Arnd Bergmann [Fri, 6 May 2022 20:07:12 +0000 (22:07 +0200)]
Merge tag 'samsung-soc-5.19' of git://git./linux/kernel/git/krzk/linux into arm/drivers
Samsung mach/soc changes for v5.19
Cleanup: drop unneeded CONFIG_S3C24XX_PWM and fix some typos.
* tag 'samsung-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: fix typos in comments
ARM: s3c: Drop config symbol S3C24XX_PWM
Link: https://lore.kernel.org/r/20220506081438.149192-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 6 May 2022 20:03:26 +0000 (22:03 +0200)]
Merge tag 'samsung-drivers-5.19' of git://git./linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.19
Make MCT and USI bindings stricter by describing expected interrupts
per variant and expected child node.
* tag 'samsung-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: timer: exynos4210-mct: describe known hardware and its interrupts
dt-bindings: soc: samsung: usi: refer to dtschema for SPI
Link: https://lore.kernel.org/r/20220506081438.149192-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 6 May 2022 20:02:10 +0000 (22:02 +0200)]
Merge tag 'tee-cleanup-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
TEE cleanup
Removes the old and unused TEE_IOCTL_SHM_* flags
Removes unused the unused tee_shm_va2pa() and tee_shm_pa2va() functions
* tag 'tee-cleanup-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: remove flags TEE_IOCTL_SHM_MAPPED and TEE_IOCTL_SHM_DMA_BUF
tee: remove tee_shm_va2pa() and tee_shm_pa2va()
Link: https://lore.kernel.org/r/20220506070328.GA1344495@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 6 May 2022 19:06:25 +0000 (21:06 +0200)]
nvme-apple: fix sparse endianess warnings
The new nvme-apple driver is missing a few conversions to and
from little-endian data:
drivers/nvme/host/apple.c:291:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp1 @@ got restricted __le64 [usertype] prp1 @@
drivers/nvme/host/apple.c:291:19: sparse: expected unsigned long long [usertype] prp1
drivers/nvme/host/apple.c:291:19: sparse: got restricted __le64 [usertype] prp1
drivers/nvme/host/apple.c:292:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp2 @@ got restricted __le64 [usertype] prp2 @@
drivers/nvme/host/apple.c:293:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] length @@ got restricted __le16 [usertype] length @@
drivers/nvme/host/apple.c:351:52: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned int [usertype] next_dma_addr @@ got restricted __le64 [usertype] @@
drivers/nvme/host/apple.c:456:45: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned int [addressable] [usertype] prp_dma @@
drivers/nvme/host/apple.c:459:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned long long [assigned] [usertype] dma_addr @@
drivers/nvme/host/apple.c:474:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp1 @@ got unsigned int [usertype] dma_address @@
drivers/nvme/host/apple.c:475:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp2 @@ got unsigned int [usertype] first_dma @@
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 19:07:45 +0000 (21:07 +0200)]
Merge tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC NVMe driver and dependencies:
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
* tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux:
nvme-apple: Add initial Apple SoC NVMe driver
dt-bindings: nvme: Add Apple ANS NVMe
soc: apple: Add SART driver
dt-bindings: iommu: Add Apple SART DMA address filter
soc: apple: Add RTKit IPC library
soc: apple: Always include Makefile
Link: https://lore.kernel.org/r/20220505154020.84638-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 14:30:15 +0000 (16:30 +0200)]
Merge tag 'arm-soc/for-5.19/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoCs drivers changes for
5.19, please pull the following:
- Qintao adds a missing NULL check to the Broadcom PMB driver after a
memory allocation
- Li removes the redundant suppress_bind_attrs from the brcmstb_gisb
driver which only has a probe and no remove function
* tag 'arm-soc/for-5.19/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Remove the suppress_bind_attrs attribute of the driver
soc: bcm: Check for NULL return of devm_kzalloc()
Link: https://lore.kernel.org/r/20220504210942.1838248-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 14:01:21 +0000 (16:01 +0200)]
Merge tag 'optee-rpc-arg-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE RPC argument cache
Adds caching of the OP-TEE argument structure used to pass request to
secure world. This reduces quite a bit of unnecessary alloc/free and
possibly switching back and forth to secure work in order to register
the buffers in some configurations, most notably FF-A.
* tag 'optee-rpc-arg-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: cache argument shared memory structs
optee: add FF-A capability OPTEE_FFA_SEC_CAP_ARG_OFFSET
optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG
optee: rename rpc_arg_count to rpc_param_count
Link: https://lore.kernel.org/r/20220504201759.GA180315@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 14:00:19 +0000 (16:00 +0200)]
Merge tag 'scmi-updates-5.19' of git://git./linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm SCMI firmware driver updates/fixes for v5.19
The main theme for most of the changes this time is around the addition
of the support for SCMI v3.1 specification changes. Though one of the main
addition in the specification is the powercap protocol, that is still
work in progress and this set includes all other changes bit and pieces
scattered all around the different parts of the specification. There are
few bugs discovered during the process and associated fixes and some
refactoring to simplify the addition of v3.1 support. It mainly includes
the support for extended names, few newly added notifications and async
command support.
Apart from v3.1 SCMI changes, OPTEE transport gets support for dynamic
shared memory.
* tag 'scmi-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (24 commits)
firmware: arm_scmi: Fix late checks on pointer dereference
firmware: arm_scmi: Support optee shared memory in the optee transport
firmware: arm_scmi: Add SCMI v3.1 VOLTAGE_LEVEL_SET_COMPLETE
firmware: arm_scmi: Add SCMI v3.1 clock notifications
firmware: arm_scmi: Add checks for min/max limits in PERFORMANCE_LIMITS_SET
firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts
firmware: arm_scmi: Use common iterators in the perf protocol
firmware: arm_scmi: Use common iterators in the voltage protocol
firmware: arm_scmi: Use common iterators in the clock protocol
firmware: arm_scmi: Add SCMI v3.1 SENSOR_AXIS_NAME_GET support
firmware: arm_scmi: Use common iterators in the sensor protocol
firmware: arm_scmi: Add iterators for multi-part commands
firmware: arm_scmi: Parse clock_enable_latency conditionally
firmware: arm_scmi: Set clock latency to U32_MAX if it is not supported
firmware: arm_scmi: Add SCMI v3.1 protocol extended names support
firmware: arm_scmi: Introduce a common SCMI v3.1 .extended_name_get helper
firmware: arm_scmi: Split protocol specific definitions in a dedicated header
firmware: arm_scmi: Remove unneeded NULL termination of clk name
firmware: arm_scmi: Check CLOCK_RATE_SET_COMPLETE async response
firmware: arm_scmi: Make name_get operations return a const
...
Link: https://lore.kernel.org/r/20220504112906.3491985-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 13:59:27 +0000 (15:59 +0200)]
Merge tag 'ffa-updates-5.19' of git://git./linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm FF-A firmware driver updates/fixes for v5.19
Couple of fixes to handle fragmented memory descriptors and incorrect
UUID parameter passed to ffa_partition_probe. Another fix deals with
the incorrect use of ffa_device's driver_data by the core driver.
Apart from these fixes, there is an addition of ffa_dev_get_drvdata helper
function and its use in optee driver.
* tag 'ffa-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
tee: optee: Use ffa_dev_get_drvdata to fetch driver_data
firmware: arm_ffa: Add ffa_dev_get_drvdata helper function
firmware: arm_ffa: Remove incorrect assignment of driver_data
firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe
firmware: arm_ffa: Fix handling of fragmented memory descriptors
Link: https://lore.kernel.org/r/20220504112853.3491961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 13:56:54 +0000 (15:56 +0200)]
Merge tag 'tee-shm-vmalloc-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
TEE accept vmalloc()ed buffers for tee_shm_register_kernel_buf()
* tag 'tee-shm-vmalloc-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: make tee_shm_register_kernel_buf vmalloc supported
Link: https://lore.kernel.org/r/20220503192916.GA3288817@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 13:48:31 +0000 (15:48 +0200)]
Merge tag 'tee-menu-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Combine TEE config and menu in one line
* tag 'tee-menu-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: combine "config" and "menu" for TEE's menuconfig
Link: https://lore.kernel.org/r/20220503191626.GA3278203@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 13:21:00 +0000 (15:21 +0200)]
Merge tag 'reset-for-v5.19' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.19
Add Meson-S4 SoC reset controller support to reset-meson, AST2600 LPC
reset controller support to reset-simple, and R9A07G054 USBPHY reset
controller support to reset-rzg2l-usbphy-ctrl. Add ACPI _RST support to
device_reset(), simplify the uniphier-glue reset driver using bulk API
and devres and clean up its dt-bindings docs. Convert most dt-bindings
docs from txt to yaml.
* tag 'reset-for-v5.19' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
dt-bindings: reset: nuvoton,npcm-reset: Convert to yaml
dt-bindings: reset: lantiq,reset: Convert to yaml
dt-bindings: reset: bitmain,bm1880-reset: Convert to yaml
dt-bindings: reset: berlin: Convert to yaml
dt-bindings: reset: ath79: Convert to yaml
dt-bindings: reset: amlogic,meson-axg-audio-arb: Convert to yaml
dt-bindings: reset: uniphier-glue: Clean up clocks, resets, and their names using compatible string
reset: Kconfig: Make RESET_RZG2L_USBPHY_CTRL depend on ARCH_RZG2L
reset: ACPI reset support
reset: simple: Add AST2600 compatible
reset: reset-meson: add support for the Meson-S4 SoC Reset Controller
dt-bindings: reset: add bindings for the Meson-S4 SoC Reset Controller
dt-bindings: reset: Add compatible for Meson-S4 Reset Controller
reset: uniphier-glue: Use devm_add_action_or_reset()
reset: uniphier-glue: Use reset_control_bulk API
Link: https://lore.kernel.org/r/20220503160057.46625-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Philipp Zabel [Thu, 7 Apr 2022 15:43:37 +0000 (17:43 +0200)]
dt-bindings: reset: st,sti-powerdown: Convert to yaml
Convert the device tree bindings for the STMicroelectronics STi
Peripheral Powerdown reset controller to YAML schema to allow
participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-13-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:36 +0000 (17:43 +0200)]
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
Convert the device tree bindings for the STMicroelectronics STi
SoftReset controller to YAML schema to allow participating in DT
validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-12-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:35 +0000 (17:43 +0200)]
dt-bindings: reset: socfpga: Convert to yaml
Convert the device tree bindings for the Altera SOCFPGA reset manager to
YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-11-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:32 +0000 (17:43 +0200)]
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
Convert the device tree bindings for the AXS10x reset controller to YAML
schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-8-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:30 +0000 (17:43 +0200)]
dt-bindings: reset: nuvoton,npcm-reset: Convert to yaml
Convert the device tree bindings for the Nuvoton NPCM reset controller
to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-6-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:29 +0000 (17:43 +0200)]
dt-bindings: reset: lantiq,reset: Convert to yaml
Convert the device tree bindings for the Lantiq XWAY SoC RCU reset
controller to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-5-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:28 +0000 (17:43 +0200)]
dt-bindings: reset: bitmain,bm1880-reset: Convert to yaml
Convert the device tree bindings for the Bitmain BM1880 reset controller
to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-4-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:27 +0000 (17:43 +0200)]
dt-bindings: reset: berlin: Convert to yaml
Convert the device tree bindings for the Marvell Berlin reset controller
to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-3-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:26 +0000 (17:43 +0200)]
dt-bindings: reset: ath79: Convert to yaml
Convert the device tree bindings for the Qualcomm Atheros AR7xxx/AR9XXX
reset controller to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Alban Bedel <albeu@free.fr>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-2-p.zabel@pengutronix.de
Philipp Zabel [Thu, 7 Apr 2022 15:43:25 +0000 (17:43 +0200)]
dt-bindings: reset: amlogic,meson-axg-audio-arb: Convert to yaml
Convert the device tree bindings for the Amlogic audio memory arbiter
controller to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407154338.4190674-1-p.zabel@pengutronix.de
Kunihiko Hayashi [Tue, 5 Apr 2022 07:56:18 +0000 (16:56 +0900)]
dt-bindings: reset: uniphier-glue: Clean up clocks, resets, and their names using compatible string
Instead of "oneOf:" choices, use "allOf:" and "if:" to define clocks,
resets, and their names that can be taken by the compatible string.
The order of clock-names and reset-names doesn't change here.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1649145378-30358-1-git-send-email-hayashi.kunihiko@socionext.com
Lad Prabhakar [Wed, 6 Apr 2022 07:16:47 +0000 (08:16 +0100)]
reset: Kconfig: Make RESET_RZG2L_USBPHY_CTRL depend on ARCH_RZG2L
The USBPHY Control block is identical on Renesas RZ/G2L and RZ/V2L SoC's,
so instead of adding dependency for each SoC's add dependency on
ARCH_RZG2L. The ARCH_RZG2L config option is already selected by
ARCH_R9A07G044 and ARCH_R9A07G054.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220406071647.14037-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Krishna Yarlagadda [Mon, 7 Mar 2022 13:56:26 +0000 (19:26 +0530)]
reset: ACPI reset support
Some of the IO devices like I2C or SPI require reset at runtime to
recover from an error condition without changing the power state of
the system. Added check for ACPI handle and a call to method '__RST'
if supported. Devices using device tree method are unaffected by this.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
[p.zabel@pengutronix.de: wrap in #ifdef CONFIG_ACPI due to missing stubs]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220307135626.16673-1-kyarlagadda@nvidia.com
Joel Stanley [Mon, 21 Feb 2022 07:26:50 +0000 (17:56 +1030)]
reset: simple: Add AST2600 compatible
Similar to the 2400 and 2500, the LPC controller has some simple reset
lines that are used by the UART devices.
This is already documented in LPC bindings document.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220221072650.129348-1-joel@jms.id.au
Zelong Dong [Fri, 7 Jan 2022 02:39:31 +0000 (10:39 +0800)]
reset: reset-meson: add support for the Meson-S4 SoC Reset Controller
Compared to the A1 SoCs the number of RESET registers is different
and the offset for the level registers is the same. Add a new
compatible string and struct meson_reset_param to add support for the
reset controller on the S4 SoC.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107023931.13251-4-zelong.dong@amlogic.com
Zelong Dong [Fri, 7 Jan 2022 02:39:30 +0000 (10:39 +0800)]
dt-bindings: reset: add bindings for the Meson-S4 SoC Reset Controller
Add DT bindings for the Meson-S4 SoC Reset Controller include file.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107023931.13251-3-zelong.dong@amlogic.com
Zelong Dong [Fri, 7 Jan 2022 02:39:29 +0000 (10:39 +0800)]
dt-bindings: reset: Add compatible for Meson-S4 Reset Controller
Add new compatible for Amlogic's Meson-S4 Reset Controller
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107023931.13251-2-zelong.dong@amlogic.com
Philipp Zabel [Wed, 15 Dec 2021 09:38:29 +0000 (10:38 +0100)]
reset: uniphier-glue: Use devm_add_action_or_reset()
Slightly simplify uniphier_glue_reset_probe() and drop
uniphier_glue_reset_remove() by using devm_add_action_or_reset()
for clock and reset cleanup.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20211215093829.3209416-2-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Philipp Zabel [Wed, 15 Dec 2021 09:38:28 +0000 (10:38 +0100)]
reset: uniphier-glue: Use reset_control_bulk API
This driver already uses the clk_bulk API. Simplify the driver by using
the reset_control_bulk API as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20211215093829.3209416-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cristian Marussi [Tue, 3 May 2022 12:10:47 +0000 (13:10 +0100)]
firmware: arm_scmi: Fix late checks on pointer dereference
A few dereferences could happen before the iterator pointer argument was
checked for NULL, causing the following smatch warnings:
drivers/firmware/arm_scmi/driver.c:1214 scmi_iterator_run() warn: variable
dereferenced before check 'i' (see line 1210)
Fix by moving the checks early and dropping some unneeded local references.
No functional change.
Link: https://lore.kernel.org/r/20220503121047.3590340-1-cristian.marussi@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arnd Bergmann [Tue, 3 May 2022 13:09:08 +0000 (15:09 +0200)]
Merge tag 'omap-for-v5.19/ti-sysc-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for omaps
One patch to remove commas from sentinels for ti-sysc.
* tag 'omap-for-v5.19/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Drop commas after SoC match table sentinels
Arnd Bergmann [Tue, 3 May 2022 13:03:28 +0000 (15:03 +0200)]
Merge tag 'renesas-drivers-for-v5.19-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.19
- Initial support for the new RZ/G2UL SoC.
* tag 'renesas-drivers-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Identify RZ/G2UL SoC
Link: https://lore.kernel.org/r/cover.1650638515.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 12:27:31 +0000 (14:27 +0200)]
Merge tag 'memory-controller-drv-5.19-2' of git://git./linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.19, part two
1. Cleanup: simplify platform_get_resource() calls by using
devm_platform_get_and_ioremap_resource() helper.
2. OMAP: allow building omap-gpmc as module and make it visible (it is
not selected by platform anymore).
* tag 'memory-controller-drv-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: omap-gpmc: Allow building as a module
memory: omap-gpmc: Make OMAP_GPMC config visible and selectable
memory: renesas-rpc-if: simplify platform_get_resource_byname()
memory: brcmstb_dpfe: simplify platform_get_resource_byname()
memory: tegra: mc: simplify platform_get_resource()
memory: ti-emif-pm: simplify platform_get_resource()
memory: ti-emif: simplify platform_get_resource()
memory: emif: simplify platform_get_resource()
memory: da8xx-ddrctl: simplify platform_get_resource()
Link: https://lore.kernel.org/r/20220503070652.54091-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sven Peter [Sun, 1 May 2022 14:55:12 +0000 (16:55 +0200)]
nvme-apple: Add initial Apple SoC NVMe driver
Apple SoCs such as the M1 come with an embedded NVMe controller that
is not attached to any PCIe bus. Additionally, it doesn't conform
to the NVMe specification and requires a bunch of changes to command
submission and IOMMU configuration to work.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Sven Peter [Sun, 1 May 2022 14:55:09 +0000 (16:55 +0200)]
dt-bindings: nvme: Add Apple ANS NVMe
Apple SoCs such as the M1 come with an embedded NVMe coprocessor called
ANS2.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Sven Peter [Sun, 1 May 2022 14:55:08 +0000 (16:55 +0200)]
soc: apple: Add SART driver
The NVMe co-processor on the Apple M1 uses a DMA address filter called
SART for some DMA transactions. This adds a simple driver used to
configure the memory regions from which DMA transactions are allowed.
Unlike a real IOMMU, SART does not support any pagetables and can't be
implemented inside the IOMMU subsystem using iommu_ops.
It also can't be implemented using dma_map_ops since not all DMA
transactions of the NVMe controller are filtered by SART.
Instead, most buffers have to be registered using the integrated NVMe
IOMMU and we can't have two separate dma_map_ops implementations for a
single device.
Co-developed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Sven Peter [Sun, 1 May 2022 14:55:07 +0000 (16:55 +0200)]
dt-bindings: iommu: Add Apple SART DMA address filter
Apple SoCs such as the M1 come with a simple DMA address filter called
SART. Unlike a real IOMMU no pagetables can be configured but instead
DMA transactions can be allowed for up to 16 paddr regions. The consumer
also needs special support since not all DMA allocations have to be
added to this filter.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Sven Peter [Sun, 1 May 2022 14:55:06 +0000 (16:55 +0200)]
soc: apple: Add RTKit IPC library
Apple SoCs such as the M1 come with multiple embedded co-processors
running proprietary firmware. Communication with those is established
over a simple mailbox using the RTKit IPC protocol.
This cannot be implemented inside the mailbox subsystem since on top
of communication over channels we also need support for starting,
hibernating and resetting these co-processors. We also need to
handle shared memory allocations differently depending on the
co-processor and don't want to split that across multiple drivers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Sven Peter [Sun, 1 May 2022 14:55:05 +0000 (16:55 +0200)]
soc: apple: Always include Makefile
We want to allow the code inside drivers/soc/apple to be compiled with
COMPILE_TEST but this will currently result in linking errors because
ARCH_APPLE is not set and make will never recurse into
drivers/soc/apple.
Let's just unconditionally recurse into apple/ since all drivers
in there are guarded by config options anyways.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Sudeep Holla [Fri, 29 Apr 2022 11:39:46 +0000 (12:39 +0100)]
tee: optee: Use ffa_dev_get_drvdata to fetch driver_data
Due to lack of an helper like ffa_dev_get_drvdata, this driver was
fetching driver_data directly accessing the structure member. Now that
we have added an helper, just use the same instead.
Link: https://lore.kernel.org/r/20220429113946.2087145-4-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Fri, 29 Apr 2022 11:39:45 +0000 (12:39 +0100)]
firmware: arm_ffa: Add ffa_dev_get_drvdata helper function
Add a helper function to fetch ffa_dev's driver_data using
dev_get_drvdata. At the same time move existing ffa_dev_set_drvdata
to use dev_set_drvdata.
Link: https://lore.kernel.org/r/20220429113946.2087145-3-sudeep.holla@arm.com
Suggested-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Fri, 29 Apr 2022 11:39:44 +0000 (12:39 +0100)]
firmware: arm_ffa: Remove incorrect assignment of driver_data
The ffa core driver currently assigns its own driver information
to individual ffa device driver_data which is wrong. Firstly, it leaks
this core driver information to individual ffa_device and hence to
ffa_driver. Secondly the ffa_device driver_data is for use by individual
ffa_driver and not for this core driver managing all those devices.
Link: https://lore.kernel.org/r/20220429113946.2087145-2-sudeep.holla@arm.com
Fixes:
d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Fri, 29 Apr 2022 11:39:43 +0000 (12:39 +0100)]
firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe
While we pass uuid_null intentionally to ffa_partition_probe in
ffa_setup_partitions to get the count of the partitions, it must not be
uuid_null in ffa_partition_info_get which is used by the ffa_drivers
to fetch the specific partition info passing the UUID of the partition.
Fix ffa_partition_info_get by passing the received uuid down to
ffa_partition_probe so that the correct partition information is fetched.
Link: https://lore.kernel.org/r/20220429113946.2087145-1-sudeep.holla@arm.com
Fixes:
d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Reported-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Roger Quadros [Tue, 26 Apr 2022 08:26:11 +0000 (11:26 +0300)]
memory: omap-gpmc: Allow building as a module
Allow OMAP_GPMC to be built as a module.
When building this driver as a module, the symbol
'of_default_bus_match_table' will not be found as it is not being
exported.
The of_match_node() call is redundant anyways as
of_platform_default_populate() already takes care of matching with
'of_default_bus_match_table'. So get rid of that call. This will also
resolve the module build failure.
Move compatible match table to the end where it is usually expected.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20220426082611.24427-3-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Roger Quadros [Tue, 26 Apr 2022 08:26:10 +0000 (11:26 +0300)]
memory: omap-gpmc: Make OMAP_GPMC config visible and selectable
So far for armv7 TI platforms, GPMC was being selected by
arch/arm/mach-* architecture Kconfig files.
For K3 platforms, GPMC is no longer required for basic boot and cannot
be always enabled by default by mach- Kconfig.
We need a way for user (or board defconfig) to enable it if required so
make OMAP_GPMC Kconfig option always visible.
Drop COMPILE_TEST as build fails if IRQ_DOMAIN is not enabled.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20220426082611.24427-2-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Etienne Carriere [Mon, 25 Apr 2022 08:51:27 +0000 (10:51 +0200)]
firmware: arm_scmi: Support optee shared memory in the optee transport
Add support for TEE shared memory in optee scmi transport. When using
tee shared memory, scmi optee transport manages SCMI messages using
msg protocol(from msg.c) in shared memory, whereas smt(from shmem.c)
protocol is used with static IOMEM based shared buffers.
Link: https://lore.kernel.org/r/20220425085127.2009-1-etienne.carriere@linaro.org
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:49 +0000 (16:05 +0100)]
firmware: arm_scmi: Add SCMI v3.1 VOLTAGE_LEVEL_SET_COMPLETE
Add SCMI v3.1 voltage protocol support for asynchronous VOLTAGE_LEVEL_SET
command.
Note that, if a voltage domain is advertised to support the asynchronous
version of VOLTAGE_LEVEL_SET, the command will be issued asynchronously
unless explicitly requested to use the synchronous version by setting the
mode to SCMI_VOLTAGE_LEVEL_SET_SYNC when calling voltage_ops->level_set.
The SCMI regulator driver level_set invocation has been left unchanged
so that it will transparently use the asynchronous version if available.
Link: https://lore.kernel.org/r/20220330150551.2573938-21-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:48 +0000 (16:05 +0100)]
firmware: arm_scmi: Add SCMI v3.1 clock notifications
Add SCMI v3.1 clock pre and post notifications.
Link: https://lore.kernel.org/r/20220330150551.2573938-20-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:51 +0000 (16:05 +0100)]
firmware: arm_scmi: Add checks for min/max limits in PERFORMANCE_LIMITS_SET
Starting with SCMI v3.1, the PERFORMANCE_LIMITS_SET command allows a user
to request only one between max and min ranges to be changed, while leaving
the other untouched if set to zero in the request. Anyway SCMI v3.1 states
also explicitly that you cannot leave both of those unchanged (zeroed) when
issuing such command, so add a proper check for this condition.
Link: https://lore.kernel.org/r/20220330150551.2573938-23-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: Dropped check for v3.0 and above to make the check
unconditional, updated the subject accordingly]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:50 +0000 (16:05 +0100)]
firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts
Add SCMI v3.1 internal support for parsing message attributes reporting
the capability of a performance domain to report power-cost in microwatts.
Link: https://lore.kernel.org/r/20220330150551.2573938-22-cristian.marussi@arm.com
Cc: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:47 +0000 (16:05 +0100)]
firmware: arm_scmi: Use common iterators in the perf protocol
Make SCMI perf protocol use the common iterator protocol helpers for
issuing the multi-part commands.
Link: https://lore.kernel.org/r/20220330150551.2573938-19-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:46 +0000 (16:05 +0100)]
firmware: arm_scmi: Use common iterators in the voltage protocol
Make SCMI voltage protocol use the common iterator protocol helpers for
issuing the multi-part commands.
Link: https://lore.kernel.org/r/20220330150551.2573938-18-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:45 +0000 (16:05 +0100)]
firmware: arm_scmi: Use common iterators in the clock protocol
Make SCMI clock protocol use the common iterator protocol helpers for
issuing the multi-part commands.
Link: https://lore.kernel.org/r/20220330150551.2573938-17-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:44 +0000 (16:05 +0100)]
firmware: arm_scmi: Add SCMI v3.1 SENSOR_AXIS_NAME_GET support
Add support for SCMI v3.1 SENSOR_AXIS_NAME_GET multi-part command using the
common iterator protocol helpers.
Link: https://lore.kernel.org/r/20220330150551.2573938-16-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:43 +0000 (16:05 +0100)]
firmware: arm_scmi: Use common iterators in the sensor protocol
Make SCMI sensor protocol use the common iterator protocol helpers
for issuing the multi-part commands.
Link: https://lore.kernel.org/r/20220330150551.2573938-15-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:42 +0000 (16:05 +0100)]
firmware: arm_scmi: Add iterators for multi-part commands
SCMI specification defines some commands as optionally issued over multiple
messages in order to overcome possible limitations in payload size enforced
by the configured underlyinng transport.
Introduce some common protocol helpers to provide a unified solution for
issuing such SCMI multi-part commands.
Link: https://lore.kernel.org/r/20220330150551.2573938-14-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:41 +0000 (16:05 +0100)]
firmware: arm_scmi: Parse clock_enable_latency conditionally
The clock_enable_latency field in CLOCK_ATTRIBUTES response message has
been added only since SCMI v3.1. Use the advertised SCMI clock protocol
version as a proper condition check for parsing it, instead of the bare
message length lookup.
Link: https://lore.kernel.org/r/20220330150551.2573938-13-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Thu, 28 Apr 2022 12:29:13 +0000 (13:29 +0100)]
firmware: arm_scmi: Set clock latency to U32_MAX if it is not supported
As per the spec, the clock_enable_delay is the worst case latency
incurred by the platform to enable the clock. The value of 0 indicates
that the platform doesn't support the same and must be considered as
maximum latency for practical purposes.
Currently the value of 0 is assigned as is and is propogated to the clock
framework which can assume that the clock can support atomic enable operation.
Link: https://lore.kernel.org/r/20220428122913.1654821-1-sudeep.holla@arm.com
Fixes:
18f295b758b2 ("firmware: arm_scmi: Add support for clock_enable_latency")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:40 +0000 (16:05 +0100)]
firmware: arm_scmi: Add SCMI v3.1 protocol extended names support
Using the common protocol helper implementation add support for all new
SCMIv3.1 extended names commands related to all protocols with the
exception of SENSOR_AXIS_GET_NAME.
Link: https://lore.kernel.org/r/20220330150551.2573938-12-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:39 +0000 (16:05 +0100)]
firmware: arm_scmi: Introduce a common SCMI v3.1 .extended_name_get helper
Introduce a new set of common protocol operations bound to the protocol
handle structure so that can be invoked by the protocol implementation code
even when protocols are built as distinct loadable kernel module without
the need of exporting new symbols, like already done with scmi_xfer_ops.
Add at first, as new common protocol helper, an .extended_name_get helper
which will ease implementation and will avoid code duplication when adding
new SCMIv3.1 per-protocol _NAME_GET commands.
Link: https://lore.kernel.org/r/20220330150551.2573938-11-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:38 +0000 (16:05 +0100)]
firmware: arm_scmi: Split protocol specific definitions in a dedicated header
Move some SCMI protocol specific definitions from common.h into a the new
dedicated protocols.h header so that SCMI protocols core code can include
only what it needs; this is going to be useful to avoid the risk of growing
indefinitely the dimension of common.h, especially when introducing some
common protocols helper functions.
Header common.h will continue to be included by SCMI core and transport
layers.
Link: https://lore.kernel.org/r/20220330150551.2573938-10-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:37 +0000 (16:05 +0100)]
firmware: arm_scmi: Remove unneeded NULL termination of clk name
The string array 'name' inside struct scmi_clock_info holds the clock name
which was successfully retrieved by querying the SCMI platform, unless the
related underlying SCMI command failed.
Anyway, such scmi_clock_info structure is allocated using devm_kcalloc()
which in turn internally appends a __GFP_ZERO flag to its invocation:
as a consequence the string 'name' field does not need to be zeroed when
we fail to get the clock name via SCMI, it is already NULL terminated.
Remove unneeded explicit NULL termination.
Link: https://lore.kernel.org/r/20220330150551.2573938-9-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:36 +0000 (16:05 +0100)]
firmware: arm_scmi: Check CLOCK_RATE_SET_COMPLETE async response
When CLOCK_RATE_SET command is issued in asynchronous mode the delayed
response CLOCK_RATE_SET_COMPLETE comes back once the SCMI platform has
effectively operated the requested change: such delayed response carries
also the clock ID and the final clock rate that has been set.
As an aid to debug issues, check that the clock ID in the delayed
response matches the expected one and debug print the rate value.
Link: https://lore.kernel.org/r/20220330150551.2573938-8-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:35 +0000 (16:05 +0100)]
firmware: arm_scmi: Make name_get operations return a const
A few protocol operations are available that returns a pointer to an
internal character array representing resource name. Make those functions
return a const pointer to such array.
Link: https://lore.kernel.org/r/20220330150551.2573938-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:34 +0000 (16:05 +0100)]
firmware: arm_scmi: Dynamically allocate implemented protocols array
Move away from a statically allocated array for holding the current set of
protocols implemented by the platform in favour of allocating it
dynamically based on the number of protocols effectively advertised by the
platform via BASE protocol exchanges.
While at that, rectify the BASE_DISCOVER_LIST_PROTOCOLS loop iterations to
terminate only when a number of protocols equal to the advertised ones has
been received, instead of looping till the platform returns no more
protocols descriptors. This new behaviour is better compliant with the
specification and it has been tested to work equally well against an SCMI
stack running on top of an official SCP firmware on a JUNO board.
Link: https://lore.kernel.org/r/20220330150551.2573938-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:33 +0000 (16:05 +0100)]
firmware: arm_scmi: Validate BASE_DISCOVER_LIST_PROTOCOLS response
Do not blindly trust SCMI platform response about list of implemented
protocols, instead validate the reported length of the list of protocols
against the real payload size of the message reply.
Link: https://lore.kernel.org/r/20220330150551.2573938-5-cristian.marussi@arm.com
Fixes:
b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: Added early break if loop_num_ret = 0 and simplified calc_list_sz
calculation]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:32 +0000 (16:05 +0100)]
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
While enumerating protocols implemented by the SCMI platform using
BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is
currently validated in an improper way since the check employs a sum
between unsigned integers that could overflow and cause the check itself
to be silently bypassed if the returned value 'loop_num_ret' is big
enough.
Fix the validation avoiding the addition.
Link: https://lore.kernel.org/r/20220330150551.2573938-4-cristian.marussi@arm.com
Fixes:
b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Wed, 30 Mar 2022 15:05:31 +0000 (16:05 +0100)]
firmware: arm_scmi: Make protocols initialisation fail on basic errors
Bail out of protocol initialisation routine early when basic information
about protocol version and attributes could not be retrieved. Failing to
act this way can lead to a successfully initialized SCMI protocol which
is in fact not fully functional.
Link: https://lore.kernel.org/r/20220330150551.2573938-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Marc Bonnici [Tue, 26 Apr 2022 12:12:19 +0000 (13:12 +0100)]
firmware: arm_ffa: Fix handling of fragmented memory descriptors
Fix the handling of MEM_FRAG_TX/RX SMCs when the full memory descriptor
does not fit in a single innovation of a memory sharing request.
The current implementation expects a FFA_MEM_SHARE/FFA_MEM_LEND
call to always receive a FFA_SUCCESS response, however in the
case where a full descriptor does not fit inside the partitions
TX buffer, the call can instead complete with a FFA_MEM_FRAG_RX SMC
to request the next part of the descriptor to be transmitted.
Similarly a FFA_MEM_FRAG_TX call currently only expects
FFA_MEM_FRAG_RX as a response, however once the full descriptor
has been transmitted the FFA_SUCCESS ABI will be used to indicate
successful transmission.
Update the existing code to match the expected behaviour.
Link: https://lore.kernel.org/r/20220426121219.1801601-1-marc.bonnici@arm.com
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
lizhe [Sun, 20 Mar 2022 06:45:29 +0000 (23:45 -0700)]
bus: brcmstb_gisb: Remove the suppress_bind_attrs attribute of the driver
Even if platform_driver does not set suppress_bind_attrs attribute, when
registering with platform_driver_probe, the value of suppress_bind_attrs is
still true, see __platform_driver_probe().
Signed-off-by: lizhe <sensor1010@163.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
QintaoShen [Thu, 24 Mar 2022 08:35:40 +0000 (16:35 +0800)]
soc: bcm: Check for NULL return of devm_kzalloc()
As the potential failure of allocation, devm_kzalloc() may return NULL. Then
the 'pd->pmb' and the follow lines of code may bring null pointer dereference.
Therefore, it is better to check the return value of devm_kzalloc() to avoid
this confusion.
Fixes:
8bcac4011ebe ("soc: bcm: add PM driver for Broadcom's PMB")
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Andrew Davis [Mon, 25 Apr 2022 14:16:17 +0000 (09:16 -0500)]
tee: remove flags TEE_IOCTL_SHM_MAPPED and TEE_IOCTL_SHM_DMA_BUF
These look to be leftover from an early edition of this driver. Userspace
does not need this information. Checking all users of this that I have
access to I have verified no one is using them.
They leak internal use flags out to userspace. Even more they are not
correct anymore after
a45ea4efa358. Lets drop these flags before
someone does try to use them for something and they become ABI.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Andrew Davis [Mon, 25 Apr 2022 14:16:16 +0000 (09:16 -0500)]
tee: remove tee_shm_va2pa() and tee_shm_pa2va()
We should not need to index into SHMs based on absolute VA/PA.
These functions are not used and this kind of usage should not be
encouraged anyway. Remove these functions.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:59 +0000 (16:28 +0200)]
memory: renesas-rpc-if: simplify platform_get_resource_byname()
Use devm_platform_ioremap_resource_byname() instead of
platform_get_resource_byname() and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:58 +0000 (16:28 +0200)]
memory: brcmstb_dpfe: simplify platform_get_resource_byname()
Use devm_platform_ioremap_resource_byname() instead of
platform_get_resource_byname() and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:57 +0000 (16:28 +0200)]
memory: tegra: mc: simplify platform_get_resource()
Use devm_platform_ioremap_resource() instead of platform_get_resource()
and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:56 +0000 (16:28 +0200)]
memory: ti-emif-pm: simplify platform_get_resource()
Use devm_platform_get_and_ioremap_resource() instead of
platform_get_resource() and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:55 +0000 (16:28 +0200)]
memory: ti-emif: simplify platform_get_resource()
Use devm_platform_ioremap_resource() instead of platform_get_resource()
and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:54 +0000 (16:28 +0200)]
memory: emif: simplify platform_get_resource()
Use devm_platform_ioremap_resource() instead of platform_get_resource()
and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 19 Apr 2022 14:28:53 +0000 (16:28 +0200)]
memory: da8xx-ddrctl: simplify platform_get_resource()
Use devm_platform_get_and_ioremap_resource() instead of
platform_get_resource() and devm_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419142859.380566-1-krzysztof.kozlowski@linaro.org
Jens Wiklander [Tue, 25 Jan 2022 20:26:42 +0000 (21:26 +0100)]
optee: cache argument shared memory structs
Implements a cache to handle shared memory used to pass the argument
struct needed when doing a normal yielding call into secure world.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Krzysztof Kozlowski [Thu, 7 Apr 2022 19:41:27 +0000 (21:41 +0200)]
dt-bindings: timer: exynos4210-mct: describe known hardware and its interrupts
Most of the Samsung Exynos SoCs use almost the same Multi-Core Timer
block, so only two compatibles were used so far (for Exynos4210 and
Exynos4412 flavors) with Exynos4210-one being used in most of the SoCs.
However the Exynos4210 flavor actually differs by number of interrupts.
Add new compatibles, maintaining backward compatibility with Exynos4210,
and constraints for number of interrupts. This allows to exactly match
the Exynos MCT hardware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407194127.19004-1-krzysztof.kozlowski@linaro.org
Arnd Bergmann [Thu, 21 Apr 2022 15:02:44 +0000 (17:02 +0200)]
Merge tag 'memory-controller-drv-5.19' of git://git./linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.19
1. Exynos: Reduce memory usage/allocation in Exynos5422 DMC driver.
2. Renesas:
- Add bindings for R-Car H3/M3/E3.
- Simplify single/double data register access.
3. Minor cleanups: TI/EMIF and FSL/Corenet.
* tag 'memory-controller-drv-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl-corenet-cf: Use helper function devm_platform_ioremap_resource()
memory: renesas-rpc-if: Simplify single/double data register access
dt-bindings: memory: renesas,rpc-if: Document R-Car H3/M3/E3 support
memory: emif: remove unneeded ENOMEM error messages
memory: samsung: exynos5422-dmc: Avoid some over memory allocation
Link: https://lore.kernel.org/r/20220420072712.12648-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Geert Uytterhoeven [Thu, 3 Mar 2022 12:45:52 +0000 (13:45 +0100)]
bus: ti-sysc: Drop commas after SoC match table sentinels
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <
602f74030dc746eaa9f82f115acc46e62c6be165.
1646311501.git.geert+renesas@glider.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lv Ruyi [Mon, 18 Apr 2022 02:01:47 +0000 (02:01 +0000)]
memory: fsl-corenet-cf: Use helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.Make the
code simpler without functional changes.
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220418020147.2556925-1-lv.ruyi@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Linus Torvalds [Sun, 17 Apr 2022 20:57:31 +0000 (13:57 -0700)]
Linux 5.18-rc3
Linus Torvalds [Sun, 17 Apr 2022 17:29:10 +0000 (10:29 -0700)]
Merge tag 'for-linus-5.18-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixlet from Juergen Gross:
"A single cleanup patch for the Xen balloon driver"
* tag 'for-linus-5.18-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: don't use PV mode extra memory for zone device allocations
Linus Torvalds [Sun, 17 Apr 2022 16:55:59 +0000 (09:55 -0700)]
Merge tag 'x86-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
to cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update
which provides TSX development mode does not suddenly make the
system vulnerable to TSX Asynchronous Abort"
* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Disable TSX development mode at boot
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
Linus Torvalds [Sun, 17 Apr 2022 16:53:01 +0000 (09:53 -0700)]
Merge tag 'timers-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for the timers core:
- Fix the warning condition in __run_timers() which does not take
into account that a CPU base (especially the deferrable base) never
has a timer armed on it and therefore the next_expiry value can
become stale.
- Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to
prevent endless spam in dmesg.
- Remove the double star from a comment which is not meant to be in
kernel-doc format"
* tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Fix non-kernel-doc comment
tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
timers: Fix warning condition in __run_timers()
Linus Torvalds [Sun, 17 Apr 2022 16:46:15 +0000 (09:46 -0700)]
Merge tag 'smp-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP core:
- Make the warning condition in flush_smp_call_function_queue()
correct, which checked a just emptied list head for being empty
instead of validating that there was no pending entry on the
offlined CPU at all.
- The @cpu member of struct cpuhp_cpu_state is initialized when the
CPU hotplug thread for the upcoming CPU is created. That's too late
because the creation of the thread can fail and then the following
rollback operates on CPU0. Get rid of the CPU member and hand the
CPU number to the involved functions directly"
* tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
smp: Fix offline cpu check in flush_smp_call_function_queue()
Linus Torvalds [Sun, 17 Apr 2022 16:42:03 +0000 (09:42 -0700)]
Merge tag 'irq-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the interrupt affinity spreading logic to take into
account that there can be an imbalance between present and possible
CPUs, which causes already assigned bits to be overwritten"
* tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Consider that CPUs on nodes can be unbalanced
Linus Torvalds [Sun, 17 Apr 2022 16:36:27 +0000 (09:36 -0700)]
Merge tag 'for-v5.18-rc' of git://git./linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Fix a regression with battery data failing to load from DT
* tag 'for-v5.18-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: Reset err after not finding static battery
power: supply: samsung-sdi-battery: Add missing charge restart voltages
Linus Torvalds [Sun, 17 Apr 2022 16:31:27 +0000 (09:31 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Regular set of fixes for drivers and the dev-interface"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ismt: Fix undefined behavior due to shift overflowing the constant
i2c: dev: Force case user pointers in compat_i2cdev_ioctl()
i2c: dev: check return value when calling dev_set_name()
i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
i2c: pasemi: Wait for write xfers to finish
Linus Torvalds [Sun, 17 Apr 2022 00:07:50 +0000 (17:07 -0700)]
Merge tag 'devicetree-fixes-for-5.18-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix scalar property schemas with array constraints
- Fix 'enum' lists with duplicate entries
- Fix incomplete if/then/else schemas
- Add Renesas RZ/V2L SoC support to Mali Bifrost binding
- Maintainers update for Marvell irqchip
* tag 'devicetree-fixes-for-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: panel-timing: Define a single type for properties
dt-bindings: Fix array constraints on scalar properties
dt-bindings: gpu: mali-bifrost: Document RZ/V2L SoC
dt-bindings: net: snps: remove duplicate name
dt-bindings: Fix 'enum' lists with duplicate entries
dt-bindings: irqchip: mrvl,intc: refresh maintainers
dt-bindings: Fix incomplete if/then/else schemas
dt-bindings: power: renesas,apmu: Fix cpus property limits
dt-bindings: extcon: maxim,max77843: fix ports type
Linus Torvalds [Sun, 17 Apr 2022 00:01:43 +0000 (17:01 -0700)]
Merge tag 'gpio-fixes-for-v5.18-rc3' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A single fix for gpio-sim and two patches for GPIO ACPI pulled from
Andy:
- fix the set/get_multiple() callbacks in gpio-sim
- use correct format characters in gpiolib-acpi
- use an unsigned type for pins in gpiolib-acpi"
* tag 'gpio-fixes-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix setting and getting multiple lines
gpiolib: acpi: Convert type for pin to be unsigned
gpiolib: acpi: use correct format characters
Linus Torvalds [Sat, 16 Apr 2022 23:51:39 +0000 (16:51 -0700)]
Merge tag 'soc-fixes-5.18-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of SoC bugfixes that came in since the merge
window, and more of them are already pending.
This batch includes:
- A boot time regression fix for davinci that triggered on
multi_v5_defconfig when booting any platform
- Defconfig updates to address removed features, changed symbol names
or dependencies, for gemini, ux500, and pxa
- Email address changes for Krzysztof Kozlowski
- Build warning fixes for ep93xx and iop32x
- Devicetree warning fixes across many platforms
- Minor bugfixes for the reset controller, memory controller and SCMI
firmware subsystems plus the versatile-express board"
* tag 'soc-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: config: Update Gemini defconfig
arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with values
ARM: dts: align SPI NOR node name with dtschema
ARM: dts: Fix more boolean properties with values
arm/arm64: dts: qcom: Fix boolean properties with values
arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes
arm: dts: imx: Fix boolean properties with values
arm64: dts: tegra: Fix boolean properties with values
arm: dts: at91: Fix boolean properties with values
arm: configs: imote2: Drop defconfig as board support dropped.
ep93xx: clock: Don't use plain integer as NULL pointer
ep93xx: clock: Fix UAF in ep93xx_clk_register_gate()
ARM: vexpress/spc: Fix all the kernel-doc build warnings
ARM: vexpress/spc: Fix kernel-doc build warning for ve_spc_cpu_in_wfi
ARM: config: u8500: Re-enable AB8500 battery charging
ARM: config: u8500: Add some common hardware
memory: fsl_ifc: populate child nodes of buses and mfd devices
ARM: config: Refresh U8500 defconfig
firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver
firmware: arm_scmi: Replace zero-length array with flexible-array member
...
Linus Torvalds [Sat, 16 Apr 2022 23:42:53 +0000 (16:42 -0700)]
Merge tag 'random-5.18-rc3-for-linus' of git://git./linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- Per your suggestion, random reads now won't fail if there's a page
fault after some non-zero amount of data has been read, which makes
the behavior consistent with all other reads in the kernel.
- Rather than an inconsistent mix of random_get_entropy() returning an
unsigned long or a cycles_t, now it just returns an unsigned long.
- A memcpy() was replaced with an memmove(), because the addresses are
sometimes overlapping. In practice the destination is always before
the source, so not really an issue, but better to be correct than
not.
* tag 'random-5.18-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use memmove instead of memcpy for remaining 32 bytes
random: make random_get_entropy() return an unsigned long
random: allow partial reads if later user copies fail
Linus Torvalds [Sat, 16 Apr 2022 20:38:26 +0000 (13:38 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"13 fixes, all in drivers.
The most extensive changes are in the iscsi series (affecting drivers
qedi, cxgbi and bnx2i), the next most is scsi_debug, but that's just a
simple revert and then minor updates to pm80xx"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer
scsi: qedi: Fix failed disconnect handling
scsi: iscsi: Fix NOP handling during conn recovery
scsi: iscsi: Merge suspend fields
scsi: iscsi: Fix unbound endpoint error handling
scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
scsi: iscsi: Fix endpoint reuse regression
scsi: iscsi: Release endpoint ID when its freed
scsi: iscsi: Fix offload conn cleanup when iscsid restarts
scsi: iscsi: Move iscsi_ep_disconnect()
scsi: pm80xx: Enable upper inbound, outbound queues
scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63
Revert "scsi: scsi_debug: Address races following module load"