Kuogee Hsieh [Fri, 1 Jul 2022 15:47:16 +0000 (08:47 -0700)]
arm64: dta: qcom: sc7180: delete vdda-1p2 and vdda-0p9 from mdss_dp
Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1656690436-15221-1-git-send-email-quic_khsieh@quicinc.com
Abel Vesa [Thu, 30 Jun 2022 10:14:03 +0000 (13:14 +0300)]
arm64: dts: qcom: sdm845: Switch PSCI cpu idle states from PC to OSI
Switch from the flat PC idle states of sdm845 to OSI hierarchical idle
states. The exceptions are the cheza plaftorms, which need to remain with
PC idle states. So in order allow all the other platforms to switch,
while cheza platforms to remain the same, replace the PC idle states with
the OSI ones in the main SDM845 dtsi, and then override the inherited OSI
states with PC ones, delete inherited psci cpus nodes, domain idle states
and power domain properties.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220630101403.1888541-1-abel.vesa@linaro.org
David Heidelberg [Sun, 26 Jun 2022 18:32:46 +0000 (20:32 +0200)]
arm64: dts: qcom: extend scm compatible strings
First device specific compatible, then general one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626183247.142776-2-david@ixit.cz
Anton Bambura [Sun, 26 Jun 2022 16:45:38 +0000 (12:45 -0400)]
arm64: dts: qcom: add device tree for LG G7 and LG V35
Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.
Currently supported features:
- Display via simplefb (panel driver is WIP)
- Keys
- Micro SD card
- Modem (not tested much, but initialises)
- UFS (crashes during intensive workloads, may need quirks)
- USB in peripheral mode
Notable missing features:
- Enabling WiFi causes a remoteproc crash, so it's disabled here.
Needs to be debugged - ideas welcome!
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Tested-by: Gregari Ivanov <llamashere@posteo.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-2-newbie13xd@gmail.com
Dmitry Baryshkov [Mon, 20 Jun 2022 07:19:36 +0000 (10:19 +0300)]
arm64: dts: qcom: msm8996: add xo clock source to rpmcc
Add XO clock source to the RPM clock controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-5-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 20 Jun 2022 07:19:35 +0000 (10:19 +0300)]
arm64: dts: qcom: msm8996: add GCC's optional clock sources
Add missing GCC clock sources. This includes PCIe and USB PIPE and UFS
symbol clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 20 Jun 2022 07:19:34 +0000 (10:19 +0300)]
arm64: dts: qcom: msm8996: correct #clock-cells for QMP PHY nodes
The commit
82d61e19fccb ("arm64: dts: qcom: msm8996: Move '#clock-cells'
to QMP PHY child node") moved the '#clock-cells' properties to the child
nodes. However it missed the fact that the property must have been set
to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate
function. Also the mentioned commit didn't add '#clock-cells' properties
to second and third PCIe PHY nodes. Correct both these mistakes:
- Set '#clock-cells' to <0>,
- Add the property to pciephy_1 and pciephy_2 nodes.
Fixes:
82d61e19fccb ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-3-dmitry.baryshkov@linaro.org
Dylan Van Assche [Thu, 12 May 2022 05:44:39 +0000 (07:44 +0200)]
arm64: dts: qcom: sdm845-shift-axolotl: Enable pmi9889 LPG LED
Enables the RGB notification LED on the SHIFT 6mq (sdm845-shift-axolotl)
with the Qualcomm Light Pulse Generator bindings by Bjorn Andersson [1].
Patches are merged in for-next branch of linux-leds.
Tested these changes on the SHIFT 6mq.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git/commit/?h=for-next&id=
a8e53db46f19f67be6a26488aafb7d10c78e33bd
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Alexander Martinz <amartinz@shiftphones.com>
Tested-by: Alexander Martinz <amartinz@shiftphones.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220512054439.13971-1-me@dylanvanassche.be
Marijn Suijten [Sun, 8 May 2022 10:03:35 +0000 (12:03 +0200)]
arm64: dts: qcom: sm6125: Add DLL/DDR configuration on SDHCI 1/2
These config values have been extracted from CodeLinaro's most recent
trinket/sm6125 tag:
https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/blob/LA.UM.9.11.r1-05600-NICOBAR.QSSI12.0/arch/arm64/boot/dts/qcom/trinket.dtsi
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-3-marijn.suijten@somainline.org
Marijn Suijten [Sun, 8 May 2022 10:03:34 +0000 (12:03 +0200)]
arm64: dts: qcom: sm6125: Append -state suffix to pinctrl nodes
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.
Fixes:
cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes:
82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-2-marijn.suijten@somainline.org
Marijn Suijten [Sun, 8 May 2022 10:03:33 +0000 (12:03 +0200)]
arm64: dts: qcom: sm6125: Move sdc2 pinctrl from seine-pdx201 to sm6125
Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.
The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.
As a drive-by cleanup, reorder bias- and drive-strength properties.
Fixes:
cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes:
82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org
Bjorn Andersson [Thu, 5 May 2022 02:27:06 +0000 (19:27 -0700)]
arm64: dts: qcom: db820c: Add user LEDs
The db820c has 4 "user LEDs", all connected to the PMI8994. The first
three are connected to the three current sinks provided by the TRILED
and the fourth is connected to MPP2.
By utilizing the DTEST bus the MPP is fed the control signal from the
fourth LPG block, providing a consistent interface to the user.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-5-bjorn.andersson@linaro.org
Bjorn Andersson [Thu, 5 May 2022 02:27:05 +0000 (19:27 -0700)]
arm64: dts: qcom: pmi8994: Define MPP block
The pmi8994 has 4 multi-purpose-pins, add these to the definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-4-bjorn.andersson@linaro.org
Bjorn Andersson [Thu, 5 May 2022 02:27:04 +0000 (19:27 -0700)]
arm64: dts: qcom: sdm845: Enable user LEDs on DB845c
The DB845c has 4 "user LEDs", the last one is already supported as it's
just wired to a gpio. Now that the LPG binding is in place we can wire
up the other 3 LEDs as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-3-bjorn.andersson@linaro.org
Bjorn Andersson [Thu, 5 May 2022 02:27:03 +0000 (19:27 -0700)]
arm64: dts: qcom: Add LPG to pm8916, pm8994, pmi8994 and pmi8998
Add PWM/LPG nodes to the PMICs currently supported by the binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-2-bjorn.andersson@linaro.org
Robert Foss [Wed, 6 Jul 2022 15:28:30 +0000 (17:28 +0200)]
arm64: dts: qcom: sm8350: Replace integers with rpmpd defines
Replace &rpmhpd power domain integers with their respective defines
in order to improve legibility.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706152830.2021197-1-robert.foss@linaro.org
Robert Foss [Wed, 6 Jul 2022 15:43:37 +0000 (17:43 +0200)]
arm64: dts: qcom: sm8350: Add DISPCC node
Add the dispcc clock-controller DT node for sm8350.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-6-robert.foss@linaro.org
Bjorn Andersson [Wed, 6 Jul 2022 20:16:51 +0000 (15:16 -0500)]
Merge branch '
20220706154337.2026269-1-robert.foss@linaro.org' into arm64-for-5.20
Vladimir Zapolskiy [Fri, 1 Jul 2022 06:26:22 +0000 (09:26 +0300)]
arm64: dts: qcom: sm8450: Add description of camera clock controller
The change adds description of Qualcomm SM8450 camera clock controller.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062622.2757831-3-vladimir.zapolskiy@linaro.org
Bjorn Andersson [Wed, 6 Jul 2022 20:22:54 +0000 (15:22 -0500)]
Merge branch '
20220701062622.2757831-2-vladimir.zapolskiy@linaro.org' into arm64-for-5.20
Vladimir Zapolskiy [Fri, 1 Jul 2022 06:26:21 +0000 (09:26 +0300)]
dt-bindings: clock: add QCOM SM8450 camera clock bindings
The change adds device tree bindings for camera clock controller
found on SM8450 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062622.2757831-2-vladimir.zapolskiy@linaro.org
Jonathan Marek [Wed, 6 Jul 2022 15:43:35 +0000 (17:43 +0200)]
dt-bindings: clock: Add Qcom SM8350 DISPCC bindings
Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
bindings. Update the documentation with the new compatible.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-4-robert.foss@linaro.org
Robert Foss [Wed, 6 Jul 2022 15:43:33 +0000 (17:43 +0200)]
dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8350 SoCs.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmityr.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-2-robert.foss@linaro.org
Yassine Oudjana [Thu, 21 Oct 2021 13:25:23 +0000 (13:25 +0000)]
arm64: dts: qcom: msm8996: Add interconnect support
Add interconnect providers for the multiple NoCs available on the platform,
and assign interconnects used by some blocks.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211021132329.234942-6-y.oudjana@protonmail.com
Bjorn Andersson [Sun, 3 Jul 2022 03:03:46 +0000 (22:03 -0500)]
Merge tag 'qcom-arm64-fixes-for-5.19' into arm64-for-5.20
This merges the 'qcom-arm64-fixes-for-5.19' tag into arm64-for-5.20 to
handle the merge conflict related to the header file changes in
sc7180-trogdor.
Stephen Boyd [Mon, 27 Jun 2022 21:28:02 +0000 (14:28 -0700)]
arm64: dts: qcom: sc7180-trogdor: Split out keyboard node and describe detachables
Trogdor devices that have a detachable keyboard still have a
non-detachable keyboard input device present because we include the
cros-ec-keyboard.dtsi snippet in the top-level sc7180-trogdor.dtsi file
that every variant board includes. We do this because the
keyboard-controller node also provides some buttons like the power
button and volume buttons. Unfortunately, this means we register a
keyboard input device that doesn't do anything on boards with a
detachable keyboard.
Change the node's compatible on detachables to the newly introduced
"google,cros-ec-keyb-switches" compatible to indicate that there are
only switches and no keyboard to register. Similarly, move the keyboard
include that defines the keyboard-controller node out of
sc7180-trogdor.dtsi to boards that actually have a keyboard so that the
matrix properties are not defined on boards with the switches
compatible. Future boards can either use the include approach or the
node definition approach to describe a keyboard with possible switches
or just some switches.
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627212802.3593012-1-swboyd@chromium.org
Robert Marko [Tue, 21 Jun 2022 12:06:42 +0000 (14:06 +0200)]
arm64: dts: qcom: ipq8074: fix NAND node name
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com
Dmitry Baryshkov [Mon, 20 Jun 2022 01:05:19 +0000 (04:05 +0300)]
arm64: dts: qcom: msm8916: add xo clocks to rpmcc and a53pll
Both a53pll and rpmcc make use of xo as a clock parent. Add it to the
respective device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620010519.1533364-1-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Fri, 17 Jun 2022 10:36:52 +0000 (13:36 +0300)]
arm64: dts: qcom: msm8996: add second DSI interface
Add device nodes for the DSI1, second DSI interface found on
MSM8996/APQ8096 platforms. For example on db820c it is routed to the
secondary HS expansion connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617103652.606250-1-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Wed, 15 Jun 2022 13:59:35 +0000 (16:59 +0300)]
arm64: dts: qcom: add mdp_clk clock to the MDSS device
Add MDP_CLK ("core") clock to the mdss device to allow MDSS driver to
access HW_REV/etc registers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220615135935.87381-5-dmitry.baryshkov@linaro.org
Emma Anholt [Tue, 14 Jun 2022 23:01:36 +0000 (16:01 -0700)]
arm64: dts: qcom: sm8250: Enable per-process page tables.
This is an SMMU for the adreno gpu, and adding this compatible lets
the driver use per-fd page tables, which are required for security
between GPU clients.
Signed-off-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Move arm,smmu-500 last, per Dmitry's request]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220614230136.3726047-2-emma@anholt.net
Lin, Meng-Bo [Fri, 10 Jun 2022 17:54:09 +0000 (17:54 +0000)]
arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen pinctrl
A3, A5 and most of the Samsung phones with MSM8916 SoC use GPIO pin 13 for
touchscreen interrupts. Add touchscreen pinctrl to a2015 common dtsi.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220610175332.104154-1-linmengbo0689@protonmail.com
Dmitry Baryshkov [Thu, 9 Jun 2022 12:23:50 +0000 (15:23 +0300)]
arm64: dts: qcom: msm8996: drop phy-names from HDMI device node
The HDMI driver doesn't use the phy-names to identify the PHY. Different
Qualcomm platforms have used different names for the PHY. So, we are
deprecating phy-names propertty of the HDMI device and dropping them
from existing DTs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220609122350.3157529-15-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:48 +0000 (19:18 +0200)]
arm64: dts: qcom: msm8994: add required ranges to OCMEM
The OCMEM bindings require ranges property.
Fixes:
9d511d0a7926 ("arm64: dts: qcom: msm8994: Add OCMEM node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-14-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:47 +0000 (19:18 +0200)]
arm64: dts: qcom: sdm845: add dedicated IMEM and syscon compatibles
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-13-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:46 +0000 (19:18 +0200)]
arm64: dts: qcom: sdm630: add dedicated IMEM and syscon compatibles
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-12-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:45 +0000 (19:18 +0200)]
arm64: dts: qcom: sc7280: add simple-mfd to IMEM
The IMEM node has children (PIL) which should be instantiated with
simple-mfd.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:44 +0000 (19:18 +0200)]
arm64: dts: qcom: sc7180: add dedicated IMEM and syscon compatibles
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:43 +0000 (19:18 +0200)]
arm64: dts: qcom: qcs404: add dedicated IMEM and syscon compatibles
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 17:18:42 +0000 (19:18 +0200)]
arm64: dts: qcom: use generic sram as name for imem and ocmem nodes
According to Devicetree specification, the device nodes should be
generic, reflecting the function of the device. The typical name for
memory regions is "sram".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 10:29:31 +0000 (12:29 +0200)]
arm64: dts: qcom: sdm845-db845c: add function and color to LED nodes
Add common LED properties - the function and color - to LED nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607102931.102805-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 10:29:30 +0000 (12:29 +0200)]
arm64: dts: qcom: sc7280-herobrine: add function to LED node
Add common LED property - the function - to LED node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607102931.102805-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 10:29:29 +0000 (12:29 +0200)]
arm64: dts: qcom: sc7180-trogdor: add function to LED node
Add common LED property - the function - to LED node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607102931.102805-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 10:29:28 +0000 (12:29 +0200)]
arm64: dts: qcom: qrb5165-rb5: add function and color to LED nodes
Add common LED properties - the function and color - to LED nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607102931.102805-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 10:29:27 +0000 (12:29 +0200)]
arm64: dts: qcom: apq8016-sbc: add function and color to LED nodes
Add common LED properties - the function and color - to LED nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607102931.102805-6-krzysztof.kozlowski@linaro.org
Vinod Koul [Mon, 6 Jun 2022 06:50:35 +0000 (12:20 +0530)]
arm64: dts: qcom: sm8250: Move qup-opp-table out of soc node
The soc node expects all the nodes to have unit addresses. The
qup-opp-table does not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5:
Warning (simple_bus_reg): /soc@0/qup-opp-table:
missing or empty reg/ranges property
Move the qup-opp-table out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Rebased ontop of Krzysztof's node name update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-4-vkoul@kernel.org
Vinod Koul [Mon, 6 Jun 2022 06:50:34 +0000 (12:20 +0530)]
arm64: dts: qcom: sm8350: Move qup-opp-tables out of soc node
The soc node expects all the nodes to have unit addresses. The
qup-opp-tables do not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8350.dtsi:640.46-657.5:
Warning (simple_bus_reg): /soc@0/qup-100mhz-opp-table:
missing or empty reg/ranges property
arch/arm64/boot/dts/qcom/sm8350.dtsi:659.46-676.5:
Warning (simple_bus_reg): /soc@0/qup-120mhz-opp-table:
missing or empty reg/ranges property
Move the qup-opp-tables out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Rebased ontop of Krzysztof's node name update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-3-vkoul@kernel.org
Vinod Koul [Mon, 6 Jun 2022 06:50:33 +0000 (12:20 +0530)]
arm64: dts: qcom: sm8450: rename interconnect nodes
clk-virt and mc-virt interconnect nodes were named interconnect@0 and
interconnect@1. That is incorrect as we don't have unit addresses 0/1
for these node.
This causes warning:
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unit_address_vs_reg): /interconnect@0:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:261.26-265.4:
Warning (unit_address_vs_reg): /interconnect@1:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unique_unit_address_if_enabled): /interconnect@0:
duplicate unit-address (also used in node /soc@0)
Rename the nodes to interconnect-0 and interconnect-1 to fix the
warning.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-2-vkoul@kernel.org
Alec Su [Mon, 6 Jun 2022 02:47:06 +0000 (02:47 +0000)]
arm64: dts: qcom: msm8996-xiaomi-natrium: Add support for Xiaomi Mi 5s Plus
Add the device tree for Xiaomi Mi 5s Plus (natrium).
Signed-off-by: Alec Su <ae40515@yahoo.com.tw>
Reviewed-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606024706.22861-3-ae40515@yahoo.com.tw
Alec Su [Mon, 6 Jun 2022 02:47:05 +0000 (02:47 +0000)]
dt-bindings: arm: qcom: Document xiaomi,natrium board
Document Xiaomi Mi 5s Plus (xiaomi-natrium) smartphone which is based on
Snapdragon 821 SoC.
Signed-off-by: Alec Su <ae40515@yahoo.com.tw>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606024706.22861-2-ae40515@yahoo.com.tw
Robert Marko [Sat, 4 Jun 2022 15:30:03 +0000 (17:30 +0200)]
arm64: dts: qcom: ipq6018: correct QUP peripheral labels
Current QUP peripheral labels like spi_0 and i2c_0 dont really tell what is
the exact QUP HW being used as there are actually 6 identical QUP HW blocks
for UART, SPI and I2C.
For example current i2c_0 label actually points to the QUP2 I2C HW.
This style of labeling does not follow what the rest of Qualcomm SoC-s use,
for example IPQ8074 which has the identical QUP blocks.
It also makes it really hard to add the missing QUP DT nodes as there are
multiple missing.
So utilize the same style as other Qualcomm SoC-s are using and update the
CP01 DTS as its the current sole user of them.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220604153003.55172-1-robimarko@gmail.com
Luca Weiss [Fri, 3 Jun 2022 09:47:10 +0000 (11:47 +0200)]
arm64: dts: qcom: sm8250: use constants for audio clocks
The use of these constants was removed during merging, probably because
the patches adding those defines and the dts patches were merged through
different trees.
Re-add them to make it clear which clocks are getting used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220603094710.64591-2-luca.weiss@fairphone.com
Luca Weiss [Fri, 3 Jun 2022 09:47:09 +0000 (11:47 +0200)]
arm64: dts: qcom: sdm845*: replace i2s reg with constant
Make it easier to understand what the reg in those nodes is by using the
constants provided by qcom,q6dsp-lpass-ports.h.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220603094710.64591-1-luca.weiss@fairphone.com
Manivannan Sadhasivam [Mon, 30 May 2022 08:08:41 +0000 (13:38 +0530)]
arm64: dts: qcom: sm8450: Fix the IRQ trigger type for remoteproc nodes
The watchdog IRQ trigger type should be EDGE_RISING. So fix all remoteproc
nodes.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220530080842.37024-3-manivannan.sadhasivam@linaro.org
Sireesh Kodali [Thu, 26 May 2022 14:17:40 +0000 (19:47 +0530)]
arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node
The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.
Fixes:
88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-3-sireeshkodali1@gmail.com
Markuss Broks [Mon, 23 May 2022 17:53:44 +0000 (20:53 +0300)]
arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
This patch adds device tree support for the VL53L0X ToF sensor
found on all Yoshino devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523175344.5845-6-markuss.broks@gmail.com
Sibi Sankar [Thu, 19 May 2022 16:47:03 +0000 (22:17 +0530)]
arm64: dts: qcom: sc7280: Add proxy interconnect requirements for modem
Add interconnects that are required to be proxy voted upon during modem
bootup on SC7280 SoCs.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652978825-5304-2-git-send-email-quic_sibis@quicinc.com
Krzysztof Kozlowski [Tue, 17 May 2022 07:01:13 +0000 (09:01 +0200)]
arm64: dts: qcom: sm8450: remove duplicated glink-edge interrupt
Specifying interrupts and interrupts-extended is not correct. Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:
sm8450-qrd.dtb: glink-edge: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-13-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 17 May 2022 07:01:12 +0000 (09:01 +0200)]
arm64: dts: qcom: sm8350: remove duplicated glink-edge interrupt
Specifying interrupts and interrupts-extended is not correct. Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:
sm8350-sony-xperia-sagami-pdx214.dtb: glink-edge: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-12-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 17 May 2022 07:01:11 +0000 (09:01 +0200)]
arm64: dts: qcom: sdm630: remove unneeded address/size cells in glink-edge
glink-edge node does not have children with unit addresses:
sdm630-sony-xperia-ganges-kirin.dtb: glink-edge: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 17 May 2022 07:01:10 +0000 (09:01 +0200)]
arm64: dts: qcom: ipq6018: add label to remoteproc node
glink-edge bindings require label:
ipq6018-cp01-c1.dtb: glink-edge: 'label' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-10-krzysztof.kozlowski@linaro.org
Bhupesh Sharma [Mon, 16 May 2022 06:31:55 +0000 (12:01 +0530)]
arm64: dts: qcom: Remove unused 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties
As Bjorn noted in [1], since the qmp phy driver doesn't
use the 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties
currently, let's remove them from the dts files as well.
Otherwise, it leads to the following '$ make dtbs_check'
warning(s):
sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+
If later on the driver support is added, we can add these properties
back to the dts files.
[1]. https://lore.kernel.org/linux-arm-msm/YmQhpsmiYJzR99LK@ripper/
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220516063155.1332683-5-bhupesh.sharma@linaro.org
Robert Marko [Sun, 15 May 2022 21:00:48 +0000 (23:00 +0200)]
arm64: dts: qcom: ipq8074: add USB power domains
Add USB power domains provided by GCC GDSCs.
Add the required #power-domain-cells to the GCC as well.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com
Bjorn Andersson [Sun, 3 Jul 2022 03:17:02 +0000 (22:17 -0500)]
Merge branch '
20220515210048.483898-8-robimarko@gmail.com' into arm64-for-5.20
Bhupesh Sharma [Sat, 14 May 2022 21:54:23 +0000 (03:24 +0530)]
arm64: dts: qcom: Fix 'reg-names' for sdhci nodes
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports a number of issues with
ordering of 'reg-names' as various possible combinations
are possible for different qcom SoC dts files.
Fix the same by updating the offending 'dts' files.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-6-bhupesh.sharma@linaro.org
Bhupesh Sharma [Sat, 14 May 2022 21:54:22 +0000 (03:24 +0530)]
arm64: dts: qcom: Fix ordering of 'clocks' & 'clock-names' for sdhci nodes
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports a number of issues with
ordering of 'clocks' & 'clock-names' for sdhci nodes:
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:0: 'iface' was expected
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:1: 'core' was expected
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:2: 'xo' was expected
Fix the same by updating the offending 'dts' files.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org
Bhupesh Sharma [Sat, 14 May 2022 21:54:20 +0000 (03:24 +0530)]
arm64: dts: qcom: sdm630: Fix 'interconnect-names' for sdhci nodes
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'interconnect-names' used for sdhci nodes.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-3-bhupesh.sharma@linaro.org
Bhupesh Sharma [Sat, 14 May 2022 21:54:19 +0000 (03:24 +0530)]
arm64: dts: qcom: Fix sdhci node names - use 'mmc@'
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'sdhci@' convention used for specifying the
sdhci nodes. The generic mmc bindings expect 'mmc@' format
instead.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[bjorn: Moved non-arm64 changes to separate commit]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org
Marijn Suijten [Wed, 11 May 2022 19:07:18 +0000 (21:07 +0200)]
arm64: dts: qcom: sdm630-nile: Add RGB status LED on the PM660L LPG
The entire Sony Nile and Ganges lineup utilize the first three channels
(the triled channels) of the LPG block for an RGB (battery) status and
notification indicator.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[bjorn: Dropped #address/#size-cells]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511190718.764445-4-marijn.suijten@somainline.org
Marijn Suijten [Wed, 11 May 2022 19:07:17 +0000 (21:07 +0200)]
arm64: dts: qcom: pm660l: Add LPG node
The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs. The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[bjorn: Dropped #address/size-cells]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511190718.764445-3-marijn.suijten@somainline.org
Andrey Konovalov [Sat, 11 Jun 2022 19:57:13 +0000 (22:57 +0300)]
arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
The current settings refer to "blsp_spi1" function which isn't defined.
For this reason an attempt to enable blsp1_spi1 interface results in
the probe failure below:
[ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
Fix this by making the functions used in qcs404.dtsi to match the contents
of drivers/pinctrl/qcom/pinctrl-qcs404.c.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220611195713.131597-1-andrey.konovalov@linaro.org
Dmitry Baryshkov [Thu, 5 May 2022 14:51:02 +0000 (17:51 +0300)]
arm64: dts: qcom: qrb5165-rb5: declare tri-led user leds
Qualcomm RB5 platform uses Light Pulse Generator tri-led block to drive
three green leds. Add device nodes defining those leds.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505145102.1432670-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 5 May 2022 14:51:01 +0000 (17:51 +0300)]
arm64: dts: qcom: pm8150l: add Light Pulse Generator device node
Add device node defining LPG/PWM block on PM8150L PMIC chip.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505145102.1432670-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 5 May 2022 14:51:00 +0000 (17:51 +0300)]
arm64: dts: qcom: pm8150b: add Light Pulse Generator device node
Add device node defining LPG/PWM block on PM8150B PMIC chip.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505145102.1432670-2-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Thu, 16 Jun 2022 00:53:17 +0000 (17:53 -0700)]
arm64: dts: qcom: align led node names with dtschema
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-24-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 16 Jun 2022 00:53:16 +0000 (17:53 -0700)]
arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
Nodes do not need explicit status=okay.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-23-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 16 Jun 2022 00:53:15 +0000 (17:53 -0700)]
arm64: dts: qcom: correct gpio-keys properties
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-22-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 16 Jun 2022 00:53:14 +0000 (17:53 -0700)]
arm64: dts: qcom: align gpio-key node names with dtschema
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-21-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 26 May 2022 20:42:47 +0000 (22:42 +0200)]
arm64: dts: qcom: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 21 May 2022 16:45:50 +0000 (18:45 +0200)]
arm64: dts: qcom: msm8998-mtp: correct board compatible
Add qcom,msm8998 SoC fallback to the board compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521164550.91115-12-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 21 May 2022 16:45:49 +0000 (18:45 +0200)]
arm64: dts: qcom: ipq6018-cp01-c1: fix Micron SPI NOR compatible
The proper compatible for Micron n25q128a11 SPI NOR flash should include
vendor-prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521164550.91115-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 5 May 2022 11:38:02 +0000 (13:38 +0200)]
arm64: dts: qcom: sdm630: correct QFPROM byte offsets
The NVMEM bindings expect that 'bits' property holds offset and size of
region within a byte, so it applies a constraint of <0, 7> for the
offset. Using 25 as HSTX trim offset is within 4-byte QFPROM word, but
outside of the byte:
sdm630-sony-xperia-nile-discovery.dtb: qfprom@780000: hstx-trim@240:bits:0:0: 25 is greater than the maximum of 7
sdm630-sony-xperia-nile-discovery.dtb: qfprom@780000: gpu-speed-bin@41a0:bits:0:0: 21 is greater than the maximum of 7
Align the offsets to match the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505113802.243301-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 5 May 2022 11:38:01 +0000 (13:38 +0200)]
arm64: dts: qcom: use dedicated QFPROM compatibles
Use dedicated compatibles for QFPROM on MSM8916, MSM8996, MSM8998,
QCS404 and SDM630 which is expected by the bindings:
msm8996-mtp.dtb: qfprom@74000: compatible:0: 'qcom,qfprom' is not one of ['qcom,apq8064-qfprom', ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505113802.243301-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 5 May 2022 15:47:02 +0000 (17:47 +0200)]
arm64: dts: qcom: correct SPMI WLED register range encoding
On PM660L, PMI8994 and PMI8998, the WLED has two address spaces and with
size-cells=0, they should be encoded as two separate items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505154702.422108-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 4 May 2022 13:19:15 +0000 (15:19 +0200)]
arm64: dts: qcom: add missing AOSS QMP compatible fallback
The AOSS QMP bindings expect all compatibles to be followed by fallback
"qcom,aoss-qmp" because all of these are actually compatible with each
other. This fixes dtbs_check warnings like:
sm8250-hdk.dtb: power-controller@c300000: compatible: ['qcom,sm8250-aoss-qmp'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220504131923.214367-6-krzysztof.kozlowski@linaro.org
Joseph S. Barrera III [Sun, 26 Jun 2022 01:39:06 +0000 (18:39 -0700)]
arm64: dts: qcom: sc7180: Add kingoftown dts files
Kingoftown is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.5.Ib62291487a664a65066d18a3e83c5428a6d2cc6c@changeid
Joseph S. Barrera III [Sun, 26 Jun 2022 01:39:05 +0000 (18:39 -0700)]
arm64: dts: qcom: sc7180: Add pazquel dts files
Pazquel is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.4.I41e2c2dc12961fe000ebc4d4ef6f0bc5da1259ea@changeid
Joseph S. Barrera III [Sun, 26 Jun 2022 01:39:04 +0000 (18:39 -0700)]
arm64: dts: qcom: sc7180: Add mrbland dts files
Mrbland is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.3.I71176ebf7e5aebddb211f00e805b32c08376d1be@changeid
Joseph S. Barrera III [Sun, 26 Jun 2022 01:39:03 +0000 (18:39 -0700)]
arm64: dts: qcom: sc7180: Add quackingstick dts files
Quackingstick is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.2.I0977b1a08830d0caa8bfb1bdedb4ecceac709a7f@changeid
Joseph S. Barrera III [Sun, 26 Jun 2022 01:39:02 +0000 (18:39 -0700)]
arm64: dts: qcom: sc7180: Add wormdingler dts files
Wormdingler is a trogdor-based board, shipping to customers as the
Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with the camera
(sc7180-trogdor-mipi-camera.dtsi) #include removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.1.Id769ddc5dbf570ccb511db96da59f97d08f75a9c@changeid
Gwendal Grignou [Thu, 23 Jun 2022 22:31:19 +0000 (15:31 -0700)]
arm64: dts: qcom: sc7280: Rename sar sensor labels
To ease matching configuration of sysfs attributes for particular
sensor, match label reported by iio 'label' attribute with the location
label generated by ChromeOS config tool.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220623223119.1858863-1-gwendal@chromium.org
Johan Hovold [Wed, 22 Jun 2022 13:26:17 +0000 (15:26 +0200)]
arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree
Add an initial devicetree for the Lenovo Thinkpad X13s with support for
USB, backlight, keyboard, touchpad, touchscreen (to be verified), PMICs
and remoteprocs.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220622132617.24604-1-johan+linaro@kernel.org
Bjorn Andersson [Wed, 29 Jun 2022 04:14:38 +0000 (21:14 -0700)]
arm64: dts: qcom: add SA8540P and ADP
Introduce the Qualcomm SA8540P automotive platform and the SA8295P ADP
development board.
The SA8540P and SC8280XP are fairly similar, so the SA8540P is built
ontop of the SC8280XP dtsi to reduce duplication. As more advanced
features are integrated this might be re-evaluated.
This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
regulators, debug UART, PMICs, remoteprocs (NSPs crashes shortly after
booting) and USB.
The SA8295P ADP contains four PM8450 PMICs, which according to their
revid are compatible with PM8150. They are defined within the ADP for
now, to avoid creating additional .dtsi files for PM8150 with just
addresses changed - and to allow using the labels from the schematics.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-6-bjorn.andersson@linaro.org
Bjorn Andersson [Wed, 29 Jun 2022 04:14:37 +0000 (21:14 -0700)]
arm64: dts: qcom: sc8280xp: Add reference device
Add basic support for the SC8280XP reference device, which allows it to
boot to a shell (using EFIFB) with functional storage (UFS), USB,
keyboard, touchpad, touchscreen, backlight and remoteprocs.
The PMICs are, per socinfo, reused from other platforms. But given that
the address of the PMICs doesn't match other cases and that it's
desirable to label things according to the schematics a new dtsi file is
created to represent the reference combination of PMICs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-5-bjorn.andersson@linaro.org
Robert Marko [Sun, 15 May 2022 21:00:45 +0000 (23:00 +0200)]
dt-bindings: clock: qcom: ipq8074: add USB GDSCs
Add bindings for the USB GDSCs found in IPQ8074 GCC.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-8-robimarko@gmail.com
Bjorn Andersson [Wed, 29 Jun 2022 04:14:36 +0000 (21:14 -0700)]
arm64: dts: qcom: add SC8280XP platform
Introduce initial support for the Qualcomm SC8280XP platform, aka 8cx
Gen 3. This initial contribution supports SMP, CPUfreq, CPU cluster
idling, GCC, TLMM, SMMU, RPMh regulators, power-domains and clocks,
interconnects, some QUPs, UFS, remoteprocs, USB, watchdog, LLCC and
tsens.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-4-bjorn.andersson@linaro.org
Bjorn Andersson [Wed, 29 Jun 2022 04:14:35 +0000 (21:14 -0700)]
dt-bindings: mailbox: qcom-ipcc: Add NSP1 client
Add a client for the NSP1 found in some recent Qualcomm platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-3-bjorn.andersson@linaro.org
Bjorn Andersson [Wed, 29 Jun 2022 04:14:34 +0000 (21:14 -0700)]
dt-bindings: arm: qcom: Document additional sc8280xp devices
Add the CRD (Compute Reference Design?) and the Lenovo Thinkpad X13s to
the valid device compatibles found on the sc8280xp platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-2-bjorn.andersson@linaro.org
Sibi Sankar [Mon, 23 May 2022 07:00:58 +0000 (12:30 +0530)]
arm64: dts: qcom: sm8450: Add interconnect requirements for SCM
Add interconnects requirements for the SCM interface on SM8450 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653289258-17699-4-git-send-email-quic_sibis@quicinc.com
Dmitry Baryshkov [Sat, 21 May 2022 20:27:08 +0000 (23:27 +0300)]
arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support
The IFC6560 is a board from Inforce Computing, built around the SDA660
SoC. This patch describes core clocks, some regulators from the two
PMICs, debug uart, storage, bluetooth and audio DSP remoteproc.
The regulator settings are inherited from prior work by Konrad Dybcio
and AngeloGioacchino Del Regno.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-12-dmitry.baryshkov@linaro.org