Matt Roper [Mon, 13 Jun 2022 16:53:14 +0000 (09:53 -0700)]
drm/i915/pvc: Add recommended MMIO setting
As with past platforms, the bspec's performance tuning guide provides
recommended MMIO settings. Although not technically "workarounds" we
apply these through the workaround framework to ensure that they're
re-applied at the proper times (e.g., on engine resets) and that any
conflicts with real workarounds are flagged.
Bspec: 72161
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613165314.862029-1-matthew.d.roper@intel.com
Matt Roper [Fri, 10 Jun 2022 23:08:01 +0000 (16:08 -0700)]
drm/i915/pvc: Adjust EU per SS according to HAS_ONE_EU_PER_FUSE_BIT()
If we're treating each bit in the EU fuse register as a single EU
instead of a pair of EUs, then that also cuts the number of potential
EUs per subslice in half.
Fixes:
5ac342ef84d7 ("drm/i915/pvc: Add SSEU changes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610230801.459577-1-matthew.d.roper@intel.com
Matt Roper [Wed, 8 Jun 2022 17:07:00 +0000 (10:07 -0700)]
drm/i915/pvc: Add register steering
Ponte Vecchio no longer has MSLICE or LNCF steering, but the bspec does
document several new types of multicast register ranges. Fortunately,
most of the different MCR types all provide valid values at instance
(0,0) so there's no need to read fuse registers and calculate a
non-terminated instance. We'll lump all of those range types (BSLICE,
HALFBSLICE, TILEPSMI, CC, and L3BANK) into a single category called
"INSTANCE0" to keep things simple. We'll also perform explicit steering
for each of these multicast register types, even if the implicit
steering setup for COMPUTE/DSS ranges would have worked too; this is
based on guidance from our hardware architects who suggested that we
move away from implicit steering and start explicitly steer all MCR
register accesses on modern platforms (we'll work on transitioning
COMPUTE/DSS to explicit steering in the future).
Note that there's one additional MCR range type defined in the bspec
(SQIDI) that we don't handle here. Those ranges use a different
steering control register that we never touch; since instance 0 is also
always a valid setting there, we can just ignore those ranges.
Finally, we'll rename the HAS_MSLICES() macro to HAS_MSLICE_STEERING().
PVC hardware still has units referred to as mslices, but there's no
register steering based on mslice for this platform.
v2:
- Rebase on other recent changes
- Swap two table rows to keep table sorted & easy to read. (Harish)
Bspec: 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608170700.4026648-1-matthew.d.roper@intel.com
Matt Roper [Tue, 7 Jun 2022 17:57:16 +0000 (10:57 -0700)]
drm/i915/xehp: Correct steering initialization
Another mistake during the conversion to DSS bitmaps: after retrieving
the DSS ID intel_sseu_find_first_xehp_dss() we forgot to modulo it down
to obtain which ID within the current gslice it is.
Fixes:
b87d39019651 ("drm/i915/sseu: Disassociate internal subslice mask representation from uapi")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607175716.3338661-1-matthew.d.roper@intel.com
Matt Roper [Wed, 8 Jun 2022 00:51:08 +0000 (17:51 -0700)]
drm/i915: More PVC+DG2 workarounds
A new PVC+DG2 workaround has appeared recently:
- Wa_16015675438
And a couple existing DG2 workarounds have been extended to PVC:
- Wa_14015795083
- Wa_18018781329
Note that Wa_16015675438 asks us to program a register that is in the
0x2xxx range typically associated with the RCS engine, even though PVC
does not have an RCS. By default the GuC will think we've made a
mistake and throw an exception when it sees this register on a CCS
engine's save/restore list, so we need to pass an extra GuC control flag
to tell it that this is expected and not a problem.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608005108.3717895-1-matthew.d.roper@intel.com
Jani Nikula [Wed, 11 May 2022 09:46:19 +0000 (12:46 +0300)]
drm/i915/uc: remove accidental static from a local variable
The arrays are static const, but the pointer shouldn't be static.
Fixes:
3d832f370d16 ("drm/i915/uc: Allow platforms to have GuC but not HuC")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511094619.27889-1-jani.nikula@intel.com
Matt Roper [Tue, 7 Jun 2022 15:47:24 +0000 (08:47 -0700)]
drm/i915/dg2: Correct DSS check for Wa_1308578152
When converting our DSS masks to bitmaps, we fumbled the condition used
to check whether any DSS are present in the first gslice. Since
intel_sseu_find_first_xehp_dss() returns a 0-based number, we need a >=
condition rather than >.
Fixes:
b87d39019651 ("drm/i915/sseu: Disassociate internal subslice mask representation from uapi")
Reported-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607154724.3155521-1-matthew.d.roper@intel.com
Anshuman Gupta [Tue, 7 Jun 2022 10:45:42 +0000 (16:15 +0530)]
drm/i915/dg2: Add Wa_14015795083
i915 must disable Render DOP clock gating globally.
v2:
- Addressed cosmetic review comments.
Bspec: 52621
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607104542.8559-1-anshuman.gupta@intel.com
Jani Nikula [Tue, 7 Jun 2022 09:22:07 +0000 (12:22 +0300)]
drm/i915/client: only include what's needed
Only the uapi header is required.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607092207.476653-1-jani.nikula@intel.com
Matt Roper [Thu, 2 Jun 2022 23:30:19 +0000 (16:30 -0700)]
drm/i915/pvc: GuC depriv applies to PVC
We missed this setting in the initial device info patch's definition of
XE_HPC_FEATURES.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602233019.1659283-1-matthew.d.roper@intel.com
Stuart Summers [Wed, 1 Jun 2022 21:06:46 +0000 (14:06 -0700)]
drm/i915: Add extra registers to GPU error dump
Our internal teams have identified a few additional engine registers
that are worth inspecting in error state dumps during development &
debug. Let's capture and print them as part of our error dump.
For simplicity we'll just dump these registers on gen11 and beyond.
Most of these registers have existed since earlier platforms (e.g., gen6
or gen7) but were initially introduced only for a subset of the
platforms' engines; gen11 seems to be where they became available on all
engines.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601210646.615946-1-matthew.d.roper@intel.com
Matt Roper [Wed, 1 Jun 2022 15:07:25 +0000 (08:07 -0700)]
drm/i915/pvc: Add SSEU changes
PVC splits the mask of enabled DSS over two registers. It also changes
the meaning of the EU fuse register such that each bit represents a
single EU rather than a pair of EUs.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-7-matthew.d.roper@intel.com
Matt Roper [Wed, 1 Jun 2022 15:07:24 +0000 (08:07 -0700)]
drm/i915/sseu: Disassociate internal subslice mask representation from uapi
As with EU masks, it's easier to store subslice/DSS masks internally in
a format that's more natural for the driver to work with, and then only
covert into the u8[] uapi form when the query ioctl is invoked. Since
the hardware design changed significantly with Xe_HP, we'll use a union
to choose between the old "hsw-style" subslice masks or the newer xehp
mask. HSW-style masks will be stored in an array of u8's, indexed by
slice (there's never more than 6 subslices per slice on older
platforms). For Xe_HP and beyond where slices no longer exist, we only
need a single bitmask. However we already know that this mask is
eventually going to grow too large for a simple u64 to hold, so we'll
represent it in a manner that can be operated on by the utilities in
linux/bitmap.h.
v2:
- Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status()
v3:
- Eliminate sseu->ss_stride and just calculate the stride while
specifically handling uapi. (Tvrtko)
- Use BITMAP_BITS() macro to refer to size of masks rather than
passing I915_MAX_SS_FUSE_BITS directly. (Tvrtko)
- Report compute/geometry DSS masks separately when dumping Xe_HP SSEU
info. (Tvrtko)
- Restore dropped range checks to intel_sseu_has_subslice(). (Tvrtko)
v4:
- Make the bitmap size macro check the size of the .xehp field rather
than the containing union. (Tvrtko)
- Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether
slice or subslice ID exceed sseu->max_[sub]slices; various loops
in the driver are expected to exceed these, so we should just
silently return 'false.'
v5:
- Move XEHP_BITMAP_BITS() to the header so that we can also replace a
usage of I915_MAX_SS_FUSE_BITS in one of the inline functions.
(Bala)
- Change the local variable in intel_slicemask_from_xehp_dssmask() from
u16 to 'unsigned long' to make it a bit more future-proof.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-6-matthew.d.roper@intel.com
Matt Roper [Wed, 1 Jun 2022 15:07:23 +0000 (08:07 -0700)]
drm/i915/sseu: Don't try to store EU mask internally in UAPI format
Storing the EU mask internally in the same format the I915_QUERY
topology queries use makes the final copy_to_user() a bit simpler, but
makes the rest of the driver's SSEU more complicated and harder to
follow. Let's switch to an internal representation that's more natural:
Xe_HP platforms will be a simple array of u16 masks, whereas pre-Xe_HP
platforms will be a two-dimensional array, indexed by [slice][subslice].
We'll convert to the uapi format only when the query uapi is called.
v2:
- Drop has_common_ss_eumask. We waste some space repeating identical
EU masks for every single DSS, but the code is simpler without it.
(Tvrtko)
v3:
- Mask down EUs passed to sseu_set_eus at the callsite rather than
inside the function. (Tvrtko)
- Eliminate sseu->eu_stride and calculate it when needed. (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-5-matthew.d.roper@intel.com
Matt Roper [Wed, 1 Jun 2022 15:07:22 +0000 (08:07 -0700)]
drm/i915/sseu: Simplify gen11+ SSEU handling
Although gen11 and gen12 architectures supported the concept of multiple
slices, in practice all the platforms that were actually designed only
had a single slice (i.e., note the parameters to 'intel_sseu_set_info'
that we pass for each platform). We can simplify the code slightly by
dropping the multi-slice logic from gen11+ platforms.
v2:
- Promote drm_dbg to drm_WARN_ON if the slice fuse register reports
unexpected fusing. (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-4-matthew.d.roper@intel.com
Matt Roper [Wed, 1 Jun 2022 15:07:21 +0000 (08:07 -0700)]
drm/i915/xehp: Drop GETPARAM lookups of I915_PARAM_[SUB]SLICE_MASK
Slice/subslice/EU information should be obtained via the topology
queries provided by the I915_QUERY interface; let's turn off support for
the old GETPARAM lookups on Xe_HP and beyond where we can't return
meaningful values.
The slice mask lookup is meaningless since Xe_HP doesn't support
traditional slices (and we make no attempt to return the various new
units like gslices, cslices, mslices, etc.) here.
The subslice mask lookup is even more problematic; given the distinct
masks for geometry vs compute purposes, the combined mask returned here
is likely not what userspace would want to act upon anyway. The value
is also limited to 32-bits by the nature of the GETPARAM ioctl which is
sufficient for the initial Xe_HP platforms, but is unable to convey the
larger masks that will be needed on other upcoming platforms. Finally,
the value returned here becomes even less meaningful when used on
multi-tile platforms where each tile will have its own masks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # mesa
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-3-matthew.d.roper@intel.com
Matt Roper [Wed, 1 Jun 2022 15:07:20 +0000 (08:07 -0700)]
drm/i915/xehp: Use separate sseu init function
Xe_HP has enough fundamental differences from previous platforms that it
makes sense to use a separate SSEU init function to keep things
straightforward and easy to understand. We'll also add a has_xehp_dss
flag to the SSEU structure that will be used by other upcoming changes.
v2:
- Add has_xehp_dss flag
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-2-matthew.d.roper@intel.com
Stuart Summers [Fri, 27 May 2022 16:33:48 +0000 (09:33 -0700)]
drm/i915/pvc: Add initial PVC workarounds
Bspec: 64027
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220527163348.1936146-3-matthew.d.roper@intel.com
Matt Roper [Fri, 27 May 2022 16:33:47 +0000 (09:33 -0700)]
drm/i915/pvc: Extract stepping information from PCI revid
For PVC, the base die and compute tile have separate stepping values
that we need to track; we'll use the existing graphics_step field to
represent the compute tile stepping and add a new 'basedie_step' field.
Unlike past platforms, steppings for these components are represented by
specific bitfields within the PCI revision ID, and we shouldn't make
assumptions about the non-CT, non-BD bits staying 0. Let's update our
stepping code accordingly.
Bspec: 44484
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220527163348.1936146-2-matthew.d.roper@intel.com
Nirmoy Das [Wed, 25 May 2022 09:59:55 +0000 (11:59 +0200)]
drm/i915: Individualize fences before adding to dma_resv obj
_i915_vma_move_to_active() can receive > 1 fences for
multiple batch buffers submission. Because dma_resv_add_fence()
can only accept one fence at a time, change _i915_vma_move_to_active()
to be aware of multiple fences so that it can add individual
fences to the dma resv object.
v6: fix multi-line comment.
v5: remove double fence reservation for batch VMAs.
v4: Reserve fences for composite_fence on multi-batch contexts and
also reserve fence slots to composite_fence for each VMAs.
v3: dma_resv_reserve_fences is not cumulative so pass num_fences.
v2: make sure to reserve enough fence slots before adding.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5614
Fixes:
544460c33821 ("drm/i915: Multi-BB execbuf")
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525095955.15371-1-nirmoy.das@intel.com
Ashutosh Dixit [Wed, 25 May 2022 13:19:20 +0000 (06:19 -0700)]
drm/i915/gt: Fix memory leaks in per-gt sysfs
All kmalloc'd kobjects need a kobject_put() to free memory. For example in
previous code, kobj_gt_release() never gets called. The requirement of
kobject_put() now results in a slightly different code organization.
v2: s/gtn/gt/ (Andi)
Fixes:
b770bcfae9ad ("drm/i915/gt: create per-tile sysfs interface")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a6f6686517c85fba61a0c45097f5bb4fe7e257fb.1653484574.git.ashutosh.dixit@intel.com
Dale B Stimson [Wed, 25 May 2022 13:19:19 +0000 (06:19 -0700)]
drm/i915/gt: Add media RP0/RPn to per-gt sysfs
Retrieve RP0 and RPn freq for media IP from PCODE and display in per-gt
sysfs. This patch adds the following files to gt/gtN sysfs:
* media_RP0_freq_mhz
* media_RPn_freq_mhz
v2: Fixed commit author (Rodrigo)
v3: Convert to new uncore interface for pcode functions
v4: Adapt to intel_pcode.* function rename
v5: #include "intel_pcode.h" in alphabetical order (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45e34127a79e808f6582db8afb77f2f728a446e6.1653484574.git.ashutosh.dixit@intel.com
Ashutosh Dixit [Wed, 25 May 2022 13:19:18 +0000 (06:19 -0700)]
drm/i915/pcode: Init pcode on different gt's
Extend pcode initialization to pcode on different gt's.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4de1e4fd71a2971549c5cfb185412f190f15e235.1653484574.git.ashutosh.dixit@intel.com
Ashutosh Dixit [Wed, 25 May 2022 13:19:17 +0000 (06:19 -0700)]
drm/i915/gt: Add media freq factor to per-gt sysfs
Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
representation (corresponding to integer values of 0, 128 and 256
respectively).
Media freq factor is converted to media_ratio_mode for GuC. It is
programmed into GuC using H2G SLPC interface. It is retrieved from GuC
through a register read. A cached media_ratio_mode is maintained to
preserve set values across GuC resets.
This patch adds the following sysfs files to gt/gtN sysfs:
* media_freq_factor
* media_freq_factor.scale
v2: Minor wording change in drm_warn (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com
Alan Previn [Fri, 11 Mar 2022 00:43:11 +0000 (16:43 -0800)]
drm/i915/reset: Fix error_state_read ptr + offset use
Fix our pointer offset usage in error_state_read
when there is no i915_gpu_coredump but buf offset
is non-zero.
This fixes a kernel page fault can happen when
multiple tests are running concurrently in a loop
and one is producing engine resets and consuming
the i915 error_state dump while the other is
forcing full GT resets. (takes a while to trigger).
The dmesg call trace:
[ 5590.803000] BUG: unable to handle page fault for address:
ffffffffa0b0e000
[ 5590.803009] #PF: supervisor read access in kernel mode
[ 5590.803013] #PF: error_code(0x0000) - not-present page
[ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD
109de4067
PTE 0
[ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U
5.17.0-rc5-ups69-guc-err-capt-rev6+ #136
[ 5590.803033] Hardware name: Intel Corporation Alder Lake Client
Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00.
3031.A02.
2201171222 01/17/2022
[ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10
[ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1
48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3
66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4
c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20
72 7e 40 38 fe
[ 5590.803054] RSP: 0018:
ffffc90003a8fdf0 EFLAGS:
00010282
[ 5590.803057] RAX:
ffff888107ee9000 RBX:
ffff888108cb1a00
RCX:
0000000000000f8f
[ 5590.803061] RDX:
0000000000001000 RSI:
ffffffffa0b0e000
RDI:
ffff888107ee9071
[ 5590.803065] RBP:
0000000000000000 R08:
0000000000000001
R09:
0000000000000001
[ 5590.803069] R10:
0000000000000001 R11:
0000000000000002
R12:
0000000000000019
[ 5590.803073] R13:
0000000000174fff R14:
0000000000001000
R15:
ffff888107ee9000
[ 5590.803077] FS:
00007f62a99bee80(0000) GS:
ffff88849f880000(0000)
knlGS:
0000000000000000
[ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 5590.803085] CR2:
ffffffffa0b0e000 CR3:
000000010a1a8004
CR4:
0000000000770ee0
[ 5590.803089] PKRU:
55555554
[ 5590.803091] Call Trace:
[ 5590.803093] <TASK>
[ 5590.803096] error_state_read+0xa1/0xd0 [i915]
[ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0
[ 5590.803180] new_sync_read+0x116/0x1a0
[ 5590.803185] vfs_read+0x114/0x1b0
[ 5590.803189] ksys_read+0x63/0xe0
[ 5590.803193] do_syscall_64+0x38/0xc0
[ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 5590.803201] RIP: 0033:0x7f62aaea5912
[ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05
19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25
18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff
ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 5590.803213] RSP: 002b:
00007fff5b659ae8 EFLAGS:
00000246
ORIG_RAX:
0000000000000000
[ 5590.803218] RAX:
ffffffffffffffda RBX:
0000000000100000
RCX:
00007f62aaea5912
[ 5590.803221] RDX:
000000000008b000 RSI:
00007f62a8c4000f
RDI:
0000000000000006
[ 5590.803225] RBP:
00007f62a8bcb00f R08:
0000000000200010
R09:
0000000000101000
[ 5590.803229] R10:
0000000000000001 R11:
0000000000000246
R12:
0000000000000006
[ 5590.803233] R13:
0000000000075000 R14:
00007f62a8acb010
R15:
0000000000200000
[ 5590.803238] </TASK>
[ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper
drm_kms_helper syscopyarea sysfillrect sysimgblt
fb_sys_fops prime_numbers nfnetlink br_netfilter
overlay mei_pxp mei_hdcp x86_pkg_temp_thermal
coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep
snd_hda_core snd_pcm mei_me mei fuse ip_tables
x_tables crct10dif_pclmul e1000e crc32_pclmul ptp
i2c_i801 ghash_clmulni_intel i2c_smbus pps_core
[last unloa ded: ttm]
[ 5590.803277] CR2:
ffffffffa0b0e000
[ 5590.803280] ---[ end trace
0000000000000000 ]---
Fixes:
0e39037b3165 ("drm/i915: Cache the error string")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com
Matt Roper [Tue, 24 May 2022 23:59:06 +0000 (16:59 -0700)]
drm/i915/hwconfig: Future-proof platform checks
PVC also has a hwconfig table. Actually the current expectation is that
all future platforms will have hwconfig, so let's just change the
condition to an IP version check so that we don't need to keep updating
this for each new platform that shows up.
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220524235906.529771-1-matthew.d.roper@intel.com
Balasubramani Vivekanandan [Mon, 23 May 2022 07:51:16 +0000 (13:21 +0530)]
drm/i915/hwconfig: Report no hwconfig support on ADL-N
ADL-N being a subplatform of ADL-P, it lacks support for hwconfig
table. Explicit check added to skip ADL-N.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523075116.207677-1-balasubramani.vivekanandan@intel.com
Daniele Ceraolo Spurio [Wed, 11 May 2022 06:02:28 +0000 (23:02 -0700)]
drm/i915/guc: XEHPSDV and PVC do not use HuC
Disable HuC loading since it is not used on these platforms.
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-6-matthew.d.roper@intel.com
Matt Roper [Wed, 11 May 2022 06:02:27 +0000 (23:02 -0700)]
drm/i915/pvc: Add new BCS engines to GuC engine list
Initialize ADS system info to reflect the availability of new BCS
engines
Original-author: CQ Tang
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-5-matthew.d.roper@intel.com
Stuart Summers [Wed, 11 May 2022 06:02:26 +0000 (23:02 -0700)]
drm/i915/pvc: Remove additional 3D flags from PIPE_CONTROL
Although we already strip 3D-specific flags from PIPE_CONTROL
instructions when submitting to a compute engine, there are some
additional flags that need to be removed when the platform as a whole
lacks a 3D pipeline. Add those restrictions here.
v2:
- Replace LACKS_3D_PIPELINE checks with !HAS_3D_PIPELINE and add
has_3d_pipeline to all platforms except PVC. (Lucas)
Bspec: 47112
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-4-matthew.d.roper@intel.com
Matt Roper [Wed, 11 May 2022 06:02:25 +0000 (23:02 -0700)]
drm/i915/pvc: Add forcewake support
Add PVC's forcewake ranges.
v2:
- Drop replicated comment completely; move general cleanup of the
documentation to a separate patch.
Bspec: 67609
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-3-matthew.d.roper@intel.com
Matt Roper [Wed, 11 May 2022 06:02:24 +0000 (23:02 -0700)]
drm/i915/uncore: Reorganize and document shadow and forcewake tables
Let's reorganize some of the forcewake/shadow handling in intel_uncore.c
and consolidate the cargo-cult comments on each table into more general
comments that apply to all tables.
We'll probably move forcewake handling to its own dedicated file in the
near future and further enhance this with true kerneldoc. But this is a
good intermediate step to help clarify the behavior a bit.
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-2-matthew.d.roper@intel.com
Bommu Krishnaiah [Mon, 16 May 2022 08:20:15 +0000 (10:20 +0200)]
drm/i915: Update tiled blits selftest
Update the selftest to include Tile 4 mode and switch to Tile 4 on
platforms that supports Tile 4 but no Tile Y and vice versa.
Also switch to XY_FAST_COPY_BLT on platforms that supports it.
v4: update commit message to reflect the code changes properly.
v3: add a function to find X-tile availability for a platform.
v2: disable Tile X for iGPU in fastblit and
fix checkpath --strict warnings.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5879
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516082015.32020-1-nirmoy.das@intel.com
Tvrtko Ursulin [Mon, 23 May 2022 08:34:47 +0000 (09:34 +0100)]
Merge tag 'drm-intel-next-2022-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-gt-next
drm/i915 drm-intel-next -> drm-intel-gt-next cross-merge sync
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_rps.c
# drivers/gpu/drm/i915/i915_vma.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y1ywbh5y.fsf@intel.com
Dale B Stimson [Thu, 19 May 2022 08:57:32 +0000 (09:57 +0100)]
drm/i915/pcode: Add a couple of pcode helpers
Some dGfx pcode commands take additional sub-commands and parameters. Add a
couple of helpers to help formatting these commands to improve code
readability.
v2: Fixed commit author (Rodrigo)
v3: Function rename and convert to new uncore interface for pcode functions
Remove unnecessary #define's (Andi)
v4: Another function rename
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-3-tvrtko.ursulin@linux.intel.com
Ashutosh Dixit [Thu, 19 May 2022 08:57:31 +0000 (09:57 +0100)]
drm/i915/pcode: Extend pcode functions for multiple gt's
Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.
v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]
Ashutosh Dixit [Thu, 19 May 2022 08:57:30 +0000 (09:57 +0100)]
drm/i915: Introduce has_media_ratio_mode
Media ratio mode (the ability for media IP to work at a different frequency
from the GT) is available for a subset of dGfx platforms supporting
GuC/SLPC. Introduce 'has_media_ratio_mode' flag in intel_device_info to
identify these platforms and set it for XEHPSDV and DG2/ATS-M.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]
Tvrtko Ursulin [Thu, 19 May 2022 09:08:02 +0000 (10:08 +0100)]
Revert "drm/i915: Drop has_gt_uc from device info"
This reverts commit
222ff6db8a0dcb86f2bb65fc8656aec635a737a6.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-8-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 19 May 2022 09:08:01 +0000 (10:08 +0100)]
Revert "drm/i915: Drop has_rc6 from device info"
This reverts commit
218076abbcd647de46635d21331a34b814f90906.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-7-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 19 May 2022 09:08:00 +0000 (10:08 +0100)]
Revert "drm/i915: Drop has_reset_engine from device info"
This reverts commit
922abe4d19bd21b38298f3902674774b92a49293.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-6-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 19 May 2022 09:07:59 +0000 (10:07 +0100)]
Revert "drm/i915: Drop has_logical_ring_elsq from device info"
This reverts commit
b6411373d3954c8fe4617c27f90f773108b0ab03.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-5-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 19 May 2022 09:07:58 +0000 (10:07 +0100)]
Revert "drm/i915: Drop has_ddi from device info"
This reverts commit
efd01cd3c27636bc4840057a03839e54abaf11dc.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-4-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 19 May 2022 09:07:57 +0000 (10:07 +0100)]
Revert "drm/i915: Drop has_dp_mst from device info"
This reverts commit
eb86f645ab9b90c47de7ebe229feae7ac999421b.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-3-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 19 May 2022 09:07:56 +0000 (10:07 +0100)]
Revert "drm/i915: Drop has_psr from device info"
This reverts commit
b15a7357a84f091fde8ce35bf2fd494150ad4bd0.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-2-tvrtko.ursulin@linux.intel.com
Swathi Dhanavanthri [Tue, 17 May 2022 20:13:38 +0000 (13:13 -0700)]
drm/i915/dg2: Extend Wa_22010954014 to DG2-G11 and DG2-G12
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517201338.7291-1-swathi.dhanavanthri@intel.com
Swathi Dhanavanthri [Tue, 17 May 2022 21:29:05 +0000 (14:29 -0700)]
drm/i915/dg2: Add workaround
22014600077
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517212905.24212-1-swathi.dhanavanthri@intel.com
Borislav Petkov [Wed, 18 May 2022 11:33:15 +0000 (14:33 +0300)]
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
Fix:
In file included from <command-line>:0:0:
drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
and other build errors due to shift overflowing values.
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
v2 by Jani:
- Drop the i915_reg.h changes
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ruiqi GONG <gongruiqi1@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-2-jani.nikula@intel.com
Jani Nikula [Wed, 18 May 2022 11:33:14 +0000 (14:33 +0300)]
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to
-fsanitize=shift.
References: https://lore.kernel.org/r/
20220405151517.29753-12-bp@alien8.de
Reported-by: Borislav Petkov <bp@suse.de>
Reported-by: Ruiqi GONG <gongruiqi1@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-1-jani.nikula@intel.com
Andi Shyti [Tue, 10 May 2022 14:04:47 +0000 (16:04 +0200)]
drm/i915/gt: Fix use of static in macro mismatch
The INTEL_GT_RPS_SYSFS_ATTR was creating to different structures
but. When called with the "static" keyword this is affecting only
the first structure, while the second is created as non static.
Move the static keyword inside the macros to affect both the
structures.
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Fixes:
56a709cf77468 ("drm/i915/gt: Create per-tile RPS sysfs interfaces")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510140447.80200-1-andi.shyti@linux.intel.com
Maarten Lankhorst [Wed, 11 May 2022 11:52:19 +0000 (13:52 +0200)]
drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap
When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.
Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.
Fixes:
b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com
Ramalingam C [Mon, 2 May 2022 14:15:08 +0000 (19:45 +0530)]
uapi/drm/i915: Document memory residency and Flat-CCS capability of obj
Capture the impact of memory region preference list of the objects, on
their memory residency and Flat-CCS capability.
v2:
Fix the Flat-CCS capability of an obj with {lmem, smem} preference
list [Thomas]
v3:
Reworded the doc [Matt]
v4:
Fixed Typos and spelling mistakes [Tvrtko, Joonas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Matthew Auld <matthew.auld@intel.com>
cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
cc: Daniel Vetter <daniel.vetter@ffwll.ch>
cc: Jon Bloomfield <jon.bloomfield@intel.com>
cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
cc: Kenneth Graunke <kenneth@whitecape.org>
cc: mesa-dev@lists.freedesktop.org
cc: Jordan Justen <jordan.l.justen@intel.com>
cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502141508.2327-1-ramalingam.c@intel.com
Alan Previn [Sat, 7 May 2022 04:58:47 +0000 (21:58 -0700)]
drm/i915/guc: Remove unnecessary GuC err capture noise
GuC error capture blurts some debug messages about empty
register lists for certain register types on engines during
firmware initialization.
These are not errors or warnings, so get rid of them.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220507045847.862261-2-alan.previn.teres.alexis@intel.com
Nirmoy Das [Wed, 11 May 2022 15:37:46 +0000 (17:37 +0200)]
drm/i915: gracefully error out on platform with small-bar
Currently we just fatally crash during module load if we encounter
small-BAR configuration on DG2. We have most of the support already, but
we lack the final uAPI bits to tie it all together.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
[mauld: reword the commit and error message slightly]
Link: https://patchwork.freedesktop.org/patch/msgid/20220511153746.14142-3-nirmoy.das@intel.com
Nirmoy Das [Wed, 11 May 2022 15:37:45 +0000 (17:37 +0200)]
drm/i915: determine lmem_size properly
Determine lmem_size using ADDR_RANGE register so that lmem_setup()
works on platform with small-bar as well.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511153746.14142-2-nirmoy.das@intel.com
Nirmoy Das [Wed, 11 May 2022 15:37:44 +0000 (17:37 +0200)]
drm/i915: return -EIO on lmem setup failure
Caller of setup_lmem() ignores -ENODEV but failing
to setup lmem on dGPU isn't ignorable error.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511153746.14142-1-nirmoy.das@intel.com
Jouni Högander [Fri, 13 May 2022 14:28:11 +0000 (17:28 +0300)]
drm/i915: Ensure damage clip area is within pipe area
Current update area calculation is not handling situation where
e.g. cursor plane is fully or partially outside pipe area.
Fix this by checking damage area against pipe_src area using
drm_rect_intersect.
v2: Set x1 and x2 in damaged_area initialization
v3: Move drm_rect_intersect into clip_area_update
v4: draw_area -> pipe_src
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5440
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-3-jouni.hogander@intel.com
Jouni Högander [Fri, 13 May 2022 14:28:10 +0000 (17:28 +0300)]
drm/i915/psr: Use full update In case of area calculation fails
Currently we have some corner cases where area calculation fails. For
these sel fetch area calculation ends up having update area as y1 = 0,
y2 = 4. Instead of these values safer option is full update.
One of such for example is big fb with offset. We don't have usable
offset in psr2_sel_fetch_update. Currently it's open what is the
proper way to fix this corner case. Use full update for now.
v2: Commit message modified
v3: Print out debug info once when area calculation fails
v4: Use drm_info_once
v5: pipeA -> "pipe %c", pipe_name(crtc-pipe)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-2-jouni.hogander@intel.com
Anshuman Gupta [Wed, 11 May 2022 13:04:54 +0000 (18:34 +0530)]
drm/i915: Use drm_dbg for rpm logging
RPM suspend/resume also supported on gfx platforms which doesn't have
kms support and even on platforms without any connected display panel.
There is no good reason to log rpm suspend/resume debug message with
drm_dbg_kms() therefore changing it to drm_dbg().
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511130455.22028-1-anshuman.gupta@intel.com
Vinay Belgaumkar [Fri, 6 May 2022 05:41:42 +0000 (22:41 -0700)]
drm/i915/guc/rc: Use i915_probe_error instead of drm_error
To avoid false positives in error injection cases.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506054142.5025-1-vinay.belgaumkar@intel.com
Jani Nikula [Thu, 12 May 2022 16:16:38 +0000 (19:16 +0300)]
drm/i915/audio: fix audio code enable/disable pipe logging
Need to use pipe_name(pipe) instead of pipe directly.
Fixes:
1f31e35f2e88 ("drm/i915/audio: unify audio codec enable/disable debug logging")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com
Nathan Chancellor [Fri, 13 May 2022 07:51:36 +0000 (08:51 +0100)]
drm/i915: Fix CFI violation with show_dynamic_id()
When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
callback to kobj_attr_show(). kobj_attr_show() uses container_of() to
get the ->show() callback from the attribute it was passed, meaning the
->show() callback needs to be the same type as the ->show() callback in
'struct kobj_attribute'.
However, show_dynamic_id() has the type of the ->show() callback in
'struct device_attribute', which causes a CFI violation when opening the
'id' sysfs node under drm/card0/metrics. This happens to work because
the layout of 'struct kobj_attribute' and 'struct device_attribute' are
the same, so the container_of() cast happens to allow the ->show()
callback to still work.
Change the type of show_dynamic_id() to match the ->show() callback in
'struct kobj_attributes' and update the type of sysfs_metric_id to
match, which resolves the CFI violation.
Fixes:
f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com
Anusha Srivatsa [Wed, 11 May 2022 00:08:47 +0000 (17:08 -0700)]
drm/i915/dmc: Add MMIO range restrictions
Bspec has added some steps that check forDMC MMIO range before
programming them
v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)
BSpec: 49193
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com
Umesh Nerlige Ramappa [Tue, 26 Apr 2022 00:30:45 +0000 (17:30 -0700)]
i915/guc/reset: Make __guc_reset_context aware of guilty engines
There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.
(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.
(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.
In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.
Fixes:
eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com
Imre Deak [Tue, 10 May 2022 11:49:57 +0000 (14:49 +0300)]
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
Fix the following sparse warnings:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch
Fixes:
979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com
Anusha Srivatsa [Wed, 4 May 2022 20:22:12 +0000 (13:22 -0700)]
drm/i915/dmc: Load DMC on DG2
Add Support for DC states on Dg2.
v2: Add dc9 as the max supported DC states and disable DC5.
v3: set max_dc to 0. (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>(v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504202213.740200-2-anusha.srivatsa@intel.com
Lucas De Marchi [Thu, 5 May 2022 21:38:12 +0000 (14:38 -0700)]
drm/i915/pvc: read fuses for link copy engines
The new Link Copy engines in PVC may be fused off according to the
mslice_mask. Each bit of the MEML3_EN_MASK we read from the
GEN10_MIRROR_FUSE3 register disables a pair of link copy engines.
v2 (Tvrtko):
- Minor cosmetic changes: s/u8/unsigned long/, use instance local
variable. (Tvrtko)
Bspec: 44483
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-13-matthew.d.roper@intel.com
Lucas De Marchi [Thu, 5 May 2022 21:38:11 +0000 (14:38 -0700)]
drm/i915/pvc: skip all copy engines from aux table invalidate
As we have more copy engines now, mask all of them from aux table
invalidate.
v2 (MattR):
- Use I915_MAX_BCS to determine mask rather than hardcoding BCS8.
(Prathap)
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-12-matthew.d.roper@intel.com
Matt Roper [Thu, 5 May 2022 21:38:10 +0000 (14:38 -0700)]
drm/i915/pvc: Reset support for new copy engines
Add the reset support for new copy engines in PVC.
Bspec: 52549
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-11-matthew.d.roper@intel.com
Matt Roper [Thu, 5 May 2022 21:38:09 +0000 (14:38 -0700)]
drm/i915/pvc: Interrupt support for new copy engines
Add the interrupt handler support for new copy engines.
Bspec: 54030
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-10-matthew.d.roper@intel.com
Matt Roper [Thu, 5 May 2022 21:38:08 +0000 (14:38 -0700)]
drm/i915/pvc: Engine definitions for new copy engines
This patch adds the basic definitions needed to support
new copy engines. Also updating the cmd_info to accommodate
new engines, as the engine id's of legacy engines have been
changed.
v2:
- Add _BCS(n) definition, similar to other engines. (Tvrtko)
- Add I915_MAX_BCS definition, similar to other engnes. (Prathap)
- Move GVT change to avoid u16 overflow to its own patch. (Tvrtko)
Original-author: CQ Tang
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-9-matthew.d.roper@intel.com
Matt Roper [Thu, 5 May 2022 21:38:07 +0000 (14:38 -0700)]
drm/i915/gvt: Use intel_engine_mask_t for ring mask
When i915 adds additional PVC blitter instances (in an upcoming patch),
the definition of VECS0 will change from bit(10) to bit(18), causing
GVT's R_ALL mask to overflow the u16 storage that's currently used.
Let's replace the u16 with an intel_engine_mask_t to ensure we avoid
this.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-8-matthew.d.roper@intel.com
John Harrison [Thu, 5 May 2022 21:38:06 +0000 (14:38 -0700)]
drm/i915/pvc: Reduce stack usage in reset selftest with extra blitter engine
PVC adds extra blitter engines (in the following patch). The reset
selftest has a local array on the stack which is sized by the number
of engines. The increase pushes the size of this array to the point
where it trips the 'stack too large' compile warning. This patch takes
the allocation of the stack and makes it dynamic instead.
v2 (MattR):
- Minor cosmetic changes: re-sort definition and allocate using
kmalloc_array(). (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-7-matthew.d.roper@intel.com
Matt Roper [Thu, 5 May 2022 21:38:04 +0000 (14:38 -0700)]
drm/i915/pvc: Read correct RP_STATE_CAP register
The SoC registers, including RP_STATE_CAP, have moved to a new location
in GTTMMADR on Ponte Vecchio. We need to update the register offset
accordingly.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-5-matthew.d.roper@intel.com
Ayaz A Siddiqui [Thu, 5 May 2022 21:38:03 +0000 (14:38 -0700)]
drm/i915/pvc: Define MOCS table for PVC
v2 (MattR):
- Clarify comment above RING_CMD_CCTL programming.
- Remove bspec reference from field definition. (Lucas)
- Add WARN if we try to use a (presumably uninitialized) wb_index of 0.
On most platforms 0 is an invalid MOCS entry and even on the ones
where it isn't, it isn't the right setting for wb_index. (Lucas)
Bspec: 45101, 72161
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-4-matthew.d.roper@intel.com
Lucas De Marchi [Tue, 3 May 2022 06:15:56 +0000 (23:15 -0700)]
drm/i915/gem: Make drop_pages() return bool
Commit
e4e806253003 ("drm/i915: Change shrink ordering to use locking
around unbinding.") changed the return type to int without changing the
return values or their meaning to "0 is success". Move it back to
boolean.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503061556.513175-1-lucas.demarchi@intel.com
Tvrtko Ursulin [Fri, 29 Apr 2022 10:04:14 +0000 (11:04 +0100)]
drm/i915: Only setup private tmpfs mount when needed and fix logging
If i915 does not want to use huge pages there is a) no point in setting up
the private mount and b) should former fail, it is misleading to log THP
support is disabled in the caller, which does not even know if callee
tried to enable it.
Fix both by restructuring the flow in i915_gemfs_init and at the same time
note the failure to set it up in all cases.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429100414.647857-2-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Fri, 29 Apr 2022 10:04:13 +0000 (11:04 +0100)]
drm/i915: Enable THP on Icelake and beyond
We have a statement from HW designers that the GPU read regression when
using 2M pages was fixed from Icelake onwards, which was also confirmed
by bencharking Eero did last year:
"""
When IOMMU is disabled, enabling THP causes following perf changes on
TGL-H (GT1):
10-15% SynMark Batch[0-3]
5-10% MemBW GPU texture, SynMark ShMapVsm
3-5% SynMark TerrainFly* + Geom* + Fill* + CSCloth + Batch4
1-3% GpuTest Triangle, SynMark TexMem* + DeferredAA + Batch[5-7]
+ few others
-7% MemBW GPU blend
In the above 3D benchmark names, * means all the variants of tests with
the same prefix. For example "SynMark TexMem*", means both TexMem128 &
TexMem512 tests in the synthetic (Intel internal) SynMark test suite.
In the (public, but proprietary) GfxBench & GLB(enchmark) test suites,
there are both onscreen and offscreen variants of each test. Unless
explicitly stated otherwise, numbers are for both variants.
All tests are run with FullHD monitor. All tests are fullscreen except
for GLB and GpuTest ones, which are run in 1/2 screen window (GpuTest
triangle is run both in fullscreen and 1/2 screen window).
"""
Since the only regression is MemBW GPU blend, against many more gains,
it sounds it is time to enable THP on Gen11+.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/430
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429100414.647857-1-tvrtko.ursulin@linux.intel.com
Jani Nikula [Wed, 4 May 2022 18:37:15 +0000 (21:37 +0300)]
drm/i915: remove single-use GEM_DEBUG_EXEC()
Reduce the magic of what's going on in GEM_DEBUG_EXEC() by expanding it
inline and being explicit about it. It's as single use case anyway, so
the macro feels overkill.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-2-jani.nikula@intel.com
Jani Nikula [Wed, 4 May 2022 18:37:14 +0000 (21:37 +0300)]
drm/i915: remove unused GEM_DEBUG_DECL() and GEM_DEBUG_BUG_ON()
There are already too many choices here, take away the unused ones.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-1-jani.nikula@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:24 +0000 (12:35 -0700)]
drm/i915: Drop has_psr from device info
No need to have this parameter in intel_device_info struct
as all platforms with display version 9 or newer has this feature.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-7-jose.souza@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:23 +0000 (12:35 -0700)]
drm/i915: Drop has_dp_mst from device info
No need to have this parameter in intel_device_info struct
as the requirement to support it is the DDI support.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-6-jose.souza@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:22 +0000 (12:35 -0700)]
drm/i915: Drop has_ddi from device info
No need to have this parameter in intel_device_info struct
as all platforms with display version 9 or newer, haswell or broadwell
supports it.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-5-jose.souza@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:21 +0000 (12:35 -0700)]
drm/i915: Drop has_logical_ring_elsq from device info
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 11 or newer has this feature.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-4-jose.souza@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:20 +0000 (12:35 -0700)]
drm/i915: Drop has_reset_engine from device info
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 7 or newer can reset engines.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-3-jose.souza@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:19 +0000 (12:35 -0700)]
drm/i915: Drop has_rc6 from device info
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 6 or newer have software
support for this feature.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-2-jose.souza@intel.com
José Roberto de Souza [Thu, 5 May 2022 19:35:18 +0000 (12:35 -0700)]
drm/i915: Drop has_gt_uc from device info
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 9 or newer has graphics
microcontroller.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-1-jose.souza@intel.com
YueHaibing [Fri, 6 May 2022 03:26:52 +0000 (11:26 +0800)]
drm/i915/gt: Fix build error without CONFIG_PM
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’:
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration]
276 | u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Move sysfs_gt_attribute_* macros out of #ifdef block to fix this.
Fixes:
56a709cf7746 ("drm/i915/gt: Create per-tile RPS sysfs interfaces")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506032652.1856-1-yuehaibing@huawei.com
Tvrtko Ursulin [Thu, 5 May 2022 11:00:07 +0000 (12:00 +0100)]
drm/i915: Don't use DRM_DEBUG_WARN_ON for ring unexpectedly not idle
DRM_DEBUG_WARN_ON should only be used when we are certain CI is guaranteed
to exercise a certain code path, so in case of values coming from MMIO
reads we cannot be sure CI will have all the possible SKUs and parts, or
that it will catch all possible error conditions. Use drm_warn instead.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505110007.943449-2-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 5 May 2022 11:00:06 +0000 (12:00 +0100)]
drm/i915: Don't use DRM_DEBUG_WARN_ON for unexpected l3bank/mslice config
DRM_DEBUG_WARN_ON should only be used when we are certain CI is guaranteed
to exercise a certain code path, so in case of values coming from MMIO
reads we cannot be sure CI will have all the possible SKUs and parts.
Use drm_warn instead and move logging to init phase while at it.
v2:
* GEM_WARN_ON in intel_gt_get_valid_steering.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505110007.943449-1-tvrtko.ursulin@linux.intel.com
Daniele Ceraolo Spurio [Wed, 4 May 2022 20:48:16 +0000 (13:48 -0700)]
drm/i915/huc: Don't fail the probe if HuC init fails
The previous patch introduced new failure cases in the HuC init flow
that can be hit by simply changing the config, so we want to avoid
failing the probe in those scenarios. HuC load failure is already
considered a non-fatal error and we have a way to report to userspace
if the HuC is not available via a dedicated getparam, so no changes
in expectation there.
The error message in the HuC init code has also been lowered to info to
avoid throwing error message for an expected behavior.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-5-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Wed, 4 May 2022 20:48:15 +0000 (13:48 -0700)]
drm/i915/huc: Prepare for GSC-loaded HuC
HuC loading via GSC is performed via a PXP command sent through the mei
modules, so we need both MEI_GSC and MEI_PXP to be available. Given that
the GSC will do both the transfer and the authentication, the legacy HuC
loading paths can be safely skipped.
Also note that the GSC-loaded HuC survives GT reset.
v2: move the huc_is_authenticated() function to this patch.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-4-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Wed, 4 May 2022 20:48:14 +0000 (13:48 -0700)]
drm/i915/huc: Add fetch support for gsc-loaded HuC binary
On newer platforms (starting DG2 G10 B-step and G11 A-step), ownership of
HuC loading has been moved from the GuC to the GSC. As part of the
change, the header format of the HuC binary has been updated and does not
match the GuC anymore. The GSC will perform all the required checks on
the binary size, so we only need to check that the version matches.
Note that since we still haven't added any gsc-loaded FWs, the
loaded_via_gsc variable will always be kept to its initialization value
of zero.
v2: Add a note about loaded_via_gsc being zero (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-3-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Wed, 4 May 2022 20:48:13 +0000 (13:48 -0700)]
drm/i915/huc: drop intel_huc_is_authenticated
The function name is confusing, because it doesn't check the actual auth
status in HW but the SW status. Given that there is only one user (the
huc_auth function itself), just get rid of it and use the FW status
checker directly.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-2-daniele.ceraolospurio@intel.com
Matthew Brost [Wed, 4 May 2022 23:46:36 +0000 (16:46 -0700)]
drm/i915/guc: Support programming the EU priority in the GuC descriptor
In GuC submission mode the EU priority must be updated by the GuC rather
than the driver as the GuC owns the programming of the context descriptor.
Given that the GuC code uses the GuC priorities, we can't use a generic
function using i915 priorities for both execlists and GuC submission.
The existing function has therefore been pushed to the execlists
back-end while a new one has been added for GuC.
v2: correctly use the GuC prio.
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504234636.2119794-1-daniele.ceraolospurio@intel.com
Ville Syrjälä [Wed, 4 May 2022 15:04:40 +0000 (18:04 +0300)]
drm/i915: Respect VBT seamless DRRS min refresh rate
Make sure our choice of downclock mode respects the VBT
seameless DRRS min refresh rate limit.
v2: s/vrefesh/vrefresh/ (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-10-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 4 May 2022 15:04:39 +0000 (18:04 +0300)]
drm/i915/bios: Parse the seamless DRRS min refresh rate
Extract the seamless DRRS min refresh rate from the VBT.
v2: Do a version check
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-9-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 4 May 2022 15:04:38 +0000 (18:04 +0300)]
drm/i915/bios: Refactor panel_type code
Make the panel type code a bit more abstract along the
lines of the source of the panel type. For the moment
we have three classes: OpRegion, VBT, fallback.
Well introduce another one shortly.
We can now also print out all the different panel types,
and indicate which one we ultimately selected. Could help
with debugging.
v2: Add .get_panel_type() vfunc (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-8-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 4 May 2022 15:04:37 +0000 (18:04 +0300)]
drm/i915/bios: Extract get_panel_type()
Pull the code to determine the panel type into its own set of
sane functions.
v2: rebase
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 4 May 2022 15:04:36 +0000 (18:04 +0300)]
drm/i915/bios: Assume panel_type==0 if the VBT has bogus data
Just assume panel_type==0 always if the VBT gives us bogus data.
We actually already do this everywhere else except in
parse_panel_options() since we just leave i915->vbt.panel_type
zeroed. This also seems to be what Windows does.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-6-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 4 May 2022 15:04:35 +0000 (18:04 +0300)]
drm/i915/bios: Document the mess around the LFP data tables
Document the fact that struct lvds_lfp_data_entry can't be used
directly and instead must be accessed via the data table pointers.
Also remove the bogus comment implying that there might be a
variable number of panel entries in the table. There are always
exactly 16.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-5-ville.syrjala@linux.intel.com