HID: multitouch: Add memory barriers

commit be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.

This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.

I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.

Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: handle -EBUSY first in lock arg validation

commit 44637ca41d551d409a481117b07fa209b330fca9 upstream.

During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: fix race between test_bit() and queue_work()

commit eef6ec9bf390e836a6c4029f3620fe49528aa1fe upstream.

This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.

The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Fix handling of real but unexpected device interrupts

commit 301c8f5c32c8fb79c67539bc23972dc3ef48024c upstream.

Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").

I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:

- Issue happens when resuming from S3 but not when resuming from
  "s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
  system enters into pci_pm_resume_noirq() while all other i2c_designware
  PCI devices are in D3. Devices were runtime suspended and in D3 prior
  entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
  re-enabled
- According to register dump the interrupt really comes from the
  i2c_designware.0. Controller is enabled, I2C target address register
  points to a one detectable I2C device address 0x60 and the
  DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
  TX_EMPTY bits are set indicating completed I2C transaction.

My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.

I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).

Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.

Fixes: c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix minimum clock limit

commit 6e141772e6465f937458b35ddcfd0a981b6f5280 upstream.

The Spreadtrum controller supports 100KHz minimal clock rate, which means
that the current value 400KHz is wrong.

Unfortunately this has also lead to fail to initialize some cards, which
are allowed to require 100KHz to work. So, let's fix the problem by
changing the minimal supported clock rate to 100KHz.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221011104935.10980-1-wenchao.chen666@gmail.com
[Ulf: Clarified to commit-message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix CAN state after restart

commit 0be1a655fe68c8e6dcadbcbddb69cf2fb29881f5 upstream.

can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.

Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().

Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix TX queue out of sync after restart

commit 455561fb618fde40558776b5b8435f9420f335db upstream.

The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.

Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.

Fix that by resetting TX bookkeeping on CAN restart.

Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix overread with an invalid command

commit 1499ecaea9d2ba68d5e18d80573b4561a8dc4ee7 upstream.

For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.

This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).

Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.

Fix that by verifying the length of command before handling it.

This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix use of uninitialized completion

commit cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream.

flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.

This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).

Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.

This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add quirks for Lenovo OneLink+ Dock

commit 37d49519b41405b08748392c6a7f193d9f77ecd2 upstream.

The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream

These hubs suffer from two separate problems:

1) After the host system was suspended and woken up, the hubs appear to
   be in a random state. Some downstream ports (both internal to the
   built-in audio and network controllers, and external to USB sockets)
   may no longer be functional. The exact list of disabled ports (if
   any) changes from wakeup to wakeup. Ports remain in that state until
   the dock is power-cycled, or until the laptop is rebooted.

   Wakeup sources connected to the hubs (keyboard, WoL on the integrated
   gigabit controller) will wake the system up from suspend, but they
   may no longer work after wakeup (and in that case will no longer work
   as wakeup source in a subsequent suspend-wakeup cycle).

   This issue appears in the logs with messages such as:

     usb 1-6.1-port4: cannot disable (err = -71)
     usb 1-6-port2: cannot disable (err = -71)
     usb 1-6.1: clear tt 1 (80c0) error -71
     usb 1-6-port4: cannot disable (err = -71)
     usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71
     usb 1-6.4: PM: failed to resume async: error -71
     usb 1-7: reset full-speed USB device number 5 using xhci_hcd
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
     usb 1-6.1-port1: cannot disable (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
     usb 1-6.1-port1: cannot disable (err = -71)

2) Some USB devices cannot be enumerated properly. So far I have only
   seen the issue with USB 3.0 devices. The same devices work without
   problem directly connected to the host system, to other systems or to
   other hubs (even when those hubs are connected to the OneLink+ dock).

   One very reliable reproducer is this USB 3.0 HDD enclosure:
   152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius

   I have seen it happen sporadically with other USB 3.0 enclosures,
   with controllers from different manufacturers, all self-powered.

   Typical messages in the logs:

     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 6, error -62
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 7, error -62
     usb 2-1-port4: attempt power cycle
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 8, error -62
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 9, error -62
     usb 2-1-port4: unable to enumerate USB device

Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved
the second issue. Further testing then uncovered the first issue. Test
results are summarized in this table:

=======================================================================================
Settings                        USB2 hotplug    USB3 hotplug    State after waking up
---------------------------------------------------------------------------------------

power/control=auto              works           fails           broken

usbcore.autosuspend=-1          works           works           broken
OR power/control=on

power/control=auto              works (1)       works (1)       works
and USB_QUIRK_RESET_RESUME

power/control=on                works           works           works
and USB_QUIRK_RESET_RESUME

HUB_QUIRK_DISABLE_AUTOSUSPEND   works           works           works
and USB_QUIRK_RESET_RESUME

=======================================================================================

In those results, the power/control settings are applied to both hubs,
both on the USB2 and USB3 side, before each test.

From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs
properly after a suspend-wakeup cycle, and the hubs must not autosuspend
to work around the USB3 issue.

A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs'
upstream links from suspending (the downstream ports can still suspend).
This secondary effect is used in results (1). It is enough to solve the
USB3 problem.

Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that
solves both issues.

Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via
the kernel command line for over a year without noticing any side
effect.

Thanks to Oliver Neukum @Suse for explanations of the operations of
USB_QUIRK_RESET_RESUME, and requesting more testing.

Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: dbc: Fix memory leak in xhci_alloc_dbc()

commit d591b32e519603524a35b172156db71df9116902 upstream.

If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak.

Fixes: 534675942e90 ("xhci: dbc: refactor xhci_dbc_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: dps310: Reset chip after timeout

commit 7b4ab4abcea4c0c10b25187bf2569e5a07e9a20c upstream.

The DPS310 chip has been observed to get "stuck" such that pressure
and temperature measurements are never indicated as "ready" in the
MEAS_CFG register. The only solution is to reset the device and try
again. In order to avoid continual failures, use a boolean flag to
only try the reset after timeout once if errors persist.

Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310")
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: dps310: Refactor startup procedure

commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.

Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.

Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7923: fix channel readings for some variants

commit f4f43f01cff2f29779343ade755191afd2581c77 upstream.

Some of the supported devices have 4 or 2 LSB trailing bits that should
not be taken into account. Hence we need to shift these bits out which
fits perfectly on the scan type shift property. This change fixes both
raw and buffered reads.

Fixes: f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924")
Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltc2497: Fix reading conversion results

commit 7f4f1096d5921f5d90547596f9ce80e0b924f887 upstream.

After the result of the previous conversion is read the chip
automatically starts a new conversion and doesn't accept new i2c
transfers until this conversion is completed which makes the function
return failure.

So add an early return iff the programming of the new address isn't
needed. Note this will not fix the problem in general, but all cases
that are currently used. Once this changes we get the failure back, but
this can be addressed when the need arises.

Fixes: 69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ")
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Denys Zagorui <dzagorui@cisco.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5593r: Fix i2c read protocol requirements

commit 558a25f903b4af6361b7fbeea08a6446a0745653 upstream.

For reliable operation across the full range of supported
interface rates, the AD5593R needs a STOP condition between
address write, and data read (like show in the datasheet Figure 40)
so in turn i2c_smbus_read_word_swapped cannot be used.

While at it, a simple helper was added to make the code simpler.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message

commit e98ecc6e94f4e6d21c06660b0f336df02836694f upstream.

Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.

This maybe leak some info through network because not initialize the
message body.

After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes.

Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: <stable@vger.kernel.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: destage dirty pages before re-reading them for cache=none

commit bb44c31cdcac107344dd2fcc3bd0504a53575c51 upstream.

This is the opposite case of kernel bugzilla 216301.
If we mmap a file using cache=none and then proceed to update the mmapped
area these updates are not reflected in a later pread() of that part of the
file.
To fix this we must first destage any dirty pages in the range before
we allow the pread() to proceed.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix race between VF offering and VF association message from host

commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream.

During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.

And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.

Cc: stable@vger.kernel.org
Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/net: don't update msg_name if not provided

commit 6f10ae8a155446248055c7ddd480ef40139af788 upstream.

io_sendmsg_copy_hdr() may clear msg->msg_name if the userspace didn't
provide it, we should retain NULL in this case.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/97d49f61b5ec76d0900df658cfde3aa59ff22121.1664486545.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: atmel: Unmap streaming DMA mappings

commit 1161703c9bd664da5e3b2eb1a3bb40c210e026ea upstream.

Every dma_map_single() call should have its dma_unmap_single() counterpart,
because the DMA address space is a shared resource and one could render the
machine unusable by consuming all DMA addresses.

Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Cc: stable@vger.kernel.org
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Intel Reference SSID to support headset keys

commit 4f2e56a59b9947b3e698d3cabcb858765c12b1e8 upstream.

This patch fixes the issue with 3.5mm headset keys
on RPL-P platform.

[ Rearranged the entry in SSID order by tiwai ]

Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Ninad Naik <ninad.naik@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011044916.2278867-1-saranya.gopal@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS GV601R laptop

commit 2ea8e1297801f7b0220ebf6ae61a5b74ca83981e upstream.

The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.

Add a quirk to use the same DAC pairs as the G14.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010070347.36883-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Correct pin configs for ASUS G533Z

commit 66ba7c88507344dee68ad1acbdb630473ab36114 upstream.

The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.

Enables headphone jack, and 5.1 surround.

[ corrected the indent level by tiwai ]

Fixes: bc2c23549ccd ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530

commit 417b9c51f59734d852e47252476fadc293ad994a upstream.

After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.

Fixes: 1885ff13d4c4 ("ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop")
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yz0uyN1zwZhnyRD6@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix NULL dererence at error path

commit 568be8aaf8a535f79c4db76cabe17b035aa2584d upstream.

At an error path to release URB buffers and contexts, the driver might
hit a NULL dererence for u->urb pointer, when u->buffer_size has been
already set but the actual URB allocation failed.

Fix it by adding the NULL check of urb.  Also, make sure that
buffer_size is cleared after the error path or the close.

Cc: <stable@vger.kernel.org>
Reported-by: Sabri N. Ferreiro <snferreiro1@gmail.com>
Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com
Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix potential memory leaks

commit 6382da0828995af87aa8b8bef28cc61aceb4aff3 upstream.

When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources.  However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.

Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()

commit a70aef7982b012e86dfd39fbb235e76a21ae778a upstream.

The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.

Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.

Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: oss: Fix potential deadlock at unregistration

commit 97d917879d7f92df09c3f21fd54609a8bcd654b2 upstream.

We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices.  This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.

Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too.  The call is
race-safe as the function has a spinlock protection by itself.

Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "fs: check FMODE_LSEEK to control internal pipe splicing"

This reverts commit fd0a6e99b61e6c08fa5cf585d54fd956f70c73a6.

Which was upstream commit 97ef77c52b789ec1411d360ed99dca1efe4b2c81.

The commit is missing dependencies and breaks NFS tests, remove it for
now.

Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.74

Link: https://lore.kernel.org/r/20221013175143.518476113@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221014082515.704103805@linuxfoundation.org
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: fix MBSSID parsing use-after-free

commit ff05d4b45dd89b922578dac497dcabf57cf771c6

When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.

Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.

The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.

This fixes CVE-2022-42719.

Fixes: 5023b14cf4df ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix memory leaks with element parsing

commit 8223ac199a3849257e86ec27865dc63f034b1cf1 upstream.

My previous commit 5d24828d05f3 ("mac80211: always allocate
struct ieee802_11_elems") had a few bugs and leaked the new
allocated struct in a few error cases, fix that.

Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20211001211108.9839928e42e0.Ib81ca187d3d3af7ed1bfeac2e00d08a4637c8025@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: always allocate struct ieee802_11_elems

As the 802.11 spec evolves, we need to parse more and more
elements. This is causing the struct to grow, and we can no
longer get away with putting it on the stack.

Change the API to always dynamically allocate and return an
allocated pointer that must be kfree()d later.

As an alternative, I contemplated a scheme whereby we'd say
in the code which elements we needed, e.g.

    DECLARE_ELEMENT_PARSER(elems,
                           SUPPORTED_CHANNELS,
                           CHANNEL_SWITCH,
                           EXT(KEY_DELIVERY));

    ieee802_11_parse_elems(..., &elems, ...);

and while I think this is possible and will save us a lot
since most individual places only care about a small subset
of the elements, it ended up being a bit more work since a
lot of places do the parsing and then pass the struct to
other functions, sometimes with multiple levels.

Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: mlme: find auth challenge directly

commit 49a765d6785e99157ff5091cc37485732496864e upstream.

There's no need to parse all elements etc. just to find the
authentication challenge - use cfg80211_find_elem() instead.
This also allows us to remove WLAN_EID_CHALLENGE handling
from the element parsing entirely.

Link: https://lore.kernel.org/r/20210920154009.45f9b3a15722.Ice3159ffad03a007d6154cbf1fb3a8c48489e86f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: move CRC into struct ieee802_11_elems

commit c6e37ed498f958254b5459253199e816b6bfc52f upstream.

We're currently returning this value, but to prepare for
returning the allocated structure, move it into there.

Link: https://lore.kernel.org/r/20210920154009.479b8ebf999d.If0d4ba75ee38998dc3eeae25058aa748efcb2fc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: mesh: clean up rx_bcn_presp API

commit a5b983c6073140b624f64e79fea6d33c3e4315a0 upstream.

We currently pass the entire elements to the rx_bcn_presp()
method, but only need mesh_config. Additionally, we use the
length of the elements to calculate back the entire frame's
length, but that's confusing - just pass the length of the
frame instead.

Link: https://lore.kernel.org/r/20210920154009.a18ed3d2da6c.I1824b773a0fbae4453e1433c184678ca14e8df45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic

commit 8e30538eca016de8e252bef174beadecd64239f0 upstream.

The dma_map_single() doesn't permit zero length mapping. It causes a follow
panic.

A panic was reported on arm64:

[   60.137988] ------------[ cut here ]------------
[   60.142630] kernel BUG at kernel/dma/swiotlb.c:624!
[   60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l
2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn
c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl
[   60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237
[   60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[   60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590
[   60.213149] lr : swiotlb_map+0x88/0x1f0
[   60.216982] sp : ffff80000a883bc0
[   60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000
[   60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0
[   60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000
[   60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000
[   60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180
[   60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000
[   60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[   60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000
[   60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001
[   60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010
[   60.291658] Call trace:
[   60.294100]  swiotlb_tbl_map_single+0x2c0/0x590
[   60.298629]  swiotlb_map+0x88/0x1f0
[   60.302115]  dma_map_page_attrs+0x188/0x230
[   60.306299]  pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test]
[   60.312660]  __arm64_sys_ioctl+0xa8/0xf0
[   60.316583]  invoke_syscall+0x44/0x108
[   60.320334]  el0_svc_common.constprop.0+0xcc/0xf0
[   60.325038]  do_el0_svc+0x2c/0xb8
[   60.328351]  el0_svc+0x2c/0x88
[   60.331406]  el0t_64_sync_handler+0xb8/0xc0
[   60.335587]  el0t_64_sync+0x18c/0x190
[   60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000)
[   60.345344] ---[ end trace 0000000000000000 ]---

To fix it, this patch adds a checking the payload length if it is zero.

Fixes: 343dc693f7b7 ("misc: pci_endpoint_test: Prevent some integer overflows")
Cc: stable <stable@kernel.org>
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20220907020100.122588-2-mie@igel.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pci_endpoint_test: Aggregate params checking for xfer

commit 3e42deaac06567c7e86d287c305ccda24db4ae3d upstream.

Each transfer test functions have same parameter checking code. This patch
unites those to an introduced function.

Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220907020100.122588-1-mie@igel.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - fix wireless 360 controller breaking after suspend

commit a17b9841152e7f4621619902b347e2cc39c32996 upstream.

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - add supported devices as contributed on github

commit b382c5e37344883dc97525d05f1f6b788f549985 upstream.

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: update hidden BSSes to avoid WARN_ON

commit c90b93b5b782891ebfda49d4e5da36632fefd5d1 upstream.

When updating beacon elements in a non-transmitted BSS,
also update the hidden sub-entries to the same beacon
elements, so that a future update through other paths
won't trigger a WARN_ON().

The warning is triggered because the beacon elements in
the hidden BSSes that are children of the BSS should
always be the same as in the parent.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: fix crash in beacon protection for P2P-device

commit b2d03cabe2b2e150ff5a381731ea0355459be09f upstream.

If beacon protection is active but the beacon cannot be
decrypted or is otherwise malformed, we call the cfg80211
API to report this to userspace, but that uses a netdev
pointer, which isn't present for P2P-Device. Fix this to
call it only conditionally to ensure cfg80211 won't crash
in the case of P2P-Device.

This fixes CVE-2022-42722.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaf183af741 ("mac80211: Report beacon protection failures to user space")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211_hwsim: avoid mac80211 warning on bad rate

commit 1833b6f46d7e2830251a063935ab464256defe22 upstream.

If the tool on the other side (e.g. wmediumd) gets confused
about the rate, we hit a warning in mac80211. Silence that
by effectively duplicating the check here and dropping the
frame silently (in mac80211 it's dropped with the warning).

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: avoid nontransmitted BSS list corruption

commit bcca852027e5878aec911a347407ecc88d6fff7f upstream.

If a non-transmitted BSS shares enough information (both
SSID and BSSID!) with another non-transmitted BSS of a
different AP, then we can find and update it, and then
try to add it to the non-transmitted BSS list. We do a
search for it on the transmitted BSS, but if it's not
there (but belongs to another transmitted BSS), the list
gets corrupted.

Since this is an erroneous situation, simply fail the
list insertion in this case and free the non-transmitted
BSS.

This fixes CVE-2022-42721.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: fix BSS refcounting bugs

commit 0b7808818cb9df6680f98996b8e9a439fa7bcc2f upstream.

There are multiple refcounting bugs related to multi-BSSID:
 - In bss_ref_get(), if the BSS has a hidden_beacon_bss, then
   the bss pointer is overwritten before checking for the
   transmitted BSS, which is clearly wrong. Fix this by using
   the bss_from_pub() macro.

 - In cfg80211_bss_update() we copy the transmitted_bss pointer
   from tmp into new, but then if we release new, we'll unref
   it erroneously. We already set the pointer and ref it, but
   need to NULL it since it was copied from the tmp data.

 - In cfg80211_inform_single_bss_data(), if adding to the non-
   transmitted list fails, we unlink the BSS and yet still we
   return it, but this results in returning an entry without
   a reference. We shouldn't return it anyway if it was broken
   enough to not get added there.

This fixes CVE-2022-42720.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: a3584f56de1c ("cfg80211: Properly track transmitting and non-transmitting BSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: ensure length byte is present before access

commit 567e14e39e8f8c6997a1378bc3be615afca86063 upstream.

When iterating the elements here, ensure the length byte is
present before checking it to see if the entire element will
fit into the buffer.

Longer term, we should rewrite this code using the type-safe
element iteration macros that check all of this.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211/mac80211: reject bad MBSSID elements

commit 8f033d2becc24aa6bfd2a5c104407963560caabc upstream.

Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).

Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.

This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.

I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f81532 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()

commit aebe9f4639b13a1f4e9a6b42cdd2e38c617b442d upstream.

In the copy code of the elements, we do the following calculation
to reach the end of the MBSSID element:

/* copy the IEs after MBSSID */
cpy_len = mbssid[1] + 2;

This looks fine, however, cpy_len is a u8, the same as mbssid[1],
so the addition of two can overflow. In this case the subsequent
memcpy() will overflow the allocated buffer, since it copies 256
bytes too much due to the way the allocation and memcpy() sizes
are calculated.

Fix this by using size_t for the cpy_len variable.

This fixes CVE-2022-41674.

Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: use expired timer rather than wq for mixing fast pool

commit 748bc4dd9e663f23448d8ad7e58c011a67ea1eca upstream.

Previously, the fast pool was dumped into the main pool periodically in
the fast pool's hard IRQ handler. This worked fine and there weren't
problems with it, until RT came around. Since RT converts spinlocks into
sleeping locks, problems cropped up. Rather than switching to raw
spinlocks, the RT developers preferred we make the transformation from
originally doing:

    do_some_stuff()
    spin_lock()
    do_some_other_stuff()
    spin_unlock()

to doing:

    do_some_stuff()
    queue_work_on(some_other_stuff_worker)

This is an ordinary pattern done all over the kernel. However, Sherry
noticed a 10% performance regression in qperf TCP over a 40gbps
InfiniBand card. Quoting her message:

> MT27500 Family [ConnectX-3] cards:
> Infiniband device 'mlx4_0' port 1 status:
> default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1
> base lid: 0x6
> sm lid: 0x1
> state: 4: ACTIVE
> phys state: 5: LinkUp
> rate: 40 Gb/sec (4X QDR)
> link_layer: InfiniBand
>
> Cards are configured with IP addresses on private subnet for IPoIB
> performance testing.
> Regression identified in this bug is in TCP latency in this stack as reported
> by qperf tcp_lat metric:
>
> We have one system listen as a qperf server:
> [root@yourQperfServer ~]# qperf
>
> Have the other system connect to qperf server as a client (in this
> case, it’s X7 server with Mellanox card):
> [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat

Rather than incur the scheduling latency from queue_work_on, we can
instead switch to running on the next timer tick, on the same core. This
also batches things a bit more -- once per jiffy -- which is okay now
that mix_interrupt_randomness() can credit multiple bits at once.

Reported-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Paul Webb <paul.x.webb@oracle.com>
Cc: Sherry Yang <sherry.yang@oracle.com>
Cc: Phillip Goerl <phillip.goerl@oracle.com>
Cc: Jack Vogel <jack.vogel@oracle.com>
Cc: Nicky Veitch <nicky.veitch@oracle.com>
Cc: Colm Harrington <colm.harrington@oracle.com>
Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: stable@vger.kernel.org
Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: avoid reading two cache lines on irq randomness

commit 9ee0507e896b45af6d65408c77815800bce30008 upstream.

In order to avoid reading and dirtying two cache lines on every IRQ,
move the work_struct to the bottom of the fast_pool struct. add_
interrupt_randomness() always touches .pool and .count, which are
currently split, because .mix pushes everything down. Instead, move .mix
to the bottom, so that .pool and .count are always in the first cache
line, since .mix is only accessed when the pool is full.

Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "crypto: qat - reduce size of mapped region"

commit 9c5f21b198d259bfe1191b1fedf08e2eab15b33b upstream.

This reverts commit e48767c17718067ba21fb2ef461779ec2506f845.

In an attempt to resolve a set of warnings reported by the static
analyzer Smatch, the reverted commit improperly reduced the sizes of the
DMA mappings used for the input and output parameters for both RSA and
DH creating a mismatch (map size=8 bytes, unmap size=64 bytes).

This issue is reported when CONFIG_DMA_API_DEBUG is selected, when the
crypto self test is run. The function dma_unmap_single() reports a
warning similar to the one below, saying that the `device driver frees
DMA memory with different size`.

    DMA-API: 4xxx 0000:06:00.0: device driver frees DMA memory with different size [device address=0x0000000123206c80] [map size=8 bytes] [unmap size=64 bytes]
    WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:973 check_unmap+0x3d0/0x8c0\
    ...
    Call Trace:
    <IRQ>
    debug_dma_unmap_page+0x5c/0x60
    qat_dh_cb+0xd7/0x110 [intel_qat]
    qat_alg_asym_callback+0x1a/0x30 [intel_qat]
    adf_response_handler+0xbd/0x1a0 [intel_qat]
    tasklet_action_common.constprop.0+0xcd/0xe0
    __do_softirq+0xf8/0x30c
    __irq_exit_rcu+0xbf/0x140
    common_interrupt+0xb9/0xd0
    </IRQ>
    <TASK>

The original commit was correct.

Cc: <stable@vger.kernel.org>
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "powerpc/rtas: Implement reentrant rtas call"

commit f88aabad33ea22be2ce1c60d8901942e4e2a9edb upstream.

At the time this was submitted by Leonardo, I confirmed -- or thought
I had confirmed -- with PowerVM partition firmware development that
the following RTAS functions:

- ibm,get-xive
- ibm,int-off
- ibm,int-on
- ibm,set-xive

were safe to call on multiple CPUs simultaneously, not only with
respect to themselves as indicated by PAPR, but with arbitrary other
RTAS calls:

https://lore.kernel.org/linuxppc-dev/875zcy2v8o.fsf@linux.ibm.com/

Recent discussion with firmware development makes it clear that this
is not true, and that the code in commit b664db8e3f97 ("powerpc/rtas:
Implement reentrant rtas call") is unsafe, likely explaining several
strange bugs we've seen in internal testing involving DLPAR and
LPM. These scenarios use ibm,configure-connector, whose internal state
can be corrupted by the concurrent use of the "reentrant" functions,
leading to symptoms like endless busy statuses from RTAS.

Fixes: b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220907220111.223267-1-nathanl@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: qcserial: add new usb-id for Dell branded EM7455

commit eee48781ea199e32c1d0c4732641c494833788ca upstream.

Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: stex: Properly zero out the passthrough command structure

commit 6022f210461fef67e6e676fd8544ca02d1bcfa7a upstream.

The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage.  Switch things to be statically allocated which will fill the
unused fields with 0 automatically.

Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com
Cc: stable@kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: hdthky <hdthky0@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Correct Macmini DMI match in uefi cert quirk

commit bab715bdaa9ebf28d99a6d1efb2704a30125e96d upstream.

It turns out Apple doesn't capitalise the "mini" in "Macmini" in DMI, which
is inconsistent with other model line names.

Correct the capitalisation of Macmini in the quirk for skipping loading
platform certs on T2 Macs.

Currently users get:

------------[ cut here ]------------
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffa30640054000
WARNING: CPU: 1 PID: 8 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x55/0xe0
Modules linked in:
CPU: 1 PID: 8 Comm: kworker/u12:0 Not tainted 5.18.14-arch1-2-t2 #1 4535eb3fc40fd08edab32a509fbf4c9bc52d111e
Hardware name: Apple Inc. Macmini8,1/Mac-7BA5B2DFE22DDD8C, BIOS 1731.120.10.0.0 (iBridge: 19.16.15071.0.0,0) 04/24/2022
Workqueue: efi_rts_wq efi_call_rts
...
---[ end trace 0000000000000000 ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list

Fixes: 155ca952c7ca ("efi: Do not import certificates from UEFI Secure Boot for T2 Macs")
Cc: stable@vger.kernel.org
Cc: Aditya Garg <gargaditya08@live.com>
Tested-by: Samuel Jiang <chyishian.jiang@gmail.com>
Signed-off-by: Orlando Chamberlain <redecorating@protonmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix position reporting on Poulsbo

commit 56e696c0f0c71b77fff921fc94b58a02f0445b2c upstream.

Hans reported that his Sony VAIO VPX11S1E showed the broken sound
behavior at the start of the stream for a couple of seconds, and it
turned out that the position_fix=1 option fixes the issue.  It implies
that the position reporting is inaccurate, and very likely hitting on
all Poulsbo devices.

The patch applies the workaround for Poulsbo generically to switch to
LPIB mode instead of the default position buffer.

Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3e8697e1-87c6-7a7b-d2e8-b21f1d2f181b@redhat.com
Link: https://lore.kernel.org/r/20221001142124.7241-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: clamp credited irq bits to maximum mixed

commit e78a802a7b4febf53f2a92842f494b01062d85a8 upstream.

Since the most that's mixed into the pool is sizeof(long)*2, don't
credit more than that many bytes of entropy.

Fixes: e3e33fc2ea7f ("random: do not use input pool from hard IRQs")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: restore O_NONBLOCK support

commit cd4f24ae9404fd31fc461066e57889be3b68641b upstream.

Prior to 5.6, when /dev/random was opened with O_NONBLOCK, it would
return -EAGAIN if there was no entropy. When the pools were unified in
5.6, this was lost. The post 5.6 behavior of blocking until the pool is
initialized, and ignoring O_NONBLOCK in the process, went unnoticed,
with no reports about the regression received for two and a half years.
However, eventually this indeed did break somebody's userspace.

So we restore the old behavior, by returning -EAGAIN if the pool is not
initialized. Unlike the old /dev/random, this can only occur during
early boot, after which it never blocks again.

In order to make this O_NONBLOCK behavior consistent with other
expectations, also respect users reading with preadv2(RWF_NOWAIT) and
similar.

Fixes: 30c08efec888 ("random: make /dev/random be almost like /dev/urandom")
Reported-by: Guozihua <guozihua@huawei.com>
Reported-by: Zhongguohua <zhongguohua1@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: don't truncate file in atomic_open

commit 7cb9994754f8a36ae9e5ec4597c5c4c2d6c03832 upstream.

Clear O_TRUNC from the flags sent in the MDS create request.

`atomic_open' is called before permission check. We should not do any
modification to the file here. The caller will do the truncation
afterward.

Fixes: 124e68e74099 ("ceph: file operations")
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[Xiubo: fixed a trivial conflict for 5.19 backport]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure

commit 723ac751208f6d6540191689cfbf6c77135a7a1b upstream.

If creation or finalization of a checkpoint fails due to anomalies in the
checkpoint metadata on disk, a kernel warning is generated.

This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted
with panic_on_warn, does not panic.  A nilfs_error is appropriate here to
handle the abnormal filesystem condition.

This also replaces the detected error codes with an I/O error so that
neither of the internal error codes is returned to callers.

Link: https://lkml.kernel.org/r/20220929123330.19658-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+fbb3e0b24e8dae5a16ee@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix leak of nilfs_root in case of writer thread creation failure

commit d0d51a97063db4704a5ef6bc978dddab1636a306 upstream.

If nilfs_attach_log_writer() failed to create a log writer thread, it
frees a data structure of the log writer without any cleanup.  After
commit e912a5b66837 ("nilfs2: use root object to get ifile"), this causes
a leak of struct nilfs_root, which started to leak an ifile metadata inode
and a kobject on that struct.

In addition, if the kernel is booted with panic_on_warn, the above
ifile metadata inode leak will cause the following panic when the
nilfs2 kernel module is removed:

  kmem_cache_destroy nilfs2_inode_cache: Slab cache still has objects when
  called from nilfs_destroy_cachep+0x16/0x3a [nilfs2]
  WARNING: CPU: 8 PID: 1464 at mm/slab_common.c:494 kmem_cache_destroy+0x138/0x140
  ...
  RIP: 0010:kmem_cache_destroy+0x138/0x140
  Code: 00 20 00 00 e8 a9 55 d8 ff e9 76 ff ff ff 48 8b 53 60 48 c7 c6 20 70 65 86 48 c7 c7 d8 69 9c 86 48 8b 4c 24 28 e8 ef 71 c7 00 <0f> 0b e9 53 ff ff ff c3 48 81 ff ff 0f 00 00 77 03 31 c0 c3 53 48
  ...
  Call Trace:
   <TASK>
   ? nilfs_palloc_freev.cold.24+0x58/0x58 [nilfs2]
   nilfs_destroy_cachep+0x16/0x3a [nilfs2]
   exit_nilfs_fs+0xa/0x1b [nilfs2]
    __x64_sys_delete_module+0x1d9/0x3a0
   ? __sanitizer_cov_trace_pc+0x1a/0x50
   ? syscall_trace_enter.isra.19+0x119/0x190
   do_syscall_64+0x34/0x80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
   ...
   </TASK>
  Kernel panic - not syncing: panic_on_warn set ...

This patch fixes these issues by calling nilfs_detach_log_writer() cleanup
function if spawning the log writer thread fails.

Link: https://lkml.kernel.org/r/20221007085226.57667-1-konishi.ryusuke@gmail.com
Fixes: e912a5b66837 ("nilfs2: use root object to get ifile")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7381dc4ad60658ca4c05@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix use-after-free bug of struct nilfs_root

commit d325dc6eb763c10f591c239550b8c7e5466a5d09 upstream.

If the beginning of the inode bitmap area is corrupted on disk, an inode
with the same inode number as the root inode can be allocated and fail
soon after.  In this case, the subsequent call to nilfs_clear_inode() on
that bogus root inode will wrongly decrement the reference counter of
struct nilfs_root, and this will erroneously free struct nilfs_root,
causing kernel oopses.

This fixes the problem by changing nilfs_new_inode() to skip reserved
inode numbers while repairing the inode bitmap.

Link: https://lkml.kernel.org/r/20221003150519.39789-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b8c672b0e22615c80fe0@syzkaller.appspotmail.com
Reported-by: Khalid Masum <khalid.masum.92@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()

commit 21a87d88c2253350e115029f14fe2a10a7e6c856 upstream.

If the i_mode field in inode of metadata files is corrupted on disk, it
can cause the initialization of bmap structure, which should have been
called from nilfs_read_inode_common(), not to be called.  This causes a
lockdep warning followed by a NULL pointer dereference at
nilfs_bmap_lookup_at_level().

This patch fixes these issues by adding a missing sanitiy check for the
i_mode field of metadata file's inode.

Link: https://lkml.kernel.org/r/20221002030804.29978-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2b32eb36c1a825b7a74c@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.73

Link: https://lore.kernel.org/r/20221010070331.211113813@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221010191226.167997210@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Allen Pais <apais@microsoft.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "clk: ti: Stop using legacy clkctrl names for omap4 and 5"

This reverts commit 67c830a6de835a36b4e19fe4d968dbaf8dc4e9c6.

Which was upstream commit 255584b138343d4a28c6d25bd82d04b09460d672.

Reported as causing boot failures.

Signed-off-by: Sasha Levin <sashal@kernel.org>

rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

commit 766279a8f85df32345dbda03b102ca1ee3d5ddea upstream.

The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()").  This fixes W=1 warning:

  In function ‘qcom_glink_rx_close’,
    inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
  drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   1549 |                 strncpy(chinfo.name, channel->name, sizeof(chinfo.name));

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Chernyakov <acherniakov@astralinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix 300 bps rate for SIO

commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream.

The 300 bps rate of SIO devices has been mapped to 9600 bps since
2003... Let's fix the regression.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mon: make mmapped memory read only

commit a659daf63d16aa883be42f3f34ff84235c302198 upstream.

Syzbot found an issue in usbmon module, where the user space client can
corrupt the monitor's internal memory, causing the usbmon module to
crash the kernel with segfault, UAF, etc.

The reproducer mmaps the /dev/usbmon memory to user space, and
overwrites it with arbitrary data, which causes all kinds of issues.

Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set.
Also clear VM_MAYWRITE to make it impossible to change it to writable
later.

Cc: "Dmitry Vyukov" <dvyukov@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon")
Suggested-by: PaX Team <pageexec@freemail.hu> # for the VM_MAYRITE portion
Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a
Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Disable irq when locking lag_lock

[ Upstream commit 8e93f29422ffe968d7161f91acdf0d47f5323727 ]

The lag_lock is taken from both process and softirq contexts which results
lockdep warning[0] about potential deadlock. However, just disabling
softirqs by using *_bh spinlock API is not enough since it will cause
warning in some contexts where the lock is obtained with hard irqs
disabled. To fix the issue save current irq state, disable them before
obtaining the lock an re-enable irqs from saved state after releasing it.

[0]:

[Sun Aug  7 13:12:29 2022] ================================
[Sun Aug  7 13:12:29 2022] WARNING: inconsistent lock state
[Sun Aug  7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted
[Sun Aug  7 13:12:29 2022] --------------------------------
[Sun Aug  7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[Sun Aug  7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[Sun Aug  7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at:
[Sun Aug  7 13:12:29 2022]   lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]   _raw_spin_lock+0x2c/0x40
[Sun Aug  7 13:12:29 2022]   mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_nic_enable+0x114/0x470 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_resume+0x105/0x160 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_probe+0xac3/0x14f0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   auxiliary_bus_probe+0x9d/0xe0
[Sun Aug  7 13:12:29 2022]   really_probe+0x1e0/0xaa0
[Sun Aug  7 13:12:29 2022]   __driver_probe_device+0x219/0x480
[Sun Aug  7 13:12:29 2022]   driver_probe_device+0x49/0x130
[Sun Aug  7 13:12:29 2022]   __driver_attach+0x1e4/0x4d0
[Sun Aug  7 13:12:29 2022]   bus_for_each_dev+0x11e/0x1a0
[Sun Aug  7 13:12:29 2022]   bus_add_driver+0x3f4/0x5a0
[Sun Aug  7 13:12:29 2022]   driver_register+0x20f/0x390
[Sun Aug  7 13:12:29 2022]   __auxiliary_driver_register+0x14e/0x260
[Sun Aug  7 13:12:29 2022]   mlx5e_init+0x38/0x90 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb]
[Sun Aug  7 13:12:29 2022]   do_one_initcall+0xc4/0x400
[Sun Aug  7 13:12:29 2022]   do_init_module+0x18a/0x620
[Sun Aug  7 13:12:29 2022]   load_module+0x563a/0x7040
[Sun Aug  7 13:12:29 2022]   __do_sys_finit_module+0x122/0x1d0
[Sun Aug  7 13:12:29 2022]   do_syscall_64+0x3d/0x90
[Sun Aug  7 13:12:29 2022]   entry_SYSCALL_64_after_hwframe+0x46/0xb0
[Sun Aug  7 13:12:29 2022] irq event stamp: 3596508
[Sun Aug  7 13:12:29 2022] hardirqs last  enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100
[Sun Aug  7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100
[Sun Aug  7 13:12:29 2022] softirqs last  enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022]
                           other info that might help us debug this:
[Sun Aug  7 13:12:29 2022]  Possible unsafe locking scenario:

[Sun Aug  7 13:12:29 2022]        CPU0
[Sun Aug  7 13:12:29 2022]        ----
[Sun Aug  7 13:12:29 2022]   lock(lag_lock);
[Sun Aug  7 13:12:29 2022]   <Interrupt>
[Sun Aug  7 13:12:29 2022]     lock(lag_lock);
[Sun Aug  7 13:12:29 2022]
                            *** DEADLOCK ***

[Sun Aug  7 13:12:29 2022] 4 locks held by swapper/0/0:
[Sun Aug  7 13:12:29 2022]  #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60
[Sun Aug  7 13:12:29 2022]  #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570
[Sun Aug  7 13:12:29 2022]  #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0
[Sun Aug  7 13:12:29 2022]
                           stack backtrace:
[Sun Aug  7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1
[Sun Aug  7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[Sun Aug  7 13:12:29 2022] Call Trace:
[Sun Aug  7 13:12:29 2022]  <IRQ>
[Sun Aug  7 13:12:29 2022]  dump_stack_lvl+0x57/0x7d
[Sun Aug  7 13:12:29 2022]  mark_lock.part.0.cold+0x5f/0x92
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? unwind_next_frame+0x1c4/0x1b50
[Sun Aug  7 13:12:29 2022]  ? secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug  7 13:12:29 2022]  ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? stack_access_ok+0x1d0/0x1d0
[Sun Aug  7 13:12:29 2022]  ? start_kernel+0x3a7/0x3c5
[Sun Aug  7 13:12:29 2022]  __lock_acquire+0x1260/0x6720
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? mark_lock.part.0+0xed/0x3060
[Sun Aug  7 13:12:29 2022]  ? stack_trace_save+0x91/0xc0
[Sun Aug  7 13:12:29 2022]  lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  _raw_spin_lock+0x2c/0x40
[Sun Aug  7 13:12:29 2022]  ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  atomic_notifier_call_chain+0xd7/0x1d0
[Sun Aug  7 13:12:29 2022]  br_switchdev_fdb_notify+0xea/0x100
[Sun Aug  7 13:12:29 2022]  ? br_switchdev_set_port_flag+0x310/0x310
[Sun Aug  7 13:12:29 2022]  fdb_notify+0x11b/0x150
[Sun Aug  7 13:12:29 2022]  br_fdb_update+0x34c/0x570
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? br_fdb_add_local+0x50/0x50
[Sun Aug  7 13:12:29 2022]  ? br_allowed_ingress+0x5f/0x1070
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  br_handle_frame_finish+0x786/0x18e0
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  ? sctp_inet_bind_verify+0x4d/0x190
[Sun Aug  7 13:12:29 2022]  ? xlog_unpack_data+0x2e0/0x310
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  br_nf_hook_thresh+0x227/0x380 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? setup_pre_routing+0x460/0x460 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter]
[Sun Aug  7 13:12:29 2022]  br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  br_handle_frame+0x8a9/0x1270
[Sun Aug  7 13:12:29 2022]  ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? bond_handle_frame+0xf9/0xac0 [bonding]
[Sun Aug  7 13:12:29 2022]  ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug  7 13:12:29 2022]  __netif_receive_skb_core+0x7c0/0x2c70
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  ? generic_xdp_tx+0x5b0/0x5b0
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  __netif_receive_skb_list_core+0x2d7/0x8a0
[Sun Aug  7 13:12:29 2022]  ? lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  ? process_backlog+0x960/0x960
[Sun Aug  7 13:12:29 2022]  ? lockdep_hardirqs_on_prepare+0x129/0x400
[Sun Aug  7 13:12:29 2022]  ? kvm_clock_get_cycles+0x14/0x20
[Sun Aug  7 13:12:29 2022]  netif_receive_skb_list_internal+0x5f4/0xd60
[Sun Aug  7 13:12:29 2022]  ? do_xdp_generic+0x150/0x150
[Sun Aug  7 13:12:29 2022]  ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  napi_complete_done+0x188/0x710
[Sun Aug  7 13:12:29 2022]  mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? __queue_work+0x53c/0xeb0
[Sun Aug  7 13:12:29 2022]  __napi_poll+0x9f/0x540
[Sun Aug  7 13:12:29 2022]  net_rx_action+0x420/0xb70
[Sun Aug  7 13:12:29 2022]  ? napi_threaded_poll+0x470/0x470
[Sun Aug  7 13:12:29 2022]  ? __common_interrupt+0x79/0x1a0
[Sun Aug  7 13:12:29 2022]  __do_softirq+0x271/0x92c
[Sun Aug  7 13:12:29 2022]  irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022]  common_interrupt+0x7d/0xa0
[Sun Aug  7 13:12:29 2022]  </IRQ>
[Sun Aug  7 13:12:29 2022]  <TASK>
[Sun Aug  7 13:12:29 2022]  asm_common_interrupt+0x22/0x40
[Sun Aug  7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60
[Sun Aug  7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00
[Sun Aug  7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242
[Sun Aug  7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc
[Sun Aug  7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac
[Sun Aug  7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3
[Sun Aug  7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000
[Sun Aug  7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000
[Sun Aug  7 13:12:29 2022]  ? default_idle_call+0xcc/0x460
[Sun Aug  7 13:12:29 2022]  default_idle_call+0xec/0x460
[Sun Aug  7 13:12:29 2022]  do_idle+0x394/0x450
[Sun Aug  7 13:12:29 2022]  ? arch_cpu_idle_exit+0x40/0x40
[Sun Aug  7 13:12:29 2022]  cpu_startup_entry+0x19/0x20
[Sun Aug  7 13:12:29 2022]  rest_init+0x156/0x250
[Sun Aug  7 13:12:29 2022]  arch_call_rest_init+0xf/0x15
[Sun Aug  7 13:12:29 2022]  start_kernel+0x3a7/0x3c5
[Sun Aug  7 13:12:29 2022]  secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug  7 13:12:29 2022]  </TASK>

Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: fix MCS divisor value

[ Upstream commit 64e966d1e84b29c9fa916cfeaabbf4013703942e ]

The Bitrate for HE/EHT MCS6 is calculated wrongly due to the
incorrect MCS divisor value for mcs6. Fix it with the proper
value.

previous mcs_divisor value = (11769/6144) = 1.915527

fixed mcs_divisor value = (11377/6144) = 1.851725

Fixes: 9c97c88d2f4b ("cfg80211: Add support to calculate and report 4096-QAM HE rates")
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()

[ Upstream commit 2b7aa91ba0e86b8643f5d3c83874c80599c731d7 ]

NULL pointer dereference is triggered when calling thp split via debugfs
on the system with offlined memory blocks.  With debug option enabled, the
following kernel messages are printed out:

  page:00000000467f4890 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x121c000
  flags: 0x17fffc00000000(node=0|zone=2|lastcpupid=0x1ffff)
  raw: 0017fffc00000000 0000000000000000 dead000000000122 0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
  page dumped because: unmovable page
  page:000000007d7ab72e is uninitialized and poisoned
  page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
  ------------[ cut here ]------------
  kernel BUG at include/linux/mm.h:1248!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 16 PID: 20964 Comm: bash Tainted: G          I        6.0.0-rc3-foll-numa+ #41
  ...
  RIP: 0010:split_huge_pages_write+0xcf4/0xe30

This shows that page_to_nid() in page_zone() is unexpectedly called for an
offlined memmap.

Use pfn_to_online_page() to get struct page in PFN walker.

Link: https://lkml.kernel.org/r/20220908041150.3430269-1-naoya.horiguchi@linux.dev
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")      [visible after d0dc12e86b319]
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/huge_memory: minor cleanup for split_huge_pages_all

[ Upstream commit a17206dac7b262e7abed5a05e34a6bd6bd0a9b06 ]

There is nothing to do if a zone doesn't have any pages managed by the
buddy allocator. So we should check managed_zone instead. Also if a thp
is found, there's no need to traverse the subpages again.

Link: https://lkml.kernel.org/r/20220704132201.14611-13-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 2b7aa91ba0e8 ("mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf parse-events: Identify broken modifiers

[ Upstream commit eabd4523395e4a8f2b049165642801f2ab8ff893 ]

Previously the broken modifier causes a usage message to printed but
nothing else.

After:

  $ perf stat -e 'cycles:kk' -a sleep 2
  event syntax error: 'cycles:kk'
                              \___ Bad modifier
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

      -e, --event <event>   event selector. use 'perf list' to list available events

  $ perf stat -e '{instructions,cycles}:kk' -a sleep 2
  event syntax error: '..ns,cycles}:kk'
                                    \___ Bad modifier
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

      -e, --event <event>   event selector. use 'perf list' to list available events

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Denys Zagorui <dzagorui@cisco.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: ShihCheng Tu <mrtoastcheng@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20211015172132.1162559-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 71c86cda750b ("perf parse-events: Remove "not supported" hybrid cache events")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Terminate infinite loop in SD-UHS voltage switch

[ Upstream commit e9233917a7e53980664efbc565888163c0a33c3f ]

This loop intends to retry a max of 10 times, with some implicit
termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the
termination condition depends on the value reported by the SD card
(*rocr), which may or may not correctly reflect what we asked it to do.

Needless to say, it's not wise to rely on the card doing what we expect;
we should at least terminate the loop regardless. So, check both the
input and output values, so we ensure we will terminate regardless of
the SD card behavior.

Note that SDIO learned a similar retry loop in commit 0797e5f1453b
("mmc: core: Fixup signal voltage switch"), but that used the 'ocr'
result, and so the current pre-terminating condition looks like:

    rocr & ocr & R4_18V_PRESENT

(i.e., it doesn't have the same bug.)

This addresses a number of crash reports seen on ChromeOS that look
like the following:

    ... // lots of repeated: ...
    <4>[13142.846061] mmc1: Skipping voltage switch
    <4>[13143.406087] mmc1: Skipping voltage switch
    <4>[13143.964724] mmc1: Skipping voltage switch
    <4>[13144.526089] mmc1: Skipping voltage switch
    <4>[13145.086088] mmc1: Skipping voltage switch
    <4>[13145.645941] mmc1: Skipping voltage switch
    <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds.
    ...

Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Replace with already defined values for readability

[ Upstream commit e427266460826bea21b70f9b2bb29decfb2c2620 ]

SD_ROCR_S18A is already defined and is used to check the rocr value, so
let's replace with already defined values for readability.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: e9233917a7e5 ("mmc: core: Terminate infinite loop in SD-UHS voltage switch")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: skip audio setup when audio stream is enabled

[ Upstream commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98 ]

[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.

[how]
skip audio setup for pipelines which audio stream has been enabled

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: update gamut remap if plane has changed

[ Upstream commit 52bb21499cf54fa65b56d97cd0d68579c90207dd ]

[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.

[How]
Update gamut remap if planes change.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Assume an LTTPR is always present on fixed_vs links

[ Upstream commit 29956d0fded036a570bd8e7d4ea4b1a1730307d2 ]

[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.

[HOW]
Override internal repeater count if fixed_vs flag is set for a given link

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix double cursor on non-video RGB MPO

[ Upstream commit b261509952bc19d1012cf732f853659be6ebc61e ]

[Why]

DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.

This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).

[How]

Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.

This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.

The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: fix potential memory leak in aq_ndev_close()

[ Upstream commit 65e5d27df61283e5390f04b09dc79cd832f95607 ]

If aq_nic_stop() fails, aq_ndev_close() returns err without calling
aq_nic_deinit() to release the relevant memory and resource, which
will lead to a memory leak.

We can fix it by deleting the if condition judgment and goto statement to
call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch: um: Mark the stack non-executable to fix a binutils warning

[ Upstream commit bd71558d585ac61cfd799db7f25e78dca404dd7a ]

Since binutils 2.39, ld will print a warning if any stack section is
executable, which is the default for stack sections on files without a
.note.GNU-stack section.

This was fixed for x86 in commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"),
but remained broken for UML, resulting in several warnings:

/usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions

Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings
about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments
to dodge the remaining warnings about LOAD segments with RWX permissions
in the kallsyms objects. (Note that this flag is apparently not
available on lld, so hide it behind a test for BFD, which is what the
x86 patch does.)

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Cleanup compiler warning in arch/x86/um/tls_32.c

[ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ]

arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.

Remove the checks to silence these warnings.

../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
   68 |         if (!t->arch.tls_array)
      |             ^
In file included from ../arch/x86/um/asm/processor.h:10,
                 from ../include/linux/rcupdate.h:30,
                 from ../include/linux/rculist.h:11,
                 from ../include/linux/pid.h:5,
                 from ../include/linux/sched.h:14,
                 from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
  243 |         if (!t->arch.tls_array)
      |             ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Cleanup syscall_handler_t cast in syscalls_32.h

[ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ]

Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi: Fix the converter reuse for the silent stream

[ Upstream commit 5f80d6bd2b01de4cafac3302f58456bf860322fc ]

When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.

If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.

Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: prestera: add support for for Aldrin2

[ Upstream commit 9124dbcc2dd6c51e81f97f63f7807118c4eb140a ]

Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.

Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
V2:
  - retarget to net tree instead of net-next;
  - fix missed colon in patch subject ('net marvell' vs 'net: mavell');
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ieee802154: fix uninit value bug in dgram_sendmsg

[ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ]

There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.

We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.

Also fixed in raw_bind, dgram_bind, dgram_connect.

Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Fix a UAF bug in __qedf_probe()

[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]

In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.

There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.

The KASAN logs are as follows:

[    2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[    2.312969]
[    2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    2.312969] Call Trace:
[    2.312969]  dump_stack_lvl+0x59/0x7b
[    2.312969]  print_address_description+0x7c/0x3b0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  __kasan_report+0x160/0x1c0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  kasan_report+0x4b/0x70
[    2.312969]  ? kobject_put+0x25d/0x290
[    2.312969]  kasan_check_range+0x2ca/0x310
[    2.312969]  __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  ? selinux_kernfs_init_security+0xdc/0x5f0
[    2.312969]  ? trace_rpm_return_int_rcuidle+0x18/0x120
[    2.312969]  ? rpm_resume+0xa5c/0x16e0
[    2.312969]  ? qedf_get_generic_tlv_data+0x160/0x160
[    2.312969]  local_pci_probe+0x13c/0x1f0
[    2.312969]  pci_device_probe+0x37e/0x6c0

Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an
error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

[ Upstream commit 91df7751eb890e970afc08f50b8f0fa5ea39e03d ]

Add missing cleanup in devm_platform_ioremap_resource().
When probe fails remove dma channel resources and disable clocks in
accordance with the order of resources allocated .

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Add SCMI PM driver remove routine

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]

Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.

As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:

 | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
 | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!

Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.

Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Harden accesses to the sensor domains

[ Upstream commit 76f89c954788763db575fb512a40bd483864f1e9 ]

Accessing sensor domains descriptors by the index upon the SCMI drivers
requests through the SCMI sensor operations interface can potentially
lead to out-of-bound violations if the SCMI driver misbehave.

Add an internal consistency check before any such domains descriptors
accesses.

Link: https://lore.kernel.org/r/20220817172731.1185305-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Improve checks in the info_get operations

[ Upstream commit 1ecb7d27b1af6705e9a4e94415b4d8cc8cf2fbfb ]

SCMI protocols abstract and expose a number of protocol specific
resources like clocks, sensors and so on. Information about such
specific domain resources are generally exposed via an `info_get`
protocol operation.

Improve the sanity check on these operations where needed.

Link: https://lore.kernel.org/r/20220817172731.1185305-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: fix UAF/GPF bug in nilfs_mdt_destroy

commit 2e488f13755ffbb60f307e991b27024716a33b29 upstream.

In alloc_inode, inode_init_always() could return -ENOMEM if
security_inode_alloc() fails, which causes inode->i_private
uninitialized. Then nilfs_is_metadata_file_inode() returns
true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(),
which frees the uninitialized inode->i_private
and leads to crashes(e.g., UAF/GPF).

Fix this by moving security_inode_alloc just prior to
this_cpu_inc(nr_inodes)

Link: https://lkml.kernel.org/r/CAFcO6XOcf1Jj2SeGt=jJV59wmhESeSKpfR0omdFRq+J9nD1vfQ@mail.gmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush

commit bedf03416913d88c796288f9dca109a53608c745 upstream.

The IPI broadcast is used to serialize against fast-GUP, but fast-GUP will
move to use RCU instead of disabling local interrupts in fast-GUP.  Using
an IPI is the old-styled way of serializing against fast-GUP although it
still works as expected now.

And fast-GUP now fixed the potential race with THP collapse by checking
whether PMD is changed or not.  So IPI broadcast in radix pmd collapse
flush is not necessary anymore.  But it is still needed for hash TLB.

Link: https://lkml.kernel.org/r/20220907180144.555485-2-shy828301@gmail.com
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: gup: fix the fast GUP race against THP collapse

commit 70cbc3cc78a997d8247b50389d37c4e1736019da upstream.

Since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm:
introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer
sufficient to handle concurrent GUP-fast in all cases, it only handles
traditional IPI-based GUP-fast correctly.  On architectures that send an
IPI broadcast on TLB flush, it works as expected.  But on the
architectures that do not use IPI to broadcast TLB flush, it may have the
below race:

   CPU A                                          CPU B
THP collapse                                     fast GUP
                                              gup_pmd_range() <-- see valid pmd
                                                  gup_pte_range() <-- work on pte
pmdp_collapse_flush() <-- clear pmd and flush
__collapse_huge_page_isolate()
    check page pinned <-- before GUP bump refcount
                                                      pin the page
                                                      check PTE <-- no change
__collapse_huge_page_copy()
    copy data to huge page
    ptep_clear()
install huge pmd for the huge page
                                                      return the stale page
discard the stale page

The race can be fixed by checking whether PMD is changed or not after
taking the page pin in fast GUP, just like what it does for PTE.  If the
PMD is changed it means there may be parallel THP collapse, so GUP should
back off.

Also update the stale comment about serializing against fast GUP in
khugepaged.

Link: https://lkml.kernel.org/r/20220907180144.555485-1-shy828301@gmail.com
Fixes: 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()")
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Inherit need_wakeup flag for shared sockets

commit 60240bc26114543fcbfcd8a28466e67e77b20388 upstream.

The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM`
flag and of different queue ids and/or devices. They should inherit
the flag from the first socket buffer pool since no flags can be
specified once `XDP_SHARED_UMEM` is specified.

Fixes: b5aea28dca134 ("xsk: Add shared umem support between queue ids")
Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: update mediator information in CoC docs

commit 8bfdfa0d6b929ede7b6189e0e546ceb6a124d05d upstream.

Update mediator information in the CoC interpretation document.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220901212319.56644-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>