selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".

[ Upstream commit e59370b2e96eb8e7e057a2a16e999ff385a3f2fb ]

The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.

We don't need DAD here since we're working on isolated device pairs.

Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)

[ Upstream commit 9828994ac492e8e7de47fe66097b7e665328f348 ]

Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes.

Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix macsec ssci attribute handling in offload path

[ Upstream commit f5e1ed04aa2ea665a796f0109091ca3f2b01024a ]

Currently when macsec offload is set with extended packet number (epn)
enabled, the driver wrongly deduce the short secure channel identifier
(ssci) from the salt instead of the stand alone ssci attribute as it
should, consequently creating a mismatch between the kernel and driver's
ssci values.
Fix by using the ssci value from the relevant attribute.

Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Don't support encap rules with gbp option

[ Upstream commit d515d63cae2cd186acf40deaa8ef33067bb7f637 ]

Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.

To fix this issue, check if the encap rule has gbp option and don't
offload the rule

Fixes: d8f9dfae49ce ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix ptp max frequency adjustment range

[ Upstream commit fe91d57277eef8bb4aca05acfa337b4a51d0bba4 ]

.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.

Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Fix child PKEY interface stats on rx path

[ Upstream commit b5e23931c45a2f99f60a2f2b98a9e4d5a62a5b13 ]

The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.

Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.

Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent

[ Upstream commit 31c70bfe58ef09fe36327ddcced9143a16e9e83d ]

A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.

Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.

This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.

Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Block queue count configuration when sub interfaces are present

[ Upstream commit 806a8df7126a8c05d60411eeb81057c2a8bbe7a7 ]

PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.

This change disallows setting the queue count on the parent interface when
sub interfaces are present.

This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.

The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.

Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Verify dev is present for fix features ndo

[ Upstream commit ab4b01bfdaa69492fb36484026b0a0f0af02d75a ]

The native NIC port net device instance is being used as Uplink
representor.  While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.

Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix command stats access after free

[ Upstream commit da2e552b469a0cd130ff70a88ccc4139da428a65 ]

Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).

Fix it by making command stats statically allocated on driver probe.

Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667]  _raw_spin_lock_irq+0x23/0x26
[ 2394.831858]  cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020]  mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175]  mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337]  mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454]  ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562]  __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663]  ? __rtnl_unlock+0x25/0x50
[ 2394.839755]  __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862]  duplex_show+0x6e/0xc0
[ 2394.841963]  dev_attr_show+0x1c/0x40
[ 2394.843048]  sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123]  seq_read+0x153/0x410
[ 2394.845187]  vfs_read+0x91/0x140
[ 2394.846226]  ksys_read+0x4f/0xb0
[ 2394.847234]  do_syscall_64+0x5b/0x1a0
[ 2394.848228]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: TC, Keep mod hdr actions after mod hdr alloc

[ Upstream commit 5e72f3f1c558019082cfeedeed73748f35d780c6 ]

When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.

In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.

Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.

Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: check attr pointer validity before dereferencing it

[ Upstream commit e0bf81bf0d3d4747c146e0bf44774d3d881d7137 ]

Fix attr pointer validity checks after it was already
dereferenced.

Fixes: cb0d54cbf948 ("net/mlx5e: Fix wrong source vport matching on tunnel rule")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "r8169: disable detection of chip version 36"

[ Upstream commit 2ea26b4de6f42b74a5f1701de41efa6bc9f12666 ]

This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59.

This chip version seems to be very rare, but it exits in consumer
devices, see linked report.

Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install
Fixes: 42666b2c452c ("r8169: disable detection of chip version 36")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_mpls: Fix warning during failed attribute validation

[ Upstream commit 9e17f99220d111ea031b44153fdfe364b0024ff2 ]

The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':

"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
   NLA_BINARY           Validation function called for the attribute.
   All other            Unused - but note that it's a union
"

This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.

Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.

No regressions in MPLS tests:

 # ./tdc.py -f tc-tests/actions/mpls.json
 [...]
 # echo $?
 0

[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
 <TASK>
 __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
 netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 ____sys_sendmsg+0x38f/0x500 net/socket.c:2482
 ___sys_sendmsg net/socket.c:2536 [inline]
 __sys_sendmsg+0x197/0x230 net/socket.c:2565
 __do_sys_sendmsg net/socket.c:2574 [inline]
 __se_sys_sendmsg net/socket.c:2572 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Remove rcu locks from user resources

[ Upstream commit a309c7194e8a2f8bd4539b9449917913f6c2cd50 ]

User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.

Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources.

Fixes: e14c02e6b699 ("drm/vmwgfx: Look up objects without taking a reference")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207172907.959037-1-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Remove vmwgfx_hashtab

[ Upstream commit 9da30cdd6a318595199319708c143ae318f804ef ]

The vmwgfx driver has migrated from using the hashtable in vmwgfx_hashtab
to the linux/hashtable implementation. Remove the vmwgfx_hashtab from the
driver.

Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-12-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Refactor ttm reference object hashtable to use linux/hashtable.

[ Upstream commit 76a9e07f270cf5fb556ac237dbf11f5dacd61fef ]

This is part of an effort to move from the vmwgfx_open_hash hashtable to
linux/hashtable implementation.
Refactor the ref_hash hashtable, used for fast lookup of reference objects
associated with a ttm file.
This also exposed a problem related to inconsistently using 32-bit and
64-bit keys with this hashtable. The hash function used changes depending
on the size of the type, and results are not consistent across numbers,
for example, hash_32(329) = 329, but hash_long(329) = 328. This would
cause the lookup to fail for objects already in the hashtable, since keys
of different sizes were being passed during adding and lookup. This was
not an issue before because vmwgfx_open_hash always used hash_long.
Fix this by always using 64-bit keys for this hashtable, which means that
hash_long is always used.

Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-11-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Refactor resource validation hashtable to use linux/hashtable implementation.

[ Upstream commit 9e931f2e09701e25744f3d186a4ba13b5342b136 ]

Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenence burden.
As part of this effort, refactor the res_ht hashtable used for resource
validation during execbuf execution to use linux/hashtable implementation.
This also refactors vmw_validation_context to use vmw_sw_context as the
container for the hashtable, whereas before it used a vmwgfx_open_hash
directly. This makes vmw_validation_context less generic, but there is
no functional change since res_ht is the only instance where validation
context used a hashtable in vmwgfx driver.

Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-6-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Remove ttm object hashtable

[ Upstream commit 931e09d8d5b4aa19bdae0234f2727049f1cd13d9 ]

The object_hash hashtable for ttm objects is not being used.
Remove it and perform refactoring in ttm_object init function.

Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-5-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Refactor resource manager's hashtable to use linux/hashtable implementation.

[ Upstream commit 43531dc661b7fb6be249c023bf25847b38215545 ]

Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenance burden.
Refactor cmdbuf resource manager to use linux/hashtable.h implementation
as part of this effort.

Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-4-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Write the driver id registers

[ Upstream commit 7f4c33778686cc2d34cb4ef65b4265eea874c159 ]

Driver id registers are a new mechanism in the svga device to hint to the
device which driver is running. This should not change device behavior
in any way, but might be convenient to work-around specific bugs
in guest drivers.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-2-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Add check for kzalloc

[ Upstream commit 40543b3d9d2c13227ecd3aa90a713c201d1d7f09 ]

Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.
Moreover, use the goto-label to share the clean code.

Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix potential memory leak in ice_gnss_tty_write()

[ Upstream commit f58985620f55580a07d40062c4115d8c9cf6ae27 ]

The ice_gnss_tty_write() return directly if the write_buf alloc failed,
leaking the cmd_buf.

Fix by free cmd_buf if write_buf alloc failed.

Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix potential NULL dereference

[ Upstream commit 0be7ed8e7eb15282b5d0f6fdfea884db594ea9bf ]

Fix potential NULL dereference, in the case when "man", the resource manager
might be NULL, when/if we print debug information.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Fixes: 7554886daa31ea ("drm/amdgpu: Fix size validation for non-exclusive domains (v4)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: fix the O_* fcntl/open macro definitions for riscv

[ Upstream commit 00b18da4089330196906b9fe075c581c17eb726c ]

When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.

Fixes: 582e84f7b779 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: restore mips branch ordering in the _start block

[ Upstream commit 184177c3d6e023da934761e198c281344d7dd65b ]

Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.

Inspecting the sys_brk() call shows the following code:

  0040047c <sys_brk>:
    40047c:       24020fcd        li      v0,4045
    400480:       27bdffe0        addiu   sp,sp,-32
    400484:       0000000c        syscall
    400488:       27bd0020        addiu   sp,sp,32
    40048c:       10e00001        beqz    a3,400494 <sys_brk+0x18>
    400490:       00021023        negu    v0,v0
    400494:       03e00008        jr      ra

It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.

This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:

  0040047c <sys_brk>:
    40047c:       24020fcd        li      v0,4045
    400480:       27bdffe0        addiu   sp,sp,-32
    400484:       0000000c        syscall
    400488:       10e00002        beqz    a3,400494 <sys_brk+0x18>
    40048c:       27bd0020        addiu   sp,sp,32
    400490:       00021023        negu    v0,v0
    400494:       03e00008        jr      ra
    400498:       00000000        nop

Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE

[ Upstream commit 0cbf1ecd8c4801ec7566231491f7ad9cec31098b ]

Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.

Unfortunately commit 8d89cf6ff229 ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.

The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.

There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231115506.82991-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: selftest: Fix the size of the parameter to connect()

[ Upstream commit 7d6ceeb1875cc08dc3d1e558e191434d94840cd5 ]

Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.

The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.

Visible from the trace excerpt:

bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)

BUG: The filename is trimmed to sizeof (struct sockaddr).

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gro: take care of DODGY packets

[ Upstream commit 7871f54e3deed68a27111dda162c4fe9b9c65f8f ]

Jaroslav reported a recent throughput regression with virtio_net
caused by blamed commit.

It is unclear if DODGY GSO packets coming from user space
can be accepted by GRO engine in the future with minimal
changes, and if there is any expected gain from it.

In the meantime, make sure to detect and flush DODGY packets.

Fixes: 5eddb24901ee ("gro: add support of (hw)gro packets to gro stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gro: avoid checking for a failed search

[ Upstream commit e081ecf084d31809242fb0b9f35484d5fb3a161a ]

After searching for a protocol handler in dev_gro_receive, checking for
failure is redundant. Skip the failure code after finding the
corresponding handler.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221108123320.GA59373@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 7871f54e3dee ("gro: take care of DODGY packets")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()

[ Upstream commit 9dab880d675b9d0dd56c6428e4e8352a3339371d ]

Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.

Found by a modified version of syzkaller.

BUG: KASAN: use-after-free in dummy_timer
Call Trace:
 memcpy (mm/kasan/shadow.c:65)
 dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
 transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
 dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
 arch_static_branch (arch/x86/include/asm/jump_label.h:27)
 static_key_false (include/linux/jump_label.h:207)
 timer_expire_exit (include/trace/events/timer.h:127)
 call_timer_fn (kernel/time/timer.c:1475)
 expire_timers (kernel/time/timer.c:1519)
 __run_timers (kernel/time/timer.c:1790)
 run_timer_softirq (kernel/time/timer.c:1803)

Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hvc/xen: lock console list traversal

[ Upstream commit c0dccad87cf68fc6012aec7567e354353097ec1a ]

The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held.  Note users that modify the list already do so with the
lock taken.

Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled.  Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.

While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.

Fixes: 02e19f9c7cac ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Fix arch_scale_freq_tick() on tickless systems

[ Upstream commit 7fb3ff22ad8772bbf0e3ce1ef3eb7b09f431807f ]

In order for the scheduler to be frequency invariant we measure the
ratio between the maximum CPU frequency and the actual CPU frequency.

During long tickless periods of time the calculations that keep track
of that might overflow, in the function scale_freq_tick():

  if (check_shl_overflow(acnt, 2*SCHED_CAPACITY_SHIFT, &acnt))
          goto error;

eventually forcing the kernel to disable the feature for all CPUs,
and show the warning message:

   "Scheduler frequency invariance went wobbly, disabling!".

Let's avoid that by limiting the frequency invariant calculations
to CPUs with regular tick.

Fixes: e2b0d619b400 ("x86, sched: check for counters overflow in frequency invariant accounting")
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Yair Podemsky <ypodemsk@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lore.kernel.org/r/20221130125121.34407-1-ypodemsk@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enable

[ Upstream commit b4e9b8763e417db31c7088103cc557d55cb7a8f5 ]

PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.

Fixes: 1435f66a28b4 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers")
Signed-off-by: Angela Czubak <aczubak@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix handling of cached open files in nfsd4_open codepath

[ Upstream commit 0b3a551fa58b4da941efeb209b3770868e2eddd7 ]

Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a
regular NFSv4 file") added the ability to cache an open fd over a
compound. There are a couple of problems with the way this currently
works:

It's racy, as a newly-created nfsd_file can end up with its PENDING bit
cleared while the nf is hashed, and the nf_file pointer is still zeroed
out. Other tasks can find it in this state and they expect to see a
valid nf_file, and can oops if nf_file is NULL.

Also, there is no guarantee that we'll end up creating a new nfsd_file
if one is already in the hash. If an extant entry is in the hash with a
valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with
the value of op_file and the old nf_file will leak.

Fix both issues by making a new nfsd_file_acquirei_opened variant that
takes an optional file pointer. If one is present when this is called,
we'll take a new reference to it instead of trying to open the file. If
the nfsd_file already has a valid nf_file, we'll just ignore the
optional file and pass the nfsd_file back as-is.

Also rework the tracepoints a bit to allow for an "opened" variant and
don't try to avoid counting acquisitions in the case where we already
have a cached open file.

Fixes: fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file")
Cc: Trond Myklebust <trondmy@hammerspace.com>
Reported-by: Stanislav Saner <ssaner@redhat.com>
Reported-and-Tested-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-and-Tested-by: Torkil Svensgaard <torkil@drcmr.dk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: rework refcounting in filecache

[ Upstream commit ac3a2585f018f10039b4a856dcb122da88c1c1c9 ]

The filecache refcounting is a bit non-standard for something searchable
by RCU, in that we maintain a sentinel reference while it's hashed. This
in turn requires that we have to do things differently in the "put"
depending on whether its hashed, which we believe to have led to races.

There are other problems in here too. nfsd_file_close_inode_sync can end
up freeing an nfsd_file while there are still outstanding references to
it, and there are a number of subtle ToC/ToU races.

Rework the code so that the refcount is what drives the lifecycle. When
the refcount goes to zero, then unhash and rcu free the object. A task
searching for a nfsd_file is allowed to bump its refcount, but only if
it's not already 0. Ensure that we don't make any other changes to it
until a reference is held.

With this change, the LRU carries a reference. Take special care to deal
with it when removing an entry from the list, and ensure that we only
repurpose the nf_lru list_head when the refcount is 0 to ensure
exclusive access to it.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Add an nfsd_file_fsync tracepoint

[ Upstream commit d7064eaf688cfe454c50db9f59298463d80d403c ]

Add a tracepoint to capture the number of filecache-triggered fsync
calls and which files needed it. Also, record when an fsync triggers
a write verifier reset.

Examples:

<...>-97    [007]   262.505611: nfsd_file_free:       inode=0xffff888171e08140 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d2400
<...>-97    [007]   262.505612: nfsd_file_fsync:      inode=0xffff888171e08140 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d2400 ret=0
<...>-97    [007]   262.505623: nfsd_file_free:       inode=0xffff888171e08dc0 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d1e00
<...>-97    [007]   262.505624: nfsd_file_fsync:      inode=0xffff888171e08dc0 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d1e00 ret=0

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: reorganize filecache.c

[ Upstream commit 8214118589881b2d390284410c5ff275e7a5e03c ]

In a coming patch, we're going to rework how the filecache refcounting
works. Move some code around in the function to reduce the churn in the
later patches, and rename some of the functions with (hopefully) clearer
names: nfsd_file_flush becomes nfsd_file_fsync, and
nfsd_file_unhash_and_dispose is renamed to nfsd_file_unhash_and_queue.

Also, the nfsd_file_put_final tracepoint is renamed to nfsd_file_free,
to better match the name of the function from which it's called.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: remove the pages_flushed statistic from filecache

[ Upstream commit 1f696e230ea5198e393368b319eb55651828d687 ]

We're counting mapping->nrpages, but not all of those are necessarily
dirty. We don't really have a simple way to count just the dirty pages,
so just remove this stat since it's not accurate.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Add an NFSD_FILE_GC flag to enable nfsd_file garbage collection

[ Upstream commit 4d1ea8455716ca070e3cd85767e6f6a562a58b1b ]

NFSv4 operations manage the lifetime of nfsd_file items they use by
means of NFSv4 OPEN and CLOSE. Hence there's no need for them to be
garbage collected.

Introduce a mechanism to enable garbage collection for nfsd_file
items used only by NFSv2/3 callers.

Note that the change in nfsd_file_put() ensures that both CLOSE and
DELEGRETURN will actually close out and free an nfsd_file on last
reference of a non-garbage-collected file.

Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=394
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Revert "NFSD: NFSv4 CLOSE should release an nfsd_file immediately"

[ Upstream commit dcf3f80965ca787c70def402cdf1553c93c75529 ]

This reverts commit 5e138c4a750dc140d881dab4a8804b094bbc08d2.

That commit attempted to make files available to other users as soon
as all NFSv4 clients were done with them, rather than waiting until
the filecache LRU had garbage collected them.

It gets the reference counting wrong, for one thing.

But it also misses that DELEGRETURN should release a file in the
same fashion. In fact, any nfsd_file_put() on an file held open
by an NFSv4 client needs potentially to release the file
immediately...

Clear the way for implementing that idea.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Pass the target nfsd_file to nfsd_commit()

[ Upstream commit c252849082ff525af18b4f253b3c9ece94e951ed ]

In a moment I'm going to introduce separate nfsd_file types, one of
which is garbage-collected; the other, not. The garbage-collected
variety is to be used by NFSv2 and v3, and the non-garbage-collected
variety is to be used by NFSv4.

nfsd_commit() is invoked by both NFSv3 and NFSv4 consumers. We want
nfsd_commit() to find and use the correct variety of cached
nfsd_file object for the NFS version that is in use.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix unexpected link reset due to discovery messages

[ Upstream commit c244c092f1ed2acfb5af3d3da81e22367d3dd733 ]

This unexpected behavior is observed:

node 1                    | node 2
------                    | ------
link is established       | link is established
reboot                    | link is reset
up                        | send discovery message
receive discovery message |
link is established       | link is established
send discovery message    |
                          | receive discovery message
                          | link is reset (unexpected)
                          | send reset message
link is reset             |

It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."

However, commit 598411d70f85 has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.

This commit fixes this by restoring the old and correct behavior.

Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed

[ Upstream commit c26de7507d1f5ffa5daf6a4980ef7896889691a9 ]

In current driver, MAC will always enable 2ns delay in RGMII mode,
but that's not the correct usage.

Remove the dwmac_fix_mac_speed() in driver, and recommend "rgmii-id"
for phy-mode in device tree.

Fixes: f2d356a6ab71 ("stmmac: dwmac-mediatek: add support for mt8195")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Relax hw constraints for implicit fb sync

[ Upstream commit d463ac1acb454fafed58f695cb3067fbf489f3a0 ]

The fix commit the commit e4ea77f8e53f ("ALSA: usb-audio: Always apply
the hw constraints for implicit fb sync") tried to address the bug
where an incorrect PCM parameter is chosen when two (implicit fb)
streams are set up at the same time.  This change had, however, some
side effect: once when the sync endpoint is chosen and set up, this
restriction is applied at the next hw params unless it's freed via hw
free explicitly.

This patch is a workaround for the problem by relaxing the hw
constraints a bit for the implicit fb sync.  We still keep applying
the hw constraints for implicit fb sync, but only when the matching
sync EP is being used by other streams.

Fixes: e4ea77f8e53f ("ALSA: usb-audio: Always apply the hw constraints for implicit fb sync")
Reported-by: Ruud van Asseldonk <ruud@veniogames.com>
Link: https://lore.kernel.org/r/4e509aea-e563-e592-e652-ba44af6733fe@veniogames.com
Link: https://lore.kernel.org/r/20230102170759.29610-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Make sure to stop endpoints before closing EPs

[ Upstream commit 0599313e26666e79f6e7fe1450588431b8cb25d5 ]

At the PCM hw params, we may re-configure the endpoints and it's done
by a temporary EP close followed by re-open.  A potential problem
there is that the EP might be already running internally at the PCM
prepare stage; it's seen typically in the playback stream with the
implicit feedback sync.  As this stream start isn't tracked by the
core PCM layer, we'd need to stop it explicitly, and that's the
missing piece.

This patch adds the stop_endpoints() call at snd_usb_hw_params() to
assure the stream stop before closing the EPs.

Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/4e509aea-e563-e592-e652-ba44af6733fe@veniogames.com
Link: https://lore.kernel.org/r/20230102170759.29610-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: cfi: allow building spi-intel standalone

[ Upstream commit d19ab1f785d0b6b9f709799f0938658903821ba1 ]

When MTD or MTD_CFI_GEOMETRY is disabled, the spi-intel driver
fails to build, as it includes the shared CFI header:

include/linux/mtd/cfi.h:62:2: error: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
   62 | #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.

linux/mtd/spi-nor.h does not actually need to include cfi.h, so
remove the inclusion here to fix the warning. This uncovers a
missing #include in spi-nor/core.c so add that there to
prevent a different build issue.

Fixes: e23e5a05d1fd ("mtd: spi-nor: intel-spi: Convert to SPI MEM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221220141352.1486360-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: parsers: scpart: fix __udivdi3 undefined on mips

[ Upstream commit 105c14b84d93168431abba5d55e6c26fa4b65abb ]

This fixes the following compile error on mips architecture with clang
version 16.0.0 reported by the 0-DAY CI Kernel Test Service:
   ld.lld: error: undefined symbol: __udivdi3
   referenced by scpart.c
   mtd/parsers/scpart.o:(scpart_parse) in archive drivers/built-in.a

As a workaround this makes 'offs' a 32-bit type. This is enough, because
the mtd containing partition table practically does not exceed 1 MB. We
can revert this when the [Link] has been resolved.

Link: https://github.com/ClangBuiltLinux/linux/issues/1635
Fixes: 9b78ef0c7997 ("mtd: parsers: add support for Sercomm partitions")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/805fe58e-690f-6a3f-5ebf-2f6f6e6e4599@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8904: fix wrong outputs volume after power reactivation

[ Upstream commit 472a6309c6467af89dbf660a8310369cc9cb041f ]

Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.

Fixes: a91eb199e4dc ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path

[ Upstream commit 45dac1352b55b1d8cb17f218936b2bc2bc1fb4ee ]

of_icc_get() alloc resources for path1, we should release it when not
need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1.
Defer getting path1 to fix this.

Fixes: b9364eed9232 ("drm/msm/dpu: Move min BW request and full BW disable back to mdss")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514264/
Link: https://lore.kernel.org/r/20221207065922.2086368-1-linmq006@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Fix some kernel-doc comments

[ Upstream commit 1bdeb321d1f856346fe0078af09c9e7ffbd2ca7a ]

Make the description of @init to @p in dpu_encoder_phys_wb_init()
and remove @wb_roi in dpu_encoder_phys_wb_setup_fb() to clear the below
warnings:

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:139: warning: Excess function parameter 'wb_roi' description in 'dpu_encoder_phys_wb_setup_fb'
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Function parameter or member 'p' not described in 'dpu_encoder_phys_wb_init'
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Excess function parameter 'init' description in 'dpu_encoder_phys_wb_init'

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3067
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511605/
Link: https://lore.kernel.org/r/20221115014902.45240-1-yang.lee@linux.alibaba.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof-nau8825: fix module alias overflow

[ Upstream commit 3e78986a840d59dd27e636eae3f52dc11125c835 ]

The maximum name length for a platform_device_id entry is 20 characters
including the trailing NUL byte. The sof_nau8825.c file exceeds that,
which causes an obscure error message:

sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding]
MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>");
                                                   ^~~~
include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS'
                                                ^~~~~~
include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO'
                                                       ^~~~
include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO'
                = __MODULE_INFO_PREFIX __stringify(tag) "=" info

I could not figure out how to make the module handling robust enough
to handle this better, but as a quick fix, using slightly shorter
names that are still unique avoids the build issue.

Fixes: 8d0872f6239f ("ASoC: Intel: add sof-nau8825 machine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221221132515.2363276-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_nau8825: support rt1015p speaker amplifier

[ Upstream commit 13c459fa37c9f26e9bf884a832dd67598b5c4d3e ]

Add rt1015p speaker amplifier support with a new board info
'adl_rt1015p_nau8825' which supports NAU8825 on SSP0 and ALC1015Q on
SSP1.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221117231919.112483-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3e78986a840d ("ASoC: Intel: sof-nau8825: fix module alias overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: fix sof-nau8825 link failure

[ Upstream commit 63f3d99b7efe4c5404a9388c05780917099cecf4 ]

The snd-soc-sof_nau8825.ko module fails to link unless the
sof_realtek_common support is also enabled:

ERROR: modpost: "sof_rt1015p_codec_conf" [sound/soc/intel/boards/snd-soc-sof_nau8825.ko] undefined!
ERROR: modpost: "sof_rt1015p_dai_link" [sound/soc/intel/boards/snd-soc-sof_nau8825.ko] undefined!

Fixes: 8d0872f6239f ("ASoC: Intel: add sof-nau8825 machine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221221132559.2402341-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery

[ Upstream commit 1a5665fc8d7a000671ebd3fe69c6f9acf1e0dcd9 ]

When SSU/enter hibern8 fail in WLUN suspend flow, trigger the error handler
and return busy to break the suspend.  Otherwise the consumer will get
stuck in runtime suspend status.

Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20221208072520.26210-1-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile

[ Upstream commit f0a43ba6c66cc0688e2748d986a1459fdd3442ef ]

When Kconfig item CONFIG_SCSI_MPI3MR was introduced for mpi3mr driver, the
Makefile of the driver was not modified to refer the Kconfig item.

As a result, mpi3mr.ko is built regardless of the Kconfig item value y or
m. Also, if 'make localmodconfig' can not find the Kconfig item in the
Makefile, then it does not generate CONFIG_SCSI_MPI3MR=m even when
mpi3mr.ko is loaded on the system.

Refer to the Kconfig item to avoid the issues.

Fixes: c4f7ac64616e ("scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221207023659.2411785-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM

[ Upstream commit 67ff3d0a49f3d445c3922e30a54e03c161da561e ]

storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(),
which in a confidential VM allocates swiotlb bounce buffers. If the I/O
submission fails in storvsc_do_io(), the I/O is typically retried by higher
level code, but the bounce buffer memory is never freed.  The mostly like
cause of I/O submission failure is a full VMBus channel ring buffer, which
is not uncommon under high I/O loads.  Eventually enough bounce buffer
memory leaks that the confidential VM can't do any I/O. The same problem
can arise in a non-confidential VM with kernel boot parameter
swiotlb=force.

Fix this by doing scsi_dma_unmap() in the case of an I/O submission
error, which frees the bounce buffer memory.

Fixes: 743b237c3a7b ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1670183564-76254-1-git-send-email-mikelley@microsoft.com
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: da9211: Use irq handler when ready

[ Upstream commit 02228f6aa6a64d588bc31e3267d05ff184d772eb ]

If the system does not come from reset (like when it is kexec()), the
regulator might have an IRQ waiting for us.

If we enable the IRQ handler before its structures are ready, we crash.

This patch fixes:

[    1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078
[    1.316096] Call trace:
[    1.316101]  blocking_notifier_call_chain+0x20/0xa8
[    1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests
[    1.327823]  regulator_notifier_call_chain+0x1c/0x2c
[    1.327825]  da9211_irq_handler+0x68/0xf8
[    1.327829]  irq_thread+0x11c/0x234
[    1.327833]  kthread+0x13c/0x154

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221124-da9211-v2-0-1779e3c5d491@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix event counts regression in reused RMIDs

commit 2a81160d29d65b5876ab3f824fda99ae0219f05e upstream.

When creating a new monitoring group, the RMID allocated for it may have
been used by a group which was previously removed. In this case, the
hardware counters will have non-zero values which should be deducted
from what is reported in the new group's counts.

resctrl_arch_reset_rmid() initializes the prev_msr value for counters to
0, causing the initial count to be charged to the new group. Resurrect
__rmid_read() and use it to initialize prev_msr correctly.

Unlike before, __rmid_read() checks for error bits in the MSR read so
that callers don't need to.

Fixes: 1d81d15db39c ("x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221220164132.443083-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Fix task CLOSID/RMID update race

commit fe1f0714385fbcf76b0cbceb02b7277d842014fc upstream.

When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.

x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.

Refer to the diagram below:

CPU 0                                   CPU 1
-----                                   -----
__rdtgroup_move_task():
  curr <- t1->cpu->rq->curr
                                        __schedule():
                                          rq->curr <- t1
                                        resctrl_sched_in():
                                          t1->{closid,rmid} -> {1,1}
  t1->{closid,rmid} <- {2,2}
  if (curr == t1) // false
   IPI(t1->cpu)

A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.

In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr().  In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.

It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.

Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.

CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)

  # mkdir /sys/fs/resctrl/test
  # echo $$ > /sys/fs/resctrl/test/tasks
  # perf bench sched messaging -g 40 -l 100000

task-clock time ranges collected using:

  # perf stat rmdir /sys/fs/resctrl/test

Baseline:                     1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms

  [ bp: Massage commit message. ]

Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case

commit 90b926e68f500844dff16b5bcea178dc55cf580a upstream.

Since

  72cbc8f04fe2 ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")

PAT can be enabled without MTRR.

This has resulted in problems e.g. for a SEV-SNP guest running under Hyper-V,
when trying to establish a new mapping via memremap() with WB caching mode, as
pat_x_mtrr_type() will call mtrr_type_lookup(), which in turn is returning
MTRR_TYPE_INVALID due to MTRR being disabled in this configuration.

The result is a mapping with UC- caching, leading to severe performance
degradation.

Fix that by handling MTRR_TYPE_INVALID the same way as MTRR_TYPE_WRBACK
in pat_x_mtrr_type() because MTRR_TYPE_INVALID means MTRRs are disabled.

  [ bp: Massage commit message. ]

Fixes: 72cbc8f04fe2 ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
Reported-by: Michael Kelley (LINUX) <mikelley@microsoft.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230110065427.20767-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/device: Fix period calculation in edac_device_reset_delay_period()

commit e84077437902ec99eba0a6b516df772653f142c7 upstream.

Fix period calculation in case user sets a value of 1000.  The input of
round_jiffies_relative() should be in jiffies and not in milli-seconds.

  [ bp: Use the same code pattern as in edac_device_workq_setup() for
    clarity. ]

Fixes: c4cf3b454eca ("EDAC: Rework workqueue handling")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221020124458.22153-1-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Avoid using Intel mnemonics in AT&T syntax asm

commit 7c6dd961d0c8e7e8f9fdc65071fb09ece702e18d upstream.

With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:

  arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
  arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
  arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant

  arch/x86/boot/bioscall.S: Assembler messages:
  arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
  arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant

Which is due to:

  PR gas/29525

  Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
  templates taking operands, mixed IsString/non-IsString template groups
  (with memory operands) cannot occur anymore. With that
  maybe_adjust_templates() becomes unnecessary (and is hence being
  removed).

More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525

Borislav Petkov further explains:

  " the particular problem here is is that the 'd' suffix is
    "conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
    and the same thing also for string ops (which is the case here) so apparently
    the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
    and phase out 'd' slowly... "

Fixes: 7a734e7dd93b ("x86, setup: "glove box" BIOS calls -- infrastructure")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/imc-pmu: Fix use of mutex in IRQs disabled section

commit 76d588dddc459fefa1da96e0a081a397c5c8e216 upstream.

Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.

Command to trigger the warning:
  # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5

   Performance counter stats for 'sleep 5':

                   0      thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/

         5.002117947 seconds time elapsed

         0.000131000 seconds user
         0.001063000 seconds sys

Below is snippet of the warning in dmesg:

  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
  preempt_count: 2, expected: 0
  4 locks held by perf-exec/2869:
   #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
   #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
   #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
   #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
  irq event stamp: 4806
  hardirqs last  enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
  hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
  softirqs last  enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
  Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
  Call Trace:
    dump_stack_lvl+0x98/0xe0 (unreliable)
    __might_resched+0x2f8/0x310
    __mutex_lock+0x6c/0x13f0
    thread_imc_event_add+0xf4/0x1b0
    event_sched_in+0xe0/0x210
    merge_sched_in+0x1f0/0x600
    visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
    ctx_flexible_sched_in+0xcc/0x140
    ctx_sched_in+0x20c/0x2a0
    ctx_resched+0x104/0x1c0
    perf_event_exec+0x340/0x510
    begin_new_exec+0x730/0xef0
    load_elf_binary+0x3f8/0x1e10
  ...
  do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
  WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
  CPU: 36 PID: 2869 Comm: sleep Tainted: G        W          6.2.0-rc2-00011-g1247637727f2 #61
  Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
  NIP:  c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
  REGS: c00000004d2134e0 TRAP: 0700   Tainted: G        W           (6.2.0-rc2-00011-g1247637727f2)
  MSR:  9000000000021033 <SF,HV,ME,IR,DR,RI,LE>  CR: 48002824  XER: 00000000
  CFAR: c00000000013fb64 IRQMASK: 1

The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.

Fix the issue by changing the mutex lock to spinlock.

Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Fix comments, trim oops in change log, add reported-by tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: netfilter: fix transaction test script timeout handling

commit c273289fac370b6488757236cd62cc2cf04830b7 upstream.

The kselftest framework uses a default timeout of 45 seconds for
all test scripts.

Increase the timeout to two minutes for the netfilter tests, this
should hopefully be enough,

Make sure that, should the script be canceled, the net namespace and
the spawned ping instances are removed.

Fixes: 25d8bcedbf43 ("selftests: add script to stress-test nft packet path vs. control plane")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.

commit 9ea4b476cea1b7d461d16dda25ca3c7e616e2d15 upstream.

When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.

Note that it's harmless since the value will be checked at the next step.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: b9fed748185a ("netfilter: ipset: Check and reject crazy /0 input parameters")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Fix use-after-free bug in dup_user_cpus_ptr()

commit 87ca4f9efbd7cc649ff43b87970888f2812945b8 upstream.

Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be
restricted on asymmetric systems"), the setting and clearing of
user_cpus_ptr are done under pi_lock for arm64 architecture. However,
dup_user_cpus_ptr() accesses user_cpus_ptr without any lock
protection. Since sched_setaffinity() can be invoked from another
process, the process being modified may be undergoing fork() at
the same time.  When racing with the clearing of user_cpus_ptr in
__set_cpus_allowed_ptr_locked(), it can lead to user-after-free and
possibly double-free in arm64 kernel.

Commit 8f9ea86fdf99 ("sched: Always preserve the user requested
cpumask") fixes this problem as user_cpus_ptr, once set, will never
be cleared in a task's lifetime. However, this bug was re-introduced
in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in
do_set_cpus_allowed(). This time, it will affect all arches.

Fix this bug by always clearing the user_cpus_ptr of the newly
cloned/forked task before the copying process starts and check the
user_cpus_ptr state of the source task under pi_lock.

Note to stable, this patch won't be applicable to stable releases.
Just copy the new dup_user_cpus_ptr() function over.

Fixes: 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems")
Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Reported-by: David Wang 王标 <wangbiao3@xiaomi.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221231041120.440785-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer

commit ac9c5e92dd15b9927e7355ccf79df76a58b44344 upstream.

Although it's vanishingly unlikely that anyone would integrate an SMMU
within a coherent interconnect without also making the pagetable walk
interface coherent, the same effect happens if a coherent SMMU fails to
advertise CTTW correctly. This turns out to be the case on some popular
NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test,
even though IOMMU_CACHE *was* previously achieving the desired effect
anyway thanks to the underlying integration.

While those SoCs stand to gain some more general benefits from a
firmware update to override CTTW correctly in DT/ACPI, it's also easy
to work around this in Linux as well, to avoid imposing too much on
affected users - since the upstream client devices *are* correctly
marked as coherent, we can trivially infer their coherent paths through
the SMMU as well.

Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: df198b37e72c ("iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY better")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/d6dc41952961e5c7b21acac08a8bf1eb0f69e124.1671123115.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Don't unregister on shutdown

commit ce31e6ca68bd7639bd3e5ef97be215031842bbab upstream.

Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
 iommu_get_dma_domain+0x14/0x20
 dma_map_page_attrs+0x1ec/0x250
 enetc_start_xmit+0x14c/0x10b0
 enetc_xmit+0x60/0xdc
 dev_hard_start_xmit+0xb8/0x210
 sch_direct_xmit+0x11c/0x420
 __dev_queue_xmit+0x354/0xb20
 ip6_finish_output2+0x280/0x5b0
 __ip6_finish_output+0x15c/0x270
 ip6_output+0x78/0x15c
 NF_HOOK.constprop.0+0x50/0xd0
 mld_sendpack+0x1bc/0x320
 mld_ifc_work+0x1d8/0x4dc
 process_one_work+0x1e8/0x460
 worker_thread+0x178/0x534
 kthread+0xe0/0xe4
 ret_from_fork+0x10/0x20
Code: d503201f f9416800 d503233f d50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt

This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.

The following is one more manifestation of the issue:

$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu:         GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu:         GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu:         GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu:         GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
 iommu_get_dma_domain+0x14/0x20
 dma_unmap_page_attrs+0x38/0x1d0
 enetc_unmap_tx_buff.isra.0+0x6c/0x80
 enetc_poll+0x170/0x910
 __napi_poll+0x40/0x1e0
 net_rx_action+0x164/0x37c
 __do_softirq+0x128/0x368
 run_ksoftirqd+0x68/0x90
 smpboot_thread_fn+0x14c/0x190
Code: d503201f f9416800 d503233f d50323bf (f9405400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

The problem seems to be that iommu_group_remove_device() is allowed to
run with no coordination whatsoever with the shutdown procedure of the
enetc PCI device. In fact, it almost seems as if it implies that the
pci_driver :: shutdown() method is mandatory if DMA is used with an
IOMMU, otherwise this is inevitable. That was never the case; shutdown
methods are optional in device drivers.

This is the call stack that leads to iommu_group_remove_device() during
reboot:

kernel_restart
-> device_shutdown
   -> platform_shutdown
      -> arm_smmu_device_shutdown
         -> arm_smmu_device_remove
            -> iommu_device_unregister
               -> bus_for_each_dev
                  -> remove_iommu_group
                     -> iommu_release_device
                        -> iommu_group_remove_device

I don't know much about the arm_smmu driver, but
arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks
suspicious, since it causes the IOMMU device to unregister and that's
where everything starts to unravel. It forces all other devices which
depend on IOMMU groups to also point their ->shutdown() to ->remove(),
which will make reboot slower overall.

There are 2 moments relevant to this behavior. First was commit
b06c076ea962 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly
non-modular"") when arm_smmu_device_shutdown() was made to run the exact
same thing as arm_smmu_device_remove(). Prior to that, there was no
iommu_device_unregister() call in arm_smmu_device_shutdown(). However,
that was benign until commit 57365a04c921 ("iommu: Move bus setup to
IOMMU device registration"), which made iommu_device_unregister() call
remove_iommu_group().

Restore the old shutdown behavior by making remove() call shutdown(),
but shutdown() does not call the remove() specific bits.

Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-1-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()

commit 142e821f68cf5da79ce722cb9c1323afae30e185 upstream.

A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in
the error handling path of mtk_iommu_v1_probe().

Add the corresponding clk_disable_unprepare(), as already done in the
remove function.

Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Don't unregister on shutdown

commit 32ea2c57dc216b6ad8125fa680d31daa5d421c95 upstream.

Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.

Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.

Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/iova: Fix alloc iova overflows issue

commit dcdb3ba7e2a8caae7bfefd603bc22fd0ce9a389c upstream.

In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.

This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.

Example log as follows:
[  223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[  223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff

2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.

After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue.

Signed-off-by: jianjiao zeng <jianjiao.zeng@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Fixes: 4e89dce72521 ("iommu/iova: Retry from last rb tree node if iova search fails")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230111063801.25107-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Always release pages to the buddy allocator in memblock_free_late().

commit 115d9d77bb0f9152c60b6e8646369fa7f6167593 upstream.

If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.

In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().

For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.

One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.

For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:

v6.2-rc2:
  # grep -E 'Node|spanned|present|managed' /proc/zoneinfo
  Node 0, zone      DMA
          spanned  4095
          present  3999
          managed  3840
  Node 0, zone    DMA32
          spanned  246652
          present  245868
          managed  178867

v6.2-rc2 + patch:
  # grep -E 'Node|spanned|present|managed' /proc/zoneinfo
  Node 0, zone      DMA
          spanned  4095
          present  3999
          managed  3840
  Node 0, zone    DMA32
          spanned  246652
          present  245868
          managed  222816   # +43,949 pages

Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable VCN DPG for GC IP v11.0.4

[ Upstream commit e1d900df63adcb748905131dd6258e570e11aed1 ]

Enable VCN Dynamic Power Gating control for GC IP v11.0.4.

Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0, 6.1
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Enable pg/cg flags on GC11_0_4 for VCN

[ Upstream commit 2a0fe2ca6e9c9bf9c47a9f9f0d67c13281a13f8c ]

This enable VCN PG, CG and JPEG PG, CG

Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e1d900df63ad ("drm/amdgpu: enable VCN DPG for GC IP v11.0.4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: add soc21 common ip block support for GC 11.0.4

[ Upstream commit 311d52367d0a7985ee1132662bad46f09169eed2 ]

Add common soc21 ip block support for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e1d900df63ad ("drm/amdgpu: enable VCN DPG for GC IP v11.0.4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: enable GPO dynamic control support for SMU13.0.7

[ Upstream commit 62b9f835a6c60171845642afec4ce4b44865f10f ]

To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: enable GPO dynamic control support for SMU13.0.0

[ Upstream commit 1794f6a9535bb5234c2b747d1bc6dad03249245a ]

To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: Enable bad memory page/channel recording support for smu v13_0_0

[ Upstream commit 48aa62f07467c8fcd4b4ec7851e13c83e89a1558 ]

Send message to SMU to update bad memory page and bad channel info.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 1794f6a9535b ("drm/amd/pm: enable GPO dynamic control support for SMU13.0.0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: enable mode1 reset on smu_v13_0_10

[ Upstream commit 60cfad329ab877cb62975ea78ed442c2496990ba ]

enable mode1 reset and prioritize debug port on smu_v13_0_10
as a more reliable message processing

v2 - move mode1 reset callback to smu_v13_0_0_ppt.c

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 1794f6a9535b ("drm/amd/pm: enable GPO dynamic control support for SMU13.0.0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ulpi: defer ulpi_register on ulpi_read_id timeout

[ Upstream commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac ]

Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present") Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().

It appears to be caused by ulpi_read_id() on the first test write failing
with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via
DT when the test write fails and returns 0 in that case, even if DT does not
provide the phy. As a result usb probe completes without phy.

Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write
fails. The user should then handle it appropriately. A follow up patch
will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gt: Cleanup partial engine discovery failures

[ Upstream commit 78a033433a5ae4fee85511ee075bc9a48312c79e ]

If we abort driver initialisation in the middle of gt/engine discovery,
some engines will be fully setup and some not. Those incompletely setup
engines only have 'engine->release == NULL' and so will leak any of the
common objects allocated.

v2:
 - Drop the destroy_pinned_context() helper for now.  It's not really
   worth it with just a single callsite at the moment.  (Janusz)

Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915232654.3283095-2-matthew.d.roper@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf/iavf_main: actually log ->src mask when talking about it

commit 6650c8e906ce58404bfdfceceeba7bd10d397d40 upstream.

This fixes a copy-paste issue where dev_err would log the dst mask even
though it is clearly talking about src.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: raw: Deduct extension header length in rawv6_push_pending_frames

commit cb3e9864cdbe35ff6378966660edbcbac955fe17 upstream.

The total cork length created by ip6_append_data includes extension
headers, so we must exclude them when comparing them against the
IPV6_CHECKSUM offset which does not include extension headers.

Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix pci device refcount leak

commit b93fb4405fcb5112c5739c5349afb52ec7f15c07 upstream.

As the comment of pci_get_domain_bus_and_slot() says, it
returns a PCI device with refcount incremented, when finish
using it, the caller must decrement the reference count by
calling pci_dev_put().

In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(),
pci_dev_put() is called to avoid leak.

Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe

commit ad75bd85b1db69c97eefea07b375567821f6ef58 upstream.

The 0x153 version of the kbd backlight control SNC handle has no separate
address to probe if the backlight is there.

This turns the probe call into a set keyboard backlight call with a value
of 0 turning off the keyboard backlight.

Skip probing when there is no separate probe address to avoid this.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1583752
Fixes: 800f20170dcf ("Keyboard backlight control for some Vaio Fit models")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mattia Dongili <malattia@linux.it>
Link: https://lore.kernel.org/r/20221213122943.11123-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm/dsi: Don't require vcca-supply on 14nm PHY

commit a2117773c839a8439a3771e0c040b5c505b083a7 upstream.

On some SoCs (hello SM6115) vcca-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX line, which is
voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/513555/
Link: https://lore.kernel.org/r/20221130135807.45028-1-konrad.dybcio@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm/dsi: Don't require vdds-supply on 10nm PHY

commit ef11cb7a29c0e13031c968190ea8f86104e7fb6a upstream.

On some SoCs (hello SM6350) vdds-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX/mx.lvl line,
which is voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511889/
Link: https://lore.kernel.org/r/20221116163218.42449-1-konrad.dybcio@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer

commit 1cba0d150fa102439114a91b3e215909efc9f169 upstream.

There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.

Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.

Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID

Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text

Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller

Changes in v4:
-- split into two patches

Changes in v5:
-- delete empty line between tags

Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516121/
Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]

commit f4b7f8febd4d9b615fbec2a06bf352b9c3729b11 upstream.

The Lenovo Legion 5 15ARH05 needs ideapad-laptop to call SALS_FNLOCK_ON /
SALS_FNLOCK_OFF on Fn-lock state change to get the LED in the Fn key to
correctly reflect the Fn-lock state.

Add a DMI match for the Legion 5 15ARH05 to the set_fn_lock_led_list[]
table for this.

Fixes: 81a5603a0f50 ("platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221215154357.123876-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/mm: fix incorrect file_map_count for invalid pmd

commit 74c2f81054510d45b813548cb0a1c4ebf87cdd5f upstream.

The page table check trigger BUG_ON() unexpectedly when split hugepage:

 ------------[ cut here ]------------
 kernel BUG at mm/page_table_check.c:119!
 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Modules linked in:
 CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748
 Hardware name: linux,dummy-virt (DT)
 pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : page_table_check_set.isra.0+0x398/0x468
 lr : page_table_check_set.isra.0+0x1c0/0x468
[...]
 Call trace:
  page_table_check_set.isra.0+0x398/0x468
  __page_table_check_pte_set+0x160/0x1c0
  __split_huge_pmd_locked+0x900/0x1648
  __split_huge_pmd+0x28c/0x3b8
  unmap_page_range+0x428/0x858
  unmap_single_vma+0xf4/0x1c8
  zap_page_range+0x2b0/0x410
  madvise_vma_behavior+0xc44/0xe78
  do_madvise+0x280/0x698
  __arm64_sys_madvise+0x90/0xe8
  invoke_syscall.constprop.0+0xdc/0x1d8
  do_el0_svc+0xf4/0x3f8
  el0_svc+0x58/0x120
  el0t_64_sync_handler+0xb8/0xc0
  el0t_64_sync+0x19c/0x1a0
[...]

On arm64, pmd_leaf() will return true even if the pmd is invalid due to
pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count
will not only decrease once but also increase once. Then in set_pte_at(),
the file_map_count increase again, and so trigger BUG_ON() unexpectedly.

Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the
problem.

Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221121073608.4183459-1-liushixin2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ptrace: Use ARM64_SME to guard the SME register enumerations

commit eb9a85261e297292c4cc44b628c1373c996cedc2 upstream.

We currently guard REGSET_{SSVE, ZA} using ARM64_SVE for no good reason.
Both enumerations would be pointless without ARM64_SME and create two empty
entries in aarch64_regsets[] which would then become part of a process's
native regset view (they should be ignored though).

Switch to use ARM64_SME instead.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221214135943.379-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-phy-28nm: Add missing qcom, dsi-phy-regulator-ldo-mode

commit be79f805a1e1b95605c825f1c513bdd2c8b167ed upstream.

Add in missing qcom,dsi-phy-regulator-ldo-mode to the 28nm DSI PHY.
When converting from .txt to .yaml we missed this one.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516205/
Link: https://lore.kernel.org/r/20221229124438.504770-2-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/mm: add pud_user_exec() check in pud_user_accessible_page()

commit 730a11f982e61aaef758ab552dfb7c30de79e99b upstream.

Add check for the executable case in pud_user_accessible_page() too
like what we did for pte and pmd.

Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221122123137.429686-1-liushixin2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/signal: Always accept SVE signal frames on SME only systems

commit 7dde62f0687c8856b6c0660066c7ee83a6a6f033 upstream.

Currently we reject an attempt to restore a SVE signal frame on a system
with SME but not SVE supported. This means that it is not possible to
disable streaming mode via signal return as this is configured via the
flags in the SVE signal context. Instead accept the signal frame, we will
require it to have a vector length of 0 specified and no payload since the
task will have no SVE vector length configured.

Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-2-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-controller-main: Fix description of core clock

commit 654ffe4b793b42ed6b5909daff0b91809916d94e upstream.

There's a typo in describing the core clock as an 'escape' clock. The
accurate description is 'core'.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515938/
Link: https://lore.kernel.org/r/20221223021025.1646636-4-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-controller-main: Fix power-domain constraint

commit a6f033938beb31f893302a93f83ec0b6460c6cac upstream.

power-domain is required for the sc7180 dispcc GDSC but not every qcom SoC
has a similar dependency for example the apq8064.

Most Qcom SoC's using mdss-dsi-ctrl seem to have the ability to
power-collapse the MDP without collapsing DSI.

For example the qcom vendor kernel commit for apq8084, msm8226, msm8916,
msm8974.

https://review.carbonrom.org/plugins/gitiles/CarbonROM/android_kernel_oneplus_msm8994/+/7b5c011a770daa2811778937ed646237a28a8694

"ARM: dts: msm: add mdss gdsc supply to dsi controller device

 It is possible for the DSI controller to be active when MDP is
 power collapsed. DSI controller needs to have it's own vote for
 mdss gdsc to ensure that gdsc remains on in such cases."

This however doesn't appear to be the case for the apq8064 so we shouldn't
be marking power-domain as required in yaml checks.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515958/
Link: https://lore.kernel.org/r/20221223021025.1646636-3-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/signal: Always allocate SVE signal frames on SME only systems

commit f26cd7372160da2eba31061d7943348ab9f2c01d upstream.

Currently we only allocate space for SVE signal frames on systems that
support SVE, meaning that SME only systems do not allocate a signal frame
for streaming mode SVE state. Change the check so space is allocated if
either feature is supported.

Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-3-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/adreno: Make adreno quirks not overwrite each other

commit 13ef096e342b00e30b95a90c6c13eee1f0bec4c5 upstream.

So far the adreno quirks have all been assigned with an OR operator,
which is problematic, because they were assigned consecutive integer
values, which makes checking them with an AND operator kind of no bueno..

Switch to using BIT(n) so that only the quirks that the programmer chose
are taken into account when evaluating info->quirks & ADRENO_QUIRK_...

Fixes: 370063ee427a ("drm/msm/adreno: Add A540 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516456/
Link: https://lore.kernel.org/r/20230102100201.77286-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware/psci: Don't register with debugfs if PSCI isn't available

commit cef139299fd86098c6e3dbd389d1d0b2462d7710 upstream.

Contrary to popular belief, PSCI is not a universal property of an
ARM/arm64 system. There is a garden variety of systems out there
that don't (or even cannot) implement it.

I'm the first one deplore such a situation, but hey...

On such systems, a "cat /sys/kernel/debug/psci" results in
fireworks, as no invocation callback is registered.

Check for the invoke_psci_fn and psci_ops.get_version pointers
before registering with the debugfs subsystem, avoiding the
issue altogether.

Fixes: 3137f2e60098 ("firmware/psci: Add debugfs support to ease debugging")
Reported-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230105090834.630238-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>