Janis Schoetterl-Glausch [Fri, 28 Jan 2022 14:06:43 +0000 (15:06 +0100)]
KVM: s390: Return error on SIDA memop on normal guest
commit
2c212e1baedcd782b2535a3f86bc491977677c0e upstream.
Refuse SIDA memops on guests which are not protected.
For normal guests, the secure instruction data address designation,
which determines the location we access, is not under control of KVM.
Fixes:
19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer)
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anshuman Khandual [Tue, 25 Jan 2022 14:20:31 +0000 (19:50 +0530)]
arm64: Add Cortex-A510 CPU part definition
commit
53960faf2b731dd2f9ed6e1334634b8ba6286850 upstream.
Add the CPU Partnumbers for the new Arm designs.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 27 Jan 2022 07:16:38 +0000 (08:16 +0100)]
moxart: fix potential use-after-free on remove path
commit
bd2db32e7c3e35bd4d9b8bbff689434a50893546 upstream.
It was reported that the mmc host structure could be accessed after it
was freed in moxart_remove(), so fix this by saving the base register of
the device and using it instead of the pointer dereference.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Xin Xiong <xiongx18@fudan.edu.cn>
Cc: Xin Tan <tanxin.ctf@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: linux-mmc@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Reported-by: whitehat002 <hackyzh002@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 8 Feb 2022 17:34:14 +0000 (18:34 +0100)]
Linux 5.15.22
Link: https://lore.kernel.org/r/20220207103802.280120990@linuxfoundation.org
Link: https://lore.kernel.org/r/20220207133903.595766086@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Mon, 24 Jan 2022 21:09:15 +0000 (22:09 +0100)]
selftests: netfilter: check stateless nat udp checksum fixup
commit
aad51ca71ad83273e8826d6cfdcf53c98748d1fa upstream.
Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.
On kernels without
commit
4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:
cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)
On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Wed, 26 Jan 2022 11:54:54 +0000 (12:54 +0100)]
selftests: nft_concat_range: add test for reload with no element add/del
commit
eda0cf1202acf1ef47f93d8f92d4839213431424 upstream.
Add a specific test for the reload issue fixed with
commit
23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").
Add to set, then flush set content + restore without other add/remove in
the transaction.
On kernels before the fix, this test case fails:
net,mac with reload [FAIL]
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Li [Wed, 19 Jan 2022 01:04:32 +0000 (09:04 +0800)]
gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()
commit
9f51ce0b9e73f83bab2442b36d5e247a81bd3401 upstream.
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'irqn', so making 'irqn' an int.
Eliminate the following coccicheck warning:
./drivers/gpio/gpio-mpc8xxx.c:391:5-21: WARNING: Unsigned expression
compared with zero: mpc8xxx_gc -> irqn < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes:
0b39536cc699 ("gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Li [Wed, 19 Jan 2022 01:04:31 +0000 (09:04 +0800)]
gpio: idt3243x: Fix an ignored error return from platform_get_irq()
commit
7c1cf55577782725ea2bc24687767c8fe8e57486 upstream.
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'parent_irq', so making 'parent_irq' an int.
Eliminate the following coccicheck warning:
./drivers/gpio/gpio-idt3243x.c:167:6-16: WARNING: Unsigned expression
compared with zero: parent_irq < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes:
30fee1d7462a ("gpio: idt3243x: Fix IRQ check in idt_gpio_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 12 Feb 2020 14:04:23 +0000 (11:04 -0300)]
tools include UAPI: Sync sound/asound.h copy with the kernel sources
commit
4f2492731ada9d702ffdfaa6ec1ff64820a1664c upstream.
Picking the changes from:
06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Thu, 3 Feb 2022 03:31:03 +0000 (22:31 -0500)]
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
commit
2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream.
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes:
4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arınç ÜNAL [Sat, 29 Jan 2022 06:27:04 +0000 (09:27 +0300)]
net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY
commit
4223f86512877b04c932e7203648b37eec931731 upstream.
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.
A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.
Fixes:
b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Yin [Wed, 26 Jan 2022 06:31:46 +0000 (14:31 +0800)]
ext4: fix incorrect type issue during replay_del_range
commit
8fca8a2b0a822f7936130af7299d2fd7f0a66714 upstream.
should not use fast commit log data directly, add le32_to_cpu().
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range")
Cc: stable@kernel.org
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ritesh Harjani [Mon, 17 Jan 2022 12:11:49 +0000 (17:41 +0530)]
ext4: fix error handling in ext4_fc_record_modified_inode()
commit
cdce59a1549190b66f8e3fe465c2b2f714b98a94 upstream.
Current code does not fully takes care of krealloc() error case, which
could lead to silent memory corruption or a kernel bug. This patch
fixes that.
Also it cleans up some duplicated error handling logic from various
functions in fast_commit.c file.
Reported-by: luo penghao <luo.penghao@zte.com.cn>
Suggested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ritesh Harjani [Mon, 17 Jan 2022 12:11:47 +0000 (17:41 +0530)]
ext4: fix error handling in ext4_restore_inline_data()
commit
897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.
While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.
<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!
<code snip>
212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
213 void *buffer, loff_t pos, unsigned int len)
214 {
<...>
223 BUG_ON(!EXT4_I(inode)->i_inline_off);
224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).
[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Yin [Mon, 10 Jan 2022 03:51:41 +0000 (11:51 +0800)]
ext4: modify the logic of ext4_mb_new_blocks_simple
commit
31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream.
For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.
Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Yin [Mon, 10 Jan 2022 03:51:40 +0000 (11:51 +0800)]
ext4: prevent used blocks from being allocated during fast commit replay
commit
599ea31d13617c5484c40cdf50d88301dc351cfc upstream.
During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.
Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Mon, 24 Jan 2022 18:55:03 +0000 (21:55 +0300)]
EDAC/xgene: Fix deferred probing
commit
dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.
The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
[ bp: Massage commit message. ]
Fixes:
0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Mon, 24 Jan 2022 18:55:02 +0000 (21:55 +0300)]
EDAC/altera: Fix deferred probing
commit
279eb8575fdaa92c314a54c0d583c65e26229107 upstream.
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
[ bp: Massage commit message. ]
Fixes:
71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Thu, 27 Jan 2022 11:32:51 +0000 (12:32 +0100)]
x86/perf: Default set FREEZE_ON_SMI for all
commit
a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream.
Kyle reported that rr[0] has started to malfunction on Comet Lake and
later CPUs due to EFI starting to make use of CPL3 [1] and the PMU
event filtering not distinguishing between regular CPL3 and SMM CPL3.
Since this is a privilege violation, default disable SMM visibility
where possible.
Administrators wanting to observe SMM cycles can easily change this
using the sysfs attribute while regular users don't have access to
this file.
[0] https://rr-project.org/
[1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform"
at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the
end of page 5.
Reported-by: Kyle Huey <me@kylehuey.com>
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tristan Hume [Thu, 27 Jan 2022 22:08:06 +0000 (17:08 -0500)]
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
commit
1d9093457b243061a9bba23543c38726e864a643 upstream.
Add a check for !buf->single before calling pt_buffer_region_size in a
place where a missing check can cause a kernel crash.
Fixes a bug introduced by commit
670638477aed ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a
support for PT single-range output mode. Since that commit if a PT
stop filter range is hit while tracing, the kernel will crash because
of a null pointer dereference in pt_handle_status due to calling
pt_buffer_region_size without a ToPA configured.
The commit which introduced single-range mode guarded almost all uses of
the ToPA buffer variables with checks of the buf->single variable, but
missed the case where tracing was stopped by the PT hardware, which
happens when execution hits a configured stop filter.
Tested that hitting a stop filter while PT recording successfully
records a trace with this patch but crashes without this patch.
Fixes:
670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode")
Signed-off-by: Tristan Hume <tristan@thume.ca>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Rogers [Sat, 5 Feb 2022 01:09:41 +0000 (17:09 -0800)]
perf stat: Fix display of grouped aliased events
[ Upstream commit
b2b1aa73ade982c175ac926a1fd34e76ad628b94 ]
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
Performance counter stats for 'system wide':
CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,749,060 ns duration_time
1.
000749060 seconds time elapsed
```
After:
```
Performance counter stats for 'system wide':
CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,464,828 ns duration_time
1.
000464828 seconds time elapsed
```
Fixes:
3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Asaf Yaffe <asaf.yaffe@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marco Elver [Mon, 31 Jan 2022 10:34:05 +0000 (11:34 +0100)]
perf: Copy perf_event_attr::sig_data on modification
[ Upstream commit
3c25fc97f5590060464cabfa25710970ecddbc96 ]
The intent has always been that perf_event_attr::sig_data should also be
modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is
observable by user space if SIGTRAP on events is requested.
Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies
relevant breakpoint-related attributes in hw_breakpoint_copy_attr().
This misses copying perf_event_attr::sig_data.
Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a
helper to copy generic event-type-independent attributes on
modification.
Fixes:
97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Tue, 1 Feb 2022 13:29:23 +0000 (13:29 +0000)]
kvm/arm64: rework guest entry logic
[ Upstream commit
8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ]
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state
(EQS) by calling guest_enter_irqoff(), and unmasked IRQs prior to
exiting the EQS by calling guest_exit(). As the IRQ entry code will not
wake RCU in this case, we may run the core IRQ code and IRQ handler
without RCU watching, leading to various potential problems.
Additionally, we do not inform lockdep or tracing that interrupts will
be enabled during guest execution, which caan lead to misleading traces
and warnings that interrupts have been enabled for overly-long periods.
This patch fixes these issues by using the new timing and context
entry/exit helpers to ensure that interrupts are handled during guest
vtime but with RCU watching, with a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
Since instrumentation may make use of RCU, we must also ensure that no
instrumented code is run during the EQS. I've split out the critical
section into a new kvm_arm_enter_exit_vcpu() helper which is marked
noinstr.
Fixes:
1b3d546daf85ed2b ("arm/arm64: KVM: Properly account for guest CPU time")
Reported-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Message-Id: <
20220201132926.3301912-3-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Tue, 1 Feb 2022 13:29:22 +0000 (13:29 +0000)]
kvm: add guest_state_{enter,exit}_irqoff()
commit
ef9989afda73332df566852d6e9ca695c05f10ce upstream.
When transitioning to/from guest mode, it is necessary to inform
lockdep, tracing, and RCU in a specific order, similar to the
requirements for transitions to/from user mode. Additionally, it is
necessary to perform vtime accounting for a window around running the
guest, with RCU enabled, such that timer interrupts taken from the guest
can be accounted as guest time.
Most architectures don't handle all the necessary pieces, and a have a
number of common bugs, including unsafe usage of RCU during the window
between guest_enter() and guest_exit().
On x86, this was dealt with across commits:
87fa7f3e98a1310e ("x86/kvm: Move context tracking where it belongs")
0642391e2139a2c1 ("x86/kvm/vmx: Add hardirq tracing to guest enter/exit")
9fc975e9efd03e57 ("x86/kvm/svm: Add hardirq tracing on guest enter/exit")
3ebccdf373c21d86 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text")
135961e0a7d555fc ("x86/kvm/svm: Move guest enter/exit into .noinstr.text")
160457140187c5fb ("KVM: x86: Defer vtime accounting 'til after IRQ handling")
bc908e091b326467 ("KVM: x86: Consolidate guest enter/exit logic to common helpers")
... but those fixes are specific to x86, and as the resulting logic
(while correct) is split across generic helper functions and
x86-specific helper functions, it is difficult to see that the
entry/exit accounting is balanced.
This patch adds generic helpers which architectures can use to handle
guest entry/exit consistently and correctly. The guest_{enter,exit}()
helpers are split into guest_timing_{enter,exit}() to perform vtime
accounting, and guest_context_{enter,exit}() to perform the necessary
context tracking and RCU management. The existing guest_{enter,exit}()
heleprs are left as wrappers of these.
Atop this, new guest_state_enter_irqoff() and guest_state_exit_irqoff()
helpers are added to handle the ordering of lockdep, tracing, and RCU
manageent. These are inteneded to mirror exit_to_user_mode() and
enter_from_user_mode().
Subsequent patches will migrate architectures over to the new helpers,
following a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
This sequences handles all of the above correctly, and more clearly
balances the entry and exit portions, making it easier to understand.
The existing helpers are marked as deprecated, and will be removed once
all architectures have been converted.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Message-Id: <
20220201132926.3301912-2-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Riwen Lu [Thu, 6 Jan 2022 08:46:09 +0000 (16:46 +0800)]
rtc: cmos: Evaluate century appropriate
commit
ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.
There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.
$ sudo date -s
20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00
Fixes:
2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Acked-by: Eric Wong <e@80x24.org>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Neftin [Tue, 7 Dec 2021 11:23:06 +0000 (13:23 +0200)]
e1000e: Separate ADP board type from TGP
commit
68defd528f94ed1cf11f49a75cc1875dccd781fa upstream.
We have the same LAN controller on different PCH's. Separate ADP board
type from a TGP which will allow for specific fixes to be applied for
ADP platforms.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Tue, 1 Feb 2022 21:25:04 +0000 (14:25 -0700)]
tools/resolve_btfids: Do not print any commands when building silently
commit
7f3bdbc3f13146eb9d07de81ea71f551587a384b upstream.
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes:
fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muhammad Usama Anjum [Thu, 27 Jan 2022 17:44:46 +0000 (22:44 +0500)]
selftests: futex: Use variable MAKE instead of make
commit
b9199181a9ef8252e47e207be8c23e1f50662620 upstream.
Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:
make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Fixes:
a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muhammad Usama Anjum [Thu, 27 Jan 2022 16:33:45 +0000 (21:33 +0500)]
selftests/exec: Remove pipe from TEST_GEN_FILES
commit
908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream.
pipe named FIFO special file is being created in execveat.c to perform
some tests. Makefile doesn't need to do anything with the pipe. When it
isn't found, Makefile generates the following build error:
make: *** No rule to make target
'../tools/testing/selftests/exec/pipe', needed by 'all'. Stop.
pipe is created and removed during test run-time.
Amended change log to add pipe remove info:
Shuah Khan <skhan@linuxfoundation.org>
Fixes:
61016db15b8e ("selftests/exec: Verify execve of non-regular files fail")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hou Tao [Wed, 2 Feb 2022 06:01:58 +0000 (14:01 +0800)]
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
commit
b293dcc473d22a62dc6d78de2b15e4f49515db56 upstream.
After commit
2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.
After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user
Fixes:
457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyue Wang [Fri, 28 Jan 2022 10:47:14 +0000 (18:47 +0800)]
gve: fix the wrong AdminQ buffer queue index check
commit
1f84a9450d75e08af70d9e2f2d5e1c0ac0c881d2 upstream.
The 'tail' and 'head' are 'unsigned int' type free-running count, when
'head' is overflow, the 'int i (= tail) < u32 head' will be false:
Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type
to compare, it can handle the overflow correctly.
typedef uint32_t u32;
int main()
{
u32 tail, head;
int stail, shead;
int i, loop;
tail = 0xffffffff;
head = 0x00000000;
for (i = tail, loop = 0; i < head; i++) {
unsigned int idx = i & 63;
printf("+ loop %d: idx = %u\n", loop++, idx);
}
stail = tail;
shead = head;
for (i = stail, loop = 0; i < shead; i++) {
unsigned int idx = i & 63;
printf("- loop %d: idx = %u\n", loop++, idx);
}
return 0;
}
Fixes:
5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dai Ngo [Wed, 26 Jan 2022 21:13:38 +0000 (13:13 -0800)]
nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.
commit
ab451ea952fe9d7afefae55ddb28943a148247fe upstream.
From RFC 7530 Section 16.34.5:
o The server has not recorded an unconfirmed { v, x, c, *, * } and
has recorded a confirmed { v, x, c, *, s }. If the principals of
the record and of SETCLIENTID_CONFIRM do not match, the server
returns NFS4ERR_CLID_INUSE without removing any relevant leased
client state, and without changing recorded callback and
callback_ident values for client { x }.
The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.
Fixes:
2b63482185e6 ("nfsd: fix clid_inuse on mount with security change")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Meneghini [Mon, 24 Jan 2022 14:51:10 +0000 (09:51 -0500)]
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe
commit
936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.
Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.
[ 1391.699147] BUG: using smp_processor_id() in preemptible [
00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188] dump_stack_lvl+0x57/0x7d
[ 1391.699198] check_preemption_disabled+0xc8/0xd0
[ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258] kthread+0x364/0x420
[ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268] ? set_kthread_struct+0x100/0x100
[ 1391.699273] ret_from_fork+0x22/0x30
Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.
Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes:
d576a5e80cd0 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Thu, 27 Jan 2022 21:50:31 +0000 (13:50 -0800)]
pinctrl: bcm2835: Fix a few error paths
commit
5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream.
After commit
266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio
hogs") a few error paths would not unwind properly the registration of
gpio ranges. Correct that by assigning a single error label and goto it
whenever we encounter a fatal error.
Fixes:
266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Łukasz Bartosik [Mon, 24 Jan 2022 12:55:29 +0000 (13:55 +0100)]
pinctrl: intel: fix unexpected interrupt
commit
e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream.
ASUS Chromebook C223 with Celeron N3350 crashes sometimes during
cold booot. Inspection of the kernel log showed that it gets into
an inifite loop logging the following message:
->handle_irq():
000000009cdb51e8, handle_bad_irq+0x0/0x251
->irq_data.chip():
000000005ec212a7, 0xffffa043009d8e7
->action(): 00000
IRQ_NOPROBE set
unexpected IRQ trap at vector 7c
The issue happens during cold boot but only if cold boot happens
at most several dozen seconds after Chromebook is powered off. For
longer intervals between power off and power on (cold boot) the issue
does not reproduce. The unexpected interrupt is sourced from INT3452
GPIO pin which is used for SD card detect. Investigation relevealed
that when the interval between power off and power on (cold boot)
is less than several dozen seconds then values of INT3452 GPIO interrupt
enable and interrupt pending registers survive power off and power
on sequence and interrupt for SD card detect pin is enabled and pending
during probe of SD controller which causes the unexpected IRQ message.
"Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc
mentions that GPIO interrupt enable and status registers default
value is 0x0.
The fix clears INT3452 GPIO interrupt enabled and interrupt pending
registers in its probe function.
Fixes:
7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Wed, 19 Jan 2022 18:19:15 +0000 (20:19 +0200)]
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
commit
e12963c453263d5321a2c610e98cbc731233b685 upstream.
The commit
af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer
when switching to GPIO") hadn't taken into account an update of the IRQ
flags scenario.
When updating the IRQ flags on the preconfigured line the ->irq_set_type()
is called again. In such case the sequential Rx buffer configuration
changes may trigger a falling or rising edge interrupt that may lead,
on some platforms, to an undesired event.
This may happen because each of intel_gpio_set_gpio_mode() and
__intel_gpio_set_direction() updates the pad configuration with a different
value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is
called only for the pads that are configured as an input. Due to this fact,
integrate the logic of __intel_gpio_set_direction() call into the
intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and
immediately re-enabled.
Fixes:
af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
Reported-by: Kane Chen <kane.chen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andre Przywara [Wed, 5 Jan 2022 17:29:52 +0000 (17:29 +0000)]
pinctrl: sunxi: Fix H616 I2S3 pin data
commit
1fd6bb5b47a65eacb063b37e6fa6df2b8fa92959 upstream.
Two bugs have sneaked in the H616 pinctrl data:
- PH9 uses the mux value of 0x3 twice (one should be 0x5 instead)
- PH8 and PH9 use the "i2s3" function name twice in each pin
For the double pin name we use the same trick we pulled for i2s0: append
the pin function to the group name to designate the special function.
Fixes:
25adc29407fb ("pinctrl: sunxi: Add support for the Allwinner H616 pin controller")
Reported-by: SASANO Takayoshi <uaa@mx5.nisiq.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220105172952.23347-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Wed, 26 Jan 2022 11:35:48 +0000 (11:35 +0000)]
ASoC: codecs: wcd938x: fix return value of mixer put function
commit
bd2347fd67d8da0fa76296507cc556da0a233bcb upstream.
wcd938x_ear_pa_put_gain, wcd938x_set_swr_port and wcd938x_set_compander
currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes:
e8ba1e05bdc01 ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Wed, 26 Jan 2022 11:35:47 +0000 (11:35 +0000)]
ASoC: codecs: lpass-rx-macro: fix sidetone register offsets
commit
fca041a3ab70a099a6d5519ecb689b6279bd04f3 upstream.
For some reason we ended up with incorrect register offfset calcuations
for sidetone. regmap clearly throw errors when accessing these incorrect
registers as these do not belong to any read/write ranges.
so fix them to point to correct register offsets.
Fixes:
f3ce6f3c9a99 ("ASoC: codecs: lpass-rx-macro: add iir widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Wed, 26 Jan 2022 11:35:46 +0000 (11:35 +0000)]
ASoC: codecs: wcd938x: fix incorrect used of portid
commit
c5c1546a654f613e291a7c5d6f3660fc1eb6d0c7 upstream.
Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.
Fixes:
e8ba1e05bdc0 ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 19 Jan 2022 12:31:01 +0000 (15:31 +0300)]
ASoC: max9759: fix underflow in speaker_gain_control_put()
commit
4c907bcd9dcd233da6707059d777ab389dcbd964 upstream.
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put()
Fixes:
fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiasheng Jiang [Tue, 11 Jan 2022 02:50:48 +0000 (10:50 +0800)]
ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name
commit
f7a6021aaf02088870559f82fc13c58cda7fea1a upstream.
If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.
Fixes:
f6cdf2d3445d ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Fri, 7 Jan 2022 21:47:10 +0000 (15:47 -0600)]
ASoC: simple-card: fix probe failure on platform component
commit
a64067f4cecaaa4deed8e33d3266bc0bcc189142 upstream.
A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.
Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.
Fixes:
f107294c6422 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Fri, 7 Jan 2022 21:47:06 +0000 (15:47 -0600)]
ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes
commit
e958b5884725dac86d36c1e7afe5a55f31feb0b2 upstream.
This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make
buffer bytes multiple of period bytes" by Devarsh Thakkar. The same
issue exists in the mainline version of the driver. The original
patch description is as follows:
"The Xilinx Audio Formatter IP has a constraint on period
bytes to be multiple of 64. This leads to driver changing
the period size to suitable frames such that period bytes
are multiple of 64.
Now since period bytes and period size are updated but not
the buffer bytes, this may make the buffer bytes unaligned
and not multiple of period bytes.
When this happens we hear popping noise as while DMA is being
done the buffer bytes are not enough to complete DMA access
for last period of frame within the application buffer boundary.
To avoid this, align buffer bytes too as multiple of 64, and
set another constraint to always enforce number of periods as
integer. Now since, there is already a rule in alsa core
to enforce Buffer size = Number of Periods * Period Size
this automatically aligns buffer bytes as multiple of period
bytes."
Fixes:
6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Thu, 27 Jan 2022 13:13:34 +0000 (13:13 +0000)]
ASoC: fsl: Add missing error handling in pcm030_fabric_probe
commit
fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.
Add the missing platform_device_put() and platform_device_del()
before return from pcm030_fabric_probe in the error handling case.
Fixes:
c912fa913446 ("ASoC: fsl: register the wm9712-codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Wed, 26 Jan 2022 03:46:58 +0000 (21:46 -0600)]
drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled
commit
e55a3aea418269266d84f426b3bd70794d3389c8 upstream.
dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.
Fixes:
e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 24 Jan 2022 12:24:09 +0000 (15:24 +0300)]
drm/i915/overlay: Prevent divide by zero bugs in scaling
commit
90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream.
Smatch detected a divide by zero bug in check_overlay_scaling().
drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
error: potential divide by zero bug '/ rec->dst_height'.
drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
error: potential divide by zero bug '/ rec->dst_width'.
Prevent this by ensuring that the dst height and width are non-zero.
Fixes:
02e792fbaadb ("drm/i915: implement drmmode overlay support v4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili
(cherry picked from commit
cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anitha Chrisanthus [Thu, 27 Jan 2022 18:45:46 +0000 (10:45 -0800)]
drm/kmb: Fix for build errors with Warray-bounds
commit
43f2517955875be5d96b641fba33d73097fe3cd9 upstream.
This fixes the following build error
drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable':
drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds]
165 | kmb->plane_status[plane_id].ctrl =
LCD_CTRL_GL2_ENABLE;
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~
In file included from drivers/gpu/drm/kmb/kmb_plane.c:17:
drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status'
61 | struct layer_status plane_status[KMB_MAX_PLANES];
| ^~~~~~~~~~~~
drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds]
162 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE;
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~
In file included from
drivers/gpu/drm/kmb/kmb_plane.c:17:
drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status'
61 | struct layer_status plane_status[KMB_MAX_PLANES];
|
^~~~~~~~~~~~
Fixes:
7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127194227.2213608-1-anitha.chrisanthus@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yannick Vignon [Thu, 3 Feb 2022 16:00:25 +0000 (17:00 +0100)]
net: stmmac: ensure PTP time register reads are consistent
commit
80d4609008e6d696a279e39ae7458c916fcd44c1 upstream.
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes:
92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Camel Guo [Mon, 31 Jan 2022 08:38:40 +0000 (09:38 +0100)]
net: stmmac: dump gmac4 DMA registers correctly
commit
7af037c39b600bac2c716dd1228e8ddbe149573f upstream.
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr
ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Fixes:
fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lior Nahmanson [Sun, 30 Jan 2022 11:37:52 +0000 (13:37 +0200)]
net: macsec: Verify that send_sci is on when setting Tx sci explicitly
commit
d0cfa548dbde354de986911d3913897b5448faad upstream.
When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.
Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.
Fixes:
c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lior Nahmanson [Sun, 30 Jan 2022 11:29:01 +0000 (13:29 +0200)]
net: macsec: Fix offload support for NETDEV_UNREGISTER event
commit
9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream.
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes:
3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jisheng Zhang [Fri, 28 Jan 2022 14:15:50 +0000 (22:15 +0800)]
net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()
commit
6449520391dfc3d2cef134f11a91251a054ff7d0 upstream.
There are two issues with runtime pm handling in stmmac_dvr_remove():
1. the mac is runtime suspended before stopping dma and rx/tx. We
need to ensure the device is properly resumed back.
2. the stmmaceth clk enable/disable isn't balanced in both exit and
error handling code path. Take the exit code path for example, when we
unbind the driver or rmmod the driver module, the mac is runtime
suspended as said above, so the stmmaceth clk is disabled, but
stmmac_dvr_remove()
stmmac_remove_config_dt()
clk_disable_unprepare()
CCF will complain this time. The error handling code path suffers
from the similar situtaion.
Here are kernel warnings in error handling code path on Allwinner D1
platform:
[ 1.604695] ------------[ cut here ]------------
[ 1.609328] bus-emac already disabled
[ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
[ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
[ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
[ 1.632443] Workqueue: events_unbound deferred_probe_work_func
[ 1.638286] epc : clk_core_disable+0xcc/0xec
[ 1.642561] ra : clk_core_disable+0xcc/0xec
[ 1.646835] epc :
ffffffff8023c2ec ra :
ffffffff8023c2ec sp :
ffffffd00411bb10
[ 1.654054] gp :
ffffffff80ec9988 tp :
ffffffe00143a800 t0 :
ffffffff80ed6a6f
[ 1.661272] t1 :
ffffffff80ed6a60 t2 :
0000000000000000 s0 :
ffffffe001509e00
[ 1.668489] s1 :
0000000000000001 a0 :
0000000000000019 a1 :
ffffffff80e80bd8
[ 1.675707] a2 :
00000000ffffefff a3 :
00000000000000f4 a4 :
0000000000000002
[ 1.682924] a5 :
0000000000000001 a6 :
0000000000000030 a7 :
00000000028f5c29
[ 1.690141] s2 :
0000000000000800 s3 :
ffffffe001375000 s4 :
ffffffe01fdf7a80
[ 1.697358] s5 :
ffffffe001375010 s6 :
ffffffff8001fc10 s7 :
ffffffffffffffff
[ 1.704577] s8 :
0000000000000001 s9 :
ffffffff80ecb248 s10:
ffffffe001b80000
[ 1.711794] s11:
ffffffe001b80760 t3 :
0000000000000062 t4 :
ffffffffffffffff
[ 1.719012] t5 :
ffffffff80e0f6d8 t6 :
ffffffd00411b8f0
[ 1.724321] status:
8000000201800100 badaddr:
0000000000000000 cause:
0000000000000003
[ 1.732233] [<
ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
[ 1.737810] [<
ffffffff80240430>] clk_disable+0x38/0x78
[ 1.742956] [<
ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 1.748451] [<
ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
[ 1.754646] [<
ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[ 1.760484] [<
ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 1.765975] [<
ffffffff8029a6c8>] platform_probe+0x64/0xf0
[ 1.771382] [<
ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[ 1.777305] [<
ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[ 1.783402] [<
ffffffff8029873c>] driver_probe_device+0x38/0x138
[ 1.789324] [<
ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[ 1.795508] [<
ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[ 1.802125] [<
ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[ 1.807701] [<
ffffffff80298d1c>] __device_attach+0xd8/0x184
[ 1.813277] [<
ffffffff802967b0>] bus_probe_device+0x98/0xbc
[ 1.818852] [<
ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[ 1.825122] [<
ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[ 1.830872] [<
ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[ 1.836362] [<
ffffffff80026bf4>] kthreadd+0x94/0x188
[ 1.841335] [<
ffffffff80026bf4>] kthreadd+0x94/0x188
[ 1.846304] [<
ffffffff8001fa60>] process_one_work+0x38c/0x390
[ 1.852054] [<
ffffffff80026564>] kthread+0x124/0x160
[ 1.857021] [<
ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[ 1.862770] [<
ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[ 1.868956] ---[ end trace
8d5c6046255f84a0 ]---
[ 1.873675] ------------[ cut here ]------------
[ 1.878366] bus-emac already unprepared
[ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
[ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
[ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
[ 1.903464] Workqueue: events_unbound deferred_probe_work_func
[ 1.909305] epc : clk_core_unprepare+0xe4/0x168
[ 1.913840] ra : clk_core_unprepare+0xe4/0x168
[ 1.918375] epc :
ffffffff8023d6cc ra :
ffffffff8023d6cc sp :
ffffffd00411bb10
[ 1.925593] gp :
ffffffff80ec9988 tp :
ffffffe00143a800 t0 :
0000000000000002
[ 1.932811] t1 :
ffffffe01f743be0 t2 :
0000000000000040 s0 :
ffffffe001509e00
[ 1.940029] s1 :
0000000000000001 a0 :
000000000000001b a1 :
ffffffe00143a800
[ 1.947246] a2 :
0000000000000000 a3 :
00000000000000f4 a4 :
0000000000000001
[ 1.954463] a5 :
0000000000000000 a6 :
0000000005fce2a5 a7 :
0000000000000001
[ 1.961680] s2 :
0000000000000800 s3 :
ffffffff80afeb90 s4 :
ffffffe01fdf7a80
[ 1.968898] s5 :
ffffffe001375010 s6 :
ffffffff8001fc10 s7 :
ffffffffffffffff
[ 1.976115] s8 :
0000000000000001 s9 :
ffffffff80ecb248 s10:
ffffffe001b80000
[ 1.983333] s11:
ffffffe001b80760 t3 :
ffffffff80b39120 t4 :
0000000000000001
[ 1.990550] t5 :
0000000000000000 t6 :
ffffffe001600002
[ 1.995859] status:
8000000201800120 badaddr:
0000000000000000 cause:
0000000000000003
[ 2.003771] [<
ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
[ 2.009609] [<
ffffffff802403a0>] clk_unprepare+0x24/0x3c
[ 2.014929] [<
ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
[ 2.021125] [<
ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[ 2.026965] [<
ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 2.032463] [<
ffffffff8029a6c8>] platform_probe+0x64/0xf0
[ 2.037871] [<
ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[ 2.043795] [<
ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[ 2.049892] [<
ffffffff8029873c>] driver_probe_device+0x38/0x138
[ 2.055815] [<
ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[ 2.061999] [<
ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[ 2.068616] [<
ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[ 2.074193] [<
ffffffff80298d1c>] __device_attach+0xd8/0x184
[ 2.079769] [<
ffffffff802967b0>] bus_probe_device+0x98/0xbc
[ 2.085345] [<
ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[ 2.091616] [<
ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[ 2.097367] [<
ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[ 2.102858] [<
ffffffff80026bf4>] kthreadd+0x94/0x188
[ 2.107830] [<
ffffffff80026bf4>] kthreadd+0x94/0x188
[ 2.112800] [<
ffffffff8001fa60>] process_one_work+0x38c/0x390
[ 2.118551] [<
ffffffff80026564>] kthread+0x124/0x160
[ 2.123520] [<
ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[ 2.129268] [<
ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[ 2.135455] ---[ end trace
8d5c6046255f84a1 ]---
Fixes:
5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuji Ishikawa [Thu, 27 Jan 2022 12:17:14 +0000 (21:17 +0900)]
net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected speed request.
commit
928d6fe996f69330ded6b887baf4534c5fac7988 upstream.
Variable clk_sel_val is not initialized in the default case of the first switch statement.
In that case, the function should return immediately without any changes to the hardware.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen Gu [Wed, 26 Jan 2022 15:33:04 +0000 (23:33 +0800)]
net/smc: Forward wakeup to smc socket waitqueue after fallback
commit
341adeec9adad0874f29a0a1af35638207352a39 upstream.
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107
RIP: 0010:__wake_up_common+0x65/0x170
Call Trace:
<IRQ>
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_data_queue+0x4a7/0xc40
tcp_rcv_established+0x32f/0x660
? sk_filter_trim_cap+0xcb/0x2e0
tcp_v4_do_rcv+0x10b/0x260
tcp_v4_rcv+0xd2a/0xde0
ip_protocol_deliver_rcu+0x3b/0x1d0
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0x6a/0x110
? tcp_v4_early_demux+0xa2/0x140
? tcp_v4_early_demux+0x10d/0x140
ip_sublist_rcv_finish+0x49/0x60
ip_sublist_rcv+0x19d/0x230
ip_list_rcv+0x13e/0x170
__netif_receive_skb_list_core+0x1c2/0x240
netif_receive_skb_list_internal+0x1e6/0x320
napi_complete_done+0x11d/0x190
mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
__napi_poll+0x3c/0x1b0
net_rx_action+0x27c/0x300
__do_softirq+0x114/0x2d2
irq_exit_rcu+0xb4/0xe0
common_interrupt+0xba/0xe0
</IRQ>
<TASK>
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries.
Fixes:
2153bd1e3d3d ("net/smc: Transfer remaining wait queue entries during fallback")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Tue, 25 Jan 2022 12:14:25 +0000 (13:14 +0100)]
net: ieee802154: Return meaningful error codes from the netlink helpers
commit
79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.
Returning -1 does not indicate anything useful.
Use a standard and meaningful error code instead.
Fixes:
a26c5fd7622d ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phil Sutter [Tue, 25 Jan 2022 19:06:03 +0000 (20:06 +0100)]
netfilter: nft_reject_bridge: Fix for missing reply from prerouting
commit
aeac4554eb549037ff2f719200c0a9c1c25e7eaa upstream.
Prior to commit
fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff
creation helpers"), nft_reject_bridge did not assign to nskb->dev before
passing nskb on to br_forward(). The shared skbuff creation helpers
introduced in above commit do which seems to confuse br_forward() as
reject statements in prerouting hook won't emit a packet anymore.
Fix this by simply passing NULL instead of 'dev' to the helpers - they
use the pointer for just that assignment, nothing else.
Fixes:
fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff creation helpers")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Tue, 25 Jan 2022 12:14:24 +0000 (13:14 +0100)]
net: ieee802154: ca8210: Stop leaking skb's
commit
621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream.
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.
Free the skb structure upon error before returning.
Fixes:
ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Tue, 25 Jan 2022 12:14:22 +0000 (13:14 +0100)]
net: ieee802154: mcr20a: Fix lifs/sifs periods
commit
d753c4004820a888ec007dd88b271fa9c3172c5c upstream.
These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.
Fixes:
8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Tue, 25 Jan 2022 12:14:21 +0000 (13:14 +0100)]
net: ieee802154: hwsim: Ensure proper channel selection at probe time
commit
1293fccc9e892712d910ec96079d3717307f1d2d upstream.
Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.
Fixes:
f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel]
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Zhang [Wed, 19 Jan 2022 08:37:55 +0000 (10:37 +0200)]
IB/cm: Release previously acquired reference counter in the cm_id_priv
commit
b856101a1774b5f1c8c99e8dfdef802856520732 upstream.
In failure flow, the reference counter acquired was not released,
and the following error was reported:
drivers/infiniband/core/cm.c:3373 cm_lap_handler() warn: inconsistent
refcounting 'cm_id_priv->refcount.refs.counter':
Fixes:
7345201c3963 ("IB/cm: Improve the calling of cm_init_av_for_lap and cm_init_av_by_path")
Link: https://lore.kernel.org/r/7615f23bbb5c5b66d03f6fa13e1c99d51dae6916.1642581448.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Sat, 15 Jan 2022 23:02:36 +0000 (18:02 -0500)]
IB/hfi1: Fix tstats alloc and dealloc
commit
e5cce44aff3be9ad2cd52f63f35edbd706181d50 upstream.
The tstats allocation is done in the accelerated ndo_init function but the
allocation is not tested to succeed.
The deallocation is not done in the accelerated ndo_uninit function.
Resolve issues by testing for an allocation failure and adding the
free_percpu in the uninit function.
Fixes:
aa0616a9bd52 ("IB/hfi1: switch to core handling of rx/tx byte/packet counters")
Link: https://lore.kernel.org/r/1642287756-182313-5-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Xiong [Tue, 25 Jan 2022 10:12:15 +0000 (18:12 +0800)]
spi: uniphier: fix reference count leak in uniphier_spi_probe()
commit
37c2c83ca4f1ef4b6908181ac98e18360af89b42 upstream.
The issue happens in several error paths in uniphier_spi_probe().
When either dma_get_slave_caps() or devm_spi_register_master() returns
an error code, the function forgets to decrease the refcount of both
`dma_rx` and `dma_tx` objects, which may lead to refcount leaks.
Fix it by decrementing the reference count of specific objects in
those error paths.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Fixes:
28d1dddc59f6 ("spi: uniphier: Add DMA transfer mode support")
Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Wed, 26 Jan 2022 11:04:47 +0000 (11:04 +0000)]
spi: meson-spicc: add IRQ check in meson_spicc_probe
commit
e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream.
This check misses checking for platform_get_irq()'s call and may passes
the negative error codes to devm_request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling devm_request_irq() with invalid IRQ #s.
Fixes:
454fa271bc4e ("spi: Add Meson SPICC driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Gaignard [Mon, 31 Jan 2022 14:17:08 +0000 (15:17 +0100)]
spi: mediatek: Avoid NULL pointer crash in interrupt
commit
f83a96e5f033fbbd21764705cb9c04234b96218e upstream.
In some case, like after a transfer timeout, master->cur_msg pointer
is NULL which led to a kernel crash when trying to use master->cur_msg->spi.
mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter
avoid the problem by setting NULL as second parameter.
Fixes:
a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kamal Dasu [Thu, 27 Jan 2022 18:53:59 +0000 (13:53 -0500)]
spi: bcm-qspi: check for valid cs before applying chip select
commit
2cbd27267ffe020af1442b95ec57f59a157ba85c upstream.
Apply only valid chip select value. This change fixes case where chip
select is set to initial value of '-1' during probe and PM supend and
subsequent resume can try to use the value with undefined behaviour.
Also in case where gpio based chip select, the check in
bcm_qspi_chip_select() shall prevent undefined behaviour on resume.
Fixes:
fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joerg Roedel [Fri, 4 Feb 2022 11:55:37 +0000 (12:55 +0100)]
iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()
commit
9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream.
The polling loop for the register change in iommu_ga_log_enable() needs
to have a udelay() in it. Otherwise the CPU might be faster than the
IOMMU hardware and wrongly trigger the WARN_ON() further down the code
stream. Use a 10us for udelay(), has there is some hardware where
activation of the GA log can take more than a 100ms.
A future optimization should move the activation check of the GA log
to the point where it gets used for the first time. But that is a
bigger change and not suitable for a fix.
Fixes:
8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guoqing Jiang [Fri, 28 Jan 2022 03:10:02 +0000 (11:10 +0800)]
iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()
commit
99e675d473eb8cf2deac1376a0f840222fc1adcf upstream.
After commit
e3beca48a45b ("irqdomain/treewide: Keep firmware node
unconditionally allocated"). For tear down scenario, fn is only freed
after fail to allocate ir_domain, though it also should be freed in case
dmar_enable_qi returns error.
Besides free fn, irq_domain and ir_msi_domain need to be removed as well
if intel_setup_irq_remapping fails to enable queued invalidation.
Improve the rewinding path by add out_free_ir_domain and out_free_fwnode
lables per Baolu's suggestion.
Fixes:
e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Ujfalusi [Tue, 1 Feb 2022 11:21:44 +0000 (13:21 +0200)]
ALSA: hda: Skip codec shutdown in case the codec is not registered
commit
1c7f0e349aa5f8f80b1cac3d4917405332e14cdf upstream.
If the codec->registered is not set then it means that pm_runtime is
not yet enabled and the codec->pcm_list_head has not been initialized.
The access to the not initialized pcm_list_head will lead a kernel crash
during shutdown.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Fixes:
b98444ed597d ("ALSA: hda: Suspend codec at shutdown")
Link: https://lore.kernel.org/r/20220201112144.29411-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 27 Jan 2022 13:57:17 +0000 (14:57 +0100)]
ALSA: hda: Fix signedness of sscanf() arguments
commit
0444f82766f0b5b9c8302ad802dafa5dd0e722d0 upstream.
The %x format of sscanf() takes an unsigned int pointer, while we pass
a signed int pointer. Practically it's OK, but this may result in a
compile warning. Let's fix it.
Fixes:
a235d5b8e550 ("ALSA: hda: Allow model option to specify PCI SSID alias")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220127135717.31751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Rix [Wed, 26 Jan 2022 18:21:42 +0000 (10:21 -0800)]
ALSA: usb-audio: initialize variables that could ignore errors
commit
3da4b7403db87d39bc2613cfd790de1de99a70ab upstream.
clang static analysis reports this representative issue
mixer.c:1548:35: warning: Assigned value is garbage or undefined
ucontrol->value.integer.value[0] = val;
^ ~~~
The filter_error() macro allows errors to be ignored.
If errors can be ignored, initialize variables
so garbage will not be used.
Fixes:
48cc42973509 ("ALSA: usb-audio: Filter error from connector kctl ops, too")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220126182142.1184819-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Mon, 31 Jan 2022 09:45:26 +0000 (11:45 +0200)]
RDMA/mlx4: Don't continue event handler after memory allocation failure
commit
f3136c4ce7acf64bee43135971ca52a880572e32 upstream.
The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE
event handler will cause skip the assignment logic, but
ib_dispatch_event() will be called anyway.
Fix it by calling to return instead of break after memory allocation
failure.
Fixes:
00f5ce99dc6e ("mlx4: Use port management change event instead of smp_snoop")
Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bernard Metzler [Sun, 30 Jan 2022 17:08:15 +0000 (18:08 +0100)]
RDMA/siw: Fix broken RDMA Read Fence/Resume logic.
commit
b43a76f423aa304037603fd6165c4a534d2c09a7 upstream.
Code unconditionally resumed fenced SQ processing after next RDMA Read
completion, even if other RDMA Read responses are still outstanding, or
ORQ is full. Also adds comments for better readability of fence
processing, and removes orq_get_tail() helper, which is not needed
anymore.
Fixes:
8b6a361b8c48 ("rdma/siw: receive path")
Fixes:
a531975279f3 ("rdma/siw: main include file")
Link: https://lore.kernel.org/r/20220130170815.1940-1-bmt@zurich.ibm.com
Reported-by: Jared Holzman <jared.holzman@excelero.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Wed, 19 Jan 2022 09:28:09 +0000 (04:28 -0500)]
IB/rdmavt: Validate remote_addr during loopback atomic tests
commit
4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream.
The rdma-core test suite sends an unaligned remote address and expects a
failure.
ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest)
The qib/hfi1 rc handling validates properly, but the test has the client
and server on the same system.
The loopback of these operations is a distinct code path.
Fix by syntaxing the proposed remote address in the loopback code path.
Fixes:
15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt")
Link: https://lore.kernel.org/r/1642584489-141005-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 18 Jan 2022 09:11:04 +0000 (12:11 +0300)]
RDMA/siw: Fix refcounting leak in siw_create_qp()
commit
a75badebfdc0b3823054bedf112edb54d6357c75 upstream.
The atomic_inc() needs to be paired with an atomic_dec() on the error
path.
Fixes:
514aee660df4 ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/20220118091104.GA11671@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Tue, 18 Jan 2022 07:35:01 +0000 (09:35 +0200)]
RDMA/ucma: Protect mc during concurrent multicast leaves
commit
36e8169ec973359f671f9ec7213547059cae972e upstream.
Partially revert the commit mentioned in the Fixes line to make sure that
allocation and erasing multicast struct are locked.
BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline]
BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579
Read of size 8 at addr
ffff88801bb74b00 by task syz-executor.1/25529
CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247
__kasan_report mm/kasan/report.c:433 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:450
ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline]
ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579
ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614
ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xae0 fs/read_write.c:588
ksys_write+0x1ee/0x250 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Currently the xarray search can touch a concurrently freeing mc as the
xa_for_each() is not surrounded by any lock. Rather than hold the lock for
a full scan hold it only for the effected items, which is usually an empty
list.
Fixes:
95fe51096b7a ("RDMA/ucma: Remove mc_list and rely on xarray")
Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com
Reported-by: syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maor Gottlieb [Tue, 18 Jan 2022 07:35:00 +0000 (09:35 +0200)]
RDMA/cma: Use correct address when leaving multicast group
commit
d9e410ebbed9d091b97bdf45b8a3792e2878dc48 upstream.
In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate
the mgid, otherwise we will generate an IGMP for an incorrect address.
Fixes:
b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Link: https://lore.kernel.org/r/913bc6783fd7a95fe71ad9454e01653ee6fb4a9a.1642491047.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Morse [Thu, 27 Jan 2022 12:20:51 +0000 (12:20 +0000)]
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
commit
1229630af88620f6e3a621a1ebd1ca14d9340df7 upstream.
Prior to commit
defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to
HYP"), when an SError is synchronised due to another exception, KVM
handles the SError first. If the guest survives, the instruction that
triggered the original exception is re-exectued to handle the first
exception. HVC is treated as a special case as the instruction wouldn't
normally be re-exectued, as its not a trap.
Commit
defe21f49bc9 didn't preserve the behaviour of the 'return 1'
that skips the rest of handle_exit().
Since commit
defe21f49bc9, KVM will try to handle the SError and the
original exception at the same time. When the exception was an HVC,
fixup_guest_exit() has already rolled back ELR_EL2, meaning if the
guest has virtual SError masked, it will execute and handle the HVC
twice.
Restore the original behaviour.
Fixes:
defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127122052.1584324-4-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Morse [Thu, 27 Jan 2022 12:20:50 +0000 (12:20 +0000)]
KVM: arm64: Avoid consuming a stale esr value when SError occur
commit
1c71dbc8a179d99dd9bb7e7fc1888db613cf85de upstream.
When any exception other than an IRQ occurs, the CPU updates the ESR_EL2
register with the exception syndrome. An SError may also become pending,
and will be synchronised by KVM. KVM notes the exception type, and whether
an SError was synchronised in exit_code.
When an exception other than an IRQ occurs, fixup_guest_exit() updates
vcpu->arch.fault.esr_el2 from the hardware register. When an SError was
synchronised, the vcpu esr value is used to determine if the exception
was due to an HVC. If so, ELR_EL2 is moved back one instruction. This
is so that KVM can process the SError first, and re-execute the HVC if
the guest survives the SError.
But if an IRQ synchronises an SError, the vcpu's esr value is stale.
If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2,
causing an unrelated guest instruction to be executed twice.
Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't
update this register so don't need to check.
Fixes:
defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP")
Cc: stable@vger.kernel.org
Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127122052.1584324-3-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sat, 5 Feb 2022 01:47:55 +0000 (17:47 -0800)]
Revert "ASoC: mediatek: Check for error clk pointer"
This reverts commit
38accfd85e41b7ca547c5a7d4866bbc1462950cb which is
commit
9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream
With this patch in the tree, Chromebooks running the affected hardware
no longer boot. Bisect points to this patch, and reverting it fixes
the problem.
An analysis of the code with this patch applied shows:
ret = init_clks(pdev, clk);
if (ret)
return ERR_PTR(ret);
...
for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
struct clk *c = clk[data->clk_id[j]];
if (IS_ERR(c)) {
dev_err(&pdev->dev, "%s: clk unavailable\n",
data->name);
return ERR_CAST(c);
}
scpd->clk[j] = c;
}
Not all clocks in the clk_names array have to be present. Only the clocks
in the data->clk_id array are actually needed. The code already checks if
the required clocks are available and bails out if not. The assumption that
all clocks have to be present is wrong, and commit
9de2b9286a6d needs to be
reverted.
Fixes:
9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer")
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com
Cc: Frank Wunderlich <frank-w@public-files.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Fri, 21 Jan 2022 00:35:27 +0000 (16:35 -0800)]
mptcp: fix msk traversal in mptcp_nl_cmd_set_flags()
commit
8e9eacad7ec7a9cbf262649ebf1fa6e6f6cc7d82 upstream.
The MPTCP endpoint list is under RCU protection, guarded by the
pernet spinlock. mptcp_nl_cmd_set_flags() traverses the list
without acquiring the spin-lock nor under the RCU critical section.
This change addresses the issue performing the lookup and the endpoint
update under the pernet spinlock.
[The upstream commit had to handle a lookup_by_id variable that is only
present in 5.17. This version of the patch removes that variable, so
the __lookup_addr() function only handles the lookup as it is
implemented in 5.15 and 5.16. It also removes one 'const' keyword to
prevent a warning due to differing const-ness in the 5.17 version of
addresses_equal().]
Fixes:
0f9f696a502e ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Wed, 2 Feb 2022 13:55:31 +0000 (14:55 +0100)]
fbcon: Add option to enable legacy hardware acceleration
commit
a3f781a9d6114c1d1e01defb7aa234dec45d2a5f upstream.
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.
If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.
For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.
In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.
In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Wed, 2 Feb 2022 13:55:30 +0000 (14:55 +0100)]
Revert "fbcon: Disable accelerated scrolling"
commit
87ab9f6b7417349aa197a6c7098d4fdd4beebb74 upstream.
This reverts commit
39aead8373b3c20bb5965c024dfb51a94e526151.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit
973c096f6a85).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Sat, 15 Jan 2022 23:02:35 +0000 (18:02 -0500)]
IB/hfi1: Fix AIP early init panic
commit
5f8f55b92edd621f056bdf09e572092849fabd83 upstream.
An early failure in hfi1_ipoib_setup_rn() can lead to the following panic:
BUG: unable to handle kernel NULL pointer dereference at
00000000000001b0
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
Workqueue: events work_for_cpu_fn
RIP: 0010:try_to_grab_pending+0x2b/0x140
Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c
RSP: 0018:
ffffb6b3cf7cfa48 EFLAGS:
00010046
RAX:
0000000000000246 RBX:
00000000000001b0 RCX:
0000000000000000
RDX:
0000000000000246 RSI:
0000000000000000 RDI:
00000000000001b0
RBP:
ffffb6b3cf7cfa70 R08:
0000000000000f09 R09:
0000000000000001
R10:
0000000000000000 R11:
0000000000000001 R12:
0000000000000000
R13:
ffffb6b3cf7cfa90 R14:
ffffffff9b2fbfc0 R15:
ffff8a4fdf244690
FS:
0000000000000000(0000) GS:
ffff8a527f400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000000001b0 CR3:
00000017e2410003 CR4:
00000000007706f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
__cancel_work_timer+0x42/0x190
? dev_printk_emit+0x4e/0x70
iowait_cancel_work+0x15/0x30 [hfi1]
hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1]
? dev_err+0x6c/0x90
hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1]
hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1]
rdma_init_netdev+0x5a/0x80 [ib_core]
? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1]
ipoib_intf_init+0x6c/0x350 [ib_ipoib]
ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib]
ipoib_add_one+0xbe/0x300 [ib_ipoib]
add_client_context+0x12c/0x1a0 [ib_core]
enable_device_and_get+0xdc/0x1d0 [ib_core]
ib_register_device+0x572/0x6b0 [ib_core]
rvt_register_device+0x11b/0x220 [rdmavt]
hfi1_register_ib_device+0x6b4/0x770 [hfi1]
do_init_one.isra.20+0x3e3/0x680 [hfi1]
local_pci_probe+0x41/0x90
work_for_cpu_fn+0x16/0x20
process_one_work+0x1a7/0x360
? create_worker+0x1a0/0x1a0
worker_thread+0x1cf/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x1f/0x40
The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL
deref when hfi1_ipoib_netdev_dtor() is called in this error case.
hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so
fix by adjusting the error paths accordingly.
Other changes:
- hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev()
since the netdev core code deletes calls free_netdev()
- The switch to the accelerated entrances is moved to the success path.
Cc: stable@vger.kernel.org
Fixes:
d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jordy Zomer [Sat, 29 Jan 2022 15:06:04 +0000 (16:06 +0100)]
dma-buf: heaps: Fix potential spectre v1 gadget
commit
92c4cfaee6872038563c5b6f2e8e613f9d84d47d upstream.
It appears like nr could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents
of kernel memory from being leaked to userspace via speculative
execution by using array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Fixes:
c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: added fixes and cc: stable tags]
Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin K. Petersen [Fri, 4 Feb 2022 03:42:09 +0000 (22:42 -0500)]
block: bio-integrity: Advance seed correctly for larger interval sizes
commit
b13e0c71856817fca67159b11abac350e41289f5 upstream.
Commit
309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.
The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Fixes:
309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lang Yu [Fri, 4 Feb 2022 04:49:37 +0000 (20:49 -0800)]
mm/kmemleak: avoid scanning potential huge holes
commit
c10a0f877fe007021d70f9cada240f42adc2b5db upstream.
When using devm_request_free_mem_region() and devm_memremap_pages() to
add ZONE_DEVICE memory, if requested free mem region's end pfn were
huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see
move_pfn_range_to_zone()). Thus it creates a huge hole between
node_start_pfn() and node_end_pfn().
We found on some AMD APUs, amdkfd requested such a free mem region and
created a huge hole. In such a case, following code snippet was just
doing busy test_bit() looping on the huge hole.
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
struct page *page = pfn_to_online_page(pfn);
if (!page)
continue;
...
}
So we got a soft lockup:
watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
RIP: 0010:pfn_to_online_page+0x5/0xd0
Call Trace:
? kmemleak_scan+0x16a/0x440
kmemleak_write+0x306/0x3a0
? common_file_perm+0x72/0x170
full_proxy_write+0x5c/0x90
vfs_write+0xb9/0x260
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
I did some tests with the patch.
(1) amdgpu module unloaded
before the patch:
real 0m0.976s
user 0m0.000s
sys 0m0.968s
after the patch:
real 0m0.981s
user 0m0.000s
sys 0m0.973s
(2) amdgpu module loaded
before the patch:
real 0m35.365s
user 0m0.000s
sys 0m35.354s
after the patch:
real 0m1.049s
user 0m0.000s
sys 0m1.042s
Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Fri, 4 Feb 2022 04:49:29 +0000 (20:49 -0800)]
mm/pgtable: define pte_index so that preprocessor could recognize it
commit
314c459a6fe0957b5885fbc65c53d51444092880 upstream.
Since commit
974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") pte_index is a static inline and there is
no define for it that can be recognized by the preprocessor. As a
result, vm_insert_pages() uses slower loop over vm_insert_page() instead
of insert_pages() that amortizes the cost of spinlock operations when
inserting multiple pages.
Link: https://lkml.kernel.org/r/20220111145457.20748-1-rppt@kernel.org
Fixes:
974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Christian Dietrich <stettberger@dokucode.de>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pasha Tatashin [Fri, 4 Feb 2022 04:49:10 +0000 (20:49 -0800)]
mm/debug_vm_pgtable: remove pte entry from the page table
commit
fb5222aae64fe25e5f3ebefde8214dcf3ba33ca5 upstream.
Patch series "page table check fixes and cleanups", v5.
This patch (of 4):
The pte entry that is used in pte_advanced_tests() is never removed from
the page table at the end of the test.
The issue is detected by page_table_check, to repro compile kernel with
the following configs:
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y
During the boot the following BUG is printed:
debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:162!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
...
The entry should be properly removed from the page table before the page
is released to the free list.
Link: https://lkml.kernel.org/r/20220131203249.2832273-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20220131203249.2832273-2-pasha.tatashin@soleen.com
Fixes:
a5c3b9ffb0f4 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uday Shankar [Thu, 20 Jan 2022 20:17:37 +0000 (12:17 -0800)]
nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()
commit
6a51abdeb259a56d95f13cc67e3a0838bcda0377 upstream.
Controller deletion/reset, immediately followed by or concurrent with
a reconnect, is hard failing the connect attempt resulting in a
complete loss of connectivity to the controller.
In the connect request, fabrics looks for an existing controller with
the same address components and aborts the connect if a controller
already exists and the duplicate connect option isn't set. The match
routine filters out controllers that are dead or dying, so they don't
interfere with the new connect request.
When NVME_CTRL_DELETING_NOIO was added, it missed updating the state
filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this
new state, it's seen as a live controller and fails the connect request.
Correct by adding the DELETING_NIO state to the match checks.
Fixes:
ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aun-Ali Zaidi [Sat, 29 Jan 2022 05:49:55 +0000 (05:49 +0000)]
drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
commit
30fbce374745a9c6af93c775a5ac49a97f822fda upstream.
The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'
4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Hsieh [Fri, 28 Jan 2022 14:03:57 +0000 (22:03 +0800)]
drm/amd/display: watermark latencies is not enough on DCN31
commit
f5fa54f45ab41cbb1f99b1208f49554132ffb207 upstream.
[Why]
The original latencies were causing underflow in some modes.
Resolution: 2880x1620@60p when HDR enable
[How]
1. Replace with the up-to-date watermark values based on new measurments
2. Correct the ddr_wm_table name to DDR5 on DCN31
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Evan Quan [Mon, 24 Jan 2022 05:40:35 +0000 (13:40 +0800)]
drm/amd/pm: correct the MGpuFanBoost support for Beige Goby
commit
3ec5586b4699cfb75cdfa09425e11d121db40773 upstream.
The existing way cannot handle Beige Goby well as a different
PPTable data structure(PPTable_beige_goby_t instead of PPTable_t)
is used there.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Wed, 26 Jan 2022 10:43:56 +0000 (12:43 +0200)]
drm/i915/adlp: Fix TypeC PHY-ready status readout
commit
3c6f13ad723e7206f03bb2752b01d18202b7fc9d upstream.
The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port
index, fix this up. This only caused an issue on TC#3/4 ports in legacy
mode, as in all other cases the two indices either match (on TC#1/2) or
the TCSS_DDI_STATUS_READY flag is set regardless of something being
connected or not (on TC#1/2/3/4 in dp-alt and tbt-alt modes).
Reported-and-tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Fixes:
55ce306c2aa1 ("drm/i915/adl_p: Implement TC sequences")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4698
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126104356.2022975-1-imre.deak@intel.com
(cherry picked from commit
516b33460c5bee78b2055637b0547bdb0e6af754)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Lopez [Sat, 22 Jan 2022 08:19:06 +0000 (01:19 -0700)]
drm/nouveau: fix off by one in BIOS boundary checking
commit
1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream.
Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.
This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.
Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes:
4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dominique Martinet [Sat, 29 Jan 2022 09:42:59 +0000 (18:42 +0900)]
Revert "fs/9p: search open fids first"
commit
22e424feb6658c5d6789e45121830357809c59cb upstream.
This reverts commit
478ba09edc1f2f2ee27180a06150cb2d1a686f9c.
That commit was meant as a fix for setattrs with by fd (e.g. ftruncate)
to use an open fid instead of the first fid it found on lookup.
The proper fix for that is to use the fid associated with the open file
struct, available in iattr->ia_file for such operations, and was
actually done just before in
66246641609b ("9p: retrieve fid from file
when file instance exist.")
As such, this commit is no longer required.
Furthermore, changing lookup to return open fids first had unwanted side
effects, as it turns out the protocol forbids the use of open fids for
further walks (e.g. clone_fid) and we broke mounts for some servers
enforcing this rule.
Note this only reverts to the old working behaviour, but it's still
possible for lookup to return open fids if dentry->d_fsdata is not set,
so more work is needed to make sure we respect this rule in the future,
for example by adding a flag to the lookup functions to only match
certain fid open modes depending on caller requirements.
Link: https://lkml.kernel.org/r/20220130130651.712293-1-asmadeus@codewreck.org
Fixes:
478ba09edc1f ("fs/9p: search open fids first")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: ron minnich <rminnich@gmail.com>
Reported-by: ng@0x80.stream
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Fri, 21 Jan 2022 15:44:39 +0000 (15:44 +0000)]
btrfs: fix use-after-free after failure to create a snapshot
commit
28b21c558a3753171097193b6f6602a94169093a upstream.
At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and
then attach it to the transaction's list of pending snapshots. After that
we call btrfs_commit_transaction(), and if that returns an error we jump
to 'fail' label, where we kfree() the pending snapshot structure. This can
result in a later use-after-free of the pending snapshot:
1) We allocated the pending snapshot and added it to the transaction's
list of pending snapshots;
2) We call btrfs_commit_transaction(), and it fails either at the first
call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups().
In both cases, we don't abort the transaction and we release our
transaction handle. We jump to the 'fail' label and free the pending
snapshot structure. We return with the pending snapshot still in the
transaction's list;
3) Another task commits the transaction. This time there's no error at
all, and then during the transaction commit it accesses a pointer
to the pending snapshot structure that the snapshot creation task
has already freed, resulting in a user-after-free.
This issue could actually be detected by smatch, which produced the
following warning:
fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list
So fix this by not having the snapshot creation ioctl directly add the
pending snapshot to the transaction's list. Instead add the pending
snapshot to the transaction handle, and then at btrfs_commit_transaction()
we add the snapshot to the list only when we can guarantee that any error
returned after that point will result in a transaction abort, in which
case the ioctl code can safely free the pending snapshot and no one can
access it anymore.
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shin'ichiro Kawasaki [Thu, 20 Jan 2022 11:09:16 +0000 (20:09 +0900)]
btrfs: fix deadlock between quota disable and qgroup rescan worker
commit
e804861bd4e69cc5fe1053eedcb024982dde8e48 upstream.
Quota disable ioctl starts a transaction before waiting for the qgroup
rescan worker completes. However, this wait can be infinite and results
in deadlock because of circular dependency among the quota disable
ioctl, the qgroup rescan worker and the other task with transaction such
as block group relocation task.
The deadlock happens with the steps following:
1) Task A calls ioctl to disable quota. It starts a transaction and
waits for qgroup rescan worker completes.
2) Task B such as block group relocation task starts a transaction and
joins to the transaction that task A started. Then task B commits to
the transaction. In this commit, task B waits for a commit by task A.
3) Task C as the qgroup rescan worker starts its job and starts a
transaction. In this transaction start, task C waits for completion
of the transaction that task A started and task B committed.
This deadlock was found with fstests test case btrfs/115 and a zoned
null_blk device. The test case enables and disables quota, and the
block group reclaim was triggered during the quota disable by chance.
The deadlock was also observed by running quota enable and disable in
parallel with 'btrfs balance' command on regular null_blk devices.
An example report of the deadlock:
[372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds.
[372.479944] Not tainted 5.16.0-rc8 #7
[372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000
[372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs]
[372.510782] Call Trace:
[372.514092] <TASK>
[372.521684] __schedule+0xb56/0x4850
[372.530104] ? io_schedule_timeout+0x190/0x190
[372.538842] ? lockdep_hardirqs_on+0x7e/0x100
[372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[372.555591] schedule+0xe0/0x270
[372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs]
[372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
[372.578875] ? free_unref_page+0x3f2/0x650
[372.585484] ? finish_wait+0x270/0x270
[372.591594] ? release_extent_buffer+0x224/0x420 [btrfs]
[372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs]
[372.607157] ? lock_release+0x3a9/0x6d0
[372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs]
[372.620960] ? do_raw_spin_lock+0x11e/0x250
[372.627137] ? rwlock_bug.part.0+0x90/0x90
[372.633215] ? lock_is_held_type+0xe4/0x140
[372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs]
[372.646268] process_one_work+0x7e9/0x1320
[372.652321] ? lock_release+0x6d0/0x6d0
[372.658081] ? pwq_dec_nr_in_flight+0x230/0x230
[372.664513] ? rwlock_bug.part.0+0x90/0x90
[372.670529] worker_thread+0x59e/0xf90
[372.676172] ? process_one_work+0x1320/0x1320
[372.682440] kthread+0x3b9/0x490
[372.687550] ? _raw_spin_unlock_irq+0x24/0x50
[372.693811] ? set_kthread_struct+0x100/0x100
[372.700052] ret_from_fork+0x22/0x30
[372.705517] </TASK>
[372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds.
[372.729827] Not tainted 5.16.0-rc8 #7
[372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000
[372.787776] Call Trace:
[372.801652] <TASK>
[372.812961] __schedule+0xb56/0x4850
[372.830011] ? io_schedule_timeout+0x190/0x190
[372.852547] ? lockdep_hardirqs_on+0x7e/0x100
[372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[372.886792] schedule+0xe0/0x270
[372.901685] wait_current_trans+0x22c/0x310 [btrfs]
[372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs]
[372.938923] ? finish_wait+0x270/0x270
[372.959085] ? join_transaction+0xc75/0xe30 [btrfs]
[372.977706] start_transaction+0x938/0x10a0 [btrfs]
[372.997168] transaction_kthread+0x19d/0x3c0 [btrfs]
[373.013021] ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs]
[373.031678] kthread+0x3b9/0x490
[373.047420] ? _raw_spin_unlock_irq+0x24/0x50
[373.064645] ? set_kthread_struct+0x100/0x100
[373.078571] ret_from_fork+0x22/0x30
[373.091197] </TASK>
[373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds.
[373.114147] Not tainted 5.16.0-rc8 #7
[373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[373.130393] task:btrfs state:D stack: 0 pid: 3145 ppid: 3141 flags:0x00004000
[373.140998] Call Trace:
[373.145501] <TASK>
[373.149654] __schedule+0xb56/0x4850
[373.155306] ? io_schedule_timeout+0x190/0x190
[373.161965] ? lockdep_hardirqs_on+0x7e/0x100
[373.168469] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[373.175468] schedule+0xe0/0x270
[373.180814] wait_for_commit+0x104/0x150 [btrfs]
[373.187643] ? test_and_set_bit+0x20/0x20 [btrfs]
[373.194772] ? kmem_cache_free+0x124/0x550
[373.201191] ? btrfs_put_transaction+0x69/0x3d0 [btrfs]
[373.208738] ? finish_wait+0x270/0x270
[373.214704] ? __btrfs_end_transaction+0x347/0x7b0 [btrfs]
[373.222342] btrfs_commit_transaction+0x44d/0x2610 [btrfs]
[373.230233] ? join_transaction+0x255/0xe30 [btrfs]
[373.237334] ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs]
[373.245251] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
[373.253296] relocate_block_group+0x105/0xc20 [btrfs]
[373.260533] ? mutex_lock_io_nested+0x1270/0x1270
[373.267516] ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs]
[373.275155] ? merge_reloc_roots+0x710/0x710 [btrfs]
[373.283602] ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs]
[373.291934] ? kmem_cache_free+0x124/0x550
[373.298180] btrfs_relocate_block_group+0x35c/0x930 [btrfs]
[373.306047] btrfs_relocate_chunk+0x85/0x210 [btrfs]
[373.313229] btrfs_balance+0x12f4/0x2d20 [btrfs]
[373.320227] ? lock_release+0x3a9/0x6d0
[373.326206] ? btrfs_relocate_chunk+0x210/0x210 [btrfs]
[373.333591] ? lock_is_held_type+0xe4/0x140
[373.340031] ? rcu_read_lock_sched_held+0x3f/0x70
[373.346910] btrfs_ioctl_balance+0x548/0x700 [btrfs]
[373.354207] btrfs_ioctl+0x7f2/0x71b0 [btrfs]
[373.360774] ? lockdep_hardirqs_on_prepare+0x410/0x410
[373.367957] ? lockdep_hardirqs_on_prepare+0x410/0x410
[373.375327] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
[373.383841] ? find_held_lock+0x2c/0x110
[373.389993] ? lock_release+0x3a9/0x6d0
[373.395828] ? mntput_no_expire+0xf7/0xad0
[373.402083] ? lock_is_held_type+0xe4/0x140
[373.408249] ? vfs_fileattr_set+0x9f0/0x9f0
[373.414486] ? selinux_file_ioctl+0x349/0x4e0
[373.420938] ? trace_raw_output_lock+0xb4/0xe0
[373.427442] ? selinux_inode_getsecctx+0x80/0x80
[373.434224] ? lockdep_hardirqs_on+0x7e/0x100
[373.440660] ? force_qs_rnp+0x2a0/0x6b0
[373.446534] ? lock_is_held_type+0x9b/0x140
[373.452763] ? __blkcg_punt_bio_submit+0x1b0/0x1b0
[373.459732] ? security_file_ioctl+0x50/0x90
[373.466089] __x64_sys_ioctl+0x127/0x190
[373.472022] do_syscall_64+0x3b/0x90
[373.477513] entry_SYSCALL_64_after_hwframe+0x44/0xae
[373.484823] RIP: 0033:0x7f8f4af7e2bb
[373.490493] RSP: 002b:
00007ffcbf936178 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[373.500197] RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
00007f8f4af7e2bb
[373.509451] RDX:
00007ffcbf936220 RSI:
00000000c4009420 RDI:
0000000000000003
[373.518659] RBP:
00007ffcbf93774a R08:
0000000000000013 R09:
00007f8f4b02d4e0
[373.527872] R10:
00007f8f4ae87740 R11:
0000000000000246 R12:
0000000000000001
[373.537222] R13:
00007ffcbf936220 R14:
0000000000000000 R15:
0000000000000002
[373.546506] </TASK>
[373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds.
[373.559383] Not tainted 5.16.0-rc8 #7
[373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[373.575748] task:btrfs state:D stack: 0 pid: 3146 ppid: 2168 flags:0x00000000
[373.586314] Call Trace:
[373.590846] <TASK>
[373.595121] __schedule+0xb56/0x4850
[373.600901] ? __lock_acquire+0x23db/0x5030
[373.607176] ? io_schedule_timeout+0x190/0x190
[373.613954] schedule+0xe0/0x270
[373.619157] schedule_timeout+0x168/0x220
[373.625170] ? usleep_range_state+0x150/0x150
[373.631653] ? mark_held_locks+0x9e/0xe0
[373.637767] ? do_raw_spin_lock+0x11e/0x250
[373.643993] ? lockdep_hardirqs_on_prepare+0x17b/0x410
[373.651267] ? _raw_spin_unlock_irq+0x24/0x50
[373.657677] ? lockdep_hardirqs_on+0x7e/0x100
[373.664103] wait_for_completion+0x163/0x250
[373.670437] ? bit_wait_timeout+0x160/0x160
[373.676585] btrfs_quota_disable+0x176/0x9a0 [btrfs]
[373.683979] ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs]
[373.691340] ? down_write+0xd0/0x130
[373.696880] ? down_write_killable+0x150/0x150
[373.703352] btrfs_ioctl+0x3945/0x71b0 [btrfs]
[373.710061] ? find_held_lock+0x2c/0x110
[373.716192] ? lock_release+0x3a9/0x6d0
[373.722047] ? __handle_mm_fault+0x23cd/0x3050
[373.728486] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
[373.737032] ? set_pte+0x6a/0x90
[373.742271] ? do_raw_spin_unlock+0x55/0x1f0
[373.748506] ? lock_is_held_type+0xe4/0x140
[373.754792] ? vfs_fileattr_set+0x9f0/0x9f0
[373.761083] ? selinux_file_ioctl+0x349/0x4e0
[373.767521] ? selinux_inode_getsecctx+0x80/0x80
[373.774247] ? __up_read+0x182/0x6e0
[373.780026] ? count_memcg_events.constprop.0+0x46/0x60
[373.787281] ? up_write+0x460/0x460
[373.792932] ? security_file_ioctl+0x50/0x90
[373.799232] __x64_sys_ioctl+0x127/0x190
[373.805237] do_syscall_64+0x3b/0x90
[373.810947] entry_SYSCALL_64_after_hwframe+0x44/0xae
[373.818102] RIP: 0033:0x7f1383ea02bb
[373.823847] RSP: 002b:
00007fffeb4d71f8 EFLAGS:
00000202 ORIG_RAX:
0000000000000010
[373.833641] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f1383ea02bb
[373.842961] RDX:
00007fffeb4d7210 RSI:
00000000c0109428 RDI:
0000000000000003
[373.852179] RBP:
0000000000000003 R08:
0000000000000003 R09:
0000000000000078
[373.861408] R10:
00007f1383daec78 R11:
0000000000000202 R12:
00007fffeb4d874a
[373.870647] R13:
0000000000493099 R14:
0000000000000001 R15:
0000000000000000
[373.879838] </TASK>
[373.884018]
Showing all locks held in the system:
[373.894250] 3 locks held by kworker/4:1/58:
[373.900356] 1 lock held by khungtaskd/63:
[373.906333] #0:
ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260
[373.917307] 3 locks held by kworker/u16:6/103:
[373.923938] #0:
ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320
[373.936555] #1:
ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320
[373.951109] #2:
ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs]
[373.964027] 2 locks held by less/1803:
[373.969982] #0:
ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80
[373.981295] #1:
ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060
[373.992969] 1 lock held by btrfs-transacti/2347:
[373.999893] #0:
ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs]
[374.015872] 3 locks held by btrfs/3145:
[374.022298] #0:
ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs]
[374.034456] #1:
ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs]
[374.047646] #2:
ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs]
[374.063295] 4 locks held by btrfs/3146:
[374.069647] #0:
ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs]
[374.081601] #1:
ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs]
[374.094283] #2:
ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs]
[374.106885] #3:
ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs]
[374.126780] =============================================
To avoid the deadlock, wait for the qgroup rescan worker to complete
before starting the transaction for the quota disable ioctl. Clear
BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to
request the worker to complete. On transaction start failure, set the
BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag
changes can be done safely since the function btrfs_quota_disable is not
called concurrently because of fs_info->subvol_sem.
Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid
another qgroup rescan worker to start after the previous qgroup worker
completed.
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Thu, 16 Dec 2021 11:47:35 +0000 (19:47 +0800)]
btrfs: don't start transaction for scrub if the fs is mounted read-only
commit
2d192fc4c1abeb0d04d1c8cd54405ff4a0b0255b upstream.
[BUG]
The following super simple script would crash btrfs at unmount time, if
CONFIG_BTRFS_ASSERT() is set.
mkfs.btrfs -f $dev
mount $dev $mnt
xfs_io -f -c "pwrite 0 4k" $mnt/file
umount $mnt
mount -r ro $dev $mnt
btrfs scrub start -Br $mnt
umount $mnt
This will trigger the following ASSERT() introduced by commit
0a31daa4b602 ("btrfs: add assertion for empty list of transactions at
late stage of umount").
That patch is definitely not the cause, it just makes enough noise for
developers.
[CAUSE]
We will start transaction for the following call chain during scrub:
scrub_enumerate_chunks()
|- btrfs_inc_block_group_ro()
|- btrfs_join_transaction()
However for RO mount, there is no running transaction at all, thus
btrfs_join_transaction() will start a new transaction.
Furthermore, since it's read-only mount, btrfs_sync_fs() will not call
btrfs_commit_super() to commit the new but empty transaction.
And leads to the ASSERT().
The bug has been there for a long time. Only the new ASSERT() makes it
noisy enough to be noticed.
[FIX]
For read-only scrub on read-only mount, there is no need to start a
transaction nor to allocate new chunks in btrfs_inc_block_group_ro().
Just do extra read-only mount check in btrfs_inc_block_group_ro(), and
if it's read-only, skip all chunk allocation and go inc_block_group_ro()
directly.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Lachner [Sat, 29 Jan 2022 11:32:43 +0000 (12:32 +0100)]
ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows
commit
ea3541961376f733373839cc90493aafa8a7f733 upstream.
This commit switches the Gigabyte X570 Aorus Xtreme from using the
ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes
the no-audio after reboot from windows problem.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-4-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log