Dave Airlie [Mon, 4 Feb 2019 04:56:52 +0000 (14:56 +1000)]
Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-next
ttm:
- Replace ref/unref naming with get/put
amdgpu:
- Revert DC clang fix, causes a segfault with some compiler versions
- SR-IOV fix
- PCIE fix for vega20
- Misc DC fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201062345.7304-1-alexander.deucher@amd.com
Dave Airlie [Mon, 4 Feb 2019 04:42:25 +0000 (14:42 +1000)]
Merge tag 'drm-misc-next-2019-02-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201144749.t3abxvguhstu6bcl@flea
Neil Armstrong [Fri, 1 Feb 2019 12:07:49 +0000 (12:07 +0000)]
drm/bridge: dw-hdmi: add support for YUV420 output
In order to support the HDMI2.0 YUV420 display modes, this patch
adds support for the YUV420 TMDS Clock divided by 2 and the controller
passthrough mode.
YUV420 Synopsys PHY support will need some specific configuration table
to support theses modes.
This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in
the Rockchip Linux 4.4 BSP at [1]
[1] https://github.com/rockchip-linux/kernel/tree/release-4.4
Cc: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-5-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Fri, 1 Feb 2019 12:07:48 +0000 (12:07 +0000)]
drm/meson: add support for HDMI2.0 2160p modes
Now we support the TMDS Clock > 3.4GHz and support the SCDC Control
operation in the DW-HDMI Controller, we can enable support for the
HDMI2.0 3840x2160@60/50 RGB444 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-4-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Fri, 1 Feb 2019 12:07:47 +0000 (12:07 +0000)]
drm/meson: add HDMI div40 TMDS mode
Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-3-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Fri, 1 Feb 2019 12:07:46 +0000 (12:07 +0000)]
drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
Scrambling when supported or mandatory.
This patch also adds an helper to setup the control bit to support
the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.
These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
on the Rockchip 4.4 BSP kernel at [1]
[1] https://github.com/rockchip-linux/kernel/tree/release-4.4
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com
Dave Airlie [Thu, 31 Jan 2019 23:51:23 +0000 (09:51 +1000)]
Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
This pull includes the new Arm "komeda" DRM driver. It is currently hosted
in the same repo as the other "mali-dp" driver because it is the next
iteration of the IP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131173600.GN25147@e110455-lin.cambridge.arm.com
Dave Airlie [Thu, 31 Jan 2019 23:34:49 +0000 (09:34 +1000)]
Merge tag 'drm-intel-next-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Track all runtime-PM wakerefs and other rpm improvements (Chris)
- Fix ILK-IVB primary plane enable delays (Juha-Pekka)
- Differentiate between gtt->mutex and ppgtt->mutex (Chris)
- Prevent concurrent GGTT update and use on Braswell (Chris)
- Fix CNL macros for DDI vswing (Aditya)
- Fix static code analysis warning (RK)
- Only dump GPU state on set-wedged if interesting (Chris)
- Port F detection improvements (Imre)
- userptr mutex lock fixes (Chris)
- Fix on MST allocation by propagating error value at compute_config (Lyude)
- Serialise concurrent calls to set_wedge (Chris)
- Unify reset functionality into i915_reset.c (Chris)
- Switch to kernel fixed size types (Jani)
- Limit the for_each_set_bit to the valid range (Chris)
- Fix wakeref cooie handling (Tvrtko)
- IRQs handling improvements (Chris)
- Selftests improvements (Chris)
- Remove superfluous PANEL_POWER_OFF macro (Jani)
- Global seqno fix (Chris)
- DSI fixes (Hans)
- Refactor out intel_context_init() (Chris)
- Show all active engines on hangcheck (Chris)
- PSR2 fixes and improvements (Jose)
- Do a posting read after irq install on Ice Lake (Daniele)
- Add few more device IDs for Ice Lake (Rodrigo)
- Mark up priority boost on preemption (Chris)
- Add color management LUT validation helper (Matt)
- Split out intel_crt_present to platform specific setup (Jani)
- LVDS and TV clean up and improvements (Jani)
- Simplify CRT VBT check for per-VLV/DDI (Jani)
- De-inline intel_context_init() (Chris)
- Backlight fixes (Maarten)
- Enable fastset for non-boot modesets (Maarten)
- Make HW readout mark CRTC scaler as in use (Maarten)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181000.GA5284@intel.com
Dave Airlie [Thu, 31 Jan 2019 04:19:45 +0000 (14:19 +1000)]
Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-next
New stuff for 5.1.
amdgpu:
- DC bandwidth formula updates
- Support for DCC on scanout surfaces
- Support for multiple IH rings on soc15 asics
- Fix xgmi locking
- Add sysfs interface to get pcie usage stats
- Simplify DC i2c/aux code
- Initial support for BACO on vega10/20
- New runtime SMU feature debug interface
- Expand existing sysfs power interfaces to new clock domains
- Handle kexec properly
- Simplify IH programming
- Rework doorbell handling across asics
- Drop old CI DPM implementation
- DC page flipping fixes
- Misc SR-IOV fixes
amdkfd:
- Simplify the interfaces between amdkfd and amdgpu
ttm:
- Add a callback to notify the driver when the lru changes
sched:
- Refactor mirror list handling
- Rework hw fence processing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125231517.26268-1-alexander.deucher@amd.com
Sean Paul [Tue, 29 Jan 2019 19:26:29 +0000 (14:26 -0500)]
drm/TODO: Add drm_display_mode.hsync/vrefresh removal
Drivers shouldn't be using these values, add a TODO so someone removes
them.
Changes in v2:
- Add drm_display_mode.vrefresh removal (Ville)
- Add Sam's R-b and bonus points
Changes in v3:
- Add hsync removal todo item (Daniel)
- Change vrefresh wording to make removal less optional
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Bonus-points-awarded-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run
Ville Syrjälä [Tue, 22 Jan 2019 20:03:01 +0000 (22:03 +0200)]
drm/dp/mst: Provide better debugs for NAK replies
Decode the NAK reply fields to make it easier to parse the logs.
v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day)
Use drm_dp_mst_req_type_str() more (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 22 Jan 2019 20:03:00 +0000 (22:03 +0200)]
drm/dp/mst: Provide defines for ACK vs. NAK reply type
Make the code a bit easier to read by providing symbolic names
for the reply_type (ACK vs. NAK). Also clean up some brace stuff
while at it.
v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK)
Fix some checkpatch issues
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-1-ville.syrjala@linux.intel.com
Daniel Vetter [Wed, 30 Jan 2019 16:30:05 +0000 (17:30 +0100)]
drm/doc: Drop chapter "KMS Initialization and Cleanup"
It only talks about crtc, brings up intel as an example and I think is
more misleading than useful really. Plus we have lots of discussion
about how your standard kms driver should be initialized/cleaned up,
so maybe better to document this when we have a better idea.
v2: Fix typo in commit message (Nicholas).
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-2-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 30 Jan 2019 16:30:04 +0000 (17:30 +0100)]
drm/doc: Move hdmi infoframe docs
.. next to all the other sink helpers. The rect library is more used
for handling plane clipping, so belongs to those imo.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-1-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 29 Jan 2019 13:21:53 +0000 (14:21 +0100)]
drm/doc: Task to rename CMA helpers
I'm kinda fed up explaining why the have a confusing name :-)
v2: Fix typo that Eric Engestrom spotted.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129132153.28844-1-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 30 Jan 2019 16:30:06 +0000 (17:30 +0100)]
drm/doc: fix VRR_ENABLED casing
Yes it's inconsitent with vrr_capable, but this is the actual uapi as
exercise by igt.
Fixes:
ab7a664f7a2d ("drm: Document variable refresh properties")
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-3-daniel.vetter@ffwll.ch
Gustavo A. R. Silva [Tue, 29 Jan 2019 20:20:06 +0000 (14:20 -0600)]
drm/savage: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/savage/savage_state.c:301:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:438:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:559:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:697:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129202005.GA25789@embeddedor
Gustavo A. R. Silva [Tue, 29 Jan 2019 20:17:42 +0000 (14:17 -0600)]
drm/via: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/via/via_dmablit.c:179:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:185:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:187:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:195:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129201742.GA25660@embeddedor
Dan Carpenter [Wed, 23 Jan 2019 09:37:55 +0000 (12:37 +0300)]
drm/komeda: Off by one in komeda_fb_get_pixel_addr()
The > should be >= to avoid an off by one bug.
Fixes:
c46c24bb6b11 ("drm/komeda: Add komeda_framebuffer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Gerd Hoffmann [Tue, 29 Jan 2019 08:25:41 +0000 (09:25 +0100)]
drm/qxl: use ttm_tt
qxl device will not dma, so we don't need ttm_dma_tt. Go use ttm_tt
instead, to avoid wasting resources (swiotlb bounce buffers for
example).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190129082541.1392-1-kraxel@redhat.com
shaoyunl [Mon, 28 Jan 2019 16:54:35 +0000 (11:54 -0500)]
drm/amdgpu: Show XGMI node and hive message per device only once
Reduce the repeated node and hive information during XGMI initialization
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 29 Jan 2019 16:55:42 +0000 (11:55 -0500)]
Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"
This reverts commit
10117450735c7a7c0858095fb46a860e7037cb9a.
Causes a crash.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109487
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 4.19
wentalou [Thu, 24 Jan 2019 03:24:59 +0000 (11:24 +0800)]
drm/amdgpu: sriov restrict max_pfn below AMDGPU_GMC_HOLE
sriov need to restrict max_pfn below AMDGPU_GMC_HOLE.
access the hole results in a range fault interrupt IIRC.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wentalou [Mon, 14 Jan 2019 08:26:13 +0000 (16:26 +0800)]
drm/amdgpu: csa_vaddr should not larger than AMDGPU_GMC_HOLE_START
After removing unnecessary VM size calculations,
vm_manager.max_pfn would reach 0x10,0000,0000
max_pfn << AMDGPU_GPU_PAGE_SHIFT exceeding AMDGPU_GMC_HOLE_START
would cause GPU reset.
Signed-off-by: wentalou <Wentao.Lou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Tue, 29 Jan 2019 10:42:48 +0000 (11:42 +0100)]
drm/irq: Ditch DRIVER_IRQ_SHARED
This is only used by drm_irq_install(), which is an optional helper.
For legacy pci devices this is required (due to interrupt sharing without
msi/msi-x), and just making this the default exactly matches the behaviour
of all existing drivers using the drm_irq_install() helpers. In case that
ever becomes wrong drivers can roll their own irq handling, as many
drivers already do (for other reasons like needing a threaded interrupt
handler, or having an entire pile of different interrupt sources).
v2: Rebase
v3: Improve commit message (Emil)
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-3-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 29 Jan 2019 10:42:47 +0000 (11:42 +0100)]
drm: Switch DRIVER_ flags to an enum
And move the documenation we alreay have into kerneldoc, plus a bit of
polish while at it.
v2:
- Ditch FIXME from commit message, I've resolved that already before
sending out the first version.
- Put the legacy DRIVER_ flags at the end (Sam).
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-2-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 29 Jan 2019 10:42:46 +0000 (11:42 +0100)]
drm/irq: Don't check for DRIVER_HAVE_IRQ in drm_irq_(un)install
If a non-legacy driver calls these it's valid to assume there is
interrupt support. The flag is really only needed for legacy drivers,
which control IRQ enabling/disabling through the DRM_IOCTL_CONTROL
legacy IOCTL.
Also remove all the flag usage from non-legacy drivers.
v2: Review from Emil:
- improve commit message
- I forgot hibmc, fix that
Cc: linux-arm-kernel@lists.infradead.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-1-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 24 Jan 2019 16:58:31 +0000 (17:58 +0100)]
drm/<drivers>: Don't set FBINFO_(FLAG_)DEFAULT
Both macros evaluate to 0. At the same time flag is already set to
zero since the struct is kzalloc'd in framebuffer_alloc().
As called by drm_fb_helper_alloc_fbi() in the DRM drivers.
v2: Rebase and improve commit message per Emil's suggestion.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 29 Jan 2019 08:56:43 +0000 (09:56 +0100)]
drm/doc: Add a warning to drm_dev_is_unplugged
It's probably not what you want, definitely not after Noralf's work to
add drm_dev_enter/exit.
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129085643.16357-1-daniel.vetter@ffwll.ch
Noralf Trønnes [Fri, 25 Jan 2019 15:03:00 +0000 (16:03 +0100)]
drm/fb-helper: generic: Fix drm_fbdev_client_restore()
If fbdev setup has failed, lastclose will give a NULL pointer deref:
[ 77.794295] [drm:drm_lastclose]
[ 77.794414] [drm:drm_lastclose] driver lastclose completed
[ 77.794660] Unable to handle kernel NULL pointer dereference at virtual address
00000014
[ 77.809460] pgd =
b376b71b
[ 77.818275] [
00000014] *pgd=
175ba831, *pte=
00000000, *ppte=
00000000
[ 77.830813] Internal error: Oops: 17 [#1] ARM
[ 77.840963] Modules linked in: mi0283qt mipi_dbi tinydrm raspberrypi_hwmon gpio_backlight backlight snd_bcm2835(C) bcm2835_rng rng_core
[ 77.865203] CPU: 0 PID: 527 Comm: lt-modetest Tainted: G C 5.0.0-rc1+ #1
[ 77.879525] Hardware name: BCM2835
[ 77.889185] PC is at restore_fbdev_mode+0x20/0x164
[ 77.900261] LR is at drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c
[ 78.002446] Process lt-modetest (pid: 527, stack limit = 0x7a3d5c14)
[ 78.291030] Backtrace:
[ 78.300815] [<
c04f2d0c>] (restore_fbdev_mode) from [<
c04f4708>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c)
[ 78.319095] r9:
d8a8a288 r8:
d891acf0 r7:
d7697910 r6:
00000000 r5:
d891ac00 r4:
d891ac00
[ 78.334432] [<
c04f46b4>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<
c04f47e8>] (drm_fbdev_client_restore+0x18/0x20)
[ 78.353296] r8:
d76978c0 r7:
d7697910 r6:
d7697950 r5:
d7697800 r4:
d891ac00 r3:
c04f47d0
[ 78.368689] [<
c04f47d0>] (drm_fbdev_client_restore) from [<
c051b6b4>] (drm_client_dev_restore+0x7c/0xc0)
[ 78.385982] [<
c051b638>] (drm_client_dev_restore) from [<
c04f8fd0>] (drm_lastclose+0xc4/0xd4)
[ 78.402332] r8:
d76978c0 r7:
d7471080 r6:
c0e0c088 r5:
d8a85e00 r4:
d7697800
[ 78.416688] [<
c04f8f0c>] (drm_lastclose) from [<
c04f9088>] (drm_release+0xa8/0x10c)
[ 78.431929] r5:
d8a85e00 r4:
d7697800
[ 78.442989] [<
c04f8fe0>] (drm_release) from [<
c02640c4>] (__fput+0x104/0x1c8)
[ 78.457740] r8:
d5ccea10 r7:
d96cfb10 r6:
00000008 r5:
d74c1b90 r4:
d8a8a280
[ 78.472043] [<
c0263fc0>] (__fput) from [<
c02641ec>] (____fput+0x18/0x1c)
[ 78.486363] r10:
00000006 r9:
d7722000 r8:
c01011c4 r7:
00000000 r6:
c0ebac6c r5:
d892a340
[ 78.501869] r4:
d8a8a280
[ 78.512002] [<
c02641d4>] (____fput) from [<
c013ef1c>] (task_work_run+0x98/0xac)
[ 78.527186] [<
c013ee84>] (task_work_run) from [<
c010cc54>] (do_work_pending+0x4f8/0x570)
[ 78.543238] r7:
d7722030 r6:
00000004 r5:
d7723fb0 r4:
00000000
[ 78.556825] [<
c010c75c>] (do_work_pending) from [<
c0101034>] (slow_work_pending+0xc/0x20)
[ 78.674256] ---[ end trace
70d3a60cf739be3b ]---
Fix by using drm_fb_helper_lastclose() which checks if fbdev is in use.
Fixes:
9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125150300.33268-1-noralf@tronnes.org
Eric Huang [Fri, 25 Jan 2019 21:29:25 +0000 (16:29 -0500)]
drm/amd/powerplay: add override pcie parameters for Vega20
It is to solve RDMA performance issue.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eugen Hristev [Mon, 14 Jan 2019 09:43:31 +0000 (09:43 +0000)]
drm/panel: simple: Add support for PDA 91-00156-A0 panel
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or
AC320005-5).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-4-git-send-email-eugen.hristev@microchip.com
Cristian Birsan [Mon, 14 Jan 2019 09:43:28 +0000 (09:43 +0000)]
dt-bindings: display: Add support for PDA 91-00156-A0 panel
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or
AC320005-5).
Adding device tree bindings for this panel.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[eugen.hristev@microchip.com]: specified backlight and supply bindings
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-3-git-send-email-eugen.hristev@microchip.com
Eugen Hristev [Mon, 14 Jan 2019 09:43:26 +0000 (09:43 +0000)]
dt-bindings: Add vendor prefix for PDA Precision Design Associates, Inc.
Precision Design Associates, Inc. (PDA) manufactures standard and custom
capacitive touch screens, LCD's embedded controllers and custom embedded
software. They specialize in industrial, rugged and outdoor
applications.
Website: http://www.pdaatl.com/
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-2-git-send-email-eugen.hristev@microchip.com
Paul Kocialkowski [Wed, 7 Nov 2018 18:18:41 +0000 (19:18 +0100)]
drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCD
This adds support for the 3.5" LCD panel from LeMaker, sold for use with
BananaPi boards. It comes with a 24-bit RGB888 parallel interface and
requires an active-low DE signal
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr
Paul Kocialkowski [Wed, 7 Nov 2018 18:18:40 +0000 (19:18 +0100)]
dt-bindings: display: Add bindings for the LeMaker BL035-RGB-002 LCD panel
This adds the device-tree bindings for the LeMaker BL035-RGB-002 3.5"
QVGA TFT LCD panel, compatible with simple-panel.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-6-contact@paulk.fr
Paul Kocialkowski [Wed, 7 Nov 2018 18:18:39 +0000 (19:18 +0100)]
dt-bindings: Add vendor prefix for LeMaker
This introduces a new device-tree binding vendor prefix for Shenzhen
LeMaker Technology Co., Ltd.
This vendor was already in use but it was not documented until now.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Hering <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-5-contact@paulk.fr
Nickey Yang [Tue, 30 Oct 2018 09:15:28 +0000 (10:15 +0100)]
drm/panel: Add Kingdisplay KD097D04 panel driver
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.
v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
already had applied them one kernel release back in
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=
ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
- real range for usleep_range and
- poweroff ordering in kingdisplay_panel_prepare
- return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
- error handling for init dsi writes in init
- unconditionally remove the panel
- don't use drm_panel_detach
- a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de
Jagan Teki [Thu, 24 Jan 2019 21:51:31 +0000 (03:21 +0530)]
drm/panel: Add Sitronix ST7701 panel driver
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.
Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com
Jagan Teki [Thu, 24 Jan 2019 21:51:30 +0000 (03:21 +0530)]
dt-bindings: display: Add Sitronix ST7701 panel documentation
Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI LCD panel
with inbuilt ST7701 chip.
The default regulator names in ST7701 chip is renamed in Techstar TS8550B
so, add specific binding names for them.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-1-jagan@amarulasolutions.com
Nicholas Kazlauskas [Mon, 28 Jan 2019 14:00:52 +0000 (09:00 -0500)]
drm/amd/display: Don't leak memory when updating streams
[Why]
The flip and full structures were allocated but never freed.
[How]
Free them at the end of the function. There's a small behavioral
change here with the function returning early if the allocation fails
but we wouldn't should be doing anything in that case anyway.
Fixes:
c00e0cc0fdc0 ("drm/amd/display: Call into DC once per multiplane flip")
Fixes:
ea39594e0855 ("drm/amd/display: Perform plane updates only when needed")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fatemeh Darbehani [Fri, 11 Jan 2019 16:00:26 +0000 (11:00 -0500)]
drm/amd/display: Add Vline1 interrupt source to InterruptManager
[Why]
Enhanced sync need to use vertical_interrupt1.
[How]
Add vertical_interrupt1 source to irq manger,
Implment setup vline interrupt interface.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 15 Jan 2019 15:33:58 +0000 (10:33 -0500)]
drm/amd/display: Re-enable CRC capture following modeset
[Why]
During any modeset the CRTC stream is removed and a new stream is added.
This new stream doesn't carry over CRC capture state if it was
previously set.
[How]
Re-program the stream for CRC capture. The existing DRM callback can
be re-used here for the most part - the only modification needed is
additional locking now that it's called from within commit tail.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 14 Jan 2019 21:04:10 +0000 (16:04 -0500)]
drm/amd/display: Enable vblank interrupt during CRC capture
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.
When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.
This issue was found running:
igt@kms_plane_multiple@atomic-pipe-b-tiling-none
The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.
[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Thu, 10 Jan 2019 05:05:15 +0000 (13:05 +0800)]
drm/amd/display: Poll pending down rep before clear payload allocation table
[Why]
On current design, driver cannot handle the interrupt for
down reply when link training is processing. The DOWN REQ
send before link training will keep in the pending DOWN REP
state in the queue.
It makes the next DOWN REQ be queued until time out.
[How]
To add a polling sequence before clear payload allocation table
to make sure the pending DOWN REP can be handled.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:11 +0000 (12:02 +0100)]
drm/ttm: Remove ttm_bo_reference and ttm_bo_unref
Both functions are obsolete and all calls have been replaced by
ttm_bo_get and ttm_bo_put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:10 +0000 (12:02 +0100)]
drm/mgag200: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:09 +0000 (12:02 +0100)]
drm/vmwgfx: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
In places where is might be necessary, the current behaviour of cleaning the
pointer is kept.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:08 +0000 (12:02 +0100)]
drm/vmwgfx: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:07 +0000 (12:02 +0100)]
drm/nouveau: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:06 +0000 (12:02 +0100)]
drm/nouveau: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Fri, 25 Jan 2019 11:02:05 +0000 (12:02 +0100)]
drm/ast: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:19 +0000 (13:20 +0100)]
drm/qxl: use kernel mode db
Add all standard modes from the kernel's video mode data base.
Keep a few non-standard modes in the qxl mode list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-23-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:18 +0000 (13:20 +0100)]
drm/qxl: add qxl_add_mode helper function
Add a helper function to add custom video modes to a connector.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-22-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:17 +0000 (13:20 +0100)]
drm/qxl: add mode/framebuffer check functions
Add a helper functions to check video modes. Also add a helper to check
framebuffer buffer objects, using the former for consistency. That way
we should not fail in qxl_primary_atomic_check() because video modes
which are too big will not be added to the mode list in the first place.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-21-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:16 +0000 (13:20 +0100)]
drm/qxl: implement qxl_gem_prime_(un)pin
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-20-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:15 +0000 (13:20 +0100)]
drm/qxl: remove dead qxl fbdev emulation code
Lovely diffstat, thanks to the new generic fbdev emulation.
drm/qxl/Makefile | 2
drm/qxl/qxl_draw.c | 232 ----------------------------------------
drm/qxl/qxl_drv.h | 21 ---
drm/qxl/qxl_fb.c | 300 -----------------------------------------------------
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-19-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:14 +0000 (13:20 +0100)]
drm/qxl: use generic fbdev emulation
Switch qxl over to the new generic fbdev emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-18-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:13 +0000 (13:20 +0100)]
drm/qxl: implement prime kmap/kunmap
Generic fbdev emulation needs this. Also: We must keep track of the
number of mappings now, so we don't unmap early in case two users want a
kmap of the same bo. Add a sanity check to destroy callback to make
sure kmap/kunmap is balanced.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-17-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:12 +0000 (13:20 +0100)]
drm/qxl: use qxl_num_crtc directly
qdev->monitors_config->max_allowed is effectively set by the
qxl.num_heads module parameter, stored in the qxl_num_crtc variable.
Lets get rid of the indirection and use the variable qxl_num_crtc
directly. The kernel doesn't need to dereference pointers each time it
needs the value, and when reading the code you don't have to trace where
and why qdev->monitors_config->max_allowed is set.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-16-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:11 +0000 (13:20 +0100)]
drm/qxl: cover all crtcs in shadow bo.
The qxl device supports only a single active framebuffer ("primary
surface" in spice terminology). In multihead configurations are handled
by defining rectangles within the primary surface for each head/crtc.
Userspace which uses the qxl ioctl interface (xorg qxl driver) is aware
of this limitation and will setup framebuffers and crtcs accordingly.
Userspace which uses dumb framebuffers (xorg modesetting driver,
wayland) is not aware of this limitation and tries to use two
framebuffers (one for each crtc) instead.
The qxl kms driver already has the dumb bo separated from the primary
surface, by using a (shared) shadow bo as primary surface. This is
needed to support pageflips without having to re-create the primary
surface. The qxl driver will blit from the dumb bo to the shadow bo
instead.
So we can extend the shadow logic: Maintain a global shadow bo (aka
primary surface), make it big enough that dumb bo's for all crtcs fit in
side-by-side. Adjust the pageflip blits to place the heads next to each
other in the shadow.
With this patch in place multihead qxl works with wayland.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-15-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:10 +0000 (13:20 +0100)]
drm/qxl: use shadow bo directly
Pass the shadow bo to qxl_io_create_primary() instead of expecting
qxl_io_create_primary to check bo->shadow. Set is_primary flag on the
shadow bo. Move the is_primary tracking into qxl_io_create_primary()
and qxl_io_destroy_primary() functions.
That simplifies primary surface tracking and the workflow in
qxl_primary_atomic_update().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-14-kraxel@redhat.com
qxl_io_create/destroy_primary: primary_bo tracking [fixup]
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:09 +0000 (13:20 +0100)]
drm/qxl: track primary bo
Track which bo is used as primary surface. With that in place we don't
need the primary_created flag any more, we can just check the primary bo
pointer instead.
Also verify we don't already have a primary surface in
qxl_io_create_primary().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-13-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:08 +0000 (13:20 +0100)]
drm/qxl: drop unused offset parameter from qxl_io_create_primary()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-12-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:07 +0000 (13:20 +0100)]
drm/qxl: move qxl_primary_apply_cursor to correct place
The qxl device ties the cursor to the primary surface. Therefore
calling qxl_io_destroy_primary() and qxl_io_create_primary() to switch
the framebuffer causes the cursor information being lost and the driver
must re-apply it.
The correct call order to do that is qxl_io_destroy_primary() +
qxl_io_create_primary() + qxl_primary_apply_cursor().
The old code did qxl_io_destroy_primary() + qxl_primary_apply_cursor() +
qxl_io_create_primary(). Due to qxl_primary_apply_cursor request being
queued in a ringbuffer and qxl_io_create_primary() trapping to the
hypervisor instantly there is a high chance that qxl_io_create_primary()
is processed first even with the wrong call order. But it's racy and
thus not reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-11-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:06 +0000 (13:20 +0100)]
drm/qxl: use QXL_GEM_DOMAIN_SURFACE for dumb gem objects
dumb buffers are used as qxl surfaces, so allocate them as
QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-10-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:05 +0000 (13:20 +0100)]
drm/qxl: use QXL_GEM_DOMAIN_SURFACE for shadow bo.
The shadow bo is used as qxl surface, so allocate it as
QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-9-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:04 +0000 (13:20 +0100)]
drm/qxl: allow both PRIV and VRAM placement for QXL_GEM_DOMAIN_SURFACE
qxl surfaces (used for framebuffers and gem objects) can live in both
VRAM and PRIV ttm domains. Update placement setup to include both.
Put PRIV first in the list so it is preferred, so VRAM will have more
room for objects which must be allocated there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-8-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:03 +0000 (13:20 +0100)]
drm/qxl: use separate offset spaces for the two slots / ttm memory types.
Without that ttm offsets are not unique, they can refer to objects
in both VRAM and PRIV memory (aka main and surfaces slot).
One of those "why things didn't blow up without this" moments.
Probably offset conflicts are rare enough by pure luck.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-7-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:02 +0000 (13:20 +0100)]
drm/qxl: drop unused fields from struct qxl_device
slot_id_bits and slot_gen_bits can be read directly from qxlrom instead.
va_slot_mask is never used anywhere.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-6-kraxel@redhat.com
Frediano Ziglio [Fri, 18 Jan 2019 12:20:01 +0000 (13:20 +0100)]
drm/qxl: change the way slot is detected
Instead of relaying on surface type use the actual placement.
This allow to have different placement for a single type of
surface.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-5-kraxel@redhat.com
[ kraxel: rebased, adapted to upstream changes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 18 Jan 2019 12:20:00 +0000 (13:20 +0100)]
drm/qxl: simplify slot management
Drop pointless indirection, remove the mem_slots array and index
variables, drop dynamic allocation. Store memslots in qxl_device
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-4-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:19:59 +0000 (13:19 +0100)]
drm/qxl: drop unused qxl_fb_virtual_address
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-3-kraxel@redhat.com
Gerd Hoffmann [Fri, 18 Jan 2019 12:19:58 +0000 (13:19 +0100)]
drm/qxl: drop ttm_mem_reg arg from qxl_hw_surface_alloc()
Not used, is always NULL.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-2-kraxel@redhat.com
Damian Kos [Mon, 19 Nov 2018 15:14:14 +0000 (15:14 +0000)]
drm/rockchip: fix for mailbox read validation.
This is basically the same fix as in
commit
fa68d4f8476b ("drm/rockchip: fix for mailbox read size")
but for cdn_dp_mailbox_validate_receive function.
See patchwork.kernel.org/patch/
10671981/ for details.
Signed-off-by: Damian Kos <dkos@cadence.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com
Heiko Stuebner [Sat, 26 Jan 2019 00:24:37 +0000 (01:24 +0100)]
drm/rockchip: check yuv2yuv existence before assigning window data
Before assigning window data, we should check if the yuv2yuv vop-data
is set at all, because it looks like it can otherwise reference something
wrong, as I saw on my rk3188 today which ended up in a null pointer
dereference in vop_plane_atomic_update when accessing the yuv2yuv data.
Fixes:
1c21aa8f2b68 ("drm/rockchip: Fix YUV buffers color rendering")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2556882.Heuq80WCVD@phil
Peter Rosin [Thu, 10 Jan 2019 15:10:44 +0000 (15:10 +0000)]
drm/atmel-hlcdc: fix clipping of planes
With the help from drm_atomic_helper_check_plane_state function, clipping
now handles planes to be partially or totally off-screen. The plane is
disabled if it is not visible.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-4-peda@axentia.se
Peter Rosin [Thu, 10 Jan 2019 15:10:39 +0000 (15:10 +0000)]
drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated
The destination crtc rectangle is independent of source plane rotation.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-3-peda@axentia.se
Peter Rosin [Thu, 10 Jan 2019 15:10:34 +0000 (15:10 +0000)]
drm/atmel-hlcdc: rotate planes counterclockwise
Ouch, the driver rotates planes clockwise, which is simply not correct.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-2-peda@axentia.se
ndesaulniers@google.com [Fri, 25 Jan 2019 00:52:59 +0000 (16:52 -0800)]
drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines
arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines.
Link: https://gcc.gnu.org/onlinedocs/gccint/Soft-float-library-routines.html
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Cc: stable@vger.kernel.org # 4.19
Reported-by: S, Shirish <Shirish.S@amd.com>
Reported-by: Matthias Kaehlcke <mka@google.com>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 25 Jan 2019 06:15:10 +0000 (14:15 +0800)]
drm/amd/powerplay: support Vega12 retrieving and setting ppfeatures
Enable retrieving and setting ppfeatures on Vega12.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 25 Jan 2019 06:12:40 +0000 (14:12 +0800)]
drm/amd/powerplay: support Vega12 SOCclk and DCEFclk dpm level settings
Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega12.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 25 Jan 2019 06:11:31 +0000 (14:11 +0800)]
drm/amd/powerplay: support Vega10 retrieving and setting ppfeatures
Enable retrieving and setting ppfeatures on Vega10.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 25 Jan 2019 06:09:40 +0000 (14:09 +0800)]
drm/amd/powerplay: support Vega10 SOCclk and DCEFclk dpm level settings
Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega10.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 24 Jan 2019 09:55:39 +0000 (17:55 +0800)]
drm/amd/powerplay: avoid frequent metrics table export
That's unnecessary. Also it makes more sense to show all the clocks
on one metrics table export.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 24 Jan 2019 09:50:39 +0000 (17:50 +0800)]
drm/amd/powerplay: correct Vega20 gfxclk readout under DS
Current implementation cannot report the correct gfxclk under DS.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Fri, 11 Jan 2019 17:43:20 +0000 (12:43 -0500)]
drm/amd/display: Connect dig_fe to otg directly instead of calling bios
[Why] After call bios table crtc_source_select, dal will program fmt
again. The bios table program dig_source_select and other fmt register
for bios usage which is redundancy and uncessary.
[How] Program dig_soruce_select register directly
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steven Chiu [Fri, 11 Jan 2019 21:55:54 +0000 (16:55 -0500)]
drm/amd/display: 3.2.15
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Fri, 11 Jan 2019 22:09:18 +0000 (17:09 -0500)]
drm/amd/display: take dpms_off into account for edp turn off logic
[why]
Previously we incorrectly skipped backlight control when stream is
present but dpms_off = true. This causes backlight to remain on in
the we boot up or resume into a external display only configuration
where VBIOS posted on the eDP.
[How]
Add dpms_off into the condition for edp need to turn off.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Fri, 11 Jan 2019 21:54:05 +0000 (16:54 -0500)]
revert "drm/amd/display: Add condition to sync eDP SW status and HW status"
[Why]
This change causes regression for S4 resume where gamma is not
programmed. The change incorrectly updates the requested dpms_off
state.
This reverts commit
d2b1d6bbc56afab8ebae9d52d7ca0ea3569bd600.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Thu, 10 Jan 2019 20:23:07 +0000 (15:23 -0500)]
drm/amd/display: Adjust ABM 2.2 contrast parameters
[Why]
Improved contrast in ABM 2.2 is desired
[How]
Increase the contrast factor for ABM levels 2, 3 and 4
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Tue, 8 Jan 2019 23:32:34 +0000 (18:32 -0500)]
drm/amd/display: Default to linear output gamma
[Why] Our output TF calculation doesn't work if no user-specified gamma
correction. Normally, user provides this, but driver sohuld just assume
default (linear) gamma otherwise.
[How] Remove output TF dependency on user gamma being provided.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Barberiz [Tue, 8 Jan 2019 22:43:08 +0000 (17:43 -0500)]
drm/amd/display: Fix use of uninitialized union
[Why]
An uninitialized variable would randomly initialize to a large
value. This caused enough delay to fail DP Compliance Test 400.2.1.
[How]
Initialize the variable.
Signed-off-by: John Barberiz <John.Barberiz@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Tue, 8 Jan 2019 19:46:05 +0000 (14:46 -0500)]
drm/amd/display: Create switching mechanism for ABM 2.2
[Why]
Need method of detecting which version of the DMCU FW is loaded and
load the appropriate iRAM.
[How]
Create definition for ABM 2.2 iRAM, and load it if the DMCU FW version
number matches the ABM 2.2 version; otherwise load ABM 2.1 iRAM.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Tue, 8 Jan 2019 19:43:10 +0000 (14:43 -0500)]
drm/amd/display: Update DMCU versioning mechanism
[Why]
Current date based versioning doesn't tell us about feature version
and build version, and is not useful for debug.
[How]
Add versioning based on feature and build
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Wed, 12 Dec 2018 19:11:53 +0000 (14:11 -0500)]
drm/amd/display: Know what a pageflip is
[Why]
We were assuming that any commit with allow_modeset == false
was a pageflip. This was against drm intention and only
worked by sheer luck
[How]
A pageflip is the change from one framebuffer to another
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Wed, 19 Dec 2018 15:45:16 +0000 (10:45 -0500)]
drm/amd/display: Perform plane updates only when needed
[Why]
Our old logic: if pageflip, update freesync and plane address.
Otherwise, update everything.
This over-updated on non-pageflip cases, and it failed to
update if pageflip and non-pageflip changes occurred on
the same commit
[How]
Update flip_addrs on pageflips.
Update scaling_info when it changes.
Update color fields on color changes.
Updates plane_info always because we don't have a good way of
knowing when it needs to be updated.
Unfortunately, this means that every stream commit involves two
calls into DC. In particular, on pageflips there is a second,
pointless update that changes nothing but costs several
microseconds (about a 50% increase in time taken). The update is
fast, but there are comparisons and some useless programming.
Leave TODOs indicating dissatisfaction.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 11 Dec 2018 20:17:15 +0000 (15:17 -0500)]
drm/amd/display: Call into DC once per multiplane flip
[Why]
amdgpu_dm_commit_planes was performing multi-plane
flips incorrectly:
It waited for vblank once per flipped plane
It prepared flip ISR and acquired the corresponding vblank ref
once per plane, although it closed ISR and put the ref once
per crtc
It called into dc once per flipped plane, duplicating some work
[How]
Wait for vblank, get vblank ref, prepare flip ISR, and call into
DC only once, and only if there is a pageflip
Make freesync continue to update planes even if vrr information
has already been changed
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 18 Dec 2018 20:30:19 +0000 (15:30 -0500)]
drm/amd/display: Simplify underscan and ABM commit
[Why]
Underscan and ABM are connector properties but require updates
to DC stream state. Previously, on updates to these properties
the affected stream and all its planes were committed.
This is unnecessary; only a few fields on the stream need
to be changed.
[How]
If scaling or ABM have changed, change the stream and
create a stream update with those changes. Call
DC with only those fields.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Thu, 3 Jan 2019 19:38:06 +0000 (14:38 -0500)]
drm/amd/display: Let updates with no scaling changes be fast
[Why]
DC was assuming that any surface_update->scaling_info
meant the update was at least medium. However, if nothing
has changed there is no scaling to program, so there is
no problem with the update being fast
[How]
If every update flag is not set, the update is fast
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>