scsi: mpt3sas_scsih: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-17-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas_scsih: Drop PCI Wakeup calls from .resume

The driver calls pci_enable_wake(...., false) in scsih_resume(), and there
is no corresponding pci_enable_wake(...., true) in scsih_suspend().  Either
it should do enable-wake the device in .suspend() or should not invoke
pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
scsih_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-16-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas_v3_hw: Remove extra function calls for runtime pm

Both runtime_suspend_v3_hw() and runtime_resume_v3_hw() do nothing else but
invoke suspend_v3_hw() and resume_v3_hw() respectively. This is the case of
unnecessary function calls. To use those functions for runtime pm as well,
simply use UNIVERSAL_DEV_PM_OPS.

make -j$(nproc) W=1, with CONFIG_PM disabled, throws '-Wunused-function'
warning for runtime_suspend_v3_hw() and runtime_resume_v3_hw(). After
dropping those function definitions, the warning was thrown for
suspend_v3_hw() and resume_v3_hw(). Hence, mark them as '__maybe_unused'.

Link: https://lore.kernel.org/r/20201102164730.324035-15-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas_v3_hw: Don't use PCI helper functions

Drivers using new-framework/generic-framework should not handle standard
power management operations. These operations were performed by legacy
framework through PCI helper functions like pci_save/restore_state(),
pci_set_power_state(), etc.

Drivers should not use them now.

Link: https://lore.kernel.org/r/20201102164730.324035-14-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas_v3_hw: Drop PCI Wakeup calls from .resume

The driver calls pci_enable_wake(...., false) in hisi_sas_v3_resume(), and
there is no corresponding pci_enable_wake(...., true) in
hisi_sas_v3_suspend(). Either it should do enable-wake the device in
.suspend() or should not invoke pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
hisi_sas_v3_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-13-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-12-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Drop PCI Wakeup calls from .resume

The driver calls pci_enable_wake(...., false) in esas2r_resume(), and there
is no corresponding pci_enable_wake(...., true) in esas2r_suspend().
Either it should do enable-wake the device in .suspend() or should not
invoke pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
esas2r_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-11-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-10-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Drop PCI wakeup calls from .resume

The driver calls pci_enable_wake(...., false) in arcmsr_resume(), and there
is no corresponding pci_enable_wake(...., true) in arcmsr_suspend().
Either it should do enable-wake the device in .suspend() or should not
invoke pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
arcmsr_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-9-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic79xx: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-8-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic7xxx: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-7-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-6-vaibhavgupta40@gmail.com
Acked-by: Balsundar P <balsundar.p@microchip.com>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Drop pci_enable_wake() from .resume

The driver calls pci_enable_wake(...., false) in aac_resume(), and there is
no corresponding pci_enable_wake(...., true) in aac_suspend(). Either it
should do enable-wake the device in .suspend() or should not invoke
pci_enable_wake() at all.

Concluding that this is a bug and PCI core calls pci_enable_wake(pci_dev,
PCI_D0, false) during resume, drop it from aac_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-5-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Update function description

Function parameter 'pdev 'is described as Generic Device Structure. It is a
PCI device structure.

Link: https://lore.kernel.org/r/20201102164730.324035-4-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Use generic power management

Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Link: https://lore.kernel.org/r/20201102164730.324035-3-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Drop PCI wakeup calls from .resume

The driver calls pci_enable_wake(...., false) in megasas_resume(), and
there is no corresponding pci_enable_wake(...., true) in megasas_suspend().
Either it should do enable-wake the device in .suspend() or should not
invoke pci_enable_wake() at all.

Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
megasas_resume().

Link: https://lore.kernel.org/r/20201102164730.324035-2-vaibhavgupta40@gmail.com
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Validate io_req before others

We need to check for a valid io_req before we check other data. Also,
remove redundant checks.

Link: https://lore.kernel.org/r/20201121023337.19295-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Set scsi_set_resid() only for underflow

Set scsi_set_resid() only if FCPIO_ICMND_CMPL_RESID_UNDER is set.

Link: https://lore.kernel.org/r/20201121015134.18872-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Change shost_printk() to FNIC_MAIN_DBG()

Replace shost_printk() with FNIC_MAIN_DBG() so that these log messages are
controlled by fnic_log_level flag in fnic_handle_link.

Link: https://lore.kernel.org/r/20201121013739.18701-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Avoid looping in TRANS ETH on unload

Avoid looping in fnic_scsi_abort_io() before sending fw reset when fnic is
in TRANS ETH state and when we have not received any link events.

Link: https://lore.kernel.org/r/20201121012145.18522-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Change shost_printk() to FNIC_FCS_DBG()

Replacing shost_printk with FNIC_FCS_DBG() so that these log messages are
controlled by fnic_log_level flag in fnic_fip_handler_timer.

Bumping up version number from 47 to 49 to maintain same level as internal
version.

Link: https://lore.kernel.org/r/20201120220712.16708-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Make implicit use of pm8001_ha in pm8001_printk() explicit

Make the pm8001_printk() macro take an explicit HBA instead of assuming the
existence of an unspecified pm8001_ha argument.

Miscellanea:

 - Add pm8001_ha to the few uses of pm8001_printk()

 - Add HBA to the pm8001_dbg macro call to pm8001_printk()

Link: https://lore.kernel.org/r/0e17a4c845f15e18f98b346ffb9b039584d21cdd.1605914030.git.joe@perches.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Neaten debug logging macros and uses

Every PM8001_<FOO>_DBG macro uses an internal call to pm8001_printk.

Convert all uses of:

PM8001_<FOO>_DBG(hba, pm8001_printk(fmt, ...))
to
pm8001_dbg(hba, <FOO>, fmt, ...)

so the visual complexity of each macro is reduced.

The repetitive macro definitions are converted to a single pm8001_dbg and
the level is concatenated using PM8001_##level##_LOGGING for the specific
level test.

Done with coccinelle, checkpatch and a little typing of the new macro
definition.

Miscellanea:

 - Coalesce formats

 - Realign arguments

 - Add missing terminating newlines to formats

 - Remove trailing spaces from formats

 - Change defective loop with printk(KERN_INFO... to emit a 16 byte hex
   block to %p16h

Link: https://lore.kernel.org/r/49f36a93af7752b613d03c89a87078243567fd9a.1605914030.git.joe@perches.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove typecast for pointer returned by kcalloc()

Stop typecasting the value returned by kcalloc().

Link: https://lore.kernel.org/r/20201120083648.9319-1-vulab@iscas.ac.cn
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: NCR5380: Reduce NCR5380_maybe_release_dma_irq() call sites

Refactor to avoid needless calls to NCR5380_maybe_release_dma_irq().
This makes the machine code smaller and the source more readable.

Link: https://lore.kernel.org/r/c1317ae8fdcb498460de5d7ea0bd62a42f5eeca8.1605847196.git.fthain@telegraphics.com.au
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: atari_scsi: Fix race condition between .queuecommand and EH

It is possible that bus_reset_cleanup() or .eh_abort_handler could be
invoked during NCR5380_queuecommand(). If that takes place before the new
command is enqueued and after the ST-DMA "lock" has been acquired, the
ST-DMA "lock" will be released again. This will result in a lost DMA
interrupt and a command timeout. Fix this by excluding EH and interrupt
handlers while the new command is enqueued.

Link: https://lore.kernel.org/r/af25163257796b50bb99d4ede4025cea55787b8f.1605847196.git.fthain@telegraphics.com.au
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Adjust logic in common ADAPT helper

The introduction of ufshcd_dme_configure_adapt() refactored out duplication
from the Mediatek and Qualcomm drivers.

Both these implementations had the logic of:

    gear_tx == UFS_HS_G4 => PA_INITIAL_ADAPT
    gear_tx != UFS_HS_G4 => PA_NO_ADAPT

but now both implementations pass PA_INITIAL_ADAPT as "adapt_val" and if
gear_tx is not UFS_HS_G4 that is replaced with PA_INITIAL_ADAPT. In other
words, it's PA_INITIAL_ADAPT in both above cases.

The result is that e.g. Qualcomm SM8150 has no longer functional UFS, so
adjust the logic to match the previous implementation.

Link: https://lore.kernel.org/r/20201121044810.507288-1-bjorn.andersson@linaro.org
Fixes: fc85a74e28fe ("scsi: ufs: Refactor ADAPT configuration function")
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix variable 'vport' set but not used in lpfc_sli4_abts_err_handler()

Remove vport variable that is assigned but not used in
lpfc_sli4_abts_err_handler().

Link: https://lore.kernel.org/r/20201119203407.121913-1-james.smart@broadcom.com
Fixes: e7dab164a9aa ("scsi: lpfc: Fix scheduling call while in softirq context in lpfc_unreg_rpi")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix missing prototype for lpfc_nvmet_prep_abort_wqe()

lpfc_nvmet_prep_abort_wqe() needs to be declared static.

Link: https://lore.kernel.org/r/20201119203316.121725-1-james.smart@broadcom.com
Fixes: db7531d2b377 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix set but unused variables in lpfc_dev_loss_tmo_handler()

Remove set but not used variable shost in lpfc_dev_loss_tmo_handler().

Link: https://lore.kernel.org/r/20201119203353.121866-1-james.smart@broadcom.com
Fixes: 52edb2caf675 ("scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix set but not used warnings from Rework remote port lock handling

Remove local variables that are set but not used.

Link: https://lore.kernel.org/r/20201119203340.121819-1-james.smart@broadcom.com
Fixes: c6adba150191 ("scsi: lpfc: Rework remote port lock handling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix missing prototype warning for lpfc_fdmi_vendor_attr_mi()

Function needs to be declared as static.

Link: https://lore.kernel.org/r/20201119203328.121772-1-james.smart@broadcom.com
Fixes: 8aaa7bcf07a2 ("scsi: lpfc: Add FDMI Vendor MIB support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix memory leak on lcb_context

Currently there is an error return path that neglects to free the
allocation for lcb_context.  Fix this by adding a new error free exit path
that kfree's lcb_context before returning.  Use this new kfree exit path in
another exit error path that also kfree's the same object, allowing a line
of code to be removed.

Link: https://lore.kernel.org/r/20201118141314.462471-1-colin.king@canonical.com
Fixes: 4430f7fd09ec ("scsi: lpfc: Rework locations of ndlp reference taking")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Resource leak")

scsi: lpfc: Remove dead code on second !ndlp check

Currently there is a null check on the pointer ndlp that exits via error
path issue_ct_rsp_exit followed by another null check on the same pointer
that is almost identical to the previous null check stanza and yet can
never can be reached because the previous check exited via
issue_ct_rsp_exit. This is deadcode and can be removed.

Link: https://lore.kernel.org/r/20201118133744.461385-1-colin.king@canonical.com
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Logically dead code")

scsi: lpfc: Fix pointer defereference before it is null checked issue

There is a null check on pointer lpfc_cmd after the pointer has been
dereferenced when pointers rdata and ndlp are initialized at the start of
the function. Fix this by only assigning rdata and ndlp after the pointer
lpfc_cmd has been null checked.

Link: https://lore.kernel.org/r/20201118131345.460631-1-colin.king@canonical.com
Fixes: 96e209be6ecb ("scsi: lpfc: Convert SCSI I/O completions to SLI-3 and SLI-4 handlers")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Dereference before null check")

scsi: ibmvfc: Advertise client support for targetWWPN using v2 commands

The previous patch added support for the targetWWPN field in version 2 MADs
and vfcFrame structures.

Set the IBMVFC_CAN_SEND_VF_WWPN bit in our capabailites flag during NPIV
Login to inform the VIOS that this client supports the feature.

Link: https://lore.kernel.org/r/20201118011104.296999-7-tyreld@linux.ibm.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Add support for target_wwpn field in v2 MADs and vfcFrame

Several version 2 MADs and the version 2 vfcFrame structures introduced a
new targetWWPN field for better identification of a target over the
scsi_id.

Set this field and MAD versioning fields when the VIOS advertises the
IBMVFC_HANDLE_VF_WWPN capability.

Link: https://lore.kernel.org/r/20201118011104.296999-6-tyreld@linux.ibm.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Add FC payload retrieval routines for versioned vfcFrames

The FC iu and response payloads are located at different offsets depending
on the ibmvfc_cmd version. This is a result of the version 2 vfcFrame
definition adding an extra 64bytes of reserved space to the structure prior
to the payloads.

Add helper routines to determine the current vfcFrame version and return a
pointer to the proper iu or response structure within that ibmvfc_cmd.

Link: https://lore.kernel.org/r/20201118011104.296999-5-tyreld@linux.ibm.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Add helper for testing capability flags

Testing the NPIV Login response capabilities is a long winded process of
dereferencing the vhost->login_buf->resp.capabilities field, then byte
swapping that value to host endian, and performing the bitwise test.
Currently we only ever check this in ibmvfc_cancel_all(), but follow-up
patches will need to regularly check for targetWWPN and channelization
support.

Add a helper to simplify checking various VIOS capabilities, namely
ibmvfc_check_caps().

Link: https://lore.kernel.org/r/20201118011104.296999-4-tyreld@linux.ibm.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Add new fields for version 2 of several MADs

Introduce a target_wwpn field to several MADs. Its possible that a SCSI ID
of a target can change due to some fabric changes. The WWPN of the SCSI
target provides a better way to identify the target. Also, add flags for
receiving MAD versioning information and advertising client support for
targetWWPN with the VIOS. This latter capability flag will be required for
future clients capable of requesting multiple hardware queues from the host
adapter.

Link: https://lore.kernel.org/r/20201118011104.296999-3-tyreld@linux.ibm.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Deduplicate common ibmvfc_cmd init code

The virtual FC frame command exchanged with the VIOS is used for device
reset and command abort TMF as well as normally queued commands. When
initializing the ibmvfc_cmd there are several elements of the command that
are set the same way regardless of the command type.

Deduplicate code by moving these commonally set fields into a
initialization helper routine, namely ibmvfc_init_vfc_cmd().

Link: https://lore.kernel.org/r/20201118011104.296999-2-tyreld@linux.ibm.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Use correlation token to tag commands

The vfcFrame correlation field is a 64bit handle that is intended to trace
I/O operations through both the client stack and VIOS stack when the
underlying physical FC adapter supports tagging.

Tag vfcFrames with the associated ibmvfc_event pointer handle.

Link: https://lore.kernel.org/r/20201117185031.129939-3-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Remove trailing semicolon

Remove a superfluous semicolon following a closing function block bracket.

Link: https://lore.kernel.org/r/20201117185031.129939-2-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Byte swap login_buf.resp values in attribute show functions

Both ibmvfc_show_host_(capabilities|npiv_version) functions retrieve values
from vhost->login_buf.resp buffer. This is the MAD response buffer from the
VIOS and as such any multi-byte non-string values are in big endian format.

Byte swap these values to host CPU endian format for better human
readability.

Link: https://lore.kernel.org/r/20201117185031.129939-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Show LBA and length for UNMAP commands

We have LBA and length for unmap commands.

Link: https://lore.kernel.org/r/20201117165839.1643377-8-jaegeuk@kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Leo Liou <leoliou@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix clkgating on/off

The following call stack prevents clk_gating at every I/O completion.  We
can remove the condition, ufshcd_any_tag_in_use(), since clkgating_work
will check it again.

ufshcd_complete_requests(struct ufs_hba *hba)
  ufshcd_transfer_req_compl()
    __ufshcd_transfer_req_compl()
      __ufshcd_release(hba)
        if (ufshcd_any_tag_in_use() == 1)
           return;
  ufshcd_tmc_handler(hba);
    blk_mq_tagset_busy_iter();

Note that this still requires work to deal with a potential race condition
when user sets clkgating.delay_ms to very small value. That can cause
preventing clkgating by the check of ufshcd_any_tag_in_use() in gate_work.

Link: https://lore.kernel.org/r/20201117165839.1643377-7-jaegeuk@kernel.org
Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add more contexts in the ufs tracepoints

This adds user-friendly tracepoints with group id.

Link: https://lore.kernel.org/r/20201117165839.1643377-6-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Use WQ_HIGHPRI for gating work

Must have WQ_MEM_RECLAIM

``WQ_MEM_RECLAIM``

  All workqueues which might be used in the memory reclaim paths **MUST**
  have this flag set.  The wq is guaranteed to have at least one execution
  context regardless of memory pressure.

Link: https://lore.kernel.org/r/20201117165839.1643377-5-jaegeuk@kernel.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Clear UAC for FFU and RPMB LUNs

In order to conduct FFU or RPMB operations, UFS needs to clear UNIT
ATTENTION condition. Clear it explicitly so that we get no failures during
initialization.

Link: https://lore.kernel.org/r/20201117165839.1643377-4-jaegeuk@kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Atomic update for clkgating_enable

While running a stress test which enables/disables clkgating, we
occasionally hit device timeout. This patch avoids a subtle race condition
to address it.

Link: https://lore.kernel.org/r/20201117165839.1643377-3-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Avoid to call REQ_CLKS_OFF to CLKS_OFF

Once UFS is gated with CLKS_OFF, it should not call REQ_CLKS_OFF
again. This can lead to hibern8_enter failure.

Link: https://lore.kernel.org/r/20201117165839.1643377-2-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Remove redundant assignment to variable rval

The variable rval has been initialized with 'QLA_ERROR'. The assignment is
redundant in an error path. Remove it.

Link: https://lore.kernel.org/r/20201103120137.109717-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-qcom: Use common ADAPT configuration function

Use common ADAPT configuration function to reduce duplicated code in UFS
drivers.

Link: https://lore.kernel.org/r/20201116065054.7658-10-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-mediatek: Use common ADAPT configuration function

Use common ADAPT configuration function to reduce duplicated code in UFS
drivers.

Link: https://lore.kernel.org/r/20201116065054.7658-9-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Refactor ADAPT configuration function

Several vendors are using same code to configure ADAPT settings for
HS-G4. Simply refactor it as common function.

Link: https://lore.kernel.org/r/20201116065054.7658-8-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-hisi: Use device parameter initialization function

Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.

Link: https://lore.kernel.org/r/20201116065054.7658-7-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Use device parameter initialization function

Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.

Link: https://lore.kernel.org/r/20201116065054.7658-6-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-qcom: Use device parameter initialization function

Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.

Link: https://lore.kernel.org/r/20201116065054.7658-5-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-mediatek: Use device parameter initialization function

Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.

Link: https://lore.kernel.org/r/20201116065054.7658-4-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Introduce device parameter initialization function

Nowadays many vendors initialize their device parameters in their own
vendor drivers. The initialization code is almost the same as well as the
pre-defined definitions. Introduce a common device parameter initialization
function which assign the most common initial values. With this function,
we could remove those duplicated codes in vendor drivers.

Link: https://lore.kernel.org/r/20201116065054.7658-3-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-mediatek: Refactor performance scaling functions

Refactor performance scaling related functions in MediaTek UFS driver.

Link: https://lore.kernel.org/r/20201116065054.7658-2-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update changed file copyrights for 2020

Update Copyright in files changed by the 12.8.0.6 patch set to 2020

Link: https://lore.kernel.org/r/20201115192646.12977-18-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 12.8.0.6

Update lpfc version to 12.8.0.6

Link: https://lore.kernel.org/r/20201115192646.12977-17-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers

This patch reworks the abort interfaces such that SLI-3 retains the
iocb-based formatting and completions and SLI-4 now uses native WQEs and
completion routines.

The following changes are made:

 - The code is refactored from a confusing 2 routine sequence of
   xx_abort_iotag_issue(), which creates/formats and abort cmd, and
   xx_issue_abort_tag(), which then issues and handles the completion of
   the abort cmd - into a single interface of xx_issue_abort_iotag().  The
   new interface will determine whether SLI-3 or SLI-4 and then call the
   appropriate handler. A completion handler can now be specified to
   address the differences in completion handling.  Note: original code is
   all iocb based, with SLI-4 converting to SLI-3 for the SCSI/ELS path,
   and NVMe natively using wqes.

 - The SLI-3 side is refactored:

   The older iocb-base lpfc_sli_issue_abort_iotag() routine is combined
   with the logic of lpfc_sli_abort_iotag_issue() as well as the
   iocb-specific code in lpfc_abort_handler() and lpfc_sli_abort_iocb() to
   create the new single SLI-3 abort routine that formats and issues the
   iocb.

 - The SLI-4 side is refactored and added to:

   The native WQE abort code in NVMe is moved to the new SLI-4
   issue_abort_iotag() routine. Items in SCSI that set fields not set by
   NVMe is migrated into the new routine. Thus the routine supports NVMe
   and SCSI initiators. The nvmet block (target) formats the abort slightly
   different (like the old NVMe initiator) thus it has its own prep routine
   stolen from NVMe initiator and it retains the current code it has for
   issuing the WQE (does not use the commonized routine the initiators
   do). SLI-4 completion handlers were also added.

 - lpfc_abort_handler now becomes a wrapper that determines whether
   SLI-3 or SLI-4 and calls the proper abort handler.

Link: https://lore.kernel.org/r/20201115192646.12977-16-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Convert SCSI I/O completions to SLI-3 and SLI-4 handlers

The current driver implementation uses SLI-4 WQE to iocb conversion before
calling the cmpl callback function.

Rework the FCP I/O completion path to utilize the SLI-4 WQE.

This patch converts the SCSI I/O completion paths from the iocb-centric
interfaces to the routines are native for whether I/Os are iocb-based
(SLI-3) or WQE-based (SLI-4).

Most existing routines were iocb-based, so this creates a lot of SLI-4
specific routines to provide the functionality.

Link: https://lore.kernel.org/r/20201115192646.12977-15-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Convert SCSI path to use common I/O submission path

This patch converts the SCSI I/O path from the iocb-centric interfaces to
the common I/O submission path which supports native SLI-4 WQEs.

A wrapper routine is put in place to distinguish SLI-3 from SLI. If SLI-3,
the same iocb-centric paths are used, perhaps with refactored code that is
explicitly for SLI-3.  For SLI-4, any iocb-related formatting is replaced
by wqe-based formatting, although much of that is addressed by the common
wqe templates in the SLI-4 path.

Link: https://lore.kernel.org/r/20201115192646.12977-14-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Enable common send_io interface for SCSI and NVMe

To set up common use by the SCSI and NVMe I/O paths, create a new routine
that issues FCP I/O commands which can be used by either protocol.  The new
routine addresses SLI-3 vs SLI-4 differences within its implementation.

Replace the (SLI-3 centric) iocb routine in the SCSI path with this new
WQE-centric common routine.

Link: https://lore.kernel.org/r/20201115192646.12977-13-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Enable common wqe_template support for both SCSI and NVMe

The driver is currently using SLI-4 WQE templates only for NVMe.  Refactor
the template and the placement of the service routine so that it can be
used by both SCSI and NVMe.

Link: https://lore.kernel.org/r/20201115192646.12977-12-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Refactor WQE structure definitions for common use

In preparation of reworking the driver to use a native SLI-4 WQE interface
for the SCSI and NVMe I/O paths, start by commonizing the WQE exchange type
and command type attributes.

While adjusting these options also noted the variance in the pbde field.
Fix this by setting templates to 0 and in NVMe, which explicitly uses this
option, setting the value.

Link: https://lore.kernel.org/r/20201115192646.12977-11-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix NPIV Fabric Node reference counting

While testing initiator-side cable swaps with NPIV, oops occur.  The
reference counts for the Fabric nodes on the NPIV vports isn't balanced,
resulting in premature node removal.

The following fixes were made:

 - Removed the FC_LBIT check in lpfc_linkup_port. This removed the special
   case for vports that didn't have them clean up just like the physical
   port.

 - Removed the unreg_rpi call in lpfc_cleanup_node. In this section, the
   node is being removed in the context of a reference count release and a
   mailbox command can't be issued at this point.

 - Remove special case handling in the default mailbox completion handler
   that allowed the skipping of a node reference. Now, reference counting
   always requires the removal of the reference.

 - Move the location of the DEVICE_RM event is done during LOGO handling as
   the driver has additional work to do on the ndlp before puts/releases
   can be performed.

Link: https://lore.kernel.org/r/20201115192646.12977-10-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix NPIV discovery and Fabric Node detection

While testing NPIV and link bounces, the vport would not show a fabric node
for the F_Port, would not transition into NPR state during a link fault, or
leave the FDMI node untouched during error injection. Cause for this was
determined to be an inconsistent manner in which F_Port, Nameserver, and
FDMI controller nodes were created and linked. In some cases, the nodes
would never be unregistered from the transport, leaving references
active. In other cases, the fabric nodes may register with the transport
multiple times while still registered.

The following changes were made:

 - Fix the FDISC issue routine, which starts vport (re)creation, to mark
   the F_Port as a fabric node (NLP_FABRIC) and allow the F_Port node to
   fully be created and show up in the node list.

 - When remote ports are cleaned up on vport termination, cleanup the
   nameserver and FDMI controller nodes on the vport so they unregister
   from the transport.

 - On link bounces, don't exclude the NPIV Fabric remote ports from
   transitioning to the NPR state, allowing them to avoid re-registration
   if already registered.

Link: https://lore.kernel.org/r/20201115192646.12977-9-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Unsolicited ELS leaves node in incorrect state while dropping it

When a target swap happens, under certain conditions the node sends a
LOGO. The unsolicited ELS logic responds with a reject. The logic may
allocate a new node to handle this. Afterward, the new nodes are dropped
incorrectly leaving them in a mis-matched state and refcounting causes a
use-after-free situation leading to a crash.

It is also possible that the unsolicited els handling finds a node which is
in an UNUSED state. The handling moves these nodes to NPR state with a
refcount of 1. Although the end of the discovery logic assumes a final put
will free such a node, there are codes paths which could increment the
reference count, thus the node is in NPR state and not released.
Eventually this mismatch in state and refcount leads to premature release
of the node causing a crash.

Fix by always using the discovery engine DEVICE RM event to decrement and
release the nodes (rather than explicit code that tried to do it before).
This will take care of moving the node to the UNUSED state and then removes
the final ref count. If there is a trigger to reuse this node, the
transition from the UNUSED state clearly indicates that the initial
reference is then incremented and use can continue.

Link: https://lore.kernel.org/r/20201115192646.12977-8-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails

When a PLOGI/ADISC/PRLI/REG_RPI fails, the node remains in the nodelist in
that state.  Although the driver now frees a node when the ref count goes
to zero, in this case the ref cnt doesn't reach zero because there isn't a
mechanism to release the final reference.  Discovery just stops.

Fix by calling the node discovery state machine DEVICE_RM event whenever
one of these commands fail. This will remove the final reference count and
trigger node release.

Link: https://lore.kernel.org/r/20201115192646.12977-7-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rework remote port lock handling

Currently the discovery layers within the driver use the SCSI midlayer
host_lock to access node-specific structures. This can contend with the I/O
path and is too coarse of a lock.

Rework the driver so that it uses a lock specific to the remote port node
structure when accessing the structure contents. A few of the changes
brought out spots were some slightly reorganized routines worked better.

Link: https://lore.kernel.org/r/20201115192646.12977-6-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix refcounting around SCSI and NVMe transport APIs

Due to bug history and code review, the node reference counting approach in
the driver isn't implemented consistently with how the scsi and nvme
transport perform registrations and unregistrations and their callbacks.
This resulted in many bad/stale node pointers.

Reword the driver so that reference handling is performed as follows:

 - The initial node reference is taken on structure allocation

 - Take a reference on any add/register call to the transport

 - Remove a reference on any delete/unregister call to the transport

 - After the node has fully removed from both the SCSI and NVMEe transports
   (dev_loss_callbacks have called back) call the discovery engine
   DEVICE_RM event which will remove the final reference and release the
   node structure.

 - Alter dev_loss handling when a vport or base port is unloading.

 - Remove the put_node handling - no longer needed.

 - Rewrite the vport_delete handling on reference counts.  Part of this
   effort was driven from the FDISC not registering with the transport and
   disrupting the model for node reference counting.

 - Deleted lpfc_nlp_remove.  Pushed it's remaining ops into
   lpfc_nlp_release.

 - Several other small code cleanups.

Link: https://lore.kernel.org/r/20201115192646.12977-5-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix removal of SCSI transport device get and put on dev structure

The lpfc driver is calling get_device and put_device on scsi_fc_transport
device structure. When this code was removed, the driver triggered an oops
in "scsi_is_host_dev" when the first SCSI target was unregistered from the
transport.

The reason the calls were necessary is that the driver is calling
scsi_remove_host too early, before the target rports are unregistered and
the scsi devices disconnected from the scsi_host.  The fc_host was torn
down during fc_remove_host.

Fix by moving the lpfc_pci_remove_one_s3/s4 calls to scsi_remove_host to
after the nodes are cleaned up.  Remove the get_device and put_device calls
and the supporting code.

Link: https://lore.kernel.org/r/20201115192646.12977-4-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rework locations of ndlp reference taking

Now that the driver has gone to a normal ref interface (with no odd logic)
the discovery logic needs to be updated to reworked so that it properly
takes references when it should and give them up when it should.

Rework the driver for the following get/put model:

 - Move gets to just before an I/O is issued. Add gets for places where an
   I/O was issued without one.

 - Ensure that failures from lpfc_nlp_get() are handled by the driver.

 - Check and fix the placement of lpfc_nlp_puts relative to io completions.
   Note: some of these paths may not release the reference on the exact io
   completion as the reference is held as the code takes another step in
   the discovery thread and which may cause another io to be issued.

 - Rearrange some code for error processing and calling lpfc_nlp_put.

 - Fix some places of incorrect reference freeing that was causing the
   premature releasing of the structure.

 - Nvmet plogi handling performs unreg_rpi's. The reference counts were
   unbalanced resulting in premature node removal. In some cases this
   caused loss of node discovery. Corrected the reftaking around nvmet
   plogis.

Nodes that experience devloss now get released from the node list now that
there is a proper reference taking.

Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rework remote port ref counting and node freeing

When a remote port is disconnected and disappears, its node structure
(ndlp) stays allocated and on a vport node list. While on the list it can
be matched, thus requires validation checks on state to be added in
numerous code paths. If the node comes back, its possible for there to be
multiple node structures for the same device on the vport node list. There
is no reason to keep the node structure around after it is no longer in
existence, and the current implementation creates problems for itself
(multiple nodes) and lots of unnecessary code for state validation.

Additionally, the reference taking on the node structure didn't follow the
normal model used by the kernel kref api. It included lots of odd logic to
match state with reference count.  The combination of this odd logic plus
the way it was implicitly used in the discovery engine made its reference
taking implementation suspect and extremely hard to follow.

Change the driver such that the reference taking routines are now normal
ref increments/decrements and callout on refcount=0.

With this in place, the rework can be done such that the node structure is
fully removed and deallocated when the remote port no longer exists and all
references are removed.  This removal logic, and the basic ref counting are
intrically tied, thus in a single patch.

Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: be2iscsi: Mark beiscsi_attrs with static keyword

Fix the following sparse warning:

./be_main.c:167:25: warning: symbol 'beiscsi_attrs' was not declared. Should it be static?

Link: https://lore.kernel.org/r/1605339474-22329-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-qcom: Only select QCOM_SCM if SCSI_UFS_CRYPTO

QCOM_SCM is only needed to make the qcom_scm_*() calls in ufs-qcom-ice.c,
which is only compiled when SCSI_UFS_CRYPTO=y.  So don't unnecessarily
enable QCOM_SCM when SCSI_UFS_CRYPTO=n.

Link: https://lore.kernel.org/r/20201114004754.235378-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Strip out a bunch of set but unused variables

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/hpsa.c: In function ‘hpsa_volume_offline’:
 drivers/scsi/hpsa.c:3885:5: warning: variable ‘scsi_status’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/hpsa.c:3884:6: warning: variable ‘cmd_status’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/hpsa.c: In function ‘hpsa_update_scsi_devices’:
 drivers/scsi/hpsa.c:4354:9: warning: variable ‘n_ext_target_devs’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/hpsa.c: In function ‘hpsa_scatter_gather’:
 drivers/scsi/hpsa.c:4583:36: warning: variable ‘last_sg’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/hpsa.c: In function ‘hpsa_init_one’:
 drivers/scsi/hpsa.c:8639:6: warning: variable ‘dac’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/hpsa.c: In function ‘hpsa_enter_performant_mode’:
 drivers/scsi/hpsa.c:9300:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20201112101929.GC1997862@dell
Cc: Don Brace <don.brace@microchip.com>
Cc: Bugfixes to <esc.storagedev@microsemi.com>
Cc: storagedev@microchip.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add retry flow for failed HBA enabling

Once HBA enabling has failed, add retry mechanism and allow vendors to
apply specific tweaks before the next retry. For example, vendors can do
vendor-specific host reset flow in variant function
"ufshcd_vops_hce_enable_notify()".

Link: https://lore.kernel.org/r/20201112054537.22494-1-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update version to 1.2.16-012

Link: https://lore.kernel.org/r/160512629093.2359.13675060282143622110.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Correct pqi_sas_smp_handler busy condition

Remove unbalanced call to pqi_ctrl_unbusy.

Link: https://lore.kernel.org/r/160512628513.2359.17193493825283879603.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Correct driver removal with HBA disks

Correct rmmod hangs when using HBA disks with write cache enabled.

Do not set controller flag "in_shutdown" during rmmod. SCSI SYNCHRONIZE
CACHE(10) and SCSI SYNCHRONIZE CACHE(16) requests were blocked with
SCSI_MLQUEUE_HOST_BUSY.

Link: https://lore.kernel.org/r/160512627928.2359.10698615071827614781.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove unused variable 'value'

Hasn't been used since 2009.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’:
 drivers/scsi/pm8001/pm8001_hwi.c:415:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20201116104119.816527-1-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fix -Wformat for scsi_host

Clang is more aggressive about -Wformat warnings when the format flag
specifies a type smaller than the parameter. Turns out, struct Scsi_Host's
member can_queue is actually an int. Fixes:

[-Wformat]
shost_rd_attr(can_queue, "%hd\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                          %d

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://lore.kernel.org/r/20201107081132.2629071-1-ndesaulniers@google.com
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
warning: format specifies type 'short' but the argument has type 'int'

scsi: core: Replace while-loop by for-loop in scsi_vpd_lun_id()

This makes the code slightly more readable.

Link: https://lore.kernel.org/r/20201029170846.14786-2-mwilck@suse.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fix VPD LUN ID designator priorities

The current implementation of scsi_vpd_lun_id() uses the designator length
as an implicit measure of priority. This works most of the time, but not
always. For example, some Hitachi storage arrays return this in VPD 0x83:

VPD INQUIRY: Device Identification page
  Designation descriptor number 1, descriptor length: 24
    designator_type: T10 vendor identification,  code_set: ASCII
    associated with the Addressed logical unit
      vendor id: HITACHI
      vendor specific: 5030C3502025
  Designation descriptor number 2, descriptor length: 6
    designator_type: vendor specific [0x0],  code_set: Binary
    associated with the Target port
      vendor specific: 08 03
  Designation descriptor number 3, descriptor length: 20
    designator_type: NAA,  code_set: Binary
    associated with the Addressed logical unit
      NAA 6, IEEE Company_id: 0x60e8
      Vendor Specific Identifier: 0x7c35000
      Vendor Specific Identifier Extension: 0x30c35000002025
      [0x60060e8007c350000030c35000002025]

The current code would use the first descriptor because it's longer than
the NAA descriptor. But this is wrong, the kernel is supposed to prefer NAA
descriptors over T10 vendor ID. Designator length should only be used to
compare designators of the same type.

This patch addresses the issue by separating designator priority and
length.

Link: https://lore.kernel.org/r/20201029170846.14786-1-mwilck@suse.com
Fixes: 9983bed3907c ("scsi: Add scsi_vpd_lun_id()")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: Fix comparison to bool warning

Fix the following coccicheck warning:

./drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2089:5-23: WARNING: Comparison to bool
./drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2187:5-23: WARNING: Comparison to bool

Link: https://lore.kernel.org/r/1604767920-8361-1-git-send-email-kaixuxia@tencent.com
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: isci: Don't use PCI helper functions

PCI helper functions such as pci_enable/disable_device(),
pci_save/restore_state(), pci_set_power_state(), etc. were used by the
legacy framework to perform standard operations related to PCI PM.

This driver is using the generic framework and thus calls for those
functions should be dropped as those tasks are now performed by the PCI
core.

Link: https://lore.kernel.org/r/20201107100420.149521-1-vaibhavgupta40@gmail.com
Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Add HS-G4 support

Provide HS-G4 support in MediaTek UFS platforms.

To support HS-G4, introduce mechanism to get the MediaTek UFS controller
version. With such information, driver can make right decision to apply
different configurations in different controllers.

Link: https://lore.kernel.org/r/20201029115750.24391-7-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add enums for UniPro version higher than 1.6

Some vendors need newer UniPro version to decide if some features can be
enabled or not.

Simply add missing enums for the latest UniPro versions.

Link: https://lore.kernel.org/r/20201029115750.24391-6-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Support option to disable auto-hibern8

Support an option to allow users to disable auto-hibern8 feature.

Instead, enable hibern8-during-clk-gating feature to keep similar power
consumption.

Link: https://lore.kernel.org/r/20201029115750.24391-5-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Decouple features from platform bindings

UFS proprietary features (including features introduced later) in MediaTek
UFS platforms have complicated combinations among different platforms.

To ease code readability and maintenance, decouple all proprietary features
from platform bindings. Each feature would be enabled only if specific
property string is defined in device tree node.

Link: https://lore.kernel.org/r/20201029115750.24391-4-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Support VA09 regulator operations

Some MediaTek UFS platforms need to control VA09 power
specifically. Provide such control according to the device tree binding.

Link: https://lore.kernel.org/r/20201029115750.24391-3-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Assign arguments with correct type

In ufs_mtk_unipro_set_lpm(), use specific unsigned values as the argument
to invoke ufshcd_dme_set().

At the same time, change the name of ufs_mtk_unipro_set_pm() to
ufs_mtk_unipro_set_lpm() to align the naming convention in MediaTek UFS
driver.

Link: https://lore.kernel.org/r/20201029115750.24391-2-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Return BLK_STS_AGAIN for ALUA transitioning

Whenever we encounter a sense code of ALUA transitioning in
scsi_io_completion() it means that the SCSI midlayer ran out of retries
trying to wait for ALUA transitioning.  In these cases we should be passing
up the error, but signalling that the I/O might be retried, preferably on
another path.  So return BLK_STS_AGAIN in these cases.

[mkp: typo + fallthrough]

Link: https://lore.kernel.org/r/20200930080256.90964-5-hare@suse.de
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_dh_alua: Set 'transitioning' state on Unit Attention

We should be setting the 'transitioning' ALUA state once we get a Unit
Attention indicating the array is in transitioning.  There are arrays which
cannot respond to an RTPG while in transitioning, and others have issues
correctly reporting the state.  So better to set the state during Unit
Attention handling and wait for TUR / RTPG to run its course.

Link: https://lore.kernel.org/r/20200930080256.90964-4-hare@suse.de
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_dh_alua: Return BLK_STS_AGAIN for ALUA transitioning state

When the ALUA state indicates transitioning we should not retry the command
immediately, but rather complete the command with BLK_STS_AGAIN to signal
the completion handler that it might be retried.  This allows multipathing
to redirect the command to another path if possible, and avoid stalls
during lengthy transitioning times.

Link: https://lore.kernel.org/r/20200930080256.90964-3-hare@suse.de
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>