Wolfgang Denk [Sun, 27 Mar 2011 19:48:08 +0000 (21:48 +0200)]
Coding Style cleanup: remove trailing empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 27 Mar 2011 19:20:29 +0000 (21:20 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Tom Warren [Wed, 23 Feb 2011 09:54:31 +0000 (09:54 +0000)]
arm: Tegra2: Change mach-type to MACH_TYPE_SEABOARD due to mach-types.h update
Signed-off-by: Tom Warren <twarren@nvidia.com>
Chander Kashyap [Tue, 22 Mar 2011 01:40:50 +0000 (01:40 +0000)]
S5P: mmc: Resolved interrupt error during mmc_init
Blocksize was hardcoded to 512 bytes. But the blocksize varies
depeding on various mmc subsystem commands (between 8 and 512).
This hardcoding was resulting in interrupt error during data
transfer.
It is now calculated based upon the request sent by mmc subsystem.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Tue, 22 Mar 2011 01:29:38 +0000 (01:29 +0000)]
ARMV7: S5P: Fixed register offset in mmc.h
The MMC registers are accessed through struct s5p_mmc member
variables. MMC controller "control4" register offset is set
to 0x8C as per data sheet. The size of struct s5p_mmc is also
corrected.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 16 Mar 2011 11:09:20 +0000 (20:09 +0900)]
S5P: timer: replace bss variable by gd
Use the global data instead of bss variable, replace as follow.
count_value -> removed
timestamp -> tbl
lastdec -> lastinc
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Albert ARIBAUD <albert.aribaud@free.fr>
Minkyu Kang [Thu, 10 Mar 2011 11:10:38 +0000 (20:10 +0900)]
S5P: universal: Enable the pwm driver
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 10 Mar 2011 11:10:19 +0000 (20:10 +0900)]
S5P: goni: Enable the pwm driver
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 10 Mar 2011 11:09:43 +0000 (20:09 +0900)]
S5P: smdkc100: Enable the pwm driver
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 10 Mar 2011 11:05:58 +0000 (20:05 +0900)]
S5P: timer: Use pwm functions
Use pwm functions for timer that is PWM timer 4.
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Donghwa Lee [Mon, 7 Mar 2011 21:11:42 +0000 (21:11 +0000)]
ARM: S5P: pwm driver support
This is common pwm driver of S5P.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
seedshope [Sat, 22 Jan 2011 10:06:14 +0000 (10:06 +0000)]
SMDK6400: Fixup dram_init for relocation support
Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
seedshope [Sat, 22 Jan 2011 10:06:13 +0000 (10:06 +0000)]
SMDK6400: Disable LED function in start.s on the nand booting
Since nand boot have some limit for the first 4KB, We only
disable the LED function to reduce the code space. At the
same time, Fix the compile error for LED function undefined
in the compile time of nand_spl.
Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
seedshope [Sat, 22 Jan 2011 10:06:12 +0000 (10:06 +0000)]
SMDK6400: Add some labels to u-boot.lds to support nand_spl
In the nand_spl feature of SMDK6400. Add some relocation symbols to
nand_spl/board/samsung/smdk6400/u-boot.lds to fix the compile error.
Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
seedshope [Sat, 22 Jan 2011 10:06:11 +0000 (10:06 +0000)]
SMDK6400: Fix the mutiple link error
The first, the cpu_init.o have already been link for cmd_link_o_target
atfer compile, But, The link script re-link the point file. So the link
machine will generate multiple definition error information.
The second, Since the first 4kB of nand boot featue code move to nand_spl,
So It is not necessary to force the cpu_init.o in non-nand boot.
Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
seedshope [Sat, 22 Jan 2011 10:06:10 +0000 (10:06 +0000)]
SMDK6400: Fix some label undefined in build error
Modify Makefile for cpu_init.c and Start.s use some label,this defined
u-boot.lds of arch/arm/cpu/arm1176. But SMDK6400 use the link script
board/samsung/smdk6400/u-boot-nand.lds. So add some label form u-boot.lds
to u-boot-nand.lds
Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
seedshope [Sat, 22 Jan 2011 10:06:09 +0000 (10:06 +0000)]
SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined
Fix CONFIG_SYS_INIT_SP_ADDR undefined issue.
Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Po-Yu Chuang [Tue, 1 Mar 2011 23:02:04 +0000 (23:02 +0000)]
arm: fix incorrect monitor protection region in FLASH
Monitor protection region in FLASH did not cover .rel.dyn
and .dynsym sections, because it uses __bss_start to compute
monitor_flash_len. Use _end instead.
Add _end to linker scripts for end of u-boot image
Add _end_ofs to all the start.S.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Po-Yu Chuang [Tue, 1 Mar 2011 22:59:59 +0000 (22:59 +0000)]
rename _end to __bss_end__
Currently, _end is used for end of BSS section. We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Prabhakar Kushwaha [Wed, 23 Mar 2011 09:21:13 +0000 (04:21 -0500)]
powerpc/85xx: Fix PCI memory map setup on P1_P2_RDB
Update the PCIe address map to match standard FSL memory map.
Additionally, fix the TLBs so the cover the PCIe address space properly
so cards plugged in like an e1000 work correctly.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Thu, 17 Mar 2011 18:18:13 +0000 (11:18 -0700)]
powerpc/mpc8xxx: fix workaround for errata DDR111 and DDR134
The fix for errata workaround is to avoid covering physical address
0xff000000 to 0xffffffff during the implementation.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Thu, 17 Mar 2011 18:18:12 +0000 (11:18 -0700)]
powerpc/mpc8xxx: disable rcw_en bit for non-DDR3
rcw_en bit is only available for DDR3 controllers. It is a reserved bit on
DDR1 and DDR2 controllers.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Thu, 17 Mar 2011 18:18:11 +0000 (11:18 -0700)]
powerpc/mpc8572ds: revise board specific timing for dual-rank DIMMs
Tested all possible values for clk_adjust and write_data_delay for dual
rank UDIMM and RDIMM to revise the tables.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Thu, 17 Mar 2011 18:18:10 +0000 (11:18 -0700)]
powerpc/mpc8xxx: fix recognition of DIMMs with ECC and Address Parity
To recognize DIMMs with ECC capability by testing ECC bit only. Not to be
confused by Address Parity bit.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Ed Swarthout [Sat, 5 Mar 2011 16:28:17 +0000 (10:28 -0600)]
strmhz: Make hz unsigned to support greater than 2146 MHz clock
For example, an input of 0x80000000 should print:
2147.484 instead of -2147.-483.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Haiying Wang [Tue, 22 Feb 2011 21:38:05 +0000 (16:38 -0500)]
Introduce a new linker flag LDFLAGS_FINAL
commit
8aba9dceebb14144e07d19593111ee3a999c37fc
Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS
breaks the usage of --gc-section to build nand_spl. We still need linker option
--gc-section for every uboot image, not only the main one. LDFLAGS_FINAL passes
the --gc-sections to each uboot image.
To get the proper linker flags, we use LDFLAGS and LDFLAGS_FINAL to replace
PLATFORM_LDFLAGS in the Makefile of each nand_spl board.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Peter Barada [Mon, 21 Mar 2011 23:05:20 +0000 (19:05 -0400)]
Fix hash table deletion to prevent lost entries
Use negative used value to mark deleted entry. Search keeps probing
past deleted entries. Adding an entry uses first deleted entry when
it hits end of probe chain.
Initially found that "ramdiskimage" and "preboot" collide modulus 347,
causing "preboot" to be inserted at idx 190, "ramdiskimage" at idx 191.
Previous to this fix when "preboot" is deleted, "ramdiskimage" is
orphaned.
Signed-off-by: Peter Barada <peter.barada@logicpd.com>
Tested-by: Wolfgang Denk <wd@denx.de>
Joakim Tjernlund [Mon, 17 Jan 2011 22:39:26 +0000 (23:39 +0100)]
Top config.mk: add include/config.mk
Seems to me that the top level config.mk should include
the auto generated include/config.mk so that all Makefile's
pickup those definitions.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Po-Yu Chuang [Fri, 21 Jan 2011 07:51:25 +0000 (15:51 +0800)]
net: ftmac100: update get_timer() usages
Use get_timer() the same way as drivers/net/ftgmac100.c
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Reviewed-by: Macpaul Lin <macpaul@gmail.com>
Tested-by: Macpaul Lin <macpaul@gmail.com>
Po-Yu Chuang [Fri, 21 Jan 2011 07:50:37 +0000 (15:50 +0800)]
net: ftmac100: remove unnecessary volatiles
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Reviewed-by: Macpaul Lin <macpaul@gmail.com>
Tested-by: Macpaul Lin <macpaul@gmail.com>
Heiko Schocher [Fri, 21 Jan 2011 06:23:35 +0000 (07:23 +0100)]
mpc52xx, digsy_mtc_rev5: Fix Linux crash, if no Flash in bank 2
If no Flash is connected to cs1, Linux crashes, because
reg entries are not correct adapted.
Following fix is needed:
- swap base addresses in CONFIG_SYS_FLASH_BANKS_LIST, as
flash bank 1 is on chipselect 0 and flash bank 2 on
chipselect 1
- call fdt_fixup_nor_flash_size() from ft_board_setup()
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <hs@denx.de>
cc: Werner Pfister <Pfister_Werner@intercontrol.de>
cc: Detlev Zundel <dzu@denx.de>
Wolfgang Denk [Mon, 21 Mar 2011 20:40:15 +0000 (21:40 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ubi
Wolfgang Denk [Mon, 21 Mar 2011 20:38:29 +0000 (21:38 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
Stefan Roese [Mon, 14 Mar 2011 13:34:21 +0000 (14:34 +0100)]
UBI: Fix error code handling in ubi commands
Some ubi commands returned negative error codes, resulting in
the following error message on the prompt:
"exit not allowed from main input shell."
Negative error codes are not allowed.
This patch now changes the UBI code to return positive error codes.
Additionally "better" error codes are used, for example "ENOMEM" when
no memory is available for the UBI volume creation any more.
Also the output of some commands is enhanced:
Before:
=> ubi read 100000 testvol 100000
Volume testvol found at volume id 0
read 1048576 bytes from volume 0 to 100000(buf address)
=> ubi write 100000 testvol 1000
Volume testvol found at volume id 0
After:
=> ubi read 100000 testvol 100000
Read 1048576 bytes from volume testvol to
00100000
=> ubi write 100000 testvol 1000
4096 bytes written to volume testvol
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Nobuhiro Iwamatsu [Mon, 7 Mar 2011 07:36:21 +0000 (16:36 +0900)]
sh: Add KEEP order to start.o section
The start.o section is changed by --gc-section option of ld.
Of this using KEEP order, therefore, evade this problem.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 7 Mar 2011 02:21:40 +0000 (11:21 +0900)]
sh: Add handling of CONFIG_SYS_NO_FLASH for board.c
Some board of SH does not have flash memoy.
This revises it to initialize Flash when CONFIG_SYS_NO_FLASH is not
defined.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Tue, 18 Jan 2011 08:53:45 +0000 (17:53 +0900)]
net: sh_eth: add support for SH7757's ETHER
SH7757 has ETHER and GETHER. This patch supports EHTER only.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Kumar Gala [Sun, 13 Mar 2011 15:55:53 +0000 (10:55 -0500)]
powerpc/85xx: Fix synchronization of timebase on MP boot
There is a small ordering issue in the master core in that we need to
make sure the disabling of the timebase in the SoC is visible before we
set the value to 0. We can simply just read back the value to
synchronizatize the write, before we set TB to 0.
Reported-by: Dan Hettena
Tested-by: Dan Hettena
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
John Schmoller [Thu, 10 Mar 2011 22:09:26 +0000 (16:09 -0600)]
mpc8[5/6]xx: Ensure POST word does not get reset
The POST word is stored in a spare register in the PIC on MPC8[5/6]xx
processors. When interrupt_init() is called, this register gets reset
which resulted in all POST_RAM POSTs not being ran due to the corrupted
POST word. To resolve this, store off POST word before the PIC is
reset, and restore it after the PIC has been initialized.
Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Priyanka Jain [Thu, 3 Mar 2011 03:48:56 +0000 (09:18 +0530)]
fsl_esdhc: Correcting esdhc timeout counter calculation
- Timeout counter value is set as DTOCV bits in SYSCTL register
For counter value set as timeout,
Timeout period = (2^(timeout + 13)) SD Clock cycles
- As per 4.6.2.2 section of SD Card specification v2.00, host should
cofigure timeout period value to minimum 0.25 sec.
- Number of SD Clock cycles for 0.25sec should be minimum
(SD Clock/sec * 0.25 sec) SD Clock cycles
= (mmc->tran_speed * 1/4) SD Clock cycles
- Calculating timeout based on
(2^(timeout + 13)) >= mmc->tran_speed * 1/4
Taking log2 both the sides and rounding up to next power of 2
=> timeout + 13 = log2(mmc->tran_speed/4) + 1
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Matthew McClintock [Fri, 25 Feb 2011 22:20:11 +0000 (16:20 -0600)]
powerpc/85xx: Fix pixis_reset altbank mask on MPC8536DS
Currently, pixis_reset altbank does not work properly. This patch
uses the correct mask to boot into the alternate bank.
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Ed Swarthout [Fri, 4 Mar 2011 00:28:14 +0000 (18:28 -0600)]
powerpc/85xx: Fix plat_mp_up() disabling of BPTR for CoreNet Platforms
Copying directly from ECM/PQ3 is not correct for how CoreNet based
platforms handle boot page translation.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Wed, 2 Mar 2011 22:24:12 +0000 (14:24 -0800)]
powerpc/corenet_ds: revise platform dependent parameters
This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based
on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Wed, 19 Jan 2011 23:37:33 +0000 (15:37 -0800)]
corenet_ds: pick the middle value for all tested timing parameters
For DDR3 controller, the clk_adjust and wrlvl_start are platform-dependent.
The best values should be picked up from the middle of all working
combinations. This patch updates the table with confirmed values tested on
Hynix dual-rank UDIMMs (HMT125U7BFR8C-H9) at 1300MT/s, 1200MT/s, 1000MT/s,
900MT/s, 800MT/s and Kingston quad-rank RDIMMs (KVR1333D3Q8R9S/4G) at 1300MT/s,
1200MT/s, 1000MT/s.
Signed-off-by: York Sun <yorksun@freescale.com>
York Sun [Wed, 2 Mar 2011 22:24:11 +0000 (14:24 -0800)]
powerpc/mpc8xxx: Fix DDR3 timing_cfg_1 and sdram_mode registers
The write recovery time of both registers should match. Since mode register
doesn't support cycles of 9,11,13,15, we should use next higher number for
both registers.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Sat, 12 Feb 2011 21:34:08 +0000 (15:34 -0600)]
fsl_law: Fix LAW printing function
We had an extra '0x' in the output of the LAWAR header that would cause
output like:
LAWBAR11: 0x00000000 LAWAR0x11: 0x80f0001d
intead of:
LAWBAR11: 0x00000000 LAWAR11: 0x80f0001d
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Sandeep Paulraj [Wed, 16 Feb 2011 11:15:45 +0000 (11:15 +0000)]
ARM: Update mach-types
This commit updates the mach-types based on the latest
in linus's head
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Fabio Estevam [Thu, 17 Feb 2011 14:27:41 +0000 (14:27 +0000)]
arm1136 relocation: Fix calculation of board_init_r
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Wed, 9 Feb 2011 01:17:54 +0000 (01:17 +0000)]
arm1136: Fix NAND boot
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Po-Yu Chuang [Tue, 15 Feb 2011 22:54:35 +0000 (22:54 +0000)]
arm: get_sp() should always be compiled
get_sp() was incorrectly excluded if none of
CONFIG_SETUP_MEMORY_TAGS
CONFIG_CMDLINE_TAG
CONFIG_INITRD_TAG
CONFIG_SERIAL_TAG
CONFIG_REVISION_TAG
were defined.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Lei Wen [Wed, 9 Feb 2011 12:47:47 +0000 (18:17 +0530)]
Pantheon: Add Board Support for Marvell dkb board
DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with
* Processor upto 806Mhz
* LPDDR1/2
* x8/x16 SLC/MLC NAND
* Footprints for eMMC & MMC x8 card
With Peripherals:
* Parallel LCD I/F
* Audio codecs (88PM8607)
* MIPI CSI-2 camera
* Marvell 88W8787 802.11n/BT module
* Marvell 2G/3G RF
* Dual analog mics & speakers, headset jack, LED, ambient
* USB2.0 HS host, OTG (mini AB)
* GPIO, GPIO expander with DIP switches for easier selection
* UART serial over USB, CIR
This patch adds basic board support with DRAM and UART functionality
Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Lei Wen [Wed, 9 Feb 2011 12:36:58 +0000 (18:06 +0530)]
mvmfp: add MFP configuration support for PANTHEON
This patch adds the Multiple Function Pin configuration support for
Marvell PANTHEON SoCs
Signed-off-by: Lei Wen <leiwen@marvell.com>
Lei Wen [Wed, 9 Feb 2011 12:36:58 +0000 (18:06 +0530)]
serial: add pantheon soc support
Signed-off-by: Lei Wen <leiwen@marvell.com>
Lei Wen [Wed, 9 Feb 2011 12:36:58 +0000 (18:06 +0530)]
ARM: Add Support for Marvell Pantheon Familiy SoCs
Pantheon Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref:
http://www.marvell.com/products/processors/communications/marvell_pantheon_910_920_pb.pdf
SoC versions Supported:
1) PANTHEON920 (TD)
2) PANTHEON910 (TTC)
Signed-off-by: Lei Wen <leiwen@marvell.com>
Lei Wen [Wed, 9 Feb 2011 12:36:58 +0000 (18:06 +0530)]
mv: seperate kirkwood and armada from common setting
Since there are lots of difference between kirkwood and armada series,
it is better to seperate them but still keep the most common file
shared by all marvell platform in the mv-common configure file.
This patch move the kirkwood only driver definitoin in mv-common to
the <soc_name>/config.h.
This patch is tested with compilation for armada100 and guruplug.
Signed-off-by: Lei Wen <leiwen@marvell.com>
Wolfgang Denk [Fri, 11 Feb 2011 12:25:48 +0000 (12:25 +0000)]
ARM: fix write*() I/O accessors
Commit 3c0659b "ARM: Avoid compiler optimization for readb, writeb
and friends." introduced I/O accessors with memory barriers.
Unfortunately the new write*() accessors introduced a bug:
The problem is that the argument "v" gets evaluated twice. This
breaks code like used here (from "drivers/net/dnet.c"):
for (i = 0; i < wrsz; i++)
writel(*bufp++, &dnet->regs->TX_DATA_FIFO);
Use auxiliary variables to avoid such problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Alexander Holler <holler@ahsoftware.de>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Alexander Stein [Thu, 3 Feb 2011 10:52:29 +0000 (10:52 +0000)]
arm relocation: Fix calculation of board_init_r
Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Tom Warren [Thu, 27 Jan 2011 10:58:08 +0000 (10:58 +0000)]
arm: Tegra2: Add support for NVIDIA Seaboard board
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tom Warren [Thu, 27 Jan 2011 10:58:07 +0000 (10:58 +0000)]
arm: Tegra2: Add support for NVIDIA Harmony board
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tom Warren [Thu, 27 Jan 2011 10:58:06 +0000 (10:58 +0000)]
serial: Add Tegra2 serial port support
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tom Warren [Thu, 27 Jan 2011 10:58:05 +0000 (10:58 +0000)]
arm: Tegra2: Add basic NVIDIA Tegra2 SoC support
Signed-off-by: Tom Warren <twarren@nvidia.com>
Fabio Estevam [Wed, 9 Feb 2011 01:17:56 +0000 (01:17 +0000)]
mx31pdk: Make the full boot log visible
Use board_early_init_f so that the full boot log output can be displayed.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Wed, 9 Feb 2011 01:17:55 +0000 (01:17 +0000)]
mx31pdk: Use the new relocation scheme
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Loïc Minier [Thu, 3 Feb 2011 04:19:09 +0000 (04:19 +0000)]
EfikaMX: switch to MACH_TYPE_MX51_EFIKAMX
Upstream linux moved from MACH_TYPE_MX51_LANGE51 to
MACH_TYPE_MX51_EFIKAMX.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Remy Bohmer [Sat, 19 Feb 2011 19:15:14 +0000 (20:15 +0100)]
Fix compile warning in net/eth.c
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Remy Bohmer [Sat, 19 Feb 2011 18:56:28 +0000 (19:56 +0100)]
Fix build warnings in cmd_flash.c
These variables are only used in case CONFIG_SYS_NO_FLASH is NOT set:
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Vitaly Kuzmichev [Fri, 11 Feb 2011 15:18:35 +0000 (18:18 +0300)]
USB-RNDIS: Send RNDIS state on disconnecting
Add waiting for receiving Ethernet gadget state on the Windows host
side before dropping pullup, but keep it for debug.
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Vitaly Kuzmichev [Fri, 11 Feb 2011 15:18:34 +0000 (18:18 +0300)]
USB: Add USB RNDIS gadget protocol
Port USB gadget RNDIS protocol support from linux-2.6.26
(.27 gadget stack actually has composite drivers).
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Vitaly Kuzmichev [Fri, 11 Feb 2011 15:18:33 +0000 (18:18 +0300)]
USB-CDC: Move struct declaration before its use
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Vitaly Kuzmichev [Fri, 11 Feb 2011 15:18:32 +0000 (18:18 +0300)]
USB-CDC: Port struct net_device_stats
Port struct net_device_stats and statistics collecting needed for
RNDIS protocol.
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Vitaly Kuzmichev [Fri, 11 Feb 2011 15:18:31 +0000 (18:18 +0300)]
USB-CDC: handle interrupt after dropped pullup
Disconnecting USB gadget with pending interrupt may cause its wrong
handling in the next time when interface will be started again
(especially actual for RNDIS). This interrupt may force the gadget
to queue unexpected response before setup stage.
Despite the fact that such interrupt handled after dropped pullup
also may add pending response, this will not bring to any issues due to
usb_ep_disable (which clears the queue) called on gadget unregistering.
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Simon Glass [Wed, 16 Feb 2011 19:14:34 +0000 (11:14 -0800)]
Add support for ASIX AX88772 USB 2.0 10/100Mbit Ethernet Adaptor
Driver originally written by NVIDIA Corporation, modified to
handle odd-length packets.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 16 Feb 2011 19:14:33 +0000 (11:14 -0800)]
Add USB host ethernet adapter support
This adds support for using USB Ethernet dongles in host mode. This is just
the framework - drivers will come later. A new config option called
CONFIG_USB_HOST_ETHER can be defined in board config files to switch this
on.
The was originally written by NVIDIA and was cleaned up for release by the
Chromium authors.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 7 Feb 2011 22:42:16 +0000 (14:42 -0800)]
Fix EHCI usb submit timeout and unify with OHCI
Changed both to use a common timeout for URB submission, since they were using
different values and EHCI's was too short.
Also fixed EHCI to actually check if urb submission succeeded, rather than
silently continuing into the weeds.
Change-Id: I7f71499ffaa05187d8e5618db2419e1606007b82
Signed-off-by: Simon Glass <sjg@chromium.org>
Yoshihiro Shimoda [Tue, 25 Jan 2011 00:28:19 +0000 (09:28 +0900)]
add checking the CONFIG_ENV_IS_IN_SPI_FLASH in Enbedded env
Fix the problem which cannot build the U-boot, if we only set
the CONFIG_ENV_IS_IN_SPI_FLASH.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Tue, 26 Oct 2010 11:32:00 +0000 (20:32 +0900)]
net: ne2000: Add spport RTL-8019AS
Add infomation of RTL-8016AS to hw_info.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Fri, 11 Feb 2011 19:20:51 +0000 (20:20 +0100)]
unzip: return uncompressed size in `filesize', and print it.
The unzip command did not provide a way for the caller to get any
information about the uncompressed size. To make it better usable in
scripts, we now store the uncompressed size in the `filesize'
variable, like we do when for example loading a file over the network
or when reading it from a file system. Following that analogy, it is
only consequent to also print the size.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 8 Feb 2011 15:56:05 +0000 (16:56 +0100)]
itest: fix result of string compares
The implementation of the string compare function of the "itest"
command was weird, as only the length of the shortest argument was
included in the compare, with the result that something like
"itest.s abd == abddef" would return TRUE. Fix this.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Michal Simek [Mon, 7 Feb 2011 09:33:50 +0000 (10:33 +0100)]
microblaze: Fix msr handling in interrupt_handler
Fix ancient code which worked with MSR in a bad way.
Use rtid instruction which enable IRQs and jump.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 7 Feb 2011 09:30:45 +0000 (10:30 +0100)]
microblaze: Fix systems with MSR=0
u-boot BSP generates XILINX_USE_MSR_INSTR macro
even for system with MSR=0. That's why explicitly
check that MSR=1.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Wolfgang Denk [Sat, 12 Feb 2011 19:37:47 +0000 (20:37 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mips
Graeme Russ [Sat, 12 Feb 2011 04:12:14 +0000 (15:12 +1100)]
eNET: Move initial Global Data into CAR
Graeme Russ [Sat, 12 Feb 2011 04:12:12 +0000 (15:12 +1100)]
sc520: Release CAR and enable caching
Graeme Russ [Sat, 12 Feb 2011 04:12:10 +0000 (15:12 +1100)]
x86: Convert board_init_f to use an init_sequence
Graeme Russ [Sat, 12 Feb 2011 04:12:08 +0000 (15:12 +1100)]
x86: Rearrange function calls in board_init_f
Graeme Russ [Sat, 12 Feb 2011 04:12:06 +0000 (15:12 +1100)]
x86: Split board_init_f() into init_fnc_t compatible functions
Graeme Russ [Sat, 12 Feb 2011 04:12:05 +0000 (15:12 +1100)]
x86: Fix incorrect usage of relocation offset
x86 has always used relocation offset in the opposite sense to the ELF
standard - Fix this
Graeme Russ [Sat, 12 Feb 2011 04:12:03 +0000 (15:12 +1100)]
x86: Move console initialisation into board_init_f
Graeme Russ [Sat, 12 Feb 2011 04:12:01 +0000 (15:12 +1100)]
x86: Move test for cold boot into init functions
Graeme Russ [Sat, 12 Feb 2011 04:11:59 +0000 (15:11 +1100)]
x86: Move call to dram_init_f into board_init_f
Graeme Russ [Sat, 12 Feb 2011 04:11:58 +0000 (15:11 +1100)]
x86: Defer setup of final stack
Graeme Russ [Sat, 12 Feb 2011 04:11:54 +0000 (15:11 +1100)]
sc520: Move RAM sizing code from asm to C
Graeme Russ [Sat, 12 Feb 2011 04:11:52 +0000 (15:11 +1100)]
x86: Use Cache-As-RAM for initial stack
Graeme Russ [Sat, 12 Feb 2011 04:11:50 +0000 (15:11 +1100)]
x86: Move initial gd to fixed location
Graeme Russ [Sat, 12 Feb 2011 04:11:48 +0000 (15:11 +1100)]
eNET: General code cleanup
Graeme Russ [Sat, 12 Feb 2011 04:11:47 +0000 (15:11 +1100)]
eNET: Rearrange PAR assignments
Graeme Russ [Sat, 12 Feb 2011 04:11:45 +0000 (15:11 +1100)]
eNET: Define MMCR values in config.h
Graeme Russ [Sat, 12 Feb 2011 04:11:43 +0000 (15:11 +1100)]
eNET: Add RTC support to eNET
The SC520 has an inbuilt MC146818 - Enable it for the eNET board
Graeme Russ [Sat, 12 Feb 2011 04:11:41 +0000 (15:11 +1100)]
eNET: Fix eNET Interrupt Setup for Linux
Fix minor issues with the configuration of the hardware interrupts for
Linux when booting the eNET board
Graeme Russ [Sat, 12 Feb 2011 04:11:40 +0000 (15:11 +1100)]
sc520: Remove printf calls from cpu_init_f
In later patches, cpu_init_f will be called before console has been
initialised and printf will not be legitimately available