Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into clk-next

 - Support IDT VersaClock 5P49V5925
 - Bunch of updates for HSDK clock generation unit (CGU) driver
 - New clk driver for Baikal-T1 SoCs

* clk-vc5:
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965

* clk-hsdk:
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first

* clk-mediatek:
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC

* clk-baikal:
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding

Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and 'clk-silabs' into clk-next

 - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
 - Add support for X1830 and X1000 Ingenic SoC clk controllers
 - Add support for Qualcomm's MSM8939 Generic Clock Controller
 - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
 - Enable supply regulators for GPU gdscs on Qualcomm SoCs
 - Add support for Si5342, Si5344 and Si5345 chips

* clk-mmp:
  clk: mmp2: Add audio clock controller driver
  dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding
  clk: mmp2: Add support for power islands
  dt-bindings: marvell,mmp2: Add ids for the power domains
  dt-bindings: clock: Make marvell,mmp2-clock a power controller
  clk: mmp2: Add the audio clock
  clk: mmp2: Add the I2S clocks
  clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init()
  clk: mmp2: Move thermal register defines up a bit
  dt-bindings: marvell,mmp2: Add clock id for the Audio clock
  dt-bindings: marvell,mmp2: Add clock id for the I2S clocks
  clk: mmp: frac: Allow setting bits other than the numerator/denominator
  clk: mmp: frac: Do not lose last 4 digits of precision

* clk-intel:
  clk: intel: remove redundant initialization of variable rate64
  clk: intel: Add CGU clock driver for a new SoC
  dt-bindings: clk: intel: Add bindings document & header file for CGU

* clk-ingenic:
  clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused
  clk: X1000: Add FIXDIV for SSI clock of X1000.
  dt-bindings: clock: Add and reorder ABI for X1000.
  clk: Ingenic: Add CGU driver for X1830.
  dt-bindings: clock: Add X1830 clock bindings.
  clk: Ingenic: Adjust cgu code to make it compatible with X1830.
  clk: Ingenic: Remove unnecessary spinlock when reading registers.

* clk-qcom:
  clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src
  dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
  clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller
  clk: qcom: gcc: Add support for Secure control source clock
  dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID
  clk: qcom: gcc: Add support for a new frequency for SC7180
  clk: qcom: Add DT bindings for MSM8939 GCC
  clk: qcom: gcc: Add missing UFS clocks for SM8150
  clk: qcom: gcc: Add GPU and NPU clocks for SM8150
  clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc
  clk: qcom: gdsc: Handle GDSC regulator supplies
  clk: qcom: msm8916: Fix the address location of pll->config_reg

* clk-silabs:
  clk: clk-si5341: Add support for the Si5345 series

Merge branches 'clk-unisoc', 'clk-trivial', 'clk-bcm', 'clk-st' and 'clk-ast2600' into clk-next

* clk-unisoc:
  clk: sprd: add mipi_csi_xx gate clocks
  clk: sprd: add dt-bindings include for mipi_csi_xx clocks
  dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A
  clk: sprd: check its parent status before reading gate clock
  clk: sprd: return correct type of value for _sprd_pll_recalc_rate
  clk: sprd: mark the local clock symbols static

* clk-trivial:
  clk: versatile: remove redundant assignment to pointer clk
  clk: clk-xgene: Fix a typo in Kconfig
  clk: Remove unused inline function clk_debug_reparent

* clk-bcm:
  clk: bcm2835: Constify struct debugfs_reg32
  clk: bcm2835: Remove casting to bcm2835_clk_register
  clk: bcm2835: Fix return type of bcm2835_register_gate

* clk-st:
  clk: clk-flexgen: fix clock-critical handling

* clk-ast2600:
  clk: ast2600: Fix AHB clock divider for A1

Merge branches 'clk-tegra', 'clk-imx', 'clk-zynq', 'clk-socfpga', 'clk-at91' and 'clk-ti' into clk-next

 - Support custom flags in Xilinx zynq firmware
 - Various small fixes to the Xilinx clk driver
 - Support for Intel Agilex clks

* clk-tegra:
  clk: tegra: Add Tegra210 CSI TPG clock gate
  clk: tegra30: Use custom CCLK implementation
  clk: tegra20: Use custom CCLK implementation
  clk: tegra: cclk: Add helpers for handling PLLX rate changes
  clk: tegra: pll: Add pre/post rate-change hooks
  clk: tegra: Add custom CCLK implementation
  clk: tegra: Remove the old emc_mux clock for Tegra210
  clk: tegra: Implement Tegra210 EMC clock
  clk: tegra: Export functions for EMC clock scaling
  clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210
  clk: tegra: Rename Tegra124 EMC clock source file
  dt-bindings: clock: tegra: Add clock ID for CSI TPG clock

* clk-imx:
  clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice
  clk: imx: add imx8m_clk_hw_composite_bus
  clk: imx: add mux ops for i.MX8M composite clk
  clk: imx8m: migrate A53 clk root to use composite core
  clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code
  clk: imx8mp: Define gates for pll1/2 fixed dividers
  clk: imx: imx8mp: fix pll mux bit
  clk: imx8m: drop clk_hw_set_parent for A53
  dt-bindings: clocks: imx8mp: Add ids for audiomix clocks
  clk: imx: Add helpers for passing the device as argument
  clk: imx: pll14xx: Add the device as argument when registering
  clk: imx: gate2: Allow single bit gating clock
  clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait
  clk: imx: clk-sscg-pll: Remove unnecessary blank lines
  clk: imx: drop the dependency on ARM64 for i.MX8M
  clk: imx7ulp: make it easy to change ARM core clk
  clk: imx: imx6ul: change flexcan clock to support CiA bitrates

* clk-zynq:
  clk: zynqmp: Make zynqmp_clk_get_max_divisor static
  clk: zynqmp: Update fraction clock check from custom type flags
  clk: zynqmp: Add support for custom type flags
  clk: zynqmp: fix memory leak in zynqmp_register_clocks
  clk: zynqmp: Fix invalid clock name queries
  clk: zynqmp: Fix divider2 calculation
  clk: zynqmp: Limit bestdiv with maxdiv

* clk-socfpga:
  clk: socfpga: agilex: add clock driver for the Agilex platform
  dt-bindings: documentation: add clock bindings information for Agilex
  clk: socfpga: add const to _ops data structures
  clk: socfpga: remove clk_ops enable/disable methods
  clk: socfpga: stratix10: use new parent data scheme

* clk-at91:
  clk: at91: allow setting all PMC clock parents via DT
  clk: at91: allow setting PCKx parent via DT
  clk: at91: optimize pmc data allocation
  clk: at91: pmc: decrement node's refcount
  clk: at91: pmc: do not continue if compatible not located
  clk: at91: Add peripheral clock for PTC

* clk-ti:
  clk: ti: dra7: remove two unused symbols
  clk: ti: dra7xx: fix RNG clock parent
  clk: ti: dra7xx: mark MCAN clock as DRA76x only
  clk: ti: dra7xx: fix gpu clkctrl parent
  clk: ti: omap5: Add proper parent clocks for l4-secure clocks
  clk: ti: omap4: Add proper parent clocks for l4-secure clocks
  clk: ti: composite: fix memory leak

Merge branches 'clk-selectable', 'clk-amlogic', 'clk-renesas', 'clk-samsung' and 'clk-allwinner' into clk-next

 - Allow the COMMON_CLK config to be selectable

* clk-selectable:
  clk: Move HAVE_CLK config out of architecture layer
  MIPS: Loongson64: Drop asm/clock.h include
  ARM: mmp: Remove legacy clk code
  clk: Allow the common clk framework to be selectable
  mmc: meson-mx-sdio: Depend on OF_ADDRESS and not just OF
  MIPS: Remove redundant CLKDEV_LOOKUP selects
  h8300: Remove redundant CLKDEV_LOOKUP selects
  arm64: tegra: Remove redundant CLKDEV_LOOKUP selects
  ARM: Remove redundant CLKDEV_LOOKUP selects
  ARM: Remove redundant COMMON_CLK selects

* clk-amlogic:
  clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
  clk: meson: meson8b: Make the CCF use the glitch-free VPU mux
  clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
  clk: meson: meson8b: Fix the polarity of the RESET_N lines
  clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
  clk: meson: g12a: Prepare the GPU clock tree to change at runtime
  clk: meson: gxbb: Prepare the GPU clock tree to change at runtime
  clk: meson: meson8b: make the hdmi_sys clock tree mutable
  clk: meson8b: export the HDMI system clock

* clk-renesas:
  dt-bindings: clock: renesas: mstp: Convert to json-schema
  dt-bindings: clock: renesas: div6: Convert to json-schema
  clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling
  clk: renesas: rcar-gen2: Remove superfluous CLK_RENESAS_DIV6 selects
  clk: renesas: cpg-mssr: Add R8A7742 support
  dt-bindings: clock: renesas: cpg-mssr: Document r8a7742 binding
  clk: renesas: Add r8a7742 CPG Core Clock Definitions
  dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
  MAINTAINERS: Add DT Bindings for Renesas Clock Generators
  clk: renesas: r9a06g032: Fix some typo in comments
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add r8a77961 support

* clk-samsung:
  clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
  ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;
  clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x
  clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical

* clk-allwinner:
  clk: sunxi: Fix incorrect usage of round_down()

dt: Add bindings for IDT VersaClock 5P49V5925

IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lkml.kernel.org/r/20200404161537.2312297-2-aford173@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: vc5: Add support for IDT VersaClock 5P49V6965

Update IDT VersaClock 5 driver to support 5P49V6965.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20200404161537.2312297-1-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Add Baikal-T1 CCU Dividers driver

Nearly each Baikal-T1 IP-core is supposed to have a clock source
of particular frequency. But since there are greater than five
IP-blocks embedded into the SoC, the CCU PLLs can't fulfill all the
needs. Baikal-T1 CCU provides a set of fixed and configurable clock
dividers in order to generate a necessary signal for each chip
sub-block.

This driver creates the of-based hardware clocks for each divider
available in Baikal-T1 CCU. The same way as for PLLs we split the
functionality up into the clocks operations (gate, ungate, set rate,
etc) and hardware clocks declaration/registration procedures.

In accordance with the CCU documentation all its dividers are distributed
into two CCU sub-blocks: AXI-bus and system devices reference clocks.
The former sub-block is used to supply the clocks for AXI-bus interfaces
(AXI clock domains) and the later one provides the SoC IP-cores reference
clocks. Each sub-block is represented by a dedicated DT node, so they
have different compatible strings to distinguish one from another.

For some reason CCU provides the dividers of different types. Some
dividers can be gateable some can't, some are fixed while the others
are variable, some have special divider' limitations, some've got a
non-standard register layout and so on. In order to cover all of these
cases the hardware clocks driver is designed with an info-descriptor
pattern. So there are special static descriptors declared for the
dividers of each type with additional flags describing the block
peculiarity. These descriptors are then used to create hardware clocks
with proper operations.

Some CCU dividers provide a way to reset a domain they generate
a clock for. So the CCU AXI-bus and CCU system devices clock
drivers also perform the reset controller registration.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-5-Sergey.Semin@baikalelectronics.ru
[sboyd@kernel.org: Drop return from void function, silence sparse
warnings about initializing structs with NULL vs. integer]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Add Baikal-T1 CCU PLLs driver

Baikal-T1 is supposed to be supplied with a high-frequency external
oscillator. But in order to create signals suitable for each IP-block
embedded into the SoC the oscillator output is primarily connected to
a set of CCU PLLs. There are five of them to create clocks for the MIPS
P5600 cores, an embedded DDR controller, SATA, Ethernet and PCIe domains.
The last three domains though named by the biggest system interfaces in
fact include nearly all of the rest SoC peripherals. Each of the PLLs is
based on True Circuits TSMC CLN28HPM IP-core with an interface wrapper
(so called safe PLL' clocks switcher) to simplify the PLL configuration
procedure.

This driver creates the of-based hardware clocks to use them then in
the corresponding subsystems. In order to simplify the driver code we
split the functionality up into the PLLs clocks operations and hardware
clocks declaration/registration procedures.

Even though the PLLs are based on the same IP-core, they may have some
differences. In particular, some CCU PLLs support the output clock change
without gating them (like CPU or PCIe PLLs), while the others don't, some
CCU PLLs are critical and aren't supposed to be gated. In order to cover
all of these cases the hardware clocks driver is designed with an
info-descriptor pattern. So there are special static descriptors declared
for each PLL, which is then used to create a hardware clock with proper
operations. Additionally debugfs-files are provided for each PLL' field
to make sure the implemented rate-PLLs-dividers calculation algorithm is
correct.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-4-Sergey.Semin@baikalelectronics.ru
[sboyd@kernel.org: Silence sparse warning about initializing structs
with NULL vs. integer]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: Add Baikal-T1 CCU Dividers binding

After being gained by the CCU PLLs the signals must be transformed to
be suitable for the clock-consumers. This is done by a set of dividers
embedded into the CCU. A first block of dividers is used to create
reference clocks for AXI-bus of high-speed peripheral IP-cores of the
chip. The second block dividers alter the PLLs output signals to be then
consumed by SoC peripheral devices. Both block DT nodes are ordinary
clock-providers with standard set of properties supported. But in addition
to that each clock provider can be used to reset the corresponding clock
domain. This makes the AXI-bus and System Devices CCU DT nodes to be also
reset-providers.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: Add Baikal-T1 CCU PLLs binding

Baikal-T1 Clocks Control Unit is responsible for transformation of a
signal coming from an external oscillator into clocks of various
frequencies to propagate them then to the corresponding clocks
consumers (either individual IP-blocks or clock domains). In order
to create a set of high-frequency clocks the external signal is
firstly handled by the embedded into CCU PLLs. So the corresponding
dts-node is just a normal clock-provider node with standard set of
properties. Note as being part of the Baikal-T1 System Controller its
DT node is supposed to be a child the system controller node.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-2-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: assign the initial value to clk_init_data of mtk_mux

When some new clock supports are introduced, e.g. [1]
it might lead to an error although it should be NULL because
clk_init_data is on the stack and it might have random values
if using without initialization.
Add the missing initial value to clk_init_data.

[1] https://android-review.googlesource.com/c/kernel/common/+/1278046

Fixes: a3ae549917f1 ("clk: mediatek: Add new clkmux register API")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1590560749-29136-1-git-send-email-weiyi.lu@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT6765 clock support

Add MT6765 clock support, include topckgen, apmixedsys,
infracfg, mcucfg and subsystem clocks.

Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1582278742-1626-6-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: add mt6765 clock IDs

Add MT6765 clock dt-bindings, include topckgen, apmixedsys,
infracfg, mcucfg and subsystem clocks.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1582278742-1626-5-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC

This patch adds the binding documentation for vcodecsys.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1582278742-1626-4-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC

This patch adds the binding documentation for mipi0a.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1582278742-1626-3-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC

This patch adds the binding documentation for apmixedsys, audsys, camsys,
imgsys, infracfg, mmsys, pericfg, topckgen

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1582278742-1626-2-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

CLK: HSDK: CGU: add support for 148.5MHz clock

Add support for 148.5MHz clock for HDMI PLL

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lkml.kernel.org/r/20200311134115.13257-4-Eugeniy.Paltsev@synopsys.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

CLK: HSDK: CGU: support PLL bypassing

Support setting PLL to bypass mode to support output frequency
equal to input one.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lkml.kernel.org/r/20200311134115.13257-3-Eugeniy.Paltsev@synopsys.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

CLK: HSDK: CGU: check if PLL is bypassed first

If PLL is bypassed the EN (enable) bit has no effect on
output clock.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lkml.kernel.org/r/20200311134115.13257-2-Eugeniy.Paltsev@synopsys.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: clk-si5341: Add support for the Si5345 series

Add support for the Si5342, Si5344 and Si5345 chips. These are equivalent
to the Si5341 family, but with more clock input options (which are not
supported yet by this driver).

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lkml.kernel.org/r/20200507061544.11388-1-mike.looijmans@topic.nl
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src

ufs_unipro_core_clk_src is required to allow UFS to clock scale for power
savings.

Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20200528142205.44003-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused

This device id table is passed to of_match_node() later on in probe, but
on CONFIG_OF=n builds of_match_node() doesn't do anything with the
arguments. Lets just mark the table unused so that the compiler doesn't
complain about this.

drivers/clk/ingenic/tcu.c:326:34: warning: unused variable 'ingenic_tcu_of_match' [-Wunused-const-variable]
static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
^
1 warning generated.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200528233837.70269-1-sboyd@kernel.org

clk: X1000: Add FIXDIV for SSI clock of X1000.

1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not
  directly derived from the output of SSIPLL, but from the clock
  obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2"
  is added for this purpose, and ensure that it initialized before
  "X1000_CLK_SSIMUX" when initializing the clocks.
2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU, and gates of CPU, PCLK
  are also added.
3.Use "CLK_OF_DECLARE_DRIVER" like the other CGU drivers.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200528031549.13846-8-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add and reorder ABI for X1000.

1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not
  directly derived from the output of SSIPLL, but from the clock
  obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2"
  is added for this purpose, it must between "X1000_CLK_SSIPLL"
  and "X1000_CLK_SSIMUX", otherwise an error will occurs when
  initializing the clock. These ABIs are only used for X1000, and
  I'm sure that no other devicetree out there is using these ABIs,
  so we should be able to reorder them.
2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU are also added.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200528031549.13846-7-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Ingenic: Add CGU driver for X1830.

Add support for the clocks provided by the CGU in the Ingenic X1830
SoC, making use of the cgu code to do the heavy lifting.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200528031549.13846-6-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add X1830 clock bindings.

Add the clock bindings for the X1830 Soc from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200528031549.13846-5-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Ingenic: Adjust cgu code to make it compatible with X1830.

The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, a new
"bypass_reg" was introduced. In addition, when calculating
rate, the PLL of X1830 introduced an extra 2x multiplier,
so a new "rate_multiplier" was introduced. And adjust the
code in jz47xx-cgu.c and x1000-cgu.c, make it to be
compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200528031549.13846-3-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Ingenic: Remove unnecessary spinlock when reading registers.

It is not necessary to use spinlock when reading registers,
so remove it from cgu.c.

Suggested-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200528031549.13846-2-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: intel: remove redundant initialization of variable rate64

The variable rate64 is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lkml.kernel.org/r/20200528221219.535804-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Add audio clock controller driver

This is a driver for a block that generates master and bit clocks for
the I2S interface. It's separate from the PMUs that generate clocks for
the peripherals.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-14-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding

This describes the bindings for a controller that generates master and bit
clocks for the I2S interface.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-13-lkundrak@v3.sk
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Add support for power islands

Apart from the clocks and resets, the PMU hardware also controls power
to peripherals that are on separate power islands. On MMP2, that's the
GC860 GPU and the SSPA audio interface, while on MMP3 also the camera
interface is on a separate island, along with the pair of GC2000 and GC300
GPUs and the SSPA.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-12-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: marvell,mmp2: Add ids for the power domains

On MMP2 the audio and GPU blocks are on separate power islands. On MMP3
the camera block's power is also controlled separately.

Add the numbers that we could use to refer to the power domains for
respective power islands from the device tree.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200519224151.2074597-11-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Make marvell,mmp2-clock a power controller

This is a binding for the MMP2 power management units. As such apart from
providing the clocks, they also manage the power islands.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-10-lkundrak@v3.sk
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Add the audio clock

This clocks the Audio block.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-9-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Add the I2S clocks

A pair of fractional clock sources for PLLs and gates.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-8-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init()

This is a trivial rename for a routine that registers more clock sources
than the PLLs -- there's also a XO.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-7-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Move thermal register defines up a bit

A trivial change to keep the sorting sane. The APBC registers are happier
when they are grouped together, instead of mixed with the APMU ones.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-6-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: marvell,mmp2: Add clock id for the Audio clock

This clocks the Audio block.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200519224151.2074597-5-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: marvell,mmp2: Add clock id for the I2S clocks

There are two of these on a MMP2.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200519224151.2074597-4-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp: frac: Allow setting bits other than the numerator/denominator

For the I2S fractional clocks, there are more bits that need to be set
for the clock to run. Their actual meaning is unknown.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-3-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp: frac: Do not lose last 4 digits of precision

While calculating the output rate of a fractional divider clock, the
value is divided and multipled by 10000, discarding the least
significant digits -- presumably to fit the intermediate value within 32
bits.

The precision we're losing is, however, not insignificant for things like
I2S clock. Maybe also elsewhere, now that since commit ea56ad60260e ("clk:
mmp2: Stop pretending PLL outputs are constant") the parent rates are more
precise and no longer rounded to 10000s.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-2-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ast2600: Fix AHB clock divider for A1

The latest specs for the AST2600 A1 chip include some different bit
definitions for calculating the AHB clock divider. Implement these in
order to get the correct AHB clock value in Linux.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200408203616.4031-1-eajames@linux.ibm.com
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: clk-flexgen: fix clock-critical handling

Fixes an issue leading to having all clocks following a critical
clocks marked as well as criticals.

Fixes: fa6415affe20 ("clk: st: clk-flexgen: Detect critical clocks")
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lkml.kernel.org/r/20200322140740.3970-1-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: Constify struct debugfs_reg32

bcm2835_debugfs_clock_reg32 is never changed and can therefore be made
const.

This allows the compiler to put it in the text section instead of the
data section.

Before:
   text    data     bss     dec     hex filename
  26598   16088      64   42750    a6fe drivers/clk/bcm/clk-bcm2835.o

After:
   text    data     bss     dec     hex filename
  26662   16024      64   42750    a6fe drivers/clk/bcm/clk-bcm2835.o

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lkml.kernel.org/r/20200508220238.4883-1-rikard.falkeborn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sprd: add mipi_csi_xx gate clocks

mipi_csi_xx clocks are used by camera sensors.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200527053638.31439-5-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sprd: add dt-bindings include for mipi_csi_xx clocks

mipi_csi_xx clocks are used by camera sensors.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200527053638.31439-4-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A

mipi_csi_xx clocks are used by camera sensors.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200527053638.31439-3-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sprd: check its parent status before reading gate clock

Some clocks only can be accessed if their parent is enabled. mipi_csi_xx
clocks on SC9863A are an examples. We have to ensure the parent clock is
enabled when reading those clocks.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200527053638.31439-2-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: versatile: remove redundant assignment to pointer clk

The pointer clk is being initialized with a value that is never read
and is being updated with a new value later on. The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lkml.kernel.org/r/20200526224116.63549-1-colin.king@canonical.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ti: dra7: remove two unused symbols

Fix the following gcc warning:

drivers/clk/ti/clk-7xx.c:320:43: warning: ‘dra7_gpu_sys_clk_data’
defined but not used [-Wunused-const-variable=]
 static const struct omap_clkctrl_div_data dra7_gpu_sys_clk_data
__initconst = {
                                           ^~~~~~~~~~~~~~~~~~~~~
drivers/clk/ti/clk-7xx.c:315:27: warning: ‘dra7_gpu_sys_clk_parents’
defined but not used [-Wunused-const-variable=]
 static const char * const dra7_gpu_sys_clk_parents[] __initconst = {
                           ^~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lkml.kernel.org/r/20200417073523.42520-1-yanaijie@huawei.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: allow setting all PMC clock parents via DT

We need to have clocks accessible via phandle to select them
as peripheral clock parent using assigned-clock-parents in DT.
Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: allow setting PCKx parent via DT

This exposes PROGx clocks for use in assigned-clocks DeviceTree property
for selecting PCKx parent clock.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: optimize pmc data allocation

Alloc whole data structure in one block. This makes the code shorter,
more efficient and easier to extend in following patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: pmc: decrement node's refcount

of_find_matching_node() increment node's refcount. Call
of_node_put() to decrement it after it was used.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1588508289-10140-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: pmc: do not continue if compatible not located

pmc_register_ops() is called for all AT91 devices. Return
-ENODEV in case of_find_matching_node() returns NULL.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1588508289-10140-1-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: Add peripheral clock for PTC

PMC generates the peripheral clock for the PTC.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lkml.kernel.org/r/20200515142720.290206-1-codrin.ciubotariu@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sprd: return correct type of value for _sprd_pll_recalc_rate

The function _sprd_pll_recalc_rate() defines return value to unsigned
long, but it would return a negative value when malloc fail, changing
to return its parent_rate makes more sense, since if the callback
.recalc_rate() is not set, the framework returns the parent_rate as
well.

Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200519030036.1785-2-zhang.lyra@gmail.com
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sprd: mark the local clock symbols static

There's a few pll gate clocks which were not marked with static, and
those clock are used only in the current file, so add static key word
for them.

Fixes: 0e4b8a2349f3 ("clk: sprd: add clocks support for SC9863A")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200519030036.1785-1-zhang.lyra@gmail.com
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: intel: Add CGU clock driver for a new SoC

Clock Generation Unit(CGU) is a new clock controller IP of a forthcoming
Intel network processor SoC named Lightning Mountain(LGM). It provides
programming interfaces to control & configure all CPU & peripheral clocks.
Add common clock framework based clock controller driver for CGU.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lkml.kernel.org/r/42a4f71847714df482bacffdcd84341a4052800b.1587102634.git.rahul.tanwar@linux.intel.com
[sboyd@kernel.org: Kill init function to alloc and cleanup newline]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add YAML schemas for QCOM A53 PLL

This patch adds schema for primary CPU PLL found on few Qualcomm
platforms.

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lkml.kernel.org/r/1588573803-3823-1-git-send-email-sivaprak@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller

This patch adds support for the MSM8939 GCC. The MSM8939 is based on the
MSM8916. MSM8939 is compatible in several ways with MSM8916 but, has
additional functional blocks added which require additional PLL sources. In
some cases functional blocks from the MSM8916 have different clock sources
or different supported frequencies.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lkml.kernel.org/r/20200517131348.688405-3-bryan.odonoghue@linaro.org
Tested-by: Konrad Dybcio <konradybcio@gmail.com>
[sboyd@kernel.org: Drop ret in probe function to remove unused
variable]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc: Add support for Secure control source clock

The secure controller driver requires to request for various frequencies
on the source clock, thus add support for the same.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1589709861-27580-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID

The gcc_sec_ctrl_clk_src clock is required to be controlled by the
secure controller driver.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1589709861-27580-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc: Add support for a new frequency for SC7180

There is a requirement to support 51.2MHz from GPLL6 for qup clocks,
thus update the frequency table and parent data/map to use the GPLL6
source PLL.

Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1589709861-27580-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: add clock driver for the Agilex platform

For the most part the Agilex clock structure is very similar to
Stratix10, so we re-use most of the Stratix10 clock driver.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-5-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: documentation: add clock bindings information for Agilex

Document the Agilex clock bindings, and add the clock header file. The
clock header is an enumeration of all the different clocks on the Agilex
platform.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-4-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: add const to _ops data structures

All the static clk_ops data structure need a const.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: remove clk_ops enable/disable methods

The enable/disable clock ops are already defined in the standard clock
ops, so we don't need to assign them.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: stratix10: use new parent data scheme

Convert, where possible, the stratix10 clock driver to the new parent
data scheme by specifying the parent data for clocks that have multiple
parents.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: intel: Add bindings document & header file for CGU

Clock generation unit(CGU) is a clock controller IP of Intel's Lightning
Mountain(LGM) SoC. Add DT bindings include file and document for CGU clock
controller driver of LGM.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lkml.kernel.org/r/8dce2be13195aab20c6b11fca6af0fffe22d5241.1587102634.git.rahul.tanwar@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: Make zynqmp_clk_get_max_divisor static

Fix sparse warning:

drivers/clk/zynqmp/divider.c:259:5: warning:
 symbol 'zynqmp_clk_get_max_divisor' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.kernel.org/r/20200403083040.37748-1-yuehaibing@huawei.com
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: Update fraction clock check from custom type flags

Older firmware version sets BIT(13) in clkflag to mark a
divider as fractional divider. Updated firmware version sets BIT(4)
in type flags to mark a divider as fractional divider since
BIT(13) is defined as CLK_DUTY_CYCLE_PARENT in the common clk
framework flags.

To support both old and new firmware version, consider BIT(13) from
clkflag and BIT(4) from type_flag to check if divider is fractional
or not.

To maintain compatibility BIT(13) of clkflag in firmware will not be
used in future for any purpose and will be marked as unused.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1584048699-24186-3-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: Add support for custom type flags

Store extra custom type flags received from firmware.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1584048699-24186-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: fix memory leak in zynqmp_register_clocks

This is detected by kmemleak running on zcu102 board:

unreferenced object 0xffffffc877e48180 (size 128):
comm "swapper/0", pid 1, jiffies 4294892909 (age 315.436s)
hex dump (first 32 bytes):
64 70 5f 76 69 64 65 6f 5f 72 65 66 5f 64 69 76 dp_video_ref_div
31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1...............
backtrace:
[<00000000c9be883b>] __kmalloc_track_caller+0x200/0x380
[<00000000f02c3809>] kvasprintf+0x7c/0x100
[<00000000e51dde4d>] kasprintf+0x60/0x80
[<0000000092298b05>] zynqmp_register_clocks+0x29c/0x398
[<00000000faaff182>] zynqmp_clock_probe+0x3cc/0x4c0
[<000000005f5986f0>] platform_drv_probe+0x58/0xa8
[<00000000d5810136>] really_probe+0xd8/0x2a8
[<00000000f5b671be>] driver_probe_device+0x5c/0x100
[<0000000038f91fcf>] __device_attach_driver+0x98/0xb8
[<000000008a3f2ac2>] bus_for_each_drv+0x74/0xd8
[<000000001cb2783d>] __device_attach+0xe0/0x140
[<00000000c268031b>] device_initial_probe+0x24/0x30
[<000000006998de4b>] bus_probe_device+0x9c/0xa8
[<00000000647ae6ff>] device_add+0x3c0/0x610
[<0000000071c14bb8>] of_device_add+0x40/0x50
[<000000004bb5d132>] of_platform_device_create_pdata+0xbc/0x138

This is because that when num_nodes is larger than 1, clk_out is
allocated using kasprintf for these nodes but only the last node's
clk_out is freed.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-5-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: Fix invalid clock name queries

The clock driver makes EEMI call to get the name of invalid clk
when executing versal_get_clock_info() function. This results in
error messages.
Added check for validating clock before saving clock attribute and
calling zynqmp_pm_clock_get_name() in versal_get_clock_info() function.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-4-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: Fix divider2 calculation

zynqmp_get_divider2_val() calculates, divider value of type DIV2 clock,
considering best possible combination of DIV1 and DIV2.

To find best possible values of DIV1 and DIV2, DIV1's parent rate
should be consider and not DIV2's parent rate since it would rate of
div1 clock. Consider a below topology,

out_clk->div2_clk->div1_clk->fixed_parent

where out_clk = (fixed_parent/div1_clk) / div2_clk, so parent clock
of div1_clk (i.e. out_clk) should be divided by div1_clk and div2_clk.

Existing code divides parent rate of div2_clk's clock instead of
div1_clk's parent rate, which is wrong.

Fix the same by considering div1's parent clock rate.

Fixes: 4ebd92d2e228 ("clk: zynqmp: Fix divider calculation")
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-3-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: zynqmp: Limit bestdiv with maxdiv

Clock divider value should not be greater than maximum divider value.
So use minimum of best divider or maximum divider value.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: Remove casting to bcm2835_clk_register

There are four different callback functions that are used for the
clk_register callback that all have different second parameter types.

bcm2835_register_pll -> struct bcm2835_pll_data
bcm2835_register_pll_divider -> struct bcm2835_pll_divider_data
bcm2835_register_clock -> struct bcm2835_clock_data
bcm2835_register_date -> struct bcm2835_gate_data

These callbacks are cast to bcm2835_clk_register so that there is no
error about incompatible pointer types. Unfortunately, this is a control
flow integrity violation, which verifies that the callback function's
types match the prototypes exactly before jumping.

[    0.857913] CFI failure (target: 0xffffff9334a81820):
[    0.857977] WARNING: CPU: 3 PID: 35 at kernel/cfi.c:29 __cfi_check_fail+0x50/0x58
[    0.857985] Modules linked in:
[    0.858007] CPU: 3 PID: 35 Comm: kworker/3:1 Not tainted 4.19.123-v8-01301-gdbb48f16956e4-dirty #1
[    0.858015] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[    0.858031] Workqueue: events 0xffffff9334a925c8
[    0.858046] pstate: 60000005 (nZCv daif -PAN -UAO)
[    0.858058] pc : __cfi_check_fail+0x50/0x58
[    0.858070] lr : __cfi_check_fail+0x50/0x58
[    0.858078] sp : ffffff800814ba90
[    0.858086] x29: ffffff800814ba90 x28: 000fffffffdfff3d
[    0.858101] x27: 00000000002000c2 x26: ffffff93355fdb18
[    0.858116] x25: 0000000000000000 x24: ffffff9334a81820
[    0.858131] x23: ffffff93357f3580 x22: ffffff9334af1000
[    0.858146] x21: a79b57e88f8ebc81 x20: ffffff93357f3580
[    0.858161] x19: ffffff9334a81820 x18: fffffff679769070
[    0.858175] x17: 0000000000000000 x16: 0000000000000000
[    0.858190] x15: 0000000000000004 x14: 000000000000003c
[    0.858205] x13: 0000000000003044 x12: 0000000000000000
[    0.858220] x11: b57e91cd641bae00 x10: b57e91cd641bae00
[    0.858235] x9 : b57e91cd641bae00 x8 : b57e91cd641bae00
[    0.858250] x7 : 0000000000000000 x6 : ffffff933591d4e5
[    0.858264] x5 : 0000000000000000 x4 : 0000000000000000
[    0.858279] x3 : ffffff800814b718 x2 : ffffff9334a84818
[    0.858293] x1 : ffffff9334bba66c x0 : 0000000000000029
[    0.858308] Call trace:
[    0.858321]  __cfi_check_fail+0x50/0x58
[    0.858337]  __cfi_check+0x3ab3c/0x4467c
[    0.858351]  bcm2835_clk_probe+0x210/0x2dc
[    0.858369]  platform_drv_probe+0xb0/0xfc
[    0.858380]  really_probe+0x4a0/0x5a8
[    0.858391]  driver_probe_device+0x68/0x104
[    0.858403]  __device_attach_driver+0x100/0x148
[    0.858418]  bus_for_each_drv+0xb0/0x12c
[    0.858431]  __device_attach.llvm.17225159516306086099+0xc0/0x168
[    0.858443]  bus_probe_device+0x44/0xfc
[    0.858455]  deferred_probe_work_func+0xa0/0xe0
[    0.858472]  process_one_work+0x210/0x538
[    0.858485]  worker_thread+0x2e8/0x478
[    0.858500]  kthread+0x154/0x164
[    0.858515]  ret_from_fork+0x10/0x18

To fix this, change the second parameter of all functions void * and use
a local variable with the correct type so that everything works
properly. With this, the only use of bcm2835_clk_register is in struct
bcm2835_clk_desc so we can just remove it and use the type directly.

Fixes: 56eb3a2ed972 ("clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-2-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: Fix return type of bcm2835_register_gate

bcm2835_register_gate is used as a callback for the clk_register member
of bcm2835_clk_desc, which expects a struct clk_hw * return type but
bcm2835_register_gate returns a struct clk *.

This discrepancy is hidden by the fact that bcm2835_register_gate is
cast to the typedef bcm2835_clk_register by the _REGISTER macro. This
turns out to be a control flow integrity violation, which is how this
was noticed.

Change the return type of bcm2835_register_gate to be struct clk_hw *
and use clk_hw_register_gate to do so. This should be a non-functional
change as clk_register_gate calls clk_hw_register_gate anyways but this
is needed to avoid issues with further changes.

Fixes: b19f009d4510 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-imx-5.8' of git://git./linux/kernel/git/shawnguo/linux into clk-imx

Pull i.MX clk driver updates from Shawn Guo:

- A few patches from Abel Vesa as preparation of adding audiomix clock
  support
- A couple of cleanups from Anson Huang on clk-sscg-pll and clk-pllv3
  driver
- Update imx7ulp clock driver to use imx_clk_hw_cpu() for making the
  change of ARM core clock easier
- Drop dependency on ARM64 for i.MX8M clock driver, as there is a move
  to support aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
  composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
  defined bit rates

* tag 'clk-imx-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice
  clk: imx: add imx8m_clk_hw_composite_bus
  clk: imx: add mux ops for i.MX8M composite clk
  clk: imx8m: migrate A53 clk root to use composite core
  clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code
  clk: imx8mp: Define gates for pll1/2 fixed dividers
  clk: imx: imx8mp: fix pll mux bit
  clk: imx8m: drop clk_hw_set_parent for A53
  dt-bindings: clocks: imx8mp: Add ids for audiomix clocks
  clk: imx: Add helpers for passing the device as argument
  clk: imx: pll14xx: Add the device as argument when registering
  clk: imx: gate2: Allow single bit gating clock
  clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait
  clk: imx: clk-sscg-pll: Remove unnecessary blank lines
  clk: imx: drop the dependency on ARM64 for i.MX8M
  clk: imx7ulp: make it easy to change ARM core clk
  clk: imx: imx6ul: change flexcan clock to support CiA bitrates

Merge tag 'for-5.8-clk' of git://git./linux/kernel/git/tegra/linux into clk-tegra

Pull Tegra clk driver updates from Thierry Reding:

These are a couple of changes to implement EMC frequency scaling on
Tegra210, CPU frequency scaling on Tegra20 and Tegra30 as well as a
special clock gate for the CSI test pattern generator on Tegra210.

* tag 'for-5.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: Add Tegra210 CSI TPG clock gate
  clk: tegra30: Use custom CCLK implementation
  clk: tegra20: Use custom CCLK implementation
  clk: tegra: cclk: Add helpers for handling PLLX rate changes
  clk: tegra: pll: Add pre/post rate-change hooks
  clk: tegra: Add custom CCLK implementation
  clk: tegra: Remove the old emc_mux clock for Tegra210
  clk: tegra: Implement Tegra210 EMC clock
  clk: tegra: Export functions for EMC clock scaling
  clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210
  clk: tegra: Rename Tegra124 EMC clock source file
  dt-bindings: clock: tegra: Add clock ID for CSI TPG clock

Merge tag 'sunxi-clk-for-5.8-1' of https://git./linux/kernel/git/sunxi/linux into clk-allwinner

Pull an Allwinner clk driver fix from Maxime Ripard:

 - a single minor rounding fix for the legacy Allwinner clock support

* tag 'sunxi-clk-for-5.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi: Fix incorrect usage of round_down()

Merge tag 'clk-v5.8-samsung' of https://git./linux/kernel/git/snawrocki/clk into clk-samsung

Pull Samsung clk driver updates from Sylwester Nawrocki:

 - Regression fixes for exynos542x and exynos5433 SoCs
 - use of fallthrough; attribute for s3c24xx

* tag 'clk-v5.8-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
  clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
  ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;
  clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x
  clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical

Merge tag 'clk-renesas-for-v5.8-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - A minor fix for the currently unused suspend/resume handling on
    RZ/A1 and RZ/A2
  - Two more conversions of Renesas DT bindings to json-schema

* tag 'clk-renesas-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  dt-bindings: clock: renesas: mstp: Convert to json-schema
  dt-bindings: clock: renesas: div6: Convert to json-schema
  clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling

clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice

Switch the bus clk use imx8m_clk_hw_composite_bus, then
we could avoid possible issue when setting mux of the clk.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: add imx8m_clk_hw_composite_bus

Introduce imx8m_clk_hw_composite_bus api for bus clk root slice usage.
Because the mux switch sequence issue, we could not reuse Peripheral
Clock Slice code, need use composite specific mux operation.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: add mux ops for i.MX8M composite clk

The CORE/BUS root slice has following design, simplied graph:
The difference is core not have pre_div block.
A composite core/bus clk has 8 inputs for mux to select, saying clk[0-7].

It support target(smart) interface and normal interface. Target interface
is exported for programmer easy to configure ccm root. Normal interface
is also exported, but we not use it in our driver, because it will
introduce more complexity compared with target interface.

The normal interface simplified as below:
            SEL_A  GA
            +--+  +-+
            |  +->+ +------+
CLK[0-7]--->+  |  +-+      |
       |    |  |      +----v---+    +----+
       |    +--+      |pre_diva+---->    |  +---------+
       |              +--------+    |mux +--+post_div |
       |    +--+      |pre_divb+--->+    |  +---------+
       |    |  |      +----^---+    +----+
       +--->+  |  +-+      |
            |  +->+ +------+
            +--+  +-+
            SEL_B  GB

The mux in the upper pic is not the target interface MUX, target
interface MUX is hiding SEL_A and SEL_B. When you choose clk[0-7],
you are actually writing SEL_A or SEL_B depends on the internal
counter which will also control the internal "mux".

The target interface simplified as below which is used by Linux Kernel:
CLK[0-7]--->MUX-->Gate-->pre_div-->post_div

A requirement of the Target Interface's software is that the
target clock source is active, it means when setting SEL_A, the
current input clk to SEL_A must be active, same to SEL_B.

We touch target interface, but hardware logic actually also need
configure normal interface.

There will be system hang, when doing the following steps:
The initial state:
  SEL_A/SEL_B are both sourcing from clk0, the internal counter
  choose SEL_A.
1. switch mux from clk0 to clk1
   The hardware logic will choose SEL_B and configure SEL_B to clk1.
   SEL_A no changed.
2. gate off clk0
   Disable clk0, then the input to SEL_A is off.
3. swtich from clk1 to clk2
   The hardware logic will choose SEL_A and configure SEL_A to clk2,
   however the current SEL_A input clk0 is off, the system hang.

The solution to fix the issue is in step 1, write twice to
target interface MUX, it will make SEL_A/SEL_B both sources
from clk1, then no need to care about the state of clk0. And
finally system performs well.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: clock: renesas: mstp: Convert to json-schema

Convert the Renesas Clock Pulse Generator (CPG) Module Stop (MSTP)
Clocks Device Tree binding documentation to json-schema.

Drop R-Car Gen2 compatible values, which were obsoleted by the unified
"Renesas Clock Pulse Generator / Module Standby and Software Reset" DT
bindings.
Replace the obsolete example for R-Car H2 by an example that is still
valid.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200508100321.6720-1-geert+renesas@glider.be

clk: imx8m: migrate A53 clk root to use composite core

Migrate A53 clk root to use composite core clk type. It
will simplify code and make it easy to use composite
specific mux operation.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code

Use imx8m_clk_hw_composite_core to simpliy clks that belong to
core clk slice.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mp: Define gates for pll1/2 fixed dividers

Inspried from
commit e8688fe8df7d ("clk: imx8mn: Define gates for pll1/2 fixed dividers")

On imx8mp there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2
each with their own gate. Only one of these gates (the one "dividing" by
one) is currently defined and it's incorrectly set as the parent of all
the fixed-factor dividers.

Add the other 8 gates to the clock tree between sys_pll1/2_bypass and
the fixed dividers.

Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: imx8mp: fix pll mux bit

Same to i.MX8MN/i.MX8MM, pll BYPASS bit should be kept inside pll
driver for glitchless freq setting following spec. If exposing the
bit, that means pll driver and clk driver has two paths to touch
this bit, which is wrong.

So use EXT_BYPASS bit here.

Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8m: drop clk_hw_set_parent for A53

The parent settings have been moved to dtsi, we no need to
set parent here. And clk_hw_set_parent will trigger lockdep warning,
because this api not have prepare_lock.

Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1

Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to
match its behaviour with SCLK clock for AUD_I2S (I2S0) device until
a proper fix for Exynos I2S driver is ready.

This fixes the following synchronous abort issue revealed by the probe
order change caused by the commit 93d2e4322aa7 ("of: platform: Batch
fwnode parsing when adding all top level devices")

Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
Hardware name: Samsung TM2E board (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : samsung_i2s_probe+0x768/0x8f0
lr : samsung_i2s_probe+0x688/0x8f0
...
Call trace:
 samsung_i2s_probe+0x768/0x8f0
 platform_drv_probe+0x50/0xa8
 really_probe+0x108/0x370
 driver_probe_device+0x54/0xb8
 __device_attach_driver+0x90/0xc0
 bus_for_each_drv+0x70/0xc8
 __device_attach+0xdc/0x140
 device_initial_probe+0x10/0x18
 bus_probe_device+0x94/0xa0
 deferred_probe_work_func+0x70/0xa8
 process_one_work+0x2a8/0x718
 worker_thread+0x48/0x470
 kthread+0x134/0x160
 ret_from_fork+0x10/0x1c
Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00)
---[ end trace ccf721c9400ddbd6 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C part
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

dt-bindings: clock: renesas: div6: Convert to json-schema

Convert the Renesas CPG DIV6 Clock Device Tree binding documentation to
json-schema.

Drop R-Car Gen2 compatible values, which were obsoleted by the unified
"Renesas Clock Pulse Generator / Module Standby and Software Reset" DT
bindings.
Update the example to match reality.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200507075026.31941-1-geert+renesas@glider.be

clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling

On SoCs with Standby Control Registers (STBCRs) instead of Module Stop
Control Registers (MSTPCRs), the suspend handler saves the wrong
registers, and the resume handler prints the wrong register in an error
message.

Fortunately this cannot happen yet, as the suspend/resume code is used
on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not
use PSCI.  Still, it is better to fix this, to avoid this becoming a
problem in the future.

Distinguish between STBCRs and MSTPCRs where needed.  Replace the
useless printing of the virtual register address in the resume error
message by printing the register index.

Fixes: fde35c9c7db5732c ("clk: renesas: cpg-mssr: Add R7S9210 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200507074713.30113-1-geert+renesas@glider.be

clk: qcom: Add DT bindings for MSM8939 GCC

Add compatible strings and the include files for the MSM8939 GCC.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lkml.kernel.org/r/20200512115023.2856617-2-bryan.odonoghue@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>