ASoC: rt715: Add power-up delay to fix dmic pop sound issue.

Add 400ms power-up delay recommended to fix pop noise on capture.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200925210509.83353-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: sgtl5000: Add common clock properties

Add common properties appearing in DTSes (assigned-clocks and similar)
to fix dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dt.yaml: audio-codec@a:
    'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200925212719.23286-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: q6afe-clocks: Fix typo in SPDX Licence

Looks like there was a major typo in SPDX Licence version,
Not sure how it was missed.
This patch is to fix it.

Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200926171844.7792-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "Enable runtime PM for SOF device" from Daniel Baluta <daniel.baluta@oss.nxp.com>
Daniel Baluta <daniel.baluta@nxp.com>:

From: Daniel Baluta <daniel.baluta@nxp.com>

This enables runtime PM for SOF device. Next patchseries will
provide PM suspend/resume handlers for i.MX8 specific devices.

Daniel Baluta (2):
  ASoC: SOF: Activate runtime PM with SOF OF device
  ASoC: SOF: Add .prepare/.complete callbacks

 sound/soc/sof/sof-of-dev.c | 6 ++++++
 1 file changed, 6 insertions(+)

--
2.17.1

Merge series "ASoC: qdsp6: fix some warnings when build without CONFIG_OF" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

Here are fixes for two warnings types discovered while building qdsp6 drivers
without CONFIG_OF and with W=1

One of them was reported by Intel kernel test robot on q6afe-clocks patch, which
equally applies to rest of the qdsp6 drivers.

changes since v1:
- added ifdef CONFIG_OF instead of removing of_match_ptr

Srinivas Kandagatla (2):
  ASoC: qdsp6: add ifdef CONFIG_OF around of_device_id
  ASoC: q6asm: fix kernel doc warnings

 sound/soc/qcom/qdsp6/q6adm.c        | 2 ++
 sound/soc/qcom/qdsp6/q6afe-clocks.c | 2 ++
 sound/soc/qcom/qdsp6/q6afe-dai.c    | 2 ++
 sound/soc/qcom/qdsp6/q6afe.c        | 2 ++
 sound/soc/qcom/qdsp6/q6asm-dai.c    | 2 ++
 sound/soc/qcom/qdsp6/q6asm.c        | 6 ++++++
 sound/soc/qcom/qdsp6/q6core.c       | 2 ++
 sound/soc/qcom/qdsp6/q6routing.c    | 2 ++
 8 files changed, 20 insertions(+)

--
2.21.0

ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together

Update lpass-cpu.c to enable I2S BCLK and LRCLK together.
Remove BCLK enable in lpass_cpu_daiops_startup and
add in lpass_cpu_daiops_trigger API.

Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1600448073-6709-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: imx-audmix: Use devm_kcalloc() instead of devm_kzalloc()

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200921015918.24157-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: tas2770: Mark ti,asi-format to deprecated

Mark the property ti,asi-format to deprecated as it is no longer
supported.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200924142641.12355-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add .prepare/.complete callbacks

Use SOF defined callbacks (snd_sof_prepare/snd_sof_complete)
in order to update internal SOF system suspend target.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200924151518.15841-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Activate runtime PM with SOF OF device

SOF boots the DSP at probe and keeps it up all the time.
With this change, after booting if no one is using the DSP
the SOF core will turn off the DSP to save power.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200924151518.15841-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: q6asm: fix kernel doc warnings

This patch fixes below kernel doc warnings on not describing all the parmeters

sound/soc/qcom/qdsp6/q6asm.c:927: warning: Function parameter or member
 'stream_id' not described in 'q6asm_open_write'
sound/soc/qcom/qdsp6/q6asm.c:927: warning: Function parameter or member
 'is_gapless' not described in 'q6asm_open_write'
sound/soc/qcom/qdsp6/q6asm.c:1053: warning: Function parameter or member
 'stream_id' not described in 'q6asm_run'

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925163552.20717-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: add ifdef CONFIG_OF around of_device_id

Add ifdef CONFIG_OF around of_device_id table to fix below
W=1 compile test warning with !CONFIG_OF:

sound/soc/qcom/qdsp6/q6afe-clocks.c:254:34: warning: unused variable
 'q6afe_clock_device_id' [-Wunused-const-variable]

Fix this warning for across all qdsp6 drivers.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925163552.20717-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: sdw machine driver updates for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Series including fixes and improvements for Intel SoundWire
machine drivers.

Bard Liao (1):
  ASoC: Intel: add support for new SoundWire hardware layout on TGL

Pierre-Louis Bossart (4):
  ASoC: Intel: sof_sdw: remove ternary operator
  ASoC: Intel: add codec name prefix to ACPI machine description
  ASoC: Intel: sof_sdw: remove hard-coded codec_conf table
  ASoC: Intel: sof_sdw_rt700: add codec prefix

Rander Wang (1):
  ASOC: Intel: sof_sdw: restore playback functionality with max98373
    amps

 include/sound/soc-acpi.h                      |   2 +
 sound/soc/intel/boards/sof_sdw.c              | 170 +++++++++---------
 sound/soc/intel/boards/sof_sdw_common.h       |   3 +
 sound/soc/intel/boards/sof_sdw_max98373.c     |  36 +++-
 sound/soc/intel/boards/sof_sdw_rt700.c        |   6 +-
 .../intel/common/soc-acpi-intel-cml-match.c   |  10 ++
 .../intel/common/soc-acpi-intel-cnl-match.c   |   1 +
 .../intel/common/soc-acpi-intel-icl-match.c   |   6 +
 .../intel/common/soc-acpi-intel-tgl-match.c   |  67 +++++++
 9 files changed, 216 insertions(+), 85 deletions(-)

--
2.27.0

ASoC: tas2770: Remove unused variables

Remove unused variables in the private struct and the code as these
variables are initially set and then there is no additional code
utilizing these variables.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200923132600.10652-6-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Remove ti,asi-format code

Remove the code to support the asi-format binding property. The code
does nothing except read the property and set a variable. No additional
action is taken except to reset the variable. The property is supposed
to set the rising or falling RX edge detection of the SBCLK but this
edge detection is done by checking the DAI_FMT_INV_MASK.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200923132600.10652-5-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Set regcache when shutting down and waking device

Set the regcache to cache data and mark cache as dirty when the device
is shutdown when suspend is called. When the device is woken up then
sync the cache and set to not caching the data.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200923132600.10652-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Add shutdown capability via a GPIO

Add the hardware shutdown mechanism to shutdown and wake up the device
via a GPIO.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200923132600.10652-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: tas2770: Add shutdown gpio property

Add the shutdown-gpios property to the yaml to define the GPIO that can
be used to place the device in shutdown mode or wake the device up.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200923132600.10652-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hda_dsp_common: use static function in conditional block

cppcheck reports the following warning:

sound/soc/intel/boards/hda_dsp_common.c:17:0: style: The function
'hda_dsp_hdmi_pcm_handle' is never used. [unusedFunction]

Fix by moving to static inside compilation block.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923072939.3100468-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASOC: Intel: sof_sdw: restore playback functionality with max98373 amps

The Max98373 amplifier provides I/V feedback information, which keeps
a DAPM path active even when there is no playback happening. This
prevents entry in low-power mode. Rather than adding new controls and
require UCM/user interaction, the method previously applied is to
enable/disable the Speaker pin during the dailink trigger operations.

Recent changes in the SoundWire stream management moved the stream
trigger to the dailink trigger. This change removed the Maxim-specific
pin handling and resulted in a regression. This patch restores
functionality by combining the SoundWire stream trigger with the pin
enable/disable.

Fixes: ae3a3918edf57 ('ASoC: Intel: sof_sdw: add dailink .trigger callback')
Fixes: 06998d49bcac8 ('ASoC: Intel: sof_sdw: add dailink .prepare and .hw_free callback')
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: add support for new SoundWire hardware layout on TGL

The creativity of hardware folks is endless, with a complete
permutation of rt711 (was link0 now link1), rt1308 (was link1 now
link2) and rt715 (was link3 now link0).

Someday we will get all this information from platform firmware, for
now let's add the mapping table.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw_rt700: add codec prefix

Somehow for this codec we never used any prefix for the controls,
likely because the test platform has a single SoundWire device.

Follow the convention and use the codec prefix across the board to
avoid possible conflicts.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: remove hard-coded codec_conf table

Now that the ACPI machine params provide all the information needed,
allocate the card codec_conf dynamically and set .dlc and
.prefix_name.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: add codec name prefix to ACPI machine description

The current SOF machine driver adds a name prefix for each codec,
mainly to differentiate ALSA controls for left and right amplifiers.

This is a good idea, but the machine driver duplicates some of the
information that already exists in ACPI descriptors, so add those
prefixes there. Follow-up patches will make use of the information
encoded in these tables and remove duplication.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: remove ternary operator

cppcheck reports the following warning:

sound/soc/intel/boards/sof_sdw.c:866:46: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
 hdmi_num = sof_sdw_quirk & SOF_SDW_TGL_HDMI ?
                                             ^

There's no reason to use the ternary operator here, we might as well
use a regular if-else construct.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cros_ec_codec: fix kconfig dependency warning for SND_SOC_CROS_EC_CODEC

When SND_SOC_CROS_EC_CODEC is enabled and CRYPTO is disabled, it results
in the following Kbuild warning:

WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - SND_SOC_CROS_EC_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && CROS_EC [=y]

The reason is that SND_SOC_CROS_EC_CODEC selects CRYPTO_LIB_SHA256 without
depending on or selecting CRYPTO while CRYPTO_LIB_SHA256 is subordinate to
CRYPTO.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes: 93fa0af4790a ("ASoC: cros_ec_codec: switch to library API for SHA-256")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200917141803.92889-1-fazilyildiran@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2562: Remove duplicate code for I/V sense

Remove duplicate code for programming the I/V sense the call to update
the register was duplicated in commit 09ed395b05feb ("ASoC: tas2562:
Add voltage sense slot configuration").

Fixes: 09ed395b05feb ("ASoC: tas2562: Add voltage sense slot configuration")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200922142411.10364-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: hdmi-codec: Use set_jack ops to set jack

Use set_jack ops to set jack so machine drivers do not need to include
hdmi-codec.h explicitly.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200922062316.1172935-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: SOF: fix kcontrol size checks" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Series that fixes checks for 'size' in kcontrol get/put ext_bytes methods
for SOF. The gaps in these checks were discovered via cppcheck warnings
on unused variable values.

Pierre-Louis Bossart (5):
  ASoC: SOF: control: fix size checks for ext_bytes control .get()
  ASoC: SOF: control: fix size checks for volatile ext_bytes control
    .get()
  ASoC: SOF: control: add size checks for ext_bytes control .put()
  ASoC: SOF: control: remove const in sizeof()
  ASoC: SOF: topology: remove const in sizeof()

 sound/soc/sof/control.c  | 53 +++++++++++++++++++++++++++++++---------
 sound/soc/sof/topology.c |  2 +-
 2 files changed, 43 insertions(+), 12 deletions(-)

--
2.27.0

ASoC: hdac: make SOF HDA codec driver probe deterministic

To provide backward compatibility to older systems, the SOF HDA driver
allows user to specify which HDMI codec driver to use at runtime via
kernel parameter. This mechanism has a subtle flaw in that it assumes
the codec drivers not to be loaded when the SOF PCI driver is loaded.

The problem is rooted in use of the hdev->type field.
snd_hdac_ext_bus_device_init() initializes this field to HDA_DEV_ASOC.
This signals the HDA core that ASoC drivers should be considered in
driver matching (hda_bus_match()). The SOF and SST drivers continue by
overriding this field to HDA_DEV_LEGACY and proceeding to load driver
modules with request_module(). Correct drivers will get loaded and
attached.

If however the codec drivers are already loaded when
snd_hdac_ext_bus_device_init() is called, the matching will not work as
expected as device type is still set to HDA_DEV_ASOC. Specifically if
hdac-hdmi is attached when machine driver is configured to use hdac-hda,
this leads to out-of-bounds memory access in
hda_dsp_hdmi_build_controls().

Fix the issue by adding codec type as a parameter to
snd_hdac_ext_bus_device_init() and ensuring type is set correctly from
the start.

Fixes: 139c7febad1a ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921100841.2882662-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Refactor sample rate function

Refactor the tas2770_set_samplerate to simplify the code and access the
I2C bus only once per rate request. The ramp rate and sample rate bits
are contained in the same register so a single call to the
snd_soc_update_bits function is all that is needed

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-9-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Fix the spacing and new lines

Fix up the spacing for argument alignment and add new lines to separate
code. Eliminate unneccessary goto statements when the error code could
just be returned.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-8-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Convert bit mask to GENMASK in header

Update the hardcoded masks with the GENMASK macro. Also update some of
the hardcoded bits with the BIT macro

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-6-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Fix unbalanced calls to pm_runtime

Fix the unbalanced call to the pm_runtime_disable when removing the
module.  pm_runtime_enable is not called nor is the pm_runtime setup in
the code.  Remove the i2c_remove function and the pm_runtime_disable.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-5-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: tas2770: Fix I2C addresses for the TAS2770

The I2C addresses listed in the yaml are not correct. The addresses can
range from 0x41 through 0x48 based on register configurations. Fix the
example and the description.

Fixes: 4b7151dadfd4 ("dt-bindings: ASoC: Add tas2770 smart PA dt bindings")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2562: Add the TAS2110 class-D amplifier

Add the TAS2110 amplifier to the TAS2562 driver. The TAS2110 is register
and bitmap compatible. The chips differ in that the TAS2110 does not
have the I/V Sense feedback path. Since these features do not exist the
device needs to be registered without these controls.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200921153820.18357-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: tas2562: Add the TAS2110 amplifier

Add the TAS2110 amplifier compatible.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200921153820.18357-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: control: add size checks for ext_bytes control .put()

Make sure the TLV header and size are consistent before copying from
userspace.

Fixes: c3078f5397046 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: control: fix size checks for volatile ext_bytes control .get()

Mirror addition of checks for regular ext_bytes controls.

Fixes: 783560d02dd61 ('ASoC: SOF: Implement snd_sof_bytes_ext_volatile_get kcontrol IO')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: control: fix size checks for ext_bytes control .get()

cppcheck complains twice:

sound/soc/sof/control.c:436:2: style: Assignment of function parameter
has no effect outside the function. [uselessAssignmentArg]
 size -= sizeof(const struct snd_ctl_tlv);
 ^

sound/soc/sof/control.c:436:7: style: Variable 'size' is assigned a
value that is never used. [unreadVariable]
 size -= sizeof(const struct snd_ctl_tlv);

Somehow we dropped the checks for the size argument when upstreaming
the code, somewhere between v5 and v6.

Re-add a size check to avoid providing userspace with more data that
it asked for.

Also fix all error codes, we should return -ENOSPC instead of -EINVAL.

Fixes: c3078f5397046 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'asoc-5.9' into asoc-5.10

ASoC: tlv320aic32x4: Enable fast charge

At power-up the analog circuits may take up to one full second before
being charged with the default configuration. Using the analog blocks
before they are ready generates a *very* crappy sound.

Enable the fast charge feature, which will require a bit more power
than normal charge but will definitely speed up the starting operation
by shrinking this delay to up to 40 ms.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20200911173140.29984-4-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320aic32x4: Fix bdiv clock rate derivation

Current code expects a single channel to be always used. Fix this
situation by forwarding the number of channels used. Then fix the
derivation of the bdiv clock rate.

Fixes: 96c3bb00239d ("ASoC: tlv320aic32x4: Dynamically Determine Clocking")
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20200911173140.29984-3-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320aic32x4: Ensure a minimum delay before clock stabilization

As indicated in the datasheet, a 10ms delay must be observed after
programming the divisors.

The lack of delay prevents the codec to work properly and the playback
appears extremely slow and totally un-audible on a custom sama5 based
board.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20200911173140.29984-2-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711: wait for the delayed work to finish when the system suspends

To avoid the IO error, we need to cancel the delayed work and wait for it to finish.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921094308.31921-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Fix error handling with update_bits

snd_soc_update_bits returns a 1 when the bit was successfully updated,
returns a 0 is no update was needed and a negative if the call failed.
The code is currently failing the case of a successful update by just
checking for a non-zero number. Modify these checks and return the error
code only if there is a negative.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-7-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Fix required DT properties in the code

The devicetree binding indicates that the ti,asi-format, ti,imon-slot-no
and ti,vmon-slot-no are not required but the driver requires them or it
fails to probe. Honor the binding and allow these entries to be optional
and set the corresponding values to the default values for each as defined
in the data sheet.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-4-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Add missing bias level power states

Add the BIAS_STANDBY and BIAS_PREPARE to the set_bias_level or else the
driver will return -EINVAL which is not correct as they are valid
states.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2770: Fix calling reset in probe

tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt700: wait for the delayed work to finish when the system suspends

To avoid the IO error, we need to cancel the delayed work and wait for it to finish.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921094244.31869-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2562: Add the TAS2564 compatible

Add the TAS2564 as a supported amplifier.  This amplifier is register,
bitmap and feature compatible to the TAS2562.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918150130.21015-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: tas2562: Add TAS2564 to binding

Add the TAS2564 compatible and data sheet link to the binding.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918150130.21015-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: imx: add missing MODULE_LICENSE() for imx-common

Fix build warning:
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/sof/imx/imx-common.o

Fixes: 18ebffe4d043 ("ASoC: SOF: imx: Add debug support for imx platforms")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921104746.2903507-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pm: Fix prepare callback behavior for OF usecase

On i.MX platforms PM is not managed via ACPI although CONFIG_ACPI
can be set. So, in order to correctly set the system target state
we introduce a flag for platforms that require to use acpi target
states.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921105038.2909899-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs42l51: add additional ADC volume controls

Add volume controls for:
- Analog programmable gain amplifier (PGA) (-3 .. +12 dB)
- ADC attenuator (0 .. -96 dB)

Signed-off-by: Guillermo Rodríguez <guille.rodriguez@gmail.com>
Acked-by: David Rhodes <David.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20200918134317.22574-1-guille.rodriguez@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: topology: fix the process being scheduled on core0 always

In commit 783898ce68de ("ASoC: SOF: append extended data to
sof_ipc_comp_process") the process components are set to run on the
fixed core 0, this break us from scheduling components on any other DSP
core.

Since we can get the DSP core index from swidget->core, it is duplicated
to pass the extra 'core' argument for those sof_widget_load_xx()
functions.

Here removes the duplicate 'core' argument and get component core from
swidget->core directly to fix the issue mentioned above.

Fixes: 783898ce68de ("ASoC: SOF: append extended data to sof_ipc_comp_process")
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921104544.2897112-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adcx140: Add support for configuring GPIO pin

Add support to configure the GPIO pin to the specific configuration.
The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN,
GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output
drive can be configured with various configuration.

Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20200918114025.18205-2-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: tlv320adcx140: Add GPIO config and drive config

Add properties for configuring the General Purpose Input Output (GPIO).
There are 2 settings for GPIO, configuration and the output drive type.

Signed-off-by: Camel Guo <camelg@axis.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918114025.18205-1-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: fsl_sai: update the register list" from Shengjiu Wang <shengjiu.wang@nxp.com>:

As sai ip is upgraded, so update sai register list.

Shengjiu Wang (3):
  ASoC: fsl_sai: Add new added registers and new bit definition
  ASoC: fsl_sai: Add fsl_sai_check_version function
  ASoC: fsl_sai: Set MCLK input or output direction

changes in v2:
- update commit message for first commit
- Add acked-by Nicolin

 sound/soc/fsl/fsl_sai.c | 77 ++++++++++++++++++++++++++++++++++++
 sound/soc/fsl/fsl_sai.h | 87 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 164 insertions(+)

--
2.27.0

Merge series "ASoC: SOF: small fixes for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Series that adds debug support for IMX platforms, more details to
FW version information, adds missing -EACCESS handling to
pm_runtime_get_sync() calls and a set of minor cosmetic, trace
verbosity and coding style issues.

Guennadi Liakhovetski (3):
  ASoC: SOF: (cosmetic) remove redundant "ret" variable uses
  ASoC: SOF: remove several superfluous type-casts
  ASoC: SOF: fix range checks

Iulian Olaru (1):
  ASoC: SOF: imx: Add debug support for imx platforms

Karol Trzcinski (1):
  ASoC: SOF: Add `src_hash` to `sof_ipc_fw_version` structure

Pierre-Louis Bossart (3):
  ASoC: SOF: debug: update test for pm_runtime_get_sync()
  ASoC: SOF: control: update test for pm_runtime_get_sync()
  ASoC: SOF: Intel: hda: reduce verbosity of boot error logs

 include/sound/sof/info.h         |  4 +-
 sound/soc/sof/control.c          | 62 +++++++++++++--------------
 sound/soc/sof/debug.c            |  2 +-
 sound/soc/sof/imx/Kconfig        |  8 ++++
 sound/soc/sof/imx/Makefile       |  3 ++
 sound/soc/sof/imx/imx-common.c   | 72 ++++++++++++++++++++++++++++++++
 sound/soc/sof/imx/imx-common.h   | 16 +++++++
 sound/soc/sof/imx/imx8.c         | 23 +++++++++-
 sound/soc/sof/imx/imx8m.c        | 17 +++++++-
 sound/soc/sof/intel/hda-loader.c | 16 +++----
 sound/soc/sof/intel/hda.c        | 12 ++++--
 sound/soc/sof/intel/hda.h        |  2 +
 sound/soc/sof/sof-audio.c        |  6 +--
 sound/soc/sof/sof-priv.h         |  8 ++++
 sound/soc/sof/topology.c         | 44 ++++++++++---------
 15 files changed, 226 insertions(+), 69 deletions(-)
 create mode 100644 sound/soc/sof/imx/imx-common.c
 create mode 100644 sound/soc/sof/imx/imx-common.h

--
2.27.0

Merge series "ASoC: q6afe: add clocks support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

q6afe already exposes clocks using apis, but not as proper
clock controller driver. This patch puts those clocks
in to a proper clock controller so that other drivers that
depend on those clocks can be properly expressed.

Srinivas Kandagatla (2):
  ASoC: q6afe: dt-bindings: add q6afe clock bindings
  ASoC: q6afe-clocks: add q6afe clock controller

 .../devicetree/bindings/sound/qcom,q6afe.txt  |  23 ++
 include/dt-bindings/sound/qcom,q6afe.h        |  74 ++++-
 sound/soc/qcom/Kconfig                        |   4 +
 sound/soc/qcom/qdsp6/Makefile                 |   1 +
 sound/soc/qcom/qdsp6/q6afe-clocks.c           | 270 ++++++++++++++++++
 5 files changed, 371 insertions(+), 1 deletion(-)
 create mode 100644 sound/soc/qcom/qdsp6/q6afe-clocks.c

--
2.21.0

ASoC: ak4458: Add DSD support for ak4458 and ak4497

Ak4458 can't support DSD512 format, but ak4497 can, so add
a new enum variable (enum ak4458_type) in ak4458_drvdata to
distinguish these two platforms.

Ak4497 has two kinds of DSD input pin, it can be selected by
the dsd-path property from DT.

In hw_params(), bit clock is calculated according to different
DSD format (DSD64, DSD128, DSD256, DSD512), then registers
are configured.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1600178220-28973-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: ak4458: Add dsd-path property

Add "dsd-path" property, which is used for ak4497 codec
to select the DSD input pin.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1600178220-28973-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adcx140: Add ASI Tx drive

Add a property to indicate if the device is to go into a High-z state on
the Tx ASI output pins when the device is idle.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adcx140: Add the config to configure Tx ASI output

Add code to allow the ASI Tx output to be placed into High-z mode
during unused ASI cycles.  This allows for other devices that may be on
the bus to drive the ASI out. By default the 320adcx140 sends 0's for
unused cycles.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-4-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: lpass-sc7180: Add MODULE_DEVICE_TABLE

The lpass-sc7180 driver can be built as a module but is lacking a
MODULE_DEVICE_TABLE.  This means it won't auto-load.  Fix this
oversight.

Fixes: 24caf8d9eb10 ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200916111545.1.I4c3758817d94c433bafeac344a395e21ea6657e3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: Add support for tgl-h

SOF will support tgl-h and tgl-lp in different FW binaries due to
hardware difference, so create another dev_desc entry with FW name
of sof-tgl-h.ri and dsp_desc named tglh_chip_info for tgl-h.

Fixes: c8d2e2bfaeffa ("ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917103609.2559916-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec: tlv320aic32x4: do software reset before clock registration

To avoid the actual PLL settings to differ from the state expected by
the clock driver, the codec should only be fully reset before the clocks
are registered. But we also need to ensure that the software reset
happens at all before clock registration, as not all boards have a reset
GPIO.

Move the software reset from aic32x4_component_probe() to
aic32x4_probe() and reorder the reset and registration sequence:

1. Reset via GPIO (if available)
2. Reset via software
3. Register component
4. Register clocks

Note that aic32x4_component_probe() is only called after aic32x4_probe()
has finished, so the reset in aic32x4_component_probe() was happening too
late.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20200902133043.19504-2-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec: tlv320aic32x4: fix missing aic32x4_disable_regulators() in error path

The regulators need to be disabled in the aic32x4_register_clocks()
failure case as well.

Fixes: 9d4befff5a95 ("ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20200902133043.19504-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Correct interrupt flags in examples

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted some
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200908145954.4629-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: aries-wm8994: Match compatibles with enum

The common pattern for enumerating compatibles is enum, not oneOf.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200902160025.20922-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'asoc-5.9' into asoc-5.10

ASoC: fsl_sai: Set MCLK input or output direction

SAI support select MCLK direction with version.major > 3
and version.minor > 1, the default direction is input,
set it to be output according to DT property.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1600323079-5317-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Add fsl_sai_check_version function

fsl_sai_check_version can help to parse the version info
in VERID and PARAM registers.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1600323079-5317-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Add new added registers and new bit definition

On i.MX8MQ/i.MX8MN/i.MX8MM platform, the sai IP is upgraded.
There are some new registers and new bit definition. This
patch is to complete the register list.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1600323079-5317-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: q6afe-clocks: add q6afe clock controller

q6afe already exposes lpass clocks, however this was not presented
as proper clock controller driver. This patch basically adds clock
controller support for q6afe clocks.

This is useful for other drivers like lpass digital codec or lpass
lowpower island drivers to request or vote for these clocks.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910135708.14842-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: q6afe: dt-bindings: add q6afe clock bindings

q6afe exposes various lpass clocks controls via q6dsp q6afe commands.
This patch adds bindings required for this clock controller.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910135708.14842-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: reduce verbosity of boot error logs

Previous commits reduced the verbosity of errors during boot
iterations, but there are still a couple remaining which generate
false positives. Errors should only be logged when after last attempt
to download firmware failed.

Duplicating logs and assigning them different levels based on the
iteration number isn't really elegant, use macro as suggested by
Guennadi.

Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: fix range checks

On multiple locations checks are performed of untrusted values after adding
a constant to them. This is wrong, because the addition might overflow and
the result can then pass the check, although the original value is invalid.
Fix multiple such issues by checking the actual value and not a sum of it
and a constant.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: remove several superfluous type-casts

No need to type-cast assignments between void and other pointers in C.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: (cosmetic) remove redundant "ret" variable uses

In some cases no "ret" variable is even needed, those functions always
return 0 anyway, in other cases "ret" initialisation is redundant.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: control: update test for pm_runtime_get_sync()

We need to avoid reporting an error for -EACCESS when pm_runtime is
not enabled.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: debug: update test for pm_runtime_get_sync()

We need to avoid reporting an error for -EACCESS when pm_runtime is
not enabled.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add `src_hash` to `sof_ipc_fw_version` structure

This field will be used to compare ldc file with loaded fw version,
to assert validity of trace logs. Value used in sof-logger.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: imx: Add debug support for imx platforms

This patch adds debug support for imx platforms. This is important in
order to gather information about the state of the DSP in case of an
oops and the reason for the oops.

This is done by checking if a message with a panic code has been placed
in the debug box, in the imx8_dsp_handle_request function from sof/imx.

If positive, the function imx8_dump, added in common, will be called.
The first step is to gather information about the registers, filename,
line number and stack by calling the imx8_get_registers, added in common.
Then the information will be printed to the console by calling the
get_status function.

Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adcx140: Fix BCLK inversion for DSP modes

Fix the BCLK inversion for DSP modes
This is how it is defined by ASoC:
 * BCLK:
 * - "normal" polarity means signal is available at rising edge of BCLK
 * - "inverted" polarity means signal is available at falling edge of BCLK

The adcx140 defines the BCLK edge based on coding type.
The PCM (DSP_A/B) should drive on rising and sample on falling edge, so
from ASoC pov, it is IB_NF. But from the codec pov if it is configured in
DSP mode, then the BCLK should not be inverted, defaults to the coding
standard.

For i2s, it is NB_NF from ASoC pov (drive on falling, sample on rising).
>From the codec's pov BCLK should not invert either, as this is the default
for the coding.

So, inversion must take the format into account:
IB_NF + DSP_A/B == the codec bclk inversion should be disabled
NB_NF + DSP_A/B == the codec bclk inversion should be enabled
NB_NF + I2S == the codec bclk inversion should be disabled

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adcx140: Idle the device while writing registers

It was observed that if the device was active and register writes were
performed there were some unwanted behaviors particularly when writing
the word length and some filter options. So when writing to the device
the device should be placed in sleep mode and then exit sleep mode once
the register update is complete.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adcx140: Fix digital gain range

According to its datasheet, the digital gain should be -100 dB when
CHx_DVOL is 1 and 27 dB when CHx_DVOL is 255. But with the current
dig_vol_tlv, "Digital CHx Out Volume" shows 27.5 dB if CHx_DVOL is 255
and -95.5 dB if CHx_DVOL is 1. This commit fixes this bug.

Fixes: 689c7655b50c ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20200908090417.16695-1-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: topology: disable size checks for bytes_ext controls if needed

When CONFIG_SND_CTL_VALIDATION is set, accesses to extended bytes
control generate spurious error messages when the size exceeds 512
bytes, such as

[ 11.224223] sof_sdw sof_sdw: control 2:0:0:EQIIR5.0 eqiir_coef_5:0:
invalid count 1024

In addition the error check returns -EINVAL which has the nasty side
effect of preventing applications accessing controls from working,
e.g.

root@plb:~# alsamixer
cannot load mixer controls: Invalid argument

It's agreed that the control interface has been abused since 2014, but
forcing a check should not prevent existing solutions from working.

This patch skips the checks conditionally if CONFIG_SND_CTL_VALIDATION
is set and the byte array provided by topology is > 512. This
preserves the checks for all other cases.

Fixes: 1a3232d2f61d2 ('ASoC: topology: Add support for TLV bytes controls')
BugLink: https://github.com/thesofproject/linux/issues/2430
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917103912.2565907-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_audmix: make clock and output src write only

"alsactl -f state.conf store/restore" sequence fails because setting
"mixing clock source" and "output source" requires active TDM clock
being started for configuration propagation. Make these two controls
write only so that their values are not stored at "alsactl store".

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1600104274-13110-1-git-send-email-viorel.suman@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1015: Fix the failure to flush DAC data before playback

Fix the failure to flush DAC data before playback.

Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1600073839-6762-2-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1015: Fix DC calibration on bypass boost mode

Fix the DC calibration unsuccessful issue on rt1015
bypass boost mode.

Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1600073839-6762-1-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: SOF: DSP core management fixes for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

This series contains some improvements to how DSP core management
is done in SOF, and adds a distinction between cores managed by
the host versus cores managed by the DSP.

Pierre-Louis Bossart (1):
  ASoC: SOF: Intel: hda-loader: s/master/primary

Ranjani Sridharan (3):
  ASoC: SOF: rename cores_mask to host_managed_cores_mask
  ASoC: SOF: Intel: hda: modify core_power_up/down op
  ASoC: SOF: Intel: remove the  HDA_DSP_CORE_MASK() macro

 sound/soc/sof/intel/apl.c        |  2 +-
 sound/soc/sof/intel/bdw.c        |  2 +-
 sound/soc/sof/intel/byt.c        |  6 +++---
 sound/soc/sof/intel/cnl.c        | 15 ++++-----------
 sound/soc/sof/intel/hda-dsp.c    | 20 +++++++++++++++++---
 sound/soc/sof/intel/hda-loader.c | 11 +++++------
 sound/soc/sof/intel/hda.c        |  2 +-
 sound/soc/sof/intel/hda.h        |  3 ---
 sound/soc/sof/intel/shim.h       |  2 +-
 sound/soc/sof/intel/tgl.c        |  2 +-
 10 files changed, 34 insertions(+), 31 deletions(-)

--
2.27.0

Merge series "ASoC: mediatek: mt8183-da7219: support machine driver for rt1015p" from Tzung-Bi Shih <tzungbi@google.com>:

The series reuses mt8183-da7219-max98357.c for supporting machine
driver with rt1015p speaker amplifier.

The 1st patch adds document for the new proposed compatible string.

The 2nd patch changes the machine driver to support "RT1015P" codec.

Tzung-Bi Shih (2):
  ASoC: dt-bindings: mt8183-da7219: add compatible string for using
    rt1015p
  ASoC: mediatek: mt8183-da7219: support machine driver with rt1015p

 .../bindings/sound/mt8183-da7219-max98357.txt |  1 +
 sound/soc/mediatek/Kconfig                    |  1 +
 .../mediatek/mt8183/mt8183-da7219-max98357.c  | 40 +++++++++++++++++++
 3 files changed, 42 insertions(+)

--
2.28.0.526.ge36021eeef-goog

Merge series "ASoC: ti: j721e-evm: Support for j7200 variant" from Peter Ujfalusi <peter.ujfalusi@ti.com>:

Hi,

Changes since v1:
- Suffix the 2359296000 constant with 'u' to silence C90 warning

When j7200 SOM is connected to the CPB, the audio setup is a bit different:
Only 48KHz family have clock path, 44.1KHz is not supported.

Update the binding documentation and add support for the j7200 version of CPB
to the driver.

Regards,
Peter
---
Peter Ujfalusi (2):
  ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb
  ASoC: ti: j721e-evm: Add support for j7200-cpb audio

 .../bindings/sound/ti,j721e-cpb-audio.yaml    | 92 ++++++++++++++-----
 sound/soc/ti/j721e-evm.c                      | 11 +++
 2 files changed, 81 insertions(+), 22 deletions(-)

--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

ASoC: stm32: sai: add pm_runtime support

Enable support of pm_runtime on STM32 SAI driver to allow
SAI power state monitoring.
pm_runtime_put_autosuspend() is called from ASoC framework
on pcm device close.
The pmdown_time delay is available in runtime context, and may be set
in SAI driver to take into account shutdown delay on playback.
However, this shutdown delay is already handled in the DAPMs
of the audio codec linked to SAI CPU DAI.
So, the choice is made, not to support this delay on CPU DAI side.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200911081507.7276-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: rockchip_i2s: fix a possible divide-by-zero bug in rockchip_i2s_hw_params()

The variable bclk_rate is checked in:
  if (bclk_rate && mclk_rate % bclk_rate)

This indicates that bclk_rate can be zero.
If so, a divide-by-zero bug will occur:
  div_bclk = mclk_rate / bclk_rate;

To fix this possible bug, the function returns -EINVAL when bclk_rate is
zero.

Signed-off-by: Tuo Li <tuoli96@outlook.com>
Link: https://lore.kernel.org/r/TY2PR04MB4029799E60A5BCAAD5B7B5BBB8280@TY2PR04MB4029.apcprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: Use DMI oem string search for tgl_max98373_rt5682

DMI product name is used to support system variants based out of
tgl_max98373_rt5682 in current implementation. Replace this DMI search with
DMI_OEM_STRING. Coreboot(BIOS used in these systems) is
setting the needed DMI_OEM_STRING field to uniquely identify these
systems.

Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910162705.2026036-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-loader: s/master/primary

Use inclusive language for DSP cores.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: remove the HDA_DSP_CORE_MASK() macro

Remove the HDA_DSP_CORE_MASK() macro and use BIT() and GENMASK()
macros directly for more clarity.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>