review.tizen.org Git - platform/kernel/linux-starfive.git/log

i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen

commit dfd7cd6aafdb1f5ba93828e97e56b38304b23a05 upstream.

Upon IBIWON timeout, the SDA line will always be kept low if we don't emit
a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to
idle state.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-6-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: fix check wrong status register in irq handler

commit 225d5ef048c4ed01a475c95d94833bd7dd61072d upstream.

svc_i3c_master_irq_handler() wrongly checks register SVC_I3C_MINTMASKED. It
should be SVC_I3C_MSTATUS.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-5-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: fix ibi may not return mandatory data byte

commit c85e209b799f12d18a90ae6353b997b1bb1274a5 upstream.

MSTATUS[RXPEND] is only updated after the data transfer cycle started. This
creates an issue when the I3C clock is slow, and the CPU is running fast
enough that MSTATUS[RXPEND] may not be updated when the code reaches
checking point. As a result, mandatory data can be missed.

Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is
already in FIFO. It also works without mandatory data.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-4-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: fix wrong data return when IBI happen during start frame

commit 5e5e3c92e748a6d859190e123b9193cf4911fcca upstream.

     ┌─────┐     ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┌─────
SCL: ┘     └─────┛  └──┛  └──┛  └──┛  └──┛  └──┛  └──┛  └──┛  └──┘
     ───┐                       ┌─────┐     ┌─────┐     ┌───────────┐
SDA:    └───────────────────────┘     └─────┘     └─────┘           └─────
     xxx╱    ╲╱                                        ╲╱    ╲╱    ╲╱    ╲
   : xxx╲IBI ╱╲               Addr(0x0a)               ╱╲ RW ╱╲NACK╱╲ S  ╱

If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately
scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and
attempts to send address 0x7e, the target interprets it as an
IBI handler and returns the target address 0x0a.

However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
with other transfers, resulting in incorrect data being returned.

Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs,
return a failure to the driver.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: fix race condition in ibi work thread

commit 6bf3fc268183816856c96b8794cd66146bc27b35 upstream.

The ibi work thread operates asynchronously with other transfers, such as
svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the
completion of the entire i3c/i2c transaction.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: cdns: Fix reading status register

commit 4bd8405257da717cd556f99e5fb68693d12c9766 upstream.

IBIR_DEPTH and CMDR_DEPTH should read from status0 instead of status1.

Cc: stable@vger.kernel.org
Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230913031743.11439-2-joshua.yeong@starfivetech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0001: Byte swap OTP info

commit 565fe150624ee77dc63a735cc1b3bff5101f38a3 upstream.

Currently the offset into the device when looking for OTP
bits can go outside of the address of the MTD NOR devices,
and if that memory isn't readable, bad things happen
on the IXP4xx (added prints that illustrate the problem before
the crash):

cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x00000100
ixp4xx_copy_from copy from 0x00000100 to 0xc880dd78
cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x12000000
ixp4xx_copy_from copy from 0x12000000 to 0xc880dd78
8<--- cut here ---
Unable to handle kernel paging request at virtual address db000000
[db000000] *pgd=00000000
(...)

This happens in this case because the IXP4xx is big endian and
the 32- and 16-bit fields in the struct cfi_intelext_otpinfo are not
properly byteswapped. Compare to how the code in read_pri_intelext()
byteswaps the fields in struct cfi_pri_intelext.

Adding a small byte swapping loop for the OTP in read_pri_intelext()
and the crash goes away.

The problem went unnoticed for many years until I enabled
CONFIG_MTD_OTP on the IXP4xx as well, triggering the bug.

Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231020-mtd-otp-byteswap-v4-1-0d132c06aa9d@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: use pfn math in place of direct struct page manipulation

commit 1640a0ef80f6d572725f5b0330038c18e98ea168 upstream.

When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to
handle it properly.

Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes: eeb0efd071d8 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/cma: use nth_page() in place of direct struct page manipulation

commit 2e7cfe5cd5b6b0b98abf57a3074885979e187c1c upstream.

Patch series "Use nth_page() in place of direct struct page manipulation",
v3.

On SPARSEMEM without VMEMMAP, struct page is not guaranteed to be
contiguous, since each memory section's memmap might be allocated
independently.  hugetlb pages can go beyond a memory section size, thus
direct struct page manipulation on hugetlb pages/subpages might give wrong
struct page.  Kernel provides nth_page() to do the manipulation properly.
Use that whenever code can see hugetlb pages.

This patch (of 5):

When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP.  Use nth_page() to handle
it properly.

Without the fix, page_kasan_tag_reset() could reset wrong page tags,
causing a wrong kasan result.  No related bug is reported.  The fix
comes from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20230913201248.452081-2-zi.yan@sent.com
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cmma: fix detection of DAT pages

commit 44d93045247661acbd50b1629e62f415f2747577 upstream.

If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.

This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.

This can result in incorrect guest TLB flushes.

Fix this by simply marking all four pages.

Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-mdma: correct desc prep when channel running

commit 03f25d53b145bc2f7ccc82fc04e4482ed734f524 upstream.

In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set. This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mcb: fix error handling for different scenarios when parsing

commit 63ba2d07b4be72b94216d20561f43e1150b25d98 upstream.

chameleon_parse_gdd() may fail for different reasons and end up
in the err tag. Make sure we at least always free the mcb_device
allocated with mcb_alloc_dev().

If mcb_device_register() fails, make sure to give up the reference
in the same place the device was added.

Fixes: 728ac3389296 ("mcb: mcb-parse: fix error handing in chameleon_parse_gdd()")
Cc: stable <stable@kernel.org>
Reviewed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Link: https://lore.kernel.org/r/20231019141434.57971-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Release all resources during unbind before updating device links

commit 2e84dc37920012b458e9458b19fc4ed33f81bc74 upstream.

This commit fixes a bug in commit 9ed9895370ae ("driver core: Functional
dependencies tracking support") where the device link status was
incorrectly updated in the driver unbind path before all the device's
resources were released.

Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support")
Cc: stable <stable@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/all/20231014161721.f4iqyroddkcyoefo@pengutronix.de/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: James Clark <james.clark@arm.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231018013851.3303928-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have the user copy of synthetic event address use correct context

commit 4f7969bcd6d33042d62e249b41b5578161e4c868 upstream.

A synthetic event is created by the synthetic event interface that can
read both user or kernel address memory. In reality, it reads any
arbitrary memory location from within the kernel. If the address space is
in USER (where CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE is set) then
it uses strncpy_from_user_nofault() to copy strings otherwise it uses
strncpy_from_kernel_nofault().

But since both functions use the same variable there's no annotation to
what that variable is (ie. __user). This makes sparse complain.

Quiet sparse by typecasting the strncpy_from_user_nofault() variable to
a __user pointer.

Link: https://lore.kernel.org/linux-trace-kernel/20231031151033.73c42e23@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0934ae9977c2 ("tracing: Fix reading strings from synthetic events");
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311010013.fm8WTxa5-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: Run atomic i2c xfer when !preemptible

commit aa49c90894d06e18a1ee7c095edbd2f37c232d02 upstream.

Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is
disabled. However, non-atomic i2c transfers require preemption (e.g. in
wait_for_completion() while waiting for the DMA).

panic() calls preempt_disable_notrace() before calling
emergency_restart(). Therefore, if an i2c device is used for the
restart, the xfer should be atomic. This avoids warnings like:

[   12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[   12.676926] Voluntary context switch within RCU read-side critical section!
...
[   12.742376]  schedule_timeout from wait_for_completion_timeout+0x90/0x114
[   12.749179]  wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[   12.994527]  atomic_notifier_call_chain from machine_restart+0x34/0x58
[   13.001050]  machine_restart from panic+0x2a8/0x32c

Use !preemptible() instead, which is basically the same check as
pre-v5.2.

Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-2-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/reboot: emergency_restart: Set correct system_state

commit 60466c067927abbcaff299845abd4b7069963139 upstream.

As the emergency restart does not call kernel_restart_prepare(), the
system_state stays in SYSTEM_RUNNING.

Since bae1d3a05a8b, this hinders i2c_in_atomic_xfer_mode() from becoming
active, and therefore might lead to avoidable warnings in the restart
handlers, e.g.:

[   12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[   12.676926] Voluntary context switch within RCU read-side critical section!
...
[   12.742376]  schedule_timeout from wait_for_completion_timeout+0x90/0x114
[   12.749179]  wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[   12.994527]  atomic_notifier_call_chain from machine_restart+0x34/0x58
[   13.001050]  machine_restart from panic+0x2a8/0x32c

Avoid these by setting the correct system_state.

Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-1-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: explicitly forbid quota files from being encrypted

commit d3cc1b0be258191d6360c82ea158c2972f8d3991 upstream.

Since commit d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key"), xfstest generic/270 causes a WARNING when run on
f2fs with test_dummy_encryption in the mount options:

$ kvm-xfstests -c f2fs/encrypt generic/270
[...]
WARNING: CPU: 1 PID: 2453 at fs/crypto/keyring.c:240 fscrypt_destroy_keyring+0x1f5/0x260

The cause of the WARNING is that not all encrypted inodes have been
evicted before fscrypt_destroy_keyring() is called, which violates an
assumption.  This happens because the test uses an external quota file,
which gets automatically encrypted due to test_dummy_encryption.

Encryption of quota files has never really been supported.  On ext4,
ext4_quota_read() does not decrypt the data, so encrypted quota files
are always considered invalid on ext4.  On f2fs, f2fs_quota_read() uses
the pagecache, so trying to use an encrypted quota file gets farther,
resulting in the issue described above being possible.  But this was
never intended to be possible, and there is no use case for it.

Therefore, make the quota support layer explicitly reject using
IS_ENCRYPTED inodes when quotaon is attempted.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230905003227.326998-1-ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev

commit 61187fce8600e8ef90e601be84f9d0f3222c1206 upstream.

JBD2 makes sure journal data is fallen on fs device by sync_blockdev(),
however, other process could intercept the EIO information from bdev's
mapping, which leads journal recovering successful even EIO occurs during
data written back to fs device.

We found this problem in our product, iscsi + multipath is chosen for block
device of ext4. Unstable network may trigger kpartx to rescan partitions in
device mapper layer. Detailed process is shown as following:

  mount          kpartx          irq
jbd2_journal_recover
do_one_pass
  memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal
  mark_buffer_dirty // mark bh dirty
         vfs_read
  generic_file_read_iter // dio
   filemap_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      block_write_full_folio
       submit_bh_wbc
            >>  EIO occurs in disk  <<
                     end_buffer_async_write
      mark_buffer_write_io_error
       mapping_set_error
        set_bit(AS_EIO, &mapping->flags) // set!
    filemap_check_errors
     test_and_clear_bit(AS_EIO, &mapping->flags) // clear!
err2 = sync_blockdev
  filemap_write_and_wait
   filemap_check_errors
    test_and_clear_bit(AS_EIO, &mapping->flags) // false
err2 = 0

Filesystem is mounted successfully even data from journal is failed written
into disk, and ext4/ocfs2 could become corrupted.

Fix it by comparing the wb_err state in fs block device before recovering
and after recovering.

A reproducer can be found in the kernel bugzilla referenced below.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230919012525.1783108-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wsa-macro: fix uninitialized stack variables with name prefix

commit 72151ad0cba8a07df90130ff62c979520d71f23b upstream.

Driver compares widget name in wsa_macro_spk_boost_event() widget event
callback, however it does not handle component's name prefix. This
leads to using uninitialized stack variables as registers and register
values. Handle gracefully such case.

Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155422.801160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hid: lenovo: Resend all settings on reset_resume for compact keyboards

commit 2f2bd7cbd1d1548137b351040dc4e037d18cdfdc upstream.

The USB Compact Keyboard variant requires a reset_resume function to
restore keyboard configuration after a suspend in some situations. Move
configuration normally done on probe to lenovo_features_set_cptkbd(), then
recycle this for use on reset_resume.

Without, the keyboard and driver would end up in an inconsistent state,
breaking middle-button scrolling amongst other problems, and twiddling
sysfs values wouldn't help as the middle-button mode won't be set until
the driver is reloaded.

Tested on a USB and Bluetooth Thinkpad Compact Keyboard.

CC: stable@vger.kernel.org
Fixes: 94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/20231002150914.22101-1-martink@posteo.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests

commit ef43c30858754d99373a63dff33280a9969b49bc upstream.

The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in

commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).

When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.

Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.

Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>

Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Move _GNU_SOURCE define into Makefile

commit 3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream.

_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.

It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Remove duplicate feature check from CMT test

commit 030b48fb2cf045dead8ee2c5ead560930044c029 upstream.

The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.

Remove the duplicated feature check for CMT from cmt_resctrl_val().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: split async and sync catchall in two functions

[ Upstream commit 8837ba3e58ea1e3d09ae36db80b1e80853aada95 ]

list_for_each_entry_safe() does not work for the async case which runs
under RCU, therefore, split GC logic for catchall in two functions
instead, one for each of the sync and async GC variants.

The catchall sync GC variant never sees a _DEAD bit set on ever, thus,
this handling is removed in such case, moreover, allocate GC sync batch
via GFP_KERNEL.

Fixes: 93995bf4af2c ("netfilter: nf_tables: remove catchall element in GC sync path")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: remove catchall element in GC sync path

[ Upstream commit 93995bf4af2c5a99e2a87f0cd5ce547d31eb7630 ]

The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.

Fixes: 4a9e12ea7e70 ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: detect changes to the backing overlay file

commit b836c4d29f2744200b2af41e14bf50758dddc818 upstream.

Commit 18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.

Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: annotate iint mutex to avoid lockdep false positive warnings

commit e044374a8a0a99e46f4e6d6751d3042b6d9cc12e upstream.

It is not clear that IMA should be nested at all, but as long is it
measures files both on overlayfs and on underlying fs, we need to
annotate the iint mutex to avoid lockdep false positives related to
IMA + overlayfs, same as overlayfs annotates the inode mutex.

Reported-and-tested-by: syzbot+b42fe626038981fb7bfa@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: qcom-spmi-pmic: Fix revid implementation

commit 7b439aaa62fee474a0d84d67a25f4984467e7b95 upstream.

The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.

First, it assumes that just because the sibling base device has been
registered that means that it is also bound to a driver, which may not
be the case (e.g. due to probe deferral or asynchronous probe). This
could trigger a NULL-pointer dereference when attempting to access the
driver data of the unbound device.

Second, it accesses driver data of a sibling device directly and without
any locking, which means that the driver data may be freed while it is
being accessed (e.g. on driver unbind).

Third, it leaks a struct device reference to the sibling device which is
looked up using the spmi_device_from_of() every time a function (child)
device is calling the revid function (e.g. on probe).

Fix this mess by reimplementing the revid lookup so that it is done only
at probe of the PMIC device; the base device fetches the revid info from
the hardware, while any secondary SPMI device fetches the information
from the base device and caches it so that it can be accessed safely
from its children. If the base device has not been probed yet then probe
of a secondary device is deferred.

Fixes: e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-3-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: qcom-spmi-pmic: Fix reference leaks in revid helper

commit a0fa44c261e448c531f9adb3a5189a3520f3e316 upstream.

The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.

First, it totally ignores struct device_node reference counting and
leaks references to the parent bus node as well as each child it
iterates over using an open-coded for_each_child_of_node().

Second, it leaks references to each spmi device on the bus that it
iterates over by failing to drop the reference taken by the
spmi_device_from_of() helper.

Fix the struct device_node leaks by reimplementing the lookup using
for_each_child_of_node() and adding the missing reference count
decrements. Fix the sibling struct device leaks by dropping the
unnecessary lookups of devices with the wrong USID.

Note that this still leaves one struct device reference leak in case a
base device is found but it is not the parent of the device used for the
lookup. This will be addressed in a follow-on patch.

Fixes: e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-2-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size

commit 72fc3d58b87b0d622039c6299b89024fbb7b420f upstream.

IPQ6018's TCSR Mutex HW lock register has 32 locks of size 4KB each.
Total size of the TCSR Mutex registers is 128KB.

Fix size of the tcsr_mutex hwlock register to 0x20000.

Changes in v2:
- Drop change to remove qcom,ipq6018-tcsr-mutex compatible string
- Added Fixes and stable tags

Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905095535.1263113-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: FPDT: properly handle invalid FPDT subtables

commit a83c68a3bf7c418c9a46693c63c638852b0c1f4e upstream.

Buggy BIOSes may have invalid FPDT subtables, e.g. on my hardware:

S3PT subtable:

7F20FE30: 53 33 50 54 24 00 00 00-00 00 00 00 00 00 18 01  *S3PT$...........*
7F20FE40: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00  *................*
7F20FE50: 00 00 00 00

Here the first record has zero length.

FBPT subtable:

7F20FE50:             46 42 50 54-3C 00 00 00 46 42 50 54  *....FBPT<...FBPT*
7F20FE60: 02 00 30 02 00 00 00 00-00 00 00 00 00 00 00 00  *..0.............*
7F20FE70: 2A A6 BC 6E 0B 00 00 00-1A 44 41 70 0B 00 00 00  **..n.....DAp....*
7F20FE80: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00  *................*

And here FBPT table has FBPT signature repeated instead of the first
record.

Current code will be looping indefinitely due to zero length records, so
break out of the loop if record length is zero.

While we are here, add proper handling for fpdt_process_subtable()
failures.

Fixes: d1eb86e59be0 ("ACPI: tables: introduce support for FPDT table")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ rjw: Comment edit, added empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit

commit 3337a6fea25370d3d244ec6bb38c71ee86fcf837 upstream.

Per the "SMC calling convention specification", the 64-bit calling
convention can only be used when the client is 64-bit. Whereas the
32-bit calling convention can be used by either a 32-bit or a 64-bit
client.

Currently during SCM probe, irrespective of the client, 64-bit calling
convention is made, which is incorrect and may lead to the undefined
behaviour when the client is 32-bit. Let's fix it.

Cc: stable@vger.kernel.org
Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Reviewed-By: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM

commit 8a781d04e580705d36f7db07f5c80e748100b69d upstream.

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ8074.

Cc: stable@vger.kernel.org
Fixes: 42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't arbitrarily slow down delalloc if we're committing

commit 11aeb97b45ad2e0040cbb2a589bc403152526345 upstream.

We have a random schedule_timeout() if the current transaction is
committing, which seems to be a holdover from the original delalloc
reservation code.

Remove this, we have the proper flushing stuff, we shouldn't be hoping
for random timing things to make everything work. This just induces
latency for no reason.

CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects

commit 5f98fd034ca6fd1ab8c91a3488968a0e9caaabf6 upstream.

Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.

Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://lore.kernel.org/all/F903A825-F05F-4B77-A2B5-7356282FBA2C@apple.com/
Cc: <stable@vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: hibernate: Clean up sync_read handling in snapshot_write_next()

commit d08970df1980476f27936e24d452550f3e9e92e1 upstream.

In snapshot_write_next(), sync_read is set and unset in three different
spots unnecessiarly. As a result there is a subtle bug where the first
page after the meta data has been loaded unconditionally sets sync_read
to 0. If this first PFN was actually a highmem page, then the returned
buffer will be the global "buffer," and the page needs to be loaded
synchronously.

That is, I'm not sure we can always assume the following to be safe:

handle->buffer = get_buffer(&orig_bm, &ca);
handle->sync_read = 0;

Because get_buffer() can call get_highmem_page_buffer() which can
return 'buffer'.

The easiest way to address this is just set sync_read before
snapshot_write_next() returns if handle->buffer == buffer.

Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: hibernate: Use __get_safe_page() rather than touching the list

commit f0c7183008b41e92fa676406d87f18773724b48b upstream.

We found at least one situation where the safe pages list was empty and
get_buffer() would gladly try to use a NULL pointer.

Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM

commit 95d97b111e1e184b0c8656137033ed64f2cf21e4 upstream.

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ6018.

Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu/tree: Defer setting of jiffies during stall reset

commit b96e7a5fa0ba9cda32888e04f8f4bac42d49a7f8 upstream.

There are instances where rcu_cpu_stall_reset() is called when jiffies
did not get a chance to update for a long time. Before jiffies is
updated, the CPU stall detector can go off triggering false-positives
where a just-started grace period appears to be ages old. In the past,
we disabled stall detection in rcu_cpu_stall_reset() however this got
changed [1]. This is resulting in false-positives in KGDB usecase [2].

Fix this by deferring the update of jiffies to the third run of the FQS
loop. This is more robust, as, even if rcu_cpu_stall_reset() is called
just before jiffies is read, we would end up pushing out the jiffies
read by 3 more FQS loops. Meanwhile the CPU stall detection will be
delayed and we will not get any false positives.

[1] https://lore.kernel.org/all/20210521155624.174524-2-senozhatsky@chromium.org/
[2] https://lore.kernel.org/all/20230814020045.51950-2-chenhuacai@loongson.cn/

Tested with rcutorture.cpu_stall option as well to verify stall behavior
with/without patch.

Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Closes: https://lore.kernel.org/all/20230814020045.51950-2-chenhuacai@loongson.cn/
Suggested-by: Paul McKenney <paulmck@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: a80be428fbc1 ("rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svcrdma: Drop connection after an RDMA Read error

commit 197115ebf358cb440c73e868b2a0a5ef728decc6 upstream.

When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.

Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: wilc1000: use vmm_table as array in wilc struct

commit 05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream.

Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:

BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr c3a61540 by task wlan0-tx/95

KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)

Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: exynos: Don't discard .remove() callback

commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream.

With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: kirin: Don't discard .remove() callback

commit 3064ef2e88c1629c1e67a77d7bc20020b35846f2 upstream.

With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 000f60db784b ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()

commit 8e37372ad0bea4c9b4712d9943f6ae96cff9491f upstream.

aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.

Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask.  Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.

In this scenario:

  - Write 0 to "l1_aspm" to disable L1
  - Write 1 to "l1_1_aspm" to enable L1.1

the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.

Fix this by explicitly disabling all the L1.x substates when disabling L1.

Fixes: 72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A

commit ed9009ad300c0f15a3ecfe9613547b1962bde02c upstream.

Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci_am654: fix start loop index for TAP value parsing

commit 71956d0cb56c1e5f9feeb4819db87a076418e930 upstream.

ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.

Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: vub300: fix an error code

commit b44f9da81783fda72632ef9b0d05ea3f3ca447a5 upstream.

This error path should return -EINVAL instead of success.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/0769d30c-ad80-421b-bf5d-7d6f5d85604e@moroto.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix slab out of bounds write in smb_inherit_dacl()

commit eebff19acaa35820cb09ce2ccb3d21bee2156ffb upstream.

slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.

Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: handle malformed smb1 message

commit 5a5409d90bd05f87fe5623a749ccfbf3f7c7d400 upstream.

If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.

Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks

commit 99cd4935cb972d0aafb16838bb2aeadbcaf196ce upstream.

GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.

Cc: stable@vger.kernel.org
Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks

commit e641a070137dd959932c7c222e000d9d941167a2 upstream.

GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.

Cc: stable@vger.kernel.org
Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data

commit d761bb01c85b22d5b44abe283eb89019693f6595 upstream.

`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:

include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381         unsigned int num;
1382         struct clk_hw *hws[] __counted_by(num);
1383 };

This could potentially lead to an overwrite of the objects following
`clk_data` in `struct stratix10_clock_data`, in this case
`void __iomem *base;` at run-time:

drivers/clk/socfpga/stratix10-clk.h:
  9 struct stratix10_clock_data {
10         struct clk_hw_onecell_data      clk_data;
11         void __iomem            *base;
12 };

There are currently three different places where memory is allocated for
`struct stratix10_clock_data`, including the flex-array `hws` in
`struct clk_hw_onecell_data`:

drivers/clk/socfpga/clk-agilex.c:
469         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470                                 num_clks), GFP_KERNEL);

drivers/clk/socfpga/clk-agilex.c:
509         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
510                                 num_clks), GFP_KERNEL);

drivers/clk/socfpga/clk-s10.c:
400         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
401                                                  num_clks), GFP_KERNEL);

I'll use just one of them to describe the issue. See below.

Notice that a total of 440 bytes are allocated for flexible-array member
`hws` at line 469:

include/dt-bindings/clock/agilex-clock.h:
70 #define AGILEX_NUM_CLKS 55

drivers/clk/socfpga/clk-agilex.c:
459         struct stratix10_clock_data *clk_data;
460         void __iomem *base;
...
466
467         num_clks = AGILEX_NUM_CLKS;
468
469         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470                                 num_clks), GFP_KERNEL);

`struct_size(clk_data, clk_data.hws, num_clks)` above translates to
sizeof(struct stratix10_clock_data) + sizeof(struct clk_hw *) * 55 ==
16 + 8 * 55 == 16 + 440
    ^^^
     |
allocated bytes for flex-array `hws`

474         for (i = 0; i < num_clks; i++)
475                 clk_data->clk_data.hws[i] = ERR_PTR(-ENOENT);
476
477         clk_data->base = base;

and then some data is written into both `hws` and `base` objects.

Fix this by placing the declaration of object `clk_data` at the end of
`struct stratix10_clock_data`. Also, add a comment to make it clear
that this object must always be last in the structure.

-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.

Fixes: ba7e258425ac ("clk: socfpga: Convert to s10/agilex/n5x to use clk_hw")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/1da736106d8e0806aeafa6e471a13ced490eae22.1698117815.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/power: Add power soft-off when running on qemu

commit d0c219472980d15f5cbc5c8aec736848bda3f235 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/pdc: Add width field to struct pdc_model

commit 6240553b52c475d9fc9674de0521b77e692f3764 upstream.

PDC2.0 specifies the additional PSW-bit field.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer

commit 146a15b873353f8ac28dc281c139ff611a3c4848 upstream.

Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
byte-swap NOP when compiling for big-endian, and the resulting series of
bytes happened to match the encoding of FNMADD S21, S30, S0, S0.

This went unnoticed until commit:

  34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD")

Prior to that commit, the kernel would always enable the use of FPSIMD
early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
FNMADD within the kernel was not detected, but could result in the
corruption of user or kernel FPSIMD state.

After that commit, the instructions happen to trap during boot prior to
FPSIMD being detected and enabled, e.g.

| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __pi_strcmp+0x1c/0x150
| lr : populate_properties+0xe4/0x254
| sp : ffffd014173d3ad0
| x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000
| x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008
| x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044
| x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005
| x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000
| x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000
| x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000
| x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a
| x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
|  dump_backtrace+0xec/0x108
|  show_stack+0x18/0x2c
|  dump_stack_lvl+0x50/0x68
|  dump_stack+0x18/0x24
|  panic+0x13c/0x340
|  el1t_64_irq_handler+0x0/0x1c
|  el1_abort+0x0/0x5c
|  el1h_64_sync+0x64/0x68
|  __pi_strcmp+0x1c/0x150
|  unflatten_dt_nodes+0x1e8/0x2d8
|  __unflatten_device_tree+0x5c/0x15c
|  unflatten_device_tree+0x38/0x50
|  setup_arch+0x164/0x1e0
|  start_kernel+0x64/0x38c
|  __primary_switched+0xbc/0xc4

Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
commit.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
Link: https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Don't discard .probe() callback

commit 7994db905c0fd692cf04c527585f08a91b560144 upstream.

The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.

The right thing to do is do always have the probe callback available. Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Don't discard .remove() callback

commit 200bddbb3f5202bbce96444fdc416305de14f547 upstream.

With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: Rollback init_trusted() consistently

commit 31de287345f41bbfaec36a5c8cbdba035cf76442 upstream.

Do bind neither static calls nor trusted_key_exit() before a successful
init, in order to maintain a consistent state. In addition, depart the
init_trusted() in the case of a real error (i.e. getting back something
else than -ENODEV).

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/linux-integrity/CAHk-=whOPoLaWM8S8GgoOPT7a2+nMH5h3TLKtn=R_3w4R1_Uvg@mail.gmail.com/
Cc: stable@vger.kernel.org # v5.13+
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: tee: Refactor register SHM usage

commit c745cd1718b7825d69315fe7127e2e289e617598 upstream.

The OP-TEE driver using the old SMC based ABI permits overlapping shared
buffers, but with the new FF-A based ABI each physical page may only
be registered once.

As the key and blob buffer are allocated adjancently, there is no need
for redundant register shared memory invocation. Also, it is incompatibile
with FF-A based ABI limitation. So refactor register shared memory
implementation to use only single invocation to register both key and blob
buffers.

[jarkko: Added cc to stable.]
Cc: stable@vger.kernel.org # v5.16+
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware

commit 5e7afb2eb7b2a7c81e9f608cbdf74a07606fd1b5 upstream.

irq_remove_generic_chip() calculates the Linux interrupt number for removing the
handler and interrupt chip based on gc::irq_base as a linear function of
the bit positions of set bits in the @msk argument.

When the generic chip is present in an irq domain, i.e. created with a call
to irq_alloc_domain_generic_chips(), gc::irq_base contains not the base
Linux interrupt number. It contains the base hardware interrupt for this
chip. It is set to 0 for the first chip in the domain, 0 + N for the next
chip, where $N is the number of hardware interrupts per chip.

That means the Linux interrupt number cannot be calculated based on
gc::irq_base for irqdomain based chips without a domain map lookup, which
is currently missing.

Rework the code to take the irqdomain case into account and calculate the
Linux interrupt number by a irqdomain lookup of the domain specific
hardware interrupt number.

[ tglx: Massage changelog. Reshuffle the logic and add a proper comment. ]

Fixes: cfefd21e693d ("genirq: Add chip suspend and resume callbacks")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024150335.322282-1-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-gx: Remove setting of CMD_CFG_ERROR

commit 57925e16c9f7d18012bcf45bfa658f92c087981a upstream.

For the t7 and older SoC families, the CMD_CFG_ERROR has no effect.
Starting from SoC family C3, setting this bit without SG LINK data
address will cause the controller to generate an IRQ and stop working.

To fix it, don't set the bit CMD_CFG_ERROR anymore.

Fixes: 18f92bc02f17 ("mmc: meson-gx: make sure the descriptor is stopped on errors")
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026073156.2868310-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix gtk offload status event locking

commit 1dea3c0720a146bd7193969f2847ccfed5be2221 upstream.

The ath11k active pdevs are protected by RCU but the gtk offload status
event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not
marked as a read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload")
Cc: stable@vger.kernel.org # 5.18
Cc: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix htt pktlog locking

commit 3f77c7d605b29df277d77e9ee75d96e7ad145d2d upstream.

The ath11k active pdevs are protected by RCU but the htt pktlog handling
code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix dfs radar event locking

commit 3b6c14833165f689cc5928574ebafe52bbce5f1e upstream.

The ath11k active pdevs are protected by RCU but the DFS radar event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix temperature event locking

commit 1a5352a81b4720ba43d9c899974e3bddf7ce0ce8 upstream.

The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:

=============================
WARNING: suspicious RCU usage
6.6.0-rc6 #7 Not tainted
-----------------------------
drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
...
Call trace:
...
lockdep_rcu_suspicious+0x16c/0x22c
ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: a41d10348b01 ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org # 5.7
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: Ensure range selector registers are updated after cache sync

commit 0ec7731655de196bc1e4af99e495b38778109d22 upstream.

When we sync the register cache we do so with the cache bypassed in order
to avoid overhead from writing the synced values back into the cache. If
the regmap has ranges and the selector register for those ranges is in a
register which is cached this has the unfortunate side effect of meaning
that the physical and cached copies of the selector register can be out of
sync after a cache sync. The cache will have whatever the selector was when
the sync started and the hardware will have the selector for the register
that was synced last.

Fix this by rewriting all cached selector registers after every sync,
ensuring that the hardware and cache have the same content. This will
result in extra writes that wouldn't otherwise be needed but is simple
so hopefully robust. We don't read from the hardware since not all
devices have physical read support.

Given that nobody noticed this until now it is likely that we are rarely if
ever hitting this case.

Reported-by: Hector Martin <marcan@marcan.st>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: resource: Do IRQ override on TongFang GMxXGxx

commit 0da9eccde3270b832c059ad618bf66e510c75d33 upstream.

The TongFang GMxXGxx/TUXEDO Stellaris/Pollaris Gen5 needs IRQ overriding
for the keyboard to work.

Adding an entry for this laptop to the override_table makes the internal
keyboard functional.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/sysfs: check error from damon_sysfs_update_target()

commit b4936b544b08ed44949055b92bd25f77759ebafc upstream.

Patch series "mm/damon/sysfs: fix unhandled return values".

Some of DAMON sysfs interface code is not handling return values from some
functions.  As a result, confusing user input handling or NULL-dereference
is possible.  Check those properly.

This patch (of 3):

damon_sysfs_update_target() returns error code for failures, but its
caller, damon_sysfs_set_targets() is ignoring that.  The update function
seems making no critical change in case of such failures, but the behavior
will look like DAMON sysfs is silently ignoring or only partially
accepting the user input.  Fix it.

Link: https://lkml.kernel.org/r/20231106233408.51159-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231106233408.51159-2-sj@kernel.org
Fixes: 19467a950b49 ("mm/damon/sysfs: remove requested targets when online-commit inputs")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon: implement a function for max nr_accesses safe calculation

commit 35f5d94187a6a3a8df2cba54beccca1c2379edb8 upstream.

Patch series "avoid divide-by-zero due to max_nr_accesses overflow".

The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval.  Some logics
in DAMON uses the maximum nr_accesses as a divisor.  Hence, the value
shouldn't be zero.  Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval.  However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting.

Avoid the divide-by-zero by implementing a function that handles the
corner case (first patch), and replaces the vulnerable direct max
nr_accesses calculations (remaining patches).

Note that the patches for the replacements are divided for broken commits,
to make backporting on required tres easier.  Especially, the last patch
is for a patch that not yet merged into the mainline but in mm tree.

This patch (of 4):

The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval.  Some logics
in DAMON uses the maximum nr_accesses as a divisor.  Hence, the value
shouldn't be zero.  Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval.  However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting.  Implement a function
that handles the corner case.

Note that this commit is not fixing the real issue since this is only
introducing the safe function that will replaces the problematic
divisions.  The replacements will be made by followup commits, to make
backporting on stable series easier.

Link: https://lkml.kernel.org/r/20231019194924.100347-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231019194924.100347-2-sj@kernel.org
Fixes: 198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/ops-common: avoid divide-by-zero during region hotness calculation

commit 3bafc47d3c4a2fc4d3b382aeb3c087f8fc84d9fd upstream.

When calculating the hotness of each region for the under-quota regions
prioritization, DAMON divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.

Link: https://lkml.kernel.org/r/20231019194924.100347-4-sj@kernel.org
Fixes: 198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/lru_sort: avoid divide-by-zero in hot threshold calculation

commit 44063f125af4bb4efd1d500d8091fa33a98af325 upstream.

When calculating the hotness threshold for lru_prio scheme of
DAMON_LRU_SORT, the module divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.

Link: https://lkml.kernel.org/r/20231019194924.100347-5-sj@kernel.org
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: move softlockup_panic back to early_param

commit 8b793bcda61f6c3ed4f5b2ded7530ef6749580cb upstream.

Setting softlockup_panic from do_sysctl_args() causes it to take effect
later in boot.  The lockup detector is enabled before SMP is brought
online, but do_sysctl_args runs afterwards.  If a user wants to set
softlockup_panic on boot and have it trigger should a softlockup occur
during onlining of the non-boot processors, they could do this prior to
commit f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot
parameters to sysctl aliases").  However, after this commit the value
of softlockup_panic is set too late to be of help for this type of
problem.  Restore the prior behavior.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot parameters to sysctl aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/sysfs: update monitoring target regions for online input commit

commit 9732336006764e2ee61225387e3c70eae9139035 upstream.

When user input is committed online, DAMON sysfs interface is ignoring the
user input for the monitoring target regions.  Such request is valid and
useful for fixed monitoring target regions-based monitoring ops like
'paddr' or 'fvaddr'.

Update the region boundaries as user specified, too.  Note that the
monitoring results of the regions that overlap between the latest
monitoring target regions and the new target regions are preserved.

Treat empty monitoring target regions user request as a request to just
make no change to the monitoring target regions.  Otherwise, users should
set the monitoring target regions same to current one for every online
input commit, and it could be challenging for dynamic monitoring target
regions update DAMON ops like 'vaddr'.  If the user really need to remove
all monitoring target regions, they can simply remove the target and then
create the target again with empty target regions.

Link: https://lkml.kernel.org/r/20231031170131.46972-1-sj@kernel.org
Fixes: da87878010e5 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/sysfs: remove requested targets when online-commit inputs

commit 19467a950b49432a84bf6dbadbbb17bdf89418b7 upstream.

damon_sysfs_set_targets(), which updates the targets of the context for
online commitment, do not remove targets that removed from the
corresponding sysfs files.  As a result, more than intended targets of the
context can exist and hence consume memory and monitoring CPU resource
more than expected.

Fix it by removing all targets of the context and fill up again using the
user input.  This could cause unnecessary memory dealloc and realloc
operations, but this is not a hot code path.  Also, note that damon_target
is stateless, and hence no data is lost.

[sj@kernel.org: fix unnecessary monitoring results removal]
Link: https://lkml.kernel.org/r/20231028213353.45397-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231022210735.46409-2-sj@kernel.org
Fixes: da87878010e5 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: <stable@vger.kernel.org> [5.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/sysfs: Protect driver's D3cold preference from user space

commit 70b70a4307cccebe91388337b1c85735ce4de6ff upstream.

struct pci_dev contains two flags which govern whether the device may
suspend to D3cold:

* no_d3cold provides an opt-out for drivers (e.g. if a device is known
  to not wake from D3cold)

* d3cold_allowed provides an opt-out for user space (default is true,
  user space may set to false)

Since commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend"),
the user space setting overwrites the driver setting.  Essentially user
space is trusted to know better than the driver whether D3cold is
working.

That feels unsafe and wrong.  Assume that the change was introduced
inadvertently and do not overwrite no_d3cold when d3cold_allowed is
modified.  Instead, consider d3cold_allowed in addition to no_d3cold
when choosing a suspend state for the device.

That way, user space may opt out of D3cold if the driver hasn't, but it
may no longer force an opt in if the driver has opted out.

Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/b8a7f4af2b73f6b506ad8ddee59d747cbf834606.1695025365.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hvc/xen: fix event channel handling for secondary consoles

commit ef5dd8ec88ac11e8e353164407d55b73c988b369 upstream.

The xencons_connect_backend() function allocates a local interdomain
event channel with xenbus_alloc_evtchn(), then calls
bind_interdomain_evtchn_to_irq_lateeoi() to bind to that port# on the
*remote* domain.

That doesn't work very well:

(qemu) device_add xen-console,id=con1,chardev=pty0
[ 44.323872] xenconsole console-1: 2 xenbus_dev_probe on device/console/1
[ 44.323995] xenconsole: probe of console-1 failed with error -2

Fix it to use bind_evtchn_to_irq_lateeoi(), which does the right thing
by just binding that *local* event channel to an irq. The backend will
do the interdomain binding.

This didn't affect the primary console because the setup for that is
special — the toolstack allocates the guest event channel and the guest
discovers it with HVMOP_get_param.

Fixes: fe415186b43d ("xen/console: harden hvc_xen against event channel storms")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hvc/xen: fix error path in xen_hvc_init() to always register frontend driver

commit 2704c9a5593f4a47620c12dad78838ca62b52f48 upstream.

The xen_hvc_init() function should always register the frontend driver,
even when there's no primary console — as there may be secondary consoles.
(Qemu can always add secondary consoles, but only the toolstack can add
the primary because it's special.)

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-3-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hvc/xen: fix console unplug

commit a30badfd7c13fc8763a9e10c5a12ba7f81515a55 upstream.

On unplug of a Xen console, xencons_disconnect_backend() unconditionally
calls free_irq() via unbind_from_irqhandler(), causing a warning of
freeing an already-free IRQ:

(qemu) device_del con1
[   32.050919] ------------[ cut here ]------------
[   32.050942] Trying to free already-free IRQ 33
[   32.050990] WARNING: CPU: 0 PID: 51 at kernel/irq/manage.c:1895 __free_irq+0x1d4/0x330

It should be using evtchn_put() to tear down the event channel binding,
and let the Linux IRQ side of it be handled by notifier_del_irq() through
the HVC code.

On which topic... xencons_disconnect_backend() should call hvc_remove()
*first*, rather than tearing down the event channel and grant mapping
while they are in use. And then the IRQ is guaranteed to be freed by
the time it's torn down by evtchn_put().

Since evtchn_put() also closes the actual event channel, avoid calling
xenbus_free_evtchn() except in the failure path where the IRQ was not
successfully set up.

However, calling hvc_remove() at the start of xencons_disconnect_backend()
still isn't early enough. An unplug request is indicated by the backend
setting its state to XenbusStateClosing, which triggers a notification
to xencons_backend_changed(), which... does nothing except set its own
frontend state directly to XenbusStateClosed without *actually* tearing
down the HVC device or, you know, making sure it isn't actively in use.

So the backend sees the guest frontend set its state to XenbusStateClosed
and stops servicing the interrupt... and the guest spins for ever in the
domU_write_console() function waiting for the ring to drain.

Fix that one by calling hvc_remove() from xencons_backend_changed() before
signalling to the backend that it's OK to proceed with the removal.

Tested with 'dd if=/dev/zero of=/dev/hvc1' while telling Qemu to remove
the console device.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-4-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: fix hard LOCKUP on crtscts mode

commit 2a1d728f20edeee7f26dc307ed9df4e0d23947ab upstream.

There might be hard lockup if we set crtscts mode on port without RTS/CTS configured:

# stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6
[   95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[   95.890857] rcu:     3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984
[   95.900212] rcu:     (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4)
[   95.906972] Task dump for CPU 3:
[   95.910178] task:bash            state:R  running task     stack:0     pid:205   ppid:1      flags:0x00000202
[   95.920059] Call trace:
[   95.922485]  __switch_to+0xe4/0x168
[   95.925951]  0xffffff8003477508
[   95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3
[   95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc

Possible solution would be to not allow to setup crtscts on such port.

Tested on S905X3 based board.

Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Krasavin <pkrasavin@imaqliq.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/sysrq: replace smp_processor_id() with get_cpu()

commit dd976a97d15b47656991e185a94ef42a0fa5cfd4 upstream.

The smp_processor_id() shouldn't be called from preemptible code.
Instead use get_cpu() and put_cpu() which disables preemption in
addition to getting the processor id. Enable preemption back after
calling schedule_work() to make sure that the work gets scheduled on all
cores other than the current core. We want to avoid a scenario where
current core's stack trace is printed multiple times and one core's
stack trace isn't printed because of scheduling of current task.

This fixes the following bug:

[  119.143590] sysrq: Show backtrace of all active CPUs
[  119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873
[  119.144586] caller is debug_smp_processor_id+0x20/0x30
[  119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3
[  119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023
[  119.145053] Call trace:
[  119.145093]  dump_backtrace+0x0/0x1a0
[  119.145122]  show_stack+0x18/0x70
[  119.145141]  dump_stack+0xc4/0x11c
[  119.145159]  check_preemption_disabled+0x100/0x110
[  119.145175]  debug_smp_processor_id+0x20/0x30
[  119.145195]  sysrq_handle_showallcpus+0x20/0xc0
[  119.145211]  __handle_sysrq+0x8c/0x1a0
[  119.145227]  write_sysrq_trigger+0x94/0x12c
[  119.145247]  proc_reg_write+0xa8/0xe4
[  119.145266]  vfs_write+0xec/0x280
[  119.145282]  ksys_write+0x6c/0x100
[  119.145298]  __arm64_sys_write+0x20/0x30
[  119.145315]  el0_svc_common.constprop.0+0x78/0x1e4
[  119.145332]  do_el0_svc+0x24/0x8c
[  119.145348]  el0_svc+0x10/0x20
[  119.145364]  el0_sync_handler+0x134/0x140
[  119.145381]  el0_sync+0x180/0x1c0

Cc: jirislaby@kernel.org
Cc: stable@vger.kernel.org
Fixes: 47cab6a722d4 ("debug lockups: Improve lockup detection, fix generic arch fallback")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231009162021.3607632-1-usama.anjum@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: sysctl: prevent aliased sysctls from getting passed to init

commit 8001f49394e353f035306a45bcf504f06fca6355 upstream.

The code that checks for unknown boot options is unaware of the sysctl
alias facility, which maps bootparams to sysctl values.  If a user sets
an old value that has a valid alias, a message about an invalid
parameter will be printed during boot, and the parameter will get passed
to init.  Fix by checking for the existence of aliased parameters in the
unknown boot parameter code.  If an alias exists, don't return an error
or pass the value to init.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 0a477e1ae21b ("kernel/sysctl: support handling command line aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()

commit 969d90ec212bae4b45bf9d21d7daa30aa6cf055e upstream.

eBPF can end up calling into the audit code from some odd places, and
some of these places don't have @current set properly so we end up
tripping the `WARN_ON_ONCE(!current->mm)` near the top of
`audit_exe_compare()`. While the basic `!current->mm` check is good,
the `WARN_ON_ONCE()` results in some scary console messages so let's
drop that and just do the regular `!current->mm` check to avoid
problems.

Cc: <stable@vger.kernel.org>
Fixes: 47846d51348d ("audit: don't take task_lock() in audit_exe_compare() code path")
Reported-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: don't take task_lock() in audit_exe_compare() code path

commit 47846d51348dd62e5231a83be040981b17c955fa upstream.

The get_task_exe_file() function locks the given task with task_lock()
which when used inside audit_exe_compare() can cause deadlocks on
systems that generate audit records when the task_lock() is held. We
resolve this problem with two changes: ignoring those cases where the
task being audited is not the current task, and changing our approach
to obtaining the executable file struct to not require task_lock().

With the intent of the audit exe filter being to filter on audit events
generated by processes started by the specified executable, it makes
sense that we would only want to use the exe filter on audit records
associated with the currently executing process, e.g. @current. If
we are asked to filter records using a non-@current task_struct we can
safely ignore the exe filter without negatively impacting the admin's
expectations for the exe filter.

Knowing that we only have to worry about filtering the currently
executing task in audit_exe_compare() we can do away with the
task_lock() and call get_mm_exe_file() with @current->mm directly.

Cc: <stable@vger.kernel.org>
Fixes: 5efc244346f9 ("audit: fix exe_file access in audit_exe_compare")
Reported-by: Andreas Steinmetz <anstein99@googlemail.com>
Reviewed-by: John Johansen <john.johanse@canonical.com>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Clear bit12 of ICR after APIC-write VM-exit

commit 629d3698f6958ee6f8131ea324af794f973b12ac upstream.

When IPI virtualization is enabled, a WARN is triggered if bit12 of ICR
MSR is set after APIC-write VM-exit. The reason is kvm_apic_send_ipi()
thinks the APIC_ICR_BUSY bit should be cleared because KVM has no delay,
but kvm_apic_write_nodecode() doesn't clear the APIC_ICR_BUSY bit.

Under the x2APIC section, regarding ICR, the SDM says:

  It remains readable only to aid in debugging; however, software should
  not assume the value returned by reading the ICR is the last written
  value.

I.e. the guest is allowed to set bit 12.  However, the SDM also gives KVM
free reign to do whatever it wants with the bit, so long as KVM's behavior
doesn't confuse userspace or break KVM's ABI.

Clear bit 12 so that it reads back as '0'. This approach is safer than
"do nothing" and is consistent with the case where IPI virtualization is
disabled or not supported, i.e.,

  handle_fastpath_set_x2apic_icr_irqoff() -> kvm_x2apic_icr_write()

Opportunistically replace the TODO with a comment calling out that eating
the write is likely faster than a conditional branch around the busy bit.

Link: https://lore.kernel.org/all/ZPj6iF0Q7iynn62p@google.com/
Fixes: 5413bcba7ed5 ("KVM: x86: Add support for vICR APIC-write VM-Exits in x2APIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20230914055504.151365-1-tao1.su@linux.intel.com
[sean: tweak changelog, replace TODO with comment, drop local "val"]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Ignore MSR_AMD64_TW_CFG access

commit 2770d4722036d6bd24bcb78e9cd7f6e572077d03 upstream.

Hyper-V enabled Windows Server 2022 KVM VM cannot be started on Zen1 Ryzen
since it crashes at boot with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED +
STATUS_PRIVILEGED_INSTRUCTION (in other words, because of an unexpected #GP
in the guest kernel).

This is because Windows tries to set bit 8 in MSR_AMD64_TW_CFG and can't
handle receiving a #GP when doing so.

Give this MSR the same treatment that commit 2e32b7190641
("x86, kvm: Add MSR_AMD64_BU_CFG2 to the list of ignored MSRs") gave
MSR_AMD64_BU_CFG2 under justification that this MSR is baremetal-relevant
only.
Although apparently it was then needed for Linux guests, not Windows as in
this case.

With this change, the aforementioned guest setup is able to finish booting
successfully.

This issue can be reproduced either on a Summit Ridge Ryzen (with
just "-cpu host") or on a Naples EPYC (with "-cpu host,stepping=1" since
EPYC is ordinarily stepping 2).

Alternatively, userspace could solve the problem by using MSR filters, but
forcing every userspace to define a filter isn't very friendly and doesn't
add much, if any, value. The only potential hiccup is if one of these
"baremetal-only" MSRs ever requires actual emulation and/or has F/M/S
specific behavior. But if that happens, then KVM can still punt *that*
handling to userspace since userspace MSR filters "win" over KVM's default
handling.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1ce85d9c7c9e9632393816cf19c902e0a3f411f1.1697731406.git.maciej.szmigiero@oracle.com
[sean: call out MSR filtering alternative]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: hyper-v: Don't auto-enable stimer on write from user-space

commit d6800af51c76b6dae20e6023bbdc9b3da3ab5121 upstream.

Don't apply the stimer's counter side effects when modifying its
value from user-space, as this may trigger spurious interrupts.

For example:
- The stimer is configured in auto-enable mode.
- The stimer's count is set and the timer enabled.
- The stimer expires, an interrupt is injected.
- The VM is live migrated.
- The stimer config and count are deserialized, auto-enable is ON, the
stimer is re-enabled.
- The stimer expires right away, and injects an unwarranted interrupt.

Cc: stable@vger.kernel.org
Fixes: 1f4b34f825e8 ("kvm/x86: Hyper-V SynIC timers")
Signed-off-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231017155101.40677-1-nsaenz@amazon.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu/hygon: Fix the CPU topology evaluation for real

commit ee545b94d39a00c93dc98b1dbcbcf731d2eadeb4 upstream.

Hygon processors with a model ID > 3 have CPUID leaf 0xB correctly
populated and don't need the fixed package ID shift workaround. The fixup
is also incorrect when running in a guest.

Fixes: e0ceeae708ce ("x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors")
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_594804A808BD93A4EBF50A994F228E3A7F07@qq.com
Link: https://lore.kernel.org/r/20230814085112.089607918@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: x86/sha - load modules based on CPU features

commit 1c43c0f1f84aa59dfc98ce66f0a67b2922aa7f9d upstream.

x86 optimized crypto modules are built as modules rather than build-in and
they are not loaded when the crypto API is initialized, resulting in the
generic builtin module (sha1-generic) being used instead.

It was discovered when creating a sha1/sha256 checksum of a 2Gb file by
using kcapi-tools because it would take significantly longer than creating
a sha512 checksum of the same file. trace-cmd showed that for sha1/256 the
generic module was used, whereas for sha512 the optimized module was used
instead.

Add module aliases() for these x86 optimized crypto modules based on CPU
feature bits so udev gets a chance to load them later in the boot
process. This resulted in ~3x decrease in the real-time execution of
kcapi-dsg.

Fix is inspired from commit
aa031b8f702e ("crypto: x86/sha512 - load based on CPU features")
where a similar fix was done for sha512.

Cc: stable@vger.kernel.org # 5.15+
Suggested-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Suggested-by: Julian Andres Klode <julian.klode@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix system crash due to bad pointer access

commit 19597cad64d608aa8ac2f8aef50a50187a565223 upstream.

User experiences system crash when running AER error injection.  The
perturbation causes the abort-all-I/O path to trigger. The driver assumes
all I/O on this path is FCP only. If there is both NVMe & FCP traffic, a
system crash happens. Add additional check to see if I/O is FCP or not
before access.

PID: 999019  TASK: ff35d769f24722c0  CPU: 53  COMMAND: "kworker/53:1"
0 [ff3f78b964847b58] machine_kexec at ffffffffae86973d
1 [ff3f78b964847ba8] __crash_kexec at ffffffffae9be29d
2 [ff3f78b964847c70] crash_kexec at ffffffffae9bf528
3 [ff3f78b964847c78] oops_end at ffffffffae8282ab
4 [ff3f78b964847c98] exc_page_fault at ffffffffaf2da502
5 [ff3f78b964847cc0] asm_exc_page_fault at ffffffffaf400b62
   [exception RIP: qla2x00_abort_srb+444]
   RIP: ffffffffc07b5f8c  RSP: ff3f78b964847d78  RFLAGS: 00010046
   RAX: 0000000000000282  RBX: ff35d74a0195a200  RCX: ff35d76886fd03a0
   RDX: 0000000000000001  RSI: ffffffffc07c5ec8  RDI: ff35d74a0195a200
   RBP: ff35d76913d22080   R8: ff35d7694d103200   R9: ff35d7694d103200
   R10: 0000000100000000  R11: ffffffffb05d6630  R12: 0000000000010000
   R13: ff3f78b964847df8  R14: ff35d768d8754000  R15: ff35d768877248e0
   ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
6 [ff3f78b964847d70] qla2x00_abort_srb at ffffffffc07b5f84 [qla2xxx]
7 [ff3f78b964847de0] __qla2x00_abort_all_cmds at ffffffffc07b6238 [qla2xxx]
8 [ff3f78b964847e38] qla2x00_abort_all_cmds at ffffffffc07ba635 [qla2xxx]
9 [ff3f78b964847e58] qla2x00_terminate_rport_io at ffffffffc08145eb [qla2xxx]
10 [ff3f78b964847e70] fc_terminate_rport_io at ffffffffc045987e [scsi_transport_fc]
11 [ff3f78b964847e88] process_one_work at ffffffffae914f15
12 [ff3f78b964847ed0] worker_thread at ffffffffae9154c0
13 [ff3f78b964847f10] kthread at ffffffffae91c456
14 [ff3f78b964847f50] ret_from_fork at ffffffffae8036ef

Cc: stable@vger.kernel.org
Fixes: f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20231030064912.37912-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: Increase register read retry rount from 3 to 30 for selected registers

commit 8e3ed9e786511ad800c33605ed904b9de49323cf upstream.

In BMC environments with concurrent access to multiple registers, certain
registers occasionally yield a value of 0 even after 3 retries due to
hardware errata. As a fix, we have extended the retry count from 3 to 30.

The same errata applies to the mpt3sas driver, and a similar patch has
been accepted. Please find more details in the mpt3sas patch reference
link.

Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Fixes: 272652fcbf1a ("scsi: megaraid_sas: add retry logic in megasas_readl")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231003110021.168862-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Fix loop logic

commit 3c978492c333f0c08248a8d51cecbe5eb5f617c9 upstream.

The retry loop continues to iterate until the count reaches 30, even after
receiving the correct value. Exit loop when a non-zero value is read.

Fixes: 4ca10f3e3174 ("scsi: mpt3sas: Perform additional retries if doorbell read returns 0")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20231020105849.6350-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END

commit 291d044fd51f8484066300ee42afecf8c8db7b3a upstream.

BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.

backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.

While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).

Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix check_stack_write_fixed_off() to correctly spill imm

commit 811c363645b33e6e22658634329e95f383dfc705 upstream.

In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.

For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0  = 0
7: exit

The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10                      ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44        ; R2_w=fp0 fp-40_w=4294967252
2: (79) r0 = *(u64 *)(r2 -40)         ; R0_w=4294967252 R2_w=fp0
fp-40_w=4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=4294967252
4: (b7) r0 = 1                        ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.

Fixes: ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-1-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

randstruct: Fix gcc-plugin performance mode to stay in group

commit 381fdb73d1e2a48244de7260550e453d1003bb8e upstream.

The performance mode of the gcc-plugin randstruct was shuffling struct
members outside of the cache-line groups. Limit the range to the
specified group indexes.

Cc: linux-hardening@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-by: Lukas Loidolt <e1634039@student.tuwien.ac.at>
Closes: https://lore.kernel.org/all/f3ca77f0-e414-4065-83a5-ae4c4d25545d@student.tuwien.ac.at
Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix disabling BHRB and instruction sampling

commit ea142e590aec55ba40c5affb4d49e68c713c63dc upstream.

When the PMU is disabled, MMCRA is not updated to disable BHRB and
instruction sampling. This can lead to those features remaining enabled,
which can slow down a real or emulated CPU.

Fixes: 1cade527f6e9 ("powerpc/perf: BHRB control to disable BHRB logic when not used")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231018153423.298373-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix async branch flags

commit f2d87895cbc4af80649850dcf5da36de6b2ed3dd upstream.

Ensure PERF_IP_FLAG_ASYNC is set always for asynchronous branches (i.e.
interrupts etc).

Fixes: 90e457f7be08 ("perf tools: Add Intel PT support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230928072953.19369-1-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi: add checks to perform sanity on queue pointers

commit 5e538fce33589da6d7cb2de1445b84d3a8a692f7 upstream.

Read and write pointers are used to track the packet index in the memory
shared between video driver and firmware. There is a possibility of OOB
access if the read or write pointer goes beyond the queue memory size.
Add checks for the read and write pointer to avoid OOB access.

Cc: stable@vger.kernel.org
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i915/perf: Fix NULL deref bugs with drm_dbg() calls

commit 471aa951bf1206d3c10d0daa67005b8e4db4ff83 upstream.

When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.

As returning -ENOTSUPP is pretty clear return when perf interface is not
available.

Fixes: 2fec539112e8 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix check of rc in function generate_smb3signingkey

[ Upstream commit 181724fc72486dec2bec8803459be05b5162aaa8 ]

Remove extra check after condition, add check after generating key
for encryption. The check is needed to return non zero rc before
rewriting it with generating key for decryption.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: d70e9fa55884 ("cifs: try opening channels after mounting")
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Co-developed-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>