb 2018 01:21:26 +0000 (09:21 +0800)]
audio: auge: avout and notify spdifb to hdmitx
PD#156734: audio: auge: avout and notify spdifb to hdmitx
Change-Id: I63b9fe4d18979b33907a3ed848f99abf42ae8972
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Jiyu Yang [Thu, 22 Feb 2018 09:33:40 +0000 (17:33 +0800)]
osd: disable out fence and wait infence
PD#156734: osd: disable out fence and wait infence
Change-Id: Id0390f5c6667a64915d202362af87db761ef2783
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Brian Zhu [Thu, 1 Feb 2018 16:28:21 +0000 (00:28 +0800)]
video: disable vd1 post and pre as default
PD#156734
Change-Id: I43b372d55e4997999fe7c99ea9d0ab4f7b8a5e57
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yi Zhou [Thu, 22 Feb 2018 09:08:40 +0000 (17:08 +0800)]
hdmitx: update hdmitx mode parameters
PD#156734: hdmitx: update hdmitx mode parameters
1.update 6G signal
2.add hpd interrupt
3.add ddc channel
4.enable every mode output
Change-Id: I7d505f41b4f182324e6d8c560a17fb0b2bbb6b7a
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yu Tu [Fri, 2 Feb 2018 04:23:57 +0000 (12:23 +0800)]
remote in: add remote dtsi config for G12A
PD#156734: remote in: add remote dtsi config for G12A
Change-Id: Ia38c95bf8b16be9bafad396fc681405c98d6bc35
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Weiguang.ruan [Thu, 1 Feb 2018 15:16:55 +0000 (23:16 +0800)]
wifi/bt: add wifi bt config [1/1]
PD#156734: wifi/bt: add wifi bt config
1. add wifi/bt configure
2. set pwm e for 32k clock
3. enable cts/rts of uart_a
Change-Id: I94800030a95119ed8ff0c60171faa2cca8eca287
Signed-off-by: Weiguang.ruan <Weiguang.ruan@amlogic.com>
Yonghui Yu [Thu, 1 Feb 2018 17:36:02 +0000 (01:36 +0800)]
sdcard: g12a: enbable hotplug
PD#156734: sdcard: g12a: enable hotplug on skt.
Change-Id: I04d42895bb526134ea6d9c2a5222e1acbae533a0
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Xingyu Chen [Thu, 18 Jan 2018 08:25:35 +0000 (16:25 +0800)]
iio: saradc: add support for g12a
PD#156734: iio: saradc: add support for g12a
Add period sampling mode for g12a and next, here are a brief overview:
1. Enable period sampling mode
echo 1 > /sys/bus/iio/devices/iio:device0/buffer/enable
2. Set the sampling interval
The sampling interval can be set in dts by the two params:
<1> amlogic,delay-per-tick
<2> amlogic,ticks-per-period
If there are no define the params above, and the channel list is
sampled every 1ms by default.
3. Read sampling data from buffer
this currently provides no buffer events so it is up to userspace to
work out how often to read from the buffer. therefore, if you want to
read continuous sampling data from buffer, please use application.
Eg:
[kernel]/tools/iio/iio_generic_buffer.c
Change-Id: I27f904e2736768eacc9d73ff24078bd659e37049
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Yue Wang [Thu, 1 Feb 2018 15:21:39 +0000 (23:21 +0800)]
usb: add usb host & device driver support for g12a
PD#156734: usb: add usb host & device driver support for g12a
Change-Id: Ia12b63f85fb6d980a7c7906664ae2db7c4ddb86b
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Liang Yang [Thu, 1 Feb 2018 15:53:39 +0000 (23:53 +0800)]
nand: mtd nand initial version
PD#156734: nand: add nand support for G12A
Change-Id: Ic696edd8ca00ec3010e17b25a842788cb95fd166
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
qi duan [Thu, 1 Feb 2018 11:55:48 +0000 (19:55 +0800)]
UART: G12A: verify all uart port on skt dts.[1/1]
PD#156734: UART: G12A: verify all uart port on skt dts.
Change-Id: I2fb272d7803d0c21e16a10c3ccb535b4244e6e6b
Signed-off-by: qi duan <qi.duan@amlogic.com>
Qiufang Dai [Wed, 31 Jan 2018 09:53:16 +0000 (17:53 +0800)]
clock: G12A: fine-tune pcie/common pll parameters
PD#156734: clock: G12A: fine-tune pcie/common pll parameters
Change-Id: Ifbd8d07928deeebaa35c4f950efc290b1648394e
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yi Zhou [Thu, 1 Feb 2018 09:28:11 +0000 (17:28 +0800)]
hdmitx: update 1080p60hz parameters
PD#156734: hdmitx: update 1080p60hz parameters
Change-Id: Ic715b177c9320f97066187725a576780d656305d
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Brian Zhu [Thu, 1 Feb 2018 10:06:12 +0000 (18:06 +0800)]
video: enable vd1 scaler mem_pd for g12a
PD#156734
Change-Id: I8cfcf9fea8513eb5bd13cf292a7c378063247159
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
kele bai [Tue, 30 Jan 2018 08:04:44 +0000 (16:04 +0800)]
di: G12A skt dts add di support
PD#156734: di: G12A skt dts add di support
Change-Id: I95baa216f26af8e2e4da195ef8682cee04ef8660
Signed-off-by: kele bai <kele.bai@amlogic.com>
Xing Wang [Fri, 5 Jan 2018 10:02:51 +0000 (18:02 +0800)]
audio: auge: add sound driver for g12a
PD#156734: audio: auge: add sound driver for g12a
Change-Id: Ic2e9bf734ea33fbbf2911d0d9168934974f37b07
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
kele bai [Thu, 4 Jan 2018 11:20:30 +0000 (19:20 +0800)]
di: G12A add di support
PD#156734: G12A add di support
1) add new mtn&cont&mcinfo&mv&if0 mif
2) add nr downscale
3) post viu link case
4) add pps
Change-Id: Id9ce920323d4324f0e1429df787f8af2dad07318
Signed-off-by: kele bai <kele.bai@amlogic.com>
Evoke Zhang [Mon, 26 Feb 2018 07:05:15 +0000 (15:05 +0800)]
vpu: optimize get_vpu_clk with clktree api
PD#156734: vpu: optimize get_vpu_clk with clktree api
use clk_hw_get_rate instead of clk_get_rate.
Change-Id: Ib2d72c04d4df9acbacf06d189bbbce378f582716
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Brian Zhu [Wed, 31 Jan 2018 10:58:09 +0000 (18:58 +0800)]
osd: compatible with previous chip
PD#156734:
Change-Id: I4f0ea8121af271fb9e8fd60876fe6c59fe9faaaf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Qiufang Dai [Mon, 29 Jan 2018 11:52:46 +0000 (19:52 +0800)]
dts: add g12a skt dts
PD#156734: dts: add g12a skt dts
Change-Id: I40ce169cabd1c53f7b7b8299bb3e11adbe29a35f
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yonghui Yu [Sun, 28 Jan 2018 13:52:19 +0000 (21:52 +0800)]
sdcard: enable sdcard for G12A
PD#156734: clock tree, pinmux tested.
Change-Id: I11088ea6d27c1788516c1b55c4ec81ade99ca112
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Brian Zhu [Sat, 24 Feb 2018 05:02:45 +0000 (13:02 +0800)]
vpp: init viu1 path for g12a
PD#156734: G12A: vpp: init viu1 path for g12a
Change-Id: Ide96b364aa86638597e606c3b53401c84b7e201d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
pengcheng chen [Thu, 14 Dec 2017 11:21:23 +0000 (19:21 +0800)]
osd: add osd support for g12a
PD#156734: osd: add osd support for g12a
Change-Id: I7192f0377da899846219af8d934a50f57fecbe29
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Qiufang Dai [Fri, 26 Jan 2018 11:05:54 +0000 (19:05 +0800)]
secmon: G12A: enable secmon driver in dts
PD#156734: secmon: enable secmon driver in dts
Change-Id: I32a3d5c3505de1c44c8be6b82a7e10ec1fc0a3de
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Fri, 26 Jan 2018 02:59:07 +0000 (10:59 +0800)]
clock: G12A: new add decode, t_sensor clock & vclk2 clk tree
PD#156734: clock: G12A: new add decode, t_sensor clock & vclk2 clk tree
Change-Id: I1a76bb870ecb5793ae7b560472fd2c2aa3f3651f
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Evoke Zhang [Sat, 24 Feb 2018 02:44:13 +0000 (10:44 +0800)]
vpu: update mem_pd control for g12a
PD#156734: vpu: update mem_pd control for g12a
also add vpu power on init function to avoid uboot coupling
Change-Id: Idcf435d7ec2c0e49f2b115102fba10ae9ee86b9d
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jian Hu [Tue, 9 Jan 2018 12:57:56 +0000 (20:57 +0800)]
arm64: dts: meson-g12a: add i2c DT info [2/2]
PD#156734: arm64: dts: meson-g12a: add i2c DT info
Change-Id: I9ff9a61319bbac54722e15c84fa3a19653c481ce
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jiyu Yang [Mon, 25 Dec 2017 06:26:45 +0000 (14:26 +0800)]
dts: add dvalin config
PD#156734: add dvalin gpu config
Change-Id: Ib30694b302ae9e2839cb2f64e076934c041f9ff0
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
zhilei.wu [Sat, 24 Feb 2018 07:44:27 +0000 (15:44 +0800)]
ge2d: add ge2d support for g12a
PD#156734: ge2d: add ge2d support for g12a
support src2 blend
Change-Id: I5b8acd95d54d4c6160290a7d0254f8e96e20ce4b
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Bo Yang [Sun, 21 Jan 2018 09:52:18 +0000 (17:52 +0800)]
watchdog: add meson watchdog driver v3
PD#156734: watchdog: add meson watchdog driver v3
Change-Id: I5aac3393fd56b9961d669ca990dea0b7d42ee016
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Jian Hu [Mon, 8 Jan 2018 13:36:16 +0000 (21:36 +0800)]
arm64: dts: meson-g12a: add pwm DT info [2/2]
PD#156734: arm64: dts: meson-g12a: add pwm DT info
Change-Id: Iff1ed3709c66e97ac0334290d873b8a67544a6f2
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Brian Zhu [Tue, 16 Jan 2018 12:25:59 +0000 (20:25 +0800)]
media: add codec_io and canvas module for g12a
PD#156734: G12A: media: add codec_id and canvas module
Change-Id: Ib0e4ef05c237c313f483ebe2b029bf50f57d1c0a
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Jian Hu [Mon, 8 Jan 2018 13:02:08 +0000 (21:02 +0800)]
pwm: meson-g12a: add pwm support [1/2]
PD#156734: pwm: meson-g12a: add pwm support
Change-Id: I30b996a96e9c731379c10b4a09c4ff751d84140b
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jian Hu [Tue, 9 Jan 2018 12:33:41 +0000 (20:33 +0800)]
i2c: meson-g12a: add i2c support [1/2]
PD#156734: i2c: meson-g12a: add i2c support
Change-Id: I10ac105b99f7a426e23fef501741a62d3b887985
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Qiufang Dai [Thu, 11 Jan 2018 08:41:15 +0000 (16:41 +0800)]
G12A: psci: enable psci in dts
PD#156734: G12A: psci: enable psci in dts
Change-Id: I448e6a85e2ecf0ed8870c9b883b598c51f5d7b74
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Mon, 8 Jan 2018 13:10:53 +0000 (21:10 +0800)]
clock: G12A: add sys_pll/hifi_pll/gp0_pll table
PD#156734: pll freq table which 3G < DCO < 6G
Change-Id: Ia1cadbd13af57d45a3a6d7b1bf65b8a055f4f91f
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yi Zhou [Sat, 24 Feb 2018 02:11:54 +0000 (10:11 +0800)]
hdmitx: hdmitx bringup for g12a
PD#156734: hdmitx: hdmitx bringup for g12a
Change-Id: Ie99915e69c90e3335183692611d8b92f7d3620ef
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Tue, 2 Jan 2018 03:27:09 +0000 (11:27 +0800)]
vout_serve: add vout, vout2 support for g12a
PD#156734: vout_serve: add vout, vout2 support for g12a
Change-Id: I1cb45beca5325f9013901687d7d995bfb9a25766
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Fri, 29 Dec 2017 14:11:10 +0000 (22:11 +0800)]
vpu: add vpu support for g12a
PD#156734: vpu: add vpu support for g12a
Change-Id: I65f559e34408a6c2ecf2ff8b34a3fe1f9d1e440a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xingyu Chen [Sat, 24 Feb 2018 06:22:42 +0000 (14:22 +0800)]
pinctrl: add pinctrl&gpio support for g12a
PD#156734: pinctrl: add pinctrl&gpio support for g12a
the new pin feature (drive-strength) is first introduced in Meson
Series SoC [G12A]. we can refer the following example to use:
mux {
groups = "uart_ao_tx_a", "uart_ao_rx_a";
function = "uart_ao_a";
drive-strength = <1>;
}
the value of drive-strength can be set to 0/1/2/3, the larger
the value, the faster the slew rate.
Change-Id: I22c6967aa1d5de1b3f6acb84cb18a79b05c0403b
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Xingyu Chen [Tue, 2 Jan 2018 04:01:40 +0000 (12:01 +0800)]
irqchip: add gpio IRQ support for g12a
PD#156734: irqchip: add gpio IRQ support for g12a
Change-Id: I6eac421ca9ac9d908f3c52f0417da32fdde74c57
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Qiufang Dai [Tue, 2 Jan 2018 11:56:29 +0000 (19:56 +0800)]
clock: G12A media/gpu/fclk_div2p5 clk
PD#156734: G12A media/gpu/fclk_div2p5 clk
Change-Id: I804fdfff57f841a9628bc4a35cbc2ba63fe076c6
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Sat, 23 Dec 2017 09:32:27 +0000 (17:32 +0800)]
clock: clock tree for G12A
PD#156734: base clock tree for G12A,
include clk81, ee gate, sdemmc clock, fix/hifi/syspll/pcie plls, mpll, clkmsr
Change-Id: I9fe7c1d64d9db5d384070f5dcefdc69f5f60dbd2
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Mon, 18 Dec 2017 13:56:00 +0000 (21:56 +0800)]
cpuinfo: cputype api for G12A
PD#156734: cpuinfo: cputype api for G12A
Change-Id: Ib21038d4c622d0ca48c714f3773e63c89c408929
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Wed, 13 Dec 2017 03:56:38 +0000 (11:56 +0800)]
G12A: initial clk headfile for pxp
PD#156734: G12A: initial clk headfile for pxp
Change-Id: I82b549cea704d9d1b94b36dfb27eaf5547bcf172
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Tue, 12 Dec 2017 11:55:02 +0000 (19:55 +0800)]
G12A: initial dts porting for pxp
PD#156734: G12A: initial dts porting for pxp
Change-Id: I84d9bd5eb97c0ae0e04f17cd1e41b68fead0ed05
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yixun Lan [Fri, 23 Feb 2018 07:19:28 +0000 (15:19 +0800)]
ARM64: DTS: drop the q200 dts
PD#NONE: ARM64: DTS: drop the q200 dts
This will revert the Merge commit
fa121b2d3444 which introduced
by accident. After this is done, the result version is equal to
commit
cc1dabc1824c
Change-Id: I0a4e5b9a41c09f9fc6eaaf55c4453219c17c59ab
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Yalong Liu [Fri, 23 Feb 2018 06:12:34 +0000 (14:12 +0800)]
PD#NONE: test git right
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>